Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	drivers/net/bonding/bond_3ad.h
	drivers/net/bonding/bond_main.c

Two minor conflicts in bonding, both of which were overlapping
changes.

Signed-off-by: David S. Miller <davem@davemloft.net>

13 files changed, 334 insertions, 82 deletions

diff --git a/Documentation/ABI/testing/sysfs-tty b/Documentation/ABI/testing/sysfs-tty
index ad22fb0ee76..a2ccec35ffc 100644
--- a/Documentation/ABI/testing/sysfs-tty
+++ b/Documentation/ABI/testing/sysfs-tty
@@ -3,7 +3,8 @@ Date:		Nov 2010
 Contact:	Kay Sievers <kay.sievers@vrfy.org>
 Description:
 		 Shows the list of currently configured
-		 console devices, like 'tty1 ttyS0'.
+		 tty devices used for the console,
+		 like 'tty1 ttyS0'.
 		 The last entry in the file is the active
 		 device connected to /dev/console.
 		 The file supports poll() to detect virtual
diff --git a/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt
index 0a85c70cd30..07ad02075a9 100644
--- a/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt
+++ b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt
@@ -13,6 +13,9 @@ Required properties:
 - #address-cells: should be one. The cell is the slot id.
 - #size-cells: should be zero.
 - at least one slot node
+- clock-names: tuple listing input clock names.
+	Required elements: "mci_clk"
+- clocks: phandles to input clocks.
 
 The node contains child nodes for each slot that the platform uses
 
@@ -24,6 +27,8 @@ mmc0: mmc@f0008000 {
 	interrupts = <12 4>;
 	#address-cells = <1>;
 	#size-cells = <0>;
+	clock-names = "mci_clk";
+	clocks = <&mci0_clk>;
 
 	[ child node definitions...]
 };
diff --git a/Documentation/devicetree/bindings/net/sti-dwmac.txt b/Documentation/devicetree/bindings/net/sti-dwmac.txt
new file mode 100644
index 00000000000..3dd3d0bf112
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/sti-dwmac.txt
@@ -0,0 +1,58 @@
+STMicroelectronics SoC DWMAC glue layer controller
+
+The device node has following properties.
+
+Required properties:
+ - compatible	: Can be "st,stih415-dwmac", "st,stih416-dwmac" or
+   "st,stid127-dwmac".
+ - reg		: Offset of the glue configuration register map in system
+   configuration regmap pointed by st,syscon property and size.
+
+ - reg-names	: Should be "sti-ethconf".
+
+ - st,syscon	: Should be phandle to system configuration node which
+   encompases this glue registers.
+
+ - st,tx-retime-src: On STi Parts for Giga bit speeds, 125Mhz clocks can be
+   wired up in from different sources. One via TXCLK pin and other via CLK_125
+   pin. This wiring is totally board dependent. However the retiming glue
+   logic should be configured accordingly. Possible values for this property
+
+	   "txclk" - if 125Mhz clock is wired up via txclk line.
+	   "clk_125" - if 125Mhz clock is wired up via clk_125 line.
+
+   This property is only valid for Giga bit setup( GMII, RGMII), and it is
+   un-used for non-giga bit (MII and RMII) setups. Also note that internal
+   clockgen can not generate stable 125Mhz clock.
+
+ - st,ext-phyclk: This boolean property indicates who is generating the clock
+  for tx and rx. This property is only valid for RMII case where the clock can
+  be generated from the MAC or PHY.
+
+ - clock-names: should be "sti-ethclk".
+ - clocks: Should point to ethernet clockgen which can generate phyclk.
+
+
+Example:
+
+ethernet0: dwmac@fe810000 {
+	device_type 	= "network";
+	compatible	= "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
+	reg 		= <0xfe810000 0x8000>, <0x8bc 0x4>;
+	reg-names	= "stmmaceth", "sti-ethconf";
+	interrupts	= <0 133 0>, <0 134 0>, <0 135 0>;
+	interrupt-names	= "macirq", "eth_wake_irq", "eth_lpi";
+	phy-mode	= "mii";
+
+	st,syscon	= <&syscfg_rear>;
+
+	snps,pbl 	= <32>;
+	snps,mixed-burst;
+
+	resets		= <&softreset STIH416_ETH0_SOFTRESET>;
+	reset-names	= "stmmaceth";
+	pinctrl-0	= <&pinctrl_mii0>;
+	pinctrl-names 	= "default";
+	clocks		= <&CLK_S_GMAC0_PHY>;
+	clock-names	= "stmmaceth";
+};
diff --git a/Documentation/devicetree/bindings/power/bq2415x.txt b/Documentation/devicetree/bindings/power/bq2415x.txt
new file mode 100644
index 00000000000..d0327f0b59a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/bq2415x.txt
@@ -0,0 +1,47 @@
+Binding for TI bq2415x Li-Ion Charger
+
+Required properties:
+- compatible: Should contain one of the following:
+ * "ti,bq24150"
+ * "ti,bq24150"
+ * "ti,bq24150a"
+ * "ti,bq24151"
+ * "ti,bq24151a"
+ * "ti,bq24152"
+ * "ti,bq24153"
+ * "ti,bq24153a"
+ * "ti,bq24155"
+ * "ti,bq24156"
+ * "ti,bq24156a"
+ * "ti,bq24158"
+- reg:			   integer, i2c address of the device.
+- ti,current-limit:	   integer, initial maximum current charger can pull
+			   from power supply in mA.
+- ti,weak-battery-voltage: integer, weak battery voltage threshold in mV.
+			   The chip will use slow precharge if battery voltage
+			   is below this value.
+- ti,battery-regulation-voltage: integer, maximum charging voltage in mV.
+- ti,charge-current:	   integer, maximum charging current in mA.
+- ti,termination-current:  integer, charge will be terminated when current in
+			   constant-voltage phase drops below this value (in mA).
+- ti,resistor-sense:	   integer, value of sensing resistor in milliohm.
+
+Optional properties:
+- ti,usb-charger-detection: phandle to usb charger detection device.
+			    (required for auto mode)
+
+Example from Nokia N900:
+
+bq24150a {
+	compatible = "ti,bq24150a";
+	reg = <0x6b>;
+
+	ti,current-limit = <100>;
+	ti,weak-battery-voltage = <3400>;
+	ti,battery-regulation-voltage = <4200>;
+	ti,charge-current = <650>;
+	ti,termination-current = <100>;
+	ti,resistor-sense = <68>;
+
+	ti,usb-charger-detection = <&isp1704>;
+};
diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt
index 07e04cdc0c9..4f8184d069c 100644
--- a/Documentation/devicetree/bindings/spi/spi_atmel.txt
+++ b/Documentation/devicetree/bindings/spi/spi_atmel.txt
@@ -5,6 +5,9 @@ Required properties:
 - reg: Address and length of the register set for the device
 - interrupts: Should contain spi interrupt
 - cs-gpios: chipselects
+- clock-names: tuple listing input clock names.
+	Required elements: "spi_clk"
+- clocks: phandles to input clocks.
 
 Example:
 
@@ -14,6 +17,8 @@ spi1: spi@fffcc000 {
 	interrupts = <13 4 5>;
 	#address-cells = <1>;
 	#size-cells = <0>;
+	clocks = <&spi1_clk>;
+	clock-names = "spi_clk";
 	cs-gpios = <&pioB 3 0>;
 	status = "okay";
 
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 3f900cd51bf..40ce2df0e0e 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -8,6 +8,7 @@ ad	Avionic Design GmbH
 adi	Analog Devices, Inc.
 aeroflexgaisler	Aeroflex Gaisler AB
 ak	Asahi Kasei Corp.
+allwinner	Allwinner Technology Co., Ltd.
 altr	Altera Corp.
 amcc	Applied Micro Circuits Corporation (APM, formally AMCC)
 amstaos	AMS-Taos Inc.
@@ -40,6 +41,7 @@ gmt	Global Mixed-mode Technology, Inc.
 gumstix	Gumstix, Inc.
 haoyu	Haoyu Microelectronic Co. Ltd.
 hisilicon	Hisilicon Limited.
+honeywell	Honeywell
 hp	Hewlett Packard
 ibm	International Business Machines (IBM)
 idt	Integrated Device Technologies, Inc.
@@ -55,6 +57,7 @@ maxim	Maxim Integrated Products
 microchip	Microchip Technology Inc.
 mosaixtech	Mosaix Technologies, Inc.
 national	National Semiconductor
+neonode		Neonode Inc.
 nintendo	Nintendo
 nvidia	NVIDIA
 nxp	NXP Semiconductors
@@ -64,7 +67,7 @@ phytec	PHYTEC Messtechnik GmbH
 picochip	Picochip Ltd
 powervr	PowerVR (deprecated, use img)
 qca	Qualcomm Atheros, Inc.
-qcom	Qualcomm, Inc.
+qcom	Qualcomm Technologies, Inc
 ralink	Mediatek/Ralink Technology Corp.
 ramtron	Ramtron International
 realtek Realtek Semiconductor Corp.
@@ -78,6 +81,7 @@ silabs	Silicon Laboratories
 simtek
 sirf	SiRF Technology, Inc.
 snps 	Synopsys, Inc.
+spansion	Spansion Inc.
 st	STMicroelectronics
 ste	ST-Ericsson
 stericsson	ST-Ericsson
diff --git a/Documentation/i2c/instantiating-devices b/Documentation/i2c/instantiating-devices
index c70e7a7638d..0d85ac1935b 100644
--- a/Documentation/i2c/instantiating-devices
+++ b/Documentation/i2c/instantiating-devices
@@ -8,8 +8,8 @@ reason, the kernel code must instantiate I2C devices explicitly. There are
 several ways to achieve this, depending on the context and requirements.
 
 
-Method 1: Declare the I2C devices by bus number
------------------------------------------------
+Method 1a: Declare the I2C devices by bus number
+------------------------------------------------
 
 This method is appropriate when the I2C bus is a system bus as is the case
 for many embedded systems. On such systems, each I2C bus has a number
@@ -51,6 +51,43 @@ The devices will be automatically unbound and destroyed when the I2C bus
 they sit on goes away (if ever.)
 
 
+Method 1b: Declare the I2C devices via devicetree
+-------------------------------------------------
+
+This method has the same implications as method 1a. The declaration of I2C
+devices is here done via devicetree as subnodes of the master controller.
+
+Example:
+
+	i2c1: i2c@400a0000 {
+		/* ... master properties skipped ... */
+		clock-frequency = <100000>;
+
+		flash@50 {
+			compatible = "atmel,24c256";
+			reg = <0x50>;
+		};
+
+		pca9532: gpio@60 {
+			compatible = "nxp,pca9532";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x60>;
+		};
+	};
+
+Here, two devices are attached to the bus using a speed of 100kHz. For
+additional properties which might be needed to set up the device, please refer
+to its devicetree documentation in Documentation/devicetree/bindings/.
+
+
+Method 1c: Declare the I2C devices via ACPI
+-------------------------------------------
+
+ACPI can also describe I2C devices. There is special documentation for this
+which is currently located at Documentation/acpi/enumeration.txt.
+
+
 Method 2: Instantiate the devices explicitly
 --------------------------------------------
 
diff --git a/Documentation/networking/3c505.txt b/Documentation/networking/3c505.txt
deleted file mode 100644
index 72f38b13101..00000000000
--- a/Documentation/networking/3c505.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-The 3Com Etherlink Plus (3c505) driver.
-
-This driver now uses DMA.  There is currently no support for PIO operation.
-The default DMA channel is 6; this is _not_ autoprobed, so you must
-make sure you configure it correctly.  If loading the driver as a
-module, you can do this with "modprobe 3c505 dma=n".  If the driver is
-linked statically into the kernel, you must either use an "ether="
-statement on the command line, or change the definition of ELP_DMA in 3c505.h.
-
-The driver will warn you if it has to fall back on the compiled in
-default DMA channel. 
-
-If no base address is given at boot time, the driver will autoprobe
-ports 0x300, 0x280 and 0x310 (in that order).  If no IRQ is given, the driver
-will try to probe for it.
-
-The driver can be used as a loadable module.
-
-Theoretically, one instance of the driver can now run multiple cards,
-in the standard way (when loading a module, say "modprobe 3c505
-io=0x300,0x340 irq=10,11 dma=6,7" or whatever).  I have not tested
-this, though.
-
-The driver may now support revision 2 hardware; the dependency on
-being able to read the host control register has been removed.  This
-is also untested, since I don't have a suitable card.
-
-Known problems:
- I still see "DMA upload timed out" messages from time to time.  These
-seem to be fairly non-fatal though.
- The card is old and slow.
-
-To do:
- Improve probe/setup code
- Test multicast and promiscuous operation
-
-Authors:
- The driver is mainly written by Craig Southeren, email
- <craigs@ineluki.apana.org.au>.
- Parts of the driver (adapting the driver to 1.1.4+ kernels,
- IRQ/address detection, some changes) and this README by
- Juha Laiho <jlaiho@ichaos.nullnet.fi>.
- DMA mode, more fixes, etc, by Philip Blundell <pjb27@cam.ac.uk>
- Multicard support, Software configurable DMA, etc., by
- Christopher Collins <ccollins@pcug.org.au>
diff --git a/Documentation/phy.txt b/Documentation/phy.txt
index 0103e4b15b0..ebff6ee5244 100644
--- a/Documentation/phy.txt
+++ b/Documentation/phy.txt
@@ -75,14 +75,26 @@ Before the controller can make use of the PHY, it has to get a reference to
 it. This framework provides the following APIs to get a reference to the PHY.
 
 struct phy *phy_get(struct device *dev, const char *string);
+struct phy *phy_optional_get(struct device *dev, const char *string);
 struct phy *devm_phy_get(struct device *dev, const char *string);
-
-phy_get and devm_phy_get can be used to get the PHY. In the case of dt boot,
-the string arguments should contain the phy name as given in the dt data and
-in the case of non-dt boot, it should contain the label of the PHY.
-The only difference between the two APIs is that devm_phy_get associates the
-device with the PHY using devres on successful PHY get. On driver detach,
-release function is invoked on the the devres data and devres data is freed.
+struct phy *devm_phy_optional_get(struct device *dev, const char *string);
+
+phy_get, phy_optional_get, devm_phy_get and devm_phy_optional_get can
+be used to get the PHY. In the case of dt boot, the string arguments
+should contain the phy name as given in the dt data and in the case of
+non-dt boot, it should contain the label of the PHY.  The two
+devm_phy_get associates the device with the PHY using devres on
+successful PHY get. On driver detach, release function is invoked on
+the the devres data and devres data is freed. phy_optional_get and
+devm_phy_optional_get should be used when the phy is optional. These
+two functions will never return -ENODEV, but instead returns NULL when
+the phy cannot be found.
+
+It should be noted that NULL is a valid phy reference. All phy
+consumer calls on the NULL phy become NOPs. That is the release calls,
+the phy_init() and phy_exit() calls, and phy_power_on() and
+phy_power_off() calls are all NOP when applied to a NULL phy. The NULL
+phy is useful in devices for handling optional phy devices.
 
 5. Releasing a reference to the PHY
 
diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
index f72e0d1e0da..7982bcc4d15 100644
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@@ -543,7 +543,22 @@ SPI MASTER METHODS
 	queuing transfers that arrive in the meantime. When the driver is
 	finished with this message, it must call
 	spi_finalize_current_message() so the subsystem can issue the next
-	transfer. This may sleep.
+	message. This may sleep.
+
+    master->transfer_one(struct spi_master *master, struct spi_device *spi,
+			 struct spi_transfer *transfer)
+	The subsystem calls the driver to transfer a single transfer while
+	queuing transfers that arrive in the meantime. When the driver is
+	finished with this transfer, it must call
+	spi_finalize_current_transfer() so the subsystem can issue the next
+	transfer. This may sleep. Note: transfer_one and transfer_one_message
+	are mutually exclusive; when both are set, the generic subsystem does
+	not call your transfer_one callback.
+
+	Return values:
+	negative errno: error
+	0: transfer is finished
+	1: transfer is still in progress
 
     DEPRECATED METHODS
 
diff --git a/Documentation/zh_CN/arm64/booting.txt b/Documentation/zh_CN/arm64/booting.txt
index 28fa325b746..6f6d956ac1c 100644
--- a/Documentation/zh_CN/arm64/booting.txt
+++ b/Documentation/zh_CN/arm64/booting.txt
@@ -7,7 +7,7 @@ help.  Contact the Chinese maintainer if this translation is outdated
 or if there is a problem with the translation.
 
 Maintainer: Will Deacon <will.deacon@arm.com>
-Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
 ---------------------------------------------------------------------
 Documentation/arm64/booting.txt 的中文翻译
 
@@ -16,9 +16,9 @@ Documentation/arm64/booting.txt 的中文翻译
 译存在问题，请联系中文版维护者。
 
 英文版维护者： Will Deacon <will.deacon@arm.com>
-中文版维护者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
-中文版翻译者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
-中文版校译者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
+中文版维护者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版翻译者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版校译者： 傅炜  Fu Wei <wefu@redhat.com>
 
 以下为正文
 ---------------------------------------------------------------------
@@ -64,8 +64,8 @@ RAM，或可能使用对这个设备已知的 RAM 信息，还可能使用任何
 
 必要性: 强制
 
-设备树数据块（dtb）大小必须不大于 2 MB，且位于从内核映像起始算起第一个
-512MB 内的 2MB 边界上。这使得内核可以通过初始页表中的单个节描述符来
+设备树数据块（dtb）必须 8 字节对齐，并位于从内核映像起始算起第一个 512MB
+内，且不得跨越 2MB 对齐边界。这使得内核可以通过初始页表中的单个节描述符来
 映射此数据块。
 
 
@@ -84,13 +84,23 @@ AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内
 
 必要性: 强制
 
-已解压的内核映像包含一个 32 字节的头，内容如下：
+已解压的内核映像包含一个 64 字节的头，内容如下：
 
-  u32 magic	= 0x14000008;	/* 跳转到 stext, 小端 */
-  u32 res0	= 0;		/* 保留 */
+  u32 code0;			/* 可执行代码 */
+  u32 code1;			/* 可执行代码 */
   u64 text_offset;		/* 映像装载偏移 */
+  u64 res0	= 0;		/* 保留 */
   u64 res1	= 0;		/* 保留 */
   u64 res2	= 0;		/* 保留 */
+  u64 res3	= 0;		/* 保留 */
+  u64 res4	= 0;		/* 保留 */
+  u32 magic	= 0x644d5241;	/* 魔数, 小端, "ARM\x64" */
+  u32 res5 = 0;      		/* 保留 */
+
+
+映像头注释：
+
+- code0/code1 负责跳转到 stext.
 
 映像必须位于系统 RAM 起始处的特定偏移（当前是 0x80000）。系统 RAM
 的起始地址必须是以 2MB 对齐的。
@@ -118,9 +128,9 @@ AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内
   外部高速缓存（如果存在）必须配置并禁用。
 
 - 架构计时器
-  CNTFRQ 必须设定为计时器的频率。
-  如果在 EL1 模式下进入内核，则 CNTHCTL_EL2 中的 EL1PCTEN (bit 0)
-  必须置位。
+  CNTFRQ 必须设定为计时器的频率，且 CNTVOFF 必须设定为对所有 CPU
+  都一致的值。如果在 EL1 模式下进入内核，则 CNTHCTL_EL2 中的
+  EL1PCTEN (bit 0) 必须置位。
 
 - 一致性
   通过内核启动的所有 CPU 在内核入口地址上必须处于相同的一致性域中。
@@ -131,23 +141,40 @@ AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内
   在进入内核映像的异常级中，所有构架中可写的系统寄存器必须通过软件
   在一个更高的异常级别下初始化，以防止在 未知 状态下运行。
 
+以上对于 CPU 模式、高速缓存、MMU、架构计时器、一致性、系统寄存器的
+必要条件描述适用于所有 CPU。所有 CPU 必须在同一异常级别跳入内核。
+
 引导装载程序必须在每个 CPU 处于以下状态时跳入内核入口：
 
 - 主 CPU 必须直接跳入内核映像的第一条指令。通过此 CPU 传递的设备树
-  数据块必须在每个 CPU 节点中包含以下内容：
-
-    1、‘enable-method’属性。目前，此字段支持的值仅为字符串“spin-table”。
-
-    2、‘cpu-release-addr’标识一个 64-bit、初始化为零的内存位置。
+  数据块必须在每个 CPU 节点中包含一个 ‘enable-method’ 属性，所
+  支持的 enable-method 请见下文。
 
   引导装载程序必须生成这些设备树属性，并在跳入内核入口之前将其插入
   数据块。
 
-- 任何辅助 CPU 必须在内存保留区（通过设备树中的 /memreserve/ 域传递
+- enable-method 为 “spin-table” 的 CPU 必须在它们的 CPU
+  节点中包含一个 ‘cpu-release-addr’ 属性。这个属性标识了一个
+  64 位自然对齐且初始化为零的内存位置。
+
+  这些 CPU 必须在内存保留区（通过设备树中的 /memreserve/ 域传递
   给内核）中自旋于内核之外，轮询它们的 cpu-release-addr 位置（必须
   包含在保留区中）。可通过插入 wfe 指令来降低忙循环开销，而主 CPU 将
   发出 sev 指令。当对 cpu-release-addr 所指位置的读取操作返回非零值
-  时，CPU 必须直接跳入此值所指向的地址。
+  时，CPU 必须跳入此值所指向的地址。此值为一个单独的 64 位小端值，
+  因此 CPU 须在跳转前将所读取的值转换为其本身的端模式。
+
+- enable-method 为 “psci” 的 CPU 保持在内核外（比如，在
+  memory 节点中描述为内核空间的内存区外，或在通过设备树 /memreserve/
+  域中描述为内核保留区的空间中）。内核将会发起在 ARM 文档（编号
+  ARM DEN 0022A：用于 ARM 上的电源状态协调接口系统软件）中描述的
+  CPU_ON 调用来将 CPU 带入内核。
+
+  *译者注:到文档翻译时，此文档已更新为 ARM DEN 0022B。
+
+  设备树必须包含一个 ‘psci’ 节点，请参考以下文档：
+  Documentation/devicetree/bindings/arm/psci.txt
+
 
 - 辅助 CPU 通用寄存器设置
   x0 = 0 (保留，将来可能使用)
diff --git a/Documentation/zh_CN/arm64/memory.txt b/Documentation/zh_CN/arm64/memory.txt
index a5f6283829f..a782704c1cb 100644
--- a/Documentation/zh_CN/arm64/memory.txt
+++ b/Documentation/zh_CN/arm64/memory.txt
@@ -7,7 +7,7 @@ help.  Contact the Chinese maintainer if this translation is outdated
 or if there is a problem with the translation.
 
 Maintainer: Catalin Marinas <catalin.marinas@arm.com>
-Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
 ---------------------------------------------------------------------
 Documentation/arm64/memory.txt 的中文翻译
 
@@ -16,9 +16,9 @@ Documentation/arm64/memory.txt 的中文翻译
 译存在问题，请联系中文版维护者。
 
 英文版维护者： Catalin Marinas <catalin.marinas@arm.com>
-中文版维护者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
-中文版翻译者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
-中文版校译者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
+中文版维护者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版翻译者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版校译者： 傅炜  Fu Wei <wefu@redhat.com>
 
 以下为正文
 ---------------------------------------------------------------------
@@ -41,7 +41,7 @@ AArch64 Linux 使用页大小为 4KB 的 3 级转换表配置，对于用户和�
 TTBR1 中，且从不写入 TTBR0。
 
 
-AArch64 Linux 内存布局：
+AArch64 Linux 在页大小为 4KB 时的内存布局：
 
 起始地址			结束地址			大小		用途
 -----------------------------------------------------------------------
@@ -55,15 +55,42 @@ ffffffbc00000000	ffffffbdffffffff	   8GB		vmemmap
 
 ffffffbe00000000	ffffffbffbbfffff	  ~8GB		[防护页，未来用于 vmmemap]
 
+ffffffbffbc00000	ffffffbffbdfffff	   2MB		earlyprintk 设备
+
 ffffffbffbe00000	ffffffbffbe0ffff	  64KB		PCI I/O 空间
 
-ffffffbbffff0000	ffffffbcffffffff	  ~2MB		[防护页]
+ffffffbffbe10000	ffffffbcffffffff	  ~2MB		[防护页]
 
 ffffffbffc000000	ffffffbfffffffff	  64MB		模块
 
 ffffffc000000000	ffffffffffffffff	 256GB		内核逻辑内存映射
 
 
+AArch64 Linux 在页大小为 64KB 时的内存布局：
+
+起始地址			结束地址			大小		用途
+-----------------------------------------------------------------------
+0000000000000000	000003ffffffffff	   4TB		用户空间
+
+fffffc0000000000	fffffdfbfffeffff	  ~2TB		vmalloc
+
+fffffdfbffff0000	fffffdfbffffffff	  64KB		[防护页]
+
+fffffdfc00000000	fffffdfdffffffff	   8GB		vmemmap
+
+fffffdfe00000000	fffffdfffbbfffff	  ~8GB		[防护页，未来用于 vmmemap]
+
+fffffdfffbc00000	fffffdfffbdfffff	   2MB		earlyprintk 设备
+
+fffffdfffbe00000	fffffdfffbe0ffff	  64KB		PCI I/O 空间
+
+fffffdfffbe10000	fffffdfffbffffff	  ~2MB		[防护页]
+
+fffffdfffc000000	fffffdffffffffff	  64MB		模块
+
+fffffe0000000000	ffffffffffffffff	   2TB		内核逻辑内存映射
+
+
 4KB 页大小的转换表查找：
 
 +--------+--------+--------+--------+--------+--------+--------+--------+
@@ -91,3 +118,10 @@ ffffffc000000000	ffffffffffffffff	 256GB		内核逻辑内存映射
  |                 |    +--------------------------> [41:29] L2 索引 (仅使用 38:29 )
  |                 +-------------------------------> [47:42] L1 索引 (未使用)
  +-------------------------------------------------> [63] TTBR0/1
+
+当使用 KVM 时, 管理程序（hypervisor）在 EL2 中通过相对内核虚拟地址的
+一个固定偏移来映射内核页（内核虚拟地址的高 24 位设为零）:
+
+起始地址			结束地址			大小		用途
+-----------------------------------------------------------------------
+0000004000000000	0000007fffffffff	 256GB		在 HYP 中映射的内核对象
diff --git a/Documentation/zh_CN/arm64/tagged-pointers.txt b/Documentation/zh_CN/arm64/tagged-pointers.txt
new file mode 100644
index 00000000000..2664d1bd5a1
--- /dev/null
+++ b/Documentation/zh_CN/arm64/tagged-pointers.txt
@@ -0,0 +1,52 @@
+Chinese translated version of Documentation/arm64/tagged-pointers.txt
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Will Deacon <will.deacon@arm.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
+---------------------------------------------------------------------
+Documentation/arm64/tagged-pointers.txt 的中文翻译
+
+如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
+交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题，请联系中文版维护者。
+
+英文版维护者： Will Deacon <will.deacon@arm.com>
+中文版维护者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版翻译者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版校译者： 傅炜  Fu Wei <wefu@redhat.com>
+
+以下为正文
+---------------------------------------------------------------------
+		Linux 在 AArch64 中带标记的虚拟地址
+		=================================
+
+作者: Will Deacon <will.deacon@arm.com>
+日期: 2013 年 06 月 12 日
+
+本文档简述了在 AArch64 地址转换系统中提供的带标记的虚拟地址及其在
+AArch64 Linux 中的潜在用途。
+
+内核提供的地址转换表配置使通过 TTBR0 完成的虚拟地址转换（即用户空间
+映射），其虚拟地址的最高 8 位（63:56）会被转换硬件所忽略。这种机制
+让这些位可供应用程序自由使用，其注意事项如下：
+
+	(1) 内核要求所有传递到 EL1 的用户空间地址带有 0x00 标记。
+	    这意味着任何携带用户空间虚拟地址的系统调用（syscall）
+	    参数 *必须* 在陷入内核前使它们的最高字节被清零。
+
+	(2) 非零标记在传递信号时不被保存。这意味着在应用程序中利用了
+	    标记的信号处理函数无法依赖 siginfo_t 的用户空间虚拟
+	    地址所携带的包含其内部域信息的标记。此规则的一个例外是
+	    当信号是在调试观察点的异常处理程序中产生的，此时标记的
+	    信息将被保存。
+
+	(3) 当使用带标记的指针时需特别留心，因为仅对两个虚拟地址
+	    的高字节，C 编译器很可能无法判断它们是不同的。
+
+此构架会阻止对带标记的 PC 指针的利用，因此在异常返回时，其高字节
+将被设置成一个为 “55” 的扩展符。