summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-03-21 10:27:19 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-03-21 10:27:19 -0700
commitc207f3a43194e108dda43dc9a1ce507335cff6b9 (patch)
tree55880f8301e8546b1908f69947d0d41aaa044814 /Documentation
parentc7c66c0cb0c77b1a8edf09bca57d922312d58030 (diff)
parente7cc3aca0f6a36b018934264ee20bee45dc13e29 (diff)
Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6
Pull irq_domain support for all architectures from Grant Likely: "Generialize powerpc's irq_host as irq_domain This branch takes the PowerPC irq_host infrastructure (reverse mapping from Linux IRQ numbers to hardware irq numbering), generalizes it, renames it to irq_domain, and makes it available to all architectures. Originally the plan has been to create an all-new irq_domain implementation which addresses some of the powerpc shortcomings such as not handling 1:1 mappings well, but doing that proved to be far more difficult and invasive than generalizing the working code and refactoring it in-place. So, this branch rips out the 'new' irq_domain and replaces it with the modified powerpc version (in a fully bisectable way of course). It converts all users over to the new API and makes irq_domain selectable on any architecture. No architecture is forced to enable irq_domain, but the infrastructure is required for doing OpenFirmware style irq translations. It will even work on SPARC even though SPARC has it's own mechanism for translating irqs at boot time. MIPS, microblaze, embedded x86 and c6x are converted too. The resulting irq_domain code is probably still too verbose and can be optimized more, but that can be done incrementally and is a task for follow-on patches." * tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6: (31 commits) dt: fix twl4030 for non-dt compile on x86 mfd: twl-core: Add IRQ_DOMAIN dependency devicetree: Add empty of_platform_populate() for !CONFIG_OF_ADDRESS (sparc) irq_domain: Centralize definition of irq_dispose_mapping() irq_domain/mips: Allow irq_domain on MIPS irq_domain/x86: Convert x86 (embedded) to use common irq_domain ppc-6xx: fix build failure in flipper-pic.c and hlwd-pic.c irq_domain/microblaze: Convert microblaze to use irq_domains irq_domain/powerpc: Replace custom xlate functions with library functions irq_domain/powerpc: constify irq_domain_ops irq_domain/c6x: Use library of xlate functions irq_domain/c6x: constify irq_domain structures irq_domain/c6x: Convert c6x to use generic irq_domain support. irq_domain: constify irq_domain_ops irq_domain: Create common xlate functions that device drivers can use irq_domain: Remove irq_domain_add_simple() irq_domain: Remove 'new' irq_domain in favour of the ppc one mfd: twl-core.c: Fix the number of interrupts managed by twl4030 of/address: add empty static inlines for !CONFIG_OF irq_domain: Add support for base irq and hwirq in legacy mappings ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/IRQ-domain.txt117
1 files changed, 117 insertions, 0 deletions
diff --git a/Documentation/IRQ-domain.txt b/Documentation/IRQ-domain.txt
new file mode 100644
index 00000000000..27dcaabfb4d
--- /dev/null
+++ b/Documentation/IRQ-domain.txt
@@ -0,0 +1,117 @@
+irq_domain interrupt number mapping library
+
+The current design of the Linux kernel uses a single large number
+space where each separate IRQ source is assigned a different number.
+This is simple when there is only one interrupt controller, but in
+systems with multiple interrupt controllers the kernel must ensure
+that each one gets assigned non-overlapping allocations of Linux
+IRQ numbers.
+
+The irq_alloc_desc*() and irq_free_desc*() APIs provide allocation of
+irq numbers, but they don't provide any support for reverse mapping of
+the controller-local IRQ (hwirq) number into the Linux IRQ number
+space.
+
+The irq_domain library adds mapping between hwirq and IRQ numbers on
+top of the irq_alloc_desc*() API. An irq_domain to manage mapping is
+preferred over interrupt controller drivers open coding their own
+reverse mapping scheme.
+
+irq_domain also implements translation from Device Tree interrupt
+specifiers to hwirq numbers, and can be easily extended to support
+other IRQ topology data sources.
+
+=== irq_domain usage ===
+An interrupt controller driver creates and registers an irq_domain by
+calling one of the irq_domain_add_*() functions (each mapping method
+has a different allocator function, more on that later). The function
+will return a pointer to the irq_domain on success. The caller must
+provide the allocator function with an irq_domain_ops structure with
+the .map callback populated as a minimum.
+
+In most cases, the irq_domain will begin empty without any mappings
+between hwirq and IRQ numbers. Mappings are added to the irq_domain
+by calling irq_create_mapping() which accepts the irq_domain and a
+hwirq number as arguments. If a mapping for the hwirq doesn't already
+exist then it will allocate a new Linux irq_desc, associate it with
+the hwirq, and call the .map() callback so the driver can perform any
+required hardware setup.
+
+When an interrupt is received, irq_find_mapping() function should
+be used to find the Linux IRQ number from the hwirq number.
+
+If the driver has the Linux IRQ number or the irq_data pointer, and
+needs to know the associated hwirq number (such as in the irq_chip
+callbacks) then it can be directly obtained from irq_data->hwirq.
+
+=== Types of irq_domain mappings ===
+There are several mechanisms available for reverse mapping from hwirq
+to Linux irq, and each mechanism uses a different allocation function.
+Which reverse map type should be used depends on the use case. Each
+of the reverse map types are described below:
+
+==== Linear ====
+irq_domain_add_linear()
+
+The linear reverse map maintains a fixed size table indexed by the
+hwirq number. When a hwirq is mapped, an irq_desc is allocated for
+the hwirq, and the IRQ number is stored in the table.
+
+The Linear map is a good choice when the maximum number of hwirqs is
+fixed and a relatively small number (~ < 256). The advantages of this
+map are fixed time lookup for IRQ numbers, and irq_descs are only
+allocated for in-use IRQs. The disadvantage is that the table must be
+as large as the largest possible hwirq number.
+
+The majority of drivers should use the linear map.
+
+==== Tree ====
+irq_domain_add_tree()
+
+The irq_domain maintains a radix tree map from hwirq numbers to Linux
+IRQs. When an hwirq is mapped, an irq_desc is allocated and the
+hwirq is used as the lookup key for the radix tree.
+
+The tree map is a good choice if the hwirq number can be very large
+since it doesn't need to allocate a table as large as the largest
+hwirq number. The disadvantage is that hwirq to IRQ number lookup is
+dependent on how many entries are in the table.
+
+Very few drivers should need this mapping. At the moment, powerpc
+iseries is the only user.
+
+==== No Map ===-
+irq_domain_add_nomap()
+
+The No Map mapping is to be used when the hwirq number is
+programmable in the hardware. In this case it is best to program the
+Linux IRQ number into the hardware itself so that no mapping is
+required. Calling irq_create_direct_mapping() will allocate a Linux
+IRQ number and call the .map() callback so that driver can program the
+Linux IRQ number into the hardware.
+
+Most drivers cannot use this mapping.
+
+==== Legacy ====
+irq_domain_add_legacy()
+irq_domain_add_legacy_isa()
+
+The Legacy mapping is a special case for drivers that already have a
+range of irq_descs allocated for the hwirqs. It is used when the
+driver cannot be immediately converted to use the linear mapping. For
+example, many embedded system board support files use a set of #defines
+for IRQ numbers that are passed to struct device registrations. In that
+case the Linux IRQ numbers cannot be dynamically assigned and the legacy
+mapping should be used.
+
+The legacy map assumes a contiguous range of IRQ numbers has already
+been allocated for the controller and that the IRQ number can be
+calculated by adding a fixed offset to the hwirq number, and
+visa-versa. The disadvantage is that it requires the interrupt
+controller to manage IRQ allocations and it requires an irq_desc to be
+allocated for every hwirq, even if it is unused.
+
+The legacy map should only be used if fixed IRQ mappings must be
+supported. For example, ISA controllers would use the legacy map for
+mapping Linux IRQs 0-15 so that existing ISA drivers get the correct IRQ
+numbers.