Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
 "Updates for the input subsystem.  You will get an new drivers for
  Hyper-V synthetic keyboard and for Neonode zForce touchscreens, plus a
  bunch of driver fixes and cleanups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (49 commits)
  Revert "Input: ALPS - add support for model found on Dell XT2"
  arm: dts: am335x sk: add touchscreen support
  Input: ti_am335x_tsc - fix spelling mistake in TSC/ADC DT binding
  Input: cyttsp4 - replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
  Input: mma8450 - add missing i2c_set_clientdata() in mma8450_probe()
  Input: mpu3050 - add missing i2c_set_clientdata() in mpu3050_probe()
  Input: tnetv107x-keypad - make irqs signed for error handling
  Input: add driver for Neonode zForce based touchscreens
  Input: sh_keysc - enable the driver on all ARM platforms
  Input: remove a redundant max() call
  Input: mousedev - allow disabling even without CONFIG_EXPERT
  Input: allow deselecting serio drivers even without CONFIG_EXPERT
  Input: i8042 - add PNP modaliases
  Input: evdev - fall back to vmalloc for client event buffer
  Input: cypress_ps2 - do not consider data bad if palm is detected
  Input: cypress_ps2 - remove useless cast
  Input: fix PWM-related undefined reference errors
  Input: ALPS - change secondary device's name
  Input: wacom - not all multi-interface devices support touch
  Input: nspire-keypad - add missing clk_disable_unprepare() on error path
  ...

2 files changed, 4 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
index 491c97b7838..878549ba814 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
@@ -6,7 +6,7 @@ Required properties:
 	ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen
 		  support on the platform.
 	ti,x-plate-resistance: X plate resistance
-	ti,coordiante-readouts: The sequencer supports a total of 16
+	ti,coordinate-readouts: The sequencer supports a total of 16
 				programmable steps each step is used to
 				read a single coordinate. A single
                                 readout is enough but multiple reads can
diff --git a/Documentation/input/gamepad.txt b/Documentation/input/gamepad.txt
index 8002c894c6b..31bb6a4029e 100644
--- a/Documentation/input/gamepad.txt
+++ b/Documentation/input/gamepad.txt
@@ -122,12 +122,14 @@ D-Pad:
       BTN_DPAD_*
     Analog buttons are reported as:
       ABS_HAT0X and ABS_HAT0Y
+      (for ABS values negative is left/up, positive is right/down)
 
 Analog-Sticks:
   The left analog-stick is reported as ABS_X, ABS_Y. The right analog stick is
   reported as ABS_RX, ABS_RY. Zero, one or two sticks may be present.
   If analog-sticks provide digital buttons, they are mapped accordingly as
   BTN_THUMBL (first/left) and BTN_THUMBR (second/right).
+    (for ABS values negative is left/up, positive is right/down)
 
 Triggers:
   Trigger buttons can be available as digital or analog buttons or both. User-
@@ -138,6 +140,7 @@ Triggers:
   ABS_HAT2X (right/ZR) and BTN_TL2 or ABS_HAT2Y (left/ZL).
   If only one trigger-button combination is present (upper+lower), they are
   reported as "right" triggers (BTN_TR/ABS_HAT1X).
+    (ABS trigger values start at 0, pressure is reported as positive values)
 
 Menu-Pad:
   Menu buttons are always digital and are mapped according to their location