Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	drivers/net/usb/r8152.c
	drivers/net/xen-netback/netback.c

Both the r8152 and netback conflicts were simple overlapping
changes.

Signed-off-by: David S. Miller <davem@davemloft.net>

5 files changed, 73 insertions, 34 deletions

diff --git a/Documentation/device-mapper/cache.txt b/Documentation/device-mapper/cache.txt
index e6b72d35515..68c0f517c60 100644
--- a/Documentation/device-mapper/cache.txt
+++ b/Documentation/device-mapper/cache.txt
@@ -124,12 +124,11 @@ the default being 204800 sectors (or 100MB).
 Updating on-disk metadata
 -------------------------
 
-On-disk metadata is committed every time a REQ_SYNC or REQ_FUA bio is
-written.  If no such requests are made then commits will occur every
-second.  This means the cache behaves like a physical disk that has a
-write cache (the same is true of the thin-provisioning target).  If
-power is lost you may lose some recent writes.  The metadata should
-always be consistent in spite of any crash.
+On-disk metadata is committed every time a FLUSH or FUA bio is written.
+If no such requests are made then commits will occur every second.  This
+means the cache behaves like a physical disk that has a volatile write
+cache.  If power is lost you may lose some recent writes.  The metadata
+should always be consistent in spite of any crash.
 
 The 'dirty' state for a cache block changes far too frequently for us
 to keep updating it on the fly.  So we treat it as a hint.  In normal
diff --git a/Documentation/device-mapper/thin-provisioning.txt b/Documentation/device-mapper/thin-provisioning.txt
index 8a7a3d46e0d..05a27e9442b 100644
--- a/Documentation/device-mapper/thin-provisioning.txt
+++ b/Documentation/device-mapper/thin-provisioning.txt
@@ -116,6 +116,35 @@ Resuming a device with a new table itself triggers an event so the
 userspace daemon can use this to detect a situation where a new table
 already exceeds the threshold.
 
+A low water mark for the metadata device is maintained in the kernel and
+will trigger a dm event if free space on the metadata device drops below
+it.
+
+Updating on-disk metadata
+-------------------------
+
+On-disk metadata is committed every time a FLUSH or FUA bio is written.
+If no such requests are made then commits will occur every second.  This
+means the thin-provisioning target behaves like a physical disk that has
+a volatile write cache.  If power is lost you may lose some recent
+writes.  The metadata should always be consistent in spite of any crash.
+
+If data space is exhausted the pool will either error or queue IO
+according to the configuration (see: error_if_no_space).  If metadata
+space is exhausted or a metadata operation fails: the pool will error IO
+until the pool is taken offline and repair is performed to 1) fix any
+potential inconsistencies and 2) clear the flag that imposes repair.
+Once the pool's metadata device is repaired it may be resized, which
+will allow the pool to return to normal operation.  Note that if a pool
+is flagged as needing repair, the pool's data and metadata devices
+cannot be resized until repair is performed.  It should also be noted
+that when the pool's metadata space is exhausted the current metadata
+transaction is aborted.  Given that the pool will cache IO whose
+completion may have already been acknowledged to upper IO layers
+(e.g. filesystem) it is strongly suggested that consistency checks
+(e.g. fsck) be performed on those layers when repair of the pool is
+required.
+
 Thin provisioning
 -----------------
 
@@ -258,10 +287,9 @@ ii) Status
 	should register for the event and then check the target's status.
 
     held metadata root:
-	The location, in sectors, of the metadata root that has been
+	The location, in blocks, of the metadata root that has been
 	'held' for userspace read access.  '-' indicates there is no
-	held root.  This feature is not yet implemented so '-' is
-	always returned.
+	held root.
 
     discard_passdown|no_discard_passdown
 	Whether or not discards are actually being passed down to the
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,capri-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt
index 9e9e9ef9f85..c119debe6ba 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,capri-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt
@@ -1,4 +1,4 @@
-Broadcom Capri Pin Controller
+Broadcom BCM281xx Pin Controller
 
 This is a pin controller for the Broadcom BCM281xx SoC family, which includes
 BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs.
@@ -7,14 +7,14 @@ BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs.
 
 Required Properties:
 
-- compatible:	Must be "brcm,capri-pinctrl".
+- compatible:	Must be "brcm,bcm11351-pinctrl"
 - reg:		Base address of the PAD Controller register block and the size
 		of the block.
 
 For example, the following is the bare minimum node:
 
 	pinctrl@35004800 {
-		compatible = "brcm,capri-pinctrl";
+		compatible = "brcm,bcm11351-pinctrl";
 		reg = <0x35004800 0x430>;
 	};
 
@@ -119,7 +119,7 @@ Optional Properties (for HDMI pins):
 Example:
 // pin controller node
 pinctrl@35004800 {
-	compatible = "brcm,capri-pinctrl";
+	compatible = "brcmbcm11351-pinctrl";
 	reg = <0x35004800 0x430>;
 
 	// pin configuration node
diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt
index 1404674c0a0..6fea79efb4c 100644
--- a/Documentation/networking/packet_mmap.txt
+++ b/Documentation/networking/packet_mmap.txt
@@ -453,7 +453,7 @@ TP_STATUS_COPY        : This flag indicates that the frame (and associated
                         enabled previously with setsockopt() and 
                         the PACKET_COPY_THRESH option. 
 
-                        The number of frames than can be buffered to 
+                        The number of frames that can be buffered to
                         be read with recvfrom is limited like a normal socket.
                         See the SO_RCVBUF option in the socket (7) man page.
 
diff --git a/Documentation/networking/timestamping.txt b/Documentation/networking/timestamping.txt
index 661d3c316a1..048c92b487f 100644
--- a/Documentation/networking/timestamping.txt
+++ b/Documentation/networking/timestamping.txt
@@ -21,26 +21,38 @@ has such a feature).
 
 SO_TIMESTAMPING:
 
-Instructs the socket layer which kind of information is wanted. The
-parameter is an integer with some of the following bits set. Setting
-other bits is an error and doesn't change the current state.
-
-SOF_TIMESTAMPING_TX_HARDWARE:  try to obtain send time stamp in hardware
-SOF_TIMESTAMPING_TX_SOFTWARE:  if SOF_TIMESTAMPING_TX_HARDWARE is off or
-                               fails, then do it in software
-SOF_TIMESTAMPING_RX_HARDWARE:  return the original, unmodified time stamp
-                               as generated by the hardware
-SOF_TIMESTAMPING_RX_SOFTWARE:  if SOF_TIMESTAMPING_RX_HARDWARE is off or
-                               fails, then do it in software
-SOF_TIMESTAMPING_RAW_HARDWARE: return original raw hardware time stamp
-SOF_TIMESTAMPING_SYS_HARDWARE: return hardware time stamp transformed to
-                               the system time base
-SOF_TIMESTAMPING_SOFTWARE:     return system time stamp generated in
-                               software
-
-SOF_TIMESTAMPING_TX/RX determine how time stamps are generated.
-SOF_TIMESTAMPING_RAW/SYS determine how they are reported in the
-following control message:
+Instructs the socket layer which kind of information should be collected
+and/or reported.  The parameter is an integer with some of the following
+bits set. Setting other bits is an error and doesn't change the current
+state.
+
+Four of the bits are requests to the stack to try to generate
+timestamps.  Any combination of them is valid.
+
+SOF_TIMESTAMPING_TX_HARDWARE:  try to obtain send time stamps in hardware
+SOF_TIMESTAMPING_TX_SOFTWARE:  try to obtain send time stamps in software
+SOF_TIMESTAMPING_RX_HARDWARE:  try to obtain receive time stamps in hardware
+SOF_TIMESTAMPING_RX_SOFTWARE:  try to obtain receive time stamps in software
+
+The other three bits control which timestamps will be reported in a
+generated control message.  If none of these bits are set or if none of
+the set bits correspond to data that is available, then the control
+message will not be generated:
+
+SOF_TIMESTAMPING_SOFTWARE:     report systime if available
+SOF_TIMESTAMPING_SYS_HARDWARE: report hwtimetrans if available
+SOF_TIMESTAMPING_RAW_HARDWARE: report hwtimeraw if available
+
+It is worth noting that timestamps may be collected for reasons other
+than being requested by a particular socket with
+SOF_TIMESTAMPING_[TR]X_(HARD|SOFT)WARE.  For example, most drivers that
+can generate hardware receive timestamps ignore
+SOF_TIMESTAMPING_RX_HARDWARE.  It is still a good idea to set that flag
+in case future drivers pay attention.
+
+If timestamps are reported, they will appear in a control message with
+cmsg_level==SOL_SOCKET, cmsg_type==SO_TIMESTAMPING, and a payload like
+this:
 
 struct scm_timestamping {
 	struct timespec systime;