Merge branch 'msm-next' of git://people.freedesktop.org/~robclark/linux into drm-next

This time around we have a mix of new hw enablement (mdp5 v1.3 /
apq8084), plus devicetree and various upstream changes (mostly
adapting to CCF vs downstream clk driver differences) for mdp4 /
apq8064.  With these drm/msm patches plus a few other small patchsets
(from linaro qcom integration branch.. mostly stuff queued up for
3.17) we have the inforce ifc6410 board working, with gpu.  Much nicer
to work with than ancient vendor android branch :-)

* 'msm-next' of git://people.freedesktop.org/~robclark/linux:
  drm/msm/hdmi: fix HDMI_MUX_EN gpio request typo
  drm/msm/hdmi: enable lpm-mux if it is present
  drm/msm/mdp5: add support for MDP5 v1.3
  drm/msm: fix potential deadlock in gpu init
  drm/msm: use upstream iommu
  drm/msm: no mmu is only error if not using vram carveout
  drm/msm: fix BUG_ON() in error cleanup path
  drm/msm/mdp4: add mdp axi clk
  drm/msm: hdmi phy 8960 phy pll
  drm/msm: update generated headers
  drm/msm: DT support for 8960/8064 (v3)
  drm/msm: Implement msm drm fb_mmap callback function
  drm/msm: activate iommu support
  drm/msm: fix double struct_mutex acquire

3 files changed, 146 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/drm/msm/gpu.txt b/Documentation/devicetree/bindings/drm/msm/gpu.txt
new file mode 100644
index 00000000000..67d0a58dbb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/msm/gpu.txt
@@ -0,0 +1,52 @@
+Qualcomm adreno/snapdragon GPU
+
+Required properties:
+- compatible: "qcom,adreno-3xx"
+- reg: Physical base address and length of the controller's registers.
+- interrupts: The interrupt signal from the gpu.
+- clocks: device clocks
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required:
+  * "core_clk"
+  * "iface_clk"
+  * "mem_iface_clk"
+- qcom,chipid: gpu chip-id.  Note this may become optional for future
+  devices if we can reliably read the chipid from hw
+- qcom,gpu-pwrlevels: list of operating points
+  - compatible: "qcom,gpu-pwrlevels"
+  - for each qcom,gpu-pwrlevel:
+    - qcom,gpu-freq: requested gpu clock speed
+    - NOTE: downstream android driver defines additional parameters to
+      configure memory bandwidth scaling per OPP.
+
+Example:
+
+/ {
+	...
+
+	gpu: qcom,kgsl-3d0@4300000 {
+		compatible = "qcom,adreno-3xx";
+		reg = <0x04300000 0x20000>;
+		reg-names = "kgsl_3d0_reg_memory";
+		interrupts = <GIC_SPI 80 0>;
+		interrupt-names = "kgsl_3d0_irq";
+		clock-names =
+		    "core_clk",
+		    "iface_clk",
+		    "mem_iface_clk";
+		clocks =
+		    <&mmcc GFX3D_CLK>,
+		    <&mmcc GFX3D_AHB_CLK>,
+		    <&mmcc MMSS_IMEM_AHB_CLK>;
+		qcom,chipid = <0x03020100>;
+		qcom,gpu-pwrlevels {
+			compatible = "qcom,gpu-pwrlevels";
+			qcom,gpu-pwrlevel@0 {
+				qcom,gpu-freq = <450000000>;
+			};
+			qcom,gpu-pwrlevel@1 {
+				qcom,gpu-freq = <27000000>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/drm/msm/hdmi.txt b/Documentation/devicetree/bindings/drm/msm/hdmi.txt
new file mode 100644
index 00000000000..aca917fe2ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/msm/hdmi.txt
@@ -0,0 +1,46 @@
+Qualcomm adreno/snapdragon hdmi output
+
+Required properties:
+- compatible: one of the following
+   * "qcom,hdmi-tx-8660"
+   * "qcom,hdmi-tx-8960"
+- reg: Physical base address and length of the controller's registers
+- reg-names: "core_physical"
+- interrupts: The interrupt signal from the hdmi block.
+- clocks: device clocks
+  See ../clocks/clock-bindings.txt for details.
+- qcom,hdmi-tx-ddc-clk-gpio: ddc clk pin
+- qcom,hdmi-tx-ddc-data-gpio: ddc data pin
+- qcom,hdmi-tx-hpd-gpio: hpd pin
+- core-vdda-supply: phandle to supply regulator
+- hdmi-mux-supply: phandle to mux regulator
+
+Optional properties:
+- qcom,hdmi-tx-mux-en-gpio: hdmi mux enable pin
+- qcom,hdmi-tx-mux-sel-gpio: hdmi mux select pin
+
+Example:
+
+/ {
+	...
+
+	hdmi: qcom,hdmi-tx-8960@4a00000 {
+		compatible = "qcom,hdmi-tx-8960";
+		reg-names = "core_physical";
+		reg = <0x04a00000 0x1000>;
+		interrupts = <GIC_SPI 79 0>;
+		clock-names =
+		    "core_clk",
+		    "master_iface_clk",
+		    "slave_iface_clk";
+		clocks =
+		    <&mmcc HDMI_APP_CLK>,
+		    <&mmcc HDMI_M_AHB_CLK>,
+		    <&mmcc HDMI_S_AHB_CLK>;
+		qcom,hdmi-tx-ddc-clk = <&msmgpio 70 GPIO_ACTIVE_HIGH>;
+		qcom,hdmi-tx-ddc-data = <&msmgpio 71 GPIO_ACTIVE_HIGH>;
+		qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
+		core-vdda-supply = <&pm8921_hdmi_mvs>;
+		hdmi-mux-supply = <&ext_3p3v>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/drm/msm/mdp.txt b/Documentation/devicetree/bindings/drm/msm/mdp.txt
new file mode 100644
index 00000000000..1a0598e5279
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/msm/mdp.txt
@@ -0,0 +1,48 @@
+Qualcomm adreno/snapdragon display controller
+
+Required properties:
+- compatible:
+  * "qcom,mdp" - mdp4
+- reg: Physical base address and length of the controller's registers.
+- interrupts: The interrupt signal from the display controller.
+- connectors: array of phandles for output device(s)
+- clocks: device clocks
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required:
+  * "core_clk"
+  * "iface_clk"
+  * "lut_clk"
+  * "src_clk"
+  * "hdmi_clk"
+  * "mpd_clk"
+
+Optional properties:
+- gpus: phandle for gpu device
+
+Example:
+
+/ {
+	...
+
+	mdp: qcom,mdp@5100000 {
+		compatible = "qcom,mdp";
+		reg = <0x05100000 0xf0000>;
+		interrupts = <GIC_SPI 75 0>;
+		connectors = <&hdmi>;
+		gpus = <&gpu>;
+		clock-names =
+		    "core_clk",
+		    "iface_clk",
+		    "lut_clk",
+		    "src_clk",
+		    "hdmi_clk",
+		    "mdp_clk";
+		clocks =
+		    <&mmcc MDP_SRC>,
+		    <&mmcc MDP_AHB_CLK>,
+		    <&mmcc MDP_LUT_CLK>,
+		    <&mmcc TV_SRC>,
+		    <&mmcc HDMI_TV_CLK>,
+		    <&mmcc MDP_TV_CLK>;
+	};
+};