summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorMichal Marek <mmarek@suse.cz>2010-10-28 00:15:57 +0200
committerMichal Marek <mmarek@suse.cz>2010-10-28 00:15:57 +0200
commitb74b953b998bcc2db91b694446f3a2619ec32de6 (patch)
tree6ce24caabd730f6ae9287ed0676ec32e6ff31e9d /Documentation
parentabb438526201c6a79949ad45375c051b6681c253 (diff)
parentf6f94e2ab1b33f0082ac22d71f66385a60d8157f (diff)
Merge commit 'v2.6.36' into kbuild/misc
Update to be able to fix a recent change to scripts/basic/docproc.c (commit eda603f).
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/00-INDEX12
-rw-r--r--Documentation/ABI/obsolete/sysfs-bus-usb31
-rw-r--r--Documentation/ABI/obsolete/sysfs-class-rfkill29
-rw-r--r--Documentation/ABI/stable/sysfs-class-rfkill67
-rw-r--r--Documentation/ABI/stable/sysfs-devices-node7
-rw-r--r--Documentation/ABI/testing/debugfs-ec20
-rw-r--r--Documentation/ABI/testing/debugfs-kmemtrace71
-rw-r--r--Documentation/ABI/testing/ima_policy12
-rw-r--r--Documentation/ABI/testing/sysfs-block14
-rw-r--r--Documentation/ABI/testing/sysfs-bus-i2c-devices-hm635221
-rw-r--r--Documentation/ABI/testing/sysfs-bus-pci27
-rw-r--r--Documentation/ABI/testing/sysfs-bus-usb39
-rw-r--r--Documentation/ABI/testing/sysfs-class-power20
-rw-r--r--Documentation/ABI/testing/sysfs-devices-memory8
-rw-r--r--Documentation/ABI/testing/sysfs-devices-node7
-rw-r--r--Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget21
-rw-r--r--Documentation/ABI/testing/sysfs-devices-power79
-rw-r--r--Documentation/ABI/testing/sysfs-devices-system-cpu2
-rw-r--r--Documentation/ABI/testing/sysfs-driver-hid-picolcd43
-rw-r--r--Documentation/ABI/testing/sysfs-driver-hid-prodikeys29
-rw-r--r--Documentation/ABI/testing/sysfs-driver-hid-roccat-kone98
-rw-r--r--Documentation/ABI/testing/sysfs-firmware-sfi15
-rw-r--r--Documentation/ABI/testing/sysfs-i2c-bmp08531
-rw-r--r--Documentation/ABI/testing/sysfs-platform-asus-laptop12
-rw-r--r--Documentation/ABI/testing/sysfs-platform-eeepc-laptop10
-rw-r--r--Documentation/ABI/testing/sysfs-power28
-rw-r--r--Documentation/ABI/testing/sysfs-wacom10
-rw-r--r--Documentation/Changes14
-rw-r--r--Documentation/DMA-API-HOWTO.txt (renamed from Documentation/PCI/PCI-DMA-mapping.txt)429
-rw-r--r--Documentation/DMA-API.txt128
-rw-r--r--Documentation/DocBook/Makefile8
-rw-r--r--Documentation/DocBook/device-drivers.tmpl4
-rw-r--r--Documentation/DocBook/deviceiobook.tmpl2
-rw-r--r--Documentation/DocBook/drm.tmpl839
-rw-r--r--Documentation/DocBook/dvb/dvbapi.xml19
-rw-r--r--Documentation/DocBook/dvb/frontend.h.xml1
-rw-r--r--Documentation/DocBook/dvb/frontend.xml10
-rw-r--r--Documentation/DocBook/kernel-api.tmpl2
-rw-r--r--Documentation/DocBook/kernel-locking.tmpl13
-rw-r--r--Documentation/DocBook/kgdb.tmpl792
-rw-r--r--Documentation/DocBook/libata.tmpl65
-rw-r--r--Documentation/DocBook/mac80211.tmpl3
-rw-r--r--Documentation/DocBook/media-entities.tmpl12
-rw-r--r--Documentation/DocBook/media.tmpl8
-rw-r--r--Documentation/DocBook/mtdnand.tmpl8
-rw-r--r--Documentation/DocBook/scsi.tmpl2
-rw-r--r--Documentation/DocBook/sh.tmpl10
-rw-r--r--Documentation/DocBook/stylesheet.xsl1
-rw-r--r--Documentation/DocBook/tracepoint.tmpl18
-rw-r--r--Documentation/DocBook/v4l/common.xml2
-rw-r--r--Documentation/DocBook/v4l/compat.xml131
-rw-r--r--Documentation/DocBook/v4l/controls.xml36
-rw-r--r--Documentation/DocBook/v4l/dev-event.xml31
-rw-r--r--Documentation/DocBook/v4l/fdl-appendix.xml2
-rw-r--r--Documentation/DocBook/v4l/io.xml21
-rw-r--r--Documentation/DocBook/v4l/lirc_device_interface.xml251
-rw-r--r--Documentation/DocBook/v4l/pixfmt-packed-rgb.xml78
-rw-r--r--Documentation/DocBook/v4l/pixfmt.xml12
-rw-r--r--Documentation/DocBook/v4l/remote_controllers.xml2
-rw-r--r--Documentation/DocBook/v4l/v4l2.xml5
-rw-r--r--Documentation/DocBook/v4l/videodev2.h.xml10
-rw-r--r--Documentation/DocBook/v4l/vidioc-dqevent.xml131
-rw-r--r--Documentation/DocBook/v4l/vidioc-enuminput.xml2
-rw-r--r--Documentation/DocBook/v4l/vidioc-g-parm.xml2
-rw-r--r--Documentation/DocBook/v4l/vidioc-qbuf.xml54
-rw-r--r--Documentation/DocBook/v4l/vidioc-query-dv-preset.xml6
-rw-r--r--Documentation/DocBook/v4l/vidioc-querybuf.xml7
-rw-r--r--Documentation/DocBook/v4l/vidioc-queryctrl.xml2
-rw-r--r--Documentation/DocBook/v4l/vidioc-reqbufs.xml36
-rw-r--r--Documentation/DocBook/v4l/vidioc-subscribe-event.xml133
-rw-r--r--Documentation/DocBook/writing-an-alsa-driver.tmpl27
-rw-r--r--Documentation/DocBook/writing_usb_driver.tmpl2
-rw-r--r--Documentation/HOWTO119
-rw-r--r--Documentation/IPMI.txt12
-rw-r--r--Documentation/Makefile4
-rw-r--r--Documentation/PCI/pci-error-recovery.txt4
-rw-r--r--Documentation/PCI/pci.txt2
-rw-r--r--Documentation/PCI/pcieaer-howto.txt29
-rw-r--r--Documentation/RCU/00-INDEX10
-rw-r--r--Documentation/RCU/NMI-RCU.txt39
-rw-r--r--Documentation/RCU/RTFP.txt63
-rw-r--r--Documentation/RCU/checklist.txt215
-rw-r--r--Documentation/RCU/lockdep.txt91
-rw-r--r--Documentation/RCU/rcu.txt48
-rw-r--r--Documentation/RCU/stallwarn.txt106
-rw-r--r--Documentation/RCU/torture.txt22
-rw-r--r--Documentation/RCU/trace.txt35
-rw-r--r--Documentation/RCU/whatisRCU.txt22
-rw-r--r--Documentation/Smack.txt2
-rw-r--r--Documentation/SubmitChecklist20
-rw-r--r--Documentation/SubmittingDrivers7
-rw-r--r--Documentation/SubmittingPatches11
-rw-r--r--Documentation/acpi/apei/einj.txt59
-rw-r--r--Documentation/acpi/method-customizing.txt2
-rw-r--r--Documentation/aoe/aoe.txt2
-rw-r--r--Documentation/apparmor.txt39
-rw-r--r--Documentation/arm/00-INDEX2
-rw-r--r--Documentation/arm/IXP20002
-rw-r--r--Documentation/arm/IXP4xx14
-rw-r--r--Documentation/arm/README4
-rw-r--r--Documentation/arm/SA1100/ADSBitsy2
-rw-r--r--Documentation/arm/SA1100/Assabet5
-rw-r--r--Documentation/arm/SA1100/Brutus2
-rw-r--r--Documentation/arm/SA1100/FreeBird2
-rw-r--r--Documentation/arm/SA1100/GraphicsClient2
-rw-r--r--Documentation/arm/SA1100/GraphicsMaster2
-rw-r--r--Documentation/arm/SA1100/Itsy2
-rw-r--r--Documentation/arm/SA1100/PLEB2
-rw-r--r--Documentation/arm/SA1100/Victor2
-rw-r--r--Documentation/arm/SA1100/nanoEngine2
-rw-r--r--Documentation/arm/SPEAr/overview.txt60
-rw-r--r--Documentation/arm/Samsung-S3C24XX/CPUfreq.txt4
-rw-r--r--Documentation/arm/Samsung-S3C24XX/GPIO.txt81
-rw-r--r--Documentation/arm/Samsung-S3C24XX/Overview.txt15
-rw-r--r--Documentation/arm/Samsung/GPIO.txt42
-rw-r--r--Documentation/arm/Samsung/Overview.txt99
-rwxr-xr-xDocumentation/arm/Samsung/clksrc-change-registers.awk167
-rw-r--r--Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen2
-rw-r--r--Documentation/arm/memory.txt14
-rw-r--r--Documentation/arm/tcm.txt30
-rw-r--r--Documentation/atomic_ops.txt2
-rw-r--r--Documentation/binfmt_misc.txt2
-rw-r--r--Documentation/blackfin/00-INDEX11
-rw-r--r--Documentation/blackfin/Filesystems169
-rw-r--r--Documentation/blackfin/bfin-gpio-notes.txt2
-rw-r--r--Documentation/blackfin/bfin-spi-notes.txt14
-rw-r--r--Documentation/blackfin/cachefeatures.txt55
-rw-r--r--Documentation/block/biodoc.txt6
-rw-r--r--Documentation/block/cfq-iosched.txt45
-rw-r--r--Documentation/block/queue-sysfs.txt10
-rw-r--r--Documentation/blockdev/paride.txt2
-rw-r--r--Documentation/bus-virt-phys-mapping.txt (renamed from Documentation/IO-mapping.txt)0
-rw-r--r--Documentation/cachetlb.txt36
-rw-r--r--Documentation/cdrom/ide-cd39
-rw-r--r--Documentation/cdrom/packet-writing.txt2
-rw-r--r--Documentation/cgroups/blkio-controller.txt177
-rw-r--r--Documentation/cgroups/cgroup_event_listener.c110
-rw-r--r--Documentation/cgroups/cgroups.txt44
-rw-r--r--Documentation/cgroups/cpusets.txt163
-rw-r--r--Documentation/cgroups/memcg_test.txt49
-rw-r--r--Documentation/cgroups/memory.txt378
-rw-r--r--Documentation/circular-buffers.txt234
-rw-r--r--Documentation/connector/cn_test.c1
-rw-r--r--Documentation/connector/connector.txt2
-rw-r--r--Documentation/console/console.txt2
-rw-r--r--Documentation/cpu-freq/governors.txt4
-rw-r--r--Documentation/cpu-freq/pcc-cpufreq.txt207
-rw-r--r--Documentation/cpu-hotplug.txt2
-rw-r--r--Documentation/credentials.txt17
-rw-r--r--Documentation/development-process/2.Process29
-rw-r--r--Documentation/development-process/4.Coding2
-rw-r--r--Documentation/development-process/7.AdvancedTopics2
-rw-r--r--Documentation/device-mapper/dm-crypt.txt2
-rw-r--r--Documentation/device-mapper/snapshot.txt44
-rw-r--r--Documentation/devices.txt12
-rw-r--r--Documentation/dontdiff1
-rw-r--r--Documentation/driver-model/platform.txt2
-rw-r--r--Documentation/dvb/ci.txt2
-rw-r--r--Documentation/dvb/contributors.txt2
-rw-r--r--Documentation/dvb/faq.txt2
-rw-r--r--Documentation/dvb/get_dvb_firmware46
-rw-r--r--Documentation/edac.txt152
-rw-r--r--Documentation/eisa.txt2
-rw-r--r--Documentation/email-clients.txt30
-rw-r--r--Documentation/fault-injection/fault-injection.txt4
-rw-r--r--Documentation/fault-injection/provoke-crashes.txt38
-rw-r--r--Documentation/fb/efifb.txt (renamed from Documentation/fb/imacfb.txt)14
-rw-r--r--Documentation/fb/framebuffer.txt2
-rw-r--r--Documentation/feature-removal-schedule.txt280
-rw-r--r--Documentation/filesystems/00-INDEX6
-rw-r--r--Documentation/filesystems/9p.txt20
-rw-r--r--Documentation/filesystems/Locking57
-rw-r--r--Documentation/filesystems/Makefile8
-rw-r--r--Documentation/filesystems/affs.txt2
-rw-r--r--Documentation/filesystems/autofs4-mount-control.txt2
-rw-r--r--Documentation/filesystems/befs.txt4
-rw-r--r--Documentation/filesystems/caching/fscache.txt10
-rw-r--r--Documentation/filesystems/ceph.txt140
-rw-r--r--Documentation/filesystems/dentry-locking.txt3
-rw-r--r--Documentation/filesystems/dlmfs.txt2
-rw-r--r--Documentation/filesystems/dnotify.txt39
-rw-r--r--Documentation/filesystems/dnotify_test.c34
-rw-r--r--Documentation/filesystems/ext3.txt15
-rw-r--r--Documentation/filesystems/fiemap.txt12
-rw-r--r--Documentation/filesystems/fuse.txt4
-rw-r--r--Documentation/filesystems/gfs2.txt12
-rw-r--r--Documentation/filesystems/hpfs.txt2
-rw-r--r--Documentation/filesystems/isofs.txt2
-rw-r--r--Documentation/filesystems/logfs.txt241
-rw-r--r--Documentation/filesystems/nfs/nfs41-server.txt7
-rw-r--r--Documentation/filesystems/nfs/nfsroot.txt2
-rw-r--r--Documentation/filesystems/nfs/rpc-cache.txt2
-rw-r--r--Documentation/filesystems/nilfs2.txt13
-rw-r--r--Documentation/filesystems/ocfs2.txt7
-rw-r--r--Documentation/filesystems/porting45
-rw-r--r--Documentation/filesystems/proc.txt169
-rw-r--r--Documentation/filesystems/sharedsubtree.txt16
-rw-r--r--Documentation/filesystems/smbfs.txt2
-rw-r--r--Documentation/filesystems/squashfs.txt34
-rw-r--r--Documentation/filesystems/sysfs-pci.txt7
-rw-r--r--Documentation/filesystems/sysfs-tagging.txt42
-rw-r--r--Documentation/filesystems/sysfs.txt46
-rw-r--r--Documentation/filesystems/tmpfs.txt16
-rw-r--r--Documentation/filesystems/vfat.txt3
-rw-r--r--Documentation/filesystems/vfs.txt17
-rw-r--r--Documentation/filesystems/xfs-delayed-logging-design.txt811
-rw-r--r--Documentation/filesystems/xfs.txt11
-rw-r--r--Documentation/firmware_class/hotplug-script17
-rw-r--r--Documentation/gpio.txt121
-rw-r--r--Documentation/hwmon/abituguru2
-rw-r--r--Documentation/hwmon/adm10262
-rw-r--r--Documentation/hwmon/adt741142
-rw-r--r--Documentation/hwmon/adt747374
-rw-r--r--Documentation/hwmon/asc7621296
-rw-r--r--Documentation/hwmon/coretemp105
-rw-r--r--Documentation/hwmon/dme173751
-rw-r--r--Documentation/hwmon/emc210333
-rw-r--r--Documentation/hwmon/g760a2
-rw-r--r--Documentation/hwmon/gl518sm3
-rw-r--r--Documentation/hwmon/hpfall.c2
-rw-r--r--Documentation/hwmon/it8753
-rw-r--r--Documentation/hwmon/jc4297
-rw-r--r--Documentation/hwmon/k8temp2
-rw-r--r--Documentation/hwmon/lm637
-rw-r--r--Documentation/hwmon/lm858
-rw-r--r--Documentation/hwmon/lm9022
-rw-r--r--Documentation/hwmon/ltc424526
-rw-r--r--Documentation/hwmon/pc8742727
-rw-r--r--Documentation/hwmon/pkgtemp36
-rw-r--r--Documentation/hwmon/smm665157
-rw-r--r--Documentation/hwmon/smsc47m111
-rw-r--r--Documentation/hwmon/sysfs-interface41
-rw-r--r--Documentation/hwmon/thmc502
-rw-r--r--Documentation/hwmon/tmp10226
-rw-r--r--Documentation/hwmon/via686a2
-rw-r--r--Documentation/hwmon/w83627ehf15
-rw-r--r--Documentation/hwmon/w83627hf6
-rw-r--r--Documentation/hwmon/w83781d2
-rw-r--r--Documentation/hwmon/w83792d2
-rw-r--r--Documentation/i2c/busses/i2c-ali15356
-rw-r--r--Documentation/i2c/busses/i2c-ali15634
-rw-r--r--Documentation/i2c/busses/i2c-ali15x318
-rw-r--r--Documentation/i2c/busses/i2c-i80111
-rw-r--r--Documentation/i2c/busses/i2c-parport3
-rw-r--r--Documentation/i2c/busses/i2c-parport-light11
-rw-r--r--Documentation/i2c/busses/i2c-pca-isa14
-rw-r--r--Documentation/i2c/busses/i2c-piix42
-rw-r--r--Documentation/i2c/busses/i2c-sis559558
-rw-r--r--Documentation/i2c/busses/i2c-sis63010
-rw-r--r--Documentation/i2c/instantiating-devices2
-rw-r--r--Documentation/i2c/smbus-protocol16
-rw-r--r--Documentation/i2c/ten-bit-addresses6
-rw-r--r--Documentation/i2c/writing-clients10
-rw-r--r--Documentation/ia64/aliasing.txt2
-rw-r--r--Documentation/ia64/serial.txt2
-rw-r--r--Documentation/infiniband/user_verbs.txt2
-rw-r--r--Documentation/init.txt49
-rw-r--r--Documentation/input/appletouch.txt2
-rw-r--r--Documentation/input/bcm5974.txt2
-rw-r--r--Documentation/input/elantech.txt8
-rw-r--r--Documentation/input/iforce-protocol.txt2
-rw-r--r--Documentation/input/joystick.txt2
-rw-r--r--Documentation/input/multi-touch-protocol.txt209
-rw-r--r--Documentation/input/rotary-encoder.txt2
-rw-r--r--Documentation/input/sentelic.txt126
-rw-r--r--Documentation/input/xpad.txt2
-rw-r--r--Documentation/intel_txt.txt30
-rw-r--r--Documentation/ioctl/ioctl-number.txt13
-rw-r--r--Documentation/isdn/INTERFACE.CAPI17
-rw-r--r--Documentation/isdn/README2
-rw-r--r--Documentation/isdn/README.HiSax2
-rw-r--r--Documentation/isdn/README.gigaset127
-rw-r--r--Documentation/ja_JP/HOWTO2
-rw-r--r--Documentation/ja_JP/SubmittingPatches6
-rw-r--r--Documentation/kbuild/kbuild.txt34
-rw-r--r--Documentation/kbuild/kconfig.txt4
-rw-r--r--Documentation/kbuild/makefiles.txt133
-rw-r--r--Documentation/kernel-doc-nano-HOWTO.txt5
-rw-r--r--Documentation/kernel-docs.txt49
-rw-r--r--Documentation/kernel-parameters.txt484
-rw-r--r--Documentation/ko_KR/HOWTO8
-rw-r--r--Documentation/kobject.txt62
-rw-r--r--Documentation/kprobes.txt204
-rw-r--r--Documentation/kvm/api.txt428
-rw-r--r--Documentation/kvm/cpuid.txt42
-rw-r--r--Documentation/kvm/mmu.txt348
-rw-r--r--Documentation/kvm/msr.txt153
-rw-r--r--Documentation/kvm/review-checklist.txt38
-rw-r--r--Documentation/laptops/00-INDEX6
-rw-r--r--Documentation/laptops/Makefile8
-rw-r--r--Documentation/laptops/acer-wmi.txt2
-rw-r--r--Documentation/laptops/dslm.c166
-rw-r--r--Documentation/laptops/laptop-mode.txt172
-rw-r--r--Documentation/laptops/thinkpad-acpi.txt145
-rw-r--r--Documentation/ldm.txt2
-rw-r--r--Documentation/lguest/Makefile3
-rw-r--r--Documentation/lguest/lguest.c26
-rw-r--r--Documentation/md.txt4
-rw-r--r--Documentation/memory-barriers.txt20
-rw-r--r--Documentation/misc-devices/c2port.txt4
-rw-r--r--Documentation/mmc/00-INDEX4
-rw-r--r--Documentation/mmc/mmc-dev-attrs.txt56
-rw-r--r--Documentation/mtd/nand_ecc.txt2
-rw-r--r--Documentation/mutex-design.txt3
-rw-r--r--Documentation/netlabel/lsm_interface.txt2
-rw-r--r--Documentation/networking/00-INDEX2
-rw-r--r--Documentation/networking/3c509.txt2
-rw-r--r--Documentation/networking/Makefile2
-rw-r--r--Documentation/networking/README.ipw21003
-rw-r--r--Documentation/networking/README.ipw22004
-rw-r--r--Documentation/networking/README.sb10004
-rw-r--r--Documentation/networking/arcnet.txt4
-rw-r--r--Documentation/networking/bonding.txt86
-rw-r--r--Documentation/networking/caif/Linux-CAIF.txt212
-rw-r--r--Documentation/networking/caif/README109
-rw-r--r--Documentation/networking/caif/spi_porting.txt208
-rw-r--r--Documentation/networking/cxacru-cf.py48
-rw-r--r--Documentation/networking/cxacru.txt16
-rw-r--r--Documentation/networking/dccp.txt6
-rw-r--r--Documentation/networking/decnet.txt2
-rw-r--r--Documentation/networking/dns_resolver.txt146
-rw-r--r--Documentation/networking/e1000.txt373
-rw-r--r--Documentation/networking/e1000e.txt302
-rw-r--r--Documentation/networking/fore200e.txt2
-rw-r--r--Documentation/networking/ifenslave.c2
-rw-r--r--Documentation/networking/igb.txt132
-rw-r--r--Documentation/networking/igbvf.txt78
-rw-r--r--Documentation/networking/ip-sysctl.txt99
-rw-r--r--Documentation/networking/ipddp.txt5
-rw-r--r--Documentation/networking/iphase.txt2
-rw-r--r--Documentation/networking/ixgbevf.txt56
-rw-r--r--Documentation/networking/l2tp.txt247
-rw-r--r--Documentation/networking/packet_mmap.txt42
-rw-r--r--Documentation/networking/pktgen.txt5
-rw-r--r--Documentation/networking/ray_cs.txt4
-rw-r--r--Documentation/networking/regulatory.txt24
-rw-r--r--Documentation/networking/s2io.txt3
-rw-r--r--Documentation/networking/skfp.txt2
-rw-r--r--Documentation/networking/stmmac.txt143
-rw-r--r--Documentation/networking/tcp-thin.txt47
-rw-r--r--Documentation/networking/timestamping.txt76
-rw-r--r--Documentation/networking/timestamping/Makefile11
-rw-r--r--Documentation/networking/timestamping/timestamping.c12
-rw-r--r--Documentation/networking/tlan.txt4
-rw-r--r--Documentation/networking/udplite.txt13
-rw-r--r--Documentation/networking/wavelan.txt73
-rw-r--r--Documentation/networking/x25-iface.txt16
-rw-r--r--Documentation/oops-tracing.txt4
-rw-r--r--Documentation/padata.txt160
-rw-r--r--Documentation/pcmcia/driver-changes.txt25
-rw-r--r--Documentation/pcmcia/locking.txt118
-rw-r--r--Documentation/pnp.txt13
-rw-r--r--Documentation/power/apm-acpi.txt2
-rw-r--r--Documentation/power/basic-pm-debugging.txt3
-rw-r--r--Documentation/power/devices.txt847
-rw-r--r--Documentation/power/pci.txt1258
-rw-r--r--Documentation/power/pm_qos_interface.txt48
-rw-r--r--Documentation/power/regulator/consumer.txt10
-rw-r--r--Documentation/power/regulator/machine.txt2
-rw-r--r--Documentation/power/regulator/overview.txt8
-rw-r--r--Documentation/power/runtime_pm.txt95
-rw-r--r--Documentation/power/tricks.txt2
-rw-r--r--Documentation/power/userland-swsusp.txt4
-rw-r--r--Documentation/power/video.txt12
-rw-r--r--Documentation/powerpc/booting-without-of.txt35
-rw-r--r--Documentation/powerpc/dts-bindings/4xx/reboot.txt18
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt22
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/can.txt53
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt54
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/diu.txt20
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/dma.txt8
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/esdhc.txt2
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/i2c.txt32
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/mpc5121-psc.txt70
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/mpc5200.txt9
-rw-r--r--Documentation/powerpc/dts-bindings/fsl/spi.txt7
-rw-r--r--Documentation/powerpc/dts-bindings/xilinx.txt2
-rw-r--r--Documentation/powerpc/hvcs.txt2
-rw-r--r--Documentation/powerpc/phyp-assisted-dump.txt2
-rw-r--r--Documentation/powerpc/ptrace.txt134
-rw-r--r--Documentation/rbtree.txt58
-rw-r--r--Documentation/rfkill.txt44
-rw-r--r--Documentation/rt-mutex-design.txt4
-rw-r--r--Documentation/s390/CommonIO6
-rw-r--r--Documentation/s390/Debugging390.txt2
-rw-r--r--Documentation/s390/driver-model.txt4
-rw-r--r--Documentation/s390/kvm.txt2
-rw-r--r--Documentation/scheduler/sched-design-CFS.txt54
-rw-r--r--Documentation/scheduler/sched-rt-group.txt20
-rw-r--r--Documentation/scsi/BusLogic.txt2
-rw-r--r--Documentation/scsi/ChangeLog.lpfc16
-rw-r--r--Documentation/scsi/ChangeLog.megaraid2
-rw-r--r--Documentation/scsi/ChangeLog.megaraid_sas16
-rw-r--r--Documentation/scsi/FlashPoint.txt6
-rw-r--r--Documentation/scsi/Mylex.txt2
-rw-r--r--Documentation/scsi/NinjaSCSI.txt2
-rw-r--r--Documentation/scsi/aic79xx.txt2
-rw-r--r--Documentation/scsi/aic7xxx.txt2
-rw-r--r--Documentation/scsi/dtc3x80.txt2
-rw-r--r--Documentation/scsi/hpsa.txt107
-rw-r--r--Documentation/scsi/ibmmca.txt2
-rw-r--r--Documentation/scsi/ncr53c8xx.txt2
-rw-r--r--Documentation/scsi/osst.txt4
-rw-r--r--Documentation/scsi/ppa.txt6
-rw-r--r--Documentation/scsi/scsi-generic.txt8
-rw-r--r--Documentation/scsi/scsi-parameters.txt139
-rw-r--r--Documentation/scsi/scsi.txt4
-rw-r--r--Documentation/scsi/scsi_fc_transport.txt4
-rw-r--r--Documentation/scsi/scsi_mid_low_api.txt2
-rw-r--r--Documentation/scsi/sym53c8xx_2.txt2
-rw-r--r--Documentation/serial/moxa-smartio2
-rw-r--r--Documentation/serial/tty.txt4
-rw-r--r--Documentation/slow-work.txt322
-rw-r--r--Documentation/sound/alsa/ALSA-Configuration.txt60
-rw-r--r--Documentation/sound/alsa/HD-Audio-Models.txt25
-rw-r--r--Documentation/sound/alsa/HD-Audio.txt49
-rw-r--r--Documentation/sound/alsa/Procfile.txt8
-rw-r--r--Documentation/sound/alsa/alsa-parameters.txt135
-rw-r--r--Documentation/sound/alsa/soc/DAI.txt2
-rw-r--r--Documentation/sound/alsa/soc/codec.txt2
-rw-r--r--Documentation/sound/alsa/soc/dapm.txt4
-rw-r--r--Documentation/sound/alsa/soc/machine.txt2
-rw-r--r--Documentation/sound/alsa/soc/overview.txt2
-rw-r--r--Documentation/sound/alsa/soc/platform.txt2
-rw-r--r--Documentation/sound/oss/README.OSS5
-rw-r--r--Documentation/sound/oss/oss-parameters.txt51
-rw-r--r--Documentation/sparse.txt6
-rw-r--r--Documentation/spi/ep93xx_spi95
-rw-r--r--Documentation/spi/spidev_fdx.c4
-rw-r--r--Documentation/spi/spidev_test.c2
-rw-r--r--Documentation/stable_kernel_rules.txt9
-rw-r--r--Documentation/sysctl/net.txt10
-rw-r--r--Documentation/sysctl/vm.txt34
-rw-r--r--Documentation/sysfs-rules.txt2
-rw-r--r--Documentation/sysrq.txt14
-rw-r--r--Documentation/telephony/ixj.txt9
-rw-r--r--Documentation/timers/00-INDEX2
-rw-r--r--Documentation/timers/Makefile8
-rw-r--r--Documentation/timers/hpet.txt273
-rw-r--r--Documentation/timers/hpet_example.c267
-rw-r--r--Documentation/timers/timers-howto.txt105
-rw-r--r--Documentation/tomoyo.txt10
-rw-r--r--Documentation/trace/events.txt11
-rw-r--r--Documentation/trace/ftrace-design.txt182
-rw-r--r--Documentation/trace/ftrace.txt54
-rw-r--r--Documentation/trace/kmemtrace.txt126
-rw-r--r--Documentation/trace/kprobetrace.txt61
-rw-r--r--Documentation/trace/postprocess/trace-vmscan-postprocess.pl686
-rw-r--r--Documentation/uml/UserModeLinux-HOWTO.txt73
-rw-r--r--Documentation/usb/WUSB-Design-overview.txt2
-rw-r--r--Documentation/usb/bulk-streams.txt78
-rw-r--r--Documentation/usb/dma.txt22
-rw-r--r--Documentation/usb/ehci.txt2
-rw-r--r--Documentation/usb/error-codes.txt6
-rw-r--r--Documentation/usb/gadget_hid.txt445
-rw-r--r--Documentation/usb/gadget_multi.txt150
-rw-r--r--Documentation/usb/gadget_serial.txt87
-rw-r--r--Documentation/usb/hotplug.txt4
-rw-r--r--Documentation/usb/linux-cdc-acm.inf107
-rw-r--r--Documentation/usb/linux.inf228
-rw-r--r--Documentation/usb/mtouchusb.txt6
-rw-r--r--Documentation/usb/power-management.txt250
-rw-r--r--Documentation/usb/usb-serial.txt33
-rw-r--r--Documentation/video4linux/API.html2
-rw-r--r--Documentation/video4linux/CARDLIST.bttv2
-rw-r--r--Documentation/video4linux/CARDLIST.cx238857
-rw-r--r--Documentation/video4linux/CARDLIST.cx881
-rw-r--r--Documentation/video4linux/CARDLIST.em28xx5
-rw-r--r--Documentation/video4linux/CARDLIST.saa71346
-rw-r--r--Documentation/video4linux/CARDLIST.tuner2
-rw-r--r--Documentation/video4linux/CQcam.txt4
-rw-r--r--Documentation/video4linux/README.cpia2
-rw-r--r--Documentation/video4linux/README.ivtv2
-rw-r--r--Documentation/video4linux/README.tlg230047
-rw-r--r--Documentation/video4linux/Zoran6
-rw-r--r--Documentation/video4linux/bttv/Cards6
-rw-r--r--Documentation/video4linux/bttv/MAKEDEV2
-rw-r--r--Documentation/video4linux/bttv/Specs4
-rw-r--r--Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt2
-rw-r--r--Documentation/video4linux/extract_xc3028.pl817
-rw-r--r--Documentation/video4linux/gspca.txt39
-rw-r--r--Documentation/video4linux/hauppauge-wintv-cx88-ir.txt2
-rw-r--r--Documentation/video4linux/ibmcam.txt5
-rw-r--r--Documentation/video4linux/se401.txt2
-rw-r--r--Documentation/video4linux/sh_mobile_ceu_camera.txt80
-rw-r--r--Documentation/video4linux/v4l2-controls.txt648
-rw-r--r--Documentation/video4linux/v4l2-framework.txt249
-rw-r--r--Documentation/video4linux/videobuf360
-rw-r--r--Documentation/video4linux/w9966.txt2
-rw-r--r--Documentation/vm/00-INDEX16
-rw-r--r--Documentation/vm/Makefile2
-rw-r--r--Documentation/vm/hugepage-mmap.c91
-rw-r--r--Documentation/vm/hugepage-shm.c98
-rw-r--r--Documentation/vm/hugetlbpage.txt169
-rw-r--r--Documentation/vm/map_hugetlb.c8
-rw-r--r--Documentation/vm/numa186
-rw-r--r--Documentation/vm/numa_memory_policy.txt4
-rw-r--r--Documentation/vm/page-types.c4
-rw-r--r--Documentation/vm/slub.txt1
-rw-r--r--Documentation/volatile-considered-harmful.txt6
-rw-r--r--Documentation/voyager.txt95
-rw-r--r--Documentation/w1/masters/ds24824
-rw-r--r--Documentation/w1/masters/mxc-w13
-rw-r--r--Documentation/w1/masters/omap-hdq2
-rw-r--r--Documentation/w1/w1.generic2
-rw-r--r--Documentation/watchdog/00-INDEX5
-rw-r--r--Documentation/watchdog/src/watchdog-simple.c3
-rw-r--r--Documentation/watchdog/src/watchdog-test.c8
-rw-r--r--Documentation/watchdog/watchdog-api.txt5
-rw-r--r--Documentation/watchdog/watchdog-parameters.txt395
-rw-r--r--Documentation/watchdog/wdt.txt15
-rw-r--r--Documentation/workqueue.txt380
-rw-r--r--Documentation/x86/x86_64/boot-options.txt20
-rw-r--r--Documentation/x86/zero-page.txt1
-rw-r--r--Documentation/zh_CN/HOWTO8
-rw-r--r--Documentation/zh_CN/SubmittingDrivers2
-rw-r--r--Documentation/zh_CN/SubmittingPatches6
-rw-r--r--Documentation/zh_CN/sparse.txt2
518 files changed, 22446 insertions, 6434 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index 06b982affe7..8dfc6708a25 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -32,8 +32,6 @@ DocBook/
- directory with DocBook templates etc. for kernel documentation.
HOWTO
- the process and procedures of how to do Linux kernel development.
-IO-mapping.txt
- - how to access I/O mapped memory from within device drivers.
IPMI.txt
- info on Linux Intelligent Platform Management Interface (IPMI) Driver.
IRQ-affinity.txt
@@ -84,6 +82,8 @@ blockdev/
- info on block devices & drivers
btmrvl.txt
- info on Marvell Bluetooth driver usage.
+bus-virt-phys-mapping.txt
+ - how to access I/O mapped memory from within device drivers.
cachetlb.txt
- describes the cache/TLB flushing interfaces Linux uses.
cdrom/
@@ -130,8 +130,6 @@ edac.txt
- information on EDAC - Error Detection And Correction
eisa.txt
- info on EISA bus support.
-exception.txt
- - how Linux v2.2 handles exceptions without verify_area etc.
fault-injection/
- dir with docs about the fault injection capabilities infrastructure.
fb/
@@ -168,6 +166,8 @@ initrd.txt
- how to use the RAM disk as an initial/temporary root filesystem.
input/
- info on Linux input device support.
+io-mapping.txt
+ - description of io_mapping functions in linux/io-mapping.h
io_ordering.txt
- info on ordering I/O writes to memory-mapped addresses.
ioctl/
@@ -232,6 +232,8 @@ memory.txt
- info on typical Linux memory problems.
mips/
- directory with info about Linux on MIPS architecture.
+mmc/
+ - directory with info about the MMC subsystem
mono.txt
- how to execute Mono-based .NET binaries with the help of BINFMT_MISC.
mutex-design.txt
@@ -250,6 +252,8 @@ numastat.txt
- info on how to read Numa policy hit/miss statistics in sysfs.
oops-tracing.txt
- how to decode those nasty internal kernel error dump messages.
+padata.txt
+ - An introduction to the "padata" parallel execution API
parisc/
- directory with info on using Linux on PA-RISC architecture.
parport.txt
diff --git a/Documentation/ABI/obsolete/sysfs-bus-usb b/Documentation/ABI/obsolete/sysfs-bus-usb
new file mode 100644
index 00000000000..bd096d33fbc
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-bus-usb
@@ -0,0 +1,31 @@
+What: /sys/bus/usb/devices/.../power/level
+Date: March 2007
+KernelVersion: 2.6.21
+Contact: Alan Stern <stern@rowland.harvard.edu>
+Description:
+ Each USB device directory will contain a file named
+ power/level. This file holds a power-level setting for
+ the device, either "on" or "auto".
+
+ "on" means that the device is not allowed to autosuspend,
+ although normal suspends for system sleep will still
+ be honored. "auto" means the device will autosuspend
+ and autoresume in the usual manner, according to the
+ capabilities of its driver.
+
+ During normal use, devices should be left in the "auto"
+ level. The "on" level is meant for administrative uses.
+ If you want to suspend a device immediately but leave it
+ free to wake up in response to I/O requests, you should
+ write "0" to power/autosuspend.
+
+ Device not capable of proper suspend and resume should be
+ left in the "on" level. Although the USB spec requires
+ devices to support suspend/resume, many of them do not.
+ In fact so many don't that by default, the USB core
+ initializes all non-hub devices in the "on" level. Some
+ drivers may change this setting when they are bound.
+
+ This file is deprecated and will be removed after 2010.
+ Use the power/control file instead; it does exactly the
+ same thing.
diff --git a/Documentation/ABI/obsolete/sysfs-class-rfkill b/Documentation/ABI/obsolete/sysfs-class-rfkill
new file mode 100644
index 00000000000..4201d5b0551
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-class-rfkill
@@ -0,0 +1,29 @@
+rfkill - radio frequency (RF) connector kill switch support
+
+For details to this subsystem look at Documentation/rfkill.txt.
+
+What: /sys/class/rfkill/rfkill[0-9]+/state
+Date: 09-Jul-2007
+KernelVersion v2.6.22
+Contact: linux-wireless@vger.kernel.org
+Description: Current state of the transmitter.
+ This file is deprecated and sheduled to be removed in 2014,
+ because its not possible to express the 'soft and hard block'
+ state of the rfkill driver.
+Values: A numeric value.
+ 0: RFKILL_STATE_SOFT_BLOCKED
+ transmitter is turned off by software
+ 1: RFKILL_STATE_UNBLOCKED
+ transmitter is (potentially) active
+ 2: RFKILL_STATE_HARD_BLOCKED
+ transmitter is forced off by something outside of
+ the driver's control.
+
+What: /sys/class/rfkill/rfkill[0-9]+/claim
+Date: 09-Jul-2007
+KernelVersion v2.6.22
+Contact: linux-wireless@vger.kernel.org
+Description: This file is deprecated because there no longer is a way to
+ claim just control over a single rfkill instance.
+ This file is scheduled to be removed in 2012.
+Values: 0: Kernel handles events
diff --git a/Documentation/ABI/stable/sysfs-class-rfkill b/Documentation/ABI/stable/sysfs-class-rfkill
new file mode 100644
index 00000000000..097f522c33b
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-class-rfkill
@@ -0,0 +1,67 @@
+rfkill - radio frequency (RF) connector kill switch support
+
+For details to this subsystem look at Documentation/rfkill.txt.
+
+For the deprecated /sys/class/rfkill/*/state and
+/sys/class/rfkill/*/claim knobs of this interface look in
+Documentation/ABI/obsolete/sysfs-class-rfkill.
+
+What: /sys/class/rfkill
+Date: 09-Jul-2007
+KernelVersion: v2.6.22
+Contact: linux-wireless@vger.kernel.org,
+Description: The rfkill class subsystem folder.
+ Each registered rfkill driver is represented by an rfkillX
+ subfolder (X being an integer > 0).
+
+
+What: /sys/class/rfkill/rfkill[0-9]+/name
+Date: 09-Jul-2007
+KernelVersion v2.6.22
+Contact: linux-wireless@vger.kernel.org
+Description: Name assigned by driver to this key (interface or driver name).
+Values: arbitrary string.
+
+
+What: /sys/class/rfkill/rfkill[0-9]+/type
+Date: 09-Jul-2007
+KernelVersion v2.6.22
+Contact: linux-wireless@vger.kernel.org
+Description: Driver type string ("wlan", "bluetooth", etc).
+Values: See include/linux/rfkill.h.
+
+
+What: /sys/class/rfkill/rfkill[0-9]+/persistent
+Date: 09-Jul-2007
+KernelVersion v2.6.22
+Contact: linux-wireless@vger.kernel.org
+Description: Whether the soft blocked state is initialised from non-volatile
+ storage at startup.
+Values: A numeric value.
+ 0: false
+ 1: true
+
+
+What: /sys/class/rfkill/rfkill[0-9]+/hard
+Date: 12-March-2010
+KernelVersion v2.6.34
+Contact: linux-wireless@vger.kernel.org
+Description: Current hardblock state. This file is read only.
+Values: A numeric value.
+ 0: inactive
+ The transmitter is (potentially) active.
+ 1: active
+ The transmitter is forced off by something outside of
+ the driver's control.
+
+
+What: /sys/class/rfkill/rfkill[0-9]+/soft
+Date: 12-March-2010
+KernelVersion v2.6.34
+Contact: linux-wireless@vger.kernel.org
+Description: Current softblock state. This file is read and write.
+Values: A numeric value.
+ 0: inactive
+ The transmitter is (potentially) active.
+ 1: active
+ The transmitter is turned off by software.
diff --git a/Documentation/ABI/stable/sysfs-devices-node b/Documentation/ABI/stable/sysfs-devices-node
new file mode 100644
index 00000000000..49b82cad700
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-devices-node
@@ -0,0 +1,7 @@
+What: /sys/devices/system/node/nodeX
+Date: October 2002
+Contact: Linux Memory Management list <linux-mm@kvack.org>
+Description:
+ When CONFIG_NUMA is enabled, this is a directory containing
+ information on node X such as what CPUs are local to the
+ node.
diff --git a/Documentation/ABI/testing/debugfs-ec b/Documentation/ABI/testing/debugfs-ec
new file mode 100644
index 00000000000..6546115a94d
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-ec
@@ -0,0 +1,20 @@
+What: /sys/kernel/debug/ec/*/{gpe,use_global_lock,io}
+Date: July 2010
+Contact: Thomas Renninger <trenn@suse.de>
+Description:
+
+General information like which GPE is assigned to the EC and whether
+the global lock should get used.
+Knowing the EC GPE one can watch the amount of HW events related to
+the EC here (XY -> GPE number from /sys/kernel/debug/ec/*/gpe):
+/sys/firmware/acpi/interrupts/gpeXY
+
+The io file is binary and a userspace tool located here:
+ftp://ftp.suse.com/pub/people/trenn/sources/ec/
+should get used to read out the 256 Embedded Controller registers
+or writing to them.
+
+CAUTION: Do not write to the Embedded Controller if you don't know
+what you are doing! Rebooting afterwards also is a good idea.
+This can influence the way your machine is cooled and fans may
+not get switched on again after you did a wrong write.
diff --git a/Documentation/ABI/testing/debugfs-kmemtrace b/Documentation/ABI/testing/debugfs-kmemtrace
deleted file mode 100644
index 5e6a92a02d8..00000000000
--- a/Documentation/ABI/testing/debugfs-kmemtrace
+++ /dev/null
@@ -1,71 +0,0 @@
-What: /sys/kernel/debug/kmemtrace/
-Date: July 2008
-Contact: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
-Description:
-
-In kmemtrace-enabled kernels, the following files are created:
-
-/sys/kernel/debug/kmemtrace/
- cpu<n> (0400) Per-CPU tracing data, see below. (binary)
- total_overruns (0400) Total number of bytes which were dropped from
- cpu<n> files because of full buffer condition,
- non-binary. (text)
- abi_version (0400) Kernel's kmemtrace ABI version. (text)
-
-Each per-CPU file should be read according to the relay interface. That is,
-the reader should set affinity to that specific CPU and, as currently done by
-the userspace application (though there are other methods), use poll() with
-an infinite timeout before every read(). Otherwise, erroneous data may be
-read. The binary data has the following _core_ format:
-
- Event ID (1 byte) Unsigned integer, one of:
- 0 - represents an allocation (KMEMTRACE_EVENT_ALLOC)
- 1 - represents a freeing of previously allocated memory
- (KMEMTRACE_EVENT_FREE)
- Type ID (1 byte) Unsigned integer, one of:
- 0 - this is a kmalloc() / kfree()
- 1 - this is a kmem_cache_alloc() / kmem_cache_free()
- 2 - this is a __get_free_pages() et al.
- Event size (2 bytes) Unsigned integer representing the
- size of this event. Used to extend
- kmemtrace. Discard the bytes you
- don't know about.
- Sequence number (4 bytes) Signed integer used to reorder data
- logged on SMP machines. Wraparound
- must be taken into account, although
- it is unlikely.
- Caller address (8 bytes) Return address to the caller.
- Pointer to mem (8 bytes) Pointer to target memory area. Can be
- NULL, but not all such calls might be
- recorded.
-
-In case of KMEMTRACE_EVENT_ALLOC events, the next fields follow:
-
- Requested bytes (8 bytes) Total number of requested bytes,
- unsigned, must not be zero.
- Allocated bytes (8 bytes) Total number of actually allocated
- bytes, unsigned, must not be lower
- than requested bytes.
- Requested flags (4 bytes) GFP flags supplied by the caller.
- Target CPU (4 bytes) Signed integer, valid for event id 1.
- If equal to -1, target CPU is the same
- as origin CPU, but the reverse might
- not be true.
-
-The data is made available in the same endianness the machine has.
-
-Other event ids and type ids may be defined and added. Other fields may be
-added by increasing event size, but see below for details.
-Every modification to the ABI, including new id definitions, are followed
-by bumping the ABI version by one.
-
-Adding new data to the packet (features) is done at the end of the mandatory
-data:
- Feature size (2 byte)
- Feature ID (1 byte)
- Feature data (Feature size - 3 bytes)
-
-
-Users:
- kmemtrace-user - git://repo.or.cz/kmemtrace-user.git
-
diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy
index 6434f0df012..6cd6daefaae 100644
--- a/Documentation/ABI/testing/ima_policy
+++ b/Documentation/ABI/testing/ima_policy
@@ -20,7 +20,7 @@ Description:
lsm: [[subj_user=] [subj_role=] [subj_type=]
[obj_user=] [obj_role=] [obj_type=]]
- base: func:= [BPRM_CHECK][FILE_MMAP][INODE_PERMISSION]
+ base: func:= [BPRM_CHECK][FILE_MMAP][FILE_CHECK]
mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
fsmagic:= hex value
uid:= decimal value
@@ -40,11 +40,11 @@ Description:
measure func=BPRM_CHECK
measure func=FILE_MMAP mask=MAY_EXEC
- measure func=INODE_PERM mask=MAY_READ uid=0
+ measure func=FILE_CHECK mask=MAY_READ uid=0
The default policy measures all executables in bprm_check,
all files mmapped executable in file_mmap, and all files
- open for read by root in inode_permission.
+ open for read by root in do_filp_open.
Examples of LSM specific definitions:
@@ -54,8 +54,8 @@ Description:
dont_measure obj_type=var_log_t
dont_measure obj_type=auditd_log_t
- measure subj_user=system_u func=INODE_PERM mask=MAY_READ
- measure subj_role=system_r func=INODE_PERM mask=MAY_READ
+ measure subj_user=system_u func=FILE_CHECK mask=MAY_READ
+ measure subj_role=system_r func=FILE_CHECK mask=MAY_READ
Smack:
- measure subj_user=_ func=INODE_PERM mask=MAY_READ
+ measure subj_user=_ func=FILE_CHECK mask=MAY_READ
diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block
index d2f90334bb9..4873c759d53 100644
--- a/Documentation/ABI/testing/sysfs-block
+++ b/Documentation/ABI/testing/sysfs-block
@@ -128,3 +128,17 @@ Description:
preferred request size for workloads where sustained
throughput is desired. If no optimal I/O size is
reported this file contains 0.
+
+What: /sys/block/<disk>/queue/nomerges
+Date: January 2010
+Contact:
+Description:
+ Standard I/O elevator operations include attempts to
+ merge contiguous I/Os. For known random I/O loads these
+ attempts will always fail and result in extra cycles
+ being spent in the kernel. This allows one to turn off
+ this behavior on one of two ways: When set to 1, complex
+ merge checks are disabled, but the simple one-shot merges
+ with the previous I/O request are enabled. When set to 2,
+ all merge tries are disabled. The default value is 0 -
+ which enables all types of merge tries.
diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-hm6352 b/Documentation/ABI/testing/sysfs-bus-i2c-devices-hm6352
new file mode 100644
index 00000000000..feb2e4a8707
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-hm6352
@@ -0,0 +1,21 @@
+Where: /sys/bus/i2c/devices/.../heading0_input
+Date: April 2010
+Kernel Version: 2.6.36?
+Contact: alan.cox@intel.com
+Description: Reports the current heading from the compass as a floating
+ point value in degrees.
+
+Where: /sys/bus/i2c/devices/.../power_state
+Date: April 2010
+Kernel Version: 2.6.36?
+Contact: alan.cox@intel.com
+Description: Sets the power state of the device. 0 sets the device into
+ sleep mode, 1 wakes it up.
+
+Where: /sys/bus/i2c/devices/.../calibration
+Date: April 2010
+Kernel Version: 2.6.36?
+Contact: alan.cox@intel.com
+Description: Sets the calibration on or off (1 = on, 0 = off). See the
+ chip data sheet.
+
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index 25be3250f7d..f979d825d11 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -139,3 +139,30 @@ Contact: linux-pci@vger.kernel.org
Description:
This symbolic link points to the PCI hotplug controller driver
module that manages the hotplug slot.
+
+What: /sys/bus/pci/devices/.../label
+Date: July 2010
+Contact: Narendra K <narendra_k@dell.com>, linux-bugs@dell.com
+Description:
+ Reading this attribute will provide the firmware
+ given name(SMBIOS type 41 string) of the PCI device.
+ The attribute will be created only if the firmware
+ has given a name to the PCI device.
+Users:
+ Userspace applications interested in knowing the
+ firmware assigned name of the PCI device.
+
+What: /sys/bus/pci/devices/.../index
+Date: July 2010
+Contact: Narendra K <narendra_k@dell.com>, linux-bugs@dell.com
+Description:
+ Reading this attribute will provide the firmware
+ given instance(SMBIOS type 41 device type instance)
+ of the PCI device. The attribute will be created
+ only if the firmware has given a device type instance
+ to the PCI device.
+Users:
+ Userspace applications interested in knowing the
+ firmware assigned device type instance of the PCI
+ device that can help in understanding the firmware
+ intended order of the PCI device.
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index a07c0f366f9..294aa864a60 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -14,34 +14,6 @@ Description:
The autosuspend delay for newly-created devices is set to
the value of the usbcore.autosuspend module parameter.
-What: /sys/bus/usb/devices/.../power/level
-Date: March 2007
-KernelVersion: 2.6.21
-Contact: Alan Stern <stern@rowland.harvard.edu>
-Description:
- Each USB device directory will contain a file named
- power/level. This file holds a power-level setting for
- the device, either "on" or "auto".
-
- "on" means that the device is not allowed to autosuspend,
- although normal suspends for system sleep will still
- be honored. "auto" means the device will autosuspend
- and autoresume in the usual manner, according to the
- capabilities of its driver.
-
- During normal use, devices should be left in the "auto"
- level. The "on" level is meant for administrative uses.
- If you want to suspend a device immediately but leave it
- free to wake up in response to I/O requests, you should
- write "0" to power/autosuspend.
-
- Device not capable of proper suspend and resume should be
- left in the "on" level. Although the USB spec requires
- devices to support suspend/resume, many of them do not.
- In fact so many don't that by default, the USB core
- initializes all non-hub devices in the "on" level. Some
- drivers may change this setting when they are bound.
-
What: /sys/bus/usb/devices/.../power/persist
Date: May 2007
KernelVersion: 2.6.23
@@ -159,3 +131,14 @@ Description:
device. This is useful to ensure auto probing won't
match the driver to the device. For example:
# echo "046d c315" > /sys/bus/usb/drivers/foo/remove_id
+
+What: /sys/bus/usb/device/.../avoid_reset_quirk
+Date: December 2009
+Contact: Oliver Neukum <oliver@neukum.org>
+Description:
+ Writing 1 to this file tells the kernel that this
+ device will morph into another mode when it is reset.
+ Drivers will not use reset for error handling for
+ such devices.
+Users:
+ usb_modeswitch
diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power
new file mode 100644
index 00000000000..78c7baca358
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-power
@@ -0,0 +1,20 @@
+What: /sys/class/power/ds2760-battery.*/charge_now
+Date: May 2010
+KernelVersion: 2.6.35
+Contact: Daniel Mack <daniel@caiaq.de>
+Description:
+ This file is writeable and can be used to set the current
+ coloumb counter value inside the battery monitor chip. This
+ is needed for unavoidable corrections of aging batteries.
+ A userspace daemon can monitor the battery charging logic
+ and once the counter drops out of considerable bounds, take
+ appropriate action.
+
+What: /sys/class/power/ds2760-battery.*/charge_full
+Date: May 2010
+KernelVersion: 2.6.35
+Contact: Daniel Mack <daniel@caiaq.de>
+Description:
+ This file is writeable and can be used to set the assumed
+ battery 'full level'. As batteries age, this value has to be
+ amended over time.
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
index bf1627b02a0..7405de26ee6 100644
--- a/Documentation/ABI/testing/sysfs-devices-memory
+++ b/Documentation/ABI/testing/sysfs-devices-memory
@@ -7,7 +7,7 @@ Description:
added or removed dynamically to represent hot-add/remove
operations.
Users: hotplug memory add/remove tools
- https://w3.opensource.ibm.com/projects/powerpc-utils/
+ http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils
What: /sys/devices/system/memory/memoryX/removable
Date: June 2008
@@ -19,7 +19,7 @@ Description:
identify removable sections of the memory before attempting
potentially expensive hot-remove memory operation
Users: hotplug memory remove tools
- https://w3.opensource.ibm.com/projects/powerpc-utils/
+ http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils
What: /sys/devices/system/memory/memoryX/phys_device
Date: September 2008
@@ -43,7 +43,7 @@ Date: September 2008
Contact: Badari Pulavarty <pbadari@us.ibm.com>
Description:
The file /sys/devices/system/memory/memoryX/state
- is read-write. When read, it's contents show the
+ is read-write. When read, its contents show the
online/offline state of the memory section. When written,
root can toggle the the online/offline state of a removable
memory section (see removable file description above)
@@ -58,7 +58,7 @@ Description:
by root to offline that section.
# echo offline > /sys/devices/system/memory/memory22/state
Users: hotplug memory remove tools
- https://w3.opensource.ibm.com/projects/powerpc-utils/
+ http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils
What: /sys/devices/system/memoryX/nodeY
diff --git a/Documentation/ABI/testing/sysfs-devices-node b/Documentation/ABI/testing/sysfs-devices-node
new file mode 100644
index 00000000000..453a210c3ce
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-node
@@ -0,0 +1,7 @@
+What: /sys/devices/system/node/nodeX/compact
+Date: February 2010
+Contact: Mel Gorman <mel@csn.ul.ie>
+Description:
+ When this file is written to, all memory within that node
+ will be compacted. When it completes, memory will be freed
+ into blocks which have as many contiguous pages as possible
diff --git a/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget b/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget
new file mode 100644
index 00000000000..d548eaac230
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-platform-_UDC_-gadget
@@ -0,0 +1,21 @@
+What: /sys/devices/platform/_UDC_/gadget/suspended
+Date: April 2010
+Contact: Fabien Chouteau <fabien.chouteau@barco.com>
+Description:
+ Show the suspend state of an USB composite gadget.
+ 1 -> suspended
+ 0 -> resumed
+
+ (_UDC_ is the name of the USB Device Controller driver)
+
+What: /sys/devices/platform/_UDC_/gadget/gadget-lunX/nofua
+Date: July 2010
+Contact: Andy Shevchenko <andy.shevchenko@gmail.com>
+Description:
+ Show or set the reaction on the FUA (Force Unit Access) bit in
+ the SCSI WRITE(10,12) commands when a gadget in USB Mass
+ Storage mode.
+
+ Possible values are:
+ 1 -> ignore the FUA flag
+ 0 -> obey the FUA flag
diff --git a/Documentation/ABI/testing/sysfs-devices-power b/Documentation/ABI/testing/sysfs-devices-power
new file mode 100644
index 00000000000..6123c523bfd
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-power
@@ -0,0 +1,79 @@
+What: /sys/devices/.../power/
+Date: January 2009
+Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+ The /sys/devices/.../power directory contains attributes
+ allowing the user space to check and modify some power
+ management related properties of given device.
+
+What: /sys/devices/.../power/wakeup
+Date: January 2009
+Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+ The /sys/devices/.../power/wakeup attribute allows the user
+ space to check if the device is enabled to wake up the system
+ from sleep states, such as the memory sleep state (suspend to
+ RAM) and hibernation (suspend to disk), and to enable or disable
+ it to do that as desired.
+
+ Some devices support "wakeup" events, which are hardware signals
+ used to activate the system from a sleep state. Such devices
+ have one of the following two values for the sysfs power/wakeup
+ file:
+
+ + "enabled\n" to issue the events;
+ + "disabled\n" not to do so;
+
+ In that cases the user space can change the setting represented
+ by the contents of this file by writing either "enabled", or
+ "disabled" to it.
+
+ For the devices that are not capable of generating system wakeup
+ events this file contains "\n". In that cases the user space
+ cannot modify the contents of this file and the device cannot be
+ enabled to wake up the system.
+
+What: /sys/devices/.../power/control
+Date: January 2009
+Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+ The /sys/devices/.../power/control attribute allows the user
+ space to control the run-time power management of the device.
+
+ All devices have one of the following two values for the
+ power/control file:
+
+ + "auto\n" to allow the device to be power managed at run time;
+ + "on\n" to prevent the device from being power managed;
+
+ The default for all devices is "auto", which means that they may
+ be subject to automatic power management, depending on their
+ drivers. Changing this attribute to "on" prevents the driver
+ from power managing the device at run time. Doing that while
+ the device is suspended causes it to be woken up.
+
+What: /sys/devices/.../power/async
+Date: January 2009
+Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+ The /sys/devices/.../async attribute allows the user space to
+ enable or diasble the device's suspend and resume callbacks to
+ be executed asynchronously (ie. in separate threads, in parallel
+ with the main suspend/resume thread) during system-wide power
+ transitions (eg. suspend to RAM, hibernation).
+
+ All devices have one of the following two values for the
+ power/async file:
+
+ + "enabled\n" to permit the asynchronous suspend/resume;
+ + "disabled\n" to forbid it;
+
+ The value of this attribute may be changed by writing either
+ "enabled", or "disabled" to it.
+
+ It generally is unsafe to permit the asynchronous suspend/resume
+ of a device unless it is certain that all of the PM dependencies
+ of the device are known to the PM core. However, for some
+ devices this attribute is set to "enabled" by bus type code or
+ device drivers and in that cases it should be safe to leave the
+ default value.
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index 84a710f87c6..7564e88bfa4 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -197,7 +197,7 @@ Description: These files exist in every cpu's cache index directories.
Currently, only AMD Family 10h Processors support cache index
disable, and only for their L3 caches. See the BIOS and
Kernel Developer's Guide at
- http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf
+ http://support.amd.com/us/Embedded_TechDocs/31116-Public-GH-BKDG_3-28_5-28-09.pdf
for formatting information and other details on the
cache index disable.
Users: joachim.deguara@amd.com
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-picolcd b/Documentation/ABI/testing/sysfs-driver-hid-picolcd
new file mode 100644
index 00000000000..08579e7e1e8
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-picolcd
@@ -0,0 +1,43 @@
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/operation_mode
+Date: March 2010
+Contact: Bruno Prémont <bonbons@linux-vserver.org>
+Description: Make it possible to switch the PicoLCD device between LCD
+ (firmware) and bootloader (flasher) operation modes.
+
+ Reading: returns list of available modes, the active mode being
+ enclosed in brackets ('[' and ']')
+
+ Writing: causes operation mode switch. Permitted values are
+ the non-active mode names listed when read.
+
+ Note: when switching mode the current PicoLCD HID device gets
+ disconnected and reconnects after above delay (see attribute
+ operation_mode_delay for its value).
+
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/operation_mode_delay
+Date: April 2010
+Contact: Bruno Prémont <bonbons@linux-vserver.org>
+Description: Delay PicoLCD waits before restarting in new mode when
+ operation_mode has changed.
+
+ Reading/Writing: It is expressed in ms and permitted range is
+ 0..30000ms.
+
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/fb_update_rate
+Date: March 2010
+Contact: Bruno Prémont <bonbons@linux-vserver.org>
+Description: Make it possible to adjust defio refresh rate.
+
+ Reading: returns list of available refresh rates (expressed in Hz),
+ the active refresh rate being enclosed in brackets ('[' and ']')
+
+ Writing: accepts new refresh rate expressed in integer Hz
+ within permitted rates.
+
+ Note: As device can barely do 2 complete refreshes a second
+ it only makes sense to adjust this value if only one or two
+ tiles get changed and it's not appropriate to expect the application
+ to flush it's tiny changes explicitely at higher than default rate.
+
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-prodikeys b/Documentation/ABI/testing/sysfs-driver-hid-prodikeys
new file mode 100644
index 00000000000..05d988c29a8
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-prodikeys
@@ -0,0 +1,29 @@
+What: /sys/bus/hid/drivers/prodikeys/.../channel
+Date: April 2010
+KernelVersion: 2.6.34
+Contact: Don Prince <dhprince.devel@yahoo.co.uk>
+Description:
+ Allows control (via software) the midi channel to which
+ that the pc-midi keyboard will output.midi data.
+ Range: 0..15
+ Type: Read/write
+What: /sys/bus/hid/drivers/prodikeys/.../sustain
+Date: April 2010
+KernelVersion: 2.6.34
+Contact: Don Prince <dhprince.devel@yahoo.co.uk>
+Description:
+ Allows control (via software) the sustain duration of a
+ note held by the pc-midi driver.
+ 0 means sustain mode is disabled.
+ Range: 0..5000 (milliseconds)
+ Type: Read/write
+What: /sys/bus/hid/drivers/prodikeys/.../octave
+Date: April 2010
+KernelVersion: 2.6.34
+Contact: Don Prince <dhprince.devel@yahoo.co.uk>
+Description:
+ Controls the octave shift modifier in the pc-midi driver.
+ The octave can be shifted via software up/down 2 octaves.
+ 0 means the no ocatve shift.
+ Range: -2..2 (minus 2 to plus 2)
+ Type: Read/Write
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
new file mode 100644
index 00000000000..063bda7fe70
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-kone
@@ -0,0 +1,98 @@
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_dpi
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: It is possible to switch the dpi setting of the mouse with the
+ press of a button.
+ When read, this file returns the raw number of the actual dpi
+ setting reported by the mouse. This number has to be further
+ processed to receive the real dpi value.
+
+ VALUE DPI
+ 1 800
+ 2 1200
+ 3 1600
+ 4 2000
+ 5 2400
+ 6 3200
+
+ This file is readonly.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/actual_profile
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: When read, this file returns the number of the actual profile.
+ This file is readonly.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/firmware_version
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: When read, this file returns the raw integer version number of the
+ firmware reported by the mouse. Using the integer value eases
+ further usage in other programs. To receive the real version
+ number the decimal point has to be shifted 2 positions to the
+ left. E.g. a returned value of 138 means 1.38
+ This file is readonly.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/profile[1-5]
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The mouse can store 5 profiles which can be switched by the
+ press of a button. A profile holds informations like button
+ mappings, sensitivity, the colors of the 5 leds and light
+ effects.
+ When read, these files return the respective profile. The
+ returned data is 975 bytes in size.
+ When written, this file lets one write the respective profile
+ data back to the mouse. The data has to be 975 bytes long.
+ The mouse will reject invalid data, whereas the profile number
+ stored in the profile doesn't need to fit the number of the
+ store.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/settings
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: When read, this file returns the settings stored in the mouse.
+ The size of the data is 36 bytes and holds information like the
+ startup_profile, tcu state and calibration_data.
+ When written, this file lets write settings back to the mouse.
+ The data has to be 36 bytes long. The mouse will reject invalid
+ data.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/startup_profile
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The integer value of this attribute ranges from 1 to 5.
+ When read, this attribute returns the number of the profile
+ that's active when the mouse is powered on.
+ When written, this file sets the number of the startup profile
+ and the mouse activates this profile immediately.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/tcu
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The mouse has a "Tracking Control Unit" which lets the user
+ calibrate the laser power to fit the mousepad surface.
+ When read, this file returns the current state of the TCU,
+ where 0 means off and 1 means on.
+ Writing 0 in this file will switch the TCU off.
+ Writing 1 in this file will start the calibration which takes
+ around 6 seconds to complete and activates the TCU.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/weight
+Date: March 2010
+Contact: Stefan Achatz <erazor_de@users.sourceforge.net>
+Description: The mouse can be equipped with one of four supplied weights
+ ranging from 5 to 20 grams which are recognized by the mouse
+ and its value can be read out. When read, this file returns the
+ raw value returned by the mouse which eases further processing
+ in other software.
+ The values map to the weights as follows:
+
+ VALUE WEIGHT
+ 0 none
+ 1 5g
+ 2 10g
+ 3 15g
+ 4 20g
+
+ This file is readonly.
diff --git a/Documentation/ABI/testing/sysfs-firmware-sfi b/Documentation/ABI/testing/sysfs-firmware-sfi
new file mode 100644
index 00000000000..4be7d44aeac
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-sfi
@@ -0,0 +1,15 @@
+What: /sys/firmware/sfi/tables/
+Date: May 2010
+Contact: Len Brown <lenb@kernel.org>
+Description:
+ SFI defines a number of small static memory tables
+ so the kernel can get platform information from firmware.
+
+ The tables are defined in the latest SFI specification:
+ http://simplefirmware.org/documentation
+
+ While the tables are used by the kernel, user-space
+ can observe them this way:
+
+ # cd /sys/firmware/sfi/tables
+ # cat $TABLENAME > $TABLENAME.bin
diff --git a/Documentation/ABI/testing/sysfs-i2c-bmp085 b/Documentation/ABI/testing/sysfs-i2c-bmp085
new file mode 100644
index 00000000000..585962ad046
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-i2c-bmp085
@@ -0,0 +1,31 @@
+What: /sys/bus/i2c/devices/<busnum>-<devaddr>/pressure0_input
+Date: June 2010
+Contact: Christoph Mair <christoph.mair@gmail.com>
+Description: Start a pressure measurement and read the result. Values
+ represent the ambient air pressure in pascal (0.01 millibar).
+
+ Reading: returns the current air pressure.
+
+
+What: /sys/bus/i2c/devices/<busnum>-<devaddr>/temp0_input
+Date: June 2010
+Contact: Christoph Mair <christoph.mair@gmail.com>
+Description: Measure the ambient temperature. The returned value represents
+ the ambient temperature in units of 0.1 degree celsius.
+
+ Reading: returns the current temperature.
+
+
+What: /sys/bus/i2c/devices/<busnum>-<devaddr>/oversampling
+Date: June 2010
+Contact: Christoph Mair <christoph.mair@gmail.com>
+Description: Tell the bmp085 to use more samples to calculate a pressure
+ value. When writing to this file the chip will use 2^x samples
+ to calculate the next pressure value with x being the value
+ written. Using this feature will decrease RMS noise and
+ increase the measurement time.
+
+ Reading: returns the current oversampling setting.
+
+ Writing: sets a new oversampling setting.
+ Accepted values: 0..3.
diff --git a/Documentation/ABI/testing/sysfs-platform-asus-laptop b/Documentation/ABI/testing/sysfs-platform-asus-laptop
index a1cb660c50c..1d775390e85 100644
--- a/Documentation/ABI/testing/sysfs-platform-asus-laptop
+++ b/Documentation/ABI/testing/sysfs-platform-asus-laptop
@@ -1,4 +1,4 @@
-What: /sys/devices/platform/asus-laptop/display
+What: /sys/devices/platform/asus_laptop/display
Date: January 2007
KernelVersion: 2.6.20
Contact: "Corentin Chary" <corentincj@iksaif.net>
@@ -13,7 +13,7 @@ Description:
Ex: - 0 (0000b) means no display
- 3 (0011b) CRT+LCD.
-What: /sys/devices/platform/asus-laptop/gps
+What: /sys/devices/platform/asus_laptop/gps
Date: January 2007
KernelVersion: 2.6.20
Contact: "Corentin Chary" <corentincj@iksaif.net>
@@ -21,7 +21,7 @@ Description:
Control the gps device. 1 means on, 0 means off.
Users: Lapsus
-What: /sys/devices/platform/asus-laptop/ledd
+What: /sys/devices/platform/asus_laptop/ledd
Date: January 2007
KernelVersion: 2.6.20
Contact: "Corentin Chary" <corentincj@iksaif.net>
@@ -29,11 +29,11 @@ Description:
Some models like the W1N have a LED display that can be
used to display several informations.
To control the LED display, use the following :
- echo 0x0T000DDD > /sys/devices/platform/asus-laptop/
+ echo 0x0T000DDD > /sys/devices/platform/asus_laptop/
where T control the 3 letters display, and DDD the 3 digits display.
The DDD table can be found in Documentation/laptops/asus-laptop.txt
-What: /sys/devices/platform/asus-laptop/bluetooth
+What: /sys/devices/platform/asus_laptop/bluetooth
Date: January 2007
KernelVersion: 2.6.20
Contact: "Corentin Chary" <corentincj@iksaif.net>
@@ -42,7 +42,7 @@ Description:
This may control the led, the device or both.
Users: Lapsus
-What: /sys/devices/platform/asus-laptop/wlan
+What: /sys/devices/platform/asus_laptop/wlan
Date: January 2007
KernelVersion: 2.6.20
Contact: "Corentin Chary" <corentincj@iksaif.net>
diff --git a/Documentation/ABI/testing/sysfs-platform-eeepc-laptop b/Documentation/ABI/testing/sysfs-platform-eeepc-laptop
index 7445dfb321b..5b026c69587 100644
--- a/Documentation/ABI/testing/sysfs-platform-eeepc-laptop
+++ b/Documentation/ABI/testing/sysfs-platform-eeepc-laptop
@@ -1,4 +1,4 @@
-What: /sys/devices/platform/eeepc-laptop/disp
+What: /sys/devices/platform/eeepc/disp
Date: May 2008
KernelVersion: 2.6.26
Contact: "Corentin Chary" <corentincj@iksaif.net>
@@ -9,21 +9,21 @@ Description:
- 3 = LCD+CRT
If you run X11, you should use xrandr instead.
-What: /sys/devices/platform/eeepc-laptop/camera
+What: /sys/devices/platform/eeepc/camera
Date: May 2008
KernelVersion: 2.6.26
Contact: "Corentin Chary" <corentincj@iksaif.net>
Description:
Control the camera. 1 means on, 0 means off.
-What: /sys/devices/platform/eeepc-laptop/cardr
+What: /sys/devices/platform/eeepc/cardr
Date: May 2008
KernelVersion: 2.6.26
Contact: "Corentin Chary" <corentincj@iksaif.net>
Description:
Control the card reader. 1 means on, 0 means off.
-What: /sys/devices/platform/eeepc-laptop/cpufv
+What: /sys/devices/platform/eeepc/cpufv
Date: Jun 2009
KernelVersion: 2.6.31
Contact: "Corentin Chary" <corentincj@iksaif.net>
@@ -42,7 +42,7 @@ Description:
`------------ Availables modes
For example, 0x301 means: mode 1 selected, 3 available modes.
-What: /sys/devices/platform/eeepc-laptop/available_cpufv
+What: /sys/devices/platform/eeepc/available_cpufv
Date: Jun 2009
KernelVersion: 2.6.31
Contact: "Corentin Chary" <corentincj@iksaif.net>
diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power
index dcff4d0623a..2875f1f74a0 100644
--- a/Documentation/ABI/testing/sysfs-power
+++ b/Documentation/ABI/testing/sysfs-power
@@ -101,3 +101,31 @@ Description:
CAUTION: Using it will cause your machine's real-time (CMOS)
clock to be set to a random invalid time after a resume.
+
+What: /sys/power/pm_async
+Date: January 2009
+Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+ The /sys/power/pm_async file controls the switch allowing the
+ user space to enable or disable asynchronous suspend and resume
+ of devices. If enabled, this feature will cause some device
+ drivers' suspend and resume callbacks to be executed in parallel
+ with each other and with the main suspend thread. It is enabled
+ if this file contains "1", which is the default. It may be
+ disabled by writing "0" to this file, in which case all devices
+ will be suspended and resumed synchronously.
+
+What: /sys/power/wakeup_count
+Date: July 2010
+Contact: Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+ The /sys/power/wakeup_count file allows user space to put the
+ system into a sleep state while taking into account the
+ concurrent arrival of wakeup events. Reading from it returns
+ the current number of registered wakeup events and it blocks if
+ some wakeup events are being processed at the time the file is
+ read from. Writing to it will only succeed if the current
+ number of wakeup events is equal to the written value and, if
+ successful, will make the kernel abort a subsequent transition
+ to a sleep state if any wakeup events are reported after the
+ write has returned.
diff --git a/Documentation/ABI/testing/sysfs-wacom b/Documentation/ABI/testing/sysfs-wacom
new file mode 100644
index 00000000000..1517976e25c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-wacom
@@ -0,0 +1,10 @@
+What: /sys/class/hidraw/hidraw*/device/speed
+Date: April 2010
+Kernel Version: 2.6.35
+Contact: linux-bluetooth@vger.kernel.org
+Description:
+ The /sys/class/hidraw/hidraw*/device/speed file controls
+ reporting speed of wacom bluetooth tablet. Reading from
+ this file returns 1 if tablet reports in high speed mode
+ or 0 otherwise. Writing to this file one of these values
+ switches reporting speed.
diff --git a/Documentation/Changes b/Documentation/Changes
index f08b313cd23..4fb88f15f2e 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -49,7 +49,7 @@ o oprofile 0.9 # oprofiled --version
o udev 081 # udevinfo -V
o grub 0.93 # grub --version
o mcelog 0.6
-o iptables 1.4.1 # iptables -V
+o iptables 1.4.2 # iptables -V
Kernel compilation
@@ -331,7 +331,7 @@ o <ftp://ftp.kernel.org/pub/linux/kernel/people/rusty/modules/>
Mkinitrd
--------
-o <ftp://rawhide.redhat.com/pub/rawhide/SRPMS/SRPMS/>
+o <https://code.launchpad.net/initrd-tools/main>
E2fsprogs
---------
@@ -343,11 +343,11 @@ o <http://jfs.sourceforge.net/>
Reiserfsprogs
-------------
-o <http://www.namesys.com/pub/reiserfsprogs/reiserfsprogs-3.6.3.tar.gz>
+o <http://www.kernel.org/pub/linux/utils/fs/reiserfs/>
Xfsprogs
--------
-o <ftp://oss.sgi.com/projects/xfs/download/>
+o <ftp://oss.sgi.com/projects/xfs/>
Pcmciautils
-----------
@@ -387,18 +387,18 @@ o <http://sourceforge.net/projects/fuse>
mcelog
------
-o <ftp://ftp.kernel.org/pub/linux/utils/cpu/mce/mcelog/>
+o <ftp://ftp.kernel.org/pub/linux/utils/cpu/mce/>
Networking
**********
PPP
---
-o <ftp://ftp.samba.org/pub/ppp/ppp-2.4.0.tar.gz>
+o <ftp://ftp.samba.org/pub/ppp/>
Isdn4k-utils
------------
-o <ftp://ftp.isdn4linux.de/pub/isdn4linux/utils/isdn4k-utils.v3.1pre1.tar.gz>
+o <ftp://ftp.isdn4linux.de/pub/isdn4linux/utils/>
NFS-utils
---------
diff --git a/Documentation/PCI/PCI-DMA-mapping.txt b/Documentation/DMA-API-HOWTO.txt
index ecad88d9fe5..d568bc235bc 100644
--- a/Documentation/PCI/PCI-DMA-mapping.txt
+++ b/Documentation/DMA-API-HOWTO.txt
@@ -1,12 +1,12 @@
- Dynamic DMA mapping
- ===================
+ Dynamic DMA mapping Guide
+ =========================
David S. Miller <davem@redhat.com>
Richard Henderson <rth@cygnus.com>
Jakub Jelinek <jakub@redhat.com>
-This document describes the DMA mapping system in terms of the pci_
-API. For a similar API that works for generic devices, see
+This is a guide to device driver writers on how to use the DMA API
+with example pseudo-code. For a concise description of the API, see
DMA-API.txt.
Most of the 64bit platforms have special hardware that translates bus
@@ -26,12 +26,15 @@ mapped only for the time they are actually used and unmapped after the DMA
transfer.
The following API will work of course even on platforms where no such
-hardware exists, see e.g. arch/x86/include/asm/pci.h for how it is implemented on
-top of the virt_to_bus interface.
+hardware exists.
+
+Note that the DMA API works with any bus independent of the underlying
+microprocessor architecture. You should use the DMA API rather than
+the bus specific DMA API (e.g. pci_dma_*).
First of all, you should make sure
-#include <linux/pci.h>
+#include <linux/dma-mapping.h>
is in your driver. This file will obtain for you the definition of the
dma_addr_t (which can hold any valid DMA address for the platform)
@@ -78,44 +81,43 @@ for you to DMA from/to.
DMA addressing limitations
Does your device have any DMA addressing limitations? For example, is
-your device only capable of driving the low order 24-bits of address
-on the PCI bus for SAC DMA transfers? If so, you need to inform the
-PCI layer of this fact.
+your device only capable of driving the low order 24-bits of address?
+If so, you need to inform the kernel of this fact.
By default, the kernel assumes that your device can address the full
-32-bits in a SAC cycle. For a 64-bit DAC capable device, this needs
-to be increased. And for a device with limitations, as discussed in
-the previous paragraph, it needs to be decreased.
-
-pci_alloc_consistent() by default will return 32-bit DMA addresses.
-PCI-X specification requires PCI-X devices to support 64-bit
-addressing (DAC) for all transactions. And at least one platform (SGI
-SN2) requires 64-bit consistent allocations to operate correctly when
-the IO bus is in PCI-X mode. Therefore, like with pci_set_dma_mask(),
-it's good practice to call pci_set_consistent_dma_mask() to set the
-appropriate mask even if your device only supports 32-bit DMA
-(default) and especially if it's a PCI-X device.
-
-For correct operation, you must interrogate the PCI layer in your
-device probe routine to see if the PCI controller on the machine can
-properly support the DMA addressing limitation your device has. It is
-good style to do this even if your device holds the default setting,
+32-bits. For a 64-bit capable device, this needs to be increased.
+And for a device with limitations, as discussed in the previous
+paragraph, it needs to be decreased.
+
+Special note about PCI: PCI-X specification requires PCI-X devices to
+support 64-bit addressing (DAC) for all transactions. And at least
+one platform (SGI SN2) requires 64-bit consistent allocations to
+operate correctly when the IO bus is in PCI-X mode.
+
+For correct operation, you must interrogate the kernel in your device
+probe routine to see if the DMA controller on the machine can properly
+support the DMA addressing limitation your device has. It is good
+style to do this even if your device holds the default setting,
because this shows that you did think about these issues wrt. your
device.
-The query is performed via a call to pci_set_dma_mask():
+The query is performed via a call to dma_set_mask():
- int pci_set_dma_mask(struct pci_dev *pdev, u64 device_mask);
+ int dma_set_mask(struct device *dev, u64 mask);
The query for consistent allocations is performed via a call to
-pci_set_consistent_dma_mask():
+dma_set_coherent_mask():
- int pci_set_consistent_dma_mask(struct pci_dev *pdev, u64 device_mask);
+ int dma_set_coherent_mask(struct device *dev, u64 mask);
-Here, pdev is a pointer to the PCI device struct of your device, and
-device_mask is a bit mask describing which bits of a PCI address your
-device supports. It returns zero if your card can perform DMA
-properly on the machine given the address mask you provided.
+Here, dev is a pointer to the device struct of your device, and mask
+is a bit mask describing which bits of an address your device
+supports. It returns zero if your card can perform DMA properly on
+the machine given the address mask you provided. In general, the
+device struct of your device is embedded in the bus specific device
+struct of your device. For example, a pointer to the device struct of
+your PCI device is pdev->dev (pdev is a pointer to the PCI device
+struct of your device).
If it returns non-zero, your device cannot perform DMA properly on
this platform, and attempting to do so will result in undefined
@@ -133,31 +135,30 @@ of your driver reports that performance is bad or that the device is not
even detected, you can ask them for the kernel messages to find out
exactly why.
-The standard 32-bit addressing PCI device would do something like
-this:
+The standard 32-bit addressing device would do something like this:
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ if (dma_set_mask(dev, DMA_BIT_MASK(32))) {
printk(KERN_WARNING
"mydev: No suitable DMA available.\n");
goto ignore_this_device;
}
-Another common scenario is a 64-bit capable device. The approach
-here is to try for 64-bit DAC addressing, but back down to a
-32-bit mask should that fail. The PCI platform code may fail the
-64-bit mask not because the platform is not capable of 64-bit
-addressing. Rather, it may fail in this case simply because
-32-bit SAC addressing is done more efficiently than DAC addressing.
-Sparc64 is one platform which behaves in this way.
+Another common scenario is a 64-bit capable device. The approach here
+is to try for 64-bit addressing, but back down to a 32-bit mask that
+should not fail. The kernel may fail the 64-bit mask not because the
+platform is not capable of 64-bit addressing. Rather, it may fail in
+this case simply because 32-bit addressing is done more efficiently
+than 64-bit addressing. For example, Sparc64 PCI SAC addressing is
+more efficient than DAC addressing.
Here is how you would handle a 64-bit capable device which can drive
all 64-bits when accessing streaming DMA:
int using_dac;
- if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ if (!dma_set_mask(dev, DMA_BIT_MASK(64))) {
using_dac = 1;
- } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ } else if (!dma_set_mask(dev, DMA_BIT_MASK(32))) {
using_dac = 0;
} else {
printk(KERN_WARNING
@@ -170,36 +171,36 @@ the case would look like this:
int using_dac, consistent_using_dac;
- if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ if (!dma_set_mask(dev, DMA_BIT_MASK(64))) {
using_dac = 1;
consistent_using_dac = 1;
- pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
- } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ dma_set_coherent_mask(dev, DMA_BIT_MASK(64));
+ } else if (!dma_set_mask(dev, DMA_BIT_MASK(32))) {
using_dac = 0;
consistent_using_dac = 0;
- pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
} else {
printk(KERN_WARNING
"mydev: No suitable DMA available.\n");
goto ignore_this_device;
}
-pci_set_consistent_dma_mask() will always be able to set the same or a
-smaller mask as pci_set_dma_mask(). However for the rare case that a
+dma_set_coherent_mask() will always be able to set the same or a
+smaller mask as dma_set_mask(). However for the rare case that a
device driver only uses consistent allocations, one would have to
-check the return value from pci_set_consistent_dma_mask().
+check the return value from dma_set_coherent_mask().
Finally, if your device can only drive the low 24-bits of
-address during PCI bus mastering you might do something like:
+address you might do something like:
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(24))) {
+ if (dma_set_mask(dev, DMA_BIT_MASK(24))) {
printk(KERN_WARNING
"mydev: 24-bit DMA addressing not available.\n");
goto ignore_this_device;
}
-When pci_set_dma_mask() is successful, and returns zero, the PCI layer
-saves away this mask you have provided. The PCI layer will use this
+When dma_set_mask() is successful, and returns zero, the kernel saves
+away this mask you have provided. The kernel will use this
information later when you make DMA mappings.
There is a case which we are aware of at this time, which is worth
@@ -208,7 +209,7 @@ functions (for example a sound card provides playback and record
functions) and the various different functions have _different_
DMA addressing limitations, you may wish to probe each mask and
only provide the functionality which the machine can handle. It
-is important that the last call to pci_set_dma_mask() be for the
+is important that the last call to dma_set_mask() be for the
most specific mask.
Here is pseudo-code showing how this might be done:
@@ -217,17 +218,17 @@ Here is pseudo-code showing how this might be done:
#define RECORD_ADDRESS_BITS DMA_BIT_MASK(24)
struct my_sound_card *card;
- struct pci_dev *pdev;
+ struct device *dev;
...
- if (!pci_set_dma_mask(pdev, PLAYBACK_ADDRESS_BITS)) {
+ if (!dma_set_mask(dev, PLAYBACK_ADDRESS_BITS)) {
card->playback_enabled = 1;
} else {
card->playback_enabled = 0;
printk(KERN_WARNING "%s: Playback disabled due to DMA limitations.\n",
card->name);
}
- if (!pci_set_dma_mask(pdev, RECORD_ADDRESS_BITS)) {
+ if (!dma_set_mask(dev, RECORD_ADDRESS_BITS)) {
card->record_enabled = 1;
} else {
card->record_enabled = 0;
@@ -252,8 +253,8 @@ There are two types of DMA mappings:
Think of "consistent" as "synchronous" or "coherent".
The current default is to return consistent memory in the low 32
- bits of the PCI bus space. However, for future compatibility you
- should set the consistent mask even if this default is fine for your
+ bits of the bus space. However, for future compatibility you should
+ set the consistent mask even if this default is fine for your
driver.
Good examples of what to use consistent mappings for are:
@@ -285,9 +286,9 @@ There are two types of DMA mappings:
found in PCI bridges (such as by reading a register's value
after writing it).
-- Streaming DMA mappings which are usually mapped for one DMA transfer,
- unmapped right after it (unless you use pci_dma_sync_* below) and for which
- hardware can optimize for sequential accesses.
+- Streaming DMA mappings which are usually mapped for one DMA
+ transfer, unmapped right after it (unless you use dma_sync_* below)
+ and for which hardware can optimize for sequential accesses.
This of "streaming" as "asynchronous" or "outside the coherency
domain".
@@ -302,8 +303,8 @@ There are two types of DMA mappings:
optimizations the hardware allows. To this end, when using
such mappings you must be explicit about what you want to happen.
-Neither type of DMA mapping has alignment restrictions that come
-from PCI, although some devices may have such restrictions.
+Neither type of DMA mapping has alignment restrictions that come from
+the underlying bus, although some devices may have such restrictions.
Also, systems with caches that aren't DMA-coherent will work better
when the underlying buffers don't share cache lines with other data.
@@ -315,33 +316,27 @@ you should do:
dma_addr_t dma_handle;
- cpu_addr = pci_alloc_consistent(pdev, size, &dma_handle);
-
-where pdev is a struct pci_dev *. This may be called in interrupt context.
-You should use dma_alloc_coherent (see DMA-API.txt) for buses
-where devices don't have struct pci_dev (like ISA, EISA).
+ cpu_addr = dma_alloc_coherent(dev, size, &dma_handle, gfp);
-This argument is needed because the DMA translations may be bus
-specific (and often is private to the bus which the device is attached
-to).
+where device is a struct device *. This may be called in interrupt
+context with the GFP_ATOMIC flag.
Size is the length of the region you want to allocate, in bytes.
This routine will allocate RAM for that region, so it acts similarly to
__get_free_pages (but takes size instead of a page order). If your
driver needs regions sized smaller than a page, you may prefer using
-the pci_pool interface, described below.
-
-The consistent DMA mapping interfaces, for non-NULL pdev, will by
-default return a DMA address which is SAC (Single Address Cycle)
-addressable. Even if the device indicates (via PCI dma mask) that it
-may address the upper 32-bits and thus perform DAC cycles, consistent
-allocation will only return > 32-bit PCI addresses for DMA if the
-consistent dma mask has been explicitly changed via
-pci_set_consistent_dma_mask(). This is true of the pci_pool interface
-as well.
-
-pci_alloc_consistent returns two values: the virtual address which you
+the dma_pool interface, described below.
+
+The consistent DMA mapping interfaces, for non-NULL dev, will by
+default return a DMA address which is 32-bit addressable. Even if the
+device indicates (via DMA mask) that it may address the upper 32-bits,
+consistent allocation will only return > 32-bit addresses for DMA if
+the consistent DMA mask has been explicitly changed via
+dma_set_coherent_mask(). This is true of the dma_pool interface as
+well.
+
+dma_alloc_coherent returns two values: the virtual address which you
can use to access it from the CPU and dma_handle which you pass to the
card.
@@ -354,54 +349,54 @@ buffer you receive will not cross a 64K boundary.
To unmap and free such a DMA region, you call:
- pci_free_consistent(pdev, size, cpu_addr, dma_handle);
+ dma_free_coherent(dev, size, cpu_addr, dma_handle);
-where pdev, size are the same as in the above call and cpu_addr and
-dma_handle are the values pci_alloc_consistent returned to you.
+where dev, size are the same as in the above call and cpu_addr and
+dma_handle are the values dma_alloc_coherent returned to you.
This function may not be called in interrupt context.
If your driver needs lots of smaller memory regions, you can write
-custom code to subdivide pages returned by pci_alloc_consistent,
-or you can use the pci_pool API to do that. A pci_pool is like
-a kmem_cache, but it uses pci_alloc_consistent not __get_free_pages.
+custom code to subdivide pages returned by dma_alloc_coherent,
+or you can use the dma_pool API to do that. A dma_pool is like
+a kmem_cache, but it uses dma_alloc_coherent not __get_free_pages.
Also, it understands common hardware constraints for alignment,
like queue heads needing to be aligned on N byte boundaries.
-Create a pci_pool like this:
+Create a dma_pool like this:
- struct pci_pool *pool;
+ struct dma_pool *pool;
- pool = pci_pool_create(name, pdev, size, align, alloc);
+ pool = dma_pool_create(name, dev, size, align, alloc);
-The "name" is for diagnostics (like a kmem_cache name); pdev and size
+The "name" is for diagnostics (like a kmem_cache name); dev and size
are as above. The device's hardware alignment requirement for this
type of data is "align" (which is expressed in bytes, and must be a
power of two). If your device has no boundary crossing restrictions,
pass 0 for alloc; passing 4096 says memory allocated from this pool
must not cross 4KByte boundaries (but at that time it may be better to
-go for pci_alloc_consistent directly instead).
+go for dma_alloc_coherent directly instead).
-Allocate memory from a pci pool like this:
+Allocate memory from a dma pool like this:
- cpu_addr = pci_pool_alloc(pool, flags, &dma_handle);
+ cpu_addr = dma_pool_alloc(pool, flags, &dma_handle);
flags are SLAB_KERNEL if blocking is permitted (not in_interrupt nor
-holding SMP locks), SLAB_ATOMIC otherwise. Like pci_alloc_consistent,
+holding SMP locks), SLAB_ATOMIC otherwise. Like dma_alloc_coherent,
this returns two values, cpu_addr and dma_handle.
-Free memory that was allocated from a pci_pool like this:
+Free memory that was allocated from a dma_pool like this:
- pci_pool_free(pool, cpu_addr, dma_handle);
+ dma_pool_free(pool, cpu_addr, dma_handle);
-where pool is what you passed to pci_pool_alloc, and cpu_addr and
-dma_handle are the values pci_pool_alloc returned. This function
+where pool is what you passed to dma_pool_alloc, and cpu_addr and
+dma_handle are the values dma_pool_alloc returned. This function
may be called in interrupt context.
-Destroy a pci_pool by calling:
+Destroy a dma_pool by calling:
- pci_pool_destroy(pool);
+ dma_pool_destroy(pool);
-Make sure you've called pci_pool_free for all memory allocated
+Make sure you've called dma_pool_free for all memory allocated
from a pool before you destroy the pool. This function may not
be called in interrupt context.
@@ -411,15 +406,15 @@ The interfaces described in subsequent portions of this document
take a DMA direction argument, which is an integer and takes on
one of the following values:
- PCI_DMA_BIDIRECTIONAL
- PCI_DMA_TODEVICE
- PCI_DMA_FROMDEVICE
- PCI_DMA_NONE
+ DMA_BIDIRECTIONAL
+ DMA_TO_DEVICE
+ DMA_FROM_DEVICE
+ DMA_NONE
One should provide the exact DMA direction if you know it.
-PCI_DMA_TODEVICE means "from main memory to the PCI device"
-PCI_DMA_FROMDEVICE means "from the PCI device to main memory"
+DMA_TO_DEVICE means "from main memory to the device"
+DMA_FROM_DEVICE means "from the device to main memory"
It is the direction in which the data moves during the DMA
transfer.
@@ -427,12 +422,12 @@ You are _strongly_ encouraged to specify this as precisely
as you possibly can.
If you absolutely cannot know the direction of the DMA transfer,
-specify PCI_DMA_BIDIRECTIONAL. It means that the DMA can go in
+specify DMA_BIDIRECTIONAL. It means that the DMA can go in
either direction. The platform guarantees that you may legally
specify this, and that it will work, but this may be at the
cost of performance for example.
-The value PCI_DMA_NONE is to be used for debugging. One can
+The value DMA_NONE is to be used for debugging. One can
hold this in a data structure before you come to know the
precise direction, and this will help catch cases where your
direction tracking logic has failed to set things up properly.
@@ -442,21 +437,21 @@ potential platform-specific optimizations of such) is for debugging.
Some platforms actually have a write permission boolean which DMA
mappings can be marked with, much like page protections in the user
program address space. Such platforms can and do report errors in the
-kernel logs when the PCI controller hardware detects violation of the
+kernel logs when the DMA controller hardware detects violation of the
permission setting.
Only streaming mappings specify a direction, consistent mappings
implicitly have a direction attribute setting of
-PCI_DMA_BIDIRECTIONAL.
+DMA_BIDIRECTIONAL.
The SCSI subsystem tells you the direction to use in the
'sc_data_direction' member of the SCSI command your driver is
working on.
For Networking drivers, it's a rather simple affair. For transmit
-packets, map/unmap them with the PCI_DMA_TODEVICE direction
+packets, map/unmap them with the DMA_TO_DEVICE direction
specifier. For receive packets, just the opposite, map/unmap them
-with the PCI_DMA_FROMDEVICE direction specifier.
+with the DMA_FROM_DEVICE direction specifier.
Using Streaming DMA mappings
@@ -467,43 +462,43 @@ scatterlist.
To map a single region, you do:
- struct pci_dev *pdev = mydev->pdev;
+ struct device *dev = &my_dev->dev;
dma_addr_t dma_handle;
void *addr = buffer->ptr;
size_t size = buffer->len;
- dma_handle = pci_map_single(pdev, addr, size, direction);
+ dma_handle = dma_map_single(dev, addr, size, direction);
and to unmap it:
- pci_unmap_single(pdev, dma_handle, size, direction);
+ dma_unmap_single(dev, dma_handle, size, direction);
-You should call pci_unmap_single when the DMA activity is finished, e.g.
+You should call dma_unmap_single when the DMA activity is finished, e.g.
from the interrupt which told you that the DMA transfer is done.
Using cpu pointers like this for single mappings has a disadvantage,
you cannot reference HIGHMEM memory in this way. Thus, there is a
-map/unmap interface pair akin to pci_{map,unmap}_single. These
+map/unmap interface pair akin to dma_{map,unmap}_single. These
interfaces deal with page/offset pairs instead of cpu pointers.
Specifically:
- struct pci_dev *pdev = mydev->pdev;
+ struct device *dev = &my_dev->dev;
dma_addr_t dma_handle;
struct page *page = buffer->page;
unsigned long offset = buffer->offset;
size_t size = buffer->len;
- dma_handle = pci_map_page(pdev, page, offset, size, direction);
+ dma_handle = dma_map_page(dev, page, offset, size, direction);
...
- pci_unmap_page(pdev, dma_handle, size, direction);
+ dma_unmap_page(dev, dma_handle, size, direction);
Here, "offset" means byte offset within the given page.
With scatterlists, you map a region gathered from several regions by:
- int i, count = pci_map_sg(pdev, sglist, nents, direction);
+ int i, count = dma_map_sg(dev, sglist, nents, direction);
struct scatterlist *sg;
for_each_sg(sglist, sg, count, i) {
@@ -527,16 +522,16 @@ accessed sg->address and sg->length as shown above.
To unmap a scatterlist, just call:
- pci_unmap_sg(pdev, sglist, nents, direction);
+ dma_unmap_sg(dev, sglist, nents, direction);
Again, make sure DMA activity has already finished.
-PLEASE NOTE: The 'nents' argument to the pci_unmap_sg call must be
- the _same_ one you passed into the pci_map_sg call,
+PLEASE NOTE: The 'nents' argument to the dma_unmap_sg call must be
+ the _same_ one you passed into the dma_map_sg call,
it should _NOT_ be the 'count' value _returned_ from the
- pci_map_sg call.
+ dma_map_sg call.
-Every pci_map_{single,sg} call should have its pci_unmap_{single,sg}
+Every dma_map_{single,sg} call should have its dma_unmap_{single,sg}
counterpart, because the bus address space is a shared resource (although
in some ports the mapping is per each BUS so less devices contend for the
same bus address space) and you could render the machine unusable by eating
@@ -547,14 +542,14 @@ the data in between the DMA transfers, the buffer needs to be synced
properly in order for the cpu and device to see the most uptodate and
correct copy of the DMA buffer.
-So, firstly, just map it with pci_map_{single,sg}, and after each DMA
+So, firstly, just map it with dma_map_{single,sg}, and after each DMA
transfer call either:
- pci_dma_sync_single_for_cpu(pdev, dma_handle, size, direction);
+ dma_sync_single_for_cpu(dev, dma_handle, size, direction);
or:
- pci_dma_sync_sg_for_cpu(pdev, sglist, nents, direction);
+ dma_sync_sg_for_cpu(dev, sglist, nents, direction);
as appropriate.
@@ -562,27 +557,27 @@ Then, if you wish to let the device get at the DMA area again,
finish accessing the data with the cpu, and then before actually
giving the buffer to the hardware call either:
- pci_dma_sync_single_for_device(pdev, dma_handle, size, direction);
+ dma_sync_single_for_device(dev, dma_handle, size, direction);
or:
- pci_dma_sync_sg_for_device(dev, sglist, nents, direction);
+ dma_sync_sg_for_device(dev, sglist, nents, direction);
as appropriate.
After the last DMA transfer call one of the DMA unmap routines
-pci_unmap_{single,sg}. If you don't touch the data from the first pci_map_*
-call till pci_unmap_*, then you don't have to call the pci_dma_sync_*
+dma_unmap_{single,sg}. If you don't touch the data from the first dma_map_*
+call till dma_unmap_*, then you don't have to call the dma_sync_*
routines at all.
Here is pseudo code which shows a situation in which you would need
-to use the pci_dma_sync_*() interfaces.
+to use the dma_sync_*() interfaces.
my_card_setup_receive_buffer(struct my_card *cp, char *buffer, int len)
{
dma_addr_t mapping;
- mapping = pci_map_single(cp->pdev, buffer, len, PCI_DMA_FROMDEVICE);
+ mapping = dma_map_single(cp->dev, buffer, len, DMA_FROM_DEVICE);
cp->rx_buf = buffer;
cp->rx_len = len;
@@ -606,25 +601,25 @@ to use the pci_dma_sync_*() interfaces.
* the DMA transfer with the CPU first
* so that we see updated contents.
*/
- pci_dma_sync_single_for_cpu(cp->pdev, cp->rx_dma,
- cp->rx_len,
- PCI_DMA_FROMDEVICE);
+ dma_sync_single_for_cpu(&cp->dev, cp->rx_dma,
+ cp->rx_len,
+ DMA_FROM_DEVICE);
/* Now it is safe to examine the buffer. */
hp = (struct my_card_header *) cp->rx_buf;
if (header_is_ok(hp)) {
- pci_unmap_single(cp->pdev, cp->rx_dma, cp->rx_len,
- PCI_DMA_FROMDEVICE);
+ dma_unmap_single(&cp->dev, cp->rx_dma, cp->rx_len,
+ DMA_FROM_DEVICE);
pass_to_upper_layers(cp->rx_buf);
make_and_setup_new_rx_buf(cp);
} else {
/* Just sync the buffer and give it back
* to the card.
*/
- pci_dma_sync_single_for_device(cp->pdev,
- cp->rx_dma,
- cp->rx_len,
- PCI_DMA_FROMDEVICE);
+ dma_sync_single_for_device(&cp->dev,
+ cp->rx_dma,
+ cp->rx_len,
+ DMA_FROM_DEVICE);
give_rx_buf_to_card(cp);
}
}
@@ -634,19 +629,49 @@ Drivers converted fully to this interface should not use virt_to_bus any
longer, nor should they use bus_to_virt. Some drivers have to be changed a
little bit, because there is no longer an equivalent to bus_to_virt in the
dynamic DMA mapping scheme - you have to always store the DMA addresses
-returned by the pci_alloc_consistent, pci_pool_alloc, and pci_map_single
-calls (pci_map_sg stores them in the scatterlist itself if the platform
+returned by the dma_alloc_coherent, dma_pool_alloc, and dma_map_single
+calls (dma_map_sg stores them in the scatterlist itself if the platform
supports dynamic DMA mapping in hardware) in your driver structures and/or
in the card registers.
-All PCI drivers should be using these interfaces with no exceptions.
-It is planned to completely remove virt_to_bus() and bus_to_virt() as
+All drivers should be using these interfaces with no exceptions. It
+is planned to completely remove virt_to_bus() and bus_to_virt() as
they are entirely deprecated. Some ports already do not provide these
as it is impossible to correctly support them.
+ Handling Errors
+
+DMA address space is limited on some architectures and an allocation
+failure can be determined by:
+
+- checking if dma_alloc_coherent returns NULL or dma_map_sg returns 0
+
+- checking the returned dma_addr_t of dma_map_single and dma_map_page
+ by using dma_mapping_error():
+
+ dma_addr_t dma_handle;
+
+ dma_handle = dma_map_single(dev, addr, size, direction);
+ if (dma_mapping_error(dev, dma_handle)) {
+ /*
+ * reduce current DMA mapping usage,
+ * delay and try again later or
+ * reset driver.
+ */
+ }
+
+Networking drivers must call dev_kfree_skb to free the socket buffer
+and return NETDEV_TX_OK if the DMA mapping fails on the transmit hook
+(ndo_start_xmit). This means that the socket buffer is just dropped in
+the failure case.
+
+SCSI drivers must return SCSI_MLQUEUE_HOST_BUSY if the DMA mapping
+fails in the queuecommand hook. This means that the SCSI subsystem
+passes the command to the driver again later.
+
Optimizing Unmap State Space Consumption
-On many platforms, pci_unmap_{single,page}() is simply a nop.
+On many platforms, dma_unmap_{single,page}() is simply a nop.
Therefore, keeping track of the mapping address and length is a waste
of space. Instead of filling your drivers up with ifdefs and the like
to "work around" this (which would defeat the whole purpose of a
@@ -655,7 +680,7 @@ portable API) the following facilities are provided.
Actually, instead of describing the macros one by one, we'll
transform some example code.
-1) Use DECLARE_PCI_UNMAP_{ADDR,LEN} in state saving structures.
+1) Use DEFINE_DMA_UNMAP_{ADDR,LEN} in state saving structures.
Example, before:
struct ring_state {
@@ -668,14 +693,11 @@ transform some example code.
struct ring_state {
struct sk_buff *skb;
- DECLARE_PCI_UNMAP_ADDR(mapping)
- DECLARE_PCI_UNMAP_LEN(len)
+ DEFINE_DMA_UNMAP_ADDR(mapping);
+ DEFINE_DMA_UNMAP_LEN(len);
};
- NOTE: DO NOT put a semicolon at the end of the DECLARE_*()
- macro.
-
-2) Use pci_unmap_{addr,len}_set to set these values.
+2) Use dma_unmap_{addr,len}_set to set these values.
Example, before:
ringp->mapping = FOO;
@@ -683,21 +705,21 @@ transform some example code.
after:
- pci_unmap_addr_set(ringp, mapping, FOO);
- pci_unmap_len_set(ringp, len, BAR);
+ dma_unmap_addr_set(ringp, mapping, FOO);
+ dma_unmap_len_set(ringp, len, BAR);
-3) Use pci_unmap_{addr,len} to access these values.
+3) Use dma_unmap_{addr,len} to access these values.
Example, before:
- pci_unmap_single(pdev, ringp->mapping, ringp->len,
- PCI_DMA_FROMDEVICE);
+ dma_unmap_single(dev, ringp->mapping, ringp->len,
+ DMA_FROM_DEVICE);
after:
- pci_unmap_single(pdev,
- pci_unmap_addr(ringp, mapping),
- pci_unmap_len(ringp, len),
- PCI_DMA_FROMDEVICE);
+ dma_unmap_single(dev,
+ dma_unmap_addr(ringp, mapping),
+ dma_unmap_len(ringp, len),
+ DMA_FROM_DEVICE);
It really should be self-explanatory. We treat the ADDR and LEN
separately, because it is possible for an implementation to only
@@ -711,46 +733,39 @@ to "Closing".
1) Struct scatterlist requirements.
- Struct scatterlist must contain, at a minimum, the following
- members:
-
- struct page *page;
- unsigned int offset;
- unsigned int length;
+ Don't invent the architecture specific struct scatterlist; just use
+ <asm-generic/scatterlist.h>. You need to enable
+ CONFIG_NEED_SG_DMA_LENGTH if the architecture supports IOMMUs
+ (including software IOMMU).
- The base address is specified by a "page+offset" pair.
+2) ARCH_DMA_MINALIGN
- Previous versions of struct scatterlist contained a "void *address"
- field that was sometimes used instead of page+offset. As of Linux
- 2.5., page+offset is always used, and the "address" field has been
- deleted.
+ Architectures must ensure that kmalloc'ed buffer is
+ DMA-safe. Drivers and subsystems depend on it. If an architecture
+ isn't fully DMA-coherent (i.e. hardware doesn't ensure that data in
+ the CPU cache is identical to data in main memory),
+ ARCH_DMA_MINALIGN must be set so that the memory allocator
+ makes sure that kmalloc'ed buffer doesn't share a cache line with
+ the others. See arch/arm/include/asm/cache.h as an example.
-2) More to come...
-
- Handling Errors
-
-DMA address space is limited on some architectures and an allocation
-failure can be determined by:
+ Note that ARCH_DMA_MINALIGN is about DMA memory alignment
+ constraints. You don't need to worry about the architecture data
+ alignment constraints (e.g. the alignment constraints about 64-bit
+ objects).
-- checking if pci_alloc_consistent returns NULL or pci_map_sg returns 0
+3) Supporting multiple types of IOMMUs
-- checking the returned dma_addr_t of pci_map_single and pci_map_page
- by using pci_dma_mapping_error():
-
- dma_addr_t dma_handle;
-
- dma_handle = pci_map_single(pdev, addr, size, direction);
- if (pci_dma_mapping_error(pdev, dma_handle)) {
- /*
- * reduce current DMA mapping usage,
- * delay and try again later or
- * reset driver.
- */
- }
+ If your architecture needs to support multiple types of IOMMUs, you
+ can use include/linux/asm-generic/dma-mapping-common.h. It's a
+ library to support the DMA API with multiple types of IOMMUs. Lots
+ of architectures (x86, powerpc, sh, alpha, ia64, microblaze and
+ sparc) use it. Choose one to see how it can be used. If you need to
+ support multiple types of IOMMUs in a single system, the example of
+ x86 or powerpc helps.
Closing
-This document, and the API itself, would not be in it's current
+This document, and the API itself, would not be in its current
form without the feedback and suggestions from numerous individuals.
We would like to specifically mention, in no particular order, the
following people:
diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index 5aceb88b3f8..fe232690661 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -4,20 +4,18 @@
James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
This document describes the DMA API. For a more gentle introduction
-phrased in terms of the pci_ equivalents (and actual examples) see
-Documentation/PCI/PCI-DMA-mapping.txt.
+of the API (and actual examples) see
+Documentation/DMA-API-HOWTO.txt.
-This API is split into two pieces. Part I describes the API and the
-corresponding pci_ API. Part II describes the extensions to the API
-for supporting non-consistent memory machines. Unless you know that
-your driver absolutely has to support non-consistent platforms (this
-is usually only legacy platforms) you should only use the API
-described in part I.
+This API is split into two pieces. Part I describes the API. Part II
+describes the extensions to the API for supporting non-consistent
+memory machines. Unless you know that your driver absolutely has to
+support non-consistent platforms (this is usually only legacy
+platforms) you should only use the API described in part I.
-Part I - pci_ and dma_ Equivalent API
+Part I - dma_ API
-------------------------------------
-To get the pci_ API, you must #include <linux/pci.h>
To get the dma_ API, you must #include <linux/dma-mapping.h>
@@ -27,9 +25,6 @@ Part Ia - Using large dma-coherent buffers
void *
dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag)
-void *
-pci_alloc_consistent(struct pci_dev *dev, size_t size,
- dma_addr_t *dma_handle)
Consistent memory is memory for which a write by either the device or
the processor can immediately be read by the processor or device
@@ -53,15 +48,11 @@ The simplest way to do that is to use the dma_pool calls (see below).
The flag parameter (dma_alloc_coherent only) allows the caller to
specify the GFP_ flags (see kmalloc) for the allocation (the
implementation may choose to ignore flags that affect the location of
-the returned memory, like GFP_DMA). For pci_alloc_consistent, you
-must assume GFP_ATOMIC behaviour.
+the returned memory, like GFP_DMA).
void
dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
dma_addr_t dma_handle)
-void
-pci_free_consistent(struct pci_dev *dev, size_t size, void *cpu_addr,
- dma_addr_t dma_handle)
Free the region of consistent memory you previously allocated. dev,
size and dma_handle must all be the same as those passed into the
@@ -89,10 +80,6 @@ for alignment, like queue heads needing to be aligned on N-byte boundaries.
dma_pool_create(const char *name, struct device *dev,
size_t size, size_t align, size_t alloc);
- struct pci_pool *
- pci_pool_create(const char *name, struct pci_device *dev,
- size_t size, size_t align, size_t alloc);
-
The pool create() routines initialize a pool of dma-coherent buffers
for use with a given device. It must be called in a context which
can sleep.
@@ -108,9 +95,6 @@ from this pool must not cross 4KByte boundaries.
void *dma_pool_alloc(struct dma_pool *pool, gfp_t gfp_flags,
dma_addr_t *dma_handle);
- void *pci_pool_alloc(struct pci_pool *pool, gfp_t gfp_flags,
- dma_addr_t *dma_handle);
-
This allocates memory from the pool; the returned memory will meet the size
and alignment requirements specified at creation time. Pass GFP_ATOMIC to
prevent blocking, or if it's permitted (not in_interrupt, not holding SMP locks),
@@ -122,9 +106,6 @@ pool's device.
void dma_pool_free(struct dma_pool *pool, void *vaddr,
dma_addr_t addr);
- void pci_pool_free(struct pci_pool *pool, void *vaddr,
- dma_addr_t addr);
-
This puts memory back into the pool. The pool is what was passed to
the pool allocation routine; the cpu (vaddr) and dma addresses are what
were returned when that routine allocated the memory being freed.
@@ -132,8 +113,6 @@ were returned when that routine allocated the memory being freed.
void dma_pool_destroy(struct dma_pool *pool);
- void pci_pool_destroy(struct pci_pool *pool);
-
The pool destroy() routines free the resources of the pool. They must be
called in a context which can sleep. Make sure you've freed all allocated
memory back to the pool before you destroy it.
@@ -144,8 +123,6 @@ Part Ic - DMA addressing limitations
int
dma_supported(struct device *dev, u64 mask)
-int
-pci_dma_supported(struct pci_dev *hwdev, u64 mask)
Checks to see if the device can support DMA to the memory described by
mask.
@@ -159,8 +136,14 @@ driver writers.
int
dma_set_mask(struct device *dev, u64 mask)
+
+Checks to see if the mask is possible and updates the device
+parameters if it is.
+
+Returns: 0 if successful and a negative error if not.
+
int
-pci_set_dma_mask(struct pci_device *dev, u64 mask)
+dma_set_coherent_mask(struct device *dev, u64 mask)
Checks to see if the mask is possible and updates the device
parameters if it is.
@@ -187,9 +170,6 @@ Part Id - Streaming DMA mappings
dma_addr_t
dma_map_single(struct device *dev, void *cpu_addr, size_t size,
enum dma_data_direction direction)
-dma_addr_t
-pci_map_single(struct pci_dev *hwdev, void *cpu_addr, size_t size,
- int direction)
Maps a piece of processor virtual memory so it can be accessed by the
device and returns the physical handle of the memory.
@@ -198,14 +178,10 @@ The direction for both api's may be converted freely by casting.
However the dma_ API uses a strongly typed enumerator for its
direction:
-DMA_NONE = PCI_DMA_NONE no direction (used for
- debugging)
-DMA_TO_DEVICE = PCI_DMA_TODEVICE data is going from the
- memory to the device
-DMA_FROM_DEVICE = PCI_DMA_FROMDEVICE data is coming from
- the device to the
- memory
-DMA_BIDIRECTIONAL = PCI_DMA_BIDIRECTIONAL direction isn't known
+DMA_NONE no direction (used for debugging)
+DMA_TO_DEVICE data is going from the memory to the device
+DMA_FROM_DEVICE data is coming from the device to the memory
+DMA_BIDIRECTIONAL direction isn't known
Notes: Not all memory regions in a machine can be mapped by this
API. Further, regions that appear to be physically contiguous in
@@ -268,9 +244,6 @@ cache lines are updated with data that the device may have changed).
void
dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
enum dma_data_direction direction)
-void
-pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
- size_t size, int direction)
Unmaps the region previously mapped. All the parameters passed in
must be identical to those passed in (and returned) by the mapping
@@ -280,15 +253,9 @@ dma_addr_t
dma_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size,
enum dma_data_direction direction)
-dma_addr_t
-pci_map_page(struct pci_dev *hwdev, struct page *page,
- unsigned long offset, size_t size, int direction)
void
dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
enum dma_data_direction direction)
-void
-pci_unmap_page(struct pci_dev *hwdev, dma_addr_t dma_address,
- size_t size, int direction)
API for mapping and unmapping for pages. All the notes and warnings
for the other mapping APIs apply here. Also, although the <offset>
@@ -299,9 +266,6 @@ cache width is.
int
dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-int
-pci_dma_mapping_error(struct pci_dev *hwdev, dma_addr_t dma_addr)
-
In some circumstances dma_map_single and dma_map_page will fail to create
a mapping. A driver can check for these errors by testing the returned
dma address with dma_mapping_error(). A non-zero return value means the mapping
@@ -311,9 +275,6 @@ reduce current DMA mapping usage or delay and try again later).
int
dma_map_sg(struct device *dev, struct scatterlist *sg,
int nents, enum dma_data_direction direction)
- int
- pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
- int nents, int direction)
Returns: the number of physical segments mapped (this may be shorter
than <nents> passed in if some elements of the scatter/gather list are
@@ -353,9 +314,6 @@ accessed sg->address and sg->length as shown above.
void
dma_unmap_sg(struct device *dev, struct scatterlist *sg,
int nhwentries, enum dma_data_direction direction)
- void
- pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg,
- int nents, int direction)
Unmap the previously mapped scatter/gather list. All the parameters
must be the same as those and passed in to the scatter/gather mapping
@@ -365,21 +323,23 @@ Note: <nents> must be the number you passed in, *not* the number of
physical entries returned.
void
-dma_sync_single(struct device *dev, dma_addr_t dma_handle, size_t size,
- enum dma_data_direction direction)
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
+ enum dma_data_direction direction)
void
-pci_dma_sync_single(struct pci_dev *hwdev, dma_addr_t dma_handle,
- size_t size, int direction)
+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
+ enum dma_data_direction direction)
void
-dma_sync_sg(struct device *dev, struct scatterlist *sg, int nelems,
- enum dma_data_direction direction)
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+ enum dma_data_direction direction)
void
-pci_dma_sync_sg(struct pci_dev *hwdev, struct scatterlist *sg,
- int nelems, int direction)
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
+ enum dma_data_direction direction)
-Synchronise a single contiguous or scatter/gather mapping. All the
-parameters must be the same as those passed into the single mapping
-API.
+Synchronise a single contiguous or scatter/gather mapping for the cpu
+and device. With the sync_sg API, all the parameters must be the same
+as those passed into the single mapping API. With the sync_single API,
+you can use dma_handle and size parameters that aren't identical to
+those passed into the single mapping API to do a partial sync.
Notes: You must do this:
@@ -461,9 +421,9 @@ void whizco_dma_map_sg_attrs(struct device *dev, dma_addr_t dma_addr,
Part II - Advanced dma_ usage
-----------------------------
-Warning: These pieces of the DMA API have no PCI equivalent. They
-should also not be used in the majority of cases, since they cater for
-unlikely corner cases that don't belong in usual drivers.
+Warning: These pieces of the DMA API should not be used in the
+majority of cases, since they cater for unlikely corner cases that
+don't belong in usual drivers.
If you don't understand how cache line coherency works between a
processor and an I/O device, you should not be using this part of the
@@ -496,12 +456,6 @@ be identical to those passed in (and returned by
dma_alloc_noncoherent()).
int
-dma_is_consistent(struct device *dev, dma_addr_t dma_handle)
-
-Returns true if the device dev is performing consistent DMA on the memory
-area pointed to by the dma_handle.
-
-int
dma_get_cache_alignment(void)
Returns the processor cache alignment. This is the absolute minimum
@@ -514,16 +468,6 @@ into the width returned by this call. It will also always be a power
of two for easy alignment.
void
-dma_sync_single_range(struct device *dev, dma_addr_t dma_handle,
- unsigned long offset, size_t size,
- enum dma_data_direction direction)
-
-Does a partial sync, starting at offset and continuing for size. You
-must be careful to observe the cache alignment and width when doing
-anything like this. You must also be extra careful about accessing
-memory you intend to sync partially.
-
-void
dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction)
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 325cfd1d6d9..34929f24c28 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -14,7 +14,7 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
mac80211.xml debugobjects.xml sh.xml regulator.xml \
alsa-driver-api.xml writing-an-alsa-driver.xml \
- tracepoint.xml media.xml
+ tracepoint.xml media.xml drm.xml
###
# The build process is as follows (targets):
@@ -35,7 +35,7 @@ PS_METHOD = $(prefer-db2x)
PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs xmldoclinks
BOOKS := $(addprefix $(obj)/,$(DOCBOOKS))
-xmldocs: $(BOOKS) xmldoclinks
+xmldocs: $(BOOKS)
sgmldocs: xmldocs
PS := $(patsubst %.xml, %.ps, $(BOOKS))
@@ -45,7 +45,7 @@ PDF := $(patsubst %.xml, %.pdf, $(BOOKS))
pdfdocs: $(PDF)
HTML := $(sort $(patsubst %.xml, %.html, $(BOOKS)))
-htmldocs: $(HTML)
+htmldocs: $(HTML) xmldoclinks
$(call build_main_index)
$(call build_images)
@@ -95,7 +95,7 @@ define rule_docproc
) > $(dir $@).$(notdir $@).cmd
endef
-%.xml: %.tmpl FORCE
+%.xml: %.tmpl xmldoclinks FORCE
$(call if_changed_rule,docproc)
###
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index f9a6e2c75f1..feca0758391 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -45,8 +45,7 @@
</sect1>
<sect1><title>Atomic and pointer manipulation</title>
-!Iarch/x86/include/asm/atomic_32.h
-!Iarch/x86/include/asm/unaligned.h
+!Iarch/x86/include/asm/atomic.h
</sect1>
<sect1><title>Delaying, scheduling, and timer routines</title>
@@ -111,6 +110,7 @@ X!Edrivers/base/attribute_container.c
<!--
X!Edrivers/base/interface.c
-->
+!Iinclude/linux/platform_device.h
!Edrivers/base/platform.c
!Edrivers/base/bus.c
</sect1>
diff --git a/Documentation/DocBook/deviceiobook.tmpl b/Documentation/DocBook/deviceiobook.tmpl
index 3ed88126ab8..c1ed6a49e59 100644
--- a/Documentation/DocBook/deviceiobook.tmpl
+++ b/Documentation/DocBook/deviceiobook.tmpl
@@ -316,7 +316,7 @@ CPU B: spin_unlock_irqrestore(&amp;dev_lock, flags)
<chapter id="pubfunctions">
<title>Public Functions Provided</title>
-!Iarch/x86/include/asm/io_32.h
+!Iarch/x86/include/asm/io.h
!Elib/iomap.c
</chapter>
diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
new file mode 100644
index 00000000000..910c923a9b8
--- /dev/null
+++ b/Documentation/DocBook/drm.tmpl
@@ -0,0 +1,839 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+ "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="drmDevelopersGuide">
+ <bookinfo>
+ <title>Linux DRM Developer's Guide</title>
+
+ <copyright>
+ <year>2008-2009</year>
+ <holder>
+ Intel Corporation (Jesse Barnes &lt;jesse.barnes@intel.com&gt;)
+ </holder>
+ </copyright>
+
+ <legalnotice>
+ <para>
+ The contents of this file may be used under the terms of the GNU
+ General Public License version 2 (the "GPL") as distributed in
+ the kernel source COPYING file.
+ </para>
+ </legalnotice>
+ </bookinfo>
+
+<toc></toc>
+
+ <!-- Introduction -->
+
+ <chapter id="drmIntroduction">
+ <title>Introduction</title>
+ <para>
+ The Linux DRM layer contains code intended to support the needs
+ of complex graphics devices, usually containing programmable
+ pipelines well suited to 3D graphics acceleration. Graphics
+ drivers in the kernel can make use of DRM functions to make
+ tasks like memory management, interrupt handling and DMA easier,
+ and provide a uniform interface to applications.
+ </para>
+ <para>
+ A note on versions: this guide covers features found in the DRM
+ tree, including the TTM memory manager, output configuration and
+ mode setting, and the new vblank internals, in addition to all
+ the regular features found in current kernels.
+ </para>
+ <para>
+ [Insert diagram of typical DRM stack here]
+ </para>
+ </chapter>
+
+ <!-- Internals -->
+
+ <chapter id="drmInternals">
+ <title>DRM Internals</title>
+ <para>
+ This chapter documents DRM internals relevant to driver authors
+ and developers working to add support for the latest features to
+ existing drivers.
+ </para>
+ <para>
+ First, we'll go over some typical driver initialization
+ requirements, like setting up command buffers, creating an
+ initial output configuration, and initializing core services.
+ Subsequent sections will cover core internals in more detail,
+ providing implementation notes and examples.
+ </para>
+ <para>
+ The DRM layer provides several services to graphics drivers,
+ many of them driven by the application interfaces it provides
+ through libdrm, the library that wraps most of the DRM ioctls.
+ These include vblank event handling, memory
+ management, output management, framebuffer management, command
+ submission &amp; fencing, suspend/resume support, and DMA
+ services.
+ </para>
+ <para>
+ The core of every DRM driver is struct drm_device. Drivers
+ will typically statically initialize a drm_device structure,
+ then pass it to drm_init() at load time.
+ </para>
+
+ <!-- Internals: driver init -->
+
+ <sect1>
+ <title>Driver initialization</title>
+ <para>
+ Before calling the DRM initialization routines, the driver must
+ first create and fill out a struct drm_device structure.
+ </para>
+ <programlisting>
+ static struct drm_driver driver = {
+ /* don't use mtrr's here, the Xserver or user space app should
+ * deal with them for intel hardware.
+ */
+ .driver_features =
+ DRIVER_USE_AGP | DRIVER_REQUIRE_AGP |
+ DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_MODESET,
+ .load = i915_driver_load,
+ .unload = i915_driver_unload,
+ .firstopen = i915_driver_firstopen,
+ .lastclose = i915_driver_lastclose,
+ .preclose = i915_driver_preclose,
+ .save = i915_save,
+ .restore = i915_restore,
+ .device_is_agp = i915_driver_device_is_agp,
+ .get_vblank_counter = i915_get_vblank_counter,
+ .enable_vblank = i915_enable_vblank,
+ .disable_vblank = i915_disable_vblank,
+ .irq_preinstall = i915_driver_irq_preinstall,
+ .irq_postinstall = i915_driver_irq_postinstall,
+ .irq_uninstall = i915_driver_irq_uninstall,
+ .irq_handler = i915_driver_irq_handler,
+ .reclaim_buffers = drm_core_reclaim_buffers,
+ .get_map_ofs = drm_core_get_map_ofs,
+ .get_reg_ofs = drm_core_get_reg_ofs,
+ .fb_probe = intelfb_probe,
+ .fb_remove = intelfb_remove,
+ .fb_resize = intelfb_resize,
+ .master_create = i915_master_create,
+ .master_destroy = i915_master_destroy,
+#if defined(CONFIG_DEBUG_FS)
+ .debugfs_init = i915_debugfs_init,
+ .debugfs_cleanup = i915_debugfs_cleanup,
+#endif
+ .gem_init_object = i915_gem_init_object,
+ .gem_free_object = i915_gem_free_object,
+ .gem_vm_ops = &amp;i915_gem_vm_ops,
+ .ioctls = i915_ioctls,
+ .fops = {
+ .owner = THIS_MODULE,
+ .open = drm_open,
+ .release = drm_release,
+ .ioctl = drm_ioctl,
+ .mmap = drm_mmap,
+ .poll = drm_poll,
+ .fasync = drm_fasync,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = i915_compat_ioctl,
+#endif
+ },
+ .pci_driver = {
+ .name = DRIVER_NAME,
+ .id_table = pciidlist,
+ .probe = probe,
+ .remove = __devexit_p(drm_cleanup_pci),
+ },
+ .name = DRIVER_NAME,
+ .desc = DRIVER_DESC,
+ .date = DRIVER_DATE,
+ .major = DRIVER_MAJOR,
+ .minor = DRIVER_MINOR,
+ .patchlevel = DRIVER_PATCHLEVEL,
+ };
+ </programlisting>
+ <para>
+ In the example above, taken from the i915 DRM driver, the driver
+ sets several flags indicating what core features it supports.
+ We'll go over the individual callbacks in later sections. Since
+ flags indicate which features your driver supports to the DRM
+ core, you need to set most of them prior to calling drm_init(). Some,
+ like DRIVER_MODESET can be set later based on user supplied parameters,
+ but that's the exception rather than the rule.
+ </para>
+ <variablelist>
+ <title>Driver flags</title>
+ <varlistentry>
+ <term>DRIVER_USE_AGP</term>
+ <listitem><para>
+ Driver uses AGP interface
+ </para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>DRIVER_REQUIRE_AGP</term>
+ <listitem><para>
+ Driver needs AGP interface to function.
+ </para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>DRIVER_USE_MTRR</term>
+ <listitem>
+ <para>
+ Driver uses MTRR interface for mapping memory. Deprecated.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>DRIVER_PCI_DMA</term>
+ <listitem><para>
+ Driver is capable of PCI DMA. Deprecated.
+ </para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>DRIVER_SG</term>
+ <listitem><para>
+ Driver can perform scatter/gather DMA. Deprecated.
+ </para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>DRIVER_HAVE_DMA</term>
+ <listitem><para>Driver supports DMA. Deprecated.</para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>DRIVER_HAVE_IRQ</term><term>DRIVER_IRQ_SHARED</term>
+ <listitem>
+ <para>
+ DRIVER_HAVE_IRQ indicates whether the driver has a IRQ
+ handler, DRIVER_IRQ_SHARED indicates whether the device &amp;
+ handler support shared IRQs (note that this is required of
+ PCI drivers).
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>DRIVER_DMA_QUEUE</term>
+ <listitem>
+ <para>
+ If the driver queues DMA requests and completes them
+ asynchronously, this flag should be set. Deprecated.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>DRIVER_FB_DMA</term>
+ <listitem>
+ <para>
+ Driver supports DMA to/from the framebuffer. Deprecated.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>DRIVER_MODESET</term>
+ <listitem>
+ <para>
+ Driver supports mode setting interfaces.
+ </para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ <para>
+ In this specific case, the driver requires AGP and supports
+ IRQs. DMA, as we'll see, is handled by device specific ioctls
+ in this case. It also supports the kernel mode setting APIs, though
+ unlike in the actual i915 driver source, this example unconditionally
+ exports KMS capability.
+ </para>
+ </sect1>
+
+ <!-- Internals: driver load -->
+
+ <sect1>
+ <title>Driver load</title>
+ <para>
+ In the previous section, we saw what a typical drm_driver
+ structure might look like. One of the more important fields in
+ the structure is the hook for the load function.
+ </para>
+ <programlisting>
+ static struct drm_driver driver = {
+ ...
+ .load = i915_driver_load,
+ ...
+ };
+ </programlisting>
+ <para>
+ The load function has many responsibilities: allocating a driver
+ private structure, specifying supported performance counters,
+ configuring the device (e.g. mapping registers &amp; command
+ buffers), initializing the memory manager, and setting up the
+ initial output configuration.
+ </para>
+ <para>
+ Note that the tasks performed at driver load time must not
+ conflict with DRM client requirements. For instance, if user
+ level mode setting drivers are in use, it would be problematic
+ to perform output discovery &amp; configuration at load time.
+ Likewise, if pre-memory management aware user level drivers are
+ in use, memory management and command buffer setup may need to
+ be omitted. These requirements are driver specific, and care
+ needs to be taken to keep both old and new applications and
+ libraries working. The i915 driver supports the "modeset"
+ module parameter to control whether advanced features are
+ enabled at load time or in legacy fashion. If compatibility is
+ a concern (e.g. with drivers converted over to the new interfaces
+ from the old ones), care must be taken to prevent incompatible
+ device initialization and control with the currently active
+ userspace drivers.
+ </para>
+
+ <sect2>
+ <title>Driver private &amp; performance counters</title>
+ <para>
+ The driver private hangs off the main drm_device structure and
+ can be used for tracking various device specific bits of
+ information, like register offsets, command buffer status,
+ register state for suspend/resume, etc. At load time, a
+ driver can simply allocate one and set drm_device.dev_priv
+ appropriately; at unload the driver can free it and set
+ drm_device.dev_priv to NULL.
+ </para>
+ <para>
+ The DRM supports several counters which can be used for rough
+ performance characterization. Note that the DRM stat counter
+ system is not often used by applications, and supporting
+ additional counters is completely optional.
+ </para>
+ <para>
+ These interfaces are deprecated and should not be used. If performance
+ monitoring is desired, the developer should investigate and
+ potentially enhance the kernel perf and tracing infrastructure to export
+ GPU related performance information to performance monitoring
+ tools and applications.
+ </para>
+ </sect2>
+
+ <sect2>
+ <title>Configuring the device</title>
+ <para>
+ Obviously, device configuration will be device specific.
+ However, there are several common operations: finding a
+ device's PCI resources, mapping them, and potentially setting
+ up an IRQ handler.
+ </para>
+ <para>
+ Finding &amp; mapping resources is fairly straightforward. The
+ DRM wrapper functions, drm_get_resource_start() and
+ drm_get_resource_len() can be used to find BARs on the given
+ drm_device struct. Once those values have been retrieved, the
+ driver load function can call drm_addmap() to create a new
+ mapping for the BAR in question. Note you'll probably want a
+ drm_local_map_t in your driver private structure to track any
+ mappings you create.
+<!-- !Fdrivers/gpu/drm/drm_bufs.c drm_get_resource_* -->
+<!-- !Finclude/drm/drmP.h drm_local_map_t -->
+ </para>
+ <para>
+ if compatibility with other operating systems isn't a concern
+ (DRM drivers can run under various BSD variants and OpenSolaris),
+ native Linux calls can be used for the above, e.g. pci_resource_*
+ and iomap*/iounmap. See the Linux device driver book for more
+ info.
+ </para>
+ <para>
+ Once you have a register map, you can use the DRM_READn() and
+ DRM_WRITEn() macros to access the registers on your device, or
+ use driver specific versions to offset into your MMIO space
+ relative to a driver specific base pointer (see I915_READ for
+ example).
+ </para>
+ <para>
+ If your device supports interrupt generation, you may want to
+ setup an interrupt handler at driver load time as well. This
+ is done using the drm_irq_install() function. If your device
+ supports vertical blank interrupts, it should call
+ drm_vblank_init() to initialize the core vblank handling code before
+ enabling interrupts on your device. This ensures the vblank related
+ structures are allocated and allows the core to handle vblank events.
+ </para>
+<!--!Fdrivers/char/drm/drm_irq.c drm_irq_install-->
+ <para>
+ Once your interrupt handler is registered (it'll use your
+ drm_driver.irq_handler as the actual interrupt handling
+ function), you can safely enable interrupts on your device,
+ assuming any other state your interrupt handler uses is also
+ initialized.
+ </para>
+ <para>
+ Another task that may be necessary during configuration is
+ mapping the video BIOS. On many devices, the VBIOS describes
+ device configuration, LCD panel timings (if any), and contains
+ flags indicating device state. Mapping the BIOS can be done
+ using the pci_map_rom() call, a convenience function that
+ takes care of mapping the actual ROM, whether it has been
+ shadowed into memory (typically at address 0xc0000) or exists
+ on the PCI device in the ROM BAR. Note that once you've
+ mapped the ROM and extracted any necessary information, be
+ sure to unmap it; on many devices the ROM address decoder is
+ shared with other BARs, so leaving it mapped can cause
+ undesired behavior like hangs or memory corruption.
+<!--!Fdrivers/pci/rom.c pci_map_rom-->
+ </para>
+ </sect2>
+
+ <sect2>
+ <title>Memory manager initialization</title>
+ <para>
+ In order to allocate command buffers, cursor memory, scanout
+ buffers, etc., as well as support the latest features provided
+ by packages like Mesa and the X.Org X server, your driver
+ should support a memory manager.
+ </para>
+ <para>
+ If your driver supports memory management (it should!), you'll
+ need to set that up at load time as well. How you initialize
+ it depends on which memory manager you're using, TTM or GEM.
+ </para>
+ <sect3>
+ <title>TTM initialization</title>
+ <para>
+ TTM (for Translation Table Manager) manages video memory and
+ aperture space for graphics devices. TTM supports both UMA devices
+ and devices with dedicated video RAM (VRAM), i.e. most discrete
+ graphics devices. If your device has dedicated RAM, supporting
+ TTM is desirable. TTM also integrates tightly with your
+ driver specific buffer execution function. See the radeon
+ driver for examples.
+ </para>
+ <para>
+ The core TTM structure is the ttm_bo_driver struct. It contains
+ several fields with function pointers for initializing the TTM,
+ allocating and freeing memory, waiting for command completion
+ and fence synchronization, and memory migration. See the
+ radeon_ttm.c file for an example of usage.
+ </para>
+ <para>
+ The ttm_global_reference structure is made up of several fields:
+ </para>
+ <programlisting>
+ struct ttm_global_reference {
+ enum ttm_global_types global_type;
+ size_t size;
+ void *object;
+ int (*init) (struct ttm_global_reference *);
+ void (*release) (struct ttm_global_reference *);
+ };
+ </programlisting>
+ <para>
+ There should be one global reference structure for your memory
+ manager as a whole, and there will be others for each object
+ created by the memory manager at runtime. Your global TTM should
+ have a type of TTM_GLOBAL_TTM_MEM. The size field for the global
+ object should be sizeof(struct ttm_mem_global), and the init and
+ release hooks should point at your driver specific init and
+ release routines, which will probably eventually call
+ ttm_mem_global_init and ttm_mem_global_release respectively.
+ </para>
+ <para>
+ Once your global TTM accounting structure is set up and initialized
+ (done by calling ttm_global_item_ref on the global object you
+ just created), you'll need to create a buffer object TTM to
+ provide a pool for buffer object allocation by clients and the
+ kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO,
+ and its size should be sizeof(struct ttm_bo_global). Again,
+ driver specific init and release functions can be provided,
+ likely eventually calling ttm_bo_global_init and
+ ttm_bo_global_release, respectively. Also like the previous
+ object, ttm_global_item_ref is used to create an initial reference
+ count for the TTM, which will call your initialization function.
+ </para>
+ </sect3>
+ <sect3>
+ <title>GEM initialization</title>
+ <para>
+ GEM is an alternative to TTM, designed specifically for UMA
+ devices. It has simpler initialization and execution requirements
+ than TTM, but has no VRAM management capability. Core GEM
+ initialization is comprised of a basic drm_mm_init call to create
+ a GTT DRM MM object, which provides an address space pool for
+ object allocation. In a KMS configuration, the driver will
+ need to allocate and initialize a command ring buffer following
+ basic GEM initialization. Most UMA devices have a so-called
+ "stolen" memory region, which provides space for the initial
+ framebuffer and large, contiguous memory regions required by the
+ device. This space is not typically managed by GEM, and must
+ be initialized separately into its own DRM MM object.
+ </para>
+ <para>
+ Initialization will be driver specific, and will depend on
+ the architecture of the device. In the case of Intel
+ integrated graphics chips like 965GM, GEM initialization can
+ be done by calling the internal GEM init function,
+ i915_gem_do_init(). Since the 965GM is a UMA device
+ (i.e. it doesn't have dedicated VRAM), GEM will manage
+ making regular RAM available for GPU operations. Memory set
+ aside by the BIOS (called "stolen" memory by the i915
+ driver) will be managed by the DRM memrange allocator; the
+ rest of the aperture will be managed by GEM.
+ <programlisting>
+ /* Basic memrange allocator for stolen space (aka vram) */
+ drm_memrange_init(&amp;dev_priv->vram, 0, prealloc_size);
+ /* Let GEM Manage from end of prealloc space to end of aperture */
+ i915_gem_do_init(dev, prealloc_size, agp_size);
+ </programlisting>
+<!--!Edrivers/char/drm/drm_memrange.c-->
+ </para>
+ <para>
+ Once the memory manager has been set up, we can allocate the
+ command buffer. In the i915 case, this is also done with a
+ GEM function, i915_gem_init_ringbuffer().
+ </para>
+ </sect3>
+ </sect2>
+
+ <sect2>
+ <title>Output configuration</title>
+ <para>
+ The final initialization task is output configuration. This involves
+ finding and initializing the CRTCs, encoders and connectors
+ for your device, creating an initial configuration and
+ registering a framebuffer console driver.
+ </para>
+ <sect3>
+ <title>Output discovery and initialization</title>
+ <para>
+ Several core functions exist to create CRTCs, encoders and
+ connectors, namely drm_crtc_init(), drm_connector_init() and
+ drm_encoder_init(), along with several "helper" functions to
+ perform common tasks.
+ </para>
+ <para>
+ Connectors should be registered with sysfs once they've been
+ detected and initialized, using the
+ drm_sysfs_connector_add() function. Likewise, when they're
+ removed from the system, they should be destroyed with
+ drm_sysfs_connector_remove().
+ </para>
+ <programlisting>
+<![CDATA[
+void intel_crt_init(struct drm_device *dev)
+{
+ struct drm_connector *connector;
+ struct intel_output *intel_output;
+
+ intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
+ if (!intel_output)
+ return;
+
+ connector = &intel_output->base;
+ drm_connector_init(dev, &intel_output->base,
+ &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
+
+ drm_encoder_init(dev, &intel_output->enc, &intel_crt_enc_funcs,
+ DRM_MODE_ENCODER_DAC);
+
+ drm_mode_connector_attach_encoder(&intel_output->base,
+ &intel_output->enc);
+
+ /* Set up the DDC bus. */
+ intel_output->ddc_bus = intel_i2c_create(dev, GPIOA, "CRTDDC_A");
+ if (!intel_output->ddc_bus) {
+ dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
+ "failed.\n");
+ return;
+ }
+
+ intel_output->type = INTEL_OUTPUT_ANALOG;
+ connector->interlace_allowed = 0;
+ connector->doublescan_allowed = 0;
+
+ drm_encoder_helper_add(&intel_output->enc, &intel_crt_helper_funcs);
+ drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
+
+ drm_sysfs_connector_add(connector);
+}
+]]>
+ </programlisting>
+ <para>
+ In the example above (again, taken from the i915 driver), a
+ CRT connector and encoder combination is created. A device
+ specific i2c bus is also created, for fetching EDID data and
+ performing monitor detection. Once the process is complete,
+ the new connector is registered with sysfs, to make its
+ properties available to applications.
+ </para>
+ <sect4>
+ <title>Helper functions and core functions</title>
+ <para>
+ Since many PC-class graphics devices have similar display output
+ designs, the DRM provides a set of helper functions to make
+ output management easier. The core helper routines handle
+ encoder re-routing and disabling of unused functions following
+ mode set. Using the helpers is optional, but recommended for
+ devices with PC-style architectures (i.e. a set of display planes
+ for feeding pixels to encoders which are in turn routed to
+ connectors). Devices with more complex requirements needing
+ finer grained management can opt to use the core callbacks
+ directly.
+ </para>
+ <para>
+ [Insert typical diagram here.] [Insert OMAP style config here.]
+ </para>
+ </sect4>
+ <para>
+ For each encoder, CRTC and connector, several functions must
+ be provided, depending on the object type. Encoder objects
+ need to provide a DPMS (basically on/off) function, mode fixup
+ (for converting requested modes into native hardware timings),
+ and prepare, set and commit functions for use by the core DRM
+ helper functions. Connector helpers need to provide mode fetch and
+ validity functions as well as an encoder matching function for
+ returning an ideal encoder for a given connector. The core
+ connector functions include a DPMS callback, (deprecated)
+ save/restore routines, detection, mode probing, property handling,
+ and cleanup functions.
+ </para>
+<!--!Edrivers/char/drm/drm_crtc.h-->
+<!--!Edrivers/char/drm/drm_crtc.c-->
+<!--!Edrivers/char/drm/drm_crtc_helper.c-->
+ </sect3>
+ </sect2>
+ </sect1>
+
+ <!-- Internals: vblank handling -->
+
+ <sect1>
+ <title>VBlank event handling</title>
+ <para>
+ The DRM core exposes two vertical blank related ioctls:
+ DRM_IOCTL_WAIT_VBLANK and DRM_IOCTL_MODESET_CTL.
+<!--!Edrivers/char/drm/drm_irq.c-->
+ </para>
+ <para>
+ DRM_IOCTL_WAIT_VBLANK takes a struct drm_wait_vblank structure
+ as its argument, and is used to block or request a signal when a
+ specified vblank event occurs.
+ </para>
+ <para>
+ DRM_IOCTL_MODESET_CTL should be called by application level
+ drivers before and after mode setting, since on many devices the
+ vertical blank counter will be reset at that time. Internally,
+ the DRM snapshots the last vblank count when the ioctl is called
+ with the _DRM_PRE_MODESET command so that the counter won't go
+ backwards (which is dealt with when _DRM_POST_MODESET is used).
+ </para>
+ <para>
+ To support the functions above, the DRM core provides several
+ helper functions for tracking vertical blank counters, and
+ requires drivers to provide several callbacks:
+ get_vblank_counter(), enable_vblank() and disable_vblank(). The
+ core uses get_vblank_counter() to keep the counter accurate
+ across interrupt disable periods. It should return the current
+ vertical blank event count, which is often tracked in a device
+ register. The enable and disable vblank callbacks should enable
+ and disable vertical blank interrupts, respectively. In the
+ absence of DRM clients waiting on vblank events, the core DRM
+ code will use the disable_vblank() function to disable
+ interrupts, which saves power. They'll be re-enabled again when
+ a client calls the vblank wait ioctl above.
+ </para>
+ <para>
+ Devices that don't provide a count register can simply use an
+ internal atomic counter incremented on every vertical blank
+ interrupt, and can make their enable and disable vblank
+ functions into no-ops.
+ </para>
+ </sect1>
+
+ <sect1>
+ <title>Memory management</title>
+ <para>
+ The memory manager lies at the heart of many DRM operations, and
+ is also required to support advanced client features like OpenGL
+ pbuffers. The DRM currently contains two memory managers, TTM
+ and GEM.
+ </para>
+
+ <sect2>
+ <title>The Translation Table Manager (TTM)</title>
+ <para>
+ TTM was developed by Tungsten Graphics, primarily by Thomas
+ Hellström, and is intended to be a flexible, high performance
+ graphics memory manager.
+ </para>
+ <para>
+ Drivers wishing to support TTM must fill out a drm_bo_driver
+ structure.
+ </para>
+ <para>
+ TTM design background and information belongs here.
+ </para>
+ </sect2>
+
+ <sect2>
+ <title>The Graphics Execution Manager (GEM)</title>
+ <para>
+ GEM is an Intel project, authored by Eric Anholt and Keith
+ Packard. It provides simpler interfaces than TTM, and is well
+ suited for UMA devices.
+ </para>
+ <para>
+ GEM-enabled drivers must provide gem_init_object() and
+ gem_free_object() callbacks to support the core memory
+ allocation routines. They should also provide several driver
+ specific ioctls to support command execution, pinning, buffer
+ read &amp; write, mapping, and domain ownership transfers.
+ </para>
+ <para>
+ On a fundamental level, GEM involves several operations: memory
+ allocation and freeing, command execution, and aperture management
+ at command execution time. Buffer object allocation is relatively
+ straightforward and largely provided by Linux's shmem layer, which
+ provides memory to back each object. When mapped into the GTT
+ or used in a command buffer, the backing pages for an object are
+ flushed to memory and marked write combined so as to be coherent
+ with the GPU. Likewise, when the GPU finishes rendering to an object,
+ if the CPU accesses it, it must be made coherent with the CPU's view
+ of memory, usually involving GPU cache flushing of various kinds.
+ This core CPU&lt;-&gt;GPU coherency management is provided by the GEM
+ set domain function, which evaluates an object's current domain and
+ performs any necessary flushing or synchronization to put the object
+ into the desired coherency domain (note that the object may be busy,
+ i.e. an active render target; in that case the set domain function
+ will block the client and wait for rendering to complete before
+ performing any necessary flushing operations).
+ </para>
+ <para>
+ Perhaps the most important GEM function is providing a command
+ execution interface to clients. Client programs construct command
+ buffers containing references to previously allocated memory objects
+ and submit them to GEM. At that point, GEM will take care to bind
+ all the objects into the GTT, execute the buffer, and provide
+ necessary synchronization between clients accessing the same buffers.
+ This often involves evicting some objects from the GTT and re-binding
+ others (a fairly expensive operation), and providing relocation
+ support which hides fixed GTT offsets from clients. Clients must
+ take care not to submit command buffers that reference more objects
+ than can fit in the GTT or GEM will reject them and no rendering
+ will occur. Similarly, if several objects in the buffer require
+ fence registers to be allocated for correct rendering (e.g. 2D blits
+ on pre-965 chips), care must be taken not to require more fence
+ registers than are available to the client. Such resource management
+ should be abstracted from the client in libdrm.
+ </para>
+ </sect2>
+
+ </sect1>
+
+ <!-- Output management -->
+ <sect1>
+ <title>Output management</title>
+ <para>
+ At the core of the DRM output management code is a set of
+ structures representing CRTCs, encoders and connectors.
+ </para>
+ <para>
+ A CRTC is an abstraction representing a part of the chip that
+ contains a pointer to a scanout buffer. Therefore, the number
+ of CRTCs available determines how many independent scanout
+ buffers can be active at any given time. The CRTC structure
+ contains several fields to support this: a pointer to some video
+ memory, a display mode, and an (x, y) offset into the video
+ memory to support panning or configurations where one piece of
+ video memory spans multiple CRTCs.
+ </para>
+ <para>
+ An encoder takes pixel data from a CRTC and converts it to a
+ format suitable for any attached connectors. On some devices,
+ it may be possible to have a CRTC send data to more than one
+ encoder. In that case, both encoders would receive data from
+ the same scanout buffer, resulting in a "cloned" display
+ configuration across the connectors attached to each encoder.
+ </para>
+ <para>
+ A connector is the final destination for pixel data on a device,
+ and usually connects directly to an external display device like
+ a monitor or laptop panel. A connector can only be attached to
+ one encoder at a time. The connector is also the structure
+ where information about the attached display is kept, so it
+ contains fields for display data, EDID data, DPMS &amp;
+ connection status, and information about modes supported on the
+ attached displays.
+ </para>
+<!--!Edrivers/char/drm/drm_crtc.c-->
+ </sect1>
+
+ <sect1>
+ <title>Framebuffer management</title>
+ <para>
+ In order to set a mode on a given CRTC, encoder and connector
+ configuration, clients need to provide a framebuffer object which
+ will provide a source of pixels for the CRTC to deliver to the encoder(s)
+ and ultimately the connector(s) in the configuration. A framebuffer
+ is fundamentally a driver specific memory object, made into an opaque
+ handle by the DRM addfb function. Once an fb has been created this
+ way it can be passed to the KMS mode setting routines for use in
+ a configuration.
+ </para>
+ </sect1>
+
+ <sect1>
+ <title>Command submission &amp; fencing</title>
+ <para>
+ This should cover a few device specific command submission
+ implementations.
+ </para>
+ </sect1>
+
+ <sect1>
+ <title>Suspend/resume</title>
+ <para>
+ The DRM core provides some suspend/resume code, but drivers
+ wanting full suspend/resume support should provide save() and
+ restore() functions. These will be called at suspend,
+ hibernate, or resume time, and should perform any state save or
+ restore required by your device across suspend or hibernate
+ states.
+ </para>
+ </sect1>
+
+ <sect1>
+ <title>DMA services</title>
+ <para>
+ This should cover how DMA mapping etc. is supported by the core.
+ These functions are deprecated and should not be used.
+ </para>
+ </sect1>
+ </chapter>
+
+ <!-- External interfaces -->
+
+ <chapter id="drmExternals">
+ <title>Userland interfaces</title>
+ <para>
+ The DRM core exports several interfaces to applications,
+ generally intended to be used through corresponding libdrm
+ wrapper functions. In addition, drivers export device specific
+ interfaces for use by userspace drivers &amp; device aware
+ applications through ioctls and sysfs files.
+ </para>
+ <para>
+ External interfaces include: memory mapping, context management,
+ DMA operations, AGP management, vblank control, fence
+ management, memory management, and output management.
+ </para>
+ <para>
+ Cover generic ioctls and sysfs layout here. Only need high
+ level info, since man pages will cover the rest.
+ </para>
+ </chapter>
+
+ <!-- API reference -->
+
+ <appendix id="drmDriverApi">
+ <title>DRM Driver API</title>
+ <para>
+ Include auto-generated API reference here (need to reference it
+ from paragraphs above too).
+ </para>
+ </appendix>
+
+</book>
diff --git a/Documentation/DocBook/dvb/dvbapi.xml b/Documentation/DocBook/dvb/dvbapi.xml
index 63c528fee62..e3a97fdd62a 100644
--- a/Documentation/DocBook/dvb/dvbapi.xml
+++ b/Documentation/DocBook/dvb/dvbapi.xml
@@ -12,10 +12,12 @@
<othername role="mi">O. C.</othername>
<affiliation><address><email>rjkm@metzlerbros.de</email></address></affiliation>
</author>
+</authorgroup>
+<authorgroup>
<author>
<firstname>Mauro</firstname>
-<surname>Chehab</surname>
<othername role="mi">Carvalho</othername>
+<surname>Chehab</surname>
<affiliation><address><email>mchehab@redhat.com</email></address></affiliation>
<contrib>Ported document to Docbook XML.</contrib>
</author>
@@ -23,13 +25,24 @@
<copyright>
<year>2002</year>
<year>2003</year>
- <year>2009</year>
<holder>Convergence GmbH</holder>
</copyright>
+<copyright>
+ <year>2009-2010</year>
+ <holder>Mauro Carvalho Chehab</holder>
+</copyright>
<revhistory>
<!-- Put document revisions here, newest first. -->
<revision>
+ <revnumber>2.0.3</revnumber>
+ <date>2010-07-03</date>
+ <authorinitials>mcc</authorinitials>
+ <revremark>
+ Add some frontend capabilities flags, present on kernel, but missing at the specs.
+ </revremark>
+</revision>
+<revision>
<revnumber>2.0.2</revnumber>
<date>2009-10-25</date>
<authorinitials>mcc</authorinitials>
@@ -63,7 +76,7 @@ Added ISDB-T test originally written by Patrick Boettcher
<title>LINUX DVB API</title>
-<subtitle>Version 3</subtitle>
+<subtitle>Version 5.2</subtitle>
<!-- ADD THE CHAPTERS HERE -->
<chapter id="dvb_introdution">
&sub-intro;
diff --git a/Documentation/DocBook/dvb/frontend.h.xml b/Documentation/DocBook/dvb/frontend.h.xml
index b99644f5340..d08e0d40141 100644
--- a/Documentation/DocBook/dvb/frontend.h.xml
+++ b/Documentation/DocBook/dvb/frontend.h.xml
@@ -63,6 +63,7 @@ typedef enum fe_caps {
FE_CAN_8VSB = 0x200000,
FE_CAN_16VSB = 0x400000,
FE_HAS_EXTENDED_CAPS = 0x800000, /* We need more bitspace for newer APIs, indicate this. */
+ FE_CAN_TURBO_FEC = 0x8000000, /* frontend supports "turbo fec modulation" */
FE_CAN_2G_MODULATION = 0x10000000, /* frontend supports "2nd generation modulation" (DVB-S2) */
FE_NEEDS_BENDING = 0x20000000, /* not supported anymore, don't use (frontend requires frequency bending) */
FE_CAN_RECOVER = 0x40000000, /* frontend can recover from a cable unplug automatically */
diff --git a/Documentation/DocBook/dvb/frontend.xml b/Documentation/DocBook/dvb/frontend.xml
index 300ba1f0417..78d756de590 100644
--- a/Documentation/DocBook/dvb/frontend.xml
+++ b/Documentation/DocBook/dvb/frontend.xml
@@ -64,8 +64,14 @@ a specific frontend type.</para>
FE_CAN_BANDWIDTH_AUTO = 0x40000,
FE_CAN_GUARD_INTERVAL_AUTO = 0x80000,
FE_CAN_HIERARCHY_AUTO = 0x100000,
- FE_CAN_MUTE_TS = 0x80000000,
- FE_CAN_CLEAN_SETUP = 0x40000000
+ FE_CAN_8VSB = 0x200000,
+ FE_CAN_16VSB = 0x400000,
+ FE_HAS_EXTENDED_CAPS = 0x800000,
+ FE_CAN_TURBO_FEC = 0x8000000,
+ FE_CAN_2G_MODULATION = 0x10000000,
+ FE_NEEDS_BENDING = 0x20000000,
+ FE_CAN_RECOVER = 0x40000000,
+ FE_CAN_MUTE_TS = 0x80000000
} fe_caps_t;
</programlisting>
</section>
diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl
index 44b3def961a..6899f471fb1 100644
--- a/Documentation/DocBook/kernel-api.tmpl
+++ b/Documentation/DocBook/kernel-api.tmpl
@@ -57,7 +57,6 @@
</para>
<sect1><title>String Conversions</title>
-!Ilib/vsprintf.c
!Elib/vsprintf.c
</sect1>
<sect1><title>String Manipulation</title>
@@ -132,7 +131,6 @@ X!Ilib/string.c
<title>FIFO Buffer</title>
<sect1><title>kfifo interface</title>
!Iinclude/linux/kfifo.h
-!Ekernel/kfifo.c
</sect1>
</chapter>
diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl
index 084f6ad7b7a..a0d479d1e1d 100644
--- a/Documentation/DocBook/kernel-locking.tmpl
+++ b/Documentation/DocBook/kernel-locking.tmpl
@@ -1922,9 +1922,12 @@ machines due to caching.
<function>mutex_lock()</function>
</para>
<para>
- There is a <function>mutex_trylock()</function> which can be
- used inside interrupt context, as it will not sleep.
+ There is a <function>mutex_trylock()</function> which does not
+ sleep. Still, it must not be used inside interrupt context since
+ its implementation is not safe for that.
<function>mutex_unlock()</function> will also never sleep.
+ It cannot be used in interrupt context either since a mutex
+ must be released by the same task that acquired it.
</para>
</listitem>
</itemizedlist>
@@ -1958,6 +1961,12 @@ machines due to caching.
</sect1>
</chapter>
+ <chapter id="apiref">
+ <title>Mutex API reference</title>
+!Iinclude/linux/mutex.h
+!Ekernel/mutex.c
+ </chapter>
+
<chapter id="references">
<title>Further reading</title>
diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl
index 5cff41a5fa7..490d862c5f0 100644
--- a/Documentation/DocBook/kgdb.tmpl
+++ b/Documentation/DocBook/kgdb.tmpl
@@ -4,7 +4,7 @@
<book id="kgdbOnLinux">
<bookinfo>
- <title>Using kgdb and the kgdb Internals</title>
+ <title>Using kgdb, kdb and the kernel debugger internals</title>
<authorgroup>
<author>
@@ -17,33 +17,8 @@
</affiliation>
</author>
</authorgroup>
-
- <authorgroup>
- <author>
- <firstname>Tom</firstname>
- <surname>Rini</surname>
- <affiliation>
- <address>
- <email>trini@kernel.crashing.org</email>
- </address>
- </affiliation>
- </author>
- </authorgroup>
-
- <authorgroup>
- <author>
- <firstname>Amit S.</firstname>
- <surname>Kale</surname>
- <affiliation>
- <address>
- <email>amitkale@linsyssoft.com</email>
- </address>
- </affiliation>
- </author>
- </authorgroup>
-
<copyright>
- <year>2008</year>
+ <year>2008,2010</year>
<holder>Wind River Systems, Inc.</holder>
</copyright>
<copyright>
@@ -69,41 +44,76 @@
<chapter id="Introduction">
<title>Introduction</title>
<para>
- kgdb is a source level debugger for linux kernel. It is used along
- with gdb to debug a linux kernel. The expectation is that gdb can
- be used to "break in" to the kernel to inspect memory, variables
- and look through call stack information similar to what an
- application developer would use gdb for. It is possible to place
- breakpoints in kernel code and perform some limited execution
- stepping.
+ The kernel has two different debugger front ends (kdb and kgdb)
+ which interface to the debug core. It is possible to use either
+ of the debugger front ends and dynamically transition between them
+ if you configure the kernel properly at compile and runtime.
+ </para>
+ <para>
+ Kdb is simplistic shell-style interface which you can use on a
+ system console with a keyboard or serial console. You can use it
+ to inspect memory, registers, process lists, dmesg, and even set
+ breakpoints to stop in a certain location. Kdb is not a source
+ level debugger, although you can set breakpoints and execute some
+ basic kernel run control. Kdb is mainly aimed at doing some
+ analysis to aid in development or diagnosing kernel problems. You
+ can access some symbols by name in kernel built-ins or in kernel
+ modules if the code was built
+ with <symbol>CONFIG_KALLSYMS</symbol>.
+ </para>
+ <para>
+ Kgdb is intended to be used as a source level debugger for the
+ Linux kernel. It is used along with gdb to debug a Linux kernel.
+ The expectation is that gdb can be used to "break in" to the
+ kernel to inspect memory, variables and look through call stack
+ information similar to the way an application developer would use
+ gdb to debug an application. It is possible to place breakpoints
+ in kernel code and perform some limited execution stepping.
</para>
<para>
- Two machines are required for using kgdb. One of these machines is a
- development machine and the other is a test machine. The kernel
- to be debugged runs on the test machine. The development machine
- runs an instance of gdb against the vmlinux file which contains
- the symbols (not boot image such as bzImage, zImage, uImage...).
- In gdb the developer specifies the connection parameters and
- connects to kgdb. The type of connection a developer makes with
- gdb depends on the availability of kgdb I/O modules compiled as
- builtin's or kernel modules in the test machine's kernel.
+ Two machines are required for using kgdb. One of these machines is
+ a development machine and the other is the target machine. The
+ kernel to be debugged runs on the target machine. The development
+ machine runs an instance of gdb against the vmlinux file which
+ contains the symbols (not boot image such as bzImage, zImage,
+ uImage...). In gdb the developer specifies the connection
+ parameters and connects to kgdb. The type of connection a
+ developer makes with gdb depends on the availability of kgdb I/O
+ modules compiled as built-ins or loadable kernel modules in the test
+ machine's kernel.
</para>
</chapter>
<chapter id="CompilingAKernel">
- <title>Compiling a kernel</title>
+ <title>Compiling a kernel</title>
+ <para>
+ <itemizedlist>
+ <listitem><para>In order to enable compilation of kdb, you must first enable kgdb.</para></listitem>
+ <listitem><para>The kgdb test compile options are described in the kgdb test suite chapter.</para></listitem>
+ </itemizedlist>
+ </para>
+ <sect1 id="CompileKGDB">
+ <title>Kernel config options for kgdb</title>
<para>
To enable <symbol>CONFIG_KGDB</symbol> you should first turn on
"Prompt for development and/or incomplete code/drivers"
(CONFIG_EXPERIMENTAL) in "General setup", then under the
- "Kernel debugging" select "KGDB: kernel debugging with remote gdb".
+ "Kernel debugging" select "KGDB: kernel debugger".
+ </para>
+ <para>
+ While it is not a hard requirement that you have symbols in your
+ vmlinux file, gdb tends not to be very useful without the symbolic
+ data, so you will want to turn
+ on <symbol>CONFIG_DEBUG_INFO</symbol> which is called "Compile the
+ kernel with debug info" in the config menu.
</para>
<para>
It is advised, but not required that you turn on the
- CONFIG_FRAME_POINTER kernel option. This option inserts code to
- into the compiled executable which saves the frame information in
- registers or on the stack at different points which will allow a
- debugger such as gdb to more accurately construct stack back traces
- while debugging the kernel.
+ <symbol>CONFIG_FRAME_POINTER</symbol> kernel option which is called "Compile the
+ kernel with frame pointers" in the config menu. This option
+ inserts code to into the compiled executable which saves the frame
+ information in registers or on the stack at different points which
+ allows a debugger such as gdb to more accurately construct
+ stack back traces while debugging the kernel.
</para>
<para>
If the architecture that you are using supports the kernel option
@@ -116,38 +126,192 @@
this option.
</para>
<para>
- Next you should choose one of more I/O drivers to interconnect debugging
- host and debugged target. Early boot debugging requires a KGDB
- I/O driver that supports early debugging and the driver must be
- built into the kernel directly. Kgdb I/O driver configuration
- takes place via kernel or module parameters, see following
- chapter.
+ Next you should choose one of more I/O drivers to interconnect
+ debugging host and debugged target. Early boot debugging requires
+ a KGDB I/O driver that supports early debugging and the driver
+ must be built into the kernel directly. Kgdb I/O driver
+ configuration takes place via kernel or module parameters which
+ you can learn more about in the in the section that describes the
+ parameter "kgdboc".
</para>
- <para>
- The kgdb test compile options are described in the kgdb test suite chapter.
+ <para>Here is an example set of .config symbols to enable or
+ disable for kgdb:
+ <itemizedlist>
+ <listitem><para># CONFIG_DEBUG_RODATA is not set</para></listitem>
+ <listitem><para>CONFIG_FRAME_POINTER=y</para></listitem>
+ <listitem><para>CONFIG_KGDB=y</para></listitem>
+ <listitem><para>CONFIG_KGDB_SERIAL_CONSOLE=y</para></listitem>
+ </itemizedlist>
</para>
-
+ </sect1>
+ <sect1 id="CompileKDB">
+ <title>Kernel config options for kdb</title>
+ <para>Kdb is quite a bit more complex than the simple gdbstub
+ sitting on top of the kernel's debug core. Kdb must implement a
+ shell, and also adds some helper functions in other parts of the
+ kernel, responsible for printing out interesting data such as what
+ you would see if you ran "lsmod", or "ps". In order to build kdb
+ into the kernel you follow the same steps as you would for kgdb.
+ </para>
+ <para>The main config option for kdb
+ is <symbol>CONFIG_KGDB_KDB</symbol> which is called "KGDB_KDB:
+ include kdb frontend for kgdb" in the config menu. In theory you
+ would have already also selected an I/O driver such as the
+ CONFIG_KGDB_SERIAL_CONSOLE interface if you plan on using kdb on a
+ serial port, when you were configuring kgdb.
+ </para>
+ <para>If you want to use a PS/2-style keyboard with kdb, you would
+ select CONFIG_KDB_KEYBOARD which is called "KGDB_KDB: keyboard as
+ input device" in the config menu. The CONFIG_KDB_KEYBOARD option
+ is not used for anything in the gdb interface to kgdb. The
+ CONFIG_KDB_KEYBOARD option only works with kdb.
+ </para>
+ <para>Here is an example set of .config symbols to enable/disable kdb:
+ <itemizedlist>
+ <listitem><para># CONFIG_DEBUG_RODATA is not set</para></listitem>
+ <listitem><para>CONFIG_FRAME_POINTER=y</para></listitem>
+ <listitem><para>CONFIG_KGDB=y</para></listitem>
+ <listitem><para>CONFIG_KGDB_SERIAL_CONSOLE=y</para></listitem>
+ <listitem><para>CONFIG_KGDB_KDB=y</para></listitem>
+ <listitem><para>CONFIG_KDB_KEYBOARD=y</para></listitem>
+ </itemizedlist>
+ </para>
+ </sect1>
</chapter>
- <chapter id="EnableKGDB">
- <title>Enable kgdb for debugging</title>
- <para>
- In order to use kgdb you must activate it by passing configuration
- information to one of the kgdb I/O drivers. If you do not pass any
- configuration information kgdb will not do anything at all. Kgdb
- will only actively hook up to the kernel trap hooks if a kgdb I/O
- driver is loaded and configured. If you unconfigure a kgdb I/O
- driver, kgdb will unregister all the kernel hook points.
+ <chapter id="kgdbKernelArgs">
+ <title>Kernel Debugger Boot Arguments</title>
+ <para>This section describes the various runtime kernel
+ parameters that affect the configuration of the kernel debugger.
+ The following chapter covers using kdb and kgdb as well as
+ provides some examples of the configuration parameters.</para>
+ <sect1 id="kgdboc">
+ <title>Kernel parameter: kgdboc</title>
+ <para>The kgdboc driver was originally an abbreviation meant to
+ stand for "kgdb over console". Today it is the primary mechanism
+ to configure how to communicate from gdb to kgdb as well as the
+ devices you want to use to interact with the kdb shell.
+ </para>
+ <para>For kgdb/gdb, kgdboc is designed to work with a single serial
+ port. It is intended to cover the circumstance where you want to
+ use a serial console as your primary console as well as using it to
+ perform kernel debugging. It is also possible to use kgdb on a
+ serial port which is not designated as a system console. Kgdboc
+ may be configured as a kernel built-in or a kernel loadable module.
+ You can only make use of <constant>kgdbwait</constant> and early
+ debugging if you build kgdboc into the kernel as a built-in.
+ <para>Optionally you can elect to activate kms (Kernel Mode
+ Setting) integration. When you use kms with kgdboc and you have a
+ video driver that has atomic mode setting hooks, it is possible to
+ enter the debugger on the graphics console. When the kernel
+ execution is resumed, the previous graphics mode will be restored.
+ This integration can serve as a useful tool to aid in diagnosing
+ crashes or doing analysis of memory with kdb while allowing the
+ full graphics console applications to run.
+ </para>
+ </para>
+ <sect2 id="kgdbocArgs">
+ <title>kgdboc arguments</title>
+ <para>Usage: <constant>kgdboc=[kms][[,]kbd][[,]serial_device][,baud]</constant></para>
+ <para>The order listed above must be observed if you use any of the
+ optional configurations together.
</para>
+ <para>Abbreviations:
+ <itemizedlist>
+ <listitem><para>kms = Kernel Mode Setting</para></listitem>
+ <listitem><para>kbd = Keyboard</para></listitem>
+ </itemizedlist>
+ </para>
+ <para>You can configure kgdboc to use the keyboard, and or a serial
+ device depending on if you are using kdb and or kgdb, in one of the
+ following scenarios. The order listed above must be observed if
+ you use any of the optional configurations together. Using kms +
+ only gdb is generally not a useful combination.</para>
+ <sect3 id="kgdbocArgs1">
+ <title>Using loadable module or built-in</title>
<para>
- All drivers can be reconfigured at run time, if
- <symbol>CONFIG_SYSFS</symbol> and <symbol>CONFIG_MODULES</symbol>
- are enabled, by echo'ing a new config string to
- <constant>/sys/module/&lt;driver&gt;/parameter/&lt;option&gt;</constant>.
- The driver can be unconfigured by passing an empty string. You cannot
- change the configuration while the debugger is attached. Make sure
- to detach the debugger with the <constant>detach</constant> command
- prior to trying unconfigure a kgdb I/O driver.
+ <orderedlist>
+ <listitem><para>As a kernel built-in:</para>
+ <para>Use the kernel boot argument: <constant>kgdboc=&lt;tty-device&gt;,[baud]</constant></para></listitem>
+ <listitem>
+ <para>As a kernel loadable module:</para>
+ <para>Use the command: <constant>modprobe kgdboc kgdboc=&lt;tty-device&gt;,[baud]</constant></para>
+ <para>Here are two examples of how you might format the kgdboc
+ string. The first is for an x86 target using the first serial port.
+ The second example is for the ARM Versatile AB using the second
+ serial port.
+ <orderedlist>
+ <listitem><para><constant>kgdboc=ttyS0,115200</constant></para></listitem>
+ <listitem><para><constant>kgdboc=ttyAMA1,115200</constant></para></listitem>
+ </orderedlist>
+ </para>
+ </listitem>
+ </orderedlist></para>
+ </sect3>
+ <sect3 id="kgdbocArgs2">
+ <title>Configure kgdboc at runtime with sysfs</title>
+ <para>At run time you can enable or disable kgdboc by echoing a
+ parameters into the sysfs. Here are two examples:</para>
+ <orderedlist>
+ <listitem><para>Enable kgdboc on ttyS0</para>
+ <para><constant>echo ttyS0 &gt; /sys/module/kgdboc/parameters/kgdboc</constant></para></listitem>
+ <listitem><para>Disable kgdboc</para>
+ <para><constant>echo "" &gt; /sys/module/kgdboc/parameters/kgdboc</constant></para></listitem>
+ </orderedlist>
+ <para>NOTE: You do not need to specify the baud if you are
+ configuring the console on tty which is already configured or
+ open.</para>
+ </sect3>
+ <sect3 id="kgdbocArgs3">
+ <title>More examples</title>
+ <para>You can configure kgdboc to use the keyboard, and or a serial
+ device depending on if you are using kdb and or kgdb, in one of the
+ following scenarios.</para>
+ <para>You can configure kgdboc to use the keyboard, and or a serial device
+ depending on if you are using kdb and or kgdb, in one of the
+ following scenarios.
+ <orderedlist>
+ <listitem><para>kdb and kgdb over only a serial port</para>
+ <para><constant>kgdboc=&lt;serial_device&gt;[,baud]</constant></para>
+ <para>Example: <constant>kgdboc=ttyS0,115200</constant></para>
+ </listitem>
+ <listitem><para>kdb and kgdb with keyboard and a serial port</para>
+ <para><constant>kgdboc=kbd,&lt;serial_device&gt;[,baud]</constant></para>
+ <para>Example: <constant>kgdboc=kbd,ttyS0,115200</constant></para>
+ </listitem>
+ <listitem><para>kdb with a keyboard</para>
+ <para><constant>kgdboc=kbd</constant></para>
+ </listitem>
+ <listitem><para>kdb with kernel mode setting</para>
+ <para><constant>kgdboc=kms,kbd</constant></para>
+ </listitem>
+ <listitem><para>kdb with kernel mode setting and kgdb over a serial port</para>
+ <para><constant>kgdboc=kms,kbd,ttyS0,115200</constant></para>
+ </listitem>
+ </orderedlist>
+ </para>
+ </sect3>
+ <para>NOTE: Kgdboc does not support interrupting the target via the
+ gdb remote protocol. You must manually send a sysrq-g unless you
+ have a proxy that splits console output to a terminal program.
+ A console proxy has a separate TCP port for the debugger and a separate
+ TCP port for the "human" console. The proxy can take care of sending
+ the sysrq-g for you.
</para>
+ <para>When using kgdboc with no debugger proxy, you can end up
+ connecting the debugger at one of two entry points. If an
+ exception occurs after you have loaded kgdboc, a message should
+ print on the console stating it is waiting for the debugger. In
+ this case you disconnect your terminal program and then connect the
+ debugger in its place. If you want to interrupt the target system
+ and forcibly enter a debug session you have to issue a Sysrq
+ sequence and then type the letter <constant>g</constant>. Then
+ you disconnect the terminal session and connect gdb. Your options
+ if you don't like this are to hack gdb to send the sysrq-g for you
+ as well as on the initial connect, or to use a debugger proxy that
+ allows an unmodified gdb to do the debugging.
+ </para>
+ </sect2>
+ </sect1>
<sect1 id="kgdbwait">
<title>Kernel parameter: kgdbwait</title>
<para>
@@ -162,103 +326,204 @@
</para>
<para>
The kernel will stop and wait as early as the I/O driver and
- architecture will allow when you use this option. If you build the
- kgdb I/O driver as a kernel module kgdbwait will not do anything.
+ architecture allows when you use this option. If you build the
+ kgdb I/O driver as a loadable kernel module kgdbwait will not do
+ anything.
</para>
</sect1>
- <sect1 id="kgdboc">
- <title>Kernel parameter: kgdboc</title>
- <para>
- The kgdboc driver was originally an abbreviation meant to stand for
- "kgdb over console". Kgdboc is designed to work with a single
- serial port. It was meant to cover the circumstance
- where you wanted to use a serial console as your primary console as
- well as using it to perform kernel debugging. Of course you can
- also use kgdboc without assigning a console to the same port.
+ <sect1 id="kgdbcon">
+ <title>Kernel parameter: kgdbcon</title>
+ <para> The kgdbcon feature allows you to see printk() messages
+ inside gdb while gdb is connected to the kernel. Kdb does not make
+ use of the kgdbcon feature.
+ </para>
+ <para>Kgdb supports using the gdb serial protocol to send console
+ messages to the debugger when the debugger is connected and running.
+ There are two ways to activate this feature.
+ <orderedlist>
+ <listitem><para>Activate with the kernel command line option:</para>
+ <para><constant>kgdbcon</constant></para>
+ </listitem>
+ <listitem><para>Use sysfs before configuring an I/O driver</para>
+ <para>
+ <constant>echo 1 &gt; /sys/module/kgdb/parameters/kgdb_use_con</constant>
+ </para>
+ <para>
+ NOTE: If you do this after you configure the kgdb I/O driver, the
+ setting will not take effect until the next point the I/O is
+ reconfigured.
+ </para>
+ </listitem>
+ </orderedlist>
+ <para>IMPORTANT NOTE: You cannot use kgdboc + kgdbcon on a tty that is an
+ active system console. An example incorrect usage is <constant>console=ttyS0,115200 kgdboc=ttyS0 kgdbcon</constant>
+ </para>
+ <para>It is possible to use this option with kgdboc on a tty that is not a system console.
+ </para>
</para>
- <sect2 id="UsingKgdboc">
- <title>Using kgdboc</title>
- <para>
- You can configure kgdboc via sysfs or a module or kernel boot line
- parameter depending on if you build with CONFIG_KGDBOC as a module
- or built-in.
- <orderedlist>
- <listitem><para>From the module load or build-in</para>
- <para><constant>kgdboc=&lt;tty-device&gt;,[baud]</constant></para>
+ </sect1>
+ </chapter>
+ <chapter id="usingKDB">
+ <title>Using kdb</title>
<para>
- The example here would be if your console port was typically ttyS0, you would use something like <constant>kgdboc=ttyS0,115200</constant> or on the ARM Versatile AB you would likely use <constant>kgdboc=ttyAMA0,115200</constant>
+ </para>
+ <sect1 id="quickKDBserial">
+ <title>Quick start for kdb on a serial port</title>
+ <para>This is a quick example of how to use kdb.</para>
+ <para><orderedlist>
+ <listitem><para>Boot kernel with arguments:
+ <itemizedlist>
+ <listitem><para><constant>console=ttyS0,115200 kgdboc=ttyS0,115200</constant></para></listitem>
+ </itemizedlist></para>
+ <para>OR</para>
+ <para>Configure kgdboc after the kernel booted; assuming you are using a serial port console:
+ <itemizedlist>
+ <listitem><para><constant>echo ttyS0 &gt; /sys/module/kgdboc/parameters/kgdboc</constant></para></listitem>
+ </itemizedlist>
</para>
</listitem>
- <listitem><para>From sysfs</para>
- <para><constant>echo ttyS0 &gt; /sys/module/kgdboc/parameters/kgdboc</constant></para>
+ <listitem><para>Enter the kernel debugger manually or by waiting for an oops or fault. There are several ways you can enter the kernel debugger manually; all involve using the sysrq-g, which means you must have enabled CONFIG_MAGIC_SYSRQ=y in your kernel config.</para>
+ <itemizedlist>
+ <listitem><para>When logged in as root or with a super user session you can run:</para>
+ <para><constant>echo g &gt; /proc/sysrq-trigger</constant></para></listitem>
+ <listitem><para>Example using minicom 2.2</para>
+ <para>Press: <constant>Control-a</constant></para>
+ <para>Press: <constant>f</constant></para>
+ <para>Press: <constant>g</constant></para>
</listitem>
- </orderedlist>
- </para>
- <para>
- NOTE: Kgdboc does not support interrupting the target via the
- gdb remote protocol. You must manually send a sysrq-g unless you
- have a proxy that splits console output to a terminal problem and
- has a separate port for the debugger to connect to that sends the
- sysrq-g for you.
+ <listitem><para>When you have telneted to a terminal server that supports sending a remote break</para>
+ <para>Press: <constant>Control-]</constant></para>
+ <para>Type in:<constant>send break</constant></para>
+ <para>Press: <constant>Enter</constant></para>
+ <para>Press: <constant>g</constant></para>
+ </listitem>
+ </itemizedlist>
+ </listitem>
+ <listitem><para>From the kdb prompt you can run the "help" command to see a complete list of the commands that are available.</para>
+ <para>Some useful commands in kdb include:
+ <itemizedlist>
+ <listitem><para>lsmod -- Shows where kernel modules are loaded</para></listitem>
+ <listitem><para>ps -- Displays only the active processes</para></listitem>
+ <listitem><para>ps A -- Shows all the processes</para></listitem>
+ <listitem><para>summary -- Shows kernel version info and memory usage</para></listitem>
+ <listitem><para>bt -- Get a backtrace of the current process using dump_stack()</para></listitem>
+ <listitem><para>dmesg -- View the kernel syslog buffer</para></listitem>
+ <listitem><para>go -- Continue the system</para></listitem>
+ </itemizedlist>
</para>
- <para>When using kgdboc with no debugger proxy, you can end up
- connecting the debugger for one of two entry points. If an
- exception occurs after you have loaded kgdboc a message should print
- on the console stating it is waiting for the debugger. In case you
- disconnect your terminal program and then connect the debugger in
- its place. If you want to interrupt the target system and forcibly
- enter a debug session you have to issue a Sysrq sequence and then
- type the letter <constant>g</constant>. Then you disconnect the
- terminal session and connect gdb. Your options if you don't like
- this are to hack gdb to send the sysrq-g for you as well as on the
- initial connect, or to use a debugger proxy that allows an
- unmodified gdb to do the debugging.
+ </listitem>
+ <listitem>
+ <para>When you are done using kdb you need to consider rebooting the
+ system or using the "go" command to resuming normal kernel
+ execution. If you have paused the kernel for a lengthy period of
+ time, applications that rely on timely networking or anything to do
+ with real wall clock time could be adversely affected, so you
+ should take this into consideration when using the kernel
+ debugger.</para>
+ </listitem>
+ </orderedlist></para>
+ </sect1>
+ <sect1 id="quickKDBkeyboard">
+ <title>Quick start for kdb using a keyboard connected console</title>
+ <para>This is a quick example of how to use kdb with a keyboard.</para>
+ <para><orderedlist>
+ <listitem><para>Boot kernel with arguments:
+ <itemizedlist>
+ <listitem><para><constant>kgdboc=kbd</constant></para></listitem>
+ </itemizedlist></para>
+ <para>OR</para>
+ <para>Configure kgdboc after the kernel booted:
+ <itemizedlist>
+ <listitem><para><constant>echo kbd &gt; /sys/module/kgdboc/parameters/kgdboc</constant></para></listitem>
+ </itemizedlist>
</para>
- </sect2>
+ </listitem>
+ <listitem><para>Enter the kernel debugger manually or by waiting for an oops or fault. There are several ways you can enter the kernel debugger manually; all involve using the sysrq-g, which means you must have enabled CONFIG_MAGIC_SYSRQ=y in your kernel config.</para>
+ <itemizedlist>
+ <listitem><para>When logged in as root or with a super user session you can run:</para>
+ <para><constant>echo g &gt; /proc/sysrq-trigger</constant></para></listitem>
+ <listitem><para>Example using a laptop keyboard</para>
+ <para>Press and hold down: <constant>Alt</constant></para>
+ <para>Press and hold down: <constant>Fn</constant></para>
+ <para>Press and release the key with the label: <constant>SysRq</constant></para>
+ <para>Release: <constant>Fn</constant></para>
+ <para>Press and release: <constant>g</constant></para>
+ <para>Release: <constant>Alt</constant></para>
+ </listitem>
+ <listitem><para>Example using a PS/2 101-key keyboard</para>
+ <para>Press and hold down: <constant>Alt</constant></para>
+ <para>Press and release the key with the label: <constant>SysRq</constant></para>
+ <para>Press and release: <constant>g</constant></para>
+ <para>Release: <constant>Alt</constant></para>
+ </listitem>
+ </itemizedlist>
+ </listitem>
+ <listitem>
+ <para>Now type in a kdb command such as "help", "dmesg", "bt" or "go" to continue kernel execution.</para>
+ </listitem>
+ </orderedlist></para>
</sect1>
- <sect1 id="kgdbcon">
- <title>Kernel parameter: kgdbcon</title>
- <para>
- Kgdb supports using the gdb serial protocol to send console messages
- to the debugger when the debugger is connected and running. There
- are two ways to activate this feature.
+ </chapter>
+ <chapter id="EnableKGDB">
+ <title>Using kgdb / gdb</title>
+ <para>In order to use kgdb you must activate it by passing
+ configuration information to one of the kgdb I/O drivers. If you
+ do not pass any configuration information kgdb will not do anything
+ at all. Kgdb will only actively hook up to the kernel trap hooks
+ if a kgdb I/O driver is loaded and configured. If you unconfigure
+ a kgdb I/O driver, kgdb will unregister all the kernel hook points.
+ </para>
+ <para> All kgdb I/O drivers can be reconfigured at run time, if
+ <symbol>CONFIG_SYSFS</symbol> and <symbol>CONFIG_MODULES</symbol>
+ are enabled, by echo'ing a new config string to
+ <constant>/sys/module/&lt;driver&gt;/parameter/&lt;option&gt;</constant>.
+ The driver can be unconfigured by passing an empty string. You cannot
+ change the configuration while the debugger is attached. Make sure
+ to detach the debugger with the <constant>detach</constant> command
+ prior to trying to unconfigure a kgdb I/O driver.
+ </para>
+ <sect1 id="ConnectingGDB">
+ <title>Connecting with gdb to a serial port</title>
<orderedlist>
- <listitem><para>Activate with the kernel command line option:</para>
- <para><constant>kgdbcon</constant></para>
+ <listitem><para>Configure kgdboc</para>
+ <para>Boot kernel with arguments:
+ <itemizedlist>
+ <listitem><para><constant>kgdboc=ttyS0,115200</constant></para></listitem>
+ </itemizedlist></para>
+ <para>OR</para>
+ <para>Configure kgdboc after the kernel booted:
+ <itemizedlist>
+ <listitem><para><constant>echo ttyS0 &gt; /sys/module/kgdboc/parameters/kgdboc</constant></para></listitem>
+ </itemizedlist></para>
</listitem>
- <listitem><para>Use sysfs before configuring an io driver</para>
- <para>
- <constant>echo 1 &gt; /sys/module/kgdb/parameters/kgdb_use_con</constant>
- </para>
- <para>
- NOTE: If you do this after you configure the kgdb I/O driver, the
- setting will not take effect until the next point the I/O is
- reconfigured.
- </para>
+ <listitem>
+ <para>Stop kernel execution (break into the debugger)</para>
+ <para>In order to connect to gdb via kgdboc, the kernel must
+ first be stopped. There are several ways to stop the kernel which
+ include using kgdbwait as a boot argument, via a sysrq-g, or running
+ the kernel until it takes an exception where it waits for the
+ debugger to attach.
+ <itemizedlist>
+ <listitem><para>When logged in as root or with a super user session you can run:</para>
+ <para><constant>echo g &gt; /proc/sysrq-trigger</constant></para></listitem>
+ <listitem><para>Example using minicom 2.2</para>
+ <para>Press: <constant>Control-a</constant></para>
+ <para>Press: <constant>f</constant></para>
+ <para>Press: <constant>g</constant></para>
</listitem>
- </orderedlist>
- </para>
- <para>
- IMPORTANT NOTE: Using this option with kgdb over the console
- (kgdboc) is not supported.
+ <listitem><para>When you have telneted to a terminal server that supports sending a remote break</para>
+ <para>Press: <constant>Control-]</constant></para>
+ <para>Type in:<constant>send break</constant></para>
+ <para>Press: <constant>Enter</constant></para>
+ <para>Press: <constant>g</constant></para>
+ </listitem>
+ </itemizedlist>
</para>
- </sect1>
- </chapter>
- <chapter id="ConnectingGDB">
- <title>Connecting gdb</title>
- <para>
- If you are using kgdboc, you need to have used kgdbwait as a boot
- argument, issued a sysrq-g, or the system you are going to debug
- has already taken an exception and is waiting for the debugger to
- attach before you can connect gdb.
- </para>
- <para>
- If you are not using different kgdb I/O driver other than kgdboc,
- you should be able to connect and the target will automatically
- respond.
- </para>
+ </listitem>
+ <listitem>
+ <para>Connect from from gdb</para>
<para>
- Example (using a serial port):
+ Example (using a directly connected port):
</para>
<programlisting>
% gdb ./vmlinux
@@ -266,7 +531,7 @@
(gdb) target remote /dev/ttyS0
</programlisting>
<para>
- Example (kgdb to a terminal server on tcp port 2012):
+ Example (kgdb to a terminal server on TCP port 2012):
</para>
<programlisting>
% gdb ./vmlinux
@@ -283,6 +548,83 @@
communications. You do this prior to issuing the <constant>target
remote</constant> command by typing in: <constant>set debug remote 1</constant>
</para>
+ </listitem>
+ </orderedlist>
+ <para>Remember if you continue in gdb, and need to "break in" again,
+ you need to issue an other sysrq-g. It is easy to create a simple
+ entry point by putting a breakpoint at <constant>sys_sync</constant>
+ and then you can run "sync" from a shell or script to break into the
+ debugger.</para>
+ </sect1>
+ </chapter>
+ <chapter id="switchKdbKgdb">
+ <title>kgdb and kdb interoperability</title>
+ <para>It is possible to transition between kdb and kgdb dynamically.
+ The debug core will remember which you used the last time and
+ automatically start in the same mode.</para>
+ <sect1>
+ <title>Switching between kdb and kgdb</title>
+ <sect2>
+ <title>Switching from kgdb to kdb</title>
+ <para>
+ There are two ways to switch from kgdb to kdb: you can use gdb to
+ issue a maintenance packet, or you can blindly type the command $3#33.
+ Whenever kernel debugger stops in kgdb mode it will print the
+ message <constant>KGDB or $3#33 for KDB</constant>. It is important
+ to note that you have to type the sequence correctly in one pass.
+ You cannot type a backspace or delete because kgdb will interpret
+ that as part of the debug stream.
+ <orderedlist>
+ <listitem><para>Change from kgdb to kdb by blindly typing:</para>
+ <para><constant>$3#33</constant></para></listitem>
+ <listitem><para>Change from kgdb to kdb with gdb</para>
+ <para><constant>maintenance packet 3</constant></para>
+ <para>NOTE: Now you must kill gdb. Typically you press control-z and
+ issue the command: kill -9 %</para></listitem>
+ </orderedlist>
+ </para>
+ </sect2>
+ <sect2>
+ <title>Change from kdb to kgdb</title>
+ <para>There are two ways you can change from kdb to kgdb. You can
+ manually enter kgdb mode by issuing the kgdb command from the kdb
+ shell prompt, or you can connect gdb while the kdb shell prompt is
+ active. The kdb shell looks for the typical first commands that gdb
+ would issue with the gdb remote protocol and if it sees one of those
+ commands it automatically changes into kgdb mode.</para>
+ <orderedlist>
+ <listitem><para>From kdb issue the command:</para>
+ <para><constant>kgdb</constant></para>
+ <para>Now disconnect your terminal program and connect gdb in its place</para></listitem>
+ <listitem><para>At the kdb prompt, disconnect the terminal program and connect gdb in its place.</para></listitem>
+ </orderedlist>
+ </sect2>
+ </sect1>
+ <sect1>
+ <title>Running kdb commands from gdb</title>
+ <para>It is possible to run a limited set of kdb commands from gdb,
+ using the gdb monitor command. You don't want to execute any of the
+ run control or breakpoint operations, because it can disrupt the
+ state of the kernel debugger. You should be using gdb for
+ breakpoints and run control operations if you have gdb connected.
+ The more useful commands to run are things like lsmod, dmesg, ps or
+ possibly some of the memory information commands. To see all the kdb
+ commands you can run <constant>monitor help</constant>.</para>
+ <para>Example:
+ <informalexample><programlisting>
+(gdb) monitor ps
+1 idle process (state I) and
+27 sleeping system daemon (state M) processes suppressed,
+use 'ps A' to see all.
+Task Addr Pid Parent [*] cpu State Thread Command
+
+0xc78291d0 1 0 0 0 S 0xc7829404 init
+0xc7954150 942 1 0 0 S 0xc7954384 dropbear
+0xc78789c0 944 1 0 0 S 0xc7878bf4 sh
+(gdb)
+ </programlisting></informalexample>
+ </para>
+ </sect1>
</chapter>
<chapter id="KGDBTestSuite">
<title>kgdb Test Suite</title>
@@ -309,34 +651,38 @@
</para>
</chapter>
<chapter id="CommonBackEndReq">
- <title>KGDB Internals</title>
+ <title>Kernel Debugger Internals</title>
<sect1 id="kgdbArchitecture">
<title>Architecture Specifics</title>
<para>
- Kgdb is organized into three basic components:
+ The kernel debugger is organized into a number of components:
<orderedlist>
- <listitem><para>kgdb core</para>
+ <listitem><para>The debug core</para>
<para>
- The kgdb core is found in kernel/kgdb.c. It contains:
+ The debug core is found in kernel/debugger/debug_core.c. It contains:
<itemizedlist>
- <listitem><para>All the logic to implement the gdb serial protocol</para></listitem>
- <listitem><para>A generic OS exception handler which includes sync'ing the processors into a stopped state on an multi cpu system.</para></listitem>
+ <listitem><para>A generic OS exception handler which includes
+ sync'ing the processors into a stopped state on an multi-CPU
+ system.</para></listitem>
<listitem><para>The API to talk to the kgdb I/O drivers</para></listitem>
- <listitem><para>The API to make calls to the arch specific kgdb implementation</para></listitem>
+ <listitem><para>The API to make calls to the arch-specific kgdb implementation</para></listitem>
<listitem><para>The logic to perform safe memory reads and writes to memory while using the debugger</para></listitem>
<listitem><para>A full implementation for software breakpoints unless overridden by the arch</para></listitem>
+ <listitem><para>The API to invoke either the kdb or kgdb frontend to the debug core.</para></listitem>
+ <listitem><para>The structures and callback API for atomic kernel mode setting.</para>
+ <para>NOTE: kgdboc is where the kms callbacks are invoked.</para></listitem>
</itemizedlist>
</para>
</listitem>
- <listitem><para>kgdb arch specific implementation</para>
+ <listitem><para>kgdb arch-specific implementation</para>
<para>
This implementation is generally found in arch/*/kernel/kgdb.c.
As an example, arch/x86/kernel/kgdb.c contains the specifics to
implement HW breakpoint as well as the initialization to
dynamically register and unregister for the trap handlers on
- this architecture. The arch specific portion implements:
+ this architecture. The arch-specific portion implements:
<itemizedlist>
- <listitem><para>contains an arch specific trap catcher which
+ <listitem><para>contains an arch-specific trap catcher which
invokes kgdb_handle_exception() to start kgdb about doing its
work</para></listitem>
<listitem><para>translation to and from gdb specific packet format to pt_regs</para></listitem>
@@ -347,11 +693,35 @@
</itemizedlist>
</para>
</listitem>
+ <listitem><para>gdbstub frontend (aka kgdb)</para>
+ <para>The gdbstub is located in kernel/debug/gdbstub.c. It contains:</para>
+ <itemizedlist>
+ <listitem><para>All the logic to implement the gdb serial protocol</para></listitem>
+ </itemizedlist>
+ </listitem>
+ <listitem><para>kdb frontend</para>
+ <para>The kdb debugger shell is broken down into a number of
+ components. The kdb core is located in kernel/debug/kdb. There
+ are a number of helper functions in some of the other kernel
+ components to make it possible for kdb to examine and report
+ information about the kernel without taking locks that could
+ cause a kernel deadlock. The kdb core contains implements the following functionality.</para>
+ <itemizedlist>
+ <listitem><para>A simple shell</para></listitem>
+ <listitem><para>The kdb core command set</para></listitem>
+ <listitem><para>A registration API to register additional kdb shell commands.</para>
+ <para>A good example of a self-contained kdb module is the "ftdump" command for dumping the ftrace buffer. See: kernel/trace/trace_kdb.c</para></listitem>
+ <listitem><para>The implementation for kdb_printf() which
+ emits messages directly to I/O drivers, bypassing the kernel
+ log.</para></listitem>
+ <listitem><para>SW / HW breakpoint management for the kdb shell</para></listitem>
+ </itemizedlist>
+ </listitem>
<listitem><para>kgdb I/O driver</para>
<para>
- Each kgdb I/O driver has to provide an implemenation for the following:
+ Each kgdb I/O driver has to provide an implementation for the following:
<itemizedlist>
- <listitem><para>configuration via builtin or module</para></listitem>
+ <listitem><para>configuration via built-in or module</para></listitem>
<listitem><para>dynamic configuration and kgdb hook registration calls</para></listitem>
<listitem><para>read and write character interface</para></listitem>
<listitem><para>A cleanup handler for unconfiguring from the kgdb core</para></listitem>
@@ -411,20 +781,19 @@
</sect1>
<sect1 id="kgdbocDesign">
<title>kgdboc internals</title>
+ <sect2>
+ <title>kgdboc and uarts</title>
<para>
The kgdboc driver is actually a very thin driver that relies on the
underlying low level to the hardware driver having "polling hooks"
which the to which the tty driver is attached. In the initial
implementation of kgdboc it the serial_core was changed to expose a
- low level uart hook for doing polled mode reading and writing of a
+ low level UART hook for doing polled mode reading and writing of a
single character while in an atomic context. When kgdb makes an I/O
- request to the debugger, kgdboc invokes a call back in the serial
- core which in turn uses the call back in the uart driver. It is
- certainly possible to extend kgdboc to work with non-uart based
- consoles in the future.
- </para>
+ request to the debugger, kgdboc invokes a callback in the serial
+ core which in turn uses the callback in the UART driver.</para>
<para>
- When using kgdboc with a uart, the uart driver must implement two callbacks in the <constant>struct uart_ops</constant>. Example from drivers/8250.c:<programlisting>
+ When using kgdboc with a UART, the UART driver must implement two callbacks in the <constant>struct uart_ops</constant>. Example from drivers/8250.c:<programlisting>
#ifdef CONFIG_CONSOLE_POLL
.poll_get_char = serial8250_get_poll_char,
.poll_put_char = serial8250_put_poll_char,
@@ -434,11 +803,70 @@
<constant>#ifdef CONFIG_CONSOLE_POLL</constant>, as shown above.
Keep in mind that polling hooks have to be implemented in such a way
that they can be called from an atomic context and have to restore
- the state of the uart chip on return such that the system can return
+ the state of the UART chip on return such that the system can return
to normal when the debugger detaches. You need to be very careful
- with any kind of lock you consider, because failing here is most
+ with any kind of lock you consider, because failing here is most likely
going to mean pressing the reset button.
</para>
+ </sect2>
+ <sect2 id="kgdbocKbd">
+ <title>kgdboc and keyboards</title>
+ <para>The kgdboc driver contains logic to configure communications
+ with an attached keyboard. The keyboard infrastructure is only
+ compiled into the kernel when CONFIG_KDB_KEYBOARD=y is set in the
+ kernel configuration.</para>
+ <para>The core polled keyboard driver driver for PS/2 type keyboards
+ is in drivers/char/kdb_keyboard.c. This driver is hooked into the
+ debug core when kgdboc populates the callback in the array
+ called <constant>kdb_poll_funcs[]</constant>. The
+ kdb_get_kbd_char() is the top-level function which polls hardware
+ for single character input.
+ </para>
+ </sect2>
+ <sect2 id="kgdbocKms">
+ <title>kgdboc and kms</title>
+ <para>The kgdboc driver contains logic to request the graphics
+ display to switch to a text context when you are using
+ "kgdboc=kms,kbd", provided that you have a video driver which has a
+ frame buffer console and atomic kernel mode setting support.</para>
+ <para>
+ Every time the kernel
+ debugger is entered it calls kgdboc_pre_exp_handler() which in turn
+ calls con_debug_enter() in the virtual console layer. On resuming kernel
+ execution, the kernel debugger calls kgdboc_post_exp_handler() which
+ in turn calls con_debug_leave().</para>
+ <para>Any video driver that wants to be compatible with the kernel
+ debugger and the atomic kms callbacks must implement the
+ mode_set_base_atomic, fb_debug_enter and fb_debug_leave operations.
+ For the fb_debug_enter and fb_debug_leave the option exists to use
+ the generic drm fb helper functions or implement something custom for
+ the hardware. The following example shows the initialization of the
+ .mode_set_base_atomic operation in
+ drivers/gpu/drm/i915/intel_display.c:
+ <informalexample>
+ <programlisting>
+static const struct drm_crtc_helper_funcs intel_helper_funcs = {
+[...]
+ .mode_set_base_atomic = intel_pipe_set_base_atomic,
+[...]
+};
+ </programlisting>
+ </informalexample>
+ </para>
+ <para>Here is an example of how the i915 driver initializes the fb_debug_enter and fb_debug_leave functions to use the generic drm helpers in
+ drivers/gpu/drm/i915/intel_fb.c:
+ <informalexample>
+ <programlisting>
+static struct fb_ops intelfb_ops = {
+[...]
+ .fb_debug_enter = drm_fb_helper_debug_enter,
+ .fb_debug_leave = drm_fb_helper_debug_leave,
+[...]
+};
+ </programlisting>
+ </informalexample>
+ </para>
+ </sect2>
</sect1>
</chapter>
<chapter id="credits">
@@ -453,6 +881,10 @@
<itemizedlist>
<listitem><para>Jason Wessel<email>jason.wessel@windriver.com</email></para></listitem>
</itemizedlist>
+ In Jan 2010 this document was updated to include kdb.
+ <itemizedlist>
+ <listitem><para>Jason Wessel<email>jason.wessel@windriver.com</email></para></listitem>
+ </itemizedlist>
</para>
</chapter>
</book>
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index ba997577150..8c5411cfeaf 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -81,16 +81,14 @@ void (*port_disable) (struct ata_port *);
</programlisting>
<para>
- Called from ata_bus_probe() and ata_bus_reset() error paths,
- as well as when unregistering from the SCSI module (rmmod, hot
- unplug).
+ Called from ata_bus_probe() error path, as well as when
+ unregistering from the SCSI module (rmmod, hot unplug).
This function should do whatever needs to be done to take the
port out of use. In most cases, ata_port_disable() can be used
as this hook.
</para>
<para>
Called from ata_bus_probe() on a failed probe.
- Called from ata_bus_reset() on a failed bus reset.
Called from ata_scsi_release().
</para>
@@ -107,10 +105,6 @@ void (*dev_config) (struct ata_port *, struct ata_device *);
issue of SET FEATURES - XFER MODE, and prior to operation.
</para>
<para>
- Called by ata_device_add() after ata_dev_identify() determines
- a device is present.
- </para>
- <para>
This entry may be specified as NULL in ata_port_operations.
</para>
@@ -154,8 +148,8 @@ unsigned int (*mode_filter) (struct ata_port *, struct ata_device *, unsigned in
<sect2><title>Taskfile read/write</title>
<programlisting>
-void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
-void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
</programlisting>
<para>
@@ -164,36 +158,35 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
hardware registers / DMA buffers, to obtain the current set of
taskfile register values.
Most drivers for taskfile-based hardware (PIO or MMIO) use
- ata_tf_load() and ata_tf_read() for these hooks.
+ ata_sff_tf_load() and ata_sff_tf_read() for these hooks.
</para>
</sect2>
<sect2><title>PIO data read/write</title>
<programlisting>
-void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
+void (*sff_data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
</programlisting>
<para>
All bmdma-style drivers must implement this hook. This is the low-level
operation that actually copies the data bytes during a PIO data
transfer.
-Typically the driver
-will choose one of ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), or
-ata_mmio_data_xfer().
+Typically the driver will choose one of ata_sff_data_xfer_noirq(),
+ata_sff_data_xfer(), or ata_sff_data_xfer32().
</para>
</sect2>
<sect2><title>ATA command execute</title>
<programlisting>
-void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
</programlisting>
<para>
causes an ATA command, previously loaded with
->tf_load(), to be initiated in hardware.
- Most drivers for taskfile-based hardware use ata_exec_command()
+ Most drivers for taskfile-based hardware use ata_sff_exec_command()
for this hook.
</para>
@@ -218,8 +211,8 @@ command.
<sect2><title>Read specific ATA shadow registers</title>
<programlisting>
-u8 (*check_status)(struct ata_port *ap);
-u8 (*check_altstatus)(struct ata_port *ap);
+u8 (*sff_check_status)(struct ata_port *ap);
+u8 (*sff_check_altstatus)(struct ata_port *ap);
</programlisting>
<para>
@@ -227,20 +220,26 @@ u8 (*check_altstatus)(struct ata_port *ap);
hardware. On some hardware, reading the Status register has
the side effect of clearing the interrupt condition.
Most drivers for taskfile-based hardware use
- ata_check_status() for this hook.
+ ata_sff_check_status() for this hook.
</para>
+
+ </sect2>
+
+ <sect2><title>Write specific ATA shadow register</title>
+ <programlisting>
+void (*sff_set_devctl)(struct ata_port *ap, u8 ctl);
+ </programlisting>
+
<para>
- Note that because this is called from ata_device_add(), at
- least a dummy function that clears device interrupts must be
- provided for all drivers, even if the controller doesn't
- actually have a taskfile status register.
+ Write the device control ATA shadow register to the hardware.
+ Most drivers don't need to define this.
</para>
</sect2>
<sect2><title>Select ATA device on bus</title>
<programlisting>
-void (*dev_select)(struct ata_port *ap, unsigned int device);
+void (*sff_dev_select)(struct ata_port *ap, unsigned int device);
</programlisting>
<para>
@@ -251,9 +250,7 @@ void (*dev_select)(struct ata_port *ap, unsigned int device);
</para>
<para>
Most drivers for taskfile-based hardware use
- ata_std_dev_select() for this hook. Controllers which do not
- support second drives on a port (such as SATA contollers) will
- use ata_noop_dev_select().
+ ata_sff_dev_select() for this hook.
</para>
</sect2>
@@ -441,13 +438,13 @@ void (*irq_clear) (struct ata_port *);
to struct ata_host_set.
</para>
<para>
- Most legacy IDE drivers use ata_interrupt() for the
+ Most legacy IDE drivers use ata_sff_interrupt() for the
irq_handler hook, which scans all ports in the host_set,
determines which queued command was active (if any), and calls
- ata_host_intr(ap,qc).
+ ata_sff_host_intr(ap,qc).
</para>
<para>
- Most legacy IDE drivers use ata_bmdma_irq_clear() for the
+ Most legacy IDE drivers use ata_sff_irq_clear() for the
irq_clear() hook, which simply clears the interrupt and error
flags in the DMA status register.
</para>
@@ -490,16 +487,12 @@ void (*host_stop) (struct ata_host_set *host_set);
allocates space for a legacy IDE PRD table and returns.
</para>
<para>
- ->port_stop() is called after ->host_stop(). It's sole function
+ ->port_stop() is called after ->host_stop(). Its sole function
is to release DMA/memory resources, now that they are no longer
actively being used. Many drivers also free driver-private
data from port at this time.
</para>
<para>
- Many drivers use ata_port_stop() as this hook, which frees the
- PRD table.
- </para>
- <para>
->host_stop() is called after all ->port_stop() calls
have completed. The hook must finalize hardware shutdown, release DMA
and other resources, etc.
diff --git a/Documentation/DocBook/mac80211.tmpl b/Documentation/DocBook/mac80211.tmpl
index f3f37f141db..affb15a344a 100644
--- a/Documentation/DocBook/mac80211.tmpl
+++ b/Documentation/DocBook/mac80211.tmpl
@@ -144,7 +144,7 @@ usage should require reading the full document.
this though and the recommendation to allow only a single
interface in STA mode at first!
</para>
-!Finclude/net/mac80211.h ieee80211_if_init_conf
+!Finclude/net/mac80211.h ieee80211_vif
</chapter>
<chapter id="rx-tx">
@@ -234,7 +234,6 @@ usage should require reading the full document.
<title>Multiple queues and QoS support</title>
<para>TBD</para>
!Finclude/net/mac80211.h ieee80211_tx_queue_params
-!Finclude/net/mac80211.h ieee80211_tx_queue_stats
</chapter>
<chapter id="AP">
diff --git a/Documentation/DocBook/media-entities.tmpl b/Documentation/DocBook/media-entities.tmpl
index c725cb852c5..6ae97157b1c 100644
--- a/Documentation/DocBook/media-entities.tmpl
+++ b/Documentation/DocBook/media-entities.tmpl
@@ -17,6 +17,7 @@
<!ENTITY VIDIOC-DBG-G-REGISTER "<link linkend='vidioc-dbg-g-register'><constant>VIDIOC_DBG_G_REGISTER</constant></link>">
<!ENTITY VIDIOC-DBG-S-REGISTER "<link linkend='vidioc-dbg-g-register'><constant>VIDIOC_DBG_S_REGISTER</constant></link>">
<!ENTITY VIDIOC-DQBUF "<link linkend='vidioc-qbuf'><constant>VIDIOC_DQBUF</constant></link>">
+<!ENTITY VIDIOC-DQEVENT "<link linkend='vidioc-dqevent'><constant>VIDIOC_DQEVENT</constant></link>">
<!ENTITY VIDIOC-ENCODER-CMD "<link linkend='vidioc-encoder-cmd'><constant>VIDIOC_ENCODER_CMD</constant></link>">
<!ENTITY VIDIOC-ENUMAUDIO "<link linkend='vidioc-enumaudio'><constant>VIDIOC_ENUMAUDIO</constant></link>">
<!ENTITY VIDIOC-ENUMAUDOUT "<link linkend='vidioc-enumaudioout'><constant>VIDIOC_ENUMAUDOUT</constant></link>">
@@ -60,6 +61,7 @@
<!ENTITY VIDIOC-REQBUFS "<link linkend='vidioc-reqbufs'><constant>VIDIOC_REQBUFS</constant></link>">
<!ENTITY VIDIOC-STREAMOFF "<link linkend='vidioc-streamon'><constant>VIDIOC_STREAMOFF</constant></link>">
<!ENTITY VIDIOC-STREAMON "<link linkend='vidioc-streamon'><constant>VIDIOC_STREAMON</constant></link>">
+<!ENTITY VIDIOC-SUBSCRIBE-EVENT "<link linkend='vidioc-subscribe-event'><constant>VIDIOC_SUBSCRIBE_EVENT</constant></link>">
<!ENTITY VIDIOC-S-AUDIO "<link linkend='vidioc-g-audio'><constant>VIDIOC_S_AUDIO</constant></link>">
<!ENTITY VIDIOC-S-AUDOUT "<link linkend='vidioc-g-audioout'><constant>VIDIOC_S_AUDOUT</constant></link>">
<!ENTITY VIDIOC-S-CROP "<link linkend='vidioc-g-crop'><constant>VIDIOC_S_CROP</constant></link>">
@@ -83,6 +85,7 @@
<!ENTITY VIDIOC-TRY-ENCODER-CMD "<link linkend='vidioc-encoder-cmd'><constant>VIDIOC_TRY_ENCODER_CMD</constant></link>">
<!ENTITY VIDIOC-TRY-EXT-CTRLS "<link linkend='vidioc-g-ext-ctrls'><constant>VIDIOC_TRY_EXT_CTRLS</constant></link>">
<!ENTITY VIDIOC-TRY-FMT "<link linkend='vidioc-g-fmt'><constant>VIDIOC_TRY_FMT</constant></link>">
+<!ENTITY VIDIOC-UNSUBSCRIBE-EVENT "<link linkend='vidioc-subscribe-event'><constant>VIDIOC_UNSUBSCRIBE_EVENT</constant></link>">
<!-- Types -->
<!ENTITY v4l2-std-id "<link linkend='v4l2-std-id'>v4l2_std_id</link>">
@@ -141,6 +144,9 @@
<!ENTITY v4l2-enc-idx "struct&nbsp;<link linkend='v4l2-enc-idx'>v4l2_enc_idx</link>">
<!ENTITY v4l2-enc-idx-entry "struct&nbsp;<link linkend='v4l2-enc-idx-entry'>v4l2_enc_idx_entry</link>">
<!ENTITY v4l2-encoder-cmd "struct&nbsp;<link linkend='v4l2-encoder-cmd'>v4l2_encoder_cmd</link>">
+<!ENTITY v4l2-event "struct&nbsp;<link linkend='v4l2-event'>v4l2_event</link>">
+<!ENTITY v4l2-event-subscription "struct&nbsp;<link linkend='v4l2-event-subscription'>v4l2_event_subscription</link>">
+<!ENTITY v4l2-event-vsync "struct&nbsp;<link linkend='v4l2-event-vsync'>v4l2_event_vsync</link>">
<!ENTITY v4l2-ext-control "struct&nbsp;<link linkend='v4l2-ext-control'>v4l2_ext_control</link>">
<!ENTITY v4l2-ext-controls "struct&nbsp;<link linkend='v4l2-ext-controls'>v4l2_ext_controls</link>">
<!ENTITY v4l2-fmtdesc "struct&nbsp;<link linkend='v4l2-fmtdesc'>v4l2_fmtdesc</link>">
@@ -200,6 +206,7 @@
<!ENTITY sub-controls SYSTEM "v4l/controls.xml">
<!ENTITY sub-dev-capture SYSTEM "v4l/dev-capture.xml">
<!ENTITY sub-dev-codec SYSTEM "v4l/dev-codec.xml">
+<!ENTITY sub-dev-event SYSTEM "v4l/dev-event.xml">
<!ENTITY sub-dev-effect SYSTEM "v4l/dev-effect.xml">
<!ENTITY sub-dev-osd SYSTEM "v4l/dev-osd.xml">
<!ENTITY sub-dev-output SYSTEM "v4l/dev-output.xml">
@@ -211,6 +218,7 @@
<!ENTITY sub-dev-teletext SYSTEM "v4l/dev-teletext.xml">
<!ENTITY sub-driver SYSTEM "v4l/driver.xml">
<!ENTITY sub-libv4l SYSTEM "v4l/libv4l.xml">
+<!ENTITY sub-lirc_device_interface SYSTEM "v4l/lirc_device_interface.xml">
<!ENTITY sub-remote_controllers SYSTEM "v4l/remote_controllers.xml">
<!ENTITY sub-fdl-appendix SYSTEM "v4l/fdl-appendix.xml">
<!ENTITY sub-close SYSTEM "v4l/func-close.xml">
@@ -292,6 +300,8 @@
<!ENTITY sub-v4l2grab-c SYSTEM "v4l/v4l2grab.c.xml">
<!ENTITY sub-videodev2-h SYSTEM "v4l/videodev2.h.xml">
<!ENTITY sub-v4l2 SYSTEM "v4l/v4l2.xml">
+<!ENTITY sub-dqevent SYSTEM "v4l/vidioc-dqevent.xml">
+<!ENTITY sub-subscribe-event SYSTEM "v4l/vidioc-subscribe-event.xml">
<!ENTITY sub-intro SYSTEM "dvb/intro.xml">
<!ENTITY sub-frontend SYSTEM "dvb/frontend.xml">
<!ENTITY sub-dvbproperty SYSTEM "dvb/dvbproperty.xml">
@@ -381,3 +391,5 @@
<!ENTITY reqbufs SYSTEM "v4l/vidioc-reqbufs.xml">
<!ENTITY s-hw-freq-seek SYSTEM "v4l/vidioc-s-hw-freq-seek.xml">
<!ENTITY streamon SYSTEM "v4l/vidioc-streamon.xml">
+<!ENTITY dqevent SYSTEM "v4l/vidioc-dqevent.xml">
+<!ENTITY subscribe_event SYSTEM "v4l/vidioc-subscribe-event.xml">
diff --git a/Documentation/DocBook/media.tmpl b/Documentation/DocBook/media.tmpl
index eea564bb12c..f11048d4053 100644
--- a/Documentation/DocBook/media.tmpl
+++ b/Documentation/DocBook/media.tmpl
@@ -28,7 +28,7 @@
<title>LINUX MEDIA INFRASTRUCTURE API</title>
<copyright>
- <year>2009</year>
+ <year>2009-2010</year>
<holder>LinuxTV Developers</holder>
</copyright>
@@ -61,7 +61,7 @@ Foundation. A copy of the license is included in the chapter entitled
in fact it covers several different video standards including
DVB-T, DVB-S, DVB-C and ATSC. The API is currently being updated
to documment support also for DVB-S2, ISDB-T and ISDB-S.</para>
- <para>The third part covers other API's used by all media infrastructure devices</para>
+ <para>The third part covers Remote Controller API</para>
<para>For additional information and for the latest development code,
see: <ulink url="http://linuxtv.org">http://linuxtv.org</ulink>.</para>
<para>For discussing improvements, reporting troubles, sending new drivers, etc, please mail to: <ulink url="http://vger.kernel.org/vger-lists.html#linux-media">Linux Media Mailing List (LMML).</ulink>.</para>
@@ -86,7 +86,7 @@ Foundation. A copy of the license is included in the chapter entitled
</author>
</authorgroup>
<copyright>
- <year>2009</year>
+ <year>2009-2010</year>
<holder>Mauro Carvalho Chehab</holder>
</copyright>
@@ -101,7 +101,7 @@ Foundation. A copy of the license is included in the chapter entitled
</revhistory>
</partinfo>
-<title>Other API's used by media infrastructure drivers</title>
+<title>Remote Controller API</title>
<chapter id="remote_controllers">
&sub-remote_controllers;
</chapter>
diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl
index 5e7d84b4850..020ac80d468 100644
--- a/Documentation/DocBook/mtdnand.tmpl
+++ b/Documentation/DocBook/mtdnand.tmpl
@@ -269,7 +269,7 @@ static void board_hwcontrol(struct mtd_info *mtd, int cmd)
information about the device.
</para>
<programlisting>
-int __init board_init (void)
+static int __init board_init (void)
{
struct nand_chip *this;
int err = 0;
@@ -488,7 +488,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
The ECC bytes must be placed immidiately after the data
bytes in order to make the syndrome generator work. This
is contrary to the usual layout used by software ECC. The
- seperation of data and out of band area is not longer
+ separation of data and out of band area is not longer
possible. The nand driver code handles this layout and
the remaining free bytes in the oob area are managed by
the autoplacement code. Provide a matching oob-layout
@@ -560,7 +560,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
bad blocks. They have factory marked good blocks. The marker pattern
is erased when the block is erased to be reused. So in case of
powerloss before writing the pattern back to the chip this block
- would be lost and added to the bad blocks. Therefor we scan the
+ would be lost and added to the bad blocks. Therefore we scan the
chip(s) when we detect them the first time for good blocks and
store this information in a bad block table before erasing any
of the blocks.
@@ -1094,7 +1094,7 @@ in this page</entry>
manufacturers specifications. This applies similar to the spare area.
</para>
<para>
- Therefor NAND aware filesystems must either write in page size chunks
+ Therefore NAND aware filesystems must either write in page size chunks
or hold a writebuffer to collect smaller writes until they sum up to
pagesize. Available NAND aware filesystems: JFFS2, YAFFS.
</para>
diff --git a/Documentation/DocBook/scsi.tmpl b/Documentation/DocBook/scsi.tmpl
index d87f4569e76..324b53494f0 100644
--- a/Documentation/DocBook/scsi.tmpl
+++ b/Documentation/DocBook/scsi.tmpl
@@ -393,7 +393,7 @@
</para>
<para>
For documentation see
- <ulink url='http://www.torque.net/sg/sdebug26.html'>http://www.torque.net/sg/sdebug26.html</ulink>
+ <ulink url='http://sg.danny.cz/sg/sdebug26.html'>http://sg.danny.cz/sg/sdebug26.html</ulink>
</para>
<!-- !Edrivers/scsi/scsi_debug.c -->
</sect2>
diff --git a/Documentation/DocBook/sh.tmpl b/Documentation/DocBook/sh.tmpl
index 0c3dc4c69dd..d858d92cf6d 100644
--- a/Documentation/DocBook/sh.tmpl
+++ b/Documentation/DocBook/sh.tmpl
@@ -19,13 +19,17 @@
</authorgroup>
<copyright>
- <year>2008</year>
+ <year>2008-2010</year>
<holder>Paul Mundt</holder>
</copyright>
<copyright>
- <year>2008</year>
+ <year>2008-2010</year>
<holder>Renesas Technology Corp.</holder>
</copyright>
+ <copyright>
+ <year>2010</year>
+ <holder>Renesas Electronics Corp.</holder>
+ </copyright>
<legalnotice>
<para>
@@ -77,7 +81,7 @@
</chapter>
<chapter id="clk">
<title>Clock Framework Extensions</title>
-!Iarch/sh/include/asm/clock.h
+!Iinclude/linux/sh_clk.h
</chapter>
<chapter id="mach">
<title>Machine Specific Interfaces</title>
diff --git a/Documentation/DocBook/stylesheet.xsl b/Documentation/DocBook/stylesheet.xsl
index 254c1d5d2e5..85b25275196 100644
--- a/Documentation/DocBook/stylesheet.xsl
+++ b/Documentation/DocBook/stylesheet.xsl
@@ -6,4 +6,5 @@
<param name="callout.graphics">0</param>
<!-- <param name="paper.type">A4</param> -->
<param name="generate.section.toc.level">2</param>
+<param name="use.id.as.filename">1</param>
</stylesheet>
diff --git a/Documentation/DocBook/tracepoint.tmpl b/Documentation/DocBook/tracepoint.tmpl
index 8bca1d5cec0..b57a9ede322 100644
--- a/Documentation/DocBook/tracepoint.tmpl
+++ b/Documentation/DocBook/tracepoint.tmpl
@@ -16,6 +16,15 @@
</address>
</affiliation>
</author>
+ <author>
+ <firstname>William</firstname>
+ <surname>Cohen</surname>
+ <affiliation>
+ <address>
+ <email>wcohen@redhat.com</email>
+ </address>
+ </affiliation>
+ </author>
</authorgroup>
<legalnotice>
@@ -91,4 +100,13 @@
!Iinclude/trace/events/signal.h
</chapter>
+ <chapter id="block">
+ <title>Block IO</title>
+!Iinclude/trace/events/block.h
+ </chapter>
+
+ <chapter id="workqueue">
+ <title>Workqueue</title>
+!Iinclude/trace/events/workqueue.h
+ </chapter>
</book>
diff --git a/Documentation/DocBook/v4l/common.xml b/Documentation/DocBook/v4l/common.xml
index c65f0ac9b6e..cea23e1c4fc 100644
--- a/Documentation/DocBook/v4l/common.xml
+++ b/Documentation/DocBook/v4l/common.xml
@@ -1170,7 +1170,7 @@ frames per second. If less than this number of frames is to be
captured or output, applications can request frame skipping or
duplicating on the driver side. This is especially useful when using
the &func-read; or &func-write;, which are not augmented by timestamps
-or sequence counters, and to avoid unneccessary data copying.</para>
+or sequence counters, and to avoid unnecessary data copying.</para>
<para>Finally these ioctls can be used to determine the number of
buffers used internally by a driver in read/write mode. For
diff --git a/Documentation/DocBook/v4l/compat.xml b/Documentation/DocBook/v4l/compat.xml
index b9dbdf9e6d2..54447f0d078 100644
--- a/Documentation/DocBook/v4l/compat.xml
+++ b/Documentation/DocBook/v4l/compat.xml
@@ -1091,8 +1091,9 @@ signed 64-bit integer. Output devices should not send a buffer out
until the time in the timestamp field has arrived. I would like to
follow SGI's lead, and adopt a multimedia timestamping system like
their UST (Unadjusted System Time). See
-http://reality.sgi.com/cpirazzi_engr/lg/time/intro.html. [This link is
-no longer valid.] UST uses timestamps that are 64-bit signed integers
+http://web.archive.org/web/*/http://reality.sgi.com
+/cpirazzi_engr/lg/time/intro.html.
+UST uses timestamps that are 64-bit signed integers
(not struct timeval's) and given in nanosecond units. The UST clock
starts at zero when the system is booted and runs continuously and
uniformly. It takes a little over 292 years for UST to overflow. There
@@ -2332,15 +2333,26 @@ more information.</para>
</listitem>
</orderedlist>
</section>
- </section>
+ <section>
+ <title>V4L2 in Linux 2.6.34</title>
+ <orderedlist>
+ <listitem>
+ <para>Added
+<constant>V4L2_CID_IRIS_ABSOLUTE</constant> and
+<constant>V4L2_CID_IRIS_RELATIVE</constant> controls to the
+ <link linkend="camera-controls">Camera controls class</link>.
+ </para>
+ </listitem>
+ </orderedlist>
+ </section>
- <section id="other">
- <title>Relation of V4L2 to other Linux multimedia APIs</title>
+ <section id="other">
+ <title>Relation of V4L2 to other Linux multimedia APIs</title>
- <section id="xvideo">
- <title>X Video Extension</title>
+ <section id="xvideo">
+ <title>X Video Extension</title>
- <para>The X Video Extension (abbreviated XVideo or just Xv) is
+ <para>The X Video Extension (abbreviated XVideo or just Xv) is
an extension of the X Window system, implemented for example by the
XFree86 project. Its scope is similar to V4L2, an API to video capture
and output devices for X clients. Xv allows applications to display
@@ -2351,7 +2363,7 @@ capture or output still images in XPixmaps<footnote>
extension available across many operating systems and
architectures.</para>
- <para>Because the driver is embedded into the X server Xv has a
+ <para>Because the driver is embedded into the X server Xv has a
number of advantages over the V4L2 <link linkend="overlay">video
overlay interface</link>. The driver can easily determine the overlay
target, &ie; visible graphics memory or off-screen buffers for a
@@ -2360,16 +2372,16 @@ overlay, scaling or color-keying, or the clipping functions of the
video capture hardware, always in sync with drawing operations or
windows moving or changing their stacking order.</para>
- <para>To combine the advantages of Xv and V4L a special Xv
+ <para>To combine the advantages of Xv and V4L a special Xv
driver exists in XFree86 and XOrg, just programming any overlay capable
Video4Linux device it finds. To enable it
<filename>/etc/X11/XF86Config</filename> must contain these lines:</para>
- <para><screen>
+ <para><screen>
Section "Module"
Load "v4l"
EndSection</screen></para>
- <para>As of XFree86 4.2 this driver still supports only V4L
+ <para>As of XFree86 4.2 this driver still supports only V4L
ioctls, however it should work just fine with all V4L2 devices through
the V4L2 backward-compatibility layer. Since V4L2 permits multiple
opens it is possible (if supported by the V4L2 driver) to capture
@@ -2377,83 +2389,84 @@ video while an X client requested video overlay. Restrictions of
simultaneous capturing and overlay are discussed in <xref
linkend="overlay" /> apply.</para>
- <para>Only marginally related to V4L2, XFree86 extended Xv to
+ <para>Only marginally related to V4L2, XFree86 extended Xv to
support hardware YUV to RGB conversion and scaling for faster video
playback, and added an interface to MPEG-2 decoding hardware. This API
is useful to display images captured with V4L2 devices.</para>
- </section>
+ </section>
- <section>
- <title>Digital Video</title>
+ <section>
+ <title>Digital Video</title>
- <para>V4L2 does not support digital terrestrial, cable or
+ <para>V4L2 does not support digital terrestrial, cable or
satellite broadcast. A separate project aiming at digital receivers
exists. You can find its homepage at <ulink
url="http://linuxtv.org">http://linuxtv.org</ulink>. The Linux DVB API
has no connection to the V4L2 API except that drivers for hybrid
hardware may support both.</para>
- </section>
+ </section>
- <section>
- <title>Audio Interfaces</title>
+ <section>
+ <title>Audio Interfaces</title>
- <para>[to do - OSS/ALSA]</para>
+ <para>[to do - OSS/ALSA]</para>
+ </section>
</section>
- </section>
- <section id="experimental">
- <title>Experimental API Elements</title>
+ <section id="experimental">
+ <title>Experimental API Elements</title>
- <para>The following V4L2 API elements are currently experimental
+ <para>The following V4L2 API elements are currently experimental
and may change in the future.</para>
- <itemizedlist>
- <listitem>
- <para>Video Output Overlay (OSD) Interface, <xref
+ <itemizedlist>
+ <listitem>
+ <para>Video Output Overlay (OSD) Interface, <xref
linkend="osd" />.</para>
- </listitem>
+ </listitem>
<listitem>
- <para><constant>V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY</constant>,
+ <para><constant>V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY</constant>,
&v4l2-buf-type;, <xref linkend="v4l2-buf-type" />.</para>
- </listitem>
- <listitem>
- <para><constant>V4L2_CAP_VIDEO_OUTPUT_OVERLAY</constant>,
+ </listitem>
+ <listitem>
+ <para><constant>V4L2_CAP_VIDEO_OUTPUT_OVERLAY</constant>,
&VIDIOC-QUERYCAP; ioctl, <xref linkend="device-capabilities" />.</para>
- </listitem>
- <listitem>
- <para>&VIDIOC-ENUM-FRAMESIZES; and
+ </listitem>
+ <listitem>
+ <para>&VIDIOC-ENUM-FRAMESIZES; and
&VIDIOC-ENUM-FRAMEINTERVALS; ioctls.</para>
- </listitem>
- <listitem>
- <para>&VIDIOC-G-ENC-INDEX; ioctl.</para>
- </listitem>
- <listitem>
- <para>&VIDIOC-ENCODER-CMD; and &VIDIOC-TRY-ENCODER-CMD;
+ </listitem>
+ <listitem>
+ <para>&VIDIOC-G-ENC-INDEX; ioctl.</para>
+ </listitem>
+ <listitem>
+ <para>&VIDIOC-ENCODER-CMD; and &VIDIOC-TRY-ENCODER-CMD;
ioctls.</para>
- </listitem>
- <listitem>
- <para>&VIDIOC-DBG-G-REGISTER; and &VIDIOC-DBG-S-REGISTER;
+ </listitem>
+ <listitem>
+ <para>&VIDIOC-DBG-G-REGISTER; and &VIDIOC-DBG-S-REGISTER;
ioctls.</para>
- </listitem>
- <listitem>
- <para>&VIDIOC-DBG-G-CHIP-IDENT; ioctl.</para>
- </listitem>
- </itemizedlist>
- </section>
+ </listitem>
+ <listitem>
+ <para>&VIDIOC-DBG-G-CHIP-IDENT; ioctl.</para>
+ </listitem>
+ </itemizedlist>
+ </section>
- <section id="obsolete">
- <title>Obsolete API Elements</title>
+ <section id="obsolete">
+ <title>Obsolete API Elements</title>
- <para>The following V4L2 API elements were superseded by new
+ <para>The following V4L2 API elements were superseded by new
interfaces and should not be implemented in new drivers.</para>
- <itemizedlist>
- <listitem>
- <para><constant>VIDIOC_G_MPEGCOMP</constant> and
+ <itemizedlist>
+ <listitem>
+ <para><constant>VIDIOC_G_MPEGCOMP</constant> and
<constant>VIDIOC_S_MPEGCOMP</constant> ioctls. Use Extended Controls,
<xref linkend="extended-controls" />.</para>
- </listitem>
- </itemizedlist>
+ </listitem>
+ </itemizedlist>
+ </section>
</section>
<!--
diff --git a/Documentation/DocBook/v4l/controls.xml b/Documentation/DocBook/v4l/controls.xml
index f4645061041..8408caaee27 100644
--- a/Documentation/DocBook/v4l/controls.xml
+++ b/Documentation/DocBook/v4l/controls.xml
@@ -267,6 +267,12 @@ minimum value disables backlight compensation.</entry>
<entry>Chroma automatic gain control.</entry>
</row>
<row>
+ <entry><constant>V4L2_CID_CHROMA_GAIN</constant></entry>
+ <entry>integer</entry>
+ <entry>Adjusts the Chroma gain control (for use when chroma AGC
+ is disabled).</entry>
+ </row>
+ <row>
<entry><constant>V4L2_CID_COLOR_KILLER</constant></entry>
<entry>boolean</entry>
<entry>Enable the color killer (&ie; force a black &amp; white image in case of a weak video signal).</entry>
@@ -277,8 +283,15 @@ minimum value disables backlight compensation.</entry>
<entry>Selects a color effect. Possible values for
<constant>enum v4l2_colorfx</constant> are:
<constant>V4L2_COLORFX_NONE</constant> (0),
-<constant>V4L2_COLORFX_BW</constant> (1) and
-<constant>V4L2_COLORFX_SEPIA</constant> (2).</entry>
+<constant>V4L2_COLORFX_BW</constant> (1),
+<constant>V4L2_COLORFX_SEPIA</constant> (2),
+<constant>V4L2_COLORFX_NEGATIVE</constant> (3),
+<constant>V4L2_COLORFX_EMBOSS</constant> (4),
+<constant>V4L2_COLORFX_SKETCH</constant> (5),
+<constant>V4L2_COLORFX_SKY_BLUE</constant> (6),
+<constant>V4L2_COLORFX_GRASS_GREEN</constant> (7),
+<constant>V4L2_COLORFX_SKIN_WHITEN</constant> (8) and
+<constant>V4L2_COLORFX_VIVID</constant> (9).</entry>
</row>
<row>
<entry><constant>V4L2_CID_ROTATE</constant></entry>
@@ -1825,6 +1838,25 @@ wide-angle direction. The zoom speed unit is driver-specific.</entry>
<row><entry></entry></row>
<row>
+ <entry spanname="id"><constant>V4L2_CID_IRIS_ABSOLUTE</constant>&nbsp;</entry>
+ <entry>integer</entry>
+ </row><row><entry spanname="descr">This control sets the
+camera's aperture to the specified value. The unit is undefined.
+Larger values open the iris wider, smaller values close it.</entry>
+ </row>
+ <row><entry></entry></row>
+
+ <row>
+ <entry spanname="id"><constant>V4L2_CID_IRIS_RELATIVE</constant>&nbsp;</entry>
+ <entry>integer</entry>
+ </row><row><entry spanname="descr">This control modifies the
+camera's aperture by the specified amount. The unit is undefined.
+Positive values open the iris one step further, negative values close
+it one step further. This is a write-only control.</entry>
+ </row>
+ <row><entry></entry></row>
+
+ <row>
<entry spanname="id"><constant>V4L2_CID_PRIVACY</constant>&nbsp;</entry>
<entry>boolean</entry>
</row><row><entry spanname="descr">Prevent video from being acquired
diff --git a/Documentation/DocBook/v4l/dev-event.xml b/Documentation/DocBook/v4l/dev-event.xml
new file mode 100644
index 00000000000..be5a98fb4fa
--- /dev/null
+++ b/Documentation/DocBook/v4l/dev-event.xml
@@ -0,0 +1,31 @@
+ <title>Event Interface</title>
+
+ <para>The V4L2 event interface provides means for user to get
+ immediately notified on certain conditions taking place on a device.
+ This might include start of frame or loss of signal events, for
+ example.
+ </para>
+
+ <para>To receive events, the events the user is interested in first must
+ be subscribed using the &VIDIOC-SUBSCRIBE-EVENT; ioctl. Once an event is
+ subscribed, the events of subscribed types are dequeueable using the
+ &VIDIOC-DQEVENT; ioctl. Events may be unsubscribed using
+ VIDIOC_UNSUBSCRIBE_EVENT ioctl. The special event type V4L2_EVENT_ALL may
+ be used to unsubscribe all the events the driver supports.</para>
+
+ <para>The event subscriptions and event queues are specific to file
+ handles. Subscribing an event on one file handle does not affect
+ other file handles.
+ </para>
+
+ <para>The information on dequeueable events is obtained by using select or
+ poll system calls on video devices. The V4L2 events use POLLPRI events on
+ poll system call and exceptions on select system call. </para>
+
+ <!--
+Local Variables:
+mode: sgml
+sgml-parent-document: "v4l2.sgml"
+indent-tabs-mode: nil
+End:
+ -->
diff --git a/Documentation/DocBook/v4l/fdl-appendix.xml b/Documentation/DocBook/v4l/fdl-appendix.xml
index b6ce50dbe49..ae22394ba99 100644
--- a/Documentation/DocBook/v4l/fdl-appendix.xml
+++ b/Documentation/DocBook/v4l/fdl-appendix.xml
@@ -2,7 +2,7 @@
The GNU Free Documentation License 1.1 in DocBook
Markup by Eric Baudais <baudais@okstate.edu>
Maintained by the GNOME Documentation Project
- http://developer.gnome.org/projects/gdp
+ http://live.gnome.org/DocumentationProject
Version: 1.0.1
Last Modified: Nov 16, 2000
-->
diff --git a/Documentation/DocBook/v4l/io.xml b/Documentation/DocBook/v4l/io.xml
index f92f24323b2..d424886beda 100644
--- a/Documentation/DocBook/v4l/io.xml
+++ b/Documentation/DocBook/v4l/io.xml
@@ -589,7 +589,8 @@ number of a video input as in &v4l2-input; field
<entry></entry>
<entry>A place holder for future extensions and custom
(driver defined) buffer types
-<constant>V4L2_BUF_TYPE_PRIVATE</constant> and higher.</entry>
+<constant>V4L2_BUF_TYPE_PRIVATE</constant> and higher. Applications
+should set this to 0.</entry>
</row>
</tbody>
</tgroup>
@@ -701,6 +702,16 @@ They can be both cleared however, then the buffer is in "dequeued"
state, in the application domain to say so.</entry>
</row>
<row>
+ <entry><constant>V4L2_BUF_FLAG_ERROR</constant></entry>
+ <entry>0x0040</entry>
+ <entry>When this flag is set, the buffer has been dequeued
+ successfully, although the data might have been corrupted.
+ This is recoverable, streaming may continue as normal and
+ the buffer may be reused normally.
+ Drivers set this flag when the <constant>VIDIOC_DQBUF</constant>
+ ioctl is called.</entry>
+ </row>
+ <row>
<entry><constant>V4L2_BUF_FLAG_KEYFRAME</constant></entry>
<entry>0x0008</entry>
<entry>Drivers set or clear this flag when calling the
@@ -917,8 +928,8 @@ order</emphasis>.</para>
<para>When the driver provides or accepts images field by field
rather than interleaved, it is also important applications understand
-how the fields combine to frames. We distinguish between top and
-bottom fields, the <emphasis>spatial order</emphasis>: The first line
+how the fields combine to frames. We distinguish between top (aka odd) and
+bottom (aka even) fields, the <emphasis>spatial order</emphasis>: The first line
of the top field is the first line of an interlaced frame, the first
line of the bottom field is the second line of that frame.</para>
@@ -971,12 +982,12 @@ between <constant>V4L2_FIELD_TOP</constant> and
<row>
<entry><constant>V4L2_FIELD_TOP</constant></entry>
<entry>2</entry>
- <entry>Images consist of the top field only.</entry>
+ <entry>Images consist of the top (aka odd) field only.</entry>
</row>
<row>
<entry><constant>V4L2_FIELD_BOTTOM</constant></entry>
<entry>3</entry>
- <entry>Images consist of the bottom field only.
+ <entry>Images consist of the bottom (aka even) field only.
Applications may wish to prevent a device from capturing interlaced
images because they will have "comb" or "feathering" artefacts around
moving objects.</entry>
diff --git a/Documentation/DocBook/v4l/lirc_device_interface.xml b/Documentation/DocBook/v4l/lirc_device_interface.xml
new file mode 100644
index 00000000000..68134c0ab4d
--- /dev/null
+++ b/Documentation/DocBook/v4l/lirc_device_interface.xml
@@ -0,0 +1,251 @@
+<section id="lirc_dev">
+<title>LIRC Device Interface</title>
+
+
+<section id="lirc_dev_intro">
+<title>Introduction</title>
+
+<para>The LIRC device interface is a bi-directional interface for
+transporting raw IR data between userspace and kernelspace. Fundamentally,
+it is just a chardev (/dev/lircX, for X = 0, 1, 2, ...), with a number
+of standard struct file_operations defined on it. With respect to
+transporting raw IR data to and fro, the essential fops are read, write
+and ioctl.</para>
+
+<para>Example dmesg output upon a driver registering w/LIRC:</para>
+ <blockquote>
+ <para>$ dmesg |grep lirc_dev</para>
+ <para>lirc_dev: IR Remote Control driver registered, major 248</para>
+ <para>rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0</para>
+ </blockquote>
+
+<para>What you should see for a chardev:</para>
+ <blockquote>
+ <para>$ ls -l /dev/lirc*</para>
+ <para>crw-rw---- 1 root root 248, 0 Jul 2 22:20 /dev/lirc0</para>
+ </blockquote>
+</section>
+
+<section id="lirc_read">
+<title>LIRC read fop</title>
+
+<para>The lircd userspace daemon reads raw IR data from the LIRC chardev. The
+exact format of the data depends on what modes a driver supports, and what
+mode has been selected. lircd obtains supported modes and sets the active mode
+via the ioctl interface, detailed at <xref linkend="lirc_ioctl"/>. The generally
+preferred mode is LIRC_MODE_MODE2, in which packets containing an int value
+describing an IR signal are read from the chardev.</para>
+
+<para>See also <ulink url="http://www.lirc.org/html/technical.html">http://www.lirc.org/html/technical.html</ulink> for more info.</para>
+</section>
+
+<section id="lirc_write">
+<title>LIRC write fop</title>
+
+<para>The data written to the chardev is a pulse/space sequence of integer
+values. Pulses and spaces are only marked implicitly by their position. The
+data must start and end with a pulse, therefore, the data must always include
+an unevent number of samples. The write function must block until the data has
+been transmitted by the hardware.</para>
+</section>
+
+<section id="lirc_ioctl">
+<title>LIRC ioctl fop</title>
+
+<para>The LIRC device's ioctl definition is bound by the ioctl function
+definition of struct file_operations, leaving us with an unsigned int
+for the ioctl command and an unsigned long for the arg. For the purposes
+of ioctl portability across 32-bit and 64-bit, these values are capped
+to their 32-bit sizes.</para>
+
+<para>The following ioctls can be used to change specific hardware settings.
+In general each driver should have a default set of settings. The driver
+implementation is expected to re-apply the default settings when the device
+is closed by user-space, so that every application opening the device can rely
+on working with the default settings initially.</para>
+
+<variablelist>
+ <varlistentry>
+ <term>LIRC_GET_FEATURES</term>
+ <listitem>
+ <para>Obviously, get the underlying hardware device's features. If a driver
+ does not announce support of certain features, calling of the corresponding
+ ioctls is undefined.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>LIRC_GET_SEND_MODE</term>
+ <listitem>
+ <para>Get supported transmit mode. Only LIRC_MODE_PULSE is supported by lircd.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>LIRC_GET_REC_MODE</term>
+ <listitem>
+ <para>Get supported receive modes. Only LIRC_MODE_MODE2 and LIRC_MODE_LIRCCODE
+ are supported by lircd.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>LIRC_GET_SEND_CARRIER</term>
+ <listitem>
+ <para>Get carrier frequency (in Hz) currently used for transmit.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>LIRC_GET_REC_CARRIER</term>
+ <listitem>
+ <para>Get carrier frequency (in Hz) currently used for IR reception.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>LIRC_{G,S}ET_{SEND,REC}_DUTY_CYCLE</term>
+ <listitem>
+ <para>Get/set the duty cycle (from 0 to 100) of the carrier signal. Currently,
+ no special meaning is defined for 0 or 100, but this could be used to switch
+ off carrier generation in the future, so these values should be reserved.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>LIRC_GET_REC_RESOLUTION</term>
+ <listitem>
+ <para>Some receiver have maximum resolution which is defined by internal
+ sample rate or data format limitations. E.g. it's common that signals can
+ only be reported in 50 microsecond steps. This integer value is used by
+ lircd to automatically adjust the aeps tolerance value in the lircd
+ config file.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>LIRC_GET_M{IN,AX}_TIMEOUT</term>
+ <listitem>
+ <para>Some devices have internal timers that can be used to detect when
+ there's no IR activity for a long time. This can help lircd in detecting
+ that a IR signal is finished and can speed up the decoding process.
+ Returns an integer value with the minimum/maximum timeout that can be
+ set. Some devices have a fixed timeout, in that case both ioctls will
+ return the same value even though the timeout cannot be changed.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>LIRC_GET_M{IN,AX}_FILTER_{PULSE,SPACE}</term>
+ <listitem>
+ <para>Some devices are able to filter out spikes in the incoming signal
+ using given filter rules. These ioctls return the hardware capabilities
+ that describe the bounds of the possible filters. Filter settings depend
+ on the IR protocols that are expected. lircd derives the settings from
+ all protocols definitions found in its config file.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>LIRC_GET_LENGTH</term>
+ <listitem>
+ <para>Retrieves the code length in bits (only for LIRC_MODE_LIRCCODE).
+ Reads on the device must be done in blocks matching the bit count.
+ The bit could should be rounded up so that it matches full bytes.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>LIRC_SET_{SEND,REC}_MODE</term>
+ <listitem>
+ <para>Set send/receive mode. Largely obsolete for send, as only
+ LIRC_MODE_PULSE is supported.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>LIRC_SET_{SEND,REC}_CARRIER</term>
+ <listitem>
+ <para>Set send/receive carrier (in Hz).</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>LIRC_SET_TRANSMITTER_MASK</term>
+ <listitem>
+ <para>This enables the given set of transmitters. The first transmitter
+ is encoded by the least significant bit, etc. When an invalid bit mask
+ is given, i.e. a bit is set, even though the device does not have so many
+ transitters, then this ioctl returns the number of available transitters
+ and does nothing otherwise.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>LIRC_SET_REC_TIMEOUT</term>
+ <listitem>
+ <para>Sets the integer value for IR inactivity timeout (cf.
+ LIRC_GET_MIN_TIMEOUT and LIRC_GET_MAX_TIMEOUT). A value of 0 (if
+ supported by the hardware) disables all hardware timeouts and data should
+ be reported as soon as possible. If the exact value cannot be set, then
+ the next possible value _greater_ than the given value should be set.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>LIRC_SET_REC_TIMEOUT_REPORTS</term>
+ <listitem>
+ <para>Enable (1) or disable (0) timeout reports in LIRC_MODE_MODE2. By
+ default, timeout reports should be turned off.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>LIRC_SET_REC_FILTER_{,PULSE,SPACE}</term>
+ <listitem>
+ <para>Pulses/spaces shorter than this are filtered out by hardware. If
+ filters cannot be set independently for pulse/space, the corresponding
+ ioctls must return an error and LIRC_SET_REC_FILTER shall be used instead.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>LIRC_SET_MEASURE_CARRIER_MODE</term>
+ <listitem>
+ <para>Enable (1)/disable (0) measure mode. If enabled, from the next key
+ press on, the driver will send LIRC_MODE2_FREQUENCY packets. By default
+ this should be turned off.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>LIRC_SET_REC_{DUTY_CYCLE,CARRIER}_RANGE</term>
+ <listitem>
+ <para>To set a range use LIRC_SET_REC_DUTY_CYCLE_RANGE/LIRC_SET_REC_CARRIER_RANGE
+ with the lower bound first and later LIRC_SET_REC_DUTY_CYCLE/LIRC_SET_REC_CARRIER
+ with the upper bound.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>LIRC_NOTIFY_DECODE</term>
+ <listitem>
+ <para>This ioctl is called by lircd whenever a successful decoding of an
+ incoming IR signal could be done. This can be used by supporting hardware
+ to give visual feedback to the user e.g. by flashing a LED.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>LIRC_SETUP_{START,END}</term>
+ <listitem>
+ <para>Setting of several driver parameters can be optimized by encapsulating
+ the according ioctl calls with LIRC_SETUP_START/LIRC_SETUP_END. When a
+ driver receives a LIRC_SETUP_START ioctl it can choose to not commit
+ further setting changes to the hardware until a LIRC_SETUP_END is received.
+ But this is open to the driver implementation and every driver must also
+ handle parameter changes which are not encapsulated by LIRC_SETUP_START
+ and LIRC_SETUP_END. Drivers can also choose to ignore these ioctls.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>LIRC_SET_WIDEBAND_RECEIVER</term>
+ <listitem>
+ <para>Some receivers are equipped with special wide band receiver which is intended
+ to be used to learn output of existing remote.
+ Calling that ioctl with (1) will enable it, and with (0) disable it.
+ This might be useful of receivers that have otherwise narrow band receiver
+ that prevents them to be used with some remotes.
+ Wide band receiver might also be more precise
+ On the other hand its disadvantage it usually reduced range of reception.
+ Note: wide band receiver might be implictly enabled if you enable
+ carrier reports. In that case it will be disabled as soon as you disable
+ carrier reports. Trying to disable wide band receiver while carrier
+ reports are active will do nothing.</para>
+ </listitem>
+ </varlistentry>
+</variablelist>
+
+</section>
+</section>
diff --git a/Documentation/DocBook/v4l/pixfmt-packed-rgb.xml b/Documentation/DocBook/v4l/pixfmt-packed-rgb.xml
index d2dd697a81d..26e87923108 100644
--- a/Documentation/DocBook/v4l/pixfmt-packed-rgb.xml
+++ b/Documentation/DocBook/v4l/pixfmt-packed-rgb.xml
@@ -240,6 +240,45 @@ colorspace <constant>V4L2_COLORSPACE_SRGB</constant>.</para>
<entry>r<subscript>1</subscript></entry>
<entry>r<subscript>0</subscript></entry>
</row>
+ <row id="V4L2-PIX-FMT-BGR666">
+ <entry><constant>V4L2_PIX_FMT_BGR666</constant></entry>
+ <entry>'BGRH'</entry>
+ <entry></entry>
+ <entry>b<subscript>5</subscript></entry>
+ <entry>b<subscript>4</subscript></entry>
+ <entry>b<subscript>3</subscript></entry>
+ <entry>b<subscript>2</subscript></entry>
+ <entry>b<subscript>1</subscript></entry>
+ <entry>b<subscript>0</subscript></entry>
+ <entry>g<subscript>5</subscript></entry>
+ <entry>g<subscript>4</subscript></entry>
+ <entry></entry>
+ <entry>g<subscript>3</subscript></entry>
+ <entry>g<subscript>2</subscript></entry>
+ <entry>g<subscript>1</subscript></entry>
+ <entry>g<subscript>0</subscript></entry>
+ <entry>r<subscript>5</subscript></entry>
+ <entry>r<subscript>4</subscript></entry>
+ <entry>r<subscript>3</subscript></entry>
+ <entry>r<subscript>2</subscript></entry>
+ <entry></entry>
+ <entry>r<subscript>1</subscript></entry>
+ <entry>r<subscript>0</subscript></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ </row>
<row id="V4L2-PIX-FMT-BGR24">
<entry><constant>V4L2_PIX_FMT_BGR24</constant></entry>
<entry>'BGR3'</entry>
@@ -700,6 +739,45 @@ defined in error. Drivers may interpret them as in <xref
<entry>b<subscript>1</subscript></entry>
<entry>b<subscript>0</subscript></entry>
</row>
+ <row id="V4L2-PIX-FMT-BGR666">
+ <entry><constant>V4L2_PIX_FMT_BGR666</constant></entry>
+ <entry>'BGRH'</entry>
+ <entry></entry>
+ <entry>b<subscript>5</subscript></entry>
+ <entry>b<subscript>4</subscript></entry>
+ <entry>b<subscript>3</subscript></entry>
+ <entry>b<subscript>2</subscript></entry>
+ <entry>b<subscript>1</subscript></entry>
+ <entry>b<subscript>0</subscript></entry>
+ <entry>g<subscript>5</subscript></entry>
+ <entry>g<subscript>4</subscript></entry>
+ <entry></entry>
+ <entry>g<subscript>3</subscript></entry>
+ <entry>g<subscript>2</subscript></entry>
+ <entry>g<subscript>1</subscript></entry>
+ <entry>g<subscript>0</subscript></entry>
+ <entry>r<subscript>5</subscript></entry>
+ <entry>r<subscript>4</subscript></entry>
+ <entry>r<subscript>3</subscript></entry>
+ <entry>r<subscript>2</subscript></entry>
+ <entry></entry>
+ <entry>r<subscript>1</subscript></entry>
+ <entry>r<subscript>0</subscript></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ <entry></entry>
+ </row>
<row><!-- id="V4L2-PIX-FMT-BGR24" -->
<entry><constant>V4L2_PIX_FMT_BGR24</constant></entry>
<entry>'BGR3'</entry>
diff --git a/Documentation/DocBook/v4l/pixfmt.xml b/Documentation/DocBook/v4l/pixfmt.xml
index 885968d6a2f..c4ad0a8e42d 100644
--- a/Documentation/DocBook/v4l/pixfmt.xml
+++ b/Documentation/DocBook/v4l/pixfmt.xml
@@ -792,6 +792,18 @@ http://www.thedirks.org/winnov/</ulink></para></entry>
<entry>'YYUV'</entry>
<entry>unknown</entry>
</row>
+ <row id="V4L2-PIX-FMT-Y4">
+ <entry><constant>V4L2_PIX_FMT_Y4</constant></entry>
+ <entry>'Y04 '</entry>
+ <entry>Old 4-bit greyscale format. Only the least significant 4 bits of each byte are used,
+the other bits are set to 0.</entry>
+ </row>
+ <row id="V4L2-PIX-FMT-Y6">
+ <entry><constant>V4L2_PIX_FMT_Y6</constant></entry>
+ <entry>'Y06 '</entry>
+ <entry>Old 6-bit greyscale format. Only the least significant 6 bits of each byte are used,
+the other bits are set to 0.</entry>
+ </row>
</tbody>
</tgroup>
</table>
diff --git a/Documentation/DocBook/v4l/remote_controllers.xml b/Documentation/DocBook/v4l/remote_controllers.xml
index 73f5eab091f..3c3b667b28e 100644
--- a/Documentation/DocBook/v4l/remote_controllers.xml
+++ b/Documentation/DocBook/v4l/remote_controllers.xml
@@ -173,3 +173,5 @@ keymapping.</para>
<para>This program demonstrates how to replace the keymap tables.</para>
&sub-keytable-c;
</section>
+
+&sub-lirc_device_interface;
diff --git a/Documentation/DocBook/v4l/v4l2.xml b/Documentation/DocBook/v4l/v4l2.xml
index 060105af49e..7c3c098d5d0 100644
--- a/Documentation/DocBook/v4l/v4l2.xml
+++ b/Documentation/DocBook/v4l/v4l2.xml
@@ -58,7 +58,7 @@ MPEG stream embedded, sliced VBI data format in this specification.
</contrib>
<affiliation>
<address>
- <email>awalls@radix.net</email>
+ <email>awalls@md.metrocast.net</email>
</address>
</affiliation>
</author>
@@ -401,6 +401,7 @@ and discussions on the V4L mailing list.</revremark>
<section id="ttx"> &sub-dev-teletext; </section>
<section id="radio"> &sub-dev-radio; </section>
<section id="rds"> &sub-dev-rds; </section>
+ <section id="event"> &sub-dev-event; </section>
</chapter>
<chapter id="driver">
@@ -426,6 +427,7 @@ and discussions on the V4L mailing list.</revremark>
&sub-cropcap;
&sub-dbg-g-chip-ident;
&sub-dbg-g-register;
+ &sub-dqevent;
&sub-encoder-cmd;
&sub-enumaudio;
&sub-enumaudioout;
@@ -467,6 +469,7 @@ and discussions on the V4L mailing list.</revremark>
&sub-reqbufs;
&sub-s-hw-freq-seek;
&sub-streamon;
+ &sub-subscribe-event;
<!-- End of ioctls. -->
&sub-mmap;
&sub-munmap;
diff --git a/Documentation/DocBook/v4l/videodev2.h.xml b/Documentation/DocBook/v4l/videodev2.h.xml
index 06832594065..865b06d9e67 100644
--- a/Documentation/DocBook/v4l/videodev2.h.xml
+++ b/Documentation/DocBook/v4l/videodev2.h.xml
@@ -1018,6 +1018,13 @@ enum <link linkend="v4l2-colorfx">v4l2_colorfx</link> {
V4L2_COLORFX_NONE = 0,
V4L2_COLORFX_BW = 1,
V4L2_COLORFX_SEPIA = 2,
+ V4L2_COLORFX_NEGATIVE = 3,
+ V4L2_COLORFX_EMBOSS = 4,
+ V4L2_COLORFX_SKETCH = 5,
+ V4L2_COLORFX_SKY_BLUE = 6,
+ V4L2_COLORFX_GRASS_GREEN = 7,
+ V4L2_COLORFX_SKIN_WHITEN = 8,
+ V4L2_COLORFX_VIVID = 9.
};
#define V4L2_CID_AUTOBRIGHTNESS (V4L2_CID_BASE+32)
#define V4L2_CID_BAND_STOP_FILTER (V4L2_CID_BASE+33)
@@ -1271,6 +1278,9 @@ enum <link linkend="v4l2-exposure-auto-type">v4l2_exposure_auto_type</link> {
#define V4L2_CID_PRIVACY (V4L2_CID_CAMERA_CLASS_BASE+16)
+#define V4L2_CID_IRIS_ABSOLUTE (V4L2_CID_CAMERA_CLASS_BASE+17)
+#define V4L2_CID_IRIS_RELATIVE (V4L2_CID_CAMERA_CLASS_BASE+18)
+
/* FM Modulator class control IDs */
#define V4L2_CID_FM_TX_CLASS_BASE (V4L2_CTRL_CLASS_FM_TX | 0x900)
#define V4L2_CID_FM_TX_CLASS (V4L2_CTRL_CLASS_FM_TX | 1)
diff --git a/Documentation/DocBook/v4l/vidioc-dqevent.xml b/Documentation/DocBook/v4l/vidioc-dqevent.xml
new file mode 100644
index 00000000000..4e0a7cc3081
--- /dev/null
+++ b/Documentation/DocBook/v4l/vidioc-dqevent.xml
@@ -0,0 +1,131 @@
+<refentry id="vidioc-dqevent">
+ <refmeta>
+ <refentrytitle>ioctl VIDIOC_DQEVENT</refentrytitle>
+ &manvol;
+ </refmeta>
+
+ <refnamediv>
+ <refname>VIDIOC_DQEVENT</refname>
+ <refpurpose>Dequeue event</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <funcsynopsis>
+ <funcprototype>
+ <funcdef>int <function>ioctl</function></funcdef>
+ <paramdef>int <parameter>fd</parameter></paramdef>
+ <paramdef>int <parameter>request</parameter></paramdef>
+ <paramdef>struct v4l2_event
+*<parameter>argp</parameter></paramdef>
+ </funcprototype>
+ </funcsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Arguments</title>
+
+ <variablelist>
+ <varlistentry>
+ <term><parameter>fd</parameter></term>
+ <listitem>
+ <para>&fd;</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>request</parameter></term>
+ <listitem>
+ <para>VIDIOC_DQEVENT</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>argp</parameter></term>
+ <listitem>
+ <para></para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Description</title>
+
+ <para>Dequeue an event from a video device. No input is required
+ for this ioctl. All the fields of the &v4l2-event; structure are
+ filled by the driver. The file handle will also receive exceptions
+ which the application may get by e.g. using the select system
+ call.</para>
+
+ <table frame="none" pgwide="1" id="v4l2-event">
+ <title>struct <structname>v4l2_event</structname></title>
+ <tgroup cols="4">
+ &cs-str;
+ <tbody valign="top">
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>type</structfield></entry>
+ <entry></entry>
+ <entry>Type of the event.</entry>
+ </row>
+ <row>
+ <entry>union</entry>
+ <entry><structfield>u</structfield></entry>
+ <entry></entry>
+ <entry></entry>
+ </row>
+ <row>
+ <entry></entry>
+ <entry>&v4l2-event-vsync;</entry>
+ <entry><structfield>vsync</structfield></entry>
+ <entry>Event data for event V4L2_EVENT_VSYNC.
+ </entry>
+ </row>
+ <row>
+ <entry></entry>
+ <entry>__u8</entry>
+ <entry><structfield>data</structfield>[64]</entry>
+ <entry>Event data. Defined by the event type. The union
+ should be used to define easily accessible type for
+ events.</entry>
+ </row>
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>pending</structfield></entry>
+ <entry></entry>
+ <entry>Number of pending events excluding this one.</entry>
+ </row>
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>sequence</structfield></entry>
+ <entry></entry>
+ <entry>Event sequence number. The sequence number is
+ incremented for every subscribed event that takes place.
+ If sequence numbers are not contiguous it means that
+ events have been lost.
+ </entry>
+ </row>
+ <row>
+ <entry>struct timespec</entry>
+ <entry><structfield>timestamp</structfield></entry>
+ <entry></entry>
+ <entry>Event timestamp.</entry>
+ </row>
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>reserved</structfield>[9]</entry>
+ <entry></entry>
+ <entry>Reserved for future extensions. Drivers must set
+ the array to zero.</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+
+ </refsect1>
+</refentry>
+<!--
+Local Variables:
+mode: sgml
+sgml-parent-document: "v4l2.sgml"
+indent-tabs-mode: nil
+End:
+-->
diff --git a/Documentation/DocBook/v4l/vidioc-enuminput.xml b/Documentation/DocBook/v4l/vidioc-enuminput.xml
index 71b868e2fb8..476fe1d2bba 100644
--- a/Documentation/DocBook/v4l/vidioc-enuminput.xml
+++ b/Documentation/DocBook/v4l/vidioc-enuminput.xml
@@ -283,7 +283,7 @@ input/output interface to linux-media@vger.kernel.org on 19 Oct 2009.
<entry>This input supports setting DV presets by using VIDIOC_S_DV_PRESET.</entry>
</row>
<row>
- <entry><constant>V4L2_OUT_CAP_CUSTOM_TIMINGS</constant></entry>
+ <entry><constant>V4L2_IN_CAP_CUSTOM_TIMINGS</constant></entry>
<entry>0x00000002</entry>
<entry>This input supports setting custom video timings by using VIDIOC_S_DV_TIMINGS.</entry>
</row>
diff --git a/Documentation/DocBook/v4l/vidioc-g-parm.xml b/Documentation/DocBook/v4l/vidioc-g-parm.xml
index 78332d365ce..392aa9e5571 100644
--- a/Documentation/DocBook/v4l/vidioc-g-parm.xml
+++ b/Documentation/DocBook/v4l/vidioc-g-parm.xml
@@ -55,7 +55,7 @@ captured or output, applications can request frame skipping or
duplicating on the driver side. This is especially useful when using
the <function>read()</function> or <function>write()</function>, which
are not augmented by timestamps or sequence counters, and to avoid
-unneccessary data copying.</para>
+unnecessary data copying.</para>
<para>Further these ioctls can be used to determine the number of
buffers used internally by a driver in read/write mode. For
diff --git a/Documentation/DocBook/v4l/vidioc-qbuf.xml b/Documentation/DocBook/v4l/vidioc-qbuf.xml
index 18708177815..ab691ebf3b9 100644
--- a/Documentation/DocBook/v4l/vidioc-qbuf.xml
+++ b/Documentation/DocBook/v4l/vidioc-qbuf.xml
@@ -54,12 +54,10 @@ to enqueue an empty (capturing) or filled (output) buffer in the
driver's incoming queue. The semantics depend on the selected I/O
method.</para>
- <para>To enqueue a <link linkend="mmap">memory mapped</link>
-buffer applications set the <structfield>type</structfield> field of a
-&v4l2-buffer; to the same buffer type as previously &v4l2-format;
-<structfield>type</structfield> and &v4l2-requestbuffers;
-<structfield>type</structfield>, the <structfield>memory</structfield>
-field to <constant>V4L2_MEMORY_MMAP</constant> and the
+ <para>To enqueue a buffer applications set the <structfield>type</structfield>
+field of a &v4l2-buffer; to the same buffer type as was previously used
+with &v4l2-format; <structfield>type</structfield> and &v4l2-requestbuffers;
+<structfield>type</structfield>. Applications must also set the
<structfield>index</structfield> field. Valid index numbers range from
zero to the number of buffers allocated with &VIDIOC-REQBUFS;
(&v4l2-requestbuffers; <structfield>count</structfield>) minus one. The
@@ -70,8 +68,19 @@ intended for output (<structfield>type</structfield> is
<constant>V4L2_BUF_TYPE_VBI_OUTPUT</constant>) applications must also
initialize the <structfield>bytesused</structfield>,
<structfield>field</structfield> and
-<structfield>timestamp</structfield> fields. See <xref
- linkend="buffer" /> for details. When
+<structfield>timestamp</structfield> fields, see <xref
+linkend="buffer" /> for details.
+Applications must also set <structfield>flags</structfield> to 0. If a driver
+supports capturing from specific video inputs and you want to specify a video
+input, then <structfield>flags</structfield> should be set to
+<constant>V4L2_BUF_FLAG_INPUT</constant> and the field
+<structfield>input</structfield> must be initialized to the desired input.
+The <structfield>reserved</structfield> field must be set to 0.
+</para>
+
+ <para>To enqueue a <link linkend="mmap">memory mapped</link>
+buffer applications set the <structfield>memory</structfield>
+field to <constant>V4L2_MEMORY_MMAP</constant>. When
<constant>VIDIOC_QBUF</constant> is called with a pointer to this
structure the driver sets the
<constant>V4L2_BUF_FLAG_MAPPED</constant> and
@@ -81,14 +90,10 @@ structure the driver sets the
&EINVAL;.</para>
<para>To enqueue a <link linkend="userp">user pointer</link>
-buffer applications set the <structfield>type</structfield> field of a
-&v4l2-buffer; to the same buffer type as previously &v4l2-format;
-<structfield>type</structfield> and &v4l2-requestbuffers;
-<structfield>type</structfield>, the <structfield>memory</structfield>
-field to <constant>V4L2_MEMORY_USERPTR</constant> and the
+buffer applications set the <structfield>memory</structfield>
+field to <constant>V4L2_MEMORY_USERPTR</constant>, the
<structfield>m.userptr</structfield> field to the address of the
-buffer and <structfield>length</structfield> to its size. When the
-buffer is intended for output additional fields must be set as above.
+buffer and <structfield>length</structfield> to its size.
When <constant>VIDIOC_QBUF</constant> is called with a pointer to this
structure the driver sets the <constant>V4L2_BUF_FLAG_QUEUED</constant>
flag and clears the <constant>V4L2_BUF_FLAG_MAPPED</constant> and
@@ -96,16 +101,21 @@ flag and clears the <constant>V4L2_BUF_FLAG_MAPPED</constant> and
<structfield>flags</structfield> field, or it returns an error code.
This ioctl locks the memory pages of the buffer in physical memory,
they cannot be swapped out to disk. Buffers remain locked until
-dequeued, until the &VIDIOC-STREAMOFF; or &VIDIOC-REQBUFS; ioctl are
+dequeued, until the &VIDIOC-STREAMOFF; or &VIDIOC-REQBUFS; ioctl is
called, or until the device is closed.</para>
<para>Applications call the <constant>VIDIOC_DQBUF</constant>
ioctl to dequeue a filled (capturing) or displayed (output) buffer
from the driver's outgoing queue. They just set the
-<structfield>type</structfield> and <structfield>memory</structfield>
+<structfield>type</structfield>, <structfield>memory</structfield>
+and <structfield>reserved</structfield>
fields of a &v4l2-buffer; as above, when <constant>VIDIOC_DQBUF</constant>
is called with a pointer to this structure the driver fills the
-remaining fields or returns an error code.</para>
+remaining fields or returns an error code. The driver may also set
+<constant>V4L2_BUF_FLAG_ERROR</constant> in the <structfield>flags</structfield>
+field. It indicates a non-critical (recoverable) streaming error. In such case
+the application may continue as normal, but should be aware that data in the
+dequeued buffer might be corrupted.</para>
<para>By default <constant>VIDIOC_DQBUF</constant> blocks when no
buffer is in the outgoing queue. When the
@@ -152,7 +162,13 @@ enqueue a user pointer buffer.</para>
<para><constant>VIDIOC_DQBUF</constant> failed due to an
internal error. Can also indicate temporary problems like signal
loss. Note the driver might dequeue an (empty) buffer despite
-returning an error, or even stop capturing.</para>
+returning an error, or even stop capturing. Reusing such buffer may be unsafe
+though and its details (e.g. <structfield>index</structfield>) may not be
+returned either. It is recommended that drivers indicate recoverable errors
+by setting the <constant>V4L2_BUF_FLAG_ERROR</constant> and returning 0 instead.
+In that case the application should be able to safely reuse the buffer and
+continue streaming.
+ </para>
</listitem>
</varlistentry>
</variablelist>
diff --git a/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml b/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml
index 87e4f0f6151..402229ee06f 100644
--- a/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml
+++ b/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml
@@ -53,8 +53,10 @@ input</refpurpose>
automatically, similar to sensing the video standard. To do so, applications
call <constant> VIDIOC_QUERY_DV_PRESET</constant> with a pointer to a
&v4l2-dv-preset; type. Once the hardware detects a preset, that preset is
-returned in the preset field of &v4l2-dv-preset;. When detection is not
-possible or fails, the value V4L2_DV_INVALID is returned.</para>
+returned in the preset field of &v4l2-dv-preset;. If the preset could not be
+detected because there was no signal, or the signal was unreliable, or the
+signal did not map to a supported preset, then the value V4L2_DV_INVALID is
+returned.</para>
</refsect1>
<refsect1>
diff --git a/Documentation/DocBook/v4l/vidioc-querybuf.xml b/Documentation/DocBook/v4l/vidioc-querybuf.xml
index d834993e619..e649805a490 100644
--- a/Documentation/DocBook/v4l/vidioc-querybuf.xml
+++ b/Documentation/DocBook/v4l/vidioc-querybuf.xml
@@ -54,12 +54,13 @@ buffer at any time after buffers have been allocated with the
&VIDIOC-REQBUFS; ioctl.</para>
<para>Applications set the <structfield>type</structfield> field
- of a &v4l2-buffer; to the same buffer type as previously
+ of a &v4l2-buffer; to the same buffer type as was previously used with
&v4l2-format; <structfield>type</structfield> and &v4l2-requestbuffers;
<structfield>type</structfield>, and the <structfield>index</structfield>
field. Valid index numbers range from zero
to the number of buffers allocated with &VIDIOC-REQBUFS;
(&v4l2-requestbuffers; <structfield>count</structfield>) minus one.
+The <structfield>reserved</structfield> field should to set to 0.
After calling <constant>VIDIOC_QUERYBUF</constant> with a pointer to
this structure drivers return an error code or fill the rest of
the structure.</para>
@@ -68,8 +69,8 @@ the structure.</para>
<constant>V4L2_BUF_FLAG_MAPPED</constant>,
<constant>V4L2_BUF_FLAG_QUEUED</constant> and
<constant>V4L2_BUF_FLAG_DONE</constant> flags will be valid. The
-<structfield>memory</structfield> field will be set to
-<constant>V4L2_MEMORY_MMAP</constant>, the <structfield>m.offset</structfield>
+<structfield>memory</structfield> field will be set to the current
+I/O method, the <structfield>m.offset</structfield>
contains the offset of the buffer from the start of the device memory,
the <structfield>length</structfield> field its size. The driver may
or may not set the remaining fields and flags, they are meaningless in
diff --git a/Documentation/DocBook/v4l/vidioc-queryctrl.xml b/Documentation/DocBook/v4l/vidioc-queryctrl.xml
index 4876ff1a1a0..8e0e055ac93 100644
--- a/Documentation/DocBook/v4l/vidioc-queryctrl.xml
+++ b/Documentation/DocBook/v4l/vidioc-queryctrl.xml
@@ -325,7 +325,7 @@ should be part of the control documentation.</entry>
<entry>n/a</entry>
<entry>This is not a control. When
<constant>VIDIOC_QUERYCTRL</constant> is called with a control ID
-equal to a control class code (see <xref linkend="ctrl-class" />), the
+equal to a control class code (see <xref linkend="ctrl-class" />) + 1, the
ioctl returns the name of the control class and this control type.
Older drivers which do not support this feature return an
&EINVAL;.</entry>
diff --git a/Documentation/DocBook/v4l/vidioc-reqbufs.xml b/Documentation/DocBook/v4l/vidioc-reqbufs.xml
index bab38084454..69800ae2334 100644
--- a/Documentation/DocBook/v4l/vidioc-reqbufs.xml
+++ b/Documentation/DocBook/v4l/vidioc-reqbufs.xml
@@ -54,23 +54,23 @@ I/O. Memory mapped buffers are located in device memory and must be
allocated with this ioctl before they can be mapped into the
application's address space. User buffers are allocated by
applications themselves, and this ioctl is merely used to switch the
-driver into user pointer I/O mode.</para>
+driver into user pointer I/O mode and to setup some internal structures.</para>
- <para>To allocate device buffers applications initialize three
-fields of a <structname>v4l2_requestbuffers</structname> structure.
+ <para>To allocate device buffers applications initialize all
+fields of the <structname>v4l2_requestbuffers</structname> structure.
They set the <structfield>type</structfield> field to the respective
stream or buffer type, the <structfield>count</structfield> field to
-the desired number of buffers, and <structfield>memory</structfield>
-must be set to <constant>V4L2_MEMORY_MMAP</constant>. When the ioctl
-is called with a pointer to this structure the driver attempts to
-allocate the requested number of buffers and stores the actual number
+the desired number of buffers, <structfield>memory</structfield>
+must be set to the requested I/O method and the <structfield>reserved</structfield> array
+must be zeroed. When the ioctl
+is called with a pointer to this structure the driver will attempt to allocate
+the requested number of buffers and it stores the actual number
allocated in the <structfield>count</structfield> field. It can be
smaller than the number requested, even zero, when the driver runs out
-of free memory. A larger number is possible when the driver requires
-more buffers to function correctly.<footnote>
- <para>For example video output requires at least two buffers,
+of free memory. A larger number is also possible when the driver requires
+more buffers to function correctly. For example video output requires at least two buffers,
one displayed and one filled by the application.</para>
- </footnote> When memory mapping I/O is not supported the ioctl
+ <para>When the I/O method is not supported the ioctl
returns an &EINVAL;.</para>
<para>Applications can call <constant>VIDIOC_REQBUFS</constant>
@@ -81,14 +81,6 @@ in progress, an implicit &VIDIOC-STREAMOFF;. <!-- mhs: I see no
reason why munmap()ping one or even all buffers must imply
streamoff.--></para>
- <para>To negotiate user pointer I/O, applications initialize only
-the <structfield>type</structfield> field and set
-<structfield>memory</structfield> to
-<constant>V4L2_MEMORY_USERPTR</constant>. When the ioctl is called
-with a pointer to this structure the driver prepares for user pointer
-I/O, when this I/O method is not supported the ioctl returns an
-&EINVAL;.</para>
-
<table pgwide="1" frame="none" id="v4l2-requestbuffers">
<title>struct <structname>v4l2_requestbuffers</structname></title>
<tgroup cols="3">
@@ -97,9 +89,7 @@ I/O, when this I/O method is not supported the ioctl returns an
<row>
<entry>__u32</entry>
<entry><structfield>count</structfield></entry>
- <entry>The number of buffers requested or granted. This
-field is only used when <structfield>memory</structfield> is set to
-<constant>V4L2_MEMORY_MMAP</constant>.</entry>
+ <entry>The number of buffers requested or granted.</entry>
</row>
<row>
<entry>&v4l2-buf-type;</entry>
@@ -120,7 +110,7 @@ as the &v4l2-format; <structfield>type</structfield> field. See <xref
<entry><structfield>reserved</structfield>[2]</entry>
<entry>A place holder for future extensions and custom
(driver defined) buffer types <constant>V4L2_BUF_TYPE_PRIVATE</constant> and
-higher.</entry>
+higher. This array should be zeroed by applications.</entry>
</row>
</tbody>
</tgroup>
diff --git a/Documentation/DocBook/v4l/vidioc-subscribe-event.xml b/Documentation/DocBook/v4l/vidioc-subscribe-event.xml
new file mode 100644
index 00000000000..8b501791aa6
--- /dev/null
+++ b/Documentation/DocBook/v4l/vidioc-subscribe-event.xml
@@ -0,0 +1,133 @@
+<refentry id="vidioc-subscribe-event">
+ <refmeta>
+ <refentrytitle>ioctl VIDIOC_SUBSCRIBE_EVENT, VIDIOC_UNSUBSCRIBE_EVENT</refentrytitle>
+ &manvol;
+ </refmeta>
+
+ <refnamediv>
+ <refname>VIDIOC_SUBSCRIBE_EVENT, VIDIOC_UNSUBSCRIBE_EVENT</refname>
+ <refpurpose>Subscribe or unsubscribe event</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <funcsynopsis>
+ <funcprototype>
+ <funcdef>int <function>ioctl</function></funcdef>
+ <paramdef>int <parameter>fd</parameter></paramdef>
+ <paramdef>int <parameter>request</parameter></paramdef>
+ <paramdef>struct v4l2_event_subscription
+*<parameter>argp</parameter></paramdef>
+ </funcprototype>
+ </funcsynopsis>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Arguments</title>
+
+ <variablelist>
+ <varlistentry>
+ <term><parameter>fd</parameter></term>
+ <listitem>
+ <para>&fd;</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>request</parameter></term>
+ <listitem>
+ <para>VIDIOC_SUBSCRIBE_EVENT, VIDIOC_UNSUBSCRIBE_EVENT</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><parameter>argp</parameter></term>
+ <listitem>
+ <para></para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Description</title>
+
+ <para>Subscribe or unsubscribe V4L2 event. Subscribed events are
+ dequeued by using the &VIDIOC-DQEVENT; ioctl.</para>
+
+ <table frame="none" pgwide="1" id="v4l2-event-subscription">
+ <title>struct <structname>v4l2_event_subscription</structname></title>
+ <tgroup cols="3">
+ &cs-str;
+ <tbody valign="top">
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>type</structfield></entry>
+ <entry>Type of the event.</entry>
+ </row>
+ <row>
+ <entry>__u32</entry>
+ <entry><structfield>reserved</structfield>[7]</entry>
+ <entry>Reserved for future extensions. Drivers and applications
+ must set the array to zero.</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+
+ <table frame="none" pgwide="1" id="event-type">
+ <title>Event Types</title>
+ <tgroup cols="3">
+ &cs-def;
+ <tbody valign="top">
+ <row>
+ <entry><constant>V4L2_EVENT_ALL</constant></entry>
+ <entry>0</entry>
+ <entry>All events. V4L2_EVENT_ALL is valid only for
+ VIDIOC_UNSUBSCRIBE_EVENT for unsubscribing all events at once.
+ </entry>
+ </row>
+ <row>
+ <entry><constant>V4L2_EVENT_VSYNC</constant></entry>
+ <entry>1</entry>
+ <entry>This event is triggered on the vertical sync.
+ This event has &v4l2-event-vsync; associated with it.
+ </entry>
+ </row>
+ <row>
+ <entry><constant>V4L2_EVENT_EOS</constant></entry>
+ <entry>2</entry>
+ <entry>This event is triggered when the end of a stream is reached.
+ This is typically used with MPEG decoders to report to the application
+ when the last of the MPEG stream has been decoded.
+ </entry>
+ </row>
+ <row>
+ <entry><constant>V4L2_EVENT_PRIVATE_START</constant></entry>
+ <entry>0x08000000</entry>
+ <entry>Base event number for driver-private events.</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+
+ <table frame="none" pgwide="1" id="v4l2-event-vsync">
+ <title>struct <structname>v4l2_event_vsync</structname></title>
+ <tgroup cols="3">
+ &cs-str;
+ <tbody valign="top">
+ <row>
+ <entry>__u8</entry>
+ <entry><structfield>field</structfield></entry>
+ <entry>The upcoming field. See &v4l2-field;.</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+
+ </refsect1>
+</refentry>
+<!--
+Local Variables:
+mode: sgml
+sgml-parent-document: "v4l2.sgml"
+indent-tabs-mode: nil
+End:
+-->
diff --git a/Documentation/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl
index 0d0f7b4d4b1..0ba149de260 100644
--- a/Documentation/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/DocBook/writing-an-alsa-driver.tmpl
@@ -5518,34 +5518,41 @@ struct _snd_pcm_runtime {
]]>
</programlisting>
</informalexample>
+
+ For the raw data, <structfield>size</structfield> field must be
+ set properly. This specifies the maximum size of the proc file access.
</para>
<para>
- The callback is much more complicated than the text-file
- version. You need to use a low-level I/O functions such as
+ The read/write callbacks of raw mode are more direct than the text mode.
+ You need to use a low-level I/O functions such as
<function>copy_from/to_user()</function> to transfer the
data.
<informalexample>
<programlisting>
<![CDATA[
- static long my_file_io_read(struct snd_info_entry *entry,
+ static ssize_t my_file_io_read(struct snd_info_entry *entry,
void *file_private_data,
struct file *file,
char *buf,
- unsigned long count,
- unsigned long pos)
+ size_t count,
+ loff_t pos)
{
- long size = count;
- if (pos + size > local_max_size)
- size = local_max_size - pos;
- if (copy_to_user(buf, local_data + pos, size))
+ if (copy_to_user(buf, local_data + pos, count))
return -EFAULT;
- return size;
+ return count;
}
]]>
</programlisting>
</informalexample>
+
+ If the size of the info entry has been set up properly,
+ <structfield>count</structfield> and <structfield>pos</structfield> are
+ guaranteed to fit within 0 and the given size.
+ You don't have to check the range in the callbacks unless any
+ other condition is required.
+
</para>
</chapter>
diff --git a/Documentation/DocBook/writing_usb_driver.tmpl b/Documentation/DocBook/writing_usb_driver.tmpl
index eeff19ca831..bd97a13fa5a 100644
--- a/Documentation/DocBook/writing_usb_driver.tmpl
+++ b/Documentation/DocBook/writing_usb_driver.tmpl
@@ -342,7 +342,7 @@ static inline void skel_delete (struct usb_skel *dev)
{
kfree (dev->bulk_in_buffer);
if (dev->bulk_out_buffer != NULL)
- usb_buffer_free (dev->udev, dev->bulk_out_size,
+ usb_free_coherent (dev->udev, dev->bulk_out_size,
dev->bulk_out_buffer,
dev->write_urb->transfer_dma);
usb_free_urb (dev->write_urb);
diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index 8495fc97039..365bda9a0d9 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -187,7 +187,7 @@ apply a patch.
If you do not know where you want to start, but you want to look for
some task to start doing to join into the kernel development community,
go to the Linux Kernel Janitor's project:
- http://janitor.kernelnewbies.org/
+ http://kernelnewbies.org/KernelJanitors
It is a great place to start. It describes a list of relatively simple
problems that need to be cleaned up and fixed within the Linux kernel
source tree. Working with the developers in charge of this project, you
@@ -221,8 +221,8 @@ branches. These different branches are:
- main 2.6.x kernel tree
- 2.6.x.y -stable kernel tree
- 2.6.x -git kernel patches
- - 2.6.x -mm kernel patches
- subsystem specific kernel trees and patches
+ - the 2.6.x -next kernel tree for integration tests
2.6.x kernel tree
-----------------
@@ -232,9 +232,9 @@ process is as follows:
- As soon as a new kernel is released a two weeks window is open,
during this period of time maintainers can submit big diffs to
Linus, usually the patches that have already been included in the
- -mm kernel for a few weeks. The preferred way to submit big changes
+ -next kernel for a few weeks. The preferred way to submit big changes
is using git (the kernel's source management tool, more information
- can be found at http://git.or.cz/) but plain patches are also just
+ can be found at http://git-scm.com/) but plain patches are also just
fine.
- After two weeks a -rc1 kernel is released it is now possible to push
only patches that do not include new features that could affect the
@@ -293,84 +293,43 @@ daily and represent the current state of Linus' tree. They are more
experimental than -rc kernels since they are generated automatically
without even a cursory glance to see if they are sane.
-2.6.x -mm kernel patches
-------------------------
-These are experimental kernel patches released by Andrew Morton. Andrew
-takes all of the different subsystem kernel trees and patches and mushes
-them together, along with a lot of patches that have been plucked from
-the linux-kernel mailing list. This tree serves as a proving ground for
-new features and patches. Once a patch has proved its worth in -mm for
-a while Andrew or the subsystem maintainer pushes it on to Linus for
-inclusion in mainline.
-
-It is heavily encouraged that all new patches get tested in the -mm tree
-before they are sent to Linus for inclusion in the main kernel tree. Code
-which does not make an appearance in -mm before the opening of the merge
-window will prove hard to merge into the mainline.
-
-These kernels are not appropriate for use on systems that are supposed
-to be stable and they are more risky to run than any of the other
-branches.
-
-If you wish to help out with the kernel development process, please test
-and use these kernel releases and provide feedback to the linux-kernel
-mailing list if you have any problems, and if everything works properly.
-
-In addition to all the other experimental patches, these kernels usually
-also contain any changes in the mainline -git kernels available at the
-time of release.
-
-The -mm kernels are not released on a fixed schedule, but usually a few
--mm kernels are released in between each -rc kernel (1 to 3 is common).
-
Subsystem Specific kernel trees and patches
-------------------------------------------
-A number of the different kernel subsystem developers expose their
-development trees so that others can see what is happening in the
-different areas of the kernel. These trees are pulled into the -mm
-kernel releases as described above.
-
-Here is a list of some of the different kernel trees available:
- git trees:
- - Kbuild development tree, Sam Ravnborg <sam@ravnborg.org>
- git.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git
-
- - ACPI development tree, Len Brown <len.brown@intel.com>
- git.kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
-
- - Block development tree, Jens Axboe <jens.axboe@oracle.com>
- git.kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
-
- - DRM development tree, Dave Airlie <airlied@linux.ie>
- git.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git
-
- - ia64 development tree, Tony Luck <tony.luck@intel.com>
- git.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
-
- - infiniband, Roland Dreier <rolandd@cisco.com>
- git.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
-
- - libata, Jeff Garzik <jgarzik@pobox.com>
- git.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
-
- - network drivers, Jeff Garzik <jgarzik@pobox.com>
- git.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
-
- - pcmcia, Dominik Brodowski <linux@dominikbrodowski.net>
- git.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
-
- - SCSI, James Bottomley <James.Bottomley@hansenpartnership.com>
- git.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
-
- - x86, Ingo Molnar <mingo@elte.hu>
- git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
-
- quilt trees:
- - USB, Driver Core, and I2C, Greg Kroah-Hartman <gregkh@suse.de>
- kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+The maintainers of the various kernel subsystems --- and also many
+kernel subsystem developers --- expose their current state of
+development in source repositories. That way, others can see what is
+happening in the different areas of the kernel. In areas where
+development is rapid, a developer may be asked to base his submissions
+onto such a subsystem kernel tree so that conflicts between the
+submission and other already ongoing work are avoided.
+
+Most of these repositories are git trees, but there are also other SCMs
+in use, or patch queues being published as quilt series. Addresses of
+these subsystem repositories are listed in the MAINTAINERS file. Many
+of them can be browsed at http://git.kernel.org/.
+
+Before a proposed patch is committed to such a subsystem tree, it is
+subject to review which primarily happens on mailing lists (see the
+respective section below). For several kernel subsystems, this review
+process is tracked with the tool patchwork. Patchwork offers a web
+interface which shows patch postings, any comments on a patch or
+revisions to it, and maintainers can mark patches as under review,
+accepted, or rejected. Most of these patchwork sites are listed at
+http://patchwork.kernel.org/.
+
+2.6.x -next kernel tree for integration tests
+---------------------------------------------
+Before updates from subsystem trees are merged into the mainline 2.6.x
+tree, they need to be integration-tested. For this purpose, a special
+testing repository exists into which virtually all subsystem trees are
+pulled on an almost daily basis:
+ http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git
+ http://linux.f-seidel.de/linux-next/pmwiki/
+
+This way, the -next kernel gives a summary outlook onto what will be
+expected to go into the mainline kernel at the next merge period.
+Adventurous testers are very welcome to runtime-test the -next kernel.
- Other kernel trees can be found listed at http://git.kernel.org/ and in
- the MAINTAINERS file.
Bug Reporting
-------------
@@ -636,7 +595,7 @@ start exactly where you are now.
----------
Thanks to Paolo Ciarrocchi who allowed the "Development Process"
-(http://linux.tar.bz/articles/2.6-development_process) section
+(http://lwn.net/Articles/94386/) section
to be based on text he had written, and to Randy Dunlap and Gerrit
Huizenga for some of the list of things you should and should not say.
Also thanks to Pat Mochel, Hanna Linder, Randy Dunlap, Kay Sievers,
diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt
index bc38283379f..69dd29ed824 100644
--- a/Documentation/IPMI.txt
+++ b/Documentation/IPMI.txt
@@ -365,6 +365,7 @@ You can change this at module load time (for a module) with:
regshifts=<shift1>,<shift2>,...
slave_addrs=<addr1>,<addr2>,...
force_kipmid=<enable1>,<enable2>,...
+ kipmid_max_busy_us=<ustime1>,<ustime2>,...
unload_when_empty=[0|1]
Each of these except si_trydefaults is a list, the first item for the
@@ -433,6 +434,7 @@ kernel command line as:
ipmi_si.regshifts=<shift1>,<shift2>,...
ipmi_si.slave_addrs=<addr1>,<addr2>,...
ipmi_si.force_kipmid=<enable1>,<enable2>,...
+ ipmi_si.kipmid_max_busy_us=<ustime1>,<ustime2>,...
It works the same as the module parameters of the same names.
@@ -450,6 +452,16 @@ force this thread on or off. If you force it off and don't have
interrupts, the driver will run VERY slowly. Don't blame me,
these interfaces suck.
+Unfortunately, this thread can use a lot of CPU depending on the
+interface's performance. This can waste a lot of CPU and cause
+various issues with detecting idle CPU and using extra power. To
+avoid this, the kipmid_max_busy_us sets the maximum amount of time, in
+microseconds, that kipmid will spin before sleeping for a tick. This
+value sets a balance between performance and CPU waste and needs to be
+tuned to your needs. Maybe, someday, auto-tuning will be added, but
+that's not a simple thing and even the auto-tuning would need to be
+tuned to the user's desired performance.
+
The driver supports a hot add and remove of interfaces. This way,
interfaces can be added or removed after the kernel is up and running.
This is done using /sys/modules/ipmi_si/parameters/hotmod, which is a
diff --git a/Documentation/Makefile b/Documentation/Makefile
index 94b94573353..6fc7ea1d1f9 100644
--- a/Documentation/Makefile
+++ b/Documentation/Makefile
@@ -1,3 +1,3 @@
obj-m := DocBook/ accounting/ auxdisplay/ connector/ \
- filesystems/configfs/ ia64/ networking/ \
- pcmcia/ spi/ video4linux/ vm/ watchdog/src/
+ filesystems/ filesystems/configfs/ ia64/ laptops/ networking/ \
+ pcmcia/ spi/ timers/ video4linux/ vm/ watchdog/src/
diff --git a/Documentation/PCI/pci-error-recovery.txt b/Documentation/PCI/pci-error-recovery.txt
index e83f2ea7641..898ded24510 100644
--- a/Documentation/PCI/pci-error-recovery.txt
+++ b/Documentation/PCI/pci-error-recovery.txt
@@ -216,7 +216,7 @@ The driver should return one of the following result codes:
- PCI_ERS_RESULT_NEED_RESET
Driver returns this if it thinks the device is not
- recoverable in it's current state and it needs a slot
+ recoverable in its current state and it needs a slot
reset to proceed.
- PCI_ERS_RESULT_DISCONNECT
@@ -241,7 +241,7 @@ in working condition.
The driver is not supposed to restart normal driver I/O operations
at this point. It should limit itself to "probing" the device to
-check it's recoverability status. If all is right, then the platform
+check its recoverability status. If all is right, then the platform
will call resume() once all drivers have ack'd link_reset().
Result codes:
diff --git a/Documentation/PCI/pci.txt b/Documentation/PCI/pci.txt
index 7f6de6ea5b4..6148d4080f8 100644
--- a/Documentation/PCI/pci.txt
+++ b/Documentation/PCI/pci.txt
@@ -581,7 +581,7 @@ to be handled by platform and generic code, not individual drivers.
8. Vendor and device identifications
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-One is not not required to add new device ids to include/linux/pci_ids.h.
+One is not required to add new device ids to include/linux/pci_ids.h.
Please add PCI_VENDOR_ID_xxx for vendors and a hex constant for device ids.
PCI_VENDOR_ID_xxx constants are re-used. The device ids are arbitrary
diff --git a/Documentation/PCI/pcieaer-howto.txt b/Documentation/PCI/pcieaer-howto.txt
index be21001ab14..26d3d945c3c 100644
--- a/Documentation/PCI/pcieaer-howto.txt
+++ b/Documentation/PCI/pcieaer-howto.txt
@@ -13,7 +13,7 @@ Reporting (AER) driver and provides information on how to use it, as
well as how to enable the drivers of endpoint devices to conform with
PCI Express AER driver.
-1.2 Copyright Intel Corporation 2006.
+1.2 Copyright (C) Intel Corporation 2006.
1.3 What is the PCI Express AER Driver?
@@ -71,15 +71,11 @@ console. If it's a correctable error, it is outputed as a warning.
Otherwise, it is printed as an error. So users could choose different
log level to filter out correctable error messages.
-Below shows an example.
-+------ PCI-Express Device Error -----+
-Error Severity : Uncorrected (Fatal)
-PCIE Bus Error type : Transaction Layer
-Unsupported Request : First
-Requester ID : 0500
-VendorID=8086h, DeviceID=0329h, Bus=05h, Device=00h, Function=00h
-TLB Header:
-04000001 00200a03 05010000 00050100
+Below shows an example:
+0000:50:00.0: PCIe Bus Error: severity=Uncorrected (Fatal), type=Transaction Layer, id=0500(Requester ID)
+0000:50:00.0: device [8086:0329] error status/mask=00100000/00000000
+0000:50:00.0: [20] Unsupported Request (First)
+0000:50:00.0: TLP Header: 04000001 00200a03 05010000 00050100
In the example, 'Requester ID' means the ID of the device who sends
the error message to root port. Pls. refer to pci express specs for
@@ -112,7 +108,7 @@ but the PCI Express link itself is fully functional. Fatal errors, on
the other hand, cause the link to be unreliable.
When AER is enabled, a PCI Express device will automatically send an
-error message to the PCIE root port above it when the device captures
+error message to the PCIe root port above it when the device captures
an error. The Root Port, upon receiving an error reporting message,
internally processes and logs the error message in its PCI Express
capability structure. Error information being logged includes storing
@@ -198,8 +194,9 @@ to reset link, AER port service driver is required to provide the
function to reset link. Firstly, kernel looks for if the upstream
component has an aer driver. If it has, kernel uses the reset_link
callback of the aer driver. If the upstream component has no aer driver
-and the port is downstream port, we will use the aer driver of the
-root port who reports the AER error. As for upstream ports,
+and the port is downstream port, we will perform a hot reset as the
+default by setting the Secondary Bus Reset bit of the Bridge Control
+register associated with the downstream port. As for upstream ports,
they should provide their own aer service drivers with reset_link
function. If error_detected returns PCI_ERS_RESULT_CAN_RECOVER and
reset_link returns PCI_ERS_RESULT_RECOVERED, the error handling goes
@@ -253,11 +250,11 @@ cleanup uncorrectable status register. Pls. refer to section 3.3.
4. Software error injection
-Debugging PCIE AER error recovery code is quite difficult because it
+Debugging PCIe AER error recovery code is quite difficult because it
is hard to trigger real hardware errors. Software based error
-injection can be used to fake various kinds of PCIE errors.
+injection can be used to fake various kinds of PCIe errors.
-First you should enable PCIE AER software error injection in kernel
+First you should enable PCIe AER software error injection in kernel
configuration, that is, following item should be in your .config.
CONFIG_PCIEAER_INJECT=y or CONFIG_PCIEAER_INJECT=m
diff --git a/Documentation/RCU/00-INDEX b/Documentation/RCU/00-INDEX
index 9bb62f7b89c..71b6f500ddb 100644
--- a/Documentation/RCU/00-INDEX
+++ b/Documentation/RCU/00-INDEX
@@ -6,16 +6,22 @@ checklist.txt
- Review Checklist for RCU Patches
listRCU.txt
- Using RCU to Protect Read-Mostly Linked Lists
+lockdep.txt
+ - RCU and lockdep checking
NMI-RCU.txt
- Using RCU to Protect Dynamic NMI Handlers
+rcubarrier.txt
+ - RCU and Unloadable Modules
+rculist_nulls.txt
+ - RCU list primitives for use with SLAB_DESTROY_BY_RCU
rcuref.txt
- Reference-count design for elements of lists/arrays protected by RCU
rcu.txt
- RCU Concepts
-rcubarrier.txt
- - Unloading modules that use RCU callbacks
RTFP.txt
- List of RCU papers (bibliography) going back to 1980.
+stallwarn.txt
+ - RCU CPU stall warnings (CONFIG_RCU_CPU_STALL_DETECTOR)
torture.txt
- RCU Torture Test Operation (CONFIG_RCU_TORTURE_TEST)
trace.txt
diff --git a/Documentation/RCU/NMI-RCU.txt b/Documentation/RCU/NMI-RCU.txt
index a6d32e65d22..a8536cb8809 100644
--- a/Documentation/RCU/NMI-RCU.txt
+++ b/Documentation/RCU/NMI-RCU.txt
@@ -34,7 +34,7 @@ NMI handler.
cpu = smp_processor_id();
++nmi_count(cpu);
- if (!rcu_dereference(nmi_callback)(regs, cpu))
+ if (!rcu_dereference_sched(nmi_callback)(regs, cpu))
default_do_nmi(regs);
nmi_exit();
@@ -47,12 +47,13 @@ function pointer. If this handler returns zero, do_nmi() invokes the
default_do_nmi() function to handle a machine-specific NMI. Finally,
preemption is restored.
-Strictly speaking, rcu_dereference() is not needed, since this code runs
-only on i386, which does not need rcu_dereference() anyway. However,
-it is a good documentation aid, particularly for anyone attempting to
-do something similar on Alpha.
+In theory, rcu_dereference_sched() is not needed, since this code runs
+only on i386, which in theory does not need rcu_dereference_sched()
+anyway. However, in practice it is a good documentation aid, particularly
+for anyone attempting to do something similar on Alpha or on systems
+with aggressive optimizing compilers.
-Quick Quiz: Why might the rcu_dereference() be necessary on Alpha,
+Quick Quiz: Why might the rcu_dereference_sched() be necessary on Alpha,
given that the code referenced by the pointer is read-only?
@@ -99,17 +100,21 @@ invoke irq_enter() and irq_exit() on NMI entry and exit, respectively.
Answer to Quick Quiz
- Why might the rcu_dereference() be necessary on Alpha, given
+ Why might the rcu_dereference_sched() be necessary on Alpha, given
that the code referenced by the pointer is read-only?
Answer: The caller to set_nmi_callback() might well have
- initialized some data that is to be used by the
- new NMI handler. In this case, the rcu_dereference()
- would be needed, because otherwise a CPU that received
- an NMI just after the new handler was set might see
- the pointer to the new NMI handler, but the old
- pre-initialized version of the handler's data.
-
- More important, the rcu_dereference() makes it clear
- to someone reading the code that the pointer is being
- protected by RCU.
+ initialized some data that is to be used by the new NMI
+ handler. In this case, the rcu_dereference_sched() would
+ be needed, because otherwise a CPU that received an NMI
+ just after the new handler was set might see the pointer
+ to the new NMI handler, but the old pre-initialized
+ version of the handler's data.
+
+ This same sad story can happen on other CPUs when using
+ a compiler with aggressive pointer-value speculation
+ optimizations.
+
+ More important, the rcu_dereference_sched() makes it
+ clear to someone reading the code that the pointer is
+ being protected by RCU-sched.
diff --git a/Documentation/RCU/RTFP.txt b/Documentation/RCU/RTFP.txt
index d2b85237c76..c43460dade0 100644
--- a/Documentation/RCU/RTFP.txt
+++ b/Documentation/RCU/RTFP.txt
@@ -25,10 +25,10 @@ to be referencing the data structure. However, this mechanism was not
optimized for modern computer systems, which is not surprising given
that these overheads were not so expensive in the mid-80s. Nonetheless,
passive serialization appears to be the first deferred-destruction
-mechanism to be used in production. Furthermore, the relevant patent has
-lapsed, so this approach may be used in non-GPL software, if desired.
-(In contrast, use of RCU is permitted only in software licensed under
-GPL. Sorry!!!)
+mechanism to be used in production. Furthermore, the relevant patent
+has lapsed, so this approach may be used in non-GPL software, if desired.
+(In contrast, implementation of RCU is permitted only in software licensed
+under either GPL or LGPL. Sorry!!!)
In 1990, Pugh [Pugh90] noted that explicitly tracking which threads
were reading a given data structure permitted deferred free to operate
@@ -150,6 +150,18 @@ preemptible RCU [PaulEMcKenney2007PreemptibleRCU], and the three-part
LWN "What is RCU?" series [PaulEMcKenney2007WhatIsRCUFundamentally,
PaulEMcKenney2008WhatIsRCUUsage, and PaulEMcKenney2008WhatIsRCUAPI].
+2008 saw a journal paper on real-time RCU [DinakarGuniguntala2008IBMSysJ],
+a history of how Linux changed RCU more than RCU changed Linux
+[PaulEMcKenney2008RCUOSR], and a design overview of hierarchical RCU
+[PaulEMcKenney2008HierarchicalRCU].
+
+2009 introduced user-level RCU algorithms [PaulEMcKenney2009MaliciousURCU],
+which Mathieu Desnoyers is now maintaining [MathieuDesnoyers2009URCU]
+[MathieuDesnoyersPhD]. TINY_RCU [PaulEMcKenney2009BloatWatchRCU] made
+its appearance, as did expedited RCU [PaulEMcKenney2009expeditedRCU].
+The problem of resizeable RCU-protected hash tables may now be on a path
+to a solution [JoshTriplett2009RPHash].
+
Bibtex Entries
@article{Kung80
@@ -594,7 +606,7 @@ Suparna Bhattacharya"
,Year="2006"
,pages="v2 123-138"
,note="Available:
-\url{http://www.linuxsymposium.org/2006/view_abstract.php?content_key=184}
+\url{http://www.linuxsymposium.org/2006/index_2006.php}
\url{http://www.rdrop.com/users/paulmck/RCU/OLSrtRCU.2006.08.11a.pdf}
[Viewed January 1, 2007]"
,annotation="
@@ -730,6 +742,11 @@ Revised:
"
}
+#
+# "What is RCU?" LWN series.
+#
+########################################################################
+
@article{DinakarGuniguntala2008IBMSysJ
,author="D. Guniguntala and P. E. McKenney and J. Triplett and J. Walpole"
,title="The read-copy-update mechanism for supporting real-time applications on shared-memory multiprocessor systems with {Linux}"
@@ -820,3 +837,39 @@ Revised:
Uniprocessor assumptions allow simplified RCU implementation.
"
}
+
+@unpublished{PaulEMcKenney2009expeditedRCU
+,Author="Paul E. McKenney"
+,Title="[{PATCH} -tip 0/3] expedited 'big hammer' {RCU} grace periods"
+,month="June"
+,day="25"
+,year="2009"
+,note="Available:
+\url{http://lkml.org/lkml/2009/6/25/306}
+[Viewed August 16, 2009]"
+,annotation="
+ First posting of expedited RCU to be accepted into -tip.
+"
+}
+
+@unpublished{JoshTriplett2009RPHash
+,Author="Josh Triplett"
+,Title="Scalable concurrent hash tables via relativistic programming"
+,month="September"
+,year="2009"
+,note="Linux Plumbers Conference presentation"
+,annotation="
+ RP fun with hash tables.
+"
+}
+
+@phdthesis{MathieuDesnoyersPhD
+, title = "Low-Impact Operating System Tracing"
+, author = "Mathieu Desnoyers"
+, school = "Ecole Polytechnique de Montr\'{e}al"
+, month = "December"
+, year = 2009
+,note="Available:
+\url{http://www.lttng.org/pub/thesis/desnoyers-dissertation-2009-12.pdf}
+[Viewed December 9, 2009]"
+}
diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt
index 51525a30e8b..790d1a81237 100644
--- a/Documentation/RCU/checklist.txt
+++ b/Documentation/RCU/checklist.txt
@@ -8,13 +8,12 @@ would cause. This list is based on experiences reviewing such patches
over a rather long period of time, but improvements are always welcome!
0. Is RCU being applied to a read-mostly situation? If the data
- structure is updated more than about 10% of the time, then
- you should strongly consider some other approach, unless
- detailed performance measurements show that RCU is nonetheless
- the right tool for the job. Yes, you might think of RCU
- as simply cutting overhead off of the readers and imposing it
- on the writers. That is exactly why normal uses of RCU will
- do much more reading than updating.
+ structure is updated more than about 10% of the time, then you
+ should strongly consider some other approach, unless detailed
+ performance measurements show that RCU is nonetheless the right
+ tool for the job. Yes, RCU does reduce read-side overhead by
+ increasing write-side overhead, which is exactly why normal uses
+ of RCU will do much more reading than updating.
Another exception is where performance is not an issue, and RCU
provides a simpler implementation. An example of this situation
@@ -35,13 +34,13 @@ over a rather long period of time, but improvements are always welcome!
If you choose #b, be prepared to describe how you have handled
memory barriers on weakly ordered machines (pretty much all of
- them -- even x86 allows reads to be reordered), and be prepared
- to explain why this added complexity is worthwhile. If you
- choose #c, be prepared to explain how this single task does not
- become a major bottleneck on big multiprocessor machines (for
- example, if the task is updating information relating to itself
- that other tasks can read, there by definition can be no
- bottleneck).
+ them -- even x86 allows later loads to be reordered to precede
+ earlier stores), and be prepared to explain why this added
+ complexity is worthwhile. If you choose #c, be prepared to
+ explain how this single task does not become a major bottleneck on
+ big multiprocessor machines (for example, if the task is updating
+ information relating to itself that other tasks can read, there
+ by definition can be no bottleneck).
2. Do the RCU read-side critical sections make proper use of
rcu_read_lock() and friends? These primitives are needed
@@ -51,8 +50,10 @@ over a rather long period of time, but improvements are always welcome!
actuarial risk of your kernel.
As a rough rule of thumb, any dereference of an RCU-protected
- pointer must be covered by rcu_read_lock() or rcu_read_lock_bh()
- or by the appropriate update-side lock.
+ pointer must be covered by rcu_read_lock(), rcu_read_lock_bh(),
+ rcu_read_lock_sched(), or by the appropriate update-side lock.
+ Disabling of preemption can serve as rcu_read_lock_sched(), but
+ is less readable.
3. Does the update code tolerate concurrent accesses?
@@ -62,25 +63,27 @@ over a rather long period of time, but improvements are always welcome!
of ways to handle this concurrency, depending on the situation:
a. Use the RCU variants of the list and hlist update
- primitives to add, remove, and replace elements on an
- RCU-protected list. Alternatively, use the RCU-protected
- trees that have been added to the Linux kernel.
+ primitives to add, remove, and replace elements on
+ an RCU-protected list. Alternatively, use the other
+ RCU-protected data structures that have been added to
+ the Linux kernel.
This is almost always the best approach.
b. Proceed as in (a) above, but also maintain per-element
locks (that are acquired by both readers and writers)
that guard per-element state. Of course, fields that
- the readers refrain from accessing can be guarded by the
- update-side lock.
+ the readers refrain from accessing can be guarded by
+ some other lock acquired only by updaters, if desired.
This works quite well, also.
c. Make updates appear atomic to readers. For example,
- pointer updates to properly aligned fields will appear
- atomic, as will individual atomic primitives. Operations
- performed under a lock and sequences of multiple atomic
- primitives will -not- appear to be atomic.
+ pointer updates to properly aligned fields will
+ appear atomic, as will individual atomic primitives.
+ Sequences of perations performed under a lock will -not-
+ appear to be atomic to RCU readers, nor will sequences
+ of multiple atomic primitives.
This can work, but is starting to get a bit tricky.
@@ -98,9 +101,9 @@ over a rather long period of time, but improvements are always welcome!
a new structure containing updated values.
4. Weakly ordered CPUs pose special challenges. Almost all CPUs
- are weakly ordered -- even i386 CPUs allow reads to be reordered.
- RCU code must take all of the following measures to prevent
- memory-corruption problems:
+ are weakly ordered -- even x86 CPUs allow later loads to be
+ reordered to precede earlier stores. RCU code must take all of
+ the following measures to prevent memory-corruption problems:
a. Readers must maintain proper ordering of their memory
accesses. The rcu_dereference() primitive ensures that
@@ -113,14 +116,25 @@ over a rather long period of time, but improvements are always welcome!
The rcu_dereference() primitive is also an excellent
documentation aid, letting the person reading the code
know exactly which pointers are protected by RCU.
-
- The rcu_dereference() primitive is used by the various
- "_rcu()" list-traversal primitives, such as the
- list_for_each_entry_rcu(). Note that it is perfectly
- legal (if redundant) for update-side code to use
- rcu_dereference() and the "_rcu()" list-traversal
- primitives. This is particularly useful in code
- that is common to readers and updaters.
+ Please note that compilers can also reorder code, and
+ they are becoming increasingly aggressive about doing
+ just that. The rcu_dereference() primitive therefore
+ also prevents destructive compiler optimizations.
+
+ The rcu_dereference() primitive is used by the
+ various "_rcu()" list-traversal primitives, such
+ as the list_for_each_entry_rcu(). Note that it is
+ perfectly legal (if redundant) for update-side code to
+ use rcu_dereference() and the "_rcu()" list-traversal
+ primitives. This is particularly useful in code that
+ is common to readers and updaters. However, lockdep
+ will complain if you access rcu_dereference() outside
+ of an RCU read-side critical section. See lockdep.txt
+ to learn what to do about this.
+
+ Of course, neither rcu_dereference() nor the "_rcu()"
+ list-traversal primitives can substitute for a good
+ concurrency design coordinating among multiple updaters.
b. If the list macros are being used, the list_add_tail_rcu()
and list_add_rcu() primitives must be used in order
@@ -135,11 +149,14 @@ over a rather long period of time, but improvements are always welcome!
readers. Similarly, if the hlist macros are being used,
the hlist_del_rcu() primitive is required.
- The list_replace_rcu() primitive may be used to
- replace an old structure with a new one in an
- RCU-protected list.
+ The list_replace_rcu() and hlist_replace_rcu() primitives
+ may be used to replace an old structure with a new one
+ in their respective types of RCU-protected lists.
+
+ d. Rules similar to (4b) and (4c) apply to the "hlist_nulls"
+ type of RCU-protected linked lists.
- d. Updates must ensure that initialization of a given
+ e. Updates must ensure that initialization of a given
structure happens before pointers to that structure are
publicized. Use the rcu_assign_pointer() primitive
when publicizing a pointer to a structure that can
@@ -151,16 +168,31 @@ over a rather long period of time, but improvements are always welcome!
it cannot block.
6. Since synchronize_rcu() can block, it cannot be called from
- any sort of irq context. Ditto for synchronize_sched() and
- synchronize_srcu().
-
-7. If the updater uses call_rcu(), then the corresponding readers
- must use rcu_read_lock() and rcu_read_unlock(). If the updater
- uses call_rcu_bh(), then the corresponding readers must use
- rcu_read_lock_bh() and rcu_read_unlock_bh(). If the updater
- uses call_rcu_sched(), then the corresponding readers must
- disable preemption. Mixing things up will result in confusion
- and broken kernels.
+ any sort of irq context. The same rule applies for
+ synchronize_rcu_bh(), synchronize_sched(), synchronize_srcu(),
+ synchronize_rcu_expedited(), synchronize_rcu_bh_expedited(),
+ synchronize_sched_expedite(), and synchronize_srcu_expedited().
+
+ The expedited forms of these primitives have the same semantics
+ as the non-expedited forms, but expediting is both expensive
+ and unfriendly to real-time workloads. Use of the expedited
+ primitives should be restricted to rare configuration-change
+ operations that would not normally be undertaken while a real-time
+ workload is running.
+
+7. If the updater uses call_rcu() or synchronize_rcu(), then the
+ corresponding readers must use rcu_read_lock() and
+ rcu_read_unlock(). If the updater uses call_rcu_bh() or
+ synchronize_rcu_bh(), then the corresponding readers must
+ use rcu_read_lock_bh() and rcu_read_unlock_bh(). If the
+ updater uses call_rcu_sched() or synchronize_sched(), then
+ the corresponding readers must disable preemption, possibly
+ by calling rcu_read_lock_sched() and rcu_read_unlock_sched().
+ If the updater uses synchronize_srcu(), the the corresponding
+ readers must use srcu_read_lock() and srcu_read_unlock(),
+ and with the same srcu_struct. The rules for the expedited
+ primitives are the same as for their non-expedited counterparts.
+ Mixing things up will result in confusion and broken kernels.
One exception to this rule: rcu_read_lock() and rcu_read_unlock()
may be substituted for rcu_read_lock_bh() and rcu_read_unlock_bh()
@@ -212,6 +244,8 @@ over a rather long period of time, but improvements are always welcome!
e. Periodically invoke synchronize_rcu(), permitting a limited
number of updates per grace period.
+ The same cautions apply to call_rcu_bh() and call_rcu_sched().
+
9. All RCU list-traversal primitives, which include
rcu_dereference(), list_for_each_entry_rcu(),
list_for_each_continue_rcu(), and list_for_each_safe_rcu(),
@@ -219,17 +253,21 @@ over a rather long period of time, but improvements are always welcome!
must be protected by appropriate update-side locks. RCU
read-side critical sections are delimited by rcu_read_lock()
and rcu_read_unlock(), or by similar primitives such as
- rcu_read_lock_bh() and rcu_read_unlock_bh().
+ rcu_read_lock_bh() and rcu_read_unlock_bh(), in which case
+ the matching rcu_dereference() primitive must be used in order
+ to keep lockdep happy, in this case, rcu_dereference_bh().
The reason that it is permissible to use RCU list-traversal
primitives when the update-side lock is held is that doing so
can be quite helpful in reducing code bloat when common code is
- shared between readers and updaters.
+ shared between readers and updaters. Additional primitives
+ are provided for this case, as discussed in lockdep.txt.
10. Conversely, if you are in an RCU read-side critical section,
and you don't hold the appropriate update-side lock, you -must-
use the "_rcu()" variants of the list macros. Failing to do so
- will break Alpha and confuse people reading your code.
+ will break Alpha, cause aggressive compilers to generate bad code,
+ and confuse people trying to read your code.
11. Note that synchronize_rcu() -only- guarantees to wait until
all currently executing rcu_read_lock()-protected RCU read-side
@@ -239,15 +277,21 @@ over a rather long period of time, but improvements are always welcome!
rcu_read_lock()-protected read-side critical sections, do -not-
use synchronize_rcu().
- If you want to wait for some of these other things, you might
- instead need to use synchronize_irq() or synchronize_sched().
+ Similarly, disabling preemption is not an acceptable substitute
+ for rcu_read_lock(). Code that attempts to use preemption
+ disabling where it should be using rcu_read_lock() will break
+ in real-time kernel builds.
+
+ If you want to wait for interrupt handlers, NMI handlers, and
+ code under the influence of preempt_disable(), you instead
+ need to use synchronize_irq() or synchronize_sched().
12. Any lock acquired by an RCU callback must be acquired elsewhere
with softirq disabled, e.g., via spin_lock_irqsave(),
spin_lock_bh(), etc. Failing to disable irq on a given
- acquisition of that lock will result in deadlock as soon as the
- RCU callback happens to interrupt that acquisition's critical
- section.
+ acquisition of that lock will result in deadlock as soon as
+ the RCU softirq handler happens to run your RCU callback while
+ interrupting that acquisition's critical section.
13. RCU callbacks can be and are executed in parallel. In many cases,
the callback code simply wrappers around kfree(), so that this
@@ -265,29 +309,30 @@ over a rather long period of time, but improvements are always welcome!
not the case, a self-spawning RCU callback would prevent the
victim CPU from ever going offline.)
-14. SRCU (srcu_read_lock(), srcu_read_unlock(), and synchronize_srcu())
- may only be invoked from process context. Unlike other forms of
- RCU, it -is- permissible to block in an SRCU read-side critical
- section (demarked by srcu_read_lock() and srcu_read_unlock()),
- hence the "SRCU": "sleepable RCU". Please note that if you
- don't need to sleep in read-side critical sections, you should
- be using RCU rather than SRCU, because RCU is almost always
- faster and easier to use than is SRCU.
+14. SRCU (srcu_read_lock(), srcu_read_unlock(), srcu_dereference(),
+ synchronize_srcu(), and synchronize_srcu_expedited()) may only
+ be invoked from process context. Unlike other forms of RCU, it
+ -is- permissible to block in an SRCU read-side critical section
+ (demarked by srcu_read_lock() and srcu_read_unlock()), hence the
+ "SRCU": "sleepable RCU". Please note that if you don't need
+ to sleep in read-side critical sections, you should be using
+ RCU rather than SRCU, because RCU is almost always faster and
+ easier to use than is SRCU.
Also unlike other forms of RCU, explicit initialization
and cleanup is required via init_srcu_struct() and
cleanup_srcu_struct(). These are passed a "struct srcu_struct"
that defines the scope of a given SRCU domain. Once initialized,
the srcu_struct is passed to srcu_read_lock(), srcu_read_unlock()
- and synchronize_srcu(). A given synchronize_srcu() waits only
- for SRCU read-side critical sections governed by srcu_read_lock()
- and srcu_read_unlock() calls that have been passd the same
- srcu_struct. This property is what makes sleeping read-side
- critical sections tolerable -- a given subsystem delays only
- its own updates, not those of other subsystems using SRCU.
- Therefore, SRCU is less prone to OOM the system than RCU would
- be if RCU's read-side critical sections were permitted to
- sleep.
+ synchronize_srcu(), and synchronize_srcu_expedited(). A given
+ synchronize_srcu() waits only for SRCU read-side critical
+ sections governed by srcu_read_lock() and srcu_read_unlock()
+ calls that have been passed the same srcu_struct. This property
+ is what makes sleeping read-side critical sections tolerable --
+ a given subsystem delays only its own updates, not those of other
+ subsystems using SRCU. Therefore, SRCU is less prone to OOM the
+ system than RCU would be if RCU's read-side critical sections
+ were permitted to sleep.
The ability to sleep in read-side critical sections does not
come for free. First, corresponding srcu_read_lock() and
@@ -300,8 +345,8 @@ over a rather long period of time, but improvements are always welcome!
requiring SRCU's read-side deadlock immunity or low read-side
realtime latency.
- Note that, rcu_assign_pointer() and rcu_dereference() relate to
- SRCU just as they do to other forms of RCU.
+ Note that, rcu_assign_pointer() relates to SRCU just as they do
+ to other forms of RCU.
15. The whole point of call_rcu(), synchronize_rcu(), and friends
is to wait until all pre-existing readers have finished before
@@ -311,12 +356,12 @@ over a rather long period of time, but improvements are always welcome!
destructive operation, and -only- -then- invoke call_rcu(),
synchronize_rcu(), or friends.
- Because these primitives only wait for pre-existing readers,
- it is the caller's responsibility to guarantee safety to
- any subsequent readers.
+ Because these primitives only wait for pre-existing readers, it
+ is the caller's responsibility to guarantee that any subsequent
+ readers will execute safely.
-16. The various RCU read-side primitives do -not- contain memory
- barriers. The CPU (and in some cases, the compiler) is free
- to reorder code into and out of RCU read-side critical sections.
- It is the responsibility of the RCU update-side primitives to
- deal with this.
+16. The various RCU read-side primitives do -not- necessarily contain
+ memory barriers. You should therefore plan for the CPU
+ and the compiler to freely reorder code into and out of RCU
+ read-side critical sections. It is the responsibility of the
+ RCU update-side primitives to deal with this.
diff --git a/Documentation/RCU/lockdep.txt b/Documentation/RCU/lockdep.txt
new file mode 100644
index 00000000000..d7a49b2f699
--- /dev/null
+++ b/Documentation/RCU/lockdep.txt
@@ -0,0 +1,91 @@
+RCU and lockdep checking
+
+All flavors of RCU have lockdep checking available, so that lockdep is
+aware of when each task enters and leaves any flavor of RCU read-side
+critical section. Each flavor of RCU is tracked separately (but note
+that this is not the case in 2.6.32 and earlier). This allows lockdep's
+tracking to include RCU state, which can sometimes help when debugging
+deadlocks and the like.
+
+In addition, RCU provides the following primitives that check lockdep's
+state:
+
+ rcu_read_lock_held() for normal RCU.
+ rcu_read_lock_bh_held() for RCU-bh.
+ rcu_read_lock_sched_held() for RCU-sched.
+ srcu_read_lock_held() for SRCU.
+
+These functions are conservative, and will therefore return 1 if they
+aren't certain (for example, if CONFIG_DEBUG_LOCK_ALLOC is not set).
+This prevents things like WARN_ON(!rcu_read_lock_held()) from giving false
+positives when lockdep is disabled.
+
+In addition, a separate kernel config parameter CONFIG_PROVE_RCU enables
+checking of rcu_dereference() primitives:
+
+ rcu_dereference(p):
+ Check for RCU read-side critical section.
+ rcu_dereference_bh(p):
+ Check for RCU-bh read-side critical section.
+ rcu_dereference_sched(p):
+ Check for RCU-sched read-side critical section.
+ srcu_dereference(p, sp):
+ Check for SRCU read-side critical section.
+ rcu_dereference_check(p, c):
+ Use explicit check expression "c". This is useful in
+ code that is invoked by both readers and updaters.
+ rcu_dereference_raw(p)
+ Don't check. (Use sparingly, if at all.)
+ rcu_dereference_protected(p, c):
+ Use explicit check expression "c", and omit all barriers
+ and compiler constraints. This is useful when the data
+ structure cannot change, for example, in code that is
+ invoked only by updaters.
+ rcu_access_pointer(p):
+ Return the value of the pointer and omit all barriers,
+ but retain the compiler constraints that prevent duplicating
+ or coalescsing. This is useful when when testing the
+ value of the pointer itself, for example, against NULL.
+
+The rcu_dereference_check() check expression can be any boolean
+expression, but would normally include one of the rcu_read_lock_held()
+family of functions and a lockdep expression. However, any boolean
+expression can be used. For a moderately ornate example, consider
+the following:
+
+ file = rcu_dereference_check(fdt->fd[fd],
+ rcu_read_lock_held() ||
+ lockdep_is_held(&files->file_lock) ||
+ atomic_read(&files->count) == 1);
+
+This expression picks up the pointer "fdt->fd[fd]" in an RCU-safe manner,
+and, if CONFIG_PROVE_RCU is configured, verifies that this expression
+is used in:
+
+1. An RCU read-side critical section, or
+2. with files->file_lock held, or
+3. on an unshared files_struct.
+
+In case (1), the pointer is picked up in an RCU-safe manner for vanilla
+RCU read-side critical sections, in case (2) the ->file_lock prevents
+any change from taking place, and finally, in case (3) the current task
+is the only task accessing the file_struct, again preventing any change
+from taking place. If the above statement was invoked only from updater
+code, it could instead be written as follows:
+
+ file = rcu_dereference_protected(fdt->fd[fd],
+ lockdep_is_held(&files->file_lock) ||
+ atomic_read(&files->count) == 1);
+
+This would verify cases #2 and #3 above, and furthermore lockdep would
+complain if this was used in an RCU read-side critical section unless one
+of these two cases held. Because rcu_dereference_protected() omits all
+barriers and compiler constraints, it generates better code than do the
+other flavors of rcu_dereference(). On the other hand, it is illegal
+to use rcu_dereference_protected() if either the RCU-protected pointer
+or the RCU-protected data that it points to can change concurrently.
+
+There are currently only "universal" versions of the rcu_assign_pointer()
+and RCU list-/tree-traversal primitives, which do not (yet) check for
+being in an RCU read-side critical section. In the future, separate
+versions of these primitives might be created.
diff --git a/Documentation/RCU/rcu.txt b/Documentation/RCU/rcu.txt
index 2a23523ce47..31852705b58 100644
--- a/Documentation/RCU/rcu.txt
+++ b/Documentation/RCU/rcu.txt
@@ -75,6 +75,8 @@ o I hear that RCU is patented? What is with that?
search for the string "Patent" in RTFP.txt to find them.
Of these, one was allowed to lapse by the assignee, and the
others have been contributed to the Linux kernel under GPL.
+ There are now also LGPL implementations of user-level RCU
+ available (http://lttng.org/?q=node/18).
o I hear that RCU needs work in order to support realtime kernels?
@@ -91,48 +93,4 @@ o Where can I find more information on RCU?
o What are all these files in this directory?
-
- NMI-RCU.txt
-
- Describes how to use RCU to implement dynamic
- NMI handlers, which can be revectored on the fly,
- without rebooting.
-
- RTFP.txt
-
- List of RCU-related publications and web sites.
-
- UP.txt
-
- Discussion of RCU usage in UP kernels.
-
- arrayRCU.txt
-
- Describes how to use RCU to protect arrays, with
- resizeable arrays whose elements reference other
- data structures being of the most interest.
-
- checklist.txt
-
- Lists things to check for when inspecting code that
- uses RCU.
-
- listRCU.txt
-
- Describes how to use RCU to protect linked lists.
- This is the simplest and most common use of RCU
- in the Linux kernel.
-
- rcu.txt
-
- You are reading it!
-
- rcuref.txt
-
- Describes how to combine use of reference counts
- with RCU.
-
- whatisRCU.txt
-
- Overview of how the RCU implementation works. Along
- the way, presents a conceptual view of RCU.
+ See 00-INDEX for the list.
diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt
new file mode 100644
index 00000000000..44c6dcc93d6
--- /dev/null
+++ b/Documentation/RCU/stallwarn.txt
@@ -0,0 +1,106 @@
+Using RCU's CPU Stall Detector
+
+The CONFIG_RCU_CPU_STALL_DETECTOR kernel config parameter enables
+RCU's CPU stall detector, which detects conditions that unduly delay
+RCU grace periods. The stall detector's idea of what constitutes
+"unduly delayed" is controlled by a set of C preprocessor macros:
+
+RCU_SECONDS_TILL_STALL_CHECK
+
+ This macro defines the period of time that RCU will wait from
+ the beginning of a grace period until it issues an RCU CPU
+ stall warning. This time period is normally ten seconds.
+
+RCU_SECONDS_TILL_STALL_RECHECK
+
+ This macro defines the period of time that RCU will wait after
+ issuing a stall warning until it issues another stall warning
+ for the same stall. This time period is normally set to thirty
+ seconds.
+
+RCU_STALL_RAT_DELAY
+
+ The CPU stall detector tries to make the offending CPU print its
+ own warnings, as this often gives better-quality stack traces.
+ However, if the offending CPU does not detect its own stall in
+ the number of jiffies specified by RCU_STALL_RAT_DELAY, then
+ some other CPU will complain. This delay is normally set to
+ two jiffies.
+
+When a CPU detects that it is stalling, it will print a message similar
+to the following:
+
+INFO: rcu_sched_state detected stall on CPU 5 (t=2500 jiffies)
+
+This message indicates that CPU 5 detected that it was causing a stall,
+and that the stall was affecting RCU-sched. This message will normally be
+followed by a stack dump of the offending CPU. On TREE_RCU kernel builds,
+RCU and RCU-sched are implemented by the same underlying mechanism,
+while on TREE_PREEMPT_RCU kernel builds, RCU is instead implemented
+by rcu_preempt_state.
+
+On the other hand, if the offending CPU fails to print out a stall-warning
+message quickly enough, some other CPU will print a message similar to
+the following:
+
+INFO: rcu_bh_state detected stalls on CPUs/tasks: { 3 5 } (detected by 2, 2502 jiffies)
+
+This message indicates that CPU 2 detected that CPUs 3 and 5 were both
+causing stalls, and that the stall was affecting RCU-bh. This message
+will normally be followed by stack dumps for each CPU. Please note that
+TREE_PREEMPT_RCU builds can be stalled by tasks as well as by CPUs,
+and that the tasks will be indicated by PID, for example, "P3421".
+It is even possible for a rcu_preempt_state stall to be caused by both
+CPUs -and- tasks, in which case the offending CPUs and tasks will all
+be called out in the list.
+
+Finally, if the grace period ends just as the stall warning starts
+printing, there will be a spurious stall-warning message:
+
+INFO: rcu_bh_state detected stalls on CPUs/tasks: { } (detected by 4, 2502 jiffies)
+
+This is rare, but does happen from time to time in real life.
+
+So your kernel printed an RCU CPU stall warning. The next question is
+"What caused it?" The following problems can result in RCU CPU stall
+warnings:
+
+o A CPU looping in an RCU read-side critical section.
+
+o A CPU looping with interrupts disabled. This condition can
+ result in RCU-sched and RCU-bh stalls.
+
+o A CPU looping with preemption disabled. This condition can
+ result in RCU-sched stalls and, if ksoftirqd is in use, RCU-bh
+ stalls.
+
+o A CPU looping with bottom halves disabled. This condition can
+ result in RCU-sched and RCU-bh stalls.
+
+o For !CONFIG_PREEMPT kernels, a CPU looping anywhere in the kernel
+ without invoking schedule().
+
+o A bug in the RCU implementation.
+
+o A hardware failure. This is quite unlikely, but has occurred
+ at least once in real life. A CPU failed in a running system,
+ becoming unresponsive, but not causing an immediate crash.
+ This resulted in a series of RCU CPU stall warnings, eventually
+ leading the realization that the CPU had failed.
+
+The RCU, RCU-sched, and RCU-bh implementations have CPU stall
+warning. SRCU does not have its own CPU stall warnings, but its
+calls to synchronize_sched() will result in RCU-sched detecting
+RCU-sched-related CPU stalls. Please note that RCU only detects
+CPU stalls when there is a grace period in progress. No grace period,
+no CPU stall warnings.
+
+To diagnose the cause of the stall, inspect the stack traces.
+The offending function will usually be near the top of the stack.
+If you have a series of stall warnings from a single extended stall,
+comparing the stack traces can often help determine where the stall
+is occurring, which will usually be in the function nearest the top of
+that portion of the stack which remains the same from trace to trace.
+If you can reliably trigger the stall, ftrace can be quite helpful.
+
+RCU bugs can often be debugged with the help of CONFIG_RCU_TRACE.
diff --git a/Documentation/RCU/torture.txt b/Documentation/RCU/torture.txt
index 9dba3bb90e6..5d9016795fd 100644
--- a/Documentation/RCU/torture.txt
+++ b/Documentation/RCU/torture.txt
@@ -30,6 +30,18 @@ MODULE PARAMETERS
This module has the following parameters:
+fqs_duration Duration (in microseconds) of artificially induced bursts
+ of force_quiescent_state() invocations. In RCU
+ implementations having force_quiescent_state(), these
+ bursts help force races between forcing a given grace
+ period and that grace period ending on its own.
+
+fqs_holdoff Holdoff time (in microseconds) between consecutive calls
+ to force_quiescent_state() within a burst.
+
+fqs_stutter Wait time (in seconds) between consecutive bursts
+ of calls to force_quiescent_state().
+
irqreaders Says to invoke RCU readers from irq level. This is currently
done via timers. Defaults to "1" for variants of RCU that
permit this. (Or, more accurately, variants of RCU that do
@@ -170,16 +182,6 @@ Similarly, sched_expedited RCU provides the following:
sched_expedited-torture: Reader Pipe: 12660320201 95875 0 0 0 0 0 0 0 0 0
sched_expedited-torture: Reader Batch: 12660424885 0 0 0 0 0 0 0 0 0 0
sched_expedited-torture: Free-Block Circulation: 1090795 1090795 1090794 1090793 1090792 1090791 1090790 1090789 1090788 1090787 0
- state: -1 / 0:0 3:0 4:0
-
-As before, the first four lines are similar to those for RCU.
-The last line shows the task-migration state. The first number is
--1 if synchronize_sched_expedited() is idle, -2 if in the process of
-posting wakeups to the migration kthreads, and N when waiting on CPU N.
-Each of the colon-separated fields following the "/" is a CPU:state pair.
-Valid states are "0" for idle, "1" for waiting for quiescent state,
-"2" for passed through quiescent state, and "3" when a race with a
-CPU-hotplug event forces use of the synchronize_sched() primitive.
USAGE
diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt
index 8608fd85e92..efd8cc95c06 100644
--- a/Documentation/RCU/trace.txt
+++ b/Documentation/RCU/trace.txt
@@ -256,23 +256,23 @@ o Each element of the form "1/1 0:127 ^0" represents one struct
The output of "cat rcu/rcu_pending" looks as follows:
rcu_sched:
- 0 np=255892 qsp=53936 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741
- 1 np=261224 qsp=54638 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792
- 2 np=237496 qsp=49664 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629
- 3 np=236249 qsp=48766 cbr=0 cng=286 gpc=48049 gps=1218 nf=207 nn=137723
- 4 np=221310 qsp=46850 cbr=0 cng=26 gpc=43161 gps=4634 nf=3529 nn=123110
- 5 np=237332 qsp=48449 cbr=0 cng=54 gpc=47920 gps=3252 nf=201 nn=137456
- 6 np=219995 qsp=46718 cbr=0 cng=50 gpc=42098 gps=6093 nf=4202 nn=120834
- 7 np=249893 qsp=49390 cbr=0 cng=72 gpc=38400 gps=17102 nf=41 nn=144888
+ 0 np=255892 qsp=53936 rpq=85 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741
+ 1 np=261224 qsp=54638 rpq=33 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792
+ 2 np=237496 qsp=49664 rpq=23 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629
+ 3 np=236249 qsp=48766 rpq=98 cbr=0 cng=286 gpc=48049 gps=1218 nf=207 nn=137723
+ 4 np=221310 qsp=46850 rpq=7 cbr=0 cng=26 gpc=43161 gps=4634 nf=3529 nn=123110
+ 5 np=237332 qsp=48449 rpq=9 cbr=0 cng=54 gpc=47920 gps=3252 nf=201 nn=137456
+ 6 np=219995 qsp=46718 rpq=12 cbr=0 cng=50 gpc=42098 gps=6093 nf=4202 nn=120834
+ 7 np=249893 qsp=49390 rpq=42 cbr=0 cng=72 gpc=38400 gps=17102 nf=41 nn=144888
rcu_bh:
- 0 np=146741 qsp=1419 cbr=0 cng=6 gpc=0 gps=0 nf=2 nn=145314
- 1 np=155792 qsp=12597 cbr=0 cng=0 gpc=4 gps=8 nf=3 nn=143180
- 2 np=136629 qsp=18680 cbr=0 cng=0 gpc=7 gps=6 nf=0 nn=117936
- 3 np=137723 qsp=2843 cbr=0 cng=0 gpc=10 gps=7 nf=0 nn=134863
- 4 np=123110 qsp=12433 cbr=0 cng=0 gpc=4 gps=2 nf=0 nn=110671
- 5 np=137456 qsp=4210 cbr=0 cng=0 gpc=6 gps=5 nf=0 nn=133235
- 6 np=120834 qsp=9902 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921
- 7 np=144888 qsp=26336 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542
+ 0 np=146741 qsp=1419 rpq=6 cbr=0 cng=6 gpc=0 gps=0 nf=2 nn=145314
+ 1 np=155792 qsp=12597 rpq=3 cbr=0 cng=0 gpc=4 gps=8 nf=3 nn=143180
+ 2 np=136629 qsp=18680 rpq=1 cbr=0 cng=0 gpc=7 gps=6 nf=0 nn=117936
+ 3 np=137723 qsp=2843 rpq=0 cbr=0 cng=0 gpc=10 gps=7 nf=0 nn=134863
+ 4 np=123110 qsp=12433 rpq=0 cbr=0 cng=0 gpc=4 gps=2 nf=0 nn=110671
+ 5 np=137456 qsp=4210 rpq=1 cbr=0 cng=0 gpc=6 gps=5 nf=0 nn=133235
+ 6 np=120834 qsp=9902 rpq=2 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921
+ 7 np=144888 qsp=26336 rpq=0 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542
As always, this is once again split into "rcu_sched" and "rcu_bh"
portions, with CONFIG_TREE_PREEMPT_RCU kernels having an additional
@@ -284,6 +284,9 @@ o "np" is the number of times that __rcu_pending() has been invoked
o "qsp" is the number of times that the RCU was waiting for a
quiescent state from this CPU.
+o "rpq" is the number of times that the CPU had passed through
+ a quiescent state, but not yet reported it to RCU.
+
o "cbr" is the number of times that this CPU had RCU callbacks
that had passed through a grace period, and were thus ready
to be invoked.
diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt
index d542ca243b8..cfaac34c455 100644
--- a/Documentation/RCU/whatisRCU.txt
+++ b/Documentation/RCU/whatisRCU.txt
@@ -323,14 +323,17 @@ used as follows:
Defer Protect
a. synchronize_rcu() rcu_read_lock() / rcu_read_unlock()
- call_rcu()
+ call_rcu() rcu_dereference()
b. call_rcu_bh() rcu_read_lock_bh() / rcu_read_unlock_bh()
+ rcu_dereference_bh()
-c. synchronize_sched() preempt_disable() / preempt_enable()
+c. synchronize_sched() rcu_read_lock_sched() / rcu_read_unlock_sched()
+ preempt_disable() / preempt_enable()
local_irq_save() / local_irq_restore()
hardirq enter / hardirq exit
NMI enter / NMI exit
+ rcu_dereference_sched()
These three mechanisms are used as follows:
@@ -780,9 +783,8 @@ Linux-kernel source code, but it helps to have a full list of the
APIs, since there does not appear to be a way to categorize them
in docbook. Here is the list, by category.
-RCU pointer/list traversal:
+RCU list traversal:
- rcu_dereference
list_for_each_entry_rcu
hlist_for_each_entry_rcu
hlist_nulls_for_each_entry_rcu
@@ -808,7 +810,7 @@ RCU: Critical sections Grace period Barrier
rcu_read_lock synchronize_net rcu_barrier
rcu_read_unlock synchronize_rcu
- synchronize_rcu_expedited
+ rcu_dereference synchronize_rcu_expedited
call_rcu
@@ -816,7 +818,7 @@ bh: Critical sections Grace period Barrier
rcu_read_lock_bh call_rcu_bh rcu_barrier_bh
rcu_read_unlock_bh synchronize_rcu_bh
- synchronize_rcu_bh_expedited
+ rcu_dereference_bh synchronize_rcu_bh_expedited
sched: Critical sections Grace period Barrier
@@ -825,17 +827,25 @@ sched: Critical sections Grace period Barrier
rcu_read_unlock_sched call_rcu_sched
[preempt_disable] synchronize_sched_expedited
[and friends]
+ rcu_dereference_sched
SRCU: Critical sections Grace period Barrier
srcu_read_lock synchronize_srcu N/A
srcu_read_unlock synchronize_srcu_expedited
+ srcu_dereference
SRCU: Initialization/cleanup
init_srcu_struct
cleanup_srcu_struct
+All: lockdep-checked RCU-protected pointer access
+
+ rcu_dereference_check
+ rcu_dereference_protected
+ rcu_access_pointer
+
See the comment headers in the source code (or the docbook generated
from them) for more information.
diff --git a/Documentation/Smack.txt b/Documentation/Smack.txt
index 34614b4c708..e9dab41c0fe 100644
--- a/Documentation/Smack.txt
+++ b/Documentation/Smack.txt
@@ -73,7 +73,7 @@ NOTE: Smack labels are limited to 23 characters. The attr command
If you don't do anything special all users will get the floor ("_")
label when they log in. If you do want to log in via the hacked ssh
at other labels use the attr command to set the smack value on the
-home directory and it's contents.
+home directory and its contents.
You can add access rules in /etc/smack/accesses. They take the form:
diff --git a/Documentation/SubmitChecklist b/Documentation/SubmitChecklist
index 1053a56be3b..da0382daa39 100644
--- a/Documentation/SubmitChecklist
+++ b/Documentation/SubmitChecklist
@@ -9,10 +9,16 @@ Documentation/SubmittingPatches and elsewhere regarding submitting Linux
kernel patches.
-1: Builds cleanly with applicable or modified CONFIG options =y, =m, and
+1: If you use a facility then #include the file that defines/declares
+ that facility. Don't depend on other header files pulling in ones
+ that you use.
+
+2: Builds cleanly with applicable or modified CONFIG options =y, =m, and
=n. No gcc warnings/errors, no linker warnings/errors.
-2: Passes allnoconfig, allmodconfig
+2b: Passes allnoconfig, allmodconfig
+
+2c: Builds successfully when using O=builddir
3: Builds on multiple CPU architectures by using local cross-compile tools
or some other build farm.
@@ -91,3 +97,13 @@ kernel patches.
25: If any ioctl's are added by the patch, then also update
Documentation/ioctl/ioctl-number.txt.
+
+26: If your modified source code depends on or uses any of the kernel
+ APIs or features that are related to the following kconfig symbols,
+ then test multiple builds with the related kconfig symbols disabled
+ and/or =m (if that option is available) [not all of these at the
+ same time, just various/random combinations of them]:
+
+ CONFIG_SMP, CONFIG_SYSFS, CONFIG_PROC_FS, CONFIG_INPUT, CONFIG_PCI,
+ CONFIG_BLOCK, CONFIG_PM, CONFIG_HOTPLUG, CONFIG_MAGIC_SYSRQ,
+ CONFIG_NET, CONFIG_INET=n (but latter with CONFIG_NET=y)
diff --git a/Documentation/SubmittingDrivers b/Documentation/SubmittingDrivers
index 99e72a81fa2..38d2aab59ca 100644
--- a/Documentation/SubmittingDrivers
+++ b/Documentation/SubmittingDrivers
@@ -130,6 +130,8 @@ Linux kernel master tree:
ftp.??.kernel.org:/pub/linux/kernel/...
?? == your country code, such as "us", "uk", "fr", etc.
+ http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git
+
Linux kernel mailing list:
linux-kernel@vger.kernel.org
[mail majordomo@vger.kernel.org to subscribe]
@@ -159,4 +161,7 @@ How to NOT write kernel driver by Arjan van de Ven:
http://www.fenrus.org/how-to-not-write-a-device-driver-paper.pdf
Kernel Janitor:
- http://janitor.kernelnewbies.org/
+ http://kernelnewbies.org/KernelJanitors
+
+GIT, Fast Version Control System:
+ http://git-scm.com/
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 72651f788f4..689e2371095 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -98,6 +98,17 @@ system, git, as a "commit log". See #15, below.
If your description starts to get long, that's a sign that you probably
need to split up your patch. See #3, next.
+When you submit or resubmit a patch or patch series, include the
+complete patch description and justification for it. Don't just
+say that this is version N of the patch (series). Don't expect the
+patch merger to refer back to earlier patch versions or referenced
+URLs to find the patch description and put that into the patch.
+I.e., the patch (series) and its description should be self-contained.
+This benefits both the patch merger(s) and reviewers. Some reviewers
+probably didn't even receive earlier versions of the patch.
+
+If the patch fixes a logged bug entry, refer to that bug entry by
+number and URL.
3) Separate your changes.
diff --git a/Documentation/acpi/apei/einj.txt b/Documentation/acpi/apei/einj.txt
new file mode 100644
index 00000000000..dfab71848dc
--- /dev/null
+++ b/Documentation/acpi/apei/einj.txt
@@ -0,0 +1,59 @@
+ APEI Error INJection
+ ~~~~~~~~~~~~~~~~~~~~
+
+EINJ provides a hardware error injection mechanism
+It is very useful for debugging and testing of other APEI and RAS features.
+
+To use EINJ, make sure the following are enabled in your kernel
+configuration:
+
+CONFIG_DEBUG_FS
+CONFIG_ACPI_APEI
+CONFIG_ACPI_APEI_EINJ
+
+The user interface of EINJ is debug file system, under the
+directory apei/einj. The following files are provided.
+
+- available_error_type
+ Reading this file returns the error injection capability of the
+ platform, that is, which error types are supported. The error type
+ definition is as follow, the left field is the error type value, the
+ right field is error description.
+
+ 0x00000001 Processor Correctable
+ 0x00000002 Processor Uncorrectable non-fatal
+ 0x00000004 Processor Uncorrectable fatal
+ 0x00000008 Memory Correctable
+ 0x00000010 Memory Uncorrectable non-fatal
+ 0x00000020 Memory Uncorrectable fatal
+ 0x00000040 PCI Express Correctable
+ 0x00000080 PCI Express Uncorrectable fatal
+ 0x00000100 PCI Express Uncorrectable non-fatal
+ 0x00000200 Platform Correctable
+ 0x00000400 Platform Uncorrectable non-fatal
+ 0x00000800 Platform Uncorrectable fatal
+
+ The format of file contents are as above, except there are only the
+ available error type lines.
+
+- error_type
+ This file is used to set the error type value. The error type value
+ is defined in "available_error_type" description.
+
+- error_inject
+ Write any integer to this file to trigger the error
+ injection. Before this, please specify all necessary error
+ parameters.
+
+- param1
+ This file is used to set the first error parameter value. Effect of
+ parameter depends on error_type specified. For memory error, this is
+ physical memory address.
+
+- param2
+ This file is used to set the second error parameter value. Effect of
+ parameter depends on error_type specified. For memory error, this is
+ physical memory address mask.
+
+For more information about EINJ, please refer to ACPI specification
+version 4.0, section 17.5.
diff --git a/Documentation/acpi/method-customizing.txt b/Documentation/acpi/method-customizing.txt
index e628cd23ca8..3e1d25aee3f 100644
--- a/Documentation/acpi/method-customizing.txt
+++ b/Documentation/acpi/method-customizing.txt
@@ -19,6 +19,8 @@ Note: Only ACPI METHOD can be overridden, any other object types like
"Device", "OperationRegion", are not recognized.
Note: The same ACPI control method can be overridden for many times,
and it's always the latest one that used by Linux/kernel.
+Note: To get the ACPI debug object output (Store (AAAA, Debug)),
+ please run "echo 1 > /sys/module/acpi/parameters/aml_debug_output".
1. override an existing method
a) get the ACPI table via ACPI sysfs I/F. e.g. to get the DSDT,
diff --git a/Documentation/aoe/aoe.txt b/Documentation/aoe/aoe.txt
index 3a4dbe4663c..b5aada9f20c 100644
--- a/Documentation/aoe/aoe.txt
+++ b/Documentation/aoe/aoe.txt
@@ -1,6 +1,6 @@
The EtherDrive (R) HOWTO for users of 2.6 kernels is found at ...
- http://www.coraid.com/support/linux/EtherDrive-2.6-HOWTO.html
+ http://www.coraid.com/SUPPORT/EtherDrive-HBA
It has many tips and hints!
diff --git a/Documentation/apparmor.txt b/Documentation/apparmor.txt
new file mode 100644
index 00000000000..93c1fd7d063
--- /dev/null
+++ b/Documentation/apparmor.txt
@@ -0,0 +1,39 @@
+--- What is AppArmor? ---
+
+AppArmor is MAC style security extension for the Linux kernel. It implements
+a task centered policy, with task "profiles" being created and loaded
+from user space. Tasks on the system that do not have a profile defined for
+them run in an unconfined state which is equivalent to standard Linux DAC
+permissions.
+
+--- How to enable/disable ---
+
+set CONFIG_SECURITY_APPARMOR=y
+
+If AppArmor should be selected as the default security module then
+ set CONFIG_DEFAULT_SECURITY="apparmor"
+ and CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
+
+Build the kernel
+
+If AppArmor is not the default security module it can be enabled by passing
+security=apparmor on the kernel's command line.
+
+If AppArmor is the default security module it can be disabled by passing
+apparmor=0, security=XXXX (where XXX is valid security module), on the
+kernel's command line
+
+For AppArmor to enforce any restrictions beyond standard Linux DAC permissions
+policy must be loaded into the kernel from user space (see the Documentation
+and tools links).
+
+--- Documentation ---
+
+Documentation can be found on the wiki.
+
+--- Links ---
+
+Mailing List - apparmor@lists.ubuntu.com
+Wiki - http://apparmor.wiki.kernel.org/
+User space tools - https://launchpad.net/apparmor
+Kernel module - git://git.kernel.org/pub/scm/linux/kernel/git/jj/apparmor-dev.git
diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX
index 82e418d648d..7f5fc3ba9c9 100644
--- a/Documentation/arm/00-INDEX
+++ b/Documentation/arm/00-INDEX
@@ -20,6 +20,8 @@ Samsung-S3C24XX
- S3C24XX ARM Linux Overview
Sharp-LH
- Linux on Sharp LH79524 and LH7A40X System On a Chip (SOC)
+SPEAr
+ - ST SPEAr platform Linux Overview
VFP/
- Release notes for Linux Kernel Vector Floating Point support code
empeg/
diff --git a/Documentation/arm/IXP2000 b/Documentation/arm/IXP2000
index e0148b6b2c4..68d21d92a30 100644
--- a/Documentation/arm/IXP2000
+++ b/Documentation/arm/IXP2000
@@ -14,7 +14,7 @@ telecom systems. In addition to an XScale core, it contains up to 8
interfaces (UTOPIA, SPI, etc), a PCI host bridge, one serial port,
flash interface, and some other odds and ends. For more information, see:
-http://developer.intel.com/design/network/products/npfamily/ixp2xxx.htm
+http://developer.intel.com
2. Linux Support
diff --git a/Documentation/arm/IXP4xx b/Documentation/arm/IXP4xx
index 72fbcc4fcab..133c5fa6c7a 100644
--- a/Documentation/arm/IXP4xx
+++ b/Documentation/arm/IXP4xx
@@ -45,7 +45,7 @@ require the use of Intel's propietary CSR softare:
If you need to use any of the above, you need to download Intel's
software from:
- http://developer.intel.com/design/network/products/npfamily/ixp425swr1.htm
+ http://developer.intel.com/design/network/products/npfamily/ixp425.htm
DO NOT POST QUESTIONS TO THE LINUX MAILING LISTS REGARDING THE PROPIETARY
SOFTWARE.
@@ -53,7 +53,7 @@ SOFTWARE.
There are several websites that provide directions/pointers on using
Intel's software:
-http://ixp4xx-osdg.sourceforge.net/
+ http://sourceforge.net/projects/ixp4xx-osdg/
Open Source Developer's Guide for using uClinux and the Intel libraries
http://gatewaymaker.sourceforge.net/
@@ -112,21 +112,21 @@ http://www.adiengineering.com/productsCoyote.html
Finally, there is an IDE port hanging off the expansion bus.
Gateworks Avila Network Platform
-http://www.gateworks.com/avila_sbc.htm
+http://www.gateworks.com/support/overview.php
The Avila platform is basically and IXDP425 with the 4 PCI slots
replaced with mini-PCI slots and a CF IDE interface hanging off
the expansion bus.
Intel IXDP425 Development Platform
-http://developer.intel.com/design/network/products/npfamily/ixdp425.htm
+http://www.intel.com/design/network/products/npfamily/ixdpg425.htm
This is Intel's standard reference platform for the IXDP425 and is
also known as the Richfield board. It contains 4 PCI slots, 16MB
of flash, two 10/100 ports and one ADSL port.
Intel IXDP465 Development Platform
-http://developer.intel.com/design/network/products/npfamily/ixdp465.htm
+http://www.intel.com/design/network/products/npfamily/ixdp465.htm
This is basically an IXDP425 with an IXP465 and 32M of flash instead
of just 16.
@@ -141,15 +141,13 @@ Intel IXDPG425 Development Platform
a pivot_root to NFS.
Motorola PrPMC1100 Processor Mezanine Card
-http://www.fountainsys.com/datasheet/PrPMC1100.pdf
+http://www.fountainsys.com
The PrPMC1100 is based on the IXCP1100 and is meant to plug into
and IXP2400/2800 system to act as the system controller. It simply
contains a CPU and 16MB of flash on the board and needs to be
plugged into a carrier board to function. Currently Linux only
supports the Motorola PrPMC carrier board for this platform.
- See https://mcg.motorola.com/us/ds/pdf/ds0144.pdf for info
- on the carrier board.
5. TODO LIST
diff --git a/Documentation/arm/README b/Documentation/arm/README
index d98783fbe0c..aea34095cdc 100644
--- a/Documentation/arm/README
+++ b/Documentation/arm/README
@@ -41,12 +41,12 @@ Bug reports etc
---------------
Please send patches to the patch system. For more information, see
- http://www.arm.linux.org.uk/patches/info.html Always include some
+ http://www.arm.linux.org.uk/developer/patches/info.php Always include some
explanation as to what the patch does and why it is needed.
Bug reports should be sent to linux-arm-kernel@lists.arm.linux.org.uk,
or submitted through the web form at
- http://www.arm.linux.org.uk/forms/solution.shtml
+ http://www.arm.linux.org.uk/developer/
When sending bug reports, please ensure that they contain all relevant
information, eg. the kernel messages that were printed before/during
diff --git a/Documentation/arm/SA1100/ADSBitsy b/Documentation/arm/SA1100/ADSBitsy
index 7197a9e958e..f9f62e8c071 100644
--- a/Documentation/arm/SA1100/ADSBitsy
+++ b/Documentation/arm/SA1100/ADSBitsy
@@ -32,7 +32,7 @@ Notes:
- The flash on board is divided into 3 partitions.
You should be careful to use flash on board.
- It's partition is different from GraphicsClient Plus and GraphicsMaster
+ Its partition is different from GraphicsClient Plus and GraphicsMaster
- 16bpp mode requires a different cable than what ships with the board.
Contact ADS or look through the manual to wire your own. Currently,
diff --git a/Documentation/arm/SA1100/Assabet b/Documentation/arm/SA1100/Assabet
index 91f7ce7ba42..08b885d3567 100644
--- a/Documentation/arm/SA1100/Assabet
+++ b/Documentation/arm/SA1100/Assabet
@@ -2,8 +2,7 @@ The Intel Assabet (SA-1110 evaluation) board
============================================
Please see:
-http://developer.intel.com/design/strong/quicklist/eval-plat/sa-1110.htm
-http://developer.intel.com/design/strong/guides/278278.htm
+http://developer.intel.com
Also some notes from John G Dorsey <jd5q@andrew.cmu.edu>:
http://www.cs.cmu.edu/~wearable/software/assabet.html
@@ -64,7 +63,7 @@ Initial RedBoot configuration
-----------------------------
The commands used here are explained in The RedBoot User's Guide available
-on-line at http://sources.redhat.com/ecos/docs-latest/redboot/redboot.html.
+on-line at http://sources.redhat.com/ecos/docs.html.
Please refer to it for explanations.
If you have a CF network card (my Assabet kit contained a CF+ LP-E from
diff --git a/Documentation/arm/SA1100/Brutus b/Documentation/arm/SA1100/Brutus
index b1cfd405dcc..6a3aa95e9bf 100644
--- a/Documentation/arm/SA1100/Brutus
+++ b/Documentation/arm/SA1100/Brutus
@@ -1,7 +1,7 @@
Brutus is an evaluation platform for the SA1100 manufactured by Intel.
For more details, see:
-http://developer.intel.com/design/strong/applnots/sa1100lx/getstart.htm
+http://developer.intel.com
To compile for Brutus, you must issue the following commands:
diff --git a/Documentation/arm/SA1100/FreeBird b/Documentation/arm/SA1100/FreeBird
index eda28b3232e..fb23b770aaf 100644
--- a/Documentation/arm/SA1100/FreeBird
+++ b/Documentation/arm/SA1100/FreeBird
@@ -1,5 +1,5 @@
Freebird-1.1 is produced by Legned(C) ,Inc.
-(http://www.legend.com.cn)
+http://web.archive.org/web/*/http://www.legend.com.cn
and software/linux mainatined by Coventive(C),Inc.
(http://www.coventive.com)
diff --git a/Documentation/arm/SA1100/GraphicsClient b/Documentation/arm/SA1100/GraphicsClient
index 6c9c4f5a36e..867bb35943a 100644
--- a/Documentation/arm/SA1100/GraphicsClient
+++ b/Documentation/arm/SA1100/GraphicsClient
@@ -71,7 +71,7 @@ Supported peripherals:
- serial ports (ttyS[0-2])
- ttyS0 is default for serial console
- Smart I/O (ADC, keypad, digital inputs, etc)
- See http://www.applieddata.com/developers/linux for IOCTL documentation
+ See http://www.eurotech-inc.com/linux-sbc.asp for IOCTL documentation
and example user space code. ps/2 keybd is multiplexed through this driver
To do:
diff --git a/Documentation/arm/SA1100/GraphicsMaster b/Documentation/arm/SA1100/GraphicsMaster
index ee7c6595f23..9145088a0ba 100644
--- a/Documentation/arm/SA1100/GraphicsMaster
+++ b/Documentation/arm/SA1100/GraphicsMaster
@@ -28,7 +28,7 @@ Supported peripherals:
- serial ports (ttyS[0-2])
- ttyS0 is default for serial console
- Smart I/O (ADC, keypad, digital inputs, etc)
- See http://www.applieddata.com/developers/linux for IOCTL documentation
+ See http://www.eurotech-inc.com/linux-sbc.asp for IOCTL documentation
and example user space code. ps/2 keybd is multiplexed through this driver
To do:
diff --git a/Documentation/arm/SA1100/Itsy b/Documentation/arm/SA1100/Itsy
index 3b594534323..44b94997fa0 100644
--- a/Documentation/arm/SA1100/Itsy
+++ b/Documentation/arm/SA1100/Itsy
@@ -4,7 +4,7 @@ research projects at Compaq that are related to pocket computing.
For more information, see:
- http://www.research.digital.com/wrl/itsy/index.html
+ http://www.hpl.hp.com/downloads/crl/itsy/
Notes on initial 2.4 Itsy support (8/27/2000) :
The port was done on an Itsy version 1.5 machine with a daughtercard with
diff --git a/Documentation/arm/SA1100/PLEB b/Documentation/arm/SA1100/PLEB
index 92cae066908..b9c8a631a35 100644
--- a/Documentation/arm/SA1100/PLEB
+++ b/Documentation/arm/SA1100/PLEB
@@ -6,6 +6,6 @@ PLEB support has yet to be fully integrated.
For more information, see:
- http://www.cse.unsw.edu.au/~pleb/
+ http://www.cse.unsw.edu.au
diff --git a/Documentation/arm/SA1100/Victor b/Documentation/arm/SA1100/Victor
index f938a29fdc2..9cff415da5a 100644
--- a/Documentation/arm/SA1100/Victor
+++ b/Documentation/arm/SA1100/Victor
@@ -3,7 +3,7 @@ VisuAide, Inc. to be used by blind people.
For more information related to Victor, see:
- http://www.visuaide.com/victor
+ http://www.humanware.com/en-usa/products
Of course Victor is using Linux as its main operating system.
The Victor implementation for Linux is maintained by Nicolas Pitre:
diff --git a/Documentation/arm/SA1100/nanoEngine b/Documentation/arm/SA1100/nanoEngine
index fc431cbfefc..48a7934f95f 100644
--- a/Documentation/arm/SA1100/nanoEngine
+++ b/Documentation/arm/SA1100/nanoEngine
@@ -7,5 +7,5 @@ for more info.
(Ref: Stuart Adams <sja@brightstareng.com>)
Also visit Larry Doolittle's "Linux for the nanoEngine" site:
-http://recycle.lbl.gov/~ldoolitt/bse/
+http://www.brightstareng.com/arm/nanoeng.htm
diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt
new file mode 100644
index 00000000000..253a35c6f78
--- /dev/null
+++ b/Documentation/arm/SPEAr/overview.txt
@@ -0,0 +1,60 @@
+ SPEAr ARM Linux Overview
+ ==========================
+
+Introduction
+------------
+
+ SPEAr (Structured Processor Enhanced Architecture).
+ weblink : http://www.st.com/spear
+
+ The ST Microelectronics SPEAr range of ARM9/CortexA9 System-on-Chip CPUs are
+ supported by the 'spear' platform of ARM Linux. Currently SPEAr300,
+ SPEAr310, SPEAr320 and SPEAr600 SOCs are supported. Support for the SPEAr13XX
+ series is in progress.
+
+ Hierarchy in SPEAr is as follows:
+
+ SPEAr (Platform)
+ - SPEAr3XX (3XX SOC series, based on ARM9)
+ - SPEAr300 (SOC)
+ - SPEAr300_EVB (Evaluation Board)
+ - SPEAr310 (SOC)
+ - SPEAr310_EVB (Evaluation Board)
+ - SPEAr320 (SOC)
+ - SPEAr320_EVB (Evaluation Board)
+ - SPEAr6XX (6XX SOC series, based on ARM9)
+ - SPEAr600 (SOC)
+ - SPEAr600_EVB (Evaluation Board)
+ - SPEAr13XX (13XX SOC series, based on ARM CORTEXA9)
+ - SPEAr1300 (SOC)
+
+ Configuration
+ -------------
+
+ A generic configuration is provided for each machine, and can be used as the
+ default by
+ make spear600_defconfig
+ make spear300_defconfig
+ make spear310_defconfig
+ make spear320_defconfig
+
+ Layout
+ ------
+
+ The common files for multiple machine families (SPEAr3XX, SPEAr6XX and
+ SPEAr13XX) are located in the platform code contained in arch/arm/plat-spear
+ with headers in plat/.
+
+ Each machine series have a directory with name arch/arm/mach-spear followed by
+ series name. Like mach-spear3xx, mach-spear6xx and mach-spear13xx.
+
+ Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for
+ spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine
+ specific files, like spear300.c, spear310.c, spear320.c and spear600.c.
+ mach-spear* also contains board specific files for each machine type.
+
+
+ Document Author
+ ---------------
+
+ Viresh Kumar, (c) 2010 ST Microelectronics
diff --git a/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt
index 76b3a11e90b..fa968aa99d6 100644
--- a/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt
+++ b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt
@@ -14,8 +14,8 @@ Introduction
how the clocks are arranged. The first implementation used as single
PLL to feed the ARM, memory and peripherals via a series of dividers
and muxes and this is the implementation that is documented here. A
- newer version where there is a seperate PLL and clock divider for the
- ARM core is available as a seperate driver.
+ newer version where there is a separate PLL and clock divider for the
+ ARM core is available as a separate driver.
Layout
diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
index 2af2cf39915..816d6071669 100644
--- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt
+++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt
@@ -12,6 +12,8 @@ Introduction
of the s3c2410 GPIO system, please read the Samsung provided
data-sheet/users manual to find out the complete list.
+ See Documentation/arm/Samsung/GPIO.txt for the core implemetation.
+
GPIOLIB
-------
@@ -24,8 +26,60 @@ GPIOLIB
listed below will be removed (they may be marked as __deprecated
in the near future).
- - s3c2410_gpio_getpin
- - s3c2410_gpio_setpin
+ The following functions now either have a s3c_ specific variant
+ or are merged into gpiolib. See the definitions in
+ arch/arm/plat-samsung/include/plat/gpio-cfg.h:
+
+ s3c2410_gpio_setpin() gpio_set_value() or gpio_direction_output()
+ s3c2410_gpio_getpin() gpio_get_value() or gpio_direction_input()
+ s3c2410_gpio_getirq() gpio_to_irq()
+ s3c2410_gpio_cfgpin() s3c_gpio_cfgpin()
+ s3c2410_gpio_getcfg() s3c_gpio_getcfg()
+ s3c2410_gpio_pullup() s3c_gpio_setpull()
+
+
+GPIOLIB conversion
+------------------
+
+If you need to convert your board or driver to use gpiolib from the exiting
+s3c2410 api, then here are some notes on the process.
+
+1) If your board is exclusively using an GPIO, say to control peripheral
+ power, then it will require to claim the gpio with gpio_request() before
+ it can use it.
+
+ It is recommended to check the return value, with at least WARN_ON()
+ during initialisation.
+
+2) The s3c2410_gpio_cfgpin() can be directly replaced with s3c_gpio_cfgpin()
+ as they have the same arguments, and can either take the pin specific
+ values, or the more generic special-function-number arguments.
+
+3) s3c2410_gpio_pullup() changs have the problem that whilst the
+ s3c2410_gpio_pullup(x, 1) can be easily translated to the
+ s3c_gpio_setpull(x, S3C_GPIO_PULL_NONE), the s3c2410_gpio_pullup(x, 0)
+ are not so easy.
+
+ The s3c2410_gpio_pullup(x, 0) case enables the pull-up (or in the case
+ of some of the devices, a pull-down) and as such the new API distinguishes
+ between the UP and DOWN case. There is currently no 'just turn on' setting
+ which may be required if this becomes a problem.
+
+4) s3c2410_gpio_setpin() can be replaced by gpio_set_value(), the old call
+ does not implicitly configure the relevant gpio to output. The gpio
+ direction should be changed before using gpio_set_value().
+
+5) s3c2410_gpio_getpin() is replaceable by gpio_get_value() if the pin
+ has been set to input. It is currently unknown what the behaviour is
+ when using gpio_get_value() on an output pin (s3c2410_gpio_getpin
+ would return the value the pin is supposed to be outputting).
+
+6) s3c2410_gpio_getirq() should be directly replacable with the
+ gpio_to_irq() call.
+
+The s3c2410_gpio and gpio_ calls have always operated on the same gpio
+numberspace, so there is no problem with converting the gpio numbering
+between the calls.
Headers
@@ -54,6 +108,11 @@ PIN Numbers
eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
the GPIO functions which pin is to be used.
+ With the conversion to gpiolib, there is no longer a direct conversion
+ from gpio pin number to register base address as in earlier kernels. This
+ is due to the number space required for newer SoCs where the later
+ GPIOs are not contiguous.
+
Configuring a pin
-----------------
@@ -71,6 +130,8 @@ Configuring a pin
which would turn GPA(0) into the lowest Address line A0, and set
GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
+ The s3c_gpio_cfgpin() call is a functional replacement for this call.
+
Reading the current configuration
---------------------------------
@@ -82,6 +143,9 @@ Reading the current configuration
The return value will be from the same set of values which can be
passed to s3c2410_gpio_cfgpin().
+ The s3c_gpio_getcfg() call should be a functional replacement for
+ this call.
+
Configuring a pull-up resistor
------------------------------
@@ -95,6 +159,10 @@ Configuring a pull-up resistor
Where the to value is zero to set the pull-up off, and 1 to enable
the specified pull-up. Any other values are currently undefined.
+ The s3c_gpio_setpull() offers similar functionality, but with the
+ ability to encode whether the pull is up or down. Currently there
+ is no 'just on' state, so up or down must be selected.
+
Getting the state of a PIN
--------------------------
@@ -106,6 +174,9 @@ Getting the state of a PIN
This will return either zero or non-zero. Do not count on this
function returning 1 if the pin is set.
+ This call is now implemented by the relevant gpiolib calls, convert
+ your board or driver to use gpiolib.
+
Setting the state of a PIN
--------------------------
@@ -117,6 +188,9 @@ Setting the state of a PIN
Which sets the given pin to the value. Use 0 to write 0, and 1 to
set the output to 1.
+ This call is now implemented by the relevant gpiolib calls, convert
+ your board or driver to use gpiolib.
+
Getting the IRQ number associated with a PIN
--------------------------------------------
@@ -128,6 +202,9 @@ Getting the IRQ number associated with a PIN
Note, not all pins have an IRQ.
+ This call is now implemented by the relevant gpiolib calls, convert
+ your board or driver to use gpiolib.
+
Authour
-------
diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt
index 081892df4fd..c12bfc1a00c 100644
--- a/Documentation/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt
@@ -8,10 +8,16 @@ Introduction
The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
- S3C2412, S3C2413, S3C2440, S3C2442 and S3C2443 devices are supported.
+ S3C2412, S3C2413, S3C2416 S3C2440, S3C2442, S3C2443 and S3C2450 devices
+ are supported.
Support for the S3C2400 and S3C24A0 series are in progress.
+ The S3C2416 and S3C2450 devices are very similar and S3C2450 support is
+ included under the arch/arm/mach-s3c2416 directory. Note, whilst core
+ support for these SoCs is in, work on some of the extra peripherals
+ and extra interrupts is still ongoing.
+
Configuration
-------------
@@ -209,6 +215,13 @@ GPIO
Newer kernels carry GPIOLIB, and support is being moved towards
this with some of the older support in line to be removed.
+ As of v2.6.34, the move towards using gpiolib support is almost
+ complete, and very little of the old calls are left.
+
+ See Documentation/arm/Samsung-S3C24XX/GPIO.txt for the S3C24XX specific
+ support and Documentation/arm/Samsung/GPIO.txt for the core Samsung
+ implementation.
+
Clock Management
----------------
diff --git a/Documentation/arm/Samsung/GPIO.txt b/Documentation/arm/Samsung/GPIO.txt
new file mode 100644
index 00000000000..05850c62abe
--- /dev/null
+++ b/Documentation/arm/Samsung/GPIO.txt
@@ -0,0 +1,42 @@
+ Samsung GPIO implementation
+ ===========================
+
+Introduction
+------------
+
+This outlines the Samsung GPIO implementation and the architecture
+specfic calls provided alongisde the drivers/gpio core.
+
+
+S3C24XX (Legacy)
+----------------
+
+See Documentation/arm/Samsung-S3C24XX/GPIO.txt for more information
+about these devices. Their implementation is being brought into line
+with the core samsung implementation described in this document.
+
+
+GPIOLIB integration
+-------------------
+
+The gpio implementation uses gpiolib as much as possible, only providing
+specific calls for the items that require Samsung specific handling, such
+as pin special-function or pull resistor control.
+
+GPIO numbering is synchronised between the Samsung and gpiolib system.
+
+
+PIN configuration
+-----------------
+
+Pin configuration is specific to the Samsung architecutre, with each SoC
+registering the necessary information for the core gpio configuration
+implementation to configure pins as necessary.
+
+The s3c_gpio_cfgpin() and s3c_gpio_setpull() provide the means for a
+driver or machine to change gpio configuration.
+
+See arch/arm/plat-samsung/include/plat/gpio-cfg.h for more information
+on these functions.
+
+
diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt
new file mode 100644
index 00000000000..c3094ea51aa
--- /dev/null
+++ b/Documentation/arm/Samsung/Overview.txt
@@ -0,0 +1,99 @@
+ Samsung ARM Linux Overview
+ ==========================
+
+Introduction
+------------
+
+ The Samsung range of ARM SoCs spans many similar devices, from the initial
+ ARM9 through to the newest ARM cores. This document shows an overview of
+ the current kernel support, how to use it and where to find the code
+ that supports this.
+
+ The currently supported SoCs are:
+
+ - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
+ - S3C64XX: S3C6400 and S3C6410
+ - S5P6440
+ - S5P6442
+ - S5PC100
+ - S5PC110 / S5PV210
+
+
+S3C24XX Systems
+---------------
+
+ There is still documentation in Documnetation/arm/Samsung-S3C24XX/ which
+ deals with the architecture and drivers specific to these devices.
+
+ See Documentation/arm/Samsung-S3C24XX/Overview.txt for more information
+ on the implementation details and specific support.
+
+
+Configuration
+-------------
+
+ A number of configurations are supplied, as there is no current way of
+ unifying all the SoCs into one kernel.
+
+ s5p6440_defconfig - S5P6440 specific default configuration
+ s5p6442_defconfig - S5P6442 specific default configuration
+ s5pc100_defconfig - S5PC100 specific default configuration
+ s5pc110_defconfig - S5PC110 specific default configuration
+ s5pv210_defconfig - S5PV210 specific default configuration
+
+
+Layout
+------
+
+ The directory layout is currently being restructured, and consists of
+ several platform directories and then the machine specific directories
+ of the CPUs being built for.
+
+ plat-samsung provides the base for all the implementations, and is the
+ last in the line of include directories that are processed for the build
+ specific information. It contains the base clock, GPIO and device definitions
+ to get the system running.
+
+ plat-s3c24xx is for s3c24xx specific builds, see the S3C24XX docs.
+
+ plat-s5p is for s5p specific builds, and contains common support for the
+ S5P specific systems. Not all S5Ps use all the features in this directory
+ due to differences in the hardware.
+
+
+Layout changes
+--------------
+
+ The old plat-s3c and plat-s5pc1xx directories have been removed, with
+ support moved to either plat-samsung or plat-s5p as necessary. These moves
+ where to simplify the include and dependency issues involved with having
+ so many different platform directories.
+
+ It was decided to remove plat-s5pc1xx as some of the support was already
+ in plat-s5p or plat-samsung, with the S5PC110 support added with S5PV210
+ the only user was the S5PC100. The S5PC100 specific items where moved to
+ arch/arm/mach-s5pc100.
+
+
+
+
+Port Contributors
+-----------------
+
+ Ben Dooks (BJD)
+ Vincent Sanders
+ Herbert Potzl
+ Arnaud Patard (RTP)
+ Roc Wu
+ Klaus Fetscher
+ Dimitry Andric
+ Shannon Holland
+ Guillaume Gourat (NexVision)
+ Christer Weinigel (wingel) (Acer N30)
+ Lucas Correia Villa Real (S3C2400 port)
+
+
+Document Author
+---------------
+
+Copyright 2009-2010 Ben Dooks <ben-linux@fluff.org>
diff --git a/Documentation/arm/Samsung/clksrc-change-registers.awk b/Documentation/arm/Samsung/clksrc-change-registers.awk
new file mode 100755
index 00000000000..0c50220851f
--- /dev/null
+++ b/Documentation/arm/Samsung/clksrc-change-registers.awk
@@ -0,0 +1,167 @@
+#!/usr/bin/awk -f
+#
+# Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+#
+# Released under GPLv2
+
+# example usage
+# ./clksrc-change-registers.awk arch/arm/plat-s5pc1xx/include/plat/regs-clock.h < src > dst
+
+function extract_value(s)
+{
+ eqat = index(s, "=")
+ comat = index(s, ",")
+ return substr(s, eqat+2, (comat-eqat)-2)
+}
+
+function remove_brackets(b)
+{
+ return substr(b, 2, length(b)-2)
+}
+
+function splitdefine(l, p)
+{
+ r = split(l, tp)
+
+ p[0] = tp[2]
+ p[1] = remove_brackets(tp[3])
+}
+
+function find_length(f)
+{
+ if (0)
+ printf "find_length " f "\n" > "/dev/stderr"
+
+ if (f ~ /0x1/)
+ return 1
+ else if (f ~ /0x3/)
+ return 2
+ else if (f ~ /0x7/)
+ return 3
+ else if (f ~ /0xf/)
+ return 4
+
+ printf "unknown legnth " f "\n" > "/dev/stderr"
+ exit
+}
+
+function find_shift(s)
+{
+ id = index(s, "<")
+ if (id <= 0) {
+ printf "cannot find shift " s "\n" > "/dev/stderr"
+ exit
+ }
+
+ return substr(s, id+2)
+}
+
+
+BEGIN {
+ if (ARGC < 2) {
+ print "too few arguments" > "/dev/stderr"
+ exit
+ }
+
+# read the header file and find the mask values that we will need
+# to replace and create an associative array of values
+
+ while (getline line < ARGV[1] > 0) {
+ if (line ~ /\#define.*_MASK/ &&
+ !(line ~ /S5PC100_EPLL_MASK/) &&
+ !(line ~ /USB_SIG_MASK/)) {
+ splitdefine(line, fields)
+ name = fields[0]
+ if (0)
+ printf "MASK " line "\n" > "/dev/stderr"
+ dmask[name,0] = find_length(fields[1])
+ dmask[name,1] = find_shift(fields[1])
+ if (0)
+ printf "=> '" name "' LENGTH=" dmask[name,0] " SHIFT=" dmask[name,1] "\n" > "/dev/stderr"
+ } else {
+ }
+ }
+
+ delete ARGV[1]
+}
+
+/clksrc_clk.*=.*{/ {
+ shift=""
+ mask=""
+ divshift=""
+ reg_div=""
+ reg_src=""
+ indent=1
+
+ print $0
+
+ for(; indent >= 1;) {
+ if ((getline line) <= 0) {
+ printf "unexpected end of file" > "/dev/stderr"
+ exit 1;
+ }
+
+ if (line ~ /\.shift/) {
+ shift = extract_value(line)
+ } else if (line ~ /\.mask/) {
+ mask = extract_value(line)
+ } else if (line ~ /\.reg_divider/) {
+ reg_div = extract_value(line)
+ } else if (line ~ /\.reg_source/) {
+ reg_src = extract_value(line)
+ } else if (line ~ /\.divider_shift/) {
+ divshift = extract_value(line)
+ } else if (line ~ /{/) {
+ indent++
+ print line
+ } else if (line ~ /}/) {
+ indent--
+
+ if (indent == 0) {
+ if (0) {
+ printf "shift '" shift "' ='" dmask[shift,0] "'\n" > "/dev/stderr"
+ printf "mask '" mask "'\n" > "/dev/stderr"
+ printf "dshft '" divshift "'\n" > "/dev/stderr"
+ printf "rdiv '" reg_div "'\n" > "/dev/stderr"
+ printf "rsrc '" reg_src "'\n" > "/dev/stderr"
+ }
+
+ generated = mask
+ sub(reg_src, reg_div, generated)
+
+ if (0) {
+ printf "/* rsrc " reg_src " */\n"
+ printf "/* rdiv " reg_div " */\n"
+ printf "/* shift " shift " */\n"
+ printf "/* mask " mask " */\n"
+ printf "/* generated " generated " */\n"
+ }
+
+ if (reg_div != "") {
+ printf "\t.reg_div = { "
+ printf ".reg = " reg_div ", "
+ printf ".shift = " dmask[generated,1] ", "
+ printf ".size = " dmask[generated,0] ", "
+ printf "},\n"
+ }
+
+ printf "\t.reg_src = { "
+ printf ".reg = " reg_src ", "
+ printf ".shift = " dmask[mask,1] ", "
+ printf ".size = " dmask[mask,0] ", "
+
+ printf "},\n"
+
+ }
+
+ print line
+ } else {
+ print line
+ }
+
+ if (0)
+ printf indent ":" line "\n" > "/dev/stderr"
+ }
+}
+
+// && ! /clksrc_clk.*=.*{/ { print $0 }
diff --git a/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen b/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen
index 1e6a23fdf2f..dc460f05564 100644
--- a/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen
+++ b/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen
@@ -7,7 +7,7 @@ The driver only implements a four-wire touch panel protocol.
The touchscreen driver is maintenance free except for the pen-down or
touch threshold. Some resistive displays and board combinations may
-require tuning of this threshold. The driver exposes some of it's
+require tuning of this threshold. The driver exposes some of its
internal state in the sys filesystem. If the kernel is configured
with it, CONFIG_SYSFS, and sysfs is mounted at /sys, there will be a
directory
diff --git a/Documentation/arm/memory.txt b/Documentation/arm/memory.txt
index 9d58c7c5edd..771d48d3b33 100644
--- a/Documentation/arm/memory.txt
+++ b/Documentation/arm/memory.txt
@@ -33,7 +33,13 @@ ffff0000 ffff0fff CPU vector page.
fffe0000 fffeffff XScale cache flush area. This is used
in proc-xscale.S to flush the whole data
- cache. Free for other usage on non-XScale.
+ cache. (XScale does not have TCM.)
+
+fffe8000 fffeffff DTCM mapping area for platforms with
+ DTCM mounted inside the CPU.
+
+fffe0000 fffe7fff ITCM mapping area for platforms with
+ ITCM mounted inside the CPU.
fff00000 fffdffff Fixmap mapping region. Addresses provided
by fix_to_virt() will be located here.
@@ -59,7 +65,11 @@ PAGE_OFFSET high_memory-1 Kernel direct-mapped RAM region.
This maps the platforms RAM, and typically
maps all platform RAM in a 1:1 relationship.
-TASK_SIZE PAGE_OFFSET-1 Kernel module space
+PKMAP_BASE PAGE_OFFSET-1 Permanent kernel mappings
+ One way of mapping HIGHMEM pages into kernel
+ space.
+
+MODULES_VADDR MODULES_END-1 Kernel module space
Kernel modules inserted via insmod are
placed here using dynamic mappings.
diff --git a/Documentation/arm/tcm.txt b/Documentation/arm/tcm.txt
index 77fd9376e6d..7c15871c188 100644
--- a/Documentation/arm/tcm.txt
+++ b/Documentation/arm/tcm.txt
@@ -19,8 +19,8 @@ defines a CPUID_TCM register that you can read out from the
system control coprocessor. Documentation from ARM can be found
at http://infocenter.arm.com, search for "TCM Status Register"
to see documents for all CPUs. Reading this register you can
-determine if ITCM (bit 0) and/or DTCM (bit 16) is present in the
-machine.
+determine if ITCM (bits 1-0) and/or DTCM (bit 17-16) is present
+in the machine.
There is further a TCM region register (search for "TCM Region
Registers" at the ARM site) that can report and modify the location
@@ -35,7 +35,15 @@ The TCM memory can then be remapped to another address again using
the MMU, but notice that the TCM if often used in situations where
the MMU is turned off. To avoid confusion the current Linux
implementation will map the TCM 1 to 1 from physical to virtual
-memory in the location specified by the machine.
+memory in the location specified by the kernel. Currently Linux
+will map ITCM to 0xfffe0000 and on, and DTCM to 0xfffe8000 and
+on, supporting a maximum of 32KiB of ITCM and 32KiB of DTCM.
+
+Newer versions of the region registers also support dividing these
+TCMs in two separate banks, so for example an 8KiB ITCM is divided
+into two 4KiB banks with its own control registers. The idea is to
+be able to lock and hide one of the banks for use by the secure
+world (TrustZone).
TCM is used for a few things:
@@ -65,18 +73,18 @@ in <asm/tcm.h>. Using this interface it is possible to:
memory. Such a heap is great for things like saving
device state when shutting off device power domains.
-A machine that has TCM memory shall select HAVE_TCM in
-arch/arm/Kconfig for itself, and then the
-rest of the functionality will depend on the physical
-location and size of ITCM and DTCM to be defined in
-mach/memory.h for the machine. Code that needs to use
-TCM shall #include <asm/tcm.h> If the TCM is not located
-at the place given in memory.h it will be moved using
-the TCM Region registers.
+A machine that has TCM memory shall select HAVE_TCM from
+arch/arm/Kconfig for itself. Code that needs to use TCM shall
+#include <asm/tcm.h>
Functions to go into itcm can be tagged like this:
int __tcmfunc foo(int bar);
+Since these are marked to become long_calls and you may want
+to have functions called locally inside the TCM without
+wasting space, there is also the __tcmlocalfunc prefix that
+will make the call relative.
+
Variables to go into dtcm can be tagged like this:
int __tcmdata foo;
diff --git a/Documentation/atomic_ops.txt b/Documentation/atomic_ops.txt
index 396bec3b74e..ac4d4718712 100644
--- a/Documentation/atomic_ops.txt
+++ b/Documentation/atomic_ops.txt
@@ -320,7 +320,7 @@ counter decrement would not become globally visible until the
obj->active update does.
As a historical note, 32-bit Sparc used to only allow usage of
-24-bits of it's atomic_t type. This was because it used 8 bits
+24-bits of its atomic_t type. This was because it used 8 bits
as a spinlock for SMP safety. Sparc32 lacked a "compare and swap"
type instruction. However, 32-bit Sparc has since been moved over
to a "hash table of spinlocks" scheme, that allows the full 32-bit
diff --git a/Documentation/binfmt_misc.txt b/Documentation/binfmt_misc.txt
index f609ebf9c78..c1ed6948ba8 100644
--- a/Documentation/binfmt_misc.txt
+++ b/Documentation/binfmt_misc.txt
@@ -111,6 +111,6 @@ cause unexpected behaviour and can be a security hazard.
There is a web page about binfmt_misc at
-http://www.tat.physik.uni-tuebingen.de/~rguenth/linux/binfmt_misc.html
+http://www.tat.physik.uni-tuebingen.de
Richard Günther <rguenth@tat.physik.uni-tuebingen.de>
diff --git a/Documentation/blackfin/00-INDEX b/Documentation/blackfin/00-INDEX
index c34e12440fe..2df0365f2df 100644
--- a/Documentation/blackfin/00-INDEX
+++ b/Documentation/blackfin/00-INDEX
@@ -1,11 +1,8 @@
00-INDEX
- This file
-cachefeatures.txt
- - Supported cache features.
-
-Filesystems
- - Requirements for mounting the root file system.
-
-bfin-gpio-note.txt
+bfin-gpio-notes.txt
- Notes in developing/using bfin-gpio driver.
+
+bfin-spi-notes.txt
+ - Notes for using bfin spi bus driver.
diff --git a/Documentation/blackfin/Filesystems b/Documentation/blackfin/Filesystems
deleted file mode 100644
index 51260a1b803..00000000000
--- a/Documentation/blackfin/Filesystems
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * File: Documentation/blackfin/Filesystems
- * Based on:
- * Author:
- *
- * Created:
- * Description: This file contains the simple DMA Implementation for Blackfin
- *
- * Rev: $Id: Filesystems 2384 2006-11-01 04:12:43Z magicyang $
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- */
-
- How to mount the root file system in uClinux/Blackfin
- -----------------------------------------------------
-
-1 Mounting EXT3 File system.
- ------------------------
-
- Creating an EXT3 File system for uClinux/Blackfin:
-
-
-Please follow the steps to form the EXT3 File system and mount the same as root
-file system.
-
-a Make an ext3 file system as large as you want the final root file
- system.
-
- mkfs.ext3 /dev/ram0 <your-rootfs-size-in-1k-blocks>
-
-b Mount this Empty file system on a free directory as:
-
- mount -t ext3 /dev/ram0 ./test
- where ./test is the empty directory.
-
-c Copy your root fs directory that you have so carefully made over.
-
- cp -af /tmp/my_final_rootfs_files/* ./test
-
- (For ex: cp -af uClinux-dist/romfs/* ./test)
-
-d If you have done everything right till now you should be able to see
- the required "root" dir's (that's etc, root, bin, lib, sbin...)
-
-e Now unmount the file system
-
- umount ./test
-
-f Create the root file system image.
-
- dd if=/dev/ram0 bs=1k count=<your-rootfs-size-in-1k-blocks> \
- > ext3fs.img
-
-
-Now you have to tell the kernel that will be mounting this file system as
-rootfs.
-So do a make menuconfig under kernel and select the Ext3 journaling file system
-support under File system --> submenu.
-
-
-2. Mounting EXT2 File system.
- -------------------------
-
-By default the ext2 file system image will be created if you invoke make from
-the top uClinux-dist directory.
-
-
-3. Mounting CRAMFS File System
- ----------------------------
-
-To create a CRAMFS file system image execute the command
-
- mkfs.cramfs ./test cramfs.img
-
- where ./test is the target directory.
-
-
-4. Mounting ROMFS File System
- --------------------------
-
-To create a ROMFS file system image execute the command
-
- genromfs -v -V "ROMdisk" -f romfs.img -d ./test
-
- where ./test is the target directory
-
-
-5. Mounting the JFFS2 Filesystem
- -----------------------------
-
-To create a compressed JFFS filesystem (JFFS2), please execute the command
-
- mkfs.jffs2 -d ./test -o jffs2.img
-
- where ./test is the target directory.
-
-However, please make sure the following is in your kernel config.
-
-/*
- * RAM/ROM/Flash chip drivers
- */
-#define CONFIG_MTD_CFI 1
-#define CONFIG_MTD_ROM 1
-/*
- * Mapping drivers for chip access
- */
-#define CONFIG_MTD_COMPLEX_MAPPINGS 1
-#define CONFIG_MTD_BF533 1
-#undef CONFIG_MTD_UCLINUX
-
-Through the u-boot boot loader, use the jffs2.img in the corresponding
-partition made in linux-2.6.x/drivers/mtd/maps/bf533_flash.c.
-
-NOTE - Currently the Flash driver is available only for EZKIT. Watch out for a
- STAMP driver soon.
-
-
-6. Mounting the NFS File system
- -----------------------------
-
- For mounting the NFS please do the following in the kernel config.
-
- In Networking Support --> Networking options --> TCP/IP networking -->
- IP: kernel level autoconfiguration
-
- Enable BOOTP Support.
-
- In Kernel hacking --> Compiled-in kernel boot parameter add the following
-
- root=/dev/nfs rw ip=bootp
-
- In File system --> Network File system, Enable
-
- NFS file system support --> NFSv3 client support
- Root File system on NFS
-
- in uClibc menuconfig, do the following
- In Networking Support
- enable Remote Procedure Call (RPC) support
- Full RPC Support
-
- On the Host side, ensure that /etc/dhcpd.conf looks something like this
-
- ddns-update-style ad-hoc;
- allow bootp;
- subnet 10.100.4.0 netmask 255.255.255.0 {
- default-lease-time 122209600;
- max-lease-time 31557600;
- group {
- host bf533 {
- hardware ethernet 00:CF:52:49:C3:01;
- fixed-address 10.100.4.50;
- option root-path "/home/nfsmount";
- }
- }
-
- ensure that /etc/exports looks something like this
- /home/nfsmount *(rw,no_root_squash,no_all_squash)
-
- run the following commands as root (may differ depending on your
- distribution) :
- - service nfs start
- - service portmap start
- - service dhcpd start
- - /usr/sbin/exportfs
diff --git a/Documentation/blackfin/bfin-gpio-notes.txt b/Documentation/blackfin/bfin-gpio-notes.txt
index 9898c7ded7d..f731c1e5647 100644
--- a/Documentation/blackfin/bfin-gpio-notes.txt
+++ b/Documentation/blackfin/bfin-gpio-notes.txt
@@ -43,7 +43,7 @@
void bfin_gpio_irq_free(unsigned gpio);
The request functions will record the function state for a certain pin,
- the free functions will clear it's function state.
+ the free functions will clear its function state.
Once a pin is requested, it can't be requested again before it is freed by
previous caller, otherwise kernel will dump stacks, and the request
function fail.
diff --git a/Documentation/blackfin/bfin-spi-notes.txt b/Documentation/blackfin/bfin-spi-notes.txt
new file mode 100644
index 00000000000..556fa877f2e
--- /dev/null
+++ b/Documentation/blackfin/bfin-spi-notes.txt
@@ -0,0 +1,14 @@
+SPI Chip Select behavior:
+
+With the Blackfin on-chip SPI peripheral, there is some logic tied to the CPHA
+bit whether the Slave Select Line is controlled by hardware (CPHA=0) or
+controlled by software (CPHA=1). However, the Linux SPI bus driver assumes that
+the Slave Select is always under software control and being asserted during
+the entire SPI transfer. - And not just bits_per_word duration.
+
+In most cases you can utilize SPI MODE_3 instead of MODE_0 to work-around this
+behavior. If your SPI slave device in question requires SPI MODE_0 or MODE_2
+timing, you can utilize the GPIO controlled SPI Slave Select option instead.
+
+You can even use the same pin whose peripheral role is a SSEL,
+but use it as a GPIO instead.
diff --git a/Documentation/blackfin/cachefeatures.txt b/Documentation/blackfin/cachefeatures.txt
deleted file mode 100644
index 75de51f9451..00000000000
--- a/Documentation/blackfin/cachefeatures.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * File: Documentation/blackfin/cachefeatures.txt
- * Based on:
- * Author:
- *
- * Created:
- * Description: This file contains the simple DMA Implementation for Blackfin
- *
- * Rev: $Id: cachefeatures.txt 2384 2006-11-01 04:12:43Z magicyang $
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- */
-
- - Instruction and Data cache initialization.
- icache_init();
- dcache_init();
-
- - Instruction and Data cache Invalidation Routines, when flushing the
- same is not required.
- _icache_invalidate();
- _dcache_invalidate();
-
- Also, for invalidating the entire instruction and data cache, the below
- routines are provided (another method for invalidation, refer page no 267 and 287 of
- ADSP-BF533 Hardware Reference manual)
-
- invalidate_entire_dcache();
- invalidate_entire_icache();
-
- -External Flushing of Instruction and data cache routines.
-
- flush_instruction_cache();
- flush_data_cache();
-
- - Internal Flushing of Instruction and Data Cache.
-
- icplb_flush();
- dcplb_flush();
-
- - Miscellaneous cache functions.
-
- flush_cache_all();
- flush_cache_mm();
- invalidate_dcache_range();
- flush_dcache_range();
- flush_dcache_page();
- flush_cache_range();
- flush_cache_page();
- invalidate_dcache_range();
- flush_page_to_ram();
-
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index 6fab97ea7e6..b9a83dd2473 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -7,7 +7,7 @@ Notes Written on Jan 15, 2002:
Last Updated May 2, 2002
September 2003: Updated I/O Scheduler portions
- Nick Piggin <piggin@cyberone.com.au>
+ Nick Piggin <npiggin@kernel.dk>
Introduction:
@@ -1162,8 +1162,8 @@ where a driver received a request ala this before:
As mentioned, there is no virtual mapping of a bio. For DMA, this is
not a problem as the driver probably never will need a virtual mapping.
-Instead it needs a bus mapping (pci_map_page for a single segment or
-use blk_rq_map_sg for scatter gather) to be able to ship it to the driver. For
+Instead it needs a bus mapping (dma_map_page for a single segment or
+use dma_map_sg for scatter gather) to be able to ship it to the driver. For
PIO drivers (or drivers that need to revert to PIO transfer once in a
while (IDE for example)), where the CPU is doing the actual data
transfer a virtual mapping is needed. If the driver supports highmem I/O,
diff --git a/Documentation/block/cfq-iosched.txt b/Documentation/block/cfq-iosched.txt
new file mode 100644
index 00000000000..e578feed6d8
--- /dev/null
+++ b/Documentation/block/cfq-iosched.txt
@@ -0,0 +1,45 @@
+CFQ ioscheduler tunables
+========================
+
+slice_idle
+----------
+This specifies how long CFQ should idle for next request on certain cfq queues
+(for sequential workloads) and service trees (for random workloads) before
+queue is expired and CFQ selects next queue to dispatch from.
+
+By default slice_idle is a non-zero value. That means by default we idle on
+queues/service trees. This can be very helpful on highly seeky media like
+single spindle SATA/SAS disks where we can cut down on overall number of
+seeks and see improved throughput.
+
+Setting slice_idle to 0 will remove all the idling on queues/service tree
+level and one should see an overall improved throughput on faster storage
+devices like multiple SATA/SAS disks in hardware RAID configuration. The down
+side is that isolation provided from WRITES also goes down and notion of
+IO priority becomes weaker.
+
+So depending on storage and workload, it might be useful to set slice_idle=0.
+In general I think for SATA/SAS disks and software RAID of SATA/SAS disks
+keeping slice_idle enabled should be useful. For any configurations where
+there are multiple spindles behind single LUN (Host based hardware RAID
+controller or for storage arrays), setting slice_idle=0 might end up in better
+throughput and acceptable latencies.
+
+CFQ IOPS Mode for group scheduling
+===================================
+Basic CFQ design is to provide priority based time slices. Higher priority
+process gets bigger time slice and lower priority process gets smaller time
+slice. Measuring time becomes harder if storage is fast and supports NCQ and
+it would be better to dispatch multiple requests from multiple cfq queues in
+request queue at a time. In such scenario, it is not possible to measure time
+consumed by single queue accurately.
+
+What is possible though is to measure number of requests dispatched from a
+single queue and also allow dispatch from multiple cfq queue at the same time.
+This effectively becomes the fairness in terms of IOPS (IO operations per
+second).
+
+If one sets slice_idle=0 and if storage supports NCQ, CFQ internally switches
+to IOPS mode and starts providing fairness in terms of number of requests
+dispatched. Note that this mode switching takes effect only for group
+scheduling. For non-cgroup users nothing should change.
diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt
index e164403f60e..f65274081c8 100644
--- a/Documentation/block/queue-sysfs.txt
+++ b/Documentation/block/queue-sysfs.txt
@@ -25,11 +25,11 @@ size allowed by the hardware.
nomerges (RW)
-------------
-This enables the user to disable the lookup logic involved with IO merging
-requests in the block layer. Merging may still occur through a direct
-1-hit cache, since that comes for (almost) free. The IO scheduler will not
-waste cycles doing tree/hash lookups for merges if nomerges is 1. Defaults
-to 0, enabling all merges.
+This enables the user to disable the lookup logic involved with IO
+merging requests in the block layer. By default (0) all merges are
+enabled. When set to 1 only simple one-hit merges will be tried. When
+set to 2 no merge algorithms will be tried (including one-hit or more
+complex tree/hash lookups).
nr_requests (RW)
----------------
diff --git a/Documentation/blockdev/paride.txt b/Documentation/blockdev/paride.txt
index e4312676bdd..ee6717e3771 100644
--- a/Documentation/blockdev/paride.txt
+++ b/Documentation/blockdev/paride.txt
@@ -412,6 +412,6 @@ have in your mail headers, when sending mail to the list server.
You might also find some useful information on the linux-parport
web pages (although they are not always up to date) at
- http://www.torque.net/parport/
+ http://web.archive.org/web/*/http://www.torque.net/parport/
diff --git a/Documentation/IO-mapping.txt b/Documentation/bus-virt-phys-mapping.txt
index 1b5aa10df84..1b5aa10df84 100644
--- a/Documentation/IO-mapping.txt
+++ b/Documentation/bus-virt-phys-mapping.txt
diff --git a/Documentation/cachetlb.txt b/Documentation/cachetlb.txt
index da42ab414c4..9164ae3b83b 100644
--- a/Documentation/cachetlb.txt
+++ b/Documentation/cachetlb.txt
@@ -5,7 +5,7 @@
This document describes the cache/tlb flushing interfaces called
by the Linux VM subsystem. It enumerates over each interface,
-describes it's intended purpose, and what side effect is expected
+describes its intended purpose, and what side effect is expected
after the interface is invoked.
The side effects described below are stated for a uniprocessor
@@ -88,12 +88,12 @@ changes occur:
This is used primarily during fault processing.
5) void update_mmu_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte)
+ unsigned long address, pte_t *ptep)
At the end of every page fault, this routine is invoked to
tell the architecture specific code that a translation
- described by "pte" now exists at virtual address "address"
- for address space "vma->vm_mm", in the software page tables.
+ now exists at virtual address "address" for address space
+ "vma->vm_mm", in the software page tables.
A port may use this information in any way it so chooses.
For example, it could use this event to pre-load TLB
@@ -231,7 +231,7 @@ require a whole different set of interfaces to handle properly.
The biggest problem is that of virtual aliasing in the data cache
of a processor.
-Is your port susceptible to virtual aliasing in it's D-cache?
+Is your port susceptible to virtual aliasing in its D-cache?
Well, if your D-cache is virtually indexed, is larger in size than
PAGE_SIZE, and does not prevent multiple cache lines for the same
physical address from existing at once, you have this problem.
@@ -249,7 +249,7 @@ one way to solve this (in particular SPARC_FLAG_MMAPSHARED).
Next, you have to solve the D-cache aliasing issue for all
other cases. Please keep in mind that fact that, for a given page
mapped into some user address space, there is always at least one more
-mapping, that of the kernel in it's linear mapping starting at
+mapping, that of the kernel in its linear mapping starting at
PAGE_OFFSET. So immediately, once the first user maps a given
physical page into its address space, by implication the D-cache
aliasing problem has the potential to exist since the kernel already
@@ -377,3 +377,27 @@ maps this page at its virtual address.
All the functionality of flush_icache_page can be implemented in
flush_dcache_page and update_mmu_cache. In 2.7 the hope is to
remove this interface completely.
+
+The final category of APIs is for I/O to deliberately aliased address
+ranges inside the kernel. Such aliases are set up by use of the
+vmap/vmalloc API. Since kernel I/O goes via physical pages, the I/O
+subsystem assumes that the user mapping and kernel offset mapping are
+the only aliases. This isn't true for vmap aliases, so anything in
+the kernel trying to do I/O to vmap areas must manually manage
+coherency. It must do this by flushing the vmap range before doing
+I/O and invalidating it after the I/O returns.
+
+ void flush_kernel_vmap_range(void *vaddr, int size)
+ flushes the kernel cache for a given virtual address range in
+ the vmap area. This is to make sure that any data the kernel
+ modified in the vmap range is made visible to the physical
+ page. The design is to make this area safe to perform I/O on.
+ Note that this API does *not* also flush the offset map alias
+ of the area.
+
+ void invalidate_kernel_vmap_range(void *vaddr, int size) invalidates
+ the cache for a given virtual address range in the vmap area
+ which prevents the processor from making the cache stale by
+ speculatively reading data while the I/O was occurring to the
+ physical pages. This is only necessary for data reads into the
+ vmap area.
diff --git a/Documentation/cdrom/ide-cd b/Documentation/cdrom/ide-cd
index 2c558cd6c1e..f4dc9de2694 100644
--- a/Documentation/cdrom/ide-cd
+++ b/Documentation/cdrom/ide-cd
@@ -159,42 +159,7 @@ two arguments: the CDROM device, and the slot number to which you wish
to change. If the slot number is -1, the drive is unloaded.
-4. Compilation options
-----------------------
-
-There are a few additional options which can be set when compiling the
-driver. Most people should not need to mess with any of these; they
-are listed here simply for completeness. A compilation option can be
-enabled by adding a line of the form `#define <option> 1' to the top
-of ide-cd.c. All these options are disabled by default.
-
-VERBOSE_IDE_CD_ERRORS
- If this is set, ATAPI error codes will be translated into textual
- descriptions. In addition, a dump is made of the command which
- provoked the error. This is off by default to save the memory used
- by the (somewhat long) table of error descriptions.
-
-STANDARD_ATAPI
- If this is set, the code needed to deal with certain drives which do
- not properly implement the ATAPI spec will be disabled. If you know
- your drive implements ATAPI properly, you can turn this on to get a
- slightly smaller kernel.
-
-NO_DOOR_LOCKING
- If this is set, the driver will never attempt to lock the door of
- the drive.
-
-CDROM_NBLOCKS_BUFFER
- This sets the size of the buffer to be used for a CDROMREADAUDIO
- ioctl. The default is 8.
-
-TEST
- This currently enables an additional ioctl which enables a user-mode
- program to execute an arbitrary packet command. See the source for
- details. This should be left off unless you know what you're doing.
-
-
-5. Common problems
+4. Common problems
------------------
This section discusses some common problems encountered when trying to
@@ -371,7 +336,7 @@ f. Data corruption.
expense of low system performance.
-6. cdchange.c
+5. cdchange.c
-------------
/*
diff --git a/Documentation/cdrom/packet-writing.txt b/Documentation/cdrom/packet-writing.txt
index 1c407778c8b..13c251d5add 100644
--- a/Documentation/cdrom/packet-writing.txt
+++ b/Documentation/cdrom/packet-writing.txt
@@ -95,7 +95,7 @@ Using the pktcdvd sysfs interface
Since Linux 2.6.20, the pktcdvd module has a sysfs interface
and can be controlled by it. For example the "pktcdvd" tool uses
-this interface. (see http://people.freenet.de/BalaGi#pktcdvd )
+this interface. (see http://tom.ist-im-web.de/download/pktcdvd )
"pktcdvd" works similar to "pktsetup", e.g.:
diff --git a/Documentation/cgroups/blkio-controller.txt b/Documentation/cgroups/blkio-controller.txt
index 630879cd9a4..6919d62591d 100644
--- a/Documentation/cgroups/blkio-controller.txt
+++ b/Documentation/cgroups/blkio-controller.txt
@@ -17,6 +17,9 @@ HOWTO
You can do a very simple testing of running two dd threads in two different
cgroups. Here is what you can do.
+- Enable Block IO controller
+ CONFIG_BLK_CGROUP=y
+
- Enable group scheduling in CFQ
CONFIG_CFQ_GROUP_IOSCHED=y
@@ -54,31 +57,51 @@ cgroups. Here is what you can do.
Various user visible config options
===================================
+CONFIG_BLK_CGROUP
+ - Block IO controller.
+
+CONFIG_DEBUG_BLK_CGROUP
+ - Debug help. Right now some additional stats file show up in cgroup
+ if this option is enabled.
+
CONFIG_CFQ_GROUP_IOSCHED
- Enables group scheduling in CFQ. Currently only 1 level of group
creation is allowed.
-CONFIG_DEBUG_CFQ_IOSCHED
- - Enables some debugging messages in blktrace. Also creates extra
- cgroup file blkio.dequeue.
+Details of cgroup files
+=======================
+- blkio.weight
+ - Specifies per cgroup weight. This is default weight of the group
+ on all the devices until and unless overridden by per device rule.
+ (See blkio.weight_device).
+ Currently allowed range of weights is from 100 to 1000.
-Config options selected automatically
-=====================================
-These config options are not user visible and are selected/deselected
-automatically based on IO scheduler configuration.
+- blkio.weight_device
+ - One can specify per cgroup per device rules using this interface.
+ These rules override the default value of group weight as specified
+ by blkio.weight.
-CONFIG_BLK_CGROUP
- - Block IO controller. Selected by CONFIG_CFQ_GROUP_IOSCHED.
+ Following is the format.
-CONFIG_DEBUG_BLK_CGROUP
- - Debug help. Selected by CONFIG_DEBUG_CFQ_IOSCHED.
+ #echo dev_maj:dev_minor weight > /path/to/cgroup/blkio.weight_device
+ Configure weight=300 on /dev/sdb (8:16) in this cgroup
+ # echo 8:16 300 > blkio.weight_device
+ # cat blkio.weight_device
+ dev weight
+ 8:16 300
-Details of cgroup files
-=======================
-- blkio.weight
- - Specifies per cgroup weight.
+ Configure weight=500 on /dev/sda (8:0) in this cgroup
+ # echo 8:0 500 > blkio.weight_device
+ # cat blkio.weight_device
+ dev weight
+ 8:0 500
+ 8:16 300
- Currently allowed range of weights is from 100 to 1000.
+ Remove specific weight for /dev/sda in this cgroup
+ # echo 8:0 0 > blkio.weight_device
+ # cat blkio.weight_device
+ dev weight
+ 8:16 300
- blkio.time
- disk time allocated to cgroup per device in milliseconds. First
@@ -92,16 +115,109 @@ Details of cgroup files
third field specifies the number of sectors transferred by the
group to/from the device.
+- blkio.io_service_bytes
+ - Number of bytes transferred to/from the disk by the group. These
+ are further divided by the type of operation - read or write, sync
+ or async. First two fields specify the major and minor number of the
+ device, third field specifies the operation type and the fourth field
+ specifies the number of bytes.
+
+- blkio.io_serviced
+ - Number of IOs completed to/from the disk by the group. These
+ are further divided by the type of operation - read or write, sync
+ or async. First two fields specify the major and minor number of the
+ device, third field specifies the operation type and the fourth field
+ specifies the number of IOs.
+
+- blkio.io_service_time
+ - Total amount of time between request dispatch and request completion
+ for the IOs done by this cgroup. This is in nanoseconds to make it
+ meaningful for flash devices too. For devices with queue depth of 1,
+ this time represents the actual service time. When queue_depth > 1,
+ that is no longer true as requests may be served out of order. This
+ may cause the service time for a given IO to include the service time
+ of multiple IOs when served out of order which may result in total
+ io_service_time > actual time elapsed. This time is further divided by
+ the type of operation - read or write, sync or async. First two fields
+ specify the major and minor number of the device, third field
+ specifies the operation type and the fourth field specifies the
+ io_service_time in ns.
+
+- blkio.io_wait_time
+ - Total amount of time the IOs for this cgroup spent waiting in the
+ scheduler queues for service. This can be greater than the total time
+ elapsed since it is cumulative io_wait_time for all IOs. It is not a
+ measure of total time the cgroup spent waiting but rather a measure of
+ the wait_time for its individual IOs. For devices with queue_depth > 1
+ this metric does not include the time spent waiting for service once
+ the IO is dispatched to the device but till it actually gets serviced
+ (there might be a time lag here due to re-ordering of requests by the
+ device). This is in nanoseconds to make it meaningful for flash
+ devices too. This time is further divided by the type of operation -
+ read or write, sync or async. First two fields specify the major and
+ minor number of the device, third field specifies the operation type
+ and the fourth field specifies the io_wait_time in ns.
+
+- blkio.io_merged
+ - Total number of bios/requests merged into requests belonging to this
+ cgroup. This is further divided by the type of operation - read or
+ write, sync or async.
+
+- blkio.io_queued
+ - Total number of requests queued up at any given instant for this
+ cgroup. This is further divided by the type of operation - read or
+ write, sync or async.
+
+- blkio.avg_queue_size
+ - Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y.
+ The average queue size for this cgroup over the entire time of this
+ cgroup's existence. Queue size samples are taken each time one of the
+ queues of this cgroup gets a timeslice.
+
+- blkio.group_wait_time
+ - Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y.
+ This is the amount of time the cgroup had to wait since it became busy
+ (i.e., went from 0 to 1 request queued) to get a timeslice for one of
+ its queues. This is different from the io_wait_time which is the
+ cumulative total of the amount of time spent by each IO in that cgroup
+ waiting in the scheduler queue. This is in nanoseconds. If this is
+ read when the cgroup is in a waiting (for timeslice) state, the stat
+ will only report the group_wait_time accumulated till the last time it
+ got a timeslice and will not include the current delta.
+
+- blkio.empty_time
+ - Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y.
+ This is the amount of time a cgroup spends without any pending
+ requests when not being served, i.e., it does not include any time
+ spent idling for one of the queues of the cgroup. This is in
+ nanoseconds. If this is read when the cgroup is in an empty state,
+ the stat will only report the empty_time accumulated till the last
+ time it had a pending request and will not include the current delta.
+
+- blkio.idle_time
+ - Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y.
+ This is the amount of time spent by the IO scheduler idling for a
+ given cgroup in anticipation of a better request than the exising ones
+ from other queues/cgroups. This is in nanoseconds. If this is read
+ when the cgroup is in an idling state, the stat will only report the
+ idle_time accumulated till the last idle period and will not include
+ the current delta.
+
- blkio.dequeue
- - Debugging aid only enabled if CONFIG_DEBUG_CFQ_IOSCHED=y. This
+ - Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y. This
gives the statistics about how many a times a group was dequeued
from service tree of the device. First two fields specify the major
and minor number of the device and third field specifies the number
of times a group was dequeued from a particular device.
+- blkio.reset_stats
+ - Writing an int to this file will result in resetting all the stats
+ for that cgroup.
+
CFQ sysfs tunable
=================
/sys/block/<disk>/queue/iosched/group_isolation
+-----------------------------------------------
If group_isolation=1, it provides stronger isolation between groups at the
expense of throughput. By default group_isolation is 0. In general that
@@ -128,6 +244,33 @@ By default one should run with group_isolation=0. If that is not sufficient
and one wants stronger isolation between groups, then set group_isolation=1
but this will come at cost of reduced throughput.
+/sys/block/<disk>/queue/iosched/slice_idle
+------------------------------------------
+On a faster hardware CFQ can be slow, especially with sequential workload.
+This happens because CFQ idles on a single queue and single queue might not
+drive deeper request queue depths to keep the storage busy. In such scenarios
+one can try setting slice_idle=0 and that would switch CFQ to IOPS
+(IO operations per second) mode on NCQ supporting hardware.
+
+That means CFQ will not idle between cfq queues of a cfq group and hence be
+able to driver higher queue depth and achieve better throughput. That also
+means that cfq provides fairness among groups in terms of IOPS and not in
+terms of disk time.
+
+/sys/block/<disk>/queue/iosched/group_idle
+------------------------------------------
+If one disables idling on individual cfq queues and cfq service trees by
+setting slice_idle=0, group_idle kicks in. That means CFQ will still idle
+on the group in an attempt to provide fairness among groups.
+
+By default group_idle is same as slice_idle and does not do anything if
+slice_idle is enabled.
+
+One can experience an overall throughput drop if you have created multiple
+groups and put applications in that group which are not driving enough
+IO to keep disk busy. In that case set group_idle=0, and CFQ will not idle
+on individual groups and throughput should improve.
+
What works
==========
- Currently only sync IO queues are support. All the buffered writes are
diff --git a/Documentation/cgroups/cgroup_event_listener.c b/Documentation/cgroups/cgroup_event_listener.c
new file mode 100644
index 00000000000..8c2bfc4a635
--- /dev/null
+++ b/Documentation/cgroups/cgroup_event_listener.c
@@ -0,0 +1,110 @@
+/*
+ * cgroup_event_listener.c - Simple listener of cgroup events
+ *
+ * Copyright (C) Kirill A. Shutemov <kirill@shutemov.name>
+ */
+
+#include <assert.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <libgen.h>
+#include <limits.h>
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+
+#include <sys/eventfd.h>
+
+#define USAGE_STR "Usage: cgroup_event_listener <path-to-control-file> <args>\n"
+
+int main(int argc, char **argv)
+{
+ int efd = -1;
+ int cfd = -1;
+ int event_control = -1;
+ char event_control_path[PATH_MAX];
+ char line[LINE_MAX];
+ int ret;
+
+ if (argc != 3) {
+ fputs(USAGE_STR, stderr);
+ return 1;
+ }
+
+ cfd = open(argv[1], O_RDONLY);
+ if (cfd == -1) {
+ fprintf(stderr, "Cannot open %s: %s\n", argv[1],
+ strerror(errno));
+ goto out;
+ }
+
+ ret = snprintf(event_control_path, PATH_MAX, "%s/cgroup.event_control",
+ dirname(argv[1]));
+ if (ret >= PATH_MAX) {
+ fputs("Path to cgroup.event_control is too long\n", stderr);
+ goto out;
+ }
+
+ event_control = open(event_control_path, O_WRONLY);
+ if (event_control == -1) {
+ fprintf(stderr, "Cannot open %s: %s\n", event_control_path,
+ strerror(errno));
+ goto out;
+ }
+
+ efd = eventfd(0, 0);
+ if (efd == -1) {
+ perror("eventfd() failed");
+ goto out;
+ }
+
+ ret = snprintf(line, LINE_MAX, "%d %d %s", efd, cfd, argv[2]);
+ if (ret >= LINE_MAX) {
+ fputs("Arguments string is too long\n", stderr);
+ goto out;
+ }
+
+ ret = write(event_control, line, strlen(line) + 1);
+ if (ret == -1) {
+ perror("Cannot write to cgroup.event_control");
+ goto out;
+ }
+
+ while (1) {
+ uint64_t result;
+
+ ret = read(efd, &result, sizeof(result));
+ if (ret == -1) {
+ if (errno == EINTR)
+ continue;
+ perror("Cannot read from eventfd");
+ break;
+ }
+ assert(ret == sizeof(result));
+
+ ret = access(event_control_path, W_OK);
+ if ((ret == -1) && (errno == ENOENT)) {
+ puts("The cgroup seems to have removed.");
+ ret = 0;
+ break;
+ }
+
+ if (ret == -1) {
+ perror("cgroup.event_control "
+ "is not accessable any more");
+ break;
+ }
+
+ printf("%s %s: crossed\n", argv[1], argv[2]);
+ }
+
+out:
+ if (efd >= 0)
+ close(efd);
+ if (event_control >= 0)
+ close(event_control);
+ if (cfd >= 0)
+ close(cfd);
+
+ return (ret != 0);
+}
diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt
index 0b33bfe7dde..b34823ff164 100644
--- a/Documentation/cgroups/cgroups.txt
+++ b/Documentation/cgroups/cgroups.txt
@@ -22,6 +22,8 @@ CONTENTS:
2. Usage Examples and Syntax
2.1 Basic Usage
2.2 Attaching processes
+ 2.3 Mounting hierarchies by name
+ 2.4 Notification API
3. Kernel API
3.1 Overview
3.2 Synchronization
@@ -233,8 +235,7 @@ containing the following files describing that cgroup:
- cgroup.procs: list of tgids in the cgroup. This list is not
guaranteed to be sorted or free of duplicate tgids, and userspace
should sort/uniquify the list if this property is required.
- Writing a tgid into this file moves all threads with that tgid into
- this cgroup.
+ This is a read-only file, for now.
- notify_on_release flag: run the release agent on exit?
- release_agent: the path to use for release notifications (this file
exists in the top cgroup only)
@@ -338,7 +339,7 @@ To mount a cgroup hierarchy with all available subsystems, type:
The "xxx" is not interpreted by the cgroup code, but will appear in
/proc/mounts so may be any useful identifying string that you like.
-To mount a cgroup hierarchy with just the cpuset and numtasks
+To mount a cgroup hierarchy with just the cpuset and memory
subsystems, type:
# mount -t cgroup -o cpuset,memory hier1 /dev/cgroup
@@ -434,6 +435,25 @@ you give a subsystem a name.
The name of the subsystem appears as part of the hierarchy description
in /proc/mounts and /proc/<pid>/cgroups.
+2.4 Notification API
+--------------------
+
+There is mechanism which allows to get notifications about changing
+status of a cgroup.
+
+To register new notification handler you need:
+ - create a file descriptor for event notification using eventfd(2);
+ - open a control file to be monitored (e.g. memory.usage_in_bytes);
+ - write "<event_fd> <control_fd> <args>" to cgroup.event_control.
+ Interpretation of args is defined by control file implementation;
+
+eventfd will be woken up by control file implementation or when the
+cgroup is removed.
+
+To unregister notification handler just close eventfd.
+
+NOTE: Support of notifications should be implemented for the control
+file. See documentation for the subsystem.
3. Kernel API
=============
@@ -488,6 +508,11 @@ Each subsystem should:
- add an entry in linux/cgroup_subsys.h
- define a cgroup_subsys object called <name>_subsys
+If a subsystem can be compiled as a module, it should also have in its
+module initcall a call to cgroup_load_subsys(), and in its exitcall a
+call to cgroup_unload_subsys(). It should also set its_subsys.module =
+THIS_MODULE in its .c file.
+
Each subsystem may export the following methods. The only mandatory
methods are create/destroy. Any others that are null are presumed to
be successful no-ops.
@@ -536,10 +561,21 @@ returns an error, this will abort the attach operation. If a NULL
task is passed, then a successful result indicates that *any*
unspecified task can be moved into the cgroup. Note that this isn't
called on a fork. If this method returns 0 (success) then this should
-remain valid while the caller holds cgroup_mutex. If threadgroup is
+remain valid while the caller holds cgroup_mutex and it is ensured that either
+attach() or cancel_attach() will be called in future. If threadgroup is
true, then a successful result indicates that all threads in the given
thread's threadgroup can be moved together.
+void cancel_attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
+ struct task_struct *task, bool threadgroup)
+(cgroup_mutex held by caller)
+
+Called when a task attach operation has failed after can_attach() has succeeded.
+A subsystem whose can_attach() has some side-effects should provide this
+function, so that the subsystem can implement a rollback. If not, not necessary.
+This will be called only about subsystems whose can_attach() operation have
+succeeded.
+
void attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
struct cgroup *old_cgrp, struct task_struct *task,
bool threadgroup)
diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt
index 1d7e9784439..5d0d5692a36 100644
--- a/Documentation/cgroups/cpusets.txt
+++ b/Documentation/cgroups/cpusets.txt
@@ -42,7 +42,7 @@ Nodes to a set of tasks. In this document "Memory Node" refers to
an on-line node that contains memory.
Cpusets constrain the CPU and Memory placement of tasks to only
-the resources within a tasks current cpuset. They form a nested
+the resources within a task's current cpuset. They form a nested
hierarchy visible in a virtual file system. These are the essential
hooks, beyond what is already present, required to manage dynamic
job placement on large systems.
@@ -53,11 +53,11 @@ Documentation/cgroups/cgroups.txt.
Requests by a task, using the sched_setaffinity(2) system call to
include CPUs in its CPU affinity mask, and using the mbind(2) and
set_mempolicy(2) system calls to include Memory Nodes in its memory
-policy, are both filtered through that tasks cpuset, filtering out any
+policy, are both filtered through that task's cpuset, filtering out any
CPUs or Memory Nodes not in that cpuset. The scheduler will not
schedule a task on a CPU that is not allowed in its cpus_allowed
vector, and the kernel page allocator will not allocate a page on a
-node that is not allowed in the requesting tasks mems_allowed vector.
+node that is not allowed in the requesting task's mems_allowed vector.
User level code may create and destroy cpusets by name in the cgroup
virtual file system, manage the attributes and permissions of these
@@ -121,9 +121,9 @@ Cpusets extends these two mechanisms as follows:
- Each task in the system is attached to a cpuset, via a pointer
in the task structure to a reference counted cgroup structure.
- Calls to sched_setaffinity are filtered to just those CPUs
- allowed in that tasks cpuset.
+ allowed in that task's cpuset.
- Calls to mbind and set_mempolicy are filtered to just
- those Memory Nodes allowed in that tasks cpuset.
+ those Memory Nodes allowed in that task's cpuset.
- The root cpuset contains all the systems CPUs and Memory
Nodes.
- For any cpuset, one can define child cpusets containing a subset
@@ -141,11 +141,11 @@ into the rest of the kernel, none in performance critical paths:
- in init/main.c, to initialize the root cpuset at system boot.
- in fork and exit, to attach and detach a task from its cpuset.
- in sched_setaffinity, to mask the requested CPUs by what's
- allowed in that tasks cpuset.
+ allowed in that task's cpuset.
- in sched.c migrate_live_tasks(), to keep migrating tasks within
the CPUs allowed by their cpuset, if possible.
- in the mbind and set_mempolicy system calls, to mask the requested
- Memory Nodes by what's allowed in that tasks cpuset.
+ Memory Nodes by what's allowed in that task's cpuset.
- in page_alloc.c, to restrict memory to allowed nodes.
- in vmscan.c, to restrict page recovery to the current cpuset.
@@ -155,7 +155,7 @@ new system calls are added for cpusets - all support for querying and
modifying cpusets is via this cpuset file system.
The /proc/<pid>/status file for each task has four added lines,
-displaying the tasks cpus_allowed (on which CPUs it may be scheduled)
+displaying the task's cpus_allowed (on which CPUs it may be scheduled)
and mems_allowed (on which Memory Nodes it may obtain memory),
in the two formats seen in the following example:
@@ -168,20 +168,20 @@ Each cpuset is represented by a directory in the cgroup file system
containing (on top of the standard cgroup files) the following
files describing that cpuset:
- - cpus: list of CPUs in that cpuset
- - mems: list of Memory Nodes in that cpuset
- - memory_migrate flag: if set, move pages to cpusets nodes
- - cpu_exclusive flag: is cpu placement exclusive?
- - mem_exclusive flag: is memory placement exclusive?
- - mem_hardwall flag: is memory allocation hardwalled
- - memory_pressure: measure of how much paging pressure in cpuset
- - memory_spread_page flag: if set, spread page cache evenly on allowed nodes
- - memory_spread_slab flag: if set, spread slab cache evenly on allowed nodes
- - sched_load_balance flag: if set, load balance within CPUs on that cpuset
- - sched_relax_domain_level: the searching range when migrating tasks
+ - cpuset.cpus: list of CPUs in that cpuset
+ - cpuset.mems: list of Memory Nodes in that cpuset
+ - cpuset.memory_migrate flag: if set, move pages to cpusets nodes
+ - cpuset.cpu_exclusive flag: is cpu placement exclusive?
+ - cpuset.mem_exclusive flag: is memory placement exclusive?
+ - cpuset.mem_hardwall flag: is memory allocation hardwalled
+ - cpuset.memory_pressure: measure of how much paging pressure in cpuset
+ - cpuset.memory_spread_page flag: if set, spread page cache evenly on allowed nodes
+ - cpuset.memory_spread_slab flag: if set, spread slab cache evenly on allowed nodes
+ - cpuset.sched_load_balance flag: if set, load balance within CPUs on that cpuset
+ - cpuset.sched_relax_domain_level: the searching range when migrating tasks
In addition, the root cpuset only has the following file:
- - memory_pressure_enabled flag: compute memory_pressure?
+ - cpuset.memory_pressure_enabled flag: compute memory_pressure?
New cpusets are created using the mkdir system call or shell
command. The properties of a cpuset, such as its flags, allowed
@@ -229,7 +229,7 @@ If a cpuset is cpu or mem exclusive, no other cpuset, other than
a direct ancestor or descendant, may share any of the same CPUs or
Memory Nodes.
-A cpuset that is mem_exclusive *or* mem_hardwall is "hardwalled",
+A cpuset that is cpuset.mem_exclusive *or* cpuset.mem_hardwall is "hardwalled",
i.e. it restricts kernel allocations for page, buffer and other data
commonly shared by the kernel across multiple users. All cpusets,
whether hardwalled or not, restrict allocations of memory for user
@@ -304,15 +304,15 @@ times 1000.
---------------------------
There are two boolean flag files per cpuset that control where the
kernel allocates pages for the file system buffers and related in
-kernel data structures. They are called 'memory_spread_page' and
-'memory_spread_slab'.
+kernel data structures. They are called 'cpuset.memory_spread_page' and
+'cpuset.memory_spread_slab'.
-If the per-cpuset boolean flag file 'memory_spread_page' is set, then
+If the per-cpuset boolean flag file 'cpuset.memory_spread_page' is set, then
the kernel will spread the file system buffers (page cache) evenly
over all the nodes that the faulting task is allowed to use, instead
of preferring to put those pages on the node where the task is running.
-If the per-cpuset boolean flag file 'memory_spread_slab' is set,
+If the per-cpuset boolean flag file 'cpuset.memory_spread_slab' is set,
then the kernel will spread some file system related slab caches,
such as for inodes and dentries evenly over all the nodes that the
faulting task is allowed to use, instead of preferring to put those
@@ -323,41 +323,41 @@ stack segment pages of a task.
By default, both kinds of memory spreading are off, and memory
pages are allocated on the node local to where the task is running,
-except perhaps as modified by the tasks NUMA mempolicy or cpuset
+except perhaps as modified by the task's NUMA mempolicy or cpuset
configuration, so long as sufficient free memory pages are available.
When new cpusets are created, they inherit the memory spread settings
of their parent.
Setting memory spreading causes allocations for the affected page
-or slab caches to ignore the tasks NUMA mempolicy and be spread
+or slab caches to ignore the task's NUMA mempolicy and be spread
instead. Tasks using mbind() or set_mempolicy() calls to set NUMA
mempolicies will not notice any change in these calls as a result of
-their containing tasks memory spread settings. If memory spreading
+their containing task's memory spread settings. If memory spreading
is turned off, then the currently specified NUMA mempolicy once again
applies to memory page allocations.
-Both 'memory_spread_page' and 'memory_spread_slab' are boolean flag
+Both 'cpuset.memory_spread_page' and 'cpuset.memory_spread_slab' are boolean flag
files. By default they contain "0", meaning that the feature is off
for that cpuset. If a "1" is written to that file, then that turns
the named feature on.
The implementation is simple.
-Setting the flag 'memory_spread_page' turns on a per-process flag
+Setting the flag 'cpuset.memory_spread_page' turns on a per-process flag
PF_SPREAD_PAGE for each task that is in that cpuset or subsequently
joins that cpuset. The page allocation calls for the page cache
is modified to perform an inline check for this PF_SPREAD_PAGE task
flag, and if set, a call to a new routine cpuset_mem_spread_node()
returns the node to prefer for the allocation.
-Similarly, setting 'memory_spread_slab' turns on the flag
+Similarly, setting 'cpuset.memory_spread_slab' turns on the flag
PF_SPREAD_SLAB, and appropriately marked slab caches will allocate
pages from the node returned by cpuset_mem_spread_node().
The cpuset_mem_spread_node() routine is also simple. It uses the
value of a per-task rotor cpuset_mem_spread_rotor to select the next
-node in the current tasks mems_allowed to prefer for the allocation.
+node in the current task's mems_allowed to prefer for the allocation.
This memory placement policy is also known (in other contexts) as
round-robin or interleave.
@@ -404,24 +404,24 @@ the following two situations:
system overhead on those CPUs, including avoiding task load
balancing if that is not needed.
-When the per-cpuset flag "sched_load_balance" is enabled (the default
-setting), it requests that all the CPUs in that cpusets allowed 'cpus'
+When the per-cpuset flag "cpuset.sched_load_balance" is enabled (the default
+setting), it requests that all the CPUs in that cpusets allowed 'cpuset.cpus'
be contained in a single sched domain, ensuring that load balancing
can move a task (not otherwised pinned, as by sched_setaffinity)
from any CPU in that cpuset to any other.
-When the per-cpuset flag "sched_load_balance" is disabled, then the
+When the per-cpuset flag "cpuset.sched_load_balance" is disabled, then the
scheduler will avoid load balancing across the CPUs in that cpuset,
--except-- in so far as is necessary because some overlapping cpuset
has "sched_load_balance" enabled.
-So, for example, if the top cpuset has the flag "sched_load_balance"
+So, for example, if the top cpuset has the flag "cpuset.sched_load_balance"
enabled, then the scheduler will have one sched domain covering all
-CPUs, and the setting of the "sched_load_balance" flag in any other
+CPUs, and the setting of the "cpuset.sched_load_balance" flag in any other
cpusets won't matter, as we're already fully load balancing.
Therefore in the above two situations, the top cpuset flag
-"sched_load_balance" should be disabled, and only some of the smaller,
+"cpuset.sched_load_balance" should be disabled, and only some of the smaller,
child cpusets have this flag enabled.
When doing this, you don't usually want to leave any unpinned tasks in
@@ -433,7 +433,7 @@ scheduler might not consider the possibility of load balancing that
task to that underused CPU.
Of course, tasks pinned to a particular CPU can be left in a cpuset
-that disables "sched_load_balance" as those tasks aren't going anywhere
+that disables "cpuset.sched_load_balance" as those tasks aren't going anywhere
else anyway.
There is an impedance mismatch here, between cpusets and sched domains.
@@ -443,19 +443,19 @@ overlap and each CPU is in at most one sched domain.
It is necessary for sched domains to be flat because load balancing
across partially overlapping sets of CPUs would risk unstable dynamics
that would be beyond our understanding. So if each of two partially
-overlapping cpusets enables the flag 'sched_load_balance', then we
+overlapping cpusets enables the flag 'cpuset.sched_load_balance', then we
form a single sched domain that is a superset of both. We won't move
a task to a CPU outside it cpuset, but the scheduler load balancing
code might waste some compute cycles considering that possibility.
This mismatch is why there is not a simple one-to-one relation
-between which cpusets have the flag "sched_load_balance" enabled,
+between which cpusets have the flag "cpuset.sched_load_balance" enabled,
and the sched domain configuration. If a cpuset enables the flag, it
will get balancing across all its CPUs, but if it disables the flag,
it will only be assured of no load balancing if no other overlapping
cpuset enables the flag.
-If two cpusets have partially overlapping 'cpus' allowed, and only
+If two cpusets have partially overlapping 'cpuset.cpus' allowed, and only
one of them has this flag enabled, then the other may find its
tasks only partially load balanced, just on the overlapping CPUs.
This is just the general case of the top_cpuset example given a few
@@ -468,23 +468,23 @@ load balancing to the other CPUs.
1.7.1 sched_load_balance implementation details.
------------------------------------------------
-The per-cpuset flag 'sched_load_balance' defaults to enabled (contrary
+The per-cpuset flag 'cpuset.sched_load_balance' defaults to enabled (contrary
to most cpuset flags.) When enabled for a cpuset, the kernel will
ensure that it can load balance across all the CPUs in that cpuset
(makes sure that all the CPUs in the cpus_allowed of that cpuset are
in the same sched domain.)
-If two overlapping cpusets both have 'sched_load_balance' enabled,
+If two overlapping cpusets both have 'cpuset.sched_load_balance' enabled,
then they will be (must be) both in the same sched domain.
-If, as is the default, the top cpuset has 'sched_load_balance' enabled,
+If, as is the default, the top cpuset has 'cpuset.sched_load_balance' enabled,
then by the above that means there is a single sched domain covering
the whole system, regardless of any other cpuset settings.
The kernel commits to user space that it will avoid load balancing
where it can. It will pick as fine a granularity partition of sched
domains as it can while still providing load balancing for any set
-of CPUs allowed to a cpuset having 'sched_load_balance' enabled.
+of CPUs allowed to a cpuset having 'cpuset.sched_load_balance' enabled.
The internal kernel cpuset to scheduler interface passes from the
cpuset code to the scheduler code a partition of the load balanced
@@ -495,9 +495,9 @@ all the CPUs that must be load balanced.
The cpuset code builds a new such partition and passes it to the
scheduler sched domain setup code, to have the sched domains rebuilt
as necessary, whenever:
- - the 'sched_load_balance' flag of a cpuset with non-empty CPUs changes,
+ - the 'cpuset.sched_load_balance' flag of a cpuset with non-empty CPUs changes,
- or CPUs come or go from a cpuset with this flag enabled,
- - or 'sched_relax_domain_level' value of a cpuset with non-empty CPUs
+ - or 'cpuset.sched_relax_domain_level' value of a cpuset with non-empty CPUs
and with this flag enabled changes,
- or a cpuset with non-empty CPUs and with this flag enabled is removed,
- or a cpu is offlined/onlined.
@@ -542,7 +542,7 @@ As the result, task B on CPU X need to wait task A or wait load balance
on the next tick. For some applications in special situation, waiting
1 tick may be too long.
-The 'sched_relax_domain_level' file allows you to request changing
+The 'cpuset.sched_relax_domain_level' file allows you to request changing
this searching range as you like. This file takes int value which
indicates size of searching range in levels ideally as follows,
otherwise initial value -1 that indicates the cpuset has no request.
@@ -559,8 +559,8 @@ The system default is architecture dependent. The system default
can be changed using the relax_domain_level= boot parameter.
This file is per-cpuset and affect the sched domain where the cpuset
-belongs to. Therefore if the flag 'sched_load_balance' of a cpuset
-is disabled, then 'sched_relax_domain_level' have no effect since
+belongs to. Therefore if the flag 'cpuset.sched_load_balance' of a cpuset
+is disabled, then 'cpuset.sched_relax_domain_level' have no effect since
there is no sched domain belonging the cpuset.
If multiple cpusets are overlapping and hence they form a single sched
@@ -594,7 +594,7 @@ is attached, is subtle.
If a cpuset has its Memory Nodes modified, then for each task attached
to that cpuset, the next time that the kernel attempts to allocate
a page of memory for that task, the kernel will notice the change
-in the tasks cpuset, and update its per-task memory placement to
+in the task's cpuset, and update its per-task memory placement to
remain within the new cpusets memory placement. If the task was using
mempolicy MPOL_BIND, and the nodes to which it was bound overlap with
its new cpuset, then the task will continue to use whatever subset
@@ -603,13 +603,13 @@ was using MPOL_BIND and now none of its MPOL_BIND nodes are allowed
in the new cpuset, then the task will be essentially treated as if it
was MPOL_BIND bound to the new cpuset (even though its NUMA placement,
as queried by get_mempolicy(), doesn't change). If a task is moved
-from one cpuset to another, then the kernel will adjust the tasks
+from one cpuset to another, then the kernel will adjust the task's
memory placement, as above, the next time that the kernel attempts
to allocate a page of memory for that task.
-If a cpuset has its 'cpus' modified, then each task in that cpuset
+If a cpuset has its 'cpuset.cpus' modified, then each task in that cpuset
will have its allowed CPU placement changed immediately. Similarly,
-if a tasks pid is written to another cpusets 'tasks' file, then its
+if a task's pid is written to another cpusets 'cpuset.tasks' file, then its
allowed CPU placement is changed immediately. If such a task had been
bound to some subset of its cpuset using the sched_setaffinity() call,
the task will be allowed to run on any CPU allowed in its new cpuset,
@@ -622,21 +622,21 @@ and the processor placement is updated immediately.
Normally, once a page is allocated (given a physical page
of main memory) then that page stays on whatever node it
was allocated, so long as it remains allocated, even if the
-cpusets memory placement policy 'mems' subsequently changes.
-If the cpuset flag file 'memory_migrate' is set true, then when
+cpusets memory placement policy 'cpuset.mems' subsequently changes.
+If the cpuset flag file 'cpuset.memory_migrate' is set true, then when
tasks are attached to that cpuset, any pages that task had
allocated to it on nodes in its previous cpuset are migrated
-to the tasks new cpuset. The relative placement of the page within
+to the task's new cpuset. The relative placement of the page within
the cpuset is preserved during these migration operations if possible.
For example if the page was on the second valid node of the prior cpuset
then the page will be placed on the second valid node of the new cpuset.
-Also if 'memory_migrate' is set true, then if that cpusets
-'mems' file is modified, pages allocated to tasks in that
-cpuset, that were on nodes in the previous setting of 'mems',
+Also if 'cpuset.memory_migrate' is set true, then if that cpuset's
+'cpuset.mems' file is modified, pages allocated to tasks in that
+cpuset, that were on nodes in the previous setting of 'cpuset.mems',
will be moved to nodes in the new setting of 'mems.'
-Pages that were not in the tasks prior cpuset, or in the cpusets
-prior 'mems' setting, will not be moved.
+Pages that were not in the task's prior cpuset, or in the cpuset's
+prior 'cpuset.mems' setting, will not be moved.
There is an exception to the above. If hotplug functionality is used
to remove all the CPUs that are currently assigned to a cpuset,
@@ -655,7 +655,7 @@ There is a second exception to the above. GFP_ATOMIC requests are
kernel internal allocations that must be satisfied, immediately.
The kernel may drop some request, in rare cases even panic, if a
GFP_ATOMIC alloc fails. If the request cannot be satisfied within
-the current tasks cpuset, then we relax the cpuset, and look for
+the current task's cpuset, then we relax the cpuset, and look for
memory anywhere we can find it. It's better to violate the cpuset
than stress the kernel.
@@ -678,8 +678,8 @@ and then start a subshell 'sh' in that cpuset:
cd /dev/cpuset
mkdir Charlie
cd Charlie
- /bin/echo 2-3 > cpus
- /bin/echo 1 > mems
+ /bin/echo 2-3 > cpuset.cpus
+ /bin/echo 1 > cpuset.mems
/bin/echo $$ > tasks
sh
# The subshell 'sh' is now running in cpuset Charlie
@@ -691,7 +691,7 @@ There are ways to query or modify cpusets:
cat, rmdir commands from the shell, or their equivalent from C.
- via the C library libcpuset.
- via the C library libcgroup.
- (http://sourceforge.net/proects/libcg/)
+ (http://sourceforge.net/projects/libcg/)
- via the python application cset.
(http://developer.novell.com/wiki/index.php/Cpuset)
@@ -725,10 +725,13 @@ Now you want to do something with this cpuset.
In this directory you can find several files:
# ls
-cpu_exclusive memory_migrate mems tasks
-cpus memory_pressure notify_on_release
-mem_exclusive memory_spread_page sched_load_balance
-mem_hardwall memory_spread_slab sched_relax_domain_level
+cpuset.cpu_exclusive cpuset.memory_spread_slab
+cpuset.cpus cpuset.mems
+cpuset.mem_exclusive cpuset.sched_load_balance
+cpuset.mem_hardwall cpuset.sched_relax_domain_level
+cpuset.memory_migrate notify_on_release
+cpuset.memory_pressure tasks
+cpuset.memory_spread_page
Reading them will give you information about the state of this cpuset:
the CPUs and Memory Nodes it can use, the processes that are using
@@ -736,13 +739,13 @@ it, its properties. By writing to these files you can manipulate
the cpuset.
Set some flags:
-# /bin/echo 1 > cpu_exclusive
+# /bin/echo 1 > cpuset.cpu_exclusive
Add some cpus:
-# /bin/echo 0-7 > cpus
+# /bin/echo 0-7 > cpuset.cpus
Add some mems:
-# /bin/echo 0-7 > mems
+# /bin/echo 0-7 > cpuset.mems
Now attach your shell to this cpuset:
# /bin/echo $$ > tasks
@@ -774,28 +777,28 @@ echo "/sbin/cpuset_release_agent" > /dev/cpuset/release_agent
This is the syntax to use when writing in the cpus or mems files
in cpuset directories:
-# /bin/echo 1-4 > cpus -> set cpus list to cpus 1,2,3,4
-# /bin/echo 1,2,3,4 > cpus -> set cpus list to cpus 1,2,3,4
+# /bin/echo 1-4 > cpuset.cpus -> set cpus list to cpus 1,2,3,4
+# /bin/echo 1,2,3,4 > cpuset.cpus -> set cpus list to cpus 1,2,3,4
To add a CPU to a cpuset, write the new list of CPUs including the
CPU to be added. To add 6 to the above cpuset:
-# /bin/echo 1-4,6 > cpus -> set cpus list to cpus 1,2,3,4,6
+# /bin/echo 1-4,6 > cpuset.cpus -> set cpus list to cpus 1,2,3,4,6
Similarly to remove a CPU from a cpuset, write the new list of CPUs
without the CPU to be removed.
To remove all the CPUs:
-# /bin/echo "" > cpus -> clear cpus list
+# /bin/echo "" > cpuset.cpus -> clear cpus list
2.3 Setting flags
-----------------
The syntax is very simple:
-# /bin/echo 1 > cpu_exclusive -> set flag 'cpu_exclusive'
-# /bin/echo 0 > cpu_exclusive -> unset flag 'cpu_exclusive'
+# /bin/echo 1 > cpuset.cpu_exclusive -> set flag 'cpuset.cpu_exclusive'
+# /bin/echo 0 > cpuset.cpu_exclusive -> unset flag 'cpuset.cpu_exclusive'
2.4 Attaching processes
-----------------------
diff --git a/Documentation/cgroups/memcg_test.txt b/Documentation/cgroups/memcg_test.txt
index 72db89ed060..b7eececfb19 100644
--- a/Documentation/cgroups/memcg_test.txt
+++ b/Documentation/cgroups/memcg_test.txt
@@ -1,6 +1,6 @@
Memory Resource Controller(Memcg) Implementation Memo.
-Last Updated: 2009/1/20
-Base Kernel Version: based on 2.6.29-rc2.
+Last Updated: 2010/2
+Base Kernel Version: based on 2.6.33-rc7-mm(candidate for 34).
Because VM is getting complex (one of reasons is memcg...), memcg's behavior
is complex. This is a document for memcg's internal behavior.
@@ -244,7 +244,7 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
we have to check if OLDPAGE/NEWPAGE is a valid page after commit().
8. LRU
- Each memcg has its own private LRU. Now, it's handling is under global
+ Each memcg has its own private LRU. Now, its handling is under global
VM's control (means that it's handled under global zone->lru_lock).
Almost all routines around memcg's LRU is called by global LRU's
list management functions under zone->lru_lock().
@@ -337,7 +337,7 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
race and lock dependency with other cgroup subsystems.
example)
- # mount -t cgroup none /cgroup -t cpuset,memory,cpu,devices
+ # mount -t cgroup none /cgroup -o cpuset,memory,cpu,devices
and do task move, mkdir, rmdir etc...under this.
@@ -348,7 +348,7 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
For example, test like following is good.
(Shell-A)
- # mount -t cgroup none /cgroup -t memory
+ # mount -t cgroup none /cgroup -o memory
# mkdir /cgroup/test
# echo 40M > /cgroup/test/memory.limit_in_bytes
# echo 0 > /cgroup/test/tasks
@@ -378,3 +378,42 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
#echo 50M > memory.limit_in_bytes
#echo 50M > memory.memsw.limit_in_bytes
run 51M of malloc
+
+ 9.9 Move charges at task migration
+ Charges associated with a task can be moved along with task migration.
+
+ (Shell-A)
+ #mkdir /cgroup/A
+ #echo $$ >/cgroup/A/tasks
+ run some programs which uses some amount of memory in /cgroup/A.
+
+ (Shell-B)
+ #mkdir /cgroup/B
+ #echo 1 >/cgroup/B/memory.move_charge_at_immigrate
+ #echo "pid of the program running in group A" >/cgroup/B/tasks
+
+ You can see charges have been moved by reading *.usage_in_bytes or
+ memory.stat of both A and B.
+ See 8.2 of Documentation/cgroups/memory.txt to see what value should be
+ written to move_charge_at_immigrate.
+
+ 9.10 Memory thresholds
+ Memory controler implements memory thresholds using cgroups notification
+ API. You can use Documentation/cgroups/cgroup_event_listener.c to test
+ it.
+
+ (Shell-A) Create cgroup and run event listener
+ # mkdir /cgroup/A
+ # ./cgroup_event_listener /cgroup/A/memory.usage_in_bytes 5M
+
+ (Shell-B) Add task to cgroup and try to allocate and free memory
+ # echo $$ >/cgroup/A/tasks
+ # a="$(dd if=/dev/zero bs=1M count=10)"
+ # a=
+
+ You will see message from cgroup_event_listener every time you cross
+ the thresholds.
+
+ Use /cgroup/A/memory.memsw.usage_in_bytes to test memsw thresholds.
+
+ It's good idea to test root cgroup as well.
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index b871f2552b4..7781857dc94 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -1,18 +1,15 @@
Memory Resource Controller
NOTE: The Memory Resource Controller has been generically been referred
-to as the memory controller in this document. Do not confuse memory controller
-used here with the memory controller that is used in hardware.
+ to as the memory controller in this document. Do not confuse memory
+ controller used here with the memory controller that is used in hardware.
-Salient features
-
-a. Enable control of Anonymous, Page Cache (mapped and unmapped) and
- Swap Cache memory pages.
-b. The infrastructure allows easy addition of other types of memory to control
-c. Provides *zero overhead* for non memory controller users
-d. Provides a double LRU: global memory pressure causes reclaim from the
- global LRU; a cgroup on hitting a limit, reclaims from the per
- cgroup LRU
+(For editors)
+In this document:
+ When we mention a cgroup (cgroupfs's directory) with memory controller,
+ we call it "memory cgroup". When you see git-log and source code, you'll
+ see patch's title and function names tend to use "memcg".
+ In this document, we avoid using it.
Benefits and Purpose of the memory controller
@@ -33,6 +30,45 @@ d. A CD/DVD burner could control the amount of memory used by the
e. There are several other use cases, find one or use the controller just
for fun (to learn and hack on the VM subsystem).
+Current Status: linux-2.6.34-mmotm(development version of 2010/April)
+
+Features:
+ - accounting anonymous pages, file caches, swap caches usage and limiting them.
+ - private LRU and reclaim routine. (system's global LRU and private LRU
+ work independently from each other)
+ - optionally, memory+swap usage can be accounted and limited.
+ - hierarchical accounting
+ - soft limit
+ - moving(recharging) account at moving a task is selectable.
+ - usage threshold notifier
+ - oom-killer disable knob and oom-notifier
+ - Root cgroup has no limit controls.
+
+ Kernel memory and Hugepages are not under control yet. We just manage
+ pages on LRU. To add more controls, we have to take care of performance.
+
+Brief summary of control files.
+
+ tasks # attach a task(thread) and show list of threads
+ cgroup.procs # show list of processes
+ cgroup.event_control # an interface for event_fd()
+ memory.usage_in_bytes # show current memory(RSS+Cache) usage.
+ memory.memsw.usage_in_bytes # show current memory+Swap usage
+ memory.limit_in_bytes # set/show limit of memory usage
+ memory.memsw.limit_in_bytes # set/show limit of memory+Swap usage
+ memory.failcnt # show the number of memory usage hits limits
+ memory.memsw.failcnt # show the number of memory+Swap hits limits
+ memory.max_usage_in_bytes # show max memory usage recorded
+ memory.memsw.usage_in_bytes # show max memory+Swap usage recorded
+ memory.soft_limit_in_bytes # set/show soft limit of memory usage
+ memory.stat # show various statistics
+ memory.use_hierarchy # set/show hierarchical account enabled
+ memory.force_empty # trigger forced move charge to parent
+ memory.swappiness # set/show swappiness parameter of vmscan
+ (See sysctl's vm.swappiness)
+ memory.move_charge_at_immigrate # set/show controls of moving charges
+ memory.oom_control # set/show oom controls.
+
1. History
The memory controller has a long history. A request for comments for the memory
@@ -106,14 +142,14 @@ the necessary data structures and check if the cgroup that is being charged
is over its limit. If it is then reclaim is invoked on the cgroup.
More details can be found in the reclaim section of this document.
If everything goes well, a page meta-data-structure called page_cgroup is
-allocated and associated with the page. This routine also adds the page to
-the per cgroup LRU.
+updated. page_cgroup has its own LRU on cgroup.
+(*) page_cgroup structure is allocated at boot/memory-hotplug time.
2.2.1 Accounting details
All mapped anon pages (RSS) and cache pages (Page Cache) are accounted.
-(some pages which never be reclaimable and will not be on global LRU
- are not accounted. we just accounts pages under usual vm management.)
+Some pages which are never reclaimable and will not be on the global LRU
+are not accounted. We just account pages under usual VM management.
RSS pages are accounted at page_fault unless they've already been accounted
for earlier. A file page will be accounted for as Page Cache when it's
@@ -121,12 +157,19 @@ inserted into inode (radix-tree). While it's mapped into the page tables of
processes, duplicate accounting is carefully avoided.
A RSS page is unaccounted when it's fully unmapped. A PageCache page is
-unaccounted when it's removed from radix-tree.
+unaccounted when it's removed from radix-tree. Even if RSS pages are fully
+unmapped (by kswapd), they may exist as SwapCache in the system until they
+are really freed. Such SwapCaches also also accounted.
+A swapped-in page is not accounted until it's mapped.
+
+Note: The kernel does swapin-readahead and read multiple swaps at once.
+This means swapped-in pages may contain pages for other tasks than a task
+causing page fault. So, we avoid accounting at swap-in I/O.
At page migration, accounting information is kept.
-Note: we just account pages-on-lru because our purpose is to control amount
-of used pages. not-on-lru pages are tend to be out-of-control from vm view.
+Note: we just account pages-on-LRU because our purpose is to control amount
+of used pages; not-on-LRU pages tend to be out-of-control from VM view.
2.3 Shared Page Accounting
@@ -143,6 +186,7 @@ caller of swapoff rather than the users of shmem.
2.4 Swap Extension (CONFIG_CGROUP_MEM_RES_CTLR_SWAP)
+
Swap Extension allows you to record charge for swap. A swapped-in page is
charged back to original page allocator if possible.
@@ -150,13 +194,20 @@ When swap is accounted, following files are added.
- memory.memsw.usage_in_bytes.
- memory.memsw.limit_in_bytes.
-usage of mem+swap is limited by memsw.limit_in_bytes.
+memsw means memory+swap. Usage of memory+swap is limited by
+memsw.limit_in_bytes.
-* why 'mem+swap' rather than swap.
+Example: Assume a system with 4G of swap. A task which allocates 6G of memory
+(by mistake) under 2G memory limitation will use all swap.
+In this case, setting memsw.limit_in_bytes=3G will prevent bad use of swap.
+By using memsw limit, you can avoid system OOM which can be caused by swap
+shortage.
+
+* why 'memory+swap' rather than swap.
The global LRU(kswapd) can swap out arbitrary pages. Swap-out means
to move account from memory to swap...there is no change in usage of
-mem+swap. In other words, when we want to limit the usage of swap without
-affecting global LRU, mem+swap limit is better than just limiting swap from
+memory+swap. In other words, when we want to limit the usage of swap without
+affecting global LRU, memory+swap limit is better than just limiting swap from
OS point of view.
* What happens when a cgroup hits memory.memsw.limit_in_bytes
@@ -168,12 +219,12 @@ it by cgroup.
2.5 Reclaim
-Each cgroup maintains a per cgroup LRU that consists of an active
-and inactive list. When a cgroup goes over its limit, we first try
+Each cgroup maintains a per cgroup LRU which has the same structure as
+global VM. When a cgroup goes over its limit, we first try
to reclaim memory from the cgroup so as to make space for the new
pages that the cgroup has touched. If the reclaim is unsuccessful,
an OOM routine is invoked to select and kill the bulkiest task in the
-cgroup.
+cgroup. (See 10. OOM Control below.)
The reclaim algorithm has not been modified for cgroups, except that
pages that are selected for reclaiming come from the per cgroup LRU
@@ -182,13 +233,24 @@ list.
NOTE: Reclaim does not work for the root cgroup, since we cannot set any
limits on the root cgroup.
-2. Locking
+Note2: When panic_on_oom is set to "2", the whole system will panic.
+
+When oom event notifier is registered, event will be delivered.
+(See oom_control section)
+
+2.6 Locking
-The memory controller uses the following hierarchy
+ lock_page_cgroup()/unlock_page_cgroup() should not be called under
+ mapping->tree_lock.
-1. zone->lru_lock is used for selecting pages to be isolated
-2. mem->per_zone->lru_lock protects the per cgroup LRU (per zone)
-3. lock_page_cgroup() is used to protect page->page_cgroup
+ Other lock order is following:
+ PG_locked.
+ mm->page_table_lock
+ zone->lru_lock
+ lock_page_cgroup.
+ In many cases, just lock_page_cgroup() is called.
+ per-zone-per-cgroup LRU (cgroup's private LRU) is just guarded by
+ zone->lru_lock, it has no lock of its own.
3. User Interface
@@ -197,6 +259,7 @@ The memory controller uses the following hierarchy
a. Enable CONFIG_CGROUPS
b. Enable CONFIG_RESOURCE_COUNTERS
c. Enable CONFIG_CGROUP_MEM_RES_CTLR
+d. Enable CONFIG_CGROUP_MEM_RES_CTLR_SWAP (to use swap extension)
1. Prepare the cgroups
# mkdir -p /cgroups
@@ -204,31 +267,28 @@ c. Enable CONFIG_CGROUP_MEM_RES_CTLR
2. Make the new group and move bash into it
# mkdir /cgroups/0
-# echo $$ > /cgroups/0/tasks
+# echo $$ > /cgroups/0/tasks
-Since now we're in the 0 cgroup,
-We can alter the memory limit:
+Since now we're in the 0 cgroup, we can alter the memory limit:
# echo 4M > /cgroups/0/memory.limit_in_bytes
NOTE: We can use a suffix (k, K, m, M, g or G) to indicate values in kilo,
-mega or gigabytes.
+mega or gigabytes. (Here, Kilo, Mega, Giga are Kibibytes, Mebibytes, Gibibytes.)
+
NOTE: We can write "-1" to reset the *.limit_in_bytes(unlimited).
NOTE: We cannot set limits on the root cgroup any more.
# cat /cgroups/0/memory.limit_in_bytes
4194304
-NOTE: The interface has now changed to display the usage in bytes
-instead of pages
-
We can check the usage:
# cat /cgroups/0/memory.usage_in_bytes
1216512
A successful write to this file does not guarantee a successful set of
-this limit to the value written into the file. This can be due to a
+this limit to the value written into the file. This can be due to a
number of factors, such as rounding up to page boundaries or the total
-availability of memory on the system. The user is required to re-read
+availability of memory on the system. The user is required to re-read
this file after a write to guarantee the value committed by the kernel.
# echo 1 > memory.limit_in_bytes
@@ -243,15 +303,23 @@ caches, RSS and Active pages/Inactive pages are shown.
4. Testing
-Balbir posted lmbench, AIM9, LTP and vmmstress results [10] and [11].
-Apart from that v6 has been tested with several applications and regular
-daily use. The controller has also been tested on the PPC64, x86_64 and
-UML platforms.
+For testing features and implementation, see memcg_test.txt.
+
+Performance test is also important. To see pure memory controller's overhead,
+testing on tmpfs will give you good numbers of small overheads.
+Example: do kernel make on tmpfs.
+
+Page-fault scalability is also important. At measuring parallel
+page fault test, multi-process test may be better than multi-thread
+test because it has noise of shared objects/status.
+
+But the above two are testing extreme situations.
+Trying usual test under memory controller is always helpful.
4.1 Troubleshooting
Sometimes a user might find that the application under a cgroup is
-terminated. There are several causes for this:
+terminated by OOM killer. There are several causes for this:
1. The cgroup limit is too low (just too low to do anything useful)
2. The user is using anonymous memory and swap is turned off or too low
@@ -259,21 +327,29 @@ terminated. There are several causes for this:
A sync followed by echo 1 > /proc/sys/vm/drop_caches will help get rid of
some of the pages cached in the cgroup (page cache pages).
+To know what happens, disable OOM_Kill by 10. OOM Control(see below) and
+seeing what happens will be helpful.
+
4.2 Task migration
-When a task migrates from one cgroup to another, it's charge is not
-carried forward. The pages allocated from the original cgroup still
+When a task migrates from one cgroup to another, its charge is not
+carried forward by default. The pages allocated from the original cgroup still
remain charged to it, the charge is dropped when the page is freed or
reclaimed.
+You can move charges of a task along with task migration.
+See 8. "Move charges at task migration"
+
4.3 Removing a cgroup
A cgroup can be removed by rmdir, but as discussed in sections 4.1 and 4.2, a
cgroup might have some charge associated with it, even though all
-tasks have migrated away from it.
-Such charges are freed(at default) or moved to its parent. When moved,
-both of RSS and CACHES are moved to parent.
-If both of them are busy, rmdir() returns -EBUSY. See 5.1 Also.
+tasks have migrated away from it. (because we charge against pages, not
+against tasks.)
+
+Such charges are freed or moved to their parent. At moving, both of RSS
+and CACHES are moved to parent.
+rmdir() may return -EBUSY if freeing/moving fails. See 5.1 also.
Charges recorded in swap information is not updated at removal of cgroup.
Recorded information is discarded and a cgroup which uses swap (swapcache)
@@ -289,10 +365,10 @@ will be charged as a new owner of it.
# echo 0 > memory.force_empty
- Almost all pages tracked by this memcg will be unmapped and freed. Some of
- pages cannot be freed because it's locked or in-use. Such pages are moved
- to parent and this cgroup will be empty. But this may return -EBUSY in
- some too busy case.
+ Almost all pages tracked by this memory cgroup will be unmapped and freed.
+ Some pages cannot be freed because they are locked or in-use. Such pages are
+ moved to parent and this cgroup will be empty. This may return -EBUSY if
+ VM is too busy to free/move all pages immediately.
Typical use case of this interface is that calling this before rmdir().
Because rmdir() moves all pages to parent, some out-of-use page caches can be
@@ -302,19 +378,41 @@ will be charged as a new owner of it.
memory.stat file includes following statistics
+# per-memory cgroup local status
cache - # of bytes of page cache memory.
rss - # of bytes of anonymous and swap cache memory.
+mapped_file - # of bytes of mapped file (includes tmpfs/shmem)
pgpgin - # of pages paged in (equivalent to # of charging events).
pgpgout - # of pages paged out (equivalent to # of uncharging events).
-active_anon - # of bytes of anonymous and swap cache memory on active
- lru list.
+swap - # of bytes of swap usage
inactive_anon - # of bytes of anonymous memory and swap cache memory on
- inactive lru list.
-active_file - # of bytes of file-backed memory on active lru list.
-inactive_file - # of bytes of file-backed memory on inactive lru list.
+ LRU list.
+active_anon - # of bytes of anonymous and swap cache memory on active
+ inactive LRU list.
+inactive_file - # of bytes of file-backed memory on inactive LRU list.
+active_file - # of bytes of file-backed memory on active LRU list.
unevictable - # of bytes of memory that cannot be reclaimed (mlocked etc).
-The following additional stats are dependent on CONFIG_DEBUG_VM.
+# status considering hierarchy (see memory.use_hierarchy settings)
+
+hierarchical_memory_limit - # of bytes of memory limit with regard to hierarchy
+ under which the memory cgroup is
+hierarchical_memsw_limit - # of bytes of memory+swap limit with regard to
+ hierarchy under which memory cgroup is.
+
+total_cache - sum of all children's "cache"
+total_rss - sum of all children's "rss"
+total_mapped_file - sum of all children's "cache"
+total_pgpgin - sum of all children's "pgpgin"
+total_pgpgout - sum of all children's "pgpgout"
+total_swap - sum of all children's "swap"
+total_inactive_anon - sum of all children's "inactive_anon"
+total_active_anon - sum of all children's "active_anon"
+total_inactive_file - sum of all children's "inactive_file"
+total_active_file - sum of all children's "active_file"
+total_unevictable - sum of all children's "unevictable"
+
+# The following additional stats are dependent on CONFIG_DEBUG_VM.
inactive_ratio - VM internal parameter. (see mm/page_alloc.c)
recent_rotated_anon - VM internal parameter. (see mm/vmscan.c)
@@ -323,24 +421,37 @@ recent_scanned_anon - VM internal parameter. (see mm/vmscan.c)
recent_scanned_file - VM internal parameter. (see mm/vmscan.c)
Memo:
- recent_rotated means recent frequency of lru rotation.
- recent_scanned means recent # of scans to lru.
+ recent_rotated means recent frequency of LRU rotation.
+ recent_scanned means recent # of scans to LRU.
showing for better debug please see the code for meanings.
Note:
Only anonymous and swap cache memory is listed as part of 'rss' stat.
This should not be confused with the true 'resident set size' or the
- amount of physical memory used by the cgroup. Per-cgroup rss
- accounting is not done yet.
+ amount of physical memory used by the cgroup.
+ 'rss + file_mapped" will give you resident set size of cgroup.
+ (Note: file and shmem may be shared among other cgroups. In that case,
+ file_mapped is accounted only when the memory cgroup is owner of page
+ cache.)
5.3 swappiness
- Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
- Following cgroups' swapiness can't be changed.
- - root cgroup (uses /proc/sys/vm/swappiness).
- - a cgroup which uses hierarchy and it has child cgroup.
- - a cgroup which uses hierarchy and not the root of hierarchy.
+Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
+
+Following cgroups' swappiness can't be changed.
+- root cgroup (uses /proc/sys/vm/swappiness).
+- a cgroup which uses hierarchy and it has other cgroup(s) below it.
+- a cgroup which uses hierarchy and not the root of hierarchy.
+
+5.4 failcnt
+A memory cgroup provides memory.failcnt and memory.memsw.failcnt files.
+This failcnt(== failure count) shows the number of times that a usage counter
+hit its limit. When a memory cgroup hits a limit, failcnt increases and
+memory under it will be reclaimed.
+
+You can reset failcnt by writing 0 to failcnt file.
+# echo 0 > .../memory.failcnt
6. Hierarchy support
@@ -359,13 +470,13 @@ hierarchy
In the diagram above, with hierarchical accounting enabled, all memory
usage of e, is accounted to its ancestors up until the root (i.e, c and root),
-that has memory.use_hierarchy enabled. If one of the ancestors goes over its
+that has memory.use_hierarchy enabled. If one of the ancestors goes over its
limit, the reclaim algorithm reclaims from the tasks in the ancestor and the
children of the ancestor.
6.1 Enabling hierarchical accounting and reclaim
-The memory controller by default disables the hierarchy feature. Support
+A memory cgroup by default disables the hierarchy feature. Support
can be enabled by writing 1 to memory.use_hierarchy file of the root cgroup
# echo 1 > memory.use_hierarchy
@@ -375,9 +486,10 @@ The feature can be disabled by
# echo 0 > memory.use_hierarchy
NOTE1: Enabling/disabling will fail if the cgroup already has other
-cgroups created below it.
+ cgroups created below it.
-NOTE2: This feature can be enabled/disabled per subtree.
+NOTE2: When panic_on_oom is set to "2", the whole system will panic in
+ case of an OOM event in any cgroup.
7. Soft limits
@@ -387,7 +499,7 @@ is to allow control groups to use as much of the memory as needed, provided
a. There is no memory contention
b. They do not exceed their hard limit
-When the system detects memory contention or low memory control groups
+When the system detects memory contention or low memory, control groups
are pushed back to their soft limits. If the soft limit of each control
group is very high, they are pushed back as much as possible to make
sure that one control group does not starve the others of memory.
@@ -401,7 +513,7 @@ it gets invoked from balance_pgdat (kswapd).
7.1 Interface
Soft limits can be setup by using the following commands (in this example we
-assume a soft limit of 256 megabytes)
+assume a soft limit of 256 MiB)
# echo 256M > memory.soft_limit_in_bytes
@@ -414,7 +526,121 @@ NOTE1: Soft limits take effect over a long period of time, since they involve
NOTE2: It is recommended to set the soft limit always below the hard limit,
otherwise the hard limit will take precedence.
-8. TODO
+8. Move charges at task migration
+
+Users can move charges associated with a task along with task migration, that
+is, uncharge task's pages from the old cgroup and charge them to the new cgroup.
+This feature is not supported in !CONFIG_MMU environments because of lack of
+page tables.
+
+8.1 Interface
+
+This feature is disabled by default. It can be enabled(and disabled again) by
+writing to memory.move_charge_at_immigrate of the destination cgroup.
+
+If you want to enable it:
+
+# echo (some positive value) > memory.move_charge_at_immigrate
+
+Note: Each bits of move_charge_at_immigrate has its own meaning about what type
+ of charges should be moved. See 8.2 for details.
+Note: Charges are moved only when you move mm->owner, IOW, a leader of a thread
+ group.
+Note: If we cannot find enough space for the task in the destination cgroup, we
+ try to make space by reclaiming memory. Task migration may fail if we
+ cannot make enough space.
+Note: It can take several seconds if you move charges much.
+
+And if you want disable it again:
+
+# echo 0 > memory.move_charge_at_immigrate
+
+8.2 Type of charges which can be move
+
+Each bits of move_charge_at_immigrate has its own meaning about what type of
+charges should be moved. But in any cases, it must be noted that an account of
+a page or a swap can be moved only when it is charged to the task's current(old)
+memory cgroup.
+
+ bit | what type of charges would be moved ?
+ -----+------------------------------------------------------------------------
+ 0 | A charge of an anonymous page(or swap of it) used by the target task.
+ | Those pages and swaps must be used only by the target task. You must
+ | enable Swap Extension(see 2.4) to enable move of swap charges.
+ -----+------------------------------------------------------------------------
+ 1 | A charge of file pages(normal file, tmpfs file(e.g. ipc shared memory)
+ | and swaps of tmpfs file) mmapped by the target task. Unlike the case of
+ | anonymous pages, file pages(and swaps) in the range mmapped by the task
+ | will be moved even if the task hasn't done page fault, i.e. they might
+ | not be the task's "RSS", but other task's "RSS" that maps the same file.
+ | And mapcount of the page is ignored(the page can be moved even if
+ | page_mapcount(page) > 1). You must enable Swap Extension(see 2.4) to
+ | enable move of swap charges.
+
+8.3 TODO
+
+- Implement madvise(2) to let users decide the vma to be moved or not to be
+ moved.
+- All of moving charge operations are done under cgroup_mutex. It's not good
+ behavior to hold the mutex too long, so we may need some trick.
+
+9. Memory thresholds
+
+Memory cgroup implements memory thresholds using cgroups notification
+API (see cgroups.txt). It allows to register multiple memory and memsw
+thresholds and gets notifications when it crosses.
+
+To register a threshold application need:
+- create an eventfd using eventfd(2);
+- open memory.usage_in_bytes or memory.memsw.usage_in_bytes;
+- write string like "<event_fd> <fd of memory.usage_in_bytes> <threshold>" to
+ cgroup.event_control.
+
+Application will be notified through eventfd when memory usage crosses
+threshold in any direction.
+
+It's applicable for root and non-root cgroup.
+
+10. OOM Control
+
+memory.oom_control file is for OOM notification and other controls.
+
+Memory cgroup implements OOM notifier using cgroup notification
+API (See cgroups.txt). It allows to register multiple OOM notification
+delivery and gets notification when OOM happens.
+
+To register a notifier, application need:
+ - create an eventfd using eventfd(2)
+ - open memory.oom_control file
+ - write string like "<event_fd> <fd of memory.oom_control>" to
+ cgroup.event_control
+
+Application will be notified through eventfd when OOM happens.
+OOM notification doesn't work for root cgroup.
+
+You can disable OOM-killer by writing "1" to memory.oom_control file, as:
+
+ #echo 1 > memory.oom_control
+
+This operation is only allowed to the top cgroup of sub-hierarchy.
+If OOM-killer is disabled, tasks under cgroup will hang/sleep
+in memory cgroup's OOM-waitqueue when they request accountable memory.
+
+For running them, you have to relax the memory cgroup's OOM status by
+ * enlarge limit or reduce usage.
+To reduce usage,
+ * kill some tasks.
+ * move some tasks to other group with account migration.
+ * remove some files (on tmpfs?)
+
+Then, stopped tasks will work again.
+
+At reading, current status of OOM is shown.
+ oom_kill_disable 0 or 1 (if 1, oom-killer is disabled)
+ under_oom 0 or 1 (if 1, the memory cgroup is under OOM, tasks may
+ be stopped.)
+
+11. TODO
1. Add support for accounting huge pages (as a separate controller)
2. Make per-cgroup scanner reclaim not-shared pages first
diff --git a/Documentation/circular-buffers.txt b/Documentation/circular-buffers.txt
new file mode 100644
index 00000000000..8117e5bf606
--- /dev/null
+++ b/Documentation/circular-buffers.txt
@@ -0,0 +1,234 @@
+ ================
+ CIRCULAR BUFFERS
+ ================
+
+By: David Howells <dhowells@redhat.com>
+ Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+
+Linux provides a number of features that can be used to implement circular
+buffering. There are two sets of such features:
+
+ (1) Convenience functions for determining information about power-of-2 sized
+ buffers.
+
+ (2) Memory barriers for when the producer and the consumer of objects in the
+ buffer don't want to share a lock.
+
+To use these facilities, as discussed below, there needs to be just one
+producer and just one consumer. It is possible to handle multiple producers by
+serialising them, and to handle multiple consumers by serialising them.
+
+
+Contents:
+
+ (*) What is a circular buffer?
+
+ (*) Measuring power-of-2 buffers.
+
+ (*) Using memory barriers with circular buffers.
+ - The producer.
+ - The consumer.
+
+
+==========================
+WHAT IS A CIRCULAR BUFFER?
+==========================
+
+First of all, what is a circular buffer? A circular buffer is a buffer of
+fixed, finite size into which there are two indices:
+
+ (1) A 'head' index - the point at which the producer inserts items into the
+ buffer.
+
+ (2) A 'tail' index - the point at which the consumer finds the next item in
+ the buffer.
+
+Typically when the tail pointer is equal to the head pointer, the buffer is
+empty; and the buffer is full when the head pointer is one less than the tail
+pointer.
+
+The head index is incremented when items are added, and the tail index when
+items are removed. The tail index should never jump the head index, and both
+indices should be wrapped to 0 when they reach the end of the buffer, thus
+allowing an infinite amount of data to flow through the buffer.
+
+Typically, items will all be of the same unit size, but this isn't strictly
+required to use the techniques below. The indices can be increased by more
+than 1 if multiple items or variable-sized items are to be included in the
+buffer, provided that neither index overtakes the other. The implementer must
+be careful, however, as a region more than one unit in size may wrap the end of
+the buffer and be broken into two segments.
+
+
+============================
+MEASURING POWER-OF-2 BUFFERS
+============================
+
+Calculation of the occupancy or the remaining capacity of an arbitrarily sized
+circular buffer would normally be a slow operation, requiring the use of a
+modulus (divide) instruction. However, if the buffer is of a power-of-2 size,
+then a much quicker bitwise-AND instruction can be used instead.
+
+Linux provides a set of macros for handling power-of-2 circular buffers. These
+can be made use of by:
+
+ #include <linux/circ_buf.h>
+
+The macros are:
+
+ (*) Measure the remaining capacity of a buffer:
+
+ CIRC_SPACE(head_index, tail_index, buffer_size);
+
+ This returns the amount of space left in the buffer[1] into which items
+ can be inserted.
+
+
+ (*) Measure the maximum consecutive immediate space in a buffer:
+
+ CIRC_SPACE_TO_END(head_index, tail_index, buffer_size);
+
+ This returns the amount of consecutive space left in the buffer[1] into
+ which items can be immediately inserted without having to wrap back to the
+ beginning of the buffer.
+
+
+ (*) Measure the occupancy of a buffer:
+
+ CIRC_CNT(head_index, tail_index, buffer_size);
+
+ This returns the number of items currently occupying a buffer[2].
+
+
+ (*) Measure the non-wrapping occupancy of a buffer:
+
+ CIRC_CNT_TO_END(head_index, tail_index, buffer_size);
+
+ This returns the number of consecutive items[2] that can be extracted from
+ the buffer without having to wrap back to the beginning of the buffer.
+
+
+Each of these macros will nominally return a value between 0 and buffer_size-1,
+however:
+
+ [1] CIRC_SPACE*() are intended to be used in the producer. To the producer
+ they will return a lower bound as the producer controls the head index,
+ but the consumer may still be depleting the buffer on another CPU and
+ moving the tail index.
+
+ To the consumer it will show an upper bound as the producer may be busy
+ depleting the space.
+
+ [2] CIRC_CNT*() are intended to be used in the consumer. To the consumer they
+ will return a lower bound as the consumer controls the tail index, but the
+ producer may still be filling the buffer on another CPU and moving the
+ head index.
+
+ To the producer it will show an upper bound as the consumer may be busy
+ emptying the buffer.
+
+ [3] To a third party, the order in which the writes to the indices by the
+ producer and consumer become visible cannot be guaranteed as they are
+ independent and may be made on different CPUs - so the result in such a
+ situation will merely be a guess, and may even be negative.
+
+
+===========================================
+USING MEMORY BARRIERS WITH CIRCULAR BUFFERS
+===========================================
+
+By using memory barriers in conjunction with circular buffers, you can avoid
+the need to:
+
+ (1) use a single lock to govern access to both ends of the buffer, thus
+ allowing the buffer to be filled and emptied at the same time; and
+
+ (2) use atomic counter operations.
+
+There are two sides to this: the producer that fills the buffer, and the
+consumer that empties it. Only one thing should be filling a buffer at any one
+time, and only one thing should be emptying a buffer at any one time, but the
+two sides can operate simultaneously.
+
+
+THE PRODUCER
+------------
+
+The producer will look something like this:
+
+ spin_lock(&producer_lock);
+
+ unsigned long head = buffer->head;
+ unsigned long tail = ACCESS_ONCE(buffer->tail);
+
+ if (CIRC_SPACE(head, tail, buffer->size) >= 1) {
+ /* insert one item into the buffer */
+ struct item *item = buffer[head];
+
+ produce_item(item);
+
+ smp_wmb(); /* commit the item before incrementing the head */
+
+ buffer->head = (head + 1) & (buffer->size - 1);
+
+ /* wake_up() will make sure that the head is committed before
+ * waking anyone up */
+ wake_up(consumer);
+ }
+
+ spin_unlock(&producer_lock);
+
+This will instruct the CPU that the contents of the new item must be written
+before the head index makes it available to the consumer and then instructs the
+CPU that the revised head index must be written before the consumer is woken.
+
+Note that wake_up() doesn't have to be the exact mechanism used, but whatever
+is used must guarantee a (write) memory barrier between the update of the head
+index and the change of state of the consumer, if a change of state occurs.
+
+
+THE CONSUMER
+------------
+
+The consumer will look something like this:
+
+ spin_lock(&consumer_lock);
+
+ unsigned long head = ACCESS_ONCE(buffer->head);
+ unsigned long tail = buffer->tail;
+
+ if (CIRC_CNT(head, tail, buffer->size) >= 1) {
+ /* read index before reading contents at that index */
+ smp_read_barrier_depends();
+
+ /* extract one item from the buffer */
+ struct item *item = buffer[tail];
+
+ consume_item(item);
+
+ smp_mb(); /* finish reading descriptor before incrementing tail */
+
+ buffer->tail = (tail + 1) & (buffer->size - 1);
+ }
+
+ spin_unlock(&consumer_lock);
+
+This will instruct the CPU to make sure the index is up to date before reading
+the new item, and then it shall make sure the CPU has finished reading the item
+before it writes the new tail pointer, which will erase the item.
+
+
+Note the use of ACCESS_ONCE() in both algorithms to read the opposition index.
+This prevents the compiler from discarding and reloading its cached value -
+which some compilers will do across smp_read_barrier_depends(). This isn't
+strictly needed if you can be sure that the opposition index will _only_ be
+used the once.
+
+
+===============
+FURTHER READING
+===============
+
+See also Documentation/memory-barriers.txt for a description of Linux's memory
+barrier facilities.
diff --git a/Documentation/connector/cn_test.c b/Documentation/connector/cn_test.c
index b07add3467f..7764594778d 100644
--- a/Documentation/connector/cn_test.c
+++ b/Documentation/connector/cn_test.c
@@ -25,6 +25,7 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <linux/timer.h>
#include <linux/connector.h>
diff --git a/Documentation/connector/connector.txt b/Documentation/connector/connector.txt
index 78c9466a9aa..e5c5f5e6ab7 100644
--- a/Documentation/connector/connector.txt
+++ b/Documentation/connector/connector.txt
@@ -88,7 +88,7 @@ int cn_netlink_send(struct cn_msg *msg, u32 __groups, int gfp_mask);
int gfp_mask - GFP mask.
Note: When registering new callback user, connector core assigns
- netlink group to the user which is equal to it's id.idx.
+ netlink group to the user which is equal to its id.idx.
/*****************************************/
Protocol description.
diff --git a/Documentation/console/console.txt b/Documentation/console/console.txt
index 877a1b26cc3..926cf1b5e63 100644
--- a/Documentation/console/console.txt
+++ b/Documentation/console/console.txt
@@ -74,7 +74,7 @@ driver takes over the consoles vacated by the driver. Binding, on the other
hand, will bind the driver to the consoles that are currently occupied by a
system driver.
-NOTE1: Binding and binding must be selected in Kconfig. It's under:
+NOTE1: Binding and unbinding must be selected in Kconfig. It's under:
Device Drivers -> Character devices -> Support for binding and unbinding
console drivers
diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt
index aed082f49d0..737988fca64 100644
--- a/Documentation/cpu-freq/governors.txt
+++ b/Documentation/cpu-freq/governors.txt
@@ -145,8 +145,8 @@ show_sampling_rate_max: THIS INTERFACE IS DEPRECATED, DON'T USE IT.
up_threshold: defines what the average CPU usage between the samplings
of 'sampling_rate' needs to be for the kernel to make a decision on
whether it should increase the frequency. For example when it is set
-to its default value of '80' it means that between the checking
-intervals the CPU needs to be on average more than 80% in use to then
+to its default value of '95' it means that between the checking
+intervals the CPU needs to be on average more than 95% in use to then
decide that the CPU frequency needs to be increased.
ignore_nice_load: this parameter takes a value of '0' or '1'. When
diff --git a/Documentation/cpu-freq/pcc-cpufreq.txt b/Documentation/cpu-freq/pcc-cpufreq.txt
new file mode 100644
index 00000000000..9e3c3b33514
--- /dev/null
+++ b/Documentation/cpu-freq/pcc-cpufreq.txt
@@ -0,0 +1,207 @@
+/*
+ * pcc-cpufreq.txt - PCC interface documentation
+ *
+ * Copyright (C) 2009 Red Hat, Matthew Garrett <mjg@redhat.com>
+ * Copyright (C) 2009 Hewlett-Packard Development Company, L.P.
+ * Nagananda Chumbalkar <nagananda.chumbalkar@hp.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or NON
+ * INFRINGEMENT. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+
+ Processor Clocking Control Driver
+ ---------------------------------
+
+Contents:
+---------
+1. Introduction
+1.1 PCC interface
+1.1.1 Get Average Frequency
+1.1.2 Set Desired Frequency
+1.2 Platforms affected
+2. Driver and /sys details
+2.1 scaling_available_frequencies
+2.2 cpuinfo_transition_latency
+2.3 cpuinfo_cur_freq
+2.4 related_cpus
+3. Caveats
+
+1. Introduction:
+----------------
+Processor Clocking Control (PCC) is an interface between the platform
+firmware and OSPM. It is a mechanism for coordinating processor
+performance (ie: frequency) between the platform firmware and the OS.
+
+The PCC driver (pcc-cpufreq) allows OSPM to take advantage of the PCC
+interface.
+
+OS utilizes the PCC interface to inform platform firmware what frequency the
+OS wants for a logical processor. The platform firmware attempts to achieve
+the requested frequency. If the request for the target frequency could not be
+satisfied by platform firmware, then it usually means that power budget
+conditions are in place, and "power capping" is taking place.
+
+1.1 PCC interface:
+------------------
+The complete PCC specification is available here:
+http://www.acpica.org/download/Processor-Clocking-Control-v1p0.pdf
+
+PCC relies on a shared memory region that provides a channel for communication
+between the OS and platform firmware. PCC also implements a "doorbell" that
+is used by the OS to inform the platform firmware that a command has been
+sent.
+
+The ACPI PCCH() method is used to discover the location of the PCC shared
+memory region. The shared memory region header contains the "command" and
+"status" interface. PCCH() also contains details on how to access the platform
+doorbell.
+
+The following commands are supported by the PCC interface:
+* Get Average Frequency
+* Set Desired Frequency
+
+The ACPI PCCP() method is implemented for each logical processor and is
+used to discover the offsets for the input and output buffers in the shared
+memory region.
+
+When PCC mode is enabled, the platform will not expose processor performance
+or throttle states (_PSS, _TSS and related ACPI objects) to OSPM. Therefore,
+the native P-state driver (such as acpi-cpufreq for Intel, powernow-k8 for
+AMD) will not load.
+
+However, OSPM remains in control of policy. The governor (eg: "ondemand")
+computes the required performance for each processor based on server workload.
+The PCC driver fills in the command interface, and the input buffer and
+communicates the request to the platform firmware. The platform firmware is
+responsible for delivering the requested performance.
+
+Each PCC command is "global" in scope and can affect all the logical CPUs in
+the system. Therefore, PCC is capable of performing "group" updates. With PCC
+the OS is capable of getting/setting the frequency of all the logical CPUs in
+the system with a single call to the BIOS.
+
+1.1.1 Get Average Frequency:
+----------------------------
+This command is used by the OSPM to query the running frequency of the
+processor since the last time this command was completed. The output buffer
+indicates the average unhalted frequency of the logical processor expressed as
+a percentage of the nominal (ie: maximum) CPU frequency. The output buffer
+also signifies if the CPU frequency is limited by a power budget condition.
+
+1.1.2 Set Desired Frequency:
+----------------------------
+This command is used by the OSPM to communicate to the platform firmware the
+desired frequency for a logical processor. The output buffer is currently
+ignored by OSPM. The next invocation of "Get Average Frequency" will inform
+OSPM if the desired frequency was achieved or not.
+
+1.2 Platforms affected:
+-----------------------
+The PCC driver will load on any system where the platform firmware:
+* supports the PCC interface, and the associated PCCH() and PCCP() methods
+* assumes responsibility for managing the hardware clocking controls in order
+to deliver the requested processor performance
+
+Currently, certain HP ProLiant platforms implement the PCC interface. On those
+platforms PCC is the "default" choice.
+
+However, it is possible to disable this interface via a BIOS setting. In
+such an instance, as is also the case on platforms where the PCC interface
+is not implemented, the PCC driver will fail to load silently.
+
+2. Driver and /sys details:
+---------------------------
+When the driver loads, it merely prints the lowest and the highest CPU
+frequencies supported by the platform firmware.
+
+The PCC driver loads with a message such as:
+pcc-cpufreq: (v1.00.00) driver loaded with frequency limits: 1600 MHz, 2933
+MHz
+
+This means that the OPSM can request the CPU to run at any frequency in
+between the limits (1600 MHz, and 2933 MHz) specified in the message.
+
+Internally, there is no need for the driver to convert the "target" frequency
+to a corresponding P-state.
+
+The VERSION number for the driver will be of the format v.xy.ab.
+eg: 1.00.02
+ ----- --
+ | |
+ | -- this will increase with bug fixes/enhancements to the driver
+ |-- this is the version of the PCC specification the driver adheres to
+
+
+The following is a brief discussion on some of the fields exported via the
+/sys filesystem and how their values are affected by the PCC driver:
+
+2.1 scaling_available_frequencies:
+----------------------------------
+scaling_available_frequencies is not created in /sys. No intermediate
+frequencies need to be listed because the BIOS will try to achieve any
+frequency, within limits, requested by the governor. A frequency does not have
+to be strictly associated with a P-state.
+
+2.2 cpuinfo_transition_latency:
+-------------------------------
+The cpuinfo_transition_latency field is 0. The PCC specification does
+not include a field to expose this value currently.
+
+2.3 cpuinfo_cur_freq:
+---------------------
+A) Often cpuinfo_cur_freq will show a value different than what is declared
+in the scaling_available_frequencies or scaling_cur_freq, or scaling_max_freq.
+This is due to "turbo boost" available on recent Intel processors. If certain
+conditions are met the BIOS can achieve a slightly higher speed than requested
+by OSPM. An example:
+
+scaling_cur_freq : 2933000
+cpuinfo_cur_freq : 3196000
+
+B) There is a round-off error associated with the cpuinfo_cur_freq value.
+Since the driver obtains the current frequency as a "percentage" (%) of the
+nominal frequency from the BIOS, sometimes, the values displayed by
+scaling_cur_freq and cpuinfo_cur_freq may not match. An example:
+
+scaling_cur_freq : 1600000
+cpuinfo_cur_freq : 1583000
+
+In this example, the nominal frequency is 2933 MHz. The driver obtains the
+current frequency, cpuinfo_cur_freq, as 54% of the nominal frequency:
+
+ 54% of 2933 MHz = 1583 MHz
+
+Nominal frequency is the maximum frequency of the processor, and it usually
+corresponds to the frequency of the P0 P-state.
+
+2.4 related_cpus:
+-----------------
+The related_cpus field is identical to affected_cpus.
+
+affected_cpus : 4
+related_cpus : 4
+
+Currently, the PCC driver does not evaluate _PSD. The platforms that support
+PCC do not implement SW_ALL. So OSPM doesn't need to perform any coordination
+to ensure that the same frequency is requested of all dependent CPUs.
+
+3. Caveats:
+-----------
+The "cpufreq_stats" module in its present form cannot be loaded and
+expected to work with the PCC driver. Since the "cpufreq_stats" module
+provides information wrt each P-state, it is not applicable to the PCC driver.
diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt
index a99d7031cdf..45d5a217484 100644
--- a/Documentation/cpu-hotplug.txt
+++ b/Documentation/cpu-hotplug.txt
@@ -2,7 +2,7 @@
Maintainers:
CPU Hotplug Core:
- Rusty Russell <rusty@rustycorp.com.au>
+ Rusty Russell <rusty@rustcorp.com.au>
Srivatsa Vaddagiri <vatsa@in.ibm.com>
i386:
Zwane Mwaikambo <zwane@arm.linux.org.uk>
diff --git a/Documentation/credentials.txt b/Documentation/credentials.txt
index df03169782e..995baf379c0 100644
--- a/Documentation/credentials.txt
+++ b/Documentation/credentials.txt
@@ -408,9 +408,6 @@ This should be used inside the RCU read lock, as in the following example:
...
}
-A function need not get RCU read lock to use __task_cred() if it is holding a
-spinlock at the time as this implicitly holds the RCU read lock.
-
Should it be necessary to hold another task's credentials for a long period of
time, and possibly to sleep whilst doing so, then the caller should get a
reference on them using:
@@ -420,23 +417,25 @@ reference on them using:
This does all the RCU magic inside of it. The caller must call put_cred() on
the credentials so obtained when they're finished with.
+ [*] Note: The result of __task_cred() should not be passed directly to
+ get_cred() as this may race with commit_cred().
+
There are a couple of convenience functions to access bits of another task's
credentials, hiding the RCU magic from the caller:
uid_t task_uid(task) Task's real UID
uid_t task_euid(task) Task's effective UID
-If the caller is holding a spinlock or the RCU read lock at the time anyway,
-then:
+If the caller is holding the RCU read lock at the time anyway, then:
__task_cred(task)->uid
__task_cred(task)->euid
should be used instead. Similarly, if multiple aspects of a task's credentials
-need to be accessed, RCU read lock or a spinlock should be used, __task_cred()
-called, the result stored in a temporary pointer and then the credential
-aspects called from that before dropping the lock. This prevents the
-potentially expensive RCU magic from being invoked multiple times.
+need to be accessed, RCU read lock should be used, __task_cred() called, the
+result stored in a temporary pointer and then the credential aspects called
+from that before dropping the lock. This prevents the potentially expensive
+RCU magic from being invoked multiple times.
Should some other single aspect of another task's credentials need to be
accessed, then this can be used:
diff --git a/Documentation/development-process/2.Process b/Documentation/development-process/2.Process
index d750321acd5..97726eba610 100644
--- a/Documentation/development-process/2.Process
+++ b/Documentation/development-process/2.Process
@@ -151,7 +151,7 @@ The stages that a patch goes through are, generally:
well.
- Wider review. When the patch is getting close to ready for mainline
- inclusion, it will be accepted by a relevant subsystem maintainer -
+ inclusion, it should be accepted by a relevant subsystem maintainer -
though this acceptance is not a guarantee that the patch will make it
all the way to the mainline. The patch will show up in the maintainer's
subsystem tree and into the staging trees (described below). When the
@@ -159,6 +159,15 @@ The stages that a patch goes through are, generally:
the discovery of any problems resulting from the integration of this
patch with work being done by others.
+- Please note that most maintainers also have day jobs, so merging
+ your patch may not be their highest priority. If your patch is
+ getting feedback about changes that are needed, you should either
+ make those changes or justify why they should not be made. If your
+ patch has no review complaints but is not being merged by its
+ appropriate subsystem or driver maintainer, you should be persistent
+ in updating the patch to the current kernel so that it applies cleanly
+ and keep sending it for review and merging.
+
- Merging into the mainline. Eventually, a successful patch will be
merged into the mainline repository managed by Linus Torvalds. More
comments and/or problems may surface at this time; it is important that
@@ -258,12 +267,8 @@ an appropriate subsystem tree or be sent directly to Linus. In a typical
development cycle, approximately 10% of the patches going into the mainline
get there via -mm.
-The current -mm patch can always be found from the front page of
-
- http://kernel.org/
-
-Those who want to see the current state of -mm can get the "-mm of the
-moment" tree, found at:
+The current -mm patch is available in the "mmotm" (-mm of the moment)
+directory at:
http://userweb.kernel.org/~akpm/mmotm/
@@ -298,6 +303,12 @@ volatility of linux-next tends to make it a difficult development target.
See http://lwn.net/Articles/289013/ for more information on this topic, and
stay tuned; much is still in flux where linux-next is involved.
+Besides the mmotm and linux-next trees, the kernel source tree now contains
+the drivers/staging/ directory and many sub-directories for drivers or
+filesystems that are on their way to being added to the kernel tree
+proper, but they remain in drivers/staging/ while they still need more
+work.
+
2.5: TOOLS
@@ -319,9 +330,9 @@ developers; even if they do not use it for their own work, they'll need git
to keep up with what other developers (and the mainline) are doing.
Git is now packaged by almost all Linux distributions. There is a home
-page at
+page at:
- http://git.or.cz/
+ http://git-scm.com/
That page has pointers to documentation and tutorials. One should be
aware, in particular, of the Kernel Hacker's Guide to git, which has
diff --git a/Documentation/development-process/4.Coding b/Documentation/development-process/4.Coding
index a5a3450faaa..2278693c8ff 100644
--- a/Documentation/development-process/4.Coding
+++ b/Documentation/development-process/4.Coding
@@ -281,7 +281,7 @@ With sparse, the programmer can be warned about confusion between
user-space and kernel-space addresses, mixture of big-endian and
small-endian quantities, the passing of integer values where a set of bit
flags is expected, and so on. Sparse must be installed separately (it can
-be found at http://www.kernel.org/pub/software/devel/sparse/ if your
+be found at https://sparse.wiki.kernel.org/index.php/Main_Page if your
distributor does not package it); it can then be run on the code by adding
"C=1" to your make command.
diff --git a/Documentation/development-process/7.AdvancedTopics b/Documentation/development-process/7.AdvancedTopics
index a2cf74093aa..837179447e1 100644
--- a/Documentation/development-process/7.AdvancedTopics
+++ b/Documentation/development-process/7.AdvancedTopics
@@ -25,7 +25,7 @@ long document in its own right. Instead, the focus here will be on how git
fits into the kernel development process in particular. Developers who
wish to come up to speed with git will find more information at:
- http://git.or.cz/
+ http://git-scm.com/
http://www.kernel.org/pub/software/scm/git/docs/user-manual.html
diff --git a/Documentation/device-mapper/dm-crypt.txt b/Documentation/device-mapper/dm-crypt.txt
index 6680cab2c70..524de926290 100644
--- a/Documentation/device-mapper/dm-crypt.txt
+++ b/Documentation/device-mapper/dm-crypt.txt
@@ -36,7 +36,7 @@ Example scripts
===============
LUKS (Linux Unified Key Setup) is now the preferred way to set up disk
encryption with dm-crypt using the 'cryptsetup' utility, see
-http://luks.endorphin.org/
+http://clemens.endorphin.org/cryptography
[[
#!/bin/sh
diff --git a/Documentation/device-mapper/snapshot.txt b/Documentation/device-mapper/snapshot.txt
index e3a77b21513..0d5bc46dc16 100644
--- a/Documentation/device-mapper/snapshot.txt
+++ b/Documentation/device-mapper/snapshot.txt
@@ -122,3 +122,47 @@ volumeGroup-base: 0 2097152 snapshot-merge 254:11 254:12 P 16
brw------- 1 root root 254, 11 29 ago 18:15 /dev/mapper/volumeGroup-base-real
brw------- 1 root root 254, 12 29 ago 18:16 /dev/mapper/volumeGroup-base-cow
brw------- 1 root root 254, 10 29 ago 18:16 /dev/mapper/volumeGroup-base
+
+
+How to determine when a merging is complete
+===========================================
+The snapshot-merge and snapshot status lines end with:
+ <sectors_allocated>/<total_sectors> <metadata_sectors>
+
+Both <sectors_allocated> and <total_sectors> include both data and metadata.
+During merging, the number of sectors allocated gets smaller and
+smaller. Merging has finished when the number of sectors holding data
+is zero, in other words <sectors_allocated> == <metadata_sectors>.
+
+Here is a practical example (using a hybrid of lvm and dmsetup commands):
+
+# lvs
+ LV VG Attr LSize Origin Snap% Move Log Copy% Convert
+ base volumeGroup owi-a- 4.00g
+ snap volumeGroup swi-a- 1.00g base 18.97
+
+# dmsetup status volumeGroup-snap
+0 8388608 snapshot 397896/2097152 1560
+ ^^^^ metadata sectors
+
+# lvconvert --merge -b volumeGroup/snap
+ Merging of volume snap started.
+
+# lvs volumeGroup/snap
+ LV VG Attr LSize Origin Snap% Move Log Copy% Convert
+ base volumeGroup Owi-a- 4.00g 17.23
+
+# dmsetup status volumeGroup-base
+0 8388608 snapshot-merge 281688/2097152 1104
+
+# dmsetup status volumeGroup-base
+0 8388608 snapshot-merge 180480/2097152 712
+
+# dmsetup status volumeGroup-base
+0 8388608 snapshot-merge 16/2097152 16
+
+Merging has finished.
+
+# lvs
+ LV VG Attr LSize Origin Snap% Move Log Copy% Convert
+ base volumeGroup owi-a- 4.00g
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index 53d64d38234..d0d1df6cb5d 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -443,6 +443,9 @@ Your cooperation is appreciated.
231 = /dev/snapshot System memory snapshot device
232 = /dev/kvm Kernel-based virtual machine (hardware virtualization extensions)
233 = /dev/kmview View-OS A process with a view
+ 234 = /dev/btrfs-control Btrfs control device
+ 235 = /dev/autofs Autofs control device
+ 236 = /dev/mapper/control Device-Mapper control device
240-254 Reserved for local use
255 Reserved for MISC_DYNAMIC_MINOR
@@ -1515,7 +1518,7 @@ Your cooperation is appreciated.
...
The driver and documentation may be obtained from
- http://www.proximity.com.au/~brian/winradio/
+ http://www.winradio.com/
82 block I2O hard disk
0 = /dev/i2o/hdag 33rd I2O hard disk, whole disk
@@ -1721,7 +1724,7 @@ Your cooperation is appreciated.
1 = /dev/comedi1 Second comedi device
...
- See http://stm.lbl.gov/comedi or http://www.llp.fu-berlin.de/.
+ See http://stm.lbl.gov/comedi.
98 block User-mode virtual block device
0 = /dev/ubda First user-mode block device
@@ -1982,7 +1985,7 @@ Your cooperation is appreciated.
256 NetWare volumes can be supported in a single
machine.
- http://www.kernel.org/pub/linux/kernel/people/jmerkey/nwfs
+ http://cgfa.telepac.pt/ftp2/kernel.org/linux/kernel/people/jmerkey/nwfs/
0 = /dev/nwfs/v0 First NetWare (NWFS) Logical Volume
1 = /dev/nwfs/v1 Second NetWare (NWFS) Logical Volume
@@ -2589,7 +2592,8 @@ Your cooperation is appreciated.
1 = /dev/intermezzo1 Second cache manager
...
- See http://www.inter-mezzo.org/ for more information.
+ See http://web.archive.org/web/20080115195241/
+ http://inter-mezzo.org/index.html
186 char Object-based storage control device
0 = /dev/obd0 First obd control device
diff --git a/Documentation/dontdiff b/Documentation/dontdiff
index 3ad6acead94..d9bcffd5943 100644
--- a/Documentation/dontdiff
+++ b/Documentation/dontdiff
@@ -69,7 +69,6 @@ av_permissions.h
bbootsect
bin2c
binkernel.spec
-binoffset
bootsect
bounds.h
bsetup
diff --git a/Documentation/driver-model/platform.txt b/Documentation/driver-model/platform.txt
index 2e2c2ea90ce..41f41632ee5 100644
--- a/Documentation/driver-model/platform.txt
+++ b/Documentation/driver-model/platform.txt
@@ -192,7 +192,7 @@ command line. This will execute all matching early_param() callbacks.
User specified early platform devices will be registered at this point.
For the early serial console case the user can specify port on the
kernel command line as "earlyprintk=serial.0" where "earlyprintk" is
-the class string, "serial" is the name of the platfrom driver and
+the class string, "serial" is the name of the platform driver and
0 is the platform device id. If the id is -1 then the dot and the
id can be omitted.
diff --git a/Documentation/dvb/ci.txt b/Documentation/dvb/ci.txt
index 2ecd834585e..4a0c2b56e69 100644
--- a/Documentation/dvb/ci.txt
+++ b/Documentation/dvb/ci.txt
@@ -41,7 +41,7 @@ This application requires the following to function properly as of now.
* Cards that fall in this category
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-At present the cards that fall in this category are the Twinhan and it's
+At present the cards that fall in this category are the Twinhan and its
clones, these cards are available as VVMER, Tomato, Hercules, Orange and
so on.
diff --git a/Documentation/dvb/contributors.txt b/Documentation/dvb/contributors.txt
index 4865addebe1..47c30098dab 100644
--- a/Documentation/dvb/contributors.txt
+++ b/Documentation/dvb/contributors.txt
@@ -1,7 +1,7 @@
Thanks go to the following people for patches and contributions:
Michael Hunold <m.hunold@gmx.de>
- for the initial saa7146 driver and it's recent overhaul
+ for the initial saa7146 driver and its recent overhaul
Christian Theiss
for his work on the initial Linux DVB driver
diff --git a/Documentation/dvb/faq.txt b/Documentation/dvb/faq.txt
index 2511a335abd..121832e5d89 100644
--- a/Documentation/dvb/faq.txt
+++ b/Documentation/dvb/faq.txt
@@ -76,7 +76,7 @@ Some very frequently asked questions about linuxtv-dvb
the TuxBox CVS many interesting DVB applications and the dBox2
DVB source
- http://sourceforge.net/projects/dvbsak/
+ http://www.linuxtv.org/downloads/
DVB Swiss Army Knife library and utilities
http://www.nenie.org/misc/mpsys/
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index 14b7b5a3bcb..350959f4e41 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -26,7 +26,7 @@ use IO::Handle;
"dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
"or51211", "or51132_qam", "or51132_vsb", "bluebird",
"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718",
- "af9015");
+ "af9015", "ngene", "az6027");
# Check args
syntax() if (scalar(@ARGV) != 1);
@@ -39,7 +39,7 @@ for ($i=0; $i < scalar(@components); $i++) {
die $@ if $@;
print STDERR <<EOF;
Firmware(s) $outfile extracted successfully.
-Now copy it(they) to either /usr/lib/hotplug/firmware or /lib/firmware
+Now copy it(them) to either /usr/lib/hotplug/firmware or /lib/firmware
(depending on configuration of firmware hotplug).
EOF
exit(0);
@@ -518,11 +518,11 @@ sub bluebird {
sub af9015 {
my $sourcefile = "download.ashx?file=57";
my $url = "http://www.ite.com.tw/EN/Services/$sourcefile";
- my $hash = "ff5b096ed47c080870eacdab2de33ad6";
+ my $hash = "e3f08935158038d385ad382442f4bb2d";
my $outfile = "dvb-usb-af9015.fw";
my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
- my $fwoffset = 0x22708;
- my $fwlength = 18225;
+ my $fwoffset = 0x25690;
+ my $fwlength = 18725;
my ($chunklength, $buf, $rcount);
checkstandard();
@@ -549,6 +549,41 @@ sub af9015 {
close INFILE;
}
+sub ngene {
+ my $url = "http://www.digitaldevices.de/download/";
+ my $file1 = "ngene_15.fw";
+ my $hash1 = "d798d5a757121174f0dbc5f2833c0c85";
+ my $file2 = "ngene_17.fw";
+ my $hash2 = "26b687136e127b8ac24b81e0eeafc20b";
+
+ checkstandard();
+
+ wgetfile($file1, $url . $file1);
+ verify($file1, $hash1);
+
+ wgetfile($file2, $url . $file2);
+ verify($file2, $hash2);
+
+ "$file1, $file2";
+}
+
+sub az6027{
+ my $file = "AZ6027_Linux_Driver.tar.gz";
+ my $url = "http://linux.terratec.de/files/$file";
+ my $firmware = "dvb-usb-az6027-03.fw";
+
+ wgetfile($file, $url);
+
+ #untar
+ if( system("tar xzvf $file $firmware")){
+ die "failed to untar firmware";
+ }
+ if( system("rm $file")){
+ die ("unable to remove unnecessary files");
+ }
+
+ $firmware;
+}
# ---------------------------------------------------------------
# Utilities
@@ -667,6 +702,7 @@ sub delzero{
sub syntax() {
print STDERR "syntax: get_dvb_firmware <component>\n";
print STDERR "Supported components:\n";
+ @components = sort @components;
for($i=0; $i < scalar(@components); $i++) {
print STDERR "\t" . $components[$i] . "\n";
}
diff --git a/Documentation/edac.txt b/Documentation/edac.txt
index 79c53322376..0b875e8da96 100644
--- a/Documentation/edac.txt
+++ b/Documentation/edac.txt
@@ -6,6 +6,8 @@ Written by Doug Thompson <dougthompson@xmission.com>
7 Dec 2005
17 Jul 2007 Updated
+(c) Mauro Carvalho Chehab <mchehab@redhat.com>
+05 Aug 2009 Nehalem interface
EDAC is maintained and written by:
@@ -717,3 +719,153 @@ unique drivers for their hardware systems.
The 'test_device_edac' sample driver is located at the
bluesmoke.sourceforge.net project site for EDAC.
+=======================================================================
+NEHALEM USAGE OF EDAC APIs
+
+This chapter documents some EXPERIMENTAL mappings for EDAC API to handle
+Nehalem EDAC driver. They will likely be changed on future versions
+of the driver.
+
+Due to the way Nehalem exports Memory Controller data, some adjustments
+were done at i7core_edac driver. This chapter will cover those differences
+
+1) On Nehalem, there are one Memory Controller per Quick Patch Interconnect
+ (QPI). At the driver, the term "socket" means one QPI. This is
+ associated with a physical CPU socket.
+
+ Each MC have 3 physical read channels, 3 physical write channels and
+ 3 logic channels. The driver currenty sees it as just 3 channels.
+ Each channel can have up to 3 DIMMs.
+
+ The minimum known unity is DIMMs. There are no information about csrows.
+ As EDAC API maps the minimum unity is csrows, the driver sequencially
+ maps channel/dimm into different csrows.
+
+ For example, suposing the following layout:
+ Ch0 phy rd0, wr0 (0x063f4031): 2 ranks, UDIMMs
+ dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400
+ dimm 1 1024 Mb offset: 4, bank: 8, rank: 1, row: 0x4000, col: 0x400
+ Ch1 phy rd1, wr1 (0x063f4031): 2 ranks, UDIMMs
+ dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400
+ Ch2 phy rd3, wr3 (0x063f4031): 2 ranks, UDIMMs
+ dimm 0 1024 Mb offset: 0, bank: 8, rank: 1, row: 0x4000, col: 0x400
+ The driver will map it as:
+ csrow0: channel 0, dimm0
+ csrow1: channel 0, dimm1
+ csrow2: channel 1, dimm0
+ csrow3: channel 2, dimm0
+
+exports one
+ DIMM per csrow.
+
+ Each QPI is exported as a different memory controller.
+
+2) Nehalem MC has the hability to generate errors. The driver implements this
+ functionality via some error injection nodes:
+
+ For injecting a memory error, there are some sysfs nodes, under
+ /sys/devices/system/edac/mc/mc?/:
+
+ inject_addrmatch/*:
+ Controls the error injection mask register. It is possible to specify
+ several characteristics of the address to match an error code:
+ dimm = the affected dimm. Numbers are relative to a channel;
+ rank = the memory rank;
+ channel = the channel that will generate an error;
+ bank = the affected bank;
+ page = the page address;
+ column (or col) = the address column.
+ each of the above values can be set to "any" to match any valid value.
+
+ At driver init, all values are set to any.
+
+ For example, to generate an error at rank 1 of dimm 2, for any channel,
+ any bank, any page, any column:
+ echo 2 >/sys/devices/system/edac/mc/mc0/inject_addrmatch/dimm
+ echo 1 >/sys/devices/system/edac/mc/mc0/inject_addrmatch/rank
+
+ To return to the default behaviour of matching any, you can do:
+ echo any >/sys/devices/system/edac/mc/mc0/inject_addrmatch/dimm
+ echo any >/sys/devices/system/edac/mc/mc0/inject_addrmatch/rank
+
+ inject_eccmask:
+ specifies what bits will have troubles,
+
+ inject_section:
+ specifies what ECC cache section will get the error:
+ 3 for both
+ 2 for the highest
+ 1 for the lowest
+
+ inject_type:
+ specifies the type of error, being a combination of the following bits:
+ bit 0 - repeat
+ bit 1 - ecc
+ bit 2 - parity
+
+ inject_enable starts the error generation when something different
+ than 0 is written.
+
+ All inject vars can be read. root permission is needed for write.
+
+ Datasheet states that the error will only be generated after a write on an
+ address that matches inject_addrmatch. It seems, however, that reading will
+ also produce an error.
+
+ For example, the following code will generate an error for any write access
+ at socket 0, on any DIMM/address on channel 2:
+
+ echo 2 >/sys/devices/system/edac/mc/mc0/inject_addrmatch/channel
+ echo 2 >/sys/devices/system/edac/mc/mc0/inject_type
+ echo 64 >/sys/devices/system/edac/mc/mc0/inject_eccmask
+ echo 3 >/sys/devices/system/edac/mc/mc0/inject_section
+ echo 1 >/sys/devices/system/edac/mc/mc0/inject_enable
+ dd if=/dev/mem of=/dev/null seek=16k bs=4k count=1 >& /dev/null
+
+ For socket 1, it is needed to replace "mc0" by "mc1" at the above
+ commands.
+
+ The generated error message will look like:
+
+ EDAC MC0: UE row 0, channel-a= 0 channel-b= 0 labels "-": NON_FATAL (addr = 0x0075b980, socket=0, Dimm=0, Channel=2, syndrome=0x00000040, count=1, Err=8c0000400001009f:4000080482 (read error: read ECC error))
+
+3) Nehalem specific Corrected Error memory counters
+
+ Nehalem have some registers to count memory errors. The driver uses those
+ registers to report Corrected Errors on devices with Registered Dimms.
+
+ However, those counters don't work with Unregistered Dimms. As the chipset
+ offers some counters that also work with UDIMMS (but with a worse level of
+ granularity than the default ones), the driver exposes those registers for
+ UDIMM memories.
+
+ They can be read by looking at the contents of all_channel_counts/
+
+ $ for i in /sys/devices/system/edac/mc/mc0/all_channel_counts/*; do echo $i; cat $i; done
+ /sys/devices/system/edac/mc/mc0/all_channel_counts/udimm0
+ 0
+ /sys/devices/system/edac/mc/mc0/all_channel_counts/udimm1
+ 0
+ /sys/devices/system/edac/mc/mc0/all_channel_counts/udimm2
+ 0
+
+ What happens here is that errors on different csrows, but at the same
+ dimm number will increment the same counter.
+ So, in this memory mapping:
+ csrow0: channel 0, dimm0
+ csrow1: channel 0, dimm1
+ csrow2: channel 1, dimm0
+ csrow3: channel 2, dimm0
+ The hardware will increment udimm0 for an error at the first dimm at either
+ csrow0, csrow2 or csrow3;
+ The hardware will increment udimm1 for an error at the second dimm at either
+ csrow0, csrow2 or csrow3;
+ The hardware will increment udimm2 for an error at the third dimm at either
+ csrow0, csrow2 or csrow3;
+
+4) Standard error counters
+
+ The standard error counters are generated when an mcelog error is received
+ by the driver. Since, with udimm, this is counted by software, it is
+ possible that some errors could be lost. With rdimm's, they displays the
+ contents of the registers
diff --git a/Documentation/eisa.txt b/Documentation/eisa.txt
index 60e361ba08c..f297fc1202a 100644
--- a/Documentation/eisa.txt
+++ b/Documentation/eisa.txt
@@ -171,7 +171,7 @@ device.
virtual_root.force_probe :
Force the probing code to probe EISA slots even when it cannot find an
-EISA compliant mainboard (nothing appears on slot 0). Defaultd to 0
+EISA compliant mainboard (nothing appears on slot 0). Defaults to 0
(don't force), and set to 1 (force probing) when either
CONFIG_ALPHA_JENSEN or CONFIG_EISA_VLB_PRIMING are set.
diff --git a/Documentation/email-clients.txt b/Documentation/email-clients.txt
index a618efab7b1..945ff3fda43 100644
--- a/Documentation/email-clients.txt
+++ b/Documentation/email-clients.txt
@@ -216,26 +216,14 @@ Works. Use "Insert file..." or external editor.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Gmail (Web GUI)
-If you just have to use Gmail to send patches, it CAN be made to work. It
-requires a bit of external help, though.
-
-The first problem is that Gmail converts tabs to spaces. This will
-totally break your patches. To prevent this, you have to use a different
-editor. There is a firefox extension called "ViewSourceWith"
-(https://addons.mozilla.org/en-US/firefox/addon/394) which allows you to
-edit any text box in the editor of your choice. Configure it to launch
-your favorite editor. When you want to send a patch, use this technique.
-Once you have crafted your messsage + patch, save and exit the editor,
-which should reload the Gmail edit box. GMAIL WILL PRESERVE THE TABS.
-Hoorah. Apparently you can cut-n-paste literal tabs, but Gmail will
-convert those to spaces upon sending!
-
-The second problem is that Gmail converts tabs to spaces on replies. If
-you reply to a patch, don't expect to be able to apply it as a patch.
-
-The last problem is that Gmail will base64-encode any message that has a
-non-ASCII character. That includes things like European names. Be aware.
-
-Gmail is not convenient for lkml patches, but CAN be made to work.
+Does not work for sending patches.
+
+Gmail web client converts tabs to spaces automatically.
+
+At the same time it wraps lines every 78 chars with CRLF style line breaks
+although tab2space problem can be solved with external editor.
+
+Another problem is that Gmail will base64-encode any message that has a
+non-ASCII character. That includes things like European names.
###
diff --git a/Documentation/fault-injection/fault-injection.txt b/Documentation/fault-injection/fault-injection.txt
index 07930564079..7be15e44d48 100644
--- a/Documentation/fault-injection/fault-injection.txt
+++ b/Documentation/fault-injection/fault-injection.txt
@@ -143,8 +143,8 @@ o provide a way to configure fault attributes
failslab, fail_page_alloc, and fail_make_request use this way.
Helper functions:
- init_fault_attr_entries(entries, attr, name);
- void cleanup_fault_attr_entries(entries);
+ init_fault_attr_dentries(entries, attr, name);
+ void cleanup_fault_attr_dentries(entries);
- module parameters
diff --git a/Documentation/fault-injection/provoke-crashes.txt b/Documentation/fault-injection/provoke-crashes.txt
new file mode 100644
index 00000000000..7a9d3d81525
--- /dev/null
+++ b/Documentation/fault-injection/provoke-crashes.txt
@@ -0,0 +1,38 @@
+The lkdtm module provides an interface to crash or injure the kernel at
+predefined crashpoints to evaluate the reliability of crash dumps obtained
+using different dumping solutions. The module uses KPROBEs to instrument
+crashing points, but can also crash the kernel directly without KRPOBE
+support.
+
+
+You can provide the way either through module arguments when inserting
+the module, or through a debugfs interface.
+
+Usage: insmod lkdtm.ko [recur_count={>0}] cpoint_name=<> cpoint_type=<>
+ [cpoint_count={>0}]
+
+ recur_count : Recursion level for the stack overflow test. Default is 10.
+
+ cpoint_name : Crash point where the kernel is to be crashed. It can be
+ one of INT_HARDWARE_ENTRY, INT_HW_IRQ_EN, INT_TASKLET_ENTRY,
+ FS_DEVRW, MEM_SWAPOUT, TIMERADD, SCSI_DISPATCH_CMD,
+ IDE_CORE_CP, DIRECT
+
+ cpoint_type : Indicates the action to be taken on hitting the crash point.
+ It can be one of PANIC, BUG, EXCEPTION, LOOP, OVERFLOW,
+ CORRUPT_STACK, UNALIGNED_LOAD_STORE_WRITE, OVERWRITE_ALLOCATION,
+ WRITE_AFTER_FREE,
+
+ cpoint_count : Indicates the number of times the crash point is to be hit
+ to trigger an action. The default is 10.
+
+You can also induce failures by mounting debugfs and writing the type to
+<mountpoint>/provoke-crash/<crashpoint>. E.g.,
+
+ mount -t debugfs debugfs /mnt
+ echo EXCEPTION > /mnt/provoke-crash/INT_HARDWARE_ENTRY
+
+
+A special file is `DIRECT' which will induce the crash directly without
+KPROBE instrumentation. This mode is the only one available when the module
+is built on a kernel without KPROBEs support.
diff --git a/Documentation/fb/imacfb.txt b/Documentation/fb/efifb.txt
index 316ec9bb7de..a59916c29b3 100644
--- a/Documentation/fb/imacfb.txt
+++ b/Documentation/fb/efifb.txt
@@ -1,9 +1,9 @@
-What is imacfb?
+What is efifb?
===============
This is a generic EFI platform driver for Intel based Apple computers.
-Imacfb is only for EFI booted Intel Macs.
+efifb is only for EFI booted Intel Macs.
Supported Hardware
==================
@@ -16,16 +16,16 @@ MacMini
How to use it?
==============
-Imacfb does not have any kind of autodetection of your machine.
+efifb does not have any kind of autodetection of your machine.
You have to add the following kernel parameters in your elilo.conf:
Macbook :
- video=imacfb:macbook
+ video=efifb:macbook
MacMini :
- video=imacfb:mini
+ video=efifb:mini
Macbook Pro 15", iMac 17" :
- video=imacfb:i17
+ video=efifb:i17
Macbook Pro 17", iMac 20" :
- video=imacfb:i20
+ video=efifb:i20
--
Edgar Hucek <gimli@dark-green.com>
diff --git a/Documentation/fb/framebuffer.txt b/Documentation/fb/framebuffer.txt
index fe79e3c8847..58c5ae2e9f5 100644
--- a/Documentation/fb/framebuffer.txt
+++ b/Documentation/fb/framebuffer.txt
@@ -330,7 +330,7 @@ and on its mirrors.
The latest version of fbset can be found at
- http://home.tvd.be/cr26864/Linux/fbdev/
+ http://www.linux-fbdev.org/
10. Credits
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 0a46833c1b7..842aa9de84a 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -6,21 +6,6 @@ be removed from this file.
---------------------------
-What: USER_SCHED
-When: 2.6.34
-
-Why: USER_SCHED was implemented as a proof of concept for group scheduling.
- The effect of USER_SCHED can already be achieved from userspace with
- the help of libcgroup. The removal of USER_SCHED will also simplify
- the scheduler code with the removal of one major ifdef. There are also
- issues USER_SCHED has with USER_NS. A decision was taken not to fix
- those and instead remove USER_SCHED. Also new group scheduling
- features will not be implemented for USER_SCHED.
-
-Who: Dhaval Giani <dhaval@linux.vnet.ibm.com>
-
----------------------------
-
What: PRISM54
When: 2.6.34
@@ -64,6 +49,17 @@ Who: Robin Getz <rgetz@blackfin.uclinux.org> & Matt Mackall <mpm@selenic.com>
---------------------------
+What: Deprecated snapshot ioctls
+When: 2.6.36
+
+Why: The ioctls in kernel/power/user.c were marked as deprecated long time
+ ago. Now they notify users about that so that they need to replace
+ their userspace. After some more time, remove them completely.
+
+Who: Jiri Slaby <jirislaby@gmail.com>
+
+---------------------------
+
What: The ieee80211_regdom module parameter
When: March 2010 / desktop catchup
@@ -88,27 +84,6 @@ Who: Luis R. Rodriguez <lrodriguez@atheros.com>
---------------------------
-What: CONFIG_WIRELESS_OLD_REGULATORY - old static regulatory information
-When: March 2010 / desktop catchup
-
-Why: The old regulatory infrastructure has been replaced with a new one
- which does not require statically defined regulatory domains. We do
- not want to keep static regulatory domains in the kernel due to the
- the dynamic nature of regulatory law and localization. We kept around
- the old static definitions for the regulatory domains of:
-
- * US
- * JP
- * EU
-
- and used by default the US when CONFIG_WIRELESS_OLD_REGULATORY was
- set. We will remove this option once the standard Linux desktop catches
- up with the new userspace APIs we have implemented.
-
-Who: Luis R. Rodriguez <lrodriguez@atheros.com>
-
----------------------------
-
What: dev->power.power_state
When: July 2007
Why: Broken design for runtime control over driver power states, confusing
@@ -118,7 +93,7 @@ Why: Broken design for runtime control over driver power states, confusing
inputs. This framework was never widely used, and most attempts to
use it were broken. Drivers should instead be exposing domain-specific
interfaces either to kernel or to userspace.
-Who: Pavel Machek <pavel@suse.cz>
+Who: Pavel Machek <pavel@ucw.cz>
---------------------------
@@ -141,23 +116,6 @@ Who: Mauro Carvalho Chehab <mchehab@infradead.org>
---------------------------
-What: PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
-When: November 2005
-Files: drivers/pcmcia/: pcmcia_ioctl.c
-Why: With the 16-bit PCMCIA subsystem now behaving (almost) like a
- normal hotpluggable bus, and with it using the default kernel
- infrastructure (hotplug, driver core, sysfs) keeping the PCMCIA
- control ioctl needed by cardmgr and cardctl from pcmcia-cs is
- unnecessary, and makes further cleanups and integration of the
- PCMCIA subsystem into the Linux kernel device driver model more
- difficult. The features provided by cardmgr and cardctl are either
- handled by the kernel itself now or are available in the new
- pcmciautils package available at
- http://kernel.org/pub/linux/utils/kernel/pcmcia/
-Who: Dominik Brodowski <linux@brodo.de>
-
----------------------------
-
What: sys_sysctl
When: September 2010
Option: CONFIG_SYSCTL_SYSCALL
@@ -193,6 +151,31 @@ Who: Eric Biederman <ebiederm@xmission.com>
---------------------------
+What: /proc/<pid>/oom_adj
+When: August 2012
+Why: /proc/<pid>/oom_adj allows userspace to influence the oom killer's
+ badness heuristic used to determine which task to kill when the kernel
+ is out of memory.
+
+ The badness heuristic has since been rewritten since the introduction of
+ this tunable such that its meaning is deprecated. The value was
+ implemented as a bitshift on a score generated by the badness()
+ function that did not have any precise units of measure. With the
+ rewrite, the score is given as a proportion of available memory to the
+ task allocating pages, so using a bitshift which grows the score
+ exponentially is, thus, impossible to tune with fine granularity.
+
+ A much more powerful interface, /proc/<pid>/oom_score_adj, was
+ introduced with the oom killer rewrite that allows users to increase or
+ decrease the badness() score linearly. This interface will replace
+ /proc/<pid>/oom_adj.
+
+ A warning will be emitted to the kernel log if an application uses this
+ deprecated interface. After it is printed once, future warnings will be
+ suppressed until the kernel is rebooted.
+
+---------------------------
+
What: remove EXPORT_SYMBOL(kernel_thread)
When: August 2006
Files: arch/*/kernel/*_ksyms.c
@@ -260,16 +243,6 @@ Who: Thomas Gleixner <tglx@linutronix.de>
---------------------------
-What (Why):
- - xt_recent: the old ipt_recent proc dir
- (superseded by /proc/net/xt_recent)
-
-When: January 2009 or Linux 2.7.0, whichever comes first
-Why: Superseded by newer revisions or modules
-Who: Jan Engelhardt <jengelh@computergmbh.de>
-
----------------------------
-
What: GPIO autorequest on gpio_direction_{input,output}() in gpiolib
When: February 2010
Why: All callers should use explicit gpio_request()/gpio_free().
@@ -332,15 +305,6 @@ Who: Johannes Berg <johannes@sipsolutions.net>
---------------------------
-What: CONFIG_NF_CT_ACCT
-When: 2.6.29
-Why: Accounting can now be enabled/disabled without kernel recompilation.
- Currently used only to set a default value for a feature that is also
- controlled by a kernel/module/sysfs/sysctl parameter.
-Who: Krzysztof Piotr Oledzki <ole@ans.pl>
-
----------------------------
-
What: sysfs ui for changing p4-clockmod parameters
When: September 2009
Why: See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
@@ -396,24 +360,6 @@ When: 2.6.33
Why: Should be implemented in userspace, policy daemon.
Who: Johannes Berg <johannes@sipsolutions.net>
----------------------------
-
-What: CONFIG_INOTIFY
-When: 2.6.33
-Why: last user (audit) will be converted to the newer more generic
- and more easily maintained fsnotify subsystem
-Who: Eric Paris <eparis@redhat.com>
-
-----------------------------
-
-What: lock_policy_rwsem_* and unlock_policy_rwsem_* will not be
- exported interface anymore.
-When: 2.6.33
-Why: cpu_policy_rwsem has a new cleaner definition making it local to
- cpufreq core and contained inside cpufreq.c. Other dependent
- drivers should not use it in order to safely avoid lockdep issues.
-Who: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
-
----------------------------
What: sound-slot/service-* module aliases and related clutters in
@@ -468,12 +414,6 @@ Who: Alok N Kataria <akataria@vmware.com>
----------------------------
-What: adt7473 hardware monitoring driver
-When: February 2010
-Why: Obsoleted by the adt7475 driver.
-Who: Jean Delvare <khali@linux-fr.org>
-
----------------------------
What: Support for lcd_switch and display_get in asus-laptop driver
When: March 2010
Why: These two features use non-standard interfaces. There are the
@@ -494,51 +434,133 @@ Who: Corentin Chary <corentin.chary@gmail.com>
----------------------------
-What: usbvideo quickcam_messenger driver
-When: 2.6.35
-Files: drivers/media/video/usbvideo/quickcam_messenger.[ch]
-Why: obsolete v4l1 driver replaced by gspca_stv06xx
-Who: Hans de Goede <hdegoede@redhat.com>
+What: sysfs-class-rfkill state file
+When: Feb 2014
+Files: net/rfkill/core.c
+Why: Documented as obsolete since Feb 2010. This file is limited to 3
+ states while the rfkill drivers can have 4 states.
+Who: anybody or Florian Mickler <florian@mickler.org>
----------------------------
-What: ov511 v4l1 driver
-When: 2.6.35
-Files: drivers/media/video/ov511.[ch]
-Why: obsolete v4l1 driver replaced by gspca_ov519
-Who: Hans de Goede <hdegoede@redhat.com>
+What: sysfs-class-rfkill claim file
+When: Feb 2012
+Files: net/rfkill/core.c
+Why: It is not possible to claim an rfkill driver since 2007. This is
+ Documented as obsolete since Feb 2010.
+Who: anybody or Florian Mickler <florian@mickler.org>
----------------------------
-What: w9968cf v4l1 driver
-When: 2.6.35
-Files: drivers/media/video/w9968cf*.[ch]
-Why: obsolete v4l1 driver replaced by gspca_ov519
-Who: Hans de Goede <hdegoede@redhat.com>
+What: capifs
+When: February 2011
+Files: drivers/isdn/capi/capifs.*
+Why: udev fully replaces this special file system that only contains CAPI
+ NCCI TTY device nodes. User space (pppdcapiplugin) works without
+ noticing the difference.
+Who: Jan Kiszka <jan.kiszka@web.de>
----------------------------
-What: ovcamchip sensor framework
-When: 2.6.35
-Files: drivers/media/video/ovcamchip/*
-Why: Only used by obsoleted v4l1 drivers
-Who: Hans de Goede <hdegoede@redhat.com>
+What: KVM paravirt mmu host support
+When: January 2011
+Why: The paravirt mmu host support is slower than non-paravirt mmu, both
+ on newer and older hardware. It is already not exposed to the guest,
+ and kept only for live migration purposes.
+Who: Avi Kivity <avi@redhat.com>
----------------------------
-What: stv680 v4l1 driver
-When: 2.6.35
-Files: drivers/media/video/stv680.[ch]
-Why: obsolete v4l1 driver replaced by gspca_stv0680
-Who: Hans de Goede <hdegoede@redhat.com>
+What: iwlwifi 50XX module parameters
+When: 2.6.40
+Why: The "..50" modules parameters were used to configure 5000 series and
+ up devices; different set of module parameters also available for 4965
+ with same functionalities. Consolidate both set into single place
+ in drivers/net/wireless/iwlwifi/iwl-agn.c
+
+Who: Wey-Yi Guy <wey-yi.w.guy@intel.com>
----------------------------
-What: zc0301 v4l driver
+What: iwl4965 alias support
+When: 2.6.40
+Why: Internal alias support has been present in module-init-tools for some
+ time, the MODULE_ALIAS("iwl4965") boilerplate aliases can be removed
+ with no impact.
+
+Who: Wey-Yi Guy <wey-yi.w.guy@intel.com>
+
+---------------------------
+
+What: xt_NOTRACK
+Files: net/netfilter/xt_NOTRACK.c
+When: April 2011
+Why: Superseded by xt_CT
+Who: Netfilter developer team <netfilter-devel@vger.kernel.org>
+
+---------------------------
+
+What: video4linux /dev/vtx teletext API support
When: 2.6.35
-Files: drivers/media/video/zc0301/*
-Why: Duplicate functionality with the gspca_zc3xx driver, zc0301 only
- supports 2 USB-ID's (because it only supports a limited set of
- sensors) wich are also supported by the gspca_zc3xx driver
- (which supports 53 USB-ID's in total)
-Who: Hans de Goede <hdegoede@redhat.com>
+Files: drivers/media/video/saa5246a.c drivers/media/video/saa5249.c
+ include/linux/videotext.h
+Why: The vtx device nodes have been superseded by vbi device nodes
+ for many years. No applications exist that use the vtx support.
+ Of the two i2c drivers that actually support this API the saa5249
+ has been impossible to use for a year now and no known hardware
+ that supports this device exists. The saa5246a is theoretically
+ supported by the old mxb boards, but it never actually worked.
+
+ In summary: there is no hardware that can use this API and there
+ are no applications actually implementing this API.
+
+ The vtx support still reserves minors 192-223 and we would really
+ like to reuse those for upcoming new functionality. In the unlikely
+ event that new hardware appears that wants to use the functionality
+ provided by the vtx API, then that functionality should be build
+ around the sliced VBI API instead.
+Who: Hans Verkuil <hverkuil@xs4all.nl>
+
+----------------------------
+
+What: IRQF_DISABLED
+When: 2.6.36
+Why: The flag is a NOOP as we run interrupt handlers with interrupts disabled
+Who: Thomas Gleixner <tglx@linutronix.de>
+
+----------------------------
+
+What: old ieee1394 subsystem (CONFIG_IEEE1394)
+When: 2.6.37
+Files: drivers/ieee1394/ except init_ohci1394_dma.c
+Why: superseded by drivers/firewire/ (CONFIG_FIREWIRE) which offers more
+ features, better performance, and better security, all with smaller
+ and more modern code base
+Who: Stefan Richter <stefanr@s5r6.in-berlin.de>
+
+----------------------------
+
+What: The acpi_sleep=s4_nonvs command line option
+When: 2.6.37
+Files: arch/x86/kernel/acpi/sleep.c
+Why: superseded by acpi_sleep=nonvs
+Who: Rafael J. Wysocki <rjw@sisk.pl>
+
+----------------------------
+
+What: PCI DMA unmap state API
+When: August 2012
+Why: PCI DMA unmap state API (include/linux/pci-dma.h) was replaced
+ with DMA unmap state API (DMA unmap state API can be used for
+ any bus).
+Who: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
+
+----------------------------
+
+What: DMA_xxBIT_MASK macros
+When: Jun 2011
+Why: DMA_xxBIT_MASK macros were replaced with DMA_BIT_MASK() macros.
+Who: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
+
+----------------------------
+
diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX
index 875d49696b6..4303614b5ad 100644
--- a/Documentation/filesystems/00-INDEX
+++ b/Documentation/filesystems/00-INDEX
@@ -16,6 +16,8 @@ befs.txt
- information about the BeOS filesystem for Linux.
bfs.txt
- info for the SCO UnixWare Boot Filesystem (BFS).
+ceph.txt
+ - info for the Ceph Distributed File System
cifs.txt
- description of the CIFS filesystem.
coda.txt
@@ -32,6 +34,8 @@ dlmfs.txt
- info on the userspace interface to the OCFS2 DLM.
dnotify.txt
- info about directory notification in Linux.
+dnotify_test.c
+ - example program for dnotify
ecryptfs.txt
- docs on eCryptfs: stacked cryptographic filesystem for Linux.
exofs.txt
@@ -62,6 +66,8 @@ jfs.txt
- info and mount options for the JFS filesystem.
locks.txt
- info on file locking implementations, flock() vs. fcntl(), etc.
+logfs.txt
+ - info on the LogFS flash filesystem.
mandatory-locking.txt
- info on the Linux implementation of Sys V mandatory file locking.
ncpfs.txt
diff --git a/Documentation/filesystems/9p.txt b/Documentation/filesystems/9p.txt
index 57e0b80a527..f9765e8cf08 100644
--- a/Documentation/filesystems/9p.txt
+++ b/Documentation/filesystems/9p.txt
@@ -37,6 +37,15 @@ For Plan 9 From User Space applications (http://swtch.com/plan9)
mount -t 9p `namespace`/acme /mnt/9 -o trans=unix,uname=$USER
+For server running on QEMU host with virtio transport:
+
+ mount -t 9p -o trans=virtio <mount_tag> /mnt/9
+
+where mount_tag is the tag associated by the server to each of the exported
+mount points. Each 9P export is seen by the client as a virtio device with an
+associated "mount_tag" property. Available mount tags can be
+seen by reading /sys/bus/virtio/drivers/9pnet_virtio/virtio<n>/mount_tag files.
+
OPTIONS
=======
@@ -47,7 +56,7 @@ OPTIONS
fd - used passed file descriptors for connection
(see rfdno and wfdno)
virtio - connect to the next virtio channel available
- (from lguest or KVM with trans_virtio module)
+ (from QEMU with trans_virtio module)
rdma - connect to a specified RDMA channel
uname=name user name to attempt mount as on the remote server. The
@@ -85,7 +94,12 @@ OPTIONS
port=n port to connect to on the remote server
- noextend force legacy mode (no 9p2000.u semantics)
+ noextend force legacy mode (no 9p2000.u or 9p2000.L semantics)
+
+ version=name Select 9P protocol version. Valid options are:
+ 9p2000 - Legacy mode (same as noextend)
+ 9p2000.u - Use 9P2000.u protocol
+ 9p2000.L - Use 9P2000.L protocol
dfltuid attempt to mount as a particular uid
@@ -114,7 +128,7 @@ OPTIONS
RESOURCES
=========
-Our current recommendation is to use Inferno (http://www.vitanuova.com/inferno)
+Our current recommendation is to use Inferno (http://www.vitanuova.com/nferno/index.html)
as the 9p server. You can start a 9p server under Inferno by issuing the
following command:
; styxlisten -A tcp!*!564 export '#U*'
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index 18b9d0ca063..2db4283efa8 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -92,8 +92,8 @@ prototypes:
void (*destroy_inode)(struct inode *);
void (*dirty_inode) (struct inode *);
int (*write_inode) (struct inode *, int);
- void (*drop_inode) (struct inode *);
- void (*delete_inode) (struct inode *);
+ int (*drop_inode) (struct inode *);
+ void (*evict_inode) (struct inode *);
void (*put_super) (struct super_block *);
void (*write_super) (struct super_block *);
int (*sync_fs)(struct super_block *sb, int wait);
@@ -101,14 +101,13 @@ prototypes:
int (*unfreeze_fs) (struct super_block *);
int (*statfs) (struct dentry *, struct kstatfs *);
int (*remount_fs) (struct super_block *, int *, char *);
- void (*clear_inode) (struct inode *);
void (*umount_begin) (struct super_block *);
int (*show_options)(struct seq_file *, struct vfsmount *);
ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t);
ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t);
locking rules:
- All may block.
+ All may block [not true, see below]
None have BKL
s_umount
alloc_inode:
@@ -116,22 +115,25 @@ destroy_inode:
dirty_inode: (must not sleep)
write_inode:
drop_inode: !!!inode_lock!!!
-delete_inode:
+evict_inode:
put_super: write
write_super: read
sync_fs: read
freeze_fs: read
unfreeze_fs: read
-statfs: no
-remount_fs: maybe (see below)
-clear_inode:
+statfs: maybe(read) (see below)
+remount_fs: write
umount_begin: no
show_options: no (namespace_sem)
quota_read: no (see below)
quota_write: no (see below)
-->remount_fs() will have the s_umount exclusive lock if it's already mounted.
-When called from get_sb_single, it does NOT have the s_umount lock.
+->statfs() has s_umount (shared) when called by ustat(2) (native or
+compat), but that's an accident of bad API; s_umount is used to pin
+the superblock down when we only have dev_t given us by userland to
+identify the superblock. Everything else (statfs(), fstatfs(), etc.)
+doesn't hold it when calling ->statfs() - superblock is pinned down
+by resolving the pathname passed to syscall.
->quota_read() and ->quota_write() functions are both guaranteed to
be the only ones operating on the quota file by the quota code (via
dqio_sem) (unless an admin really wants to screw up something and
@@ -178,7 +180,7 @@ prototypes:
locking rules:
All except set_page_dirty may block
- BKL PageLocked(page) i_sem
+ BKL PageLocked(page) i_mutex
writepage: no yes, unlocks (see below)
readpage: no yes, unlocks
sync_page: no maybe
@@ -372,15 +374,13 @@ prototypes:
ssize_t (*aio_write) (struct kiocb *, const struct iovec *, unsigned long, loff_t);
int (*readdir) (struct file *, void *, filldir_t);
unsigned int (*poll) (struct file *, struct poll_table_struct *);
- int (*ioctl) (struct inode *, struct file *, unsigned int,
- unsigned long);
long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
int (*mmap) (struct file *, struct vm_area_struct *);
int (*open) (struct inode *, struct file *);
int (*flush) (struct file *);
int (*release) (struct inode *, struct file *);
- int (*fsync) (struct file *, struct dentry *, int datasync);
+ int (*fsync) (struct file *, int datasync);
int (*aio_fsync) (struct kiocb *, int datasync);
int (*fasync) (int, struct file *, int);
int (*lock) (struct file *, int, struct file_lock *);
@@ -407,8 +407,7 @@ write: no
aio_write: no
readdir: no
poll: no
-ioctl: yes (see below)
-unlocked_ioctl: no (see below)
+unlocked_ioctl: no
compat_ioctl: no
mmap: no
open: no
@@ -429,8 +428,9 @@ check_flags: no
implementations. If your fs is not using generic_file_llseek, you
need to acquire and release the appropriate locks in your ->llseek().
For many filesystems, it is probably safe to acquire the inode
-semaphore. Note some filesystems (i.e. remote ones) provide no
-protection for i_size so you will need to use the BKL.
+mutex or just to use i_size_read() instead.
+Note: this does not protect the file->f_pos against concurrent modifications
+since this is something the userspace has to take care about.
Note: ext2_release() was *the* source of contention on fs-intensive
loads and dropping BKL on ->release() helps to get rid of that (we still
@@ -450,9 +450,6 @@ move ->readdir() to inode_operations and use a separate method for directory
anything that resembles union-mount we won't have a struct file for all
components. And there are other reasons why the current interface is a mess...
-->ioctl() on regular files is superceded by the ->unlocked_ioctl() that
-doesn't take the BKL.
-
->read on directories probably must go away - we should just enforce -EISDIR
in sys_read() and friends.
@@ -460,13 +457,6 @@ in sys_read() and friends.
--------------------------- dquot_operations -------------------------------
prototypes:
- int (*initialize) (struct inode *, int);
- int (*drop) (struct inode *);
- int (*alloc_space) (struct inode *, qsize_t, int);
- int (*alloc_inode) (const struct inode *, unsigned long);
- int (*free_space) (struct inode *, qsize_t);
- int (*free_inode) (const struct inode *, unsigned long);
- int (*transfer) (struct inode *, struct iattr *);
int (*write_dquot) (struct dquot *);
int (*acquire_dquot) (struct dquot *);
int (*release_dquot) (struct dquot *);
@@ -479,13 +469,6 @@ a proper locking wrt the filesystem and call the generic quota operations.
What filesystem should expect from the generic quota functions:
FS recursion Held locks when called
-initialize: yes maybe dqonoff_sem
-drop: yes -
-alloc_space: ->mark_dirty() -
-alloc_inode: ->mark_dirty() -
-free_space: ->mark_dirty() -
-free_inode: ->mark_dirty() -
-transfer: yes -
write_dquot: yes dqonoff_sem or dqptr_sem
acquire_dquot: yes dqonoff_sem or dqptr_sem
release_dquot: yes dqonoff_sem or dqptr_sem
@@ -495,10 +478,6 @@ write_info: yes dqonoff_sem
FS recursion means calling ->quota_read() and ->quota_write() from superblock
operations.
-->alloc_space(), ->alloc_inode(), ->free_space(), ->free_inode() are called
-only directly by the filesystem and do not call any fs functions only
-the ->mark_dirty() operation.
-
More details about quota locking can be found in fs/dquot.c.
--------------------------- vm_operations_struct -----------------------------
diff --git a/Documentation/filesystems/Makefile b/Documentation/filesystems/Makefile
new file mode 100644
index 00000000000..a5dd114da14
--- /dev/null
+++ b/Documentation/filesystems/Makefile
@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := dnotify_test
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
diff --git a/Documentation/filesystems/affs.txt b/Documentation/filesystems/affs.txt
index 2d1524469c2..81ac488e375 100644
--- a/Documentation/filesystems/affs.txt
+++ b/Documentation/filesystems/affs.txt
@@ -216,4 +216,4 @@ due to an incompatibility with the Amiga floppy controller.
If you are interested in an Amiga Emulator for Linux, look at
-http://www.freiburg.linux.de/~uae/
+http://web.archive.org/web/*/http://www.freiburg.linux.de/~uae/
diff --git a/Documentation/filesystems/autofs4-mount-control.txt b/Documentation/filesystems/autofs4-mount-control.txt
index 8f78ded4b64..51986bf08a4 100644
--- a/Documentation/filesystems/autofs4-mount-control.txt
+++ b/Documentation/filesystems/autofs4-mount-control.txt
@@ -146,7 +146,7 @@ found to be inadequate, in this case. The Generic Netlink system was
used for this as raw Netlink would lead to a significant increase in
complexity. There's no question that the Generic Netlink system is an
elegant solution for common case ioctl functions but it's not a complete
-replacement probably because it's primary purpose in life is to be a
+replacement probably because its primary purpose in life is to be a
message bus implementation rather than specifically an ioctl replacement.
While it would be possible to work around this there is one concern
that lead to the decision to not use it. This is that the autofs
diff --git a/Documentation/filesystems/befs.txt b/Documentation/filesystems/befs.txt
index 67391a15949..6e49c363938 100644
--- a/Documentation/filesystems/befs.txt
+++ b/Documentation/filesystems/befs.txt
@@ -31,7 +31,7 @@ Current maintainer: Sergey S. Kostyliov <rathamahata@php4.ru>
WHAT IS THIS DRIVER?
==================
-This module implements the native filesystem of BeOS <http://www.be.com/>
+This module implements the native filesystem of BeOS http://www.beincorporated.com/
for the linux 2.4.1 and later kernels. Currently it is a read-only
implementation.
@@ -61,7 +61,7 @@ step 2. Configuration & make kernel
The linux kernel has many compile-time options. Most of them are beyond the
scope of this document. I suggest the Kernel-HOWTO document as a good general
-reference on this topic. <http://www.linux.com/howto/Kernel-HOWTO.html>
+reference on this topic. http://www.linuxdocs.org/HOWTOs/Kernel-HOWTO-4.html
However, to use the BeFS module, you must enable it at configure time.
diff --git a/Documentation/filesystems/caching/fscache.txt b/Documentation/filesystems/caching/fscache.txt
index a91e2e2095b..770267af5b3 100644
--- a/Documentation/filesystems/caching/fscache.txt
+++ b/Documentation/filesystems/caching/fscache.txt
@@ -343,8 +343,8 @@ This will look something like:
[root@andromeda ~]# head /proc/fs/fscache/objects
OBJECT PARENT STAT CHLDN OPS OOP IPR EX READS EM EV F S | NETFS_COOKIE_DEF TY FL NETFS_DATA OBJECT_KEY, AUX_DATA
======== ======== ==== ===== === === === == ===== == == = = | ================ == == ================ ================
- 17e4b 2 ACTV 0 0 0 0 0 0 7b 4 0 8 | NFS.fh DT 0 ffff88001dd82820 010006017edcf8bbc93b43298fdfbe71e50b57b13a172c0117f38472, e567634700000000000000000000000063f2404a000000000000000000000000c9030000000000000000000063f2404a
- 1693a 2 ACTV 0 0 0 0 0 0 7b 4 0 8 | NFS.fh DT 0 ffff88002db23380 010006017edcf8bbc93b43298fdfbe71e50b57b1e0162c01a2df0ea6, 420ebc4a000000000000000000000000420ebc4a0000000000000000000000000e1801000000000000000000420ebc4a
+ 17e4b 2 ACTV 0 0 0 0 0 0 7b 4 0 0 | NFS.fh DT 0 ffff88001dd82820 010006017edcf8bbc93b43298fdfbe71e50b57b13a172c0117f38472, e567634700000000000000000000000063f2404a000000000000000000000000c9030000000000000000000063f2404a
+ 1693a 2 ACTV 0 0 0 0 0 0 7b 4 0 0 | NFS.fh DT 0 ffff88002db23380 010006017edcf8bbc93b43298fdfbe71e50b57b1e0162c01a2df0ea6, 420ebc4a000000000000000000000000420ebc4a0000000000000000000000000e1801000000000000000000420ebc4a
where the first set of columns before the '|' describe the object:
@@ -362,7 +362,7 @@ where the first set of columns before the '|' describe the object:
EM Object's event mask
EV Events raised on this object
F Object flags
- S Object slow-work work item flags
+ S Object work item busy state mask (1:pending 2:running)
and the second set of columns describe the object's cookie, if present:
@@ -395,8 +395,8 @@ and the following paired letters:
w Show objects that don't have pending writes
R Show objects that have outstanding reads
r Show objects that don't have outstanding reads
- S Show objects that have slow work queued
- s Show objects that don't have slow work queued
+ S Show objects that have work queued
+ s Show objects that don't have work queued
If neither side of a letter pair is given, then both are implied. For example:
diff --git a/Documentation/filesystems/ceph.txt b/Documentation/filesystems/ceph.txt
new file mode 100644
index 00000000000..763d8ebbbeb
--- /dev/null
+++ b/Documentation/filesystems/ceph.txt
@@ -0,0 +1,140 @@
+Ceph Distributed File System
+============================
+
+Ceph is a distributed network file system designed to provide good
+performance, reliability, and scalability.
+
+Basic features include:
+
+ * POSIX semantics
+ * Seamless scaling from 1 to many thousands of nodes
+ * High availability and reliability. No single point of failure.
+ * N-way replication of data across storage nodes
+ * Fast recovery from node failures
+ * Automatic rebalancing of data on node addition/removal
+ * Easy deployment: most FS components are userspace daemons
+
+Also,
+ * Flexible snapshots (on any directory)
+ * Recursive accounting (nested files, directories, bytes)
+
+In contrast to cluster filesystems like GFS, OCFS2, and GPFS that rely
+on symmetric access by all clients to shared block devices, Ceph
+separates data and metadata management into independent server
+clusters, similar to Lustre. Unlike Lustre, however, metadata and
+storage nodes run entirely as user space daemons. Storage nodes
+utilize btrfs to store data objects, leveraging its advanced features
+(checksumming, metadata replication, etc.). File data is striped
+across storage nodes in large chunks to distribute workload and
+facilitate high throughputs. When storage nodes fail, data is
+re-replicated in a distributed fashion by the storage nodes themselves
+(with some minimal coordination from a cluster monitor), making the
+system extremely efficient and scalable.
+
+Metadata servers effectively form a large, consistent, distributed
+in-memory cache above the file namespace that is extremely scalable,
+dynamically redistributes metadata in response to workload changes,
+and can tolerate arbitrary (well, non-Byzantine) node failures. The
+metadata server takes a somewhat unconventional approach to metadata
+storage to significantly improve performance for common workloads. In
+particular, inodes with only a single link are embedded in
+directories, allowing entire directories of dentries and inodes to be
+loaded into its cache with a single I/O operation. The contents of
+extremely large directories can be fragmented and managed by
+independent metadata servers, allowing scalable concurrent access.
+
+The system offers automatic data rebalancing/migration when scaling
+from a small cluster of just a few nodes to many hundreds, without
+requiring an administrator carve the data set into static volumes or
+go through the tedious process of migrating data between servers.
+When the file system approaches full, new nodes can be easily added
+and things will "just work."
+
+Ceph includes flexible snapshot mechanism that allows a user to create
+a snapshot on any subdirectory (and its nested contents) in the
+system. Snapshot creation and deletion are as simple as 'mkdir
+.snap/foo' and 'rmdir .snap/foo'.
+
+Ceph also provides some recursive accounting on directories for nested
+files and bytes. That is, a 'getfattr -d foo' on any directory in the
+system will reveal the total number of nested regular files and
+subdirectories, and a summation of all nested file sizes. This makes
+the identification of large disk space consumers relatively quick, as
+no 'du' or similar recursive scan of the file system is required.
+
+
+Mount Syntax
+============
+
+The basic mount syntax is:
+
+ # mount -t ceph monip[:port][,monip2[:port]...]:/[subdir] mnt
+
+You only need to specify a single monitor, as the client will get the
+full list when it connects. (However, if the monitor you specify
+happens to be down, the mount won't succeed.) The port can be left
+off if the monitor is using the default. So if the monitor is at
+1.2.3.4,
+
+ # mount -t ceph 1.2.3.4:/ /mnt/ceph
+
+is sufficient. If /sbin/mount.ceph is installed, a hostname can be
+used instead of an IP address.
+
+
+
+Mount Options
+=============
+
+ ip=A.B.C.D[:N]
+ Specify the IP and/or port the client should bind to locally.
+ There is normally not much reason to do this. If the IP is not
+ specified, the client's IP address is determined by looking at the
+ address its connection to the monitor originates from.
+
+ wsize=X
+ Specify the maximum write size in bytes. By default there is no
+ maximum. Ceph will normally size writes based on the file stripe
+ size.
+
+ rsize=X
+ Specify the maximum readahead.
+
+ mount_timeout=X
+ Specify the timeout value for mount (in seconds), in the case
+ of a non-responsive Ceph file system. The default is 30
+ seconds.
+
+ rbytes
+ When stat() is called on a directory, set st_size to 'rbytes',
+ the summation of file sizes over all files nested beneath that
+ directory. This is the default.
+
+ norbytes
+ When stat() is called on a directory, set st_size to the
+ number of entries in that directory.
+
+ nocrc
+ Disable CRC32C calculation for data writes. If set, the storage node
+ must rely on TCP's error correction to detect data corruption
+ in the data payload.
+
+ noasyncreaddir
+ Disable client's use its local cache to satisfy readdir
+ requests. (This does not change correctness; the client uses
+ cached metadata only when a lease or capability ensures it is
+ valid.)
+
+
+More Information
+================
+
+For more information on Ceph, see the home page at
+ http://ceph.newdream.net/
+
+The Linux kernel client source tree is available at
+ git://ceph.newdream.net/git/ceph-client.git
+ git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
+
+and the source for the full system is at
+ git://ceph.newdream.net/git/ceph.git
diff --git a/Documentation/filesystems/dentry-locking.txt b/Documentation/filesystems/dentry-locking.txt
index 4c0c575a401..79334ed5daa 100644
--- a/Documentation/filesystems/dentry-locking.txt
+++ b/Documentation/filesystems/dentry-locking.txt
@@ -62,7 +62,8 @@ changes are :
2. Insertion of a dentry into the hash table is done using
hlist_add_head_rcu() which take care of ordering the writes - the
writes to the dentry must be visible before the dentry is
- inserted. This works in conjunction with hlist_for_each_rcu() while
+ inserted. This works in conjunction with hlist_for_each_rcu(),
+ which has since been replaced by hlist_for_each_entry_rcu(), while
walking the hash chain. The only requirement is that all
initialization to the dentry must be done before
hlist_add_head_rcu() since we don't have dcache_lock protection
diff --git a/Documentation/filesystems/dlmfs.txt b/Documentation/filesystems/dlmfs.txt
index c50bbb2d52b..1b528b2ad80 100644
--- a/Documentation/filesystems/dlmfs.txt
+++ b/Documentation/filesystems/dlmfs.txt
@@ -47,7 +47,7 @@ You'll want to start heartbeating on a volume which all the nodes in
your lockspace can access. The easiest way to do this is via
ocfs2_hb_ctl (distributed with ocfs2-tools). Right now it requires
that an OCFS2 file system be in place so that it can automatically
-find it's heartbeat area, though it will eventually support heartbeat
+find its heartbeat area, though it will eventually support heartbeat
against raw disks.
Please see the ocfs2_hb_ctl and mkfs.ocfs2 manual pages distributed
diff --git a/Documentation/filesystems/dnotify.txt b/Documentation/filesystems/dnotify.txt
index 9f5d338ddbb..6baf88f4685 100644
--- a/Documentation/filesystems/dnotify.txt
+++ b/Documentation/filesystems/dnotify.txt
@@ -62,38 +62,9 @@ disabled, fcntl(fd, F_NOTIFY, ...) will return -EINVAL.
Example
-------
+See Documentation/filesystems/dnotify_test.c for an example.
- #define _GNU_SOURCE /* needed to get the defines */
- #include <fcntl.h> /* in glibc 2.2 this has the needed
- values defined */
- #include <signal.h>
- #include <stdio.h>
- #include <unistd.h>
-
- static volatile int event_fd;
-
- static void handler(int sig, siginfo_t *si, void *data)
- {
- event_fd = si->si_fd;
- }
-
- int main(void)
- {
- struct sigaction act;
- int fd;
-
- act.sa_sigaction = handler;
- sigemptyset(&act.sa_mask);
- act.sa_flags = SA_SIGINFO;
- sigaction(SIGRTMIN + 1, &act, NULL);
-
- fd = open(".", O_RDONLY);
- fcntl(fd, F_SETSIG, SIGRTMIN + 1);
- fcntl(fd, F_NOTIFY, DN_MODIFY|DN_CREATE|DN_MULTISHOT);
- /* we will now be notified if any of the files
- in "." is modified or new files are created */
- while (1) {
- pause();
- printf("Got event on fd=%d\n", event_fd);
- }
- }
+NOTE
+----
+Beginning with Linux 2.6.13, dnotify has been replaced by inotify.
+See Documentation/filesystems/inotify.txt for more information on it.
diff --git a/Documentation/filesystems/dnotify_test.c b/Documentation/filesystems/dnotify_test.c
new file mode 100644
index 00000000000..8b37b4a1e18
--- /dev/null
+++ b/Documentation/filesystems/dnotify_test.c
@@ -0,0 +1,34 @@
+#define _GNU_SOURCE /* needed to get the defines */
+#include <fcntl.h> /* in glibc 2.2 this has the needed
+ values defined */
+#include <signal.h>
+#include <stdio.h>
+#include <unistd.h>
+
+static volatile int event_fd;
+
+static void handler(int sig, siginfo_t *si, void *data)
+{
+ event_fd = si->si_fd;
+}
+
+int main(void)
+{
+ struct sigaction act;
+ int fd;
+
+ act.sa_sigaction = handler;
+ sigemptyset(&act.sa_mask);
+ act.sa_flags = SA_SIGINFO;
+ sigaction(SIGRTMIN + 1, &act, NULL);
+
+ fd = open(".", O_RDONLY);
+ fcntl(fd, F_SETSIG, SIGRTMIN + 1);
+ fcntl(fd, F_NOTIFY, DN_MODIFY|DN_CREATE|DN_MULTISHOT);
+ /* we will now be notified if any of the files
+ in "." is modified or new files are created */
+ while (1) {
+ pause();
+ printf("Got event on fd=%d\n", event_fd);
+ }
+}
diff --git a/Documentation/filesystems/ext3.txt b/Documentation/filesystems/ext3.txt
index 867c5b50cb4..272f80d5f96 100644
--- a/Documentation/filesystems/ext3.txt
+++ b/Documentation/filesystems/ext3.txt
@@ -59,8 +59,19 @@ commit=nrsec (*) Ext3 can be told to sync all its data and metadata
Setting it to very large values will improve
performance.
-barrier=1 This enables/disables barriers. barrier=0 disables
- it, barrier=1 enables it.
+barrier=<0(*)|1> This enables/disables the use of write barriers in
+barrier the jbd code. barrier=0 disables, barrier=1 enables.
+nobarrier (*) This also requires an IO stack which can support
+ barriers, and if jbd gets an error on a barrier
+ write, it will disable again with a warning.
+ Write barriers enforce proper on-disk ordering
+ of journal commits, making volatile disk write caches
+ safe to use, at some performance penalty. If
+ your disks are battery-backed in one way or another,
+ disabling barriers may safely improve performance.
+ The mount options "barrier" and "nobarrier" can
+ also be used to enable or disable barriers, for
+ consistency with other ext3 mount options.
orlov (*) This enables the new Orlov block allocator. It is
enabled by default.
diff --git a/Documentation/filesystems/fiemap.txt b/Documentation/filesystems/fiemap.txt
index 606233cd461..1b805a0efbb 100644
--- a/Documentation/filesystems/fiemap.txt
+++ b/Documentation/filesystems/fiemap.txt
@@ -38,7 +38,7 @@ flags, it will return EBADR and the contents of fm_flags will contain
the set of flags which caused the error. If the kernel is compatible
with all flags passed, the contents of fm_flags will be unmodified.
It is up to userspace to determine whether rejection of a particular
-flag is fatal to it's operation. This scheme is intended to allow the
+flag is fatal to its operation. This scheme is intended to allow the
fiemap interface to grow in the future but without losing
compatibility with old software.
@@ -56,7 +56,7 @@ If this flag is set, the kernel will sync the file before mapping extents.
* FIEMAP_FLAG_XATTR
If this flag is set, the extents returned will describe the inodes
-extended attribute lookup tree, instead of it's data tree.
+extended attribute lookup tree, instead of its data tree.
Extent Mapping
@@ -89,7 +89,7 @@ struct fiemap_extent {
};
All offsets and lengths are in bytes and mirror those on disk. It is valid
-for an extents logical offset to start before the request or it's logical
+for an extents logical offset to start before the request or its logical
length to extend past the request. Unless FIEMAP_EXTENT_NOT_ALIGNED is
returned, fe_logical, fe_physical, and fe_length will be aligned to the
block size of the file system. With the exception of extents flagged as
@@ -125,7 +125,7 @@ been allocated for the file yet.
* FIEMAP_EXTENT_DELALLOC
- This will also set FIEMAP_EXTENT_UNKNOWN.
-Delayed allocation - while there is data for this extent, it's
+Delayed allocation - while there is data for this extent, its
physical location has not been allocated yet.
* FIEMAP_EXTENT_ENCODED
@@ -159,7 +159,7 @@ Data is located within a meta data block.
Data is packed into a block with data from other files.
* FIEMAP_EXTENT_UNWRITTEN
-Unwritten extent - the extent is allocated but it's data has not been
+Unwritten extent - the extent is allocated but its data has not been
initialized. This indicates the extent's data will be all zero if read
through the filesystem but the contents are undefined if read directly from
the device.
@@ -176,7 +176,7 @@ VFS -> File System Implementation
File systems wishing to support fiemap must implement a ->fiemap callback on
their inode_operations structure. The fs ->fiemap call is responsible for
-defining it's set of supported fiemap flags, and calling a helper function on
+defining its set of supported fiemap flags, and calling a helper function on
each discovered extent:
struct inode_operations {
diff --git a/Documentation/filesystems/fuse.txt b/Documentation/filesystems/fuse.txt
index 397a41adb4c..13af4a49e7d 100644
--- a/Documentation/filesystems/fuse.txt
+++ b/Documentation/filesystems/fuse.txt
@@ -91,7 +91,7 @@ Mount options
'default_permissions'
By default FUSE doesn't check file access permissions, the
- filesystem is free to implement it's access policy or leave it to
+ filesystem is free to implement its access policy or leave it to
the underlying file access mechanism (e.g. in case of network
filesystems). This option enables permission checking, restricting
access based on file mode. It is usually useful together with the
@@ -171,7 +171,7 @@ or may honor them by sending a reply to the _original_ request, with
the error set to EINTR.
It is also possible that there's a race between processing the
-original request and it's INTERRUPT request. There are two possibilities:
+original request and its INTERRUPT request. There are two possibilities:
1) The INTERRUPT request is processed before the original request is
processed
diff --git a/Documentation/filesystems/gfs2.txt b/Documentation/filesystems/gfs2.txt
index 5e3ab8f3bef..0b59c020091 100644
--- a/Documentation/filesystems/gfs2.txt
+++ b/Documentation/filesystems/gfs2.txt
@@ -1,7 +1,7 @@
Global File System
------------------
-http://sources.redhat.com/cluster/
+http://sources.redhat.com/cluster/wiki/
GFS is a cluster file system. It allows a cluster of computers to
simultaneously use a block device that is shared between them (with FC,
@@ -36,11 +36,11 @@ GFS2 is not on-disk compatible with previous versions of GFS, but it
is pretty close.
The following man pages can be found at the URL above:
- fsck.gfs2 to repair a filesystem
- gfs2_grow to expand a filesystem online
- gfs2_jadd to add journals to a filesystem online
- gfs2_tool to manipulate, examine and tune a filesystem
+ fsck.gfs2 to repair a filesystem
+ gfs2_grow to expand a filesystem online
+ gfs2_jadd to add journals to a filesystem online
+ gfs2_tool to manipulate, examine and tune a filesystem
gfs2_quota to examine and change quota values in a filesystem
gfs2_convert to convert a gfs filesystem to gfs2 in-place
mount.gfs2 to help mount(8) mount a filesystem
- mkfs.gfs2 to make a filesystem
+ mkfs.gfs2 to make a filesystem
diff --git a/Documentation/filesystems/hpfs.txt b/Documentation/filesystems/hpfs.txt
index fa45c3baed9..74630bd504f 100644
--- a/Documentation/filesystems/hpfs.txt
+++ b/Documentation/filesystems/hpfs.txt
@@ -103,7 +103,7 @@ to analyze or change OS2SYS.INI.
Codepages
HPFS can contain several uppercasing tables for several codepages and each
-file has a pointer to codepage it's name is in. However OS/2 was created in
+file has a pointer to codepage its name is in. However OS/2 was created in
America where people don't care much about codepages and so multiple codepages
support is quite buggy. I have Czech OS/2 working in codepage 852 on my disk.
Once I booted English OS/2 working in cp 850 and I created a file on my 852
diff --git a/Documentation/filesystems/isofs.txt b/Documentation/filesystems/isofs.txt
index 3c367c3b360..ba0a93384de 100644
--- a/Documentation/filesystems/isofs.txt
+++ b/Documentation/filesystems/isofs.txt
@@ -41,7 +41,7 @@ Mount options unique to the isofs filesystem.
sbsector=xxx Session begins from sector xxx
Recommended documents about ISO 9660 standard are located at:
-http://www.y-adagio.com/public/standards/iso_cdromr/tocont.htm
+http://www.y-adagio.com/
ftp://ftp.ecma.ch/ecma-st/Ecma-119.pdf
Quoting from the PDF "This 2nd Edition of Standard ECMA-119 is technically
identical with ISO 9660.", so it is a valid and gratis substitute of the
diff --git a/Documentation/filesystems/logfs.txt b/Documentation/filesystems/logfs.txt
new file mode 100644
index 00000000000..bca42c22a14
--- /dev/null
+++ b/Documentation/filesystems/logfs.txt
@@ -0,0 +1,241 @@
+
+The LogFS Flash Filesystem
+==========================
+
+Specification
+=============
+
+Superblocks
+-----------
+
+Two superblocks exist at the beginning and end of the filesystem.
+Each superblock is 256 Bytes large, with another 3840 Bytes reserved
+for future purposes, making a total of 4096 Bytes.
+
+Superblock locations may differ for MTD and block devices. On MTD the
+first non-bad block contains a superblock in the first 4096 Bytes and
+the last non-bad block contains a superblock in the last 4096 Bytes.
+On block devices, the first 4096 Bytes of the device contain the first
+superblock and the last aligned 4096 Byte-block contains the second
+superblock.
+
+For the most part, the superblocks can be considered read-only. They
+are written only to correct errors detected within the superblocks,
+move the journal and change the filesystem parameters through tunefs.
+As a result, the superblock does not contain any fields that require
+constant updates, like the amount of free space, etc.
+
+Segments
+--------
+
+The space in the device is split up into equal-sized segments.
+Segments are the primary write unit of LogFS. Within each segments,
+writes happen from front (low addresses) to back (high addresses. If
+only a partial segment has been written, the segment number, the
+current position within and optionally a write buffer are stored in
+the journal.
+
+Segments are erased as a whole. Therefore Garbage Collection may be
+required to completely free a segment before doing so.
+
+Journal
+--------
+
+The journal contains all global information about the filesystem that
+is subject to frequent change. At mount time, it has to be scanned
+for the most recent commit entry, which contains a list of pointers to
+all currently valid entries.
+
+Object Store
+------------
+
+All space except for the superblocks and journal is part of the object
+store. Each segment contains a segment header and a number of
+objects, each consisting of the object header and the payload.
+Objects are either inodes, directory entries (dentries), file data
+blocks or indirect blocks.
+
+Levels
+------
+
+Garbage collection (GC) may fail if all data is written
+indiscriminately. One requirement of GC is that data is separated
+roughly according to the distance between the tree root and the data.
+Effectively that means all file data is on level 0, indirect blocks
+are on levels 1, 2, 3 4 or 5 for 1x, 2x, 3x, 4x or 5x indirect blocks,
+respectively. Inode file data is on level 6 for the inodes and 7-11
+for indirect blocks.
+
+Each segment contains objects of a single level only. As a result,
+each level requires its own separate segment to be open for writing.
+
+Inode File
+----------
+
+All inodes are stored in a special file, the inode file. Single
+exception is the inode file's inode (master inode) which for obvious
+reasons is stored in the journal instead. Instead of data blocks, the
+leaf nodes of the inode files are inodes.
+
+Aliases
+-------
+
+Writes in LogFS are done by means of a wandering tree. A naïve
+implementation would require that for each write or a block, all
+parent blocks are written as well, since the block pointers have
+changed. Such an implementation would not be very efficient.
+
+In LogFS, the block pointer changes are cached in the journal by means
+of alias entries. Each alias consists of its logical address - inode
+number, block index, level and child number (index into block) - and
+the changed data. Any 8-byte word can be changes in this manner.
+
+Currently aliases are used for block pointers, file size, file used
+bytes and the height of an inodes indirect tree.
+
+Segment Aliases
+---------------
+
+Related to regular aliases, these are used to handle bad blocks.
+Initially, bad blocks are handled by moving the affected segment
+content to a spare segment and noting this move in the journal with a
+segment alias, a simple (to, from) tupel. GC will later empty this
+segment and the alias can be removed again. This is used on MTD only.
+
+Vim
+---
+
+By cleverly predicting the life time of data, it is possible to
+separate long-living data from short-living data and thereby reduce
+the GC overhead later. Each type of distinc life expectency (vim) can
+have a separate segment open for writing. Each (level, vim) tupel can
+be open just once. If an open segment with unknown vim is encountered
+at mount time, it is closed and ignored henceforth.
+
+Indirect Tree
+-------------
+
+Inodes in LogFS are similar to FFS-style filesystems with direct and
+indirect block pointers. One difference is that LogFS uses a single
+indirect pointer that can be either a 1x, 2x, etc. indirect pointer.
+A height field in the inode defines the height of the indirect tree
+and thereby the indirection of the pointer.
+
+Another difference is the addressing of indirect blocks. In LogFS,
+the first 16 pointers in the first indirect block are left empty,
+corresponding to the 16 direct pointers in the inode. In ext2 (maybe
+others as well) the first pointer in the first indirect block
+corresponds to logical block 12, skipping the 12 direct pointers.
+So where ext2 is using arithmetic to better utilize space, LogFS keeps
+arithmetic simple and uses compression to save space.
+
+Compression
+-----------
+
+Both file data and metadata can be compressed. Compression for file
+data can be enabled with chattr +c and disabled with chattr -c. Doing
+so has no effect on existing data, but new data will be stored
+accordingly. New inodes will inherit the compression flag of the
+parent directory.
+
+Metadata is always compressed. However, the space accounting ignores
+this and charges for the uncompressed size. Failing to do so could
+result in GC failures when, after moving some data, indirect blocks
+compress worse than previously. Even on a 100% full medium, GC may
+not consume any extra space, so the compression gains are lost space
+to the user.
+
+However, they are not lost space to the filesystem internals. By
+cheating the user for those bytes, the filesystem gained some slack
+space and GC will run less often and faster.
+
+Garbage Collection and Wear Leveling
+------------------------------------
+
+Garbage collection is invoked whenever the number of free segments
+falls below a threshold. The best (known) candidate is picked based
+on the least amount of valid data contained in the segment. All
+remaining valid data is copied elsewhere, thereby invalidating it.
+
+The GC code also checks for aliases and writes then back if their
+number gets too large.
+
+Wear leveling is done by occasionally picking a suboptimal segment for
+garbage collection. If a stale segments erase count is significantly
+lower than the active segments' erase counts, it will be picked. Wear
+leveling is rate limited, so it will never monopolize the device for
+more than one segment worth at a time.
+
+Values for "occasionally", "significantly lower" are compile time
+constants.
+
+Hashed directories
+------------------
+
+To satisfy efficient lookup(), directory entries are hashed and
+located based on the hash. In order to both support large directories
+and not be overly inefficient for small directories, several hash
+tables of increasing size are used. For each table, the hash value
+modulo the table size gives the table index.
+
+Tables sizes are chosen to limit the number of indirect blocks with a
+fully populated table to 0, 1, 2 or 3 respectively. So the first
+table contains 16 entries, the second 512-16, etc.
+
+The last table is special in several ways. First its size depends on
+the effective 32bit limit on telldir/seekdir cookies. Since logfs
+uses the upper half of the address space for indirect blocks, the size
+is limited to 2^31. Secondly the table contains hash buckets with 16
+entries each.
+
+Using single-entry buckets would result in birthday "attacks". At
+just 2^16 used entries, hash collisions would be likely (P >= 0.5).
+My math skills are insufficient to do the combinatorics for the 17x
+collisions necessary to overflow a bucket, but testing showed that in
+10,000 runs the lowest directory fill before a bucket overflow was
+188,057,130 entries with an average of 315,149,915 entries. So for
+directory sizes of up to a million, bucket overflows should be
+virtually impossible under normal circumstances.
+
+With carefully chosen filenames, it is obviously possible to cause an
+overflow with just 21 entries (4 higher tables + 16 entries + 1). So
+there may be a security concern if a malicious user has write access
+to a directory.
+
+Open For Discussion
+===================
+
+Device Address Space
+--------------------
+
+A device address space is used for caching. Both block devices and
+MTD provide functions to either read a single page or write a segment.
+Partial segments may be written for data integrity, but where possible
+complete segments are written for performance on simple block device
+flash media.
+
+Meta Inodes
+-----------
+
+Inodes are stored in the inode file, which is just a regular file for
+most purposes. At umount time, however, the inode file needs to
+remain open until all dirty inodes are written. So
+generic_shutdown_super() may not close this inode, but shouldn't
+complain about remaining inodes due to the inode file either. Same
+goes for mapping inode of the device address space.
+
+Currently logfs uses a hack that essentially copies part of fs/inode.c
+code over. A general solution would be preferred.
+
+Indirect block mapping
+----------------------
+
+With compression, the block device (or mapping inode) cannot be used
+to cache indirect blocks. Some other place is required. Currently
+logfs uses the top half of each inode's address space. The low 8TB
+(on 32bit) are filled with file data, the high 8TB are used for
+indirect blocks.
+
+One problem is that 16TB files created on 64bit systems actually have
+data in the top 8TB. But files >16TB would cause problems anyway, so
+only the limit has changed.
diff --git a/Documentation/filesystems/nfs/nfs41-server.txt b/Documentation/filesystems/nfs/nfs41-server.txt
index 1bd0d0c0517..04884914a1c 100644
--- a/Documentation/filesystems/nfs/nfs41-server.txt
+++ b/Documentation/filesystems/nfs/nfs41-server.txt
@@ -17,8 +17,7 @@ kernels must turn 4.1 on or off *before* turning support for version 4
on or off; rpc.nfsd does this correctly.)
The NFSv4 minorversion 1 (NFSv4.1) implementation in nfsd is based
-on the latest NFSv4.1 Internet Draft:
-http://tools.ietf.org/html/draft-ietf-nfsv4-minorversion1-29
+on RFC 5661.
From the many new features in NFSv4.1 the current implementation
focuses on the mandatory-to-implement NFSv4.1 Sessions, providing
@@ -44,7 +43,7 @@ interoperability problems with future clients. Known issues:
trunking, but this is a mandatory feature, and its use is
recommended to clients in a number of places. (E.g. to ensure
timely renewal in case an existing connection's retry timeouts
- have gotten too long; see section 8.3 of the draft.)
+ have gotten too long; see section 8.3 of the RFC.)
Therefore, lack of this feature may cause future clients to
fail.
- Incomplete backchannel support: incomplete backchannel gss
@@ -138,7 +137,7 @@ NS*| OPENATTR | OPT | | Section 18.17 |
| READ | REQ | | Section 18.22 |
| READDIR | REQ | | Section 18.23 |
| READLINK | OPT | | Section 18.24 |
-NS | RECLAIM_COMPLETE | REQ | | Section 18.51 |
+ | RECLAIM_COMPLETE | REQ | | Section 18.51 |
| RELEASE_LOCKOWNER | MNI | | N/A |
| REMOVE | REQ | | Section 18.25 |
| RENAME | REQ | | Section 18.26 |
diff --git a/Documentation/filesystems/nfs/nfsroot.txt b/Documentation/filesystems/nfs/nfsroot.txt
index 3ba0b945aaf..f2430a7974e 100644
--- a/Documentation/filesystems/nfs/nfsroot.txt
+++ b/Documentation/filesystems/nfs/nfsroot.txt
@@ -124,6 +124,8 @@ ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
<hostname> Name of the client. May be supplied by autoconfiguration,
but its absence will not trigger autoconfiguration.
+ If specified and DHCP is used, the user provided hostname will
+ be carried in the DHCP request to hopefully update DNS record.
Default: Client IP address is used in ASCII notation.
diff --git a/Documentation/filesystems/nfs/rpc-cache.txt b/Documentation/filesystems/nfs/rpc-cache.txt
index 8a382bea680..ebcaaee2161 100644
--- a/Documentation/filesystems/nfs/rpc-cache.txt
+++ b/Documentation/filesystems/nfs/rpc-cache.txt
@@ -185,7 +185,7 @@ failed lookup meant a definite 'no'.
request/response format
-----------------------
-While each cache is free to use it's own format for requests
+While each cache is free to use its own format for requests
and responses over channel, the following is recommended as
appropriate and support routines are available to help:
Each request or response record should be printable ASCII
diff --git a/Documentation/filesystems/nilfs2.txt b/Documentation/filesystems/nilfs2.txt
index 839efd8a8a8..d5c0cef38a7 100644
--- a/Documentation/filesystems/nilfs2.txt
+++ b/Documentation/filesystems/nilfs2.txt
@@ -49,9 +49,12 @@ Mount options
NILFS2 supports the following mount options:
(*) == default
-nobarrier Disables barriers.
-errors=continue(*) Keep going on a filesystem error.
-errors=remount-ro Remount the filesystem read-only on an error.
+barrier(*) This enables/disables the use of write barriers. This
+nobarrier requires an IO stack which can support barriers, and
+ if nilfs gets an error on a barrier write, it will
+ disable again with a warning.
+errors=continue Keep going on a filesystem error.
+errors=remount-ro(*) Remount the filesystem read-only on an error.
errors=panic Panic and halt the machine if an error occurs.
cp=n Specify the checkpoint-number of the snapshot to be
mounted. Checkpoints and snapshots are listed by lscp
@@ -74,6 +77,10 @@ norecovery Disable recovery of the filesystem on mount.
This disables every write access on the device for
read-only mounts or snapshots. This option will fail
for r/w mounts on an unclean volume.
+discard This enables/disables the use of discard/TRIM commands.
+nodiscard(*) The discard/TRIM commands are sent to the underlying
+ block device when blocks are freed. This is useful
+ for SSD devices and sparse/thinly-provisioned LUNs.
NILFS2 usage
============
diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt
index c58b9f5ba00..1f7ae144f6d 100644
--- a/Documentation/filesystems/ocfs2.txt
+++ b/Documentation/filesystems/ocfs2.txt
@@ -80,3 +80,10 @@ user_xattr (*) Enables Extended User Attributes.
nouser_xattr Disables Extended User Attributes.
acl Enables POSIX Access Control Lists support.
noacl (*) Disables POSIX Access Control Lists support.
+resv_level=2 (*) Set how agressive allocation reservations will be.
+ Valid values are between 0 (reservations off) to 8
+ (maximum space for reservations).
+dir_resv_level= (*) By default, directory reservations will scale with file
+ reservations - users should rarely need to change this
+ value. If allocation reservations are turned off, this
+ option will have no effect.
diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting
index a7e9746ee7e..b12c8953868 100644
--- a/Documentation/filesystems/porting
+++ b/Documentation/filesystems/porting
@@ -273,3 +273,48 @@ it's safe to remove it. If you don't need it, remove it.
deliberate; as soon as struct block_device * is propagated in a reasonable
way by that code fixing will become trivial; until then nothing can be
done.
+
+[mandatory]
+
+ block truncatation on error exit from ->write_begin, and ->direct_IO
+moved from generic methods (block_write_begin, cont_write_begin,
+nobh_write_begin, blockdev_direct_IO*) to callers. Take a look at
+ext2_write_failed and callers for an example.
+
+[mandatory]
+
+ ->truncate is going away. The whole truncate sequence needs to be
+implemented in ->setattr, which is now mandatory for filesystems
+implementing on-disk size changes. Start with a copy of the old inode_setattr
+and vmtruncate, and the reorder the vmtruncate + foofs_vmtruncate sequence to
+be in order of zeroing blocks using block_truncate_page or similar helpers,
+size update and on finally on-disk truncation which should not fail.
+inode_change_ok now includes the size checks for ATTR_SIZE and must be called
+in the beginning of ->setattr unconditionally.
+
+[mandatory]
+
+ ->clear_inode() and ->delete_inode() are gone; ->evict_inode() should
+be used instead. It gets called whenever the inode is evicted, whether it has
+remaining links or not. Caller does *not* evict the pagecache or inode-associated
+metadata buffers; getting rid of those is responsibility of method, as it had
+been for ->delete_inode().
+ ->drop_inode() returns int now; it's called on final iput() with inode_lock
+held and it returns true if filesystems wants the inode to be dropped. As before,
+generic_drop_inode() is still the default and it's been updated appropriately.
+generic_delete_inode() is also alive and it consists simply of return 1. Note that
+all actual eviction work is done by caller after ->drop_inode() returns.
+ clear_inode() is gone; use end_writeback() instead. As before, it must
+be called exactly once on each call of ->evict_inode() (as it used to be for
+each call of ->delete_inode()). Unlike before, if you are using inode-associated
+metadata buffers (i.e. mark_buffer_dirty_inode()), it's your responsibility to
+call invalidate_inode_buffers() before end_writeback().
+ No async writeback (and thus no calls of ->write_inode()) will happen
+after end_writeback() returns, so actions that should not overlap with ->write_inode()
+(e.g. freeing on-disk inode if i_nlink is 0) ought to be done after that call.
+
+ NOTE: checking i_nlink in the beginning of ->write_inode() and bailing out
+if it's zero is not *and* *never* *had* *been* enough. Final unlink() and iput()
+may happen while the inode is in the middle of ->write_inode(); e.g. if you blindly
+free the on-disk inode, you may end up doing that while ->write_inode() is writing
+to it.
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 0d07513a67a..a6aca874088 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -33,7 +33,8 @@ Table of Contents
2 Modifying System Parameters
3 Per-Process Parameters
- 3.1 /proc/<pid>/oom_adj - Adjust the oom-killer score
+ 3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj - Adjust the oom-killer
+ score
3.2 /proc/<pid>/oom_score - Display current oom-killer score
3.3 /proc/<pid>/io - Display the IO accounting fields
3.4 /proc/<pid>/coredump_filter - Core dump filtering settings
@@ -73,9 +74,9 @@ contact Bodo Bauer at bb@ricochet.net. We'll be happy to add them to this
document.
The latest version of this document is available online at
-http://skaro.nightcrawler.com/~bb/Docs/Proc as HTML version.
+http://tldp.org/LDP/Linux-Filesystem-Hierarchy/html/proc.html
-If the above direction does not works for you, ypu could try the kernel
+If the above direction does not works for you, you could try the kernel
mailing list at linux-kernel@vger.kernel.org and/or try to reach me at
comandante@zaralinux.com.
@@ -164,6 +165,7 @@ read the file /proc/PID/status:
VmExe: 68 kB
VmLib: 1412 kB
VmPTE: 20 kb
+ VmSwap: 0 kB
Threads: 1
SigQ: 0/28578
SigPnd: 0000000000000000
@@ -188,7 +190,13 @@ memory usage. Its seven fields are explained in Table 1-3. The stat file
contains details information about the process itself. Its fields are
explained in Table 1-4.
-Table 1-2: Contents of the statm files (as of 2.6.30-rc7)
+(for SMP CONFIG users)
+For making accounting scalable, RSS related information are handled in
+asynchronous manner and the vaule may not be very precise. To see a precise
+snapshot of a moment, you can see /proc/<pid>/smaps file and scan page table.
+It's slow but very precise.
+
+Table 1-2: Contents of the status files (as of 2.6.30-rc7)
..............................................................................
Field Content
Name filename of the executable
@@ -213,6 +221,7 @@ Table 1-2: Contents of the statm files (as of 2.6.30-rc7)
VmExe size of text segment
VmLib size of shared library code
VmPTE size of page table entries
+ VmSwap size of swap usage (the number of referred swapents)
Threads number of threads
SigQ number of signals queued/max. number for queue
SigPnd bitmap of pending signals for the thread
@@ -297,7 +306,7 @@ Table 1-4: Contents of the stat files (as of 2.6.30-rc7)
cgtime guest time of the task children in jiffies
..............................................................................
-The /proc/PID/map file containing the currently mapped memory regions and
+The /proc/PID/maps file containing the currently mapped memory regions and
their access permissions.
The format is:
@@ -308,7 +317,7 @@ address perms offset dev inode pathname
08049000-0804a000 rw-p 00001000 03:00 8312 /opt/test
0804a000-0806b000 rw-p 00000000 00:00 0 [heap]
a7cb1000-a7cb2000 ---p 00000000 00:00 0
-a7cb2000-a7eb2000 rw-p 00000000 00:00 0 [threadstack:001ff4b4]
+a7cb2000-a7eb2000 rw-p 00000000 00:00 0
a7eb2000-a7eb3000 ---p 00000000 00:00 0
a7eb3000-a7ed5000 rw-p 00000000 00:00 0
a7ed5000-a8008000 r-xp 00000000 03:00 4222 /lib/libc.so.6
@@ -344,7 +353,6 @@ is not associated with a file:
[stack] = the stack of the main process
[vdso] = the "virtual dynamic shared object",
the kernel system call handler
- [threadstack:xxxxxxxx] = the stack of the thread, xxxxxxxx is the stack size
or if empty, the mapping is anonymous.
@@ -430,6 +438,7 @@ Table 1-5: Kernel info in /proc
modules List of loaded modules
mounts Mounted filesystems
net Networking info (see text)
+ pagetypeinfo Additional page allocator information (see text) (2.5)
partitions Table of partitions known to the system
pci Deprecated info of PCI bus (new way -> /proc/bus/pci/,
decoupled by lspci (2.4)
@@ -557,6 +566,10 @@ The default_smp_affinity mask applies to all non-active IRQs, which are the
IRQs which have not yet been allocated/activated, and hence which lack a
/proc/irq/[0-9]* directory.
+The node file on an SMP system shows the node to which the device using the IRQ
+reports itself as being attached. This hardware locality information does not
+include information about any possible driver locality preference.
+
prof_cpu_mask specifies which CPUs are to be profiled by the system wide
profiler. Default value is ffffffff (all cpus).
@@ -584,7 +597,7 @@ Node 0, zone DMA 0 4 5 4 4 3 ...
Node 0, zone Normal 1 0 0 1 101 8 ...
Node 0, zone HighMem 2 0 0 1 1 0 ...
-Memory fragmentation is a problem under some workloads, and buddyinfo is a
+External fragmentation is a problem under some workloads, and buddyinfo is a
useful tool for helping diagnose these problems. Buddyinfo will give you a
clue as to how big an area you can safely allocate, or why a previous
allocation failed.
@@ -594,6 +607,48 @@ available. In this case, there are 0 chunks of 2^0*PAGE_SIZE available in
ZONE_DMA, 4 chunks of 2^1*PAGE_SIZE in ZONE_DMA, 101 chunks of 2^4*PAGE_SIZE
available in ZONE_NORMAL, etc...
+More information relevant to external fragmentation can be found in
+pagetypeinfo.
+
+> cat /proc/pagetypeinfo
+Page block order: 9
+Pages per block: 512
+
+Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10
+Node 0, zone DMA, type Unmovable 0 0 0 1 1 1 1 1 1 1 0
+Node 0, zone DMA, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0
+Node 0, zone DMA, type Movable 1 1 2 1 2 1 1 0 1 0 2
+Node 0, zone DMA, type Reserve 0 0 0 0 0 0 0 0 0 1 0
+Node 0, zone DMA, type Isolate 0 0 0 0 0 0 0 0 0 0 0
+Node 0, zone DMA32, type Unmovable 103 54 77 1 1 1 11 8 7 1 9
+Node 0, zone DMA32, type Reclaimable 0 0 2 1 0 0 0 0 1 0 0
+Node 0, zone DMA32, type Movable 169 152 113 91 77 54 39 13 6 1 452
+Node 0, zone DMA32, type Reserve 1 2 2 2 2 0 1 1 1 1 0
+Node 0, zone DMA32, type Isolate 0 0 0 0 0 0 0 0 0 0 0
+
+Number of blocks type Unmovable Reclaimable Movable Reserve Isolate
+Node 0, zone DMA 2 0 5 1 0
+Node 0, zone DMA32 41 6 967 2 0
+
+Fragmentation avoidance in the kernel works by grouping pages of different
+migrate types into the same contiguous regions of memory called page blocks.
+A page block is typically the size of the default hugepage size e.g. 2MB on
+X86-64. By keeping pages grouped based on their ability to move, the kernel
+can reclaim pages within a page block to satisfy a high-order allocation.
+
+The pagetypinfo begins with information on the size of a page block. It
+then gives the same type of information as buddyinfo except broken down
+by migrate-type and finishes with details on how many page blocks of each
+type exist.
+
+If min_free_kbytes has been tuned correctly (recommendations made by hugeadm
+from libhugetlbfs http://sourceforge.net/projects/libhugetlbfs/), one can
+make an estimate of the likely number of huge pages that can be allocated
+at a given point in time. All the "Movable" blocks should be allocatable
+unless memory has been mlock()'d. Some of the Reclaimable blocks should
+also be allocatable although a lot of filesystem metadata may have to be
+reclaimed to achieve this.
+
..............................................................................
meminfo:
@@ -914,7 +969,7 @@ your system and how much traffic was routed over those devices:
...] 1375103 17405 0 0 0 0 0 0
...] 1703981 5535 0 0 0 3 0 0
-In addition, each Channel Bond interface has it's own directory. For
+In addition, each Channel Bond interface has its own directory. For
example, the bond0 device will have a directory called /proc/net/bond0/.
It will contain information that is specific to that bond, such as the
current slaves of the bond, the link status of the slaves, and how
@@ -1180,42 +1235,64 @@ of the kernel.
CHAPTER 3: PER-PROCESS PARAMETERS
------------------------------------------------------------------------------
-3.1 /proc/<pid>/oom_adj - Adjust the oom-killer score
-------------------------------------------------------
-
-This file can be used to adjust the score used to select which processes
-should be killed in an out-of-memory situation. Giving it a high score will
-increase the likelihood of this process being killed by the oom-killer. Valid
-values are in the range -16 to +15, plus the special value -17, which disables
-oom-killing altogether for this process.
-
-The process to be killed in an out-of-memory situation is selected among all others
-based on its badness score. This value equals the original memory size of the process
-and is then updated according to its CPU time (utime + stime) and the
-run time (uptime - start time). The longer it runs the smaller is the score.
-Badness score is divided by the square root of the CPU time and then by
-the double square root of the run time.
-
-Swapped out tasks are killed first. Half of each child's memory size is added to
-the parent's score if they do not share the same memory. Thus forking servers
-are the prime candidates to be killed. Having only one 'hungry' child will make
-parent less preferable than the child.
-
-/proc/<pid>/oom_score shows process' current badness score.
-
-The following heuristics are then applied:
- * if the task was reniced, its score doubles
- * superuser or direct hardware access tasks (CAP_SYS_ADMIN, CAP_SYS_RESOURCE
- or CAP_SYS_RAWIO) have their score divided by 4
- * if oom condition happened in one cpuset and checked process does not belong
- to it, its score is divided by 8
- * the resulting score is multiplied by two to the power of oom_adj, i.e.
- points <<= oom_adj when it is positive and
- points >>= -(oom_adj) otherwise
-
-The task with the highest badness score is then selected and its children
-are killed, process itself will be killed in an OOM situation when it does
-not have children or some of them disabled oom like described above.
+3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj- Adjust the oom-killer score
+--------------------------------------------------------------------------------
+
+These file can be used to adjust the badness heuristic used to select which
+process gets killed in out of memory conditions.
+
+The badness heuristic assigns a value to each candidate task ranging from 0
+(never kill) to 1000 (always kill) to determine which process is targeted. The
+units are roughly a proportion along that range of allowed memory the process
+may allocate from based on an estimation of its current memory and swap use.
+For example, if a task is using all allowed memory, its badness score will be
+1000. If it is using half of its allowed memory, its score will be 500.
+
+There is an additional factor included in the badness score: root
+processes are given 3% extra memory over other tasks.
+
+The amount of "allowed" memory depends on the context in which the oom killer
+was called. If it is due to the memory assigned to the allocating task's cpuset
+being exhausted, the allowed memory represents the set of mems assigned to that
+cpuset. If it is due to a mempolicy's node(s) being exhausted, the allowed
+memory represents the set of mempolicy nodes. If it is due to a memory
+limit (or swap limit) being reached, the allowed memory is that configured
+limit. Finally, if it is due to the entire system being out of memory, the
+allowed memory represents all allocatable resources.
+
+The value of /proc/<pid>/oom_score_adj is added to the badness score before it
+is used to determine which task to kill. Acceptable values range from -1000
+(OOM_SCORE_ADJ_MIN) to +1000 (OOM_SCORE_ADJ_MAX). This allows userspace to
+polarize the preference for oom killing either by always preferring a certain
+task or completely disabling it. The lowest possible value, -1000, is
+equivalent to disabling oom killing entirely for that task since it will always
+report a badness score of 0.
+
+Consequently, it is very simple for userspace to define the amount of memory to
+consider for each task. Setting a /proc/<pid>/oom_score_adj value of +500, for
+example, is roughly equivalent to allowing the remainder of tasks sharing the
+same system, cpuset, mempolicy, or memory controller resources to use at least
+50% more memory. A value of -500, on the other hand, would be roughly
+equivalent to discounting 50% of the task's allowed memory from being considered
+as scoring against the task.
+
+For backwards compatibility with previous kernels, /proc/<pid>/oom_adj may also
+be used to tune the badness score. Its acceptable values range from -16
+(OOM_ADJUST_MIN) to +15 (OOM_ADJUST_MAX) and a special value of -17
+(OOM_DISABLE) to disable oom killing entirely for that task. Its value is
+scaled linearly with /proc/<pid>/oom_score_adj.
+
+Writing to /proc/<pid>/oom_score_adj or /proc/<pid>/oom_adj will change the
+other with its scaled value.
+
+NOTICE: /proc/<pid>/oom_adj is deprecated and will be removed, please see
+Documentation/feature-removal-schedule.txt.
+
+Caveat: when a parent task is selected, the oom killer will sacrifice any first
+generation children with seperate address spaces instead, if possible. This
+avoids servers and important system daemons from being killed and loses the
+minimal amount of work.
+
3.2 /proc/<pid>/oom_score - Display current oom-killer score
-------------------------------------------------------------
@@ -1311,7 +1388,7 @@ been accounted as having caused 1MB of write.
In other words: The number of bytes which this process caused to not happen,
by truncating pagecache. A task can cause "negative" IO too. If this task
truncates some dirty pagecache, some IO which another task has been accounted
-for (in it's write_bytes) will not be happening. We _could_ just subtract that
+for (in its write_bytes) will not be happening. We _could_ just subtract that
from the truncating task's write_bytes, but there is information loss in doing
that.
diff --git a/Documentation/filesystems/sharedsubtree.txt b/Documentation/filesystems/sharedsubtree.txt
index 23a181074f9..fc0e39af43c 100644
--- a/Documentation/filesystems/sharedsubtree.txt
+++ b/Documentation/filesystems/sharedsubtree.txt
@@ -837,6 +837,9 @@ replicas continue to be exactly same.
individual lists does not affect propagation or the way propagation
tree is modified by operations.
+ All vfsmounts in a peer group have the same ->mnt_master. If it is
+ non-NULL, they form a contiguous (ordered) segment of slave list.
+
A example propagation tree looks as shown in the figure below.
[ NOTE: Though it looks like a forest, if we consider all the shared
mounts as a conceptual entity called 'pnode', it becomes a tree]
@@ -874,8 +877,19 @@ replicas continue to be exactly same.
NOTE: The propagation tree is orthogonal to the mount tree.
+8B Locking:
+
+ ->mnt_share, ->mnt_slave, ->mnt_slave_list, ->mnt_master are protected
+ by namespace_sem (exclusive for modifications, shared for reading).
+
+ Normally we have ->mnt_flags modifications serialized by vfsmount_lock.
+ There are two exceptions: do_add_mount() and clone_mnt().
+ The former modifies a vfsmount that has not been visible in any shared
+ data structures yet.
+ The latter holds namespace_sem and the only references to vfsmount
+ are in lists that can't be traversed without namespace_sem.
-8B Algorithm:
+8C Algorithm:
The crux of the implementation resides in rbind/move operation.
diff --git a/Documentation/filesystems/smbfs.txt b/Documentation/filesystems/smbfs.txt
index f673ef0de0f..194fb0decd2 100644
--- a/Documentation/filesystems/smbfs.txt
+++ b/Documentation/filesystems/smbfs.txt
@@ -3,6 +3,6 @@ protocol used by Windows for Workgroups, Windows 95 and Windows NT.
Smbfs was inspired by Samba, the program written by Andrew Tridgell
that turns any Unix host into a file server for DOS or Windows clients.
-Smbfs is a SMB client, but uses parts of samba for it's operation. For
+Smbfs is a SMB client, but uses parts of samba for its operation. For
more info on samba, including documentation, please go to
http://www.samba.org/ and then on to your nearest mirror.
diff --git a/Documentation/filesystems/squashfs.txt b/Documentation/filesystems/squashfs.txt
index b324c033035..66699afd66c 100644
--- a/Documentation/filesystems/squashfs.txt
+++ b/Documentation/filesystems/squashfs.txt
@@ -2,7 +2,7 @@ SQUASHFS 4.0 FILESYSTEM
=======================
Squashfs is a compressed read-only filesystem for Linux.
-It uses zlib compression to compress files, inodes and directories.
+It uses zlib/lzo compression to compress files, inodes and directories.
Inodes in the system are very small and all blocks are packed to minimise
data overhead. Block sizes greater than 4K are supported up to a maximum
of 1Mbytes (default block size 128K).
@@ -38,7 +38,8 @@ Hard link support: yes no
Real inode numbers: yes no
32-bit uids/gids: yes no
File creation time: yes no
-Xattr and ACL support: no no
+Xattr support: yes no
+ACL support: no no
Squashfs compresses data, inodes and directories. In addition, inode and
directory data are highly compacted, and packed on byte boundaries. Each
@@ -58,7 +59,7 @@ obtained from this site also.
3. SQUASHFS FILESYSTEM DESIGN
-----------------------------
-A squashfs filesystem consists of seven parts, packed together on a byte
+A squashfs filesystem consists of a maximum of eight parts, packed together on a byte
alignment:
---------------
@@ -80,6 +81,9 @@ alignment:
|---------------|
| uid/gid |
| lookup table |
+ |---------------|
+ | xattr |
+ | table |
---------------
Compressed data blocks are written to the filesystem as files are read from
@@ -192,6 +196,26 @@ This table is stored compressed into metadata blocks. A second index table is
used to locate these. This second index table for speed of access (and because
it is small) is read at mount time and cached in memory.
+3.7 Xattr table
+---------------
+
+The xattr table contains extended attributes for each inode. The xattrs
+for each inode are stored in a list, each list entry containing a type,
+name and value field. The type field encodes the xattr prefix
+("user.", "trusted." etc) and it also encodes how the name/value fields
+should be interpreted. Currently the type indicates whether the value
+is stored inline (in which case the value field contains the xattr value),
+or if it is stored out of line (in which case the value field stores a
+reference to where the actual value is stored). This allows large values
+to be stored out of line improving scanning and lookup performance and it
+also allows values to be de-duplicated, the value being stored once, and
+all other occurences holding an out of line reference to that value.
+
+The xattr lists are packed into compressed 8K metadata blocks.
+To reduce overhead in inodes, rather than storing the on-disk
+location of the xattr list inside each inode, a 32-bit xattr id
+is stored. This xattr id is mapped into the location of the xattr
+list using a second xattr id lookup table.
4. TODOS AND OUTSTANDING ISSUES
-------------------------------
@@ -199,9 +223,7 @@ it is small) is read at mount time and cached in memory.
4.1 Todo list
-------------
-Implement Xattr and ACL support. The Squashfs 4.0 filesystem layout has hooks
-for these but the code has not been written. Once the code has been written
-the existing layout should not require modification.
+Implement ACL support.
4.2 Squashfs internal cache
---------------------------
diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt
index 85354b32d73..74eaac26f8b 100644
--- a/Documentation/filesystems/sysfs-pci.txt
+++ b/Documentation/filesystems/sysfs-pci.txt
@@ -39,7 +39,7 @@ files, each with their own function.
local_cpus nearby CPU mask (cpumask, ro)
remove remove device from kernel's list (ascii, wo)
resource PCI resource host addresses (ascii, ro)
- resource0..N PCI resource N, if present (binary, mmap)
+ resource0..N PCI resource N, if present (binary, mmap, rw[1])
resource0_wc..N_wc PCI WC map resource N, if prefetchable (binary, mmap)
rom PCI ROM resource, if present (binary, ro)
subsystem_device PCI subsystem device (ascii, ro)
@@ -54,13 +54,16 @@ files, each with their own function.
binary - file contains binary data
cpumask - file contains a cpumask type
+[1] rw for RESOURCE_IO (I/O port) regions only
+
The read only files are informational, writes to them will be ignored, with
the exception of the 'rom' file. Writable files can be used to perform
actions on the device (e.g. changing config space, detaching a device).
mmapable files are available via an mmap of the file at offset 0 and can be
used to do actual device programming from userspace. Note that some platforms
don't support mmapping of certain resources, so be sure to check the return
-value from any attempted mmap.
+value from any attempted mmap. The most notable of these are I/O port
+resources, which also provide read/write access.
The 'enable' file provides a counter that indicates how many times the device
has been enabled. If the 'enable' file currently returns '4', and a '1' is
diff --git a/Documentation/filesystems/sysfs-tagging.txt b/Documentation/filesystems/sysfs-tagging.txt
new file mode 100644
index 00000000000..caaaf1266d8
--- /dev/null
+++ b/Documentation/filesystems/sysfs-tagging.txt
@@ -0,0 +1,42 @@
+Sysfs tagging
+-------------
+
+(Taken almost verbatim from Eric Biederman's netns tagging patch
+commit msg)
+
+The problem. Network devices show up in sysfs and with the network
+namespace active multiple devices with the same name can show up in
+the same directory, ouch!
+
+To avoid that problem and allow existing applications in network
+namespaces to see the same interface that is currently presented in
+sysfs, sysfs now has tagging directory support.
+
+By using the network namespace pointers as tags to separate out the
+the sysfs directory entries we ensure that we don't have conflicts
+in the directories and applications only see a limited set of
+the network devices.
+
+Each sysfs directory entry may be tagged with zero or one
+namespaces. A sysfs_dirent is augmented with a void *s_ns. If a
+directory entry is tagged, then sysfs_dirent->s_flags will have a
+flag between KOBJ_NS_TYPE_NONE and KOBJ_NS_TYPES, and s_ns will
+point to the namespace to which it belongs.
+
+Each sysfs superblock's sysfs_super_info contains an array void
+*ns[KOBJ_NS_TYPES]. When a a task in a tagging namespace
+kobj_nstype first mounts sysfs, a new superblock is created. It
+will be differentiated from other sysfs mounts by having its
+s_fs_info->ns[kobj_nstype] set to the new namespace. Note that
+through bind mounting and mounts propagation, a task can easily view
+the contents of other namespaces' sysfs mounts. Therefore, when a
+namespace exits, it will call kobj_ns_exit() to invalidate any
+sysfs_dirent->s_ns pointers pointing to it.
+
+Users of this interface:
+- define a type in the kobj_ns_type enumeration.
+- call kobj_ns_type_register() with its kobj_ns_type_operations which has
+ - current_ns() which returns current's namespace
+ - netlink_ns() which returns a socket's namespace
+ - initial_ns() which returns the initial namesapce
+- call kobj_ns_exit() when an individual tag is no longer valid
diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt
index 931c806642c..5d1335faec2 100644
--- a/Documentation/filesystems/sysfs.txt
+++ b/Documentation/filesystems/sysfs.txt
@@ -4,7 +4,7 @@ sysfs - _The_ filesystem for exporting kernel objects.
Patrick Mochel <mochel@osdl.org>
Mike Murphy <mamurph@cs.clemson.edu>
-Revised: 22 February 2009
+Revised: 15 July 2010
Original: 10 January 2003
@@ -124,7 +124,7 @@ show and store methods of the attribute owners.
struct sysfs_ops {
ssize_t (*show)(struct kobject *, struct attribute *, char *);
- ssize_t (*store)(struct kobject *, struct attribute *, const char *);
+ ssize_t (*store)(struct kobject *, struct attribute *, const char *, size_t);
};
[ Subsystems should have already defined a struct kobj_type as a
@@ -139,18 +139,22 @@ calls the associated methods.
To illustrate:
+#define to_dev(obj) container_of(obj, struct device, kobj)
#define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr)
-#define to_dev(d) container_of(d, struct device, kobj)
-static ssize_t
-dev_attr_show(struct kobject * kobj, struct attribute * attr, char * buf)
+static ssize_t dev_attr_show(struct kobject *kobj, struct attribute *attr,
+ char *buf)
{
- struct device_attribute * dev_attr = to_dev_attr(attr);
- struct device * dev = to_dev(kobj);
- ssize_t ret = 0;
+ struct device_attribute *dev_attr = to_dev_attr(attr);
+ struct device *dev = to_dev(kobj);
+ ssize_t ret = -EIO;
if (dev_attr->show)
- ret = dev_attr->show(dev, buf);
+ ret = dev_attr->show(dev, dev_attr, buf);
+ if (ret >= (ssize_t)PAGE_SIZE) {
+ print_symbol("dev_attr_show: %s returned bad count\n",
+ (unsigned long)dev_attr->show);
+ }
return ret;
}
@@ -163,10 +167,9 @@ To read or write attributes, show() or store() methods must be
specified when declaring the attribute. The method types should be as
simple as those defined for device attributes:
-ssize_t (*show)(struct device * dev, struct device_attribute * attr,
- char * buf);
-ssize_t (*store)(struct device * dev, struct device_attribute * attr,
- const char * buf);
+ssize_t (*show)(struct device *dev, struct device_attribute *attr, char *buf);
+ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count);
IOW, they should take only an object, an attribute, and a buffer as parameters.
@@ -209,8 +212,8 @@ Other notes:
- show() should always use snprintf().
-- store() should return the number of bytes used from the buffer. This
- can be done using strlen().
+- store() should return the number of bytes used from the buffer. If the
+ entire buffer has been used, just return the count argument.
- show() or store() can always return errors. If a bad value comes
through, be sure to return an error.
@@ -223,15 +226,18 @@ Other notes:
A very simple (and naive) implementation of a device attribute is:
-static ssize_t show_name(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_name(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
return snprintf(buf, PAGE_SIZE, "%s\n", dev->name);
}
-static ssize_t store_name(struct device * dev, const char * buf)
+static ssize_t store_name(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
- sscanf(buf, "%20s", dev->name);
- return strnlen(buf, PAGE_SIZE);
+ snprintf(dev->name, sizeof(dev->name), "%.*s",
+ (int)min(count, sizeof(dev->name) - 1), buf);
+ return count;
}
static DEVICE_ATTR(name, S_IRUGO, show_name, store_name);
@@ -327,7 +333,7 @@ Structure:
struct bus_attribute {
struct attribute attr;
ssize_t (*show)(struct bus_type *, char * buf);
- ssize_t (*store)(struct bus_type *, const char * buf);
+ ssize_t (*store)(struct bus_type *, const char * buf, size_t count);
};
Declaring:
diff --git a/Documentation/filesystems/tmpfs.txt b/Documentation/filesystems/tmpfs.txt
index 3015da0c6b2..98ef5512415 100644
--- a/Documentation/filesystems/tmpfs.txt
+++ b/Documentation/filesystems/tmpfs.txt
@@ -82,21 +82,31 @@ tmpfs has a mount option to set the NUMA memory allocation policy for
all files in that instance (if CONFIG_NUMA is enabled) - which can be
adjusted on the fly via 'mount -o remount ...'
-mpol=default prefers to allocate memory from the local node
+mpol=default use the process allocation policy
+ (see set_mempolicy(2))
mpol=prefer:Node prefers to allocate memory from the given Node
mpol=bind:NodeList allocates memory only from nodes in NodeList
mpol=interleave prefers to allocate from each node in turn
mpol=interleave:NodeList allocates from each node of NodeList in turn
+mpol=local prefers to allocate memory from the local node
NodeList format is a comma-separated list of decimal numbers and ranges,
a range being two hyphen-separated decimal numbers, the smallest and
largest node numbers in the range. For example, mpol=bind:0-3,5,7,9-15
+A memory policy with a valid NodeList will be saved, as specified, for
+use at file creation time. When a task allocates a file in the file
+system, the mount option memory policy will be applied with a NodeList,
+if any, modified by the calling task's cpuset constraints
+[See Documentation/cgroups/cpusets.txt] and any optional flags, listed
+below. If the resulting NodeLists is the empty set, the effective memory
+policy for the file will revert to "default" policy.
+
NUMA memory allocation policies have optional flags that can be used in
conjunction with their modes. These optional flags can be specified
when tmpfs is mounted by appending them to the mode before the NodeList.
See Documentation/vm/numa_memory_policy.txt for a list of all available
-memory allocation policy mode flags.
+memory allocation policy mode flags and their effect on memory policy.
=static is equivalent to MPOL_F_STATIC_NODES
=relative is equivalent to MPOL_F_RELATIVE_NODES
@@ -134,3 +144,5 @@ Author:
Christoph Rohland <cr@sap.com>, 1.12.01
Updated:
Hugh Dickins, 4 June 2007
+Updated:
+ KOSAKI Motohiro, 16 Mar 2010
diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt
index eed520fd0c8..ead764b2728 100644
--- a/Documentation/filesystems/vfat.txt
+++ b/Documentation/filesystems/vfat.txt
@@ -165,7 +165,8 @@ TEST SUITE
If you plan to make any modifications to the vfat filesystem, please
get the test suite that comes with the vfat distribution at
- http://bmrc.berkeley.edu/people/chaffee/vfat.html
+ http://web.archive.org/web/*/http://bmrc.berkeley.edu/
+ people/chaffee/vfat.html
This tests quite a few parts of the vfat filesystem and additional
tests for new features or untested features would be appreciated.
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index 3de2f32edd9..ed7e5efc06d 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -72,7 +72,7 @@ structure (this is the kernel-side implementation of file
descriptors). The freshly allocated file structure is initialized with
a pointer to the dentry and a set of file operation member functions.
These are taken from the inode data. The open() file method is then
-called so the specific filesystem implementation can do it's work. You
+called so the specific filesystem implementation can do its work. You
can see that this is another switch performed by the VFS. The file
structure is placed into the file descriptor table for the process.
@@ -401,11 +401,16 @@ otherwise noted.
started might not be in the page cache at the end of the
walk).
- truncate: called by the VFS to change the size of a file. The
+ truncate: Deprecated. This will not be called if ->setsize is defined.
+ Called by the VFS to change the size of a file. The
i_size field of the inode is set to the desired size by the
VFS before this method is called. This method is called by
the truncate(2) system call and related functionality.
+ Note: ->truncate and vmtruncate are deprecated. Do not add new
+ instances/calls of these. Filesystems should be converted to do their
+ truncate sequence via ->setattr().
+
permission: called by the VFS to check for access rights on a POSIX-like
filesystem.
@@ -722,14 +727,13 @@ struct file_operations {
ssize_t (*aio_write) (struct kiocb *, const struct iovec *, unsigned long, loff_t);
int (*readdir) (struct file *, void *, filldir_t);
unsigned int (*poll) (struct file *, struct poll_table_struct *);
- int (*ioctl) (struct inode *, struct file *, unsigned int, unsigned long);
long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
int (*mmap) (struct file *, struct vm_area_struct *);
int (*open) (struct inode *, struct file *);
int (*flush) (struct file *);
int (*release) (struct inode *, struct file *);
- int (*fsync) (struct file *, struct dentry *, int datasync);
+ int (*fsync) (struct file *, int datasync);
int (*aio_fsync) (struct kiocb *, int datasync);
int (*fasync) (int, struct file *, int);
int (*lock) (struct file *, int, struct file_lock *);
@@ -763,10 +767,7 @@ otherwise noted.
activity on this file and (optionally) go to sleep until there
is activity. Called by the select(2) and poll(2) system calls
- ioctl: called by the ioctl(2) system call
-
- unlocked_ioctl: called by the ioctl(2) system call. Filesystems that do not
- require the BKL should use this method instead of the ioctl() above.
+ unlocked_ioctl: called by the ioctl(2) system call.
compat_ioctl: called by the ioctl(2) system call when 32 bit system calls
are used on 64 bit kernels.
diff --git a/Documentation/filesystems/xfs-delayed-logging-design.txt b/Documentation/filesystems/xfs-delayed-logging-design.txt
new file mode 100644
index 00000000000..96d0df28bed
--- /dev/null
+++ b/Documentation/filesystems/xfs-delayed-logging-design.txt
@@ -0,0 +1,811 @@
+XFS Delayed Logging Design
+--------------------------
+
+Introduction to Re-logging in XFS
+---------------------------------
+
+XFS logging is a combination of logical and physical logging. Some objects,
+such as inodes and dquots, are logged in logical format where the details
+logged are made up of the changes to in-core structures rather than on-disk
+structures. Other objects - typically buffers - have their physical changes
+logged. The reason for these differences is to reduce the amount of log space
+required for objects that are frequently logged. Some parts of inodes are more
+frequently logged than others, and inodes are typically more frequently logged
+than any other object (except maybe the superblock buffer) so keeping the
+amount of metadata logged low is of prime importance.
+
+The reason that this is such a concern is that XFS allows multiple separate
+modifications to a single object to be carried in the log at any given time.
+This allows the log to avoid needing to flush each change to disk before
+recording a new change to the object. XFS does this via a method called
+"re-logging". Conceptually, this is quite simple - all it requires is that any
+new change to the object is recorded with a *new copy* of all the existing
+changes in the new transaction that is written to the log.
+
+That is, if we have a sequence of changes A through to F, and the object was
+written to disk after change D, we would see in the log the following series
+of transactions, their contents and the log sequence number (LSN) of the
+transaction:
+
+ Transaction Contents LSN
+ A A X
+ B A+B X+n
+ C A+B+C X+n+m
+ D A+B+C+D X+n+m+o
+ <object written to disk>
+ E E Y (> X+n+m+o)
+ F E+F Yٍ+p
+
+In other words, each time an object is relogged, the new transaction contains
+the aggregation of all the previous changes currently held only in the log.
+
+This relogging technique also allows objects to be moved forward in the log so
+that an object being relogged does not prevent the tail of the log from ever
+moving forward. This can be seen in the table above by the changing
+(increasing) LSN of each subsquent transaction - the LSN is effectively a
+direct encoding of the location in the log of the transaction.
+
+This relogging is also used to implement long-running, multiple-commit
+transactions. These transaction are known as rolling transactions, and require
+a special log reservation known as a permanent transaction reservation. A
+typical example of a rolling transaction is the removal of extents from an
+inode which can only be done at a rate of two extents per transaction because
+of reservation size limitations. Hence a rolling extent removal transaction
+keeps relogging the inode and btree buffers as they get modified in each
+removal operation. This keeps them moving forward in the log as the operation
+progresses, ensuring that current operation never gets blocked by itself if the
+log wraps around.
+
+Hence it can be seen that the relogging operation is fundamental to the correct
+working of the XFS journalling subsystem. From the above description, most
+people should be able to see why the XFS metadata operations writes so much to
+the log - repeated operations to the same objects write the same changes to
+the log over and over again. Worse is the fact that objects tend to get
+dirtier as they get relogged, so each subsequent transaction is writing more
+metadata into the log.
+
+Another feature of the XFS transaction subsystem is that most transactions are
+asynchronous. That is, they don't commit to disk until either a log buffer is
+filled (a log buffer can hold multiple transactions) or a synchronous operation
+forces the log buffers holding the transactions to disk. This means that XFS is
+doing aggregation of transactions in memory - batching them, if you like - to
+minimise the impact of the log IO on transaction throughput.
+
+The limitation on asynchronous transaction throughput is the number and size of
+log buffers made available by the log manager. By default there are 8 log
+buffers available and the size of each is 32kB - the size can be increased up
+to 256kB by use of a mount option.
+
+Effectively, this gives us the maximum bound of outstanding metadata changes
+that can be made to the filesystem at any point in time - if all the log
+buffers are full and under IO, then no more transactions can be committed until
+the current batch completes. It is now common for a single current CPU core to
+be to able to issue enough transactions to keep the log buffers full and under
+IO permanently. Hence the XFS journalling subsystem can be considered to be IO
+bound.
+
+Delayed Logging: Concepts
+-------------------------
+
+The key thing to note about the asynchronous logging combined with the
+relogging technique XFS uses is that we can be relogging changed objects
+multiple times before they are committed to disk in the log buffers. If we
+return to the previous relogging example, it is entirely possible that
+transactions A through D are committed to disk in the same log buffer.
+
+That is, a single log buffer may contain multiple copies of the same object,
+but only one of those copies needs to be there - the last one "D", as it
+contains all the changes from the previous changes. In other words, we have one
+necessary copy in the log buffer, and three stale copies that are simply
+wasting space. When we are doing repeated operations on the same set of
+objects, these "stale objects" can be over 90% of the space used in the log
+buffers. It is clear that reducing the number of stale objects written to the
+log would greatly reduce the amount of metadata we write to the log, and this
+is the fundamental goal of delayed logging.
+
+From a conceptual point of view, XFS is already doing relogging in memory (where
+memory == log buffer), only it is doing it extremely inefficiently. It is using
+logical to physical formatting to do the relogging because there is no
+infrastructure to keep track of logical changes in memory prior to physically
+formatting the changes in a transaction to the log buffer. Hence we cannot avoid
+accumulating stale objects in the log buffers.
+
+Delayed logging is the name we've given to keeping and tracking transactional
+changes to objects in memory outside the log buffer infrastructure. Because of
+the relogging concept fundamental to the XFS journalling subsystem, this is
+actually relatively easy to do - all the changes to logged items are already
+tracked in the current infrastructure. The big problem is how to accumulate
+them and get them to the log in a consistent, recoverable manner.
+Describing the problems and how they have been solved is the focus of this
+document.
+
+One of the key changes that delayed logging makes to the operation of the
+journalling subsystem is that it disassociates the amount of outstanding
+metadata changes from the size and number of log buffers available. In other
+words, instead of there only being a maximum of 2MB of transaction changes not
+written to the log at any point in time, there may be a much greater amount
+being accumulated in memory. Hence the potential for loss of metadata on a
+crash is much greater than for the existing logging mechanism.
+
+It should be noted that this does not change the guarantee that log recovery
+will result in a consistent filesystem. What it does mean is that as far as the
+recovered filesystem is concerned, there may be many thousands of transactions
+that simply did not occur as a result of the crash. This makes it even more
+important that applications that care about their data use fsync() where they
+need to ensure application level data integrity is maintained.
+
+It should be noted that delayed logging is not an innovative new concept that
+warrants rigorous proofs to determine whether it is correct or not. The method
+of accumulating changes in memory for some period before writing them to the
+log is used effectively in many filesystems including ext3 and ext4. Hence
+no time is spent in this document trying to convince the reader that the
+concept is sound. Instead it is simply considered a "solved problem" and as
+such implementing it in XFS is purely an exercise in software engineering.
+
+The fundamental requirements for delayed logging in XFS are simple:
+
+ 1. Reduce the amount of metadata written to the log by at least
+ an order of magnitude.
+ 2. Supply sufficient statistics to validate Requirement #1.
+ 3. Supply sufficient new tracing infrastructure to be able to debug
+ problems with the new code.
+ 4. No on-disk format change (metadata or log format).
+ 5. Enable and disable with a mount option.
+ 6. No performance regressions for synchronous transaction workloads.
+
+Delayed Logging: Design
+-----------------------
+
+Storing Changes
+
+The problem with accumulating changes at a logical level (i.e. just using the
+existing log item dirty region tracking) is that when it comes to writing the
+changes to the log buffers, we need to ensure that the object we are formatting
+is not changing while we do this. This requires locking the object to prevent
+concurrent modification. Hence flushing the logical changes to the log would
+require us to lock every object, format them, and then unlock them again.
+
+This introduces lots of scope for deadlocks with transactions that are already
+running. For example, a transaction has object A locked and modified, but needs
+the delayed logging tracking lock to commit the transaction. However, the
+flushing thread has the delayed logging tracking lock already held, and is
+trying to get the lock on object A to flush it to the log buffer. This appears
+to be an unsolvable deadlock condition, and it was solving this problem that
+was the barrier to implementing delayed logging for so long.
+
+The solution is relatively simple - it just took a long time to recognise it.
+Put simply, the current logging code formats the changes to each item into an
+vector array that points to the changed regions in the item. The log write code
+simply copies the memory these vectors point to into the log buffer during
+transaction commit while the item is locked in the transaction. Instead of
+using the log buffer as the destination of the formatting code, we can use an
+allocated memory buffer big enough to fit the formatted vector.
+
+If we then copy the vector into the memory buffer and rewrite the vector to
+point to the memory buffer rather than the object itself, we now have a copy of
+the changes in a format that is compatible with the log buffer writing code.
+that does not require us to lock the item to access. This formatting and
+rewriting can all be done while the object is locked during transaction commit,
+resulting in a vector that is transactionally consistent and can be accessed
+without needing to lock the owning item.
+
+Hence we avoid the need to lock items when we need to flush outstanding
+asynchronous transactions to the log. The differences between the existing
+formatting method and the delayed logging formatting can be seen in the
+diagram below.
+
+Current format log vector:
+
+Object +---------------------------------------------+
+Vector 1 +----+
+Vector 2 +----+
+Vector 3 +----------+
+
+After formatting:
+
+Log Buffer +-V1-+-V2-+----V3----+
+
+Delayed logging vector:
+
+Object +---------------------------------------------+
+Vector 1 +----+
+Vector 2 +----+
+Vector 3 +----------+
+
+After formatting:
+
+Memory Buffer +-V1-+-V2-+----V3----+
+Vector 1 +----+
+Vector 2 +----+
+Vector 3 +----------+
+
+The memory buffer and associated vector need to be passed as a single object,
+but still need to be associated with the parent object so if the object is
+relogged we can replace the current memory buffer with a new memory buffer that
+contains the latest changes.
+
+The reason for keeping the vector around after we've formatted the memory
+buffer is to support splitting vectors across log buffer boundaries correctly.
+If we don't keep the vector around, we do not know where the region boundaries
+are in the item, so we'd need a new encapsulation method for regions in the log
+buffer writing (i.e. double encapsulation). This would be an on-disk format
+change and as such is not desirable. It also means we'd have to write the log
+region headers in the formatting stage, which is problematic as there is per
+region state that needs to be placed into the headers during the log write.
+
+Hence we need to keep the vector, but by attaching the memory buffer to it and
+rewriting the vector addresses to point at the memory buffer we end up with a
+self-describing object that can be passed to the log buffer write code to be
+handled in exactly the same manner as the existing log vectors are handled.
+Hence we avoid needing a new on-disk format to handle items that have been
+relogged in memory.
+
+
+Tracking Changes
+
+Now that we can record transactional changes in memory in a form that allows
+them to be used without limitations, we need to be able to track and accumulate
+them so that they can be written to the log at some later point in time. The
+log item is the natural place to store this vector and buffer, and also makes sense
+to be the object that is used to track committed objects as it will always
+exist once the object has been included in a transaction.
+
+The log item is already used to track the log items that have been written to
+the log but not yet written to disk. Such log items are considered "active"
+and as such are stored in the Active Item List (AIL) which is a LSN-ordered
+double linked list. Items are inserted into this list during log buffer IO
+completion, after which they are unpinned and can be written to disk. An object
+that is in the AIL can be relogged, which causes the object to be pinned again
+and then moved forward in the AIL when the log buffer IO completes for that
+transaction.
+
+Essentially, this shows that an item that is in the AIL can still be modified
+and relogged, so any tracking must be separate to the AIL infrastructure. As
+such, we cannot reuse the AIL list pointers for tracking committed items, nor
+can we store state in any field that is protected by the AIL lock. Hence the
+committed item tracking needs it's own locks, lists and state fields in the log
+item.
+
+Similar to the AIL, tracking of committed items is done through a new list
+called the Committed Item List (CIL). The list tracks log items that have been
+committed and have formatted memory buffers attached to them. It tracks objects
+in transaction commit order, so when an object is relogged it is removed from
+it's place in the list and re-inserted at the tail. This is entirely arbitrary
+and done to make it easy for debugging - the last items in the list are the
+ones that are most recently modified. Ordering of the CIL is not necessary for
+transactional integrity (as discussed in the next section) so the ordering is
+done for convenience/sanity of the developers.
+
+
+Delayed Logging: Checkpoints
+
+When we have a log synchronisation event, commonly known as a "log force",
+all the items in the CIL must be written into the log via the log buffers.
+We need to write these items in the order that they exist in the CIL, and they
+need to be written as an atomic transaction. The need for all the objects to be
+written as an atomic transaction comes from the requirements of relogging and
+log replay - all the changes in all the objects in a given transaction must
+either be completely replayed during log recovery, or not replayed at all. If
+a transaction is not replayed because it is not complete in the log, then
+no later transactions should be replayed, either.
+
+To fulfill this requirement, we need to write the entire CIL in a single log
+transaction. Fortunately, the XFS log code has no fixed limit on the size of a
+transaction, nor does the log replay code. The only fundamental limit is that
+the transaction cannot be larger than just under half the size of the log. The
+reason for this limit is that to find the head and tail of the log, there must
+be at least one complete transaction in the log at any given time. If a
+transaction is larger than half the log, then there is the possibility that a
+crash during the write of a such a transaction could partially overwrite the
+only complete previous transaction in the log. This will result in a recovery
+failure and an inconsistent filesystem and hence we must enforce the maximum
+size of a checkpoint to be slightly less than a half the log.
+
+Apart from this size requirement, a checkpoint transaction looks no different
+to any other transaction - it contains a transaction header, a series of
+formatted log items and a commit record at the tail. From a recovery
+perspective, the checkpoint transaction is also no different - just a lot
+bigger with a lot more items in it. The worst case effect of this is that we
+might need to tune the recovery transaction object hash size.
+
+Because the checkpoint is just another transaction and all the changes to log
+items are stored as log vectors, we can use the existing log buffer writing
+code to write the changes into the log. To do this efficiently, we need to
+minimise the time we hold the CIL locked while writing the checkpoint
+transaction. The current log write code enables us to do this easily with the
+way it separates the writing of the transaction contents (the log vectors) from
+the transaction commit record, but tracking this requires us to have a
+per-checkpoint context that travels through the log write process through to
+checkpoint completion.
+
+Hence a checkpoint has a context that tracks the state of the current
+checkpoint from initiation to checkpoint completion. A new context is initiated
+at the same time a checkpoint transaction is started. That is, when we remove
+all the current items from the CIL during a checkpoint operation, we move all
+those changes into the current checkpoint context. We then initialise a new
+context and attach that to the CIL for aggregation of new transactions.
+
+This allows us to unlock the CIL immediately after transfer of all the
+committed items and effectively allow new transactions to be issued while we
+are formatting the checkpoint into the log. It also allows concurrent
+checkpoints to be written into the log buffers in the case of log force heavy
+workloads, just like the existing transaction commit code does. This, however,
+requires that we strictly order the commit records in the log so that
+checkpoint sequence order is maintained during log replay.
+
+To ensure that we can be writing an item into a checkpoint transaction at
+the same time another transaction modifies the item and inserts the log item
+into the new CIL, then checkpoint transaction commit code cannot use log items
+to store the list of log vectors that need to be written into the transaction.
+Hence log vectors need to be able to be chained together to allow them to be
+detatched from the log items. That is, when the CIL is flushed the memory
+buffer and log vector attached to each log item needs to be attached to the
+checkpoint context so that the log item can be released. In diagrammatic form,
+the CIL would look like this before the flush:
+
+ CIL Head
+ |
+ V
+ Log Item <-> log vector 1 -> memory buffer
+ | -> vector array
+ V
+ Log Item <-> log vector 2 -> memory buffer
+ | -> vector array
+ V
+ ......
+ |
+ V
+ Log Item <-> log vector N-1 -> memory buffer
+ | -> vector array
+ V
+ Log Item <-> log vector N -> memory buffer
+ -> vector array
+
+And after the flush the CIL head is empty, and the checkpoint context log
+vector list would look like:
+
+ Checkpoint Context
+ |
+ V
+ log vector 1 -> memory buffer
+ | -> vector array
+ | -> Log Item
+ V
+ log vector 2 -> memory buffer
+ | -> vector array
+ | -> Log Item
+ V
+ ......
+ |
+ V
+ log vector N-1 -> memory buffer
+ | -> vector array
+ | -> Log Item
+ V
+ log vector N -> memory buffer
+ -> vector array
+ -> Log Item
+
+Once this transfer is done, the CIL can be unlocked and new transactions can
+start, while the checkpoint flush code works over the log vector chain to
+commit the checkpoint.
+
+Once the checkpoint is written into the log buffers, the checkpoint context is
+attached to the log buffer that the commit record was written to along with a
+completion callback. Log IO completion will call that callback, which can then
+run transaction committed processing for the log items (i.e. insert into AIL
+and unpin) in the log vector chain and then free the log vector chain and
+checkpoint context.
+
+Discussion Point: I am uncertain as to whether the log item is the most
+efficient way to track vectors, even though it seems like the natural way to do
+it. The fact that we walk the log items (in the CIL) just to chain the log
+vectors and break the link between the log item and the log vector means that
+we take a cache line hit for the log item list modification, then another for
+the log vector chaining. If we track by the log vectors, then we only need to
+break the link between the log item and the log vector, which means we should
+dirty only the log item cachelines. Normally I wouldn't be concerned about one
+vs two dirty cachelines except for the fact I've seen upwards of 80,000 log
+vectors in one checkpoint transaction. I'd guess this is a "measure and
+compare" situation that can be done after a working and reviewed implementation
+is in the dev tree....
+
+Delayed Logging: Checkpoint Sequencing
+
+One of the key aspects of the XFS transaction subsystem is that it tags
+committed transactions with the log sequence number of the transaction commit.
+This allows transactions to be issued asynchronously even though there may be
+future operations that cannot be completed until that transaction is fully
+committed to the log. In the rare case that a dependent operation occurs (e.g.
+re-using a freed metadata extent for a data extent), a special, optimised log
+force can be issued to force the dependent transaction to disk immediately.
+
+To do this, transactions need to record the LSN of the commit record of the
+transaction. This LSN comes directly from the log buffer the transaction is
+written into. While this works just fine for the existing transaction
+mechanism, it does not work for delayed logging because transactions are not
+written directly into the log buffers. Hence some other method of sequencing
+transactions is required.
+
+As discussed in the checkpoint section, delayed logging uses per-checkpoint
+contexts, and as such it is simple to assign a sequence number to each
+checkpoint. Because the switching of checkpoint contexts must be done
+atomically, it is simple to ensure that each new context has a monotonically
+increasing sequence number assigned to it without the need for an external
+atomic counter - we can just take the current context sequence number and add
+one to it for the new context.
+
+Then, instead of assigning a log buffer LSN to the transaction commit LSN
+during the commit, we can assign the current checkpoint sequence. This allows
+operations that track transactions that have not yet completed know what
+checkpoint sequence needs to be committed before they can continue. As a
+result, the code that forces the log to a specific LSN now needs to ensure that
+the log forces to a specific checkpoint.
+
+To ensure that we can do this, we need to track all the checkpoint contexts
+that are currently committing to the log. When we flush a checkpoint, the
+context gets added to a "committing" list which can be searched. When a
+checkpoint commit completes, it is removed from the committing list. Because
+the checkpoint context records the LSN of the commit record for the checkpoint,
+we can also wait on the log buffer that contains the commit record, thereby
+using the existing log force mechanisms to execute synchronous forces.
+
+It should be noted that the synchronous forces may need to be extended with
+mitigation algorithms similar to the current log buffer code to allow
+aggregation of multiple synchronous transactions if there are already
+synchronous transactions being flushed. Investigation of the performance of the
+current design is needed before making any decisions here.
+
+The main concern with log forces is to ensure that all the previous checkpoints
+are also committed to disk before the one we need to wait for. Therefore we
+need to check that all the prior contexts in the committing list are also
+complete before waiting on the one we need to complete. We do this
+synchronisation in the log force code so that we don't need to wait anywhere
+else for such serialisation - it only matters when we do a log force.
+
+The only remaining complexity is that a log force now also has to handle the
+case where the forcing sequence number is the same as the current context. That
+is, we need to flush the CIL and potentially wait for it to complete. This is a
+simple addition to the existing log forcing code to check the sequence numbers
+and push if required. Indeed, placing the current sequence checkpoint flush in
+the log force code enables the current mechanism for issuing synchronous
+transactions to remain untouched (i.e. commit an asynchronous transaction, then
+force the log at the LSN of that transaction) and so the higher level code
+behaves the same regardless of whether delayed logging is being used or not.
+
+Delayed Logging: Checkpoint Log Space Accounting
+
+The big issue for a checkpoint transaction is the log space reservation for the
+transaction. We don't know how big a checkpoint transaction is going to be
+ahead of time, nor how many log buffers it will take to write out, nor the
+number of split log vector regions are going to be used. We can track the
+amount of log space required as we add items to the commit item list, but we
+still need to reserve the space in the log for the checkpoint.
+
+A typical transaction reserves enough space in the log for the worst case space
+usage of the transaction. The reservation accounts for log record headers,
+transaction and region headers, headers for split regions, buffer tail padding,
+etc. as well as the actual space for all the changed metadata in the
+transaction. While some of this is fixed overhead, much of it is dependent on
+the size of the transaction and the number of regions being logged (the number
+of log vectors in the transaction).
+
+An example of the differences would be logging directory changes versus logging
+inode changes. If you modify lots of inode cores (e.g. chmod -R g+w *), then
+there are lots of transactions that only contain an inode core and an inode log
+format structure. That is, two vectors totaling roughly 150 bytes. If we modify
+10,000 inodes, we have about 1.5MB of metadata to write in 20,000 vectors. Each
+vector is 12 bytes, so the total to be logged is approximately 1.75MB. In
+comparison, if we are logging full directory buffers, they are typically 4KB
+each, so we in 1.5MB of directory buffers we'd have roughly 400 buffers and a
+buffer format structure for each buffer - roughly 800 vectors or 1.51MB total
+space. From this, it should be obvious that a static log space reservation is
+not particularly flexible and is difficult to select the "optimal value" for
+all workloads.
+
+Further, if we are going to use a static reservation, which bit of the entire
+reservation does it cover? We account for space used by the transaction
+reservation by tracking the space currently used by the object in the CIL and
+then calculating the increase or decrease in space used as the object is
+relogged. This allows for a checkpoint reservation to only have to account for
+log buffer metadata used such as log header records.
+
+However, even using a static reservation for just the log metadata is
+problematic. Typically log record headers use at least 16KB of log space per
+1MB of log space consumed (512 bytes per 32k) and the reservation needs to be
+large enough to handle arbitrary sized checkpoint transactions. This
+reservation needs to be made before the checkpoint is started, and we need to
+be able to reserve the space without sleeping. For a 8MB checkpoint, we need a
+reservation of around 150KB, which is a non-trivial amount of space.
+
+A static reservation needs to manipulate the log grant counters - we can take a
+permanent reservation on the space, but we still need to make sure we refresh
+the write reservation (the actual space available to the transaction) after
+every checkpoint transaction completion. Unfortunately, if this space is not
+available when required, then the regrant code will sleep waiting for it.
+
+The problem with this is that it can lead to deadlocks as we may need to commit
+checkpoints to be able to free up log space (refer back to the description of
+rolling transactions for an example of this). Hence we *must* always have
+space available in the log if we are to use static reservations, and that is
+very difficult and complex to arrange. It is possible to do, but there is a
+simpler way.
+
+The simpler way of doing this is tracking the entire log space used by the
+items in the CIL and using this to dynamically calculate the amount of log
+space required by the log metadata. If this log metadata space changes as a
+result of a transaction commit inserting a new memory buffer into the CIL, then
+the difference in space required is removed from the transaction that causes
+the change. Transactions at this level will *always* have enough space
+available in their reservation for this as they have already reserved the
+maximal amount of log metadata space they require, and such a delta reservation
+will always be less than or equal to the maximal amount in the reservation.
+
+Hence we can grow the checkpoint transaction reservation dynamically as items
+are added to the CIL and avoid the need for reserving and regranting log space
+up front. This avoids deadlocks and removes a blocking point from the
+checkpoint flush code.
+
+As mentioned early, transactions can't grow to more than half the size of the
+log. Hence as part of the reservation growing, we need to also check the size
+of the reservation against the maximum allowed transaction size. If we reach
+the maximum threshold, we need to push the CIL to the log. This is effectively
+a "background flush" and is done on demand. This is identical to
+a CIL push triggered by a log force, only that there is no waiting for the
+checkpoint commit to complete. This background push is checked and executed by
+transaction commit code.
+
+If the transaction subsystem goes idle while we still have items in the CIL,
+they will be flushed by the periodic log force issued by the xfssyncd. This log
+force will push the CIL to disk, and if the transaction subsystem stays idle,
+allow the idle log to be covered (effectively marked clean) in exactly the same
+manner that is done for the existing logging method. A discussion point is
+whether this log force needs to be done more frequently than the current rate
+which is once every 30s.
+
+
+Delayed Logging: Log Item Pinning
+
+Currently log items are pinned during transaction commit while the items are
+still locked. This happens just after the items are formatted, though it could
+be done any time before the items are unlocked. The result of this mechanism is
+that items get pinned once for every transaction that is committed to the log
+buffers. Hence items that are relogged in the log buffers will have a pin count
+for every outstanding transaction they were dirtied in. When each of these
+transactions is completed, they will unpin the item once. As a result, the item
+only becomes unpinned when all the transactions complete and there are no
+pending transactions. Thus the pinning and unpinning of a log item is symmetric
+as there is a 1:1 relationship with transaction commit and log item completion.
+
+For delayed logging, however, we have an assymetric transaction commit to
+completion relationship. Every time an object is relogged in the CIL it goes
+through the commit process without a corresponding completion being registered.
+That is, we now have a many-to-one relationship between transaction commit and
+log item completion. The result of this is that pinning and unpinning of the
+log items becomes unbalanced if we retain the "pin on transaction commit, unpin
+on transaction completion" model.
+
+To keep pin/unpin symmetry, the algorithm needs to change to a "pin on
+insertion into the CIL, unpin on checkpoint completion". In other words, the
+pinning and unpinning becomes symmetric around a checkpoint context. We have to
+pin the object the first time it is inserted into the CIL - if it is already in
+the CIL during a transaction commit, then we do not pin it again. Because there
+can be multiple outstanding checkpoint contexts, we can still see elevated pin
+counts, but as each checkpoint completes the pin count will retain the correct
+value according to it's context.
+
+Just to make matters more slightly more complex, this checkpoint level context
+for the pin count means that the pinning of an item must take place under the
+CIL commit/flush lock. If we pin the object outside this lock, we cannot
+guarantee which context the pin count is associated with. This is because of
+the fact pinning the item is dependent on whether the item is present in the
+current CIL or not. If we don't pin the CIL first before we check and pin the
+object, we have a race with CIL being flushed between the check and the pin
+(or not pinning, as the case may be). Hence we must hold the CIL flush/commit
+lock to guarantee that we pin the items correctly.
+
+Delayed Logging: Concurrent Scalability
+
+A fundamental requirement for the CIL is that accesses through transaction
+commits must scale to many concurrent commits. The current transaction commit
+code does not break down even when there are transactions coming from 2048
+processors at once. The current transaction code does not go any faster than if
+there was only one CPU using it, but it does not slow down either.
+
+As a result, the delayed logging transaction commit code needs to be designed
+for concurrency from the ground up. It is obvious that there are serialisation
+points in the design - the three important ones are:
+
+ 1. Locking out new transaction commits while flushing the CIL
+ 2. Adding items to the CIL and updating item space accounting
+ 3. Checkpoint commit ordering
+
+Looking at the transaction commit and CIL flushing interactions, it is clear
+that we have a many-to-one interaction here. That is, the only restriction on
+the number of concurrent transactions that can be trying to commit at once is
+the amount of space available in the log for their reservations. The practical
+limit here is in the order of several hundred concurrent transactions for a
+128MB log, which means that it is generally one per CPU in a machine.
+
+The amount of time a transaction commit needs to hold out a flush is a
+relatively long period of time - the pinning of log items needs to be done
+while we are holding out a CIL flush, so at the moment that means it is held
+across the formatting of the objects into memory buffers (i.e. while memcpy()s
+are in progress). Ultimately a two pass algorithm where the formatting is done
+separately to the pinning of objects could be used to reduce the hold time of
+the transaction commit side.
+
+Because of the number of potential transaction commit side holders, the lock
+really needs to be a sleeping lock - if the CIL flush takes the lock, we do not
+want every other CPU in the machine spinning on the CIL lock. Given that
+flushing the CIL could involve walking a list of tens of thousands of log
+items, it will get held for a significant time and so spin contention is a
+significant concern. Preventing lots of CPUs spinning doing nothing is the
+main reason for choosing a sleeping lock even though nothing in either the
+transaction commit or CIL flush side sleeps with the lock held.
+
+It should also be noted that CIL flushing is also a relatively rare operation
+compared to transaction commit for asynchronous transaction workloads - only
+time will tell if using a read-write semaphore for exclusion will limit
+transaction commit concurrency due to cache line bouncing of the lock on the
+read side.
+
+The second serialisation point is on the transaction commit side where items
+are inserted into the CIL. Because transactions can enter this code
+concurrently, the CIL needs to be protected separately from the above
+commit/flush exclusion. It also needs to be an exclusive lock but it is only
+held for a very short time and so a spin lock is appropriate here. It is
+possible that this lock will become a contention point, but given the short
+hold time once per transaction I think that contention is unlikely.
+
+The final serialisation point is the checkpoint commit record ordering code
+that is run as part of the checkpoint commit and log force sequencing. The code
+path that triggers a CIL flush (i.e. whatever triggers the log force) will enter
+an ordering loop after writing all the log vectors into the log buffers but
+before writing the commit record. This loop walks the list of committing
+checkpoints and needs to block waiting for checkpoints to complete their commit
+record write. As a result it needs a lock and a wait variable. Log force
+sequencing also requires the same lock, list walk, and blocking mechanism to
+ensure completion of checkpoints.
+
+These two sequencing operations can use the mechanism even though the
+events they are waiting for are different. The checkpoint commit record
+sequencing needs to wait until checkpoint contexts contain a commit LSN
+(obtained through completion of a commit record write) while log force
+sequencing needs to wait until previous checkpoint contexts are removed from
+the committing list (i.e. they've completed). A simple wait variable and
+broadcast wakeups (thundering herds) has been used to implement these two
+serialisation queues. They use the same lock as the CIL, too. If we see too
+much contention on the CIL lock, or too many context switches as a result of
+the broadcast wakeups these operations can be put under a new spinlock and
+given separate wait lists to reduce lock contention and the number of processes
+woken by the wrong event.
+
+
+Lifecycle Changes
+
+The existing log item life cycle is as follows:
+
+ 1. Transaction allocate
+ 2. Transaction reserve
+ 3. Lock item
+ 4. Join item to transaction
+ If not already attached,
+ Allocate log item
+ Attach log item to owner item
+ Attach log item to transaction
+ 5. Modify item
+ Record modifications in log item
+ 6. Transaction commit
+ Pin item in memory
+ Format item into log buffer
+ Write commit LSN into transaction
+ Unlock item
+ Attach transaction to log buffer
+
+ <log buffer IO dispatched>
+ <log buffer IO completes>
+
+ 7. Transaction completion
+ Mark log item committed
+ Insert log item into AIL
+ Write commit LSN into log item
+ Unpin log item
+ 8. AIL traversal
+ Lock item
+ Mark log item clean
+ Flush item to disk
+
+ <item IO completion>
+
+ 9. Log item removed from AIL
+ Moves log tail
+ Item unlocked
+
+Essentially, steps 1-6 operate independently from step 7, which is also
+independent of steps 8-9. An item can be locked in steps 1-6 or steps 8-9
+at the same time step 7 is occurring, but only steps 1-6 or 8-9 can occur
+at the same time. If the log item is in the AIL or between steps 6 and 7
+and steps 1-6 are re-entered, then the item is relogged. Only when steps 8-9
+are entered and completed is the object considered clean.
+
+With delayed logging, there are new steps inserted into the life cycle:
+
+ 1. Transaction allocate
+ 2. Transaction reserve
+ 3. Lock item
+ 4. Join item to transaction
+ If not already attached,
+ Allocate log item
+ Attach log item to owner item
+ Attach log item to transaction
+ 5. Modify item
+ Record modifications in log item
+ 6. Transaction commit
+ Pin item in memory if not pinned in CIL
+ Format item into log vector + buffer
+ Attach log vector and buffer to log item
+ Insert log item into CIL
+ Write CIL context sequence into transaction
+ Unlock item
+
+ <next log force>
+
+ 7. CIL push
+ lock CIL flush
+ Chain log vectors and buffers together
+ Remove items from CIL
+ unlock CIL flush
+ write log vectors into log
+ sequence commit records
+ attach checkpoint context to log buffer
+
+ <log buffer IO dispatched>
+ <log buffer IO completes>
+
+ 8. Checkpoint completion
+ Mark log item committed
+ Insert item into AIL
+ Write commit LSN into log item
+ Unpin log item
+ 9. AIL traversal
+ Lock item
+ Mark log item clean
+ Flush item to disk
+ <item IO completion>
+ 10. Log item removed from AIL
+ Moves log tail
+ Item unlocked
+
+From this, it can be seen that the only life cycle differences between the two
+logging methods are in the middle of the life cycle - they still have the same
+beginning and end and execution constraints. The only differences are in the
+commiting of the log items to the log itself and the completion processing.
+Hence delayed logging should not introduce any constraints on log item
+behaviour, allocation or freeing that don't already exist.
+
+As a result of this zero-impact "insertion" of delayed logging infrastructure
+and the design of the internal structures to avoid on disk format changes, we
+can basically switch between delayed logging and the existing mechanism with a
+mount option. Fundamentally, there is no reason why the log manager would not
+be able to swap methods automatically and transparently depending on load
+characteristics, but this should not be necessary if delayed logging works as
+designed.
+
+Roadmap:
+
+2.6.37 Remove experimental tag from mount option
+ => should be roughly 6 months after initial merge
+ => enough time to:
+ => gain confidence and fix problems reported by early
+ adopters (a.k.a. guinea pigs)
+ => address worst performance regressions and undesired
+ behaviours
+ => start tuning/optimising code for parallelism
+ => start tuning/optimising algorithms consuming
+ excessive CPU time
+
+2.6.39 Switch default mount option to use delayed logging
+ => should be roughly 12 months after initial merge
+ => enough time to shake out remaining problems before next round of
+ enterprise distro kernel rebases
diff --git a/Documentation/filesystems/xfs.txt b/Documentation/filesystems/xfs.txt
index 9878f50d6ed..7bff3e4f35d 100644
--- a/Documentation/filesystems/xfs.txt
+++ b/Documentation/filesystems/xfs.txt
@@ -131,17 +131,6 @@ When mounting an XFS filesystem, the following options are accepted.
Don't check for double mounted file systems using the file system uuid.
This is useful to mount LVM snapshot volumes.
- osyncisosync
- Make O_SYNC writes implement true O_SYNC. WITHOUT this option,
- Linux XFS behaves as if an "osyncisdsync" option is used,
- which will make writes to files opened with the O_SYNC flag set
- behave as if the O_DSYNC flag had been used instead.
- This can result in better performance without compromising
- data safety.
- However if this option is not in effect, timestamp updates from
- O_SYNC writes can be lost if the system crashes.
- If timestamp updates are critical, use the osyncisosync option.
-
uquota/usrquota/uqnoenforce/quota
User disk quota accounting enabled, and limits (optionally)
enforced. Refer to xfs_quota(8) for further details.
diff --git a/Documentation/firmware_class/hotplug-script b/Documentation/firmware_class/hotplug-script
index 1990130f2ab..8143a950b60 100644
--- a/Documentation/firmware_class/hotplug-script
+++ b/Documentation/firmware_class/hotplug-script
@@ -6,11 +6,12 @@
HOTPLUG_FW_DIR=/usr/lib/hotplug/firmware/
-echo 1 > /sys/$DEVPATH/loading
-cat $HOTPLUG_FW_DIR/$FIRMWARE > /sys/$DEVPATH/data
-echo 0 > /sys/$DEVPATH/loading
-
-# To cancel the load in case of error:
-#
-# echo -1 > /sys/$DEVPATH/loading
-#
+if [ "$SUBSYSTEM" == "firmware" -a "$ACTION" == "add" ]; then
+ if [ -f $HOTPLUG_FW_DIR/$FIRMWARE ]; then
+ echo 1 > /sys/$DEVPATH/loading
+ cat $HOTPLUG_FW_DIR/$FIRMWARE > /sys/$DEVPATH/data
+ echo 0 > /sys/$DEVPATH/loading
+ else
+ echo -1 > /sys/$DEVPATH/loading
+ fi
+fi
diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index 1866c27eec6..9633da01ff4 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -109,17 +109,19 @@ use numbers 2000-2063 to identify GPIOs in a bank of I2C GPIO expanders.
If you want to initialize a structure with an invalid GPIO number, use
some negative number (perhaps "-EINVAL"); that will never be valid. To
-test if a number could reference a GPIO, you may use this predicate:
+test if such number from such a structure could reference a GPIO, you
+may use this predicate:
int gpio_is_valid(int number);
A number that's not valid will be rejected by calls which may request
or free GPIOs (see below). Other numbers may also be rejected; for
-example, a number might be valid but unused on a given board.
-
-Whether a platform supports multiple GPIO controllers is currently a
-platform-specific implementation issue.
+example, a number might be valid but temporarily unused on a given board.
+Whether a platform supports multiple GPIO controllers is a platform-specific
+implementation issue, as are whether that support can leave "holes" in the space
+of GPIO numbers, and whether new controllers can be added at runtime. Such issues
+can affect things including whether adjacent GPIO numbers are both valid.
Using GPIOs
-----------
@@ -158,10 +160,11 @@ and configure pullups/pulldowns appropriately.)
Spinlock-Safe GPIO access
-------------------------
Most GPIO controllers can be accessed with memory read/write instructions.
-That doesn't need to sleep, and can safely be done from inside IRQ handlers.
-(That includes hardirq contexts on RT kernels.)
+Those don't need to sleep, and can safely be done from inside hard
+(nonthreaded) IRQ handlers and similar contexts.
-Use these calls to access such GPIOs:
+Use the following calls to access such GPIOs,
+for which gpio_cansleep() will always return false (see below):
/* GPIO INPUT: return zero or nonzero */
int gpio_get_value(unsigned gpio);
@@ -210,9 +213,31 @@ To access such GPIOs, a different set of accessors is defined:
/* GPIO OUTPUT, might sleep */
void gpio_set_value_cansleep(unsigned gpio, int value);
-Other than the fact that these calls might sleep, and will not be ignored
-for GPIOs that can't be accessed from IRQ handlers, these calls act the
-same as the spinlock-safe calls.
+
+Accessing such GPIOs requires a context which may sleep, for example
+a threaded IRQ handler, and those accessors must be used instead of
+spinlock-safe accessors without the cansleep() name suffix.
+
+Other than the fact that these accessors might sleep, and will work
+on GPIOs that can't be accessed from hardIRQ handlers, these calls act
+the same as the spinlock-safe calls.
+
+ ** IN ADDITION ** calls to setup and configure such GPIOs must be made
+from contexts which may sleep, since they may need to access the GPIO
+controller chip too: (These setup calls are usually made from board
+setup or driver probe/teardown code, so this is an easy constraint.)
+
+ gpio_direction_input()
+ gpio_direction_output()
+ gpio_request()
+
+## gpio_request_one()
+## gpio_request_array()
+## gpio_free_array()
+
+ gpio_free()
+ gpio_set_debounce()
+
Claiming and Releasing GPIOs
@@ -253,6 +278,70 @@ pin setup (e.g. controlling which pin the GPIO uses, pullup/pulldown).
Also note that it's your responsibility to have stopped using a GPIO
before you free it.
+Considering in most cases GPIOs are actually configured right after they
+are claimed, three additional calls are defined:
+
+ /* request a single GPIO, with initial configuration specified by
+ * 'flags', identical to gpio_request() wrt other arguments and
+ * return value
+ */
+ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label);
+
+ /* request multiple GPIOs in a single call
+ */
+ int gpio_request_array(struct gpio *array, size_t num);
+
+ /* release multiple GPIOs in a single call
+ */
+ void gpio_free_array(struct gpio *array, size_t num);
+
+where 'flags' is currently defined to specify the following properties:
+
+ * GPIOF_DIR_IN - to configure direction as input
+ * GPIOF_DIR_OUT - to configure direction as output
+
+ * GPIOF_INIT_LOW - as output, set initial level to LOW
+ * GPIOF_INIT_HIGH - as output, set initial level to HIGH
+
+since GPIOF_INIT_* are only valid when configured as output, so group valid
+combinations as:
+
+ * GPIOF_IN - configure as input
+ * GPIOF_OUT_INIT_LOW - configured as output, initial level LOW
+ * GPIOF_OUT_INIT_HIGH - configured as output, initial level HIGH
+
+In the future, these flags can be extended to support more properties such
+as open-drain status.
+
+Further more, to ease the claim/release of multiple GPIOs, 'struct gpio' is
+introduced to encapsulate all three fields as:
+
+ struct gpio {
+ unsigned gpio;
+ unsigned long flags;
+ const char *label;
+ };
+
+A typical example of usage:
+
+ static struct gpio leds_gpios[] = {
+ { 32, GPIOF_OUT_INIT_HIGH, "Power LED" }, /* default to ON */
+ { 33, GPIOF_OUT_INIT_LOW, "Green LED" }, /* default to OFF */
+ { 34, GPIOF_OUT_INIT_LOW, "Red LED" }, /* default to OFF */
+ { 35, GPIOF_OUT_INIT_LOW, "Blue LED" }, /* default to OFF */
+ { ... },
+ };
+
+ err = gpio_request_one(31, GPIOF_IN, "Reset Button");
+ if (err)
+ ...
+
+ err = gpio_request_array(leds_gpios, ARRAY_SIZE(leds_gpios));
+ if (err)
+ ...
+
+ gpio_free_array(leds_gpios, ARRAY_SIZE(leds_gpios));
+
GPIOs mapped to IRQs
--------------------
@@ -393,12 +482,16 @@ To support this framework, a platform's Kconfig will "select" either
ARCH_REQUIRE_GPIOLIB or ARCH_WANT_OPTIONAL_GPIOLIB
and arrange that its <asm/gpio.h> includes <asm-generic/gpio.h> and defines
three functions: gpio_get_value(), gpio_set_value(), and gpio_cansleep().
-They may also want to provide a custom value for ARCH_NR_GPIOS.
-ARCH_REQUIRE_GPIOLIB means that the gpio-lib code will always get compiled
+It may also provide a custom value for ARCH_NR_GPIOS, so that it better
+reflects the number of GPIOs in actual use on that platform, without
+wasting static table space. (It should count both built-in/SoC GPIOs and
+also ones on GPIO expanders.
+
+ARCH_REQUIRE_GPIOLIB means that the gpiolib code will always get compiled
into the kernel on that architecture.
-ARCH_WANT_OPTIONAL_GPIOLIB means the gpio-lib code defaults to off and the user
+ARCH_WANT_OPTIONAL_GPIOLIB means the gpiolib code defaults to off and the user
can enable it and build it into the kernel optionally.
If neither of these options are selected, the platform does not support
diff --git a/Documentation/hwmon/abituguru b/Documentation/hwmon/abituguru
index 87ffa0f5ec7..5eb3b9d5f0d 100644
--- a/Documentation/hwmon/abituguru
+++ b/Documentation/hwmon/abituguru
@@ -30,7 +30,7 @@ Supported chips:
bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1
You may also need to specify the fan_sensors option for these boards
fan_sensors=5
- 2) There is a seperate abituguru3 driver for these motherboards,
+ 2) There is a separate abituguru3 driver for these motherboards,
the abituguru (without the 3 !) driver will not work on these
motherboards (and visa versa)!
diff --git a/Documentation/hwmon/adm1026 b/Documentation/hwmon/adm1026
index f4327db2307..d8fabe0c23a 100644
--- a/Documentation/hwmon/adm1026
+++ b/Documentation/hwmon/adm1026
@@ -6,7 +6,7 @@ Supported chips:
Prefix: 'adm1026'
Addresses scanned: I2C 0x2c, 0x2d, 0x2e
Datasheet: Publicly available at the Analog Devices website
- http://www.analog.com/en/prod/0,,766_825_ADM1026,00.html
+ http://www.onsemi.com/PowerSolutions/product.do?id=ADM1026
Authors:
Philip Pokorny <ppokorny@penguincomputing.com> for Penguin Computing
diff --git a/Documentation/hwmon/adt7411 b/Documentation/hwmon/adt7411
new file mode 100644
index 00000000000..1632960f974
--- /dev/null
+++ b/Documentation/hwmon/adt7411
@@ -0,0 +1,42 @@
+Kernel driver adt7411
+=====================
+
+Supported chips:
+ * Analog Devices ADT7411
+ Prefix: 'adt7411'
+ Addresses scanned: 0x48, 0x4a, 0x4b
+ Datasheet: Publicly available at the Analog Devices website
+
+Author: Wolfram Sang (based on adt7470 by Darrick J. Wong)
+
+Description
+-----------
+
+This driver implements support for the Analog Devices ADT7411 chip. There may
+be other chips that implement this interface.
+
+The ADT7411 can use an I2C/SMBus compatible 2-wire interface or an
+SPI-compatible 4-wire interface. It provides a 10-bit analog to digital
+converter which measures 1 temperature, vdd and 8 input voltages. It has an
+internal temperature sensor, but an external one can also be connected (one
+loses 2 inputs then). There are high- and low-limit registers for all inputs.
+
+Check the datasheet for details.
+
+sysfs-Interface
+---------------
+
+in0_input - vdd voltage input
+in[1-8]_input - analog 1-8 input
+temp1_input - temperature input
+
+Besides standard interfaces, this driver adds (0 = off, 1 = on):
+
+ adc_ref_vdd - Use vdd as reference instead of 2.25 V
+ fast_sampling - Sample at 22.5 kHz instead of 1.4 kHz, but drop filters
+ no_average - Turn off averaging over 16 samples
+
+Notes
+-----
+
+SPI, external temperature sensor and limit registers are not supported yet.
diff --git a/Documentation/hwmon/adt7473 b/Documentation/hwmon/adt7473
deleted file mode 100644
index 446612bd1fb..00000000000
--- a/Documentation/hwmon/adt7473
+++ /dev/null
@@ -1,74 +0,0 @@
-Kernel driver adt7473
-======================
-
-Supported chips:
- * Analog Devices ADT7473
- Prefix: 'adt7473'
- Addresses scanned: I2C 0x2C, 0x2D, 0x2E
- Datasheet: Publicly available at the Analog Devices website
-
-Author: Darrick J. Wong
-
-This driver is depreacted, please use the adt7475 driver instead.
-
-Description
------------
-
-This driver implements support for the Analog Devices ADT7473 chip family.
-
-The ADT7473 uses the 2-wire interface compatible with the SMBUS 2.0
-specification. Using an analog to digital converter it measures three (3)
-temperatures and two (2) voltages. It has four (4) 16-bit counters for
-measuring fan speed. There are three (3) PWM outputs that can be used
-to control fan speed.
-
-A sophisticated control system for the PWM outputs is designed into the
-ADT7473 that allows fan speed to be adjusted automatically based on any of the
-three temperature sensors. Each PWM output is individually adjustable and
-programmable. Once configured, the ADT7473 will adjust the PWM outputs in
-response to the measured temperatures without further host intervention.
-This feature can also be disabled for manual control of the PWM's.
-
-Each of the measured inputs (voltage, temperature, fan speed) has
-corresponding high/low limit values. The ADT7473 will signal an ALARM if
-any measured value exceeds either limit.
-
-The ADT7473 samples all inputs continuously. The driver will not read
-the registers more often than once every other second. Further,
-configuration data is only read once per minute.
-
-Special Features
-----------------
-
-The ADT7473 have a 10-bit ADC and can therefore measure temperatures
-with 0.25 degC resolution. Temperature readings can be configured either
-for twos complement format or "Offset 64" format, wherein 63 is subtracted
-from the raw value to get the temperature value.
-
-The Analog Devices datasheet is very detailed and describes a procedure for
-determining an optimal configuration for the automatic PWM control.
-
-Configuration Notes
--------------------
-
-Besides standard interfaces driver adds the following:
-
-* PWM Control
-
-* pwm#_auto_point1_pwm and temp#_auto_point1_temp and
-* pwm#_auto_point2_pwm and temp#_auto_point2_temp -
-
-point1: Set the pwm speed at a lower temperature bound.
-point2: Set the pwm speed at a higher temperature bound.
-
-The ADT7473 will scale the pwm between the lower and higher pwm speed when
-the temperature is between the two temperature boundaries. PWM values range
-from 0 (off) to 255 (full speed). Fan speed will be set to maximum when the
-temperature sensor associated with the PWM control exceeds temp#_max.
-
-Notes
------
-
-The NVIDIA binary driver presents an ADT7473 chip via an on-card i2c bus.
-Unfortunately, they fail to set the i2c adapter class, so this driver may
-fail to find the chip until the nvidia driver is patched.
diff --git a/Documentation/hwmon/asc7621 b/Documentation/hwmon/asc7621
new file mode 100644
index 00000000000..7287be7e1f2
--- /dev/null
+++ b/Documentation/hwmon/asc7621
@@ -0,0 +1,296 @@
+Kernel driver asc7621
+==================
+
+Supported chips:
+ Andigilog aSC7621 and aSC7621a
+ Prefix: 'asc7621'
+ Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+ Datasheet: http://www.fairview5.com/linux/asc7621/asc7621.pdf
+
+Author:
+ George Joseph
+
+Description provided by Dave Pivin @ Andigilog:
+
+Andigilog has both the PECI and pre-PECI versions of the Heceta-6, as
+Intel calls them. Heceta-6e has high frequency PWM and Heceta-6p has
+added PECI and a 4th thermal zone. The Andigilog aSC7611 is the
+Heceta-6e part and aSC7621 is the Heceta-6p part. They are both in
+volume production, shipping to Intel and their subs.
+
+We have enhanced both parts relative to the governing Intel
+specification. First enhancement is temperature reading resolution. We
+have used registers below 20h for vendor-specific functions in addition
+to those in the Intel-specified vendor range.
+
+Our conversion process produces a result that is reported as two bytes.
+The fan speed control uses this finer value to produce a "step-less" fan
+PWM output. These two bytes are "read-locked" to guarantee that once a
+high or low byte is read, the other byte is locked-in until after the
+next read of any register. So to get an atomic reading, read high or low
+byte, then the very next read should be the opposite byte. Our data
+sheet says 10-bits of resolution, although you may find the lower bits
+are active, they are not necessarily reliable or useful externally. We
+chose not to mask them.
+
+We employ significant filtering that is user tunable as described in the
+data sheet. Our temperature reports and fan PWM outputs are very smooth
+when compared to the competition, in addition to the higher resolution
+temperature reports. The smoother PWM output does not require user
+intervention.
+
+We offer GPIO features on the former VID pins. These are open-drain
+outputs or inputs and may be used as general purpose I/O or as alarm
+outputs that are based on temperature limits. These are in 19h and 1Ah.
+
+We offer flexible mapping of temperature readings to thermal zones. Any
+temperature may be mapped to any zone, which has a default assignment
+that follows Intel's specs.
+
+Since there is a fan to zone assignment that allows for the "hotter" of
+a set of zones to control the PWM of an individual fan, but there is no
+indication to the user, we have added an indicator that shows which zone
+is currently controlling the PWM for a given fan. This is in register
+00h.
+
+Both remote diode temperature readings may be given an offset value such
+that the reported reading as well as the temperature used to determine
+PWM may be offset for system calibration purposes.
+
+PECI Extended configuration allows for having more than two domains per
+PECI address and also provides an enabling function for each PECI
+address. One could use our flexible zone assignment to have a zone
+assigned to up to 4 PECI addresses. This is not possible in the default
+Intel configuration. This would be useful in multi-CPU systems with
+individual fans on each that would benefit from individual fan control.
+This is in register 0Eh.
+
+The tachometer measurement system is flexible and able to adapt to many
+fan types. We can also support pulse-stretched PWM so that 3-wire fans
+may be used. These characteristics are in registers 04h to 07h.
+
+Finally, we have added a tach disable function that turns off the tach
+measurement system for individual tachs in order to save power. That is
+in register 75h.
+
+--
+aSC7621 Product Description
+
+The aSC7621 has a two wire digital interface compatible with SMBus 2.0.
+Using a 10-bit ADC, the aSC7621 measures the temperature of two remote diode
+connected transistors as well as its own die. Support for Platform
+Environmental Control Interface (PECI) is included.
+
+Using temperature information from these four zones, an automatic fan speed
+control algorithm is employed to minimize acoustic impact while achieving
+recommended CPU temperature under varying operational loads.
+
+To set fan speed, the aSC7621 has three independent pulse width modulation
+(PWM) outputs that are controlled by one, or a combination of three,
+temperature zones. Both high- and low-frequency PWM ranges are supported.
+
+The aSC7621 also includes a digital filter that can be invoked to smooth
+temperature readings for better control of fan speed and minimum acoustic
+impact.
+
+The aSC7621 has tachometer inputs to measure fan speed on up to four fans.
+Limit and status registers for all measured values are included to alert
+the system host that any measurements are outside of programmed limits
+via status registers.
+
+System voltages of VCCP, 2.5V, 3.3V, 5.0V, and 12V motherboard power are
+monitored efficiently with internal scaling resistors.
+
+Features
+- Supports PECI interface and monitors internal and remote thermal diodes
+- 2-wire, SMBus 2.0 compliant, serial interface
+- 10-bit ADC
+- Monitors VCCP, 2.5V, 3.3V, 5.0V, and 12V motherboard/processor supplies
+- Programmable autonomous fan control based on temperature readings
+- Noise filtering of temperature reading for fan speed control
+- 0.25C digital temperature sensor resolution
+- 3 PWM fan speed control outputs for 2-, 3- or 4-wire fans and up to 4 fan
+ tachometer inputs
+- Enhanced measured temperature to Temperature Zone assignment.
+- Provides high and low PWM frequency ranges
+- 3 GPIO pins for custom use
+- 24-Lead QSOP package
+
+Configuration Notes
+===================
+
+Except where noted below, the sysfs entries created by this driver follow
+the standards defined in "sysfs-interface".
+
+temp1_source
+ 0 (default) peci_legacy = 0, Remote 1 Temperature
+ peci_legacy = 1, PECI Processor Temperature 0
+ 1 Remote 1 Temperature
+ 2 Remote 2 Temperature
+ 3 Internal Temperature
+ 4 PECI Processor Temperature 0
+ 5 PECI Processor Temperature 1
+ 6 PECI Processor Temperature 2
+ 7 PECI Processor Temperature 3
+
+temp2_source
+ 0 (default) Internal Temperature
+ 1 Remote 1 Temperature
+ 2 Remote 2 Temperature
+ 3 Internal Temperature
+ 4 PECI Processor Temperature 0
+ 5 PECI Processor Temperature 1
+ 6 PECI Processor Temperature 2
+ 7 PECI Processor Temperature 3
+
+temp3_source
+ 0 (default) Remote 2 Temperature
+ 1 Remote 1 Temperature
+ 2 Remote 2 Temperature
+ 3 Internal Temperature
+ 4 PECI Processor Temperature 0
+ 5 PECI Processor Temperature 1
+ 6 PECI Processor Temperature 2
+ 7 PECI Processor Temperature 3
+
+temp4_source
+ 0 (default) peci_legacy = 0, PECI Processor Temperature 0
+ peci_legacy = 1, Remote 1 Temperature
+ 1 Remote 1 Temperature
+ 2 Remote 2 Temperature
+ 3 Internal Temperature
+ 4 PECI Processor Temperature 0
+ 5 PECI Processor Temperature 1
+ 6 PECI Processor Temperature 2
+ 7 PECI Processor Temperature 3
+
+temp[1-4]_smoothing_enable
+temp[1-4]_smoothing_time
+ Smooths spikes in temp readings caused by noise.
+ Valid values in milliseconds are:
+ 35000
+ 17600
+ 11800
+ 7000
+ 4400
+ 3000
+ 1600
+ 800
+
+temp[1-4]_crit
+ When the corresponding zone temperature reaches this value,
+ ALL pwm outputs will got to 100%.
+
+temp[5-8]_input
+temp[5-8]_enable
+ The aSC7621 can also read temperatures provided by the processor
+ via the PECI bus. Usually these are "core" temps and are relative
+ to the point where the automatic thermal control circuit starts
+ throttling. This means that these are usually negative numbers.
+
+pwm[1-3]_enable
+ 0 Fan off.
+ 1 Fan on manual control.
+ 2 Fan on automatic control and will run at the minimum pwm
+ if the temperature for the zone is below the minimum.
+ 3 Fan on automatic control but will be off if the temperature
+ for the zone is below the minimum.
+ 4-254 Ignored.
+ 255 Fan on full.
+
+pwm[1-3]_auto_channels
+ Bitmap as described in sysctl-interface with the following
+ exceptions...
+ Only the following combination of zones (and their corresponding masks)
+ are valid:
+ 1
+ 2
+ 3
+ 2,3
+ 1,2,3
+ 4
+ 1,2,3,4
+
+ Special values:
+ 0 Disabled.
+ 16 Fan on manual control.
+ 31 Fan on full.
+
+
+pwm[1-3]_invert
+ When set, inverts the meaning of pwm[1-3].
+ i.e. when pwm = 0, the fan will be on full and
+ when pwm = 255 the fan will be off.
+
+pwm[1-3]_freq
+ PWM frequency in Hz
+ Valid values in Hz are:
+
+ 10
+ 15
+ 23
+ 30 (default)
+ 38
+ 47
+ 62
+ 94
+ 23000
+ 24000
+ 25000
+ 26000
+ 27000
+ 28000
+ 29000
+ 30000
+
+ Setting any other value will be ignored.
+
+peci_enable
+ Enables or disables PECI
+
+peci_avg
+ Input filter average time.
+
+ 0 0 Sec. (no Smoothing) (default)
+ 1 0.25 Sec.
+ 2 0.5 Sec.
+ 3 1.0 Sec.
+ 4 2.0 Sec.
+ 5 4.0 Sec.
+ 6 8.0 Sec.
+ 7 0.0 Sec.
+
+peci_legacy
+
+ 0 Standard Mode (default)
+ Remote Diode 1 reading is associated with
+ Temperature Zone 1, PECI is associated with
+ Zone 4
+
+ 1 Legacy Mode
+ PECI is associated with Temperature Zone 1,
+ Remote Diode 1 is associated with Zone 4
+
+peci_diode
+ Diode filter
+
+ 0 0.25 Sec.
+ 1 1.1 Sec.
+ 2 2.4 Sec. (default)
+ 3 3.4 Sec.
+ 4 5.0 Sec.
+ 5 6.8 Sec.
+ 6 10.2 Sec.
+ 7 16.4 Sec.
+
+peci_4domain
+ Four domain enable
+
+ 0 1 or 2 Domains for enabled processors (default)
+ 1 3 or 4 Domains for enabled processors
+
+peci_domain
+ Domain
+
+ 0 Processor contains a single domain (0) (default)
+ 1 Processor contains two domains (0,1)
diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp
index 92267b62db5..25568f84480 100644
--- a/Documentation/hwmon/coretemp
+++ b/Documentation/hwmon/coretemp
@@ -21,8 +21,8 @@ Temperature is measured in degrees Celsius and measurement resolution is
1 degree C. Valid temperatures are from 0 to TjMax degrees C, because
the actual value of temperature register is in fact a delta from TjMax.
-Temperature known as TjMax is the maximum junction temperature of processor.
-Intel defines this temperature as 85C or 100C. At this temperature, protection
+Temperature known as TjMax is the maximum junction temperature of processor,
+which depends on the CPU model. See table below. At this temperature, protection
mechanism will perform actions to forcibly cool down the processor. Alarm
may be raised, if the temperature grows enough (more than TjMax) to trigger
the Out-Of-Spec bit. Following table summarizes the exported sysfs files:
@@ -38,3 +38,104 @@ temp1_label - Contains string "Core X", where X is processor
The TjMax temperature is set to 85 degrees C if undocumented model specific
register (UMSR) 0xee has bit 30 set. If not the TjMax is 100 degrees C as
(sometimes) documented in processor datasheet.
+
+Appendix A. Known TjMax lists (TBD):
+Some information comes from ark.intel.com
+
+Process Processor TjMax(C)
+
+32nm Core i3/i5/i7 Processors
+ i7 660UM/640/620, 640LM/620, 620M, 610E 105
+ i5 540UM/520/430, 540M/520/450/430 105
+ i3 330E, 370M/350/330 90 rPGA, 105 BGA
+ i3 330UM 105
+
+32nm Core i7 Extreme Processors
+ 980X 100
+
+32nm Celeron Processors
+ U3400 105
+ P4505/P4500 90
+
+45nm Xeon Processors 5400 Quad-Core
+ X5492, X5482, X5472, X5470, X5460, X5450 85
+ E5472, E5462, E5450/40/30/20/10/05 85
+ L5408 95
+ L5430, L5420, L5410 70
+
+45nm Xeon Processors 5200 Dual-Core
+ X5282, X5272, X5270, X5260 90
+ E5240 90
+ E5205, E5220 70, 90
+ L5240 70
+ L5238, L5215 95
+
+45nm Atom Processors
+ D525/510/425/410 100
+ Z560/550/540/530P/530/520PT/520/515/510PT/510P 90
+ Z510/500 90
+ N475/470/455/450 100
+ N280/270 90
+ 330/230 125
+
+45nm Core2 Processors
+ Solo ULV SU3500/3300 100
+ T9900/9800/9600/9550/9500/9400/9300/8300/8100 105
+ T6670/6500/6400 105
+ T6600 90
+ SU9600/9400/9300 105
+ SP9600/9400 105
+ SL9600/9400/9380/9300 105
+ P9700/9600/9500/8800/8700/8600/8400/7570 105
+ P7550/7450 90
+
+45nm Core2 Quad Processors
+ Q9100/9000 100
+
+45nm Core2 Extreme Processors
+ X9100/9000 105
+ QX9300 100
+
+45nm Core i3/i5/i7 Processors
+ i7 940XM/920 100
+ i7 840QM/820/740/720 100
+
+45nm Celeron Processors
+ SU2300 100
+ 900 105
+
+65nm Core2 Duo Processors
+ Solo U2200, U2100 100
+ U7700/7600/7500 100
+ T7800/7700/7600/7500/7400/7300/7250/7200/7100 100
+ T5870/5670/5600/5550/5500/5470/5450/5300/5270 100
+ T5250 100
+ T5800/5750/5200 85
+ L7700/7500/7400/7300/7200 100
+
+65nm Core2 Extreme Processors
+ X7900/7800 100
+
+65nm Core Duo Processors
+ U2500/2400 100
+ T2700/2600/2450/2400/2350/2300E/2300/2250/2050 100
+ L2500/2400/2300 100
+
+65nm Core Solo Processors
+ U1500/1400/1300 100
+ T1400/1350/1300/1250 100
+
+65nm Xeon Processors 5000 Quad-Core
+ X5000 90-95
+ E5000 80
+ L5000 70
+ L5318 95
+
+65nm Xeon Processors 5000 Dual-Core
+ 5080, 5063, 5060, 5050, 5030 80-90
+ 5160, 5150, 5148, 5140, 5130, 5120, 5110 80
+ L5138 100
+
+65nm Celeron Processors
+ T1700/1600 100
+ 560/550/540/530 100
diff --git a/Documentation/hwmon/dme1737 b/Documentation/hwmon/dme1737
index 001d2e70bc1..fc5df7654d6 100644
--- a/Documentation/hwmon/dme1737
+++ b/Documentation/hwmon/dme1737
@@ -9,11 +9,15 @@ Supported chips:
* SMSC SCH3112, SCH3114, SCH3116
Prefix: 'sch311x'
Addresses scanned: none, address read from Super-I/O config space
- Datasheet: http://www.nuhorizons.com/FeaturedProducts/Volume1/SMSC/311x.pdf
+ Datasheet: Available on the Internet
* SMSC SCH5027
Prefix: 'sch5027'
Addresses scanned: I2C 0x2c, 0x2d, 0x2e
Datasheet: Provided by SMSC upon request and under NDA
+ * SMSC SCH5127
+ Prefix: 'sch5127'
+ Addresses scanned: none, address read from Super-I/O config space
+ Datasheet: Provided by SMSC upon request and under NDA
Authors:
Juerg Haefliger <juergh@gmail.com>
@@ -36,8 +40,8 @@ Description
-----------
This driver implements support for the hardware monitoring capabilities of the
-SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, and SMSC
-SCH311x Super-I/O chips. These chips feature monitoring of 3 temp sensors
+SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, SCH311x,
+and SCH5127 Super-I/O chips. These chips feature monitoring of 3 temp sensors
temp[1-3] (2 remote diodes and 1 internal), 7 voltages in[0-6] (6 external and
1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement
up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and
@@ -48,14 +52,14 @@ Fan[3-6] and pwm[3,5-6] are optional features and their availability depends on
the configuration of the chip. The driver will detect which features are
present during initialization and create the sysfs attributes accordingly.
-For the SCH311x, fan[1-3] and pwm[1-3] are always present and fan[4-6] and
-pwm[5-6] don't exist.
+For the SCH311x and SCH5127, fan[1-3] and pwm[1-3] are always present and
+fan[4-6] and pwm[5-6] don't exist.
The hardware monitoring features of the DME1737, A8000, and SCH5027 are only
-accessible via SMBus, while the SCH311x only provides access via the ISA bus.
-The driver will therefore register itself as an I2C client driver if it detects
-a DME1737, A8000, or SCH5027 and as a platform driver if it detects a SCH311x
-chip.
+accessible via SMBus, while the SCH311x and SCH5127 only provide access via
+the ISA bus. The driver will therefore register itself as an I2C client driver
+if it detects a DME1737, A8000, or SCH5027 and as a platform driver if it
+detects a SCH311x or SCH5127 chip.
Voltage Monitoring
@@ -76,7 +80,7 @@ DME1737, A8000:
in6: Vbat (+3.0V) 0V - 4.38V
SCH311x:
- in0: +2.5V 0V - 6.64V
+ in0: +2.5V 0V - 3.32V
in1: Vccp (processor core) 0V - 2V
in2: VCC (internal +3.3V) 0V - 4.38V
in3: +5V 0V - 6.64V
@@ -93,6 +97,15 @@ SCH5027:
in5: VTR (+3.3V standby) 0V - 4.38V
in6: Vbat (+3.0V) 0V - 4.38V
+SCH5127:
+ in0: +2.5 0V - 3.32V
+ in1: Vccp (processor core) 0V - 3V
+ in2: VCC (internal +3.3V) 0V - 4.38V
+ in3: V2_IN 0V - 1.5V
+ in4: V1_IN 0V - 1.5V
+ in5: VTR (+3.3V standby) 0V - 4.38V
+ in6: Vbat (+3.0V) 0V - 4.38V
+
Each voltage input has associated min and max limits which trigger an alarm
when crossed.
@@ -293,3 +306,21 @@ pwm[1-3]_auto_point1_pwm RW Auto PWM pwm point. Auto_point1 is the
pwm[1-3]_auto_point2_pwm RO Auto PWM pwm point. Auto_point2 is the
full-speed duty-cycle which is hard-
wired to 255 (100% duty-cycle).
+
+Chip Differences
+----------------
+
+Feature dme1737 sch311x sch5027 sch5127
+-------------------------------------------------------
+temp[1-3]_offset yes yes
+vid yes
+zone3 yes yes yes
+zone[1-3]_hyst yes yes
+pwm min/off yes yes
+fan3 opt yes opt yes
+pwm3 opt yes opt yes
+fan4 opt opt
+fan5 opt opt
+pwm5 opt opt
+fan6 opt opt
+pwm6 opt opt
diff --git a/Documentation/hwmon/emc2103 b/Documentation/hwmon/emc2103
new file mode 100644
index 00000000000..a12b2c12714
--- /dev/null
+++ b/Documentation/hwmon/emc2103
@@ -0,0 +1,33 @@
+Kernel driver emc2103
+======================
+
+Supported chips:
+ * SMSC EMC2103
+ Addresses scanned: I2C 0x2e
+ Prefix: 'emc2103'
+ Datasheet: Not public
+
+Authors:
+ Steve Glendinning <steve.glendinning@smsc.com>
+
+Description
+-----------
+
+The Standard Microsystems Corporation (SMSC) EMC2103 chips
+contain up to 4 temperature sensors and a single fan controller.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4 or 8) to give
+the readings more range or accuracy. Not all RPM values can accurately be
+represented, so some rounding is done. With a divider of 1, the lowest
+representable value is 480 RPM.
+
+This driver supports RPM based control, to use this a fan target
+should be written to fan1_target and pwm1_enable should be set to 3.
+
+The 2103-2 and 2103-4 variants have a third temperature sensor, which can
+be connected to two anti-parallel diodes. These values can be read
+as temp3 and temp4. If only one diode is attached to this channel, temp4
+will show as "fault". The module parameter "apd=0" can be used to suppress
+this 4th channel when anti-parallel diodes are not fitted.
diff --git a/Documentation/hwmon/g760a b/Documentation/hwmon/g760a
index e032eeb7562..cfc89453706 100644
--- a/Documentation/hwmon/g760a
+++ b/Documentation/hwmon/g760a
@@ -5,7 +5,7 @@ Supported chips:
* Global Mixed-mode Technology Inc. G760A
Prefix: 'g760a'
Datasheet: Publicly available at the GMT website
- http://www.gmt.com.tw/datasheet/g760a.pdf
+ http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf
Author: Herbert Valerio Riedel <hvr@gnu.org>
diff --git a/Documentation/hwmon/gl518sm b/Documentation/hwmon/gl518sm
index 229f8b78918..26f9f3c02dc 100644
--- a/Documentation/hwmon/gl518sm
+++ b/Documentation/hwmon/gl518sm
@@ -5,11 +5,10 @@ Supported chips:
* Genesys Logic GL518SM release 0x00
Prefix: 'gl518sm'
Addresses scanned: I2C 0x2c and 0x2d
- Datasheet: http://www.genesyslogic.com/pdf
* Genesys Logic GL518SM release 0x80
Prefix: 'gl518sm'
Addresses scanned: I2C 0x2c and 0x2d
- Datasheet: http://www.genesyslogic.com/pdf
+ Datasheet: http://www.genesyslogic.com/
Authors:
Frodo Looijaard <frodol@dds.nl>,
diff --git a/Documentation/hwmon/hpfall.c b/Documentation/hwmon/hpfall.c
index 681ec22b9d0..a4a8fc5d05d 100644
--- a/Documentation/hwmon/hpfall.c
+++ b/Documentation/hwmon/hpfall.c
@@ -1,7 +1,7 @@
/* Disk protection for HP machines.
*
* Copyright 2008 Eric Piel
- * Copyright 2009 Pavel Machek <pavel@suse.cz>
+ * Copyright 2009 Pavel Machek <pavel@ucw.cz>
*
* GPLv2.
*/
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index f9ba96c0ac4..8d08bf0d38e 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -5,31 +5,23 @@ Supported chips:
* IT8705F
Prefix: 'it87'
Addresses scanned: from Super I/O config space (8 I/O ports)
- Datasheet: Publicly available at the ITE website
- http://www.ite.com.tw/product_info/file/pc/IT8705F_V.0.4.1.pdf
+ Datasheet: Once publicly available at the ITE website, but no longer
* IT8712F
Prefix: 'it8712'
Addresses scanned: from Super I/O config space (8 I/O ports)
- Datasheet: Publicly available at the ITE website
- http://www.ite.com.tw/product_info/file/pc/IT8712F_V0.9.1.pdf
- http://www.ite.com.tw/product_info/file/pc/Errata%20V0.1%20for%20IT8712F%20V0.9.1.pdf
- http://www.ite.com.tw/product_info/file/pc/IT8712F_V0.9.3.pdf
+ Datasheet: Once publicly available at the ITE website, but no longer
* IT8716F/IT8726F
Prefix: 'it8716'
Addresses scanned: from Super I/O config space (8 I/O ports)
- Datasheet: Publicly available at the ITE website
- http://www.ite.com.tw/product_info/file/pc/IT8716F_V0.3.ZIP
- http://www.ite.com.tw/product_info/file/pc/IT8726F_V0.3.pdf
+ Datasheet: Once publicly available at the ITE website, but no longer
* IT8718F
Prefix: 'it8718'
Addresses scanned: from Super I/O config space (8 I/O ports)
- Datasheet: Publicly available at the ITE website
- http://www.ite.com.tw/product_info/file/pc/IT8718F_V0.2.zip
- http://www.ite.com.tw/product_info/file/pc/IT8718F_V0%203_(for%20C%20version).zip
+ Datasheet: Once publicly available at the ITE website, but no longer
* IT8720F
Prefix: 'it8720'
Addresses scanned: from Super I/O config space (8 I/O ports)
- Datasheet: Not yet publicly available.
+ Datasheet: Not publicly available
* SiS950 [clone of IT8705F]
Prefix: 'it87'
Addresses scanned: from Super I/O config space (8 I/O ports)
@@ -136,6 +128,10 @@ registers are read whenever any data is read (unless it is less than 1.5
seconds since the last update). This means that you can easily miss
once-only alarms.
+Out-of-limit readings can also result in beeping, if the chip is properly
+wired and configured. Beeping can be enabled or disabled per sensor type
+(temperatures, voltages and fans.)
+
The IT87xx only updates its values each 1.5 seconds; reading it more often
will do no harm, but will return 'old' values.
@@ -150,11 +146,38 @@ Fan speed control
-----------------
The fan speed control features are limited to manual PWM mode. Automatic
-"Smart Guardian" mode control handling is not implemented. However
-if you want to go for "manual mode" just write 1 to pwmN_enable.
+"Smart Guardian" mode control handling is only implemented for older chips
+(see below.) However if you want to go for "manual mode" just write 1 to
+pwmN_enable.
If you are only able to control the fan speed with very small PWM values,
try lowering the PWM base frequency (pwm1_freq). Depending on the fan,
it may give you a somewhat greater control range. The same frequency is
used to drive all fan outputs, which is why pwm2_freq and pwm3_freq are
read-only.
+
+
+Automatic fan speed control (old interface)
+-------------------------------------------
+
+The driver supports the old interface to automatic fan speed control
+which is implemented by IT8705F chips up to revision F and IT8712F
+chips up to revision G.
+
+This interface implements 4 temperature vs. PWM output trip points.
+The PWM output of trip point 4 is always the maximum value (fan running
+at full speed) while the PWM output of the other 3 trip points can be
+freely chosen. The temperature of all 4 trip points can be freely chosen.
+Additionally, trip point 1 has an hysteresis temperature attached, to
+prevent fast switching between fan on and off.
+
+The chip automatically computes the PWM output value based on the input
+temperature, based on this simple rule: if the temperature value is
+between trip point N and trip point N+1 then the PWM output value is
+the one of trip point N. The automatic control mode is less flexible
+than the manual control mode, but it reacts faster, is more robust and
+doesn't use CPU cycles.
+
+Trip points must be set properly before switching to automatic fan speed
+control mode. The driver will perform basic integrity checks before
+actually switching to automatic control mode.
diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42
new file mode 100644
index 00000000000..0e76ef12e4c
--- /dev/null
+++ b/Documentation/hwmon/jc42
@@ -0,0 +1,97 @@
+Kernel driver jc42
+==================
+
+Supported chips:
+ * Analog Devices ADT7408
+ Prefix: 'adt7408'
+ Addresses scanned: I2C 0x18 - 0x1f
+ Datasheets:
+ http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf
+ * IDT TSE2002B3, TS3000B3
+ Prefix: 'tse2002b3', 'ts3000b3'
+ Addresses scanned: I2C 0x18 - 0x1f
+ Datasheets:
+ http://www.idt.com/products/getdoc.cfm?docid=18715691
+ http://www.idt.com/products/getdoc.cfm?docid=18715692
+ * Maxim MAX6604
+ Prefix: 'max6604'
+ Addresses scanned: I2C 0x18 - 0x1f
+ Datasheets:
+ http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
+ * Microchip MCP9805, MCP98242, MCP98243, MCP9843
+ Prefixes: 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
+ Addresses scanned: I2C 0x18 - 0x1f
+ Datasheets:
+ http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf
+ http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf
+ http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf
+ * NXP Semiconductors SE97, SE97B
+ Prefix: 'se97'
+ Addresses scanned: I2C 0x18 - 0x1f
+ Datasheets:
+ http://www.nxp.com/documents/data_sheet/SE97.pdf
+ http://www.nxp.com/documents/data_sheet/SE97B.pdf
+ * NXP Semiconductors SE98
+ Prefix: 'se98'
+ Addresses scanned: I2C 0x18 - 0x1f
+ Datasheets:
+ http://www.nxp.com/documents/data_sheet/SE98.pdf
+ * ON Semiconductor CAT34TS02, CAT6095
+ Prefix: 'cat34ts02', 'cat6095'
+ Addresses scanned: I2C 0x18 - 0x1f
+ Datasheet:
+ http://www.onsemi.com/pub_link/Collateral/CAT34TS02-D.PDF
+ http://www.onsemi.com/pub/Collateral/CAT6095-D.PDF
+ * ST Microelectronics STTS424, STTS424E02
+ Prefix: 'stts424'
+ Addresses scanned: I2C 0x18 - 0x1f
+ Datasheets:
+ http://www.st.com/stonline/products/literature/ds/13447/stts424.pdf
+ http://www.st.com/stonline/products/literature/ds/13448/stts424e02.pdf
+ * JEDEC JC 42.4 compliant temperature sensor chips
+ Prefix: 'jc42'
+ Addresses scanned: I2C 0x18 - 0x1f
+ Datasheet: -
+
+Author:
+ Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Description
+-----------
+
+This driver implements support for JEDEC JC 42.4 compliant temperature sensors.
+The driver auto-detects the chips listed above, but can be manually instantiated
+to support other JC 42.4 compliant chips.
+
+Example: the following will load the driver for a generic JC 42.4 compliant
+temperature sensor at address 0x18 on I2C bus #1:
+
+# modprobe jc42
+# echo jc42 0x18 > /sys/bus/i2c/devices/i2c-1/new_device
+
+A JC 42.4 compliant chip supports a single temperature sensor. Minimum, maximum,
+and critical temperature can be configured. There are alarms for high, low,
+and critical thresholds.
+
+There is also an hysteresis to control the thresholds for resetting alarms.
+Per JC 42.4 specification, the hysteresis threshold can be configured to 0, 1.5,
+3.0, and 6.0 degrees C. Configured hysteresis values will be rounded to those
+limits. The chip supports only a single register to configure the hysteresis,
+which applies to all limits. This register can be written by writing into
+temp1_crit_hyst. Other hysteresis attributes are read-only.
+
+Sysfs entries
+-------------
+
+temp1_input Temperature (RO)
+temp1_min Minimum temperature (RW)
+temp1_max Maximum temperature (RW)
+temp1_crit Critical high temperature (RW)
+
+temp1_crit_hyst Critical hysteresis temperature (RW)
+temp1_max_hyst Maximum hysteresis temperature (RO)
+
+temp1_min_alarm Temperature low alarm
+temp1_max_alarm Temperature high alarm
+temp1_crit_alarm Temperature critical alarm
diff --git a/Documentation/hwmon/k8temp b/Documentation/hwmon/k8temp
index 0005c716614..716dc24c723 100644
--- a/Documentation/hwmon/k8temp
+++ b/Documentation/hwmon/k8temp
@@ -5,7 +5,7 @@ Supported chips:
* AMD Athlon64/FX or Opteron CPUs
Prefix: 'k8temp'
Addresses scanned: PCI space
- Datasheet: http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf
+ Datasheet: http://support.amd.com/us/Processor_TechDocs/32559.pdf
Author: Rudolf Marek
Contact: Rudolf Marek <r.marek@assembler.cz>
diff --git a/Documentation/hwmon/lm63 b/Documentation/hwmon/lm63
index 31660bf9797..b9843eab1af 100644
--- a/Documentation/hwmon/lm63
+++ b/Documentation/hwmon/lm63
@@ -7,6 +7,11 @@ Supported chips:
Addresses scanned: I2C 0x4c
Datasheet: Publicly available at the National Semiconductor website
http://www.national.com/pf/LM/LM63.html
+ * National Semiconductor LM64
+ Prefix: 'lm64'
+ Addresses scanned: I2C 0x18 and 0x4e
+ Datasheet: Publicly available at the National Semiconductor website
+ http://www.national.com/pf/LM/LM64.html
Author: Jean Delvare <khali@linux-fr.org>
@@ -55,3 +60,5 @@ The lm63 driver will not update its values more frequently than every
second; reading them more often will do no harm, but will return 'old'
values.
+The LM64 is effectively an LM63 with GPIO lines. The driver does not
+support these GPIO lines at present.
diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85
index a13680871bc..b98e0e0d191 100644
--- a/Documentation/hwmon/lm85
+++ b/Documentation/hwmon/lm85
@@ -9,15 +9,15 @@ Supported chips:
* Analog Devices ADM1027
Prefix: 'adm1027'
Addresses scanned: I2C 0x2c, 0x2d, 0x2e
- Datasheet: http://www.analog.com/en/prod/0,,766_825_ADM1027,00.html
+ Datasheet: http://www.onsemi.com/PowerSolutions/product.do?id=ADM1027
* Analog Devices ADT7463
Prefix: 'adt7463'
Addresses scanned: I2C 0x2c, 0x2d, 0x2e
- Datasheet: http://www.analog.com/en/prod/0,,766_825_ADT7463,00.html
+ Datasheet: http://www.onsemi.com/PowerSolutions/product.do?id=ADT7463
* SMSC EMC6D100, SMSC EMC6D101
Prefix: 'emc6d100'
Addresses scanned: I2C 0x2c, 0x2d, 0x2e
- Datasheet: http://www.smsc.com/main/tools/discontinued/6d100.pdf
+ Datasheet: http://www.smsc.com/media/Downloads_Public/discontinued/6d100.pdf
* SMSC EMC6D102
Prefix: 'emc6d102'
Addresses scanned: I2C 0x2c, 0x2d, 0x2e
@@ -157,7 +157,7 @@ temperature configuration points:
There are three PWM outputs. The LM85 datasheet suggests that the
pwm3 output control both fan3 and fan4. Each PWM can be individually
-configured and assigned to a zone for it's control value. Each PWM can be
+configured and assigned to a zone for its control value. Each PWM can be
configured individually according to the following options.
* pwm#_auto_pwm_min - this specifies the PWM value for temp#_auto_temp_off
diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90
index 93d8e3d5515..6a03dd4bcc9 100644
--- a/Documentation/hwmon/lm90
+++ b/Documentation/hwmon/lm90
@@ -84,6 +84,10 @@ Supported chips:
Addresses scanned: I2C 0x4c
Datasheet: Publicly available at the Maxim website
http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500
+ * Winbond/Nuvoton W83L771AWG/ASG
+ Prefix: 'w83l771'
+ Addresses scanned: I2C 0x4c
+ Datasheet: Not publicly available, can be requested from Nuvoton
Author: Jean Delvare <khali@linux-fr.org>
@@ -147,6 +151,12 @@ MAX6680 and MAX6681:
* Selectable address
* Remote sensor type selection
+W83L771AWG/ASG
+ * The AWG and ASG variants only differ in package format.
+ * Filter and alert configuration register at 0xBF
+ * Diode ideality factor configuration (remote sensor) at 0xE3
+ * Moving average (depending on conversion rate)
+
All temperature values are given in degrees Celsius. Resolution
is 1.0 degree for the local temperature, 0.125 degree for the remote
temperature, except for the MAX6657, MAX6658 and MAX6659 which have a
@@ -163,6 +173,18 @@ The lm90 driver will not update its values more frequently than every
other second; reading them more often will do no harm, but will return
'old' values.
+SMBus Alert Support
+-------------------
+
+This driver has basic support for SMBus alert. When an alert is received,
+the status register is read and the faulty temperature channel is logged.
+
+The Analog Devices chips (ADM1032 and ADT7461) do not implement the SMBus
+alert protocol properly so additional care is needed: the ALERT output is
+disabled when an alert is received, and is re-enabled only when the alarm
+is gone. Otherwise the chip would block alerts from other chips in the bus
+as long as the alarm is active.
+
PEC Support
-----------
diff --git a/Documentation/hwmon/ltc4245 b/Documentation/hwmon/ltc4245
index 02838a47d86..b478b086496 100644
--- a/Documentation/hwmon/ltc4245
+++ b/Documentation/hwmon/ltc4245
@@ -72,11 +72,31 @@ in6_min_alarm 5v output undervoltage alarm
in7_min_alarm 3v output undervoltage alarm
in8_min_alarm Vee (-12v) output undervoltage alarm
-in9_input GPIO #1 voltage data
-in10_input GPIO #2 voltage data
-in11_input GPIO #3 voltage data
+in9_input GPIO voltage data (see note 1)
+in10_input GPIO voltage data (see note 1)
+in11_input GPIO voltage data (see note 1)
power1_input 12v power usage (mW)
power2_input 5v power usage (mW)
power3_input 3v power usage (mW)
power4_input Vee (-12v) power usage (mW)
+
+
+Note 1
+------
+
+If you have NOT configured the driver to sample all GPIO pins as analog
+voltages, then the in10_input and in11_input sysfs attributes will not be
+created. The driver will sample the GPIO pin that is currently connected to the
+ADC as an analog voltage, and report the value in in9_input.
+
+If you have configured the driver to sample all GPIO pins as analog voltages,
+then they will be sampled in round-robin fashion. If userspace reads too
+slowly, -EAGAIN will be returned when you read the sysfs attribute containing
+the sensor reading.
+
+The LTC4245 chip can be configured to sample all GPIO pins with two methods:
+1) platform data -- see include/linux/i2c/ltc4245.h
+2) OF device tree -- add the "ltc4245,use-extra-gpios" property to each chip
+
+The default mode of operation is to sample a single GPIO pin.
diff --git a/Documentation/hwmon/pc87427 b/Documentation/hwmon/pc87427
index db5cc1227a8..8fdd08c9e48 100644
--- a/Documentation/hwmon/pc87427
+++ b/Documentation/hwmon/pc87427
@@ -18,10 +18,11 @@ Description
The National Semiconductor Super I/O chip includes complete hardware
monitoring capabilities. It can monitor up to 18 voltages, 8 fans and
-6 temperature sensors. Only the fans are supported at the moment.
+6 temperature sensors. Only the fans and temperatures are supported at
+the moment, voltages aren't.
-This chip also has fan controlling features, which are not yet supported
-by this driver either.
+This chip also has fan controlling features (up to 4 PWM outputs),
+which are partly supported by this driver.
The driver assumes that no more than one chip is present, which seems
reasonable.
@@ -36,3 +37,23 @@ signal. Speeds down to 83 RPM can be measured.
An alarm is triggered if the rotation speed drops below a programmable
limit. Another alarm is triggered if the speed is too low to be measured
(including stalled or missing fan).
+
+
+Fan Speed Control
+-----------------
+
+Fan speed can be controlled by PWM outputs. There are 4 possible modes:
+always off, always on, manual and automatic. The latter isn't supported
+by the driver: you can only return to that mode if it was the original
+setting, and the configuration interface is missing.
+
+
+Temperature Monitoring
+----------------------
+
+The PC87427 relies on external sensors (following the SensorPath
+standard), so the resolution and range depend on the type of sensor
+connected. The integer part can be 8-bit or 9-bit, and can be signed or
+not. I couldn't find a way to figure out the external sensor data
+temperature format, so user-space adjustment (typically by a factor 2)
+may be required.
diff --git a/Documentation/hwmon/pkgtemp b/Documentation/hwmon/pkgtemp
new file mode 100644
index 00000000000..c8e1fb0fadd
--- /dev/null
+++ b/Documentation/hwmon/pkgtemp
@@ -0,0 +1,36 @@
+Kernel driver pkgtemp
+======================
+
+Supported chips:
+ * Intel family
+ Prefix: 'pkgtemp'
+ CPUID:
+ Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual
+ Volume 3A: System Programming Guide
+
+Author: Fenghua Yu
+
+Description
+-----------
+
+This driver permits reading package level temperature sensor embedded inside
+Intel CPU package. The sensors can be in core, uncore, memory controller, or
+other components in a package. The feature is first implemented in Intel Sandy
+Bridge platform.
+
+Temperature is measured in degrees Celsius and measurement resolution is
+1 degree C. Valid temperatures are from 0 to TjMax degrees C, because the actual
+value of temperature register is in fact a delta from TjMax.
+
+Temperature known as TjMax is the maximum junction temperature of package.
+We get this from MSR_IA32_TEMPERATURE_TARGET. If the MSR is not accessible,
+we define TjMax as 100 degrees Celsius. At this temperature, protection
+mechanism will perform actions to forcibly cool down the package. Alarm
+may be raised, if the temperature grows enough (more than TjMax) to trigger
+the Out-Of-Spec bit. Following table summarizes the exported sysfs files:
+
+temp1_input - Package temperature (in millidegrees Celsius).
+temp1_max - All cooling devices should be turned on.
+temp1_crit - Maximum junction temperature (in millidegrees Celsius).
+temp1_crit_alarm - Set when Out-of-spec bit is set, never clears.
+ Correct CPU operation is no longer guaranteed.
diff --git a/Documentation/hwmon/smm665 b/Documentation/hwmon/smm665
new file mode 100644
index 00000000000..3820fc9ca52
--- /dev/null
+++ b/Documentation/hwmon/smm665
@@ -0,0 +1,157 @@
+Kernel driver smm665
+====================
+
+Supported chips:
+ * Summit Microelectronics SMM465
+ Prefix: 'smm465'
+ Addresses scanned: -
+ Datasheet:
+ http://www.summitmicro.com/prod_select/summary/SMM465/SMM465DS.pdf
+ * Summit Microelectronics SMM665, SMM665B
+ Prefix: 'smm665'
+ Addresses scanned: -
+ Datasheet:
+ http://www.summitmicro.com/prod_select/summary/SMM665/SMM665B_2089_20.pdf
+ * Summit Microelectronics SMM665C
+ Prefix: 'smm665c'
+ Addresses scanned: -
+ Datasheet:
+ http://www.summitmicro.com/prod_select/summary/SMM665C/SMM665C_2125.pdf
+ * Summit Microelectronics SMM764
+ Prefix: 'smm764'
+ Addresses scanned: -
+ Datasheet:
+ http://www.summitmicro.com/prod_select/summary/SMM764/SMM764_2098.pdf
+ * Summit Microelectronics SMM766, SMM766B
+ Prefix: 'smm766'
+ Addresses scanned: -
+ Datasheets:
+ http://www.summitmicro.com/prod_select/summary/SMM766/SMM766_2086.pdf
+ http://www.summitmicro.com/prod_select/summary/SMM766B/SMM766B_2122.pdf
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Module Parameters
+-----------------
+
+* vref: int
+ Default: 1250 (mV)
+ Reference voltage on VREF_ADC pin in mV. It should not be necessary to set
+ this parameter unless a non-default reference voltage is used.
+
+
+Description
+-----------
+
+[From datasheet] The SMM665 is an Active DC Output power supply Controller
+that monitors, margins and cascade sequences power. The part monitors six
+power supply channels as well as VDD, 12V input, two general-purpose analog
+inputs and an internal temperature sensor using a 10-bit ADC.
+
+Each monitored channel has its own high and low limits, plus a critical
+limit.
+
+Support for SMM465, SMM764, and SMM766 has been implemented but is untested.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for devices, since there is no register which
+can be safely used to identify the chip. You will have to instantiate
+the devices explicitly. When instantiating the device, you have to specify
+its configuration register address.
+
+Example: the following will load the driver for an SMM665 at address 0x57
+on I2C bus #1:
+$ modprobe smm665
+$ echo smm665 0x57 > /sys/bus/i2c/devices/i2c-1/new_device
+
+
+Sysfs entries
+-------------
+
+This driver uses the values in the datasheet to convert ADC register values
+into the values specified in the sysfs-interface document. All attributes are
+read only.
+
+Min, max, lcrit, and crit values are used by the chip to trigger external signals
+and/or other activity. Triggered signals can include HEALTHY, RST, Power Off,
+or Fault depending on the chip configuration. The driver reports values as lcrit
+or crit if exceeding the limits triggers RST, Power Off, or Fault, and as min or
+max otherwise. For details please see the SMM665 datasheet.
+
+For SMM465 and SMM764, values for Channel E and F are reported but undefined.
+
+in1_input 12V input voltage (mV)
+in2_input 3.3V (VDD) input voltage (mV)
+in3_input Channel A voltage (mV)
+in4_input Channel B voltage (mV)
+in5_input Channel C voltage (mV)
+in6_input Channel D voltage (mV)
+in7_input Channel E voltage (mV)
+in8_input Channel F voltage (mV)
+in9_input AIN1 voltage (mV)
+in10_input AIN2 voltage (mV)
+
+in1_min 12v input minimum voltage (mV)
+in2_min 3.3V (VDD) input minimum voltage (mV)
+in3_min Channel A minimum voltage (mV)
+in4_min Channel B minimum voltage (mV)
+in5_min Channel C minimum voltage (mV)
+in6_min Channel D minimum voltage (mV)
+in7_min Channel E minimum voltage (mV)
+in8_min Channel F minimum voltage (mV)
+in9_min AIN1 minimum voltage (mV)
+in10_min AIN2 minimum voltage (mV)
+
+in1_max 12v input maximum voltage (mV)
+in2_max 3.3V (VDD) input maximum voltage (mV)
+in3_max Channel A maximum voltage (mV)
+in4_max Channel B maximum voltage (mV)
+in5_max Channel C maximum voltage (mV)
+in6_max Channel D maximum voltage (mV)
+in7_max Channel E maximum voltage (mV)
+in8_max Channel F maximum voltage (mV)
+in9_max AIN1 maximum voltage (mV)
+in10_max AIN2 maximum voltage (mV)
+
+in1_lcrit 12v input critical minimum voltage (mV)
+in2_lcrit 3.3V (VDD) input critical minimum voltage (mV)
+in3_lcrit Channel A critical minimum voltage (mV)
+in4_lcrit Channel B critical minimum voltage (mV)
+in5_lcrit Channel C critical minimum voltage (mV)
+in6_lcrit Channel D critical minimum voltage (mV)
+in7_lcrit Channel E critical minimum voltage (mV)
+in8_lcrit Channel F critical minimum voltage (mV)
+in9_lcrit AIN1 critical minimum voltage (mV)
+in10_lcrit AIN2 critical minimum voltage (mV)
+
+in1_crit 12v input critical maximum voltage (mV)
+in2_crit 3.3V (VDD) input critical maximum voltage (mV)
+in3_crit Channel A critical maximum voltage (mV)
+in4_crit Channel B critical maximum voltage (mV)
+in5_crit Channel C critical maximum voltage (mV)
+in6_crit Channel D critical maximum voltage (mV)
+in7_crit Channel E critical maximum voltage (mV)
+in8_crit Channel F critical maximum voltage (mV)
+in9_crit AIN1 critical maximum voltage (mV)
+in10_crit AIN2 critical maximum voltage (mV)
+
+in1_crit_alarm 12v input critical alarm
+in2_crit_alarm 3.3V (VDD) input critical alarm
+in3_crit_alarm Channel A critical alarm
+in4_crit_alarm Channel B critical alarm
+in5_crit_alarm Channel C critical alarm
+in6_crit_alarm Channel D critical alarm
+in7_crit_alarm Channel E critical alarm
+in8_crit_alarm Channel F critical alarm
+in9_crit_alarm AIN1 critical alarm
+in10_crit_alarm AIN2 critical alarm
+
+temp1_input Chip tempererature
+temp1_min Mimimum chip tempererature
+temp1_max Maximum chip tempererature
+temp1_crit Critical chip tempererature
+temp1_crit_alarm Temperature critical alarm
diff --git a/Documentation/hwmon/smsc47m1 b/Documentation/hwmon/smsc47m1
index 42c8431b3c9..2a13378dcf2 100644
--- a/Documentation/hwmon/smsc47m1
+++ b/Documentation/hwmon/smsc47m1
@@ -7,13 +7,10 @@ Supported chips:
Addresses scanned: none, address read from Super I/O config space
Prefix: 'smsc47m1'
Datasheets:
- http://www.smsc.com/main/datasheets/47b27x.pdf
- http://www.smsc.com/main/datasheets/47m10x.pdf
- http://www.smsc.com/main/datasheets/47m112.pdf
- http://www.smsc.com/main/tools/discontinued/47m13x.pdf
- http://www.smsc.com/main/datasheets/47m14x.pdf
- http://www.smsc.com/main/tools/discontinued/47m15x.pdf
- http://www.smsc.com/main/datasheets/47m192.pdf
+ http://www.smsc.com/media/Downloads_Public/Data_Sheets/47b272.pdf
+ http://www.smsc.com/media/Downloads_Public/Data_Sheets/47m10x.pdf
+ http://www.smsc.com/media/Downloads_Public/Data_Sheets/47m112.pdf
+ http://www.smsc.com/
* SMSC LPC47M292
Addresses scanned: none, address read from Super I/O config space
Prefix: 'smsc47m2'
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index 3de6b0bcb14..48ceabedf55 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -80,9 +80,9 @@ All entries (except name) are optional, and should only be created in a
given driver if the chip has the feature.
-********
-* Name *
-********
+*********************
+* Global attributes *
+*********************
name The chip name.
This should be a short, lowercase string, not containing
@@ -91,6 +91,12 @@ name The chip name.
I2C devices get this attribute created automatically.
RO
+update_interval The interval at which the chip will update readings.
+ Unit: millisecond
+ RW
+ Some devices have a variable update rate or interval.
+ This attribute can be used to change it to the desired value.
+
************
* Voltages *
@@ -100,10 +106,24 @@ in[0-*]_min Voltage min value.
Unit: millivolt
RW
+in[0-*]_lcrit Voltage critical min value.
+ Unit: millivolt
+ RW
+ If voltage drops to or below this limit, the system may
+ take drastic action such as power down or reset. At the very
+ least, it should report a fault.
+
in[0-*]_max Voltage max value.
Unit: millivolt
RW
+in[0-*]_crit Voltage critical max value.
+ Unit: millivolt
+ RW
+ If voltage reaches or exceeds this limit, the system may
+ take drastic action such as power down or reset. At the very
+ least, it should report a fault.
+
in[0-*]_input Voltage input value.
Unit: millivolt
RO
@@ -277,7 +297,7 @@ temp[1-*]_input Temperature input value.
Unit: millidegree Celsius
RO
-temp[1-*]_crit Temperature critical value, typically greater than
+temp[1-*]_crit Temperature critical max value, typically greater than
corresponding temp_max values.
Unit: millidegree Celsius
RW
@@ -289,6 +309,11 @@ temp[1-*]_crit_hyst
from the critical value.
RW
+temp[1-*]_lcrit Temperature critical min value, typically lower than
+ corresponding temp_min values.
+ Unit: millidegree Celsius
+ RW
+
temp[1-*]_offset
Temperature offset which is added to the temperature reading
by the chip.
@@ -337,9 +362,6 @@ Also see the Alarms section for status flags associated with temperatures.
* Currents *
************
-Note that no known chip provides current measurements as of writing,
-so this part is theoretical, so to say.
-
curr[1-*]_max Current max value
Unit: milliampere
RW
@@ -464,6 +486,7 @@ limit-related alarms, not both. The driver should just reflect the hardware
implementation.
in[0-*]_alarm
+curr[1-*]_alarm
fan[1-*]_alarm
temp[1-*]_alarm
Channel alarm
@@ -475,6 +498,8 @@ OR
in[0-*]_min_alarm
in[0-*]_max_alarm
+curr[1-*]_min_alarm
+curr[1-*]_max_alarm
fan[1-*]_min_alarm
fan[1-*]_max_alarm
temp[1-*]_min_alarm
@@ -490,7 +515,6 @@ to notify open diodes, unconnected fans etc. where the hardware
supports it. When this boolean has value 1, the measurement for that
channel should not be trusted.
-in[0-*]_fault
fan[1-*]_fault
temp[1-*]_fault
Input fault condition
@@ -506,6 +530,7 @@ beep_enable Master beep enable
RW
in[0-*]_beep
+curr[1-*]_beep
fan[1-*]_beep
temp[1-*]_beep
Channel beep
diff --git a/Documentation/hwmon/thmc50 b/Documentation/hwmon/thmc50
index 9639ca93d55..8a7772ade8d 100644
--- a/Documentation/hwmon/thmc50
+++ b/Documentation/hwmon/thmc50
@@ -9,7 +9,7 @@ Supported chips:
* Texas Instruments THMC50
Prefix: 'thmc50'
Addresses scanned: I2C 0x2c - 0x2e
- Datasheet: http://focus.ti.com/docs/prod/folders/print/thmc50.html
+ Datasheet: http://www.ti.com/
Author: Krzysztof Helt <krzysztof.h1@wp.pl>
diff --git a/Documentation/hwmon/tmp102 b/Documentation/hwmon/tmp102
new file mode 100644
index 00000000000..8454a776312
--- /dev/null
+++ b/Documentation/hwmon/tmp102
@@ -0,0 +1,26 @@
+Kernel driver tmp102
+====================
+
+Supported chips:
+ * Texas Instruments TMP102
+ Prefix: 'tmp102'
+ Addresses scanned: none
+ Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp102.html
+
+Author:
+ Steven King <sfking@fdwdc.com>
+
+Description
+-----------
+
+The Texas Instruments TMP102 implements one temperature sensor. Limits can be
+set through the Overtemperature Shutdown register and Hysteresis register. The
+sensor is accurate to 0.5 degree over the range of -25 to +85 C, and to 1.0
+degree from -40 to +125 C. Resolution of the sensor is 0.0625 degree. The
+operating temperature has a minimum of -55 C and a maximum of +150 C.
+
+The TMP102 has a programmable update rate that can select between 8, 4, 1, and
+0.5 Hz. (Currently the driver only supports the default of 4 Hz).
+
+The driver provides the common sysfs-interface for temperatures (see
+Documentation/hwmon/sysfs-interface under Temperatures).
diff --git a/Documentation/hwmon/via686a b/Documentation/hwmon/via686a
index d651b25f751..e5f90ab5c48 100644
--- a/Documentation/hwmon/via686a
+++ b/Documentation/hwmon/via686a
@@ -5,7 +5,7 @@ Supported chips:
* Via VT82C686A, VT82C686B Southbridge Integrated Hardware Monitor
Prefix: 'via686a'
Addresses scanned: ISA in PCI-space encoded address
- Datasheet: On request through web form (http://www.via.com.tw/en/support/datasheets/)
+ Datasheet: On request through web form (http://www.via.com.tw/en/resources/download-center/)
Authors:
Kyösti Mälkki <kmalkki@cc.hut.fi>,
diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf
index b7e42ec4b26..13d556112fc 100644
--- a/Documentation/hwmon/w83627ehf
+++ b/Documentation/hwmon/w83627ehf
@@ -20,6 +20,10 @@ Supported chips:
Prefix: 'w83667hg'
Addresses scanned: ISA address retrieved from Super I/O registers
Datasheet: not available
+ * Winbond W83667HG-B
+ Prefix: 'w83667hg'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ Datasheet: Available from Nuvoton upon request
Authors:
Jean Delvare <khali@linux-fr.org>
@@ -32,8 +36,8 @@ Description
-----------
This driver implements support for the Winbond W83627EHF, W83627EHG,
-W83627DHG, W83627DHG-P and W83667HG super I/O chips. We will refer to them
-collectively as Winbond chips.
+W83627DHG, W83627DHG-P, W83667HG and W83667HG-B super I/O chips.
+We will refer to them collectively as Winbond chips.
The chips implement three temperature sensors, five fan rotation
speed sensors, ten analog voltage sensors (only nine for the 627DHG), one
@@ -68,14 +72,15 @@ follows:
temp1 -> pwm1
temp2 -> pwm2
temp3 -> pwm3
-prog -> pwm4 (not on 667HG; the programmable setting is not supported by
- the driver)
+prog -> pwm4 (not on 667HG and 667HG-B; the programmable setting is not
+ supported by the driver)
/sys files
----------
name - this is a standard hwmon device entry. For the W83627EHF and W83627EHG,
- it is set to "w83627ehf" and for the W83627DHG it is set to "w83627dhg"
+ it is set to "w83627ehf", for the W83627DHG it is set to "w83627dhg",
+ and for the W83667HG it is set to "w83667hg".
pwm[1-4] - this file stores PWM duty cycle or DC value (fan speed) in range:
0 (stop) to 255 (full)
diff --git a/Documentation/hwmon/w83627hf b/Documentation/hwmon/w83627hf
index 44dd2bcc72b..fb145e5e722 100644
--- a/Documentation/hwmon/w83627hf
+++ b/Documentation/hwmon/w83627hf
@@ -5,23 +5,19 @@ Supported chips:
* Winbond W83627HF (ISA accesses ONLY)
Prefix: 'w83627hf'
Addresses scanned: ISA address retrieved from Super I/O registers
- Datasheet: http://www.winbond.com/PDF/sheet/w83627hf.pdf
* Winbond W83627THF
Prefix: 'w83627thf'
Addresses scanned: ISA address retrieved from Super I/O registers
- Datasheet: http://www.winbond.com/PDF/sheet/w83627thf.pdf
* Winbond W83697HF
Prefix: 'w83697hf'
Addresses scanned: ISA address retrieved from Super I/O registers
- Datasheet: http://www.winbond.com/PDF/sheet/697hf.pdf
* Winbond W83637HF
Prefix: 'w83637hf'
Addresses scanned: ISA address retrieved from Super I/O registers
- Datasheet: http://www.winbond.com/PDF/sheet/w83637hf.pdf
* Winbond W83687THF
Prefix: 'w83687thf'
Addresses scanned: ISA address retrieved from Super I/O registers
- Datasheet: Provided by Winbond on request
+ Datasheet: Provided by Winbond on request(http://www.winbond.com/hq/enu)
Authors:
Frodo Looijaard <frodol@dds.nl>,
diff --git a/Documentation/hwmon/w83781d b/Documentation/hwmon/w83781d
index c91e0b63ea1..ecbc1e4574b 100644
--- a/Documentation/hwmon/w83781d
+++ b/Documentation/hwmon/w83781d
@@ -9,7 +9,7 @@ Supported chips:
* Winbond W83782D
Prefix: 'w83782d'
Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
- Datasheet: http://www.winbond.com/PDF/sheet/w83782d.pdf
+ Datasheet: http://www.winbond.com
* Winbond W83783S
Prefix: 'w83783s'
Addresses scanned: I2C 0x2d
diff --git a/Documentation/hwmon/w83792d b/Documentation/hwmon/w83792d
index 14a668ed8aa..8a023ce0b72 100644
--- a/Documentation/hwmon/w83792d
+++ b/Documentation/hwmon/w83792d
@@ -5,7 +5,7 @@ Supported chips:
* Winbond W83792D
Prefix: 'w83792d'
Addresses scanned: I2C 0x2c - 0x2f
- Datasheet: http://www.winbond.com.tw/E-WINBONDHTM/partner/PDFresult.asp?Pname=1035
+ Datasheet: http://www.winbond.com.tw
Author: Chunhao Huang
Contact: DZShen <DZShen@Winbond.com.tw>
diff --git a/Documentation/i2c/busses/i2c-ali1535 b/Documentation/i2c/busses/i2c-ali1535
index 0db3b4c74ad..5d46342e486 100644
--- a/Documentation/i2c/busses/i2c-ali1535
+++ b/Documentation/i2c/busses/i2c-ali1535
@@ -3,15 +3,15 @@ Kernel driver i2c-ali1535
Supported adapters:
* Acer Labs, Inc. ALI 1535 (south bridge)
Datasheet: Now under NDA
- http://www.ali.com.tw/eng/support/datasheet_request.php
+ http://www.ali.com.tw/
Authors:
- Frodo Looijaard <frodol@dds.nl>,
+ Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Mark D. Studebaker <mdsxyz123@yahoo.com>,
Dan Eaton <dan.eaton@rocketlogix.com>,
Stephen Rousset<stephen.rousset@rocketlogix.com>
-
+
Description
-----------
diff --git a/Documentation/i2c/busses/i2c-ali1563 b/Documentation/i2c/busses/i2c-ali1563
index 99ad4b9bcc3..41b1a077e4c 100644
--- a/Documentation/i2c/busses/i2c-ali1563
+++ b/Documentation/i2c/busses/i2c-ali1563
@@ -3,7 +3,7 @@ Kernel driver i2c-ali1563
Supported adapters:
* Acer Labs, Inc. ALI 1563 (south bridge)
Datasheet: Now under NDA
- http://www.ali.com.tw/eng/support/datasheet_request.php
+ http://www.ali.com.tw/
Author: Patrick Mochel <mochel@digitalimplant.org>
@@ -18,7 +18,7 @@ For an overview of these chips see http://www.acerlabs.com
The M1563 southbridge is deceptively similar to the M1533, with a few
notable exceptions. One of those happens to be the fact they upgraded the
i2c core to be SMBus 2.0 compliant, and happens to be almost identical to
-the i2c controller found in the Intel 801 south bridges.
+the i2c controller found in the Intel 801 south bridges.
Features
--------
diff --git a/Documentation/i2c/busses/i2c-ali15x3 b/Documentation/i2c/busses/i2c-ali15x3
index ff28d381beb..42888d8ac12 100644
--- a/Documentation/i2c/busses/i2c-ali15x3
+++ b/Documentation/i2c/busses/i2c-ali15x3
@@ -3,11 +3,11 @@ Kernel driver i2c-ali15x3
Supported adapters:
* Acer Labs, Inc. ALI 1533 and 1543C (south bridge)
Datasheet: Now under NDA
- http://www.ali.com.tw/eng/support/datasheet_request.php
+ http://www.ali.com.tw/
Authors:
- Frodo Looijaard <frodol@dds.nl>,
- Philip Edelbrock <phil@netroedge.com>,
+ Frodo Looijaard <frodol@dds.nl>,
+ Philip Edelbrock <phil@netroedge.com>,
Mark D. Studebaker <mdsxyz123@yahoo.com>
Module Parameters
@@ -40,10 +40,10 @@ M1541 and M1543C South Bridges.
The M1543C is a South bridge for desktop systems.
The M1541 is a South bridge for portable systems.
They are part of the following ALI chipsets:
-
- * "Aladdin Pro 2" includes the M1621 Slot 1 North bridge with AGP and
+
+ * "Aladdin Pro 2" includes the M1621 Slot 1 North bridge with AGP and
100MHz CPU Front Side bus
- * "Aladdin V" includes the M1541 Socket 7 North bridge with AGP and 100MHz
+ * "Aladdin V" includes the M1541 Socket 7 North bridge with AGP and 100MHz
CPU Front Side bus
Some Aladdin V motherboards:
Asus P5A
@@ -77,7 +77,7 @@ output of lspci will show something similar to the following:
** then run lspci.
** If you see the 1533 and 5229 devices but NOT the 7101 device,
** then you must enable ACPI, the PMU, SMB, or something similar
-** in the BIOS.
+** in the BIOS.
** The driver won't work if it can't find the M7101 device.
The SMB controller is part of the M7101 device, which is an ACPI-compliant
@@ -87,8 +87,8 @@ The whole M7101 device has to be enabled for the SMB to work. You can't
just enable the SMB alone. The SMB and the ACPI have separate I/O spaces.
We make sure that the SMB is enabled. We leave the ACPI alone.
-Features
---------
+Features
+--------
This driver controls the SMB Host only. The SMB Slave
controller on the M15X3 is not enabled. This driver does not use
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index 81c0c59a60e..e307914a3ed 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -15,7 +15,8 @@ Supported adapters:
* Intel 82801I (ICH9)
* Intel EP80579 (Tolapai)
* Intel 82801JI (ICH10)
- * Intel PCH
+ * Intel 3400/5 Series (PCH)
+ * Intel Cougar Point (PCH)
Datasheets: Publicly available at the Intel website
Authors:
@@ -26,7 +27,13 @@ Authors:
Module Parameters
-----------------
-None.
+* disable_features (bit vector)
+Disable selected features normally supported by the device. This makes it
+possible to work around possible driver or hardware bugs if the feature in
+question doesn't work as intended for whatever reason. Bit values:
+ 1 disable SMBus PEC
+ 2 disable the block buffer
+ 8 disable the I2C block read functionality
Description
diff --git a/Documentation/i2c/busses/i2c-parport b/Documentation/i2c/busses/i2c-parport
index dceaba1ad93..2461c7b53b2 100644
--- a/Documentation/i2c/busses/i2c-parport
+++ b/Documentation/i2c/busses/i2c-parport
@@ -29,6 +29,9 @@ can be easily added when needed.
Earlier kernels defaulted to type=0 (Philips). But now, if the type
parameter is missing, the driver will simply fail to initialize.
+SMBus alert support is available on adapters which have this line properly
+connected to the parallel port's interrupt pin.
+
Building your own adapter
-------------------------
diff --git a/Documentation/i2c/busses/i2c-parport-light b/Documentation/i2c/busses/i2c-parport-light
index 28743647852..bdc9cbb2e0f 100644
--- a/Documentation/i2c/busses/i2c-parport-light
+++ b/Documentation/i2c/busses/i2c-parport-light
@@ -9,3 +9,14 @@ parport handling is not an option. The drawback is a reduced portability
and the impossibility to daisy-chain other parallel port devices.
Please see i2c-parport for documentation.
+
+Module parameters:
+
+* type: type of adapter (see i2c-parport or modinfo)
+
+* base: base I/O address
+ Default is 0x378 which is fairly common for parallel ports, at least on PC.
+
+* irq: optional IRQ
+ This must be passed if you want SMBus alert support, assuming your adapter
+ actually supports this.
diff --git a/Documentation/i2c/busses/i2c-pca-isa b/Documentation/i2c/busses/i2c-pca-isa
index 6fc8f4c27c3..b044e526548 100644
--- a/Documentation/i2c/busses/i2c-pca-isa
+++ b/Documentation/i2c/busses/i2c-pca-isa
@@ -1,10 +1,10 @@
Kernel driver i2c-pca-isa
Supported adapters:
-This driver supports ISA boards using the Philips PCA 9564
-Parallel bus to I2C bus controller
+This driver supports ISA boards using the Philips PCA 9564
+Parallel bus to I2C bus controller
-Author: Ian Campbell <icampbell@arcom.com>, Arcom Control Systems
+Author: Ian Campbell <icampbell@arcom.com>, Arcom Control Systems
Module Parameters
-----------------
@@ -12,12 +12,12 @@ Module Parameters
* base int
I/O base address
* irq int
- IRQ interrupt
-* clock int
+ IRQ interrupt
+* clock int
Clock rate as described in table 1 of PCA9564 datasheet
Description
-----------
-This driver supports ISA boards using the Philips PCA 9564
-Parallel bus to I2C bus controller
+This driver supports ISA boards using the Philips PCA 9564
+Parallel bus to I2C bus controller
diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4
index ac540c71c7e..475bb4ae072 100644
--- a/Documentation/i2c/busses/i2c-piix4
+++ b/Documentation/i2c/busses/i2c-piix4
@@ -97,4 +97,4 @@ of all affected systems, so the only safe solution was to prevent access to
the SMBus on all IBM systems (detected using DMI data.)
For additional information, read:
-http://www.lm-sensors.org/browser/lm-sensors/trunk/README.thinkpad
+http://www.lm-sensors.org/browser/lm-sensors/trunk/README
diff --git a/Documentation/i2c/busses/i2c-sis5595 b/Documentation/i2c/busses/i2c-sis5595
index cc47db7d00a..ecd21fb49a8 100644
--- a/Documentation/i2c/busses/i2c-sis5595
+++ b/Documentation/i2c/busses/i2c-sis5595
@@ -1,41 +1,41 @@
Kernel driver i2c-sis5595
-Authors:
+Authors:
Frodo Looijaard <frodol@dds.nl>,
Mark D. Studebaker <mdsxyz123@yahoo.com>,
- Philip Edelbrock <phil@netroedge.com>
+ Philip Edelbrock <phil@netroedge.com>
Supported adapters:
* Silicon Integrated Systems Corp. SiS5595 Southbridge
Datasheet: Publicly available at the Silicon Integrated Systems Corp. site.
-Note: all have mfr. ID 0x1039.
-
- SUPPORTED PCI ID
- 5595 0008
-
- Note: these chips contain a 0008 device which is incompatible with the
- 5595. We recognize these by the presence of the listed
- "blacklist" PCI ID and refuse to load.
-
- NOT SUPPORTED PCI ID BLACKLIST PCI ID
- 540 0008 0540
- 550 0008 0550
- 5513 0008 5511
- 5581 0008 5597
- 5582 0008 5597
- 5597 0008 5597
- 5598 0008 5597/5598
- 630 0008 0630
- 645 0008 0645
- 646 0008 0646
- 648 0008 0648
- 650 0008 0650
- 651 0008 0651
- 730 0008 0730
- 735 0008 0735
- 745 0008 0745
- 746 0008 0746
+Note: all have mfr. ID 0x1039.
+
+ SUPPORTED PCI ID
+ 5595 0008
+
+ Note: these chips contain a 0008 device which is incompatible with the
+ 5595. We recognize these by the presence of the listed
+ "blacklist" PCI ID and refuse to load.
+
+ NOT SUPPORTED PCI ID BLACKLIST PCI ID
+ 540 0008 0540
+ 550 0008 0550
+ 5513 0008 5511
+ 5581 0008 5597
+ 5582 0008 5597
+ 5597 0008 5597
+ 5598 0008 5597/5598
+ 630 0008 0630
+ 645 0008 0645
+ 646 0008 0646
+ 648 0008 0648
+ 650 0008 0650
+ 651 0008 0651
+ 730 0008 0730
+ 735 0008 0735
+ 745 0008 0745
+ 746 0008 0746
Module Parameters
-----------------
diff --git a/Documentation/i2c/busses/i2c-sis630 b/Documentation/i2c/busses/i2c-sis630
index 9aca6889f74..0b969736693 100644
--- a/Documentation/i2c/busses/i2c-sis630
+++ b/Documentation/i2c/busses/i2c-sis630
@@ -2,7 +2,7 @@ Kernel driver i2c-sis630
Supported adapters:
* Silicon Integrated Systems Corp (SiS)
- 630 chipset (Datasheet: available at http://amalysh.bei.t-online.de/docs/SIS/)
+ 630 chipset (Datasheet: available at http://www.sfr-fresh.com/linux)
730 chipset
* Possible other SiS chipsets ?
@@ -14,9 +14,9 @@ Module Parameters
* force = [1|0] Forcibly enable the SIS630. DANGEROUS!
This can be interesting for chipsets not named
above to check if it works for you chipset, but DANGEROUS!
-
-* high_clock = [1|0] Forcibly set Host Master Clock to 56KHz (default,
- what your BIOS use). DANGEROUS! This should be a bit
+
+* high_clock = [1|0] Forcibly set Host Master Clock to 56KHz (default,
+ what your BIOS use). DANGEROUS! This should be a bit
faster, but freeze some systems (i.e. my Laptop).
@@ -44,6 +44,6 @@ Philip Edelbrock <phil@netroedge.com>
- testing SiS730 support
Mark M. Hoffman <mhoffman@lightlink.com>
- bug fixes
-
+
To anyone else which I forgot here ;), thanks!
diff --git a/Documentation/i2c/instantiating-devices b/Documentation/i2c/instantiating-devices
index e89490270ab..87da405a859 100644
--- a/Documentation/i2c/instantiating-devices
+++ b/Documentation/i2c/instantiating-devices
@@ -102,7 +102,7 @@ static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev)
memset(&i2c_info, 0, sizeof(struct i2c_board_info));
strlcpy(i2c_info.name, "isp1301_pnx", I2C_NAME_SIZE);
isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info,
- normal_i2c);
+ normal_i2c, NULL);
i2c_put_adapter(i2c_adap);
(...)
}
diff --git a/Documentation/i2c/smbus-protocol b/Documentation/i2c/smbus-protocol
index 9df47441f0e..7c19d1a2bea 100644
--- a/Documentation/i2c/smbus-protocol
+++ b/Documentation/i2c/smbus-protocol
@@ -185,6 +185,22 @@ the protocol. All ARP communications use slave address 0x61 and
require PEC checksums.
+SMBus Alert
+===========
+
+SMBus Alert was introduced in Revision 1.0 of the specification.
+
+The SMBus alert protocol allows several SMBus slave devices to share a
+single interrupt pin on the SMBus master, while still allowing the master
+to know which slave triggered the interrupt.
+
+This is implemented the following way in the Linux kernel:
+* I2C bus drivers which support SMBus alert should call
+ i2c_setup_smbus_alert() to setup SMBus alert support.
+* I2C drivers for devices which can trigger SMBus alerts should implement
+ the optional alert() callback.
+
+
I2C Block Transactions
======================
diff --git a/Documentation/i2c/ten-bit-addresses b/Documentation/i2c/ten-bit-addresses
index 200074f8136..e9890709c50 100644
--- a/Documentation/i2c/ten-bit-addresses
+++ b/Documentation/i2c/ten-bit-addresses
@@ -1,17 +1,17 @@
-The I2C protocol knows about two kinds of device addresses: normal 7 bit
+The I2C protocol knows about two kinds of device addresses: normal 7 bit
addresses, and an extended set of 10 bit addresses. The sets of addresses
do not intersect: the 7 bit address 0x10 is not the same as the 10 bit
address 0x10 (though a single device could respond to both of them). You
select a 10 bit address by adding an extra byte after the address
byte:
- S Addr7 Rd/Wr ....
+ S Addr7 Rd/Wr ....
becomes
S 11110 Addr10 Rd/Wr
S is the start bit, Rd/Wr the read/write bit, and if you count the number
of bits, you will see the there are 8 after the S bit for 7 bit addresses,
and 16 after the S bit for 10 bit addresses.
-WARNING! The current 10 bit address support is EXPERIMENTAL. There are
+WARNING! The current 10 bit address support is EXPERIMENTAL. There are
several places in the code that will cause SEVERE PROBLEMS with 10 bit
addresses, even though there is some basic handling and hooks. Also,
almost no supported adapter handles the 10 bit addresses correctly.
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
index 0a74603eb67..5ebf5af1d71 100644
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -74,6 +74,11 @@ structure at all. You should use this to keep device-specific data.
/* retrieve the value */
void *i2c_get_clientdata(const struct i2c_client *client);
+Note that starting with kernel 2.6.34, you don't have to set the `data' field
+to NULL in remove() or if probe() failed anymore. The i2c-core does this
+automatically on these occasions. Those are also the only times the core will
+touch this field.
+
Accessing the client
====================
@@ -318,8 +323,9 @@ Plain I2C communication
These routines read and write some bytes from/to a client. The client
contains the i2c address, so you do not have to include it. The second
parameter contains the bytes to read/write, the third the number of bytes
-to read/write (must be less than the length of the buffer.) Returned is
-the actual number of bytes read/written.
+to read/write (must be less than the length of the buffer, also should be
+less than 64k since msg.len is u16.) Returned is the actual number of bytes
+read/written.
int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msg,
int num);
diff --git a/Documentation/ia64/aliasing.txt b/Documentation/ia64/aliasing.txt
index aa3e953f0f7..5a4dea6abeb 100644
--- a/Documentation/ia64/aliasing.txt
+++ b/Documentation/ia64/aliasing.txt
@@ -168,8 +168,6 @@ PAST PROBLEM CASES
mmap of 0x0-0x9FFFF /dev/mem by "hwinfo" on HP sx1000 with VGA enabled
- See https://bugzilla.novell.com/show_bug.cgi?id=140858.
-
The EFI memory map reports the following attributes:
0x00000-0x9FFFF WB only
0xA0000-0xBFFFF UC only (VGA frame buffer)
diff --git a/Documentation/ia64/serial.txt b/Documentation/ia64/serial.txt
index 040b9773209..6869c73de4e 100644
--- a/Documentation/ia64/serial.txt
+++ b/Documentation/ia64/serial.txt
@@ -133,7 +133,7 @@ TROUBLESHOOTING SERIAL CONSOLE PROBLEMS
-[1] http://www.dig64.org/specifications/DIG64_PCDPv20.pdf
+[1] http://www.dig64.org/specifications/agreement
The table was originally defined as the "HCDP" for "Headless
Console/Debug Port." The current version is the "PCDP" for
"Primary Console and Debug Port Devices."
diff --git a/Documentation/infiniband/user_verbs.txt b/Documentation/infiniband/user_verbs.txt
index afe3f8da901..e5092d696da 100644
--- a/Documentation/infiniband/user_verbs.txt
+++ b/Documentation/infiniband/user_verbs.txt
@@ -5,7 +5,7 @@ USERSPACE VERBS ACCESS
described in chapter 11 of the InfiniBand Architecture Specification.
To use the verbs, the libibverbs library, available from
- <http://openib.org/>, is required. libibverbs contains a
+ http://www.openfabrics.org/, is required. libibverbs contains a
device-independent API for using the ib_uverbs interface.
libibverbs also requires appropriate device-dependent kernel and
userspace driver for your InfiniBand hardware. For example, to use
diff --git a/Documentation/init.txt b/Documentation/init.txt
new file mode 100644
index 00000000000..535ad5e82b9
--- /dev/null
+++ b/Documentation/init.txt
@@ -0,0 +1,49 @@
+Explaining the dreaded "No init found." boot hang message
+=========================================================
+
+OK, so you've got this pretty unintuitive message (currently located
+in init/main.c) and are wondering what the H*** went wrong.
+Some high-level reasons for failure (listed roughly in order of execution)
+to load the init binary are:
+A) Unable to mount root FS
+B) init binary doesn't exist on rootfs
+C) broken console device
+D) binary exists but dependencies not available
+E) binary cannot be loaded
+
+Detailed explanations:
+0) Set "debug" kernel parameter (in bootloader config file or CONFIG_CMDLINE)
+ to get more detailed kernel messages.
+A) make sure you have the correct root FS type
+ (and root= kernel parameter points to the correct partition),
+ required drivers such as storage hardware (such as SCSI or USB!)
+ and filesystem (ext3, jffs2 etc.) are builtin (alternatively as modules,
+ to be pre-loaded by an initrd)
+C) Possibly a conflict in console= setup --> initial console unavailable.
+ E.g. some serial consoles are unreliable due to serial IRQ issues (e.g.
+ missing interrupt-based configuration).
+ Try using a different console= device or e.g. netconsole= .
+D) e.g. required library dependencies of the init binary such as
+ /lib/ld-linux.so.2 missing or broken. Use readelf -d <INIT>|grep NEEDED
+ to find out which libraries are required.
+E) make sure the binary's architecture matches your hardware.
+ E.g. i386 vs. x86_64 mismatch, or trying to load x86 on ARM hardware.
+ In case you tried loading a non-binary file here (shell script?),
+ you should make sure that the script specifies an interpreter in its shebang
+ header line (#!/...) that is fully working (including its library
+ dependencies). And before tackling scripts, better first test a simple
+ non-script binary such as /bin/sh and confirm its successful execution.
+ To find out more, add code to init/main.c to display kernel_execve()s
+ return values.
+
+Please extend this explanation whenever you find new failure causes
+(after all loading the init binary is a CRITICAL and hard transition step
+which needs to be made as painless as possible), then submit patch to LKML.
+Further TODOs:
+- Implement the various run_init_process() invocations via a struct array
+ which can then store the kernel_execve() result value and on failure
+ log it all by iterating over _all_ results (very important usability fix).
+- try to make the implementation itself more helpful in general,
+ e.g. by providing additional error messages at affected places.
+
+Andreas Mohr <andi at lisas period de>
diff --git a/Documentation/input/appletouch.txt b/Documentation/input/appletouch.txt
index 4f7c633a76d..b13de3f8910 100644
--- a/Documentation/input/appletouch.txt
+++ b/Documentation/input/appletouch.txt
@@ -82,4 +82,4 @@ Links:
------
[1]: http://johannes.sipsolutions.net/PowerBook/touchpad/
-[2]: http://web.telia.com/~u89404340/touchpad/index.html
+[2]: http://web.archive.org/web/*/http://web.telia.com/~u89404340/touchpad/index.html
diff --git a/Documentation/input/bcm5974.txt b/Documentation/input/bcm5974.txt
index 5e22dcf6d48..74d3876d6f3 100644
--- a/Documentation/input/bcm5974.txt
+++ b/Documentation/input/bcm5974.txt
@@ -62,4 +62,4 @@ Links
-----
[1] http://ubuntuforums.org/showthread.php?t=840040
-[2] http://http://bitmath.org/code/
+[2] http://bitmath.org/code/
diff --git a/Documentation/input/elantech.txt b/Documentation/input/elantech.txt
index a10c3b6ba7c..56941ae1f5d 100644
--- a/Documentation/input/elantech.txt
+++ b/Documentation/input/elantech.txt
@@ -333,14 +333,14 @@ byte 0:
byte 1:
bit 7 6 5 4 3 2 1 0
- x15 x14 x13 x12 x11 x10 x9 x8
+ . . . . . x10 x9 x8
byte 2:
bit 7 6 5 4 3 2 1 0
x7 x6 x5 x4 x4 x2 x1 x0
- x15..x0 = absolute x value (horizontal)
+ x10..x0 = absolute x value (horizontal)
byte 3:
@@ -350,14 +350,14 @@ byte 3:
byte 4:
bit 7 6 5 4 3 2 1 0
- y15 y14 y13 y12 y11 y10 y8 y8
+ . . . . . . y9 y8
byte 5:
bit 7 6 5 4 3 2 1 0
y7 y6 y5 y4 y3 y2 y1 y0
- y15..y0 = absolute y value (vertical)
+ y9..y0 = absolute y value (vertical)
4.2.2 Two finger touch
diff --git a/Documentation/input/iforce-protocol.txt b/Documentation/input/iforce-protocol.txt
index 3ac92413c87..2d5fbfd6023 100644
--- a/Documentation/input/iforce-protocol.txt
+++ b/Documentation/input/iforce-protocol.txt
@@ -251,7 +251,7 @@ Check www.immerse.com for Immersion Studio, and www.fcoder.com for ComPortSpy.
** Author of this document **
Johann Deneux <johann.deneux@gmail.com>
-Home page at http://www.esil.univ-mrs.fr/~jdeneux/projects/ff/
+Home page at http://web.archive.org/web/*/http://www.esil.univ-mrs.fr
Additions by Vojtech Pavlik.
diff --git a/Documentation/input/joystick.txt b/Documentation/input/joystick.txt
index 154d767b2ac..8007b7ca87b 100644
--- a/Documentation/input/joystick.txt
+++ b/Documentation/input/joystick.txt
@@ -402,7 +402,7 @@ for the port of the SoundFusion is supported by the cs461x.c module.
~~~~~~~~~~~~~~~~~~~~~~~~
The Live! has a special PCI gameport, which, although it doesn't provide
any "Enhanced" stuff like 4DWave and friends, is quite a bit faster than
-it's ISA counterparts. It also requires special support, hence the
+its ISA counterparts. It also requires special support, hence the
emu10k1-gp.c module for it instead of the normal ns558.c one.
3.15 SoundBlaster 64 and 128 - ES1370 and ES1371, ESS Solo1 and S3 SonicVibes
diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt
index 8490480ce43..bdcba154b83 100644
--- a/Documentation/input/multi-touch-protocol.txt
+++ b/Documentation/input/multi-touch-protocol.txt
@@ -6,31 +6,149 @@ Multi-touch (MT) Protocol
Introduction
------------
-In order to utilize the full power of the new multi-touch devices, a way to
-report detailed finger data to user space is needed. This document
-describes the multi-touch (MT) protocol which allows kernel drivers to
-report details for an arbitrary number of fingers.
+In order to utilize the full power of the new multi-touch and multi-user
+devices, a way to report detailed data from multiple contacts, i.e.,
+objects in direct contact with the device surface, is needed. This
+document describes the multi-touch (MT) protocol which allows kernel
+drivers to report details for an arbitrary number of contacts.
+
+The protocol is divided into two types, depending on the capabilities of the
+hardware. For devices handling anonymous contacts (type A), the protocol
+describes how to send the raw data for all contacts to the receiver. For
+devices capable of tracking identifiable contacts (type B), the protocol
+describes how to send updates for individual contacts via event slots.
+
+
+Protocol Usage
+--------------
+
+Contact details are sent sequentially as separate packets of ABS_MT
+events. Only the ABS_MT events are recognized as part of a contact
+packet. Since these events are ignored by current single-touch (ST)
+applications, the MT protocol can be implemented on top of the ST protocol
+in an existing driver.
+
+Drivers for type A devices separate contact packets by calling
+input_mt_sync() at the end of each packet. This generates a SYN_MT_REPORT
+event, which instructs the receiver to accept the data for the current
+contact and prepare to receive another.
+
+Drivers for type B devices separate contact packets by calling
+input_mt_slot(), with a slot as argument, at the beginning of each packet.
+This generates an ABS_MT_SLOT event, which instructs the receiver to
+prepare for updates of the given slot.
+
+All drivers mark the end of a multi-touch transfer by calling the usual
+input_sync() function. This instructs the receiver to act upon events
+accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new set
+of events/packets.
+
+The main difference between the stateless type A protocol and the stateful
+type B slot protocol lies in the usage of identifiable contacts to reduce
+the amount of data sent to userspace. The slot protocol requires the use of
+the ABS_MT_TRACKING_ID, either provided by the hardware or computed from
+the raw data [5].
+
+For type A devices, the kernel driver should generate an arbitrary
+enumeration of the full set of anonymous contacts currently on the
+surface. The order in which the packets appear in the event stream is not
+important. Event filtering and finger tracking is left to user space [3].
+
+For type B devices, the kernel driver should associate a slot with each
+identified contact, and use that slot to propagate changes for the contact.
+Creation, replacement and destruction of contacts is achieved by modifying
+the ABS_MT_TRACKING_ID of the associated slot. A non-negative tracking id
+is interpreted as a contact, and the value -1 denotes an unused slot. A
+tracking id not previously present is considered new, and a tracking id no
+longer present is considered removed. Since only changes are propagated,
+the full state of each initiated contact has to reside in the receiving
+end. Upon receiving an MT event, one simply updates the appropriate
+attribute of the current slot.
+
+
+Protocol Example A
+------------------
+
+Here is what a minimal event sequence for a two-contact touch would look
+like for a type A device:
+
+ ABS_MT_POSITION_X x[0]
+ ABS_MT_POSITION_Y y[0]
+ SYN_MT_REPORT
+ ABS_MT_POSITION_X x[1]
+ ABS_MT_POSITION_Y y[1]
+ SYN_MT_REPORT
+ SYN_REPORT
+The sequence after moving one of the contacts looks exactly the same; the
+raw data for all present contacts are sent between every synchronization
+with SYN_REPORT.
-Usage
------
+Here is the sequence after lifting the first contact:
-Anonymous finger details are sent sequentially as separate packets of ABS
-events. Only the ABS_MT events are recognized as part of a finger
-packet. The end of a packet is marked by calling the input_mt_sync()
-function, which generates a SYN_MT_REPORT event. This instructs the
-receiver to accept the data for the current finger and prepare to receive
-another. The end of a multi-touch transfer is marked by calling the usual
-input_sync() function. This instructs the receiver to act upon events
-accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new
-set of events/packets.
+ ABS_MT_POSITION_X x[1]
+ ABS_MT_POSITION_Y y[1]
+ SYN_MT_REPORT
+ SYN_REPORT
+
+And here is the sequence after lifting the second contact:
+
+ SYN_MT_REPORT
+ SYN_REPORT
+
+If the driver reports one of BTN_TOUCH or ABS_PRESSURE in addition to the
+ABS_MT events, the last SYN_MT_REPORT event may be omitted. Otherwise, the
+last SYN_REPORT will be dropped by the input core, resulting in no
+zero-contact event reaching userland.
+
+
+Protocol Example B
+------------------
+
+Here is what a minimal event sequence for a two-contact touch would look
+like for a type B device:
+
+ ABS_MT_SLOT 0
+ ABS_MT_TRACKING_ID 45
+ ABS_MT_POSITION_X x[0]
+ ABS_MT_POSITION_Y y[0]
+ ABS_MT_SLOT 1
+ ABS_MT_TRACKING_ID 46
+ ABS_MT_POSITION_X x[1]
+ ABS_MT_POSITION_Y y[1]
+ SYN_REPORT
+
+Here is the sequence after moving contact 45 in the x direction:
+
+ ABS_MT_SLOT 0
+ ABS_MT_POSITION_X x[0]
+ SYN_REPORT
+
+Here is the sequence after lifting the contact in slot 0:
+
+ ABS_MT_TRACKING_ID -1
+ SYN_REPORT
+
+The slot being modified is already 0, so the ABS_MT_SLOT is omitted. The
+message removes the association of slot 0 with contact 45, thereby
+destroying contact 45 and freeing slot 0 to be reused for another contact.
+
+Finally, here is the sequence after lifting the second contact:
+
+ ABS_MT_SLOT 1
+ ABS_MT_TRACKING_ID -1
+ SYN_REPORT
+
+
+Event Usage
+-----------
A set of ABS_MT events with the desired properties is defined. The events
are divided into categories, to allow for partial implementation. The
minimum set consists of ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which
-allows for multiple fingers to be tracked. If the device supports it, the
+allows for multiple contacts to be tracked. If the device supports it, the
ABS_MT_TOUCH_MAJOR and ABS_MT_WIDTH_MAJOR may be used to provide the size
-of the contact area and approaching finger, respectively.
+of the contact area and approaching contact, respectively.
The TOUCH and WIDTH parameters have a geometrical interpretation; imagine
looking through a window at someone gently holding a finger against the
@@ -41,40 +159,26 @@ ABS_MT_TOUCH_MAJOR, the diameter of the outer region is
ABS_MT_WIDTH_MAJOR. Now imagine the person pressing the finger harder
against the glass. The inner region will increase, and in general, the
ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller than
-unity, is related to the finger pressure. For pressure-based devices,
+unity, is related to the contact pressure. For pressure-based devices,
ABS_MT_PRESSURE may be used to provide the pressure on the contact area
instead.
-In addition to the MAJOR parameters, the oval shape of the finger can be
+In addition to the MAJOR parameters, the oval shape of the contact can be
described by adding the MINOR parameters, such that MAJOR and MINOR are the
major and minor axis of an ellipse. Finally, the orientation of the oval
shape can be describe with the ORIENTATION parameter.
The ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
-finger or a pen or something else. Devices with more granular information
+contact or a pen or something else. Devices with more granular information
may specify general shapes as blobs, i.e., as a sequence of rectangular
shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
that currently support it, the ABS_MT_TRACKING_ID event may be used to
-report finger tracking from hardware [5].
-
-Here is what a minimal event sequence for a two-finger touch would look
-like:
-
- ABS_MT_POSITION_X
- ABS_MT_POSITION_Y
- SYN_MT_REPORT
- ABS_MT_POSITION_X
- ABS_MT_POSITION_Y
- SYN_MT_REPORT
- SYN_REPORT
+report contact tracking from hardware [5].
Event Semantics
---------------
-The word "contact" is used to describe a tool which is in direct contact
-with the surface. A finger, a pen or a rubber all classify as contacts.
-
ABS_MT_TOUCH_MAJOR
The length of the major axis of the contact. The length should be given in
@@ -141,15 +245,16 @@ MT_TOOL_PEN [2].
ABS_MT_BLOB_ID
The BLOB_ID groups several packets together into one arbitrarily shaped
-contact. This is a low-level anonymous grouping, and should not be confused
-with the high-level trackingID [5]. Most kernel drivers will not have blob
-capability, and can safely omit the event.
+contact. This is a low-level anonymous grouping for type A devices, and
+should not be confused with the high-level trackingID [5]. Most type A
+devices do not have blob capability, so drivers can safely omit this event.
ABS_MT_TRACKING_ID
The TRACKING_ID identifies an initiated contact throughout its life cycle
-[5]. There are currently only a few devices that support it, so this event
-should normally be omitted.
+[5]. This event is mandatory for type B devices. The value range of the
+TRACKING_ID should be large enough to ensure unique identification of a
+contact maintained over an extended period of time.
Event Computation
@@ -176,20 +281,11 @@ finger along the X axis (1).
Finger Tracking
---------------
-The kernel driver should generate an arbitrary enumeration of the set of
-anonymous contacts currently on the surface. The order in which the packets
-appear in the event stream is not important.
-
The process of finger tracking, i.e., to assign a unique trackingID to each
-initiated contact on the surface, is left to user space; preferably the
-multi-touch X driver [3]. In that driver, the trackingID stays the same and
-unique until the contact vanishes (when the finger leaves the surface). The
-problem of assigning a set of anonymous fingers to a set of identified
-fingers is a euclidian bipartite matching problem at each event update, and
-relies on a sufficiently rapid update rate.
-
-There are a few devices that support trackingID in hardware. User space can
-make use of these native identifiers to reduce bandwidth and cpu usage.
+initiated contact on the surface, is a Euclidian Bipartite Matching
+problem. At each event synchronization, the set of actual contacts is
+matched to the set of contacts from the previous synchronization. A full
+implementation can be found in [3].
Gestures
@@ -217,11 +313,6 @@ where examples can be found.
difference between the contact position and the approaching tool position
could be used to derive tilt.
[2] The list can of course be extended.
-[3] The multi-touch X driver is currently in the prototyping stage. At the
-time of writing (April 2009), the MT protocol is not yet merged, and the
-prototype implements finger matching, basic mouse support and two-finger
-scrolling. The project aims at improving the quality of current multi-touch
-functionality available in the Synaptics X driver, and in addition
-implement more advanced gestures.
+[3] Multitouch X driver project: http://bitmath.org/code/multitouch/.
[4] See the section on event computation.
[5] See the section on finger tracking.
diff --git a/Documentation/input/rotary-encoder.txt b/Documentation/input/rotary-encoder.txt
index 3a6aec40c0b..8b4129de1d2 100644
--- a/Documentation/input/rotary-encoder.txt
+++ b/Documentation/input/rotary-encoder.txt
@@ -75,7 +75,7 @@ and the number of steps or will clamp at the maximum and zero depending on
the configuration.
Because GPIO to IRQ mapping is platform specific, this information must
-be given in seperately to the driver. See the example below.
+be given in separately to the driver. See the example below.
---------<snip>---------
diff --git a/Documentation/input/sentelic.txt b/Documentation/input/sentelic.txt
index f7160a2fb6a..b2ef125b71f 100644
--- a/Documentation/input/sentelic.txt
+++ b/Documentation/input/sentelic.txt
@@ -1,5 +1,5 @@
-Copyright (C) 2002-2008 Sentelic Corporation.
-Last update: Oct-31-2008
+Copyright (C) 2002-2010 Sentelic Corporation.
+Last update: Jan-13-2010
==============================================================================
* Finger Sensing Pad Intellimouse Mode(scrolling wheel, 4th and 5th buttons)
@@ -44,7 +44,7 @@ B) MSID 6: Horizontal and Vertical scrolling.
Packet 1
Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
- 1 |Y|X|y|x|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 | | |B|F|l|r|u|d|
+ 1 |Y|X|y|x|1|M|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 | | |B|F|r|l|u|d|
|---------------| |---------------| |---------------| |---------------|
Byte 1: Bit7 => Y overflow
@@ -59,15 +59,15 @@ Byte 2: X Movement(9-bit 2's complement integers)
Byte 3: Y Movement(9-bit 2's complement integers)
Byte 4: Bit0 => the Vertical scrolling movement downward.
Bit1 => the Vertical scrolling movement upward.
- Bit2 => the Vertical scrolling movement rightward.
- Bit3 => the Vertical scrolling movement leftward.
+ Bit2 => the Horizontal scrolling movement leftward.
+ Bit3 => the Horizontal scrolling movement rightward.
Bit4 => 1 = 4th mouse button is pressed, Forward one page.
0 = 4th mouse button is not pressed.
Bit5 => 1 = 5th mouse button is pressed, Backward one page.
0 = 5th mouse button is not pressed.
C) MSID 7:
-# FSP uses 2 packets(8 Bytes) data to represent Absolute Position
+# FSP uses 2 packets (8 Bytes) to represent Absolute Position.
so we have PACKET NUMBER to identify packets.
If PACKET NUMBER is 0, the packet is Packet 1.
If PACKET NUMBER is 1, the packet is Packet 2.
@@ -129,7 +129,7 @@ Byte 3: Message Type => 0x00 (Disabled)
Byte 4: Bit7~Bit0 => Don't Care
==============================================================================
-* Absolute position for STL3888-A0.
+* Absolute position for STL3888-Ax.
==============================================================================
Packet 1 (ABSOLUTE POSITION)
Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
@@ -179,14 +179,14 @@ Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
Bit5~Bit4 => y2_g
Bit7~Bit6 => x2_g
-Notify Packet for STL3888-A0
+Notify Packet for STL3888-Ax
Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
1 |1|0|1|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|d|u|0|0|0|0|
|---------------| |---------------| |---------------| |---------------|
Byte 1: Bit7~Bit6 => 00, Normal data packet
- => 01, Absolute coordination packet
+ => 01, Absolute coordinates packet
=> 10, Notify packet
Bit5 => 1
Bit4 => when in absolute coordinates mode (valid when EN_PKT_GO is 1):
@@ -205,15 +205,106 @@ Byte 4: Bit7 => scroll right button
Bit6 => scroll left button
Bit5 => scroll down button
Bit4 => scroll up button
- * Note that if gesture and additional button (Bit4~Bit7)
- happen at the same time, the button information will not
- be sent.
+ * Note that if gesture and additional buttoni (Bit4~Bit7)
+ happen at the same time, the button information will not
+ be sent.
+ Bit3~Bit0 => Reserved
+
+Sample sequence of Multi-finger, Multi-coordinate mode:
+
+ notify packet (valid bit == 1), abs pkt 1, abs pkt 2, abs pkt 1,
+ abs pkt 2, ..., notify packet (valid bit == 0)
+
+==============================================================================
+* Absolute position for STL3888-B0.
+==============================================================================
+Packet 1(ABSOLUTE POSITION)
+ Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+ 1 |0|1|V|F|1|0|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|u|d|X|X|Y|Y|
+ |---------------| |---------------| |---------------| |---------------|
+
+Byte 1: Bit7~Bit6 => 00, Normal data packet
+ => 01, Absolute coordinates packet
+ => 10, Notify packet
+ Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
+ When both fingers are up, the last two reports have zero valid
+ bit.
+ Bit4 => finger up/down information. 1: finger down, 0: finger up.
+ Bit3 => 1
+ Bit2 => finger index, 0 is the first finger, 1 is the second finger.
+ Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+ Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+Byte 2: X coordinate (xpos[9:2])
+Byte 3: Y coordinate (ypos[9:2])
+Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
+ Bit3~Bit2 => X coordinate (ypos[1:0])
+ Bit4 => scroll down button
+ Bit5 => scroll up button
+ Bit6 => scroll left button
+ Bit7 => scroll right button
+
+Packet 2 (ABSOLUTE POSITION)
+ Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+ 1 |0|1|V|F|1|1|R|L| 2 |X|X|X|X|X|X|X|X| 3 |Y|Y|Y|Y|Y|Y|Y|Y| 4 |r|l|u|d|X|X|Y|Y|
+ |---------------| |---------------| |---------------| |---------------|
+
+Byte 1: Bit7~Bit6 => 00, Normal data packet
+ => 01, Absolute coordination packet
+ => 10, Notify packet
+ Bit5 => Valid bit, 0 means that the coordinate is invalid or finger up.
+ When both fingers are up, the last two reports have zero valid
+ bit.
+ Bit4 => finger up/down information. 1: finger down, 0: finger up.
+ Bit3 => 1
+ Bit2 => finger index, 0 is the first finger, 1 is the second finger.
+ Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+ Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+Byte 2: X coordinate (xpos[9:2])
+Byte 3: Y coordinate (ypos[9:2])
+Byte 4: Bit1~Bit0 => Y coordinate (xpos[1:0])
+ Bit3~Bit2 => X coordinate (ypos[1:0])
+ Bit4 => scroll down button
+ Bit5 => scroll up button
+ Bit6 => scroll left button
+ Bit7 => scroll right button
+
+Notify Packet for STL3888-B0
+ Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+BYTE |---------------|BYTE |---------------|BYTE|---------------|BYTE|---------------|
+ 1 |1|0|1|P|1|M|R|L| 2 |C|C|C|C|C|C|C|C| 3 |0|0|F|F|0|0|0|i| 4 |r|l|u|d|0|0|0|0|
+ |---------------| |---------------| |---------------| |---------------|
+
+Byte 1: Bit7~Bit6 => 00, Normal data packet
+ => 01, Absolute coordination packet
+ => 10, Notify packet
+ Bit5 => 1
+ Bit4 => when in absolute coordinate mode (valid when EN_PKT_GO is 1):
+ 0: left button is generated by the on-pad command
+ 1: left button is generated by the external button
+ Bit3 => 1
+ Bit2 => Middle Button, 1 is pressed, 0 is not pressed.
+ Bit1 => Right Button, 1 is pressed, 0 is not pressed.
+ Bit0 => Left Button, 1 is pressed, 0 is not pressed.
+Byte 2: Message Type => 0xB7 (Multi Finger, Multi Coordinate mode)
+Byte 3: Bit7~Bit6 => Don't care
+ Bit5~Bit4 => Number of fingers
+ Bit3~Bit1 => Reserved
+ Bit0 => 1: enter gesture mode; 0: leaving gesture mode
+Byte 4: Bit7 => scroll right button
+ Bit6 => scroll left button
+ Bit5 => scroll up button
+ Bit4 => scroll down button
+ * Note that if gesture and additional button(Bit4~Bit7)
+ happen at the same time, the button information will not
+ be sent.
Bit3~Bit0 => Reserved
Sample sequence of Multi-finger, Multi-coordinate mode:
notify packet (valid bit == 1), abs pkt 1, abs pkt 2, abs pkt 1,
- abs pkt 2, ..., notify packet(valid bit == 0)
+ abs pkt 2, ..., notify packet (valid bit == 0)
==============================================================================
* FSP Enable/Disable packet
@@ -250,7 +341,7 @@ Byte 5~8: Don't care (Absolute packet)
FSP supports basic PS/2 commanding set and modes, refer to following URL for
details about PS/2 commands:
-http://www.computer-engineering.org/index.php?title=PS/2_Mouse_Interface
+http://www.computer-engineering.org/ps2mouse/
==============================================================================
* Programming Sequence for Determining Packet Parsing Flow
@@ -409,7 +500,8 @@ offset width default r/w name
0: read only, 1: read/write enable
(Note that following registers does not require clock gating being
enabled prior to write: 05 06 07 08 09 0c 0f 10 11 12 16 17 18 23 2e
- 40 41 42 43.)
+ 40 41 42 43. In addition to that, this bit must be 1 when gesture
+ mode is enabled)
0x31 RW on-pad command detection
bit7 0 RW on-pad command left button down tag
@@ -463,6 +555,10 @@ offset width default r/w name
absolute coordinates; otherwise, host only receives packets with
relative coordinate.)
+ bit7 0 RW EN_PS2_F2: PS/2 gesture mode 2nd
+ finger packet enable
+ 0: disable, 1: enable
+
0x43 RW on-pad control
bit0 0 RW on-pad control enable
0: disable, 1: enable
diff --git a/Documentation/input/xpad.txt b/Documentation/input/xpad.txt
index aae0d404c56..7cc9a436e6a 100644
--- a/Documentation/input/xpad.txt
+++ b/Documentation/input/xpad.txt
@@ -150,7 +150,7 @@ the basic functionality.
1. http://euc.jp/periphs/xbox-controller.ja.html (ITO Takayuki)
2. http://xpad.xbox-scene.com/
-3. http://www.xboxhackz.com/Hackz-Reference.htm
+3. http://www.markosweb.com/www/xboxhackz.com/
4. /proc/bus/usb/devices - dump from InterAct PowerPad Pro (Germany):
diff --git a/Documentation/intel_txt.txt b/Documentation/intel_txt.txt
index f40a1f03001..849de1a78e7 100644
--- a/Documentation/intel_txt.txt
+++ b/Documentation/intel_txt.txt
@@ -25,20 +25,18 @@ which has been updated for the new released platforms.
Intel TXT has been presented at various events over the past few
years, some of which are:
LinuxTAG 2008:
- http://www.linuxtag.org/2008/en/conf/events/vp-donnerstag/
- details.html?talkid=110
+ http://www.linuxtag.org/2008/en/conf/events/vp-donnerstag.html
TRUST2008:
- http://www.trust2008.eu/downloads/Keynote-Speakers/
+ http://www.trust-conference.eu/downloads/Keynote-Speakers/
3_David-Grawrock_The-Front-Door-of-Trusted-Computing.pdf
- IDF 2008, Shanghai:
- http://inteldeveloperforum.com.edgesuite.net/shanghai_2008/
- aep/PROS003/index.html
+ IDF, Shanghai:
+ http://www.prcidf.com.cn/index_en.html
IDFs 2006, 2007 (I'm not sure if/where they are online)
Trusted Boot Project Overview:
=============================
-Trusted Boot (tboot) is an open source, pre- kernel/VMM module that
+Trusted Boot (tboot) is an open source, pre-kernel/VMM module that
uses Intel TXT to perform a measured and verified launch of an OS
kernel/VMM.
@@ -126,7 +124,7 @@ o Tboot then applies an (optional) user-defined launch policy to
o Tboot adjusts the e820 table provided by the bootloader to reserve
its own location in memory as well as to reserve certain other
TXT-related regions.
-o As part of it's launch, tboot DMA protects all of RAM (using the
+o As part of its launch, tboot DMA protects all of RAM (using the
VT-d PMRs). Thus, the kernel must be booted with 'intel_iommu=on'
in order to remove this blanket protection and use VT-d's
page-level protection.
@@ -161,13 +159,15 @@ o In order to put a system into any of the sleep states after a TXT
has been restored, it will restore the TPM PCRs and then
transfer control back to the kernel's S3 resume vector.
In order to preserve system integrity across S3, the kernel
- provides tboot with a set of memory ranges (kernel
- code/data/bss, S3 resume code, and AP trampoline) that tboot
- will calculate a MAC (message authentication code) over and then
- seal with the TPM. On resume and once the measured environment
- has been re-established, tboot will re-calculate the MAC and
- verify it against the sealed value. Tboot's policy determines
- what happens if the verification fails.
+ provides tboot with a set of memory ranges (RAM and RESERVED_KERN
+ in the e820 table, but not any memory that BIOS might alter over
+ the S3 transition) that tboot will calculate a MAC (message
+ authentication code) over and then seal with the TPM. On resume
+ and once the measured environment has been re-established, tboot
+ will re-calculate the MAC and verify it against the sealed value.
+ Tboot's policy determines what happens if the verification fails.
+ Note that the c/s 194 of tboot which has the new MAC code supports
+ this.
That's pretty much it for TXT support.
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index 35cf64d4436..33223ff121d 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -74,11 +74,12 @@ Code Seq#(hex) Include File Comments
0x10 00-0F drivers/char/s390/vmcp.h
0x12 all linux/fs.h
linux/blkpg.h
-0x1b all InfiniBand Subsystem <http://www.openib.org/>
+0x1b all InfiniBand Subsystem <http://infiniband.sourceforge.net/>
0x20 all drivers/cdrom/cm206.h
0x22 all scsi/sg.h
'#' 00-3F IEEE 1394 Subsystem Block for the entire subsystem
'$' 00-0F linux/perf_counter.h, linux/perf_event.h
+'&' 00-07 drivers/firewire/nosy-user.h
'1' 00-1F <linux/timepps.h> PPS kit from Ulrich Windl
<ftp://ftp.de.kernel.org/pub/linux/daemons/ntp/PPS/>
'2' 01-04 linux/i2o.h
@@ -139,7 +140,6 @@ Code Seq#(hex) Include File Comments
'K' all linux/kd.h
'L' 00-1F linux/loop.h conflict!
'L' 10-1F drivers/scsi/mpt2sas/mpt2sas_ctl.h conflict!
-'L' 20-2F linux/usb/vstusb.h
'L' E0-FF linux/ppdd.h encrypted disk device driver
<http://linux01.gwdg.de/~alatham/ppdd.html>
'M' all linux/soundcard.h conflict!
@@ -191,7 +191,7 @@ Code Seq#(hex) Include File Comments
'[' 00-07 linux/usb/tmc.h USB Test and Measurement Devices
<mailto:gregkh@suse.de>
'a' all linux/atm*.h, linux/sonet.h ATM on linux
- <http://lrcwww.epfl.ch/linux-atm/magic.html>
+ <http://lrcwww.epfl.ch/>
'b' 00-FF conflict! bit3 vme host bridge
<mailto:natalia@nikhefk.nikhef.nl>
'b' 00-0F media/bt819.h conflict!
@@ -226,7 +226,7 @@ Code Seq#(hex) Include File Comments
'k' 00-0F linux/spi/spidev.h conflict!
'k' 00-05 video/kyro.h conflict!
'l' 00-3F linux/tcfs_fs.h transparent cryptographic file system
- <http://mikonos.dia.unisa.it/tcfs>
+ <http://web.archive.org/web/*/http://mikonos.dia.unisa.it/tcfs>
'l' 40-7F linux/udf_fs_i.h in development:
<http://sourceforge.net/projects/linux-udf/>
'm' 00-09 linux/mmtimer.h conflict!
@@ -253,7 +253,7 @@ Code Seq#(hex) Include File Comments
<mailto:giometti@linux.it>
'q' 00-1F linux/serio.h
'q' 80-FF linux/telephony.h Internet PhoneJACK, Internet LineJACK
- linux/ixjuser.h <http://www.quicknet.net>
+ linux/ixjuser.h <http://web.archive.org/web/*/http://www.quicknet.net>
'r' 00-1F linux/msdos_fs.h and fs/fat/dir.c
's' all linux/cdk.h
't' 00-7F linux/if_ppp.h
@@ -287,11 +287,12 @@ Code Seq#(hex) Include File Comments
0x89 F0-FF linux/sockios.h SIOCDEVPRIVATE range
0x8B all linux/wireless.h
0x8C 00-3F WiNRADiO driver
- <http://www.proximity.com.au/~brian/winradio/>
+ <http://www.winradio.com.au/>
0x90 00 drivers/cdrom/sbpcd.h
0x92 00-0F drivers/usb/mon/mon_bin.c
0x93 60-7F linux/auto_fs.h
0x94 all fs/btrfs/ioctl.h
+0x97 00-7F fs/ceph/ioctl.h Ceph file system
0x99 00-0F 537-Addinboard driver
<mailto:buk@buks.ipn.de>
0xA0 all linux/sdp/sdp.h Industrial Device Project
diff --git a/Documentation/isdn/INTERFACE.CAPI b/Documentation/isdn/INTERFACE.CAPI
index 5fe8de5cc72..309eb5ed942 100644
--- a/Documentation/isdn/INTERFACE.CAPI
+++ b/Documentation/isdn/INTERFACE.CAPI
@@ -113,12 +113,16 @@ char *driver_name
int (*load_firmware)(struct capi_ctr *ctrlr, capiloaddata *ldata)
(optional) pointer to a callback function for sending firmware and
configuration data to the device
+ The function may return before the operation has completed.
+ Completion must be signalled by a call to capi_ctr_ready().
Return value: 0 on success, error code on error
Called in process context.
void (*reset_ctr)(struct capi_ctr *ctrlr)
- (optional) pointer to a callback function for performing a reset on
- the device, releasing all registered applications
+ (optional) pointer to a callback function for stopping the device,
+ releasing all registered applications
+ The function may return before the operation has completed.
+ Completion must be signalled by a call to capi_ctr_down().
Called in process context.
void (*register_appl)(struct capi_ctr *ctrlr, u16 applid,
@@ -149,10 +153,11 @@ char *(*procinfo)(struct capi_ctr *ctrlr)
pointer to a callback function returning the entry for the device in
the CAPI controller info table, /proc/capi/controller
-read_proc_t *ctr_read_proc
- pointer to the read_proc callback function for the device's proc file
- system entry, /proc/capi/controllers/<n>; will be called with a
- pointer to the device's capi_ctr structure as the last (data) argument
+const struct file_operations *proc_fops
+ pointers to callback functions for the device's proc file
+ system entry, /proc/capi/controllers/<n>; pointer to the device's
+ capi_ctr structure is available from struct proc_dir_entry::data
+ which is available from struct inode.
Note: Callback functions except send_message() are never called in interrupt
context.
diff --git a/Documentation/isdn/README b/Documentation/isdn/README
index 6783437f21c..cfb1884342e 100644
--- a/Documentation/isdn/README
+++ b/Documentation/isdn/README
@@ -36,7 +36,7 @@ README for the ISDN-subsystem
http://www.mhessler.de/i4lfaq/
It can be viewed online, or downloaded in sgml/text/html format.
The FAQ can also be viewed online at
- http://www.isdn4inux.de/faq/
+ http://www.isdn4linux.de/faq/
or downloaded from
ftp://ftp.isdn4linux.de/pub/isdn4linux/FAQ/
diff --git a/Documentation/isdn/README.HiSax b/Documentation/isdn/README.HiSax
index 031c8d81433..99e87a61897 100644
--- a/Documentation/isdn/README.HiSax
+++ b/Documentation/isdn/README.HiSax
@@ -486,7 +486,7 @@ Appendix: Teles PCMCIA driver
-----------------------------
See
- http://www.stud.uni-wuppertal.de/~ea0141/pcmcia.html
+ http://www.linux.no/teles_cs.txt
for instructions.
Appendix: Linux and ISDN-leased lines
diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset
index 794941fc949..ef3343eaa00 100644
--- a/Documentation/isdn/README.gigaset
+++ b/Documentation/isdn/README.gigaset
@@ -47,9 +47,9 @@ GigaSet 307x Device Driver
1.2. Software
--------
- The driver works with ISDN4linux and so can be used with any software
- which is able to use ISDN4linux for ISDN connections (voice or data).
- Experimental Kernel CAPI support is available as a compilation option.
+ The driver works with the Kernel CAPI subsystem as well as the old
+ ISDN4Linux subsystem, so it can be used with any software which is able
+ to use CAPI 2.0 or ISDN4Linux for ISDN connections (voice or data).
There are some user space tools available at
http://sourceforge.net/projects/gigaset307x/
@@ -152,61 +152,42 @@ GigaSet 307x Device Driver
- GIGVER_FWBASE: retrieve the firmware version of the base
Upon return, version[] is filled with the requested version information.
-2.3. ISDN4linux
- ----------
- This is the "normal" mode of operation. After loading the module you can
- set up the ISDN system just as you'd do with any ISDN card supported by
- the ISDN4Linux subsystem. Most distributions provide some configuration
- utility. If not, you can use some HOWTOs like
- http://www.linuxhaven.de/dlhp/HOWTO/DE-ISDN-HOWTO-5.html
- If this doesn't work, because you have some device like SX100 where
- debug output (see section 3.2.) shows something like this when dialing
- CMD Received: ERROR
- Available Params: 0
- Connection State: 0, Response: -1
- gigaset_process_response: resp_code -1 in ConState 0 !
- Timeout occurred
- you probably need to use unimodem mode. (see section 2.5.)
-
-2.4. CAPI
+2.3. CAPI
----
If the driver is compiled with CAPI support (kernel configuration option
- GIGASET_CAPI, experimental) it can also be used with CAPI 2.0 kernel and
- user space applications. For user space access, the module capi.ko must
- be loaded. The capiinit command (included in the capi4k-utils package)
- does this for you.
-
- The CAPI variant of the driver supports legacy ISDN4Linux applications
- via the capidrv compatibility driver. The kernel module capidrv.ko must
- be loaded explicitly with the command
+ GIGASET_CAPI) the devices will show up as CAPI controllers as soon as the
+ corresponding driver module is loaded, and can then be used with CAPI 2.0
+ kernel and user space applications. For user space access, the module
+ capi.ko must be loaded.
+
+ Legacy ISDN4Linux applications are supported via the capidrv
+ compatibility driver. The kernel module capidrv.ko must be loaded
+ explicitly with the command
modprobe capidrv
if needed, and cannot be unloaded again without unloading the driver
first. (These are limitations of capidrv.)
- The note about unimodem mode in the preceding section applies here, too.
-
-2.5. Unimodem mode
- -------------
- This is needed for some devices [e.g. SX100] as they have problems with
- the "normal" commands.
+ Most distributions handle loading and unloading of the various CAPI
+ modules automatically via the command capiinit(1) from the capi4k-utils
+ package or a similar mechanism. Note that capiinit(1) cannot unload the
+ Gigaset drivers because it doesn't support more than one module per
+ driver.
- If you have installed the command line tool gigacontr, you can enter
- unimodem mode using
- gigacontr --mode unimodem
- You can switch back using
- gigacontr --mode isdn
+2.4. ISDN4Linux
+ ----------
+ If the driver is compiled without CAPI support (native ISDN4Linux
+ variant), it registers the device with the legacy ISDN4Linux subsystem
+ after loading the module. It can then be used with ISDN4Linux
+ applications only. Most distributions provide some configuration utility
+ for setting up that subsystem. Otherwise you can use some HOWTOs like
+ http://www.linuxhaven.de/dlhp/HOWTO/DE-ISDN-HOWTO-5.html
- You can also put the driver directly into Unimodem mode when it's loaded,
- by passing the module parameter startmode=0 to the hardware specific
- module, e.g.
- modprobe usb_gigaset startmode=0
- or by adding a line like
- options usb_gigaset startmode=0
- to an appropriate module configuration file, like /etc/modprobe.d/gigaset
- or /etc/modprobe.conf.local.
+2.5. Unimodem mode
+ -------------
In this mode the device works like a modem connected to a serial port
(the /dev/ttyGU0, ... mentioned above) which understands the commands
+
ATZ init, reset
=> OK or ERROR
ATD
@@ -234,6 +215,31 @@ GigaSet 307x Device Driver
to an appropriate module configuration file, like /etc/modprobe.d/gigaset
or /etc/modprobe.conf.local.
+ Unimodem mode is needed for making some devices [e.g. SX100] work which
+ do not support the regular Gigaset command set. If debug output (see
+ section 3.2.) shows something like this when dialing:
+ CMD Received: ERROR
+ Available Params: 0
+ Connection State: 0, Response: -1
+ gigaset_process_response: resp_code -1 in ConState 0 !
+ Timeout occurred
+ then switching to unimodem mode may help.
+
+ If you have installed the command line tool gigacontr, you can enter
+ unimodem mode using
+ gigacontr --mode unimodem
+ You can switch back using
+ gigacontr --mode isdn
+
+ You can also put the driver directly into Unimodem mode when it's loaded,
+ by passing the module parameter startmode=0 to the hardware specific
+ module, e.g.
+ modprobe usb_gigaset startmode=0
+ or by adding a line like
+ options usb_gigaset startmode=0
+ to an appropriate module configuration file, like /etc/modprobe.d/gigaset
+ or /etc/modprobe.conf.local.
+
2.6. Call-ID (CID) mode
------------------
Call-IDs are numbers used to tag commands to, and responses from, the
@@ -263,7 +269,22 @@ GigaSet 307x Device Driver
change its CID mode while the driver is loaded, eg.
echo 0 > /sys/class/tty/ttyGU0/cidmode
-2.7. Unregistered Wireless Devices (M101/M105)
+2.7. Dialing Numbers
+ ---------------
+ The called party number provided by an application for dialing out must
+ be a public network number according to the local dialing plan, without
+ any dial prefix for getting an outside line.
+
+ Internal calls can be made by providing an internal extension number
+ prefixed with "**" (two asterisks) as the called party number. So to dial
+ eg. the first registered DECT handset, give "**11" as the called party
+ number. Dialing "***" (three asterisks) calls all extensions
+ simultaneously (global call).
+
+ This holds for both CAPI 2.0 and ISDN4Linux applications. Unimodem mode
+ does not support internal calls.
+
+2.8. Unregistered Wireless Devices (M101/M105)
-----------------------------------------
The main purpose of the ser_gigaset and usb_gigaset drivers is to allow
the M101 and M105 wireless devices to be used as ISDN devices for ISDN
@@ -292,10 +313,10 @@ GigaSet 307x Device Driver
to /etc/modprobe.d/gigaset, /etc/modprobe.conf.local or a similar file.
Problem:
- Your isdn script aborts with a message about isdnlog.
+ The isdnlog program emits error messages or just doesn't work.
Solution:
- Try deactivating (or commenting out) isdnlog. This driver does not
- support it.
+ Isdnlog supports only the HiSax driver. Do not attempt to use it with
+ other drivers such as Gigaset.
Problem:
You have two or more DECT data adapters (M101/M105) and only the
@@ -321,8 +342,8 @@ GigaSet 307x Device Driver
writing an appropriate value to /sys/module/gigaset/parameters/debug, e.g.
echo 0 > /sys/module/gigaset/parameters/debug
switches off debugging output completely,
- echo 0x10a020 > /sys/module/gigaset/parameters/debug
- enables the standard set of debugging output messages. These values are
+ echo 0x302020 > /sys/module/gigaset/parameters/debug
+ enables a reasonable set of debugging output messages. These values are
bit patterns where every bit controls a certain type of debugging output.
See the constants DEBUG_* in the source file gigaset.h for details.
diff --git a/Documentation/ja_JP/HOWTO b/Documentation/ja_JP/HOWTO
index 55476982b5c..b63301a0381 100644
--- a/Documentation/ja_JP/HOWTO
+++ b/Documentation/ja_JP/HOWTO
@@ -223,7 +223,7 @@ web サイトには、コードの構成、サブシステム、現在存在す
あなたがどこからスタートして良いかわからないが、Linux カーネル開発コミュ
ニティに参加して何かすることをさがしている場合には、Linux kernel
Janitor's プロジェクトにいけば良いでしょう -
- http://janitor.kernelnewbies.org/
+ http://kernelnewbies.org/KernelJanitors
ここはそのようなスタートをするのにうってつけの場所です。ここには、
Linux カーネルソースツリーの中に含まれる、きれいにし、修正しなければな
らない、単純な問題のリストが記述されています。このプロジェクトに関わる
diff --git a/Documentation/ja_JP/SubmittingPatches b/Documentation/ja_JP/SubmittingPatches
index a9dc1243e85..f107c834d24 100644
--- a/Documentation/ja_JP/SubmittingPatches
+++ b/Documentation/ja_JP/SubmittingPatches
@@ -97,7 +97,7 @@ Quilt:
http://savannah.nongnu.org/projects/quilt
Andrew Morton's patch scripts:
-http://www.zip.com.au/~akpm/linux/patches/
+http://userweb.kernel.org/~akpm/stuff/tpp.txt
このリンクの先のスクリプトの代わりとして、quilt がパッチマネジメント
ツールとして推奨されています(上のリンクを見てください)。
@@ -210,7 +210,7 @@ VGER.KERNEL.ORG でホスティングされているメーリングリストの
・移植性のないコードから移植性のあるコードへの置き換え(小さい範囲で
あればアーキテクチャ特有のことでも他の人がコピーできます)
・作者やメンテナによる修正(すなわち patch monkey の再転送モード)
-URL: <http://www.kernel.org/pub/linux/kernel/people/bunk/trivial/>
+EMAIL: <trivial@kernel.org>
7) MIME やリンクや圧縮ファイルや添付ファイルではなくプレインテキストのみ
@@ -534,7 +534,7 @@ gcc においては、マクロと同じくらい軽いです。
----------------------
Andrew Morton, "The perfect patch" (tpp).
- <http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt>
+ <http://userweb.kernel.org/~akpm/stuff/tpp.txt>
Jeff Garzik, "Linux kernel patch submission format".
<http://linux.yyz.us/patch-format.html>
diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt
index 634c625da8c..1e5165aa9e4 100644
--- a/Documentation/kbuild/kbuild.txt
+++ b/Documentation/kbuild/kbuild.txt
@@ -22,11 +22,33 @@ building C files and assembler files.
KAFLAGS
--------------------------------------------------
-Additional options to the assembler.
+Additional options to the assembler (for built-in and modules).
+
+AFLAGS_MODULE
+--------------------------------------------------
+Addtional module specific options to use for $(AS).
+
+AFLAGS_KERNEL
+--------------------------------------------------
+Addtional options for $(AS) when used for assembler
+code for code that is compiled as built-in.
KCFLAGS
--------------------------------------------------
-Additional options to the C compiler.
+Additional options to the C compiler (for built-in and modules).
+
+CFLAGS_KERNEL
+--------------------------------------------------
+Addtional options for $(CC) when used to compile
+code that is compiled as built-in.
+
+CFLAGS_MODULE
+--------------------------------------------------
+Addtional module specific options to use for $(CC).
+
+LDFLAGS_MODULE
+--------------------------------------------------
+Additional options used for $(LD) when linking modules.
KBUILD_VERBOSE
--------------------------------------------------
@@ -40,15 +62,15 @@ Set the directory to look for the kernel source when building external
modules.
The directory can be specified in several ways:
1) Use "M=..." on the command line
-2) Environmnet variable KBUILD_EXTMOD
-3) Environmnet variable SUBDIRS
+2) Environment variable KBUILD_EXTMOD
+3) Environment variable SUBDIRS
The possibilities are listed in the order they take precedence.
Using "M=..." will always override the others.
KBUILD_OUTPUT
--------------------------------------------------
Specify the output directory when building the kernel.
-The output directory can also be specificed using "O=...".
+The output directory can also be specified using "O=...".
Setting "O=..." takes precedence over KBUILD_OUTPUT.
ARCH
@@ -90,7 +112,7 @@ The script will be called with the following arguments:
$3 - kernel map file
$4 - default install path (use root directory if blank)
-The implmentation of "make install" is architecture specific
+The implementation of "make install" is architecture specific
and it may differ from the above.
INSTALLKERNEL is provided to enable the possibility to
diff --git a/Documentation/kbuild/kconfig.txt b/Documentation/kbuild/kconfig.txt
index 49efae70397..cca46b1a0f6 100644
--- a/Documentation/kbuild/kconfig.txt
+++ b/Documentation/kbuild/kconfig.txt
@@ -65,7 +65,7 @@ also use the environment variable KCONFIG_ALLCONFIG as a flag or a
filename that contains config symbols that the user requires to be
set to a specific value. If KCONFIG_ALLCONFIG is used without a
filename, "make *config" checks for a file named
-"all{yes/mod/no/random}.config" (corresponding to the *config command
+"all{yes/mod/no/def/random}.config" (corresponding to the *config command
that was used) for symbol values that are to be forced. If this file
is not found, it checks for a file named "all.config" to contain forced
values.
@@ -96,7 +96,7 @@ Environment variables for 'silentoldconfig'
KCONFIG_NOSILENTUPDATE
--------------------------------------------------
If this variable has a non-blank value, it prevents silent kernel
-config udpates (requires explicit updates).
+config updates (requires explicit updates).
KCONFIG_AUTOCONFIG
--------------------------------------------------
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index 71c602d6168..c787ae51212 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -45,7 +45,6 @@ This document describes the Linux kernel Makefiles.
--- 7.1 header-y
--- 7.2 objhdr-y
--- 7.3 destination-y
- --- 7.4 unifdef-y (deprecated)
=== 8 Kbuild Variables
=== 9 Makefile language
@@ -168,7 +167,7 @@ more details, with real examples.
#drivers/isdn/i4l/Makefile
# Makefile for the kernel ISDN subsystem and device drivers.
# Each configuration option enables a list of files.
- obj-$(CONFIG_ISDN) += isdn.o
+ obj-$(CONFIG_ISDN_I4L) += isdn.o
obj-$(CONFIG_ISDN_PPP_BSDCOMP) += isdn_bsdcomp.o
--- 3.3 Loadable module goals - obj-m
@@ -187,34 +186,35 @@ more details, with real examples.
Note: In this example $(CONFIG_ISDN_PPP_BSDCOMP) evaluates to 'm'
If a kernel module is built from several source files, you specify
- that you want to build a module in the same way as above.
-
- Kbuild needs to know which the parts that you want to build your
- module from, so you have to tell it by setting an
- $(<module_name>-objs) variable.
+ that you want to build a module in the same way as above; however,
+ kbuild needs to know which object files you want to build your
+ module from, so you have to tell it by setting a $(<module_name>-y)
+ variable.
Example:
#drivers/isdn/i4l/Makefile
- obj-$(CONFIG_ISDN) += isdn.o
- isdn-objs := isdn_net_lib.o isdn_v110.o isdn_common.o
+ obj-$(CONFIG_ISDN_I4L) += isdn.o
+ isdn-y := isdn_net_lib.o isdn_v110.o isdn_common.o
In this example, the module name will be isdn.o. Kbuild will
- compile the objects listed in $(isdn-objs) and then run
+ compile the objects listed in $(isdn-y) and then run
"$(LD) -r" on the list of these files to generate isdn.o.
- Kbuild recognises objects used for composite objects by the suffix
- -objs, and the suffix -y. This allows the Makefiles to use
- the value of a CONFIG_ symbol to determine if an object is part
- of a composite object.
+ Due to kbuild recognizing $(<module_name>-y) for composite objects,
+ you can use the value of a CONFIG_ symbol to optionally include an
+ object file as part of a composite object.
Example:
#fs/ext2/Makefile
- obj-$(CONFIG_EXT2_FS) += ext2.o
- ext2-y := balloc.o bitmap.o
- ext2-$(CONFIG_EXT2_FS_XATTR) += xattr.o
+ obj-$(CONFIG_EXT2_FS) += ext2.o
+ ext2-y := balloc.o dir.o file.o ialloc.o inode.o ioctl.o \
+ namei.o super.o symlink.o
+ ext2-$(CONFIG_EXT2_FS_XATTR) += xattr.o xattr_user.o \
+ xattr_trusted.o
- In this example, xattr.o is only part of the composite object
- ext2.o if $(CONFIG_EXT2_FS_XATTR) evaluates to 'y'.
+ In this example, xattr.o, xattr_user.o and xattr_trusted.o are only
+ part of the composite object ext2.o if $(CONFIG_EXT2_FS_XATTR)
+ evaluates to 'y'.
Note: Of course, when you are building objects into the kernel,
the syntax above will also work. So, if you have CONFIG_EXT2_FS=y,
@@ -244,12 +244,12 @@ more details, with real examples.
may contain both a built-in.o and a lib.a file.
Example:
- #arch/i386/lib/Makefile
- lib-y := checksum.o delay.o
+ #arch/x86/lib/Makefile
+ lib-y := delay.o
- This will create a library lib.a based on checksum.o and delay.o.
- For kbuild to actually recognize that there is a lib.a being built,
- the directory shall be listed in libs-y.
+ This will create a library lib.a based on delay.o. For kbuild to
+ actually recognize that there is a lib.a being built, the directory
+ shall be listed in libs-y.
See also "6.3 List directories to visit when descending".
Use of lib-y is normally restricted to lib/ and arch/*/lib.
@@ -284,43 +284,40 @@ more details, with real examples.
--- 3.7 Compilation flags
ccflags-y, asflags-y and ldflags-y
- The three flags listed above applies only to the kbuild makefile
- where they are assigned. They are used for all the normal
- cc, as and ld invocation happenign during a recursive build.
+ These three flags apply only to the kbuild makefile in which they
+ are assigned. They are used for all the normal cc, as and ld
+ invocations happening during a recursive build.
Note: Flags with the same behaviour were previously named:
EXTRA_CFLAGS, EXTRA_AFLAGS and EXTRA_LDFLAGS.
- They are yet supported but their use are deprecated.
+ They are still supported but their usage is deprecated.
- ccflags-y specifies options for compiling C files with $(CC).
+ ccflags-y specifies options for compiling with $(CC).
Example:
- # drivers/sound/emu10k1/Makefile
- ccflags-y += -I$(obj)
- ccflags-$(DEBUG) += -DEMU10K1_DEBUG
-
+ # drivers/acpi/Makefile
+ ccflags-y := -Os
+ ccflags-$(CONFIG_ACPI_DEBUG) += -DACPI_DEBUG_OUTPUT
This variable is necessary because the top Makefile owns the
variable $(KBUILD_CFLAGS) and uses it for compilation flags for the
entire tree.
- asflags-y is a similar string for per-directory options
- when compiling assembly language source.
+ asflags-y specifies options for assembling with $(AS).
Example:
- #arch/x86_64/kernel/Makefile
- asflags-y := -traditional
+ #arch/sparc/kernel/Makefile
+ asflags-y := -ansi
-
- ldflags-y is a string for per-directory options to $(LD).
+ ldflags-y specifies options for linking with $(LD).
Example:
- #arch/m68k/fpsp040/Makefile
- ldflags-y := -x
+ #arch/cris/boot/compressed/Makefile
+ ldflags-y += -T $(srctree)/$(src)/decompress_$(arch-y).lds
subdir-ccflags-y, subdir-asflags-y
- The two flags listed above are similar to ccflags-y and as-falgs-y.
- The difference is that the subdir- variants has effect for the kbuild
- file where tey are present and all subdirectories.
+ The two flags listed above are similar to ccflags-y and asflags-y.
+ The difference is that the subdir- variants have effect for the kbuild
+ file where they are present and all subdirectories.
Options specified using subdir-* are added to the commandline before
the options specified using the non-subdir variants.
@@ -340,18 +337,18 @@ more details, with real examples.
CFLAGS_aha152x.o = -DAHA152X_STAT -DAUTOCONF
CFLAGS_gdth.o = # -DDEBUG_GDTH=2 -D__SERIAL__ -D__COM2__ \
-DGDTH_STATISTICS
- CFLAGS_seagate.o = -DARBITRATE -DPARITY -DSEAGATE_USE_ASM
- These three lines specify compilation flags for aha152x.o,
- gdth.o, and seagate.o
+ These two lines specify compilation flags for aha152x.o and gdth.o.
$(AFLAGS_$@) is a similar feature for source files in assembly
languages.
Example:
# arch/arm/kernel/Makefile
- AFLAGS_head-armv.o := -DTEXTADDR=$(TEXTADDR) -traditional
- AFLAGS_head-armo.o := -DTEXTADDR=$(TEXTADDR) -traditional
+ AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
+ AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312
+ AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
+
--- 3.9 Dependency tracking
@@ -923,16 +920,33 @@ When kbuild executes, the following steps are followed (roughly):
The first example utilises the trick that a config option expands
to 'y' when selected.
- CFLAGS_KERNEL $(CC) options specific for built-in
+ KBUILD_AFLAGS_KERNEL $(AS) options specific for built-in
- $(CFLAGS_KERNEL) contains extra C compiler flags used to compile
+ $(KBUILD_AFLAGS_KERNEL) contains extra C compiler flags used to compile
resident kernel code.
- CFLAGS_MODULE $(CC) options specific for modules
+ KBUILD_AFLAGS_MODULE Options for $(AS) when building modules
- $(CFLAGS_MODULE) contains extra C compiler flags used to compile code
- for loadable kernel modules.
+ $(KBUILD_AFLAGS_MODULE) is used to add arch specific options that
+ are used for $(AS).
+ From commandline AFLAGS_MODULE shall be used (see kbuild.txt).
+
+ KBUILD_CFLAGS_KERNEL $(CC) options specific for built-in
+
+ $(KBUILD_CFLAGS_KERNEL) contains extra C compiler flags used to compile
+ resident kernel code.
+ KBUILD_CFLAGS_MODULE Options for $(CC) when building modules
+
+ $(KBUILD_CFLAGS_MODULE) is used to add arch specific options that
+ are used for $(CC).
+ From commandline CFLAGS_MODULE shall be used (see kbuild.txt).
+
+ KBUILD_LDFLAGS_MODULE Options for $(LD) when linking modules
+
+ $(KBUILD_LDFLAGS_MODULE) is used to add arch specific options
+ used when linking modules. This is often a linker script.
+ From commandline LDFLAGS_MODULE shall be used (see kbuild.txt).
--- 6.2 Add prerequisites to archprepare:
@@ -1176,14 +1190,14 @@ When kbuild executes, the following steps are followed (roughly):
=== 7 Kbuild syntax for exported headers
The kernel include a set of headers that is exported to userspace.
-Many headers can be exported as-is but other headers requires a
+Many headers can be exported as-is but other headers require a
minimal pre-processing before they are ready for user-space.
The pre-processing does:
- drop kernel specific annotations
- drop include of compiler.h
-- drop all sections that is kernel internat (guarded by ifdef __KERNEL__)
+- drop all sections that are kernel internal (guarded by ifdef __KERNEL__)
-Each relevant directory contain a file name "Kbuild" which specify the
+Each relevant directory contains a file name "Kbuild" which specifies the
headers to be exported.
See subsequent chapter for the syntax of the Kbuild file.
@@ -1230,11 +1244,6 @@ See subsequent chapter for the syntax of the Kbuild file.
will be located in the directory "include/linux" when exported.
- --- 7.4 unifdef-y (deprecated)
-
- unifdef-y is deprecated. A direct replacement is header-y.
-
-
=== 8 Kbuild Variables
The top Makefile exports the following variables:
diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt
index 27a52b35d55..3d8a97747f7 100644
--- a/Documentation/kernel-doc-nano-HOWTO.txt
+++ b/Documentation/kernel-doc-nano-HOWTO.txt
@@ -345,5 +345,10 @@ documentation, in <filename>, for the functions listed.
section titled <section title> from <filename>.
Spaces are allowed in <section title>; do not quote the <section title>.
+!C<filename> is replaced by nothing, but makes the tools check that
+all DOC: sections and documented functions, symbols, etc. are used.
+This makes sense to use when you use !F/!P only and want to verify
+that all documentation is included.
+
Tim.
*/ <twaugh@redhat.com>
diff --git a/Documentation/kernel-docs.txt b/Documentation/kernel-docs.txt
index 28cdc2af213..715eaaf1519 100644
--- a/Documentation/kernel-docs.txt
+++ b/Documentation/kernel-docs.txt
@@ -75,7 +75,7 @@
* Title: "Conceptual Architecture of the Linux Kernel"
Author: Ivan T. Bowman.
- URL: http://plg.uwaterloo.ca/~itbowman/papers/CS746G-a1.html
+ URL: http://plg.uwaterloo.ca/
Keywords: conceptual software architecture, extracted design,
reverse engineering, system structure.
Description: Conceptual software architecture of the Linux kernel,
@@ -84,7 +84,7 @@
* Title: "Concrete Architecture of the Linux Kernel"
Author: Ivan T. Bowman, Saheem Siddiqi, and Meyer C. Tanuan.
- URL: http://plg.uwaterloo.ca/~itbowman/papers/CS746G-a2.html
+ URL: http://plg.uwaterloo.ca/
Keywords: concrete architecture, extracted design, reverse
engineering, system structure, dependencies.
Description: Concrete architecture of the Linux kernel,
@@ -95,7 +95,7 @@
* Title: "Linux as a Case Study: Its Extracted Software
Architecture"
Author: Ivan T. Bowman, Richard C. Holt and Neil V. Brewster.
- URL: http://plg.uwaterloo.ca/~itbowman/papers/linuxcase.html
+ URL: http://plg.uwaterloo.ca/
Keywords: software architecture, architecture recovery,
redocumentation.
Description: Paper appeared at ICSE'99, Los Angeles, May 16-22,
@@ -104,7 +104,7 @@
* Title: "Overview of the Virtual File System"
Author: Richard Gooch.
- URL: http://www.atnf.csiro.au/~rgooch/linux/vfs.txt
+ URL: http://www.mjmwired.net/kernel/Documentation/filesystems/vfs.txt
Keywords: VFS, File System, mounting filesystems, opening files,
dentries, dcache.
Description: Brief introduction to the Linux Virtual File System.
@@ -116,7 +116,7 @@
Author: Ingo Molnar, Gadi Oxman and Miguel de Icaza.
URL: http://www.linuxjournal.com/article.php?sid=2391
Keywords: RAID, MD driver.
- Description: Linux Journal Kernel Korner article. Here is it's
+ Description: Linux Journal Kernel Korner article. Here is its
abstract: "A description of the implementation of the RAID-1,
RAID-4 and RAID-5 personalities of the MD device driver in the
Linux kernel, providing users with high performance and reliable,
@@ -127,7 +127,7 @@
URL: http://www.linuxjournal.com/article.php?sid=1219
Keywords: device driver, module, loading/unloading modules,
allocating resources.
- Description: Linux Journal Kernel Korner article. Here is it's
+ Description: Linux Journal Kernel Korner article. Here is its
abstract: "This is the first of a series of four articles
co-authored by Alessandro Rubini and Georg Zezchwitz which present
a practical approach to writing Linux device drivers as kernel
@@ -141,7 +141,7 @@
Keywords: character driver, init_module, clean_up module,
autodetection, mayor number, minor number, file operations,
open(), close().
- Description: Linux Journal Kernel Korner article. Here is it's
+ Description: Linux Journal Kernel Korner article. Here is its
abstract: "This article, the second of four, introduces part of
the actual code to create custom module implementing a character
device driver. It describes the code for module initialization and
@@ -152,7 +152,7 @@
URL: http://www.linuxjournal.com/article.php?sid=1221
Keywords: read(), write(), select(), ioctl(), blocking/non
blocking mode, interrupt handler.
- Description: Linux Journal Kernel Korner article. Here is it's
+ Description: Linux Journal Kernel Korner article. Here is its
abstract: "This article, the third of four on writing character
device drivers, introduces concepts of reading, writing, and using
ioctl-calls".
@@ -161,7 +161,7 @@
Author: Alessandro Rubini and Georg v. Zezschwitz.
URL: http://www.linuxjournal.com/article.php?sid=1222
Keywords: interrupts, irqs, DMA, bottom halves, task queues.
- Description: Linux Journal Kernel Korner article. Here is it's
+ Description: Linux Journal Kernel Korner article. Here is its
abstract: "This is the fourth in a series of articles about
writing character device drivers as loadable kernel modules. This
month, we further investigate the field of interrupt handling.
@@ -267,15 +267,13 @@
* Title: "Kernel API changes from 2.0 to 2.2"
Author: Richard Gooch.
URL:
- http://www.atnf.csiro.au/~rgooch/linux/docs/porting-to-2.2.html
+ http://www.linuxhq.com/guides/LKMPG/node28.html
Keywords: 2.2, changes.
Description: Kernel functions/structures/variables which changed
from 2.0.x to 2.2.x.
* Title: "Kernel API changes from 2.2 to 2.4"
Author: Richard Gooch.
- URL:
- http://www.atnf.csiro.au/~rgooch/linux/docs/porting-to-2.4.html
Keywords: 2.4, changes.
Description: Kernel functions/structures/variables which changed
from 2.2.x to 2.4.x.
@@ -290,7 +288,6 @@
* Title: "I/O Event Handling Under Linux"
Author: Richard Gooch.
- URL: http://www.atnf.csiro.au/~rgooch/linux/docs/io-events.html
Keywords: IO, I/O, select(2), poll(2), FDs, aio_read(2), readiness
event queues.
Description: From the Introduction: "I/O Event handling is about
@@ -386,64 +383,64 @@
* Title: "Porting Device Drivers To Linux 2.2: part II"
Author: Alan Cox.
- URL: http://www.linux-mag.com/1999-06/gear_01.html
+ URL: http://www.linux-mag.com/id/238
Keywords: ports, porting.
Description: Second part on porting from 2.0 to 2.2 kernels.
* Title: "How To Make Sure Your Driver Will Work On The Power
Macintosh"
Author: Paul Mackerras.
- URL: http://www.linux-mag.com/1999-07/gear_01.html
+ URL: http://www.linux-mag.com/id/261
Keywords: Mac, Power Macintosh, porting, drivers, compatibility.
Description: The title says it all.
* Title: "An Introduction to SCSI Drivers"
Author: Alan Cox.
- URL: http://www.linux-mag.com/1999-08/gear_01.html
+ URL: http://www.linux-mag.com/id/284
Keywords: SCSI, device, driver.
Description: The title says it all.
* Title: "Advanced SCSI Drivers And Other Tales"
Author: Alan Cox.
- URL: http://www.linux-mag.com/1999-09/gear_01.html
+ URL: http://www.linux-mag.com/id/307
Keywords: SCSI, device, driver, advanced.
Description: The title says it all.
* Title: "Writing Linux Mouse Drivers"
Author: Alan Cox.
- URL: http://www.linux-mag.com/1999-10/gear_01.html
+ URL: http://www.linux-mag.com/id/330
Keywords: mouse, driver, gpm.
Description: The title says it all.
* Title: "More on Mouse Drivers"
Author: Alan Cox.
- URL: http://www.linux-mag.com/1999-11/gear_01.html
+ URL: http://www.linux-mag.com/id/356
Keywords: mouse, driver, gpm, races, asynchronous I/O.
Description: The title still says it all.
* Title: "Writing Video4linux Radio Driver"
Author: Alan Cox.
- URL: http://www.linux-mag.com/1999-12/gear_01.html
+ URL: http://www.linux-mag.com/id/381
Keywords: video4linux, driver, radio, radio devices.
Description: The title says it all.
* Title: "Video4linux Drivers, Part 1: Video-Capture Device"
Author: Alan Cox.
- URL: http://www.linux-mag.com/2000-01/gear_01.html
+ URL: http://www.linux-mag.com/id/406
Keywords: video4linux, driver, video capture, capture devices,
camera driver.
Description: The title says it all.
* Title: "Video4linux Drivers, Part 2: Video-capture Devices"
Author: Alan Cox.
- URL: http://www.linux-mag.com/2000-02/gear_01.html
+ URL: http://www.linux-mag.com/id/429
Keywords: video4linux, driver, video capture, capture devices,
camera driver, control, query capabilities, capability, facility.
Description: The title says it all.
* Title: "PCI Management in Linux 2.2"
Author: Alan Cox.
- URL: http://www.linux-mag.com/2000-03/gear_01.html
+ URL: http://www.linux-mag.com/id/452
Keywords: PCI, bus, bus-mastering.
Description: The title says it all.
@@ -502,7 +499,7 @@
* Title: "A Linux vm README"
Author: Kanoj Sarcar.
- URL: http://reality.sgi.com/kanoj_engr/vm229.html
+ URL: http://kos.enix.org/pub/linux-vmm.html
Keywords: virtual memory, mm, pgd, vma, page, page flags, page
cache, swap cache, kswapd.
Description: Telegraphic, short descriptions and definitions
@@ -659,7 +656,7 @@
* Name: "Linux Kernel Source Reference"
Author: Thomas Graichen.
- URL: http://innominate.org/~graichen/projects/lksr/
+ URL: http://marc.info/?l=linux-kernel&m=96446640102205&w=4
Keywords: CVS, web, cvsweb, browsing source code.
Description: Web interface to a CVS server with the kernel
sources. "Here you can have a look at any file of the Linux kernel
@@ -682,7 +679,7 @@
produced during the week. Published every Thursday.
* Name: "Kernel Traffic"
- URL: http://kt.zork.net/kernel-traffic/
+ URL: http://kt.earth.li/kernel-traffic/index.html
Keywords: linux-kernel mailing list, weekly kernel news.
Description: Weekly newsletter covering the most relevant
discussions of the linux-kernel mailing list.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 736d4560288..8dd7248508a 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -54,9 +54,11 @@ parameter is applicable:
IMA Integrity measurement architecture is enabled.
IOSCHED More than one I/O scheduler is enabled.
IP_PNP IP DHCP, BOOTP, or RARP is enabled.
+ IPV6 IPv6 support is enabled.
ISAPNP ISA PnP code is enabled.
ISDN Appropriate ISDN support is enabled.
JOY Appropriate joystick support is enabled.
+ KGDB Kernel debugger support is enabled.
KVM Kernel Virtual Machine support is enabled.
LIBATA Libata driver is enabled
LP Printer support is enabled.
@@ -71,7 +73,6 @@ parameter is applicable:
MTD MTD (Memory Technology Device) support is enabled.
NET Appropriate network support is enabled.
NUMA NUMA support is enabled.
- GENERIC_TIME The generic timeofday code is enabled.
NFS Appropriate NFS support is enabled.
OSS OSS sound support is enabled.
PV_OPS A paravirtualized kernel is enabled.
@@ -87,10 +88,11 @@ parameter is applicable:
RAM RAM disk support is enabled.
S390 S390 architecture is enabled.
SCSI Appropriate SCSI support is enabled.
- A lot of drivers has their options described inside of
- Documentation/scsi/.
+ A lot of drivers have their options described inside
+ the Documentation/scsi/ sub-directory.
SECURITY Different security models are enabled.
SELINUX SELinux support is enabled.
+ APPARMOR AppArmor support is enabled.
SERIAL Serial support is enabled.
SH SuperH architecture is enabled.
SMP The kernel is an SMP kernel.
@@ -98,6 +100,7 @@ parameter is applicable:
SWSUSP Software suspend (hibernation) is enabled.
SUSPEND System suspend states are enabled.
FTRACE Function tracing enabled.
+ TPM TPM drivers are enabled.
TS Appropriate touchscreen support is enabled.
UMS USB Mass Storage support is enabled.
USB USB support is enabled.
@@ -112,6 +115,7 @@ parameter is applicable:
More X86-64 boot options can be found in
Documentation/x86/x86_64/boot-options.txt .
X86 Either 32bit or 64bit x86 (same as X86-32+X86-64)
+ XEN Xen support is enabled
In addition, the following text indicates that the option:
@@ -142,14 +146,14 @@ and is between 256 and 4096 characters. It is defined in the file
acpi= [HW,ACPI,X86]
Advanced Configuration and Power Interface
- Format: { force | off | ht | strict | noirq | rsdt }
+ Format: { force | off | strict | noirq | rsdt }
force -- enable ACPI if default was off
off -- disable ACPI if default was on
noirq -- do not use ACPI for IRQ routing
- ht -- run only enough ACPI to enable Hyper Threading
strict -- Be less tolerant of platforms that are not
strictly ACPI specification compliant.
rsdt -- prefer RSDT over (default) XSDT
+ copy_dsdt -- copy DSDT to memory
See also Documentation/power/pm.txt, pci=noacpi
@@ -251,8 +255,8 @@ and is between 256 and 4096 characters. It is defined in the file
control method, with respect to putting devices into
low power states, to be enforced (the ACPI 2.0 ordering
of _PTS is used by default).
- s4_nonvs prevents the kernel from saving/restoring the
- ACPI NVS memory during hibernation.
+ nonvs prevents the kernel from saving/restoring the
+ ACPI NVS memory during suspend/hibernation and resume.
sci_force_enable causes the kernel to set SCI_EN directly
on resume from S1/S3 (which is against the ACPI spec,
but some broken systems don't work without it).
@@ -277,52 +281,32 @@ and is between 256 and 4096 characters. It is defined in the file
no: ACPI OperationRegions are not marked as reserved,
no further checks are performed.
- ad1848= [HW,OSS]
- Format: <io>,<irq>,<dma>,<dma2>,<type>
-
add_efi_memmap [EFI; X86] Include EFI memory map in
kernel's map of available physical RAM.
- advansys= [HW,SCSI]
- See header of drivers/scsi/advansys.c.
-
- advwdt= [HW,WDT] Advantech WDT
- Format: <iostart>,<iostop>
-
- aedsp16= [HW,OSS] Audio Excel DSP 16
- Format: <io>,<irq>,<dma>,<mss_io>,<mpu_io>,<mpu_irq>
- See also header of sound/oss/aedsp16.c.
-
agp= [AGP]
{ off | try_unsupported }
off: disable AGP support
try_unsupported: try to drive unsupported chipsets
(may crash computer or cause data corruption)
- aha152x= [HW,SCSI]
- See Documentation/scsi/aha152x.txt.
-
- aha1542= [HW,SCSI]
- Format: <portbase>[,<buson>,<busoff>[,<dmaspeed>]]
+ ALSA [HW,ALSA]
+ See Documentation/sound/alsa/alsa-parameters.txt
- aic7xxx= [HW,SCSI]
- See Documentation/scsi/aic7xxx.txt.
-
- aic79xx= [HW,SCSI]
- See Documentation/scsi/aic79xx.txt.
+ alignment= [KNL,ARM]
+ Allow the default userspace alignment fault handler
+ behaviour to be specified. Bit 0 enables warnings,
+ bit 1 enables fixups, and bit 2 sends a segfault.
amd_iommu= [HW,X86-84]
Pass parameters to the AMD IOMMU driver in the system.
Possible values are:
- isolate - enable device isolation (each device, as far
- as possible, will get its own protection
- domain) [default]
- share - put every device behind one IOMMU into the
- same protection domain
fullflush - enable flushing of IO/TLB entries when
they are unmapped. Otherwise they are
flushed before they will be reused, which
is a lot of faster
+ off - do not initialize any AMD IOMMU found in
+ the system
amijoy.map= [HW,JOY] Amiga joystick support
Map of devices attached to JOY0DAT and JOY1DAT
@@ -347,6 +331,9 @@ and is between 256 and 4096 characters. It is defined in the file
Change the amount of debugging information output
when initialising the APIC and IO-APIC components.
+ autoconf= [IPV6]
+ See Documentation/networking/ipv6.txt.
+
show_lapic= [APIC,X86] Advanced Programmable Interrupt Controller
Limit apic dumping. The parameter defines the maximal
number of local apics being dumped. Also it is possible
@@ -366,8 +353,6 @@ and is between 256 and 4096 characters. It is defined in the file
atarimouse= [HW,MOUSE] Atari Mouse
- atascsi= [HW,SCSI] Atari SCSI
-
atkbd.extra= [HW] Enable extra LEDs and keys on IBM RapidAccess,
EzKey and similar keyboards
@@ -417,10 +402,6 @@ and is between 256 and 4096 characters. It is defined in the file
bttv.pll= See Documentation/video4linux/bttv/Insmod-options
bttv.tuner= and Documentation/video4linux/bttv/CARDLIST
- BusLogic= [HW,SCSI]
- See drivers/scsi/BusLogic.c, comment before function
- BusLogic_ParseDriverOptions().
-
c101= [NET] Moxa C101 synchronous serial card
cachesize= [BUGS=X86-32] Override level 2 CPU cache size detection.
@@ -463,7 +444,7 @@ and is between 256 and 4096 characters. It is defined in the file
clocksource is not available, it defaults to PIT.
Format: { pit | tsc | cyclone | pmtmr }
- clocksource= [GENERIC_TIME] Override the default clocksource
+ clocksource= Override the default clocksource
Format: <string>
Override the default clocksource and use the clocksource
with the name specified.
@@ -629,6 +610,12 @@ and is between 256 and 4096 characters. It is defined in the file
See drivers/char/README.epca and
Documentation/serial/digiepca.txt.
+ disable= [IPV6]
+ See Documentation/networking/ipv6.txt.
+
+ disable_ipv6= [IPV6]
+ See Documentation/networking/ipv6.txt.
+
disable_mtrr_cleanup [X86]
The kernel tries to adjust MTRR layout from continuous
to discrete, to make X server driver able to add WB
@@ -644,8 +631,6 @@ and is between 256 and 4096 characters. It is defined in the file
Disable PIN 1 of APIC timer
Can be useful to work around chipset bugs.
- dmasound= [HW,OSS] Sound subsystem buffers
-
dma_debug=off If the kernel is compiled with DMA_API_DEBUG support,
this option disables the debugging code at boot.
@@ -665,8 +650,6 @@ and is between 256 and 4096 characters. It is defined in the file
dscc4.setup= [NET]
- dtc3181e= [HW,SCSI]
-
dynamic_printk Enables pr_debug()/dev_dbg() calls if
CONFIG_DYNAMIC_PRINTK_DEBUG has been enabled.
These can also be switched on/off via
@@ -675,8 +658,11 @@ and is between 256 and 4096 characters. It is defined in the file
earlycon= [KNL] Output early console device and options.
uart[8250],io,<addr>[,options]
uart[8250],mmio,<addr>[,options]
+ uart[8250],mmio32,<addr>[,options]
Start an early, polled-mode console on the 8250/16550
UART at the specified I/O port or MMIO address.
+ MMIO inter-register address stride is either 8bit (mmio)
+ or 32bit (mmio32).
The options are the same as for ttyS, above.
earlyprintk= [X86,SH,BLACKFIN]
@@ -698,7 +684,11 @@ and is between 256 and 4096 characters. It is defined in the file
The VGA output is eventually overwritten by the real
console.
- eata= [HW,SCSI]
+ ekgdboc= [X86,KGDB] Allow early kernel console debugging
+ ekgdboc=kbd
+
+ This is desgined to be used in conjunction with
+ the boot argument: earlyprintk=vga
edd= [EDD]
Format: {"off" | "on" | "skip[mbr]"}
@@ -740,13 +730,14 @@ and is between 256 and 4096 characters. It is defined in the file
Default value is 0.
Value can be changed at runtime via /selinux/enforce.
+ erst_disable [ACPI]
+ Disable Error Record Serialization Table (ERST)
+ support.
+
ether= [HW,NET] Ethernet cards parameters
This option is obsoleted by the "netdev=" option, which
has equivalent usage. See its documentation for details.
- eurwdt= [HW,WDT] Eurotech CPU-1220/1410 onboard watchdog.
- Format: <io>[,<irq>]
-
failslab=
fail_page_alloc=
fail_make_request=[KNL]
@@ -754,12 +745,6 @@ and is between 256 and 4096 characters. It is defined in the file
Format: <interval>,<probability>,<space>,<times>
See also /Documentation/fault-injection/.
- fd_mcs= [HW,SCSI]
- See header of drivers/scsi/fd_mcs.c.
-
- fdomain= [HW,SCSI]
- See header of drivers/scsi/fdomain.c.
-
floppy= [HW]
See Documentation/blockdev/floppy.txt.
@@ -774,8 +759,12 @@ and is between 256 and 4096 characters. It is defined in the file
as early as possible in order to facilitate early
boot debugging.
- ftrace_dump_on_oops
+ ftrace_dump_on_oops[=orig_cpu]
[FTRACE] will dump the trace buffers on oops.
+ If no parameter is passed, ftrace will dump
+ buffers of all CPUs, but if you pass orig_cpu, it will
+ dump only the buffer of the CPU that triggered the
+ oops.
ftrace_filter=[function-list]
[FTRACE] Limit the functions traced by the function
@@ -815,14 +804,9 @@ and is between 256 and 4096 characters. It is defined in the file
When zero, profiling data is discarded and associated
debugfs files are removed at module unload time.
- gdth= [HW,SCSI]
- See header of drivers/scsi/gdth.c.
-
gpt [EFI] Forces disk with valid GPT signature but
invalid Protective MBR to be treated as GPT.
- gvp11= [HW,SCSI]
-
hashdist= [KNL,NUMA] Large hashes allocated during boot
are distributed across NUMA nodes. Defaults on
for 64bit NUMA, off otherwise.
@@ -833,6 +817,11 @@ and is between 256 and 4096 characters. It is defined in the file
hd= [EIDE] (E)IDE hard drive subsystem geometry
Format: <cyl>,<head>,<sect>
+ hest_disable [ACPI]
+ Disable Hardware Error Source Table (HEST) support;
+ corresponding firmware-first mode error processing
+ logic will be disabled.
+
highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact
size of <nn>. This works even on boxes that have no
highmem otherwise. This also works to reduce highmem
@@ -890,9 +879,6 @@ and is between 256 and 4096 characters. It is defined in the file
controller
i8042.nopnp [HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
controllers
- i8042.panicblink=
- [HW] Frequency with which keyboard LEDs should blink
- when kernel panics (default is 0.5 sec)
i8042.reset [HW] Reset the controller during init and cleanup
i8042.unlock [HW] Unlock (ignore) the keylock
@@ -909,9 +895,6 @@ and is between 256 and 4096 characters. It is defined in the file
i8k.restricted [HW] Allow controlling fans only if SYS_ADMIN
capability is set.
- ibmmcascsi= [HW,MCA,SCSI] IBM MicroChannel SCSI adapter
- See Documentation/mca.txt.
-
icn= [HW,ISDN]
Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
@@ -961,9 +944,6 @@ and is between 256 and 4096 characters. It is defined in the file
programs exec'd, files mmap'd for exec, and all files
opened for read by uid=0.
- in2000= [HW,SCSI]
- See header of drivers/scsi/in2000.c.
-
init= [KNL]
Format: <full_path>
Run specified binary instead of /sbin/init as init
@@ -1001,6 +981,12 @@ and is between 256 and 4096 characters. It is defined in the file
result in a hardware IOTLB flush operation as opposed
to batching them for performance.
+ intremap= [X86-64, Intel-IOMMU]
+ Format: { on (default) | off | nosid }
+ on enable Interrupt Remapping (default)
+ off disable Interrupt Remapping
+ nosid disable Source ID checking
+
inttest= [IA64]
iomem= Disable strict checking of access to MMIO memory
@@ -1041,9 +1027,6 @@ and is between 256 and 4096 characters. It is defined in the file
See comment before ip2_setup() in
drivers/char/ip2/ip2base.c.
- ips= [HW,SCSI] Adaptec / IBM ServeRAID controller
- See header of drivers/scsi/ips.c.
-
irqfixup [HW]
When an interrupt is not handled search all handlers
for it. Intended to get systems with badly broken
@@ -1102,10 +1085,29 @@ and is between 256 and 4096 characters. It is defined in the file
use the HighMem zone if it exists, and the Normal
zone if it does not.
- kgdboc= [HW] kgdb over consoles.
- Requires a tty driver that supports console polling.
- (only serial supported for now)
- Format: <serial_device>[,baud]
+ kgdbdbgp= [KGDB,HW] kgdb over EHCI usb debug port.
+ Format: <Controller#>[,poll interval]
+ The controller # is the number of the ehci usb debug
+ port as it is probed via PCI. The poll interval is
+ optional and is the number seconds in between
+ each poll cycle to the debug port in case you need
+ the functionality for interrupting the kernel with
+ gdb or control-c on the dbgp connection. When
+ not using this parameter you use sysrq-g to break into
+ the kernel debugger.
+
+ kgdboc= [KGDB,HW] kgdb over consoles.
+ Requires a tty driver that supports console polling,
+ or a supported polling keyboard driver (non-usb).
+ Serial only format: <serial_device>[,baud]
+ keyboard only format: kbd
+ keyboard and serial format: kbd,<serial_device>[,baud]
+ Optional Kernel mode setting:
+ kms, kbd format: kms,kbd
+ kms, kbd and serial format: kms,kbd,<ser_dev>[,baud]
+
+ kgdbwait [KGDB] Stop kernel execution and enter the
+ kernel debugger at the earliest opportunity.
kmac= [MIPS] korina ethernet MAC address.
Configure the RouterBoard 532 series on-chip
@@ -1184,7 +1186,7 @@ and is between 256 and 4096 characters. It is defined in the file
libata.force= [LIBATA] Force configurations. The format is comma
separated list of "[ID:]VAL" where ID is
- PORT[:DEVICE]. PORT and DEVICE are decimal numbers
+ PORT[.DEVICE]. PORT and DEVICE are decimal numbers
matching port, link or device. Basically, it matches
the ATA ID string printed on console by libata. If
the whole ID part is omitted, the last PORT and DEVICE
@@ -1217,10 +1219,12 @@ and is between 256 and 4096 characters. It is defined in the file
* nohrst, nosrst, norst: suppress hard, soft
and both resets.
+ * dump_id: dump IDENTIFY data.
+
If there are multiple matching configurations changing
the same attribute, the last one is used.
- lmb=debug [KNL] Enable lmb debug messages.
+ memblock=debug [KNL] Enable memblock debug messages.
load_ramdisk= [RAM] List of ramdisks to load from floppy
See Documentation/blockdev/ramdisk.txt.
@@ -1298,9 +1302,6 @@ and is between 256 and 4096 characters. It is defined in the file
ltpc= [NET]
Format: <io>,<irq>,<dma>
- mac5380= [HW,SCSI] Format:
- <can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
-
machvec= [IA64] Force the use of a particular machine-vector
(machvec) in a generic kernel.
Example: machvec=hpzx1_swiotlb
@@ -1322,13 +1323,6 @@ and is between 256 and 4096 characters. It is defined in the file
be mounted
Format: <1-256>
- max_luns= [SCSI] Maximum number of LUNs to probe.
- Should be between 1 and 2^32-1.
-
- max_report_luns=
- [SCSI] Maximum number of LUNs received.
- Should be between 1 and 16384.
-
mcatest= [IA-64]
mce [X86-32] Machine Check Exception
@@ -1478,9 +1472,6 @@ and is between 256 and 4096 characters. It is defined in the file
that the amount of memory usable for all allocations
is not too small.
- mpu401= [HW,OSS]
- Format: <io>,<irq>
-
MTD_Partition= [MTD]
Format: <name>,<region-number>,<size>,<offset>
@@ -1528,19 +1519,6 @@ and is between 256 and 4096 characters. It is defined in the file
n2= [NET] SDL Inc. RISCom/N2 synchronous serial card
- NCR_D700= [HW,SCSI]
- See header of drivers/scsi/NCR_D700.c.
-
- ncr5380= [HW,SCSI]
-
- ncr53c400= [HW,SCSI]
-
- ncr53c400a= [HW,SCSI]
-
- ncr53c406a= [HW,SCSI]
-
- ncr53c8xx= [HW,SCSI]
-
netdev= [NET] Network devices parameters
Format: <irq>,<io>,<mem_start>,<mem_end>,<name>
Note that mem_start is often overloaded to mean
@@ -1552,8 +1530,7 @@ and is between 256 and 4096 characters. It is defined in the file
[NETFILTER] Enable connection tracking flow accounting
0 to disable accounting
1 to enable accounting
- Default value depends on CONFIG_NF_CT_ACCT that is
- going to be removed in 2.6.29.
+ Default value is 0.
nfsaddrs= [NFS]
See Documentation/filesystems/nfs/nfsroot.txt.
@@ -1710,6 +1687,7 @@ and is between 256 and 4096 characters. It is defined in the file
nointremap [X86-64, Intel-IOMMU] Do not enable interrupt
remapping.
+ [Deprecated - use intremap=off]
nointroute [IA-64]
@@ -1729,6 +1707,9 @@ and is between 256 and 4096 characters. It is defined in the file
nomfgpt [X86-32] Disable Multi-Function General Purpose
Timer usage (for AMD Geode machines).
+ nopat [X86] Disable PAT (page attribute table extension of
+ pagetables) support.
+
norandmaps Don't use address space randomization. Equivalent to
echo 0 > /proc/sys/kernel/randomize_va_space
@@ -1764,6 +1745,8 @@ and is between 256 and 4096 characters. It is defined in the file
nousb [USB] Disable the USB subsystem
+ nowatchdog [KNL] Disable the lockup detector.
+
nowb [ARM]
nox2apic [X86-64,APIC] Do not enable x2APIC mode.
@@ -1772,6 +1755,12 @@ and is between 256 and 4096 characters. It is defined in the file
purges which is reported from either PAL_VM_SUMMARY or
SAL PALO.
+ nr_cpus= [SMP] Maximum number of processors that an SMP kernel
+ could support. nr_cpus=n : n >= 1 limits the kernel to
+ supporting 'n' processors. Later in runtime you can not
+ use hotplug cpu feature to put more cpu back to online.
+ just like you compile the kernel NR_CPUS=n
+
nr_uarts= [SERIAL] maximum number of UARTs to be registered.
numa_zonelist_order= [KNL, BOOT] Select zonelist order for NUMA.
@@ -1795,9 +1784,6 @@ and is between 256 and 4096 characters. It is defined in the file
For example, to override I2C bus2:
omap_mux=i2c2_scl.i2c2_scl=0x100,i2c2_sda.i2c2_sda=0x100
- opl3= [HW,OSS]
- Format: <io>
-
oprofile.timer= [HW]
Use timer interrupt instead of performance counters
@@ -1809,9 +1795,8 @@ and is between 256 and 4096 characters. It is defined in the file
perfmon on Intel CPUs instead of the
CPU specific event set.
- osst= [HW,SCSI] SCSI Tape Driver
- Format: <buffer_size>,<write_threshold>
- See also Documentation/scsi/st.txt.
+ OSS [HW,OSS]
+ See Documentation/sound/oss/oss-parameters.txt
panic= [KNL] Kernel behaviour on panic
Format: <timeout>
@@ -1845,12 +1830,6 @@ and is between 256 and 4096 characters. It is defined in the file
Currently this function knows 686a and 8231 chips.
Format: [spp|ps2|epp|ecp|ecpepp]
- pas2= [HW,OSS] Format:
- <io>,<irq>,<dma>,<dma16>,<sb_io>,<sb_irq>,<sb_dma>,<sb_dma16>
-
- pas16= [HW,SCSI]
- See header of drivers/scsi/pas16.c.
-
pause_on_oops=
Halt all CPUs after the first oops has been printed for
the specified number of seconds. This is to be used if
@@ -1916,6 +1895,8 @@ and is between 256 and 4096 characters. It is defined in the file
norom [X86] Do not assign address space to
expansion ROMs that do not already have
BIOS assigned address ranges.
+ nobar [X86] Do not assign address space to the
+ BARs that weren't assigned by the BIOS.
irqmask=0xMMMM [X86] Set a bit mask of IRQs allowed to be
assigned automatically to PCI devices. You can
make the kernel exclude IRQs of your ISA cards
@@ -1939,8 +1920,12 @@ and is between 256 and 4096 characters. It is defined in the file
IRQ routing is enabled.
noacpi [X86] Do not use ACPI for IRQ routing
or for PCI scanning.
- use_crs [X86] Use _CRS for PCI resource
- allocation.
+ use_crs [X86] Use PCI host bridge window information
+ from ACPI. On BIOSes from 2008 or later, this
+ is enabled by default. If you need to use this,
+ please report a bug.
+ nocrs [X86] Ignore PCI host bridge windows from ACPI.
+ If you need to use this, please report a bug.
routeirq Do IRQ routing for all PCI devices.
This is normally done in pci_enable_device(),
so this option is a temporary workaround
@@ -1989,6 +1974,19 @@ and is between 256 and 4096 characters. It is defined in the file
force Enable ASPM even on devices that claim not to support it.
WARNING: Forcing ASPM on may cause system lockups.
+ pcie_ports= [PCIE] PCIe ports handling:
+ auto Ask the BIOS whether or not to use native PCIe services
+ associated with PCIe ports (PME, hot-plug, AER). Use
+ them only if that is allowed by the BIOS.
+ native Use native PCIe services associated with PCIe ports
+ unconditionally.
+ compat Treat PCIe ports as PCI-to-PCI bridges, disable the PCIe
+ ports driver.
+
+ pcie_pme= [PCIE,PM] Native PCIe PME signaling options:
+ nomsi Do not use MSI for native PCIe PME signaling (this makes
+ all PCIe root ports use INTx for all services).
+
pcmv= [HW,PCMCIA] BadgePAD 4
pd. [PARIDE]
@@ -2103,10 +2101,6 @@ and is between 256 and 4096 characters. It is defined in the file
[HW,MOUSE] Controls Logitech smartscroll autorepeat.
0 = disabled, 1 = enabled (default).
- pss= [HW,OSS] Personal Sound System (ECHO ESC614)
- Format:
- <io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq>
-
pt. [PARIDE]
See Documentation/blockdev/paride.txt.
@@ -2205,33 +2199,6 @@ and is between 256 and 4096 characters. It is defined in the file
sched_debug [KNL] Enables verbose scheduler debug messages.
- sc1200wdt= [HW,WDT] SC1200 WDT (watchdog) driver
- Format: <io>[,<timeout>[,<isapnp>]]
-
- scsi_debug_*= [SCSI]
- See drivers/scsi/scsi_debug.c.
-
- scsi_default_dev_flags=
- [SCSI] SCSI default device flags
- Format: <integer>
-
- scsi_dev_flags= [SCSI] Black/white list entry for vendor and model
- Format: <vendor>:<model>:<flags>
- (flags are integer value)
-
- scsi_logging_level= [SCSI] a bit mask of logging levels
- See drivers/scsi/scsi_logging.h for bits. Also
- settable via sysctl at dev.scsi.logging_level
- (/proc/sys/dev/scsi/logging_level).
- There is also a nice 'scsi_logging_level' script in the
- S390-tools package, available for download at
- http://www-128.ibm.com/developerworks/linux/linux390/s390-tools-1.5.4.html
-
- scsi_mod.scan= [SCSI] sync (default) scans SCSI busses as they are
- discovered. async scans them in kernel threads,
- allowing boot to proceed. none ignores them, expecting
- user space to do the scan.
-
security= [SECURITY] Choose a security module to enable at boot.
If this boot parameter is not specified, only the first
security module asking for security registration will be
@@ -2247,6 +2214,13 @@ and is between 256 and 4096 characters. It is defined in the file
If enabled at boot time, /selinux/disable can be used
later to disable prior to initial policy load.
+ apparmor= [APPARMOR] Disable or enable AppArmor at boot time
+ Format: { "0" | "1" }
+ See security/apparmor/Kconfig help text
+ 0 -- disable.
+ 1 -- enable.
+ Default value is set via kernel config option.
+
serialnumber [BUGS=X86-32]
shapers= [NET]
@@ -2258,9 +2232,6 @@ and is between 256 and 4096 characters. It is defined in the file
The parameter means the number of CPUs to show,
for example 1 means boot CPU only.
- sim710= [SCSI,HW]
- See header of drivers/scsi/sim710.c.
-
simeth= [IA-64]
simscsi=
@@ -2318,128 +2289,6 @@ and is between 256 and 4096 characters. It is defined in the file
1: Fast pin select (default)
2: ATC IRMode
- snd-ad1816a= [HW,ALSA]
-
- snd-ad1848= [HW,ALSA]
-
- snd-ali5451= [HW,ALSA]
-
- snd-als100= [HW,ALSA]
-
- snd-als4000= [HW,ALSA]
-
- snd-azt2320= [HW,ALSA]
-
- snd-cmi8330= [HW,ALSA]
-
- snd-cmipci= [HW,ALSA]
-
- snd-cs4231= [HW,ALSA]
-
- snd-cs4232= [HW,ALSA]
-
- snd-cs4236= [HW,ALSA]
-
- snd-cs4281= [HW,ALSA]
-
- snd-cs46xx= [HW,ALSA]
-
- snd-dt019x= [HW,ALSA]
-
- snd-dummy= [HW,ALSA]
-
- snd-emu10k1= [HW,ALSA]
-
- snd-ens1370= [HW,ALSA]
-
- snd-ens1371= [HW,ALSA]
-
- snd-es968= [HW,ALSA]
-
- snd-es1688= [HW,ALSA]
-
- snd-es18xx= [HW,ALSA]
-
- snd-es1938= [HW,ALSA]
-
- snd-es1968= [HW,ALSA]
-
- snd-fm801= [HW,ALSA]
-
- snd-gusclassic= [HW,ALSA]
-
- snd-gusextreme= [HW,ALSA]
-
- snd-gusmax= [HW,ALSA]
-
- snd-hdsp= [HW,ALSA]
-
- snd-ice1712= [HW,ALSA]
-
- snd-intel8x0= [HW,ALSA]
-
- snd-interwave= [HW,ALSA]
-
- snd-interwave-stb=
- [HW,ALSA]
-
- snd-korg1212= [HW,ALSA]
-
- snd-maestro3= [HW,ALSA]
-
- snd-mpu401= [HW,ALSA]
-
- snd-mtpav= [HW,ALSA]
-
- snd-nm256= [HW,ALSA]
-
- snd-opl3sa2= [HW,ALSA]
-
- snd-opti92x-ad1848=
- [HW,ALSA]
-
- snd-opti92x-cs4231=
- [HW,ALSA]
-
- snd-opti93x= [HW,ALSA]
-
- snd-pmac= [HW,ALSA]
-
- snd-rme32= [HW,ALSA]
-
- snd-rme96= [HW,ALSA]
-
- snd-rme9652= [HW,ALSA]
-
- snd-sb8= [HW,ALSA]
-
- snd-sb16= [HW,ALSA]
-
- snd-sbawe= [HW,ALSA]
-
- snd-serial= [HW,ALSA]
-
- snd-sgalaxy= [HW,ALSA]
-
- snd-sonicvibes= [HW,ALSA]
-
- snd-sun-amd7930=
- [HW,ALSA]
-
- snd-sun-cs4231= [HW,ALSA]
-
- snd-trident= [HW,ALSA]
-
- snd-usb-audio= [HW,ALSA,USB]
-
- snd-via82xx= [HW,ALSA]
-
- snd-virmidi= [HW,ALSA]
-
- snd-wavefront= [HW,ALSA]
-
- snd-ymfpci= [HW,ALSA]
-
softlockup_panic=
[KNL] Should the soft-lockup detector generate panics.
@@ -2454,12 +2303,6 @@ and is between 256 and 4096 characters. It is defined in the file
spia_pedr=
spia_peddr=
- sscape= [HW,OSS]
- Format: <io>,<irq>,<dma>,<mpu_io>,<mpu_irq>
-
- st= [HW,SCSI] SCSI tape parameters (buffers, etc.)
- See Documentation/scsi/st.txt.
-
stacktrace [FTRACE]
Enabled the stack tracer on boot up.
@@ -2517,18 +2360,12 @@ and is between 256 and 4096 characters. It is defined in the file
switches= [HW,M68k]
- sym53c416= [HW,SCSI]
- See header of drivers/scsi/sym53c416.c.
-
sysrq_always_enabled
[KNL]
Ignore sysrq setting - this boot parameter will
neutralize any effect of /proc/sys/kernel/sysrq.
Useful for debugging.
- t128= [HW,SCSI]
- See header of drivers/scsi/t128.c.
-
tdfx= [HW,DRM]
test_suspend= [SUSPEND]
@@ -2565,10 +2402,6 @@ and is between 256 and 4096 characters. It is defined in the file
<deci-seconds>: poll all this frequency
0: no polling (default)
- tmscsim= [HW,SCSI]
- See comment before function dc390_setup() in
- drivers/scsi/tmscsim.c.
-
topology= [S390]
Format: {off | on}
Specify if the kernel should make use of the cpu
@@ -2579,6 +2412,15 @@ and is between 256 and 4096 characters. It is defined in the file
tp720= [HW,PS2]
+ tpm_suspend_pcr=[HW,TPM]
+ Format: integer pcr id
+ Specify that at suspend time, the tpm driver
+ should extend the specified pcr with zeros,
+ as a workaround for some chips which fail to
+ flush the last written pcr on TPM_SaveState.
+ This will guarantee that all the other pcrs
+ are saved.
+
trace_buf_size=nn[KMG]
[FTRACE] will set tracing buffer size.
@@ -2587,10 +2429,6 @@ and is between 256 and 4096 characters. It is defined in the file
to facilitate early boot debugging.
See also Documentation/trace/events.txt
- trix= [HW,OSS] MediaTrix AudioTrix Pro
- Format:
- <io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
-
tsc= Disable clocksource-must-verify flag for TSC.
Format: <string>
[x86] reliable: mark tsc clocksource as reliable, this
@@ -2604,15 +2442,6 @@ and is between 256 and 4096 characters. It is defined in the file
<port#>,<js1>,<js2>,<js3>,<js4>,<js5>,<js6>,<js7>
See also Documentation/input/joystick-parport.txt
- u14-34f= [HW,SCSI] UltraStor 14F/34F SCSI host adapter
- See header of drivers/scsi/u14-34f.c.
-
- uart401= [HW,OSS]
- Format: <io>,<irq>
-
- uart6850= [HW,OSS]
- Format: <io>,<irq>
-
uhash_entries= [KNL,NET]
Set number of hash buckets for UDP/UDP-Lite connections
@@ -2694,6 +2523,13 @@ and is between 256 and 4096 characters. It is defined in the file
medium is write-protected).
Example: quirks=0419:aaf5:rl,0421:0433:rc
+ userpte=
+ [X86] Flags controlling user PTE allocations.
+
+ nohigh = do not allocate PTE pages in
+ HIGHMEM regardless of setting
+ of CONFIG_HIGHPTE.
+
vdso= [X86,SH]
vdso=2: enable compat VDSO (default with COMPAT_VDSO)
vdso=1: enable VDSO (default)
@@ -2771,25 +2607,36 @@ and is between 256 and 4096 characters. It is defined in the file
overridden by individual drivers. 0 will hide
cursors, 1 will display them.
- waveartist= [HW,OSS]
- Format: <io>,<irq>,<dma>,<dma2>
-
- wd33c93= [HW,SCSI]
- See header of drivers/scsi/wd33c93.c.
-
- wd7000= [HW,SCSI]
- See header of drivers/scsi/wd7000.c.
-
- wdt= [WDT] Watchdog
- See Documentation/watchdog/wdt.txt.
+ watchdog timers [HW,WDT] For information on watchdog timers,
+ see Documentation/watchdog/watchdog-parameters.txt
+ or other driver-specific files in the
+ Documentation/watchdog/ directory.
x2apic_phys [X86-64,APIC] Use x2apic physical mode instead of
default x2apic cluster mode on platforms
supporting x2apic.
+ x86_mrst_timer= [X86-32,APBT]
+ Choose timer option for x86 Moorestown MID platform.
+ Two valid options are apbt timer only and lapic timer
+ plus one apbt timer for broadcast timer.
+ x86_mrst_timer=apbt_only | lapic_and_apbt
+
xd= [HW,XT] Original XT pre-IDE (RLL encoded) disks.
xd_geo= See header of drivers/block/xd.c.
+ xen_emul_unplug= [HW,X86,XEN]
+ Unplug Xen emulated devices
+ Format: [unplug0,][unplug1]
+ ide-disks -- unplug primary master IDE devices
+ aux-ide-disks -- unplug non-primary-master IDE devices
+ nics -- unplug network devices
+ all -- unplug all emulated devices (NICs and IDE disks)
+ unnecessary -- unplugging emulated devices is
+ unnecessary even if the host did not respond to
+ the unplug protocol
+ never -- do not unplug even if version check succeeds
+
xirc2ps_cs= [NET,PCMCIA]
Format:
<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
@@ -2798,5 +2645,4 @@ ______________________________________________________________________
TODO:
- Add documentation for ALSA options.
Add more DRM drivers.
diff --git a/Documentation/ko_KR/HOWTO b/Documentation/ko_KR/HOWTO
index 029fca914c0..e3a55b6091e 100644
--- a/Documentation/ko_KR/HOWTO
+++ b/Documentation/ko_KR/HOWTO
@@ -122,7 +122,7 @@ mtk.manpages@gmail.com의 메인테이너에게 보낼 것을 권장한다.
올바른 패치들을 만드는 법에 관한 훌륭한 다른 문서들이 있다.
"The Perfect Patch"
- http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+ http://userweb.kernel.org/~akpm/stuff/tpp.txt
"Linux kernel patch submission format"
http://linux.yyz.us/patch-format.html
@@ -192,7 +192,7 @@ Documentation/DocBook/ 디렉토리 내에서 만들어지며 PDF, Postscript, H
여러분이 어디서 시작해야 할진 모르지만 커널 개발 커뮤니티에 참여할 수
있는 일들을 찾길 원한다면 리눅스 커널 Janitor 프로젝트를 살펴봐라.
- http://janitor.kernelnewbies.org/
+ http://kernelnewbies.org/KernelJanitors
그곳은 시작하기에 훌륭한 장소이다. 그곳은 리눅스 커널 소스 트리내에
간단히 정리되고 수정될 수 있는 문제들에 관하여 설명한다. 여러분은 이
프로젝트를 대표하는 개발자들과 일하면서 자신의 패치를 리눅스 커널 트리에
@@ -596,7 +596,7 @@ Pat이라는 이름을 가진 여자가 있을 수도 있는 것이다. 리눅
이것이 무엇인지 더 자세한 것을 알고 싶다면 다음 문서의 ChageLog 항을 봐라.
"The Perfect Patch"
- http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+ http://userweb.kernel.org/~akpm/stuff/tpp.txt
@@ -610,7 +610,7 @@ Pat이라는 이름을 가진 여자가 있을 수도 있는 것이다. 리눅
----------
-"개발 프로세스"(http://linux.tar.gz/articles/2.6-development_process) 섹션을
+"개발 프로세스"(http://lwn.net/Articles/94386/) 섹션을
작성하는데 있어 참고할 문서를 사용하도록 허락해준 Paolo Ciarrocchi에게
감사한다. 여러분들이 말해야 할 것과 말해서는 안되는 것의 목록 중 일부를 제공해준
Randy Dunlap과 Gerrit Huizenga에게 감사한다. 또한 검토와 의견 그리고
diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt
index c79ab996dad..3ab2472509c 100644
--- a/Documentation/kobject.txt
+++ b/Documentation/kobject.txt
@@ -59,37 +59,56 @@ nice to have in other objects. The C language does not allow for the
direct expression of inheritance, so other techniques - such as structure
embedding - must be used.
-So, for example, the UIO code has a structure that defines the memory
-region associated with a uio device:
+(As an aside, for those familiar with the kernel linked list implementation,
+this is analogous as to how "list_head" structs are rarely useful on
+their own, but are invariably found embedded in the larger objects of
+interest.)
-struct uio_mem {
+So, for example, the UIO code in drivers/uio/uio.c has a structure that
+defines the memory region associated with a uio device:
+
+ struct uio_map {
struct kobject kobj;
- unsigned long addr;
- unsigned long size;
- int memtype;
- void __iomem *internal_addr;
-};
+ struct uio_mem *mem;
+ };
-If you have a struct uio_mem structure, finding its embedded kobject is
+If you have a struct uio_map structure, finding its embedded kobject is
just a matter of using the kobj member. Code that works with kobjects will
often have the opposite problem, however: given a struct kobject pointer,
what is the pointer to the containing structure? You must avoid tricks
(such as assuming that the kobject is at the beginning of the structure)
and, instead, use the container_of() macro, found in <linux/kernel.h>:
- container_of(pointer, type, member)
+ container_of(pointer, type, member)
+
+where:
+
+ * "pointer" is the pointer to the embedded kobject,
+ * "type" is the type of the containing structure, and
+ * "member" is the name of the structure field to which "pointer" points.
+
+The return value from container_of() is a pointer to the corresponding
+container type. So, for example, a pointer "kp" to a struct kobject
+embedded *within* a struct uio_map could be converted to a pointer to the
+*containing* uio_map structure with:
+
+ struct uio_map *u_map = container_of(kp, struct uio_map, kobj);
+
+For convenience, programmers often define a simple macro for "back-casting"
+kobject pointers to the containing type. Exactly this happens in the
+earlier drivers/uio/uio.c, as you can see here:
+
+ struct uio_map {
+ struct kobject kobj;
+ struct uio_mem *mem;
+ };
-where pointer is the pointer to the embedded kobject, type is the type of
-the containing structure, and member is the name of the structure field to
-which pointer points. The return value from container_of() is a pointer to
-the given type. So, for example, a pointer "kp" to a struct kobject
-embedded within a struct uio_mem could be converted to a pointer to the
-containing uio_mem structure with:
+ #define to_map(map) container_of(map, struct uio_map, kobj)
- struct uio_mem *u_mem = container_of(kp, struct uio_mem, kobj);
+where the macro argument "map" is a pointer to the struct kobject in
+question. That macro is subsequently invoked with:
-Programmers often define a simple macro for "back-casting" kobject pointers
-to the containing type.
+ struct uio_map *map = to_map(kobj);
Initialization of kobjects
@@ -266,7 +285,7 @@ kobj_type:
struct kobj_type {
void (*release)(struct kobject *);
- struct sysfs_ops *sysfs_ops;
+ const struct sysfs_ops *sysfs_ops;
struct attribute **default_attrs;
};
@@ -387,4 +406,5 @@ called, and the objects in the former circle release each other.
Example code to copy from
For a more complete example of using ksets and kobjects properly, see the
-sample/kobject/kset-example.c code.
+example programs samples/kobject/{kobject-example.c,kset-example.c},
+which will be built as loadable modules if you select CONFIG_SAMPLE_KOBJECT.
diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
index 053037a1fe6..1762b81fcdf 100644
--- a/Documentation/kprobes.txt
+++ b/Documentation/kprobes.txt
@@ -1,6 +1,7 @@
Title : Kernel Probes (Kprobes)
Authors : Jim Keniston <jkenisto@us.ibm.com>
- : Prasanna S Panchamukhi <prasanna@in.ibm.com>
+ : Prasanna S Panchamukhi <prasanna.panchamukhi@gmail.com>
+ : Masami Hiramatsu <mhiramat@redhat.com>
CONTENTS
@@ -15,6 +16,7 @@ CONTENTS
9. Jprobes Example
10. Kretprobes Example
Appendix A: The kprobes debugfs interface
+Appendix B: The kprobes sysctl interface
1. Concepts: Kprobes, Jprobes, Return Probes
@@ -42,13 +44,13 @@ registration/unregistration of a group of *probes. These functions
can speed up unregistration process when you have to unregister
a lot of probes at once.
-The next three subsections explain how the different types of
-probes work. They explain certain things that you'll need to
-know in order to make the best use of Kprobes -- e.g., the
-difference between a pre_handler and a post_handler, and how
-to use the maxactive and nmissed fields of a kretprobe. But
-if you're in a hurry to start using Kprobes, you can skip ahead
-to section 2.
+The next four subsections explain how the different types of
+probes work and how jump optimization works. They explain certain
+things that you'll need to know in order to make the best use of
+Kprobes -- e.g., the difference between a pre_handler and
+a post_handler, and how to use the maxactive and nmissed fields of
+a kretprobe. But if you're in a hurry to start using Kprobes, you
+can skip ahead to section 2.
1.1 How Does a Kprobe Work?
@@ -161,18 +163,129 @@ In case probed function is entered but there is no kretprobe_instance
object available, then in addition to incrementing the nmissed count,
the user entry_handler invocation is also skipped.
+1.4 How Does Jump Optimization Work?
+
+If your kernel is built with CONFIG_OPTPROBES=y (currently this flag
+is automatically set 'y' on x86/x86-64, non-preemptive kernel) and
+the "debug.kprobes_optimization" kernel parameter is set to 1 (see
+sysctl(8)), Kprobes tries to reduce probe-hit overhead by using a jump
+instruction instead of a breakpoint instruction at each probepoint.
+
+1.4.1 Init a Kprobe
+
+When a probe is registered, before attempting this optimization,
+Kprobes inserts an ordinary, breakpoint-based kprobe at the specified
+address. So, even if it's not possible to optimize this particular
+probepoint, there'll be a probe there.
+
+1.4.2 Safety Check
+
+Before optimizing a probe, Kprobes performs the following safety checks:
+
+- Kprobes verifies that the region that will be replaced by the jump
+instruction (the "optimized region") lies entirely within one function.
+(A jump instruction is multiple bytes, and so may overlay multiple
+instructions.)
+
+- Kprobes analyzes the entire function and verifies that there is no
+jump into the optimized region. Specifically:
+ - the function contains no indirect jump;
+ - the function contains no instruction that causes an exception (since
+ the fixup code triggered by the exception could jump back into the
+ optimized region -- Kprobes checks the exception tables to verify this);
+ and
+ - there is no near jump to the optimized region (other than to the first
+ byte).
+
+- For each instruction in the optimized region, Kprobes verifies that
+the instruction can be executed out of line.
+
+1.4.3 Preparing Detour Buffer
+
+Next, Kprobes prepares a "detour" buffer, which contains the following
+instruction sequence:
+- code to push the CPU's registers (emulating a breakpoint trap)
+- a call to the trampoline code which calls user's probe handlers.
+- code to restore registers
+- the instructions from the optimized region
+- a jump back to the original execution path.
+
+1.4.4 Pre-optimization
+
+After preparing the detour buffer, Kprobes verifies that none of the
+following situations exist:
+- The probe has either a break_handler (i.e., it's a jprobe) or a
+post_handler.
+- Other instructions in the optimized region are probed.
+- The probe is disabled.
+In any of the above cases, Kprobes won't start optimizing the probe.
+Since these are temporary situations, Kprobes tries to start
+optimizing it again if the situation is changed.
+
+If the kprobe can be optimized, Kprobes enqueues the kprobe to an
+optimizing list, and kicks the kprobe-optimizer workqueue to optimize
+it. If the to-be-optimized probepoint is hit before being optimized,
+Kprobes returns control to the original instruction path by setting
+the CPU's instruction pointer to the copied code in the detour buffer
+-- thus at least avoiding the single-step.
+
+1.4.5 Optimization
+
+The Kprobe-optimizer doesn't insert the jump instruction immediately;
+rather, it calls synchronize_sched() for safety first, because it's
+possible for a CPU to be interrupted in the middle of executing the
+optimized region(*). As you know, synchronize_sched() can ensure
+that all interruptions that were active when synchronize_sched()
+was called are done, but only if CONFIG_PREEMPT=n. So, this version
+of kprobe optimization supports only kernels with CONFIG_PREEMPT=n.(**)
+
+After that, the Kprobe-optimizer calls stop_machine() to replace
+the optimized region with a jump instruction to the detour buffer,
+using text_poke_smp().
+
+1.4.6 Unoptimization
+
+When an optimized kprobe is unregistered, disabled, or blocked by
+another kprobe, it will be unoptimized. If this happens before
+the optimization is complete, the kprobe is just dequeued from the
+optimized list. If the optimization has been done, the jump is
+replaced with the original code (except for an int3 breakpoint in
+the first byte) by using text_poke_smp().
+
+(*)Please imagine that the 2nd instruction is interrupted and then
+the optimizer replaces the 2nd instruction with the jump *address*
+while the interrupt handler is running. When the interrupt
+returns to original address, there is no valid instruction,
+and it causes an unexpected result.
+
+(**)This optimization-safety checking may be replaced with the
+stop-machine method that ksplice uses for supporting a CONFIG_PREEMPT=y
+kernel.
+
+NOTE for geeks:
+The jump optimization changes the kprobe's pre_handler behavior.
+Without optimization, the pre_handler can change the kernel's execution
+path by changing regs->ip and returning 1. However, when the probe
+is optimized, that modification is ignored. Thus, if you want to
+tweak the kernel's execution path, you need to suppress optimization,
+using one of the following techniques:
+- Specify an empty function for the kprobe's post_handler or break_handler.
+ or
+- Execute 'sysctl -w debug.kprobes_optimization=n'
+
2. Architectures Supported
Kprobes, jprobes, and return probes are implemented on the following
architectures:
-- i386
-- x86_64 (AMD-64, EM64T)
+- i386 (Supports jump optimization)
+- x86_64 (AMD-64, EM64T) (Supports jump optimization)
- ppc64
- ia64 (Does not support probes on instruction slot1.)
- sparc64 (Return probes not yet implemented.)
- arm
- ppc
+- mips
3. Configuring Kprobes
@@ -214,7 +327,7 @@ occurs during execution of kp->pre_handler or kp->post_handler,
or during single-stepping of the probed instruction, Kprobes calls
kp->fault_handler. Any or all handlers can be NULL. If kp->flags
is set KPROBE_FLAG_DISABLED, that kp will be registered but disabled,
-so, it's handlers aren't hit until calling enable_kprobe(kp).
+so, its handlers aren't hit until calling enable_kprobe(kp).
NOTE:
1. With the introduction of the "symbol_name" field to struct kprobe,
@@ -389,7 +502,10 @@ the probe which has been registered.
Kprobes allows multiple probes at the same address. Currently,
however, there cannot be multiple jprobes on the same function at
-the same time.
+the same time. Also, a probepoint for which there is a jprobe or
+a post_handler cannot be optimized. So if you install a jprobe,
+or a kprobe with a post_handler, at an optimized probepoint, the
+probepoint will be unoptimized automatically.
In general, you can install a probe anywhere in the kernel.
In particular, you can probe interrupt handlers. Known exceptions
@@ -453,6 +569,38 @@ reason, Kprobes doesn't support return probes (or kprobes or jprobes)
on the x86_64 version of __switch_to(); the registration functions
return -EINVAL.
+On x86/x86-64, since the Jump Optimization of Kprobes modifies
+instructions widely, there are some limitations to optimization. To
+explain it, we introduce some terminology. Imagine a 3-instruction
+sequence consisting of a two 2-byte instructions and one 3-byte
+instruction.
+
+ IA
+ |
+[-2][-1][0][1][2][3][4][5][6][7]
+ [ins1][ins2][ ins3 ]
+ [<- DCR ->]
+ [<- JTPR ->]
+
+ins1: 1st Instruction
+ins2: 2nd Instruction
+ins3: 3rd Instruction
+IA: Insertion Address
+JTPR: Jump Target Prohibition Region
+DCR: Detoured Code Region
+
+The instructions in DCR are copied to the out-of-line buffer
+of the kprobe, because the bytes in DCR are replaced by
+a 5-byte jump instruction. So there are several limitations.
+
+a) The instructions in DCR must be relocatable.
+b) The instructions in DCR must not include a call instruction.
+c) JTPR must not be targeted by any jump or call instruction.
+d) DCR must not straddle the border betweeen functions.
+
+Anyway, these limitations are checked by the in-kernel instruction
+decoder, so you don't need to worry about that.
+
6. Probe Overhead
On a typical CPU in use in 2005, a kprobe hit takes 0.5 to 1.0
@@ -476,6 +624,19 @@ k = 0.49 usec; j = 0.76; r = 0.80; kr = 0.82; jr = 1.07
ppc64: POWER5 (gr), 1656 MHz (SMT disabled, 1 virtual CPU per physical CPU)
k = 0.77 usec; j = 1.31; r = 1.26; kr = 1.45; jr = 1.99
+6.1 Optimized Probe Overhead
+
+Typically, an optimized kprobe hit takes 0.07 to 0.1 microseconds to
+process. Here are sample overhead figures (in usec) for x86 architectures.
+k = unoptimized kprobe, b = boosted (single-step skipped), o = optimized kprobe,
+r = unoptimized kretprobe, rb = boosted kretprobe, ro = optimized kretprobe.
+
+i386: Intel(R) Xeon(R) E5410, 2.33GHz, 4656.90 bogomips
+k = 0.80 usec; b = 0.33; o = 0.05; r = 1.10; rb = 0.61; ro = 0.33
+
+x86-64: Intel(R) Xeon(R) E5410, 2.33GHz, 4656.90 bogomips
+k = 0.99 usec; b = 0.43; o = 0.06; r = 1.24; rb = 0.68; ro = 0.30
+
7. TODO
a. SystemTap (http://sourceware.org/systemtap): Provides a simplified
@@ -523,7 +684,8 @@ is also specified. Following columns show probe status. If the probe is on
a virtual address that is no longer valid (module init sections, module
virtual addresses that correspond to modules that've been unloaded),
such probes are marked with [GONE]. If the probe is temporarily disabled,
-such probes are marked with [DISABLED].
+such probes are marked with [DISABLED]. If the probe is optimized, it is
+marked with [OPTIMIZED].
/sys/kernel/debug/kprobes/enabled: Turn kprobes ON/OFF forcibly.
@@ -533,3 +695,19 @@ registered probes will be disarmed, till such time a "1" is echoed to this
file. Note that this knob just disarms and arms all kprobes and doesn't
change each probe's disabling state. This means that disabled kprobes (marked
[DISABLED]) will be not enabled if you turn ON all kprobes by this knob.
+
+
+Appendix B: The kprobes sysctl interface
+
+/proc/sys/debug/kprobes-optimization: Turn kprobes optimization ON/OFF.
+
+When CONFIG_OPTPROBES=y, this sysctl interface appears and it provides
+a knob to globally and forcibly turn jump optimization (see section
+1.4) ON or OFF. By default, jump optimization is allowed (ON).
+If you echo "0" to this file or set "debug.kprobes_optimization" to
+0 via sysctl, all optimized probes will be unoptimized, and any new
+probes registered after that will not be optimized. Note that this
+knob *changes* the optimized state. This means that optimized probes
+(marked [OPTIMIZED]) will be unoptimized ([OPTIMIZED] tag will be
+removed). If the knob is turned on, they will be optimized again.
+
diff --git a/Documentation/kvm/api.txt b/Documentation/kvm/api.txt
index 2811e452f75..5f5b64982b1 100644
--- a/Documentation/kvm/api.txt
+++ b/Documentation/kvm/api.txt
@@ -23,12 +23,12 @@ of a virtual machine. The ioctls belong to three classes
Only run vcpu ioctls from the same thread that was used to create the
vcpu.
-2. File descritpors
+2. File descriptors
The kvm API is centered around file descriptors. An initial
open("/dev/kvm") obtains a handle to the kvm subsystem; this handle
can be used to issue system ioctls. A KVM_CREATE_VM ioctl on this
-handle will create a VM file descripror which can be used to issue VM
+handle will create a VM file descriptor which can be used to issue VM
ioctls. A KVM_CREATE_VCPU ioctl on a VM fd will create a virtual cpu
and return a file descriptor pointing to it. Finally, ioctls on a vcpu
fd can be used to control the vcpu, including the important task of
@@ -126,6 +126,10 @@ user fills in the size of the indices array in nmsrs, and in return
kvm adjusts nmsrs to reflect the actual number of msrs and fills in
the indices array with their numbers.
+Note: if kvm indicates supports MCE (KVM_CAP_MCE), then the MCE bank MSRs are
+not returned in the MSR list, as different vcpus can have a different number
+of banks, as set via the KVM_X86_SETUP_MCE ioctl.
+
4.4 KVM_CHECK_EXTENSION
Capability: basic
@@ -160,29 +164,7 @@ Type: vm ioctl
Parameters: struct kvm_memory_region (in)
Returns: 0 on success, -1 on error
-struct kvm_memory_region {
- __u32 slot;
- __u32 flags;
- __u64 guest_phys_addr;
- __u64 memory_size; /* bytes */
-};
-
-/* for kvm_memory_region::flags */
-#define KVM_MEM_LOG_DIRTY_PAGES 1UL
-
-This ioctl allows the user to create or modify a guest physical memory
-slot. When changing an existing slot, it may be moved in the guest
-physical memory space, or its flags may be modified. It may not be
-resized. Slots may not overlap.
-
-The flags field supports just one flag, KVM_MEM_LOG_DIRTY_PAGES, which
-instructs kvm to keep track of writes to memory within the slot. See
-the KVM_GET_DIRTY_LOG ioctl.
-
-It is recommended to use the KVM_SET_USER_MEMORY_REGION ioctl instead
-of this API, if available. This newer API allows placing guest memory
-at specified locations in the host address space, yielding better
-control and easy access.
+This ioctl is obsolete and has been removed.
4.6 KVM_CREATE_VCPU
@@ -226,17 +208,7 @@ Type: vm ioctl
Parameters: struct kvm_memory_alias (in)
Returns: 0 (success), -1 (error)
-struct kvm_memory_alias {
- __u32 slot; /* this has a different namespace than memory slots */
- __u32 flags;
- __u64 guest_phys_addr;
- __u64 memory_size;
- __u64 target_phys_addr;
-};
-
-Defines a guest physical address space region as an alias to another
-region. Useful for aliased address, for example the VGA low memory
-window. Should not be used with userspace memory.
+This ioctl is obsolete and has been removed.
4.9 KVM_RUN
@@ -643,7 +615,7 @@ Type: vm ioctl
Parameters: struct kvm_clock_data (in)
Returns: 0 on success, -1 on error
-Sets the current timestamp of kvmclock to the valued specific in its parameter.
+Sets the current timestamp of kvmclock to the value specified in its parameter.
In conjunction with KVM_GET_CLOCK, it is used to ensure monotonicity on scenarios
such as migration.
@@ -656,6 +628,7 @@ struct kvm_clock_data {
4.29 KVM_GET_VCPU_EVENTS
Capability: KVM_CAP_VCPU_EVENTS
+Extended by: KVM_CAP_INTR_SHADOW
Architectures: x86
Type: vm ioctl
Parameters: struct kvm_vcpu_event (out)
@@ -676,7 +649,7 @@ struct kvm_vcpu_events {
__u8 injected;
__u8 nr;
__u8 soft;
- __u8 pad;
+ __u8 shadow;
} interrupt;
struct {
__u8 injected;
@@ -688,9 +661,13 @@ struct kvm_vcpu_events {
__u32 flags;
};
+KVM_VCPUEVENT_VALID_SHADOW may be set in the flags field to signal that
+interrupt.shadow contains a valid state. Otherwise, this field is undefined.
+
4.30 KVM_SET_VCPU_EVENTS
Capability: KVM_CAP_VCPU_EVENTS
+Extended by: KVM_CAP_INTR_SHADOW
Architectures: x86
Type: vm ioctl
Parameters: struct kvm_vcpu_event (in)
@@ -709,6 +686,351 @@ current in-kernel state. The bits are:
KVM_VCPUEVENT_VALID_NMI_PENDING - transfer nmi.pending to the kernel
KVM_VCPUEVENT_VALID_SIPI_VECTOR - transfer sipi_vector
+If KVM_CAP_INTR_SHADOW is available, KVM_VCPUEVENT_VALID_SHADOW can be set in
+the flags field to signal that interrupt.shadow contains a valid state and
+shall be written into the VCPU.
+
+4.32 KVM_GET_DEBUGREGS
+
+Capability: KVM_CAP_DEBUGREGS
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_debugregs (out)
+Returns: 0 on success, -1 on error
+
+Reads debug registers from the vcpu.
+
+struct kvm_debugregs {
+ __u64 db[4];
+ __u64 dr6;
+ __u64 dr7;
+ __u64 flags;
+ __u64 reserved[9];
+};
+
+4.33 KVM_SET_DEBUGREGS
+
+Capability: KVM_CAP_DEBUGREGS
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_debugregs (in)
+Returns: 0 on success, -1 on error
+
+Writes debug registers into the vcpu.
+
+See KVM_GET_DEBUGREGS for the data structure. The flags field is unused
+yet and must be cleared on entry.
+
+4.34 KVM_SET_USER_MEMORY_REGION
+
+Capability: KVM_CAP_USER_MEM
+Architectures: all
+Type: vm ioctl
+Parameters: struct kvm_userspace_memory_region (in)
+Returns: 0 on success, -1 on error
+
+struct kvm_userspace_memory_region {
+ __u32 slot;
+ __u32 flags;
+ __u64 guest_phys_addr;
+ __u64 memory_size; /* bytes */
+ __u64 userspace_addr; /* start of the userspace allocated memory */
+};
+
+/* for kvm_memory_region::flags */
+#define KVM_MEM_LOG_DIRTY_PAGES 1UL
+
+This ioctl allows the user to create or modify a guest physical memory
+slot. When changing an existing slot, it may be moved in the guest
+physical memory space, or its flags may be modified. It may not be
+resized. Slots may not overlap in guest physical address space.
+
+Memory for the region is taken starting at the address denoted by the
+field userspace_addr, which must point at user addressable memory for
+the entire memory slot size. Any object may back this memory, including
+anonymous memory, ordinary files, and hugetlbfs.
+
+It is recommended that the lower 21 bits of guest_phys_addr and userspace_addr
+be identical. This allows large pages in the guest to be backed by large
+pages in the host.
+
+The flags field supports just one flag, KVM_MEM_LOG_DIRTY_PAGES, which
+instructs kvm to keep track of writes to memory within the slot. See
+the KVM_GET_DIRTY_LOG ioctl.
+
+When the KVM_CAP_SYNC_MMU capability, changes in the backing of the memory
+region are automatically reflected into the guest. For example, an mmap()
+that affects the region will be made visible immediately. Another example
+is madvise(MADV_DROP).
+
+It is recommended to use this API instead of the KVM_SET_MEMORY_REGION ioctl.
+The KVM_SET_MEMORY_REGION does not allow fine grained control over memory
+allocation and is deprecated.
+
+4.35 KVM_SET_TSS_ADDR
+
+Capability: KVM_CAP_SET_TSS_ADDR
+Architectures: x86
+Type: vm ioctl
+Parameters: unsigned long tss_address (in)
+Returns: 0 on success, -1 on error
+
+This ioctl defines the physical address of a three-page region in the guest
+physical address space. The region must be within the first 4GB of the
+guest physical address space and must not conflict with any memory slot
+or any mmio address. The guest may malfunction if it accesses this memory
+region.
+
+This ioctl is required on Intel-based hosts. This is needed on Intel hardware
+because of a quirk in the virtualization implementation (see the internals
+documentation when it pops into existence).
+
+4.36 KVM_ENABLE_CAP
+
+Capability: KVM_CAP_ENABLE_CAP
+Architectures: ppc
+Type: vcpu ioctl
+Parameters: struct kvm_enable_cap (in)
+Returns: 0 on success; -1 on error
+
++Not all extensions are enabled by default. Using this ioctl the application
+can enable an extension, making it available to the guest.
+
+On systems that do not support this ioctl, it always fails. On systems that
+do support it, it only works for extensions that are supported for enablement.
+
+To check if a capability can be enabled, the KVM_CHECK_EXTENSION ioctl should
+be used.
+
+struct kvm_enable_cap {
+ /* in */
+ __u32 cap;
+
+The capability that is supposed to get enabled.
+
+ __u32 flags;
+
+A bitfield indicating future enhancements. Has to be 0 for now.
+
+ __u64 args[4];
+
+Arguments for enabling a feature. If a feature needs initial values to
+function properly, this is the place to put them.
+
+ __u8 pad[64];
+};
+
+4.37 KVM_GET_MP_STATE
+
+Capability: KVM_CAP_MP_STATE
+Architectures: x86, ia64
+Type: vcpu ioctl
+Parameters: struct kvm_mp_state (out)
+Returns: 0 on success; -1 on error
+
+struct kvm_mp_state {
+ __u32 mp_state;
+};
+
+Returns the vcpu's current "multiprocessing state" (though also valid on
+uniprocessor guests).
+
+Possible values are:
+
+ - KVM_MP_STATE_RUNNABLE: the vcpu is currently running
+ - KVM_MP_STATE_UNINITIALIZED: the vcpu is an application processor (AP)
+ which has not yet received an INIT signal
+ - KVM_MP_STATE_INIT_RECEIVED: the vcpu has received an INIT signal, and is
+ now ready for a SIPI
+ - KVM_MP_STATE_HALTED: the vcpu has executed a HLT instruction and
+ is waiting for an interrupt
+ - KVM_MP_STATE_SIPI_RECEIVED: the vcpu has just received a SIPI (vector
+ accesible via KVM_GET_VCPU_EVENTS)
+
+This ioctl is only useful after KVM_CREATE_IRQCHIP. Without an in-kernel
+irqchip, the multiprocessing state must be maintained by userspace.
+
+4.38 KVM_SET_MP_STATE
+
+Capability: KVM_CAP_MP_STATE
+Architectures: x86, ia64
+Type: vcpu ioctl
+Parameters: struct kvm_mp_state (in)
+Returns: 0 on success; -1 on error
+
+Sets the vcpu's current "multiprocessing state"; see KVM_GET_MP_STATE for
+arguments.
+
+This ioctl is only useful after KVM_CREATE_IRQCHIP. Without an in-kernel
+irqchip, the multiprocessing state must be maintained by userspace.
+
+4.39 KVM_SET_IDENTITY_MAP_ADDR
+
+Capability: KVM_CAP_SET_IDENTITY_MAP_ADDR
+Architectures: x86
+Type: vm ioctl
+Parameters: unsigned long identity (in)
+Returns: 0 on success, -1 on error
+
+This ioctl defines the physical address of a one-page region in the guest
+physical address space. The region must be within the first 4GB of the
+guest physical address space and must not conflict with any memory slot
+or any mmio address. The guest may malfunction if it accesses this memory
+region.
+
+This ioctl is required on Intel-based hosts. This is needed on Intel hardware
+because of a quirk in the virtualization implementation (see the internals
+documentation when it pops into existence).
+
+4.40 KVM_SET_BOOT_CPU_ID
+
+Capability: KVM_CAP_SET_BOOT_CPU_ID
+Architectures: x86, ia64
+Type: vm ioctl
+Parameters: unsigned long vcpu_id
+Returns: 0 on success, -1 on error
+
+Define which vcpu is the Bootstrap Processor (BSP). Values are the same
+as the vcpu id in KVM_CREATE_VCPU. If this ioctl is not called, the default
+is vcpu 0.
+
+4.41 KVM_GET_XSAVE
+
+Capability: KVM_CAP_XSAVE
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_xsave (out)
+Returns: 0 on success, -1 on error
+
+struct kvm_xsave {
+ __u32 region[1024];
+};
+
+This ioctl would copy current vcpu's xsave struct to the userspace.
+
+4.42 KVM_SET_XSAVE
+
+Capability: KVM_CAP_XSAVE
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_xsave (in)
+Returns: 0 on success, -1 on error
+
+struct kvm_xsave {
+ __u32 region[1024];
+};
+
+This ioctl would copy userspace's xsave struct to the kernel.
+
+4.43 KVM_GET_XCRS
+
+Capability: KVM_CAP_XCRS
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_xcrs (out)
+Returns: 0 on success, -1 on error
+
+struct kvm_xcr {
+ __u32 xcr;
+ __u32 reserved;
+ __u64 value;
+};
+
+struct kvm_xcrs {
+ __u32 nr_xcrs;
+ __u32 flags;
+ struct kvm_xcr xcrs[KVM_MAX_XCRS];
+ __u64 padding[16];
+};
+
+This ioctl would copy current vcpu's xcrs to the userspace.
+
+4.44 KVM_SET_XCRS
+
+Capability: KVM_CAP_XCRS
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_xcrs (in)
+Returns: 0 on success, -1 on error
+
+struct kvm_xcr {
+ __u32 xcr;
+ __u32 reserved;
+ __u64 value;
+};
+
+struct kvm_xcrs {
+ __u32 nr_xcrs;
+ __u32 flags;
+ struct kvm_xcr xcrs[KVM_MAX_XCRS];
+ __u64 padding[16];
+};
+
+This ioctl would set vcpu's xcr to the value userspace specified.
+
+4.45 KVM_GET_SUPPORTED_CPUID
+
+Capability: KVM_CAP_EXT_CPUID
+Architectures: x86
+Type: system ioctl
+Parameters: struct kvm_cpuid2 (in/out)
+Returns: 0 on success, -1 on error
+
+struct kvm_cpuid2 {
+ __u32 nent;
+ __u32 padding;
+ struct kvm_cpuid_entry2 entries[0];
+};
+
+#define KVM_CPUID_FLAG_SIGNIFCANT_INDEX 1
+#define KVM_CPUID_FLAG_STATEFUL_FUNC 2
+#define KVM_CPUID_FLAG_STATE_READ_NEXT 4
+
+struct kvm_cpuid_entry2 {
+ __u32 function;
+ __u32 index;
+ __u32 flags;
+ __u32 eax;
+ __u32 ebx;
+ __u32 ecx;
+ __u32 edx;
+ __u32 padding[3];
+};
+
+This ioctl returns x86 cpuid features which are supported by both the hardware
+and kvm. Userspace can use the information returned by this ioctl to
+construct cpuid information (for KVM_SET_CPUID2) that is consistent with
+hardware, kernel, and userspace capabilities, and with user requirements (for
+example, the user may wish to constrain cpuid to emulate older hardware,
+or for feature consistency across a cluster).
+
+Userspace invokes KVM_GET_SUPPORTED_CPUID by passing a kvm_cpuid2 structure
+with the 'nent' field indicating the number of entries in the variable-size
+array 'entries'. If the number of entries is too low to describe the cpu
+capabilities, an error (E2BIG) is returned. If the number is too high,
+the 'nent' field is adjusted and an error (ENOMEM) is returned. If the
+number is just right, the 'nent' field is adjusted to the number of valid
+entries in the 'entries' array, which is then filled.
+
+The entries returned are the host cpuid as returned by the cpuid instruction,
+with unknown or unsupported features masked out. The fields in each entry
+are defined as follows:
+
+ function: the eax value used to obtain the entry
+ index: the ecx value used to obtain the entry (for entries that are
+ affected by ecx)
+ flags: an OR of zero or more of the following:
+ KVM_CPUID_FLAG_SIGNIFCANT_INDEX:
+ if the index field is valid
+ KVM_CPUID_FLAG_STATEFUL_FUNC:
+ if cpuid for this function returns different values for successive
+ invocations; there will be several entries with the same function,
+ all with this flag set
+ KVM_CPUID_FLAG_STATE_READ_NEXT:
+ for KVM_CPUID_FLAG_STATEFUL_FUNC entries, set if this entry is
+ the first entry to be read by a cpu
+ eax, ebx, ecx, edx: the values returned by the cpuid instruction for
+ this function/index combination
5. The kvm_run structure
@@ -795,11 +1117,11 @@ Unused.
__u64 data_offset; /* relative to kvm_run start */
} io;
-If exit_reason is KVM_EXIT_IO_IN or KVM_EXIT_IO_OUT, then the vcpu has
+If exit_reason is KVM_EXIT_IO, then the vcpu has
executed a port I/O instruction which could not be satisfied by kvm.
data_offset describes where the data is located (KVM_EXIT_IO_OUT) or
where kvm expects application code to place the data for the next
-KVM_RUN invocation (KVM_EXIT_IO_IN). Data format is a patcked array.
+KVM_RUN invocation (KVM_EXIT_IO_IN). Data format is a packed array.
struct {
struct kvm_debug_exit_arch arch;
@@ -815,11 +1137,18 @@ Unused.
__u8 is_write;
} mmio;
-If exit_reason is KVM_EXIT_MMIO or KVM_EXIT_IO_OUT, then the vcpu has
+If exit_reason is KVM_EXIT_MMIO, then the vcpu has
executed a memory-mapped I/O instruction which could not be satisfied
by kvm. The 'data' member contains the written data if 'is_write' is
true, and should be filled by application code otherwise.
+NOTE: For KVM_EXIT_IO, KVM_EXIT_MMIO and KVM_EXIT_OSI, the corresponding
+operations are complete (and guest state is consistent) only after userspace
+has re-entered the kernel with KVM_RUN. The kernel side will first finish
+incomplete operations and then check for pending signals. Userspace
+can re-enter the guest with an unmasked signal pending to complete
+pending operations.
+
/* KVM_EXIT_HYPERCALL */
struct {
__u64 nr;
@@ -829,7 +1158,9 @@ true, and should be filled by application code otherwise.
__u32 pad;
} hypercall;
-Unused.
+Unused. This was once used for 'hypercall to userspace'. To implement
+such functionality, use KVM_EXIT_IO (x86) or KVM_EXIT_MMIO (all except s390).
+Note KVM_EXIT_IO is significantly faster than KVM_EXIT_MMIO.
/* KVM_EXIT_TPR_ACCESS */
struct {
@@ -870,6 +1201,19 @@ s390 specific.
powerpc specific.
+ /* KVM_EXIT_OSI */
+ struct {
+ __u64 gprs[32];
+ } osi;
+
+MOL uses a special hypercall interface it calls 'OSI'. To enable it, we catch
+hypercalls and exit with this exit struct that contains all the guest gprs.
+
+If exit_reason is KVM_EXIT_OSI, then the vcpu has triggered such a hypercall.
+Userspace can now handle the hypercall and when it's done modify the gprs as
+necessary. Upon guest entry all guest GPRs will then be replaced by the values
+in this struct.
+
/* Fix the size of the union. */
char padding[256];
};
diff --git a/Documentation/kvm/cpuid.txt b/Documentation/kvm/cpuid.txt
new file mode 100644
index 00000000000..14a12ea92b7
--- /dev/null
+++ b/Documentation/kvm/cpuid.txt
@@ -0,0 +1,42 @@
+KVM CPUID bits
+Glauber Costa <glommer@redhat.com>, Red Hat Inc, 2010
+=====================================================
+
+A guest running on a kvm host, can check some of its features using
+cpuid. This is not always guaranteed to work, since userspace can
+mask-out some, or even all KVM-related cpuid features before launching
+a guest.
+
+KVM cpuid functions are:
+
+function: KVM_CPUID_SIGNATURE (0x40000000)
+returns : eax = 0,
+ ebx = 0x4b4d564b,
+ ecx = 0x564b4d56,
+ edx = 0x4d.
+Note that this value in ebx, ecx and edx corresponds to the string "KVMKVMKVM".
+This function queries the presence of KVM cpuid leafs.
+
+
+function: define KVM_CPUID_FEATURES (0x40000001)
+returns : ebx, ecx, edx = 0
+ eax = and OR'ed group of (1 << flag), where each flags is:
+
+
+flag || value || meaning
+=============================================================================
+KVM_FEATURE_CLOCKSOURCE || 0 || kvmclock available at msrs
+ || || 0x11 and 0x12.
+------------------------------------------------------------------------------
+KVM_FEATURE_NOP_IO_DELAY || 1 || not necessary to perform delays
+ || || on PIO operations.
+------------------------------------------------------------------------------
+KVM_FEATURE_MMU_OP || 2 || deprecated.
+------------------------------------------------------------------------------
+KVM_FEATURE_CLOCKSOURCE2 || 3 || kvmclock available at msrs
+ || || 0x4b564d00 and 0x4b564d01
+------------------------------------------------------------------------------
+KVM_FEATURE_CLOCKSOURCE_STABLE_BIT || 24 || host will warn if no guest-side
+ || || per-cpu warps are expected in
+ || || kvmclock.
+------------------------------------------------------------------------------
diff --git a/Documentation/kvm/mmu.txt b/Documentation/kvm/mmu.txt
new file mode 100644
index 00000000000..142cc513665
--- /dev/null
+++ b/Documentation/kvm/mmu.txt
@@ -0,0 +1,348 @@
+The x86 kvm shadow mmu
+======================
+
+The mmu (in arch/x86/kvm, files mmu.[ch] and paging_tmpl.h) is responsible
+for presenting a standard x86 mmu to the guest, while translating guest
+physical addresses to host physical addresses.
+
+The mmu code attempts to satisfy the following requirements:
+
+- correctness: the guest should not be able to determine that it is running
+ on an emulated mmu except for timing (we attempt to comply
+ with the specification, not emulate the characteristics of
+ a particular implementation such as tlb size)
+- security: the guest must not be able to touch host memory not assigned
+ to it
+- performance: minimize the performance penalty imposed by the mmu
+- scaling: need to scale to large memory and large vcpu guests
+- hardware: support the full range of x86 virtualization hardware
+- integration: Linux memory management code must be in control of guest memory
+ so that swapping, page migration, page merging, transparent
+ hugepages, and similar features work without change
+- dirty tracking: report writes to guest memory to enable live migration
+ and framebuffer-based displays
+- footprint: keep the amount of pinned kernel memory low (most memory
+ should be shrinkable)
+- reliablity: avoid multipage or GFP_ATOMIC allocations
+
+Acronyms
+========
+
+pfn host page frame number
+hpa host physical address
+hva host virtual address
+gfn guest frame number
+gpa guest physical address
+gva guest virtual address
+ngpa nested guest physical address
+ngva nested guest virtual address
+pte page table entry (used also to refer generically to paging structure
+ entries)
+gpte guest pte (referring to gfns)
+spte shadow pte (referring to pfns)
+tdp two dimensional paging (vendor neutral term for NPT and EPT)
+
+Virtual and real hardware supported
+===================================
+
+The mmu supports first-generation mmu hardware, which allows an atomic switch
+of the current paging mode and cr3 during guest entry, as well as
+two-dimensional paging (AMD's NPT and Intel's EPT). The emulated hardware
+it exposes is the traditional 2/3/4 level x86 mmu, with support for global
+pages, pae, pse, pse36, cr0.wp, and 1GB pages. Work is in progress to support
+exposing NPT capable hardware on NPT capable hosts.
+
+Translation
+===========
+
+The primary job of the mmu is to program the processor's mmu to translate
+addresses for the guest. Different translations are required at different
+times:
+
+- when guest paging is disabled, we translate guest physical addresses to
+ host physical addresses (gpa->hpa)
+- when guest paging is enabled, we translate guest virtual addresses, to
+ guest physical addresses, to host physical addresses (gva->gpa->hpa)
+- when the guest launches a guest of its own, we translate nested guest
+ virtual addresses, to nested guest physical addresses, to guest physical
+ addresses, to host physical addresses (ngva->ngpa->gpa->hpa)
+
+The primary challenge is to encode between 1 and 3 translations into hardware
+that support only 1 (traditional) and 2 (tdp) translations. When the
+number of required translations matches the hardware, the mmu operates in
+direct mode; otherwise it operates in shadow mode (see below).
+
+Memory
+======
+
+Guest memory (gpa) is part of the user address space of the process that is
+using kvm. Userspace defines the translation between guest addresses and user
+addresses (gpa->hva); note that two gpas may alias to the same hva, but not
+vice versa.
+
+These hvas may be backed using any method available to the host: anonymous
+memory, file backed memory, and device memory. Memory might be paged by the
+host at any time.
+
+Events
+======
+
+The mmu is driven by events, some from the guest, some from the host.
+
+Guest generated events:
+- writes to control registers (especially cr3)
+- invlpg/invlpga instruction execution
+- access to missing or protected translations
+
+Host generated events:
+- changes in the gpa->hpa translation (either through gpa->hva changes or
+ through hva->hpa changes)
+- memory pressure (the shrinker)
+
+Shadow pages
+============
+
+The principal data structure is the shadow page, 'struct kvm_mmu_page'. A
+shadow page contains 512 sptes, which can be either leaf or nonleaf sptes. A
+shadow page may contain a mix of leaf and nonleaf sptes.
+
+A nonleaf spte allows the hardware mmu to reach the leaf pages and
+is not related to a translation directly. It points to other shadow pages.
+
+A leaf spte corresponds to either one or two translations encoded into
+one paging structure entry. These are always the lowest level of the
+translation stack, with optional higher level translations left to NPT/EPT.
+Leaf ptes point at guest pages.
+
+The following table shows translations encoded by leaf ptes, with higher-level
+translations in parentheses:
+
+ Non-nested guests:
+ nonpaging: gpa->hpa
+ paging: gva->gpa->hpa
+ paging, tdp: (gva->)gpa->hpa
+ Nested guests:
+ non-tdp: ngva->gpa->hpa (*)
+ tdp: (ngva->)ngpa->gpa->hpa
+
+(*) the guest hypervisor will encode the ngva->gpa translation into its page
+ tables if npt is not present
+
+Shadow pages contain the following information:
+ role.level:
+ The level in the shadow paging hierarchy that this shadow page belongs to.
+ 1=4k sptes, 2=2M sptes, 3=1G sptes, etc.
+ role.direct:
+ If set, leaf sptes reachable from this page are for a linear range.
+ Examples include real mode translation, large guest pages backed by small
+ host pages, and gpa->hpa translations when NPT or EPT is active.
+ The linear range starts at (gfn << PAGE_SHIFT) and its size is determined
+ by role.level (2MB for first level, 1GB for second level, 0.5TB for third
+ level, 256TB for fourth level)
+ If clear, this page corresponds to a guest page table denoted by the gfn
+ field.
+ role.quadrant:
+ When role.cr4_pae=0, the guest uses 32-bit gptes while the host uses 64-bit
+ sptes. That means a guest page table contains more ptes than the host,
+ so multiple shadow pages are needed to shadow one guest page.
+ For first-level shadow pages, role.quadrant can be 0 or 1 and denotes the
+ first or second 512-gpte block in the guest page table. For second-level
+ page tables, each 32-bit gpte is converted to two 64-bit sptes
+ (since each first-level guest page is shadowed by two first-level
+ shadow pages) so role.quadrant takes values in the range 0..3. Each
+ quadrant maps 1GB virtual address space.
+ role.access:
+ Inherited guest access permissions in the form uwx. Note execute
+ permission is positive, not negative.
+ role.invalid:
+ The page is invalid and should not be used. It is a root page that is
+ currently pinned (by a cpu hardware register pointing to it); once it is
+ unpinned it will be destroyed.
+ role.cr4_pae:
+ Contains the value of cr4.pae for which the page is valid (e.g. whether
+ 32-bit or 64-bit gptes are in use).
+ role.nxe:
+ Contains the value of efer.nxe for which the page is valid.
+ role.cr0_wp:
+ Contains the value of cr0.wp for which the page is valid.
+ gfn:
+ Either the guest page table containing the translations shadowed by this
+ page, or the base page frame for linear translations. See role.direct.
+ spt:
+ A pageful of 64-bit sptes containing the translations for this page.
+ Accessed by both kvm and hardware.
+ The page pointed to by spt will have its page->private pointing back
+ at the shadow page structure.
+ sptes in spt point either at guest pages, or at lower-level shadow pages.
+ Specifically, if sp1 and sp2 are shadow pages, then sp1->spt[n] may point
+ at __pa(sp2->spt). sp2 will point back at sp1 through parent_pte.
+ The spt array forms a DAG structure with the shadow page as a node, and
+ guest pages as leaves.
+ gfns:
+ An array of 512 guest frame numbers, one for each present pte. Used to
+ perform a reverse map from a pte to a gfn. When role.direct is set, any
+ element of this array can be calculated from the gfn field when used, in
+ this case, the array of gfns is not allocated. See role.direct and gfn.
+ slot_bitmap:
+ A bitmap containing one bit per memory slot. If the page contains a pte
+ mapping a page from memory slot n, then bit n of slot_bitmap will be set
+ (if a page is aliased among several slots, then it is not guaranteed that
+ all slots will be marked).
+ Used during dirty logging to avoid scanning a shadow page if none if its
+ pages need tracking.
+ root_count:
+ A counter keeping track of how many hardware registers (guest cr3 or
+ pdptrs) are now pointing at the page. While this counter is nonzero, the
+ page cannot be destroyed. See role.invalid.
+ multimapped:
+ Whether there exist multiple sptes pointing at this page.
+ parent_pte/parent_ptes:
+ If multimapped is zero, parent_pte points at the single spte that points at
+ this page's spt. Otherwise, parent_ptes points at a data structure
+ with a list of parent_ptes.
+ unsync:
+ If true, then the translations in this page may not match the guest's
+ translation. This is equivalent to the state of the tlb when a pte is
+ changed but before the tlb entry is flushed. Accordingly, unsync ptes
+ are synchronized when the guest executes invlpg or flushes its tlb by
+ other means. Valid for leaf pages.
+ unsync_children:
+ How many sptes in the page point at pages that are unsync (or have
+ unsynchronized children).
+ unsync_child_bitmap:
+ A bitmap indicating which sptes in spt point (directly or indirectly) at
+ pages that may be unsynchronized. Used to quickly locate all unsychronized
+ pages reachable from a given page.
+
+Reverse map
+===========
+
+The mmu maintains a reverse mapping whereby all ptes mapping a page can be
+reached given its gfn. This is used, for example, when swapping out a page.
+
+Synchronized and unsynchronized pages
+=====================================
+
+The guest uses two events to synchronize its tlb and page tables: tlb flushes
+and page invalidations (invlpg).
+
+A tlb flush means that we need to synchronize all sptes reachable from the
+guest's cr3. This is expensive, so we keep all guest page tables write
+protected, and synchronize sptes to gptes when a gpte is written.
+
+A special case is when a guest page table is reachable from the current
+guest cr3. In this case, the guest is obliged to issue an invlpg instruction
+before using the translation. We take advantage of that by removing write
+protection from the guest page, and allowing the guest to modify it freely.
+We synchronize modified gptes when the guest invokes invlpg. This reduces
+the amount of emulation we have to do when the guest modifies multiple gptes,
+or when the a guest page is no longer used as a page table and is used for
+random guest data.
+
+As a side effect we have to resynchronize all reachable unsynchronized shadow
+pages on a tlb flush.
+
+
+Reaction to events
+==================
+
+- guest page fault (or npt page fault, or ept violation)
+
+This is the most complicated event. The cause of a page fault can be:
+
+ - a true guest fault (the guest translation won't allow the access) (*)
+ - access to a missing translation
+ - access to a protected translation
+ - when logging dirty pages, memory is write protected
+ - synchronized shadow pages are write protected (*)
+ - access to untranslatable memory (mmio)
+
+ (*) not applicable in direct mode
+
+Handling a page fault is performed as follows:
+
+ - if needed, walk the guest page tables to determine the guest translation
+ (gva->gpa or ngpa->gpa)
+ - if permissions are insufficient, reflect the fault back to the guest
+ - determine the host page
+ - if this is an mmio request, there is no host page; call the emulator
+ to emulate the instruction instead
+ - walk the shadow page table to find the spte for the translation,
+ instantiating missing intermediate page tables as necessary
+ - try to unsynchronize the page
+ - if successful, we can let the guest continue and modify the gpte
+ - emulate the instruction
+ - if failed, unshadow the page and let the guest continue
+ - update any translations that were modified by the instruction
+
+invlpg handling:
+
+ - walk the shadow page hierarchy and drop affected translations
+ - try to reinstantiate the indicated translation in the hope that the
+ guest will use it in the near future
+
+Guest control register updates:
+
+- mov to cr3
+ - look up new shadow roots
+ - synchronize newly reachable shadow pages
+
+- mov to cr0/cr4/efer
+ - set up mmu context for new paging mode
+ - look up new shadow roots
+ - synchronize newly reachable shadow pages
+
+Host translation updates:
+
+ - mmu notifier called with updated hva
+ - look up affected sptes through reverse map
+ - drop (or update) translations
+
+Emulating cr0.wp
+================
+
+If tdp is not enabled, the host must keep cr0.wp=1 so page write protection
+works for the guest kernel, not guest guest userspace. When the guest
+cr0.wp=1, this does not present a problem. However when the guest cr0.wp=0,
+we cannot map the permissions for gpte.u=1, gpte.w=0 to any spte (the
+semantics require allowing any guest kernel access plus user read access).
+
+We handle this by mapping the permissions to two possible sptes, depending
+on fault type:
+
+- kernel write fault: spte.u=0, spte.w=1 (allows full kernel access,
+ disallows user access)
+- read fault: spte.u=1, spte.w=0 (allows full read access, disallows kernel
+ write access)
+
+(user write faults generate a #PF)
+
+Large pages
+===========
+
+The mmu supports all combinations of large and small guest and host pages.
+Supported page sizes include 4k, 2M, 4M, and 1G. 4M pages are treated as
+two separate 2M pages, on both guest and host, since the mmu always uses PAE
+paging.
+
+To instantiate a large spte, four constraints must be satisfied:
+
+- the spte must point to a large host page
+- the guest pte must be a large pte of at least equivalent size (if tdp is
+ enabled, there is no guest pte and this condition is satisified)
+- if the spte will be writeable, the large page frame may not overlap any
+ write-protected pages
+- the guest page must be wholly contained by a single memory slot
+
+To check the last two conditions, the mmu maintains a ->write_count set of
+arrays for each memory slot and large page size. Every write protected page
+causes its write_count to be incremented, thus preventing instantiation of
+a large spte. The frames at the end of an unaligned memory slot have
+artificically inflated ->write_counts so they can never be instantiated.
+
+Further reading
+===============
+
+- NPT presentation from KVM Forum 2008
+ http://www.linux-kvm.org/wiki/images/c/c8/KvmForum2008%24kdf2008_21.pdf
+
diff --git a/Documentation/kvm/msr.txt b/Documentation/kvm/msr.txt
new file mode 100644
index 00000000000..8ddcfe84c09
--- /dev/null
+++ b/Documentation/kvm/msr.txt
@@ -0,0 +1,153 @@
+KVM-specific MSRs.
+Glauber Costa <glommer@redhat.com>, Red Hat Inc, 2010
+=====================================================
+
+KVM makes use of some custom MSRs to service some requests.
+At present, this facility is only used by kvmclock.
+
+Custom MSRs have a range reserved for them, that goes from
+0x4b564d00 to 0x4b564dff. There are MSRs outside this area,
+but they are deprecated and their use is discouraged.
+
+Custom MSR list
+--------
+
+The current supported Custom MSR list is:
+
+MSR_KVM_WALL_CLOCK_NEW: 0x4b564d00
+
+ data: 4-byte alignment physical address of a memory area which must be
+ in guest RAM. This memory is expected to hold a copy of the following
+ structure:
+
+ struct pvclock_wall_clock {
+ u32 version;
+ u32 sec;
+ u32 nsec;
+ } __attribute__((__packed__));
+
+ whose data will be filled in by the hypervisor. The hypervisor is only
+ guaranteed to update this data at the moment of MSR write.
+ Users that want to reliably query this information more than once have
+ to write more than once to this MSR. Fields have the following meanings:
+
+ version: guest has to check version before and after grabbing
+ time information and check that they are both equal and even.
+ An odd version indicates an in-progress update.
+
+ sec: number of seconds for wallclock.
+
+ nsec: number of nanoseconds for wallclock.
+
+ Note that although MSRs are per-CPU entities, the effect of this
+ particular MSR is global.
+
+ Availability of this MSR must be checked via bit 3 in 0x4000001 cpuid
+ leaf prior to usage.
+
+MSR_KVM_SYSTEM_TIME_NEW: 0x4b564d01
+
+ data: 4-byte aligned physical address of a memory area which must be in
+ guest RAM, plus an enable bit in bit 0. This memory is expected to hold
+ a copy of the following structure:
+
+ struct pvclock_vcpu_time_info {
+ u32 version;
+ u32 pad0;
+ u64 tsc_timestamp;
+ u64 system_time;
+ u32 tsc_to_system_mul;
+ s8 tsc_shift;
+ u8 flags;
+ u8 pad[2];
+ } __attribute__((__packed__)); /* 32 bytes */
+
+ whose data will be filled in by the hypervisor periodically. Only one
+ write, or registration, is needed for each VCPU. The interval between
+ updates of this structure is arbitrary and implementation-dependent.
+ The hypervisor may update this structure at any time it sees fit until
+ anything with bit0 == 0 is written to it.
+
+ Fields have the following meanings:
+
+ version: guest has to check version before and after grabbing
+ time information and check that they are both equal and even.
+ An odd version indicates an in-progress update.
+
+ tsc_timestamp: the tsc value at the current VCPU at the time
+ of the update of this structure. Guests can subtract this value
+ from current tsc to derive a notion of elapsed time since the
+ structure update.
+
+ system_time: a host notion of monotonic time, including sleep
+ time at the time this structure was last updated. Unit is
+ nanoseconds.
+
+ tsc_to_system_mul: a function of the tsc frequency. One has
+ to multiply any tsc-related quantity by this value to get
+ a value in nanoseconds, besides dividing by 2^tsc_shift
+
+ tsc_shift: cycle to nanosecond divider, as a power of two, to
+ allow for shift rights. One has to shift right any tsc-related
+ quantity by this value to get a value in nanoseconds, besides
+ multiplying by tsc_to_system_mul.
+
+ With this information, guests can derive per-CPU time by
+ doing:
+
+ time = (current_tsc - tsc_timestamp)
+ time = (time * tsc_to_system_mul) >> tsc_shift
+ time = time + system_time
+
+ flags: bits in this field indicate extended capabilities
+ coordinated between the guest and the hypervisor. Availability
+ of specific flags has to be checked in 0x40000001 cpuid leaf.
+ Current flags are:
+
+ flag bit | cpuid bit | meaning
+ -------------------------------------------------------------
+ | | time measures taken across
+ 0 | 24 | multiple cpus are guaranteed to
+ | | be monotonic
+ -------------------------------------------------------------
+
+ Availability of this MSR must be checked via bit 3 in 0x4000001 cpuid
+ leaf prior to usage.
+
+
+MSR_KVM_WALL_CLOCK: 0x11
+
+ data and functioning: same as MSR_KVM_WALL_CLOCK_NEW. Use that instead.
+
+ This MSR falls outside the reserved KVM range and may be removed in the
+ future. Its usage is deprecated.
+
+ Availability of this MSR must be checked via bit 0 in 0x4000001 cpuid
+ leaf prior to usage.
+
+MSR_KVM_SYSTEM_TIME: 0x12
+
+ data and functioning: same as MSR_KVM_SYSTEM_TIME_NEW. Use that instead.
+
+ This MSR falls outside the reserved KVM range and may be removed in the
+ future. Its usage is deprecated.
+
+ Availability of this MSR must be checked via bit 0 in 0x4000001 cpuid
+ leaf prior to usage.
+
+ The suggested algorithm for detecting kvmclock presence is then:
+
+ if (!kvm_para_available()) /* refer to cpuid.txt */
+ return NON_PRESENT;
+
+ flags = cpuid_eax(0x40000001);
+ if (flags & 3) {
+ msr_kvm_system_time = MSR_KVM_SYSTEM_TIME_NEW;
+ msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK_NEW;
+ return PRESENT;
+ } else if (flags & 0) {
+ msr_kvm_system_time = MSR_KVM_SYSTEM_TIME;
+ msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK;
+ return PRESENT;
+ } else
+ return NON_PRESENT;
diff --git a/Documentation/kvm/review-checklist.txt b/Documentation/kvm/review-checklist.txt
new file mode 100644
index 00000000000..730475ae1b8
--- /dev/null
+++ b/Documentation/kvm/review-checklist.txt
@@ -0,0 +1,38 @@
+Review checklist for kvm patches
+================================
+
+1. The patch must follow Documentation/CodingStyle and
+ Documentation/SubmittingPatches.
+
+2. Patches should be against kvm.git master branch.
+
+3. If the patch introduces or modifies a new userspace API:
+ - the API must be documented in Documentation/kvm/api.txt
+ - the API must be discoverable using KVM_CHECK_EXTENSION
+
+4. New state must include support for save/restore.
+
+5. New features must default to off (userspace should explicitly request them).
+ Performance improvements can and should default to on.
+
+6. New cpu features should be exposed via KVM_GET_SUPPORTED_CPUID2
+
+7. Emulator changes should be accompanied by unit tests for qemu-kvm.git
+ kvm/test directory.
+
+8. Changes should be vendor neutral when possible. Changes to common code
+ are better than duplicating changes to vendor code.
+
+9. Similarly, prefer changes to arch independent code than to arch dependent
+ code.
+
+10. User/kernel interfaces and guest/host interfaces must be 64-bit clean
+ (all variables and sizes naturally aligned on 64-bit; use specific types
+ only - u64 rather than ulong).
+
+11. New guest visible features must either be documented in a hardware manual
+ or be accompanied by documentation.
+
+12. Features must be robust against reset and kexec - for example, shared
+ host/guest memory must be unshared to prevent the host from writing to
+ guest memory that the guest has not reserved for this purpose.
diff --git a/Documentation/laptops/00-INDEX b/Documentation/laptops/00-INDEX
index ee5692b26dd..fa688538e75 100644
--- a/Documentation/laptops/00-INDEX
+++ b/Documentation/laptops/00-INDEX
@@ -2,6 +2,12 @@
- This file
acer-wmi.txt
- information on the Acer Laptop WMI Extras driver.
+asus-laptop.txt
+ - information on the Asus Laptop Extras driver.
+disk-shock-protection.txt
+ - information on hard disk shock protection.
+dslm.c
+ - Simple Disk Sleep Monitor program
laptop-mode.txt
- how to conserve battery power using laptop-mode.
sony-laptop.txt
diff --git a/Documentation/laptops/Makefile b/Documentation/laptops/Makefile
new file mode 100644
index 00000000000..5cb144af3c0
--- /dev/null
+++ b/Documentation/laptops/Makefile
@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-y := dslm
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
diff --git a/Documentation/laptops/acer-wmi.txt b/Documentation/laptops/acer-wmi.txt
index 0768fcc3ba3..4beafa663dd 100644
--- a/Documentation/laptops/acer-wmi.txt
+++ b/Documentation/laptops/acer-wmi.txt
@@ -173,7 +173,7 @@ Credits
*******
Olaf Tauber, who did the real hard work when he developed acerhk
-http://www.informatik.hu-berlin.de/~tauber/acerhk
+http://www.cakey.de/acerhk/
All the authors of laptop ACPI modules in the kernel, whose work
was an inspiration in the early days of acer_acpi
Mathieu Segaud, who solved the problem with having to modprobe the driver
diff --git a/Documentation/laptops/dslm.c b/Documentation/laptops/dslm.c
new file mode 100644
index 00000000000..72ff290c5fc
--- /dev/null
+++ b/Documentation/laptops/dslm.c
@@ -0,0 +1,166 @@
+/*
+ * dslm.c
+ * Simple Disk Sleep Monitor
+ * by Bartek Kania
+ * Licenced under the GPL
+ */
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <time.h>
+#include <string.h>
+#include <signal.h>
+#include <sys/ioctl.h>
+#include <linux/hdreg.h>
+
+#ifdef DEBUG
+#define D(x) x
+#else
+#define D(x)
+#endif
+
+int endit = 0;
+
+/* Check if the disk is in powersave-mode
+ * Most of the code is stolen from hdparm.
+ * 1 = active, 0 = standby/sleep, -1 = unknown */
+static int check_powermode(int fd)
+{
+ unsigned char args[4] = {WIN_CHECKPOWERMODE1,0,0,0};
+ int state;
+
+ if (ioctl(fd, HDIO_DRIVE_CMD, &args)
+ && (args[0] = WIN_CHECKPOWERMODE2) /* try again with 0x98 */
+ && ioctl(fd, HDIO_DRIVE_CMD, &args)) {
+ if (errno != EIO || args[0] != 0 || args[1] != 0) {
+ state = -1; /* "unknown"; */
+ } else
+ state = 0; /* "sleeping"; */
+ } else {
+ state = (args[2] == 255) ? 1 : 0;
+ }
+ D(printf(" drive state is: %d\n", state));
+
+ return state;
+}
+
+static char *state_name(int i)
+{
+ if (i == -1) return "unknown";
+ if (i == 0) return "sleeping";
+ if (i == 1) return "active";
+
+ return "internal error";
+}
+
+static char *myctime(time_t time)
+{
+ char *ts = ctime(&time);
+ ts[strlen(ts) - 1] = 0;
+
+ return ts;
+}
+
+static void measure(int fd)
+{
+ time_t start_time;
+ int last_state;
+ time_t last_time;
+ int curr_state;
+ time_t curr_time = 0;
+ time_t time_diff;
+ time_t active_time = 0;
+ time_t sleep_time = 0;
+ time_t unknown_time = 0;
+ time_t total_time = 0;
+ int changes = 0;
+ float tmp;
+
+ printf("Starting measurements\n");
+
+ last_state = check_powermode(fd);
+ start_time = last_time = time(0);
+ printf(" System is in state %s\n\n", state_name(last_state));
+
+ while(!endit) {
+ sleep(1);
+ curr_state = check_powermode(fd);
+
+ if (curr_state != last_state || endit) {
+ changes++;
+ curr_time = time(0);
+ time_diff = curr_time - last_time;
+
+ if (last_state == 1) active_time += time_diff;
+ else if (last_state == 0) sleep_time += time_diff;
+ else unknown_time += time_diff;
+
+ last_state = curr_state;
+ last_time = curr_time;
+
+ printf("%s: State-change to %s\n", myctime(curr_time),
+ state_name(curr_state));
+ }
+ }
+ changes--; /* Compensate for SIGINT */
+
+ total_time = time(0) - start_time;
+ printf("\nTotal running time: %lus\n", curr_time - start_time);
+ printf(" State changed %d times\n", changes);
+
+ tmp = (float)sleep_time / (float)total_time * 100;
+ printf(" Time in sleep state: %lus (%.2f%%)\n", sleep_time, tmp);
+ tmp = (float)active_time / (float)total_time * 100;
+ printf(" Time in active state: %lus (%.2f%%)\n", active_time, tmp);
+ tmp = (float)unknown_time / (float)total_time * 100;
+ printf(" Time in unknown state: %lus (%.2f%%)\n", unknown_time, tmp);
+}
+
+static void ender(int s)
+{
+ endit = 1;
+}
+
+static void usage(void)
+{
+ puts("usage: dslm [-w <time>] <disk>");
+ exit(0);
+}
+
+int main(int argc, char **argv)
+{
+ int fd;
+ char *disk = 0;
+ int settle_time = 60;
+
+ /* Parse the simple command-line */
+ if (argc == 2)
+ disk = argv[1];
+ else if (argc == 4) {
+ settle_time = atoi(argv[2]);
+ disk = argv[3];
+ } else
+ usage();
+
+ if (!(fd = open(disk, O_RDONLY|O_NONBLOCK))) {
+ printf("Can't open %s, because: %s\n", disk, strerror(errno));
+ exit(-1);
+ }
+
+ if (settle_time) {
+ printf("Waiting %d seconds for the system to settle down to "
+ "'normal'\n", settle_time);
+ sleep(settle_time);
+ } else
+ puts("Not waiting for system to settle down");
+
+ signal(SIGINT, ender);
+
+ measure(fd);
+
+ close(fd);
+
+ return 0;
+}
diff --git a/Documentation/laptops/laptop-mode.txt b/Documentation/laptops/laptop-mode.txt
index eeedee11c8c..0bf25eebce9 100644
--- a/Documentation/laptops/laptop-mode.txt
+++ b/Documentation/laptops/laptop-mode.txt
@@ -207,7 +207,7 @@ Tips & Tricks
* Drew Scott Daniels observed: "I don't know why, but when I decrease the number
of colours that my display uses it consumes less battery power. I've seen
this on powerbooks too. I hope that this is a piece of information that
- might be useful to the Laptop Mode patch or it's users."
+ might be useful to the Laptop Mode patch or its users."
* In syslog.conf, you can prefix entries with a dash ``-'' to omit syncing the
file after every logging. When you're using laptop-mode and your disk doesn't
@@ -779,172 +779,4 @@ Monitoring tool
---------------
Bartek Kania submitted this, it can be used to measure how much time your disk
-spends spun up/down.
-
----------------------------dslm.c BEGIN-----------------------------------------
-/*
- * Simple Disk Sleep Monitor
- * by Bartek Kania
- * Licenced under the GPL
- */
-#include <unistd.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <time.h>
-#include <string.h>
-#include <signal.h>
-#include <sys/ioctl.h>
-#include <linux/hdreg.h>
-
-#ifdef DEBUG
-#define D(x) x
-#else
-#define D(x)
-#endif
-
-int endit = 0;
-
-/* Check if the disk is in powersave-mode
- * Most of the code is stolen from hdparm.
- * 1 = active, 0 = standby/sleep, -1 = unknown */
-int check_powermode(int fd)
-{
- unsigned char args[4] = {WIN_CHECKPOWERMODE1,0,0,0};
- int state;
-
- if (ioctl(fd, HDIO_DRIVE_CMD, &args)
- && (args[0] = WIN_CHECKPOWERMODE2) /* try again with 0x98 */
- && ioctl(fd, HDIO_DRIVE_CMD, &args)) {
- if (errno != EIO || args[0] != 0 || args[1] != 0) {
- state = -1; /* "unknown"; */
- } else
- state = 0; /* "sleeping"; */
- } else {
- state = (args[2] == 255) ? 1 : 0;
- }
- D(printf(" drive state is: %d\n", state));
-
- return state;
-}
-
-char *state_name(int i)
-{
- if (i == -1) return "unknown";
- if (i == 0) return "sleeping";
- if (i == 1) return "active";
-
- return "internal error";
-}
-
-char *myctime(time_t time)
-{
- char *ts = ctime(&time);
- ts[strlen(ts) - 1] = 0;
-
- return ts;
-}
-
-void measure(int fd)
-{
- time_t start_time;
- int last_state;
- time_t last_time;
- int curr_state;
- time_t curr_time = 0;
- time_t time_diff;
- time_t active_time = 0;
- time_t sleep_time = 0;
- time_t unknown_time = 0;
- time_t total_time = 0;
- int changes = 0;
- float tmp;
-
- printf("Starting measurements\n");
-
- last_state = check_powermode(fd);
- start_time = last_time = time(0);
- printf(" System is in state %s\n\n", state_name(last_state));
-
- while(!endit) {
- sleep(1);
- curr_state = check_powermode(fd);
-
- if (curr_state != last_state || endit) {
- changes++;
- curr_time = time(0);
- time_diff = curr_time - last_time;
-
- if (last_state == 1) active_time += time_diff;
- else if (last_state == 0) sleep_time += time_diff;
- else unknown_time += time_diff;
-
- last_state = curr_state;
- last_time = curr_time;
-
- printf("%s: State-change to %s\n", myctime(curr_time),
- state_name(curr_state));
- }
- }
- changes--; /* Compensate for SIGINT */
-
- total_time = time(0) - start_time;
- printf("\nTotal running time: %lus\n", curr_time - start_time);
- printf(" State changed %d times\n", changes);
-
- tmp = (float)sleep_time / (float)total_time * 100;
- printf(" Time in sleep state: %lus (%.2f%%)\n", sleep_time, tmp);
- tmp = (float)active_time / (float)total_time * 100;
- printf(" Time in active state: %lus (%.2f%%)\n", active_time, tmp);
- tmp = (float)unknown_time / (float)total_time * 100;
- printf(" Time in unknown state: %lus (%.2f%%)\n", unknown_time, tmp);
-}
-
-void ender(int s)
-{
- endit = 1;
-}
-
-void usage()
-{
- puts("usage: dslm [-w <time>] <disk>");
- exit(0);
-}
-
-int main(int argc, char **argv)
-{
- int fd;
- char *disk = 0;
- int settle_time = 60;
-
- /* Parse the simple command-line */
- if (argc == 2)
- disk = argv[1];
- else if (argc == 4) {
- settle_time = atoi(argv[2]);
- disk = argv[3];
- } else
- usage();
-
- if (!(fd = open(disk, O_RDONLY|O_NONBLOCK))) {
- printf("Can't open %s, because: %s\n", disk, strerror(errno));
- exit(-1);
- }
-
- if (settle_time) {
- printf("Waiting %d seconds for the system to settle down to "
- "'normal'\n", settle_time);
- sleep(settle_time);
- } else
- puts("Not waiting for system to settle down");
-
- signal(SIGINT, ender);
-
- measure(fd);
-
- close(fd);
-
- return 0;
-}
----------------------------dslm.c END-------------------------------------------
+spends spun up/down. See Documentation/laptops/dslm.c
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 75afa1229fd..1565eefd6fd 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -292,13 +292,13 @@ sysfs notes:
Warning: when in NVRAM mode, the volume up/down/mute
keys are synthesized according to changes in the mixer,
- so you have to use volume up or volume down to unmute,
- as per the ThinkPad volume mixer user interface. When
- in ACPI event mode, volume up/down/mute are reported as
- separate events, but this behaviour may be corrected in
- future releases of this driver, in which case the
- ThinkPad volume mixer user interface semantics will be
- enforced.
+ which uses a single volume up or volume down hotkey
+ press to unmute, as per the ThinkPad volume mixer user
+ interface. When in ACPI event mode, volume up/down/mute
+ events are reported by the firmware and can behave
+ differently (and that behaviour changes with firmware
+ version -- not just with firmware models -- as well as
+ OSI(Linux) state).
hotkey_poll_freq:
frequency in Hz for hot key polling. It must be between
@@ -309,7 +309,7 @@ sysfs notes:
will cause hot key presses that require NVRAM polling
to never be reported.
- Setting hotkey_poll_freq too low will cause repeated
+ Setting hotkey_poll_freq too low may cause repeated
pressings of the same hot key to be misreported as a
single key press, or to not even be detected at all.
The recommended polling frequency is 10Hz.
@@ -397,6 +397,7 @@ ACPI Scan
event code Key Notes
0x1001 0x00 FN+F1 -
+
0x1002 0x01 FN+F2 IBM: battery (rare)
Lenovo: Screen lock
@@ -404,7 +405,8 @@ event code Key Notes
this hot key, even with hot keys
disabled or with Fn+F3 masked
off
- IBM: screen lock
+ IBM: screen lock, often turns
+ off the ThinkLight as side-effect
Lenovo: battery
0x1004 0x03 FN+F4 Sleep button (ACPI sleep button
@@ -433,7 +435,8 @@ event code Key Notes
Do you feel lucky today?
0x1008 0x07 FN+F8 IBM: toggle screen expand
- Lenovo: configure UltraNav
+ Lenovo: configure UltraNav,
+ or toggle screen expand
0x1009 0x08 FN+F9 -
.. .. ..
@@ -444,7 +447,7 @@ event code Key Notes
either through the ACPI event,
or through a hotkey event.
The firmware may refuse to
- generate further FN+F4 key
+ generate further FN+F12 key
press events until a S3 or S4
ACPI sleep cycle is performed,
or some time passes.
@@ -512,15 +515,19 @@ events for switches:
SW_RFKILL_ALL T60 and later hardware rfkill rocker switch
SW_TABLET_MODE Tablet ThinkPads HKEY events 0x5009 and 0x500A
-Non hot-key ACPI HKEY event map:
+Non hotkey ACPI HKEY event map:
+-------------------------------
+
+Events that are not propagated by the driver, except for legacy
+compatibility purposes when hotkey_report_mode is set to 1:
+
0x5001 Lid closed
0x5002 Lid opened
0x5009 Tablet swivel: switched to tablet mode
0x500A Tablet swivel: switched to normal mode
0x7000 Radio Switch may have changed state
-The above events are not propagated by the driver, except for legacy
-compatibility purposes when hotkey_report_mode is set to 1.
+Events that are never propagated by the driver:
0x2304 System is waking up from suspend to undock
0x2305 System is waking up from suspend to eject bay
@@ -528,14 +535,39 @@ compatibility purposes when hotkey_report_mode is set to 1.
0x2405 System is waking up from hibernation to eject bay
0x5010 Brightness level changed/control event
-The above events are never propagated by the driver.
+Events that are propagated by the driver to userspace:
+0x2313 ALARM: System is waking up from suspend because
+ the battery is nearly empty
+0x2413 ALARM: System is waking up from hibernation because
+ the battery is nearly empty
0x3003 Bay ejection (see 0x2x05) complete, can sleep again
+0x3006 Bay hotplug request (hint to power up SATA link when
+ the optical drive tray is ejected)
0x4003 Undocked (see 0x2x04), can sleep again
0x500B Tablet pen inserted into its storage bay
0x500C Tablet pen removed from its storage bay
-
-The above events are propagated by the driver.
+0x6011 ALARM: battery is too hot
+0x6012 ALARM: battery is extremely hot
+0x6021 ALARM: a sensor is too hot
+0x6022 ALARM: a sensor is extremely hot
+0x6030 System thermal table changed
+
+Battery nearly empty alarms are a last resort attempt to get the
+operating system to hibernate or shutdown cleanly (0x2313), or shutdown
+cleanly (0x2413) before power is lost. They must be acted upon, as the
+wake up caused by the firmware will have negated most safety nets...
+
+When any of the "too hot" alarms happen, according to Lenovo the user
+should suspend or hibernate the laptop (and in the case of battery
+alarms, unplug the AC adapter) to let it cool down. These alarms do
+signal that something is wrong, they should never happen on normal
+operating conditions.
+
+The "extremely hot" alarms are emergencies. According to Lenovo, the
+operating system is to force either an immediate suspend or hibernate
+cycle, or a system shutdown. Obviously, something is very wrong if this
+happens.
Compatibility notes:
@@ -650,6 +682,10 @@ LCD, CRT or DVI (if available). The following commands are available:
echo expand_toggle > /proc/acpi/ibm/video
echo video_switch > /proc/acpi/ibm/video
+NOTE: Access to this feature is restricted to processes owning the
+CAP_SYS_ADMIN capability for safety reasons, as it can interact badly
+enough with some versions of X.org to crash it.
+
Each video output device can be enabled or disabled individually.
Reading /proc/acpi/ibm/video shows the status of each device.
@@ -924,70 +960,21 @@ Sysfs notes:
subsystem, and follow all of the hwmon guidelines at
Documentation/hwmon.
+EXPERIMENTAL: Embedded controller register dump
+-----------------------------------------------
-EXPERIMENTAL: Embedded controller register dump -- /proc/acpi/ibm/ecdump
-------------------------------------------------------------------------
-
-This feature is marked EXPERIMENTAL because the implementation
-directly accesses hardware registers and may not work as expected. USE
-WITH CAUTION! To use this feature, you need to supply the
-experimental=1 parameter when loading the module.
-
-This feature dumps the values of 256 embedded controller
-registers. Values which have changed since the last time the registers
-were dumped are marked with a star:
-
-[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump
-EC +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f
-EC 0x00: a7 47 87 01 fe 96 00 08 01 00 cb 00 00 00 40 00
-EC 0x10: 00 00 ff ff f4 3c 87 09 01 ff 42 01 ff ff 0d 00
-EC 0x20: 00 00 00 00 00 00 00 00 00 00 00 03 43 00 00 80
-EC 0x30: 01 07 1a 00 30 04 00 00 *85 00 00 10 00 50 00 00
-EC 0x40: 00 00 00 00 00 00 14 01 00 04 00 00 00 00 00 00
-EC 0x50: 00 c0 02 0d 00 01 01 02 02 03 03 03 03 *bc *02 *bc
-EC 0x60: *02 *bc *02 00 00 00 00 00 00 00 00 00 00 00 00 00
-EC 0x70: 00 00 00 00 00 12 30 40 *24 *26 *2c *27 *20 80 *1f 80
-EC 0x80: 00 00 00 06 *37 *0e 03 00 00 00 0e 07 00 00 00 00
-EC 0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-EC 0xa0: *ff 09 ff 09 ff ff *64 00 *00 *00 *a2 41 *ff *ff *e0 00
-EC 0xb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-EC 0xc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-EC 0xd0: 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-EC 0xe0: 00 00 00 00 00 00 00 00 11 20 49 04 24 06 55 03
-EC 0xf0: 31 55 48 54 35 38 57 57 08 2f 45 73 07 65 6c 1a
-
-This feature can be used to determine the register holding the fan
-speed on some models. To do that, do the following:
+This feature is not included in the thinkpad driver anymore.
+Instead the EC can be accessed through /sys/kernel/debug/ec with
+a userspace tool which can be found here:
+ftp://ftp.suse.com/pub/people/trenn/sources/ec
+Use it to determine the register holding the fan
+speed on some models. To do that, do the following:
- make sure the battery is fully charged
- make sure the fan is running
- - run 'cat /proc/acpi/ibm/ecdump' several times, once per second or so
-
-The first step makes sure various charging-related values don't
-vary. The second ensures that the fan-related values do vary, since
-the fan speed fluctuates a bit. The third will (hopefully) mark the
-fan register with a star:
-
-[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump
-EC +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f
-EC 0x00: a7 47 87 01 fe 96 00 08 01 00 cb 00 00 00 40 00
-EC 0x10: 00 00 ff ff f4 3c 87 09 01 ff 42 01 ff ff 0d 00
-EC 0x20: 00 00 00 00 00 00 00 00 00 00 00 03 43 00 00 80
-EC 0x30: 01 07 1a 00 30 04 00 00 85 00 00 10 00 50 00 00
-EC 0x40: 00 00 00 00 00 00 14 01 00 04 00 00 00 00 00 00
-EC 0x50: 00 c0 02 0d 00 01 01 02 02 03 03 03 03 bc 02 bc
-EC 0x60: 02 bc 02 00 00 00 00 00 00 00 00 00 00 00 00 00
-EC 0x70: 00 00 00 00 00 12 30 40 24 27 2c 27 21 80 1f 80
-EC 0x80: 00 00 00 06 *be 0d 03 00 00 00 0e 07 00 00 00 00
-EC 0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-EC 0xa0: ff 09 ff 09 ff ff 64 00 00 00 a2 41 ff ff e0 00
-EC 0xb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-EC 0xc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-EC 0xd0: 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
-EC 0xe0: 00 00 00 00 00 00 00 00 11 20 49 04 24 06 55 03
-EC 0xf0: 31 55 48 54 35 38 57 57 08 2f 45 73 07 65 6c 1a
-
-Another set of values that varies often is the temperature
+ - use above mentioned tool to read out the EC
+
+Often fan and temperature values vary between
readings. Since temperatures don't change vary fast, you can take
several quick dumps to eliminate them.
@@ -1037,6 +1024,10 @@ ThinkPad-specific interface. The driver will disable its native
backlight brightness control interface if it detects that the standard
ACPI interface is available in the ThinkPad.
+If you want to use the thinkpad-acpi backlight brightness control
+instead of the generic ACPI video backlight brightness control for some
+reason, you should use the acpi_backlight=vendor kernel parameter.
+
The brightness_enable module parameter can be used to control whether
the LCD brightness control feature will be enabled when available.
brightness_enable=0 forces it to be disabled. brightness_enable=1
diff --git a/Documentation/ldm.txt b/Documentation/ldm.txt
index 718085bc9f1..4f80edd14d0 100644
--- a/Documentation/ldm.txt
+++ b/Documentation/ldm.txt
@@ -98,7 +98,7 @@ More Documentation
There is an Overview of the LDM together with complete Technical Documentation.
It is available for download.
- http://www.linux-ntfs.org/content/view/19/37/
+ http://www.linux-ntfs.org/
If you have any LDM questions that aren't answered in the documentation, email
me.
diff --git a/Documentation/lguest/Makefile b/Documentation/lguest/Makefile
index 28c8cdfcafd..bebac6b4f33 100644
--- a/Documentation/lguest/Makefile
+++ b/Documentation/lguest/Makefile
@@ -1,5 +1,6 @@
# This creates the demonstration utility "lguest" which runs a Linux guest.
-CFLAGS:=-m32 -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include -I../../arch/x86/include -U_FORTIFY_SOURCE
+# Missing headers? Add "-I../../include -I../../arch/x86/include"
+CFLAGS:=-m32 -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -U_FORTIFY_SOURCE
all: lguest
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 42208511b5c..8a6a8c6d498 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -34,20 +34,19 @@
#include <sys/uio.h>
#include <termios.h>
#include <getopt.h>
-#include <zlib.h>
#include <assert.h>
#include <sched.h>
#include <limits.h>
#include <stddef.h>
#include <signal.h>
-#include "linux/lguest_launcher.h"
-#include "linux/virtio_config.h"
-#include "linux/virtio_net.h"
-#include "linux/virtio_blk.h"
-#include "linux/virtio_console.h"
-#include "linux/virtio_rng.h"
-#include "linux/virtio_ring.h"
-#include "asm/bootparam.h"
+#include <linux/virtio_config.h>
+#include <linux/virtio_net.h>
+#include <linux/virtio_blk.h>
+#include <linux/virtio_console.h>
+#include <linux/virtio_rng.h>
+#include <linux/virtio_ring.h>
+#include <asm/bootparam.h>
+#include "../../include/linux/lguest_launcher.h"
/*L:110
* We can ignore the 42 include files we need for this program, but I do want
* to draw attention to the use of kernel-style types.
@@ -264,7 +263,7 @@ static u8 *get_feature_bits(struct device *dev)
* Launcher virtual with an offset.
*
* This can be tough to get your head around, but usually it just means that we
- * use these trivial conversion functions when the Guest gives us it's
+ * use these trivial conversion functions when the Guest gives us its
* "physical" addresses:
*/
static void *from_guest_phys(unsigned long addr)
@@ -1448,14 +1447,15 @@ static void add_to_bridge(int fd, const char *if_name, const char *br_name)
static void configure_device(int fd, const char *tapif, u32 ipaddr)
{
struct ifreq ifr;
- struct sockaddr_in *sin = (struct sockaddr_in *)&ifr.ifr_addr;
+ struct sockaddr_in sin;
memset(&ifr, 0, sizeof(ifr));
strcpy(ifr.ifr_name, tapif);
/* Don't read these incantations. Just cut & paste them like I did! */
- sin->sin_family = AF_INET;
- sin->sin_addr.s_addr = htonl(ipaddr);
+ sin.sin_family = AF_INET;
+ sin.sin_addr.s_addr = htonl(ipaddr);
+ memcpy(&ifr.ifr_addr, &sin, sizeof(sin));
if (ioctl(fd, SIOCSIFADDR, &ifr) != 0)
err(1, "Setting %s interface address", tapif);
ifr.ifr_flags = IFF_UP;
diff --git a/Documentation/md.txt b/Documentation/md.txt
index 188f4768f1d..a81c7b4790f 100644
--- a/Documentation/md.txt
+++ b/Documentation/md.txt
@@ -1,5 +1,5 @@
Tools that manage md devices can be found at
- http://www.<country>.kernel.org/pub/linux/utils/raid/....
+ http://www.kernel.org/pub/linux/utils/raid/
Boot time assembly of RAID arrays
@@ -136,7 +136,7 @@ raid_disks != 0.
Then uninitialized devices can be added with ADD_NEW_DISK. The
structure passed to ADD_NEW_DISK must specify the state of the device
-and it's role in the array.
+and its role in the array.
Once started with RUN_ARRAY, uninitialized spares can be added with
HOT_ADD_DISK.
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index 7f5809eddee..631ad2f1b22 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -3,6 +3,7 @@
============================
By: David Howells <dhowells@redhat.com>
+ Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Contents:
@@ -60,6 +61,10 @@ Contents:
- And then there's the Alpha.
+ (*) Example uses.
+
+ - Circular buffers.
+
(*) References.
@@ -2226,6 +2231,21 @@ The Alpha defines the Linux kernel's memory barrier model.
See the subsection on "Cache Coherency" above.
+============
+EXAMPLE USES
+============
+
+CIRCULAR BUFFERS
+----------------
+
+Memory barriers can be used to implement circular buffering without the need
+of a lock to serialise the producer with the consumer. See:
+
+ Documentation/circular-buffers.txt
+
+for details.
+
+
==========
REFERENCES
==========
diff --git a/Documentation/misc-devices/c2port.txt b/Documentation/misc-devices/c2port.txt
index d9bf93ea439..ea734446561 100644
--- a/Documentation/misc-devices/c2port.txt
+++ b/Documentation/misc-devices/c2port.txt
@@ -32,10 +32,10 @@ The C2 Interface main references are at (http://www.silabs.com)
Silicon Laboratories site], see:
- AN127: FLASH Programming via the C2 Interface at
-http://www.silabs.com/public/documents/tpub_doc/anote/Microcontrollers/Small_Form_Factor/en/an127.pdf, and
+http://www.silabs.com/Support Documents/TechnicalDocs/an127.pdf
- C2 Specification at
-http://www.silabs.com/public/documents/tpub_doc/spec/Microcontrollers/en/C2spec.pdf,
+http://www.silabs.com/pages/DownloadDoc.aspx?FILEURL=Support%20Documents/TechnicalDocs/an127.pdf&src=SearchResults
however it implements a two wire serial communication protocol (bit
banging) designed to enable in-system programming, debugging, and
diff --git a/Documentation/mmc/00-INDEX b/Documentation/mmc/00-INDEX
new file mode 100644
index 00000000000..fca586f5b85
--- /dev/null
+++ b/Documentation/mmc/00-INDEX
@@ -0,0 +1,4 @@
+00-INDEX
+ - this file
+mmc-dev-attrs.txt
+ - info on SD and MMC device attributes
diff --git a/Documentation/mmc/mmc-dev-attrs.txt b/Documentation/mmc/mmc-dev-attrs.txt
new file mode 100644
index 00000000000..ff2bd685bce
--- /dev/null
+++ b/Documentation/mmc/mmc-dev-attrs.txt
@@ -0,0 +1,56 @@
+SD and MMC Device Attributes
+============================
+
+All attributes are read-only.
+
+ cid Card Identifaction Register
+ csd Card Specific Data Register
+ scr SD Card Configuration Register (SD only)
+ date Manufacturing Date (from CID Register)
+ fwrev Firmware/Product Revision (from CID Register) (SD and MMCv1 only)
+ hwrev Hardware/Product Revision (from CID Register) (SD and MMCv1 only)
+ manfid Manufacturer ID (from CID Register)
+ name Product Name (from CID Register)
+ oemid OEM/Application ID (from CID Register)
+ serial Product Serial Number (from CID Register)
+ erase_size Erase group size
+ preferred_erase_size Preferred erase size
+
+Note on Erase Size and Preferred Erase Size:
+
+ "erase_size" is the minimum size, in bytes, of an erase
+ operation. For MMC, "erase_size" is the erase group size
+ reported by the card. Note that "erase_size" does not apply
+ to trim or secure trim operations where the minimum size is
+ always one 512 byte sector. For SD, "erase_size" is 512
+ if the card is block-addressed, 0 otherwise.
+
+ SD/MMC cards can erase an arbitrarily large area up to and
+ including the whole card. When erasing a large area it may
+ be desirable to do it in smaller chunks for three reasons:
+ 1. A single erase command will make all other I/O on
+ the card wait. This is not a problem if the whole card
+ is being erased, but erasing one partition will make
+ I/O for another partition on the same card wait for the
+ duration of the erase - which could be a several
+ minutes.
+ 2. To be able to inform the user of erase progress.
+ 3. The erase timeout becomes too large to be very
+ useful. Because the erase timeout contains a margin
+ which is multiplied by the size of the erase area,
+ the value can end up being several minutes for large
+ areas.
+
+ "erase_size" is not the most efficient unit to erase
+ (especially for SD where it is just one sector),
+ hence "preferred_erase_size" provides a good chunk
+ size for erasing large areas.
+
+ For MMC, "preferred_erase_size" is the high-capacity
+ erase size if a card specifies one, otherwise it is
+ based on the capacity of the card.
+
+ For SD, "preferred_erase_size" is the allocation unit
+ size specified by the card.
+
+ "preferred_erase_size" is in bytes.
diff --git a/Documentation/mtd/nand_ecc.txt b/Documentation/mtd/nand_ecc.txt
index 274821b35a7..990efd7a981 100644
--- a/Documentation/mtd/nand_ecc.txt
+++ b/Documentation/mtd/nand_ecc.txt
@@ -91,7 +91,7 @@ ECC 1 rp15 rp14 rp13 rp12 rp11 rp10 rp09 rp08
ECC 2 cp5 cp4 cp3 cp2 cp1 cp0 1 1
I detected after writing this that ST application note AN1823
-(http://www.st.com/stonline/books/pdf/docs/10123.pdf) gives a much
+(http://www.st.com/stonline/) gives a much
nicer picture.(but they use line parity as term where I use row parity)
Oh well, I'm graphically challenged, so suffer with me for a moment :-)
And I could not reuse the ST picture anyway for copyright reasons.
diff --git a/Documentation/mutex-design.txt b/Documentation/mutex-design.txt
index c91ccc0720f..38c10fd7f41 100644
--- a/Documentation/mutex-design.txt
+++ b/Documentation/mutex-design.txt
@@ -9,7 +9,7 @@ firstly, there's nothing wrong with semaphores. But if the simpler
mutex semantics are sufficient for your code, then there are a couple
of advantages of mutexes:
- - 'struct mutex' is smaller on most architectures: .e.g on x86,
+ - 'struct mutex' is smaller on most architectures: E.g. on x86,
'struct semaphore' is 20 bytes, 'struct mutex' is 16 bytes.
A smaller structure size means less RAM footprint, and better
CPU-cache utilization.
@@ -136,3 +136,4 @@ the APIs of 'struct mutex' have been streamlined:
void mutex_lock_nested(struct mutex *lock, unsigned int subclass);
int mutex_lock_interruptible_nested(struct mutex *lock,
unsigned int subclass);
+ int atomic_dec_and_mutex_lock(atomic_t *cnt, struct mutex *lock);
diff --git a/Documentation/netlabel/lsm_interface.txt b/Documentation/netlabel/lsm_interface.txt
index 98dd9f7430f..638c74f7de7 100644
--- a/Documentation/netlabel/lsm_interface.txt
+++ b/Documentation/netlabel/lsm_interface.txt
@@ -38,7 +38,7 @@ Depending on the exact configuration, translation between the network packet
label and the internal LSM security identifier can be time consuming. The
NetLabel label mapping cache is a caching mechanism which can be used to
sidestep much of this overhead once a mapping has been established. Once the
-LSM has received a packet, used NetLabel to decode it's security attributes,
+LSM has received a packet, used NetLabel to decode its security attributes,
and translated the security attributes into a LSM internal identifier the LSM
can use the NetLabel caching functions to associate the LSM internal
identifier with the network packet's label. This means that in the future
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index 50189bf07d5..fe5c099b8fc 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -32,6 +32,8 @@ cs89x0.txt
- the Crystal LAN (CS8900/20-based) Ethernet ISA adapter driver
cxacru.txt
- Conexant AccessRunner USB ADSL Modem
+cxacru-cf.py
+ - Conexant AccessRunner USB ADSL Modem configuration file parser
de4x5.txt
- the Digital EtherWORKS DE4?? and DE5?? PCI Ethernet driver
decnet.txt
diff --git a/Documentation/networking/3c509.txt b/Documentation/networking/3c509.txt
index 3c45d5dcd63..dcc9eaf5939 100644
--- a/Documentation/networking/3c509.txt
+++ b/Documentation/networking/3c509.txt
@@ -31,7 +31,7 @@ models:
Large portions of this documentation were heavily borrowed from the guide
written the original author of the 3c509 driver, Donald Becker. The master
copy of that document, which contains notes on older versions of the driver,
-currently resides on Scyld web server: http://www.scyld.com/network/3c509.html.
+currently resides on Scyld web server: http://www.scyld.com/.
(1) Special Driver Features
diff --git a/Documentation/networking/Makefile b/Documentation/networking/Makefile
index 6d8af1ac56c..5aba7a33aee 100644
--- a/Documentation/networking/Makefile
+++ b/Documentation/networking/Makefile
@@ -6,3 +6,5 @@ hostprogs-y := ifenslave
# Tell kbuild to always build the programs
always := $(hostprogs-y)
+
+obj-m := timestamping/
diff --git a/Documentation/networking/README.ipw2100 b/Documentation/networking/README.ipw2100
index f3fcaa41f77..6f85e1d0603 100644
--- a/Documentation/networking/README.ipw2100
+++ b/Documentation/networking/README.ipw2100
@@ -72,8 +72,7 @@ such, if you are interested in deploying or shipping a driver as part of
solution intended to be used for purposes other than development, please
obtain a tested driver from Intel Customer Support at:
-http://support.intel.com/support/notebook/sb/CS-006408.htm
-
+http://www.intel.com/support/wireless/sb/CS-006408.htm
1. Introduction
-----------------------------------------------
diff --git a/Documentation/networking/README.ipw2200 b/Documentation/networking/README.ipw2200
index 80c728522c4..616a8e540b0 100644
--- a/Documentation/networking/README.ipw2200
+++ b/Documentation/networking/README.ipw2200
@@ -85,7 +85,7 @@ such, if you are interested in deploying or shipping a driver as part of
solution intended to be used for purposes other than development, please
obtain a tested driver from Intel Customer Support at:
-http://support.intel.com/support/notebook/sb/CS-006408.htm
+http://support.intel.com
1. Introduction
@@ -171,7 +171,7 @@ Where the supported parameter are:
led
Can be used to turn on experimental LED code.
- 0 = Off, 1 = On. Default is 0.
+ 0 = Off, 1 = On. Default is 1.
mode
Can be used to set the default mode of the adapter.
diff --git a/Documentation/networking/README.sb1000 b/Documentation/networking/README.sb1000
index f82d42584e9..f92c2aac56a 100644
--- a/Documentation/networking/README.sb1000
+++ b/Documentation/networking/README.sb1000
@@ -27,8 +27,8 @@ cable modem easy.
in Franco's original source code distribution .tar.gz file. Support for
the sb1000 driver can be found at:
- http://home.adelphia.net/~siglercm/sb1000.html
- http://linuxpower.cx/~cable/
+ http://web.archive.org/web/*/http://home.adelphia.net/~siglercm/sb1000.html
+ http://web.archive.org/web/*/http://linuxpower.cx/~cable/
along with these utilities.
diff --git a/Documentation/networking/arcnet.txt b/Documentation/networking/arcnet.txt
index 79601254038..9ff57950215 100644
--- a/Documentation/networking/arcnet.txt
+++ b/Documentation/networking/arcnet.txt
@@ -68,7 +68,7 @@ REAL NAME" to listserv@tichy.ch.uj.edu.pl. Then, to submit messages to the
list, mail to linux-arcnet@tichy.ch.uj.edu.pl.
There are archives of the mailing list at:
- http://tichy.ch.uj.edu.pl/lists/linux-arcnet
+ http://epistolary.org/mailman/listinfo.cgi/arcnet
The people on linux-net@vger.kernel.org have also been known to be very
helpful, especially when we're talking about ALPHA Linux kernels that may or
@@ -79,7 +79,7 @@ Other Drivers and Info
----------------------
You can try my ARCNET page on the World Wide Web at:
- http://www.worldvisions.ca/~apenwarr/arcnet/
+ http://www.qis.net/~jschmitz/arcnet/
Also, SMC (one of the companies that makes ARCnet cards) has a WWW site you
might be interested in, which includes several drivers for various cards
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index 61f516b135b..d2b62b71b61 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -49,6 +49,7 @@ Table of Contents
3.3 Configuring Bonding Manually with Ifenslave
3.3.1 Configuring Multiple Bonds Manually
3.4 Configuring Bonding Manually via Sysfs
+3.5 Overriding Configuration for Special Cases
4. Querying Bonding Configuration
4.1 Bonding Configuration
@@ -1318,8 +1319,87 @@ echo 2000 > /sys/class/net/bond1/bonding/arp_interval
echo +eth2 > /sys/class/net/bond1/bonding/slaves
echo +eth3 > /sys/class/net/bond1/bonding/slaves
-
-4. Querying Bonding Configuration
+3.5 Overriding Configuration for Special Cases
+----------------------------------------------
+When using the bonding driver, the physical port which transmits a frame is
+typically selected by the bonding driver, and is not relevant to the user or
+system administrator. The output port is simply selected using the policies of
+the selected bonding mode. On occasion however, it is helpful to direct certain
+classes of traffic to certain physical interfaces on output to implement
+slightly more complex policies. For example, to reach a web server over a
+bonded interface in which eth0 connects to a private network, while eth1
+connects via a public network, it may be desirous to bias the bond to send said
+traffic over eth0 first, using eth1 only as a fall back, while all other traffic
+can safely be sent over either interface. Such configurations may be achieved
+using the traffic control utilities inherent in linux.
+
+By default the bonding driver is multiqueue aware and 16 queues are created
+when the driver initializes (see Documentation/networking/multiqueue.txt
+for details). If more or less queues are desired the module parameter
+tx_queues can be used to change this value. There is no sysfs parameter
+available as the allocation is done at module init time.
+
+The output of the file /proc/net/bonding/bondX has changed so the output Queue
+ID is now printed for each slave:
+
+Bonding Mode: fault-tolerance (active-backup)
+Primary Slave: None
+Currently Active Slave: eth0
+MII Status: up
+MII Polling Interval (ms): 0
+Up Delay (ms): 0
+Down Delay (ms): 0
+
+Slave Interface: eth0
+MII Status: up
+Link Failure Count: 0
+Permanent HW addr: 00:1a:a0:12:8f:cb
+Slave queue ID: 0
+
+Slave Interface: eth1
+MII Status: up
+Link Failure Count: 0
+Permanent HW addr: 00:1a:a0:12:8f:cc
+Slave queue ID: 2
+
+The queue_id for a slave can be set using the command:
+
+# echo "eth1:2" > /sys/class/net/bond0/bonding/queue_id
+
+Any interface that needs a queue_id set should set it with multiple calls
+like the one above until proper priorities are set for all interfaces. On
+distributions that allow configuration via initscripts, multiple 'queue_id'
+arguments can be added to BONDING_OPTS to set all needed slave queues.
+
+These queue id's can be used in conjunction with the tc utility to configure
+a multiqueue qdisc and filters to bias certain traffic to transmit on certain
+slave devices. For instance, say we wanted, in the above configuration to
+force all traffic bound to 192.168.1.100 to use eth1 in the bond as its output
+device. The following commands would accomplish this:
+
+# tc qdisc add dev bond0 handle 1 root multiq
+
+# tc filter add dev bond0 protocol ip parent 1: prio 1 u32 match ip dst \
+ 192.168.1.100 action skbedit queue_mapping 2
+
+These commands tell the kernel to attach a multiqueue queue discipline to the
+bond0 interface and filter traffic enqueued to it, such that packets with a dst
+ip of 192.168.1.100 have their output queue mapping value overwritten to 2.
+This value is then passed into the driver, causing the normal output path
+selection policy to be overridden, selecting instead qid 2, which maps to eth1.
+
+Note that qid values begin at 1. Qid 0 is reserved to initiate to the driver
+that normal output policy selection should take place. One benefit to simply
+leaving the qid for a slave to 0 is the multiqueue awareness in the bonding
+driver that is now present. This awareness allows tc filters to be placed on
+slave devices as well as bond devices and the bonding driver will simply act as
+a pass-through for selecting output queues on the slave device rather than
+output port selection.
+
+This feature first appeared in bonding driver version 3.7.0 and support for
+output slave selection was limited to round-robin and active-backup modes.
+
+4 Querying Bonding Configuration
=================================
4.1 Bonding Configuration
@@ -2432,7 +2512,7 @@ be found at:
https://lists.sourceforge.net/lists/listinfo/bonding-devel
Donald Becker's Ethernet Drivers and diag programs may be found at :
- - http://www.scyld.com/network/
+ - http://web.archive.org/web/*/http://www.scyld.com/network/
You will also find a lot of information regarding Ethernet, NWay, MII,
etc. at www.scyld.com.
diff --git a/Documentation/networking/caif/Linux-CAIF.txt b/Documentation/networking/caif/Linux-CAIF.txt
new file mode 100644
index 00000000000..7fe7a9a33a4
--- /dev/null
+++ b/Documentation/networking/caif/Linux-CAIF.txt
@@ -0,0 +1,212 @@
+Linux CAIF
+===========
+copyright (C) ST-Ericsson AB 2010
+Author: Sjur Brendeland/ sjur.brandeland@stericsson.com
+License terms: GNU General Public License (GPL) version 2
+
+
+Introduction
+------------
+CAIF is a MUX protocol used by ST-Ericsson cellular modems for
+communication between Modem and host. The host processes can open virtual AT
+channels, initiate GPRS Data connections, Video channels and Utility Channels.
+The Utility Channels are general purpose pipes between modem and host.
+
+ST-Ericsson modems support a number of transports between modem
+and host. Currently, UART and Loopback are available for Linux.
+
+
+Architecture:
+------------
+The implementation of CAIF is divided into:
+* CAIF Socket Layer, Kernel API, and Net Device.
+* CAIF Core Protocol Implementation
+* CAIF Link Layer, implemented as NET devices.
+
+
+ RTNL
+ !
+ ! +------+ +------+ +------+
+ ! +------+! +------+! +------+!
+ ! ! Sock !! !Kernel!! ! Net !!
+ ! ! API !+ ! API !+ ! Dev !+ <- CAIF Client APIs
+ ! +------+ +------! +------+
+ ! ! ! !
+ ! +----------!----------+
+ ! +------+ <- CAIF Protocol Implementation
+ +-------> ! CAIF !
+ ! Core !
+ +------+
+ +--------!--------+
+ ! !
+ +------+ +-----+
+ ! ! ! TTY ! <- Link Layer (Net Devices)
+ +------+ +-----+
+
+
+Using the Kernel API
+----------------------
+The Kernel API is used for accessing CAIF channels from the
+kernel.
+The user of the API has to implement two callbacks for receive
+and control.
+The receive callback gives a CAIF packet as a SKB. The control
+callback will
+notify of channel initialization complete, and flow-on/flow-
+off.
+
+
+ struct caif_device caif_dev = {
+ .caif_config = {
+ .name = "MYDEV"
+ .type = CAIF_CHTY_AT
+ }
+ .receive_cb = my_receive,
+ .control_cb = my_control,
+ };
+ caif_add_device(&caif_dev);
+ caif_transmit(&caif_dev, skb);
+
+See the caif_kernel.h for details about the CAIF kernel API.
+
+
+I M P L E M E N T A T I O N
+===========================
+===========================
+
+CAIF Core Protocol Layer
+=========================================
+
+CAIF Core layer implements the CAIF protocol as defined by ST-Ericsson.
+It implements the CAIF protocol stack in a layered approach, where
+each layer described in the specification is implemented as a separate layer.
+The architecture is inspired by the design patterns "Protocol Layer" and
+"Protocol Packet".
+
+== CAIF structure ==
+The Core CAIF implementation contains:
+ - Simple implementation of CAIF.
+ - Layered architecture (a la Streams), each layer in the CAIF
+ specification is implemented in a separate c-file.
+ - Clients must implement PHY layer to access physical HW
+ with receive and transmit functions.
+ - Clients must call configuration function to add PHY layer.
+ - Clients must implement CAIF layer to consume/produce
+ CAIF payload with receive and transmit functions.
+ - Clients must call configuration function to add and connect the
+ Client layer.
+ - When receiving / transmitting CAIF Packets (cfpkt), ownership is passed
+ to the called function (except for framing layers' receive functions
+ or if a transmit function returns an error, in which case the caller
+ must free the packet).
+
+Layered Architecture
+--------------------
+The CAIF protocol can be divided into two parts: Support functions and Protocol
+Implementation. The support functions include:
+
+ - CFPKT CAIF Packet. Implementation of CAIF Protocol Packet. The
+ CAIF Packet has functions for creating, destroying and adding content
+ and for adding/extracting header and trailers to protocol packets.
+
+ - CFLST CAIF list implementation.
+
+ - CFGLUE CAIF Glue. Contains OS Specifics, such as memory
+ allocation, endianness, etc.
+
+The CAIF Protocol implementation contains:
+
+ - CFCNFG CAIF Configuration layer. Configures the CAIF Protocol
+ Stack and provides a Client interface for adding Link-Layer and
+ Driver interfaces on top of the CAIF Stack.
+
+ - CFCTRL CAIF Control layer. Encodes and Decodes control messages
+ such as enumeration and channel setup. Also matches request and
+ response messages.
+
+ - CFSERVL General CAIF Service Layer functionality; handles flow
+ control and remote shutdown requests.
+
+ - CFVEI CAIF VEI layer. Handles CAIF AT Channels on VEI (Virtual
+ External Interface). This layer encodes/decodes VEI frames.
+
+ - CFDGML CAIF Datagram layer. Handles CAIF Datagram layer (IP
+ traffic), encodes/decodes Datagram frames.
+
+ - CFMUX CAIF Mux layer. Handles multiplexing between multiple
+ physical bearers and multiple channels such as VEI, Datagram, etc.
+ The MUX keeps track of the existing CAIF Channels and
+ Physical Instances and selects the apropriate instance based
+ on Channel-Id and Physical-ID.
+
+ - CFFRML CAIF Framing layer. Handles Framing i.e. Frame length
+ and frame checksum.
+
+ - CFSERL CAIF Serial layer. Handles concatenation/split of frames
+ into CAIF Frames with correct length.
+
+
+
+ +---------+
+ | Config |
+ | CFCNFG |
+ +---------+
+ !
+ +---------+ +---------+ +---------+
+ | AT | | Control | | Datagram|
+ | CFVEIL | | CFCTRL | | CFDGML |
+ +---------+ +---------+ +---------+
+ \_____________!______________/
+ !
+ +---------+
+ | MUX |
+ | |
+ +---------+
+ _____!_____
+ / \
+ +---------+ +---------+
+ | CFFRML | | CFFRML |
+ | Framing | | Framing |
+ +---------+ +---------+
+ ! !
+ +---------+ +---------+
+ | | | Serial |
+ | | | CFSERL |
+ +---------+ +---------+
+
+
+In this layered approach the following "rules" apply.
+ - All layers embed the same structure "struct cflayer"
+ - A layer does not depend on any other layer's private data.
+ - Layers are stacked by setting the pointers
+ layer->up , layer->dn
+ - In order to send data upwards, each layer should do
+ layer->up->receive(layer->up, packet);
+ - In order to send data downwards, each layer should do
+ layer->dn->transmit(layer->dn, packet);
+
+
+Linux Driver Implementation
+===========================
+
+Linux GPRS Net Device and CAIF socket are implemented on top of the
+CAIF Core protocol. The Net device and CAIF socket have an instance of
+'struct cflayer', just like the CAIF Core protocol stack.
+Net device and Socket implement the 'receive()' function defined by
+'struct cflayer', just like the rest of the CAIF stack. In this way, transmit and
+receive of packets is handled as by the rest of the layers: the 'dn->transmit()'
+function is called in order to transmit data.
+
+The layer on top of the CAIF Core implementation is
+sometimes referred to as the "Client layer".
+
+
+Configuration of Link Layer
+---------------------------
+The Link Layer is implemented as Linux net devices (struct net_device).
+Payload handling and registration is done using standard Linux mechanisms.
+
+The CAIF Protocol relies on a loss-less link layer without implementing
+retransmission. This implies that packet drops must not happen.
+Therefore a flow-control mechanism is implemented where the physical
+interface can initiate flow stop for all CAIF Channels.
diff --git a/Documentation/networking/caif/README b/Documentation/networking/caif/README
new file mode 100644
index 00000000000..757ccfaa138
--- /dev/null
+++ b/Documentation/networking/caif/README
@@ -0,0 +1,109 @@
+Copyright (C) ST-Ericsson AB 2010
+Author: Sjur Brendeland/ sjur.brandeland@stericsson.com
+License terms: GNU General Public License (GPL) version 2
+---------------------------------------------------------
+
+=== Start ===
+If you have compiled CAIF for modules do:
+
+$modprobe crc_ccitt
+$modprobe caif
+$modprobe caif_socket
+$modprobe chnl_net
+
+
+=== Preparing the setup with a STE modem ===
+
+If you are working on integration of CAIF you should make sure
+that the kernel is built with module support.
+
+There are some things that need to be tweaked to get the host TTY correctly
+set up to talk to the modem.
+Since the CAIF stack is running in the kernel and we want to use the existing
+TTY, we are installing our physical serial driver as a line discipline above
+the TTY device.
+
+To achieve this we need to install the N_CAIF ldisc from user space.
+The benefit is that we can hook up to any TTY.
+
+The use of Start-of-frame-extension (STX) must also be set as
+module parameter "ser_use_stx".
+
+Normally Frame Checksum is always used on UART, but this is also provided as a
+module parameter "ser_use_fcs".
+
+$ modprobe caif_serial ser_ttyname=/dev/ttyS0 ser_use_stx=yes
+$ ifconfig caif_ttyS0 up
+
+PLEASE NOTE: There is a limitation in Android shell.
+ It only accepts one argument to insmod/modprobe!
+
+=== Trouble shooting ===
+
+There are debugfs parameters provided for serial communication.
+/sys/kernel/debug/caif_serial/<tty-name>/
+
+* ser_state: Prints the bit-mask status where
+ - 0x02 means SENDING, this is a transient state.
+ - 0x10 means FLOW_OFF_SENT, i.e. the previous frame has not been sent
+ and is blocking further send operation. Flow OFF has been propagated
+ to all CAIF Channels using this TTY.
+
+* tty_status: Prints the bit-mask tty status information
+ - 0x01 - tty->warned is on.
+ - 0x02 - tty->low_latency is on.
+ - 0x04 - tty->packed is on.
+ - 0x08 - tty->flow_stopped is on.
+ - 0x10 - tty->hw_stopped is on.
+ - 0x20 - tty->stopped is on.
+
+* last_tx_msg: Binary blob Prints the last transmitted frame.
+ This can be printed with
+ $od --format=x1 /sys/kernel/debug/caif_serial/<tty>/last_rx_msg.
+ The first two tx messages sent look like this. Note: The initial
+ byte 02 is start of frame extension (STX) used for re-syncing
+ upon errors.
+
+ - Enumeration:
+ 0000000 02 05 00 00 03 01 d2 02
+ | | | | | |
+ STX(1) | | | |
+ Length(2)| | |
+ Control Channel(1)
+ Command:Enumeration(1)
+ Link-ID(1)
+ Checksum(2)
+ - Channel Setup:
+ 0000000 02 07 00 00 00 21 a1 00 48 df
+ | | | | | | | |
+ STX(1) | | | | | |
+ Length(2)| | | | |
+ Control Channel(1)
+ Command:Channel Setup(1)
+ Channel Type(1)
+ Priority and Link-ID(1)
+ Endpoint(1)
+ Checksum(2)
+
+* last_rx_msg: Prints the last transmitted frame.
+ The RX messages for LinkSetup look almost identical but they have the
+ bit 0x20 set in the command bit, and Channel Setup has added one byte
+ before Checksum containing Channel ID.
+ NOTE: Several CAIF Messages might be concatenated. The maximum debug
+ buffer size is 128 bytes.
+
+== Error Scenarios:
+- last_tx_msg contains channel setup message and last_rx_msg is empty ->
+ The host seems to be able to send over the UART, at least the CAIF ldisc get
+ notified that sending is completed.
+
+- last_tx_msg contains enumeration message and last_rx_msg is empty ->
+ The host is not able to send the message from UART, the tty has not been
+ able to complete the transmit operation.
+
+- if /sys/kernel/debug/caif_serial/<tty>/tty_status is non-zero there
+ might be problems transmitting over UART.
+ E.g. host and modem wiring is not correct you will typically see
+ tty_status = 0x10 (hw_stopped) and ser_state = 0x10 (FLOW_OFF_SENT).
+ You will probably see the enumeration message in last_tx_message
+ and empty last_rx_message.
diff --git a/Documentation/networking/caif/spi_porting.txt b/Documentation/networking/caif/spi_porting.txt
new file mode 100644
index 00000000000..61d7c924745
--- /dev/null
+++ b/Documentation/networking/caif/spi_porting.txt
@@ -0,0 +1,208 @@
+- CAIF SPI porting -
+
+- CAIF SPI basics:
+
+Running CAIF over SPI needs some extra setup, owing to the nature of SPI.
+Two extra GPIOs have been added in order to negotiate the transfers
+ between the master and the slave. The minimum requirement for running
+CAIF over SPI is a SPI slave chip and two GPIOs (more details below).
+Please note that running as a slave implies that you need to keep up
+with the master clock. An overrun or underrun event is fatal.
+
+- CAIF SPI framework:
+
+To make porting as easy as possible, the CAIF SPI has been divided in
+two parts. The first part (called the interface part) deals with all
+generic functionality such as length framing, SPI frame negotiation
+and SPI frame delivery and transmission. The other part is the CAIF
+SPI slave device part, which is the module that you have to write if
+you want to run SPI CAIF on a new hardware. This part takes care of
+the physical hardware, both with regard to SPI and to GPIOs.
+
+- Implementing a CAIF SPI device:
+
+ - Functionality provided by the CAIF SPI slave device:
+
+ In order to implement a SPI device you will, as a minimum,
+ need to implement the following
+ functions:
+
+ int (*init_xfer) (struct cfspi_xfer * xfer, struct cfspi_dev *dev):
+
+ This function is called by the CAIF SPI interface to give
+ you a chance to set up your hardware to be ready to receive
+ a stream of data from the master. The xfer structure contains
+ both physical and logical adresses, as well as the total length
+ of the transfer in both directions.The dev parameter can be used
+ to map to different CAIF SPI slave devices.
+
+ void (*sig_xfer) (bool xfer, struct cfspi_dev *dev):
+
+ This function is called by the CAIF SPI interface when the output
+ (SPI_INT) GPIO needs to change state. The boolean value of the xfer
+ variable indicates whether the GPIO should be asserted (HIGH) or
+ deasserted (LOW). The dev parameter can be used to map to different CAIF
+ SPI slave devices.
+
+ - Functionality provided by the CAIF SPI interface:
+
+ void (*ss_cb) (bool assert, struct cfspi_ifc *ifc);
+
+ This function is called by the CAIF SPI slave device in order to
+ signal a change of state of the input GPIO (SS) to the interface.
+ Only active edges are mandatory to be reported.
+ This function can be called from IRQ context (recommended in order
+ not to introduce latency). The ifc parameter should be the pointer
+ returned from the platform probe function in the SPI device structure.
+
+ void (*xfer_done_cb) (struct cfspi_ifc *ifc);
+
+ This function is called by the CAIF SPI slave device in order to
+ report that a transfer is completed. This function should only be
+ called once both the transmission and the reception are completed.
+ This function can be called from IRQ context (recommended in order
+ not to introduce latency). The ifc parameter should be the pointer
+ returned from the platform probe function in the SPI device structure.
+
+ - Connecting the bits and pieces:
+
+ - Filling in the SPI slave device structure:
+
+ Connect the necessary callback functions.
+ Indicate clock speed (used to calculate toggle delays).
+ Chose a suitable name (helps debugging if you use several CAIF
+ SPI slave devices).
+ Assign your private data (can be used to map to your structure).
+
+ - Filling in the SPI slave platform device structure:
+ Add name of driver to connect to ("cfspi_sspi").
+ Assign the SPI slave device structure as platform data.
+
+- Padding:
+
+In order to optimize throughput, a number of SPI padding options are provided.
+Padding can be enabled independently for uplink and downlink transfers.
+Padding can be enabled for the head, the tail and for the total frame size.
+The padding needs to be correctly configured on both sides of the link.
+The padding can be changed via module parameters in cfspi_sspi.c or via
+the sysfs directory of the cfspi_sspi driver (before device registration).
+
+- CAIF SPI device template:
+
+/*
+ * Copyright (C) ST-Ericsson AB 2010
+ * Author: Daniel Martensson / Daniel.Martensson@stericsson.com
+ * License terms: GNU General Public License (GPL), version 2.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/wait.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <net/caif/caif_spi.h>
+
+MODULE_LICENSE("GPL");
+
+struct sspi_struct {
+ struct cfspi_dev sdev;
+ struct cfspi_xfer *xfer;
+};
+
+static struct sspi_struct slave;
+static struct platform_device slave_device;
+
+static irqreturn_t sspi_irq(int irq, void *arg)
+{
+ /* You only need to trigger on an edge to the active state of the
+ * SS signal. Once a edge is detected, the ss_cb() function should be
+ * called with the parameter assert set to true. It is OK
+ * (and even advised) to call the ss_cb() function in IRQ context in
+ * order not to add any delay. */
+
+ return IRQ_HANDLED;
+}
+
+static void sspi_complete(void *context)
+{
+ /* Normally the DMA or the SPI framework will call you back
+ * in something similar to this. The only thing you need to
+ * do is to call the xfer_done_cb() function, providing the pointer
+ * to the CAIF SPI interface. It is OK to call this function
+ * from IRQ context. */
+}
+
+static int sspi_init_xfer(struct cfspi_xfer *xfer, struct cfspi_dev *dev)
+{
+ /* Store transfer info. For a normal implementation you should
+ * set up your DMA here and make sure that you are ready to
+ * receive the data from the master SPI. */
+
+ struct sspi_struct *sspi = (struct sspi_struct *)dev->priv;
+
+ sspi->xfer = xfer;
+
+ return 0;
+}
+
+void sspi_sig_xfer(bool xfer, struct cfspi_dev *dev)
+{
+ /* If xfer is true then you should assert the SPI_INT to indicate to
+ * the master that you are ready to recieve the data from the master
+ * SPI. If xfer is false then you should de-assert SPI_INT to indicate
+ * that the transfer is done.
+ */
+
+ struct sspi_struct *sspi = (struct sspi_struct *)dev->priv;
+}
+
+static void sspi_release(struct device *dev)
+{
+ /*
+ * Here you should release your SPI device resources.
+ */
+}
+
+static int __init sspi_init(void)
+{
+ /* Here you should initialize your SPI device by providing the
+ * necessary functions, clock speed, name and private data. Once
+ * done, you can register your device with the
+ * platform_device_register() function. This function will return
+ * with the CAIF SPI interface initialized. This is probably also
+ * the place where you should set up your GPIOs, interrupts and SPI
+ * resources. */
+
+ int res = 0;
+
+ /* Initialize slave device. */
+ slave.sdev.init_xfer = sspi_init_xfer;
+ slave.sdev.sig_xfer = sspi_sig_xfer;
+ slave.sdev.clk_mhz = 13;
+ slave.sdev.priv = &slave;
+ slave.sdev.name = "spi_sspi";
+ slave_device.dev.release = sspi_release;
+
+ /* Initialize platform device. */
+ slave_device.name = "cfspi_sspi";
+ slave_device.dev.platform_data = &slave.sdev;
+
+ /* Register platform device. */
+ res = platform_device_register(&slave_device);
+ if (res) {
+ printk(KERN_WARNING "sspi_init: failed to register dev.\n");
+ return -ENODEV;
+ }
+
+ return res;
+}
+
+static void __exit sspi_exit(void)
+{
+ platform_device_del(&slave_device);
+}
+
+module_init(sspi_init);
+module_exit(sspi_exit);
diff --git a/Documentation/networking/cxacru-cf.py b/Documentation/networking/cxacru-cf.py
new file mode 100644
index 00000000000..b41d298398c
--- /dev/null
+++ b/Documentation/networking/cxacru-cf.py
@@ -0,0 +1,48 @@
+#!/usr/bin/env python
+# Copyright 2009 Simon Arlott
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 2 of the License, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program; if not, write to the Free Software Foundation, Inc., 59
+# Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# Usage: cxacru-cf.py < cxacru-cf.bin
+# Output: values string suitable for the sysfs adsl_config attribute
+#
+# Warning: cxacru-cf.bin with MD5 hash cdbac2689969d5ed5d4850f117702110
+# contains mis-aligned values which will stop the modem from being able
+# to make a connection. If the first and last two bytes are removed then
+# the values become valid, but the modulation will be forced to ANSI
+# T1.413 only which may not be appropriate.
+#
+# The original binary format is a packed list of le32 values.
+
+import sys
+import struct
+
+i = 0
+while True:
+ buf = sys.stdin.read(4)
+
+ if len(buf) == 0:
+ break
+ elif len(buf) != 4:
+ sys.stdout.write("\n")
+ sys.stderr.write("Error: read {0} not 4 bytes\n".format(len(buf)))
+ sys.exit(1)
+
+ if i > 0:
+ sys.stdout.write(" ")
+ sys.stdout.write("{0:x}={1}".format(i, struct.unpack("<I", buf)[0]))
+ i += 1
+
+sys.stdout.write("\n")
diff --git a/Documentation/networking/cxacru.txt b/Documentation/networking/cxacru.txt
index b074681a963..2cce04457b4 100644
--- a/Documentation/networking/cxacru.txt
+++ b/Documentation/networking/cxacru.txt
@@ -4,6 +4,12 @@ While it is capable of managing/maintaining the ADSL connection without the
module loaded, the device will sometimes stop responding after unloading the
driver and it is necessary to unplug/remove power to the device to fix this.
+Note: support for cxacru-cf.bin has been removed. It was not loaded correctly
+so it had no effect on the device configuration. Fixing it could have stopped
+existing devices working when an invalid configuration is supplied.
+
+There is a script cxacru-cf.py to convert an existing file to the sysfs form.
+
Detected devices will appear as ATM devices named "cxacru". In /sys/class/atm/
these are directories named cxacruN where N is the device number. A symlink
named device points to the USB interface device's directory which contains
@@ -15,6 +21,15 @@ several sysfs attribute files for retrieving device statistics:
* adsl_headend_environment
Information about the remote headend.
+* adsl_config
+ Configuration writing interface.
+ Write parameters in hexadecimal format <index>=<value>,
+ separated by whitespace, e.g.:
+ "1=0 a=5"
+ Up to 7 parameters at a time will be sent and the modem will restart
+ the ADSL connection when any value is set. These are logged for future
+ reference.
+
* downstream_attenuation (dB)
* downstream_bits_per_frame
* downstream_rate (kbps)
@@ -61,6 +76,7 @@ several sysfs attribute files for retrieving device statistics:
* mac_address
* modulation
+ "" (when not connected)
"ANSI T1.413"
"ITU-T G.992.1 (G.DMT)"
"ITU-T G.992.2 (G.LITE)"
diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt
index b132e4a3cf0..a62fdf7a6bf 100644
--- a/Documentation/networking/dccp.txt
+++ b/Documentation/networking/dccp.txt
@@ -58,8 +58,10 @@ DCCP_SOCKOPT_GET_CUR_MPS is read-only and retrieves the current maximum packet
size (application payload size) in bytes, see RFC 4340, section 14.
DCCP_SOCKOPT_AVAILABLE_CCIDS is also read-only and returns the list of CCIDs
-supported by the endpoint (see include/linux/dccp.h for symbolic constants).
-The caller needs to provide a sufficiently large (> 2) array of type uint8_t.
+supported by the endpoint. The option value is an array of type uint8_t whose
+size is passed as option length. The minimum array size is 4 elements, the
+value returned in the optlen argument always reflects the true number of
+built-in CCIDs.
DCCP_SOCKOPT_CCID is write-only and sets both the TX and RX CCIDs at the same
time, combining the operation of the next two socket options. This option is
diff --git a/Documentation/networking/decnet.txt b/Documentation/networking/decnet.txt
index d8968958d83..e12a4900cf7 100644
--- a/Documentation/networking/decnet.txt
+++ b/Documentation/networking/decnet.txt
@@ -4,7 +4,7 @@
1) Other documentation....
o Project Home Pages
- http://www.chygwyn.com/DECnet/ - Kernel info
+ http://www.chygwyn.com/ - Kernel info
http://linux-decnet.sourceforge.net/ - Userland tools
http://www.sourceforge.net/projects/linux-decnet/ - Status page
diff --git a/Documentation/networking/dns_resolver.txt b/Documentation/networking/dns_resolver.txt
new file mode 100644
index 00000000000..aefd1e68180
--- /dev/null
+++ b/Documentation/networking/dns_resolver.txt
@@ -0,0 +1,146 @@
+ ===================
+ DNS Resolver Module
+ ===================
+
+Contents:
+
+ - Overview.
+ - Compilation.
+ - Setting up.
+ - Usage.
+ - Mechanism.
+ - Debugging.
+
+
+========
+OVERVIEW
+========
+
+The DNS resolver module provides a way for kernel services to make DNS queries
+by way of requesting a key of key type dns_resolver. These queries are
+upcalled to userspace through /sbin/request-key.
+
+These routines must be supported by userspace tools dns.upcall, cifs.upcall and
+request-key. It is under development and does not yet provide the full feature
+set. The features it does support include:
+
+ (*) Implements the dns_resolver key_type to contact userspace.
+
+It does not yet support the following AFS features:
+
+ (*) Dns query support for AFSDB resource record.
+
+This code is extracted from the CIFS filesystem.
+
+
+===========
+COMPILATION
+===========
+
+The module should be enabled by turning on the kernel configuration options:
+
+ CONFIG_DNS_RESOLVER - tristate "DNS Resolver support"
+
+
+==========
+SETTING UP
+==========
+
+To set up this facility, the /etc/request-key.conf file must be altered so that
+/sbin/request-key can appropriately direct the upcalls. For example, to handle
+basic dname to IPv4/IPv6 address resolution, the following line should be
+added:
+
+ #OP TYPE DESC CO-INFO PROGRAM ARG1 ARG2 ARG3 ...
+ #====== ============ ======= ======= ==========================
+ create dns_resolver * * /usr/sbin/cifs.upcall %k
+
+To direct a query for query type 'foo', a line of the following should be added
+before the more general line given above as the first match is the one taken.
+
+ create dns_resolver foo:* * /usr/sbin/dns.foo %k
+
+
+
+=====
+USAGE
+=====
+
+To make use of this facility, one of the following functions that are
+implemented in the module can be called after doing:
+
+ #include <linux/dns_resolver.h>
+
+ (1) int dns_query(const char *type, const char *name, size_t namelen,
+ const char *options, char **_result, time_t *_expiry);
+
+ This is the basic access function. It looks for a cached DNS query and if
+ it doesn't find it, it upcalls to userspace to make a new DNS query, which
+ may then be cached. The key description is constructed as a string of the
+ form:
+
+ [<type>:]<name>
+
+ where <type> optionally specifies the particular upcall program to invoke,
+ and thus the type of query to do, and <name> specifies the string to be
+ looked up. The default query type is a straight hostname to IP address
+ set lookup.
+
+ The name parameter is not required to be a NUL-terminated string, and its
+ length should be given by the namelen argument.
+
+ The options parameter may be NULL or it may be a set of options
+ appropriate to the query type.
+
+ The return value is a string appropriate to the query type. For instance,
+ for the default query type it is just a list of comma-separated IPv4 and
+ IPv6 addresses. The caller must free the result.
+
+ The length of the result string is returned on success, and a negative
+ error code is returned otherwise. -EKEYREJECTED will be returned if the
+ DNS lookup failed.
+
+ If _expiry is non-NULL, the expiry time (TTL) of the result will be
+ returned also.
+
+
+=========
+MECHANISM
+=========
+
+The dnsresolver module registers a key type called "dns_resolver". Keys of
+this type are used to transport and cache DNS lookup results from userspace.
+
+When dns_query() is invoked, it calls request_key() to search the local
+keyrings for a cached DNS result. If that fails to find one, it upcalls to
+userspace to get a new result.
+
+Upcalls to userspace are made through the request_key() upcall vector, and are
+directed by means of configuration lines in /etc/request-key.conf that tell
+/sbin/request-key what program to run to instantiate the key.
+
+The upcall handler program is responsible for querying the DNS, processing the
+result into a form suitable for passing to the keyctl_instantiate_key()
+routine. This then passes the data to dns_resolver_instantiate() which strips
+off and processes any options included in the data, and then attaches the
+remainder of the string to the key as its payload.
+
+The upcall handler program should set the expiry time on the key to that of the
+lowest TTL of all the records it has extracted a result from. This means that
+the key will be discarded and recreated when the data it holds has expired.
+
+dns_query() returns a copy of the value attached to the key, or an error if
+that is indicated instead.
+
+See <file:Documentation/keys-request-key.txt> for further information about
+request-key function.
+
+
+=========
+DEBUGGING
+=========
+
+Debugging messages can be turned on dynamically by writing a 1 into the
+following file:
+
+ /sys/module/dnsresolver/parameters/debug
diff --git a/Documentation/networking/e1000.txt b/Documentation/networking/e1000.txt
index 2df71861e57..d9271e74e48 100644
--- a/Documentation/networking/e1000.txt
+++ b/Documentation/networking/e1000.txt
@@ -1,82 +1,35 @@
Linux* Base Driver for the Intel(R) PRO/1000 Family of Adapters
===============================================================
-September 26, 2006
-
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
Contents
========
-- In This Release
- Identifying Your Adapter
-- Building and Installation
- Command Line Parameters
- Speed and Duplex Configuration
- Additional Configurations
-- Known Issues
- Support
-
-In This Release
-===============
-
-This file describes the Linux* Base Driver for the Intel(R) PRO/1000 Family
-of Adapters. This driver includes support for Itanium(R)2-based systems.
-
-For questions related to hardware requirements, refer to the documentation
-supplied with your Intel PRO/1000 adapter. All hardware requirements listed
-apply to use with Linux.
-
-The following features are now available in supported kernels:
- - Native VLANs
- - Channel Bonding (teaming)
- - SNMP
-
-Channel Bonding documentation can be found in the Linux kernel source:
-/Documentation/networking/bonding.txt
-
-The driver information previously displayed in the /proc filesystem is not
-supported in this release. Alternatively, you can use ethtool (version 1.6
-or later), lspci, and ifconfig to obtain the same information.
-
-Instructions on updating ethtool can be found in the section "Additional
-Configurations" later in this document.
-
-NOTE: The Intel(R) 82562v 10/100 Network Connection only provides 10/100
-support.
-
-
Identifying Your Adapter
========================
For more information on how to identify your adapter, go to the Adapter &
Driver ID Guide at:
- http://support.intel.com/support/network/adapter/pro100/21397.htm
+ http://support.intel.com/support/go/network/adapter/idguide.htm
For the latest Intel network drivers for Linux, refer to the following
website. In the search field, enter your adapter name or type, or use the
networking link on the left to search for your adapter:
- http://downloadfinder.intel.com/scripts-df/support_intel.asp
-
+ http://support.intel.com/support/go/network/adapter/home.htm
Command Line Parameters
=======================
-If the driver is built as a module, the following optional parameters
-are used by entering them on the command line with the modprobe command
-using this syntax:
-
- modprobe e1000 [<option>=<VAL1>,<VAL2>,...]
-
-For example, with two PRO/1000 PCI adapters, entering:
-
- modprobe e1000 TxDescriptors=80,128
-
-loads the e1000 driver with 80 TX descriptors for the first adapter and
-128 TX descriptors for the second adapter.
-
The default value for each parameter is generally the recommended setting,
unless otherwise noted.
@@ -89,10 +42,6 @@ NOTES: For more information about the AutoNeg, Duplex, and Speed
parameters, see the application note at:
http://www.intel.com/design/network/applnots/ap450.htm
- A descriptor describes a data buffer and attributes related to
- the data buffer. This information is accessed by the hardware.
-
-
AutoNeg
-------
(Supported only on adapters with copper connections)
@@ -106,7 +55,6 @@ Duplex parameters must not be specified.
NOTE: Refer to the Speed and Duplex section of this readme for more
information on the AutoNeg parameter.
-
Duplex
------
(Supported only on adapters with copper connections)
@@ -119,7 +67,6 @@ set to auto-negotiate, the board auto-detects the correct duplex. If the
link partner is forced (either full or half), Duplex defaults to half-
duplex.
-
FlowControl
-----------
Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx)
@@ -128,16 +75,16 @@ Default Value: Reads flow control settings from the EEPROM
This parameter controls the automatic generation(Tx) and response(Rx)
to Ethernet PAUSE frames.
-
InterruptThrottleRate
---------------------
(not supported on Intel(R) 82542, 82543 or 82544-based adapters)
-Valid Range: 0,1,3,100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
+Valid Range: 0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative,
+ 4=simplified balancing)
Default Value: 3
The driver can limit the amount of interrupts per second that the adapter
-will generate for incoming packets. It does this by writing a value to the
-adapter that is based on the maximum amount of interrupts that the adapter
+will generate for incoming packets. It does this by writing a value to the
+adapter that is based on the maximum amount of interrupts that the adapter
will generate per second.
Setting InterruptThrottleRate to a value greater or equal to 100
@@ -146,37 +93,43 @@ per second, even if more packets have come in. This reduces interrupt
load on the system and can lower CPU utilization under heavy load,
but will increase latency as packets are not processed as quickly.
-The default behaviour of the driver previously assumed a static
-InterruptThrottleRate value of 8000, providing a good fallback value for
-all traffic types,but lacking in small packet performance and latency.
-The hardware can handle many more small packets per second however, and
+The default behaviour of the driver previously assumed a static
+InterruptThrottleRate value of 8000, providing a good fallback value for
+all traffic types,but lacking in small packet performance and latency.
+The hardware can handle many more small packets per second however, and
for this reason an adaptive interrupt moderation algorithm was implemented.
Since 7.3.x, the driver has two adaptive modes (setting 1 or 3) in which
-it dynamically adjusts the InterruptThrottleRate value based on the traffic
+it dynamically adjusts the InterruptThrottleRate value based on the traffic
that it receives. After determining the type of incoming traffic in the last
-timeframe, it will adjust the InterruptThrottleRate to an appropriate value
+timeframe, it will adjust the InterruptThrottleRate to an appropriate value
for that traffic.
The algorithm classifies the incoming traffic every interval into
-classes. Once the class is determined, the InterruptThrottleRate value is
-adjusted to suit that traffic type the best. There are three classes defined:
+classes. Once the class is determined, the InterruptThrottleRate value is
+adjusted to suit that traffic type the best. There are three classes defined:
"Bulk traffic", for large amounts of packets of normal size; "Low latency",
for small amounts of traffic and/or a significant percentage of small
-packets; and "Lowest latency", for almost completely small packets or
+packets; and "Lowest latency", for almost completely small packets or
minimal traffic.
-In dynamic conservative mode, the InterruptThrottleRate value is set to 4000
-for traffic that falls in class "Bulk traffic". If traffic falls in the "Low
-latency" or "Lowest latency" class, the InterruptThrottleRate is increased
+In dynamic conservative mode, the InterruptThrottleRate value is set to 4000
+for traffic that falls in class "Bulk traffic". If traffic falls in the "Low
+latency" or "Lowest latency" class, the InterruptThrottleRate is increased
stepwise to 20000. This default mode is suitable for most applications.
For situations where low latency is vital such as cluster or
grid computing, the algorithm can reduce latency even more when
InterruptThrottleRate is set to mode 1. In this mode, which operates
-the same as mode 3, the InterruptThrottleRate will be increased stepwise to
+the same as mode 3, the InterruptThrottleRate will be increased stepwise to
70000 for traffic in class "Lowest latency".
+In simplified mode the interrupt rate is based on the ratio of Tx and
+Rx traffic. If the bytes per second rate is approximately equal, the
+interrupt rate will drop as low as 2000 interrupts per second. If the
+traffic is mostly transmit or mostly receive, the interrupt rate could
+be as high as 8000.
+
Setting InterruptThrottleRate to 0 turns off any interrupt moderation
and may improve small packet latency, but is generally not suitable
for bulk throughput traffic.
@@ -212,8 +165,6 @@ NOTE: When e1000 is loaded with default settings and multiple adapters
be platform-specific. If CPU utilization is not a concern, use
RX_POLLING (NAPI) and default driver settings.
-
-
RxDescriptors
-------------
Valid Range: 80-256 for 82542 and 82543-based adapters
@@ -225,15 +176,14 @@ by the driver. Increasing this value allows the driver to buffer more
incoming packets, at the expense of increased system memory utilization.
Each descriptor is 16 bytes. A receive buffer is also allocated for each
-descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending
+descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending
on the MTU setting. The maximum MTU size is 16110.
-NOTE: MTU designates the frame size. It only needs to be set for Jumbo
- Frames. Depending on the available system resources, the request
- for a higher number of receive descriptors may be denied. In this
+NOTE: MTU designates the frame size. It only needs to be set for Jumbo
+ Frames. Depending on the available system resources, the request
+ for a higher number of receive descriptors may be denied. In this
case, use a lower number.
-
RxIntDelay
----------
Valid Range: 0-65535 (0=off)
@@ -254,7 +204,6 @@ CAUTION: When setting RxIntDelay to a value other than 0, adapters may
restoring the network connection. To eliminate the potential
for the hang ensure that RxIntDelay is set to 0.
-
RxAbsIntDelay
-------------
(This parameter is supported only on 82540, 82545 and later adapters.)
@@ -268,7 +217,6 @@ packet is received within the set amount of time. Proper tuning,
along with RxIntDelay, may improve traffic throughput in specific network
conditions.
-
Speed
-----
(This parameter is supported only on adapters with copper connections.)
@@ -280,7 +228,6 @@ Speed forces the line speed to the specified value in megabits per second
partner is set to auto-negotiate, the board will auto-detect the correct
speed. Duplex should also be set when Speed is set to either 10 or 100.
-
TxDescriptors
-------------
Valid Range: 80-256 for 82542 and 82543-based adapters
@@ -295,6 +242,36 @@ NOTE: Depending on the available system resources, the request for a
higher number of transmit descriptors may be denied. In this case,
use a lower number.
+TxDescriptorStep
+----------------
+Valid Range: 1 (use every Tx Descriptor)
+ 4 (use every 4th Tx Descriptor)
+
+Default Value: 1 (use every Tx Descriptor)
+
+On certain non-Intel architectures, it has been observed that intense TX
+traffic bursts of short packets may result in an improper descriptor
+writeback. If this occurs, the driver will report a "TX Timeout" and reset
+the adapter, after which the transmit flow will restart, though data may
+have stalled for as much as 10 seconds before it resumes.
+
+The improper writeback does not occur on the first descriptor in a system
+memory cache-line, which is typically 32 bytes, or 4 descriptors long.
+
+Setting TxDescriptorStep to a value of 4 will ensure that all TX descriptors
+are aligned to the start of a system memory cache line, and so this problem
+will not occur.
+
+NOTES: Setting TxDescriptorStep to 4 effectively reduces the number of
+ TxDescriptors available for transmits to 1/4 of the normal allocation.
+ This has a possible negative performance impact, which may be
+ compensated for by allocating more descriptors using the TxDescriptors
+ module parameter.
+
+ There are other conditions which may result in "TX Timeout", which will
+ not be resolved by the use of the TxDescriptorStep parameter. As the
+ issue addressed by this parameter has never been observed on Intel
+ Architecture platforms, it should not be used on Intel platforms.
TxIntDelay
----------
@@ -307,7 +284,6 @@ efficiency if properly tuned for specific network traffic. If the
system is reporting dropped transmits, this value may be set too high
causing the driver to run out of available transmit descriptors.
-
TxAbsIntDelay
-------------
(This parameter is supported only on 82540, 82545 and later adapters.)
@@ -330,6 +306,35 @@ Default Value: 1
A value of '1' indicates that the driver should enable IP checksum
offload for received packets (both UDP and TCP) to the adapter hardware.
+Copybreak
+---------
+Valid Range: 0-xxxxxxx (0=off)
+Default Value: 256
+Usage: insmod e1000.ko copybreak=128
+
+Driver copies all packets below or equaling this size to a fresh Rx
+buffer before handing it up the stack.
+
+This parameter is different than other parameters, in that it is a
+single (not 1,1,1 etc.) parameter applied to all driver instances and
+it is also available during runtime at
+/sys/module/e1000/parameters/copybreak
+
+SmartPowerDownEnable
+--------------------
+Valid Range: 0-1
+Default Value: 0 (disabled)
+
+Allows PHY to turn off in lower power states. The user can turn off
+this parameter in supported chipsets.
+
+KumeranLockLoss
+---------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+This workaround skips resetting the PHY at shutdown for the initial
+silicon releases of ICH8 systems.
Speed and Duplex Configuration
==============================
@@ -385,40 +390,9 @@ If the link partner is forced to a specific speed and duplex, then this
parameter should not be used. Instead, use the Speed and Duplex parameters
previously mentioned to force the adapter to the same speed and duplex.
-
Additional Configurations
=========================
- Configuring the Driver on Different Distributions
- -------------------------------------------------
- Configuring a network driver to load properly when the system is started
- is distribution dependent. Typically, the configuration process involves
- adding an alias line to /etc/modules.conf or /etc/modprobe.conf as well
- as editing other system startup scripts and/or configuration files. Many
- popular Linux distributions ship with tools to make these changes for you.
- To learn the proper way to configure a network device for your system,
- refer to your distribution documentation. If during this process you are
- asked for the driver or module name, the name for the Linux Base Driver
- for the Intel(R) PRO/1000 Family of Adapters is e1000.
-
- As an example, if you install the e1000 driver for two PRO/1000 adapters
- (eth0 and eth1) and set the speed and duplex to 10full and 100half, add
- the following to modules.conf or or modprobe.conf:
-
- alias eth0 e1000
- alias eth1 e1000
- options e1000 Speed=10,100 Duplex=2,1
-
- Viewing Link Messages
- ---------------------
- Link messages will not be displayed to the console if the distribution is
- restricting system messages. In order to see network driver link messages
- on your console, set dmesg to eight by entering the following:
-
- dmesg -n 8
-
- NOTE: This setting is not saved across reboots.
-
Jumbo Frames
------------
Jumbo Frames support is enabled by changing the MTU to a value larger than
@@ -437,9 +411,11 @@ Additional Configurations
setting in a different location.
Notes:
-
- - To enable Jumbo Frames, increase the MTU size on the interface beyond
- 1500.
+ Degradation in throughput performance may be observed in some Jumbo frames
+ environments. If this is observed, increasing the application's socket buffer
+ size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help.
+ See the specific application manual and /usr/src/linux*/Documentation/
+ networking/ip-sysctl.txt for more details.
- The maximum MTU setting for Jumbo Frames is 16110. This value coincides
with the maximum Jumbo Frames size of 16128.
@@ -447,40 +423,11 @@ Additional Configurations
- Using Jumbo Frames at 10 or 100 Mbps may result in poor performance or
loss of link.
- - Some Intel gigabit adapters that support Jumbo Frames have a frame size
- limit of 9238 bytes, with a corresponding MTU size limit of 9216 bytes.
- The adapters with this limitation are based on the Intel(R) 82571EB,
- 82572EI, 82573L and 80003ES2LAN controller. These correspond to the
- following product names:
- Intel(R) PRO/1000 PT Server Adapter
- Intel(R) PRO/1000 PT Desktop Adapter
- Intel(R) PRO/1000 PT Network Connection
- Intel(R) PRO/1000 PT Dual Port Server Adapter
- Intel(R) PRO/1000 PT Dual Port Network Connection
- Intel(R) PRO/1000 PF Server Adapter
- Intel(R) PRO/1000 PF Network Connection
- Intel(R) PRO/1000 PF Dual Port Server Adapter
- Intel(R) PRO/1000 PB Server Connection
- Intel(R) PRO/1000 PL Network Connection
- Intel(R) PRO/1000 EB Network Connection with I/O Acceleration
- Intel(R) PRO/1000 EB Backplane Connection with I/O Acceleration
- Intel(R) PRO/1000 PT Quad Port Server Adapter
-
- Adapters based on the Intel(R) 82542 and 82573V/E controller do not
support Jumbo Frames. These correspond to the following product names:
Intel(R) PRO/1000 Gigabit Server Adapter
Intel(R) PRO/1000 PM Network Connection
- - The following adapters do not support Jumbo Frames:
- Intel(R) 82562V 10/100 Network Connection
- Intel(R) 82566DM Gigabit Network Connection
- Intel(R) 82566DC Gigabit Network Connection
- Intel(R) 82566MM Gigabit Network Connection
- Intel(R) 82566MC Gigabit Network Connection
- Intel(R) 82562GT 10/100 Network Connection
- Intel(R) 82562G 10/100 Network Connection
-
-
Ethtool
-------
The driver utilizes the ethtool interface for driver configuration and
@@ -490,142 +437,14 @@ Additional Configurations
The latest release of ethtool can be found from
http://sourceforge.net/projects/gkernel.
- NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support
- for a more complete ethtool feature set can be enabled by upgrading
- ethtool to ethtool-1.8.1.
-
Enabling Wake on LAN* (WoL)
---------------------------
- WoL is configured through the Ethtool* utility. Ethtool is included with
- all versions of Red Hat after Red Hat 7.2. For other Linux distributions,
- download and install Ethtool from the following website:
- http://sourceforge.net/projects/gkernel.
-
- For instructions on enabling WoL with Ethtool, refer to the website listed
- above.
+ WoL is configured through the Ethtool* utility.
WoL will be enabled on the system during the next shut down or reboot.
For this driver version, in order to enable WoL, the e1000 driver must be
loaded when shutting down or rebooting the system.
- Wake On LAN is only supported on port A for the following devices:
- Intel(R) PRO/1000 PT Dual Port Network Connection
- Intel(R) PRO/1000 PT Dual Port Server Connection
- Intel(R) PRO/1000 PT Dual Port Server Adapter
- Intel(R) PRO/1000 PF Dual Port Server Adapter
- Intel(R) PRO/1000 PT Quad Port Server Adapter
-
- NAPI
- ----
- NAPI (Rx polling mode) is enabled in the e1000 driver.
-
- See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
-
-
-Known Issues
-============
-
-Dropped Receive Packets on Half-duplex 10/100 Networks
-------------------------------------------------------
-If you have an Intel PCI Express adapter running at 10mbps or 100mbps, half-
-duplex, you may observe occasional dropped receive packets. There are no
-workarounds for this problem in this network configuration. The network must
-be updated to operate in full-duplex, and/or 1000mbps only.
-
-Jumbo Frames System Requirement
--------------------------------
-Memory allocation failures have been observed on Linux systems with 64 MB
-of RAM or less that are running Jumbo Frames. If you are using Jumbo
-Frames, your system may require more than the advertised minimum
-requirement of 64 MB of system memory.
-
-Performance Degradation with Jumbo Frames
------------------------------------------
-Degradation in throughput performance may be observed in some Jumbo frames
-environments. If this is observed, increasing the application's socket
-buffer size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values
-may help. See the specific application manual and
-/usr/src/linux*/Documentation/
-networking/ip-sysctl.txt for more details.
-
-Jumbo Frames on Foundry BigIron 8000 switch
--------------------------------------------
-There is a known issue using Jumbo frames when connected to a Foundry
-BigIron 8000 switch. This is a 3rd party limitation. If you experience
-loss of packets, lower the MTU size.
-
-Allocating Rx Buffers when Using Jumbo Frames
----------------------------------------------
-Allocating Rx buffers when using Jumbo Frames on 2.6.x kernels may fail if
-the available memory is heavily fragmented. This issue may be seen with PCI-X
-adapters or with packet split disabled. This can be reduced or eliminated
-by changing the amount of available memory for receive buffer allocation, by
-increasing /proc/sys/vm/min_free_kbytes.
-
-Multiple Interfaces on Same Ethernet Broadcast Network
-------------------------------------------------------
-Due to the default ARP behavior on Linux, it is not possible to have
-one system on two IP networks in the same Ethernet broadcast domain
-(non-partitioned switch) behave as expected. All Ethernet interfaces
-will respond to IP traffic for any IP address assigned to the system.
-This results in unbalanced receive traffic.
-
-If you have multiple interfaces in a server, either turn on ARP
-filtering by entering:
-
- echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
-(this only works if your kernel's version is higher than 2.4.5),
-
-NOTE: This setting is not saved across reboots. The configuration
-change can be made permanent by adding the line:
- net.ipv4.conf.all.arp_filter = 1
-to the file /etc/sysctl.conf
-
- or,
-
-install the interfaces in separate broadcast domains (either in
-different switches or in a switch partitioned to VLANs).
-
-82541/82547 can't link or are slow to link with some link partners
------------------------------------------------------------------
-There is a known compatibility issue with 82541/82547 and some
-low-end switches where the link will not be established, or will
-be slow to establish. In particular, these switches are known to
-be incompatible with 82541/82547:
-
- Planex FXG-08TE
- I-O Data ETG-SH8
-
-To workaround this issue, the driver can be compiled with an override
-of the PHY's master/slave setting. Forcing master or forcing slave
-mode will improve time-to-link.
-
- # make CFLAGS_EXTRA=-DE1000_MASTER_SLAVE=<n>
-
-Where <n> is:
-
- 0 = Hardware default
- 1 = Master mode
- 2 = Slave mode
- 3 = Auto master/slave
-
-Disable rx flow control with ethtool
-------------------------------------
-In order to disable receive flow control using ethtool, you must turn
-off auto-negotiation on the same command line.
-
-For example:
-
- ethtool -A eth? autoneg off rx off
-
-Unplugging network cable while ethtool -p is running
-----------------------------------------------------
-In kernel versions 2.5.50 and later (including 2.6 kernel), unplugging
-the network cable while ethtool -p is running will cause the system to
-become unresponsive to keyboard commands, except for control-alt-delete.
-Restarting the system appears to be the only remedy.
-
-
Support
=======
diff --git a/Documentation/networking/e1000e.txt b/Documentation/networking/e1000e.txt
new file mode 100644
index 00000000000..6aa048badf3
--- /dev/null
+++ b/Documentation/networking/e1000e.txt
@@ -0,0 +1,302 @@
+Linux* Driver for Intel(R) Network Connection
+===============================================================
+
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
+
+Contents
+========
+
+- Identifying Your Adapter
+- Command Line Parameters
+- Additional Configurations
+- Support
+
+Identifying Your Adapter
+========================
+
+The e1000e driver supports all PCI Express Intel(R) Gigabit Network
+Connections, except those that are 82575, 82576 and 82580-based*.
+
+* NOTE: The Intel(R) PRO/1000 P Dual Port Server Adapter is supported by
+ the e1000 driver, not the e1000e driver due to the 82546 part being used
+ behind a PCI Express bridge.
+
+For more information on how to identify your adapter, go to the Adapter &
+Driver ID Guide at:
+
+ http://support.intel.com/support/go/network/adapter/idguide.htm
+
+For the latest Intel network drivers for Linux, refer to the following
+website. In the search field, enter your adapter name or type, or use the
+networking link on the left to search for your adapter:
+
+ http://support.intel.com/support/go/network/adapter/home.htm
+
+Command Line Parameters
+=======================
+
+The default value for each parameter is generally the recommended setting,
+unless otherwise noted.
+
+NOTES: For more information about the InterruptThrottleRate,
+ RxIntDelay, TxIntDelay, RxAbsIntDelay, and TxAbsIntDelay
+ parameters, see the application note at:
+ http://www.intel.com/design/network/applnots/ap450.htm
+
+InterruptThrottleRate
+---------------------
+Valid Range: 0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative,
+ 4=simplified balancing)
+Default Value: 3
+
+The driver can limit the amount of interrupts per second that the adapter
+will generate for incoming packets. It does this by writing a value to the
+adapter that is based on the maximum amount of interrupts that the adapter
+will generate per second.
+
+Setting InterruptThrottleRate to a value greater or equal to 100
+will program the adapter to send out a maximum of that many interrupts
+per second, even if more packets have come in. This reduces interrupt
+load on the system and can lower CPU utilization under heavy load,
+but will increase latency as packets are not processed as quickly.
+
+The driver has two adaptive modes (setting 1 or 3) in which
+it dynamically adjusts the InterruptThrottleRate value based on the traffic
+that it receives. After determining the type of incoming traffic in the last
+timeframe, it will adjust the InterruptThrottleRate to an appropriate value
+for that traffic.
+
+The algorithm classifies the incoming traffic every interval into
+classes. Once the class is determined, the InterruptThrottleRate value is
+adjusted to suit that traffic type the best. There are three classes defined:
+"Bulk traffic", for large amounts of packets of normal size; "Low latency",
+for small amounts of traffic and/or a significant percentage of small
+packets; and "Lowest latency", for almost completely small packets or
+minimal traffic.
+
+In dynamic conservative mode, the InterruptThrottleRate value is set to 4000
+for traffic that falls in class "Bulk traffic". If traffic falls in the "Low
+latency" or "Lowest latency" class, the InterruptThrottleRate is increased
+stepwise to 20000. This default mode is suitable for most applications.
+
+For situations where low latency is vital such as cluster or
+grid computing, the algorithm can reduce latency even more when
+InterruptThrottleRate is set to mode 1. In this mode, which operates
+the same as mode 3, the InterruptThrottleRate will be increased stepwise to
+70000 for traffic in class "Lowest latency".
+
+In simplified mode the interrupt rate is based on the ratio of Tx and
+Rx traffic. If the bytes per second rate is approximately equal the
+interrupt rate will drop as low as 2000 interrupts per second. If the
+traffic is mostly transmit or mostly receive, the interrupt rate could
+be as high as 8000.
+
+Setting InterruptThrottleRate to 0 turns off any interrupt moderation
+and may improve small packet latency, but is generally not suitable
+for bulk throughput traffic.
+
+NOTE: InterruptThrottleRate takes precedence over the TxAbsIntDelay and
+ RxAbsIntDelay parameters. In other words, minimizing the receive
+ and/or transmit absolute delays does not force the controller to
+ generate more interrupts than what the Interrupt Throttle Rate
+ allows.
+
+NOTE: When e1000e is loaded with default settings and multiple adapters
+ are in use simultaneously, the CPU utilization may increase non-
+ linearly. In order to limit the CPU utilization without impacting
+ the overall throughput, we recommend that you load the driver as
+ follows:
+
+ modprobe e1000e InterruptThrottleRate=3000,3000,3000
+
+ This sets the InterruptThrottleRate to 3000 interrupts/sec for
+ the first, second, and third instances of the driver. The range
+ of 2000 to 3000 interrupts per second works on a majority of
+ systems and is a good starting point, but the optimal value will
+ be platform-specific. If CPU utilization is not a concern, use
+ RX_POLLING (NAPI) and default driver settings.
+
+RxIntDelay
+----------
+Valid Range: 0-65535 (0=off)
+Default Value: 0
+
+This value delays the generation of receive interrupts in units of 1.024
+microseconds. Receive interrupt reduction can improve CPU efficiency if
+properly tuned for specific network traffic. Increasing this value adds
+extra latency to frame reception and can end up decreasing the throughput
+of TCP traffic. If the system is reporting dropped receives, this value
+may be set too high, causing the driver to run out of available receive
+descriptors.
+
+CAUTION: When setting RxIntDelay to a value other than 0, adapters may
+ hang (stop transmitting) under certain network conditions. If
+ this occurs a NETDEV WATCHDOG message is logged in the system
+ event log. In addition, the controller is automatically reset,
+ restoring the network connection. To eliminate the potential
+ for the hang ensure that RxIntDelay is set to 0.
+
+RxAbsIntDelay
+-------------
+Valid Range: 0-65535 (0=off)
+Default Value: 8
+
+This value, in units of 1.024 microseconds, limits the delay in which a
+receive interrupt is generated. Useful only if RxIntDelay is non-zero,
+this value ensures that an interrupt is generated after the initial
+packet is received within the set amount of time. Proper tuning,
+along with RxIntDelay, may improve traffic throughput in specific network
+conditions.
+
+TxIntDelay
+----------
+Valid Range: 0-65535 (0=off)
+Default Value: 8
+
+This value delays the generation of transmit interrupts in units of
+1.024 microseconds. Transmit interrupt reduction can improve CPU
+efficiency if properly tuned for specific network traffic. If the
+system is reporting dropped transmits, this value may be set too high
+causing the driver to run out of available transmit descriptors.
+
+TxAbsIntDelay
+-------------
+Valid Range: 0-65535 (0=off)
+Default Value: 32
+
+This value, in units of 1.024 microseconds, limits the delay in which a
+transmit interrupt is generated. Useful only if TxIntDelay is non-zero,
+this value ensures that an interrupt is generated after the initial
+packet is sent on the wire within the set amount of time. Proper tuning,
+along with TxIntDelay, may improve traffic throughput in specific
+network conditions.
+
+Copybreak
+---------
+Valid Range: 0-xxxxxxx (0=off)
+Default Value: 256
+
+Driver copies all packets below or equaling this size to a fresh Rx
+buffer before handing it up the stack.
+
+This parameter is different than other parameters, in that it is a
+single (not 1,1,1 etc.) parameter applied to all driver instances and
+it is also available during runtime at
+/sys/module/e1000e/parameters/copybreak
+
+SmartPowerDownEnable
+--------------------
+Valid Range: 0-1
+Default Value: 0 (disabled)
+
+Allows PHY to turn off in lower power states. The user can set this parameter
+in supported chipsets.
+
+KumeranLockLoss
+---------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+This workaround skips resetting the PHY at shutdown for the initial
+silicon releases of ICH8 systems.
+
+IntMode
+-------
+Valid Range: 0-2 (0=legacy, 1=MSI, 2=MSI-X)
+Default Value: 2
+
+Allows changing the interrupt mode at module load time, without requiring a
+recompile. If the driver load fails to enable a specific interrupt mode, the
+driver will try other interrupt modes, from least to most compatible. The
+interrupt order is MSI-X, MSI, Legacy. If specifying MSI (IntMode=1)
+interrupts, only MSI and Legacy will be attempted.
+
+CrcStripping
+------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+Strip the CRC from received packets before sending up the network stack. If
+you have a machine with a BMC enabled but cannot receive IPMI traffic after
+loading or enabling the driver, try disabling this feature.
+
+WriteProtectNVM
+---------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+Set the hardware to ignore all write/erase cycles to the GbE region in the
+ICHx NVM (non-volatile memory). This feature can be disabled by the
+WriteProtectNVM module parameter (enabled by default) only after a hardware
+reset, but the machine must be power cycled before trying to enable writes.
+
+Note: the kernel boot option iomem=relaxed may need to be set if the kernel
+config option CONFIG_STRICT_DEVMEM=y, if the root user wants to write the
+NVM from user space via ethtool.
+
+Additional Configurations
+=========================
+
+ Jumbo Frames
+ ------------
+ Jumbo Frames support is enabled by changing the MTU to a value larger than
+ the default of 1500. Use the ifconfig command to increase the MTU size.
+ For example:
+
+ ifconfig eth<x> mtu 9000 up
+
+ This setting is not saved across reboots.
+
+ Notes:
+
+ - The maximum MTU setting for Jumbo Frames is 9216. This value coincides
+ with the maximum Jumbo Frames size of 9234 bytes.
+
+ - Using Jumbo Frames at 10 or 100 Mbps is not supported and may result in
+ poor performance or loss of link.
+
+ - Some adapters limit Jumbo Frames sized packets to a maximum of
+ 4096 bytes and some adapters do not support Jumbo Frames.
+
+
+ Ethtool
+ -------
+ The driver utilizes the ethtool interface for driver configuration and
+ diagnostics, as well as displaying statistical information. We
+ strongly recommend downloading the latest version of Ethtool at:
+
+ http://sourceforge.net/projects/gkernel.
+
+ Speed and Duplex
+ ----------------
+ Speed and Duplex are configured through the Ethtool* utility. For
+ instructions, refer to the Ethtool man page.
+
+ Enabling Wake on LAN* (WoL)
+ ---------------------------
+ WoL is configured through the Ethtool* utility. For instructions on
+ enabling WoL with Ethtool, refer to the Ethtool man page.
+
+ WoL will be enabled on the system during the next shut down or reboot.
+ For this driver version, in order to enable WoL, the e1000e driver must be
+ loaded when shutting down or rebooting the system.
+
+ In most cases Wake On LAN is only supported on port A for multiple port
+ adapters. To verify if a port supports Wake on LAN run ethtool eth<X>.
+
+
+Support
+=======
+
+For general information, go to the Intel support website at:
+
+ www.intel.com/support/
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+ http://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on the supported
+kernel with a supported adapter, email the specific information related
+to the issue to e1000-devel@lists.sf.net
diff --git a/Documentation/networking/fore200e.txt b/Documentation/networking/fore200e.txt
index b1f337f0f4c..6e0d2a9613e 100644
--- a/Documentation/networking/fore200e.txt
+++ b/Documentation/networking/fore200e.txt
@@ -39,7 +39,7 @@ version. Alternative binary firmware images can be found somewhere on the
ForeThought CD-ROM supplied with your adapter by FORE Systems.
You can also get the latest firmware images from FORE Systems at
-http://www.fore.com. Register TACTics Online and go to
+http://en.wikipedia.org/wiki/FORE_Systems. Register TACTics Online and go to
the 'software updates' pages. The firmware binaries are part of
the various ForeThought software distributions.
diff --git a/Documentation/networking/ifenslave.c b/Documentation/networking/ifenslave.c
index 1b96ccda383..2bac9618c34 100644
--- a/Documentation/networking/ifenslave.c
+++ b/Documentation/networking/ifenslave.c
@@ -756,7 +756,7 @@ static int enslave(char *master_ifname, char *slave_ifname)
*/
if (abi_ver < 1) {
/* For old ABI, the master needs to be
- * down before setting it's hwaddr
+ * down before setting its hwaddr
*/
res = set_if_down(master_ifname, master_flags.ifr_flags);
if (res) {
diff --git a/Documentation/networking/igb.txt b/Documentation/networking/igb.txt
new file mode 100644
index 00000000000..ab2d7183189
--- /dev/null
+++ b/Documentation/networking/igb.txt
@@ -0,0 +1,132 @@
+Linux* Base Driver for Intel(R) Network Connection
+==================================================
+
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
+
+Contents
+========
+
+- Identifying Your Adapter
+- Additional Configurations
+- Support
+
+Identifying Your Adapter
+========================
+
+This driver supports all 82575, 82576 and 82580-based Intel (R) gigabit network
+connections.
+
+For specific information on how to identify your adapter, go to the Adapter &
+Driver ID Guide at:
+
+ http://support.intel.com/support/go/network/adapter/idguide.htm
+
+Command Line Parameters
+=======================
+
+The default value for each parameter is generally the recommended setting,
+unless otherwise noted.
+
+max_vfs
+-------
+Valid Range: 0-7
+Default Value: 0
+
+This parameter adds support for SR-IOV. It causes the driver to spawn up to
+max_vfs worth of virtual function.
+
+Additional Configurations
+=========================
+
+ Jumbo Frames
+ ------------
+ Jumbo Frames support is enabled by changing the MTU to a value larger than
+ the default of 1500. Use the ifconfig command to increase the MTU size.
+ For example:
+
+ ifconfig eth<x> mtu 9000 up
+
+ This setting is not saved across reboots.
+
+ Notes:
+
+ - The maximum MTU setting for Jumbo Frames is 9216. This value coincides
+ with the maximum Jumbo Frames size of 9234 bytes.
+
+ - Using Jumbo Frames at 10 or 100 Mbps may result in poor performance or
+ loss of link.
+
+ Ethtool
+ -------
+ The driver utilizes the ethtool interface for driver configuration and
+ diagnostics, as well as displaying statistical information.
+
+ http://sourceforge.net/projects/gkernel.
+
+ Enabling Wake on LAN* (WoL)
+ ---------------------------
+ WoL is configured through the Ethtool* utility.
+
+ For instructions on enabling WoL with Ethtool, refer to the Ethtool man page.
+
+ WoL will be enabled on the system during the next shut down or reboot.
+ For this driver version, in order to enable WoL, the igb driver must be
+ loaded when shutting down or rebooting the system.
+
+ Wake On LAN is only supported on port A of multi-port adapters.
+
+ Wake On LAN is not supported for the Intel(R) Gigabit VT Quad Port Server
+ Adapter.
+
+ Multiqueue
+ ----------
+ In this mode, a separate MSI-X vector is allocated for each queue and one
+ for "other" interrupts such as link status change and errors. All
+ interrupts are throttled via interrupt moderation. Interrupt moderation
+ must be used to avoid interrupt storms while the driver is processing one
+ interrupt. The moderation value should be at least as large as the expected
+ time for the driver to process an interrupt. Multiqueue is off by default.
+
+ REQUIREMENTS: MSI-X support is required for Multiqueue. If MSI-X is not
+ found, the system will fallback to MSI or to Legacy interrupts.
+
+ LRO
+ ---
+ Large Receive Offload (LRO) is a technique for increasing inbound throughput
+ of high-bandwidth network connections by reducing CPU overhead. It works by
+ aggregating multiple incoming packets from a single stream into a larger
+ buffer before they are passed higher up the networking stack, thus reducing
+ the number of packets that have to be processed. LRO combines multiple
+ Ethernet frames into a single receive in the stack, thereby potentially
+ decreasing CPU utilization for receives.
+
+ NOTE: You need to have inet_lro enabled via either the CONFIG_INET_LRO or
+ CONFIG_INET_LRO_MODULE kernel config option. Additionally, if
+ CONFIG_INET_LRO_MODULE is used, the inet_lro module needs to be loaded
+ before the igb driver.
+
+ You can verify that the driver is using LRO by looking at these counters in
+ Ethtool:
+
+ lro_aggregated - count of total packets that were combined
+ lro_flushed - counts the number of packets flushed out of LRO
+ lro_no_desc - counts the number of times an LRO descriptor was not available
+ for the LRO packet
+
+ NOTE: IPv6 and UDP are not supported by LRO.
+
+Support
+=======
+
+For general information, go to the Intel support website at:
+
+ www.intel.com/support/
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+ http://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on the supported
+kernel with a supported adapter, email the specific information related
+to the issue to e1000-devel@lists.sf.net
diff --git a/Documentation/networking/igbvf.txt b/Documentation/networking/igbvf.txt
new file mode 100644
index 00000000000..056028138d9
--- /dev/null
+++ b/Documentation/networking/igbvf.txt
@@ -0,0 +1,78 @@
+Linux* Base Driver for Intel(R) Network Connection
+==================================================
+
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
+
+Contents
+========
+
+- Identifying Your Adapter
+- Additional Configurations
+- Support
+
+This file describes the igbvf Linux* Base Driver for Intel Network Connection.
+
+The igbvf driver supports 82576-based virtual function devices that can only
+be activated on kernels that support SR-IOV. SR-IOV requires the correct
+platform and OS support.
+
+The igbvf driver requires the igb driver, version 2.0 or later. The igbvf
+driver supports virtual functions generated by the igb driver with a max_vfs
+value of 1 or greater. For more information on the max_vfs parameter refer
+to the README included with the igb driver.
+
+The guest OS loading the igbvf driver must support MSI-X interrupts.
+
+This driver is only supported as a loadable module at this time. Intel is
+not supplying patches against the kernel source to allow for static linking
+of the driver. For questions related to hardware requirements, refer to the
+documentation supplied with your Intel Gigabit adapter. All hardware
+requirements listed apply to use with Linux.
+
+Instructions on updating ethtool can be found in the section "Additional
+Configurations" later in this document.
+
+VLANs: There is a limit of a total of 32 shared VLANs to 1 or more VFs.
+
+Identifying Your Adapter
+========================
+
+The igbvf driver supports 82576-based virtual function devices that can only
+be activated on kernels that support SR-IOV.
+
+For more information on how to identify your adapter, go to the Adapter &
+Driver ID Guide at:
+
+ http://support.intel.com/support/go/network/adapter/idguide.htm
+
+For the latest Intel network drivers for Linux, refer to the following
+website. In the search field, enter your adapter name or type, or use the
+networking link on the left to search for your adapter:
+
+ http://downloadcenter.intel.com/scripts-df-external/Support_Intel.aspx
+
+Additional Configurations
+=========================
+
+ Ethtool
+ -------
+ The driver utilizes the ethtool interface for driver configuration and
+ diagnostics, as well as displaying statistical information.
+
+ http://sourceforge.net/projects/gkernel.
+
+Support
+=======
+
+For general information, go to the Intel support website at:
+
+ http://support.intel.com
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+ http://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on the supported
+kernel with a supported adapter, email the specific information related
+to the issue to e1000-devel@lists.sf.net
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 006b39dec87..f350c69b2bb 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -487,6 +487,30 @@ tcp_dma_copybreak - INTEGER
and CONFIG_NET_DMA is enabled.
Default: 4096
+tcp_thin_linear_timeouts - BOOLEAN
+ Enable dynamic triggering of linear timeouts for thin streams.
+ If set, a check is performed upon retransmission by timeout to
+ determine if the stream is thin (less than 4 packets in flight).
+ As long as the stream is found to be thin, up to 6 linear
+ timeouts may be performed before exponential backoff mode is
+ initiated. This improves retransmission latency for
+ non-aggressive thin streams, often found to be time-dependent.
+ For more information on thin streams, see
+ Documentation/networking/tcp-thin.txt
+ Default: 0
+
+tcp_thin_dupack - BOOLEAN
+ Enable dynamic triggering of retransmissions after one dupACK
+ for thin streams. If set, a check is performed upon reception
+ of a dupACK to determine if the stream is thin (less than 4
+ packets in flight). As long as the stream is found to be thin,
+ data is retransmitted on the first received dupACK. This
+ improves retransmission latency for non-aggressive thin
+ streams, often found to be time-dependent.
+ For more information on thin streams, see
+ Documentation/networking/tcp-thin.txt
+ Default: 0
+
UDP variables:
udp_mem - vector of 3 INTEGERs: min, pressure, max
@@ -564,6 +588,37 @@ ip_local_port_range - 2 INTEGERS
(i.e. by default) range 1024-4999 is enough to issue up to
2000 connections per second to systems supporting timestamps.
+ip_local_reserved_ports - list of comma separated ranges
+ Specify the ports which are reserved for known third-party
+ applications. These ports will not be used by automatic port
+ assignments (e.g. when calling connect() or bind() with port
+ number 0). Explicit port allocation behavior is unchanged.
+
+ The format used for both input and output is a comma separated
+ list of ranges (e.g. "1,2-4,10-10" for ports 1, 2, 3, 4 and
+ 10). Writing to the file will clear all previously reserved
+ ports and update the current list with the one given in the
+ input.
+
+ Note that ip_local_port_range and ip_local_reserved_ports
+ settings are independent and both are considered by the kernel
+ when determining which ports are available for automatic port
+ assignments.
+
+ You can reserve ports which are not in the current
+ ip_local_port_range, e.g.:
+
+ $ cat /proc/sys/net/ipv4/ip_local_port_range
+ 32000 61000
+ $ cat /proc/sys/net/ipv4/ip_local_reserved_ports
+ 8080,9148
+
+ although this is redundant. However such a setting is useful
+ if later the port range is changed to a value that will
+ include the reserved ports.
+
+ Default: Empty
+
ip_nonlocal_bind - BOOLEAN
If set, allows processes to bind() to non-local IP addresses,
which can be quite useful - but may break some applications.
@@ -692,6 +747,25 @@ proxy_arp - BOOLEAN
conf/{all,interface}/proxy_arp is set to TRUE,
it will be disabled otherwise
+proxy_arp_pvlan - BOOLEAN
+ Private VLAN proxy arp.
+ Basically allow proxy arp replies back to the same interface
+ (from which the ARP request/solicitation was received).
+
+ This is done to support (ethernet) switch features, like RFC
+ 3069, where the individual ports are NOT allowed to
+ communicate with each other, but they are allowed to talk to
+ the upstream router. As described in RFC 3069, it is possible
+ to allow these hosts to communicate through the upstream
+ router by proxy_arp'ing. Don't need to be used together with
+ proxy_arp.
+
+ This technology is known by different names:
+ In RFC 3069 it is called VLAN Aggregation.
+ Cisco and Allied Telesyn call it Private VLAN.
+ Hewlett-Packard call it Source-Port filtering or port-isolation.
+ Ericsson call it MAC-Forced Forwarding (RFC Draft).
+
shared_media - BOOLEAN
Send(router) or accept(host) RFC1620 shared media redirects.
Overrides ip_secure_redirects.
@@ -829,13 +903,22 @@ arp_ignore - INTEGER
arp_notify - BOOLEAN
Define mode for notification of address and device changes.
0 - (default): do nothing
- 1 - Generate gratuitous arp replies when device is brought up
+ 1 - Generate gratuitous arp requests when device is brought up
or hardware address changes.
arp_accept - BOOLEAN
- Define behavior when gratuitous arp replies are received:
- 0 - drop gratuitous arp frames
- 1 - accept gratuitous arp frames
+ Define behavior for gratuitous ARP frames who's IP is not
+ already present in the ARP table:
+ 0 - don't create new entries in the ARP table
+ 1 - create new entries in the ARP table
+
+ Both replies and requests type gratuitous arp will trigger the
+ ARP table to be updated, if this setting is on.
+
+ If the ARP table already contains the IP address of the
+ gratuitous arp frame, the arp table will be updated regardless
+ if this setting is on or off.
+
app_solicit - INTEGER
The maximum number of probes to send to the user space ARP daemon
@@ -1074,10 +1157,10 @@ regen_max_retry - INTEGER
Default: 5
max_addresses - INTEGER
- Number of maximum addresses per interface. 0 disables limitation.
- It is recommended not set too large value (or 0) because it would
- be too easy way to crash kernel to allow to create too much of
- autoconfigured addresses.
+ Maximum number of autoconfigured addresses per interface. Setting
+ to zero disables the limitation. It is not recommended to set this
+ value too large (or to zero) because it would be an easy way to
+ crash the kernel by allowing too many addresses to be created.
Default: 16
disable_ipv6 - BOOLEAN
diff --git a/Documentation/networking/ipddp.txt b/Documentation/networking/ipddp.txt
index 661a5558dd8..ba5c217fffe 100644
--- a/Documentation/networking/ipddp.txt
+++ b/Documentation/networking/ipddp.txt
@@ -36,11 +36,6 @@ AppleTalk-IP to IP decapsulation.
Basic instructions for user space tools
=======================================
-To enable AppleTalk-IP decapsulation/encapsulation you will need the
-proper tools. You can get the tools for decapsulation from
-http://spacs1.spacs.k12.wi.us/~jschlst/index.html and for encapsulation
-from http://www.maths.unm.edu/~bradford/ltpc.html
-
I will briefly describe the operation of the tools, but you will
need to consult the supporting documentation for each set of tools.
diff --git a/Documentation/networking/iphase.txt b/Documentation/networking/iphase.txt
index 55eac4a784e..670b72f1658 100644
--- a/Documentation/networking/iphase.txt
+++ b/Documentation/networking/iphase.txt
@@ -22,7 +22,7 @@ The features and limitations of this driver are as follows:
- All variants of Interphase ATM PCI (i)Chip adapter cards are supported,
including x575 (OC3, control memory 128K , 512K and packet memory 128K,
512K and 1M), x525 (UTP25) and x531 (DS3 and E3). See
- http://www.iphase.com/site/iphase-web/?epi_menuItemID=e196f04b4b3b40502f150882e21046a0
+ http://www.iphase.com/
for details.
- Only x86 platforms are supported.
- SMP is supported.
diff --git a/Documentation/networking/ixgbevf.txt b/Documentation/networking/ixgbevf.txt
new file mode 100644
index 00000000000..21dd5d15b6b
--- /dev/null
+++ b/Documentation/networking/ixgbevf.txt
@@ -0,0 +1,56 @@
+Linux* Base Driver for Intel(R) Network Connection
+==================================================
+
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
+
+Contents
+========
+
+- Identifying Your Adapter
+- Known Issues/Troubleshooting
+- Support
+
+This file describes the ixgbevf Linux* Base Driver for Intel Network
+Connection.
+
+The ixgbevf driver supports 82599-based virtual function devices that can only
+be activated on kernels with CONFIG_PCI_IOV enabled.
+
+The ixgbevf driver supports virtual functions generated by the ixgbe driver
+with a max_vfs value of 1 or greater.
+
+The guest OS loading the ixgbevf driver must support MSI-X interrupts.
+
+VLANs: There is a limit of a total of 32 shared VLANs to 1 or more VFs.
+
+Identifying Your Adapter
+========================
+
+For more information on how to identify your adapter, go to the Adapter &
+Driver ID Guide at:
+
+ http://support.intel.com/support/go/network/adapter/idguide.htm
+
+Known Issues/Troubleshooting
+============================
+
+ Unloading Physical Function (PF) Driver Causes System Reboots When VM is
+ Running and VF is Loaded on the VM
+ ------------------------------------------------------------------------
+ Do not unload the PF driver (ixgbe) while VFs are assigned to guests.
+
+Support
+=======
+
+For general information, go to the Intel support website at:
+
+ http://support.intel.com
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+ http://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on the supported
+kernel with a supported adapter, email the specific information related
+to the issue to e1000-devel@lists.sf.net
diff --git a/Documentation/networking/l2tp.txt b/Documentation/networking/l2tp.txt
index 63214b280e0..e7bf3979fac 100644
--- a/Documentation/networking/l2tp.txt
+++ b/Documentation/networking/l2tp.txt
@@ -1,44 +1,95 @@
-This brief document describes how to use the kernel's PPPoL2TP driver
-to provide L2TP functionality. L2TP is a protocol that tunnels one or
-more PPP sessions over a UDP tunnel. It is commonly used for VPNs
+This document describes how to use the kernel's L2TP drivers to
+provide L2TP functionality. L2TP is a protocol that tunnels one or
+more sessions over an IP tunnel. It is commonly used for VPNs
(L2TP/IPSec) and by ISPs to tunnel subscriber PPP sessions over an IP
-network infrastructure.
+network infrastructure. With L2TPv3, it is also useful as a Layer-2
+tunneling infrastructure.
+
+Features
+========
+
+L2TPv2 (PPP over L2TP (UDP tunnels)).
+L2TPv3 ethernet pseudowires.
+L2TPv3 PPP pseudowires.
+L2TPv3 IP encapsulation.
+Netlink sockets for L2TPv3 configuration management.
+
+History
+=======
+
+The original pppol2tp driver was introduced in 2.6.23 and provided
+L2TPv2 functionality (rfc2661). L2TPv2 is used to tunnel one or more PPP
+sessions over a UDP tunnel.
+
+L2TPv3 (rfc3931) changes the protocol to allow different frame types
+to be passed over an L2TP tunnel by moving the PPP-specific parts of
+the protocol out of the core L2TP packet headers. Each frame type is
+known as a pseudowire type. Ethernet, PPP, HDLC, Frame Relay and ATM
+pseudowires for L2TP are defined in separate RFC standards. Another
+change for L2TPv3 is that it can be carried directly over IP with no
+UDP header (UDP is optional). It is also possible to create static
+unmanaged L2TPv3 tunnels manually without a control protocol
+(userspace daemon) to manage them.
+
+To support L2TPv3, the original pppol2tp driver was split up to
+separate the L2TP and PPP functionality. Existing L2TPv2 userspace
+apps should be unaffected as the original pppol2tp sockets API is
+retained. L2TPv3, however, uses netlink to manage L2TPv3 tunnels and
+sessions.
Design
======
-The PPPoL2TP driver, drivers/net/pppol2tp.c, provides a mechanism by
-which PPP frames carried through an L2TP session are passed through
-the kernel's PPP subsystem. The standard PPP daemon, pppd, handles all
-PPP interaction with the peer. PPP network interfaces are created for
-each local PPP endpoint.
-
-The L2TP protocol http://www.faqs.org/rfcs/rfc2661.html defines L2TP
-control and data frames. L2TP control frames carry messages between
-L2TP clients/servers and are used to setup / teardown tunnels and
-sessions. An L2TP client or server is implemented in userspace and
-will use a regular UDP socket per tunnel. L2TP data frames carry PPP
-frames, which may be PPP control or PPP data. The kernel's PPP
+The L2TP protocol separates control and data frames. The L2TP kernel
+drivers handle only L2TP data frames; control frames are always
+handled by userspace. L2TP control frames carry messages between L2TP
+clients/servers and are used to setup / teardown tunnels and
+sessions. An L2TP client or server is implemented in userspace.
+
+Each L2TP tunnel is implemented using a UDP or L2TPIP socket; L2TPIP
+provides L2TPv3 IP encapsulation (no UDP) and is implemented using a
+new l2tpip socket family. The tunnel socket is typically created by
+userspace, though for unmanaged L2TPv3 tunnels, the socket can also be
+created by the kernel. Each L2TP session (pseudowire) gets a network
+interface instance. In the case of PPP, these interfaces are created
+indirectly by pppd using a pppol2tp socket. In the case of ethernet,
+the netdevice is created upon a netlink request to create an L2TPv3
+ethernet pseudowire.
+
+For PPP, the PPPoL2TP driver, net/l2tp/l2tp_ppp.c, provides a
+mechanism by which PPP frames carried through an L2TP session are
+passed through the kernel's PPP subsystem. The standard PPP daemon,
+pppd, handles all PPP interaction with the peer. PPP network
+interfaces are created for each local PPP endpoint. The kernel's PPP
subsystem arranges for PPP control frames to be delivered to pppd,
while data frames are forwarded as usual.
+For ethernet, the L2TPETH driver, net/l2tp/l2tp_eth.c, implements a
+netdevice driver, managing virtual ethernet devices, one per
+pseudowire. These interfaces can be managed using standard Linux tools
+such as "ip" and "ifconfig". If only IP frames are passed over the
+tunnel, the interface can be given an IP addresses of itself and its
+peer. If non-IP frames are to be passed over the tunnel, the interface
+can be added to a bridge using brctl. All L2TP datapath protocol
+functions are handled by the L2TP core driver.
+
Each tunnel and session within a tunnel is assigned a unique tunnel_id
and session_id. These ids are carried in the L2TP header of every
-control and data packet. The pppol2tp driver uses them to lookup
-internal tunnel and/or session contexts. Zero tunnel / session ids are
-treated specially - zero ids are never assigned to tunnels or sessions
-in the network. In the driver, the tunnel context keeps a pointer to
-the tunnel UDP socket. The session context keeps a pointer to the
-PPPoL2TP socket, as well as other data that lets the driver interface
-to the kernel PPP subsystem.
-
-Note that the pppol2tp kernel driver handles only L2TP data frames;
-L2TP control frames are simply passed up to userspace in the UDP
-tunnel socket. The kernel handles all datapath aspects of the
-protocol, including data packet resequencing (if enabled).
-
-There are a number of requirements on the userspace L2TP daemon in
-order to use the pppol2tp driver.
+control and data packet. (Actually, in L2TPv3, the tunnel_id isn't
+present in data frames - it is inferred from the IP connection on
+which the packet was received.) The L2TP driver uses the ids to lookup
+internal tunnel and/or session contexts to determine how to handle the
+packet. Zero tunnel / session ids are treated specially - zero ids are
+never assigned to tunnels or sessions in the network. In the driver,
+the tunnel context keeps a reference to the tunnel UDP or L2TPIP
+socket. The session context holds data that lets the driver interface
+to the kernel's network frame type subsystems, i.e. PPP, ethernet.
+
+Userspace Programming
+=====================
+
+For L2TPv2, there are a number of requirements on the userspace L2TP
+daemon in order to use the pppol2tp driver.
1. Use a UDP socket per tunnel.
@@ -86,6 +137,35 @@ In addition to the standard PPP ioctls, a PPPIOCGL2TPSTATS is provided
to retrieve tunnel and session statistics from the kernel using the
PPPoX socket of the appropriate tunnel or session.
+For L2TPv3, userspace must use the netlink API defined in
+include/linux/l2tp.h to manage tunnel and session contexts. The
+general procedure to create a new L2TP tunnel with one session is:-
+
+1. Open a GENL socket using L2TP_GENL_NAME for configuring the kernel
+ using netlink.
+
+2. Create a UDP or L2TPIP socket for the tunnel.
+
+3. Create a new L2TP tunnel using a L2TP_CMD_TUNNEL_CREATE
+ request. Set attributes according to desired tunnel parameters,
+ referencing the UDP or L2TPIP socket created in the previous step.
+
+4. Create a new L2TP session in the tunnel using a
+ L2TP_CMD_SESSION_CREATE request.
+
+The tunnel and all of its sessions are closed when the tunnel socket
+is closed. The netlink API may also be used to delete sessions and
+tunnels. Configuration and status info may be set or read using netlink.
+
+The L2TP driver also supports static (unmanaged) L2TPv3 tunnels. These
+are where there is no L2TP control message exchange with the peer to
+setup the tunnel; the tunnel is configured manually at each end of the
+tunnel. There is no need for an L2TP userspace application in this
+case -- the tunnel socket is created by the kernel and configured
+using parameters sent in the L2TP_CMD_TUNNEL_CREATE netlink
+request. The "ip" utility of iproute2 has commands for managing static
+L2TPv3 tunnels; do "ip l2tp help" for more information.
+
Debugging
=========
@@ -102,6 +182,69 @@ PPPOL2TP_MSG_CONTROL userspace - kernel interface
PPPOL2TP_MSG_SEQ sequence numbers handling
PPPOL2TP_MSG_DATA data packets
+If enabled, files under a l2tp debugfs directory can be used to dump
+kernel state about L2TP tunnels and sessions. To access it, the
+debugfs filesystem must first be mounted.
+
+# mount -t debugfs debugfs /debug
+
+Files under the l2tp directory can then be accessed.
+
+# cat /debug/l2tp/tunnels
+
+The debugfs files should not be used by applications to obtain L2TP
+state information because the file format is subject to change. It is
+implemented to provide extra debug information to help diagnose
+problems.) Users should use the netlink API.
+
+/proc/net/pppol2tp is also provided for backwards compaibility with
+the original pppol2tp driver. It lists information about L2TPv2
+tunnels and sessions only. Its use is discouraged.
+
+Unmanaged L2TPv3 Tunnels
+========================
+
+Some commercial L2TP products support unmanaged L2TPv3 ethernet
+tunnels, where there is no L2TP control protocol; tunnels are
+configured at each side manually. New commands are available in
+iproute2's ip utility to support this.
+
+To create an L2TPv3 ethernet pseudowire between local host 192.168.1.1
+and peer 192.168.1.2, using IP addresses 10.5.1.1 and 10.5.1.2 for the
+tunnel endpoints:-
+
+# modprobe l2tp_eth
+# modprobe l2tp_netlink
+
+# ip l2tp add tunnel tunnel_id 1 peer_tunnel_id 1 udp_sport 5000 \
+ udp_dport 5000 encap udp local 192.168.1.1 remote 192.168.1.2
+# ip l2tp add session tunnel_id 1 session_id 1 peer_session_id 1
+# ifconfig -a
+# ip addr add 10.5.1.2/32 peer 10.5.1.1/32 dev l2tpeth0
+# ifconfig l2tpeth0 up
+
+Choose IP addresses to be the address of a local IP interface and that
+of the remote system. The IP addresses of the l2tpeth0 interface can be
+anything suitable.
+
+Repeat the above at the peer, with ports, tunnel/session ids and IP
+addresses reversed. The tunnel and session IDs can be any non-zero
+32-bit number, but the values must be reversed at the peer.
+
+Host 1 Host2
+udp_sport=5000 udp_sport=5001
+udp_dport=5001 udp_dport=5000
+tunnel_id=42 tunnel_id=45
+peer_tunnel_id=45 peer_tunnel_id=42
+session_id=128 session_id=5196755
+peer_session_id=5196755 peer_session_id=128
+
+When done at both ends of the tunnel, it should be possible to send
+data over the network. e.g.
+
+# ping 10.5.1.1
+
+
Sample Userspace Code
=====================
@@ -158,12 +301,48 @@ Sample Userspace Code
}
return 0;
+Internal Implementation
+=======================
+
+The driver keeps a struct l2tp_tunnel context per L2TP tunnel and a
+struct l2tp_session context for each session. The l2tp_tunnel is
+always associated with a UDP or L2TP/IP socket and keeps a list of
+sessions in the tunnel. The l2tp_session context keeps kernel state
+about the session. It has private data which is used for data specific
+to the session type. With L2TPv2, the session always carried PPP
+traffic. With L2TPv3, the session can also carry ethernet frames
+(ethernet pseudowire) or other data types such as ATM, HDLC or Frame
+Relay.
+
+When a tunnel is first opened, the reference count on the socket is
+increased using sock_hold(). This ensures that the kernel socket
+cannot be removed while L2TP's data structures reference it.
+
+Some L2TP sessions also have a socket (PPP pseudowires) while others
+do not (ethernet pseudowires). We can't use the socket reference count
+as the reference count for session contexts. The L2TP implementation
+therefore has its own internal reference counts on the session
+contexts.
+
+To Do
+=====
+
+Add L2TP tunnel switching support. This would route tunneled traffic
+from one L2TP tunnel into another. Specified in
+http://tools.ietf.org/html/draft-ietf-l2tpext-tunnel-switching-08
+
+Add L2TPv3 VLAN pseudowire support.
+
+Add L2TPv3 IP pseudowire support.
+
+Add L2TPv3 ATM pseudowire support.
+
Miscellaneous
-============
+=============
-The PPPoL2TP driver was developed as part of the OpenL2TP project by
+The L2TP drivers were developed as part of the OpenL2TP project by
Katalix Systems Ltd. OpenL2TP is a full-featured L2TP client / server,
designed from the ground up to have the L2TP datapath in the
kernel. The project also implemented the pppol2tp plugin for pppd
which allows pppd to use the kernel driver. Details can be found at
-http://openl2tp.sourceforge.net.
+http://www.openl2tp.org.
diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt
index a22fd85e379..073894d1c09 100644
--- a/Documentation/networking/packet_mmap.txt
+++ b/Documentation/networking/packet_mmap.txt
@@ -2,13 +2,13 @@
+ ABSTRACT
--------------------------------------------------------------------------------
-This file documents the CONFIG_PACKET_MMAP option available with the PACKET
+This file documents the mmap() facility available with the PACKET
socket interface on 2.4 and 2.6 kernels. This type of sockets is used for
capture network traffic with utilities like tcpdump or any other that needs
raw access to network interface.
You can find the latest version of this document at:
- http://pusa.uv.es/~ulisses/packet_mmap/
+ http://wiki.ipxwarzone.com/index.php5?title=Linux_packet_mmap
Howto can be found at:
http://wiki.gnu-log.net (packet_mmap)
@@ -44,7 +44,7 @@ enabled. For transmission, check the MTU (Maximum Transmission Unit) used and
supported by devices of your network.
--------------------------------------------------------------------------------
-+ How to use CONFIG_PACKET_MMAP to improve capture process
++ How to use mmap() to improve capture process
--------------------------------------------------------------------------------
From the user standpoint, you should use the higher level libpcap library, which
@@ -56,7 +56,7 @@ support for PACKET_MMAP, and also probably the libpcap included in your distribu
I'm aware of two implementations of PACKET_MMAP in libpcap:
- http://pusa.uv.es/~ulisses/packet_mmap/ (by Simon Patarin, based on libpcap 0.6.2)
+ http://wiki.ipxwarzone.com/ (by Simon Patarin, based on libpcap 0.6.2)
http://public.lanl.gov/cpw/ (by Phil Wood, based on lastest libpcap)
The rest of this document is intended for people who want to understand
@@ -64,7 +64,7 @@ the low level details or want to improve libpcap by including PACKET_MMAP
support.
--------------------------------------------------------------------------------
-+ How to use CONFIG_PACKET_MMAP directly to improve capture process
++ How to use mmap() directly to improve capture process
--------------------------------------------------------------------------------
From the system calls stand point, the use of PACKET_MMAP involves
@@ -100,12 +100,12 @@ by the kernel.
The destruction of the socket and all associated resources
is done by a simple call to close(fd).
-Next I will describe PACKET_MMAP settings and it's constraints,
+Next I will describe PACKET_MMAP settings and its constraints,
also the mapping of the circular buffer in the user process and
the use of this buffer.
--------------------------------------------------------------------------------
-+ How to use CONFIG_PACKET_MMAP directly to improve transmission process
++ How to use mmap() directly to improve transmission process
--------------------------------------------------------------------------------
Transmission process is similar to capture as shown below.
@@ -432,7 +432,7 @@ TP_STATUS_LOSING : indicates there were packet drops from last time
the PACKET_STATISTICS option.
TP_STATUS_CSUMNOTREADY: currently it's used for outgoing IP packets which
- it's checksum will be done in hardware. So while
+ its checksum will be done in hardware. So while
reading the packet we should not try to check the
checksum.
@@ -493,6 +493,32 @@ The user can also use poll() to check if a buffer is available:
pfd.events = POLLOUT;
retval = poll(&pfd, 1, timeout);
+-------------------------------------------------------------------------------
++ PACKET_TIMESTAMP
+-------------------------------------------------------------------------------
+
+The PACKET_TIMESTAMP setting determines the source of the timestamp in
+the packet meta information. If your NIC is capable of timestamping
+packets in hardware, you can request those hardware timestamps to used.
+Note: you may need to enable the generation of hardware timestamps with
+SIOCSHWTSTAMP.
+
+PACKET_TIMESTAMP accepts the same integer bit field as
+SO_TIMESTAMPING. However, only the SOF_TIMESTAMPING_SYS_HARDWARE
+and SOF_TIMESTAMPING_RAW_HARDWARE values are recognized by
+PACKET_TIMESTAMP. SOF_TIMESTAMPING_SYS_HARDWARE takes precedence over
+SOF_TIMESTAMPING_RAW_HARDWARE if both bits are set.
+
+ int req = 0;
+ req |= SOF_TIMESTAMPING_SYS_HARDWARE;
+ setsockopt(fd, SOL_PACKET, PACKET_TIMESTAMP, (void *) &req, sizeof(req))
+
+If PACKET_TIMESTAMP is not set, a software timestamp generated inside
+the networking stack is used (the behavior before this setting was added).
+
+See include/linux/net_tstamp.h and Documentation/networking/timestamping
+for more information on hardware timestamps.
+
--------------------------------------------------------------------------------
+ THANKS
--------------------------------------------------------------------------------
diff --git a/Documentation/networking/pktgen.txt b/Documentation/networking/pktgen.txt
index 61bb645d50e..75e4fd708cc 100644
--- a/Documentation/networking/pktgen.txt
+++ b/Documentation/networking/pktgen.txt
@@ -151,6 +151,8 @@ Examples:
pgset stop aborts injection. Also, ^C aborts generator.
+ pgset "rate 300M" set rate to 300 Mb/s
+ pgset "ratep 1000000" set rate to 1Mpps
Example scripts
===============
@@ -241,6 +243,9 @@ src6
flows
flowlen
+rate
+ratep
+
References:
ftp://robur.slu.se/pub/Linux/net-development/pktgen-testing/
ftp://robur.slu.se/pub/Linux/net-development/pktgen-testing/examples/
diff --git a/Documentation/networking/ray_cs.txt b/Documentation/networking/ray_cs.txt
index 145d27a5239..c0c12307ed9 100644
--- a/Documentation/networking/ray_cs.txt
+++ b/Documentation/networking/ray_cs.txt
@@ -13,8 +13,8 @@ wireless LAN cards.
As of kernel 2.3.18, the ray_cs driver is part of the Linux kernel
source. My web page for the development of ray_cs is at
-http://world.std.com/~corey/raylink.html and I can be emailed at
-corey@world.std.com
+http://web.ralinktech.com/ralink/Home/Support/Linux.html
+and I can be emailed at corey@world.std.com
The kernel driver is based on ray_cs-1.62.tgz
diff --git a/Documentation/networking/regulatory.txt b/Documentation/networking/regulatory.txt
index ee31369e9e5..9551622d0a7 100644
--- a/Documentation/networking/regulatory.txt
+++ b/Documentation/networking/regulatory.txt
@@ -188,3 +188,27 @@ Then in some part of your code after your wiphy has been registered:
&mydriver_jp_regdom.reg_rules[i],
sizeof(struct ieee80211_reg_rule));
regulatory_struct_hint(rd);
+
+Statically compiled regulatory database
+---------------------------------------
+
+In most situations the userland solution using CRDA as described
+above is the preferred solution. However in some cases a set of
+rules built into the kernel itself may be desirable. To account
+for this situation, a configuration option has been provided
+(i.e. CONFIG_CFG80211_INTERNAL_REGDB). With this option enabled,
+the wireless database information contained in net/wireless/db.txt is
+used to generate a data structure encoded in net/wireless/regdb.c.
+That option also enables code in net/wireless/reg.c which queries
+the data in regdb.c as an alternative to using CRDA.
+
+The file net/wireless/db.txt should be kept up-to-date with the db.txt
+file available in the git repository here:
+
+ git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-regdb.git
+
+Again, most users in most situations should be using the CRDA package
+provided with their distribution, and in most other situations users
+should be building and using CRDA on their own rather than using
+this option. If you are not absolutely sure that you should be using
+CONFIG_CFG80211_INTERNAL_REGDB then _DO_NOT_USE_IT_.
diff --git a/Documentation/networking/s2io.txt b/Documentation/networking/s2io.txt
index c3d6b4d5d01..9d4e0f4df5a 100644
--- a/Documentation/networking/s2io.txt
+++ b/Documentation/networking/s2io.txt
@@ -133,7 +133,8 @@ bring down CPU utilization.
** For AMD opteron platforms with 8131 chipset, MMRBC=1 and MOST=1 are
recommended as safe parameters.
For more information, please review the AMD8131 errata at
-http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26310.pdf
+http://vip.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/
+26310_AMD-8131_HyperTransport_PCI-X_Tunnel_Revision_Guide_rev_3_18.pdf
6. Available Downloads
Neterion "s2io" driver in Red Hat and Suse 2.6-based distributions is kept up
diff --git a/Documentation/networking/skfp.txt b/Documentation/networking/skfp.txt
index abfddf81e34..203ec66c9fb 100644
--- a/Documentation/networking/skfp.txt
+++ b/Documentation/networking/skfp.txt
@@ -68,7 +68,7 @@ Compaq adapters (not tested):
=======================
From v2.01 on, the driver is integrated in the linux kernel sources.
-Therefor, the installation is the same as for any other adapter
+Therefore, the installation is the same as for any other adapter
supported by the kernel.
Refer to the manual of your distribution about the installation
of network adapters.
diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt
new file mode 100644
index 00000000000..7ee770b5ef5
--- /dev/null
+++ b/Documentation/networking/stmmac.txt
@@ -0,0 +1,143 @@
+ STMicroelectronics 10/100/1000 Synopsys Ethernet driver
+
+Copyright (C) 2007-2010 STMicroelectronics Ltd
+Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+
+This is the driver for the MAC 10/100/1000 on-chip Ethernet controllers
+(Synopsys IP blocks); it has been fully tested on STLinux platforms.
+
+Currently this network device driver is for all STM embedded MAC/GMAC
+(7xxx SoCs).
+
+DWC Ether MAC 10/100/1000 Universal version 3.41a and DWC Ether MAC 10/100
+Universal version 4.0 have been used for developing the first code
+implementation.
+
+Please, for more information also visit: www.stlinux.com
+
+1) Kernel Configuration
+The kernel configuration option is STMMAC_ETH:
+ Device Drivers ---> Network device support ---> Ethernet (1000 Mbit) --->
+ STMicroelectronics 10/100/1000 Ethernet driver (STMMAC_ETH)
+
+2) Driver parameters list:
+ debug: message level (0: no output, 16: all);
+ phyaddr: to manually provide the physical address to the PHY device;
+ dma_rxsize: DMA rx ring size;
+ dma_txsize: DMA tx ring size;
+ buf_sz: DMA buffer size;
+ tc: control the HW FIFO threshold;
+ tx_coe: Enable/Disable Tx Checksum Offload engine;
+ watchdog: transmit timeout (in milliseconds);
+ flow_ctrl: Flow control ability [on/off];
+ pause: Flow Control Pause Time;
+ tmrate: timer period (only if timer optimisation is configured).
+
+3) Command line options
+Driver parameters can be also passed in command line by using:
+ stmmaceth=dma_rxsize:128,dma_txsize:512
+
+4) Driver information and notes
+
+4.1) Transmit process
+The xmit method is invoked when the kernel needs to transmit a packet; it sets
+the descriptors in the ring and informs the DMA engine that there is a packet
+ready to be transmitted.
+Once the controller has finished transmitting the packet, an interrupt is
+triggered; So the driver will be able to release the socket buffers.
+By default, the driver sets the NETIF_F_SG bit in the features field of the
+net_device structure enabling the scatter/gather feature.
+
+4.2) Receive process
+When one or more packets are received, an interrupt happens. The interrupts
+are not queued so the driver has to scan all the descriptors in the ring during
+the receive process.
+This is based on NAPI so the interrupt handler signals only if there is work to be
+done, and it exits.
+Then the poll method will be scheduled at some future point.
+The incoming packets are stored, by the DMA, in a list of pre-allocated socket
+buffers in order to avoid the memcpy (Zero-copy).
+
+4.3) Timer-Driver Interrupt
+Instead of having the device that asynchronously notifies the frame receptions, the
+driver configures a timer to generate an interrupt at regular intervals.
+Based on the granularity of the timer, the frames that are received by the device
+will experience different levels of latency. Some NICs have dedicated timer
+device to perform this task. STMMAC can use either the RTC device or the TMU
+channel 2 on STLinux platforms.
+The timers frequency can be passed to the driver as parameter; when change it,
+take care of both hardware capability and network stability/performance impact.
+Several performance tests on STM platforms showed this optimisation allows to spare
+the CPU while having the maximum throughput.
+
+4.4) WOL
+Wake up on Lan feature through Magic Frame is only supported for the GMAC
+core.
+
+4.5) DMA descriptors
+Driver handles both normal and enhanced descriptors. The latter has been only
+tested on DWC Ether MAC 10/100/1000 Universal version 3.41a.
+
+4.6) Ethtool support
+Ethtool is supported. Driver statistics and internal errors can be taken using:
+ethtool -S ethX command. It is possible to dump registers etc.
+
+4.7) Jumbo and Segmentation Offloading
+Jumbo frames are supported and tested for the GMAC.
+The GSO has been also added but it's performed in software.
+LRO is not supported.
+
+4.8) Physical
+The driver is compatible with PAL to work with PHY and GPHY devices.
+
+4.9) Platform information
+Several information came from the platform; please refer to the
+driver's Header file in include/linux directory.
+
+struct plat_stmmacenet_data {
+ int bus_id;
+ int pbl;
+ int has_gmac;
+ void (*fix_mac_speed)(void *priv, unsigned int speed);
+ void (*bus_setup)(unsigned long ioaddr);
+#ifdef CONFIG_STM_DRIVERS
+ struct stm_pad_config *pad_config;
+#endif
+ void *bsp_priv;
+};
+
+Where:
+- pbl (Programmable Burst Length) is maximum number of
+ beats to be transferred in one DMA transaction.
+ GMAC also enables the 4xPBL by default.
+- fix_mac_speed and bus_setup are used to configure internal target
+ registers (on STM platforms);
+- has_gmac: GMAC core is on board (get it at run-time in the next step);
+- bus_id: bus identifier.
+
+struct plat_stmmacphy_data {
+ int bus_id;
+ int phy_addr;
+ unsigned int phy_mask;
+ int interface;
+ int (*phy_reset)(void *priv);
+ void *priv;
+};
+
+Where:
+- bus_id: bus identifier;
+- phy_addr: physical address used for the attached phy device;
+ set it to -1 to get it at run-time;
+- interface: physical MII interface mode;
+- phy_reset: hook to reset HW function.
+
+TODO:
+- Continue to make the driver more generic and suitable for other Synopsys
+ Ethernet controllers used on other architectures (i.e. ARM).
+- 10G controllers are not supported.
+- MAC uses Normal descriptors and GMAC uses enhanced ones.
+ This is a limit that should be reviewed. MAC could want to
+ use the enhanced structure.
+- Checksumming: Rx/Tx csum is done in HW in case of GMAC only.
+- Review the timer optimisation code to use an embedded device that seems to be
+ available in new chip generations.
diff --git a/Documentation/networking/tcp-thin.txt b/Documentation/networking/tcp-thin.txt
new file mode 100644
index 00000000000..151e229980f
--- /dev/null
+++ b/Documentation/networking/tcp-thin.txt
@@ -0,0 +1,47 @@
+Thin-streams and TCP
+====================
+A wide range of Internet-based services that use reliable transport
+protocols display what we call thin-stream properties. This means
+that the application sends data with such a low rate that the
+retransmission mechanisms of the transport protocol are not fully
+effective. In time-dependent scenarios (like online games, control
+systems, stock trading etc.) where the user experience depends
+on the data delivery latency, packet loss can be devastating for
+the service quality. Extreme latencies are caused by TCP's
+dependency on the arrival of new data from the application to trigger
+retransmissions effectively through fast retransmit instead of
+waiting for long timeouts.
+
+After analysing a large number of time-dependent interactive
+applications, we have seen that they often produce thin streams
+and also stay with this traffic pattern throughout its entire
+lifespan. The combination of time-dependency and the fact that the
+streams provoke high latencies when using TCP is unfortunate.
+
+In order to reduce application-layer latency when packets are lost,
+a set of mechanisms has been made, which address these latency issues
+for thin streams. In short, if the kernel detects a thin stream,
+the retransmission mechanisms are modified in the following manner:
+
+1) If the stream is thin, fast retransmit on the first dupACK.
+2) If the stream is thin, do not apply exponential backoff.
+
+These enhancements are applied only if the stream is detected as
+thin. This is accomplished by defining a threshold for the number
+of packets in flight. If there are less than 4 packets in flight,
+fast retransmissions can not be triggered, and the stream is prone
+to experience high retransmission latencies.
+
+Since these mechanisms are targeted at time-dependent applications,
+they must be specifically activated by the application using the
+TCP_THIN_LINEAR_TIMEOUTS and TCP_THIN_DUPACK IOCTLS or the
+tcp_thin_linear_timeouts and tcp_thin_dupack sysctls. Both
+modifications are turned off by default.
+
+References
+==========
+More information on the modifications, as well as a wide range of
+experimental data can be found here:
+"Improving latency for interactive, thin-stream applications over
+reliable transport"
+http://simula.no/research/nd/publications/Simula.nd.477/simula_pdf_file
diff --git a/Documentation/networking/timestamping.txt b/Documentation/networking/timestamping.txt
index 0e58b453917..e8c8f4f06c6 100644
--- a/Documentation/networking/timestamping.txt
+++ b/Documentation/networking/timestamping.txt
@@ -41,11 +41,12 @@ SOF_TIMESTAMPING_SOFTWARE: return system time stamp generated in
SOF_TIMESTAMPING_TX/RX determine how time stamps are generated.
SOF_TIMESTAMPING_RAW/SYS determine how they are reported in the
following control message:
- struct scm_timestamping {
- struct timespec systime;
- struct timespec hwtimetrans;
- struct timespec hwtimeraw;
- };
+
+struct scm_timestamping {
+ struct timespec systime;
+ struct timespec hwtimetrans;
+ struct timespec hwtimeraw;
+};
recvmsg() can be used to get this control message for regular incoming
packets. For send time stamps the outgoing packet is looped back to
@@ -87,12 +88,13 @@ by the network device and will be empty without that support.
SIOCSHWTSTAMP:
Hardware time stamping must also be initialized for each device driver
-that is expected to do hardware time stamping. The parameter is:
+that is expected to do hardware time stamping. The parameter is defined in
+/include/linux/net_tstamp.h as:
struct hwtstamp_config {
- int flags; /* no flags defined right now, must be zero */
- int tx_type; /* HWTSTAMP_TX_* */
- int rx_filter; /* HWTSTAMP_FILTER_* */
+ int flags; /* no flags defined right now, must be zero */
+ int tx_type; /* HWTSTAMP_TX_* */
+ int rx_filter; /* HWTSTAMP_FILTER_* */
};
Desired behavior is passed into the kernel and to a specific device by
@@ -139,42 +141,56 @@ enum {
/* time stamp any incoming packet */
HWTSTAMP_FILTER_ALL,
- /* return value: time stamp all packets requested plus some others */
- HWTSTAMP_FILTER_SOME,
+ /* return value: time stamp all packets requested plus some others */
+ HWTSTAMP_FILTER_SOME,
/* PTP v1, UDP, any kind of event packet */
HWTSTAMP_FILTER_PTP_V1_L4_EVENT,
- ...
+ /* for the complete list of values, please check
+ * the include file /include/linux/net_tstamp.h
+ */
};
DEVICE IMPLEMENTATION
A driver which supports hardware time stamping must support the
-SIOCSHWTSTAMP ioctl. Time stamps for received packets must be stored
-in the skb with skb_hwtstamp_set().
+SIOCSHWTSTAMP ioctl and update the supplied struct hwtstamp_config with
+the actual values as described in the section on SIOCSHWTSTAMP.
+
+Time stamps for received packets must be stored in the skb. To get a pointer
+to the shared time stamp structure of the skb call skb_hwtstamps(). Then
+set the time stamps in the structure:
+
+struct skb_shared_hwtstamps {
+ /* hardware time stamp transformed into duration
+ * since arbitrary point in time
+ */
+ ktime_t hwtstamp;
+ ktime_t syststamp; /* hwtstamp transformed to system time base */
+};
Time stamps for outgoing packets are to be generated as follows:
-- In hard_start_xmit(), check if skb_hwtstamp_check_tx_hardware()
- returns non-zero. If yes, then the driver is expected
- to do hardware time stamping.
+- In hard_start_xmit(), check if skb_tx(skb)->hardware is set no-zero.
+ If yes, then the driver is expected to do hardware time stamping.
- If this is possible for the skb and requested, then declare
- that the driver is doing the time stamping by calling
- skb_hwtstamp_tx_in_progress(). A driver not supporting
- hardware time stamping doesn't do that. A driver must never
- touch sk_buff::tstamp! It is used to store how time stamping
- for an outgoing packets is to be done.
+ that the driver is doing the time stamping by setting the field
+ skb_tx(skb)->in_progress non-zero. You might want to keep a pointer
+ to the associated skb for the next step and not free the skb. A driver
+ not supporting hardware time stamping doesn't do that. A driver must
+ never touch sk_buff::tstamp! It is used to store software generated
+ time stamps by the network subsystem.
- As soon as the driver has sent the packet and/or obtained a
hardware time stamp for it, it passes the time stamp back by
calling skb_hwtstamp_tx() with the original skb, the raw
- hardware time stamp and a handle to the device (necessary
- to convert the hardware time stamp to system time). If obtaining
- the hardware time stamp somehow fails, then the driver should
- not fall back to software time stamping. The rationale is that
- this would occur at a later time in the processing pipeline
- than other software time stamping and therefore could lead
- to unexpected deltas between time stamps.
-- If the driver did not call skb_hwtstamp_tx_in_progress(), then
+ hardware time stamp. skb_hwtstamp_tx() clones the original skb and
+ adds the timestamps, therefore the original skb has to be freed now.
+ If obtaining the hardware time stamp somehow fails, then the driver
+ should not fall back to software time stamping. The rationale is that
+ this would occur at a later time in the processing pipeline than other
+ software time stamping and therefore could lead to unexpected deltas
+ between time stamps.
+- If the driver did not call set skb_tx(skb)->in_progress, then
dev_hard_start_xmit() checks whether software time stamping
is wanted as fallback and potentially generates the time stamp.
diff --git a/Documentation/networking/timestamping/Makefile b/Documentation/networking/timestamping/Makefile
index 2a1489fdc03..e79973443e9 100644
--- a/Documentation/networking/timestamping/Makefile
+++ b/Documentation/networking/timestamping/Makefile
@@ -1,6 +1,13 @@
-CPPFLAGS = -I../../../include
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
-timestamping: timestamping.c
+# List of programs to build
+hostprogs-y := timestamping
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
+
+HOSTCFLAGS_timestamping.o += -I$(objtree)/usr/include
clean:
rm -f timestamping
diff --git a/Documentation/networking/timestamping/timestamping.c b/Documentation/networking/timestamping/timestamping.c
index a7936fe8444..8ba82bfe6a3 100644
--- a/Documentation/networking/timestamping/timestamping.c
+++ b/Documentation/networking/timestamping/timestamping.c
@@ -41,9 +41,9 @@
#include <arpa/inet.h>
#include <net/if.h>
-#include "asm/types.h"
-#include "linux/net_tstamp.h"
-#include "linux/errqueue.h"
+#include <asm/types.h>
+#include <linux/net_tstamp.h>
+#include <linux/errqueue.h>
#ifndef SO_TIMESTAMPING
# define SO_TIMESTAMPING 37
@@ -164,7 +164,7 @@ static void printpacket(struct msghdr *msg, int res,
gettimeofday(&now, 0);
- printf("%ld.%06ld: received %s data, %d bytes from %s, %d bytes control messages\n",
+ printf("%ld.%06ld: received %s data, %d bytes from %s, %zu bytes control messages\n",
(long)now.tv_sec, (long)now.tv_usec,
(recvmsg_flags & MSG_ERRQUEUE) ? "error" : "regular",
res,
@@ -173,7 +173,7 @@ static void printpacket(struct msghdr *msg, int res,
for (cmsg = CMSG_FIRSTHDR(msg);
cmsg;
cmsg = CMSG_NXTHDR(msg, cmsg)) {
- printf(" cmsg len %d: ", cmsg->cmsg_len);
+ printf(" cmsg len %zu: ", cmsg->cmsg_len);
switch (cmsg->cmsg_level) {
case SOL_SOCKET:
printf("SOL_SOCKET ");
@@ -370,7 +370,7 @@ int main(int argc, char **argv)
}
sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_UDP);
- if (socket < 0)
+ if (sock < 0)
bail("socket");
memset(&device, 0, sizeof(device));
diff --git a/Documentation/networking/tlan.txt b/Documentation/networking/tlan.txt
index 7e6aa5b20c3..34550dfcef7 100644
--- a/Documentation/networking/tlan.txt
+++ b/Documentation/networking/tlan.txt
@@ -2,7 +2,7 @@
(C) 1998 James Banks
(C) 1999-2001 Torben Mathiasen <tmm@image.dk, torben.mathiasen@compaq.com>
-For driver information/updates visit http://opensource.compaq.com
+For driver information/updates visit http://www.compaq.com
TLAN driver for Linux, version 1.14a
@@ -113,5 +113,5 @@ III. Things to try if you have problems.
There is also a tlan mailing list which you can join by sending "subscribe tlan"
in the body of an email to majordomo@vuser.vu.union.edu.
-There is also a tlan website at http://opensource.compaq.com
+There is also a tlan website at http://www.compaq.com
diff --git a/Documentation/networking/udplite.txt b/Documentation/networking/udplite.txt
index 855d8da57a2..d727a382910 100644
--- a/Documentation/networking/udplite.txt
+++ b/Documentation/networking/udplite.txt
@@ -11,11 +11,13 @@
This file briefly describes the existing kernel support and the socket API.
For in-depth information, you can consult:
- o The UDP-Lite Homepage: http://www.erg.abdn.ac.uk/users/gerrit/udp-lite/
+ o The UDP-Lite Homepage:
+ http://web.archive.org/web/*/http://www.erg.abdn.ac.uk/users/gerrit/udp-lite/
From here you can also download some example application source code.
o The UDP-Lite HOWTO on
- http://www.erg.abdn.ac.uk/users/gerrit/udp-lite/files/UDP-Lite-HOWTO.txt
+ http://web.archive.org/web/*/http://www.erg.abdn.ac.uk/users/gerrit/udp-lite/
+ files/UDP-Lite-HOWTO.txt
o The Wireshark UDP-Lite WiKi (with capture files):
http://wiki.wireshark.org/Lightweight_User_Datagram_Protocol
@@ -26,12 +28,7 @@
I) APPLICATIONS
Several applications have been ported successfully to UDP-Lite. Ethereal
- (now called wireshark) has UDP-Litev4/v6 support by default. The tarball on
-
- http://www.erg.abdn.ac.uk/users/gerrit/udp-lite/files/udplite_linux.tar.gz
-
- has source code for several v4/v6 client-server and network testing examples.
-
+ (now called wireshark) has UDP-Litev4/v6 support by default.
Porting applications to UDP-Lite is straightforward: only socket level and
IPPROTO need to be changed; senders additionally set the checksum coverage
length (default = header length = 8). Details are in the next section.
diff --git a/Documentation/networking/wavelan.txt b/Documentation/networking/wavelan.txt
deleted file mode 100644
index afa6e521c68..00000000000
--- a/Documentation/networking/wavelan.txt
+++ /dev/null
@@ -1,73 +0,0 @@
- The Wavelan drivers saga
- ------------------------
-
- By Jean Tourrilhes <jt@hpl.hp.com>
-
- The Wavelan is a Radio network adapter designed by
-Lucent. Under this generic name is hidden quite a variety of hardware,
-and many Linux driver to support it.
- The get the full story on Wireless LANs, please consult :
- http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/
-
-"wavelan" driver (old ISA Wavelan)
-----------------
- o Config : Network device -> Wireless LAN -> AT&T WaveLAN
- o Location : .../drivers/net/wireless/wavelan*
- o in-line doc : .../drivers/net/wireless/wavelan.p.h
- o on-line doc :
- http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html
-
- This is the driver for the ISA version of the first generation
-of the Wavelan, now discontinued. The device is 2 Mb/s, composed of a
-Intel 82586 controller and a Lucent Modem, and is NOT 802.11 compliant.
- The driver has been tested with the following hardware :
- o Wavelan ISA 915 MHz (full length ISA card)
- o Wavelan ISA 915 MHz 2.0 (half length ISA card)
- o Wavelan ISA 2.4 GHz (full length ISA card, fixed frequency)
- o Wavelan ISA 2.4 GHz 2.0 (half length ISA card, frequency selectable)
- o Above cards with the optional DES encryption feature
-
-"wavelan_cs" driver (old Pcmcia Wavelan)
--------------------
- o Config : Network device -> PCMCIA network ->
- Pcmcia Wireless LAN -> AT&T/Lucent WaveLAN
- o Location : .../drivers/net/pcmcia/wavelan*
- o in-line doc : .../drivers/net/pcmcia/wavelan_cs.h
- o on-line doc :
- http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html
-
- This is the driver for the PCMCIA version of the first
-generation of the Wavelan, now discontinued. The device is 2 Mb/s,
-composed of a Intel 82593 controller (totally different from the 82586)
-and a Lucent Modem, and NOT 802.11 compatible.
- The driver has been tested with the following hardware :
- o Wavelan Pcmcia 915 MHz 2.0 (Pcmcia card + separate
- modem/antenna block)
- o Wavelan Pcmcia 2.4 GHz 2.0 (Pcmcia card + separate
- modem/antenna block)
-
-"wvlan_cs" driver (Wavelan IEEE, GPL)
------------------
- o Config : Not yet in kernel
- o Location : Pcmcia package 3.1.10+
- o on-line doc : http://www.fasta.fh-dortmund.de/users/andy/wvlan/
-
- This is the driver for the current generation of Wavelan IEEE,
-which is 802.11 compatible. Depending on version, it is 2 Mb/s or 11
-Mb/s, with or without encryption, all implemented in Lucent specific
-DSP (the Hermes).
- This is a GPL full source PCMCIA driver (ISA is just a Pcmcia
-card with ISA-Pcmcia bridge).
-
-"wavelan2_cs" driver (Wavelan IEEE, binary)
---------------------
- o Config : Not yet in kernel
- o Location : ftp://sourceforge.org/pcmcia/contrib/
-
- This driver support exactly the same hardware as the previous
-driver, the main difference is that it is based on a binary library
-and supported by Lucent.
-
- I hope it clears the confusion ;-)
-
- Jean
diff --git a/Documentation/networking/x25-iface.txt b/Documentation/networking/x25-iface.txt
index 975cc87ebdd..78f662ee062 100644
--- a/Documentation/networking/x25-iface.txt
+++ b/Documentation/networking/x25-iface.txt
@@ -20,23 +20,23 @@ the rest of the skbuff, if any more information does exist.
Packet Layer to Device Driver
-----------------------------
-First Byte = 0x00
+First Byte = 0x00 (X25_IFACE_DATA)
This indicates that the rest of the skbuff contains data to be transmitted
over the LAPB link. The LAPB link should already exist before any data is
passed down.
-First Byte = 0x01
+First Byte = 0x01 (X25_IFACE_CONNECT)
Establish the LAPB link. If the link is already established then the connect
confirmation message should be returned as soon as possible.
-First Byte = 0x02
+First Byte = 0x02 (X25_IFACE_DISCONNECT)
Terminate the LAPB link. If it is already disconnected then the disconnect
confirmation message should be returned as soon as possible.
-First Byte = 0x03
+First Byte = 0x03 (X25_IFACE_PARAMS)
LAPB parameters. To be defined.
@@ -44,22 +44,22 @@ LAPB parameters. To be defined.
Device Driver to Packet Layer
-----------------------------
-First Byte = 0x00
+First Byte = 0x00 (X25_IFACE_DATA)
This indicates that the rest of the skbuff contains data that has been
received over the LAPB link.
-First Byte = 0x01
+First Byte = 0x01 (X25_IFACE_CONNECT)
LAPB link has been established. The same message is used for both a LAPB
link connect_confirmation and a connect_indication.
-First Byte = 0x02
+First Byte = 0x02 (X25_IFACE_DISCONNECT)
LAPB link has been terminated. This same message is used for both a LAPB
link disconnect_confirmation and a disconnect_indication.
-First Byte = 0x03
+First Byte = 0x03 (X25_IFACE_PARAMS)
LAPB parameters. To be defined.
diff --git a/Documentation/oops-tracing.txt b/Documentation/oops-tracing.txt
index c10c022b911..6fe9001b926 100644
--- a/Documentation/oops-tracing.txt
+++ b/Documentation/oops-tracing.txt
@@ -256,9 +256,13 @@ characters, each representing a particular tainted value.
9: 'A' if the ACPI table has been overridden.
10: 'W' if a warning has previously been issued by the kernel.
+ (Though some warnings may set more specific taint flags.)
11: 'C' if a staging driver has been loaded.
+ 12: 'I' if the kernel is working around a severe bug in the platform
+ firmware (BIOS or similar).
+
The primary reason for the 'Tainted: ' string is to tell kernel
debuggers if this is a clean kernel or if anything unusual has
occurred. Tainting is permanent: even if an offending module is
diff --git a/Documentation/padata.txt b/Documentation/padata.txt
new file mode 100644
index 00000000000..7ddfe216a0a
--- /dev/null
+++ b/Documentation/padata.txt
@@ -0,0 +1,160 @@
+The padata parallel execution mechanism
+Last updated for 2.6.36
+
+Padata is a mechanism by which the kernel can farm work out to be done in
+parallel on multiple CPUs while retaining the ordering of tasks. It was
+developed for use with the IPsec code, which needs to be able to perform
+encryption and decryption on large numbers of packets without reordering
+those packets. The crypto developers made a point of writing padata in a
+sufficiently general fashion that it could be put to other uses as well.
+
+The first step in using padata is to set up a padata_instance structure for
+overall control of how tasks are to be run:
+
+ #include <linux/padata.h>
+
+ struct padata_instance *padata_alloc(struct workqueue_struct *wq,
+ const struct cpumask *pcpumask,
+ const struct cpumask *cbcpumask);
+
+The pcpumask describes which processors will be used to execute work
+submitted to this instance in parallel. The cbcpumask defines which
+processors are allowed to be used as the serialization callback processor.
+The workqueue wq is where the work will actually be done; it should be
+a multithreaded queue, naturally.
+
+To allocate a padata instance with the cpu_possible_mask for both
+cpumasks this helper function can be used:
+
+ struct padata_instance *padata_alloc_possible(struct workqueue_struct *wq);
+
+Note: Padata maintains two kinds of cpumasks internally. The user supplied
+cpumasks, submitted by padata_alloc/padata_alloc_possible and the 'usable'
+cpumasks. The usable cpumasks are always a subset of active CPUs in the
+user supplied cpumasks; these are the cpumasks padata actually uses. So
+it is legal to supply a cpumask to padata that contains offline CPUs.
+Once an offline CPU in the user supplied cpumask comes online, padata
+is going to use it.
+
+There are functions for enabling and disabling the instance:
+
+ int padata_start(struct padata_instance *pinst);
+ void padata_stop(struct padata_instance *pinst);
+
+These functions are setting or clearing the "PADATA_INIT" flag;
+if that flag is not set, other functions will refuse to work.
+padata_start returns zero on success (flag set) or -EINVAL if the
+padata cpumask contains no active CPU (flag not set).
+padata_stop clears the flag and blocks until the padata instance
+is unused.
+
+The list of CPUs to be used can be adjusted with these functions:
+
+ int padata_set_cpumasks(struct padata_instance *pinst,
+ cpumask_var_t pcpumask,
+ cpumask_var_t cbcpumask);
+ int padata_set_cpumask(struct padata_instance *pinst, int cpumask_type,
+ cpumask_var_t cpumask);
+ int padata_add_cpu(struct padata_instance *pinst, int cpu, int mask);
+ int padata_remove_cpu(struct padata_instance *pinst, int cpu, int mask);
+
+Changing the CPU masks are expensive operations, though, so it should not be
+done with great frequency.
+
+It's possible to change both cpumasks of a padata instance with
+padata_set_cpumasks by specifying the cpumasks for parallel execution (pcpumask)
+and for the serial callback function (cbcpumask). padata_set_cpumask is used to
+change just one of the cpumasks. Here cpumask_type is one of PADATA_CPU_SERIAL,
+PADATA_CPU_PARALLEL and cpumask specifies the new cpumask to use.
+To simply add or remove one CPU from a certain cpumask the functions
+padata_add_cpu/padata_remove_cpu are used. cpu specifies the CPU to add or
+remove and mask is one of PADATA_CPU_SERIAL, PADATA_CPU_PARALLEL.
+
+If a user is interested in padata cpumask changes, he can register to
+the padata cpumask change notifier:
+
+ int padata_register_cpumask_notifier(struct padata_instance *pinst,
+ struct notifier_block *nblock);
+
+To unregister from that notifier:
+
+ int padata_unregister_cpumask_notifier(struct padata_instance *pinst,
+ struct notifier_block *nblock);
+
+The padata cpumask change notifier notifies about changes of the usable
+cpumasks, i.e. the subset of active CPUs in the user supplied cpumask.
+
+Padata calls the notifier chain with:
+
+ blocking_notifier_call_chain(&pinst->cpumask_change_notifier,
+ notification_mask,
+ &pd_new->cpumask);
+
+Here cpumask_change_notifier is registered notifier, notification_mask
+is one of PADATA_CPU_SERIAL, PADATA_CPU_PARALLEL and cpumask is a pointer
+to a struct padata_cpumask that contains the new cpumask information.
+
+Actually submitting work to the padata instance requires the creation of a
+padata_priv structure:
+
+ struct padata_priv {
+ /* Other stuff here... */
+ void (*parallel)(struct padata_priv *padata);
+ void (*serial)(struct padata_priv *padata);
+ };
+
+This structure will almost certainly be embedded within some larger
+structure specific to the work to be done. Most of its fields are private to
+padata, but the structure should be zeroed at initialisation time, and the
+parallel() and serial() functions should be provided. Those functions will
+be called in the process of getting the work done as we will see
+momentarily.
+
+The submission of work is done with:
+
+ int padata_do_parallel(struct padata_instance *pinst,
+ struct padata_priv *padata, int cb_cpu);
+
+The pinst and padata structures must be set up as described above; cb_cpu
+specifies which CPU will be used for the final callback when the work is
+done; it must be in the current instance's CPU mask. The return value from
+padata_do_parallel() is zero on success, indicating that the work is in
+progress. -EBUSY means that somebody, somewhere else is messing with the
+instance's CPU mask, while -EINVAL is a complaint about cb_cpu not being
+in that CPU mask or about a not running instance.
+
+Each task submitted to padata_do_parallel() will, in turn, be passed to
+exactly one call to the above-mentioned parallel() function, on one CPU, so
+true parallelism is achieved by submitting multiple tasks. Despite the
+fact that the workqueue is used to make these calls, parallel() is run with
+software interrupts disabled and thus cannot sleep. The parallel()
+function gets the padata_priv structure pointer as its lone parameter;
+information about the actual work to be done is probably obtained by using
+container_of() to find the enclosing structure.
+
+Note that parallel() has no return value; the padata subsystem assumes that
+parallel() will take responsibility for the task from this point. The work
+need not be completed during this call, but, if parallel() leaves work
+outstanding, it should be prepared to be called again with a new job before
+the previous one completes. When a task does complete, parallel() (or
+whatever function actually finishes the job) should inform padata of the
+fact with a call to:
+
+ void padata_do_serial(struct padata_priv *padata);
+
+At some point in the future, padata_do_serial() will trigger a call to the
+serial() function in the padata_priv structure. That call will happen on
+the CPU requested in the initial call to padata_do_parallel(); it, too, is
+done through the workqueue, but with local software interrupts disabled.
+Note that this call may be deferred for a while since the padata code takes
+pains to ensure that tasks are completed in the order in which they were
+submitted.
+
+The one remaining function in the padata API should be called to clean up
+when a padata instance is no longer needed:
+
+ void padata_free(struct padata_instance *pinst);
+
+This function will busy-wait while any remaining tasks are completed, so it
+might be best not to call it while there is work outstanding. Shutting
+down the workqueue, if necessary, should be done separately.
diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt
index 446f43b309d..26c0f9c0054 100644
--- a/Documentation/pcmcia/driver-changes.txt
+++ b/Documentation/pcmcia/driver-changes.txt
@@ -1,4 +1,29 @@
This file details changes in 2.6 which affect PCMCIA card driver authors:
+* pcmcia_request_io changes (as of 2.6.36)
+ Instead of io_req_t, drivers are now requested to fill out
+ struct pcmcia_device *p_dev->resource[0,1] for up to two ioport
+ ranges. After a call to pcmcia_request_io(), the ports found there
+ are reserved, after calling pcmcia_request_configuration(), they may
+ be used.
+
+* No dev_info_t, no cs_types.h (as of 2.6.36)
+ dev_info_t and a few other typedefs are removed. No longer use them
+ in PCMCIA device drivers. Also, do not include pcmcia/cs_types.h, as
+ this file is gone.
+
+* No dev_node_t (as of 2.6.35)
+ There is no more need to fill out a "dev_node_t" structure.
+
+* New IRQ request rules (as of 2.6.35)
+ Instead of the old pcmcia_request_irq() interface, drivers may now
+ choose between:
+ - calling request_irq/free_irq directly. Use the IRQ from *p_dev->irq.
+ - use pcmcia_request_irq(p_dev, handler_t); the PCMCIA core will
+ clean up automatically on calls to pcmcia_disable_device() or
+ device ejection.
+ - drivers still not capable of IRQF_SHARED (or not telling us so) may
+ use the deprecated pcmcia_request_exclusive_irq() for the time
+ being; they might receive a shared IRQ nonetheless.
* no cs_error / CS_CHECK / CONFIG_PCMCIA_DEBUG (as of 2.6.33)
Instead of the cs_error() callback or the CS_CHECK() macro, please use
diff --git a/Documentation/pcmcia/locking.txt b/Documentation/pcmcia/locking.txt
new file mode 100644
index 00000000000..68f622bc406
--- /dev/null
+++ b/Documentation/pcmcia/locking.txt
@@ -0,0 +1,118 @@
+This file explains the locking and exclusion scheme used in the PCCARD
+and PCMCIA subsystems.
+
+
+A) Overview, Locking Hierarchy:
+===============================
+
+pcmcia_socket_list_rwsem - protects only the list of sockets
+- skt_mutex - serializes card insert / ejection
+ - ops_mutex - serializes socket operation
+
+
+B) Exclusion
+============
+
+The following functions and callbacks to struct pcmcia_socket must
+be called with "skt_mutex" held:
+
+ socket_detect_change()
+ send_event()
+ socket_reset()
+ socket_shutdown()
+ socket_setup()
+ socket_remove()
+ socket_insert()
+ socket_early_resume()
+ socket_late_resume()
+ socket_resume()
+ socket_suspend()
+
+ struct pcmcia_callback *callback
+
+The following functions and callbacks to struct pcmcia_socket must
+be called with "ops_mutex" held:
+
+ socket_reset()
+ socket_setup()
+
+ struct pccard_operations *ops
+ struct pccard_resource_ops *resource_ops;
+
+Note that send_event() and struct pcmcia_callback *callback must not be
+called with "ops_mutex" held.
+
+
+C) Protection
+=============
+
+1. Global Data:
+---------------
+struct list_head pcmcia_socket_list;
+
+protected by pcmcia_socket_list_rwsem;
+
+
+2. Per-Socket Data:
+-------------------
+The resource_ops and their data are protected by ops_mutex.
+
+The "main" struct pcmcia_socket is protected as follows (read-only fields
+or single-use fields not mentioned):
+
+- by pcmcia_socket_list_rwsem:
+ struct list_head socket_list;
+
+- by thread_lock:
+ unsigned int thread_events;
+
+- by skt_mutex:
+ u_int suspended_state;
+ void (*tune_bridge);
+ struct pcmcia_callback *callback;
+ int resume_status;
+
+- by ops_mutex:
+ socket_state_t socket;
+ u_int state;
+ u_short lock_count;
+ pccard_mem_map cis_mem;
+ void __iomem *cis_virt;
+ struct { } irq;
+ io_window_t io[];
+ pccard_mem_map win[];
+ struct list_head cis_cache;
+ size_t fake_cis_len;
+ u8 *fake_cis;
+ u_int irq_mask;
+ void (*zoom_video);
+ int (*power_hook);
+ u8 resource...;
+ struct list_head devices_list;
+ u8 device_count;
+ struct pcmcia_state;
+
+
+3. Per PCMCIA-device Data:
+--------------------------
+
+The "main" struct pcmcia_devie is protected as follows (read-only fields
+or single-use fields not mentioned):
+
+
+- by pcmcia_socket->ops_mutex:
+ struct list_head socket_device_list;
+ struct config_t *function_config;
+ u16 _irq:1;
+ u16 _io:1;
+ u16 _win:4;
+ u16 _locked:1;
+ u16 allow_func_id_match:1;
+ u16 suspended:1;
+ u16 _removed:1;
+
+- by the PCMCIA driver:
+ io_req_t io;
+ irq_req_t irq;
+ config_req_t conf;
+ window_handle_t win;
diff --git a/Documentation/pnp.txt b/Documentation/pnp.txt
index a327db67782..763e4659bf1 100644
--- a/Documentation/pnp.txt
+++ b/Documentation/pnp.txt
@@ -57,7 +57,7 @@ PC standard floppy disk controller
# cat resources
DISABLED
-- Notice the string "DISABLED". THis means the device is not active.
+- Notice the string "DISABLED". This means the device is not active.
3.) check the device's possible configurations (optional)
# cat options
@@ -139,7 +139,7 @@ Plug and Play but it is planned to be in the near future.
Requirements for a Linux PnP protocol:
1.) the protocol must use EISA IDs
-2.) the protocol must inform the PnP Layer of a devices current configuration
+2.) the protocol must inform the PnP Layer of a device's current configuration
- the ability to set resources is optional but preferred.
The following are PnP protocol related functions:
@@ -158,7 +158,7 @@ pnp_remove_device
- automatically will free mem used by the device and related structures
pnp_add_id
-- adds a EISA ID to the list of supported IDs for the specified device
+- adds an EISA ID to the list of supported IDs for the specified device
For more information consult the source of a protocol such as
/drivers/pnp/pnpbios/core.c.
@@ -167,7 +167,7 @@ For more information consult the source of a protocol such as
Linux Plug and Play Drivers
---------------------------
- This section contains information for linux PnP driver developers.
+ This section contains information for Linux PnP driver developers.
The New Way
...........
@@ -235,11 +235,10 @@ static int __init serial8250_pnp_init(void)
The Old Way
...........
-a series of compatibility functions have been created to make it easy to convert
-
+A series of compatibility functions have been created to make it easy to convert
ISAPNP drivers. They should serve as a temporary solution only.
-they are as follows:
+They are as follows:
struct pnp_card *pnp_find_card(unsigned short vendor,
unsigned short device,
diff --git a/Documentation/power/apm-acpi.txt b/Documentation/power/apm-acpi.txt
index 1bd799dc17e..6cc423d3662 100644
--- a/Documentation/power/apm-acpi.txt
+++ b/Documentation/power/apm-acpi.txt
@@ -28,5 +28,5 @@ and be sure that they are started sometime in the system boot process.
Go ahead and start both. If ACPI or APM is not available on your
system the associated daemon will exit gracefully.
- apmd: http://worldvisions.ca/~apenwarr/apmd/
+ apmd: http://ftp.debian.org/pool/main/a/apmd/
acpid: http://acpid.sf.net/
diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt
index 1555001bc73..ddd78172ef7 100644
--- a/Documentation/power/basic-pm-debugging.txt
+++ b/Documentation/power/basic-pm-debugging.txt
@@ -179,8 +179,7 @@ use the PM_TRACE mechanism documented in Documentation/s2ram.txt .
To verify that the STR works, it is generally more convenient to use the s2ram
tool available from http://suspend.sf.net and documented at
-http://en.opensuse.org/s2ram . However, before doing that it is recommended to
-carry out STR testing using the facility described in section 1.
+http://en.opensuse.org/SDB:Suspend_to_RAM.
Namely, after writing "freezer", "devices", "platform", "processors", or "core"
into /sys/power/pm_test (available if the kernel is compiled with
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index c9abbd86bc1..57080cd7457 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -1,7 +1,13 @@
+Device Power Management
+
+Copyright (c) 2010 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+Copyright (c) 2010 Alan Stern <stern@rowland.harvard.edu>
+
+
Most of the code in Linux is device drivers, so most of the Linux power
-management code is also driver-specific. Most drivers will do very little;
-others, especially for platforms with small batteries (like cell phones),
-will do a lot.
+management (PM) code is also driver-specific. Most drivers will do very
+little; others, especially for platforms with small batteries (like cell
+phones), will do a lot.
This writeup gives an overview of how drivers interact with system-wide
power management goals, emphasizing the models and interfaces that are
@@ -15,9 +21,10 @@ Drivers will use one or both of these models to put devices into low-power
states:
System Sleep model:
- Drivers can enter low power states as part of entering system-wide
- low-power states like "suspend-to-ram", or (mostly for systems with
- disks) "hibernate" (suspend-to-disk).
+ Drivers can enter low-power states as part of entering system-wide
+ low-power states like "suspend" (also known as "suspend-to-RAM"), or
+ (mostly for systems with disks) "hibernation" (also known as
+ "suspend-to-disk").
This is something that device, bus, and class drivers collaborate on
by implementing various role-specific suspend and resume methods to
@@ -25,33 +32,41 @@ states:
them without loss of data.
Some drivers can manage hardware wakeup events, which make the system
- leave that low-power state. This feature may be disabled using the
- relevant /sys/devices/.../power/wakeup file; enabling it may cost some
- power usage, but let the whole system enter low power states more often.
+ leave the low-power state. This feature may be enabled or disabled
+ using the relevant /sys/devices/.../power/wakeup file (for Ethernet
+ drivers the ioctl interface used by ethtool may also be used for this
+ purpose); enabling it may cost some power usage, but let the whole
+ system enter low-power states more often.
Runtime Power Management model:
- Drivers may also enter low power states while the system is running,
- independently of other power management activity. Upstream drivers
- will normally not know (or care) if the device is in some low power
- state when issuing requests; the driver will auto-resume anything
- that's needed when it gets a request.
-
- This doesn't have, or need much infrastructure; it's just something you
- should do when writing your drivers. For example, clk_disable() unused
- clocks as part of minimizing power drain for currently-unused hardware.
- Of course, sometimes clusters of drivers will collaborate with each
- other, which could involve task-specific power management.
-
-There's not a lot to be said about those low power states except that they
-are very system-specific, and often device-specific. Also, that if enough
-drivers put themselves into low power states (at "runtime"), the effect may be
-the same as entering some system-wide low-power state (system sleep) ... and
-that synergies exist, so that several drivers using runtime pm might put the
-system into a state where even deeper power saving options are available.
-
-Most suspended devices will have quiesced all I/O: no more DMA or irqs, no
-more data read or written, and requests from upstream drivers are no longer
-accepted. A given bus or platform may have different requirements though.
+ Devices may also be put into low-power states while the system is
+ running, independently of other power management activity in principle.
+ However, devices are not generally independent of each other (for
+ example, a parent device cannot be suspended unless all of its child
+ devices have been suspended). Moreover, depending on the bus type the
+ device is on, it may be necessary to carry out some bus-specific
+ operations on the device for this purpose. Devices put into low power
+ states at run time may require special handling during system-wide power
+ transitions (suspend or hibernation).
+
+ For these reasons not only the device driver itself, but also the
+ appropriate subsystem (bus type, device type or device class) driver and
+ the PM core are involved in runtime power management. As in the system
+ sleep power management case, they need to collaborate by implementing
+ various role-specific suspend and resume methods, so that the hardware
+ is cleanly powered down and reactivated without data or service loss.
+
+There's not a lot to be said about those low-power states except that they are
+very system-specific, and often device-specific. Also, that if enough devices
+have been put into low-power states (at runtime), the effect may be very similar
+to entering some system-wide low-power state (system sleep) ... and that
+synergies exist, so that several drivers using runtime PM might put the system
+into a state where even deeper power saving options are available.
+
+Most suspended devices will have quiesced all I/O: no more DMA or IRQs (except
+for wakeup events), no more data read or written, and requests from upstream
+drivers are no longer accepted. A given bus or platform may have different
+requirements though.
Examples of hardware wakeup events include an alarm from a real time clock,
network wake-on-LAN packets, keyboard or mouse activity, and media insertion
@@ -60,129 +75,152 @@ or removal (for PCMCIA, MMC/SD, USB, and so on).
Interfaces for Entering System Sleep States
===========================================
-Most of the programming interfaces a device driver needs to know about
-relate to that first model: entering a system-wide low power state,
-rather than just minimizing power consumption by one device.
-
-
-Bus Driver Methods
-------------------
-The core methods to suspend and resume devices reside in struct bus_type.
-These are mostly of interest to people writing infrastructure for busses
-like PCI or USB, or because they define the primitives that device drivers
-may need to apply in domain-specific ways to their devices:
-
-struct bus_type {
- ...
- int (*suspend)(struct device *dev, pm_message_t state);
- int (*resume)(struct device *dev);
+There are programming interfaces provided for subsystems (bus type, device type,
+device class) and device drivers to allow them to participate in the power
+management of devices they are concerned with. These interfaces cover both
+system sleep and runtime power management.
+
+
+Device Power Management Operations
+----------------------------------
+Device power management operations, at the subsystem level as well as at the
+device driver level, are implemented by defining and populating objects of type
+struct dev_pm_ops:
+
+struct dev_pm_ops {
+ int (*prepare)(struct device *dev);
+ void (*complete)(struct device *dev);
+ int (*suspend)(struct device *dev);
+ int (*resume)(struct device *dev);
+ int (*freeze)(struct device *dev);
+ int (*thaw)(struct device *dev);
+ int (*poweroff)(struct device *dev);
+ int (*restore)(struct device *dev);
+ int (*suspend_noirq)(struct device *dev);
+ int (*resume_noirq)(struct device *dev);
+ int (*freeze_noirq)(struct device *dev);
+ int (*thaw_noirq)(struct device *dev);
+ int (*poweroff_noirq)(struct device *dev);
+ int (*restore_noirq)(struct device *dev);
+ int (*runtime_suspend)(struct device *dev);
+ int (*runtime_resume)(struct device *dev);
+ int (*runtime_idle)(struct device *dev);
};
-Bus drivers implement those methods as appropriate for the hardware and
-the drivers using it; PCI works differently from USB, and so on. Not many
-people write bus drivers; most driver code is a "device driver" that
-builds on top of bus-specific framework code.
+This structure is defined in include/linux/pm.h and the methods included in it
+are also described in that file. Their roles will be explained in what follows.
+For now, it should be sufficient to remember that the last three methods are
+specific to runtime power management while the remaining ones are used during
+system-wide power transitions.
-For more information on these driver calls, see the description later;
-they are called in phases for every device, respecting the parent-child
-sequencing in the driver model tree. Note that as this is being written,
-only the suspend() and resume() are widely available; not many bus drivers
-leverage all of those phases, or pass them down to lower driver levels.
+There also is a deprecated "old" or "legacy" interface for power management
+operations available at least for some subsystems. This approach does not use
+struct dev_pm_ops objects and it is suitable only for implementing system sleep
+power management methods. Therefore it is not described in this document, so
+please refer directly to the source code for more information about it.
-/sys/devices/.../power/wakeup files
------------------------------------
-All devices in the driver model have two flags to control handling of
-wakeup events, which are hardware signals that can force the device and/or
-system out of a low power state. These are initialized by bus or device
-driver code using device_init_wakeup(dev,can_wakeup).
+Subsystem-Level Methods
+-----------------------
+The core methods to suspend and resume devices reside in struct dev_pm_ops
+pointed to by the pm member of struct bus_type, struct device_type and
+struct class. They are mostly of interest to the people writing infrastructure
+for buses, like PCI or USB, or device type and device class drivers.
-The "can_wakeup" flag just records whether the device (and its driver) can
-physically support wakeup events. When that flag is clear, the sysfs
-"wakeup" file is empty, and device_may_wakeup() returns false.
+Bus drivers implement these methods as appropriate for the hardware and the
+drivers using it; PCI works differently from USB, and so on. Not many people
+write subsystem-level drivers; most driver code is a "device driver" that builds
+on top of bus-specific framework code.
-For devices that can issue wakeup events, a separate flag controls whether
-that device should try to use its wakeup mechanism. The initial value of
-device_may_wakeup() will be true, so that the device's "wakeup" file holds
-the value "enabled". Userspace can change that to "disabled" so that
-device_may_wakeup() returns false; or change it back to "enabled" (so that
-it returns true again).
+For more information on these driver calls, see the description later;
+they are called in phases for every device, respecting the parent-child
+sequencing in the driver model tree.
-EXAMPLE: PCI Device Driver Methods
+/sys/devices/.../power/wakeup files
-----------------------------------
-PCI framework software calls these methods when the PCI device driver bound
-to a device device has provided them:
-
-struct pci_driver {
- ...
- int (*suspend)(struct pci_device *pdev, pm_message_t state);
- int (*suspend_late)(struct pci_device *pdev, pm_message_t state);
+All devices in the driver model have two flags to control handling of wakeup
+events (hardware signals that can force the device and/or system out of a low
+power state). These flags are initialized by bus or device driver code using
+device_set_wakeup_capable() and device_set_wakeup_enable(), defined in
+include/linux/pm_wakeup.h.
- int (*resume_early)(struct pci_device *pdev);
- int (*resume)(struct pci_device *pdev);
-};
-
-Drivers will implement those methods, and call PCI-specific procedures
-like pci_set_power_state(), pci_enable_wake(), pci_save_state(), and
-pci_restore_state() to manage PCI-specific mechanisms. (PCI config space
-could be saved during driver probe, if it weren't for the fact that some
-systems rely on userspace tweaking using setpci.) Devices are suspended
-before their bridges enter low power states, and likewise bridges resume
-before their devices.
-
-
-Upper Layers of Driver Stacks
------------------------------
-Device drivers generally have at least two interfaces, and the methods
-sketched above are the ones which apply to the lower level (nearer PCI, USB,
-or other bus hardware). The network and block layers are examples of upper
-level interfaces, as is a character device talking to userspace.
-
-Power management requests normally need to flow through those upper levels,
-which often use domain-oriented requests like "blank that screen". In
-some cases those upper levels will have power management intelligence that
-relates to end-user activity, or other devices that work in cooperation.
-
-When those interfaces are structured using class interfaces, there is a
-standard way to have the upper layer stop issuing requests to a given
-class device (and restart later):
-
-struct class {
- ...
- int (*suspend)(struct device *dev, pm_message_t state);
- int (*resume)(struct device *dev);
-};
-
-Those calls are issued in specific phases of the process by which the
-system enters a low power "suspend" state, or resumes from it.
-
-
-Calling Drivers to Enter System Sleep States
-============================================
-When the system enters a low power state, each device's driver is asked
-to suspend the device by putting it into state compatible with the target
+The "can_wakeup" flag just records whether the device (and its driver) can
+physically support wakeup events. The device_set_wakeup_capable() routine
+affects this flag. The "should_wakeup" flag controls whether the device should
+try to use its wakeup mechanism. device_set_wakeup_enable() affects this flag;
+for the most part drivers should not change its value. The initial value of
+should_wakeup is supposed to be false for the majority of devices; the major
+exceptions are power buttons, keyboards, and Ethernet adapters whose WoL
+(wake-on-LAN) feature has been set up with ethtool.
+
+Whether or not a device is capable of issuing wakeup events is a hardware
+matter, and the kernel is responsible for keeping track of it. By contrast,
+whether or not a wakeup-capable device should issue wakeup events is a policy
+decision, and it is managed by user space through a sysfs attribute: the
+power/wakeup file. User space can write the strings "enabled" or "disabled" to
+set or clear the should_wakeup flag, respectively. Reads from the file will
+return the corresponding string if can_wakeup is true, but if can_wakeup is
+false then reads will return an empty string, to indicate that the device
+doesn't support wakeup events. (But even though the file appears empty, writes
+will still affect the should_wakeup flag.)
+
+The device_may_wakeup() routine returns true only if both flags are set.
+Drivers should check this routine when putting devices in a low-power state
+during a system sleep transition, to see whether or not to enable the devices'
+wakeup mechanisms. However for runtime power management, wakeup events should
+be enabled whenever the device and driver both support them, regardless of the
+should_wakeup flag.
+
+
+/sys/devices/.../power/control files
+------------------------------------
+Each device in the driver model has a flag to control whether it is subject to
+runtime power management. This flag, called runtime_auto, is initialized by the
+bus type (or generally subsystem) code using pm_runtime_allow() or
+pm_runtime_forbid(); the default is to allow runtime power management.
+
+The setting can be adjusted by user space by writing either "on" or "auto" to
+the device's power/control sysfs file. Writing "auto" calls pm_runtime_allow(),
+setting the flag and allowing the device to be runtime power-managed by its
+driver. Writing "on" calls pm_runtime_forbid(), clearing the flag, returning
+the device to full power if it was in a low-power state, and preventing the
+device from being runtime power-managed. User space can check the current value
+of the runtime_auto flag by reading the file.
+
+The device's runtime_auto flag has no effect on the handling of system-wide
+power transitions. In particular, the device can (and in the majority of cases
+should and will) be put into a low-power state during a system-wide transition
+to a sleep state even though its runtime_auto flag is clear.
+
+For more information about the runtime power management framework, refer to
+Documentation/power/runtime_pm.txt.
+
+
+Calling Drivers to Enter and Leave System Sleep States
+======================================================
+When the system goes into a sleep state, each device's driver is asked to
+suspend the device by putting it into a state compatible with the target
system state. That's usually some version of "off", but the details are
system-specific. Also, wakeup-enabled devices will usually stay partly
functional in order to wake the system.
-When the system leaves that low power state, the device's driver is asked
-to resume it. The suspend and resume operations always go together, and
-both are multi-phase operations.
+When the system leaves that low-power state, the device's driver is asked to
+resume it by returning it to full power. The suspend and resume operations
+always go together, and both are multi-phase operations.
-For simple drivers, suspend might quiesce the device using the class code
-and then turn its hardware as "off" as possible with late_suspend. The
+For simple drivers, suspend might quiesce the device using class code
+and then turn its hardware as "off" as possible during suspend_noirq. The
matching resume calls would then completely reinitialize the hardware
before reactivating its class I/O queues.
-More power-aware drivers drivers will use more than one device low power
-state, either at runtime or during system sleep states, and might trigger
-system wakeup events.
+More power-aware drivers might prepare the devices for triggering system wakeup
+events.
Call Sequence Guarantees
------------------------
-To ensure that bridges and similar links needed to talk to a device are
+To ensure that bridges and similar links needing to talk to a device are
available when the device is suspended or resumed, the device tree is
walked in a bottom-up order to suspend devices. A top-down order is
used to resume those devices.
@@ -194,67 +232,310 @@ its parent; and can't be removed or suspended after that parent.
The policy is that the device tree should match hardware bus topology.
(Or at least the control bus, for devices which use multiple busses.)
In particular, this means that a device registration may fail if the parent of
-the device is suspending (ie. has been chosen by the PM core as the next
+the device is suspending (i.e. has been chosen by the PM core as the next
device to suspend) or has already suspended, as well as after all of the other
devices have been suspended. Device drivers must be prepared to cope with such
situations.
-Suspending Devices
-------------------
-Suspending a given device is done in several phases. Suspending the
-system always includes every phase, executing calls for every device
-before the next phase begins. Not all busses or classes support all
-these callbacks; and not all drivers use all the callbacks.
+System Power Management Phases
+------------------------------
+Suspending or resuming the system is done in several phases. Different phases
+are used for standby or memory sleep states ("suspend-to-RAM") and the
+hibernation state ("suspend-to-disk"). Each phase involves executing callbacks
+for every device before the next phase begins. Not all busses or classes
+support all these callbacks and not all drivers use all the callbacks. The
+various phases always run after tasks have been frozen and before they are
+unfrozen. Furthermore, the *_noirq phases run at a time when IRQ handlers have
+been disabled (except for those marked with the IRQ_WAKEUP flag).
-The phases are seen by driver notifications issued in this order:
+Most phases use bus, type, and class callbacks (that is, methods defined in
+dev->bus->pm, dev->type->pm, and dev->class->pm). The prepare and complete
+phases are exceptions; they use only bus callbacks. When multiple callbacks
+are used in a phase, they are invoked in the order: <class, type, bus> during
+power-down transitions and in the opposite order during power-up transitions.
+For example, during the suspend phase the PM core invokes
- 1 class.suspend(dev, message) is called after tasks are frozen, for
- devices associated with a class that has such a method. This
- method may sleep.
+ dev->class->pm.suspend(dev);
+ dev->type->pm.suspend(dev);
+ dev->bus->pm.suspend(dev);
- Since I/O activity usually comes from such higher layers, this is
- a good place to quiesce all drivers of a given type (and keep such
- code out of those drivers).
+before moving on to the next device, whereas during the resume phase the core
+invokes
- 2 bus.suspend(dev, message) is called next. This method may sleep,
- and is often morphed into a device driver call with bus-specific
- parameters and/or rules.
+ dev->bus->pm.resume(dev);
+ dev->type->pm.resume(dev);
+ dev->class->pm.resume(dev);
- This call should handle parts of device suspend logic that require
- sleeping. It probably does work to quiesce the device which hasn't
- been abstracted into class.suspend().
+These callbacks may in turn invoke device- or driver-specific methods stored in
+dev->driver->pm, but they don't have to.
-The pm_message_t parameter is currently used to refine those semantics
-(described later).
-At the end of those phases, drivers should normally have stopped all I/O
-transactions (DMA, IRQs), saved enough state that they can re-initialize
-or restore previous state (as needed by the hardware), and placed the
-device into a low-power state. On many platforms they will also use
-clk_disable() to gate off one or more clock sources; sometimes they will
-also switch off power supplies, or reduce voltages. Drivers which have
-runtime PM support may already have performed some or all of the steps
-needed to prepare for the upcoming system sleep state.
+Entering System Suspend
+-----------------------
+When the system goes into the standby or memory sleep state, the phases are:
+
+ prepare, suspend, suspend_noirq.
+
+ 1. The prepare phase is meant to prevent races by preventing new devices
+ from being registered; the PM core would never know that all the
+ children of a device had been suspended if new children could be
+ registered at will. (By contrast, devices may be unregistered at any
+ time.) Unlike the other suspend-related phases, during the prepare
+ phase the device tree is traversed top-down.
+
+ The prepare phase uses only a bus callback. After the callback method
+ returns, no new children may be registered below the device. The method
+ may also prepare the device or driver in some way for the upcoming
+ system power transition, but it should not put the device into a
+ low-power state.
+
+ 2. The suspend methods should quiesce the device to stop it from performing
+ I/O. They also may save the device registers and put it into the
+ appropriate low-power state, depending on the bus type the device is on,
+ and they may enable wakeup events.
+
+ 3. The suspend_noirq phase occurs after IRQ handlers have been disabled,
+ which means that the driver's interrupt handler will not be called while
+ the callback method is running. The methods should save the values of
+ the device's registers that weren't saved previously and finally put the
+ device into the appropriate low-power state.
+
+ The majority of subsystems and device drivers need not implement this
+ callback. However, bus types allowing devices to share interrupt
+ vectors, like PCI, generally need it; otherwise a driver might encounter
+ an error during the suspend phase by fielding a shared interrupt
+ generated by some other device after its own device had been set to low
+ power.
+
+At the end of these phases, drivers should have stopped all I/O transactions
+(DMA, IRQs), saved enough state that they can re-initialize or restore previous
+state (as needed by the hardware), and placed the device into a low-power state.
+On many platforms they will gate off one or more clock sources; sometimes they
+will also switch off power supplies or reduce voltages. (Drivers supporting
+runtime PM may already have performed some or all of these steps.)
+
+If device_may_wakeup(dev) returns true, the device should be prepared for
+generating hardware wakeup signals to trigger a system wakeup event when the
+system is in the sleep state. For example, enable_irq_wake() might identify
+GPIO signals hooked up to a switch or other external hardware, and
+pci_enable_wake() does something similar for the PCI PME signal.
+
+If any of these callbacks returns an error, the system won't enter the desired
+low-power state. Instead the PM core will unwind its actions by resuming all
+the devices that were suspended.
+
+
+Leaving System Suspend
+----------------------
+When resuming from standby or memory sleep, the phases are:
+
+ resume_noirq, resume, complete.
+
+ 1. The resume_noirq callback methods should perform any actions needed
+ before the driver's interrupt handlers are invoked. This generally
+ means undoing the actions of the suspend_noirq phase. If the bus type
+ permits devices to share interrupt vectors, like PCI, the method should
+ bring the device and its driver into a state in which the driver can
+ recognize if the device is the source of incoming interrupts, if any,
+ and handle them correctly.
+
+ For example, the PCI bus type's ->pm.resume_noirq() puts the device into
+ the full-power state (D0 in the PCI terminology) and restores the
+ standard configuration registers of the device. Then it calls the
+ device driver's ->pm.resume_noirq() method to perform device-specific
+ actions.
+
+ 2. The resume methods should bring the the device back to its operating
+ state, so that it can perform normal I/O. This generally involves
+ undoing the actions of the suspend phase.
+
+ 3. The complete phase uses only a bus callback. The method should undo the
+ actions of the prepare phase. Note, however, that new children may be
+ registered below the device as soon as the resume callbacks occur; it's
+ not necessary to wait until the complete phase.
+
+At the end of these phases, drivers should be as functional as they were before
+suspending: I/O can be performed using DMA and IRQs, and the relevant clocks are
+gated on. Even if the device was in a low-power state before the system sleep
+because of runtime power management, afterwards it should be back in its
+full-power state. There are multiple reasons why it's best to do this; they are
+discussed in more detail in Documentation/power/runtime_pm.txt.
-When any driver sees that its device_can_wakeup(dev), it should make sure
-to use the relevant hardware signals to trigger a system wakeup event.
-For example, enable_irq_wake() might identify GPIO signals hooked up to
-a switch or other external hardware, and pci_enable_wake() does something
-similar for PCI's PME# signal.
+However, the details here may again be platform-specific. For example,
+some systems support multiple "run" states, and the mode in effect at
+the end of resume might not be the one which preceded suspension.
+That means availability of certain clocks or power supplies changed,
+which could easily affect how a driver works.
+
+Drivers need to be able to handle hardware which has been reset since the
+suspend methods were called, for example by complete reinitialization.
+This may be the hardest part, and the one most protected by NDA'd documents
+and chip errata. It's simplest if the hardware state hasn't changed since
+the suspend was carried out, but that can't be guaranteed (in fact, it ususally
+is not the case).
+
+Drivers must also be prepared to notice that the device has been removed
+while the system was powered down, whenever that's physically possible.
+PCMCIA, MMC, USB, Firewire, SCSI, and even IDE are common examples of busses
+where common Linux platforms will see such removal. Details of how drivers
+will notice and handle such removals are currently bus-specific, and often
+involve a separate thread.
+
+These callbacks may return an error value, but the PM core will ignore such
+errors since there's nothing it can do about them other than printing them in
+the system log.
+
+
+Entering Hibernation
+--------------------
+Hibernating the system is more complicated than putting it into the standby or
+memory sleep state, because it involves creating and saving a system image.
+Therefore there are more phases for hibernation, with a different set of
+callbacks. These phases always run after tasks have been frozen and memory has
+been freed.
+
+The general procedure for hibernation is to quiesce all devices (freeze), create
+an image of the system memory while everything is stable, reactivate all
+devices (thaw), write the image to permanent storage, and finally shut down the
+system (poweroff). The phases used to accomplish this are:
+
+ prepare, freeze, freeze_noirq, thaw_noirq, thaw, complete,
+ prepare, poweroff, poweroff_noirq
+
+ 1. The prepare phase is discussed in the "Entering System Suspend" section
+ above.
+
+ 2. The freeze methods should quiesce the device so that it doesn't generate
+ IRQs or DMA, and they may need to save the values of device registers.
+ However the device does not have to be put in a low-power state, and to
+ save time it's best not to do so. Also, the device should not be
+ prepared to generate wakeup events.
+
+ 3. The freeze_noirq phase is analogous to the suspend_noirq phase discussed
+ above, except again that the device should not be put in a low-power
+ state and should not be allowed to generate wakeup events.
+
+At this point the system image is created. All devices should be inactive and
+the contents of memory should remain undisturbed while this happens, so that the
+image forms an atomic snapshot of the system state.
+
+ 4. The thaw_noirq phase is analogous to the resume_noirq phase discussed
+ above. The main difference is that its methods can assume the device is
+ in the same state as at the end of the freeze_noirq phase.
+
+ 5. The thaw phase is analogous to the resume phase discussed above. Its
+ methods should bring the device back to an operating state, so that it
+ can be used for saving the image if necessary.
+
+ 6. The complete phase is discussed in the "Leaving System Suspend" section
+ above.
+
+At this point the system image is saved, and the devices then need to be
+prepared for the upcoming system shutdown. This is much like suspending them
+before putting the system into the standby or memory sleep state, and the phases
+are similar.
+
+ 7. The prepare phase is discussed above.
+
+ 8. The poweroff phase is analogous to the suspend phase.
+
+ 9. The poweroff_noirq phase is analogous to the suspend_noirq phase.
+
+The poweroff and poweroff_noirq callbacks should do essentially the same things
+as the suspend and suspend_noirq callbacks. The only notable difference is that
+they need not store the device register values, because the registers should
+already have been stored during the freeze or freeze_noirq phases.
+
+
+Leaving Hibernation
+-------------------
+Resuming from hibernation is, again, more complicated than resuming from a sleep
+state in which the contents of main memory are preserved, because it requires
+a system image to be loaded into memory and the pre-hibernation memory contents
+to be restored before control can be passed back to the image kernel.
+
+Although in principle, the image might be loaded into memory and the
+pre-hibernation memory contents restored by the boot loader, in practice this
+can't be done because boot loaders aren't smart enough and there is no
+established protocol for passing the necessary information. So instead, the
+boot loader loads a fresh instance of the kernel, called the boot kernel, into
+memory and passes control to it in the usual way. Then the boot kernel reads
+the system image, restores the pre-hibernation memory contents, and passes
+control to the image kernel. Thus two different kernels are involved in
+resuming from hibernation. In fact, the boot kernel may be completely different
+from the image kernel: a different configuration and even a different version.
+This has important consequences for device drivers and their subsystems.
+
+To be able to load the system image into memory, the boot kernel needs to
+include at least a subset of device drivers allowing it to access the storage
+medium containing the image, although it doesn't need to include all of the
+drivers present in the image kernel. After the image has been loaded, the
+devices managed by the boot kernel need to be prepared for passing control back
+to the image kernel. This is very similar to the initial steps involved in
+creating a system image, and it is accomplished in the same way, using prepare,
+freeze, and freeze_noirq phases. However the devices affected by these phases
+are only those having drivers in the boot kernel; other devices will still be in
+whatever state the boot loader left them.
+
+Should the restoration of the pre-hibernation memory contents fail, the boot
+kernel would go through the "thawing" procedure described above, using the
+thaw_noirq, thaw, and complete phases, and then continue running normally. This
+happens only rarely. Most often the pre-hibernation memory contents are
+restored successfully and control is passed to the image kernel, which then
+becomes responsible for bringing the system back to the working state.
+
+To achieve this, the image kernel must restore the devices' pre-hibernation
+functionality. The operation is much like waking up from the memory sleep
+state, although it involves different phases:
+
+ restore_noirq, restore, complete
+
+ 1. The restore_noirq phase is analogous to the resume_noirq phase.
+
+ 2. The restore phase is analogous to the resume phase.
+
+ 3. The complete phase is discussed above.
+
+The main difference from resume[_noirq] is that restore[_noirq] must assume the
+device has been accessed and reconfigured by the boot loader or the boot kernel.
+Consequently the state of the device may be different from the state remembered
+from the freeze and freeze_noirq phases. The device may even need to be reset
+and completely re-initialized. In many cases this difference doesn't matter, so
+the resume[_noirq] and restore[_norq] method pointers can be set to the same
+routines. Nevertheless, different callback pointers are used in case there is a
+situation where it actually matters.
-If a driver (or bus, or class) fails it suspend method, the system won't
-enter the desired low power state; it will resume all the devices it's
-suspended so far.
-Note that drivers may need to perform different actions based on the target
-system lowpower/sleep state. At this writing, there are only platform
-specific APIs through which drivers could determine those target states.
+System Devices
+--------------
+System devices (sysdevs) follow a slightly different API, which can be found in
+
+ include/linux/sysdev.h
+ drivers/base/sys.c
+
+System devices will be suspended with interrupts disabled, and after all other
+devices have been suspended. On resume, they will be resumed before any other
+devices, and also with interrupts disabled. These things occur in special
+"sysdev_driver" phases, which affect only system devices.
+
+Thus, after the suspend_noirq (or freeze_noirq or poweroff_noirq) phase, when
+the non-boot CPUs are all offline and IRQs are disabled on the remaining online
+CPU, then a sysdev_driver.suspend phase is carried out, and the system enters a
+sleep state (or a system image is created). During resume (or after the image
+has been created or loaded) a sysdev_driver.resume phase is carried out, IRQs
+are enabled on the only online CPU, the non-boot CPUs are enabled, and the
+resume_noirq (or thaw_noirq or restore_noirq) phase begins.
+
+Code to actually enter and exit the system-wide low power state sometimes
+involves hardware details that are only known to the boot firmware, and
+may leave a CPU running software (from SRAM or flash memory) that monitors
+the system and manages its wakeup sequence.
Device Low Power (suspend) States
---------------------------------
-Device low-power states aren't very standard. One device might only handle
+Device low-power states aren't standard. One device might only handle
"on" and "off, while another might support a dozen different versions of
"on" (how many engines are active?), plus a state that gets back to "on"
faster than from a full "off".
@@ -265,7 +546,7 @@ PCI device may not perform DMA or issue IRQs, and any wakeup events it
issues would be issued through the PME# bus signal. Plus, there are
several PCI-standard device states, some of which are optional.
-In contrast, integrated system-on-chip processors often use irqs as the
+In contrast, integrated system-on-chip processors often use IRQs as the
wakeup event sources (so drivers would call enable_irq_wake) and might
be able to treat DMA completion as a wakeup event (sometimes DMA can stay
active too, it'd only be the CPU and some peripherals that sleep).
@@ -284,120 +565,17 @@ ways; the aforementioned LCD might be active in one product's "standby",
but a different product using the same SOC might work differently.
-Meaning of pm_message_t.event
------------------------------
-Parameters to suspend calls include the device affected and a message of
-type pm_message_t, which has one field: the event. If driver does not
-recognize the event code, suspend calls may abort the request and return
-a negative errno. However, most drivers will be fine if they implement
-PM_EVENT_SUSPEND semantics for all messages.
+Power Management Notifiers
+--------------------------
+There are some operations that cannot be carried out by the power management
+callbacks discussed above, because the callbacks occur too late or too early.
+To handle these cases, subsystems and device drivers may register power
+management notifiers that are called before tasks are frozen and after they have
+been thawed. Generally speaking, the PM notifiers are suitable for performing
+actions that either require user space to be available, or at least won't
+interfere with user space.
-The event codes are used to refine the goal of suspending the device, and
-mostly matter when creating or resuming system memory image snapshots, as
-used with suspend-to-disk:
-
- PM_EVENT_SUSPEND -- quiesce the driver and put hardware into a low-power
- state. When used with system sleep states like "suspend-to-RAM" or
- "standby", the upcoming resume() call will often be able to rely on
- state kept in hardware, or issue system wakeup events.
-
- PM_EVENT_HIBERNATE -- Put hardware into a low-power state and enable wakeup
- events as appropriate. It is only used with hibernation
- (suspend-to-disk) and few devices are able to wake up the system from
- this state; most are completely powered off.
-
- PM_EVENT_FREEZE -- quiesce the driver, but don't necessarily change into
- any low power mode. A system snapshot is about to be taken, often
- followed by a call to the driver's resume() method. Neither wakeup
- events nor DMA are allowed.
-
- PM_EVENT_PRETHAW -- quiesce the driver, knowing that the upcoming resume()
- will restore a suspend-to-disk snapshot from a different kernel image.
- Drivers that are smart enough to look at their hardware state during
- resume() processing need that state to be correct ... a PRETHAW could
- be used to invalidate that state (by resetting the device), like a
- shutdown() invocation would before a kexec() or system halt. Other
- drivers might handle this the same way as PM_EVENT_FREEZE. Neither
- wakeup events nor DMA are allowed.
-
-To enter "standby" (ACPI S1) or "Suspend to RAM" (STR, ACPI S3) states, or
-the similarly named APM states, only PM_EVENT_SUSPEND is used; the other event
-codes are used for hibernation ("Suspend to Disk", STD, ACPI S4).
-
-There's also PM_EVENT_ON, a value which never appears as a suspend event
-but is sometimes used to record the "not suspended" device state.
-
-
-Resuming Devices
-----------------
-Resuming is done in multiple phases, much like suspending, with all
-devices processing each phase's calls before the next phase begins.
-
-The phases are seen by driver notifications issued in this order:
-
- 1 bus.resume(dev) reverses the effects of bus.suspend(). This may
- be morphed into a device driver call with bus-specific parameters;
- implementations may sleep.
-
- 2 class.resume(dev) is called for devices associated with a class
- that has such a method. Implementations may sleep.
-
- This reverses the effects of class.suspend(), and would usually
- reactivate the device's I/O queue.
-
-At the end of those phases, drivers should normally be as functional as
-they were before suspending: I/O can be performed using DMA and IRQs, and
-the relevant clocks are gated on. The device need not be "fully on"; it
-might be in a runtime lowpower/suspend state that acts as if it were.
-
-However, the details here may again be platform-specific. For example,
-some systems support multiple "run" states, and the mode in effect at
-the end of resume() might not be the one which preceded suspension.
-That means availability of certain clocks or power supplies changed,
-which could easily affect how a driver works.
-
-
-Drivers need to be able to handle hardware which has been reset since the
-suspend methods were called, for example by complete reinitialization.
-This may be the hardest part, and the one most protected by NDA'd documents
-and chip errata. It's simplest if the hardware state hasn't changed since
-the suspend() was called, but that can't always be guaranteed.
-
-Drivers must also be prepared to notice that the device has been removed
-while the system was powered off, whenever that's physically possible.
-PCMCIA, MMC, USB, Firewire, SCSI, and even IDE are common examples of busses
-where common Linux platforms will see such removal. Details of how drivers
-will notice and handle such removals are currently bus-specific, and often
-involve a separate thread.
-
-
-Note that the bus-specific runtime PM wakeup mechanism can exist, and might
-be defined to share some of the same driver code as for system wakeup. For
-example, a bus-specific device driver's resume() method might be used there,
-so it wouldn't only be called from bus.resume() during system-wide wakeup.
-See bus-specific information about how runtime wakeup events are handled.
-
-
-System Devices
---------------
-System devices follow a slightly different API, which can be found in
-
- include/linux/sysdev.h
- drivers/base/sys.c
-
-System devices will only be suspended with interrupts disabled, and after
-all other devices have been suspended. On resume, they will be resumed
-before any other devices, and also with interrupts disabled.
-
-That is, IRQs are disabled, the suspend_late() phase begins, then the
-sysdev_driver.suspend() phase, and the system enters a sleep state. Then
-the sysdev_driver.resume() phase begins, followed by the resume_early()
-phase, after which IRQs are enabled.
-
-Code to actually enter and exit the system-wide low power state sometimes
-involves hardware details that are only known to the boot firmware, and
-may leave a CPU running software (from SRAM or flash memory) that monitors
-the system and manages its wakeup sequence.
+For details refer to Documentation/power/notifiers.txt.
Runtime Power Management
@@ -407,82 +585,23 @@ running. This feature is useful for devices that are not being used, and
can offer significant power savings on a running system. These devices
often support a range of runtime power states, which might use names such
as "off", "sleep", "idle", "active", and so on. Those states will in some
-cases (like PCI) be partially constrained by a bus the device uses, and will
+cases (like PCI) be partially constrained by the bus the device uses, and will
usually include hardware states that are also used in system sleep states.
-However, note that if a driver puts a device into a runtime low power state
-and the system then goes into a system-wide sleep state, it normally ought
-to resume into that runtime low power state rather than "full on". Such
-distinctions would be part of the driver-internal state machine for that
-hardware; the whole point of runtime power management is to be sure that
-drivers are decoupled in that way from the state machine governing phases
-of the system-wide power/sleep state transitions.
-
-
-Power Saving Techniques
------------------------
-Normally runtime power management is handled by the drivers without specific
-userspace or kernel intervention, by device-aware use of techniques like:
-
- Using information provided by other system layers
- - stay deeply "off" except between open() and close()
- - if transceiver/PHY indicates "nobody connected", stay "off"
- - application protocols may include power commands or hints
-
- Using fewer CPU cycles
- - using DMA instead of PIO
- - removing timers, or making them lower frequency
- - shortening "hot" code paths
- - eliminating cache misses
- - (sometimes) offloading work to device firmware
-
- Reducing other resource costs
- - gating off unused clocks in software (or hardware)
- - switching off unused power supplies
- - eliminating (or delaying/merging) IRQs
- - tuning DMA to use word and/or burst modes
-
- Using device-specific low power states
- - using lower voltages
- - avoiding needless DMA transfers
-
-Read your hardware documentation carefully to see the opportunities that
-may be available. If you can, measure the actual power usage and check
-it against the budget established for your project.
-
-
-Examples: USB hosts, system timer, system CPU
-----------------------------------------------
-USB host controllers make interesting, if complex, examples. In many cases
-these have no work to do: no USB devices are connected, or all of them are
-in the USB "suspend" state. Linux host controller drivers can then disable
-periodic DMA transfers that would otherwise be a constant power drain on the
-memory subsystem, and enter a suspend state. In power-aware controllers,
-entering that suspend state may disable the clock used with USB signaling,
-saving a certain amount of power.
-
-The controller will be woken from that state (with an IRQ) by changes to the
-signal state on the data lines of a given port, for example by an existing
-peripheral requesting "remote wakeup" or by plugging a new peripheral. The
-same wakeup mechanism usually works from "standby" sleep states, and on some
-systems also from "suspend to RAM" (or even "suspend to disk") states.
-(Except that ACPI may be involved instead of normal IRQs, on some hardware.)
-
-System devices like timers and CPUs may have special roles in the platform
-power management scheme. For example, system timers using a "dynamic tick"
-approach don't just save CPU cycles (by eliminating needless timer IRQs),
-but they may also open the door to using lower power CPU "idle" states that
-cost more than a jiffie to enter and exit. On x86 systems these are states
-like "C3"; note that periodic DMA transfers from a USB host controller will
-also prevent entry to a C3 state, much like a periodic timer IRQ.
-
-That kind of runtime mechanism interaction is common. "System On Chip" (SOC)
-processors often have low power idle modes that can't be entered unless
-certain medium-speed clocks (often 12 or 48 MHz) are gated off. When the
-drivers gate those clocks effectively, then the system idle task may be able
-to use the lower power idle modes and thereby increase battery life.
-
-If the CPU can have a "cpufreq" driver, there also may be opportunities
-to shift to lower voltage settings and reduce the power cost of executing
-a given number of instructions. (Without voltage adjustment, it's rare
-for cpufreq to save much power; the cost-per-instruction must go down.)
+A system-wide power transition can be started while some devices are in low
+power states due to runtime power management. The system sleep PM callbacks
+should recognize such situations and react to them appropriately, but the
+necessary actions are subsystem-specific.
+
+In some cases the decision may be made at the subsystem level while in other
+cases the device driver may be left to decide. In some cases it may be
+desirable to leave a suspended device in that state during a system-wide power
+transition, but in other cases the device must be put back into the full-power
+state temporarily, for example so that its system wakeup capability can be
+disabled. This all depends on the hardware and the design of the subsystem and
+device driver in question.
+
+During system-wide resume from a sleep state it's best to put devices into the
+full-power state, as explained in Documentation/power/runtime_pm.txt. Refer to
+that document for more information regarding this particular issue as well as
+for information on the device runtime power management framework in general.
diff --git a/Documentation/power/pci.txt b/Documentation/power/pci.txt
index dd8fe43888d..62328d76b55 100644
--- a/Documentation/power/pci.txt
+++ b/Documentation/power/pci.txt
@@ -1,299 +1,1025 @@
-
PCI Power Management
-~~~~~~~~~~~~~~~~~~~~
-An overview of the concepts and the related functions in the Linux kernel
+Copyright (c) 2010 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
+
+An overview of concepts and the Linux kernel's interfaces related to PCI power
+management. Based on previous work by Patrick Mochel <mochel@transmeta.com>
+(and others).
-Patrick Mochel <mochel@transmeta.com>
-(and others)
+This document only covers the aspects of power management specific to PCI
+devices. For general description of the kernel's interfaces related to device
+power management refer to Documentation/power/devices.txt and
+Documentation/power/runtime_pm.txt.
---------------------------------------------------------------------------
-1. Overview
-2. How the PCI Subsystem Does Power Management
-3. PCI Utility Functions
-4. PCI Device Drivers
-5. Resources
-
-1. Overview
-~~~~~~~~~~~
-
-The PCI Power Management Specification was introduced between the PCI 2.1 and
-PCI 2.2 Specifications. It a standard interface for controlling various
-power management operations.
-
-Implementation of the PCI PM Spec is optional, as are several sub-components of
-it. If a device supports the PCI PM Spec, the device will have an 8 byte
-capability field in its PCI configuration space. This field is used to describe
-and control the standard PCI power management features.
-
-The PCI PM spec defines 4 operating states for devices (D0 - D3) and for buses
-(B0 - B3). The higher the number, the less power the device consumes. However,
-the higher the number, the longer the latency is for the device to return to
-an operational state (D0).
-
-There are actually two D3 states. When someone talks about D3, they usually
-mean D3hot, which corresponds to an ACPI D2 state (power is reduced, the
-device may lose some context). But they may also mean D3cold, which is an
-ACPI D3 state (power is fully off, all state was discarded); or both.
-
-Bus power management is not covered in this version of this document.
-
-Note that all PCI devices support D0 and D3cold by default, regardless of
-whether or not they implement any of the PCI PM spec.
-
-The possible state transitions that a device can undergo are:
-
-+---------------------------+
-| Current State | New State |
-+---------------------------+
-| D0 | D1, D2, D3|
-+---------------------------+
-| D1 | D2, D3 |
-+---------------------------+
-| D2 | D3 |
-+---------------------------+
-| D1, D2, D3 | D0 |
-+---------------------------+
-
-Note that when the system is entering a global suspend state, all devices will
-be placed into D3 and when resuming, all devices will be placed into D0.
-However, when the system is running, other state transitions are possible.
-
-2. How The PCI Subsystem Handles Power Management
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The PCI suspend/resume functionality is accessed indirectly via the Power
-Management subsystem. At boot, the PCI driver registers a power management
-callback with that layer. Upon entering a suspend state, the PM layer iterates
-through all of its registered callbacks. This currently takes place only during
-APM state transitions.
-
-Upon going to sleep, the PCI subsystem walks its device tree twice. Both times,
-it does a depth first walk of the device tree. The first walk saves each of the
-device's state and checks for devices that will prevent the system from entering
-a global power state. The next walk then places the devices in a low power
+1. Hardware and Platform Support for PCI Power Management
+2. PCI Subsystem and Device Power Management
+3. PCI Device Drivers and Power Management
+4. Resources
+
+
+1. Hardware and Platform Support for PCI Power Management
+=========================================================
+
+1.1. Native and Platform-Based Power Management
+-----------------------------------------------
+In general, power management is a feature allowing one to save energy by putting
+devices into states in which they draw less power (low-power states) at the
+price of reduced functionality or performance.
+
+Usually, a device is put into a low-power state when it is underutilized or
+completely inactive. However, when it is necessary to use the device once
+again, it has to be put back into the "fully functional" state (full-power
+state). This may happen when there are some data for the device to handle or
+as a result of an external event requiring the device to be active, which may
+be signaled by the device itself.
+
+PCI devices may be put into low-power states in two ways, by using the device
+capabilities introduced by the PCI Bus Power Management Interface Specification,
+or with the help of platform firmware, such as an ACPI BIOS. In the first
+approach, that is referred to as the native PCI power management (native PCI PM)
+in what follows, the device power state is changed as a result of writing a
+specific value into one of its standard configuration registers. The second
+approach requires the platform firmware to provide special methods that may be
+used by the kernel to change the device's power state.
+
+Devices supporting the native PCI PM usually can generate wakeup signals called
+Power Management Events (PMEs) to let the kernel know about external events
+requiring the device to be active. After receiving a PME the kernel is supposed
+to put the device that sent it into the full-power state. However, the PCI Bus
+Power Management Interface Specification doesn't define any standard method of
+delivering the PME from the device to the CPU and the operating system kernel.
+It is assumed that the platform firmware will perform this task and therefore,
+even though a PCI device is set up to generate PMEs, it also may be necessary to
+prepare the platform firmware for notifying the CPU of the PMEs coming from the
+device (e.g. by generating interrupts).
+
+In turn, if the methods provided by the platform firmware are used for changing
+the power state of a device, usually the platform also provides a method for
+preparing the device to generate wakeup signals. In that case, however, it
+often also is necessary to prepare the device for generating PMEs using the
+native PCI PM mechanism, because the method provided by the platform depends on
+that.
+
+Thus in many situations both the native and the platform-based power management
+mechanisms have to be used simultaneously to obtain the desired result.
+
+1.2. Native PCI Power Management
+--------------------------------
+The PCI Bus Power Management Interface Specification (PCI PM Spec) was
+introduced between the PCI 2.1 and PCI 2.2 Specifications. It defined a
+standard interface for performing various operations related to power
+management.
+
+The implementation of the PCI PM Spec is optional for conventional PCI devices,
+but it is mandatory for PCI Express devices. If a device supports the PCI PM
+Spec, it has an 8 byte power management capability field in its PCI
+configuration space. This field is used to describe and control the standard
+features related to the native PCI power management.
+
+The PCI PM Spec defines 4 operating states for devices (D0-D3) and for buses
+(B0-B3). The higher the number, the less power is drawn by the device or bus
+in that state. However, the higher the number, the longer the latency for
+the device or bus to return to the full-power state (D0 or B0, respectively).
+
+There are two variants of the D3 state defined by the specification. The first
+one is D3hot, referred to as the software accessible D3, because devices can be
+programmed to go into it. The second one, D3cold, is the state that PCI devices
+are in when the supply voltage (Vcc) is removed from them. It is not possible
+to program a PCI device to go into D3cold, although there may be a programmable
+interface for putting the bus the device is on into a state in which Vcc is
+removed from all devices on the bus.
+
+PCI bus power management, however, is not supported by the Linux kernel at the
+time of this writing and therefore it is not covered by this document.
+
+Note that every PCI device can be in the full-power state (D0) or in D3cold,
+regardless of whether or not it implements the PCI PM Spec. In addition to
+that, if the PCI PM Spec is implemented by the device, it must support D3hot
+as well as D0. The support for the D1 and D2 power states is optional.
+
+PCI devices supporting the PCI PM Spec can be programmed to go to any of the
+supported low-power states (except for D3cold). While in D1-D3hot the
+standard configuration registers of the device must be accessible to software
+(i.e. the device is required to respond to PCI configuration accesses), although
+its I/O and memory spaces are then disabled. This allows the device to be
+programmatically put into D0. Thus the kernel can switch the device back and
+forth between D0 and the supported low-power states (except for D3cold) and the
+possible power state transitions the device can undergo are the following:
+
++----------------------------+
+| Current State | New State |
++----------------------------+
+| D0 | D1, D2, D3 |
++----------------------------+
+| D1 | D2, D3 |
++----------------------------+
+| D2 | D3 |
++----------------------------+
+| D1, D2, D3 | D0 |
++----------------------------+
+
+The transition from D3cold to D0 occurs when the supply voltage is provided to
+the device (i.e. power is restored). In that case the device returns to D0 with
+a full power-on reset sequence and the power-on defaults are restored to the
+device by hardware just as at initial power up.
+
+PCI devices supporting the PCI PM Spec can be programmed to generate PMEs
+while in a low-power state (D1-D3), but they are not required to be capable
+of generating PMEs from all supported low-power states. In particular, the
+capability of generating PMEs from D3cold is optional and depends on the
+presence of additional voltage (3.3Vaux) allowing the device to remain
+sufficiently active to generate a wakeup signal.
+
+1.3. ACPI Device Power Management
+---------------------------------
+The platform firmware support for the power management of PCI devices is
+system-specific. However, if the system in question is compliant with the
+Advanced Configuration and Power Interface (ACPI) Specification, like the
+majority of x86-based systems, it is supposed to implement device power
+management interfaces defined by the ACPI standard.
+
+For this purpose the ACPI BIOS provides special functions called "control
+methods" that may be executed by the kernel to perform specific tasks, such as
+putting a device into a low-power state. These control methods are encoded
+using special byte-code language called the ACPI Machine Language (AML) and
+stored in the machine's BIOS. The kernel loads them from the BIOS and executes
+them as needed using an AML interpreter that translates the AML byte code into
+computations and memory or I/O space accesses. This way, in theory, a BIOS
+writer can provide the kernel with a means to perform actions depending
+on the system design in a system-specific fashion.
+
+ACPI control methods may be divided into global control methods, that are not
+associated with any particular devices, and device control methods, that have
+to be defined separately for each device supposed to be handled with the help of
+the platform. This means, in particular, that ACPI device control methods can
+only be used to handle devices that the BIOS writer knew about in advance. The
+ACPI methods used for device power management fall into that category.
+
+The ACPI specification assumes that devices can be in one of four power states
+labeled as D0, D1, D2, and D3 that roughly correspond to the native PCI PM
+D0-D3 states (although the difference between D3hot and D3cold is not taken
+into account by ACPI). Moreover, for each power state of a device there is a
+set of power resources that have to be enabled for the device to be put into
+that state. These power resources are controlled (i.e. enabled or disabled)
+with the help of their own control methods, _ON and _OFF, that have to be
+defined individually for each of them.
+
+To put a device into the ACPI power state Dx (where x is a number between 0 and
+3 inclusive) the kernel is supposed to (1) enable the power resources required
+by the device in this state using their _ON control methods and (2) execute the
+_PSx control method defined for the device. In addition to that, if the device
+is going to be put into a low-power state (D1-D3) and is supposed to generate
+wakeup signals from that state, the _DSW (or _PSW, replaced with _DSW by ACPI
+3.0) control method defined for it has to be executed before _PSx. Power
+resources that are not required by the device in the target power state and are
+not required any more by any other device should be disabled (by executing their
+_OFF control methods). If the current power state of the device is D3, it can
+only be put into D0 this way.
+
+However, quite often the power states of devices are changed during a
+system-wide transition into a sleep state or back into the working state. ACPI
+defines four system sleep states, S1, S2, S3, and S4, and denotes the system
+working state as S0. In general, the target system sleep (or working) state
+determines the highest power (lowest number) state the device can be put
+into and the kernel is supposed to obtain this information by executing the
+device's _SxD control method (where x is a number between 0 and 4 inclusive).
+If the device is required to wake up the system from the target sleep state, the
+lowest power (highest number) state it can be put into is also determined by the
+target state of the system. The kernel is then supposed to use the device's
+_SxW control method to obtain the number of that state. It also is supposed to
+use the device's _PRW control method to learn which power resources need to be
+enabled for the device to be able to generate wakeup signals.
+
+1.4. Wakeup Signaling
+---------------------
+Wakeup signals generated by PCI devices, either as native PCI PMEs, or as
+a result of the execution of the _DSW (or _PSW) ACPI control method before
+putting the device into a low-power state, have to be caught and handled as
+appropriate. If they are sent while the system is in the working state
+(ACPI S0), they should be translated into interrupts so that the kernel can
+put the devices generating them into the full-power state and take care of the
+events that triggered them. In turn, if they are sent while the system is
+sleeping, they should cause the system's core logic to trigger wakeup.
+
+On ACPI-based systems wakeup signals sent by conventional PCI devices are
+converted into ACPI General-Purpose Events (GPEs) which are hardware signals
+from the system core logic generated in response to various events that need to
+be acted upon. Every GPE is associated with one or more sources of potentially
+interesting events. In particular, a GPE may be associated with a PCI device
+capable of signaling wakeup. The information on the connections between GPEs
+and event sources is recorded in the system's ACPI BIOS from where it can be
+read by the kernel.
+
+If a PCI device known to the system's ACPI BIOS signals wakeup, the GPE
+associated with it (if there is one) is triggered. The GPEs associated with PCI
+bridges may also be triggered in response to a wakeup signal from one of the
+devices below the bridge (this also is the case for root bridges) and, for
+example, native PCI PMEs from devices unknown to the system's ACPI BIOS may be
+handled this way.
+
+A GPE may be triggered when the system is sleeping (i.e. when it is in one of
+the ACPI S1-S4 states), in which case system wakeup is started by its core logic
+(the device that was the source of the signal causing the system wakeup to occur
+may be identified later). The GPEs used in such situations are referred to as
+wakeup GPEs.
+
+Usually, however, GPEs are also triggered when the system is in the working
+state (ACPI S0) and in that case the system's core logic generates a System
+Control Interrupt (SCI) to notify the kernel of the event. Then, the SCI
+handler identifies the GPE that caused the interrupt to be generated which,
+in turn, allows the kernel to identify the source of the event (that may be
+a PCI device signaling wakeup). The GPEs used for notifying the kernel of
+events occurring while the system is in the working state are referred to as
+runtime GPEs.
+
+Unfortunately, there is no standard way of handling wakeup signals sent by
+conventional PCI devices on systems that are not ACPI-based, but there is one
+for PCI Express devices. Namely, the PCI Express Base Specification introduced
+a native mechanism for converting native PCI PMEs into interrupts generated by
+root ports. For conventional PCI devices native PMEs are out-of-band, so they
+are routed separately and they need not pass through bridges (in principle they
+may be routed directly to the system's core logic), but for PCI Express devices
+they are in-band messages that have to pass through the PCI Express hierarchy,
+including the root port on the path from the device to the Root Complex. Thus
+it was possible to introduce a mechanism by which a root port generates an
+interrupt whenever it receives a PME message from one of the devices below it.
+The PCI Express Requester ID of the device that sent the PME message is then
+recorded in one of the root port's configuration registers from where it may be
+read by the interrupt handler allowing the device to be identified. [PME
+messages sent by PCI Express endpoints integrated with the Root Complex don't
+pass through root ports, but instead they cause a Root Complex Event Collector
+(if there is one) to generate interrupts.]
+
+In principle the native PCI Express PME signaling may also be used on ACPI-based
+systems along with the GPEs, but to use it the kernel has to ask the system's
+ACPI BIOS to release control of root port configuration registers. The ACPI
+BIOS, however, is not required to allow the kernel to control these registers
+and if it doesn't do that, the kernel must not modify their contents. Of course
+the native PCI Express PME signaling cannot be used by the kernel in that case.
+
+
+2. PCI Subsystem and Device Power Management
+============================================
+
+2.1. Device Power Management Callbacks
+--------------------------------------
+The PCI Subsystem participates in the power management of PCI devices in a
+number of ways. First of all, it provides an intermediate code layer between
+the device power management core (PM core) and PCI device drivers.
+Specifically, the pm field of the PCI subsystem's struct bus_type object,
+pci_bus_type, points to a struct dev_pm_ops object, pci_dev_pm_ops, containing
+pointers to several device power management callbacks:
+
+const struct dev_pm_ops pci_dev_pm_ops = {
+ .prepare = pci_pm_prepare,
+ .complete = pci_pm_complete,
+ .suspend = pci_pm_suspend,
+ .resume = pci_pm_resume,
+ .freeze = pci_pm_freeze,
+ .thaw = pci_pm_thaw,
+ .poweroff = pci_pm_poweroff,
+ .restore = pci_pm_restore,
+ .suspend_noirq = pci_pm_suspend_noirq,
+ .resume_noirq = pci_pm_resume_noirq,
+ .freeze_noirq = pci_pm_freeze_noirq,
+ .thaw_noirq = pci_pm_thaw_noirq,
+ .poweroff_noirq = pci_pm_poweroff_noirq,
+ .restore_noirq = pci_pm_restore_noirq,
+ .runtime_suspend = pci_pm_runtime_suspend,
+ .runtime_resume = pci_pm_runtime_resume,
+ .runtime_idle = pci_pm_runtime_idle,
+};
+
+These callbacks are executed by the PM core in various situations related to
+device power management and they, in turn, execute power management callbacks
+provided by PCI device drivers. They also perform power management operations
+involving some standard configuration registers of PCI devices that device
+drivers need not know or care about.
+
+The structure representing a PCI device, struct pci_dev, contains several fields
+that these callbacks operate on:
+
+struct pci_dev {
+ ...
+ pci_power_t current_state; /* Current operating state. */
+ int pm_cap; /* PM capability offset in the
+ configuration space */
+ unsigned int pme_support:5; /* Bitmask of states from which PME#
+ can be generated */
+ unsigned int pme_interrupt:1;/* Is native PCIe PME signaling used? */
+ unsigned int d1_support:1; /* Low power state D1 is supported */
+ unsigned int d2_support:1; /* Low power state D2 is supported */
+ unsigned int no_d1d2:1; /* D1 and D2 are forbidden */
+ unsigned int wakeup_prepared:1; /* Device prepared for wake up */
+ unsigned int d3_delay; /* D3->D0 transition time in ms */
+ ...
+};
+
+They also indirectly use some fields of the struct device that is embedded in
+struct pci_dev.
+
+2.2. Device Initialization
+--------------------------
+The PCI subsystem's first task related to device power management is to
+prepare the device for power management and initialize the fields of struct
+pci_dev used for this purpose. This happens in two functions defined in
+drivers/pci/pci.c, pci_pm_init() and platform_pci_wakeup_init().
+
+The first of these functions checks if the device supports native PCI PM
+and if that's the case the offset of its power management capability structure
+in the configuration space is stored in the pm_cap field of the device's struct
+pci_dev object. Next, the function checks which PCI low-power states are
+supported by the device and from which low-power states the device can generate
+native PCI PMEs. The power management fields of the device's struct pci_dev and
+the struct device embedded in it are updated accordingly and the generation of
+PMEs by the device is disabled.
+
+The second function checks if the device can be prepared to signal wakeup with
+the help of the platform firmware, such as the ACPI BIOS. If that is the case,
+the function updates the wakeup fields in struct device embedded in the
+device's struct pci_dev and uses the firmware-provided method to prevent the
+device from signaling wakeup.
+
+At this point the device is ready for power management. For driverless devices,
+however, this functionality is limited to a few basic operations carried out
+during system-wide transitions to a sleep state and back to the working state.
+
+2.3. Runtime Device Power Management
+------------------------------------
+The PCI subsystem plays a vital role in the runtime power management of PCI
+devices. For this purpose it uses the general runtime power management
+(runtime PM) framework described in Documentation/power/runtime_pm.txt.
+Namely, it provides subsystem-level callbacks:
+
+ pci_pm_runtime_suspend()
+ pci_pm_runtime_resume()
+ pci_pm_runtime_idle()
+
+that are executed by the core runtime PM routines. It also implements the
+entire mechanics necessary for handling runtime wakeup signals from PCI devices
+in low-power states, which at the time of this writing works for both the native
+PCI Express PME signaling and the ACPI GPE-based wakeup signaling described in
+Section 1.
+
+First, a PCI device is put into a low-power state, or suspended, with the help
+of pm_schedule_suspend() or pm_runtime_suspend() which for PCI devices call
+pci_pm_runtime_suspend() to do the actual job. For this to work, the device's
+driver has to provide a pm->runtime_suspend() callback (see below), which is
+run by pci_pm_runtime_suspend() as the first action. If the driver's callback
+returns successfully, the device's standard configuration registers are saved,
+the device is prepared to generate wakeup signals and, finally, it is put into
+the target low-power state.
+
+The low-power state to put the device into is the lowest-power (highest number)
+state from which it can signal wakeup. The exact method of signaling wakeup is
+system-dependent and is determined by the PCI subsystem on the basis of the
+reported capabilities of the device and the platform firmware. To prepare the
+device for signaling wakeup and put it into the selected low-power state, the
+PCI subsystem can use the platform firmware as well as the device's native PCI
+PM capabilities, if supported.
+
+It is expected that the device driver's pm->runtime_suspend() callback will
+not attempt to prepare the device for signaling wakeup or to put it into a
+low-power state. The driver ought to leave these tasks to the PCI subsystem
+that has all of the information necessary to perform them.
+
+A suspended device is brought back into the "active" state, or resumed,
+with the help of pm_request_resume() or pm_runtime_resume() which both call
+pci_pm_runtime_resume() for PCI devices. Again, this only works if the device's
+driver provides a pm->runtime_resume() callback (see below). However, before
+the driver's callback is executed, pci_pm_runtime_resume() brings the device
+back into the full-power state, prevents it from signaling wakeup while in that
+state and restores its standard configuration registers. Thus the driver's
+callback need not worry about the PCI-specific aspects of the device resume.
+
+Note that generally pci_pm_runtime_resume() may be called in two different
+situations. First, it may be called at the request of the device's driver, for
+example if there are some data for it to process. Second, it may be called
+as a result of a wakeup signal from the device itself (this sometimes is
+referred to as "remote wakeup"). Of course, for this purpose the wakeup signal
+is handled in one of the ways described in Section 1 and finally converted into
+a notification for the PCI subsystem after the source device has been
+identified.
+
+The pci_pm_runtime_idle() function, called for PCI devices by pm_runtime_idle()
+and pm_request_idle(), executes the device driver's pm->runtime_idle()
+callback, if defined, and if that callback doesn't return error code (or is not
+present at all), suspends the device with the help of pm_runtime_suspend().
+Sometimes pci_pm_runtime_idle() is called automatically by the PM core (for
+example, it is called right after the device has just been resumed), in which
+cases it is expected to suspend the device if that makes sense. Usually,
+however, the PCI subsystem doesn't really know if the device really can be
+suspended, so it lets the device's driver decide by running its
+pm->runtime_idle() callback.
+
+2.4. System-Wide Power Transitions
+----------------------------------
+There are a few different types of system-wide power transitions, described in
+Documentation/power/devices.txt. Each of them requires devices to be handled
+in a specific way and the PM core executes subsystem-level power management
+callbacks for this purpose. They are executed in phases such that each phase
+involves executing the same subsystem-level callback for every device belonging
+to the given subsystem before the next phase begins. These phases always run
+after tasks have been frozen.
+
+2.4.1. System Suspend
+
+When the system is going into a sleep state in which the contents of memory will
+be preserved, such as one of the ACPI sleep states S1-S3, the phases are:
+
+ prepare, suspend, suspend_noirq.
+
+The following PCI bus type's callbacks, respectively, are used in these phases:
+
+ pci_pm_prepare()
+ pci_pm_suspend()
+ pci_pm_suspend_noirq()
+
+The pci_pm_prepare() routine first puts the device into the "fully functional"
+state with the help of pm_runtime_resume(). Then, it executes the device
+driver's pm->prepare() callback if defined (i.e. if the driver's struct
+dev_pm_ops object is present and the prepare pointer in that object is valid).
+
+The pci_pm_suspend() routine first checks if the device's driver implements
+legacy PCI suspend routines (see Section 3), in which case the driver's legacy
+suspend callback is executed, if present, and its result is returned. Next, if
+the device's driver doesn't provide a struct dev_pm_ops object (containing
+pointers to the driver's callbacks), pci_pm_default_suspend() is called, which
+simply turns off the device's bus master capability and runs
+pcibios_disable_device() to disable it, unless the device is a bridge (PCI
+bridges are ignored by this routine). Next, the device driver's pm->suspend()
+callback is executed, if defined, and its result is returned if it fails.
+Finally, pci_fixup_device() is called to apply hardware suspend quirks related
+to the device if necessary.
+
+Note that the suspend phase is carried out asynchronously for PCI devices, so
+the pci_pm_suspend() callback may be executed in parallel for any pair of PCI
+devices that don't depend on each other in a known way (i.e. none of the paths
+in the device tree from the root bridge to a leaf device contains both of them).
+
+The pci_pm_suspend_noirq() routine is executed after suspend_device_irqs() has
+been called, which means that the device driver's interrupt handler won't be
+invoked while this routine is running. It first checks if the device's driver
+implements legacy PCI suspends routines (Section 3), in which case the legacy
+late suspend routine is called and its result is returned (the standard
+configuration registers of the device are saved if the driver's callback hasn't
+done that). Second, if the device driver's struct dev_pm_ops object is not
+present, the device's standard configuration registers are saved and the routine
+returns success. Otherwise the device driver's pm->suspend_noirq() callback is
+executed, if present, and its result is returned if it fails. Next, if the
+device's standard configuration registers haven't been saved yet (one of the
+device driver's callbacks executed before might do that), pci_pm_suspend_noirq()
+saves them, prepares the device to signal wakeup (if necessary) and puts it into
+a low-power state.
+
+The low-power state to put the device into is the lowest-power (highest number)
+state from which it can signal wakeup while the system is in the target sleep
+state. Just like in the runtime PM case described above, the mechanism of
+signaling wakeup is system-dependent and determined by the PCI subsystem, which
+is also responsible for preparing the device to signal wakeup from the system's
+target sleep state as appropriate.
+
+PCI device drivers (that don't implement legacy power management callbacks) are
+generally not expected to prepare devices for signaling wakeup or to put them
+into low-power states. However, if one of the driver's suspend callbacks
+(pm->suspend() or pm->suspend_noirq()) saves the device's standard configuration
+registers, pci_pm_suspend_noirq() will assume that the device has been prepared
+to signal wakeup and put into a low-power state by the driver (the driver is
+then assumed to have used the helper functions provided by the PCI subsystem for
+this purpose). PCI device drivers are not encouraged to do that, but in some
+rare cases doing that in the driver may be the optimum approach.
+
+2.4.2. System Resume
+
+When the system is undergoing a transition from a sleep state in which the
+contents of memory have been preserved, such as one of the ACPI sleep states
+S1-S3, into the working state (ACPI S0), the phases are:
+
+ resume_noirq, resume, complete.
+
+The following PCI bus type's callbacks, respectively, are executed in these
+phases:
+
+ pci_pm_resume_noirq()
+ pci_pm_resume()
+ pci_pm_complete()
+
+The pci_pm_resume_noirq() routine first puts the device into the full-power
+state, restores its standard configuration registers and applies early resume
+hardware quirks related to the device, if necessary. This is done
+unconditionally, regardless of whether or not the device's driver implements
+legacy PCI power management callbacks (this way all PCI devices are in the
+full-power state and their standard configuration registers have been restored
+when their interrupt handlers are invoked for the first time during resume,
+which allows the kernel to avoid problems with the handling of shared interrupts
+by drivers whose devices are still suspended). If legacy PCI power management
+callbacks (see Section 3) are implemented by the device's driver, the legacy
+early resume callback is executed and its result is returned. Otherwise, the
+device driver's pm->resume_noirq() callback is executed, if defined, and its
+result is returned.
+
+The pci_pm_resume() routine first checks if the device's standard configuration
+registers have been restored and restores them if that's not the case (this
+only is necessary in the error path during a failing suspend). Next, resume
+hardware quirks related to the device are applied, if necessary, and if the
+device's driver implements legacy PCI power management callbacks (see
+Section 3), the driver's legacy resume callback is executed and its result is
+returned. Otherwise, the device's wakeup signaling mechanisms are blocked and
+its driver's pm->resume() callback is executed, if defined (the callback's
+result is then returned).
+
+The resume phase is carried out asynchronously for PCI devices, like the
+suspend phase described above, which means that if two PCI devices don't depend
+on each other in a known way, the pci_pm_resume() routine may be executed for
+the both of them in parallel.
+
+The pci_pm_complete() routine only executes the device driver's pm->complete()
+callback, if defined.
+
+2.4.3. System Hibernation
+
+System hibernation is more complicated than system suspend, because it requires
+a system image to be created and written into a persistent storage medium. The
+image is created atomically and all devices are quiesced, or frozen, before that
+happens.
+
+The freezing of devices is carried out after enough memory has been freed (at
+the time of this writing the image creation requires at least 50% of system RAM
+to be free) in the following three phases:
+
+ prepare, freeze, freeze_noirq
+
+that correspond to the PCI bus type's callbacks:
+
+ pci_pm_prepare()
+ pci_pm_freeze()
+ pci_pm_freeze_noirq()
+
+This means that the prepare phase is exactly the same as for system suspend.
+The other two phases, however, are different.
+
+The pci_pm_freeze() routine is quite similar to pci_pm_suspend(), but it runs
+the device driver's pm->freeze() callback, if defined, instead of pm->suspend(),
+and it doesn't apply the suspend-related hardware quirks. It is executed
+asynchronously for different PCI devices that don't depend on each other in a
+known way.
+
+The pci_pm_freeze_noirq() routine, in turn, is similar to
+pci_pm_suspend_noirq(), but it calls the device driver's pm->freeze_noirq()
+routine instead of pm->suspend_noirq(). It also doesn't attempt to prepare the
+device for signaling wakeup and put it into a low-power state. Still, it saves
+the device's standard configuration registers if they haven't been saved by one
+of the driver's callbacks.
+
+Once the image has been created, it has to be saved. However, at this point all
+devices are frozen and they cannot handle I/O, while their ability to handle
+I/O is obviously necessary for the image saving. Thus they have to be brought
+back to the fully functional state and this is done in the following phases:
+
+ thaw_noirq, thaw, complete
+
+using the following PCI bus type's callbacks:
+
+ pci_pm_thaw_noirq()
+ pci_pm_thaw()
+ pci_pm_complete()
+
+respectively.
+
+The first of them, pci_pm_thaw_noirq(), is analogous to pci_pm_resume_noirq(),
+but it doesn't put the device into the full power state and doesn't attempt to
+restore its standard configuration registers. It also executes the device
+driver's pm->thaw_noirq() callback, if defined, instead of pm->resume_noirq().
+
+The pci_pm_thaw() routine is similar to pci_pm_resume(), but it runs the device
+driver's pm->thaw() callback instead of pm->resume(). It is executed
+asynchronously for different PCI devices that don't depend on each other in a
+known way.
+
+The complete phase it the same as for system resume.
+
+After saving the image, devices need to be powered down before the system can
+enter the target sleep state (ACPI S4 for ACPI-based systems). This is done in
+three phases:
+
+ prepare, poweroff, poweroff_noirq
+
+where the prepare phase is exactly the same as for system suspend. The other
+two phases are analogous to the suspend and suspend_noirq phases, respectively.
+The PCI subsystem-level callbacks they correspond to
+
+ pci_pm_poweroff()
+ pci_pm_poweroff_noirq()
+
+work in analogy with pci_pm_suspend() and pci_pm_poweroff_noirq(), respectively,
+although they don't attempt to save the device's standard configuration
+registers.
+
+2.4.4. System Restore
+
+System restore requires a hibernation image to be loaded into memory and the
+pre-hibernation memory contents to be restored before the pre-hibernation system
+activity can be resumed.
+
+As described in Documentation/power/devices.txt, the hibernation image is loaded
+into memory by a fresh instance of the kernel, called the boot kernel, which in
+turn is loaded and run by a boot loader in the usual way. After the boot kernel
+has loaded the image, it needs to replace its own code and data with the code
+and data of the "hibernated" kernel stored within the image, called the image
+kernel. For this purpose all devices are frozen just like before creating
+the image during hibernation, in the
+
+ prepare, freeze, freeze_noirq
+
+phases described above. However, the devices affected by these phases are only
+those having drivers in the boot kernel; other devices will still be in whatever
+state the boot loader left them.
+
+Should the restoration of the pre-hibernation memory contents fail, the boot
+kernel would go through the "thawing" procedure described above, using the
+thaw_noirq, thaw, and complete phases (that will only affect the devices having
+drivers in the boot kernel), and then continue running normally.
+
+If the pre-hibernation memory contents are restored successfully, which is the
+usual situation, control is passed to the image kernel, which then becomes
+responsible for bringing the system back to the working state. To achieve this,
+it must restore the devices' pre-hibernation functionality, which is done much
+like waking up from the memory sleep state, although it involves different
+phases:
+
+ restore_noirq, restore, complete
+
+The first two of these are analogous to the resume_noirq and resume phases
+described above, respectively, and correspond to the following PCI subsystem
+callbacks:
+
+ pci_pm_restore_noirq()
+ pci_pm_restore()
+
+These callbacks work in analogy with pci_pm_resume_noirq() and pci_pm_resume(),
+respectively, but they execute the device driver's pm->restore_noirq() and
+pm->restore() callbacks, if available.
+
+The complete phase is carried out in exactly the same way as during system
+resume.
+
+
+3. PCI Device Drivers and Power Management
+==========================================
+
+3.1. Power Management Callbacks
+-------------------------------
+PCI device drivers participate in power management by providing callbacks to be
+executed by the PCI subsystem's power management routines described above and by
+controlling the runtime power management of their devices.
+
+At the time of this writing there are two ways to define power management
+callbacks for a PCI device driver, the recommended one, based on using a
+dev_pm_ops structure described in Documentation/power/devices.txt, and the
+"legacy" one, in which the .suspend(), .suspend_late(), .resume_early(), and
+.resume() callbacks from struct pci_driver are used. The legacy approach,
+however, doesn't allow one to define runtime power management callbacks and is
+not really suitable for any new drivers. Therefore it is not covered by this
+document (refer to the source code to learn more about it).
+
+It is recommended that all PCI device drivers define a struct dev_pm_ops object
+containing pointers to power management (PM) callbacks that will be executed by
+the PCI subsystem's PM routines in various circumstances. A pointer to the
+driver's struct dev_pm_ops object has to be assigned to the driver.pm field in
+its struct pci_driver object. Once that has happened, the "legacy" PM callbacks
+in struct pci_driver are ignored (even if they are not NULL).
+
+The PM callbacks in struct dev_pm_ops are not mandatory and if they are not
+defined (i.e. the respective fields of struct dev_pm_ops are unset) the PCI
+subsystem will handle the device in a simplified default manner. If they are
+defined, though, they are expected to behave as described in the following
+subsections.
+
+3.1.1. prepare()
+
+The prepare() callback is executed during system suspend, during hibernation
+(when a hibernation image is about to be created), during power-off after
+saving a hibernation image and during system restore, when a hibernation image
+has just been loaded into memory.
+
+This callback is only necessary if the driver's device has children that in
+general may be registered at any time. In that case the role of the prepare()
+callback is to prevent new children of the device from being registered until
+one of the resume_noirq(), thaw_noirq(), or restore_noirq() callbacks is run.
+
+In addition to that the prepare() callback may carry out some operations
+preparing the device to be suspended, although it should not allocate memory
+(if additional memory is required to suspend the device, it has to be
+preallocated earlier, for example in a suspend/hibernate notifier as described
+in Documentation/power/notifiers.txt).
+
+3.1.2. suspend()
+
+The suspend() callback is only executed during system suspend, after prepare()
+callbacks have been executed for all devices in the system.
+
+This callback is expected to quiesce the device and prepare it to be put into a
+low-power state by the PCI subsystem. It is not required (in fact it even is
+not recommended) that a PCI driver's suspend() callback save the standard
+configuration registers of the device, prepare it for waking up the system, or
+put it into a low-power state. All of these operations can very well be taken
+care of by the PCI subsystem, without the driver's participation.
+
+However, in some rare case it is convenient to carry out these operations in
+a PCI driver. Then, pci_save_state(), pci_prepare_to_sleep(), and
+pci_set_power_state() should be used to save the device's standard configuration
+registers, to prepare it for system wakeup (if necessary), and to put it into a
+low-power state, respectively. Moreover, if the driver calls pci_save_state(),
+the PCI subsystem will not execute either pci_prepare_to_sleep(), or
+pci_set_power_state() for its device, so the driver is then responsible for
+handling the device as appropriate.
+
+While the suspend() callback is being executed, the driver's interrupt handler
+can be invoked to handle an interrupt from the device, so all suspend-related
+operations relying on the driver's ability to handle interrupts should be
+carried out in this callback.
+
+3.1.3. suspend_noirq()
+
+The suspend_noirq() callback is only executed during system suspend, after
+suspend() callbacks have been executed for all devices in the system and
+after device interrupts have been disabled by the PM core.
+
+The difference between suspend_noirq() and suspend() is that the driver's
+interrupt handler will not be invoked while suspend_noirq() is running. Thus
+suspend_noirq() can carry out operations that would cause race conditions to
+arise if they were performed in suspend().
+
+3.1.4. freeze()
+
+The freeze() callback is hibernation-specific and is executed in two situations,
+during hibernation, after prepare() callbacks have been executed for all devices
+in preparation for the creation of a system image, and during restore,
+after a system image has been loaded into memory from persistent storage and the
+prepare() callbacks have been executed for all devices.
+
+The role of this callback is analogous to the role of the suspend() callback
+described above. In fact, they only need to be different in the rare cases when
+the driver takes the responsibility for putting the device into a low-power
state.
-The first walk allows a graceful recovery in the event of a failure, since none
-of the devices have actually been powered down.
-
-In both walks, in particular the second, all children of a bridge are touched
-before the actual bridge itself. This allows the bridge to retain power while
-its children are being accessed.
-
-Upon resuming from sleep, just the opposite must be true: all bridges must be
-powered on and restored before their children are powered on. This is easily
-accomplished with a breadth-first walk of the PCI device tree.
-
-
-3. PCI Utility Functions
-~~~~~~~~~~~~~~~~~~~~~~~~
-
-These are helper functions designed to be called by individual device drivers.
-Assuming that a device behaves as advertised, these should be applicable in most
-cases. However, results may vary.
-
-Note that these functions are never implicitly called for the driver. The driver
-is always responsible for deciding when and if to call these.
-
-
-pci_save_state
---------------
-
-Usage:
- pci_save_state(struct pci_dev *dev);
-
-Description:
- Save first 64 bytes of PCI config space, along with any additional
- PCI-Express or PCI-X information.
-
-
-pci_restore_state
------------------
-
-Usage:
- pci_restore_state(struct pci_dev *dev);
-
-Description:
- Restore previously saved config space.
-
-
-pci_set_power_state
--------------------
-
-Usage:
- pci_set_power_state(struct pci_dev *dev, pci_power_t state);
-
-Description:
- Transition device to low power state using PCI PM Capabilities
- registers.
-
- Will fail under one of the following conditions:
- - If state is less than current state, but not D0 (illegal transition)
- - Device doesn't support PM Capabilities
- - Device does not support requested state
-
-
-pci_enable_wake
----------------
-
-Usage:
- pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable);
-
-Description:
- Enable device to generate PME# during low power state using PCI PM
- Capabilities.
-
- Checks whether if device supports generating PME# from requested state
- and fail if it does not, unless enable == 0 (request is to disable wake
- events, which is implicit if it doesn't even support it in the first
- place).
-
- Note that the PMC Register in the device's PM Capabilities has a bitmask
- of the states it supports generating PME# from. D3hot is bit 3 and
- D3cold is bit 4. So, while a value of 4 as the state may not seem
- semantically correct, it is.
-
-
-4. PCI Device Drivers
-~~~~~~~~~~~~~~~~~~~~~
-
-These functions are intended for use by individual drivers, and are defined in
-struct pci_driver:
-
- int (*suspend) (struct pci_dev *dev, pm_message_t state);
- int (*resume) (struct pci_dev *dev);
-
-
-suspend
--------
-
-Usage:
-
-if (dev->driver && dev->driver->suspend)
- dev->driver->suspend(dev,state);
-
-A driver uses this function to actually transition the device into a low power
-state. This should include disabling I/O, IRQs, and bus-mastering, as well as
-physically transitioning the device to a lower power state; it may also include
-calls to pci_enable_wake().
-
-Bus mastering may be disabled by doing:
-
-pci_disable_device(dev);
-
-For devices that support the PCI PM Spec, this may be used to set the device's
-power state to match the suspend() parameter:
-
-pci_set_power_state(dev,state);
-
-The driver is also responsible for disabling any other device-specific features
-(e.g blanking screen, turning off on-card memory, etc).
-
-The driver should be sure to track the current state of the device, as it may
-obviate the need for some operations.
-
-The driver should update the current_state field in its pci_dev structure in
-this function, except for PM-capable devices when pci_set_power_state is used.
-
-resume
-------
-
-Usage:
-
-if (dev->driver && dev->driver->resume)
- dev->driver->resume(dev)
+In that cases the freeze() callback should not prepare the device system wakeup
+or put it into a low-power state. Still, either it or freeze_noirq() should
+save the device's standard configuration registers using pci_save_state().
-The resume callback may be called from any power state, and is always meant to
-transition the device to the D0 state.
+3.1.5. freeze_noirq()
-The driver is responsible for reenabling any features of the device that had
-been disabled during previous suspend calls, such as IRQs and bus mastering,
-as well as calling pci_restore_state().
+The freeze_noirq() callback is hibernation-specific. It is executed during
+hibernation, after prepare() and freeze() callbacks have been executed for all
+devices in preparation for the creation of a system image, and during restore,
+after a system image has been loaded into memory and after prepare() and
+freeze() callbacks have been executed for all devices. It is always executed
+after device interrupts have been disabled by the PM core.
-If the device is currently in D3, it may need to be reinitialized in resume().
+The role of this callback is analogous to the role of the suspend_noirq()
+callback described above and it very rarely is necessary to define
+freeze_noirq().
- * Some types of devices, like bus controllers, will preserve context in D3hot
- (using Vcc power). Their drivers will often want to avoid re-initializing
- them after re-entering D0 (perhaps to avoid resetting downstream devices).
+The difference between freeze_noirq() and freeze() is analogous to the
+difference between suspend_noirq() and suspend().
- * Other kinds of devices in D3hot will discard device context as part of a
- soft reset when re-entering the D0 state.
-
- * Devices resuming from D3cold always go through a power-on reset. Some
- device context can also be preserved using Vaux power.
+3.1.6. poweroff()
- * Some systems hide D3cold resume paths from drivers. For example, on PCs
- the resume path for suspend-to-disk often runs BIOS powerup code, which
- will sometimes re-initialize the device.
+The poweroff() callback is hibernation-specific. It is executed when the system
+is about to be powered off after saving a hibernation image to a persistent
+storage. prepare() callbacks are executed for all devices before poweroff() is
+called.
-To handle resets during D3 to D0 transitions, it may be convenient to share
-device initialization code between probe() and resume(). Device parameters
-can also be saved before the driver suspends into D3, avoiding re-probe.
+The role of this callback is analogous to the role of the suspend() and freeze()
+callbacks described above, although it does not need to save the contents of
+the device's registers. In particular, if the driver wants to put the device
+into a low-power state itself instead of allowing the PCI subsystem to do that,
+the poweroff() callback should use pci_prepare_to_sleep() and
+pci_set_power_state() to prepare the device for system wakeup and to put it
+into a low-power state, respectively, but it need not save the device's standard
+configuration registers.
-If the device supports the PCI PM Spec, it can use this to physically transition
-the device to D0:
+3.1.7. poweroff_noirq()
-pci_set_power_state(dev,0);
+The poweroff_noirq() callback is hibernation-specific. It is executed after
+poweroff() callbacks have been executed for all devices in the system.
-Note that if the entire system is transitioning out of a global sleep state, all
-devices will be placed in the D0 state, so this is not necessary. However, in
-the event that the device is placed in the D3 state during normal operation,
-this call is necessary. It is impossible to determine which of the two events is
-taking place in the driver, so it is always a good idea to make that call.
+The role of this callback is analogous to the role of the suspend_noirq() and
+freeze_noirq() callbacks described above, but it does not need to save the
+contents of the device's registers.
-The driver should take note of the state that it is resuming from in order to
-ensure correct (and speedy) operation.
+The difference between poweroff_noirq() and poweroff() is analogous to the
+difference between suspend_noirq() and suspend().
-The driver should update the current_state field in its pci_dev structure in
-this function, except for PM-capable devices when pci_set_power_state is used.
+3.1.8. resume_noirq()
+The resume_noirq() callback is only executed during system resume, after the
+PM core has enabled the non-boot CPUs. The driver's interrupt handler will not
+be invoked while resume_noirq() is running, so this callback can carry out
+operations that might race with the interrupt handler.
+Since the PCI subsystem unconditionally puts all devices into the full power
+state in the resume_noirq phase of system resume and restores their standard
+configuration registers, resume_noirq() is usually not necessary. In general
+it should only be used for performing operations that would lead to race
+conditions if carried out by resume().
-A reference implementation
--------------------------
-.suspend()
-{
- /* driver specific operations */
+3.1.9. resume()
- /* Disable IRQ */
- free_irq();
- /* If using MSI */
- pci_disable_msi();
+The resume() callback is only executed during system resume, after
+resume_noirq() callbacks have been executed for all devices in the system and
+device interrupts have been enabled by the PM core.
- pci_save_state();
- pci_enable_wake();
- /* Disable IO/bus master/irq router */
- pci_disable_device();
- pci_set_power_state(pci_choose_state());
-}
+This callback is responsible for restoring the pre-suspend configuration of the
+device and bringing it back to the fully functional state. The device should be
+able to process I/O in a usual way after resume() has returned.
-.resume()
-{
- pci_set_power_state(PCI_D0);
- pci_restore_state();
- /* device's irq possibly is changed, driver should take care */
- pci_enable_device();
- pci_set_master();
+3.1.10. thaw_noirq()
- /* if using MSI, device's vector possibly is changed */
- pci_enable_msi();
+The thaw_noirq() callback is hibernation-specific. It is executed after a
+system image has been created and the non-boot CPUs have been enabled by the PM
+core, in the thaw_noirq phase of hibernation. It also may be executed if the
+loading of a hibernation image fails during system restore (it is then executed
+after enabling the non-boot CPUs). The driver's interrupt handler will not be
+invoked while thaw_noirq() is running.
- request_irq();
- /* driver specific operations; */
-}
+The role of this callback is analogous to the role of resume_noirq(). The
+difference between these two callbacks is that thaw_noirq() is executed after
+freeze() and freeze_noirq(), so in general it does not need to modify the
+contents of the device's registers.
-This is a typical implementation. Drivers can slightly change the order
-of the operations in the implementation, ignore some operations or add
-more driver specific operations in it, but drivers should do something like
-this on the whole.
+3.1.11. thaw()
-5. Resources
-~~~~~~~~~~~~
+The thaw() callback is hibernation-specific. It is executed after thaw_noirq()
+callbacks have been executed for all devices in the system and after device
+interrupts have been enabled by the PM core.
-PCI Local Bus Specification
-PCI Bus Power Management Interface Specification
+This callback is responsible for restoring the pre-freeze configuration of
+the device, so that it will work in a usual way after thaw() has returned.
- http://www.pcisig.com
+3.1.12. restore_noirq()
+The restore_noirq() callback is hibernation-specific. It is executed in the
+restore_noirq phase of hibernation, when the boot kernel has passed control to
+the image kernel and the non-boot CPUs have been enabled by the image kernel's
+PM core.
+
+This callback is analogous to resume_noirq() with the exception that it cannot
+make any assumption on the previous state of the device, even if the BIOS (or
+generally the platform firmware) is known to preserve that state over a
+suspend-resume cycle.
+
+For the vast majority of PCI device drivers there is no difference between
+resume_noirq() and restore_noirq().
+
+3.1.13. restore()
+
+The restore() callback is hibernation-specific. It is executed after
+restore_noirq() callbacks have been executed for all devices in the system and
+after the PM core has enabled device drivers' interrupt handlers to be invoked.
+
+This callback is analogous to resume(), just like restore_noirq() is analogous
+to resume_noirq(). Consequently, the difference between restore_noirq() and
+restore() is analogous to the difference between resume_noirq() and resume().
+
+For the vast majority of PCI device drivers there is no difference between
+resume() and restore().
+
+3.1.14. complete()
+
+The complete() callback is executed in the following situations:
+ - during system resume, after resume() callbacks have been executed for all
+ devices,
+ - during hibernation, before saving the system image, after thaw() callbacks
+ have been executed for all devices,
+ - during system restore, when the system is going back to its pre-hibernation
+ state, after restore() callbacks have been executed for all devices.
+It also may be executed if the loading of a hibernation image into memory fails
+(in that case it is run after thaw() callbacks have been executed for all
+devices that have drivers in the boot kernel).
+
+This callback is entirely optional, although it may be necessary if the
+prepare() callback performs operations that need to be reversed.
+
+3.1.15. runtime_suspend()
+
+The runtime_suspend() callback is specific to device runtime power management
+(runtime PM). It is executed by the PM core's runtime PM framework when the
+device is about to be suspended (i.e. quiesced and put into a low-power state)
+at run time.
+
+This callback is responsible for freezing the device and preparing it to be
+put into a low-power state, but it must allow the PCI subsystem to perform all
+of the PCI-specific actions necessary for suspending the device.
+
+3.1.16. runtime_resume()
+
+The runtime_resume() callback is specific to device runtime PM. It is executed
+by the PM core's runtime PM framework when the device is about to be resumed
+(i.e. put into the full-power state and programmed to process I/O normally) at
+run time.
+
+This callback is responsible for restoring the normal functionality of the
+device after it has been put into the full-power state by the PCI subsystem.
+The device is expected to be able to process I/O in the usual way after
+runtime_resume() has returned.
+
+3.1.17. runtime_idle()
+
+The runtime_idle() callback is specific to device runtime PM. It is executed
+by the PM core's runtime PM framework whenever it may be desirable to suspend
+the device according to the PM core's information. In particular, it is
+automatically executed right after runtime_resume() has returned in case the
+resume of the device has happened as a result of a spurious event.
+
+This callback is optional, but if it is not implemented or if it returns 0, the
+PCI subsystem will call pm_runtime_suspend() for the device, which in turn will
+cause the driver's runtime_suspend() callback to be executed.
+
+3.1.18. Pointing Multiple Callback Pointers to One Routine
+
+Although in principle each of the callbacks described in the previous
+subsections can be defined as a separate function, it often is convenient to
+point two or more members of struct dev_pm_ops to the same routine. There are
+a few convenience macros that can be used for this purpose.
+
+The SIMPLE_DEV_PM_OPS macro declares a struct dev_pm_ops object with one
+suspend routine pointed to by the .suspend(), .freeze(), and .poweroff()
+members and one resume routine pointed to by the .resume(), .thaw(), and
+.restore() members. The other function pointers in this struct dev_pm_ops are
+unset.
+
+The UNIVERSAL_DEV_PM_OPS macro is similar to SIMPLE_DEV_PM_OPS, but it
+additionally sets the .runtime_resume() pointer to the same value as
+.resume() (and .thaw(), and .restore()) and the .runtime_suspend() pointer to
+the same value as .suspend() (and .freeze() and .poweroff()).
+
+The SET_SYSTEM_SLEEP_PM_OPS can be used inside of a declaration of struct
+dev_pm_ops to indicate that one suspend routine is to be pointed to by the
+.suspend(), .freeze(), and .poweroff() members and one resume routine is to
+be pointed to by the .resume(), .thaw(), and .restore() members.
+
+3.2. Device Runtime Power Management
+------------------------------------
+In addition to providing device power management callbacks PCI device drivers
+are responsible for controlling the runtime power management (runtime PM) of
+their devices.
+
+The PCI device runtime PM is optional, but it is recommended that PCI device
+drivers implement it at least in the cases where there is a reliable way of
+verifying that the device is not used (like when the network cable is detached
+from an Ethernet adapter or there are no devices attached to a USB controller).
+
+To support the PCI runtime PM the driver first needs to implement the
+runtime_suspend() and runtime_resume() callbacks. It also may need to implement
+the runtime_idle() callback to prevent the device from being suspended again
+every time right after the runtime_resume() callback has returned
+(alternatively, the runtime_suspend() callback will have to check if the
+device should really be suspended and return -EAGAIN if that is not the case).
+
+The runtime PM of PCI devices is disabled by default. It is also blocked by
+pci_pm_init() that runs the pm_runtime_forbid() helper function. If a PCI
+driver implements the runtime PM callbacks and intends to use the runtime PM
+framework provided by the PM core and the PCI subsystem, it should enable this
+feature by executing the pm_runtime_enable() helper function. However, the
+driver should not call the pm_runtime_allow() helper function unblocking
+the runtime PM of the device. Instead, it should allow user space or some
+platform-specific code to do that (user space can do it via sysfs), although
+once it has called pm_runtime_enable(), it must be prepared to handle the
+runtime PM of the device correctly as soon as pm_runtime_allow() is called
+(which may happen at any time). [It also is possible that user space causes
+pm_runtime_allow() to be called via sysfs before the driver is loaded, so in
+fact the driver has to be prepared to handle the runtime PM of the device as
+soon as it calls pm_runtime_enable().]
+
+The runtime PM framework works by processing requests to suspend or resume
+devices, or to check if they are idle (in which cases it is reasonable to
+subsequently request that they be suspended). These requests are represented
+by work items put into the power management workqueue, pm_wq. Although there
+are a few situations in which power management requests are automatically
+queued by the PM core (for example, after processing a request to resume a
+device the PM core automatically queues a request to check if the device is
+idle), device drivers are generally responsible for queuing power management
+requests for their devices. For this purpose they should use the runtime PM
+helper functions provided by the PM core, discussed in
+Documentation/power/runtime_pm.txt.
+
+Devices can also be suspended and resumed synchronously, without placing a
+request into pm_wq. In the majority of cases this also is done by their
+drivers that use helper functions provided by the PM core for this purpose.
+
+For more information on the runtime PM of devices refer to
+Documentation/power/runtime_pm.txt.
+
+
+4. Resources
+============
+
+PCI Local Bus Specification, Rev. 3.0
+PCI Bus Power Management Interface Specification, Rev. 1.2
+Advanced Configuration and Power Interface (ACPI) Specification, Rev. 3.0b
+PCI Express Base Specification, Rev. 2.0
+Documentation/power/devices.txt
+Documentation/power/runtime_pm.txt
diff --git a/Documentation/power/pm_qos_interface.txt b/Documentation/power/pm_qos_interface.txt
index c40866e8b95..bfed898a03f 100644
--- a/Documentation/power/pm_qos_interface.txt
+++ b/Documentation/power/pm_qos_interface.txt
@@ -18,44 +18,46 @@ and pm_qos_params.h. This is done because having the available parameters
being runtime configurable or changeable from a driver was seen as too easy to
abuse.
-For each parameter a list of performance requirements is maintained along with
+For each parameter a list of performance requests is maintained along with
an aggregated target value. The aggregated target value is updated with
-changes to the requirement list or elements of the list. Typically the
-aggregated target value is simply the max or min of the requirement values held
+changes to the request list or elements of the list. Typically the
+aggregated target value is simply the max or min of the request values held
in the parameter list elements.
From kernel mode the use of this interface is simple:
-pm_qos_add_requirement(param_id, name, target_value):
-Will insert a named element in the list for that identified PM_QOS parameter
-with the target value. Upon change to this list the new target is recomputed
-and any registered notifiers are called only if the target value is now
-different.
-pm_qos_update_requirement(param_id, name, new_target_value):
-Will search the list identified by the param_id for the named list element and
-then update its target value, calling the notification tree if the aggregated
-target is changed. with that name is already registered.
+handle = pm_qos_add_request(param_class, target_value):
+Will insert an element into the list for that identified PM_QOS class with the
+target value. Upon change to this list the new target is recomputed and any
+registered notifiers are called only if the target value is now different.
+Clients of pm_qos need to save the returned handle.
-pm_qos_remove_requirement(param_id, name):
-Will search the identified list for the named element and remove it, after
-removal it will update the aggregate target and call the notification tree if
-the target was changed as a result of removing the named requirement.
+void pm_qos_update_request(handle, new_target_value):
+Will update the list element pointed to by the handle with the new target value
+and recompute the new aggregated target, calling the notification tree if the
+target is changed.
+
+void pm_qos_remove_request(handle):
+Will remove the element. After removal it will update the aggregate target and
+call the notification tree if the target was changed as a result of removing
+the request.
From user mode:
-Only processes can register a pm_qos requirement. To provide for automatic
-cleanup for process the interface requires the process to register its
-parameter requirements in the following way:
+Only processes can register a pm_qos request. To provide for automatic
+cleanup of a process, the interface requires the process to register its
+parameter requests in the following way:
To register the default pm_qos target for the specific parameter, the process
must open one of /dev/[cpu_dma_latency, network_latency, network_throughput]
As long as the device node is held open that process has a registered
-requirement on the parameter. The name of the requirement is "process_<PID>"
-derived from the current->pid from within the open system call.
+request on the parameter.
-To change the requested target value the process needs to write a s32 value to
-the open device node. This translates to a pm_qos_update_requirement call.
+To change the requested target value the process needs to write an s32 value to
+the open device node. Alternatively the user mode program could write a hex
+string for the value using 10 char long format e.g. "0x12345678". This
+translates to a pm_qos_update_request call.
To remove the user mode request for a target value simply close the device
node.
diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt
index cdebb5145c2..55c4175d809 100644
--- a/Documentation/power/regulator/consumer.txt
+++ b/Documentation/power/regulator/consumer.txt
@@ -8,11 +8,11 @@ Please see overview.txt for a description of the terms used in this text.
1. Consumer Regulator Access (static & dynamic drivers)
=======================================================
-A consumer driver can get access to it's supply regulator by calling :-
+A consumer driver can get access to its supply regulator by calling :-
regulator = regulator_get(dev, "Vcc");
-The consumer passes in it's struct device pointer and power supply ID. The core
+The consumer passes in its struct device pointer and power supply ID. The core
then finds the correct regulator by consulting a machine specific lookup table.
If the lookup is successful then this call will return a pointer to the struct
regulator that supplies this consumer.
@@ -34,7 +34,7 @@ usually be called in your device drivers probe() and remove() respectively.
2. Regulator Output Enable & Disable (static & dynamic drivers)
====================================================================
-A consumer can enable it's power supply by calling:-
+A consumer can enable its power supply by calling:-
int regulator_enable(regulator);
@@ -49,7 +49,7 @@ int regulator_is_enabled(regulator);
This will return > zero when the regulator is enabled.
-A consumer can disable it's supply when no longer needed by calling :-
+A consumer can disable its supply when no longer needed by calling :-
int regulator_disable(regulator);
@@ -140,7 +140,7 @@ by calling :-
int regulator_set_optimum_mode(struct regulator *regulator, int load_uA);
This will cause the core to recalculate the total load on the regulator (based
-on all it's consumers) and change operating mode (if necessary and permitted)
+on all its consumers) and change operating mode (if necessary and permitted)
to best match the current operating load.
The load_uA value can be determined from the consumers datasheet. e.g.most
diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.txt
index 63728fed620..bdec39b9bd7 100644
--- a/Documentation/power/regulator/machine.txt
+++ b/Documentation/power/regulator/machine.txt
@@ -52,7 +52,7 @@ static struct regulator_init_data regulator1_data = {
};
Regulator-1 supplies power to Regulator-2. This relationship must be registered
-with the core so that Regulator-1 is also enabled when Consumer A enables it's
+with the core so that Regulator-1 is also enabled when Consumer A enables its
supply (Regulator-2). The supply regulator is set by the supply_regulator_dev
field below:-
diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt
index ffd185bb605..8ed17587a74 100644
--- a/Documentation/power/regulator/overview.txt
+++ b/Documentation/power/regulator/overview.txt
@@ -13,7 +13,7 @@ regulators (where voltage output is controllable) and current sinks (where
current limit is controllable).
(C) 2008 Wolfson Microelectronics PLC.
-Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Author: Liam Girdwood <lrg@slimlogic.co.uk>
Nomenclature
@@ -35,16 +35,16 @@ Some terms used in this document:-
o Consumer - Electronic device that is supplied power by a regulator.
Consumers can be classified into two types:-
- Static: consumer does not change it's supply voltage or
+ Static: consumer does not change its supply voltage or
current limit. It only needs to enable or disable it's
- power supply. It's supply voltage is set by the hardware,
+ power supply. Its supply voltage is set by the hardware,
bootloader, firmware or kernel board initialisation code.
Dynamic: consumer needs to change it's supply voltage or
current limit to meet operation demands.
- o Power Domain - Electronic circuit that is supplied it's input power by the
+ o Power Domain - Electronic circuit that is supplied its input power by the
output power of a regulator, switch or by another power
domain.
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
index 356fd86f4ea..55b859b3bc7 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -224,6 +224,12 @@ defined in include/linux/pm.h:
RPM_SUSPENDED, which means that each device is initially regarded by the
PM core as 'suspended', regardless of its real hardware status
+ unsigned int runtime_auto;
+ - if set, indicates that the user space has allowed the device driver to
+ power manage the device at run time via the /sys/devices/.../power/control
+ interface; it may only be modified with the help of the pm_runtime_allow()
+ and pm_runtime_forbid() helper functions
+
All of the above fields are members of the 'power' member of 'struct device'.
4. Run-time PM Device Helper Functions
@@ -250,7 +256,7 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
to suspend the device again in future
int pm_runtime_resume(struct device *dev);
- - execute the subsystem-leve resume callback for the device; returns 0 on
+ - execute the subsystem-level resume callback for the device; returns 0 on
success, 1 if the device's run-time PM status was already 'active' or
error code on failure, where -EAGAIN means it may be safe to attempt to
resume the device again in future, but 'power.runtime_error' should be
@@ -329,6 +335,20 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
'power.runtime_error' is set or 'power.disable_depth' is greater than
zero)
+ bool pm_runtime_suspended(struct device *dev);
+ - return true if the device's runtime PM status is 'suspended', or false
+ otherwise
+
+ void pm_runtime_allow(struct device *dev);
+ - set the power.runtime_auto flag for the device and decrease its usage
+ counter (used by the /sys/devices/.../power/control interface to
+ effectively allow the device to be power managed at run time)
+
+ void pm_runtime_forbid(struct device *dev);
+ - unset the power.runtime_auto flag for the device and increase its usage
+ counter (used by the /sys/devices/.../power/control interface to
+ effectively prevent the device from being power managed at run time)
+
It is safe to execute the following helper functions from interrupt context:
pm_request_idle()
@@ -382,6 +402,18 @@ may be desirable to suspend the device as soon as ->probe() or ->remove() has
finished, so the PM core uses pm_runtime_idle_sync() to invoke the
subsystem-level idle callback for the device at that time.
+The user space can effectively disallow the driver of the device to power manage
+it at run time by changing the value of its /sys/devices/.../power/control
+attribute to "on", which causes pm_runtime_forbid() to be called. In principle,
+this mechanism may also be used by the driver to effectively turn off the
+run-time power management of the device until the user space turns it on.
+Namely, during the initialization the driver can make sure that the run-time PM
+status of the device is 'active' and call pm_runtime_forbid(). It should be
+noted, however, that if the user space has already intentionally changed the
+value of /sys/devices/.../power/control to "auto" to allow the driver to power
+manage the device at run time, the driver may confuse it by using
+pm_runtime_forbid() this way.
+
6. Run-time PM and System Sleep
Run-time PM and system sleep (i.e., system suspend and hibernation, also known
@@ -431,3 +463,64 @@ The PM core always increments the run-time usage counter before calling the
->prepare() callback and decrements it after calling the ->complete() callback.
Hence disabling run-time PM temporarily like this will not cause any run-time
suspend callbacks to be lost.
+
+7. Generic subsystem callbacks
+
+Subsystems may wish to conserve code space by using the set of generic power
+management callbacks provided by the PM core, defined in
+driver/base/power/generic_ops.c:
+
+ int pm_generic_runtime_idle(struct device *dev);
+ - invoke the ->runtime_idle() callback provided by the driver of this
+ device, if defined, and call pm_runtime_suspend() for this device if the
+ return value is 0 or the callback is not defined
+
+ int pm_generic_runtime_suspend(struct device *dev);
+ - invoke the ->runtime_suspend() callback provided by the driver of this
+ device and return its result, or return -EINVAL if not defined
+
+ int pm_generic_runtime_resume(struct device *dev);
+ - invoke the ->runtime_resume() callback provided by the driver of this
+ device and return its result, or return -EINVAL if not defined
+
+ int pm_generic_suspend(struct device *dev);
+ - if the device has not been suspended at run time, invoke the ->suspend()
+ callback provided by its driver and return its result, or return 0 if not
+ defined
+
+ int pm_generic_resume(struct device *dev);
+ - invoke the ->resume() callback provided by the driver of this device and,
+ if successful, change the device's runtime PM status to 'active'
+
+ int pm_generic_freeze(struct device *dev);
+ - if the device has not been suspended at run time, invoke the ->freeze()
+ callback provided by its driver and return its result, or return 0 if not
+ defined
+
+ int pm_generic_thaw(struct device *dev);
+ - if the device has not been suspended at run time, invoke the ->thaw()
+ callback provided by its driver and return its result, or return 0 if not
+ defined
+
+ int pm_generic_poweroff(struct device *dev);
+ - if the device has not been suspended at run time, invoke the ->poweroff()
+ callback provided by its driver and return its result, or return 0 if not
+ defined
+
+ int pm_generic_restore(struct device *dev);
+ - invoke the ->restore() callback provided by the driver of this device and,
+ if successful, change the device's runtime PM status to 'active'
+
+These functions can be assigned to the ->runtime_idle(), ->runtime_suspend(),
+->runtime_resume(), ->suspend(), ->resume(), ->freeze(), ->thaw(), ->poweroff(),
+or ->restore() callback pointers in the subsystem-level dev_pm_ops structures.
+
+If a subsystem wishes to use all of them at the same time, it can simply assign
+the GENERIC_SUBSYS_PM_OPS macro, defined in include/linux/pm.h, to its
+dev_pm_ops structure pointer.
+
+Device drivers that wish to use the same function as a system suspend, freeze,
+poweroff and run-time suspend callback, and similarly for system resume, thaw,
+restore, and run-time resume, can achieve this with the help of the
+UNIVERSAL_DEV_PM_OPS macro defined in include/linux/pm.h (possibly setting its
+last argument to NULL).
diff --git a/Documentation/power/tricks.txt b/Documentation/power/tricks.txt
index 3b26bb502a4..a1b8f7249f4 100644
--- a/Documentation/power/tricks.txt
+++ b/Documentation/power/tricks.txt
@@ -1,6 +1,6 @@
swsusp/S3 tricks
~~~~~~~~~~~~~~~~
-Pavel Machek <pavel@suse.cz>
+Pavel Machek <pavel@ucw.cz>
If you want to trick swsusp/S3 into working, you might want to try:
diff --git a/Documentation/power/userland-swsusp.txt b/Documentation/power/userland-swsusp.txt
index b967cd9137d..81680f9f590 100644
--- a/Documentation/power/userland-swsusp.txt
+++ b/Documentation/power/userland-swsusp.txt
@@ -24,6 +24,10 @@ assumed to be in the resume mode. The device cannot be open for simultaneous
reading and writing. It is also impossible to have the device open more than
once at a time.
+Even opening the device has side effects. Data structures are
+allocated, and PM_HIBERNATION_PREPARE / PM_RESTORE_PREPARE chains are
+called.
+
The ioctl() commands recognized by the device are:
SNAPSHOT_FREEZE - freeze user space processes (the current process is
diff --git a/Documentation/power/video.txt b/Documentation/power/video.txt
index 2b358498d09..3e6272bc447 100644
--- a/Documentation/power/video.txt
+++ b/Documentation/power/video.txt
@@ -67,11 +67,11 @@ There are a few types of systems where video works after S3 resume:
POSTing bios works. Ole Rohne has patch to do just that at
http://dev.gentoo.org/~marineam/patch-radeonfb-2.6.11-rc2-mm2.
-(8) on some systems, you can use the video_post utility mentioned here:
- http://bugzilla.kernel.org/show_bug.cgi?id=3670. Do echo 3 > /sys/power/state
- && /usr/sbin/video_post - which will initialize the display in console mode.
- If you are in X, you can switch to a virtual terminal and back to X using
- CTRL+ALT+F1 - CTRL+ALT+F7 to get the display working in graphical mode again.
+(8) on some systems, you can use the video_post utility and or
+ do echo 3 > /sys/power/state && /usr/sbin/video_post - which will
+ initialize the display in console mode. If you are in X, you can switch
+ to a virtual terminal and back to X using CTRL+ALT+F1 - CTRL+ALT+F7 to get
+ the display working in graphical mode again.
Now, if you pass acpi_sleep=something, and it does not work with your
bios, you'll get a hard crash during resume. Be careful. Also it is
@@ -177,7 +177,7 @@ Mainboard Graphics card hack (or "how to do it")
Asus A7V8X nVidia RIVA TNT2 model 64 s3_bios,s3_mode (4)
-(*) from http://www.ubuntulinux.org/wiki/HoaryPMResults, not sure
+(*) from https://wiki.ubuntu.com/HoaryPMResults, not sure
which options to use. If you know, please tell me.
(***) To be tested with a newer kernel.
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 79f533f38c6..302db5da49b 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -49,40 +49,13 @@ Table of Contents
f) MDIO on GPIOs
g) SPI busses
- VII - Marvell Discovery mv64[345]6x System Controller chips
- 1) The /system-controller node
- 2) Child nodes of /system-controller
- a) Marvell Discovery MDIO bus
- b) Marvell Discovery ethernet controller
- c) Marvell Discovery PHY nodes
- d) Marvell Discovery SDMA nodes
- e) Marvell Discovery BRG nodes
- f) Marvell Discovery CUNIT nodes
- g) Marvell Discovery MPSCROUTING nodes
- h) Marvell Discovery MPSCINTR nodes
- i) Marvell Discovery MPSC nodes
- j) Marvell Discovery Watch Dog Timer nodes
- k) Marvell Discovery I2C nodes
- l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
- m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
- n) Marvell Discovery GPP (General Purpose Pins) nodes
- o) Marvell Discovery PCI host bridge node
- p) Marvell Discovery CPU Error nodes
- q) Marvell Discovery SRAM Controller nodes
- r) Marvell Discovery PCI Error Handler nodes
- s) Marvell Discovery Memory Controller nodes
-
- VIII - Specifying interrupt information for devices
+ VII - Specifying interrupt information for devices
1) interrupts property
2) interrupt-parent property
3) OpenPIC Interrupt Controllers
4) ISA Interrupt Controllers
- IX - Specifying GPIO information for devices
- 1) gpios property
- 2) gpio-controller nodes
-
- X - Specifying device power management information (sleep property)
+ VIII - Specifying device power management information (sleep property)
Appendix A - Sample SOC node for MPC8540
@@ -1048,7 +1021,7 @@ IV - "dtc", the device tree compiler
dtc source code can be found at
-<http://ozlabs.org/~dgibson/dtc/dtc.tar.gz>
+<http://git.jdl.com/gitweb/?p=dtc.git>
WARNING: This version is still in early development stage; the
resulting device-tree "blobs" have not yet been validated with the
@@ -1289,7 +1262,7 @@ link between a device node and its interrupt parent in
the interrupt tree. The value of interrupt-parent is the
phandle of the parent node.
-If the interrupt-parent property is not defined for a node, it's
+If the interrupt-parent property is not defined for a node, its
interrupt parent is assumed to be an ancestor in the node's
_device tree_ hierarchy.
diff --git a/Documentation/powerpc/dts-bindings/4xx/reboot.txt b/Documentation/powerpc/dts-bindings/4xx/reboot.txt
new file mode 100644
index 00000000000..d7217260589
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/4xx/reboot.txt
@@ -0,0 +1,18 @@
+Reboot property to control system reboot on PPC4xx systems:
+
+By setting "reset_type" to one of the following values, the default
+software reset mechanism may be overidden. Here the possible values of
+"reset_type":
+
+ 1 - PPC4xx core reset
+ 2 - PPC4xx chip reset
+ 3 - PPC4xx system reset (default)
+
+Example:
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,440SPe";
+ ...
+ reset-type = <2>; /* Use chip-reset */
+ };
diff --git a/Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt b/Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt
index d015dcec401..b0019eb5330 100644
--- a/Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/8xxx_gpio.txt
@@ -11,7 +11,7 @@ Required properties:
83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx.
- #gpio-cells : Should be two. The first cell is the pin number and the
second cell is used to specify optional parameters (currently unused).
- - interrupts : Interrupt mapping for GPIO IRQ (currently unused).
+ - interrupts : Interrupt mapping for GPIO IRQ.
- interrupt-parent : Phandle for the interrupt controller that
services interrupts for this device.
- gpio-controller : Marks the port as GPIO controller.
@@ -38,3 +38,23 @@ Example of gpio-controller nodes for a MPC8347 SoC:
See booting-without-of.txt for details of how to specify GPIO
information for devices.
+
+To use GPIO pins as interrupt sources for peripherals, specify the
+GPIO controller as the interrupt parent and define GPIO number +
+trigger mode using the interrupts property, which is defined like
+this:
+
+interrupts = <number trigger>, where:
+ - number: GPIO pin (0..31)
+ - trigger: trigger mode:
+ 2 = trigger on falling edge
+ 3 = trigger on both edges
+
+Example of device using this is:
+
+ funkyfpga@0 {
+ compatible = "funky-fpga";
+ ...
+ interrupts = <4 3>;
+ interrupt-parent = <&gpio1>;
+ };
diff --git a/Documentation/powerpc/dts-bindings/fsl/can.txt b/Documentation/powerpc/dts-bindings/fsl/can.txt
new file mode 100644
index 00000000000..2fa4fcd38fd
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/can.txt
@@ -0,0 +1,53 @@
+CAN Device Tree Bindings
+------------------------
+
+(c) 2006-2009 Secret Lab Technologies Ltd
+Grant Likely <grant.likely@secretlab.ca>
+
+fsl,mpc5200-mscan nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properties, you can
+also specify which clock source shall be used for the controller:
+
+- fsl,mscan-clock-source : a string describing the clock source. Valid values
+ are: "ip" for ip bus clock
+ "ref" for reference clock (XTAL)
+ "ref" is default in case this property is not
+ present.
+
+fsl,mpc5121-mscan nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properties, you can
+also specify which clock source and divider shall be used for the controller:
+
+- fsl,mscan-clock-source : a string describing the clock source. Valid values
+ are: "ip" for ip bus clock
+ "ref" for reference clock
+ "sys" for system clock
+ If this property is not present, an optimal CAN
+ clock source and frequency based on the system
+ clock will be selected. If this is not possible,
+ the reference clock will be used.
+
+- fsl,mscan-clock-divider: for the reference and system clock, an additional
+ clock divider can be specified. By default, a
+ value of 1 is used.
+
+Note that the MPC5121 Rev. 1 processor is not supported.
+
+Examples:
+ can@1300 {
+ compatible = "fsl,mpc5121-mscan";
+ interrupts = <12 0x8>;
+ interrupt-parent = <&ipic>;
+ reg = <0x1300 0x80>;
+ };
+
+ can@1380 {
+ compatible = "fsl,mpc5121-mscan";
+ interrupts = <13 0x8>;
+ interrupt-parent = <&ipic>;
+ reg = <0x1380 0x80>;
+ fsl,mscan-clock-source = "ref";
+ fsl,mscan-clock-divider = <3>;
+ };
diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
index 6e37be1eeb2..4f8930263dd 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
@@ -21,6 +21,15 @@ Required properties:
- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the
threads.
+Optional properties:
+- fsl,firmware-phandle:
+ Usage: required only if there is no fsl,qe-firmware child node
+ Value type: <phandle>
+ Definition: Points to a firmware node (see "QE Firmware Node" below)
+ that contains the firmware that should be uploaded for this QE.
+ The compatible property for the firmware node should say,
+ "fsl,qe-firmware".
+
Recommended properties
- brg-frequency : the internal clock source frequency for baud-rate
generators in Hz.
@@ -59,3 +68,48 @@ Example:
reg = <0 c000>;
};
};
+
+* QE Firmware Node
+
+This node defines a firmware binary that is embedded in the device tree, for
+the purpose of passing the firmware from bootloader to the kernel, or from
+the hypervisor to the guest.
+
+The firmware node itself contains the firmware binary contents, a compatible
+property, and any firmware-specific properties. The node should be placed
+inside a QE node that needs it. Doing so eliminates the need for a
+fsl,firmware-phandle property. Other QE nodes that need the same firmware
+should define an fsl,firmware-phandle property that points to the firmware node
+in the first QE node.
+
+The fsl,firmware property can be specified in the DTS (possibly using incbin)
+or can be inserted by the boot loader at boot time.
+
+Required properties:
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: A standard property. Specify a string that indicates what
+ kind of firmware it is. For QE, this should be "fsl,qe-firmware".
+
+ - fsl,firmware
+ Usage: required
+ Value type: <prop-encoded-array>, encoded as an array of bytes
+ Definition: A standard property. This property contains the firmware
+ binary "blob".
+
+Example:
+ qe1@e0080000 {
+ compatible = "fsl,qe";
+ qe_firmware:qe-firmware {
+ compatible = "fsl,qe-firmware";
+ fsl,firmware = [0x70 0xcd 0x00 0x00 0x01 0x46 0x45 ...];
+ };
+ ...
+ };
+
+ qe2@e0090000 {
+ compatible = "fsl,qe";
+ fsl,firmware-phandle = <&qe_firmware>;
+ ...
+ };
diff --git a/Documentation/powerpc/dts-bindings/fsl/diu.txt b/Documentation/powerpc/dts-bindings/fsl/diu.txt
index deb35de7098..b66cb6d31d6 100644
--- a/Documentation/powerpc/dts-bindings/fsl/diu.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/diu.txt
@@ -4,10 +4,17 @@ The Freescale DIU is a LCD controller, with proper hardware, it can also
drive DVI monitors.
Required properties:
-- compatible : should be "fsl-diu".
+- compatible : should be "fsl,diu" or "fsl,mpc5121-diu".
- reg : should contain at least address and length of the DIU register
set.
-- Interrupts : one DIU interrupt should be describe here.
+- interrupts : one DIU interrupt should be described here.
+- interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+
+Optional properties:
+- edid : verbatim EDID data block describing attached display.
+ Data from the detailed timing descriptor will be used to
+ program the display controller.
Example (MPC8610HPCD):
display@2c000 {
@@ -16,3 +23,12 @@ Example (MPC8610HPCD):
interrupts = <72 2>;
interrupt-parent = <&mpic>;
};
+
+Example for MPC5121:
+ display@2100 {
+ compatible = "fsl,mpc5121-diu";
+ reg = <0x2100 0x100>;
+ interrupts = <64 0x8>;
+ interrupt-parent = <&ipic>;
+ edid = [edid-data];
+ };
diff --git a/Documentation/powerpc/dts-bindings/fsl/dma.txt b/Documentation/powerpc/dts-bindings/fsl/dma.txt
index 0732cdd05ba..2a4b4bce611 100644
--- a/Documentation/powerpc/dts-bindings/fsl/dma.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/dma.txt
@@ -44,21 +44,29 @@ Example:
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
cell-index = <0>;
reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
cell-index = <1>;
reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
cell-index = <2>;
reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
cell-index = <3>;
reg = <0x180 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <71 8>;
};
};
diff --git a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
index 8a004073896..64bcb8be973 100644
--- a/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/esdhc.txt
@@ -14,6 +14,8 @@ Required properties:
reports inverted write-protect state;
- sdhci,1-bit-only : (optional) specifies that a controller can
only handle 1-bit data transfers.
+ - sdhci,auto-cmd12: (optional) specifies that a controller can
+ only handle auto CMD12.
Example:
diff --git a/Documentation/powerpc/dts-bindings/fsl/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/i2c.txt
index b6d2e21474f..1eacd6b20ed 100644
--- a/Documentation/powerpc/dts-bindings/fsl/i2c.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/i2c.txt
@@ -2,15 +2,14 @@
Required properties :
- - device_type : Should be "i2c"
- reg : Offset and length of the register set for the device
+ - compatible : should be "fsl,CHIP-i2c" where CHIP is the name of a
+ compatible processor, e.g. mpc8313, mpc8543, mpc8544, mpc5121,
+ mpc5200 or mpc5200b. For the mpc5121, an additional node
+ "fsl,mpc5121-i2c-ctrl" is required as shown in the example below.
Recommended properties :
- - compatible : compatibility list with 2 entries, the first should
- be "fsl,CHIP-i2c" where CHIP is the name of a compatible processor,
- e.g. mpc8313, mpc8543, mpc8544, mpc5200 or mpc5200b. The second one
- should be "fsl-i2c".
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
information for the interrupt. This should be encoded based on
@@ -21,28 +20,45 @@ Recommended properties :
- fsl,preserve-clocking : boolean; if defined, the clock settings
from the bootloader are preserved (not touched).
- clock-frequency : desired I2C bus clock frequency in Hz.
+ - fsl,timeout : I2C bus timeout in microseconds.
Examples :
+ /* MPC5121 based board */
+ i2c@1740 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+ reg = <0x1740 0x20>;
+ interrupts = <11 0x8>;
+ interrupt-parent = <&ipic>;
+ clock-frequency = <100000>;
+ };
+
+ i2ccontrol@1760 {
+ compatible = "fsl,mpc5121-i2c-ctrl";
+ reg = <0x1760 0x8>;
+ };
+
+ /* MPC5200B based board */
i2c@3d00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
- cell-index = <0>;
reg = <0x3d00 0x40>;
interrupts = <2 15 0>;
interrupt-parent = <&mpc5200_pic>;
fsl,preserve-clocking;
};
+ /* MPC8544 base board */
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
- cell-index = <1>;
compatible = "fsl,mpc8544-i2c", "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
clock-frequency = <400000>;
+ fsl,timeout = <10000>;
};
-
diff --git a/Documentation/powerpc/dts-bindings/fsl/mpc5121-psc.txt b/Documentation/powerpc/dts-bindings/fsl/mpc5121-psc.txt
new file mode 100644
index 00000000000..8832e879891
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/mpc5121-psc.txt
@@ -0,0 +1,70 @@
+MPC5121 PSC Device Tree Bindings
+
+PSC in UART mode
+----------------
+
+For PSC in UART mode the needed PSC serial devices
+are specified by fsl,mpc5121-psc-uart nodes in the
+fsl,mpc5121-immr SoC node. Additionally the PSC FIFO
+Controller node fsl,mpc5121-psc-fifo is requered there:
+
+fsl,mpc5121-psc-uart nodes
+--------------------------
+
+Required properties :
+ - compatible : Should contain "fsl,mpc5121-psc-uart" and "fsl,mpc5121-psc"
+ - cell-index : Index of the PSC in hardware
+ - reg : Offset and length of the register set for the PSC device
+ - interrupts : <a b> where a is the interrupt number of the
+ PSC FIFO Controller and b is a field that represents an
+ encoding of the sense and level information for the interrupt.
+ - interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+
+Recommended properties :
+ - fsl,rx-fifo-size : the size of the RX fifo slice (a multiple of 4)
+ - fsl,tx-fifo-size : the size of the TX fifo slice (a multiple of 4)
+
+
+fsl,mpc5121-psc-fifo node
+-------------------------
+
+Required properties :
+ - compatible : Should be "fsl,mpc5121-psc-fifo"
+ - reg : Offset and length of the register set for the PSC
+ FIFO Controller
+ - interrupts : <a b> where a is the interrupt number of the
+ PSC FIFO Controller and b is a field that represents an
+ encoding of the sense and level information for the interrupt.
+ - interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+
+
+Example for a board using PSC0 and PSC1 devices in serial mode:
+
+serial@11000 {
+ compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+ cell-index = <0>;
+ reg = <0x11000 0x100>;
+ interrupts = <40 0x8>;
+ interrupt-parent = < &ipic >;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+};
+
+serial@11100 {
+ compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
+ cell-index = <1>;
+ reg = <0x11100 0x100>;
+ interrupts = <40 0x8>;
+ interrupt-parent = < &ipic >;
+ fsl,rx-fifo-size = <16>;
+ fsl,tx-fifo-size = <16>;
+};
+
+pscfifo@11f00 {
+ compatible = "fsl,mpc5121-psc-fifo";
+ reg = <0x11f00 0x100>;
+ interrupts = <40 0x8>;
+ interrupt-parent = < &ipic >;
+};
diff --git a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
index 5c6602dbfdc..4ccb2cd5df9 100644
--- a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
@@ -195,11 +195,4 @@ External interrupts:
fsl,mpc5200-mscan nodes
-----------------------
-In addition to the required compatible-, reg- and interrupt-properites, you can
-also specify which clock source shall be used for the controller:
-
-- fsl,mscan-clock-source- a string describing the clock source. Valid values
- are: "ip" for ip bus clock
- "ref" for reference clock (XTAL)
- "ref" is default in case this property is not
- present.
+See file can.txt in this directory.
diff --git a/Documentation/powerpc/dts-bindings/fsl/spi.txt b/Documentation/powerpc/dts-bindings/fsl/spi.txt
index e7d9a344c4f..80510c018ee 100644
--- a/Documentation/powerpc/dts-bindings/fsl/spi.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/spi.txt
@@ -13,6 +13,11 @@ Required properties:
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
+Optional properties:
+- gpios : specifies the gpio pins to be used for chipselects.
+ The gpios will be referred to as reg = <index> in the SPI child nodes.
+ If unspecified, a single SPI device without a chip select can be used.
+
Example:
spi@4c0 {
cell-index = <0>;
@@ -21,4 +26,6 @@ Example:
interrupts = <82 0>;
interrupt-parent = <700>;
mode = "cpu";
+ gpios = <&gpio 18 1 // device reg=<0>
+ &gpio 19 1>; // device reg=<1>
};
diff --git a/Documentation/powerpc/dts-bindings/xilinx.txt b/Documentation/powerpc/dts-bindings/xilinx.txt
index ea68046bb9c..299d0923537 100644
--- a/Documentation/powerpc/dts-bindings/xilinx.txt
+++ b/Documentation/powerpc/dts-bindings/xilinx.txt
@@ -11,7 +11,7 @@
control how the core is synthesized. Historically, the EDK tool would
extract the device parameters relevant to device drivers and copy them
into an 'xparameters.h' in the form of #define symbols. This tells the
- device drivers how the IP cores are configured, but it requres the kernel
+ device drivers how the IP cores are configured, but it requires the kernel
to be recompiled every time the FPGA bitstream is resynthesized.
The new approach is to export the parameters into the device tree and
diff --git a/Documentation/powerpc/hvcs.txt b/Documentation/powerpc/hvcs.txt
index f93462c5db2..6d8be3468d7 100644
--- a/Documentation/powerpc/hvcs.txt
+++ b/Documentation/powerpc/hvcs.txt
@@ -560,7 +560,7 @@ The proper channel for reporting bugs is either through the Linux OS
distribution company that provided your OS or by posting issues to the
PowerPC development mailing list at:
-linuxppc-dev@ozlabs.org
+linuxppc-dev@lists.ozlabs.org
This request is to provide a documented and searchable public exchange
of the problems and solutions surrounding this driver for the benefit of
diff --git a/Documentation/powerpc/phyp-assisted-dump.txt b/Documentation/powerpc/phyp-assisted-dump.txt
index c4682b982a2..ad340205d96 100644
--- a/Documentation/powerpc/phyp-assisted-dump.txt
+++ b/Documentation/powerpc/phyp-assisted-dump.txt
@@ -19,7 +19,7 @@ dump offers several strong, practical advantages:
immediately available to the system for normal use.
-- After the dump is completed, no further reboots are
required; the system will be fully usable, and running
- in it's normal, production mode on it normal kernel.
+ in its normal, production mode on its normal kernel.
The above can only be accomplished by coordination with,
and assistance from the hypervisor. The procedure is
diff --git a/Documentation/powerpc/ptrace.txt b/Documentation/powerpc/ptrace.txt
new file mode 100644
index 00000000000..f4a5499b7bc
--- /dev/null
+++ b/Documentation/powerpc/ptrace.txt
@@ -0,0 +1,134 @@
+GDB intends to support the following hardware debug features of BookE
+processors:
+
+4 hardware breakpoints (IAC)
+2 hardware watchpoints (read, write and read-write) (DAC)
+2 value conditions for the hardware watchpoints (DVC)
+
+For that, we need to extend ptrace so that GDB can query and set these
+resources. Since we're extending, we're trying to create an interface
+that's extendable and that covers both BookE and server processors, so
+that GDB doesn't need to special-case each of them. We added the
+following 3 new ptrace requests.
+
+1. PTRACE_PPC_GETHWDEBUGINFO
+
+Query for GDB to discover the hardware debug features. The main info to
+be returned here is the minimum alignment for the hardware watchpoints.
+BookE processors don't have restrictions here, but server processors have
+an 8-byte alignment restriction for hardware watchpoints. We'd like to avoid
+adding special cases to GDB based on what it sees in AUXV.
+
+Since we're at it, we added other useful info that the kernel can return to
+GDB: this query will return the number of hardware breakpoints, hardware
+watchpoints and whether it supports a range of addresses and a condition.
+The query will fill the following structure provided by the requesting process:
+
+struct ppc_debug_info {
+ unit32_t version;
+ unit32_t num_instruction_bps;
+ unit32_t num_data_bps;
+ unit32_t num_condition_regs;
+ unit32_t data_bp_alignment;
+ unit32_t sizeof_condition; /* size of the DVC register */
+ uint64_t features; /* bitmask of the individual flags */
+};
+
+features will have bits indicating whether there is support for:
+
+#define PPC_DEBUG_FEATURE_INSN_BP_RANGE 0x1
+#define PPC_DEBUG_FEATURE_INSN_BP_MASK 0x2
+#define PPC_DEBUG_FEATURE_DATA_BP_RANGE 0x4
+#define PPC_DEBUG_FEATURE_DATA_BP_MASK 0x8
+
+2. PTRACE_SETHWDEBUG
+
+Sets a hardware breakpoint or watchpoint, according to the provided structure:
+
+struct ppc_hw_breakpoint {
+ uint32_t version;
+#define PPC_BREAKPOINT_TRIGGER_EXECUTE 0x1
+#define PPC_BREAKPOINT_TRIGGER_READ 0x2
+#define PPC_BREAKPOINT_TRIGGER_WRITE 0x4
+ uint32_t trigger_type; /* only some combinations allowed */
+#define PPC_BREAKPOINT_MODE_EXACT 0x0
+#define PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE 0x1
+#define PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE 0x2
+#define PPC_BREAKPOINT_MODE_MASK 0x3
+ uint32_t addr_mode; /* address match mode */
+
+#define PPC_BREAKPOINT_CONDITION_MODE 0x3
+#define PPC_BREAKPOINT_CONDITION_NONE 0x0
+#define PPC_BREAKPOINT_CONDITION_AND 0x1
+#define PPC_BREAKPOINT_CONDITION_EXACT 0x1 /* different name for the same thing as above */
+#define PPC_BREAKPOINT_CONDITION_OR 0x2
+#define PPC_BREAKPOINT_CONDITION_AND_OR 0x3
+#define PPC_BREAKPOINT_CONDITION_BE_ALL 0x00ff0000 /* byte enable bits */
+#define PPC_BREAKPOINT_CONDITION_BE(n) (1<<((n)+16))
+ uint32_t condition_mode; /* break/watchpoint condition flags */
+
+ uint64_t addr;
+ uint64_t addr2;
+ uint64_t condition_value;
+};
+
+A request specifies one event, not necessarily just one register to be set.
+For instance, if the request is for a watchpoint with a condition, both the
+DAC and DVC registers will be set in the same request.
+
+With this GDB can ask for all kinds of hardware breakpoints and watchpoints
+that the BookE supports. COMEFROM breakpoints available in server processors
+are not contemplated, but that is out of the scope of this work.
+
+ptrace will return an integer (handle) uniquely identifying the breakpoint or
+watchpoint just created. This integer will be used in the PTRACE_DELHWDEBUG
+request to ask for its removal. Return -ENOSPC if the requested breakpoint
+can't be allocated on the registers.
+
+Some examples of using the structure to:
+
+- set a breakpoint in the first breakpoint register
+
+ p.version = PPC_DEBUG_CURRENT_VERSION;
+ p.trigger_type = PPC_BREAKPOINT_TRIGGER_EXECUTE;
+ p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
+ p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
+ p.addr = (uint64_t) address;
+ p.addr2 = 0;
+ p.condition_value = 0;
+
+- set a watchpoint which triggers on reads in the second watchpoint register
+
+ p.version = PPC_DEBUG_CURRENT_VERSION;
+ p.trigger_type = PPC_BREAKPOINT_TRIGGER_READ;
+ p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
+ p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
+ p.addr = (uint64_t) address;
+ p.addr2 = 0;
+ p.condition_value = 0;
+
+- set a watchpoint which triggers only with a specific value
+
+ p.version = PPC_DEBUG_CURRENT_VERSION;
+ p.trigger_type = PPC_BREAKPOINT_TRIGGER_READ;
+ p.addr_mode = PPC_BREAKPOINT_MODE_EXACT;
+ p.condition_mode = PPC_BREAKPOINT_CONDITION_AND | PPC_BREAKPOINT_CONDITION_BE_ALL;
+ p.addr = (uint64_t) address;
+ p.addr2 = 0;
+ p.condition_value = (uint64_t) condition;
+
+- set a ranged hardware breakpoint
+
+ p.version = PPC_DEBUG_CURRENT_VERSION;
+ p.trigger_type = PPC_BREAKPOINT_TRIGGER_EXECUTE;
+ p.addr_mode = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
+ p.condition_mode = PPC_BREAKPOINT_CONDITION_NONE;
+ p.addr = (uint64_t) begin_range;
+ p.addr2 = (uint64_t) end_range;
+ p.condition_value = 0;
+
+3. PTRACE_DELHWDEBUG
+
+Takes an integer which identifies an existing breakpoint or watchpoint
+(i.e., the value returned from PTRACE_SETHWDEBUG), and deletes the
+corresponding breakpoint or watchpoint..
diff --git a/Documentation/rbtree.txt b/Documentation/rbtree.txt
index aae8355d316..221f38be98f 100644
--- a/Documentation/rbtree.txt
+++ b/Documentation/rbtree.txt
@@ -190,3 +190,61 @@ Example:
for (node = rb_first(&mytree); node; node = rb_next(node))
printk("key=%s\n", rb_entry(node, struct mytype, node)->keystring);
+Support for Augmented rbtrees
+-----------------------------
+
+Augmented rbtree is an rbtree with "some" additional data stored in each node.
+This data can be used to augment some new functionality to rbtree.
+Augmented rbtree is an optional feature built on top of basic rbtree
+infrastructure. rbtree user who wants this feature will have an augment
+callback function in rb_root initialized.
+
+This callback function will be called from rbtree core routines whenever
+a node has a change in one or both of its children. It is the responsibility
+of the callback function to recalculate the additional data that is in the
+rb node using new children information. Note that if this new additional
+data affects the parent node's additional data, then callback function has
+to handle it and do the recursive updates.
+
+
+Interval tree is an example of augmented rb tree. Reference -
+"Introduction to Algorithms" by Cormen, Leiserson, Rivest and Stein.
+More details about interval trees:
+
+Classical rbtree has a single key and it cannot be directly used to store
+interval ranges like [lo:hi] and do a quick lookup for any overlap with a new
+lo:hi or to find whether there is an exact match for a new lo:hi.
+
+However, rbtree can be augmented to store such interval ranges in a structured
+way making it possible to do efficient lookup and exact match.
+
+This "extra information" stored in each node is the maximum hi
+(max_hi) value among all the nodes that are its descendents. This
+information can be maintained at each node just be looking at the node
+and its immediate children. And this will be used in O(log n) lookup
+for lowest match (lowest start address among all possible matches)
+with something like:
+
+find_lowest_match(lo, hi, node)
+{
+ lowest_match = NULL;
+ while (node) {
+ if (max_hi(node->left) > lo) {
+ // Lowest overlap if any must be on left side
+ node = node->left;
+ } else if (overlap(lo, hi, node)) {
+ lowest_match = node;
+ break;
+ } else if (lo > node->lo) {
+ // Lowest overlap if any must be on right side
+ node = node->right;
+ } else {
+ break;
+ }
+ }
+ return lowest_match;
+}
+
+Finding exact match will be to first find lowest match and then to follow
+successor nodes looking for exact match, until the start of a node is beyond
+the hi value we are looking for.
diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt
index b4860509c31..83668e5dd17 100644
--- a/Documentation/rfkill.txt
+++ b/Documentation/rfkill.txt
@@ -99,37 +99,15 @@ system. Also, it is possible to switch all rfkill drivers (or all drivers of
a specified type) into a state which also updates the default state for
hotplugged devices.
-After an application opens /dev/rfkill, it can read the current state of
-all devices, and afterwards can poll the descriptor for hotplug or state
-change events.
-
-Applications must ignore operations (the "op" field) they do not handle,
-this allows the API to be extended in the future.
-
-Additionally, each rfkill device is registered in sysfs and there has the
-following attributes:
-
- name: Name assigned by driver to this key (interface or driver name).
- type: Driver type string ("wlan", "bluetooth", etc).
- persistent: Whether the soft blocked state is initialised from
- non-volatile storage at startup.
- state: Current state of the transmitter
- 0: RFKILL_STATE_SOFT_BLOCKED
- transmitter is turned off by software
- 1: RFKILL_STATE_UNBLOCKED
- transmitter is (potentially) active
- 2: RFKILL_STATE_HARD_BLOCKED
- transmitter is forced off by something outside of
- the driver's control.
- This file is deprecated because it can only properly show
- three of the four possible states, soft-and-hard-blocked is
- missing.
- claim: 0: Kernel handles events
- This file is deprecated because there no longer is a way to
- claim just control over a single rfkill instance.
-
-rfkill devices also issue uevents (with an action of "change"), with the
-following environment variables set:
+After an application opens /dev/rfkill, it can read the current state of all
+devices. Changes can be either obtained by either polling the descriptor for
+hotplug or state change events or by listening for uevents emitted by the
+rfkill core framework.
+
+Additionally, each rfkill device is registered in sysfs and emits uevents.
+
+rfkill devices issue uevents (with an action of "change"), with the following
+environment variables set:
RFKILL_NAME
RFKILL_STATE
@@ -137,3 +115,7 @@ RFKILL_TYPE
The contents of these variables corresponds to the "name", "state" and
"type" sysfs files explained above.
+
+
+For further details consult Documentation/ABI/stable/dev-rfkill and
+Documentation/ABI/stable/sysfs-class-rfkill.
diff --git a/Documentation/rt-mutex-design.txt b/Documentation/rt-mutex-design.txt
index 4b736d24da7..33ed8007a84 100644
--- a/Documentation/rt-mutex-design.txt
+++ b/Documentation/rt-mutex-design.txt
@@ -364,7 +364,7 @@ process this is rather easy to know what needs to be adjusted.
The functions implementing the task adjustments are rt_mutex_adjust_prio,
__rt_mutex_adjust_prio (same as the former, but expects the task pi_lock
-to already be taken), rt_mutex_get_prio, and rt_mutex_setprio.
+to already be taken), rt_mutex_getprio, and rt_mutex_setprio.
rt_mutex_getprio and rt_mutex_setprio are only used in __rt_mutex_adjust_prio.
@@ -657,7 +657,7 @@ here.
The waiter structure has a "task" field that points to the task that is blocked
on the mutex. This field can be NULL the first time it goes through the loop
-or if the task is a pending owner and had it's mutex stolen. If the "task"
+or if the task is a pending owner and had its mutex stolen. If the "task"
field is NULL then we need to set up the accounting for it.
Task blocks on mutex
diff --git a/Documentation/s390/CommonIO b/Documentation/s390/CommonIO
index 339207d11d9..d378cba6645 100644
--- a/Documentation/s390/CommonIO
+++ b/Documentation/s390/CommonIO
@@ -87,6 +87,12 @@ Command line parameters
compatibility, by the device number in hexadecimal (0xabcd or abcd). Device
numbers given as 0xabcd will be interpreted as 0.0.abcd.
+* /proc/cio_settle
+
+ A write request to this file is blocked until all queued cio actions are
+ handled. This will allow userspace to wait for pending work affecting
+ device availability after changing cio_ignore or the hardware configuration.
+
* For some of the information present in the /proc filesystem in 2.4 (namely,
/proc/subchannels and /proc/chpids), see driver-model.txt.
Information formerly in /proc/irq_count is now in /proc/interrupts.
diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt
index 1eb576a023b..86f9f74b2b3 100644
--- a/Documentation/s390/Debugging390.txt
+++ b/Documentation/s390/Debugging390.txt
@@ -2531,5 +2531,5 @@ Special Thanks
==============
Special thanks to Neale Ferguson who maintains a much
prettier HTML version of this page at
-http://penguinvm.princeton.edu/notes.html#Debug390
+http://linuxvm.org/penguinvm/
Bob Grainger Stefan Bader & others for reporting bugs
diff --git a/Documentation/s390/driver-model.txt b/Documentation/s390/driver-model.txt
index bde473df748..ed265cf54cd 100644
--- a/Documentation/s390/driver-model.txt
+++ b/Documentation/s390/driver-model.txt
@@ -223,8 +223,8 @@ touched by the driver - it should use the ccwgroup device's driver_data for its
private data.
To implement a ccwgroup driver, please refer to include/asm/ccwgroup.h. Keep in
-mind that most drivers will need to implement both a ccwgroup and a ccw driver
-(unless you have a meta ccw driver, like cu3088 for lcs and ctc).
+mind that most drivers will need to implement both a ccwgroup and a ccw
+driver.
2. Channel paths
diff --git a/Documentation/s390/kvm.txt b/Documentation/s390/kvm.txt
index 6f5ceb0f09f..85f3280d7ef 100644
--- a/Documentation/s390/kvm.txt
+++ b/Documentation/s390/kvm.txt
@@ -102,7 +102,7 @@ args: unsigned long
see also: include/linux/kvm.h
This ioctl stores the state of the cpu at the guest real address given as
argument, unless one of the following values defined in include/linux/kvm.h
-is given as arguement:
+is given as argument:
KVM_S390_STORE_STATUS_NOADDR - the CPU stores its status to the save area in
absolute lowcore as defined by the principles of operation
KVM_S390_STORE_STATUS_PREFIXED - the CPU stores its status to the save area in
diff --git a/Documentation/scheduler/sched-design-CFS.txt b/Documentation/scheduler/sched-design-CFS.txt
index 6f33593e59e..8239ebbcddc 100644
--- a/Documentation/scheduler/sched-design-CFS.txt
+++ b/Documentation/scheduler/sched-design-CFS.txt
@@ -211,7 +211,7 @@ provide fair CPU time to each such task group. For example, it may be
desirable to first provide fair CPU time to each user on the system and then to
each task belonging to a user.
-CONFIG_GROUP_SCHED strives to achieve exactly that. It lets tasks to be
+CONFIG_CGROUP_SCHED strives to achieve exactly that. It lets tasks to be
grouped and divides CPU time fairly among such groups.
CONFIG_RT_GROUP_SCHED permits to group real-time (i.e., SCHED_FIFO and
@@ -220,38 +220,11 @@ SCHED_RR) tasks.
CONFIG_FAIR_GROUP_SCHED permits to group CFS (i.e., SCHED_NORMAL and
SCHED_BATCH) tasks.
-At present, there are two (mutually exclusive) mechanisms to group tasks for
-CPU bandwidth control purposes:
-
- - Based on user id (CONFIG_USER_SCHED)
-
- With this option, tasks are grouped according to their user id.
-
- - Based on "cgroup" pseudo filesystem (CONFIG_CGROUP_SCHED)
-
- This options needs CONFIG_CGROUPS to be defined, and lets the administrator
+ These options need CONFIG_CGROUPS to be defined, and let the administrator
create arbitrary groups of tasks, using the "cgroup" pseudo filesystem. See
Documentation/cgroups/cgroups.txt for more information about this filesystem.
-Only one of these options to group tasks can be chosen and not both.
-
-When CONFIG_USER_SCHED is defined, a directory is created in sysfs for each new
-user and a "cpu_share" file is added in that directory.
-
- # cd /sys/kernel/uids
- # cat 512/cpu_share # Display user 512's CPU share
- 1024
- # echo 2048 > 512/cpu_share # Modify user 512's CPU share
- # cat 512/cpu_share # Display user 512's CPU share
- 2048
- #
-
-CPU bandwidth between two users is divided in the ratio of their CPU shares.
-For example: if you would like user "root" to get twice the bandwidth of user
-"guest," then set the cpu_share for both the users such that "root"'s cpu_share
-is twice "guest"'s cpu_share.
-
-When CONFIG_CGROUP_SCHED is defined, a "cpu.shares" file is created for each
+When CONFIG_FAIR_GROUP_SCHED is defined, a "cpu.shares" file is created for each
group created using the pseudo filesystem. See example steps below to create
task groups and modify their CPU share using the "cgroups" pseudo filesystem.
@@ -273,24 +246,3 @@ task groups and modify their CPU share using the "cgroups" pseudo filesystem.
# #Launch gmplayer (or your favourite movie player)
# echo <movie_player_pid> > multimedia/tasks
-
-8. Implementation note: user namespaces
-
-User namespaces are intended to be hierarchical. But they are currently
-only partially implemented. Each of those has ramifications for CFS.
-
-First, since user namespaces are hierarchical, the /sys/kernel/uids
-presentation is inadequate. Eventually we will likely want to use sysfs
-tagging to provide private views of /sys/kernel/uids within each user
-namespace.
-
-Second, the hierarchical nature is intended to support completely
-unprivileged use of user namespaces. So if using user groups, then
-we want the users in a user namespace to be children of the user
-who created it.
-
-That is currently unimplemented. So instead, every user in a new
-user namespace will receive 1024 shares just like any user in the
-initial user namespace. Note that at the moment creation of a new
-user namespace requires each of CAP_SYS_ADMIN, CAP_SETUID, and
-CAP_SETGID.
diff --git a/Documentation/scheduler/sched-rt-group.txt b/Documentation/scheduler/sched-rt-group.txt
index 86eabe6c341..605b0d40329 100644
--- a/Documentation/scheduler/sched-rt-group.txt
+++ b/Documentation/scheduler/sched-rt-group.txt
@@ -126,23 +126,12 @@ priority!
2.3 Basis for grouping tasks
----------------------------
-There are two compile-time settings for allocating CPU bandwidth. These are
-configured using the "Basis for grouping tasks" multiple choice menu under
-General setup > Group CPU Scheduler:
-
-a. CONFIG_USER_SCHED (aka "Basis for grouping tasks" = "user id")
-
-This lets you use the virtual files under
-"/sys/kernel/uids/<uid>/cpu_rt_runtime_us" to control he CPU time reserved for
-each user .
-
-The other option is:
-
-.o CONFIG_CGROUP_SCHED (aka "Basis for grouping tasks" = "Control groups")
+Enabling CONFIG_RT_GROUP_SCHED lets you explicitly allocate real
+CPU bandwidth to task groups.
This uses the /cgroup virtual file system and
"/cgroup/<cgroup>/cpu.rt_runtime_us" to control the CPU time reserved for each
-control group instead.
+control group.
For more information on working with control groups, you should read
Documentation/cgroups/cgroups.txt as well.
@@ -161,8 +150,7 @@ For now, this can be simplified to just the following (but see Future plans):
===============
There is work in progress to make the scheduling period for each group
-("/sys/kernel/uids/<uid>/cpu_rt_period_us" or
-"/cgroup/<cgroup>/cpu.rt_period_us" respectively) configurable as well.
+("/cgroup/<cgroup>/cpu.rt_period_us") configurable as well.
The constraint on the period is that a subgroup must have a smaller or
equal period to its parent. But realistically its not very useful _yet_
diff --git a/Documentation/scsi/BusLogic.txt b/Documentation/scsi/BusLogic.txt
index 98023baa0f0..d7fbc9488b9 100644
--- a/Documentation/scsi/BusLogic.txt
+++ b/Documentation/scsi/BusLogic.txt
@@ -47,7 +47,7 @@ tune driver performance and error recovery to their particular needs.
The latest information on Linux support for BusLogic SCSI Host Adapters, as
well as the most recent release of this driver and the latest firmware for the
BT-948/958/958D, will always be available from my Linux Home Page at URL
-"http://www.dandelion.com/Linux/".
+"http://sourceforge.net/projects/dandelion/".
Bug reports should be sent via electronic mail to "lnz@dandelion.com". Please
include with the bug report the complete configuration messages reported by the
diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc
index ff19a52fe00..337c924cc81 100644
--- a/Documentation/scsi/ChangeLog.lpfc
+++ b/Documentation/scsi/ChangeLog.lpfc
@@ -707,7 +707,7 @@ Changes from 20040920 to 20041018
* Integrate patches from Christoph Hellwig: two new helpers common
to lpfc_sli_resume_iocb and lpfc_sli_issue_iocb - singificant
cleanup of those two functions - the unused SLI_IOCB_USE_TXQ is
- gone - lpfc_sli_issue_iocb_wait loses it's flags argument
+ gone - lpfc_sli_issue_iocb_wait loses its flags argument
totally.
* Fix in lpfc_sli.c: we can not store a 5 bit value in a 4-bit
field.
@@ -807,7 +807,7 @@ Changes from 20040908 to 20040920
lpfc_disc_done/lpfc_do_dpc cleanup - lpfc_disc_done can return
void - move lpfc_do_dpc and lpfc_disc_done to lpfc_hbadisc.c -
remove checking of list emptiness before calling lpfc_disc_done,
- it handles the emtpy list case just fine and the additional
+ it handles the empty list case just fine and the additional
instructions cost less then the bustlocked spinlock operations.
* Integrated patch from Christoph Hellwig: This adds a new 64bit
counter instead, brd_no isn't reused anymore. Also some tiny
@@ -989,8 +989,8 @@ Changes from 20040709 to 20040716
* Remove redundant port_cmp != 2 check in if
(!port_cmp) { .... if (port_cmp != 2).... }
* Clock changes: removed struct clk_data and timerList.
- * Clock changes: seperate nodev_tmo and els_retry_delay into 2
- seperate timers and convert to 1 argument changed
+ * Clock changes: separate nodev_tmo and els_retry_delay into 2
+ separate timers and convert to 1 argument changed
LPFC_NODE_FARP_PEND_t to struct lpfc_node_farp_pend convert
ipfarp_tmo to 1 argument convert target struct tmofunc and
rtplunfunc to 1 argument * cr_count, cr_delay and
@@ -1028,7 +1028,7 @@ Changes from 20040614 to 20040709
* Remove the need for buf_tmo.
* Changed ULP_BDE64 to struct ulp_bde64.
* Changed ULP_BDE to struct ulp_bde.
- * Cleanup lpfc_os_return_scsi_cmd() and it's call path.
+ * Cleanup lpfc_os_return_scsi_cmd() and its call path.
* Removed lpfc_no_device_delay.
* Consolidating lpfc_hba_put_event() into lpfc_put_event().
* Removed following attributes and their functionality:
@@ -1514,7 +1514,7 @@ Changes from 20040402 to 20040409
* Remove unused elxclock declaration in elx_sli.h.
* Since everywhere IOCB_ENTRY is used, the return value is cast,
move the cast into the macro.
- * Split ioctls out into seperate files
+ * Split ioctls out into separate files
Changes from 20040326 to 20040402
@@ -1534,7 +1534,7 @@ Changes from 20040326 to 20040402
* Unused variable cleanup
* Use Linux list macros for DMABUF_t
* Break up ioctls into 3 sections, dfc, util, hbaapi
- rearranged code so this could be easily seperated into a
+ rearranged code so this could be easily separated into a
differnet module later All 3 are currently turned on by
defines in lpfc_ioctl.c LPFC_DFC_IOCTL, LPFC_UTIL_IOCTL,
LPFC_HBAAPI_IOCTL
@@ -1551,7 +1551,7 @@ Changes from 20040326 to 20040402
started by lpfc_online(). lpfc_offline() only stopped
els_timeout routine. It now stops all timeout routines
associated with that hba.
- * Replace seperate next and prev pointers in struct
+ * Replace separate next and prev pointers in struct
lpfc_bindlist with list_head type. In elxHBA_t, replace
fc_nlpbind_start and _end with fc_nlpbind_list and use
list_head macros to access it.
diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid
index 38e9e7cadc9..5e07d320817 100644
--- a/Documentation/scsi/ChangeLog.megaraid
+++ b/Documentation/scsi/ChangeLog.megaraid
@@ -215,7 +215,7 @@ Older Version : 2.20.4.5 (scsi module), 2.20.2.5 (cmm module)
3. Convert pci_module_init to pci_register_driver
Convert from pci_module_init to pci_register_driver
- (from:http://kerneljanitors.org/TODO)
+ (from:http://kernelnewbies.org/KernelJanitors/TODO)
- Signed-off-by: Domen Puncer <domen@coderock.org>
4. Use the pre defined DMA mask constants from dma-mapping.h
diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas
index 17ffa060771..30023568805 100644
--- a/Documentation/scsi/ChangeLog.megaraid_sas
+++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -1,3 +1,19 @@
+1 Release Date : Thur. Oct 29, 2009 09:12:45 PST 2009 -
+ (emaild-id:megaraidlinux@lsi.com)
+ Bo Yang
+
+2 Current Version : 00.00.04.17.1-rc1
+3 Older Version : 00.00.04.12
+
+1. Add the pad_0 in mfi frame structure to 0 to fix the
+ context value larger than 32bit value issue.
+
+2. Add the logic drive list to the driver. Driver will
+ keep the logic drive list internal after driver load.
+
+3. driver fixed the device update issue after get the AEN
+ PD delete/ADD, LD add/delete from FW.
+
1 Release Date : Tues. July 28, 2009 10:12:45 PST 2009 -
(emaild-id:megaraidlinux@lsi.com)
Bo Yang
diff --git a/Documentation/scsi/FlashPoint.txt b/Documentation/scsi/FlashPoint.txt
index d5acaa300a4..5b5f29cb9f8 100644
--- a/Documentation/scsi/FlashPoint.txt
+++ b/Documentation/scsi/FlashPoint.txt
@@ -13,7 +13,7 @@ operating system support to its BusLogic brand of FlashPoint Ultra SCSI
host adapters. All of BusLogic's other SCSI host adapters, including the
MultiMaster line, currently support the Linux operating system. Linux
drivers and information will be available on October 15th at
-http://www.dandelion.com/Linux/.
+http://sourceforge.net/projects/dandelion/.
"Mylex is committed to supporting the Linux community," says Peter Shambora,
vice president of marketing for Mylex. "We have supported Linux driver
@@ -27,7 +27,7 @@ Linux is a freely-distributed implementation of UNIX for Intel x86, Sun
SPARC, SGI MIPS, Motorola 68k, Digital Alpha AXP and Motorola PowerPC
machines. It supports a wide range of software, including the X Window
System, Emacs, and TCP/IP networking. Further information is available at
-http://www.linux.org and http://www.ssc.com/linux.
+http://www.linux.org and http://www.ssc.com/.
FlashPoint Host Adapters
@@ -71,7 +71,7 @@ peters@mylex.com
Ever since its introduction last October, the BusLogic FlashPoint LT has
been problematic for members of the Linux community, in that no Linux
-drivers have been available for this new Ultra SCSI product. Despite it's
+drivers have been available for this new Ultra SCSI product. Despite its
officially being positioned as a desktop workstation product, and not being
particularly well suited for a high performance multitasking operating
system like Linux, the FlashPoint LT has been touted by computer system
diff --git a/Documentation/scsi/Mylex.txt b/Documentation/scsi/Mylex.txt
index cdf69293f7d..3797f3e6c2b 100644
--- a/Documentation/scsi/Mylex.txt
+++ b/Documentation/scsi/Mylex.txt
@@ -2,4 +2,4 @@ Please see the file README.BusLogic for information about Linux support for
Mylex (formerly BusLogic) MultiMaster and FlashPoint SCSI Host Adapters.
The Mylex DAC960 PCI RAID Controllers are now supported. Please consult
-http://www.dandelion.com/Linux/ for further information on the DAC960 driver.
+http://sourceforge.net/projects/dandelion for further information on the DAC960 driver.
diff --git a/Documentation/scsi/NinjaSCSI.txt b/Documentation/scsi/NinjaSCSI.txt
index 3229b64cf24..ac8db8ceec7 100644
--- a/Documentation/scsi/NinjaSCSI.txt
+++ b/Documentation/scsi/NinjaSCSI.txt
@@ -3,8 +3,6 @@
1. Comment
This is Workbit corp.'s(http://www.workbit.co.jp/) NinjaSCSI-3
-(http://www.workbit.co.jp/ts/z_nj3r.html) and NinjaSCSI-32Bi
-(http://www.workbit.co.jp/ts/z_njsc32bi.html) PCMCIA card driver module
for Linux.
2. My Linux environment
diff --git a/Documentation/scsi/aic79xx.txt b/Documentation/scsi/aic79xx.txt
index c014eccaf19..16e054c9c70 100644
--- a/Documentation/scsi/aic79xx.txt
+++ b/Documentation/scsi/aic79xx.txt
@@ -447,7 +447,7 @@ The following information is available in this file:
http://www.adaptec.com/buy-cables/.
Europe
- - Visit our Web site at http://www.adaptec-europe.com/.
+ - Visit our Web site at http://www.adaptec.com/en-US/_common/world_index.
- To speak with a Technical Support Specialist, call, or email,
* German: +49 89 4366 5522, Monday-Friday, 9:00-17:00 CET,
http://ask-de.adaptec.com/.
diff --git a/Documentation/scsi/aic7xxx.txt b/Documentation/scsi/aic7xxx.txt
index b7e238cbb5a..18f8d1905e6 100644
--- a/Documentation/scsi/aic7xxx.txt
+++ b/Documentation/scsi/aic7xxx.txt
@@ -344,7 +344,7 @@ The following information is available in this file:
http://www.adaptec.com/buy-cables/.
Europe
- - Visit our Web site at http://www.adaptec-europe.com/.
+ - Visit our Web site at http://www.adaptec.com/en-US/_common/world_index.
- To speak with a Technical Support Specialist, call, or email,
* German: +49 89 4366 5522, Monday-Friday, 9:00-17:00 CET,
http://ask-de.adaptec.com/.
diff --git a/Documentation/scsi/dtc3x80.txt b/Documentation/scsi/dtc3x80.txt
index e8ae6230ab3..1d7af9f9a8e 100644
--- a/Documentation/scsi/dtc3x80.txt
+++ b/Documentation/scsi/dtc3x80.txt
@@ -12,7 +12,7 @@ The 3180 does not. Otherwise, they are identical.
The DTC3x80 does not support DMA but it does have Pseudo-DMA which is
supported by the driver.
-It's DTC406 scsi chip is supposedly compatible with the NCR 53C400.
+Its DTC406 scsi chip is supposedly compatible with the NCR 53C400.
It is memory mapped, uses an IRQ, but no dma or io-port. There is
internal DMA, between SCSI bus and an on-chip 128-byte buffer. Double
buffering is done automagically by the chip. Data is transferred
diff --git a/Documentation/scsi/hpsa.txt b/Documentation/scsi/hpsa.txt
new file mode 100644
index 00000000000..dca658362cb
--- /dev/null
+++ b/Documentation/scsi/hpsa.txt
@@ -0,0 +1,107 @@
+
+HPSA - Hewlett Packard Smart Array driver
+-----------------------------------------
+
+This file describes the hpsa SCSI driver for HP Smart Array controllers.
+The hpsa driver is intended to supplant the cciss driver for newer
+Smart Array controllers. The hpsa driver is a SCSI driver, while the
+cciss driver is a "block" driver. Actually cciss is both a block
+driver (for logical drives) AND a SCSI driver (for tape drives). This
+"split-brained" design of the cciss driver is a source of excess
+complexity and eliminating that complexity is one of the reasons
+for hpsa to exist.
+
+Supported devices:
+------------------
+
+Smart Array P212
+Smart Array P410
+Smart Array P410i
+Smart Array P411
+Smart Array P812
+Smart Array P712m
+Smart Array P711m
+StorageWorks P1210m
+
+Additionally, older Smart Arrays may work with the hpsa driver if the kernel
+boot parameter "hpsa_allow_any=1" is specified, however these are not tested
+nor supported by HP with this driver. For older Smart Arrays, the cciss
+driver should still be used.
+
+HPSA specific entries in /sys
+-----------------------------
+
+ In addition to the generic SCSI attributes available in /sys, hpsa supports
+ the following attributes:
+
+ HPSA specific host attributes:
+ ------------------------------
+
+ /sys/class/scsi_host/host*/rescan
+ /sys/class/scsi_host/host*/firmware_revision
+
+ the host "rescan" attribute is a write only attribute. Writing to this
+ attribute will cause the driver to scan for new, changed, or removed devices
+ (e.g. hot-plugged tape drives, or newly configured or deleted logical drives,
+ etc.) and notify the SCSI midlayer of any changes detected. Normally this is
+ triggered automatically by HP's Array Configuration Utility (either the GUI or
+ command line variety) so for logical drive changes, the user should not
+ normally have to use this. It may be useful when hot plugging devices like
+ tape drives, or entire storage boxes containing pre-configured logical drives.
+
+ The "firmware_revision" attribute contains the firmware version of the Smart Array.
+ For example:
+
+ root@host:/sys/class/scsi_host/host4# cat firmware_revision
+ 7.14
+
+ HPSA specific disk attributes:
+ ------------------------------
+
+ /sys/class/scsi_disk/c:b:t:l/device/unique_id
+ /sys/class/scsi_disk/c:b:t:l/device/raid_level
+ /sys/class/scsi_disk/c:b:t:l/device/lunid
+
+ (where c:b:t:l are the controller, bus, target and lun of the device)
+
+ For example:
+
+ root@host:/sys/class/scsi_disk/4:0:0:0/device# cat unique_id
+ 600508B1001044395355323037570F77
+ root@host:/sys/class/scsi_disk/4:0:0:0/device# cat lunid
+ 0x0000004000000000
+ root@host:/sys/class/scsi_disk/4:0:0:0/device# cat raid_level
+ RAID 0
+
+HPSA specific ioctls:
+---------------------
+
+ For compatibility with applications written for the cciss driver, many, but
+ not all of the ioctls supported by the cciss driver are also supported by the
+ hpsa driver. The data structures used by these are described in
+ include/linux/cciss_ioctl.h
+
+ CCISS_DEREGDISK
+ CCISS_REGNEWDISK
+ CCISS_REGNEWD
+
+ The above three ioctls all do exactly the same thing, which is to cause the driver
+ to rescan for new devices. This does exactly the same thing as writing to the
+ hpsa specific host "rescan" attribute.
+
+ CCISS_GETPCIINFO
+
+ Returns PCI domain, bus, device and function and "board ID" (PCI subsystem ID).
+
+ CCISS_GETDRIVVER
+
+ Returns driver version in three bytes encoded as:
+ (major_version << 16) | (minor_version << 8) | (subminor_version)
+
+ CCISS_PASSTHRU
+ CCISS_BIG_PASSTHRU
+
+ Allows "BMIC" and "CISS" commands to be passed through to the Smart Array.
+ These are used extensively by the HP Array Configuration Utility, SNMP storage
+ agents, etc. See cciss_vol_status at http://cciss.sf.net for some examples.
+
diff --git a/Documentation/scsi/ibmmca.txt b/Documentation/scsi/ibmmca.txt
index 3920f28710c..45d61ad8c6f 100644
--- a/Documentation/scsi/ibmmca.txt
+++ b/Documentation/scsi/ibmmca.txt
@@ -1109,7 +1109,7 @@
Q: Where can I find the latest info about this driver?
A: See the file MAINTAINERS for the current WWW-address, which offers
updates, info and Q/A lists. At this file's origin, the webaddress
- was: http://www.uni-mainz.de/~langm000/linux.html
+ was: http://www.staff.uni-mainz.de/mlang/linux.html
Q: My SCSI-adapter is not recognized by the driver, what can I do?
A: Just force it to be recognized by kernel parameters. See section 5.1.
If this really happens, do also send e-mail to the maintainer, as
diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt
index 08e2b4d04aa..cda5f8fa2c6 100644
--- a/Documentation/scsi/ncr53c8xx.txt
+++ b/Documentation/scsi/ncr53c8xx.txt
@@ -1479,7 +1479,7 @@ Wide16 SCSI.
Enabling serial NVRAM support enables detection of the serial NVRAM included
on Symbios and some Symbios compatible host adaptors, and Tekram boards. The
serial NVRAM is used by Symbios and Tekram to hold set up parameters for the
-host adaptor and it's attached drives.
+host adaptor and its attached drives.
The Symbios NVRAM also holds data on the boot order of host adaptors in a
system with more than one host adaptor. This enables the order of scanning
diff --git a/Documentation/scsi/osst.txt b/Documentation/scsi/osst.txt
index f536907e241..ad86c6d1e89 100644
--- a/Documentation/scsi/osst.txt
+++ b/Documentation/scsi/osst.txt
@@ -40,7 +40,7 @@ behavior looks very much the same as st to the userspace applications.
History
-------
-In the first place, osst shared it's identity very much with st. That meant
+In the first place, osst shared its identity very much with st. That meant
that it used the same kernel structures and the same device node as st.
So you could only have either of them being present in the kernel. This has
been fixed by registering an own device, now.
@@ -135,7 +135,7 @@ The driver development is coordinated through a mailing list
a CVS repository and some web pages.
The tester's pages which contain recent news and updated drivers to download
can be found on
-http://linux1.onstream.nl/test/
+http://sourceforge.net/projects/osst/
If you find any problems, please have a look at the tester's page in order
to see whether the problem is already known and solved. Otherwise, please
diff --git a/Documentation/scsi/ppa.txt b/Documentation/scsi/ppa.txt
index 067ac394e0b..05ff47dbe8d 100644
--- a/Documentation/scsi/ppa.txt
+++ b/Documentation/scsi/ppa.txt
@@ -1,13 +1,13 @@
-------- Terse where to get ZIP Drive help info --------
General Iomega ZIP drive page for Linux:
-http://www.torque.net/~campbell/
+http://web.archive.org/web/*/http://www.torque.net/~campbell/
Driver archive for old drivers:
-http://www.torque.net/~campbell/ppa/
+http://web.archive.org/web/*/http://www.torque.net/~campbell/ppa
Linux Parport page (parallel port)
-http://www.torque.net/parport/
+http://web.archive.org/web/*/http://www.torque.net/parport/
Email list for Linux Parport
linux-parport@torque.net
diff --git a/Documentation/scsi/scsi-generic.txt b/Documentation/scsi/scsi-generic.txt
index c38e2b3648e..0a22ab8ea0c 100644
--- a/Documentation/scsi/scsi-generic.txt
+++ b/Documentation/scsi/scsi-generic.txt
@@ -34,11 +34,11 @@ http://www.tldp.org/HOWTO/SCSI-Generic-HOWTO
This describes the sg version 3 driver found in the lk 2.4 series.
The LDP renders documents in single and multiple page HTML, postscript
and pdf. This document can also be found at:
-http://www.torque.net/sg/p/sg_v3_ho.html
+http://sg.danny.cz/sg/p/sg_v3_ho.html
Documentation for the version 2 sg driver found in the lk 2.2 series can
-be found at http://www.torque.net/sg/p/scsi-generic.txt . A larger version
-is at: http://www.torque.net/sg/p/scsi-generic_long.txt .
+be found at http://sg.danny.cz/sg/. A larger version
+is at: http://sg.danny.cz/sg/p/scsi-generic_long.txt.
The original documentation for the sg driver (prior to lk 2.2.6) can be
found at http://www.torque.net/sg/p/original/SCSI-Programming-HOWTO.txt
@@ -61,7 +61,7 @@ There are two packages of sg utilities:
- sg_utils for the sg version 2 (and original) driver found in lk 2.2
and earlier
Both packages will work in the lk 2.4 series however sg3_utils offers more
-capabilities. They can be found at: http://www.torque.net/sg and
+capabilities. They can be found at: http://sg.danny.cz/sg/sg3_utils.html and
freshmeat.net
Another approach is to look at the applications that use the sg driver.
diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt
new file mode 100644
index 00000000000..21e5798526e
--- /dev/null
+++ b/Documentation/scsi/scsi-parameters.txt
@@ -0,0 +1,139 @@
+ SCSI Kernel Parameters
+ ~~~~~~~~~~~~~~~~~~~~~~
+
+See Documentation/kernel-parameters.txt for general information on
+specifying module parameters.
+
+This document may not be entirely up to date and comprehensive. The command
+"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
+module. Loadable modules, after being loaded into the running kernel, also
+reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
+parameters may be changed at runtime by the command
+"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
+
+
+ advansys= [HW,SCSI]
+ See header of drivers/scsi/advansys.c.
+
+ aha152x= [HW,SCSI]
+ See Documentation/scsi/aha152x.txt.
+
+ aha1542= [HW,SCSI]
+ Format: <portbase>[,<buson>,<busoff>[,<dmaspeed>]]
+
+ aic7xxx= [HW,SCSI]
+ See Documentation/scsi/aic7xxx.txt.
+
+ aic79xx= [HW,SCSI]
+ See Documentation/scsi/aic79xx.txt.
+
+ atascsi= [HW,SCSI] Atari SCSI
+
+ BusLogic= [HW,SCSI]
+ See drivers/scsi/BusLogic.c, comment before function
+ BusLogic_ParseDriverOptions().
+
+ dtc3181e= [HW,SCSI]
+
+ eata= [HW,SCSI]
+
+ fd_mcs= [HW,SCSI]
+ See header of drivers/scsi/fd_mcs.c.
+
+ fdomain= [HW,SCSI]
+ See header of drivers/scsi/fdomain.c.
+
+ gdth= [HW,SCSI]
+ See header of drivers/scsi/gdth.c.
+
+ gvp11= [HW,SCSI]
+
+ ibmmcascsi= [HW,MCA,SCSI] IBM MicroChannel SCSI adapter
+ See Documentation/mca.txt.
+
+ in2000= [HW,SCSI]
+ See header of drivers/scsi/in2000.c.
+
+ ips= [HW,SCSI] Adaptec / IBM ServeRAID controller
+ See header of drivers/scsi/ips.c.
+
+ mac5380= [HW,SCSI] Format:
+ <can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
+
+ max_luns= [SCSI] Maximum number of LUNs to probe.
+ Should be between 1 and 2^32-1.
+
+ max_report_luns=
+ [SCSI] Maximum number of LUNs received.
+ Should be between 1 and 16384.
+
+ NCR_D700= [HW,SCSI]
+ See header of drivers/scsi/NCR_D700.c.
+
+ ncr5380= [HW,SCSI]
+
+ ncr53c400= [HW,SCSI]
+
+ ncr53c400a= [HW,SCSI]
+
+ ncr53c406a= [HW,SCSI]
+
+ ncr53c8xx= [HW,SCSI]
+
+ nodisconnect [HW,SCSI,M68K] Disables SCSI disconnects.
+
+ osst= [HW,SCSI] SCSI Tape Driver
+ Format: <buffer_size>,<write_threshold>
+ See also Documentation/scsi/st.txt.
+
+ pas16= [HW,SCSI]
+ See header of drivers/scsi/pas16.c.
+
+ scsi_debug_*= [SCSI]
+ See drivers/scsi/scsi_debug.c.
+
+ scsi_default_dev_flags=
+ [SCSI] SCSI default device flags
+ Format: <integer>
+
+ scsi_dev_flags= [SCSI] Black/white list entry for vendor and model
+ Format: <vendor>:<model>:<flags>
+ (flags are integer value)
+
+ scsi_logging_level= [SCSI] a bit mask of logging levels
+ See drivers/scsi/scsi_logging.h for bits. Also
+ settable via sysctl at dev.scsi.logging_level
+ (/proc/sys/dev/scsi/logging_level).
+ There is also a nice 'scsi_logging_level' script in the
+ S390-tools package, available for download at
+ http://www-128.ibm.com/developerworks/linux/linux390/s390-tools-1.5.4.html
+
+ scsi_mod.scan= [SCSI] sync (default) scans SCSI busses as they are
+ discovered. async scans them in kernel threads,
+ allowing boot to proceed. none ignores them, expecting
+ user space to do the scan.
+
+ sim710= [SCSI,HW]
+ See header of drivers/scsi/sim710.c.
+
+ st= [HW,SCSI] SCSI tape parameters (buffers, etc.)
+ See Documentation/scsi/st.txt.
+
+ sym53c416= [HW,SCSI]
+ See header of drivers/scsi/sym53c416.c.
+
+ t128= [HW,SCSI]
+ See header of drivers/scsi/t128.c.
+
+ tmscsim= [HW,SCSI]
+ See comment before function dc390_setup() in
+ drivers/scsi/tmscsim.c.
+
+ u14-34f= [HW,SCSI] UltraStor 14F/34F SCSI host adapter
+ See header of drivers/scsi/u14-34f.c.
+
+ wd33c93= [HW,SCSI]
+ See header of drivers/scsi/wd33c93.c.
+
+ wd7000= [HW,SCSI]
+ See header of drivers/scsi/wd7000.c.
diff --git a/Documentation/scsi/scsi.txt b/Documentation/scsi/scsi.txt
index dd1bbf4e98e..3d99d38cb62 100644
--- a/Documentation/scsi/scsi.txt
+++ b/Documentation/scsi/scsi.txt
@@ -4,8 +4,8 @@ The Linux Documentation Project (LDP) maintains a document describing
the SCSI subsystem in the Linux kernel (lk) 2.4 series. See:
http://www.tldp.org/HOWTO/SCSI-2.4-HOWTO . The LDP has single
and multiple page HTML renderings as well as postscript and pdf.
-It can also be found at http://www.torque.net/scsi/SCSI-2.4-HOWTO .
-
+It can also be found at:
+http://web.archive.org/web/*/http://www.torque.net/scsi/SCSI-2.4-HOWTO
Notes on using modules in the SCSI subsystem
============================================
diff --git a/Documentation/scsi/scsi_fc_transport.txt b/Documentation/scsi/scsi_fc_transport.txt
index aec6549ab09..e00192de4d1 100644
--- a/Documentation/scsi/scsi_fc_transport.txt
+++ b/Documentation/scsi/scsi_fc_transport.txt
@@ -70,7 +70,7 @@ Overview:
up to an administrative entity controlling the vport. For example,
if vports are to be associated with virtual machines, a XEN mgmt
utility would be responsible for creating wwpn/wwnn's for the vport,
- using it's own naming authority and OUI. (Note: it already does this
+ using its own naming authority and OUI. (Note: it already does this
for virtual MAC addresses).
@@ -81,7 +81,7 @@ Device Trees and Vport Objects:
with rports and scsi target objects underneath it. Currently the FC
transport creates the vport object and places it under the scsi_host
object corresponding to the physical adapter. The LLDD will allocate
- a new scsi_host for the vport and link it's object under the vport.
+ a new scsi_host for the vport and link its object under the vport.
The remainder of the tree under the vports scsi_host is the same
as the non-NPIV case. The transport is written currently to easily
allow the parent of the vport to be something other than the scsi_host.
diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt
index de67229251d..570ef2b3d79 100644
--- a/Documentation/scsi/scsi_mid_low_api.txt
+++ b/Documentation/scsi/scsi_mid_low_api.txt
@@ -43,7 +43,7 @@ There is a SCSI documentation directory within the kernel source tree,
typically Documentation/scsi . Most documents are in plain
(i.e. ASCII) text. This file is named scsi_mid_low_api.txt and can be
found in that directory. A more recent copy of this document may be found
-at http://www.torque.net/scsi/scsi_mid_low_api.txt.gz .
+at http://web.archive.org/web/20070107183357rn_1/sg.torque.net/scsi/.
Many LLDs are documented there (e.g. aic7xxx.txt). The SCSI mid-level is
briefly described in scsi.txt which contains a url to a document
describing the SCSI subsystem in the lk 2.4 series. Two upper level
diff --git a/Documentation/scsi/sym53c8xx_2.txt b/Documentation/scsi/sym53c8xx_2.txt
index eb9a7b905b6..6f63b798967 100644
--- a/Documentation/scsi/sym53c8xx_2.txt
+++ b/Documentation/scsi/sym53c8xx_2.txt
@@ -687,7 +687,7 @@ maintain the driver code.
Enabling serial NVRAM support enables detection of the serial NVRAM included
on Symbios and some Symbios compatible host adaptors, and Tekram boards. The
serial NVRAM is used by Symbios and Tekram to hold set up parameters for the
-host adaptor and it's attached drives.
+host adaptor and its attached drives.
The Symbios NVRAM also holds data on the boot order of host adaptors in a
system with more than one host adaptor. This information is no longer used
diff --git a/Documentation/serial/moxa-smartio b/Documentation/serial/moxa-smartio
index 5337e80a5b9..d1044391868 100644
--- a/Documentation/serial/moxa-smartio
+++ b/Documentation/serial/moxa-smartio
@@ -76,7 +76,7 @@ Content
GNU General Public License in this version. Please refer to GNU General
Public License announcement in each source code file for more detail.
- In Moxa's Web sites, you may always find latest driver at http://web.moxa.com.
+ In Moxa's Web sites, you may always find latest driver at http://www.moxa.com/.
This version of driver can be installed as Loadable Module (Module driver)
or built-in into kernel (Static driver). You may refer to following
diff --git a/Documentation/serial/tty.txt b/Documentation/serial/tty.txt
index 5e5349a4fcd..7c900507279 100644
--- a/Documentation/serial/tty.txt
+++ b/Documentation/serial/tty.txt
@@ -105,6 +105,10 @@ write_wakeup() - May be called at any point between open and close.
is permitted to call the driver write method from
this function. In such a situation defer it.
+dcd_change() - Report to the tty line the current DCD pin status
+ changes and the relative timestamp. The timestamp
+ can be NULL.
+
Driver Access
diff --git a/Documentation/slow-work.txt b/Documentation/slow-work.txt
deleted file mode 100644
index 9dbf4470c7e..00000000000
--- a/Documentation/slow-work.txt
+++ /dev/null
@@ -1,322 +0,0 @@
- ====================================
- SLOW WORK ITEM EXECUTION THREAD POOL
- ====================================
-
-By: David Howells <dhowells@redhat.com>
-
-The slow work item execution thread pool is a pool of threads for performing
-things that take a relatively long time, such as making mkdir calls.
-Typically, when processing something, these items will spend a lot of time
-blocking a thread on I/O, thus making that thread unavailable for doing other
-work.
-
-The standard workqueue model is unsuitable for this class of work item as that
-limits the owner to a single thread or a single thread per CPU. For some
-tasks, however, more threads - or fewer - are required.
-
-There is just one pool per system. It contains no threads unless something
-wants to use it - and that something must register its interest first. When
-the pool is active, the number of threads it contains is dynamic, varying
-between a maximum and minimum setting, depending on the load.
-
-
-====================
-CLASSES OF WORK ITEM
-====================
-
-This pool support two classes of work items:
-
- (*) Slow work items.
-
- (*) Very slow work items.
-
-The former are expected to finish much quicker than the latter.
-
-An operation of the very slow class may do a batch combination of several
-lookups, mkdirs, and a create for instance.
-
-An operation of the ordinarily slow class may, for example, write stuff or
-expand files, provided the time taken to do so isn't too long.
-
-Operations of both types may sleep during execution, thus tying up the thread
-loaned to it.
-
-A further class of work item is available, based on the slow work item class:
-
- (*) Delayed slow work items.
-
-These are slow work items that have a timer to defer queueing of the item for
-a while.
-
-
-THREAD-TO-CLASS ALLOCATION
---------------------------
-
-Not all the threads in the pool are available to work on very slow work items.
-The number will be between one and one fewer than the number of active threads.
-This is configurable (see the "Pool Configuration" section).
-
-All the threads are available to work on ordinarily slow work items, but a
-percentage of the threads will prefer to work on very slow work items.
-
-The configuration ensures that at least one thread will be available to work on
-very slow work items, and at least one thread will be available that won't work
-on very slow work items at all.
-
-
-=====================
-USING SLOW WORK ITEMS
-=====================
-
-Firstly, a module or subsystem wanting to make use of slow work items must
-register its interest:
-
- int ret = slow_work_register_user(struct module *module);
-
-This will return 0 if successful, or a -ve error upon failure. The module
-pointer should be the module interested in using this facility (almost
-certainly THIS_MODULE).
-
-
-Slow work items may then be set up by:
-
- (1) Declaring a slow_work struct type variable:
-
- #include <linux/slow-work.h>
-
- struct slow_work myitem;
-
- (2) Declaring the operations to be used for this item:
-
- struct slow_work_ops myitem_ops = {
- .get_ref = myitem_get_ref,
- .put_ref = myitem_put_ref,
- .execute = myitem_execute,
- };
-
- [*] For a description of the ops, see section "Item Operations".
-
- (3) Initialising the item:
-
- slow_work_init(&myitem, &myitem_ops);
-
- or:
-
- delayed_slow_work_init(&myitem, &myitem_ops);
-
- or:
-
- vslow_work_init(&myitem, &myitem_ops);
-
- depending on its class.
-
-A suitably set up work item can then be enqueued for processing:
-
- int ret = slow_work_enqueue(&myitem);
-
-This will return a -ve error if the thread pool is unable to gain a reference
-on the item, 0 otherwise, or (for delayed work):
-
- int ret = delayed_slow_work_enqueue(&myitem, my_jiffy_delay);
-
-
-The items are reference counted, so there ought to be no need for a flush
-operation. But as the reference counting is optional, means to cancel
-existing work items are also included:
-
- cancel_slow_work(&myitem);
- cancel_delayed_slow_work(&myitem);
-
-can be used to cancel pending work. The above cancel function waits for
-existing work to have been executed (or prevent execution of them, depending
-on timing).
-
-
-When all a module's slow work items have been processed, and the
-module has no further interest in the facility, it should unregister its
-interest:
-
- slow_work_unregister_user(struct module *module);
-
-The module pointer is used to wait for all outstanding work items for that
-module before completing the unregistration. This prevents the put_ref() code
-from being taken away before it completes. module should almost certainly be
-THIS_MODULE.
-
-
-================
-HELPER FUNCTIONS
-================
-
-The slow-work facility provides a function by which it can be determined
-whether or not an item is queued for later execution:
-
- bool queued = slow_work_is_queued(struct slow_work *work);
-
-If it returns false, then the item is not on the queue (it may be executing
-with a requeue pending). This can be used to work out whether an item on which
-another depends is on the queue, thus allowing a dependent item to be queued
-after it.
-
-If the above shows an item on which another depends not to be queued, then the
-owner of the dependent item might need to wait. However, to avoid locking up
-the threads unnecessarily be sleeping in them, it can make sense under some
-circumstances to return the work item to the queue, thus deferring it until
-some other items have had a chance to make use of the yielded thread.
-
-To yield a thread and defer an item, the work function should simply enqueue
-the work item again and return. However, this doesn't work if there's nothing
-actually on the queue, as the thread just vacated will jump straight back into
-the item's work function, thus busy waiting on a CPU.
-
-Instead, the item should use the thread to wait for the dependency to go away,
-but rather than using schedule() or schedule_timeout() to sleep, it should use
-the following function:
-
- bool requeue = slow_work_sleep_till_thread_needed(
- struct slow_work *work,
- signed long *_timeout);
-
-This will add a second wait and then sleep, such that it will be woken up if
-either something appears on the queue that could usefully make use of the
-thread - and behind which this item can be queued, or if the event the caller
-set up to wait for happens. True will be returned if something else appeared
-on the queue and this work function should perhaps return, of false if
-something else woke it up. The timeout is as for schedule_timeout().
-
-For example:
-
- wq = bit_waitqueue(&my_flags, MY_BIT);
- init_wait(&wait);
- requeue = false;
- do {
- prepare_to_wait(wq, &wait, TASK_UNINTERRUPTIBLE);
- if (!test_bit(MY_BIT, &my_flags))
- break;
- requeue = slow_work_sleep_till_thread_needed(&my_work,
- &timeout);
- } while (timeout > 0 && !requeue);
- finish_wait(wq, &wait);
- if (!test_bit(MY_BIT, &my_flags)
- goto do_my_thing;
- if (requeue)
- return; // to slow_work
-
-
-===============
-ITEM OPERATIONS
-===============
-
-Each work item requires a table of operations of type struct slow_work_ops.
-Only ->execute() is required; the getting and putting of a reference and the
-describing of an item are all optional.
-
- (*) Get a reference on an item:
-
- int (*get_ref)(struct slow_work *work);
-
- This allows the thread pool to attempt to pin an item by getting a
- reference on it. This function should return 0 if the reference was
- granted, or a -ve error otherwise. If an error is returned,
- slow_work_enqueue() will fail.
-
- The reference is held whilst the item is queued and whilst it is being
- executed. The item may then be requeued with the same reference held, or
- the reference will be released.
-
- (*) Release a reference on an item:
-
- void (*put_ref)(struct slow_work *work);
-
- This allows the thread pool to unpin an item by releasing the reference on
- it. The thread pool will not touch the item again once this has been
- called.
-
- (*) Execute an item:
-
- void (*execute)(struct slow_work *work);
-
- This should perform the work required of the item. It may sleep, it may
- perform disk I/O and it may wait for locks.
-
- (*) View an item through /proc:
-
- void (*desc)(struct slow_work *work, struct seq_file *m);
-
- If supplied, this should print to 'm' a small string describing the work
- the item is to do. This should be no more than about 40 characters, and
- shouldn't include a newline character.
-
- See the 'Viewing executing and queued items' section below.
-
-
-==================
-POOL CONFIGURATION
-==================
-
-The slow-work thread pool has a number of configurables:
-
- (*) /proc/sys/kernel/slow-work/min-threads
-
- The minimum number of threads that should be in the pool whilst it is in
- use. This may be anywhere between 2 and max-threads.
-
- (*) /proc/sys/kernel/slow-work/max-threads
-
- The maximum number of threads that should in the pool. This may be
- anywhere between min-threads and 255 or NR_CPUS * 2, whichever is greater.
-
- (*) /proc/sys/kernel/slow-work/vslow-percentage
-
- The percentage of active threads in the pool that may be used to execute
- very slow work items. This may be between 1 and 99. The resultant number
- is bounded to between 1 and one fewer than the number of active threads.
- This ensures there is always at least one thread that can process very
- slow work items, and always at least one thread that won't.
-
-
-==================================
-VIEWING EXECUTING AND QUEUED ITEMS
-==================================
-
-If CONFIG_SLOW_WORK_DEBUG is enabled, a debugfs file is made available:
-
- /sys/kernel/debug/slow_work/runqueue
-
-through which the list of work items being executed and the queues of items to
-be executed may be viewed. The owner of a work item is given the chance to
-add some information of its own.
-
-The contents look something like the following:
-
- THR PID ITEM ADDR FL MARK DESC
- === ===== ================ == ===== ==========
- 0 3005 ffff880023f52348 a 952ms FSC: OBJ17d3: LOOK
- 1 3006 ffff880024e33668 2 160ms FSC: OBJ17e5 OP60d3b: Write1/Store fl=2
- 2 3165 ffff8800296dd180 a 424ms FSC: OBJ17e4: LOOK
- 3 4089 ffff8800262c8d78 a 212ms FSC: OBJ17ea: CRTN
- 4 4090 ffff88002792bed8 2 388ms FSC: OBJ17e8 OP60d36: Write1/Store fl=2
- 5 4092 ffff88002a0ef308 2 388ms FSC: OBJ17e7 OP60d2e: Write1/Store fl=2
- 6 4094 ffff88002abaf4b8 2 132ms FSC: OBJ17e2 OP60d4e: Write1/Store fl=2
- 7 4095 ffff88002bb188e0 a 388ms FSC: OBJ17e9: CRTN
- vsq - ffff880023d99668 1 308ms FSC: OBJ17e0 OP60f91: Write1/EnQ fl=2
- vsq - ffff8800295d1740 1 212ms FSC: OBJ16be OP4d4b6: Write1/EnQ fl=2
- vsq - ffff880025ba3308 1 160ms FSC: OBJ179a OP58dec: Write1/EnQ fl=2
- vsq - ffff880024ec83e0 1 160ms FSC: OBJ17ae OP599f2: Write1/EnQ fl=2
- vsq - ffff880026618e00 1 160ms FSC: OBJ17e6 OP60d33: Write1/EnQ fl=2
- vsq - ffff880025a2a4b8 1 132ms FSC: OBJ16a2 OP4d583: Write1/EnQ fl=2
- vsq - ffff880023cbe6d8 9 212ms FSC: OBJ17eb: LOOK
- vsq - ffff880024d37590 9 212ms FSC: OBJ17ec: LOOK
- vsq - ffff880027746cb0 9 212ms FSC: OBJ17ed: LOOK
- vsq - ffff880024d37ae8 9 212ms FSC: OBJ17ee: LOOK
- vsq - ffff880024d37cb0 9 212ms FSC: OBJ17ef: LOOK
- vsq - ffff880025036550 9 212ms FSC: OBJ17f0: LOOK
- vsq - ffff8800250368e0 9 212ms FSC: OBJ17f1: LOOK
- vsq - ffff880025036aa8 9 212ms FSC: OBJ17f2: LOOK
-
-In the 'THR' column, executing items show the thread they're occupying and
-queued threads indicate which queue they're on. 'PID' shows the process ID of
-a slow-work thread that's executing something. 'FL' shows the work item flags.
-'MARK' indicates how long since an item was queued or began executing. Lastly,
-the 'DESC' column permits the owner of an item to give some information.
-
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 8923597bd2b..7f4dcebda9c 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -227,6 +227,16 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
The power-management is supported.
+ Module snd-asihpi
+ -----------------
+
+ Module for AudioScience ASI soundcards
+
+ enable_hpi_hwdep - enable HPI hwdep for AudioScience soundcard
+
+ This module supports multiple cards.
+ The driver requires the firmware loader support on kernel.
+
Module snd-atiixp
-----------------
@@ -482,6 +492,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
reference_rate - reference sample rate, 44100 or 48000 (default)
multiple - multiple to ref. sample rate, 1 or 2 (default)
+ subsystem - override the PCI SSID for probing; the value
+ consists of SSVID << 16 | SSDID. The default is
+ zero, which means no override.
This module supports multiple cards.
@@ -619,28 +632,23 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
The power-management is supported.
- Module snd-es968
- ----------------
-
- Module for sound cards based on ESS ES968 chip (PnP only).
-
- This module supports multiple cards, PnP and autoprobe.
-
- The power-management is supported.
-
Module snd-es1688
-----------------
Module for ESS AudioDrive ES-1688 and ES-688 sound cards.
- port - port # for ES-1688 chip (0x220,0x240,0x260)
- fm_port - port # for OPL3 (option; share the same port as default)
+ isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
mpu_port - port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
- irq - IRQ # for ES-1688 chip (5,7,9,10)
mpu_irq - IRQ # for MPU-401 port (5,7,9,10)
+ fm_port - port # for OPL3 (option; share the same port as default)
+
+ with isapnp=0, the following additional options are available:
+ port - port # for ES-1688 chip (0x220,0x240,0x260)
+ irq - IRQ # for ES-1688 chip (5,7,9,10)
dma8 - DMA # for ES-1688 chip (0,1,3)
- This module supports multiple cards and autoprobe (without MPU-401 port).
+ This module supports multiple cards and autoprobe (without MPU-401 port)
+ and PnP with the ES968 chip.
Module snd-es18xx
-----------------
@@ -1123,6 +1131,21 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
This module supports multiple cards, autoprobe and ISA PnP.
+ Module snd-jazz16
+ -------------------
+
+ Module for Media Vision Jazz16 chipset. The chipset consists of 3 chips:
+ MVD1216 + MVA416 + MVA514.
+
+ port - port # for SB DSP chip (0x210,0x220,0x230,0x240,0x250,0x260)
+ irq - IRQ # for SB DSP chip (3,5,7,9,10,15)
+ dma8 - DMA # for SB DSP chip (1,3)
+ dma16 - DMA # for SB DSP chip (5,7)
+ mpu_port - MPU-401 port # (0x300,0x310,0x320,0x330)
+ mpu_irq - MPU-401 irq # (2,3,5,7)
+
+ This module supports multiple cards.
+
Module snd-korg1212
-------------------
@@ -1262,7 +1285,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
about this driver. Note that it has been discontinued, but the
Voyetra Turtle Beach knowledge base entry for it is still available
at
- http://www.turtlebeach.com/site/kb_ftp/790.asp
+ http://www.turtlebeach.com
Module snd-msnd-pinnacle
------------------------
@@ -1791,6 +1814,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
The power-management is supported.
+ Module snd-ua101
+ ----------------
+
+ Module for the Edirol UA-101/UA-1000 audio/MIDI interfaces.
+
+ This module supports multiple devices, autoprobe and hotplugging.
+
Module snd-usb-audio
--------------------
@@ -1923,7 +1953,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
-------------------
Module for sound cards based on the Asus AV100/AV200 chips,
- i.e., Xonar D1, DX, D2, D2X, HDAV1.3 (Deluxe), Essence ST
+ i.e., Xonar D1, DX, D2, D2X, DS, HDAV1.3 (Deluxe), Essence ST
(Deluxe) and Essence STX.
This module supports autoprobe and multiple cards.
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index e72cee9e2a7..37c6aad5e59 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -83,8 +83,8 @@ ALC269
======
basic Basic preset
quanta Quanta FL1
- eeepc-p703 ASUS Eeepc P703 P900A
- eeepc-p901 ASUS Eeepc P901 S101
+ laptop-amic Laptops with analog-mic input
+ laptop-dmic Laptops with digital-mic input
fujitsu FSC Amilo
lifebook Fujitsu Lifebook S6420
auto auto-config reading BIOS (default)
@@ -109,11 +109,18 @@ ALC662/663/272
asus-mode4 ASUS
asus-mode5 ASUS
asus-mode6 ASUS
+ asus-mode7 ASUS
+ asus-mode8 ASUS
dell Dell with ALC272
dell-zm1 Dell ZM1 with ALC272
samsung-nc10 Samsung NC10 mini notebook
auto auto-config reading BIOS (default)
+ALC680
+======
+ base Base model (ASUS NX90)
+ auto auto-config reading BIOS (default)
+
ALC882/883/885/888/889
======================
3stack-dig 3-jack with SPDIF I/O
@@ -124,6 +131,8 @@ ALC882/883/885/888/889
asus-a7m ASUS A7M
macpro MacPro support
mb5 Macbook 5,1
+ macmini3 Macmini 3,1
+ mba21 Macbook Air 2,1
mbp3 Macbook Pro rev3
imac24 iMac 24'' with jack detection
imac91 iMac 9,1
@@ -279,13 +288,20 @@ Conexant 5051
laptop Basic Laptop config (default)
hp HP Spartan laptop
hp-dv6736 HP dv6736
+ hp-f700 HP Compaq Presario F700
+ ideapad Lenovo IdeaPad laptop
lenovo-x200 Lenovo X200 laptop
+ toshiba Toshiba Satellite M300
Conexant 5066
=============
laptop Basic Laptop config (default)
+ hp-laptop HP laptops, e g G60
dell-laptop Dell laptops
+ dell-vostro Dell Vostro
olpc-xo-1_5 OLPC XO 1.5
+ ideapad Lenovo IdeaPad U150
+ thinkpad Lenovo Thinkpad
STAC9200
========
@@ -393,6 +409,7 @@ STAC92HD83*
mic-ref Reference board with power management for ports
dell-s14 Dell laptop
hp HP laptops with (inverted) mute-LED
+ hp-dv7-4000 HP dv-7 4000
auto BIOS setup (default)
STAC9872
@@ -405,3 +422,7 @@ Cirrus Logic CS4206/4207
mbp55 MacBook Pro 5,5
imac27 IMac 27 Inch
auto BIOS setup (default)
+
+VIA VT17xx/VT18xx/VT20xx
+========================
+ auto BIOS setup (default)
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index 6325bec06a7..278cc2122ea 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -119,10 +119,18 @@ the codec slots 0 and 1 no matter what the hardware reports.
Interrupt Handling
~~~~~~~~~~~~~~~~~~
-In rare but some cases, the interrupt isn't properly handled as
-default. You would notice this by the DMA transfer error reported by
-ALSA PCM core, for example. Using MSI might help in such a case.
-Pass `enable_msi=1` option for enabling MSI.
+HD-audio driver uses MSI as default (if available) since 2.6.33
+kernel as MSI works better on some machines, and in general, it's
+better for performance. However, Nvidia controllers showed bad
+regressions with MSI (especially in a combination with AMD chipset),
+thus we disabled MSI for them.
+
+There seem also still other devices that don't work with MSI. If you
+see a regression wrt the sound quality (stuttering, etc) or a lock-up
+in the recent kernel, try to pass `enable_msi=0` option to disable
+MSI. If it works, you can add the known bad device to the blacklist
+defined in hda_intel.c. In such a case, please report and give the
+patch back to the upstream developer.
HD-AUDIO CODEC
@@ -196,7 +204,6 @@ generic parser regardless of the codec. Usually the codec-specific
parser is much better than the generic parser (as now). Thus this
option is more about the debugging purpose.
-
Speaker and Headphone Output
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
One of the most frequent (and obvious) bugs with HD-audio is the
@@ -452,6 +459,33 @@ Similarly, the lines after `[verb]` are parsed as `init_verbs`
sysfs entries, and the lines after `[hint]` are parsed as `hints`
sysfs entries, respectively.
+Another example to override the codec vendor id from 0x12345678 to
+0xdeadbeef is like below:
+------------------------------------------------------------------------
+ [codec]
+ 0x12345678 0xabcd1234 2
+
+ [vendor_id]
+ 0xdeadbeef
+------------------------------------------------------------------------
+
+In the similar way, you can override the codec subsystem_id via
+`[subsystem_id]`, the revision id via `[revision_id]` line.
+Also, the codec chip name can be rewritten via `[chip_name]` line.
+------------------------------------------------------------------------
+ [codec]
+ 0x12345678 0xabcd1234 2
+
+ [subsystem_id]
+ 0xffff1111
+
+ [revision_id]
+ 0x10
+
+ [chip_name]
+ My-own NEWS-0002
+------------------------------------------------------------------------
+
The hd-audio driver reads the file via request_firmware(). Thus,
a patch file has to be located on the appropriate firmware path,
typically, /lib/firmware. For example, when you pass the option
@@ -528,7 +562,7 @@ compare the codec registers directly.
Send a bug report either the followings:
kernel-bugzilla::
- http://bugme.linux-foundation.org/
+ https://bugzilla.kernel.org/
alsa-devel ML::
alsa-devel@alsa-project.org
@@ -565,6 +599,9 @@ probing, the proc file is available, so you can get the raw codec
information before modified by the driver. Of course, the driver
isn't usable with `probe_only=1`. But you can continue the
configuration via hwdep sysfs file if hda-reconfig option is enabled.
+Using `probe_only` mask 2 skips the reset of HDA codecs (use
+`probe_only=3` as module option). The hwdep interface can be used
+to determine the BIOS codec initialization.
hda-verb
diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt
index 07301de12cc..7fcd1ad96fc 100644
--- a/Documentation/sound/alsa/Procfile.txt
+++ b/Documentation/sound/alsa/Procfile.txt
@@ -103,6 +103,8 @@ card*/pcm*/xrun_debug
bit 2 = Enable additional jiffies check
bit 3 = Log hwptr update at each period interrupt
bit 4 = Log hwptr update at each snd_pcm_update_hw_ptr()
+ bit 5 = Show last 10 positions on error
+ bit 6 = Do above only once
When the bit 0 is set, the driver will show the messages to
kernel log when an xrun is detected. The debug message is
@@ -122,6 +124,12 @@ card*/pcm*/xrun_debug
Bits 3 and 4 are for logging the hwptr records. Note that
these will give flood of kernel messages.
+ When bit 5 is set, the driver logs the last 10 xrun errors and
+ the proc file shows each jiffies, position, period_size,
+ buffer_size, old_hw_ptr, and hw_ptr_base values.
+
+ When bit 6 is set, the full xrun log is shown only once.
+
card*/pcm*/sub*/info
The general information of this PCM sub-stream.
diff --git a/Documentation/sound/alsa/alsa-parameters.txt b/Documentation/sound/alsa/alsa-parameters.txt
new file mode 100644
index 00000000000..0fa40679b08
--- /dev/null
+++ b/Documentation/sound/alsa/alsa-parameters.txt
@@ -0,0 +1,135 @@
+ ALSA Kernel Parameters
+ ~~~~~~~~~~~~~~~~~~~~~~
+
+See Documentation/kernel-parameters.txt for general information on
+specifying module parameters.
+
+This document may not be entirely up to date and comprehensive. The command
+"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
+module. Loadable modules, after being loaded into the running kernel, also
+reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
+parameters may be changed at runtime by the command
+"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
+
+
+ snd-ad1816a= [HW,ALSA]
+
+ snd-ad1848= [HW,ALSA]
+
+ snd-ali5451= [HW,ALSA]
+
+ snd-als100= [HW,ALSA]
+
+ snd-als4000= [HW,ALSA]
+
+ snd-azt2320= [HW,ALSA]
+
+ snd-cmi8330= [HW,ALSA]
+
+ snd-cmipci= [HW,ALSA]
+
+ snd-cs4231= [HW,ALSA]
+
+ snd-cs4232= [HW,ALSA]
+
+ snd-cs4236= [HW,ALSA]
+
+ snd-cs4281= [HW,ALSA]
+
+ snd-cs46xx= [HW,ALSA]
+
+ snd-dt019x= [HW,ALSA]
+
+ snd-dummy= [HW,ALSA]
+
+ snd-emu10k1= [HW,ALSA]
+
+ snd-ens1370= [HW,ALSA]
+
+ snd-ens1371= [HW,ALSA]
+
+ snd-es968= [HW,ALSA]
+
+ snd-es1688= [HW,ALSA]
+
+ snd-es18xx= [HW,ALSA]
+
+ snd-es1938= [HW,ALSA]
+
+ snd-es1968= [HW,ALSA]
+
+ snd-fm801= [HW,ALSA]
+
+ snd-gusclassic= [HW,ALSA]
+
+ snd-gusextreme= [HW,ALSA]
+
+ snd-gusmax= [HW,ALSA]
+
+ snd-hdsp= [HW,ALSA]
+
+ snd-ice1712= [HW,ALSA]
+
+ snd-intel8x0= [HW,ALSA]
+
+ snd-interwave= [HW,ALSA]
+
+ snd-interwave-stb=
+ [HW,ALSA]
+
+ snd-korg1212= [HW,ALSA]
+
+ snd-maestro3= [HW,ALSA]
+
+ snd-mpu401= [HW,ALSA]
+
+ snd-mtpav= [HW,ALSA]
+
+ snd-nm256= [HW,ALSA]
+
+ snd-opl3sa2= [HW,ALSA]
+
+ snd-opti92x-ad1848=
+ [HW,ALSA]
+
+ snd-opti92x-cs4231=
+ [HW,ALSA]
+
+ snd-opti93x= [HW,ALSA]
+
+ snd-pmac= [HW,ALSA]
+
+ snd-rme32= [HW,ALSA]
+
+ snd-rme96= [HW,ALSA]
+
+ snd-rme9652= [HW,ALSA]
+
+ snd-sb8= [HW,ALSA]
+
+ snd-sb16= [HW,ALSA]
+
+ snd-sbawe= [HW,ALSA]
+
+ snd-serial= [HW,ALSA]
+
+ snd-sgalaxy= [HW,ALSA]
+
+ snd-sonicvibes= [HW,ALSA]
+
+ snd-sun-amd7930=
+ [HW,ALSA]
+
+ snd-sun-cs4231= [HW,ALSA]
+
+ snd-trident= [HW,ALSA]
+
+ snd-usb-audio= [HW,ALSA,USB]
+
+ snd-via82xx= [HW,ALSA]
+
+ snd-virmidi= [HW,ALSA]
+
+ snd-wavefront= [HW,ALSA]
+
+ snd-ymfpci= [HW,ALSA]
diff --git a/Documentation/sound/alsa/soc/DAI.txt b/Documentation/sound/alsa/soc/DAI.txt
index 0ebd7ea9706..c9679264c55 100644
--- a/Documentation/sound/alsa/soc/DAI.txt
+++ b/Documentation/sound/alsa/soc/DAI.txt
@@ -13,7 +13,7 @@ frame (FRAME) (usually 48kHz) is always driven by the controller. Each AC97
frame is 21uS long and is divided into 13 time slots.
The AC97 specification can be found at :-
-http://www.intel.com/design/chipsets/audio/ac97_r23.pdf
+http://www.intel.com/p/en_US/business/design
I2S
diff --git a/Documentation/sound/alsa/soc/codec.txt b/Documentation/sound/alsa/soc/codec.txt
index 1e95342ed72..37ba3a72cb7 100644
--- a/Documentation/sound/alsa/soc/codec.txt
+++ b/Documentation/sound/alsa/soc/codec.txt
@@ -143,7 +143,7 @@ struct snd_soc_ops {
};
Please refer to the ALSA driver PCM documentation for details.
-http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c436.htm
+http://www.alsa-project.org/~iwai/writing-an-alsa-driver/
5 - DAPM description.
diff --git a/Documentation/sound/alsa/soc/dapm.txt b/Documentation/sound/alsa/soc/dapm.txt
index 9ac842be9b4..05bf5a0eee4 100644
--- a/Documentation/sound/alsa/soc/dapm.txt
+++ b/Documentation/sound/alsa/soc/dapm.txt
@@ -188,8 +188,8 @@ The WM8731 output mixer has 3 inputs (sources)
3. Mic Sidetone Input
Each input in this example has a kcontrol associated with it (defined in example
-above) and is connected to the output mixer via it's kcontrol name. We can now
-connect the destination widget (wrt audio signal) with it's source widgets.
+above) and is connected to the output mixer via its kcontrol name. We can now
+connect the destination widget (wrt audio signal) with its source widgets.
/* output mixer */
{"Output Mixer", "Line Bypass Switch", "Line Input"},
diff --git a/Documentation/sound/alsa/soc/machine.txt b/Documentation/sound/alsa/soc/machine.txt
index bab7711ce96..2524c75557d 100644
--- a/Documentation/sound/alsa/soc/machine.txt
+++ b/Documentation/sound/alsa/soc/machine.txt
@@ -67,7 +67,7 @@ static struct snd_soc_dai_link corgi_dai = {
.ops = &corgi_ops,
};
-struct snd_soc_card then sets up the machine with it's DAIs. e.g.
+struct snd_soc_card then sets up the machine with its DAIs. e.g.
/* corgi audio machine driver */
static struct snd_soc_card snd_soc_corgi = {
diff --git a/Documentation/sound/alsa/soc/overview.txt b/Documentation/sound/alsa/soc/overview.txt
index 1e4c6d3655f..138ac88c146 100644
--- a/Documentation/sound/alsa/soc/overview.txt
+++ b/Documentation/sound/alsa/soc/overview.txt
@@ -33,7 +33,7 @@ features :-
and machines.
* Easy I2S/PCM audio interface setup between codec and SoC. Each SoC
- interface and codec registers it's audio interface capabilities with the
+ interface and codec registers its audio interface capabilities with the
core and are subsequently matched and configured when the application
hardware parameters are known.
diff --git a/Documentation/sound/alsa/soc/platform.txt b/Documentation/sound/alsa/soc/platform.txt
index b681d17fc38..06d835987c6 100644
--- a/Documentation/sound/alsa/soc/platform.txt
+++ b/Documentation/sound/alsa/soc/platform.txt
@@ -39,7 +39,7 @@ struct snd_soc_platform {
};
Please refer to the ALSA driver documentation for details of audio DMA.
-http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c436.htm
+http://www.alsa-project.org/~iwai/writing-an-alsa-driver/
An example DMA driver is soc/pxa/pxa2xx-pcm.c
diff --git a/Documentation/sound/oss/README.OSS b/Documentation/sound/oss/README.OSS
index fd42b05b2f5..c615debbf08 100644
--- a/Documentation/sound/oss/README.OSS
+++ b/Documentation/sound/oss/README.OSS
@@ -36,7 +36,7 @@ with OSS API.
Packages "snd-util-3.8.tar.gz" and "snd-data-0.1.tar.Z"
contain useful utilities to be used with this driver.
-See http://www.opensound.com/ossfree/getting.html for
+See http://www.opensound.com/ossfree/ for
download instructions.
If you are looking for the installation instructions, please
@@ -1438,7 +1438,7 @@ of this driver (see http://www.4Front-tech.com/oss.html for more info).
There are some common audio chipsets that are not supported yet. For example
Sierra Aria and IBM Mwave. It's possible that these architectures
get some support in future but I can't make any promises. Just look
-at the home page (http://www.opensound.com/ossfree/new_cards.html)
+at the home page (http://www.opensound.com/ossfree/)
for latest info.
Information about unsupported sound cards and chipsets is welcome as well
@@ -1449,7 +1449,6 @@ If you have any corrections and/or comments, please contact me.
Hannu Savolainen
hannu@opensound.com
-Personal home page: http://www.compusonic.fi/~hannu
home page of OSS/Free: http://www.opensound.com/ossfree
home page of commercial OSS
diff --git a/Documentation/sound/oss/oss-parameters.txt b/Documentation/sound/oss/oss-parameters.txt
new file mode 100644
index 00000000000..3ab391e7c29
--- /dev/null
+++ b/Documentation/sound/oss/oss-parameters.txt
@@ -0,0 +1,51 @@
+ OSS Kernel Parameters
+ ~~~~~~~~~~~~~~~~~~~~~
+
+See Documentation/kernel-parameters.txt for general information on
+specifying module parameters.
+
+This document may not be entirely up to date and comprehensive. The command
+"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
+module. Loadable modules, after being loaded into the running kernel, also
+reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
+parameters may be changed at runtime by the command
+"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
+
+
+ ad1848= [HW,OSS]
+ Format: <io>,<irq>,<dma>,<dma2>,<type>
+
+ aedsp16= [HW,OSS] Audio Excel DSP 16
+ Format: <io>,<irq>,<dma>,<mss_io>,<mpu_io>,<mpu_irq>
+ See also header of sound/oss/aedsp16.c.
+
+ dmasound= [HW,OSS] Sound subsystem buffers
+
+ mpu401= [HW,OSS]
+ Format: <io>,<irq>
+
+ opl3= [HW,OSS]
+ Format: <io>
+
+ pas2= [HW,OSS] Format:
+ <io>,<irq>,<dma>,<dma16>,<sb_io>,<sb_irq>,<sb_dma>,<sb_dma16>
+
+ pss= [HW,OSS] Personal Sound System (ECHO ESC614)
+ Format:
+ <io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq>
+
+ sscape= [HW,OSS]
+ Format: <io>,<irq>,<dma>,<mpu_io>,<mpu_irq>
+
+ trix= [HW,OSS] MediaTrix AudioTrix Pro
+ Format:
+ <io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
+
+ uart401= [HW,OSS]
+ Format: <io>,<irq>
+
+ uart6850= [HW,OSS]
+ Format: <io>,<irq>
+
+ waveartist= [HW,OSS]
+ Format: <io>,<irq>,<dma>,<dma2>
diff --git a/Documentation/sparse.txt b/Documentation/sparse.txt
index 34c76a55bc0..4909d411635 100644
--- a/Documentation/sparse.txt
+++ b/Documentation/sparse.txt
@@ -1,5 +1,5 @@
Copyright 2004 Linus Torvalds
-Copyright 2004 Pavel Machek <pavel@suse.cz>
+Copyright 2004 Pavel Machek <pavel@ucw.cz>
Copyright 2006 Bob Copeland <me@bobcopeland.com>
Using sparse for typechecking
@@ -54,12 +54,12 @@ Getting sparse
~~~~~~~~~~~~~~
You can get latest released versions from the Sparse homepage at
-http://www.kernel.org/pub/linux/kernel/people/josh/sparse/
+https://sparse.wiki.kernel.org/index.php/Main_Page
Alternatively, you can get snapshots of the latest development version
of sparse using git to clone..
- git://git.kernel.org/pub/scm/linux/kernel/git/josh/sparse.git
+ git://git.kernel.org/pub/scm/devel/sparse/sparse.git
DaveJ has hourly generated tarballs of the git tree available at..
diff --git a/Documentation/spi/ep93xx_spi b/Documentation/spi/ep93xx_spi
new file mode 100644
index 00000000000..6325f5b4863
--- /dev/null
+++ b/Documentation/spi/ep93xx_spi
@@ -0,0 +1,95 @@
+Cirrus EP93xx SPI controller driver HOWTO
+=========================================
+
+ep93xx_spi driver brings SPI master support for EP93xx SPI controller. Chip
+selects are implemented with GPIO lines.
+
+NOTE: If possible, don't use SFRMOUT (SFRM1) signal as a chip select. It will
+not work correctly (it cannot be controlled by software). Use GPIO lines
+instead.
+
+Sample configuration
+====================
+
+Typically driver configuration is done in platform board files (the files under
+arch/arm/mach-ep93xx/*.c). In this example we configure MMC over SPI through
+this driver on TS-7260 board. You can adapt the code to suit your needs.
+
+This example uses EGPIO9 as SD/MMC card chip select (this is wired in DIO1
+header on the board).
+
+You need to select CONFIG_MMC_SPI to use mmc_spi driver.
+
+arch/arm/mach-ep93xx/ts72xx.c:
+
+...
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+
+#include <mach/ep93xx_spi.h>
+
+/* this is our GPIO line used for chip select */
+#define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO9
+
+static int ts72xx_mmc_spi_setup(struct spi_device *spi)
+{
+ int err;
+
+ err = gpio_request(MMC_CHIP_SELECT_GPIO, spi->modalias);
+ if (err)
+ return err;
+
+ gpio_direction_output(MMC_CHIP_SELECT_GPIO, 1);
+
+ return 0;
+}
+
+static void ts72xx_mmc_spi_cleanup(struct spi_device *spi)
+{
+ gpio_set_value(MMC_CHIP_SELECT_GPIO, 1);
+ gpio_direction_input(MMC_CHIP_SELECT_GPIO);
+ gpio_free(MMC_CHIP_SELECT_GPIO);
+}
+
+static void ts72xx_mmc_spi_cs_control(struct spi_device *spi, int value)
+{
+ gpio_set_value(MMC_CHIP_SELECT_GPIO, value);
+}
+
+static struct ep93xx_spi_chip_ops ts72xx_mmc_spi_ops = {
+ .setup = ts72xx_mmc_spi_setup,
+ .cleanup = ts72xx_mmc_spi_cleanup,
+ .cs_control = ts72xx_mmc_spi_cs_control,
+};
+
+static struct spi_board_info ts72xx_spi_devices[] __initdata = {
+ {
+ .modalias = "mmc_spi",
+ .controller_data = &ts72xx_mmc_spi_ops,
+ /*
+ * We use 10 MHz even though the maximum is 7.4 MHz. The driver
+ * will limit it automatically to max. frequency.
+ */
+ .max_speed_hz = 10 * 1000 * 1000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ },
+};
+
+static struct ep93xx_spi_info ts72xx_spi_info = {
+ .num_chipselect = ARRAY_SIZE(ts72xx_spi_devices),
+};
+
+static void __init ts72xx_init_machine(void)
+{
+ ...
+ ep93xx_register_spi(&ts72xx_spi_info, ts72xx_spi_devices,
+ ARRAY_SIZE(ts72xx_spi_devices));
+}
+
+Thanks to
+=========
+Martin Guy, H. Hartley Sweeten and others who helped me during development of
+the driver. Simplemachines.it donated me a Sim.One board which I used testing
+the driver on EP9307.
diff --git a/Documentation/spi/spidev_fdx.c b/Documentation/spi/spidev_fdx.c
index fc354f76038..36ec0774ca0 100644
--- a/Documentation/spi/spidev_fdx.c
+++ b/Documentation/spi/spidev_fdx.c
@@ -58,10 +58,10 @@ static void do_msg(int fd, int len)
len = sizeof buf;
buf[0] = 0xaa;
- xfer[0].tx_buf = (__u64) buf;
+ xfer[0].tx_buf = (unsigned long)buf;
xfer[0].len = 1;
- xfer[1].rx_buf = (__u64) buf;
+ xfer[1].rx_buf = (unsigned long) buf;
xfer[1].len = len;
status = ioctl(fd, SPI_IOC_MESSAGE(2), xfer);
diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c
index 10abd3773e4..16feda90146 100644
--- a/Documentation/spi/spidev_test.c
+++ b/Documentation/spi/spidev_test.c
@@ -58,7 +58,7 @@ static void transfer(int fd)
};
ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr);
- if (ret == 1)
+ if (ret < 1)
pabort("can't send spi message");
for (ret = 0; ret < ARRAY_SIZE(tx); ret++) {
diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt
index 5effa5bd993..e213f45cf9d 100644
--- a/Documentation/stable_kernel_rules.txt
+++ b/Documentation/stable_kernel_rules.txt
@@ -18,16 +18,15 @@ Rules on what kind of patches are accepted, and which ones are not, into the
- It cannot contain any "trivial" fixes in it (spelling changes,
whitespace cleanups, etc).
- It must follow the Documentation/SubmittingPatches rules.
- - It or an equivalent fix must already exist in Linus' tree. Quote the
- respective commit ID in Linus' tree in your patch submission to -stable.
+ - It or an equivalent fix must already exist in Linus' tree (upstream).
Procedure for submitting patches to the -stable tree:
- Send the patch, after verifying that it follows the above rules, to
- stable@kernel.org.
- - To have the patch automatically included in the stable tree, add the
- the tag
+ stable@kernel.org. You must note the upstream commit ID in the changelog
+ of your submission.
+ - To have the patch automatically included in the stable tree, add the tag
Cc: stable@kernel.org
in the sign-off area. Once the patch is merged it will be applied to
the stable tree without anything else needing to be done by the author
diff --git a/Documentation/sysctl/net.txt b/Documentation/sysctl/net.txt
index df38ef046f8..cbd05ffc606 100644
--- a/Documentation/sysctl/net.txt
+++ b/Documentation/sysctl/net.txt
@@ -84,6 +84,16 @@ netdev_max_backlog
Maximum number of packets, queued on the INPUT side, when the interface
receives packets faster than kernel can process them.
+netdev_tstamp_prequeue
+----------------------
+
+If set to 0, RX packet timestamps can be sampled after RPS processing, when
+the target CPU processes packets. It might give some delay on timestamps, but
+permit to distribute the load on several cpus.
+
+If set to 1 (default), timestamps are sampled as soon as possible, before
+queueing.
+
optmem_max
----------
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index fc5790d36cd..b606c2c4dd3 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -19,6 +19,7 @@ files can be found in mm/swap.c.
Currently, these files are in /proc/sys/vm:
- block_dump
+- compact_memory
- dirty_background_bytes
- dirty_background_ratio
- dirty_bytes
@@ -26,6 +27,7 @@ Currently, these files are in /proc/sys/vm:
- dirty_ratio
- dirty_writeback_centisecs
- drop_caches
+- extfrag_threshold
- hugepages_treat_as_movable
- hugetlb_shm_group
- laptop_mode
@@ -64,6 +66,15 @@ information on block I/O debugging is in Documentation/laptops/laptop-mode.txt.
==============================================================
+compact_memory
+
+Available only when CONFIG_COMPACTION is set. When 1 is written to the file,
+all zones are compacted such that free memory is available in contiguous
+blocks where possible. This can be important for example in the allocation of
+huge pages although processes will also directly compact memory as required.
+
+==============================================================
+
dirty_background_bytes
Contains the amount of dirty memory at which the pdflush background writeback
@@ -139,6 +150,20 @@ user should run `sync' first.
==============================================================
+extfrag_threshold
+
+This parameter affects whether the kernel will compact memory or direct
+reclaim to satisfy a high-order allocation. /proc/extfrag_index shows what
+the fragmentation index for each order is in each zone in the system. Values
+tending towards 0 imply allocations would fail due to lack of memory,
+values towards 1000 imply failures are due to fragmentation and -1 implies
+that the allocation will succeed as long as watermarks are met.
+
+The kernel will not compact memory in a zone if the
+fragmentation index is <= extfrag_threshold. The default value is 500.
+
+==============================================================
+
hugepages_treat_as_movable
This parameter is only useful when kernelcore= is specified at boot time to
@@ -171,7 +196,7 @@ controlled by this knob are discussed in Documentation/laptops/laptop-mode.txt.
legacy_va_layout
-If non-zero, this sysctl disables the new 32-bit mmap mmap layout - the kernel
+If non-zero, this sysctl disables the new 32-bit mmap layout - the kernel
will use the legacy (2.4) layout for all processes.
==============================================================
@@ -486,7 +511,7 @@ information may not be desired.
If this is set to non-zero, this information is shown whenever the
OOM killer actually kills a memory-hogging task.
-The default value is 0.
+The default value is 1 (enabled).
==============================================================
@@ -573,11 +598,14 @@ Because other nodes' memory may be free. This means system total status
may be not fatal yet.
If this is set to 2, the kernel panics compulsorily even on the
-above-mentioned.
+above-mentioned. Even oom happens under memory cgroup, the whole
+system panics.
The default value is 0.
1 and 2 are for failover of clustering. Please select either
according to your policy of failover.
+panic_on_oom=2+kdump gives you very strong tool to investigate
+why oom happens. You can get snapshot.
=============================================================
diff --git a/Documentation/sysfs-rules.txt b/Documentation/sysfs-rules.txt
index 5d8bc2cd250..c1a1fd636bf 100644
--- a/Documentation/sysfs-rules.txt
+++ b/Documentation/sysfs-rules.txt
@@ -125,7 +125,7 @@ versions of the sysfs interface.
- Block
The converted block subsystem at /sys/class/block or
/sys/subsystem/block will contain the links for disks and partitions
- at the same level, never in a hierarchy. Assuming the block subsytem to
+ at the same level, never in a hierarchy. Assuming the block subsystem to
contain only disks and not partition devices in the same flat list is
a bug in the application.
diff --git a/Documentation/sysrq.txt b/Documentation/sysrq.txt
index d56a0177542..5c17196c8fe 100644
--- a/Documentation/sysrq.txt
+++ b/Documentation/sysrq.txt
@@ -177,13 +177,13 @@ virtual console (ALT+Fn) and then back again should also help.
* I hit SysRq, but nothing seems to happen, what's wrong?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-There are some keyboards that send different scancodes for SysRq than the
-pre-defined 0x54. So if SysRq doesn't work out of the box for a certain
-keyboard, run 'showkey -s' to find out the proper scancode sequence. Then
-use 'setkeycodes <sequence> 84' to define this sequence to the usual SysRq
-code (84 is decimal for 0x54). It's probably best to put this command in a
-boot script. Oh, and by the way, you exit 'showkey' by not typing anything
-for ten seconds.
+There are some keyboards that produce a different keycode for SysRq than the
+pre-defined value of 99 (see KEY_SYSRQ in include/linux/input.h), or which
+don't have a SysRq key at all. In these cases, run 'showkey -s' to find an
+appropriate scancode sequence, and use 'setkeycodes <sequence> 99' to map
+this sequence to the usual SysRq code (e.g., 'setkeycodes e05b 99'). It's
+probably best to put this command in a boot script. Oh, and by the way, you
+exit 'showkey' by not typing anything for ten seconds.
* I want to add SysRQ key events to a module, how does it work?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
diff --git a/Documentation/telephony/ixj.txt b/Documentation/telephony/ixj.txt
index 44d124005ba..4fb314d5170 100644
--- a/Documentation/telephony/ixj.txt
+++ b/Documentation/telephony/ixj.txt
@@ -108,14 +108,9 @@ applications.
1.4 Where to get things
-You can download the latest versions of the driver from:
-
-http://www.quicknet.net/develop.htm
-
-You can download the latest version of this document from:
-
-http://www.quicknet.net/develop.htm
+Info on latest versions of the driver are here:
+http://web.archive.org/web/*/http://www.quicknet.net/develop.htm
1.5 Mailing List
diff --git a/Documentation/timers/00-INDEX b/Documentation/timers/00-INDEX
index 397dc35e132..a9248da5cdb 100644
--- a/Documentation/timers/00-INDEX
+++ b/Documentation/timers/00-INDEX
@@ -4,6 +4,8 @@ highres.txt
- High resolution timers and dynamic ticks design notes
hpet.txt
- High Precision Event Timer Driver for Linux
+hpet_example.c
+ - sample hpet timer test program
hrtimers.txt
- subsystem for high-resolution kernel timers
timer_stats.txt
diff --git a/Documentation/timers/Makefile b/Documentation/timers/Makefile
new file mode 100644
index 00000000000..73f75f8a87d
--- /dev/null
+++ b/Documentation/timers/Makefile
@@ -0,0 +1,8 @@
+# kbuild trick to avoid linker error. Can be omitted if a module is built.
+obj- := dummy.o
+
+# List of programs to build
+hostprogs-$(CONFIG_X86) := hpet_example
+
+# Tell kbuild to always build the programs
+always := $(hostprogs-y)
diff --git a/Documentation/timers/hpet.txt b/Documentation/timers/hpet.txt
index 16d25e6b5a0..767392ffd31 100644
--- a/Documentation/timers/hpet.txt
+++ b/Documentation/timers/hpet.txt
@@ -26,274 +26,5 @@ initialization. An example of this initialization can be found in
arch/x86/kernel/hpet.c.
The driver provides a userspace API which resembles the API found in the
-RTC driver framework. An example user space program is provided below.
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <string.h>
-#include <memory.h>
-#include <malloc.h>
-#include <time.h>
-#include <ctype.h>
-#include <sys/types.h>
-#include <sys/wait.h>
-#include <signal.h>
-#include <fcntl.h>
-#include <errno.h>
-#include <sys/time.h>
-#include <linux/hpet.h>
-
-
-extern void hpet_open_close(int, const char **);
-extern void hpet_info(int, const char **);
-extern void hpet_poll(int, const char **);
-extern void hpet_fasync(int, const char **);
-extern void hpet_read(int, const char **);
-
-#include <sys/poll.h>
-#include <sys/ioctl.h>
-#include <signal.h>
-
-struct hpet_command {
- char *command;
- void (*func)(int argc, const char ** argv);
-} hpet_command[] = {
- {
- "open-close",
- hpet_open_close
- },
- {
- "info",
- hpet_info
- },
- {
- "poll",
- hpet_poll
- },
- {
- "fasync",
- hpet_fasync
- },
-};
-
-int
-main(int argc, const char ** argv)
-{
- int i;
-
- argc--;
- argv++;
-
- if (!argc) {
- fprintf(stderr, "-hpet: requires command\n");
- return -1;
- }
-
-
- for (i = 0; i < (sizeof (hpet_command) / sizeof (hpet_command[0])); i++)
- if (!strcmp(argv[0], hpet_command[i].command)) {
- argc--;
- argv++;
- fprintf(stderr, "-hpet: executing %s\n",
- hpet_command[i].command);
- hpet_command[i].func(argc, argv);
- return 0;
- }
-
- fprintf(stderr, "do_hpet: command %s not implemented\n", argv[0]);
-
- return -1;
-}
-
-void
-hpet_open_close(int argc, const char **argv)
-{
- int fd;
-
- if (argc != 1) {
- fprintf(stderr, "hpet_open_close: device-name\n");
- return;
- }
-
- fd = open(argv[0], O_RDONLY);
- if (fd < 0)
- fprintf(stderr, "hpet_open_close: open failed\n");
- else
- close(fd);
-
- return;
-}
-
-void
-hpet_info(int argc, const char **argv)
-{
-}
-
-void
-hpet_poll(int argc, const char **argv)
-{
- unsigned long freq;
- int iterations, i, fd;
- struct pollfd pfd;
- struct hpet_info info;
- struct timeval stv, etv;
- struct timezone tz;
- long usec;
-
- if (argc != 3) {
- fprintf(stderr, "hpet_poll: device-name freq iterations\n");
- return;
- }
-
- freq = atoi(argv[1]);
- iterations = atoi(argv[2]);
-
- fd = open(argv[0], O_RDONLY);
-
- if (fd < 0) {
- fprintf(stderr, "hpet_poll: open of %s failed\n", argv[0]);
- return;
- }
-
- if (ioctl(fd, HPET_IRQFREQ, freq) < 0) {
- fprintf(stderr, "hpet_poll: HPET_IRQFREQ failed\n");
- goto out;
- }
-
- if (ioctl(fd, HPET_INFO, &info) < 0) {
- fprintf(stderr, "hpet_poll: failed to get info\n");
- goto out;
- }
-
- fprintf(stderr, "hpet_poll: info.hi_flags 0x%lx\n", info.hi_flags);
-
- if (info.hi_flags && (ioctl(fd, HPET_EPI, 0) < 0)) {
- fprintf(stderr, "hpet_poll: HPET_EPI failed\n");
- goto out;
- }
-
- if (ioctl(fd, HPET_IE_ON, 0) < 0) {
- fprintf(stderr, "hpet_poll, HPET_IE_ON failed\n");
- goto out;
- }
-
- pfd.fd = fd;
- pfd.events = POLLIN;
-
- for (i = 0; i < iterations; i++) {
- pfd.revents = 0;
- gettimeofday(&stv, &tz);
- if (poll(&pfd, 1, -1) < 0)
- fprintf(stderr, "hpet_poll: poll failed\n");
- else {
- long data;
-
- gettimeofday(&etv, &tz);
- usec = stv.tv_sec * 1000000 + stv.tv_usec;
- usec = (etv.tv_sec * 1000000 + etv.tv_usec) - usec;
-
- fprintf(stderr,
- "hpet_poll: expired time = 0x%lx\n", usec);
-
- fprintf(stderr, "hpet_poll: revents = 0x%x\n",
- pfd.revents);
-
- if (read(fd, &data, sizeof(data)) != sizeof(data)) {
- fprintf(stderr, "hpet_poll: read failed\n");
- }
- else
- fprintf(stderr, "hpet_poll: data 0x%lx\n",
- data);
- }
- }
-
-out:
- close(fd);
- return;
-}
-
-static int hpet_sigio_count;
-
-static void
-hpet_sigio(int val)
-{
- fprintf(stderr, "hpet_sigio: called\n");
- hpet_sigio_count++;
-}
-
-void
-hpet_fasync(int argc, const char **argv)
-{
- unsigned long freq;
- int iterations, i, fd, value;
- sig_t oldsig;
- struct hpet_info info;
-
- hpet_sigio_count = 0;
- fd = -1;
-
- if ((oldsig = signal(SIGIO, hpet_sigio)) == SIG_ERR) {
- fprintf(stderr, "hpet_fasync: failed to set signal handler\n");
- return;
- }
-
- if (argc != 3) {
- fprintf(stderr, "hpet_fasync: device-name freq iterations\n");
- goto out;
- }
-
- fd = open(argv[0], O_RDONLY);
-
- if (fd < 0) {
- fprintf(stderr, "hpet_fasync: failed to open %s\n", argv[0]);
- return;
- }
-
-
- if ((fcntl(fd, F_SETOWN, getpid()) == 1) ||
- ((value = fcntl(fd, F_GETFL)) == 1) ||
- (fcntl(fd, F_SETFL, value | O_ASYNC) == 1)) {
- fprintf(stderr, "hpet_fasync: fcntl failed\n");
- goto out;
- }
-
- freq = atoi(argv[1]);
- iterations = atoi(argv[2]);
-
- if (ioctl(fd, HPET_IRQFREQ, freq) < 0) {
- fprintf(stderr, "hpet_fasync: HPET_IRQFREQ failed\n");
- goto out;
- }
-
- if (ioctl(fd, HPET_INFO, &info) < 0) {
- fprintf(stderr, "hpet_fasync: failed to get info\n");
- goto out;
- }
-
- fprintf(stderr, "hpet_fasync: info.hi_flags 0x%lx\n", info.hi_flags);
-
- if (info.hi_flags && (ioctl(fd, HPET_EPI, 0) < 0)) {
- fprintf(stderr, "hpet_fasync: HPET_EPI failed\n");
- goto out;
- }
-
- if (ioctl(fd, HPET_IE_ON, 0) < 0) {
- fprintf(stderr, "hpet_fasync, HPET_IE_ON failed\n");
- goto out;
- }
-
- for (i = 0; i < iterations; i++) {
- (void) pause();
- fprintf(stderr, "hpet_fasync: count = %d\n", hpet_sigio_count);
- }
-
-out:
- signal(SIGIO, oldsig);
-
- if (fd >= 0)
- close(fd);
-
- return;
-}
+RTC driver framework. An example user space program is provided in
+file:Documentation/timers/hpet_example.c
diff --git a/Documentation/timers/hpet_example.c b/Documentation/timers/hpet_example.c
new file mode 100644
index 00000000000..4bfafb7bc4c
--- /dev/null
+++ b/Documentation/timers/hpet_example.c
@@ -0,0 +1,267 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <string.h>
+#include <memory.h>
+#include <malloc.h>
+#include <time.h>
+#include <ctype.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <signal.h>
+#include <errno.h>
+#include <sys/time.h>
+#include <linux/hpet.h>
+
+
+extern void hpet_open_close(int, const char **);
+extern void hpet_info(int, const char **);
+extern void hpet_poll(int, const char **);
+extern void hpet_fasync(int, const char **);
+extern void hpet_read(int, const char **);
+
+#include <sys/poll.h>
+#include <sys/ioctl.h>
+
+struct hpet_command {
+ char *command;
+ void (*func)(int argc, const char ** argv);
+} hpet_command[] = {
+ {
+ "open-close",
+ hpet_open_close
+ },
+ {
+ "info",
+ hpet_info
+ },
+ {
+ "poll",
+ hpet_poll
+ },
+ {
+ "fasync",
+ hpet_fasync
+ },
+};
+
+int
+main(int argc, const char ** argv)
+{
+ int i;
+
+ argc--;
+ argv++;
+
+ if (!argc) {
+ fprintf(stderr, "-hpet: requires command\n");
+ return -1;
+ }
+
+
+ for (i = 0; i < (sizeof (hpet_command) / sizeof (hpet_command[0])); i++)
+ if (!strcmp(argv[0], hpet_command[i].command)) {
+ argc--;
+ argv++;
+ fprintf(stderr, "-hpet: executing %s\n",
+ hpet_command[i].command);
+ hpet_command[i].func(argc, argv);
+ return 0;
+ }
+
+ fprintf(stderr, "do_hpet: command %s not implemented\n", argv[0]);
+
+ return -1;
+}
+
+void
+hpet_open_close(int argc, const char **argv)
+{
+ int fd;
+
+ if (argc != 1) {
+ fprintf(stderr, "hpet_open_close: device-name\n");
+ return;
+ }
+
+ fd = open(argv[0], O_RDONLY);
+ if (fd < 0)
+ fprintf(stderr, "hpet_open_close: open failed\n");
+ else
+ close(fd);
+
+ return;
+}
+
+void
+hpet_info(int argc, const char **argv)
+{
+}
+
+void
+hpet_poll(int argc, const char **argv)
+{
+ unsigned long freq;
+ int iterations, i, fd;
+ struct pollfd pfd;
+ struct hpet_info info;
+ struct timeval stv, etv;
+ struct timezone tz;
+ long usec;
+
+ if (argc != 3) {
+ fprintf(stderr, "hpet_poll: device-name freq iterations\n");
+ return;
+ }
+
+ freq = atoi(argv[1]);
+ iterations = atoi(argv[2]);
+
+ fd = open(argv[0], O_RDONLY);
+
+ if (fd < 0) {
+ fprintf(stderr, "hpet_poll: open of %s failed\n", argv[0]);
+ return;
+ }
+
+ if (ioctl(fd, HPET_IRQFREQ, freq) < 0) {
+ fprintf(stderr, "hpet_poll: HPET_IRQFREQ failed\n");
+ goto out;
+ }
+
+ if (ioctl(fd, HPET_INFO, &info) < 0) {
+ fprintf(stderr, "hpet_poll: failed to get info\n");
+ goto out;
+ }
+
+ fprintf(stderr, "hpet_poll: info.hi_flags 0x%lx\n", info.hi_flags);
+
+ if (info.hi_flags && (ioctl(fd, HPET_EPI, 0) < 0)) {
+ fprintf(stderr, "hpet_poll: HPET_EPI failed\n");
+ goto out;
+ }
+
+ if (ioctl(fd, HPET_IE_ON, 0) < 0) {
+ fprintf(stderr, "hpet_poll, HPET_IE_ON failed\n");
+ goto out;
+ }
+
+ pfd.fd = fd;
+ pfd.events = POLLIN;
+
+ for (i = 0; i < iterations; i++) {
+ pfd.revents = 0;
+ gettimeofday(&stv, &tz);
+ if (poll(&pfd, 1, -1) < 0)
+ fprintf(stderr, "hpet_poll: poll failed\n");
+ else {
+ long data;
+
+ gettimeofday(&etv, &tz);
+ usec = stv.tv_sec * 1000000 + stv.tv_usec;
+ usec = (etv.tv_sec * 1000000 + etv.tv_usec) - usec;
+
+ fprintf(stderr,
+ "hpet_poll: expired time = 0x%lx\n", usec);
+
+ fprintf(stderr, "hpet_poll: revents = 0x%x\n",
+ pfd.revents);
+
+ if (read(fd, &data, sizeof(data)) != sizeof(data)) {
+ fprintf(stderr, "hpet_poll: read failed\n");
+ }
+ else
+ fprintf(stderr, "hpet_poll: data 0x%lx\n",
+ data);
+ }
+ }
+
+out:
+ close(fd);
+ return;
+}
+
+static int hpet_sigio_count;
+
+static void
+hpet_sigio(int val)
+{
+ fprintf(stderr, "hpet_sigio: called\n");
+ hpet_sigio_count++;
+}
+
+void
+hpet_fasync(int argc, const char **argv)
+{
+ unsigned long freq;
+ int iterations, i, fd, value;
+ sig_t oldsig;
+ struct hpet_info info;
+
+ hpet_sigio_count = 0;
+ fd = -1;
+
+ if ((oldsig = signal(SIGIO, hpet_sigio)) == SIG_ERR) {
+ fprintf(stderr, "hpet_fasync: failed to set signal handler\n");
+ return;
+ }
+
+ if (argc != 3) {
+ fprintf(stderr, "hpet_fasync: device-name freq iterations\n");
+ goto out;
+ }
+
+ fd = open(argv[0], O_RDONLY);
+
+ if (fd < 0) {
+ fprintf(stderr, "hpet_fasync: failed to open %s\n", argv[0]);
+ return;
+ }
+
+
+ if ((fcntl(fd, F_SETOWN, getpid()) == 1) ||
+ ((value = fcntl(fd, F_GETFL)) == 1) ||
+ (fcntl(fd, F_SETFL, value | O_ASYNC) == 1)) {
+ fprintf(stderr, "hpet_fasync: fcntl failed\n");
+ goto out;
+ }
+
+ freq = atoi(argv[1]);
+ iterations = atoi(argv[2]);
+
+ if (ioctl(fd, HPET_IRQFREQ, freq) < 0) {
+ fprintf(stderr, "hpet_fasync: HPET_IRQFREQ failed\n");
+ goto out;
+ }
+
+ if (ioctl(fd, HPET_INFO, &info) < 0) {
+ fprintf(stderr, "hpet_fasync: failed to get info\n");
+ goto out;
+ }
+
+ fprintf(stderr, "hpet_fasync: info.hi_flags 0x%lx\n", info.hi_flags);
+
+ if (info.hi_flags && (ioctl(fd, HPET_EPI, 0) < 0)) {
+ fprintf(stderr, "hpet_fasync: HPET_EPI failed\n");
+ goto out;
+ }
+
+ if (ioctl(fd, HPET_IE_ON, 0) < 0) {
+ fprintf(stderr, "hpet_fasync, HPET_IE_ON failed\n");
+ goto out;
+ }
+
+ for (i = 0; i < iterations; i++) {
+ (void) pause();
+ fprintf(stderr, "hpet_fasync: count = %d\n", hpet_sigio_count);
+ }
+
+out:
+ signal(SIGIO, oldsig);
+
+ if (fd >= 0)
+ close(fd);
+
+ return;
+}
diff --git a/Documentation/timers/timers-howto.txt b/Documentation/timers/timers-howto.txt
new file mode 100644
index 00000000000..c9ef29d2ede
--- /dev/null
+++ b/Documentation/timers/timers-howto.txt
@@ -0,0 +1,105 @@
+delays - Information on the various kernel delay / sleep mechanisms
+-------------------------------------------------------------------
+
+This document seeks to answer the common question: "What is the
+RightWay (TM) to insert a delay?"
+
+This question is most often faced by driver writers who have to
+deal with hardware delays and who may not be the most intimately
+familiar with the inner workings of the Linux Kernel.
+
+
+Inserting Delays
+----------------
+
+The first, and most important, question you need to ask is "Is my
+code in an atomic context?" This should be followed closely by "Does
+it really need to delay in atomic context?" If so...
+
+ATOMIC CONTEXT:
+ You must use the *delay family of functions. These
+ functions use the jiffie estimation of clock speed
+ and will busy wait for enough loop cycles to achieve
+ the desired delay:
+
+ ndelay(unsigned long nsecs)
+ udelay(unsigned long usecs)
+ mdelay(unsgined long msecs)
+
+ udelay is the generally preferred API; ndelay-level
+ precision may not actually exist on many non-PC devices.
+
+ mdelay is macro wrapper around udelay, to account for
+ possible overflow when passing large arguments to udelay.
+ In general, use of mdelay is discouraged and code should
+ be refactored to allow for the use of msleep.
+
+NON-ATOMIC CONTEXT:
+ You should use the *sleep[_range] family of functions.
+ There are a few more options here, while any of them may
+ work correctly, using the "right" sleep function will
+ help the scheduler, power management, and just make your
+ driver better :)
+
+ -- Backed by busy-wait loop:
+ udelay(unsigned long usecs)
+ -- Backed by hrtimers:
+ usleep_range(unsigned long min, unsigned long max)
+ -- Backed by jiffies / legacy_timers
+ msleep(unsigned long msecs)
+ msleep_interruptible(unsigned long msecs)
+
+ Unlike the *delay family, the underlying mechanism
+ driving each of these calls varies, thus there are
+ quirks you should be aware of.
+
+
+ SLEEPING FOR "A FEW" USECS ( < ~10us? ):
+ * Use udelay
+
+ - Why not usleep?
+ On slower systems, (embedded, OR perhaps a speed-
+ stepped PC!) the overhead of setting up the hrtimers
+ for usleep *may* not be worth it. Such an evaluation
+ will obviously depend on your specific situation, but
+ it is something to be aware of.
+
+ SLEEPING FOR ~USECS OR SMALL MSECS ( 10us - 20ms):
+ * Use usleep_range
+
+ - Why not msleep for (1ms - 20ms)?
+ Explained originally here:
+ http://lkml.org/lkml/2007/8/3/250
+ msleep(1~20) may not do what the caller intends, and
+ will often sleep longer (~20 ms actual sleep for any
+ value given in the 1~20ms range). In many cases this
+ is not the desired behavior.
+
+ - Why is there no "usleep" / What is a good range?
+ Since usleep_range is built on top of hrtimers, the
+ wakeup will be very precise (ish), thus a simple
+ usleep function would likely introduce a large number
+ of undesired interrupts.
+
+ With the introduction of a range, the scheduler is
+ free to coalesce your wakeup with any other wakeup
+ that may have happened for other reasons, or at the
+ worst case, fire an interrupt for your upper bound.
+
+ The larger a range you supply, the greater a chance
+ that you will not trigger an interrupt; this should
+ be balanced with what is an acceptable upper bound on
+ delay / performance for your specific code path. Exact
+ tolerances here are very situation specific, thus it
+ is left to the caller to determine a reasonable range.
+
+ SLEEPING FOR LARGER MSECS ( 10ms+ )
+ * Use msleep or possibly msleep_interruptible
+
+ - What's the difference?
+ msleep sets the current task to TASK_UNINTERRUPTIBLE
+ whereas msleep_interruptible sets the current task to
+ TASK_INTERRUPTIBLE before scheduling the sleep. In
+ short, the difference is whether the sleep can be ended
+ early by a signal. In general, just use msleep unless
+ you know you have a need for the interruptible variant.
diff --git a/Documentation/tomoyo.txt b/Documentation/tomoyo.txt
index b3a232cae7f..200a2d37cbc 100644
--- a/Documentation/tomoyo.txt
+++ b/Documentation/tomoyo.txt
@@ -3,8 +3,8 @@
TOMOYO is a name-based MAC extension (LSM module) for the Linux kernel.
LiveCD-based tutorials are available at
-http://tomoyo.sourceforge.jp/en/1.6.x/1st-step/ubuntu8.04-live/
-http://tomoyo.sourceforge.jp/en/1.6.x/1st-step/centos5-live/ .
+http://tomoyo.sourceforge.jp/1.7/1st-step/ubuntu10.04-live/
+http://tomoyo.sourceforge.jp/1.7/1st-step/centos5-live/ .
Though these tutorials use non-LSM version of TOMOYO, they are useful for you
to know what TOMOYO is.
@@ -13,12 +13,12 @@ to know what TOMOYO is.
Build the kernel with CONFIG_SECURITY_TOMOYO=y and pass "security=tomoyo" on
kernel's command line.
-Please see http://tomoyo.sourceforge.jp/en/2.2.x/ for details.
+Please see http://tomoyo.sourceforge.jp/2.3/ for details.
--- Where is documentation? ---
User <-> Kernel interface documentation is available at
-http://tomoyo.sourceforge.jp/en/2.2.x/policy-reference.html .
+http://tomoyo.sourceforge.jp/2.3/policy-reference.html .
Materials we prepared for seminars and symposiums are available at
http://sourceforge.jp/projects/tomoyo/docs/?category_id=532&language_id=1 .
@@ -50,6 +50,6 @@ multiple LSM modules at the same time. We feel sorry that you have to give up
SELinux/SMACK/AppArmor etc. when you want to use TOMOYO.
We hope that LSM becomes stackable in future. Meanwhile, you can use non-LSM
-version of TOMOYO, available at http://tomoyo.sourceforge.jp/en/1.6.x/ .
+version of TOMOYO, available at http://tomoyo.sourceforge.jp/1.7/ .
LSM version of TOMOYO is a subset of non-LSM version of TOMOYO. We are planning
to port non-LSM version's functionalities to LSM versions.
diff --git a/Documentation/trace/events.txt b/Documentation/trace/events.txt
index 02ac6ed38b2..09bd8e90298 100644
--- a/Documentation/trace/events.txt
+++ b/Documentation/trace/events.txt
@@ -90,7 +90,8 @@ In order to facilitate early boot debugging, use boot option:
trace_event=[event-list]
-The format of this boot option is the same as described in section 2.1.
+event-list is a comma separated list of events. See section 2.1 for event
+format.
3. Defining an event-enabled tracepoint
=======================================
@@ -238,7 +239,7 @@ subsystem's filter file.
For convenience, filters for every event in a subsystem can be set or
cleared as a group by writing a filter expression into the filter file
-at the root of the subsytem. Note however, that if a filter for any
+at the root of the subsystem. Note however, that if a filter for any
event within the subsystem lacks a field specified in the subsystem
filter, or if the filter can't be applied for any other reason, the
filter for that event will retain its previous setting. This can
@@ -250,7 +251,7 @@ fields can be guaranteed to propagate successfully to all events.
Here are a few subsystem filter examples that also illustrate the
above points:
-Clear the filters on all events in the sched subsytem:
+Clear the filters on all events in the sched subsystem:
# cd /sys/kernel/debug/tracing/events/sched
# echo 0 > filter
@@ -260,7 +261,7 @@ none
none
Set a filter using only common fields for all events in the sched
-subsytem (all events end up with the same filter):
+subsystem (all events end up with the same filter):
# cd /sys/kernel/debug/tracing/events/sched
# echo common_pid == 0 > filter
@@ -270,7 +271,7 @@ common_pid == 0
common_pid == 0
Attempt to set a filter using a non-common field for all events in the
-sched subsytem (all events but those that have a prev_pid field retain
+sched subsystem (all events but those that have a prev_pid field retain
their old filters):
# cd /sys/kernel/debug/tracing/events/sched
diff --git a/Documentation/trace/ftrace-design.txt b/Documentation/trace/ftrace-design.txt
index 239f14b2b55..dc52bd442c9 100644
--- a/Documentation/trace/ftrace-design.txt
+++ b/Documentation/trace/ftrace-design.txt
@@ -1,5 +1,6 @@
function tracer guts
====================
+ By Mike Frysinger
Introduction
------------
@@ -12,6 +13,9 @@ Note that this focuses on architecture implementation details only. If you
want more explanation of a feature in terms of common code, review the common
ftrace.txt file.
+Ideally, everyone who wishes to retain performance while supporting tracing in
+their kernel should make it all the way to dynamic ftrace support.
+
Prerequisites
-------------
@@ -173,14 +177,16 @@ void ftrace_graph_caller(void)
unsigned long *frompc = &...;
unsigned long selfpc = <return address> - MCOUNT_INSN_SIZE;
- prepare_ftrace_return(frompc, selfpc);
+ /* passing frame pointer up is optional -- see below */
+ prepare_ftrace_return(frompc, selfpc, frame_pointer);
/* restore all state needed by the ABI */
}
#endif
-For information on how to implement prepare_ftrace_return(), simply look at
-the x86 version. The only architecture-specific piece in it is the setup of
+For information on how to implement prepare_ftrace_return(), simply look at the
+x86 version (the frame pointer passing is optional; see the next section for
+more information). The only architecture-specific piece in it is the setup of
the fault recovery table (the asm(...) code). The rest should be the same
across architectures.
@@ -205,6 +211,23 @@ void return_to_handler(void)
#endif
+HAVE_FUNCTION_GRAPH_FP_TEST
+---------------------------
+
+An arch may pass in a unique value (frame pointer) to both the entering and
+exiting of a function. On exit, the value is compared and if it does not
+match, then it will panic the kernel. This is largely a sanity check for bad
+code generation with gcc. If gcc for your port sanely updates the frame
+pointer under different optimization levels, then ignore this option.
+
+However, adding support for it isn't terribly difficult. In your assembly code
+that calls prepare_ftrace_return(), pass the frame pointer as the 3rd argument.
+Then in the C version of that function, do what the x86 port does and pass it
+along to ftrace_push_return_trace() instead of a stub value of 0.
+
+Similarly, when you call ftrace_return_to_handler(), pass it the frame pointer.
+
+
HAVE_FTRACE_NMI_ENTER
---------------------
@@ -214,15 +237,14 @@ If you can't trace NMI functions, then skip this option.
HAVE_SYSCALL_TRACEPOINTS
----------------------
+------------------------
You need very few things to get the syscalls tracing in an arch.
+- Support HAVE_ARCH_TRACEHOOK (see arch/Kconfig).
- Have a NR_syscalls variable in <asm/unistd.h> that provides the number
of syscalls supported by the arch.
-- Implement arch_syscall_addr() that resolves a syscall address from a
- syscall number.
-- Support the TIF_SYSCALL_TRACEPOINT thread flags
+- Support the TIF_SYSCALL_TRACEPOINT thread flags.
- Put the trace_sys_enter() and trace_sys_exit() tracepoints calls from ptrace
in the ptrace syscalls tracing path.
- Tag this arch as HAVE_SYSCALL_TRACEPOINTS.
@@ -231,12 +253,152 @@ You need very few things to get the syscalls tracing in an arch.
HAVE_FTRACE_MCOUNT_RECORD
-------------------------
-See scripts/recordmcount.pl for more info.
+See scripts/recordmcount.pl for more info. Just fill in the arch-specific
+details for how to locate the addresses of mcount call sites via objdump.
+This option doesn't make much sense without also implementing dynamic ftrace.
+
+HAVE_DYNAMIC_FTRACE
+-------------------
+
+You will first need HAVE_FTRACE_MCOUNT_RECORD and HAVE_FUNCTION_TRACER, so
+scroll your reader back up if you got over eager.
+
+Once those are out of the way, you will need to implement:
+ - asm/ftrace.h:
+ - MCOUNT_ADDR
+ - ftrace_call_adjust()
+ - struct dyn_arch_ftrace{}
+ - asm code:
+ - mcount() (new stub)
+ - ftrace_caller()
+ - ftrace_call()
+ - ftrace_stub()
+ - C code:
+ - ftrace_dyn_arch_init()
+ - ftrace_make_nop()
+ - ftrace_make_call()
+ - ftrace_update_ftrace_func()
+
+First you will need to fill out some arch details in your asm/ftrace.h.
+
+Define MCOUNT_ADDR as the address of your mcount symbol similar to:
+ #define MCOUNT_ADDR ((unsigned long)mcount)
+Since no one else will have a decl for that function, you will need to:
+ extern void mcount(void);
+
+You will also need the helper function ftrace_call_adjust(). Most people
+will be able to stub it out like so:
+ static inline unsigned long ftrace_call_adjust(unsigned long addr)
+ {
+ return addr;
+ }
<details to be filled>
+Lastly you will need the custom dyn_arch_ftrace structure. If you need
+some extra state when runtime patching arbitrary call sites, this is the
+place. For now though, create an empty struct:
+ struct dyn_arch_ftrace {
+ /* No extra data needed */
+ };
+
+With the header out of the way, we can fill out the assembly code. While we
+did already create a mcount() function earlier, dynamic ftrace only wants a
+stub function. This is because the mcount() will only be used during boot
+and then all references to it will be patched out never to return. Instead,
+the guts of the old mcount() will be used to create a new ftrace_caller()
+function. Because the two are hard to merge, it will most likely be a lot
+easier to have two separate definitions split up by #ifdefs. Same goes for
+the ftrace_stub() as that will now be inlined in ftrace_caller().
+
+Before we get confused anymore, let's check out some pseudo code so you can
+implement your own stuff in assembly:
-HAVE_DYNAMIC_FTRACE
----------------------
+void mcount(void)
+{
+ return;
+}
+
+void ftrace_caller(void)
+{
+ /* implement HAVE_FUNCTION_TRACE_MCOUNT_TEST if you desire */
+
+ /* save all state needed by the ABI (see paragraph above) */
+
+ unsigned long frompc = ...;
+ unsigned long selfpc = <return address> - MCOUNT_INSN_SIZE;
+
+ftrace_call:
+ ftrace_stub(frompc, selfpc);
+
+ /* restore all state needed by the ABI */
+
+ftrace_stub:
+ return;
+}
+
+This might look a little odd at first, but keep in mind that we will be runtime
+patching multiple things. First, only functions that we actually want to trace
+will be patched to call ftrace_caller(). Second, since we only have one tracer
+active at a time, we will patch the ftrace_caller() function itself to call the
+specific tracer in question. That is the point of the ftrace_call label.
+
+With that in mind, let's move on to the C code that will actually be doing the
+runtime patching. You'll need a little knowledge of your arch's opcodes in
+order to make it through the next section.
+
+Every arch has an init callback function. If you need to do something early on
+to initialize some state, this is the time to do that. Otherwise, this simple
+function below should be sufficient for most people:
+
+int __init ftrace_dyn_arch_init(void *data)
+{
+ /* return value is done indirectly via data */
+ *(unsigned long *)data = 0;
+
+ return 0;
+}
+
+There are two functions that are used to do runtime patching of arbitrary
+functions. The first is used to turn the mcount call site into a nop (which
+is what helps us retain runtime performance when not tracing). The second is
+used to turn the mcount call site into a call to an arbitrary location (but
+typically that is ftracer_caller()). See the general function definition in
+linux/ftrace.h for the functions:
+ ftrace_make_nop()
+ ftrace_make_call()
+The rec->ip value is the address of the mcount call site that was collected
+by the scripts/recordmcount.pl during build time.
+
+The last function is used to do runtime patching of the active tracer. This
+will be modifying the assembly code at the location of the ftrace_call symbol
+inside of the ftrace_caller() function. So you should have sufficient padding
+at that location to support the new function calls you'll be inserting. Some
+people will be using a "call" type instruction while others will be using a
+"branch" type instruction. Specifically, the function is:
+ ftrace_update_ftrace_func()
+
+
+HAVE_DYNAMIC_FTRACE + HAVE_FUNCTION_GRAPH_TRACER
+------------------------------------------------
+
+The function grapher needs a few tweaks in order to work with dynamic ftrace.
+Basically, you will need to:
+ - update:
+ - ftrace_caller()
+ - ftrace_graph_call()
+ - ftrace_graph_caller()
+ - implement:
+ - ftrace_enable_ftrace_graph_caller()
+ - ftrace_disable_ftrace_graph_caller()
<details to be filled>
+Quick notes:
+ - add a nop stub after the ftrace_call location named ftrace_graph_call;
+ stub needs to be large enough to support a call to ftrace_graph_caller()
+ - update ftrace_graph_caller() to work with being called by the new
+ ftrace_caller() since some semantics may have changed
+ - ftrace_enable_ftrace_graph_caller() will runtime patch the
+ ftrace_graph_call location with a call to ftrace_graph_caller()
+ - ftrace_disable_ftrace_graph_caller() will runtime patch the
+ ftrace_graph_call location with nops
diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt
index 8179692fbb9..557c1edecca 100644
--- a/Documentation/trace/ftrace.txt
+++ b/Documentation/trace/ftrace.txt
@@ -155,6 +155,9 @@ of ftrace. Here is a list of some of the key files:
to be traced. Echoing names of functions into this file
will limit the trace to only those functions.
+ This interface also allows for commands to be used. See the
+ "Filter commands" section for more details.
+
set_ftrace_notrace:
This has an effect opposite to that of
@@ -1337,12 +1340,14 @@ ftrace_dump_on_oops must be set. To set ftrace_dump_on_oops, one
can either use the sysctl function or set it via the proc system
interface.
- sysctl kernel.ftrace_dump_on_oops=1
+ sysctl kernel.ftrace_dump_on_oops=n
or
- echo 1 > /proc/sys/kernel/ftrace_dump_on_oops
+ echo n > /proc/sys/kernel/ftrace_dump_on_oops
+If n = 1, ftrace will dump buffers of all CPUs, if n = 2 ftrace will
+only dump the buffer of the CPU that triggered the oops.
Here's an example of such a dump after a null pointer
dereference in a kernel module:
@@ -1588,7 +1593,7 @@ module author does not need to worry about it.
When tracing is enabled, kstop_machine is called to prevent
races with the CPUS executing code being modified (which can
-cause the CPU to do undesireable things), and the nops are
+cause the CPU to do undesirable things), and the nops are
patched back to calls. But this time, they do not call mcount
(which is just a function stub). They now call into the ftrace
infrastructure.
@@ -1625,7 +1630,7 @@ If I am only interested in sys_nanosleep and hrtimer_interrupt:
# echo sys_nanosleep hrtimer_interrupt \
> set_ftrace_filter
- # echo ftrace > current_tracer
+ # echo function > current_tracer
# echo 1 > tracing_enabled
# usleep 1
# echo 0 > tracing_enabled
@@ -1822,6 +1827,47 @@ this special filter via:
echo > set_graph_function
+Filter commands
+---------------
+
+A few commands are supported by the set_ftrace_filter interface.
+Trace commands have the following format:
+
+<function>:<command>:<parameter>
+
+The following commands are supported:
+
+- mod
+ This command enables function filtering per module. The
+ parameter defines the module. For example, if only the write*
+ functions in the ext3 module are desired, run:
+
+ echo 'write*:mod:ext3' > set_ftrace_filter
+
+ This command interacts with the filter in the same way as
+ filtering based on function names. Thus, adding more functions
+ in a different module is accomplished by appending (>>) to the
+ filter file. Remove specific module functions by prepending
+ '!':
+
+ echo '!writeback*:mod:ext3' >> set_ftrace_filter
+
+- traceon/traceoff
+ These commands turn tracing on and off when the specified
+ functions are hit. The parameter determines how many times the
+ tracing system is turned on and off. If unspecified, there is
+ no limit. For example, to disable tracing when a schedule bug
+ is hit the first 5 times, run:
+
+ echo '__schedule_bug:traceoff:5' > set_ftrace_filter
+
+ These commands are cumulative whether or not they are appended
+ to set_ftrace_filter. To remove a command, prepend it by '!'
+ and drop the parameter:
+
+ echo '!__schedule_bug:traceoff' > set_ftrace_filter
+
+
trace_pipe
----------
diff --git a/Documentation/trace/kmemtrace.txt b/Documentation/trace/kmemtrace.txt
deleted file mode 100644
index 6308735e58c..00000000000
--- a/Documentation/trace/kmemtrace.txt
+++ /dev/null
@@ -1,126 +0,0 @@
- kmemtrace - Kernel Memory Tracer
-
- by Eduard - Gabriel Munteanu
- <eduard.munteanu@linux360.ro>
-
-I. Introduction
-===============
-
-kmemtrace helps kernel developers figure out two things:
-1) how different allocators (SLAB, SLUB etc.) perform
-2) how kernel code allocates memory and how much
-
-To do this, we trace every allocation and export information to the userspace
-through the relay interface. We export things such as the number of requested
-bytes, the number of bytes actually allocated (i.e. including internal
-fragmentation), whether this is a slab allocation or a plain kmalloc() and so
-on.
-
-The actual analysis is performed by a userspace tool (see section III for
-details on where to get it from). It logs the data exported by the kernel,
-processes it and (as of writing this) can provide the following information:
-- the total amount of memory allocated and fragmentation per call-site
-- the amount of memory allocated and fragmentation per allocation
-- total memory allocated and fragmentation in the collected dataset
-- number of cross-CPU allocation and frees (makes sense in NUMA environments)
-
-Moreover, it can potentially find inconsistent and erroneous behavior in
-kernel code, such as using slab free functions on kmalloc'ed memory or
-allocating less memory than requested (but not truly failed allocations).
-
-kmemtrace also makes provisions for tracing on some arch and analysing the
-data on another.
-
-II. Design and goals
-====================
-
-kmemtrace was designed to handle rather large amounts of data. Thus, it uses
-the relay interface to export whatever is logged to userspace, which then
-stores it. Analysis and reporting is done asynchronously, that is, after the
-data is collected and stored. By design, it allows one to log and analyse
-on different machines and different arches.
-
-As of writing this, the ABI is not considered stable, though it might not
-change much. However, no guarantees are made about compatibility yet. When
-deemed stable, the ABI should still allow easy extension while maintaining
-backward compatibility. This is described further in Documentation/ABI.
-
-Summary of design goals:
- - allow logging and analysis to be done across different machines
- - be fast and anticipate usage in high-load environments (*)
- - be reasonably extensible
- - make it possible for GNU/Linux distributions to have kmemtrace
- included in their repositories
-
-(*) - one of the reasons Pekka Enberg's original userspace data analysis
- tool's code was rewritten from Perl to C (although this is more than a
- simple conversion)
-
-
-III. Quick usage guide
-======================
-
-1) Get a kernel that supports kmemtrace and build it accordingly (i.e. enable
-CONFIG_KMEMTRACE).
-
-2) Get the userspace tool and build it:
-$ git clone git://repo.or.cz/kmemtrace-user.git # current repository
-$ cd kmemtrace-user/
-$ ./autogen.sh
-$ ./configure
-$ make
-
-3) Boot the kmemtrace-enabled kernel if you haven't, preferably in the
-'single' runlevel (so that relay buffers don't fill up easily), and run
-kmemtrace:
-# '$' does not mean user, but root here.
-$ mount -t debugfs none /sys/kernel/debug
-$ mount -t proc none /proc
-$ cd path/to/kmemtrace-user/
-$ ./kmemtraced
-Wait a bit, then stop it with CTRL+C.
-$ cat /sys/kernel/debug/kmemtrace/total_overruns # Check if we didn't
- # overrun, should
- # be zero.
-$ (Optionally) [Run kmemtrace_check separately on each cpu[0-9]*.out file to
- check its correctness]
-$ ./kmemtrace-report
-
-Now you should have a nice and short summary of how the allocator performs.
-
-IV. FAQ and known issues
-========================
-
-Q: 'cat /sys/kernel/debug/kmemtrace/total_overruns' is non-zero, how do I fix
-this? Should I worry?
-A: If it's non-zero, this affects kmemtrace's accuracy, depending on how
-large the number is. You can fix it by supplying a higher
-'kmemtrace.subbufs=N' kernel parameter.
----
-
-Q: kmemtrace_check reports errors, how do I fix this? Should I worry?
-A: This is a bug and should be reported. It can occur for a variety of
-reasons:
- - possible bugs in relay code
- - possible misuse of relay by kmemtrace
- - timestamps being collected unorderly
-Or you may fix it yourself and send us a patch.
----
-
-Q: kmemtrace_report shows many errors, how do I fix this? Should I worry?
-A: This is a known issue and I'm working on it. These might be true errors
-in kernel code, which may have inconsistent behavior (e.g. allocating memory
-with kmem_cache_alloc() and freeing it with kfree()). Pekka Enberg pointed
-out this behavior may work with SLAB, but may fail with other allocators.
-
-It may also be due to lack of tracing in some unusual allocator functions.
-
-We don't want bug reports regarding this issue yet.
----
-
-V. See also
-===========
-
-Documentation/kernel-parameters.txt
-Documentation/ABI/testing/debugfs-kmemtrace
-
diff --git a/Documentation/trace/kprobetrace.txt b/Documentation/trace/kprobetrace.txt
index 47aabeebbdf..5f77d94598d 100644
--- a/Documentation/trace/kprobetrace.txt
+++ b/Documentation/trace/kprobetrace.txt
@@ -24,6 +24,7 @@ Synopsis of kprobe_events
-------------------------
p[:[GRP/]EVENT] SYMBOL[+offs]|MEMADDR [FETCHARGS] : Set a probe
r[:[GRP/]EVENT] SYMBOL[+0] [FETCHARGS] : Set a return probe
+ -:[GRP/]EVENT : Clear a probe
GRP : Group name. If omitted, use "kprobes" for it.
EVENT : Event name. If omitted, the event name is generated
@@ -37,15 +38,14 @@ Synopsis of kprobe_events
@SYM[+|-offs] : Fetch memory at SYM +|- offs (SYM should be a data symbol)
$stackN : Fetch Nth entry of stack (N >= 0)
$stack : Fetch stack address.
- $argN : Fetch function argument. (N >= 0)(*)
- $retval : Fetch return value.(**)
- +|-offs(FETCHARG) : Fetch memory at FETCHARG +|- offs address.(***)
- NAME=FETCHARG: Set NAME as the argument name of FETCHARG.
+ $retval : Fetch return value.(*)
+ +|-offs(FETCHARG) : Fetch memory at FETCHARG +|- offs address.(**)
+ NAME=FETCHARG : Set NAME as the argument name of FETCHARG.
+ FETCHARG:TYPE : Set TYPE as the type of FETCHARG. Currently, basic types
+ (u8/u16/u32/u64/s8/s16/s32/s64) and string are supported.
- (*) aN may not correct on asmlinkaged functions and at the middle of
- function body.
- (**) only for return probe.
- (***) this is useful for fetching a field of data structures.
+ (*) only for return probe.
+ (**) this is useful for fetching a field of data structures.
Per-Probe Event Filtering
@@ -82,13 +82,16 @@ Usage examples
To add a probe as a new event, write a new definition to kprobe_events
as below.
- echo p:myprobe do_sys_open dfd=$arg0 filename=$arg1 flags=$arg2 mode=$arg3 > /sys/kernel/debug/tracing/kprobe_events
+ echo 'p:myprobe do_sys_open dfd=%ax filename=%dx flags=%cx mode=+4($stack)' > /sys/kernel/debug/tracing/kprobe_events
This sets a kprobe on the top of do_sys_open() function with recording
-1st to 4th arguments as "myprobe" event. As this example shows, users can
-choose more familiar names for each arguments.
+1st to 4th arguments as "myprobe" event. Note, which register/stack entry is
+assigned to each function argument depends on arch-specific ABI. If you unsure
+the ABI, please try to use probe subcommand of perf-tools (you can find it
+under tools/perf/).
+As this example shows, users can choose more familiar names for each arguments.
- echo r:myretprobe do_sys_open $retval >> /sys/kernel/debug/tracing/kprobe_events
+ echo 'r:myretprobe do_sys_open $retval' >> /sys/kernel/debug/tracing/kprobe_events
This sets a kretprobe on the return point of do_sys_open() function with
recording return value as "myretprobe" event.
@@ -97,23 +100,24 @@ recording return value as "myretprobe" event.
cat /sys/kernel/debug/tracing/events/kprobes/myprobe/format
name: myprobe
-ID: 75
+ID: 780
format:
- field:unsigned short common_type; offset:0; size:2;
- field:unsigned char common_flags; offset:2; size:1;
- field:unsigned char common_preempt_count; offset:3; size:1;
- field:int common_pid; offset:4; size:4;
- field:int common_tgid; offset:8; size:4;
+ field:unsigned short common_type; offset:0; size:2; signed:0;
+ field:unsigned char common_flags; offset:2; size:1; signed:0;
+ field:unsigned char common_preempt_count; offset:3; size:1;signed:0;
+ field:int common_pid; offset:4; size:4; signed:1;
+ field:int common_lock_depth; offset:8; size:4; signed:1;
- field: unsigned long ip; offset:16;tsize:8;
- field: int nargs; offset:24;tsize:4;
- field: unsigned long dfd; offset:32;tsize:8;
- field: unsigned long filename; offset:40;tsize:8;
- field: unsigned long flags; offset:48;tsize:8;
- field: unsigned long mode; offset:56;tsize:8;
+ field:unsigned long __probe_ip; offset:12; size:4; signed:0;
+ field:int __probe_nargs; offset:16; size:4; signed:1;
+ field:unsigned long dfd; offset:20; size:4; signed:0;
+ field:unsigned long filename; offset:24; size:4; signed:0;
+ field:unsigned long flags; offset:28; size:4; signed:0;
+ field:unsigned long mode; offset:32; size:4; signed:0;
-print fmt: "(%lx) dfd=%lx filename=%lx flags=%lx mode=%lx", REC->ip, REC->dfd, REC->filename, REC->flags, REC->mode
+print fmt: "(%lx) dfd=%lx filename=%lx flags=%lx mode=%lx", REC->__probe_ip,
+REC->dfd, REC->filename, REC->flags, REC->mode
You can see that the event has 4 arguments as in the expressions you specified.
@@ -121,6 +125,12 @@ print fmt: "(%lx) dfd=%lx filename=%lx flags=%lx mode=%lx", REC->ip, REC->dfd, R
This clears all probe points.
+ Or,
+
+ echo -:myprobe >> kprobe_events
+
+ This clears probe points selectively.
+
Right after definition, each event is disabled by default. For tracing these
events, you need to enable it.
@@ -146,4 +156,3 @@ events, you need to enable it.
returns from SYMBOL(e.g. "sys_open+0x1b/0x1d <- do_sys_open" means kernel
returns from do_sys_open to sys_open+0x1b).
-
diff --git a/Documentation/trace/postprocess/trace-vmscan-postprocess.pl b/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
new file mode 100644
index 00000000000..1b55146d1c8
--- /dev/null
+++ b/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
@@ -0,0 +1,686 @@
+#!/usr/bin/perl
+# This is a POC for reading the text representation of trace output related to
+# page reclaim. It makes an attempt to extract some high-level information on
+# what is going on. The accuracy of the parser may vary
+#
+# Example usage: trace-vmscan-postprocess.pl < /sys/kernel/debug/tracing/trace_pipe
+# other options
+# --read-procstat If the trace lacks process info, get it from /proc
+# --ignore-pid Aggregate processes of the same name together
+#
+# Copyright (c) IBM Corporation 2009
+# Author: Mel Gorman <mel@csn.ul.ie>
+use strict;
+use Getopt::Long;
+
+# Tracepoint events
+use constant MM_VMSCAN_DIRECT_RECLAIM_BEGIN => 1;
+use constant MM_VMSCAN_DIRECT_RECLAIM_END => 2;
+use constant MM_VMSCAN_KSWAPD_WAKE => 3;
+use constant MM_VMSCAN_KSWAPD_SLEEP => 4;
+use constant MM_VMSCAN_LRU_SHRINK_ACTIVE => 5;
+use constant MM_VMSCAN_LRU_SHRINK_INACTIVE => 6;
+use constant MM_VMSCAN_LRU_ISOLATE => 7;
+use constant MM_VMSCAN_WRITEPAGE_FILE_SYNC => 8;
+use constant MM_VMSCAN_WRITEPAGE_ANON_SYNC => 9;
+use constant MM_VMSCAN_WRITEPAGE_FILE_ASYNC => 10;
+use constant MM_VMSCAN_WRITEPAGE_ANON_ASYNC => 11;
+use constant MM_VMSCAN_WRITEPAGE_ASYNC => 12;
+use constant EVENT_UNKNOWN => 13;
+
+# Per-order events
+use constant MM_VMSCAN_DIRECT_RECLAIM_BEGIN_PERORDER => 11;
+use constant MM_VMSCAN_WAKEUP_KSWAPD_PERORDER => 12;
+use constant MM_VMSCAN_KSWAPD_WAKE_PERORDER => 13;
+use constant HIGH_KSWAPD_REWAKEUP_PERORDER => 14;
+
+# Constants used to track state
+use constant STATE_DIRECT_BEGIN => 15;
+use constant STATE_DIRECT_ORDER => 16;
+use constant STATE_KSWAPD_BEGIN => 17;
+use constant STATE_KSWAPD_ORDER => 18;
+
+# High-level events extrapolated from tracepoints
+use constant HIGH_DIRECT_RECLAIM_LATENCY => 19;
+use constant HIGH_KSWAPD_LATENCY => 20;
+use constant HIGH_KSWAPD_REWAKEUP => 21;
+use constant HIGH_NR_SCANNED => 22;
+use constant HIGH_NR_TAKEN => 23;
+use constant HIGH_NR_RECLAIM => 24;
+use constant HIGH_NR_CONTIG_DIRTY => 25;
+
+my %perprocesspid;
+my %perprocess;
+my %last_procmap;
+my $opt_ignorepid;
+my $opt_read_procstat;
+
+my $total_wakeup_kswapd;
+my ($total_direct_reclaim, $total_direct_nr_scanned);
+my ($total_direct_latency, $total_kswapd_latency);
+my ($total_direct_writepage_file_sync, $total_direct_writepage_file_async);
+my ($total_direct_writepage_anon_sync, $total_direct_writepage_anon_async);
+my ($total_kswapd_nr_scanned, $total_kswapd_wake);
+my ($total_kswapd_writepage_file_sync, $total_kswapd_writepage_file_async);
+my ($total_kswapd_writepage_anon_sync, $total_kswapd_writepage_anon_async);
+
+# Catch sigint and exit on request
+my $sigint_report = 0;
+my $sigint_exit = 0;
+my $sigint_pending = 0;
+my $sigint_received = 0;
+sub sigint_handler {
+ my $current_time = time;
+ if ($current_time - 2 > $sigint_received) {
+ print "SIGINT received, report pending. Hit ctrl-c again to exit\n";
+ $sigint_report = 1;
+ } else {
+ if (!$sigint_exit) {
+ print "Second SIGINT received quickly, exiting\n";
+ }
+ $sigint_exit++;
+ }
+
+ if ($sigint_exit > 3) {
+ print "Many SIGINTs received, exiting now without report\n";
+ exit;
+ }
+
+ $sigint_received = $current_time;
+ $sigint_pending = 1;
+}
+$SIG{INT} = "sigint_handler";
+
+# Parse command line options
+GetOptions(
+ 'ignore-pid' => \$opt_ignorepid,
+ 'read-procstat' => \$opt_read_procstat,
+);
+
+# Defaults for dynamically discovered regex's
+my $regex_direct_begin_default = 'order=([0-9]*) may_writepage=([0-9]*) gfp_flags=([A-Z_|]*)';
+my $regex_direct_end_default = 'nr_reclaimed=([0-9]*)';
+my $regex_kswapd_wake_default = 'nid=([0-9]*) order=([0-9]*)';
+my $regex_kswapd_sleep_default = 'nid=([0-9]*)';
+my $regex_wakeup_kswapd_default = 'nid=([0-9]*) zid=([0-9]*) order=([0-9]*)';
+my $regex_lru_isolate_default = 'isolate_mode=([0-9]*) order=([0-9]*) nr_requested=([0-9]*) nr_scanned=([0-9]*) nr_taken=([0-9]*) contig_taken=([0-9]*) contig_dirty=([0-9]*) contig_failed=([0-9]*)';
+my $regex_lru_shrink_inactive_default = 'lru=([A-Z_]*) nr_scanned=([0-9]*) nr_reclaimed=([0-9]*) priority=([0-9]*)';
+my $regex_lru_shrink_active_default = 'lru=([A-Z_]*) nr_scanned=([0-9]*) nr_rotated=([0-9]*) priority=([0-9]*)';
+my $regex_writepage_default = 'page=([0-9a-f]*) pfn=([0-9]*) flags=([A-Z_|]*)';
+
+# Dyanically discovered regex
+my $regex_direct_begin;
+my $regex_direct_end;
+my $regex_kswapd_wake;
+my $regex_kswapd_sleep;
+my $regex_wakeup_kswapd;
+my $regex_lru_isolate;
+my $regex_lru_shrink_inactive;
+my $regex_lru_shrink_active;
+my $regex_writepage;
+
+# Static regex used. Specified like this for readability and for use with /o
+# (process_pid) (cpus ) ( time ) (tpoint ) (details)
+my $regex_traceevent = '\s*([a-zA-Z0-9-]*)\s*(\[[0-9]*\])\s*([0-9.]*):\s*([a-zA-Z_]*):\s*(.*)';
+my $regex_statname = '[-0-9]*\s\((.*)\).*';
+my $regex_statppid = '[-0-9]*\s\(.*\)\s[A-Za-z]\s([0-9]*).*';
+
+sub generate_traceevent_regex {
+ my $event = shift;
+ my $default = shift;
+ my $regex;
+
+ # Read the event format or use the default
+ if (!open (FORMAT, "/sys/kernel/debug/tracing/events/$event/format")) {
+ print("WARNING: Event $event format string not found\n");
+ return $default;
+ } else {
+ my $line;
+ while (!eof(FORMAT)) {
+ $line = <FORMAT>;
+ $line =~ s/, REC->.*//;
+ if ($line =~ /^print fmt:\s"(.*)".*/) {
+ $regex = $1;
+ $regex =~ s/%s/\([0-9a-zA-Z|_]*\)/g;
+ $regex =~ s/%p/\([0-9a-f]*\)/g;
+ $regex =~ s/%d/\([-0-9]*\)/g;
+ $regex =~ s/%ld/\([-0-9]*\)/g;
+ $regex =~ s/%lu/\([0-9]*\)/g;
+ }
+ }
+ }
+
+ # Can't handle the print_flags stuff but in the context of this
+ # script, it really doesn't matter
+ $regex =~ s/\(REC.*\) \? __print_flags.*//;
+
+ # Verify fields are in the right order
+ my $tuple;
+ foreach $tuple (split /\s/, $regex) {
+ my ($key, $value) = split(/=/, $tuple);
+ my $expected = shift;
+ if ($key ne $expected) {
+ print("WARNING: Format not as expected for event $event '$key' != '$expected'\n");
+ $regex =~ s/$key=\((.*)\)/$key=$1/;
+ }
+ }
+
+ if (defined shift) {
+ die("Fewer fields than expected in format");
+ }
+
+ return $regex;
+}
+
+$regex_direct_begin = generate_traceevent_regex(
+ "vmscan/mm_vmscan_direct_reclaim_begin",
+ $regex_direct_begin_default,
+ "order", "may_writepage",
+ "gfp_flags");
+$regex_direct_end = generate_traceevent_regex(
+ "vmscan/mm_vmscan_direct_reclaim_end",
+ $regex_direct_end_default,
+ "nr_reclaimed");
+$regex_kswapd_wake = generate_traceevent_regex(
+ "vmscan/mm_vmscan_kswapd_wake",
+ $regex_kswapd_wake_default,
+ "nid", "order");
+$regex_kswapd_sleep = generate_traceevent_regex(
+ "vmscan/mm_vmscan_kswapd_sleep",
+ $regex_kswapd_sleep_default,
+ "nid");
+$regex_wakeup_kswapd = generate_traceevent_regex(
+ "vmscan/mm_vmscan_wakeup_kswapd",
+ $regex_wakeup_kswapd_default,
+ "nid", "zid", "order");
+$regex_lru_isolate = generate_traceevent_regex(
+ "vmscan/mm_vmscan_lru_isolate",
+ $regex_lru_isolate_default,
+ "isolate_mode", "order",
+ "nr_requested", "nr_scanned", "nr_taken",
+ "contig_taken", "contig_dirty", "contig_failed");
+$regex_lru_shrink_inactive = generate_traceevent_regex(
+ "vmscan/mm_vmscan_lru_shrink_inactive",
+ $regex_lru_shrink_inactive_default,
+ "nid", "zid",
+ "lru",
+ "nr_scanned", "nr_reclaimed", "priority");
+$regex_lru_shrink_active = generate_traceevent_regex(
+ "vmscan/mm_vmscan_lru_shrink_active",
+ $regex_lru_shrink_active_default,
+ "nid", "zid",
+ "lru",
+ "nr_scanned", "nr_rotated", "priority");
+$regex_writepage = generate_traceevent_regex(
+ "vmscan/mm_vmscan_writepage",
+ $regex_writepage_default,
+ "page", "pfn", "flags");
+
+sub read_statline($) {
+ my $pid = $_[0];
+ my $statline;
+
+ if (open(STAT, "/proc/$pid/stat")) {
+ $statline = <STAT>;
+ close(STAT);
+ }
+
+ if ($statline eq '') {
+ $statline = "-1 (UNKNOWN_PROCESS_NAME) R 0";
+ }
+
+ return $statline;
+}
+
+sub guess_process_pid($$) {
+ my $pid = $_[0];
+ my $statline = $_[1];
+
+ if ($pid == 0) {
+ return "swapper-0";
+ }
+
+ if ($statline !~ /$regex_statname/o) {
+ die("Failed to math stat line for process name :: $statline");
+ }
+ return "$1-$pid";
+}
+
+# Convert sec.usec timestamp format
+sub timestamp_to_ms($) {
+ my $timestamp = $_[0];
+
+ my ($sec, $usec) = split (/\./, $timestamp);
+ return ($sec * 1000) + ($usec / 1000);
+}
+
+sub process_events {
+ my $traceevent;
+ my $process_pid;
+ my $cpus;
+ my $timestamp;
+ my $tracepoint;
+ my $details;
+ my $statline;
+
+ # Read each line of the event log
+EVENT_PROCESS:
+ while ($traceevent = <STDIN>) {
+ if ($traceevent =~ /$regex_traceevent/o) {
+ $process_pid = $1;
+ $timestamp = $3;
+ $tracepoint = $4;
+
+ $process_pid =~ /(.*)-([0-9]*)$/;
+ my $process = $1;
+ my $pid = $2;
+
+ if ($process eq "") {
+ $process = $last_procmap{$pid};
+ $process_pid = "$process-$pid";
+ }
+ $last_procmap{$pid} = $process;
+
+ if ($opt_read_procstat) {
+ $statline = read_statline($pid);
+ if ($opt_read_procstat && $process eq '') {
+ $process_pid = guess_process_pid($pid, $statline);
+ }
+ }
+ } else {
+ next;
+ }
+
+ # Perl Switch() sucks majorly
+ if ($tracepoint eq "mm_vmscan_direct_reclaim_begin") {
+ $timestamp = timestamp_to_ms($timestamp);
+ $perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN}++;
+ $perprocesspid{$process_pid}->{STATE_DIRECT_BEGIN} = $timestamp;
+
+ $details = $5;
+ if ($details !~ /$regex_direct_begin/o) {
+ print "WARNING: Failed to parse mm_vmscan_direct_reclaim_begin as expected\n";
+ print " $details\n";
+ print " $regex_direct_begin\n";
+ next;
+ }
+ my $order = $1;
+ $perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN_PERORDER}[$order]++;
+ $perprocesspid{$process_pid}->{STATE_DIRECT_ORDER} = $order;
+ } elsif ($tracepoint eq "mm_vmscan_direct_reclaim_end") {
+ # Count the event itself
+ my $index = $perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_END};
+ $perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_END}++;
+
+ # Record how long direct reclaim took this time
+ if (defined $perprocesspid{$process_pid}->{STATE_DIRECT_BEGIN}) {
+ $timestamp = timestamp_to_ms($timestamp);
+ my $order = $perprocesspid{$process_pid}->{STATE_DIRECT_ORDER};
+ my $latency = ($timestamp - $perprocesspid{$process_pid}->{STATE_DIRECT_BEGIN});
+ $perprocesspid{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index] = "$order-$latency";
+ }
+ } elsif ($tracepoint eq "mm_vmscan_kswapd_wake") {
+ $details = $5;
+ if ($details !~ /$regex_kswapd_wake/o) {
+ print "WARNING: Failed to parse mm_vmscan_kswapd_wake as expected\n";
+ print " $details\n";
+ print " $regex_kswapd_wake\n";
+ next;
+ }
+
+ my $order = $2;
+ $perprocesspid{$process_pid}->{STATE_KSWAPD_ORDER} = $order;
+ if (!$perprocesspid{$process_pid}->{STATE_KSWAPD_BEGIN}) {
+ $timestamp = timestamp_to_ms($timestamp);
+ $perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE}++;
+ $perprocesspid{$process_pid}->{STATE_KSWAPD_BEGIN} = $timestamp;
+ $perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE_PERORDER}[$order]++;
+ } else {
+ $perprocesspid{$process_pid}->{HIGH_KSWAPD_REWAKEUP}++;
+ $perprocesspid{$process_pid}->{HIGH_KSWAPD_REWAKEUP_PERORDER}[$order]++;
+ }
+ } elsif ($tracepoint eq "mm_vmscan_kswapd_sleep") {
+
+ # Count the event itself
+ my $index = $perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_SLEEP};
+ $perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_SLEEP}++;
+
+ # Record how long kswapd was awake
+ $timestamp = timestamp_to_ms($timestamp);
+ my $order = $perprocesspid{$process_pid}->{STATE_KSWAPD_ORDER};
+ my $latency = ($timestamp - $perprocesspid{$process_pid}->{STATE_KSWAPD_BEGIN});
+ $perprocesspid{$process_pid}->{HIGH_KSWAPD_LATENCY}[$index] = "$order-$latency";
+ $perprocesspid{$process_pid}->{STATE_KSWAPD_BEGIN} = 0;
+ } elsif ($tracepoint eq "mm_vmscan_wakeup_kswapd") {
+ $perprocesspid{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD}++;
+
+ $details = $5;
+ if ($details !~ /$regex_wakeup_kswapd/o) {
+ print "WARNING: Failed to parse mm_vmscan_wakeup_kswapd as expected\n";
+ print " $details\n";
+ print " $regex_wakeup_kswapd\n";
+ next;
+ }
+ my $order = $3;
+ $perprocesspid{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD_PERORDER}[$order]++;
+ } elsif ($tracepoint eq "mm_vmscan_lru_isolate") {
+ $details = $5;
+ if ($details !~ /$regex_lru_isolate/o) {
+ print "WARNING: Failed to parse mm_vmscan_lru_isolate as expected\n";
+ print " $details\n";
+ print " $regex_lru_isolate/o\n";
+ next;
+ }
+ my $nr_scanned = $4;
+ my $nr_contig_dirty = $7;
+ $perprocesspid{$process_pid}->{HIGH_NR_SCANNED} += $nr_scanned;
+ $perprocesspid{$process_pid}->{HIGH_NR_CONTIG_DIRTY} += $nr_contig_dirty;
+ } elsif ($tracepoint eq "mm_vmscan_writepage") {
+ $details = $5;
+ if ($details !~ /$regex_writepage/o) {
+ print "WARNING: Failed to parse mm_vmscan_writepage as expected\n";
+ print " $details\n";
+ print " $regex_writepage\n";
+ next;
+ }
+
+ my $flags = $3;
+ my $file = 0;
+ my $sync_io = 0;
+ if ($flags =~ /RECLAIM_WB_FILE/) {
+ $file = 1;
+ }
+ if ($flags =~ /RECLAIM_WB_SYNC/) {
+ $sync_io = 1;
+ }
+ if ($sync_io) {
+ if ($file) {
+ $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC}++;
+ } else {
+ $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC}++;
+ }
+ } else {
+ if ($file) {
+ $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC}++;
+ } else {
+ $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC}++;
+ }
+ }
+ } else {
+ $perprocesspid{$process_pid}->{EVENT_UNKNOWN}++;
+ }
+
+ if ($sigint_pending) {
+ last EVENT_PROCESS;
+ }
+ }
+}
+
+sub dump_stats {
+ my $hashref = shift;
+ my %stats = %$hashref;
+
+ # Dump per-process stats
+ my $process_pid;
+ my $max_strlen = 0;
+
+ # Get the maximum process name
+ foreach $process_pid (keys %perprocesspid) {
+ my $len = length($process_pid);
+ if ($len > $max_strlen) {
+ $max_strlen = $len;
+ }
+ }
+ $max_strlen += 2;
+
+ # Work out latencies
+ printf("\n") if !$opt_ignorepid;
+ printf("Reclaim latencies expressed as order-latency_in_ms\n") if !$opt_ignorepid;
+ foreach $process_pid (keys %stats) {
+
+ if (!$stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[0] &&
+ !$stats{$process_pid}->{HIGH_KSWAPD_LATENCY}[0]) {
+ next;
+ }
+
+ printf "%-" . $max_strlen . "s ", $process_pid if !$opt_ignorepid;
+ my $index = 0;
+ while (defined $stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index] ||
+ defined $stats{$process_pid}->{HIGH_KSWAPD_LATENCY}[$index]) {
+
+ if ($stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index]) {
+ printf("%s ", $stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index]) if !$opt_ignorepid;
+ my ($dummy, $latency) = split(/-/, $stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index]);
+ $total_direct_latency += $latency;
+ } else {
+ printf("%s ", $stats{$process_pid}->{HIGH_KSWAPD_LATENCY}[$index]) if !$opt_ignorepid;
+ my ($dummy, $latency) = split(/-/, $stats{$process_pid}->{HIGH_KSWAPD_LATENCY}[$index]);
+ $total_kswapd_latency += $latency;
+ }
+ $index++;
+ }
+ print "\n" if !$opt_ignorepid;
+ }
+
+ # Print out process activity
+ printf("\n");
+ printf("%-" . $max_strlen . "s %8s %10s %8s %8s %8s %8s %8s\n", "Process", "Direct", "Wokeup", "Pages", "Pages", "Pages", "Time");
+ printf("%-" . $max_strlen . "s %8s %10s %8s %8s %8s %8s %8s\n", "details", "Rclms", "Kswapd", "Scanned", "Sync-IO", "ASync-IO", "Stalled");
+ foreach $process_pid (keys %stats) {
+
+ if (!$stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN}) {
+ next;
+ }
+
+ $total_direct_reclaim += $stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN};
+ $total_wakeup_kswapd += $stats{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD};
+ $total_direct_nr_scanned += $stats{$process_pid}->{HIGH_NR_SCANNED};
+ $total_direct_writepage_file_sync += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC};
+ $total_direct_writepage_anon_sync += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC};
+ $total_direct_writepage_file_async += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC};
+
+ $total_direct_writepage_anon_async += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC};
+
+ my $index = 0;
+ my $this_reclaim_delay = 0;
+ while (defined $stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index]) {
+ my ($dummy, $latency) = split(/-/, $stats{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$index]);
+ $this_reclaim_delay += $latency;
+ $index++;
+ }
+
+ printf("%-" . $max_strlen . "s %8d %10d %8u %8u %8u %8.3f",
+ $process_pid,
+ $stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN},
+ $stats{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD},
+ $stats{$process_pid}->{HIGH_NR_SCANNED},
+ $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC} + $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC},
+ $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC} + $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC},
+ $this_reclaim_delay / 1000);
+
+ if ($stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN}) {
+ print " ";
+ for (my $order = 0; $order < 20; $order++) {
+ my $count = $stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN_PERORDER}[$order];
+ if ($count != 0) {
+ print "direct-$order=$count ";
+ }
+ }
+ }
+ if ($stats{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD}) {
+ print " ";
+ for (my $order = 0; $order < 20; $order++) {
+ my $count = $stats{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD_PERORDER}[$order];
+ if ($count != 0) {
+ print "wakeup-$order=$count ";
+ }
+ }
+ }
+ if ($stats{$process_pid}->{HIGH_NR_CONTIG_DIRTY}) {
+ print " ";
+ my $count = $stats{$process_pid}->{HIGH_NR_CONTIG_DIRTY};
+ if ($count != 0) {
+ print "contig-dirty=$count ";
+ }
+ }
+
+ print "\n";
+ }
+
+ # Print out kswapd activity
+ printf("\n");
+ printf("%-" . $max_strlen . "s %8s %10s %8s %8s %8s %8s\n", "Kswapd", "Kswapd", "Order", "Pages", "Pages", "Pages");
+ printf("%-" . $max_strlen . "s %8s %10s %8s %8s %8s %8s\n", "Instance", "Wakeups", "Re-wakeup", "Scanned", "Sync-IO", "ASync-IO");
+ foreach $process_pid (keys %stats) {
+
+ if (!$stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE}) {
+ next;
+ }
+
+ $total_kswapd_wake += $stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE};
+ $total_kswapd_nr_scanned += $stats{$process_pid}->{HIGH_NR_SCANNED};
+ $total_kswapd_writepage_file_sync += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC};
+ $total_kswapd_writepage_anon_sync += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC};
+ $total_kswapd_writepage_file_async += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC};
+ $total_kswapd_writepage_anon_async += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC};
+
+ printf("%-" . $max_strlen . "s %8d %10d %8u %8i %8u",
+ $process_pid,
+ $stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE},
+ $stats{$process_pid}->{HIGH_KSWAPD_REWAKEUP},
+ $stats{$process_pid}->{HIGH_NR_SCANNED},
+ $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC} + $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC},
+ $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC} + $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC});
+
+ if ($stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE}) {
+ print " ";
+ for (my $order = 0; $order < 20; $order++) {
+ my $count = $stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE_PERORDER}[$order];
+ if ($count != 0) {
+ print "wake-$order=$count ";
+ }
+ }
+ }
+ if ($stats{$process_pid}->{HIGH_KSWAPD_REWAKEUP}) {
+ print " ";
+ for (my $order = 0; $order < 20; $order++) {
+ my $count = $stats{$process_pid}->{HIGH_KSWAPD_REWAKEUP_PERORDER}[$order];
+ if ($count != 0) {
+ print "rewake-$order=$count ";
+ }
+ }
+ }
+ printf("\n");
+ }
+
+ # Print out summaries
+ $total_direct_latency /= 1000;
+ $total_kswapd_latency /= 1000;
+ print "\nSummary\n";
+ print "Direct reclaims: $total_direct_reclaim\n";
+ print "Direct reclaim pages scanned: $total_direct_nr_scanned\n";
+ print "Direct reclaim write file sync I/O: $total_direct_writepage_file_sync\n";
+ print "Direct reclaim write anon sync I/O: $total_direct_writepage_anon_sync\n";
+ print "Direct reclaim write file async I/O: $total_direct_writepage_file_async\n";
+ print "Direct reclaim write anon async I/O: $total_direct_writepage_anon_async\n";
+ print "Wake kswapd requests: $total_wakeup_kswapd\n";
+ printf "Time stalled direct reclaim: %-1.2f seconds\n", $total_direct_latency;
+ print "\n";
+ print "Kswapd wakeups: $total_kswapd_wake\n";
+ print "Kswapd pages scanned: $total_kswapd_nr_scanned\n";
+ print "Kswapd reclaim write file sync I/O: $total_kswapd_writepage_file_sync\n";
+ print "Kswapd reclaim write anon sync I/O: $total_kswapd_writepage_anon_sync\n";
+ print "Kswapd reclaim write file async I/O: $total_kswapd_writepage_file_async\n";
+ print "Kswapd reclaim write anon async I/O: $total_kswapd_writepage_anon_async\n";
+ printf "Time kswapd awake: %-1.2f seconds\n", $total_kswapd_latency;
+}
+
+sub aggregate_perprocesspid() {
+ my $process_pid;
+ my $process;
+ undef %perprocess;
+
+ foreach $process_pid (keys %perprocesspid) {
+ $process = $process_pid;
+ $process =~ s/-([0-9])*$//;
+ if ($process eq '') {
+ $process = "NO_PROCESS_NAME";
+ }
+
+ $perprocess{$process}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN} += $perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN};
+ $perprocess{$process}->{MM_VMSCAN_KSWAPD_WAKE} += $perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE};
+ $perprocess{$process}->{MM_VMSCAN_WAKEUP_KSWAPD} += $perprocesspid{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD};
+ $perprocess{$process}->{HIGH_KSWAPD_REWAKEUP} += $perprocesspid{$process_pid}->{HIGH_KSWAPD_REWAKEUP};
+ $perprocess{$process}->{HIGH_NR_SCANNED} += $perprocesspid{$process_pid}->{HIGH_NR_SCANNED};
+ $perprocess{$process}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC} += $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC};
+ $perprocess{$process}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC} += $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC};
+ $perprocess{$process}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC} += $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC};
+ $perprocess{$process}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC} += $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC};
+
+ for (my $order = 0; $order < 20; $order++) {
+ $perprocess{$process}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN_PERORDER}[$order] += $perprocesspid{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN_PERORDER}[$order];
+ $perprocess{$process}->{MM_VMSCAN_WAKEUP_KSWAPD_PERORDER}[$order] += $perprocesspid{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD_PERORDER}[$order];
+ $perprocess{$process}->{MM_VMSCAN_KSWAPD_WAKE_PERORDER}[$order] += $perprocesspid{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE_PERORDER}[$order];
+
+ }
+
+ # Aggregate direct reclaim latencies
+ my $wr_index = $perprocess{$process}->{MM_VMSCAN_DIRECT_RECLAIM_END};
+ my $rd_index = 0;
+ while (defined $perprocesspid{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$rd_index]) {
+ $perprocess{$process}->{HIGH_DIRECT_RECLAIM_LATENCY}[$wr_index] = $perprocesspid{$process_pid}->{HIGH_DIRECT_RECLAIM_LATENCY}[$rd_index];
+ $rd_index++;
+ $wr_index++;
+ }
+ $perprocess{$process}->{MM_VMSCAN_DIRECT_RECLAIM_END} = $wr_index;
+
+ # Aggregate kswapd latencies
+ my $wr_index = $perprocess{$process}->{MM_VMSCAN_KSWAPD_SLEEP};
+ my $rd_index = 0;
+ while (defined $perprocesspid{$process_pid}->{HIGH_KSWAPD_LATENCY}[$rd_index]) {
+ $perprocess{$process}->{HIGH_KSWAPD_LATENCY}[$wr_index] = $perprocesspid{$process_pid}->{HIGH_KSWAPD_LATENCY}[$rd_index];
+ $rd_index++;
+ $wr_index++;
+ }
+ $perprocess{$process}->{MM_VMSCAN_DIRECT_RECLAIM_END} = $wr_index;
+ }
+}
+
+sub report() {
+ if (!$opt_ignorepid) {
+ dump_stats(\%perprocesspid);
+ } else {
+ aggregate_perprocesspid();
+ dump_stats(\%perprocess);
+ }
+}
+
+# Process events or signals until neither is available
+sub signal_loop() {
+ my $sigint_processed;
+ do {
+ $sigint_processed = 0;
+ process_events();
+
+ # Handle pending signals if any
+ if ($sigint_pending) {
+ my $current_time = time;
+
+ if ($sigint_exit) {
+ print "Received exit signal\n";
+ $sigint_pending = 0;
+ }
+ if ($sigint_report) {
+ if ($current_time >= $sigint_received + 2) {
+ report();
+ $sigint_report = 0;
+ $sigint_pending = 0;
+ $sigint_processed = 1;
+ }
+ }
+ }
+ } while ($sigint_pending || $sigint_processed);
+}
+
+signal_loop();
+report();
diff --git a/Documentation/uml/UserModeLinux-HOWTO.txt b/Documentation/uml/UserModeLinux-HOWTO.txt
index 628013f944c..9b7e1904db1 100644
--- a/Documentation/uml/UserModeLinux-HOWTO.txt
+++ b/Documentation/uml/UserModeLinux-HOWTO.txt
@@ -8,62 +8,6 @@
Table of Contents
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1. Introduction
1.1 How is User Mode Linux Different?
@@ -277,8 +221,7 @@
1. Download the latest UML patch from
- the download page <http://user-mode-linux.sourceforge.net/dl-
- sf.html>
+ the download page <http://user-mode-linux.sourceforge.net/
In this example, the file is uml-patch-2.4.0-prerelease.bz2.
@@ -438,7 +381,7 @@
as modules, especially filesystems and network protocols and filters,
so most symbols which need to be exported probably already are.
However, if you do find symbols that need exporting, let us
- <http://user-mode-linux.sourceforge.net/contacts.html> know, and
+ <http://user-mode-linux.sourceforge.net/> know, and
they'll be "taken care of".
@@ -498,8 +441,8 @@
You will need a filesystem to boot UML from. There are a number
available for download from here <http://user-mode-
- linux.sourceforge.net/dl-sf.html> . There are also several tools
- <http://user-mode-linux.sourceforge.net/fs_making.html> which can be
+ linux.sourceforge.net/> . There are also several tools
+ <http://user-mode-linux.sourceforge.net/> which can be
used to generate UML-compatible filesystem images from media.
The kernel will boot up and present you with a login prompt.
@@ -1236,7 +1179,7 @@
Harald's original README is here <http://user-mode-linux.source-
- forge.net/text/mcast.txt> and explains these in detail, as well as
+ forge.net/> and explains these in detail, as well as
some other issues.
@@ -1311,7 +1254,7 @@
kernel.
These were pointed out by Tim Robinson <timro at trkr dot net> in
- <http://www.geocrawler.com/lists/3/SourceForge/597/0/> name="this uml-
+ <http://www.geocrawler.com/> name="this uml-
user post"> .
@@ -2038,7 +1981,7 @@
uml_moo is installed with the UML deb and RPM. If you didn't install
UML from one of those packages, you can also get it from the UML
- utilities <http://user-mode-linux.sourceforge.net/dl-sf.html#UML
+ utilities <http://user-mode-linux.sourceforge.net/
utilities> tar file in tools/moo.
@@ -4599,7 +4542,7 @@
Michael Jennings <mikejen at hevanet.com> sent in some material which
is now gracing the top of the index page <http://user-mode-
- linux.sourceforge.net/index.html> of this site.
+ linux.sourceforge.net/> of this site.
SGI <http://www.sgi.com> (and more specifically Ralf Baechle <ralf at
uni-koblenz.de> ) gave me an account on oss.sgi.com
diff --git a/Documentation/usb/WUSB-Design-overview.txt b/Documentation/usb/WUSB-Design-overview.txt
index c480e9c32db..4c5e3793934 100644
--- a/Documentation/usb/WUSB-Design-overview.txt
+++ b/Documentation/usb/WUSB-Design-overview.txt
@@ -381,7 +381,7 @@ descriptor that gives us the status of the transfer, its identification
we issue another URB to read into the destination buffer the chunk of
data coming out of the remote endpoint. Done, wait for the next guy. The
callbacks for the URBs issued from here are the ones that will declare
-the xfer complete at some point and call it's callback.
+the xfer complete at some point and call its callback.
Seems simple, but the implementation is not trivial.
diff --git a/Documentation/usb/bulk-streams.txt b/Documentation/usb/bulk-streams.txt
new file mode 100644
index 00000000000..ffc02021863
--- /dev/null
+++ b/Documentation/usb/bulk-streams.txt
@@ -0,0 +1,78 @@
+Background
+==========
+
+Bulk endpoint streams were added in the USB 3.0 specification. Streams allow a
+device driver to overload a bulk endpoint so that multiple transfers can be
+queued at once.
+
+Streams are defined in sections 4.4.6.4 and 8.12.1.4 of the Universal Serial Bus
+3.0 specification at http://www.usb.org/developers/docs/ The USB Attached SCSI
+Protocol, which uses streams to queue multiple SCSI commands, can be found on
+the T10 website (http://t10.org/).
+
+
+Device-side implications
+========================
+
+Once a buffer has been queued to a stream ring, the device is notified (through
+an out-of-band mechanism on another endpoint) that data is ready for that stream
+ID. The device then tells the host which "stream" it wants to start. The host
+can also initiate a transfer on a stream without the device asking, but the
+device can refuse that transfer. Devices can switch between streams at any
+time.
+
+
+Driver implications
+===================
+
+int usb_alloc_streams(struct usb_interface *interface,
+ struct usb_host_endpoint **eps, unsigned int num_eps,
+ unsigned int num_streams, gfp_t mem_flags);
+
+Device drivers will call this API to request that the host controller driver
+allocate memory so the driver can use up to num_streams stream IDs. They must
+pass an array of usb_host_endpoints that need to be setup with similar stream
+IDs. This is to ensure that a UASP driver will be able to use the same stream
+ID for the bulk IN and OUT endpoints used in a Bi-directional command sequence.
+
+The return value is an error condition (if one of the endpoints doesn't support
+streams, or the xHCI driver ran out of memory), or the number of streams the
+host controller allocated for this endpoint. The xHCI host controller hardware
+declares how many stream IDs it can support, and each bulk endpoint on a
+SuperSpeed device will say how many stream IDs it can handle. Therefore,
+drivers should be able to deal with being allocated less stream IDs than they
+requested.
+
+Do NOT call this function if you have URBs enqueued for any of the endpoints
+passed in as arguments. Do not call this function to request less than two
+streams.
+
+Drivers will only be allowed to call this API once for the same endpoint
+without calling usb_free_streams(). This is a simplification for the xHCI host
+controller driver, and may change in the future.
+
+
+Picking new Stream IDs to use
+============================
+
+Stream ID 0 is reserved, and should not be used to communicate with devices. If
+usb_alloc_streams() returns with a value of N, you may use streams 1 though N.
+To queue an URB for a specific stream, set the urb->stream_id value. If the
+endpoint does not support streams, an error will be returned.
+
+Note that new API to choose the next stream ID will have to be added if the xHCI
+driver supports secondary stream IDs.
+
+
+Clean up
+========
+
+If a driver wishes to stop using streams to communicate with the device, it
+should call
+
+void usb_free_streams(struct usb_interface *interface,
+ struct usb_host_endpoint **eps, unsigned int num_eps,
+ gfp_t mem_flags);
+
+All stream IDs will be deallocated when the driver releases the interface, to
+ensure that drivers that don't support streams will be able to use the endpoint.
diff --git a/Documentation/usb/dma.txt b/Documentation/usb/dma.txt
index cfdcd16e3ab..84ef865237d 100644
--- a/Documentation/usb/dma.txt
+++ b/Documentation/usb/dma.txt
@@ -16,11 +16,11 @@ OR: they can now be DMA-aware.
manage dma mappings for existing dma-ready buffers (see below).
- URBs have an additional "transfer_dma" field, as well as a transfer_flags
- bit saying if it's valid. (Control requests also have "setup_dma" and a
- corresponding transfer_flags bit.)
+ bit saying if it's valid. (Control requests also have "setup_dma", but
+ drivers must not use it.)
-- "usbcore" will map those DMA addresses, if a DMA-aware driver didn't do
- it first and set URB_NO_TRANSFER_DMA_MAP or URB_NO_SETUP_DMA_MAP. HCDs
+- "usbcore" will map this DMA address, if a DMA-aware driver didn't do
+ it first and set URB_NO_TRANSFER_DMA_MAP. HCDs
don't manage dma mappings for URBs.
- There's a new "generic DMA API", parts of which are usable by USB device
@@ -43,22 +43,16 @@ and effects like cache-trashing can impose subtle penalties.
kind of addresses to store in urb->transfer_buffer and urb->transfer_dma.
You'd also set URB_NO_TRANSFER_DMA_MAP in urb->transfer_flags:
- void *usb_buffer_alloc (struct usb_device *dev, size_t size,
+ void *usb_alloc_coherent (struct usb_device *dev, size_t size,
int mem_flags, dma_addr_t *dma);
- void usb_buffer_free (struct usb_device *dev, size_t size,
+ void usb_free_coherent (struct usb_device *dev, size_t size,
void *addr, dma_addr_t dma);
Most drivers should *NOT* be using these primitives; they don't need
to use this type of memory ("dma-coherent"), and memory returned from
kmalloc() will work just fine.
- For control transfers you can use the buffer primitives or not for each
- of the transfer buffer and setup buffer independently. Set the flag bits
- URB_NO_TRANSFER_DMA_MAP and URB_NO_SETUP_DMA_MAP to indicate which
- buffers you have prepared. For non-control transfers URB_NO_SETUP_DMA_MAP
- is ignored.
-
The memory buffer returned is "dma-coherent"; sometimes you might need to
force a consistent memory access ordering by using memory barriers. It's
not using a streaming DMA mapping, so it's good for small transfers on
@@ -130,8 +124,8 @@ of Documentation/PCI/PCI-DMA-mapping.txt, titled "What memory is DMA-able?")
void usb_buffer_unmap (struct urb *urb);
The calls manage urb->transfer_dma for you, and set URB_NO_TRANSFER_DMA_MAP
- so that usbcore won't map or unmap the buffer. The same goes for
- urb->setup_dma and URB_NO_SETUP_DMA_MAP for control requests.
+ so that usbcore won't map or unmap the buffer. They cannot be used for
+ setup_packet buffers in control requests.
Note that several of those interfaces are currently commented out, since
they don't have current users. See the source code. Other than the dmasync
diff --git a/Documentation/usb/ehci.txt b/Documentation/usb/ehci.txt
index 1536b7e7513..9dcafa7d930 100644
--- a/Documentation/usb/ehci.txt
+++ b/Documentation/usb/ehci.txt
@@ -9,7 +9,7 @@ compatible with the USB 1.1 standard. It defines three transfer speeds:
- "Low Speed" 1.5 Mbit/sec
USB 1.1 only addressed full speed and low speed. High speed devices
-can be used on USB 1.1 systems, but they slow down to USB 1.1 speeds.
+can be used on USB 1.1 systems, but they slow down to USB 1.1 speeds.
USB 1.1 devices may also be used on USB 2.0 systems. When plugged
into an EHCI controller, they are given to a USB 1.1 "companion"
diff --git a/Documentation/usb/error-codes.txt b/Documentation/usb/error-codes.txt
index 9cf83e8c27b..d83703ea74b 100644
--- a/Documentation/usb/error-codes.txt
+++ b/Documentation/usb/error-codes.txt
@@ -41,8 +41,8 @@ USB-specific:
-EFBIG Host controller driver can't schedule that many ISO frames.
--EPIPE Specified endpoint is stalled. For non-control endpoints,
- reset this status with usb_clear_halt().
+-EPIPE The pipe type specified in the URB doesn't match the
+ endpoint's actual type.
-EMSGSIZE (a) endpoint maxpacket size is zero; it is not usable
in the current interface altsetting.
@@ -60,6 +60,8 @@ USB-specific:
-EHOSTUNREACH URB was rejected because the device is suspended.
+-ENOEXEC A control URB doesn't contain a Setup packet.
+
**************************************************************************
* Error codes returned by in urb->status *
diff --git a/Documentation/usb/gadget_hid.txt b/Documentation/usb/gadget_hid.txt
new file mode 100644
index 00000000000..f4a51f56742
--- /dev/null
+++ b/Documentation/usb/gadget_hid.txt
@@ -0,0 +1,445 @@
+
+ Linux USB HID gadget driver
+
+Introduction
+
+ The HID Gadget driver provides emulation of USB Human Interface
+ Devices (HID). The basic HID handling is done in the kernel,
+ and HID reports can be sent/received through I/O on the
+ /dev/hidgX character devices.
+
+ For more details about HID, see the developer page on
+ http://www.usb.org/developers/hidpage/
+
+Configuration
+
+ g_hid is a platform driver, so to use it you need to add
+ struct platform_device(s) to your platform code defining the
+ HID function descriptors you want to use - E.G. something
+ like:
+
+#include <linux/platform_device.h>
+#include <linux/usb/g_hid.h>
+
+/* hid descriptor for a keyboard */
+static struct hidg_func_descriptor my_hid_data = {
+ .subclass = 0, /* No subclass */
+ .protocol = 1, /* Keyboard */
+ .report_length = 8,
+ .report_desc_length = 63,
+ .report_desc = {
+ 0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */
+ 0x09, 0x06, /* USAGE (Keyboard) */
+ 0xa1, 0x01, /* COLLECTION (Application) */
+ 0x05, 0x07, /* USAGE_PAGE (Keyboard) */
+ 0x19, 0xe0, /* USAGE_MINIMUM (Keyboard LeftControl) */
+ 0x29, 0xe7, /* USAGE_MAXIMUM (Keyboard Right GUI) */
+ 0x15, 0x00, /* LOGICAL_MINIMUM (0) */
+ 0x25, 0x01, /* LOGICAL_MAXIMUM (1) */
+ 0x75, 0x01, /* REPORT_SIZE (1) */
+ 0x95, 0x08, /* REPORT_COUNT (8) */
+ 0x81, 0x02, /* INPUT (Data,Var,Abs) */
+ 0x95, 0x01, /* REPORT_COUNT (1) */
+ 0x75, 0x08, /* REPORT_SIZE (8) */
+ 0x81, 0x03, /* INPUT (Cnst,Var,Abs) */
+ 0x95, 0x05, /* REPORT_COUNT (5) */
+ 0x75, 0x01, /* REPORT_SIZE (1) */
+ 0x05, 0x08, /* USAGE_PAGE (LEDs) */
+ 0x19, 0x01, /* USAGE_MINIMUM (Num Lock) */
+ 0x29, 0x05, /* USAGE_MAXIMUM (Kana) */
+ 0x91, 0x02, /* OUTPUT (Data,Var,Abs) */
+ 0x95, 0x01, /* REPORT_COUNT (1) */
+ 0x75, 0x03, /* REPORT_SIZE (3) */
+ 0x91, 0x03, /* OUTPUT (Cnst,Var,Abs) */
+ 0x95, 0x06, /* REPORT_COUNT (6) */
+ 0x75, 0x08, /* REPORT_SIZE (8) */
+ 0x15, 0x00, /* LOGICAL_MINIMUM (0) */
+ 0x25, 0x65, /* LOGICAL_MAXIMUM (101) */
+ 0x05, 0x07, /* USAGE_PAGE (Keyboard) */
+ 0x19, 0x00, /* USAGE_MINIMUM (Reserved) */
+ 0x29, 0x65, /* USAGE_MAXIMUM (Keyboard Application) */
+ 0x81, 0x00, /* INPUT (Data,Ary,Abs) */
+ 0xc0 /* END_COLLECTION */
+ }
+};
+
+static struct platform_device my_hid = {
+ .name = "hidg",
+ .id = 0,
+ .num_resources = 0,
+ .resource = 0,
+ .dev.platform_data = &my_hid_data,
+};
+
+ You can add as many HID functions as you want, only limited by
+ the amount of interrupt endpoints your gadget driver supports.
+
+Send and receive HID reports
+
+ HID reports can be sent/received using read/write on the
+ /dev/hidgX character devices. See below for an example program
+ to do this.
+
+ hid_gadget_test is a small interactive program to test the HID
+ gadget driver. To use, point it at a hidg device and set the
+ device type (keyboard / mouse / joystick) - E.G.:
+
+ # hid_gadget_test /dev/hidg0 keyboard
+
+ You are now in the prompt of hid_gadget_test. You can type any
+ combination of options and values. Available options and
+ values are listed at program start. In keyboard mode you can
+ send up to six values.
+
+ For example type: g i s t r --left-shift
+
+ Hit return and the corresponding report will be sent by the
+ HID gadget.
+
+ Another interesting example is the caps lock test. Type
+ -–caps-lock and hit return. A report is then sent by the
+ gadget and you should receive the host answer, corresponding
+ to the caps lock LED status.
+
+ --caps-lock
+ recv report:2
+
+ With this command:
+
+ # hid_gadget_test /dev/hidg1 mouse
+
+ You can test the mouse emulation. Values are two signed numbers.
+
+
+Sample code
+
+/* hid_gadget_test */
+
+#include <pthread.h>
+#include <string.h>
+#include <stdio.h>
+#include <ctype.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+
+#define BUF_LEN 512
+
+struct options {
+ const char *opt;
+ unsigned char val;
+};
+
+static struct options kmod[] = {
+ {.opt = "--left-ctrl", .val = 0x01},
+ {.opt = "--right-ctrl", .val = 0x10},
+ {.opt = "--left-shift", .val = 0x02},
+ {.opt = "--right-shift", .val = 0x20},
+ {.opt = "--left-alt", .val = 0x04},
+ {.opt = "--right-alt", .val = 0x40},
+ {.opt = "--left-meta", .val = 0x08},
+ {.opt = "--right-meta", .val = 0x80},
+ {.opt = NULL}
+};
+
+static struct options kval[] = {
+ {.opt = "--return", .val = 0x28},
+ {.opt = "--esc", .val = 0x29},
+ {.opt = "--bckspc", .val = 0x2a},
+ {.opt = "--tab", .val = 0x2b},
+ {.opt = "--spacebar", .val = 0x2c},
+ {.opt = "--caps-lock", .val = 0x39},
+ {.opt = "--f1", .val = 0x3a},
+ {.opt = "--f2", .val = 0x3b},
+ {.opt = "--f3", .val = 0x3c},
+ {.opt = "--f4", .val = 0x3d},
+ {.opt = "--f5", .val = 0x3e},
+ {.opt = "--f6", .val = 0x3f},
+ {.opt = "--f7", .val = 0x40},
+ {.opt = "--f8", .val = 0x41},
+ {.opt = "--f9", .val = 0x42},
+ {.opt = "--f10", .val = 0x43},
+ {.opt = "--f11", .val = 0x44},
+ {.opt = "--f12", .val = 0x45},
+ {.opt = "--insert", .val = 0x49},
+ {.opt = "--home", .val = 0x4a},
+ {.opt = "--pageup", .val = 0x4b},
+ {.opt = "--del", .val = 0x4c},
+ {.opt = "--end", .val = 0x4d},
+ {.opt = "--pagedown", .val = 0x4e},
+ {.opt = "--right", .val = 0x4f},
+ {.opt = "--left", .val = 0x50},
+ {.opt = "--down", .val = 0x51},
+ {.opt = "--kp-enter", .val = 0x58},
+ {.opt = "--up", .val = 0x52},
+ {.opt = "--num-lock", .val = 0x53},
+ {.opt = NULL}
+};
+
+int keyboard_fill_report(char report[8], char buf[BUF_LEN], int *hold)
+{
+ char *tok = strtok(buf, " ");
+ int key = 0;
+ int i = 0;
+
+ for (; tok != NULL; tok = strtok(NULL, " ")) {
+
+ if (strcmp(tok, "--quit") == 0)
+ return -1;
+
+ if (strcmp(tok, "--hold") == 0) {
+ *hold = 1;
+ continue;
+ }
+
+ if (key < 6) {
+ for (i = 0; kval[i].opt != NULL; i++)
+ if (strcmp(tok, kval[i].opt) == 0) {
+ report[2 + key++] = kval[i].val;
+ break;
+ }
+ if (kval[i].opt != NULL)
+ continue;
+ }
+
+ if (key < 6)
+ if (islower(tok[0])) {
+ report[2 + key++] = (tok[0] - ('a' - 0x04));
+ continue;
+ }
+
+ for (i = 0; kmod[i].opt != NULL; i++)
+ if (strcmp(tok, kmod[i].opt) == 0) {
+ report[0] = report[0] | kmod[i].val;
+ break;
+ }
+ if (kmod[i].opt != NULL)
+ continue;
+
+ if (key < 6)
+ fprintf(stderr, "unknown option: %s\n", tok);
+ }
+ return 8;
+}
+
+static struct options mmod[] = {
+ {.opt = "--b1", .val = 0x01},
+ {.opt = "--b2", .val = 0x02},
+ {.opt = "--b3", .val = 0x04},
+ {.opt = NULL}
+};
+
+int mouse_fill_report(char report[8], char buf[BUF_LEN], int *hold)
+{
+ char *tok = strtok(buf, " ");
+ int mvt = 0;
+ int i = 0;
+ for (; tok != NULL; tok = strtok(NULL, " ")) {
+
+ if (strcmp(tok, "--quit") == 0)
+ return -1;
+
+ if (strcmp(tok, "--hold") == 0) {
+ *hold = 1;
+ continue;
+ }
+
+ for (i = 0; mmod[i].opt != NULL; i++)
+ if (strcmp(tok, mmod[i].opt) == 0) {
+ report[0] = report[0] | mmod[i].val;
+ break;
+ }
+ if (mmod[i].opt != NULL)
+ continue;
+
+ if (!(tok[0] == '-' && tok[1] == '-') && mvt < 2) {
+ errno = 0;
+ report[1 + mvt++] = (char)strtol(tok, NULL, 0);
+ if (errno != 0) {
+ fprintf(stderr, "Bad value:'%s'\n", tok);
+ report[1 + mvt--] = 0;
+ }
+ continue;
+ }
+
+ fprintf(stderr, "unknown option: %s\n", tok);
+ }
+ return 3;
+}
+
+static struct options jmod[] = {
+ {.opt = "--b1", .val = 0x10},
+ {.opt = "--b2", .val = 0x20},
+ {.opt = "--b3", .val = 0x40},
+ {.opt = "--b4", .val = 0x80},
+ {.opt = "--hat1", .val = 0x00},
+ {.opt = "--hat2", .val = 0x01},
+ {.opt = "--hat3", .val = 0x02},
+ {.opt = "--hat4", .val = 0x03},
+ {.opt = "--hatneutral", .val = 0x04},
+ {.opt = NULL}
+};
+
+int joystick_fill_report(char report[8], char buf[BUF_LEN], int *hold)
+{
+ char *tok = strtok(buf, " ");
+ int mvt = 0;
+ int i = 0;
+
+ *hold = 1;
+
+ /* set default hat position: neutral */
+ report[3] = 0x04;
+
+ for (; tok != NULL; tok = strtok(NULL, " ")) {
+
+ if (strcmp(tok, "--quit") == 0)
+ return -1;
+
+ for (i = 0; jmod[i].opt != NULL; i++)
+ if (strcmp(tok, jmod[i].opt) == 0) {
+ report[3] = (report[3] & 0xF0) | jmod[i].val;
+ break;
+ }
+ if (jmod[i].opt != NULL)
+ continue;
+
+ if (!(tok[0] == '-' && tok[1] == '-') && mvt < 3) {
+ errno = 0;
+ report[mvt++] = (char)strtol(tok, NULL, 0);
+ if (errno != 0) {
+ fprintf(stderr, "Bad value:'%s'\n", tok);
+ report[mvt--] = 0;
+ }
+ continue;
+ }
+
+ fprintf(stderr, "unknown option: %s\n", tok);
+ }
+ return 4;
+}
+
+void print_options(char c)
+{
+ int i = 0;
+
+ if (c == 'k') {
+ printf(" keyboard options:\n"
+ " --hold\n");
+ for (i = 0; kmod[i].opt != NULL; i++)
+ printf("\t\t%s\n", kmod[i].opt);
+ printf("\n keyboard values:\n"
+ " [a-z] or\n");
+ for (i = 0; kval[i].opt != NULL; i++)
+ printf("\t\t%-8s%s", kval[i].opt, i % 2 ? "\n" : "");
+ printf("\n");
+ } else if (c == 'm') {
+ printf(" mouse options:\n"
+ " --hold\n");
+ for (i = 0; mmod[i].opt != NULL; i++)
+ printf("\t\t%s\n", mmod[i].opt);
+ printf("\n mouse values:\n"
+ " Two signed numbers\n"
+ "--quit to close\n");
+ } else {
+ printf(" joystick options:\n");
+ for (i = 0; jmod[i].opt != NULL; i++)
+ printf("\t\t%s\n", jmod[i].opt);
+ printf("\n joystick values:\n"
+ " three signed numbers\n"
+ "--quit to close\n");
+ }
+}
+
+int main(int argc, const char *argv[])
+{
+ const char *filename = NULL;
+ int fd = 0;
+ char buf[BUF_LEN];
+ int cmd_len;
+ char report[8];
+ int to_send = 8;
+ int hold = 0;
+ fd_set rfds;
+ int retval, i;
+
+ if (argc < 3) {
+ fprintf(stderr, "Usage: %s devname mouse|keyboard|joystick\n",
+ argv[0]);
+ return 1;
+ }
+
+ if (argv[2][0] != 'k' && argv[2][0] != 'm' && argv[2][0] != 'j')
+ return 2;
+
+ filename = argv[1];
+
+ if ((fd = open(filename, O_RDWR, 0666)) == -1) {
+ perror(filename);
+ return 3;
+ }
+
+ print_options(argv[2][0]);
+
+ while (42) {
+
+ FD_ZERO(&rfds);
+ FD_SET(STDIN_FILENO, &rfds);
+ FD_SET(fd, &rfds);
+
+ retval = select(fd + 1, &rfds, NULL, NULL, NULL);
+ if (retval == -1 && errno == EINTR)
+ continue;
+ if (retval < 0) {
+ perror("select()");
+ return 4;
+ }
+
+ if (FD_ISSET(fd, &rfds)) {
+ cmd_len = read(fd, buf, BUF_LEN - 1);
+ printf("recv report:");
+ for (i = 0; i < cmd_len; i++)
+ printf(" %02x", buf[i]);
+ printf("\n");
+ }
+
+ if (FD_ISSET(STDIN_FILENO, &rfds)) {
+ memset(report, 0x0, sizeof(report));
+ cmd_len = read(STDIN_FILENO, buf, BUF_LEN - 1);
+
+ if (cmd_len == 0)
+ break;
+
+ buf[cmd_len - 1] = '\0';
+ hold = 0;
+
+ memset(report, 0x0, sizeof(report));
+ if (argv[2][0] == 'k')
+ to_send = keyboard_fill_report(report, buf, &hold);
+ else if (argv[2][0] == 'm')
+ to_send = mouse_fill_report(report, buf, &hold);
+ else
+ to_send = joystick_fill_report(report, buf, &hold);
+
+ if (to_send == -1)
+ break;
+
+ if (write(fd, report, to_send) != to_send) {
+ perror(filename);
+ return 5;
+ }
+ if (!hold) {
+ memset(report, 0x0, sizeof(report));
+ if (write(fd, report, to_send) != to_send) {
+ perror(filename);
+ return 6;
+ }
+ }
+ }
+ }
+
+ close(fd);
+ return 0;
+}
diff --git a/Documentation/usb/gadget_multi.txt b/Documentation/usb/gadget_multi.txt
new file mode 100644
index 00000000000..80f4ef0eb75
--- /dev/null
+++ b/Documentation/usb/gadget_multi.txt
@@ -0,0 +1,150 @@
+ -*- org -*-
+
+* Overview
+
+The Multifunction Composite Gadget (or g_multi) is a composite gadget
+that makes extensive use of the composite framework to provide
+a... multifunction gadget.
+
+In it's standard configuration it provides a single USB configuration
+with RNDIS[1] (that is Ethernet), USB CDC[2] ACM (that is serial) and
+USB Mass Storage functions.
+
+A CDC ECM (Ethernet) function may be turned on via a Kconfig option
+and RNDIS can be turned off. If they are both enabled the gadget will
+have two configurations -- one with RNDIS and another with CDC ECM[3].
+
+Please not that if you use non-standard configuration (that is enable
+CDC ECM) you may need to change vendor and/or product ID.
+
+* Host drivers
+
+To make use of the gadget one needs to make it work on host side --
+without that there's no hope of achieving anything with the gadget.
+As one might expect, things one need to do very from system to system.
+
+** Linux host drivers
+
+Since the gadget uses standard composite framework and appears as such
+to Linux host it does not need any additional drivers on Linux host
+side. All the functions are handled by respective drivers developed
+for them.
+
+This is also true for two configuration set-up with RNDIS
+configuration being the first one. Linux host will use the second
+configuration with CDC ECM which should work better under Linux.
+
+** Windows host drivers
+
+For the gadget two work under Windows two conditions have to be met:
+
+*** Detecting as composite gadget
+
+First of all, Windows need to detect the gadget as an USB composite
+gadget which on its own have some conditions[4]. If they are met,
+Windows lets USB Generic Parent Driver[5] handle the device which then
+tries to much drivers for each individual interface (sort of, don't
+get into too many details).
+
+The good news is: you do not have to worry about most of the
+conditions!
+
+The only thing to worry is that the gadget has to have a single
+configuration so a dual RNDIS and CDC ECM gadget won't work unless you
+create a proper INF -- and of course, if you do submit it!
+
+*** Installing drivers for each function
+
+The other, trickier thing is making Windows install drivers for each
+individual function.
+
+For mass storage it is trivial since Windows detect it's an interface
+implementing USB Mass Storage class and selects appropriate driver.
+
+Things are harder with RDNIS and CDC ACM.
+
+**** RNDIS
+
+To make Windows select RNDIS drivers for the first function in the
+gadget, one needs to use the [[file:linux.inf]] file provided with this
+document. It "attaches" Window's RNDIS driver to the first interface
+of the gadget.
+
+Please note, that while testing we encountered some issues[6] when
+RNDIS was not the first interface. You do not need to worry abut it
+unless you are trying to develop your own gadget in which case watch
+out for this bug.
+
+**** CDC ACM
+
+Similarly, [[file:linux-cdc-acm.inf]] is provided for CDC ACM.
+
+**** Customising the gadget
+
+If you intend to hack the g_multi gadget be advised that rearranging
+functions will obviously change interface numbers for each of the
+functionality. As an effect provided INFs won't work since they have
+interface numbers hard-coded in them (it's not hard to change those
+though[7]).
+
+This also means, that after experimenting with g_multi and changing
+provided functions one should change gadget's vendor and/or product ID
+so there will be no collision with other customised gadgets or the
+original gadget.
+
+Failing to comply may cause brain damage after wondering for hours why
+things don't work as intended before realising Windows have cached
+some drivers information (changing USB port may sometimes help plus
+you might try using USBDeview[8] to remove the phantom device).
+
+**** INF testing
+
+Provided INF files have been tested on Windows XP SP3, Windows Vista
+and Windows 7, all 32-bit versions. It should work on 64-bit versions
+as well. It most likely won't work on Windows prior to Windows XP
+SP2.
+
+** Other systems
+
+At this moment, drivers for any other systems have not been tested.
+Knowing how MacOS is based on BSD and BSD is an Open Source it is
+believed that it should (read: "I have no idea whether it will") work
+out-of-the-box.
+
+For more exotic systems I have even less to say...
+
+Any testing and drivers *are* *welcome*!
+
+* Authors
+
+This document has been written by Michal Nazarewicz
+([[mailto:mina86@mina86.com]]). INF files have been hacked with
+support of Marek Szyprowski ([[mailto:m.szyprowski@samsung.com]]) and
+Xiaofan Chen ([[mailto:xiaofanc@gmail.com]]) basing on the MS RNDIS
+template[9], Microchip's CDC ACM INF file and David Brownell's
+([[mailto:dbrownell@users.sourceforge.net]]) original INF files.
+
+* Footnotes
+
+[1] Remote Network Driver Interface Specification,
+[[http://msdn.microsoft.com/en-us/library/ee484414.aspx]].
+
+[2] Communications Device Class Abstract Control Model, spec for this
+and other USB classes can be found at
+[[http://www.usb.org/developers/devclass_docs/]].
+
+[3] CDC Ethernet Control Model.
+
+[4] [[http://msdn.microsoft.com/en-us/library/ff537109(v=VS.85).aspx]]
+
+[5] [[http://msdn.microsoft.com/en-us/library/ff539234(v=VS.85).aspx]]
+
+[6] To put it in some other nice words, Windows failed to respond to
+any user input.
+
+[7] You may find [[http://www.cygnal.org/ubb/Forum9/HTML/001050.html]]
+useful.
+
+[8] http://www.nirsoft.net/utils/usb_devices_view.html
+
+[9] [[http://msdn.microsoft.com/en-us/library/ff570620.aspx]]
diff --git a/Documentation/usb/gadget_serial.txt b/Documentation/usb/gadget_serial.txt
index eac7df94d8e..61e67f6a20a 100644
--- a/Documentation/usb/gadget_serial.txt
+++ b/Documentation/usb/gadget_serial.txt
@@ -151,88 +151,23 @@ instructions below to install the host side driver.
Installing the Windows Host ACM Driver
--------------------------------------
-To use the Windows ACM driver you must have the files "gserial.inf"
-and "usbser.sys" together in a folder on the Windows machine.
-
-The "gserial.inf" file is given here.
-
--------------------- CUT HERE --------------------
-[Version]
-Signature="$Windows NT$"
-Class=Ports
-ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
-Provider=%LINUX%
-DriverVer=08/17/2004,0.0.2.0
-; Copyright (C) 2004 Al Borchers (alborchers@steinerpoint.com)
-
-[Manufacturer]
-%LINUX%=GSerialDeviceList
-
-[GSerialDeviceList]
-%GSERIAL%=GSerialInstall, USB\VID_0525&PID_A4A7
-
-[DestinationDirs]
-DefaultDestDir=10,System32\Drivers
-
-[GSerialInstall]
-CopyFiles=GSerialCopyFiles
-AddReg=GSerialAddReg
-
-[GSerialCopyFiles]
-usbser.sys
-
-[GSerialAddReg]
-HKR,,DevLoader,,*ntkern
-HKR,,NTMPDriver,,usbser.sys
-HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
-
-[GSerialInstall.Services]
-AddService = usbser,0x0002,GSerialService
-
-[GSerialService]
-DisplayName = %GSERIAL_DISPLAY_NAME%
-ServiceType = 1 ; SERVICE_KERNEL_DRIVER
-StartType = 3 ; SERVICE_DEMAND_START
-ErrorControl = 1 ; SERVICE_ERROR_NORMAL
-ServiceBinary = %10%\System32\Drivers\usbser.sys
-LoadOrderGroup = Base
-
-[Strings]
-LINUX = "Linux"
-GSERIAL = "Gadget Serial"
-GSERIAL_DISPLAY_NAME = "USB Gadget Serial Driver"
--------------------- CUT HERE --------------------
-
-The "usbser.sys" file comes with various versions of Windows.
-For example, it can be found on Windows XP typically in
-
- C:\WINDOWS\Driver Cache\i386\driver.cab
-
-Or it can be found on the Windows 98SE CD in the "win98" folder
-in the "DRIVER11.CAB" through "DRIVER20.CAB" cab files. You will
-need the DOS "expand" program, the Cygwin "cabextract" program, or
-a similar program to unpack these cab files and extract "usbser.sys".
-
-For example, to extract "usbser.sys" into the current directory
-on Windows XP, open a DOS window and run a command like
-
- expand C:\WINDOWS\Driver~1\i386\driver.cab -F:usbser.sys .
-
-(Thanks to Nishant Kamat for pointing out this DOS command.)
+To use the Windows ACM driver you must have the "linux-cdc-acm.inf"
+file (provided along this document) which supports all recent versions
+of Windows.
When the gadget serial driver is loaded and the USB device connected
to the Windows host with a USB cable, Windows should recognize the
gadget serial device and ask for a driver. Tell Windows to find the
-driver in the folder that contains "gserial.inf" and "usbser.sys".
+driver in the folder that contains the "linux-cdc-acm.inf" file.
For example, on Windows XP, when the gadget serial device is first
plugged in, the "Found New Hardware Wizard" starts up. Select
-"Install from a list or specific location (Advanced)", then on
-the next screen select "Include this location in the search" and
-enter the path or browse to the folder containing "gserial.inf" and
-"usbser.sys". Windows will complain that the Gadget Serial driver
-has not passed Windows Logo testing, but select "Continue anyway"
-and finish the driver installation.
+"Install from a list or specific location (Advanced)", then on the
+next screen select "Include this location in the search" and enter the
+path or browse to the folder containing the "linux-cdc-acm.inf" file.
+Windows will complain that the Gadget Serial driver has not passed
+Windows Logo testing, but select "Continue anyway" and finish the
+driver installation.
On Windows XP, in the "Device Manager" (under "Control Panel",
"System", "Hardware") expand the "Ports (COM & LPT)" entry and you
@@ -345,5 +280,3 @@ you should be able to send data back and forth between the gadget
side and host side systems. Anything you type on the terminal
window on the gadget side should appear in the terminal window on
the host side and vice versa.
-
-
diff --git a/Documentation/usb/hotplug.txt b/Documentation/usb/hotplug.txt
index f53170665f3..4c945716a66 100644
--- a/Documentation/usb/hotplug.txt
+++ b/Documentation/usb/hotplug.txt
@@ -10,7 +10,7 @@ immediately usable. That means the system must do many things, including:
- Bind a driver to that device. Bus frameworks do that using a
device driver's probe() routine.
-
+
- Tell other subsystems to configure the new device. Print
queues may need to be enabled, networks brought up, disk
partitions mounted, and so on. In some cases these will
@@ -84,7 +84,7 @@ USB MODUTILS SUPPORT
Current versions of module-init-tools will create a "modules.usbmap" file
which contains the entries from each driver's MODULE_DEVICE_TABLE. Such
files can be used by various user mode policy agents to make sure all the
-right driver modules get loaded, either at boot time or later.
+right driver modules get loaded, either at boot time or later.
See <linux/usb.h> for full information about such table entries; or look
at existing drivers. Each table entry describes one or more criteria to
diff --git a/Documentation/usb/linux-cdc-acm.inf b/Documentation/usb/linux-cdc-acm.inf
new file mode 100644
index 00000000000..612e7220fb2
--- /dev/null
+++ b/Documentation/usb/linux-cdc-acm.inf
@@ -0,0 +1,107 @@
+; Windows USB CDC ACM Setup File
+
+; Based on INF template which was:
+; Copyright (c) 2000 Microsoft Corporation
+; Copyright (c) 2007 Microchip Technology Inc.
+; likely to be covered by the MLPL as found at:
+; <http://msdn.microsoft.com/en-us/cc300389.aspx#MLPL>.
+; For use only on Windows operating systems.
+
+[Version]
+Signature="$Windows NT$"
+Class=Ports
+ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
+Provider=%Linux%
+DriverVer=11/15/2007,5.1.2600.0
+
+[Manufacturer]
+%Linux%=DeviceList, NTamd64
+
+[DestinationDirs]
+DefaultDestDir=12
+
+
+;------------------------------------------------------------------------------
+; Windows 2000/XP/Vista-32bit Sections
+;------------------------------------------------------------------------------
+
+[DriverInstall.nt]
+include=mdmcpq.inf
+CopyFiles=DriverCopyFiles.nt
+AddReg=DriverInstall.nt.AddReg
+
+[DriverCopyFiles.nt]
+usbser.sys,,,0x20
+
+[DriverInstall.nt.AddReg]
+HKR,,DevLoader,,*ntkern
+HKR,,NTMPDriver,,USBSER.sys
+HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+
+[DriverInstall.nt.Services]
+AddService=usbser, 0x00000002, DriverService.nt
+
+[DriverService.nt]
+DisplayName=%SERVICE%
+ServiceType=1
+StartType=3
+ErrorControl=1
+ServiceBinary=%12%\USBSER.sys
+
+;------------------------------------------------------------------------------
+; Vista-64bit Sections
+;------------------------------------------------------------------------------
+
+[DriverInstall.NTamd64]
+include=mdmcpq.inf
+CopyFiles=DriverCopyFiles.NTamd64
+AddReg=DriverInstall.NTamd64.AddReg
+
+[DriverCopyFiles.NTamd64]
+USBSER.sys,,,0x20
+
+[DriverInstall.NTamd64.AddReg]
+HKR,,DevLoader,,*ntkern
+HKR,,NTMPDriver,,USBSER.sys
+HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+
+[DriverInstall.NTamd64.Services]
+AddService=usbser, 0x00000002, DriverService.NTamd64
+
+[DriverService.NTamd64]
+DisplayName=%SERVICE%
+ServiceType=1
+StartType=3
+ErrorControl=1
+ServiceBinary=%12%\USBSER.sys
+
+
+;------------------------------------------------------------------------------
+; Vendor and Product ID Definitions
+;------------------------------------------------------------------------------
+; When developing your USB device, the VID and PID used in the PC side
+; application program and the firmware on the microcontroller must match.
+; Modify the below line to use your VID and PID. Use the format as shown
+; below.
+; Note: One INF file can be used for multiple devices with different
+; VID and PIDs. For each supported device, append
+; ",USB\VID_xxxx&PID_yyyy" to the end of the line.
+;------------------------------------------------------------------------------
+[SourceDisksFiles]
+[SourceDisksNames]
+[DeviceList]
+%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_0525&PID_A4AB&MI_02
+
+[DeviceList.NTamd64]
+%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_0525&PID_A4AB&MI_02
+
+
+;------------------------------------------------------------------------------
+; String Definitions
+;------------------------------------------------------------------------------
+;Modify these strings to customize your device
+;------------------------------------------------------------------------------
+[Strings]
+Linux = "Linux Developer Community"
+DESCRIPTION = "Gadget Serial"
+SERVICE = "USB RS-232 Emulation Driver"
diff --git a/Documentation/usb/linux.inf b/Documentation/usb/linux.inf
index 2f7217d124f..4dee9585122 100644
--- a/Documentation/usb/linux.inf
+++ b/Documentation/usb/linux.inf
@@ -1,200 +1,66 @@
-; MS-Windows driver config matching some basic modes of the
-; Linux-USB Ethernet/RNDIS gadget firmware:
-;
-; - RNDIS plus CDC Ethernet ... this may be familiar as a DOCSIS
-; cable modem profile, and supports most non-Microsoft USB hosts
-;
-; - RNDIS plus CDC Subset ... used by hardware that incapable of
-; full CDC Ethernet support.
-;
-; Microsoft only directly supports RNDIS drivers, and bundled them into XP.
-; The Microsoft "Remote NDIS USB Driver Kit" is currently found at:
-; http://www.microsoft.com/whdc/hwdev/resources/HWservices/rndis.mspx
-
+; Based on template INF file found at
+; <http://msdn.microsoft.com/en-us/library/ff570620.aspx>
+; which was:
+; Copyright (c) Microsoft Corporation
+; and released under the MLPL as found at:
+; <http://msdn.microsoft.com/en-us/cc300389.aspx#MLPL>.
+; For use only on Windows operating systems.
[Version]
-Signature = "$CHICAGO$"
+Signature = "$Windows NT$"
Class = Net
ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318}
Provider = %Linux%
-Compatible = 1
-MillenniumPreferred = .ME
-DriverVer = 03/30/2004,0.0.0.0
-; catalog file would be used by WHQL
-;CatalogFile = Linux.cat
+DriverVer = 06/21/2006,6.0.6000.16384
[Manufacturer]
-%Linux% = LinuxDevices,NT.5.1
+%Linux% = LinuxDevices,NTx86,NTamd64,NTia64
+
+; Decoration for x86 architecture
+[LinuxDevices.NTx86]
+%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_0525&PID_a4ab&MI_00
-[LinuxDevices]
-; NetChip IDs, used by both firmware modes
-%LinuxDevice% = RNDIS, USB\VID_0525&PID_a4a2
+; Decoration for x64 architecture
+[LinuxDevices.NTamd64]
+%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_0525&PID_a4ab&MI_00
-[LinuxDevices.NT.5.1]
-%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2
+; Decoration for ia64 architecture
+[LinuxDevices.NTia64]
+%LinuxDevice% = RNDIS.NT.5.1, USB\VID_0525&PID_a4a2, USB\VID_0525&PID_a4ab&MI_00
+;@@@ This is the common setting for setup
[ControlFlags]
ExcludeFromSelect=*
-; Windows 98, Windows 98 Second Edition specific sections --------
-
-[RNDIS]
-DeviceID = usb8023
-MaxInstance = 512
-DriverVer = 03/30/2004,0.0.0.0
-AddReg = RNDIS_AddReg_98, RNDIS_AddReg_Common
-
-[RNDIS_AddReg_98]
-HKR, , DevLoader, 0, *ndis
-HKR, , DeviceVxDs, 0, usb8023.sys
-HKR, NDIS, LogDriverName, 0, "usb8023"
-HKR, NDIS, MajorNdisVersion, 1, 5
-HKR, NDIS, MinorNdisVersion, 1, 0
-HKR, Ndi\Interfaces, DefUpper, 0, "ndis3,ndis4,ndis5"
-HKR, Ndi\Interfaces, DefLower, 0, "ethernet"
-HKR, Ndi\Interfaces, UpperRange, 0, "ndis3,ndis4,ndis5"
-HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
-HKR, Ndi\Install, ndis3, 0, "RNDIS_Install_98"
-HKR, Ndi\Install, ndis4, 0, "RNDIS_Install_98"
-HKR, Ndi\Install, ndis5, 0, "RNDIS_Install_98"
-HKR, Ndi, DeviceId, 0, "USB\VID_0525&PID_a4a2"
-
-[RNDIS_Install_98]
-CopyFiles=RNDIS_CopyFiles_98
-
-[RNDIS_CopyFiles_98]
-usb8023.sys, usb8023w.sys, , 0
-rndismp.sys, rndismpw.sys, , 0
-
-; Windows Millennium Edition specific sections --------------------
-
-[RNDIS.ME]
-DeviceID = usb8023
-MaxInstance = 512
-DriverVer = 03/30/2004,0.0.0.0
-AddReg = RNDIS_AddReg_ME, RNDIS_AddReg_Common
-Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
-BusType = 15
-
-[RNDIS_AddReg_ME]
-HKR, , DevLoader, 0, *ndis
-HKR, , DeviceVxDs, 0, usb8023.sys
-HKR, NDIS, LogDriverName, 0, "usb8023"
-HKR, NDIS, MajorNdisVersion, 1, 5
-HKR, NDIS, MinorNdisVersion, 1, 0
-HKR, Ndi\Interfaces, DefUpper, 0, "ndis3,ndis4,ndis5"
-HKR, Ndi\Interfaces, DefLower, 0, "ethernet"
-HKR, Ndi\Interfaces, UpperRange, 0, "ndis3,ndis4,ndis5"
-HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
-HKR, Ndi\Install, ndis3, 0, "RNDIS_Install_ME"
-HKR, Ndi\Install, ndis4, 0, "RNDIS_Install_ME"
-HKR, Ndi\Install, ndis5, 0, "RNDIS_Install_ME"
-HKR, Ndi, DeviceId, 0, "USB\VID_0525&PID_a4a2"
-
-[RNDIS_Install_ME]
-CopyFiles=RNDIS_CopyFiles_ME
-
-[RNDIS_CopyFiles_ME]
-usb8023.sys, usb8023m.sys, , 0
-rndismp.sys, rndismpm.sys, , 0
-
-; Windows 2000 specific sections ---------------------------------
-
-[RNDIS.NT]
-Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
-BusType = 15
-DriverVer = 03/30/2004,0.0.0.0
-AddReg = RNDIS_AddReg_NT, RNDIS_AddReg_Common
-CopyFiles = RNDIS_CopyFiles_NT
-
-[RNDIS.NT.Services]
-AddService = USB_RNDIS, 2, RNDIS_ServiceInst_NT, RNDIS_EventLog
-
-[RNDIS_CopyFiles_NT]
-; no rename of files on Windows 2000, use the 'k' names as is
-usb8023k.sys, , , 0
-rndismpk.sys, , , 0
-
-[RNDIS_ServiceInst_NT]
-DisplayName = %ServiceDisplayName%
-ServiceType = 1
-StartType = 3
-ErrorControl = 1
-ServiceBinary = %12%\usb8023k.sys
-LoadOrderGroup = NDIS
-AddReg = RNDIS_WMI_AddReg_NT
-
-[RNDIS_WMI_AddReg_NT]
-HKR, , MofImagePath, 0x00020000, "System32\drivers\rndismpk.sys"
-
-; Windows XP specific sections -----------------------------------
-
+; DDInstall section
+; References the in-build Netrndis.inf
[RNDIS.NT.5.1]
-Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
-BusType = 15
-DriverVer = 03/30/2004,0.0.0.0
-AddReg = RNDIS_AddReg_NT, RNDIS_AddReg_Common
-; no copyfiles - the files are already in place
-
+Characteristics = 0x84 ; NCF_PHYSICAL + NCF_HAS_UI
+BusType = 15
+; NEVER REMOVE THE FOLLOWING REFERENCE FOR NETRNDIS.INF
+include = netrndis.inf
+needs = Usb_Rndis.ndi
+AddReg = Rndis_AddReg_Vista
+
+; DDInstal.Services section
[RNDIS.NT.5.1.Services]
-AddService = USB_RNDIS, 2, RNDIS_ServiceInst_51, RNDIS_EventLog
-
-[RNDIS_ServiceInst_51]
-DisplayName = %ServiceDisplayName%
-ServiceType = 1
-StartType = 3
-ErrorControl = 1
-ServiceBinary = %12%\usb8023.sys
-LoadOrderGroup = NDIS
-AddReg = RNDIS_WMI_AddReg_51
-
-[RNDIS_WMI_AddReg_51]
-HKR, , MofImagePath, 0x00020000, "System32\drivers\rndismp.sys"
-
-; Windows 2000 and Windows XP common sections --------------------
-
-[RNDIS_AddReg_NT]
-HKR, Ndi, Service, 0, "USB_RNDIS"
-HKR, Ndi\Interfaces, UpperRange, 0, "ndis5"
-HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
-
-[RNDIS_EventLog]
-AddReg = RNDIS_EventLog_AddReg
-
-[RNDIS_EventLog_AddReg]
-HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll"
-HKR, , TypesSupported, 0x00010001, 7
-
-; Common Sections -------------------------------------------------
-
-[RNDIS_AddReg_Common]
-HKR, NDI\params\NetworkAddress, ParamDesc, 0, %NetworkAddress%
-HKR, NDI\params\NetworkAddress, type, 0, "edit"
-HKR, NDI\params\NetworkAddress, LimitText, 0, "12"
-HKR, NDI\params\NetworkAddress, UpperCase, 0, "1"
-HKR, NDI\params\NetworkAddress, default, 0, " "
-HKR, NDI\params\NetworkAddress, optional, 0, "1"
-
-[SourceDisksNames]
-1=%SourceDisk%,,1
-
-[SourceDisksFiles]
-usb8023m.sys=1
-rndismpm.sys=1
-usb8023w.sys=1
-rndismpw.sys=1
-usb8023k.sys=1
-rndismpk.sys=1
-
-[DestinationDirs]
-RNDIS_CopyFiles_98 = 10, system32/drivers
-RNDIS_CopyFiles_ME = 10, system32/drivers
-RNDIS_CopyFiles_NT = 12
+include = netrndis.inf
+needs = Usb_Rndis.ndi.Services
+
+; Optional registry settings. You can modify as needed.
+[RNDIS_AddReg_Vista]
+HKR, NDI\params\VistaProperty, ParamDesc, 0, %Vista_Property%
+HKR, NDI\params\VistaProperty, type, 0, "edit"
+HKR, NDI\params\VistaProperty, LimitText, 0, "12"
+HKR, NDI\params\VistaProperty, UpperCase, 0, "1"
+HKR, NDI\params\VistaProperty, default, 0, " "
+HKR, NDI\params\VistaProperty, optional, 0, "1"
+
+; No sys copyfiles - the sys files are already in-build
+; (part of the operating system).
+; We do not support XP SP1-, 2003 SP1-, ME, 9x.
[Strings]
-ServiceDisplayName = "USB Remote NDIS Network Device Driver"
-NetworkAddress = "Network Address"
Linux = "Linux Developer Community"
LinuxDevice = "Linux USB Ethernet/RNDIS Gadget"
-SourceDisk = "Ethernet/RNDIS Gadget Driver Install Disk"
-
+Vista_Property = "Optional Vista Property"
diff --git a/Documentation/usb/mtouchusb.txt b/Documentation/usb/mtouchusb.txt
index e43cfffaa10..86302cd53ed 100644
--- a/Documentation/usb/mtouchusb.txt
+++ b/Documentation/usb/mtouchusb.txt
@@ -54,10 +54,6 @@ generic functions like calibrations, resets, and vendor information can be
requested from the userspace (And the drivers would handle the vendor specific
tasks).
-ADDITIONAL INFORMATION/UPDATES/X CONFIGURATION EXAMPLE:
-
-http://groomlakelabs.com/grandamp/code/microtouch/
-
TODO:
Implement a control urb again to handle requests to and from the device
@@ -68,7 +64,7 @@ DISCLAIMER:
I am not a MicroTouch/3M employee, nor have I ever been. 3M does not support
this driver! If you want touch drivers only supported within X, please go to:
-http://www.3m.com/3MTouchSystems/downloads/
+http://www.3m.com/3MTouchSystems/
THANKS:
diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt
index 3bf6818c8cf..b29d8e56cf2 100644
--- a/Documentation/usb/power-management.txt
+++ b/Documentation/usb/power-management.txt
@@ -2,7 +2,7 @@
Alan Stern <stern@rowland.harvard.edu>
- November 10, 2009
+ December 11, 2009
@@ -29,9 +29,9 @@ covered to some extent (see Documentation/power/*.txt for more
information about system PM).
Note: Dynamic PM support for USB is present only if the kernel was
-built with CONFIG_USB_SUSPEND enabled. System PM support is present
-only if the kernel was built with CONFIG_SUSPEND or CONFIG_HIBERNATION
-enabled.
+built with CONFIG_USB_SUSPEND enabled (which depends on
+CONFIG_PM_RUNTIME). System PM support is present only if the kernel
+was built with CONFIG_SUSPEND or CONFIG_HIBERNATION enabled.
What is Remote Wakeup?
@@ -107,7 +107,9 @@ allowed to issue dynamic suspends.
The user interface for controlling dynamic PM is located in the power/
subdirectory of each USB device's sysfs directory, that is, in
/sys/bus/usb/devices/.../power/ where "..." is the device's ID. The
-relevant attribute files are: wakeup, level, and autosuspend.
+relevant attribute files are: wakeup, control, and autosuspend.
+(There may also be a file named "level"; this file was deprecated
+as of the 2.6.35 kernel and replaced by the "control" file.)
power/wakeup
@@ -120,7 +122,7 @@ relevant attribute files are: wakeup, level, and autosuspend.
while the device is suspended, the change won't take
effect until the following suspend.)
- power/level
+ power/control
This file contains one of two words: "on" or "auto".
You can write those words to the file to change the
@@ -148,14 +150,15 @@ relevant attribute files are: wakeup, level, and autosuspend.
never to autosuspend. You can write a number to the
file to change the autosuspend idle-delay time.
-Writing "-1" to power/autosuspend and writing "on" to power/level do
+Writing "-1" to power/autosuspend and writing "on" to power/control do
essentially the same thing -- they both prevent the device from being
autosuspended. Yes, this is a redundancy in the API.
(In 2.6.21 writing "0" to power/autosuspend would prevent the device
from being autosuspended; the behavior was changed in 2.6.22. The
power/autosuspend attribute did not exist prior to 2.6.21, and the
-power/level attribute did not exist prior to 2.6.22.)
+power/level attribute did not exist prior to 2.6.22. power/control
+was added in 2.6.34.)
Changing the default idle-delay time
@@ -212,7 +215,7 @@ among printers and scanners, but plenty of other types of device have
the same deficiency.
For this reason, by default the kernel disables autosuspend (the
-power/level attribute is initialized to "on") for all devices other
+power/control attribute is initialized to "on") for all devices other
than hubs. Hubs, at least, appear to be reasonably well-behaved in
this regard.
@@ -229,6 +232,11 @@ necessary operations by hand or add them to a udev script. You can
also change the idle-delay time; 2 seconds is not the best choice for
every device.
+If a driver knows that its device has proper suspend/resume support,
+it can enable autosuspend all by itself. For example, the video
+driver for a laptop's webcam might do this, since these devices are
+rarely used and so should normally be autosuspended.
+
Sometimes it turns out that even when a device does work okay with
autosuspend there are still problems. For example, there are
experimental patches adding autosuspend support to the usbhid driver,
@@ -321,69 +329,81 @@ driver does so by calling these six functions:
void usb_autopm_get_interface_no_resume(struct usb_interface *intf);
void usb_autopm_put_interface_no_suspend(struct usb_interface *intf);
-The functions work by maintaining a counter in the usb_interface
-structure. When intf->pm_usage_count is > 0 then the interface is
-deemed to be busy, and the kernel will not autosuspend the interface's
-device. When intf->pm_usage_count is <= 0 then the interface is
-considered to be idle, and the kernel may autosuspend the device.
+The functions work by maintaining a usage counter in the
+usb_interface's embedded device structure. When the counter is > 0
+then the interface is deemed to be busy, and the kernel will not
+autosuspend the interface's device. When the usage counter is = 0
+then the interface is considered to be idle, and the kernel may
+autosuspend the device.
-(There is a similar pm_usage_count field in struct usb_device,
+(There is a similar usage counter field in struct usb_device,
associated with the device itself rather than any of its interfaces.
-This field is used only by the USB core.)
-
-Drivers must not modify intf->pm_usage_count directly; its value
-should be changed only be using the functions listed above. Drivers
-are responsible for insuring that the overall change to pm_usage_count
-during their lifetime balances out to 0 (it may be necessary for the
-disconnect method to call usb_autopm_put_interface() one or more times
-to fulfill this requirement). The first two routines use the PM mutex
-in struct usb_device for mutual exclusion; drivers using the async
-routines are responsible for their own synchronization and mutual
-exclusion.
-
- usb_autopm_get_interface() increments pm_usage_count and
- attempts an autoresume if the new value is > 0 and the
- device is suspended.
-
- usb_autopm_put_interface() decrements pm_usage_count and
- attempts an autosuspend if the new value is <= 0 and the
- device isn't suspended.
+This counter is used only by the USB core.)
+
+Drivers need not be concerned about balancing changes to the usage
+counter; the USB core will undo any remaining "get"s when a driver
+is unbound from its interface. As a corollary, drivers must not call
+any of the usb_autopm_* functions after their diconnect() routine has
+returned.
+
+Drivers using the async routines are responsible for their own
+synchronization and mutual exclusion.
+
+ usb_autopm_get_interface() increments the usage counter and
+ does an autoresume if the device is suspended. If the
+ autoresume fails, the counter is decremented back.
+
+ usb_autopm_put_interface() decrements the usage counter and
+ attempts an autosuspend if the new value is = 0.
usb_autopm_get_interface_async() and
usb_autopm_put_interface_async() do almost the same things as
- their non-async counterparts. The differences are: they do
- not acquire the PM mutex, and they use a workqueue to do their
+ their non-async counterparts. The big difference is that they
+ use a workqueue to do the resume or suspend part of their
jobs. As a result they can be called in an atomic context,
such as an URB's completion handler, but when they return the
- device will not generally not yet be in the desired state.
+ device will generally not yet be in the desired state.
usb_autopm_get_interface_no_resume() and
usb_autopm_put_interface_no_suspend() merely increment or
- decrement the pm_usage_count value; they do not attempt to
- carry out an autoresume or an autosuspend. Hence they can be
- called in an atomic context.
+ decrement the usage counter; they do not attempt to carry out
+ an autoresume or an autosuspend. Hence they can be called in
+ an atomic context.
-The conventional usage pattern is that a driver calls
+The simplest usage pattern is that a driver calls
usb_autopm_get_interface() in its open routine and
-usb_autopm_put_interface() in its close or release routine. But
-other patterns are possible.
+usb_autopm_put_interface() in its close or release routine. But other
+patterns are possible.
The autosuspend attempts mentioned above will often fail for one
-reason or another. For example, the power/level attribute might be
+reason or another. For example, the power/control attribute might be
set to "on", or another interface in the same device might not be
idle. This is perfectly normal. If the reason for failure was that
-the device hasn't been idle for long enough, a delayed workqueue
-routine is automatically set up to carry out the operation when the
-autosuspend idle-delay has expired.
+the device hasn't been idle for long enough, a timer is scheduled to
+carry out the operation automatically when the autosuspend idle-delay
+has expired.
Autoresume attempts also can fail, although failure would mean that
the device is no longer present or operating properly. Unlike
-autosuspend, there's no delay for an autoresume.
+autosuspend, there's no idle-delay for an autoresume.
Other parts of the driver interface
-----------------------------------
+Drivers can enable autosuspend for their devices by calling
+
+ usb_enable_autosuspend(struct usb_device *udev);
+
+in their probe() routine, if they know that the device is capable of
+suspending and resuming correctly. This is exactly equivalent to
+writing "auto" to the device's power/control attribute. Likewise,
+drivers can disable autosuspend by calling
+
+ usb_disable_autosuspend(struct usb_device *udev);
+
+This is exactly the same as writing "on" to the power/control attribute.
+
Sometimes a driver needs to make sure that remote wakeup is enabled
during autosuspend. For example, there's not much point
autosuspending a keyboard if the user can't cause the keyboard to do a
@@ -395,26 +415,27 @@ though, setting this flag won't cause the kernel to autoresume it.
Normally a driver would set this flag in its probe method, at which
time the device is guaranteed not to be autosuspended.)
-The synchronous usb_autopm_* routines have to run in a sleepable
-process context; they must not be called from an interrupt handler or
-while holding a spinlock. In fact, the entire autosuspend mechanism
-is not well geared toward interrupt-driven operation. However there
-is one thing a driver can do in an interrupt handler:
+If a driver does its I/O asynchronously in interrupt context, it
+should call usb_autopm_get_interface_async() before starting output and
+usb_autopm_put_interface_async() when the output queue drains. When
+it receives an input event, it should call
usb_mark_last_busy(struct usb_device *udev);
-This sets udev->last_busy to the current time. udev->last_busy is the
-field used for idle-delay calculations; updating it will cause any
-pending autosuspend to be moved back. The usb_autopm_* routines will
-also set the last_busy field to the current time.
-
-Calling urb_mark_last_busy() from within an URB completion handler is
-subject to races: The kernel may have just finished deciding the
-device has been idle for long enough but not yet gotten around to
-calling the driver's suspend method. The driver would have to be
-responsible for synchronizing its suspend method with its URB
-completion handler and causing the autosuspend to fail with -EBUSY if
-an URB had completed too recently.
+in the event handler. This sets udev->last_busy to the current time.
+udev->last_busy is the field used for idle-delay calculations;
+updating it will cause any pending autosuspend to be moved back. Most
+of the usb_autopm_* routines will also set the last_busy field to the
+current time.
+
+Asynchronous operation is always subject to races. For example, a
+driver may call one of the usb_autopm_*_interface_async() routines at
+a time when the core has just finished deciding the device has been
+idle for long enough but not yet gotten around to calling the driver's
+suspend method. The suspend method must be responsible for
+synchronizing with the output request routine and the URB completion
+handler; it should cause autosuspends to fail with -EBUSY if the
+driver needs to use the device.
External suspend calls should never be allowed to fail in this way,
only autosuspend calls. The driver can tell them apart by checking
@@ -422,75 +443,23 @@ the PM_EVENT_AUTO bit in the message.event argument to the suspend
method; this bit will be set for internal PM events (autosuspend) and
clear for external PM events.
-Many of the ingredients in the autosuspend framework are oriented
-towards interfaces: The usb_interface structure contains the
-pm_usage_cnt field, and the usb_autopm_* routines take an interface
-pointer as their argument. But somewhat confusingly, a few of the
-pieces (i.e., usb_mark_last_busy()) use the usb_device structure
-instead. Drivers need to keep this straight; they can call
-interface_to_usbdev() to find the device structure for a given
-interface.
-
- Locking requirements
- --------------------
+ Mutual exclusion
+ ----------------
-All three suspend/resume methods are always called while holding the
-usb_device's PM mutex. For external events -- but not necessarily for
-autosuspend or autoresume -- the device semaphore (udev->dev.sem) will
-also be held. This implies that external suspend/resume events are
-mutually exclusive with calls to probe, disconnect, pre_reset, and
-post_reset; the USB core guarantees that this is true of internal
-suspend/resume events as well.
+For external events -- but not necessarily for autosuspend or
+autoresume -- the device semaphore (udev->dev.sem) will be held when a
+suspend or resume method is called. This implies that external
+suspend/resume events are mutually exclusive with calls to probe,
+disconnect, pre_reset, and post_reset; the USB core guarantees that
+this is true of autosuspend/autoresume events as well.
If a driver wants to block all suspend/resume calls during some
-critical section, it can simply acquire udev->pm_mutex. Note that
-calls to resume may be triggered indirectly. Block IO due to memory
-allocations can make the vm subsystem resume a device. Thus while
-holding this lock you must not allocate memory with GFP_KERNEL or
-GFP_NOFS.
-
-Alternatively, if the critical section might call some of the
-usb_autopm_* routines, the driver can avoid deadlock by doing:
-
- down(&udev->dev.sem);
- rc = usb_autopm_get_interface(intf);
-
-and at the end of the critical section:
-
- if (!rc)
- usb_autopm_put_interface(intf);
- up(&udev->dev.sem);
-
-Holding the device semaphore will block all external PM calls, and the
-usb_autopm_get_interface() will prevent any internal PM calls, even if
-it fails. (Exercise: Why?)
-
-The rules for locking order are:
-
- Never acquire any device semaphore while holding any PM mutex.
-
- Never acquire udev->pm_mutex while holding the PM mutex for
- a device that isn't a descendant of udev.
-
-In other words, PM mutexes should only be acquired going up the device
-tree, and they should be acquired only after locking all the device
-semaphores you need to hold. These rules don't matter to drivers very
-much; they usually affect just the USB core.
-
-Still, drivers do need to be careful. For example, many drivers use a
-private mutex to synchronize their normal I/O activities with their
-disconnect method. Now if the driver supports autosuspend then it
-must call usb_autopm_put_interface() from somewhere -- maybe from its
-close method. It should make the call while holding the private mutex,
-since a driver shouldn't call any of the usb_autopm_* functions for an
-interface from which it has been unbound.
-
-But the usb_autpm_* routines always acquire the device's PM mutex, and
-consequently the locking order has to be: private mutex first, PM
-mutex second. Since the suspend method is always called with the PM
-mutex held, it mustn't try to acquire the private mutex. It has to
-synchronize with the driver's I/O activities in some other way.
+critical section, the best way is to lock the device and call
+usb_autopm_get_interface() (and do the reverse at the end of the
+critical section). Holding the device semaphore will block all
+external PM calls, and the usb_autopm_get_interface() will prevent any
+internal PM calls, even if it fails. (Exercise: Why?)
Interaction between dynamic PM and system PM
@@ -499,22 +468,11 @@ synchronize with the driver's I/O activities in some other way.
Dynamic power management and system power management can interact in
a couple of ways.
-Firstly, a device may already be manually suspended or autosuspended
-when a system suspend occurs. Since system suspends are supposed to
-be as transparent as possible, the device should remain suspended
-following the system resume. The 2.6.23 kernel obeys this principle
-for manually suspended devices but not for autosuspended devices; they
-do get resumed when the system wakes up. (Presumably they will be
-autosuspended again after their idle-delay time expires.) In later
-kernels this behavior will be fixed.
-
-(There is an exception. If a device would undergo a reset-resume
-instead of a normal resume, and the device is enabled for remote
-wakeup, then the reset-resume takes place even if the device was
-already suspended when the system suspend began. The justification is
-that a reset-resume is a kind of remote-wakeup event. Or to put it
-another way, a device which needs a reset won't be able to generate
-normal remote-wakeup signals, so it ought to be resumed immediately.)
+Firstly, a device may already be autosuspended when a system suspend
+occurs. Since system suspends are supposed to be as transparent as
+possible, the device should remain suspended following the system
+resume. But this theory may not work out well in practice; over time
+the kernel's behavior in this regard has changed.
Secondly, a dynamic power-management event may occur as a system
suspend is underway. The window for this is short, since system
diff --git a/Documentation/usb/usb-serial.txt b/Documentation/usb/usb-serial.txt
index ff2c1ff57ba..5bd7926185e 100644
--- a/Documentation/usb/usb-serial.txt
+++ b/Documentation/usb/usb-serial.txt
@@ -83,7 +83,7 @@ HandSpring Visor, Palm USB, and Clié USB driver
parameters. e.g. modprobe visor vendor=0x54c product=0x66
There is a webpage and mailing lists for this portion of the driver at:
- http://usbvisor.sourceforge.net/
+ http://sourceforge.net/projects/usbvisor/
For any questions or problems with this driver, please contact Greg
Kroah-Hartman at greg@kroah.com
@@ -184,7 +184,7 @@ Keyspan USA-series Serial Adapters
functionality.
More information is available at:
- http://misc.nu/hugh/keyspan.html
+ http://www.carnationsoftware.com/carnation/Keyspan.html
For any questions or problems with this driver, please contact Hugh
Blemings at hugh@misc.nu
@@ -194,6 +194,10 @@ FTDI Single Port Serial Driver
This is a single port DB-25 serial adapter.
+ Devices supported include:
+ -TripNav TN-200 USB GPS
+ -Navis Engineering Bureau CH-4711 USB GPS
+
For any questions or problems with this driver, please contact Bill Ryder.
@@ -216,7 +220,7 @@ Cypress M8 CY4601 Family Serial Driver
Devices supported:
- -DeLorme's USB Earthmate (SiRF Star II lp arch)
+ -DeLorme's USB Earthmate GPS (SiRF Star II lp arch)
-Cypress HID->COM RS232 adapter
Note: Cypress Semiconductor claims no affiliation with the
@@ -392,9 +396,10 @@ REINER SCT cyberJack pinpad/e-com USB chipcard reader
Prolific PL2303 Driver
This driver supports any device that has the PL2303 chip from Prolific
- in it. This includes a number of single port USB to serial
- converters and USB GPS devices. Devices from Aten (the UC-232) and
- IO-Data work with this driver, as does the DCU-11 mobile-phone cable.
+ in it. This includes a number of single port USB to serial converters,
+ more than 70% of USB GPS devices (in 2010), and some USB UPSes. Devices
+ from Aten (the UC-232) and IO-Data work with this driver, as does
+ the DCU-11 mobile-phone cable.
For any questions or problems with this driver, please contact Greg
Kroah-Hartman at greg@kroah.com
@@ -435,6 +440,22 @@ Winchiphead CH341 Driver
For any questions or problems with this driver, please contact
frank@kingswood-consulting.co.uk.
+Moschip MCS7720, MCS7715 driver
+
+ These chips are present in devices sold by various manufacturers, such as Syba
+ and Cables Unlimited. There may be others. The 7720 provides two serial
+ ports, and the 7715 provides one serial and one standard PC parallel port.
+ Support for the 7715's parallel port is enabled by a separate option, which
+ will not appear unless parallel port support is first enabled at the top-level
+ of the Device Drivers config menu. Currently only compatibility mode is
+ supported on the parallel port (no ECP/EPP).
+
+ TODO:
+ - Implement ECP/EPP modes for the parallel port.
+ - Baud rates higher than 115200 are currently broken.
+ - Devices with a single serial port based on the Moschip MCS7703 may work
+ with this driver with a simple addition to the usb_device_id table. I
+ don't have one of these devices, so I can't say for sure.
Generic Serial driver
diff --git a/Documentation/video4linux/API.html b/Documentation/video4linux/API.html
index d749d41f647..d72fd2aa915 100644
--- a/Documentation/video4linux/API.html
+++ b/Documentation/video4linux/API.html
@@ -17,7 +17,7 @@
</tr>
<tr>
<td>
- <a href="http://www.linuxtv.org/downloads/video4linux/API/V4L2_API">V4L2 API</a>
+ <a href="http://v4l2spec.bytesex.org/spec-single/v4l2.html">V4L2 API</a>
</td>
<td>Should be used for new projects
</td>
diff --git a/Documentation/video4linux/CARDLIST.bttv b/Documentation/video4linux/CARDLIST.bttv
index f11c583295e..4739d568430 100644
--- a/Documentation/video4linux/CARDLIST.bttv
+++ b/Documentation/video4linux/CARDLIST.bttv
@@ -100,7 +100,7 @@
99 -> AD-TVK503
100 -> Hercules Smart TV Stereo
101 -> Pace TV & Radio Card
-102 -> IVC-200 [0000:a155,0001:a155,0002:a155,0003:a155,0100:a155,0101:a155,0102:a155,0103:a155]
+102 -> IVC-200 [0000:a155,0001:a155,0002:a155,0003:a155,0100:a155,0101:a155,0102:a155,0103:a155,0800:a155,0801:a155,0802:a155,0803:a155]
103 -> Grand X-Guard / Trust 814PCI [0304:0102]
104 -> Nebula Electronics DigiTV [0071:0101]
105 -> ProVideo PV143 [aa00:1430,aa00:1431,aa00:1432,aa00:1433,aa03:1433]
diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885
index 7539e8fa1ff..87c46347bd6 100644
--- a/Documentation/video4linux/CARDLIST.cx23885
+++ b/Documentation/video4linux/CARDLIST.cx23885
@@ -17,12 +17,13 @@
16 -> DVBWorld DVB-S2 2005 [0001:2005]
17 -> NetUP Dual DVB-S2 CI [1b55:2a2c]
18 -> Hauppauge WinTV-HVR1270 [0070:2211]
- 19 -> Hauppauge WinTV-HVR1275 [0070:2215]
- 20 -> Hauppauge WinTV-HVR1255 [0070:2251]
- 21 -> Hauppauge WinTV-HVR1210 [0070:2291,0070:2295]
+ 19 -> Hauppauge WinTV-HVR1275 [0070:2215,0070:221d,0070:22f2]
+ 20 -> Hauppauge WinTV-HVR1255 [0070:2251,0070:2259,0070:22f1]
+ 21 -> Hauppauge WinTV-HVR1210 [0070:2291,0070:2295,0070:2299,0070:229d,0070:22f0,0070:22f3,0070:22f4,0070:22f5]
22 -> Mygica X8506 DMB-TH [14f1:8651]
23 -> Magic-Pro ProHDTV Extreme 2 [14f1:8657]
24 -> Hauppauge WinTV-HVR1850 [0070:8541]
25 -> Compro VideoMate E800 [1858:e800]
26 -> Hauppauge WinTV-HVR1290 [0070:8551]
27 -> Mygica X8558 PRO DMB-TH [14f1:8578]
+ 28 -> LEADTEK WinFast PxTV1200 [107d:6f22]
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 7ec3c4e4b60..f2510541373 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -82,3 +82,4 @@
81 -> Leadtek WinFast DTV1800 Hybrid [107d:6654]
82 -> WinFast DTV2000 H rev. J [107d:6f2b]
83 -> Prof 7301 DVB-S/S2 [b034:3034]
+ 84 -> Samsung SMT 7020 DVB-S [18ac:dc00,18ac:dccd]
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index 0c166ff003a..5c568757c30 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -1,5 +1,5 @@
0 -> Unknown EM2800 video grabber (em2800) [eb1a:2800]
- 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2710,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2862,eb1a:2870,eb1a:2881,eb1a:2883,eb1a:2868]
+ 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2710,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2862,eb1a:2863,eb1a:2870,eb1a:2881,eb1a:2883,eb1a:2868]
2 -> Terratec Cinergy 250 USB (em2820/em2840) [0ccd:0036]
3 -> Pinnacle PCTV USB 2 (em2820/em2840) [2304:0208]
4 -> Hauppauge WinTV USB 2 (em2820/em2840) [2040:4200,2040:4201]
@@ -27,6 +27,7 @@
26 -> Hercules Smart TV USB 2.0 (em2820/em2840)
27 -> Pinnacle PCTV USB 2 (Philips FM1216ME) (em2820/em2840)
28 -> Leadtek Winfast USB II Deluxe (em2820/em2840)
+ 29 -> EM2860/TVP5150 Reference Design (em2860)
30 -> Videology 20K14XUSB USB2.0 (em2820/em2840)
31 -> Usbgear VD204v9 (em2821)
32 -> Supercomp USB 2.0 TV (em2821)
@@ -70,3 +71,5 @@
72 -> Gadmei UTV330+ (em2861)
73 -> Reddo DVB-C USB TV Box (em2870)
74 -> Actionmaster/LinXcel/Digitus VC211A (em2800)
+ 75 -> Dikom DK300 (em2882)
+ 76 -> KWorld PlusTV 340U or UB435-Q (ATSC) (em2870) [1b80:a340]
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index fce1e7eb047..4000c29fcfb 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -174,3 +174,9 @@
173 -> Zolid Hybrid TV Tuner PCI [1131:2004]
174 -> Asus Europa Hybrid OEM [1043:4847]
175 -> Leadtek Winfast DTV1000S [107d:6655]
+176 -> Beholder BeholdTV 505 RDS [0000:5051]
+177 -> Hawell HW-404M7
+178 -> Beholder BeholdTV H7 [5ace:7190]
+179 -> Beholder BeholdTV A7 [5ace:7090]
+180 -> Avermedia PCI M733A [1461:4155,1461:4255]
+181 -> TechoTrend TT-budget T-3000 [13c2:2804]
diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner
index e0d298fe883..e67c1db9685 100644
--- a/Documentation/video4linux/CARDLIST.tuner
+++ b/Documentation/video4linux/CARDLIST.tuner
@@ -81,3 +81,5 @@ tuner=80 - Philips FQ1216LME MK3 PAL/SECAM w/active loopthrough
tuner=81 - Partsnic (Daewoo) PTI-5NF05
tuner=82 - Philips CU1216L
tuner=83 - NXP TDA18271
+tuner=84 - Sony BTF-Pxn01Z
+tuner=85 - Philips FQ1236 MK5
diff --git a/Documentation/video4linux/CQcam.txt b/Documentation/video4linux/CQcam.txt
index d230878e473..8977e7ce4da 100644
--- a/Documentation/video4linux/CQcam.txt
+++ b/Documentation/video4linux/CQcam.txt
@@ -203,11 +203,11 @@ The V4L2 API spec:
http://v4l2spec.bytesex.org/
Some web pages about the quickcams:
- http://www.dkfz-heidelberg.de/Macromol/wedemann/mini-HOWTO-cqcam.html
+ http://www.pingouin-land.com/howto/QuickCam-HOWTO.html
http://www.crynwr.com/qcpc/ QuickCam Third-Party Drivers
http://www.crynwr.com/qcpc/re.html Some Reverse Engineering
- http://cse.unl.edu/~cluening/gqcam/ v4l client
+ http://www.wirelesscouch.net/software/gqcam/ v4l client
http://phobos.illtel.denver.co.us/pub/qcread/ doesn't use v4l
ftp://ftp.cs.unm.edu/pub/chris/quickcam/ Has lots of drivers
http://www.cs.duke.edu/~reynolds/quickcam/ Has lots of information
diff --git a/Documentation/video4linux/README.cpia b/Documentation/video4linux/README.cpia
index 19cd3bf2498..8a747fee661 100644
--- a/Documentation/video4linux/README.cpia
+++ b/Documentation/video4linux/README.cpia
@@ -185,7 +185,7 @@ THANKS (in no particular order):
---------------------------------------------------------------------------
REFERENCES
- 1. http://www.risc.uni-linz.ac.at/people/ppregler
+ 1. http://www.risc.uni-linz.ac.at/
mailto:Peter_Pregler@email.com
2. see the file COPYING in the top directory of the kernel tree
3. http://webcam.sourceforge.net/
diff --git a/Documentation/video4linux/README.ivtv b/Documentation/video4linux/README.ivtv
index 73df22c40bf..42b06686eb7 100644
--- a/Documentation/video4linux/README.ivtv
+++ b/Documentation/video4linux/README.ivtv
@@ -10,7 +10,7 @@ Hauppauge PVR-350.
NOTE: this driver requires the latest encoder firmware (version 2.06.039, size
376836 bytes). Get the firmware from here:
-http://dl.ivtvdriver.org/ivtv/firmware/firmware.tar.gz
+http://dl.ivtvdriver.org/ivtv/firmware/
NOTE: 'normal' TV applications do not work with this driver, you need
an application that can handle MPEG input such as mplayer, xine, MythTV,
diff --git a/Documentation/video4linux/README.tlg2300 b/Documentation/video4linux/README.tlg2300
new file mode 100644
index 00000000000..416ccb93d8c
--- /dev/null
+++ b/Documentation/video4linux/README.tlg2300
@@ -0,0 +1,47 @@
+tlg2300 release notes
+====================
+
+This is a v4l2/dvb device driver for the tlg2300 chip.
+
+
+current status
+==============
+
+video
+ - support mmap and read().(no overlay)
+
+audio
+ - The driver will register a ALSA card for the audio input.
+
+vbi
+ - Works for almost TV norms.
+
+dvb-t
+ - works for DVB-T
+
+FM
+ - Works for radio.
+
+---------------------------------------------------------------------------
+TESTED APPLICATIONS:
+
+-VLC1.0.4 test the video and dvb. The GUI is friendly to use.
+
+-Mplayer test the video.
+
+-Mplayer test the FM. The mplayer should be compiled with --enable-radio and
+ --enable-radio-capture.
+ The command runs as this(The alsa audio registers to card 1):
+ #mplayer radio://103.7/capture/ -radio adevice=hw=1,0:arate=48000 \
+ -rawaudio rate=48000:channels=2
+
+---------------------------------------------------------------------------
+KNOWN PROBLEMS:
+about preemphasis:
+ You can set the preemphasis for radio by the following command:
+ #v4l2-ctl -d /dev/radio0 --set-ctrl=pre_emphasis_settings=1
+
+ "pre_emphasis_settings=1" means that you select the 50us. If you want
+ to select the 75us, please use "pre_emphasis_settings=2"
+
+
diff --git a/Documentation/video4linux/Zoran b/Documentation/video4linux/Zoran
index 0e89e767629..00e3f926781 100644
--- a/Documentation/video4linux/Zoran
+++ b/Documentation/video4linux/Zoran
@@ -174,7 +174,7 @@ and is used in Argentinia, Uruguay, an a few others
We do not talk about how the audio is broadcast !
A rather good sites about the TV standards are:
-http://www.sony.jp/ServiceArea/Voltage_map/
+http://www.sony.jp/support/
http://info.electronicwerkstatt.de/bereiche/fernsehtechnik/frequenzen_und_normen/Fernsehnormen/
and http://www.cabl.com/restaurant/channel.html
@@ -330,7 +330,7 @@ These extensions are known as the v4l/mjpeg extensions. See zoran.h for
details (structs/ioctls).
Information - video4linux:
-http://roadrunner.swansea.linux.org.uk/v4lapi.shtml
+http://linux.bytesex.org/v4l2/API.html
Documentation/video4linux/API.html
/usr/include/linux/videodev.h
@@ -390,7 +390,7 @@ BUZIOC_G_STATUS
Get the status of the input lines (video source connected/norm).
For programming example, please, look at lavrec.c and lavplay.c code in
-lavtools-1.2p2 package (URL: http://www.cicese.mx/~mirsev/DC10plus/)
+lavtools-1.2p2 package (URL: http://www.cicese.mx/)
and the 'examples' directory in the original Buz driver distribution.
Additional notes for software developers:
diff --git a/Documentation/video4linux/bttv/Cards b/Documentation/video4linux/bttv/Cards
index d3389655ad9..12217fc4972 100644
--- a/Documentation/video4linux/bttv/Cards
+++ b/Documentation/video4linux/bttv/Cards
@@ -802,7 +802,7 @@ Kworld (www.kworld.com.tw)
-JTT/ Justy Corp.http://www.justy.co.jp/ (www.jtt.com.jp website down)
+JTT/ Justy Corp.(http://www.jtt.ne.jp/)
---------------------------------------------------------------------
JTT-02 (JTT TV) "TV watchmate pro" (bt848)
@@ -828,7 +828,7 @@ Eline www.eline-net.com/
Eline Vision TVMaster / TVMaster FM (ELV-TVM/ ELV-TVM-FM) = LR26 (bt878)
Eline Vision TVMaster-2000 (ELV-TVM-2000, ELV-TVM-2000-FM)= LR138 (saa713x)
-Spirit http://www.spiritmodems.com.au/
+Spirit
------
Spirit TV Tuner/Video Capture Card (bt848)
@@ -959,6 +959,6 @@ Asus www.asuscom.com
Hoontech
--------
-http://www.hoontech.com/korean/download/down_driver_list03.html
+http://www.hoontech.de/
HART Vision 848 (H-ART Vision 848)
HART Vision 878 (H-Art Vision 878)
diff --git a/Documentation/video4linux/bttv/MAKEDEV b/Documentation/video4linux/bttv/MAKEDEV
index 6c29ba43b6c..9d112f7fd5f 100644
--- a/Documentation/video4linux/bttv/MAKEDEV
+++ b/Documentation/video4linux/bttv/MAKEDEV
@@ -14,7 +14,7 @@ function makedev () {
ln -s /dev/${1}0 /dev/$1
}
-# see http://roadrunner.swansea.uk.linux.org/v4lapi.shtml
+# see http://linux.bytesex.org/v4l2/API.html
echo "*** new device names ***"
makedev video 0
diff --git a/Documentation/video4linux/bttv/Specs b/Documentation/video4linux/bttv/Specs
index 79b9e576fe7..f32466cdae0 100644
--- a/Documentation/video4linux/bttv/Specs
+++ b/Documentation/video4linux/bttv/Specs
@@ -1,3 +1,3 @@
Philips http://www.Semiconductors.COM/pip/
-Conexant http://www.conexant.com/techinfo/default.asp
-Micronas http://www.micronas.de/pages/product_documentation/index.html
+Conexant http://www.conexant.com/
+Micronas http://www.micronas.com/en/home/index.html
diff --git a/Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt b/Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt
index faccee68f60..f4329a38878 100644
--- a/Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt
+++ b/Documentation/video4linux/cx88/hauppauge-wintv-cx88-ir.txt
@@ -44,7 +44,7 @@ http://www.atmel.com/dyn/resources/prod_documents/doc2817.pdf
This data sheet (google search) seems to have a lovely description of the
RC5 basics
-http://users.pandora.be/nenya/electronics/rc5/ and more data
+http://www.nenya.be/beor/electronics/rc5.htm and more data
http://www.ee.washington.edu/circuit_archive/text/ir_decode.txt
and even a reference to how to decode a bi-phase data stream.
diff --git a/Documentation/video4linux/extract_xc3028.pl b/Documentation/video4linux/extract_xc3028.pl
index 2cb816047fc..47877deae6d 100644
--- a/Documentation/video4linux/extract_xc3028.pl
+++ b/Documentation/video4linux/extract_xc3028.pl
@@ -5,12 +5,18 @@
#
# In order to use, you need to:
# 1) Download the windows driver with something like:
+# Version 2.4
+# wget http://www.twinhan.com/files/AW/BDA T/20080303_V1.0.6.7.zip
+# or wget http://www.stefanringel.de/pub/20080303_V1.0.6.7.zip
+# Version 2.7
# wget http://www.steventoth.net/linux/xc5000/HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip
-# 2) Extract the file hcw85bda.sys from the zip into the current dir:
+# 2) Extract the files from the zip into the current dir:
+# unzip -j 20080303_V1.0.6.7.zip 20080303_v1.0.6.7/UDXTTM6000.sys
# unzip -j HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip Driver85/hcw85bda.sys
# 3) run the script:
# ./extract_xc3028.pl
-# 4) copy the generated file:
+# 4) copy the generated files:
+# cp xc3028-v24.fw /lib/firmware
# cp xc3028-v27.fw /lib/firmware
#use strict;
@@ -135,7 +141,7 @@ sub write_hunk_fix_endian($$)
}
}
-sub main_firmware($$$$)
+sub main_firmware_24($$$$)
{
my $out;
my $j=0;
@@ -146,8 +152,774 @@ sub main_firmware($$$$)
for ($j = length($name); $j <32; $j++) {
$name = $name.chr(0);
+ }
+
+ open OUTFILE, ">$outfile";
+ syswrite(OUTFILE, $name);
+ write_le16($version);
+ write_le16($nr_desc);
+
+ #
+ # Firmware 0, type: BASE FW F8MHZ (0x00000003), id: (0000000000000000), size: 6635
+ #
+
+ write_le32(0x00000003); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(6635); # Size
+ write_hunk_fix_endian(257752, 6635);
+
+ #
+ # Firmware 1, type: BASE FW F8MHZ MTS (0x00000007), id: (0000000000000000), size: 6635
+ #
+
+ write_le32(0x00000007); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(6635); # Size
+ write_hunk_fix_endian(264392, 6635);
+
+ #
+ # Firmware 2, type: BASE FW FM (0x00000401), id: (0000000000000000), size: 6525
+ #
+
+ write_le32(0x00000401); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(6525); # Size
+ write_hunk_fix_endian(271040, 6525);
+
+ #
+ # Firmware 3, type: BASE FW FM INPUT1 (0x00000c01), id: (0000000000000000), size: 6539
+ #
+
+ write_le32(0x00000c01); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(6539); # Size
+ write_hunk_fix_endian(277568, 6539);
+
+ #
+ # Firmware 4, type: BASE FW (0x00000001), id: (0000000000000000), size: 6633
+ #
+
+ write_le32(0x00000001); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(6633); # Size
+ write_hunk_fix_endian(284120, 6633);
+
+ #
+ # Firmware 5, type: BASE FW MTS (0x00000005), id: (0000000000000000), size: 6617
+ #
+
+ write_le32(0x00000005); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(6617); # Size
+ write_hunk_fix_endian(290760, 6617);
+
+ #
+ # Firmware 6, type: STD FW (0x00000000), id: PAL/BG A2/A (0000000100000007), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x00000001, 0x00000007); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(297384, 161);
+
+ #
+ # Firmware 7, type: STD FW MTS (0x00000004), id: PAL/BG A2/A (0000000100000007), size: 169
+ #
+
+ write_le32(0x00000004); # Type
+ write_le64(0x00000001, 0x00000007); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(297552, 169);
+
+ #
+ # Firmware 8, type: STD FW (0x00000000), id: PAL/BG A2/B (0000000200000007), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x00000002, 0x00000007); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(297728, 161);
+
+ #
+ # Firmware 9, type: STD FW MTS (0x00000004), id: PAL/BG A2/B (0000000200000007), size: 169
+ #
+
+ write_le32(0x00000004); # Type
+ write_le64(0x00000002, 0x00000007); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(297896, 169);
+
+ #
+ # Firmware 10, type: STD FW (0x00000000), id: PAL/BG NICAM/A (0000000400000007), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x00000004, 0x00000007); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(298072, 161);
+
+ #
+ # Firmware 11, type: STD FW MTS (0x00000004), id: PAL/BG NICAM/A (0000000400000007), size: 169
+ #
+
+ write_le32(0x00000004); # Type
+ write_le64(0x00000004, 0x00000007); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(298240, 169);
+
+ #
+ # Firmware 12, type: STD FW (0x00000000), id: PAL/BG NICAM/B (0000000800000007), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x00000008, 0x00000007); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(298416, 161);
+
+ #
+ # Firmware 13, type: STD FW MTS (0x00000004), id: PAL/BG NICAM/B (0000000800000007), size: 169
+ #
+
+ write_le32(0x00000004); # Type
+ write_le64(0x00000008, 0x00000007); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(298584, 169);
+
+ #
+ # Firmware 14, type: STD FW (0x00000000), id: PAL/DK A2 (00000003000000e0), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x00000003, 0x000000e0); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(298760, 161);
+
+ #
+ # Firmware 15, type: STD FW MTS (0x00000004), id: PAL/DK A2 (00000003000000e0), size: 169
+ #
+
+ write_le32(0x00000004); # Type
+ write_le64(0x00000003, 0x000000e0); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(298928, 169);
+
+ #
+ # Firmware 16, type: STD FW (0x00000000), id: PAL/DK NICAM (0000000c000000e0), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x0000000c, 0x000000e0); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(299104, 161);
+
+ #
+ # Firmware 17, type: STD FW MTS (0x00000004), id: PAL/DK NICAM (0000000c000000e0), size: 169
+ #
+
+ write_le32(0x00000004); # Type
+ write_le64(0x0000000c, 0x000000e0); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(299272, 169);
+
+ #
+ # Firmware 18, type: STD FW (0x00000000), id: SECAM/K1 (0000000000200000), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x00000000, 0x00200000); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(299448, 161);
+
+ #
+ # Firmware 19, type: STD FW MTS (0x00000004), id: SECAM/K1 (0000000000200000), size: 169
+ #
+
+ write_le32(0x00000004); # Type
+ write_le64(0x00000000, 0x00200000); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(299616, 169);
+
+ #
+ # Firmware 20, type: STD FW (0x00000000), id: SECAM/K3 (0000000004000000), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x00000000, 0x04000000); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(299792, 161);
+
+ #
+ # Firmware 21, type: STD FW MTS (0x00000004), id: SECAM/K3 (0000000004000000), size: 169
+ #
+
+ write_le32(0x00000004); # Type
+ write_le64(0x00000000, 0x04000000); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(299960, 169);
+
+ #
+ # Firmware 22, type: STD FW D2633 DTV6 ATSC (0x00010030), id: (0000000000000000), size: 149
+ #
+
+ write_le32(0x00010030); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(149); # Size
+ write_hunk_fix_endian(300136, 149);
+
+ #
+ # Firmware 23, type: STD FW D2620 DTV6 QAM (0x00000068), id: (0000000000000000), size: 149
+ #
+
+ write_le32(0x00000068); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(149); # Size
+ write_hunk_fix_endian(300296, 149);
+
+ #
+ # Firmware 24, type: STD FW D2633 DTV6 QAM (0x00000070), id: (0000000000000000), size: 149
+ #
+
+ write_le32(0x00000070); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(149); # Size
+ write_hunk_fix_endian(300448, 149);
+
+ #
+ # Firmware 25, type: STD FW D2620 DTV7 (0x00000088), id: (0000000000000000), size: 149
+ #
+
+ write_le32(0x00000088); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(149); # Size
+ write_hunk_fix_endian(300608, 149);
+
+ #
+ # Firmware 26, type: STD FW D2633 DTV7 (0x00000090), id: (0000000000000000), size: 149
+ #
+
+ write_le32(0x00000090); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(149); # Size
+ write_hunk_fix_endian(300760, 149);
+
+ #
+ # Firmware 27, type: STD FW D2620 DTV78 (0x00000108), id: (0000000000000000), size: 149
+ #
+
+ write_le32(0x00000108); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(149); # Size
+ write_hunk_fix_endian(300920, 149);
+
+ #
+ # Firmware 28, type: STD FW D2633 DTV78 (0x00000110), id: (0000000000000000), size: 149
+ #
+
+ write_le32(0x00000110); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(149); # Size
+ write_hunk_fix_endian(301072, 149);
+
+ #
+ # Firmware 29, type: STD FW D2620 DTV8 (0x00000208), id: (0000000000000000), size: 149
+ #
+
+ write_le32(0x00000208); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(149); # Size
+ write_hunk_fix_endian(301232, 149);
+
+ #
+ # Firmware 30, type: STD FW D2633 DTV8 (0x00000210), id: (0000000000000000), size: 149
+ #
+
+ write_le32(0x00000210); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(149); # Size
+ write_hunk_fix_endian(301384, 149);
+
+ #
+ # Firmware 31, type: STD FW FM (0x00000400), id: (0000000000000000), size: 135
+ #
+
+ write_le32(0x00000400); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le32(135); # Size
+ write_hunk_fix_endian(301554, 135);
+
+ #
+ # Firmware 32, type: STD FW (0x00000000), id: PAL/I (0000000000000010), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x00000000, 0x00000010); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(301688, 161);
+
+ #
+ # Firmware 33, type: STD FW MTS (0x00000004), id: PAL/I (0000000000000010), size: 169
+ #
+
+ write_le32(0x00000004); # Type
+ write_le64(0x00000000, 0x00000010); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(301856, 169);
+
+ #
+ # Firmware 34, type: STD FW (0x00000000), id: SECAM/L AM (0000001000400000), size: 169
+ #
+
+ #
+ # Firmware 35, type: STD FW (0x00000000), id: SECAM/L NICAM (0000000c00400000), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x0000000c, 0x00400000); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(302032, 161);
+
+ #
+ # Firmware 36, type: STD FW (0x00000000), id: SECAM/Lc (0000000000800000), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x00000000, 0x00800000); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(302200, 161);
+
+ #
+ # Firmware 37, type: STD FW (0x00000000), id: NTSC/M Kr (0000000000008000), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x00000000, 0x00008000); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(302368, 161);
+
+ #
+ # Firmware 38, type: STD FW LCD (0x00001000), id: NTSC/M Kr (0000000000008000), size: 161
+ #
+
+ write_le32(0x00001000); # Type
+ write_le64(0x00000000, 0x00008000); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(302536, 161);
+
+ #
+ # Firmware 39, type: STD FW LCD NOGD (0x00003000), id: NTSC/M Kr (0000000000008000), size: 161
+ #
+
+ write_le32(0x00003000); # Type
+ write_le64(0x00000000, 0x00008000); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(302704, 161);
+
+ #
+ # Firmware 40, type: STD FW MTS (0x00000004), id: NTSC/M Kr (0000000000008000), size: 169
+ #
+
+ write_le32(0x00000004); # Type
+ write_le64(0x00000000, 0x00008000); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(302872, 169);
+
+ #
+ # Firmware 41, type: STD FW (0x00000000), id: NTSC PAL/M PAL/N (000000000000b700), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x00000000, 0x0000b700); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(303048, 161);
+
+ #
+ # Firmware 42, type: STD FW LCD (0x00001000), id: NTSC PAL/M PAL/N (000000000000b700), size: 161
+ #
+
+ write_le32(0x00001000); # Type
+ write_le64(0x00000000, 0x0000b700); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(303216, 161);
+
+ #
+ # Firmware 43, type: STD FW LCD NOGD (0x00003000), id: NTSC PAL/M PAL/N (000000000000b700), size: 161
+ #
+
+ write_le32(0x00003000); # Type
+ write_le64(0x00000000, 0x0000b700); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(303384, 161);
+
+ #
+ # Firmware 44, type: STD FW (0x00000000), id: NTSC/M Jp (0000000000002000), size: 161
+ #
+
+ write_le32(0x00000000); # Type
+ write_le64(0x00000000, 0x00002000); # ID
+ write_le32(161); # Size
+ write_hunk_fix_endian(303552, 161);
+
+ #
+ # Firmware 45, type: STD FW MTS (0x00000004), id: NTSC PAL/M PAL/N (000000000000b700), size: 169
+ #
+
+ write_le32(0x00000004); # Type
+ write_le64(0x00000000, 0x0000b700); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(303720, 169);
+
+ #
+ # Firmware 46, type: STD FW MTS LCD (0x00001004), id: NTSC PAL/M PAL/N (000000000000b700), size: 169
+ #
+
+ write_le32(0x00001004); # Type
+ write_le64(0x00000000, 0x0000b700); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(303896, 169);
+
+ #
+ # Firmware 47, type: STD FW MTS LCD NOGD (0x00003004), id: NTSC PAL/M PAL/N (000000000000b700), size: 169
+ #
+
+ write_le32(0x00003004); # Type
+ write_le64(0x00000000, 0x0000b700); # ID
+ write_le32(169); # Size
+ write_hunk_fix_endian(304072, 169);
+
+ #
+ # Firmware 48, type: SCODE FW HAS IF (0x60000000), IF = 3.28 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(3280); # IF
+ write_le32(192); # Size
+ write_hunk(309048, 192);
+
+ #
+ # Firmware 49, type: SCODE FW HAS IF (0x60000000), IF = 3.30 MHz id: (0000000000000000), size: 192
+ #
+
+# write_le32(0x60000000); # Type
+# write_le64(0x00000000, 0x00000000); # ID
+# write_le16(3300); # IF
+# write_le32(192); # Size
+# write_hunk(304440, 192);
+
+ #
+ # Firmware 50, type: SCODE FW HAS IF (0x60000000), IF = 3.44 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(3440); # IF
+ write_le32(192); # Size
+ write_hunk(309432, 192);
+
+ #
+ # Firmware 51, type: SCODE FW HAS IF (0x60000000), IF = 3.46 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(3460); # IF
+ write_le32(192); # Size
+ write_hunk(309624, 192);
+
+ #
+ # Firmware 52, type: SCODE FW DTV6 ATSC OREN36 HAS IF (0x60210020), IF = 3.80 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60210020); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(3800); # IF
+ write_le32(192); # Size
+ write_hunk(306936, 192);
+
+ #
+ # Firmware 53, type: SCODE FW HAS IF (0x60000000), IF = 4.00 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(4000); # IF
+ write_le32(192); # Size
+ write_hunk(309240, 192);
+
+ #
+ # Firmware 54, type: SCODE FW DTV6 ATSC TOYOTA388 HAS IF (0x60410020), IF = 4.08 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60410020); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(4080); # IF
+ write_le32(192); # Size
+ write_hunk(307128, 192);
+
+ #
+ # Firmware 55, type: SCODE FW HAS IF (0x60000000), IF = 4.20 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(4200); # IF
+ write_le32(192); # Size
+ write_hunk(308856, 192);
+
+ #
+ # Firmware 56, type: SCODE FW MONO HAS IF (0x60008000), IF = 4.32 MHz id: NTSC/M Kr (0000000000008000), size: 192
+ #
+
+ write_le32(0x60008000); # Type
+ write_le64(0x00000000, 0x00008000); # ID
+ write_le16(4320); # IF
+ write_le32(192); # Size
+ write_hunk(305208, 192);
+
+ #
+ # Firmware 57, type: SCODE FW HAS IF (0x60000000), IF = 4.45 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(4450); # IF
+ write_le32(192); # Size
+ write_hunk(309816, 192);
+
+ #
+ # Firmware 58, type: SCODE FW MTS LCD NOGD MONO IF HAS IF (0x6002b004), IF = 4.50 MHz id: NTSC PAL/M PAL/N (000000000000b700), size: 192
+ #
+
+ write_le32(0x6002b004); # Type
+ write_le64(0x00000000, 0x0000b700); # ID
+ write_le16(4500); # IF
+ write_le32(192); # Size
+ write_hunk(304824, 192);
+
+ #
+ # Firmware 59, type: SCODE FW LCD NOGD IF HAS IF (0x60023000), IF = 4.60 MHz id: NTSC/M Kr (0000000000008000), size: 192
+ #
+
+ write_le32(0x60023000); # Type
+ write_le64(0x00000000, 0x00008000); # ID
+ write_le16(4600); # IF
+ write_le32(192); # Size
+ write_hunk(305016, 192);
+
+ #
+ # Firmware 60, type: SCODE FW DTV6 QAM DTV7 DTV78 DTV8 ZARLINK456 HAS IF (0x620003e0), IF = 4.76 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x620003e0); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(4760); # IF
+ write_le32(192); # Size
+ write_hunk(304440, 192);
+
+ #
+ # Firmware 61, type: SCODE FW HAS IF (0x60000000), IF = 4.94 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(4940); # IF
+ write_le32(192); # Size
+ write_hunk(308664, 192);
+
+ #
+ # Firmware 62, type: SCODE FW HAS IF (0x60000000), IF = 5.26 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(5260); # IF
+ write_le32(192); # Size
+ write_hunk(307704, 192);
+
+ #
+ # Firmware 63, type: SCODE FW MONO HAS IF (0x60008000), IF = 5.32 MHz id: PAL/BG A2 NICAM (0000000f00000007), size: 192
+ #
+
+ write_le32(0x60008000); # Type
+ write_le64(0x0000000f, 0x00000007); # ID
+ write_le16(5320); # IF
+ write_le32(192); # Size
+ write_hunk(307896, 192);
+
+ #
+ # Firmware 64, type: SCODE FW DTV7 DTV78 DTV8 DIBCOM52 CHINA HAS IF (0x65000380), IF = 5.40 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x65000380); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(5400); # IF
+ write_le32(192); # Size
+ write_hunk(304248, 192);
+
+ #
+ # Firmware 65, type: SCODE FW DTV6 ATSC OREN538 HAS IF (0x60110020), IF = 5.58 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60110020); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(5580); # IF
+ write_le32(192); # Size
+ write_hunk(306744, 192);
+
+ #
+ # Firmware 66, type: SCODE FW HAS IF (0x60000000), IF = 5.64 MHz id: PAL/BG A2 (0000000300000007), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000003, 0x00000007); # ID
+ write_le16(5640); # IF
+ write_le32(192); # Size
+ write_hunk(305592, 192);
+
+ #
+ # Firmware 67, type: SCODE FW HAS IF (0x60000000), IF = 5.74 MHz id: PAL/BG NICAM (0000000c00000007), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x0000000c, 0x00000007); # ID
+ write_le16(5740); # IF
+ write_le32(192); # Size
+ write_hunk(305784, 192);
+
+ #
+ # Firmware 68, type: SCODE FW HAS IF (0x60000000), IF = 5.90 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(5900); # IF
+ write_le32(192); # Size
+ write_hunk(307512, 192);
+
+ #
+ # Firmware 69, type: SCODE FW MONO HAS IF (0x60008000), IF = 6.00 MHz id: PAL/DK PAL/I SECAM/K3 SECAM/L SECAM/Lc NICAM (0000000c04c000f0), size: 192
+ #
+
+ write_le32(0x60008000); # Type
+ write_le64(0x0000000c, 0x04c000f0); # ID
+ write_le16(6000); # IF
+ write_le32(192); # Size
+ write_hunk(305576, 192);
+
+ #
+ # Firmware 70, type: SCODE FW DTV6 QAM ATSC LG60 F6MHZ HAS IF (0x68050060), IF = 6.20 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x68050060); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(6200); # IF
+ write_le32(192); # Size
+ write_hunk(306552, 192);
+
+ #
+ # Firmware 71, type: SCODE FW HAS IF (0x60000000), IF = 6.24 MHz id: PAL/I (0000000000000010), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000000, 0x00000010); # ID
+ write_le16(6240); # IF
+ write_le32(192); # Size
+ write_hunk(305400, 192);
+
+ #
+ # Firmware 72, type: SCODE FW MONO HAS IF (0x60008000), IF = 6.32 MHz id: SECAM/K1 (0000000000200000), size: 192
+ #
+
+ write_le32(0x60008000); # Type
+ write_le64(0x00000000, 0x00200000); # ID
+ write_le16(6320); # IF
+ write_le32(192); # Size
+ write_hunk(308472, 192);
+
+ #
+ # Firmware 73, type: SCODE FW HAS IF (0x60000000), IF = 6.34 MHz id: SECAM/K1 (0000000000200000), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000000, 0x00200000); # ID
+ write_le16(6340); # IF
+ write_le32(192); # Size
+ write_hunk(306360, 192);
+
+ #
+ # Firmware 74, type: SCODE FW MONO HAS IF (0x60008000), IF = 6.50 MHz id: PAL/DK SECAM/K3 SECAM/L NICAM (0000000c044000e0), size: 192
+ #
+
+ write_le32(0x60008000); # Type
+ write_le64(0x0000000c, 0x044000e0); # ID
+ write_le16(6500); # IF
+ write_le32(192); # Size
+ write_hunk(308280, 192);
+
+ #
+ # Firmware 75, type: SCODE FW DTV6 ATSC ATI638 HAS IF (0x60090020), IF = 6.58 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60090020); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(6580); # IF
+ write_le32(192); # Size
+ write_hunk(304632, 192);
+
+ #
+ # Firmware 76, type: SCODE FW HAS IF (0x60000000), IF = 6.60 MHz id: PAL/DK A2 (00000003000000e0), size: 192
+ #
+
+ write_le32(0x60000000); # Type
+ write_le64(0x00000003, 0x000000e0); # ID
+ write_le16(6600); # IF
+ write_le32(192); # Size
+ write_hunk(306168, 192);
+
+ #
+ # Firmware 77, type: SCODE FW MONO HAS IF (0x60008000), IF = 6.68 MHz id: PAL/DK A2 (00000003000000e0), size: 192
+ #
+
+ write_le32(0x60008000); # Type
+ write_le64(0x00000003, 0x000000e0); # ID
+ write_le16(6680); # IF
+ write_le32(192); # Size
+ write_hunk(308088, 192);
+
+ #
+ # Firmware 78, type: SCODE FW DTV6 ATSC TOYOTA794 HAS IF (0x60810020), IF = 8.14 MHz id: (0000000000000000), size: 192
+ #
+
+ write_le32(0x60810020); # Type
+ write_le64(0x00000000, 0x00000000); # ID
+ write_le16(8140); # IF
+ write_le32(192); # Size
+ write_hunk(307320, 192);
+
+ #
+ # Firmware 79, type: SCODE FW HAS IF (0x60000000), IF = 8.20 MHz id: (0000000000000000), size: 192
+ #
+
+# write_le32(0x60000000); # Type
+# write_le64(0x00000000, 0x00000000); # ID
+# write_le16(8200); # IF
+# write_le32(192); # Size
+# write_hunk(308088, 192);
}
+sub main_firmware_27($$$$)
+{
+ my $out;
+ my $j=0;
+ my $outfile = shift;
+ my $name = shift;
+ my $version = shift;
+ my $nr_desc = shift;
+
+ for ($j = length($name); $j <32; $j++) {
+ $name = $name.chr(0);
+ }
+
open OUTFILE, ">$outfile";
syswrite(OUTFILE, $name);
write_le16($version);
@@ -906,20 +1678,39 @@ sub main_firmware($$$$)
write_hunk(812856, 192);
}
+
sub extract_firmware {
- my $sourcefile = "hcw85bda.sys";
- my $hash = "0e44dbf63bb0169d57446aec21881ff2";
- my $outfile = "xc3028-v27.fw";
- my $name = "xc2028 firmware";
- my $version = 519;
- my $nr_desc = 80;
+ my $sourcefile_24 = "UDXTTM6000.sys";
+ my $hash_24 = "cb9deb5508a5e150af2880f5b0066d78";
+ my $outfile_24 = "xc3028-v24.fw";
+ my $name_24 = "xc2028 firmware";
+ my $version_24 = 516;
+ my $nr_desc_24 = 77;
+ my $out;
+
+ my $sourcefile_27 = "hcw85bda.sys";
+ my $hash_27 = "0e44dbf63bb0169d57446aec21881ff2";
+ my $outfile_27 = "xc3028-v27.fw";
+ my $name_27 = "xc2028 firmware";
+ my $version_27 = 519;
+ my $nr_desc_27 = 80;
my $out;
- verify($sourcefile, $hash);
+ if (-e $sourcefile_24) {
+ verify($sourcefile_24, $hash_24);
+
+ open INFILE, "<$sourcefile_24";
+ main_firmware_24($outfile_24, $name_24, $version_24, $nr_desc_24);
+ close INFILE;
+ }
- open INFILE, "<$sourcefile";
- main_firmware($outfile, $name, $version, $nr_desc);
- close INFILE;
+ if (-e $sourcefile_27) {
+ verify($sourcefile_27, $hash_27);
+
+ open INFILE, "<$sourcefile_27";
+ main_firmware_27($outfile_27, $name_27, $version_27, $nr_desc_27);
+ close INFILE;
+ }
}
extract_firmware;
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 1800a62cf13..56ba7bba716 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -29,8 +29,12 @@ zc3xx 041e:4029 Creative WebCam Vista Pro
zc3xx 041e:4034 Creative Instant P0620
zc3xx 041e:4035 Creative Instant P0620D
zc3xx 041e:4036 Creative Live !
+sq930x 041e:4038 Creative Joy-IT
zc3xx 041e:403a Creative Nx Pro 2
spca561 041e:403b Creative Webcam Vista (VF0010)
+sq930x 041e:403c Creative Live! Ultra
+sq930x 041e:403d Creative Live! Ultra for Notebooks
+sq930x 041e:4041 Creative Live! Motion
zc3xx 041e:4051 Creative Live!Cam Notebook Pro (VF0250)
ov519 041e:4052 Creative Live! VISTA IM
zc3xx 041e:4053 Creative Live!Cam Video IM
@@ -42,6 +46,7 @@ ov519 041e:4064 Creative Live! VISTA VF0420
ov519 041e:4067 Creative Live! Cam Video IM (VF0350)
ov519 041e:4068 Creative Live! VISTA VF0470
spca561 0458:7004 Genius VideoCAM Express V2
+sn9c2028 0458:7005 Genius Smart 300, version 2
sunplus 0458:7006 Genius Dsc 1.3 Smart
zc3xx 0458:7007 Genius VideoCam V2
zc3xx 0458:700c Genius VideoCam V3
@@ -49,6 +54,8 @@ zc3xx 0458:700f Genius VideoCam Web V2
sonixj 0458:7025 Genius Eye 311Q
sn9c20x 0458:7029 Genius Look 320s
sonixj 0458:702e Genius Slim 310 NB
+sn9c20x 0458:704a Genius Slim 1320
+sn9c20x 0458:704c Genius i-Look 1321
sn9c20x 045e:00f4 LifeCam VX-6000 (SN9C20x + OV9650)
sonixj 045e:00f5 MicroSoft VX3000
sonixj 045e:00f7 MicroSoft VX1000
@@ -109,6 +116,7 @@ sunplus 04a5:3003 Benq DC 1300
sunplus 04a5:3008 Benq DC 1500
sunplus 04a5:300a Benq DC 3410
spca500 04a5:300c Benq DC 1016
+benq 04a5:3035 Benq DC E300
finepix 04cb:0104 Fujifilm FinePix 4800
finepix 04cb:0109 Fujifilm FinePix A202
finepix 04cb:010b Fujifilm FinePix A203
@@ -134,6 +142,7 @@ finepix 04cb:013d Fujifilm FinePix unknown model
finepix 04cb:013f Fujifilm FinePix F420
sunplus 04f1:1001 JVC GC A50
spca561 04fc:0561 Flexcam 100
+spca1528 04fc:1528 Sunplus MD80 clone
sunplus 04fc:500c Sunplus CA500C
sunplus 04fc:504a Aiptek Mini PenCam 1.3
sunplus 04fc:504b Maxell MaxPocket LE 1.3
@@ -142,6 +151,7 @@ sunplus 04fc:5360 Sunplus Generic
spca500 04fc:7333 PalmPixDC85
sunplus 04fc:ffff Pure DigitalDakota
spca501 0506:00df 3Com HomeConnect Lite
+sunplus 052b:1507 Megapixel 5 Pretec DC-1007
sunplus 052b:1513 Megapix V4
sunplus 052b:1803 MegaImage VI
tv8532 0545:808b Veo Stingray
@@ -151,6 +161,7 @@ sunplus 0546:3191 Polaroid Ion 80
sunplus 0546:3273 Polaroid PDC2030
ov519 054c:0154 Sonny toy4
ov519 054c:0155 Sonny toy5
+cpia1 0553:0002 CPIA CPiA (version1) based cameras
zc3xx 055f:c005 Mustek Wcam300A
spca500 055f:c200 Mustek Gsmart 300
sunplus 055f:c211 Kowa Bs888e Microcamera
@@ -188,8 +199,7 @@ spca500 06bd:0404 Agfa CL20
spca500 06be:0800 Optimedia
sunplus 06d6:0031 Trust 610 LCD PowerC@m Zoom
spca506 06e1:a190 ADS Instant VCD
-ov534 06f8:3002 Hercules Blog Webcam
-ov534 06f8:3003 Hercules Dualpix HD Weblog
+ov534_9 06f8:3003 Hercules Dualpix HD Weblog
sonixj 06f8:3004 Hercules Classic Silver
sonixj 06f8:3008 Hercules Deluxe Optical Glass
pac7302 06f8:3009 Hercules Classic Link
@@ -204,6 +214,7 @@ sunplus 0733:2221 Mercury Digital Pro 3.1p
sunplus 0733:3261 Concord 3045 spca536a
sunplus 0733:3281 Cyberpix S550V
spca506 0734:043b 3DeMon USB Capture aka
+cpia1 0813:0001 QX3 camera
ov519 0813:0002 Dual Mode USB Camera Plus
spca500 084d:0003 D-Link DSC-350
spca500 08ca:0103 Aiptek PocketDV
@@ -225,7 +236,8 @@ sunplus 08ca:2050 Medion MD 41437
sunplus 08ca:2060 Aiptek PocketDV5300
tv8532 0923:010f ICM532 cams
mars 093a:050f Mars-Semi Pc-Camera
-mr97310a 093a:010f Sakar Digital no. 77379
+mr97310a 093a:010e All known CIF cams with this ID
+mr97310a 093a:010f All known VGA cams with this ID
pac207 093a:2460 Qtec Webcam 100
pac207 093a:2461 HP Webcam
pac207 093a:2463 Philips SPC 220 NC
@@ -246,6 +258,7 @@ pac7302 093a:2620 Apollo AC-905
pac7302 093a:2621 PAC731x
pac7302 093a:2622 Genius Eye 312
pac7302 093a:2624 PAC7302
+pac7302 093a:2625 Genius iSlim 310
pac7302 093a:2626 Labtec 2200
pac7302 093a:2628 Genius iLook 300
pac7302 093a:2629 Genious iSlim 300
@@ -283,6 +296,7 @@ sonixb 0c45:602e Genius VideoCam Messenger
sonixj 0c45:6040 Speed NVC 350K
sonixj 0c45:607c Sonix sn9c102p Hv7131R
sonixj 0c45:60c0 Sangha Sn535
+sonixj 0c45:60ce USB-PC-Camera-168 (TALK-5067)
sonixj 0c45:60ec SN9C105+MO4000
sonixj 0c45:60fb Surfer NoName
sonixj 0c45:60fc LG-LIC300
@@ -300,11 +314,14 @@ sonixj 0c45:6138 Sn9c120 Mo4000
sonixj 0c45:613a Microdia Sonix PC Camera
sonixj 0c45:613b Surfer SN-206
sonixj 0c45:613c Sonix Pccam168
+sonixj 0c45:6142 Hama PC-Webcam AC-150
sonixj 0c45:6143 Sonix Pccam168
sonixj 0c45:6148 Digitus DA-70811/ZSMC USB PC Camera ZS211/Microdia
+sonixj 0c45:614a Frontech E-Ccam (JIL-2225)
sn9c20x 0c45:6240 PC Camera (SN9C201 + MT9M001)
sn9c20x 0c45:6242 PC Camera (SN9C201 + MT9M111)
sn9c20x 0c45:6248 PC Camera (SN9C201 + OV9655)
+sn9c20x 0c45:624c PC Camera (SN9C201 + MT9M112)
sn9c20x 0c45:624e PC Camera (SN9C201 + SOI968)
sn9c20x 0c45:624f PC Camera (SN9C201 + OV9650)
sn9c20x 0c45:6251 PC Camera (SN9C201 + OV9650)
@@ -317,6 +334,7 @@ sn9c20x 0c45:627f PC Camera (SN9C201 + OV9650)
sn9c20x 0c45:6280 PC Camera (SN9C202 + MT9M001)
sn9c20x 0c45:6282 PC Camera (SN9C202 + MT9M111)
sn9c20x 0c45:6288 PC Camera (SN9C202 + OV9655)
+sn9c20x 0c45:628c PC Camera (SN9C201 + MT9M112)
sn9c20x 0c45:628e PC Camera (SN9C202 + SOI968)
sn9c20x 0c45:628f PC Camera (SN9C202 + OV9650)
sn9c20x 0c45:62a0 PC Camera (SN9C202 + OV7670)
@@ -324,6 +342,10 @@ sn9c20x 0c45:62b0 PC Camera (SN9C202 + MT9V011/MT9V111/MT9V112)
sn9c20x 0c45:62b3 PC Camera (SN9C202 + OV9655)
sn9c20x 0c45:62bb PC Camera (SN9C202 + OV7660)
sn9c20x 0c45:62bc PC Camera (SN9C202 + HV7131R)
+sn9c2028 0c45:8001 Wild Planet Digital Spy Camera
+sn9c2028 0c45:8003 Sakar #11199, #6637x, #67480 keychain cams
+sn9c2028 0c45:8008 Mini-Shotz ms-350
+sn9c2028 0c45:800a Vivitar Vivicam 3350B
sunplus 0d64:0303 Sunplus FashionCam DXG
ov519 0e96:c001 TRUST 380 USB2 SPACEC@M
etoms 102c:6151 Qcam Sangha CIF
@@ -341,10 +363,13 @@ spca501 1776:501c Arowana 300K CMOS Camera
t613 17a1:0128 TASCORP JPEG Webcam, NGS Cyclops
vc032x 17ef:4802 Lenovo Vc0323+MI1310_SOC
pac207 2001:f115 D-Link DSB-C120
-sq905c 2770:9050 sq905c
-sq905c 2770:905c DualCamera
-sq905 2770:9120 Argus Digital Camera DC1512
-sq905c 2770:913d sq905c
+sq905c 2770:9050 Disney pix micro (CIF)
+sq905c 2770:9052 Disney pix micro 2 (VGA)
+sq905c 2770:905c All 11 known cameras with this ID
+sq905 2770:9120 All 24 known cameras with this ID
+sq905c 2770:913d All 4 known cameras with this ID
+sq930x 2770:930b Sweex Motion Tracking / I-Tec iCam Tracer
+sq930x 2770:930c Trust WB-3500T / NSG Robbie 2.0
spca500 2899:012c Toptro Industrial
ov519 8020:ef04 ov519
spca508 8086:0110 Intel Easy PC Camera
diff --git a/Documentation/video4linux/hauppauge-wintv-cx88-ir.txt b/Documentation/video4linux/hauppauge-wintv-cx88-ir.txt
index faccee68f60..a2fd363c40c 100644
--- a/Documentation/video4linux/hauppauge-wintv-cx88-ir.txt
+++ b/Documentation/video4linux/hauppauge-wintv-cx88-ir.txt
@@ -44,7 +44,7 @@ http://www.atmel.com/dyn/resources/prod_documents/doc2817.pdf
This data sheet (google search) seems to have a lovely description of the
RC5 basics
-http://users.pandora.be/nenya/electronics/rc5/ and more data
+http://www.nenya.be/beor/electronics/rc5.htm and more data
http://www.ee.washington.edu/circuit_archive/text/ir_decode.txt
and even a reference to how to decode a bi-phase data stream.
diff --git a/Documentation/video4linux/ibmcam.txt b/Documentation/video4linux/ibmcam.txt
index 397a94eb77b..a51055211e6 100644
--- a/Documentation/video4linux/ibmcam.txt
+++ b/Documentation/video4linux/ibmcam.txt
@@ -27,9 +27,8 @@ SUPPORTED CAMERAS:
Xirlink "C-It" camera, also known as "IBM PC Camera".
The device uses proprietary ASIC (and compression method);
-it is manufactured by Xirlink. See http://www.xirlink.com/
-(renamed to http://www.veo.com), http://www.ibmpccamera.com,
-or http://www.c-itnow.com/ for details and pictures.
+it is manufactured by Xirlink. See http://xirlinkwebcam.sourceforge.net,
+http://www.ibmpccamera.com, or http://www.c-itnow.com/ for details and pictures.
This very chipset ("X Chip", as marked at the factory)
is used in several other cameras, and they are supported
diff --git a/Documentation/video4linux/se401.txt b/Documentation/video4linux/se401.txt
index 7b9d1c960a1..bd6526ec8dd 100644
--- a/Documentation/video4linux/se401.txt
+++ b/Documentation/video4linux/se401.txt
@@ -49,6 +49,6 @@ order to increase the throughput (and thus framerate).
HELP:
The latest info on this driver can be found at:
-http://www.chello.nl/~j.vreeken/se401/
+http://members.chello.nl/~j.vreeken/se401/
And questions to me can be send to:
pe1rxq@amsat.org
diff --git a/Documentation/video4linux/sh_mobile_ceu_camera.txt b/Documentation/video4linux/sh_mobile_ceu_camera.txt
index 2ae16349a78..cb47e723af7 100644
--- a/Documentation/video4linux/sh_mobile_ceu_camera.txt
+++ b/Documentation/video4linux/sh_mobile_ceu_camera.txt
@@ -17,18 +17,18 @@ Generic scaling / cropping scheme
-2-- -\
| --\
| --\
-+-5-- -\ -- -3--
-| ---\
-| --- -4-- -\
-| -\
-| - -6--
++-5-- . -- -3-- -\
+| `... -\
+| `... -4-- . - -7..
+| `.
+| `. .6--
|
-| - -6'-
-| -/
-| --- -4'- -/
-| ---/
-+-5'- -/
-| -- -3'-
+| . .6'-
+| .´
+| ... -4'- .´
+| ...´ - -7'.
++-5'- .´ -/
+| -- -3'- -/
| --/
| --/
-2'- -/
@@ -36,7 +36,11 @@ Generic scaling / cropping scheme
|
-1'-
-Produced by user requests:
+In the above chart minuses and slashes represent "real" data amounts, points and
+accents represent "useful" data, basically, CEU scaled amd cropped output,
+mapped back onto the client's source plane.
+
+Such a configuration can be produced by user requests:
S_CROP(left / top = (5) - (1), width / height = (5') - (5))
S_FMT(width / height = (6') - (6))
@@ -106,52 +110,30 @@ window:
S_CROP
------
-If old scale applied to new crop is invalid produce nearest new scale possible
-
-1. Calculate current combined scales.
-
- scale_comb = (((4') - (4)) / ((6') - (6))) * (((2') - (2)) / ((3') - (3)))
-
-2. Apply iterative sensor S_CROP for new input window.
-
-3. If old combined scales applied to new crop produce an impossible user window,
-adjust scales to produce nearest possible window.
-
- width_u_out = ((5') - (5)) / scale_comb
+The API at http://v4l2spec.bytesex.org/spec/x1904.htm says:
- if (width_u_out > max)
- scale_comb = ((5') - (5)) / max;
- else if (width_u_out < min)
- scale_comb = ((5') - (5)) / min;
+"...specification does not define an origin or units. However by convention
+drivers should horizontally count unscaled samples relative to 0H."
-4. Issue G_CROP to retrieve actual input window.
+We choose to follow the advise and interpret cropping units as client input
+pixels.
-5. Using actual input window and calculated combined scales calculate sensor
-target output window.
-
- width_s_out = ((3') - (3)) = ((2') - (2)) / scale_comb
-
-6. Apply iterative S_FMT for new sensor target output window.
-
-7. Issue G_FMT to retrieve the actual sensor output window.
-
-8. Calculate sensor scales.
-
- scale_s = ((3') - (3)) / ((2') - (2))
+Cropping is performed in the following 6 steps:
-9. Calculate sensor output subwindow to be cropped on CEU by applying sensor
-scales to the requested window.
+1. Request exactly user rectangle from the sensor.
- width_ceu = ((5') - (5)) / scale_s
+2. If smaller - iterate until a larger one is obtained. Result: sensor cropped
+ to 2 : 2', target crop 5 : 5', current output format 6' - 6.
-10. Use CEU cropping for above calculated window.
+3. In the previous step the sensor has tried to preserve its output frame as
+ good as possible, but it could have changed. Retrieve it again.
-11. Calculate CEU scales from sensor scales from results of (10) and user window
-from (3)
+4. Sensor scaled to 3 : 3'. Sensor's scale is (2' - 2) / (3' - 3). Calculate
+ intermediate window: 4' - 4 = (5' - 5) * (3' - 3) / (2' - 2)
- scale_ceu = calc_scale(((5') - (5)), &width_u_out)
+5. Calculate and apply host scale = (6' - 6) / (4' - 4)
-12. Apply CEU scales.
+6. Calculate and apply host crop: 6 - 7 = (5 - 2) * (6' - 6) / (5' - 5)
--
Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
diff --git a/Documentation/video4linux/v4l2-controls.txt b/Documentation/video4linux/v4l2-controls.txt
new file mode 100644
index 00000000000..8773778d23f
--- /dev/null
+++ b/Documentation/video4linux/v4l2-controls.txt
@@ -0,0 +1,648 @@
+Introduction
+============
+
+The V4L2 control API seems simple enough, but quickly becomes very hard to
+implement correctly in drivers. But much of the code needed to handle controls
+is actually not driver specific and can be moved to the V4L core framework.
+
+After all, the only part that a driver developer is interested in is:
+
+1) How do I add a control?
+2) How do I set the control's value? (i.e. s_ctrl)
+
+And occasionally:
+
+3) How do I get the control's value? (i.e. g_volatile_ctrl)
+4) How do I validate the user's proposed control value? (i.e. try_ctrl)
+
+All the rest is something that can be done centrally.
+
+The control framework was created in order to implement all the rules of the
+V4L2 specification with respect to controls in a central place. And to make
+life as easy as possible for the driver developer.
+
+Note that the control framework relies on the presence of a struct v4l2_device
+for V4L2 drivers and struct v4l2_subdev for sub-device drivers.
+
+
+Objects in the framework
+========================
+
+There are two main objects:
+
+The v4l2_ctrl object describes the control properties and keeps track of the
+control's value (both the current value and the proposed new value).
+
+v4l2_ctrl_handler is the object that keeps track of controls. It maintains a
+list of v4l2_ctrl objects that it owns and another list of references to
+controls, possibly to controls owned by other handlers.
+
+
+Basic usage for V4L2 and sub-device drivers
+===========================================
+
+1) Prepare the driver:
+
+1.1) Add the handler to your driver's top-level struct:
+
+ struct foo_dev {
+ ...
+ struct v4l2_ctrl_handler ctrl_handler;
+ ...
+ };
+
+ struct foo_dev *foo;
+
+1.2) Initialize the handler:
+
+ v4l2_ctrl_handler_init(&foo->ctrl_handler, nr_of_controls);
+
+ The second argument is a hint telling the function how many controls this
+ handler is expected to handle. It will allocate a hashtable based on this
+ information. It is a hint only.
+
+1.3) Hook the control handler into the driver:
+
+1.3.1) For V4L2 drivers do this:
+
+ struct foo_dev {
+ ...
+ struct v4l2_device v4l2_dev;
+ ...
+ struct v4l2_ctrl_handler ctrl_handler;
+ ...
+ };
+
+ foo->v4l2_dev.ctrl_handler = &foo->ctrl_handler;
+
+ Where foo->v4l2_dev is of type struct v4l2_device.
+
+ Finally, remove all control functions from your v4l2_ioctl_ops:
+ vidioc_queryctrl, vidioc_querymenu, vidioc_g_ctrl, vidioc_s_ctrl,
+ vidioc_g_ext_ctrls, vidioc_try_ext_ctrls and vidioc_s_ext_ctrls.
+ Those are now no longer needed.
+
+1.3.2) For sub-device drivers do this:
+
+ struct foo_dev {
+ ...
+ struct v4l2_subdev sd;
+ ...
+ struct v4l2_ctrl_handler ctrl_handler;
+ ...
+ };
+
+ foo->sd.ctrl_handler = &foo->ctrl_handler;
+
+ Where foo->sd is of type struct v4l2_subdev.
+
+ And set all core control ops in your struct v4l2_subdev_core_ops to these
+ helpers:
+
+ .queryctrl = v4l2_subdev_queryctrl,
+ .querymenu = v4l2_subdev_querymenu,
+ .g_ctrl = v4l2_subdev_g_ctrl,
+ .s_ctrl = v4l2_subdev_s_ctrl,
+ .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+ .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+ .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+
+ Note: this is a temporary solution only. Once all V4L2 drivers that depend
+ on subdev drivers are converted to the control framework these helpers will
+ no longer be needed.
+
+1.4) Clean up the handler at the end:
+
+ v4l2_ctrl_handler_free(&foo->ctrl_handler);
+
+
+2) Add controls:
+
+You add non-menu controls by calling v4l2_ctrl_new_std:
+
+ struct v4l2_ctrl *v4l2_ctrl_new_std(struct v4l2_ctrl_handler *hdl,
+ const struct v4l2_ctrl_ops *ops,
+ u32 id, s32 min, s32 max, u32 step, s32 def);
+
+Menu controls are added by calling v4l2_ctrl_new_std_menu:
+
+ struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl,
+ const struct v4l2_ctrl_ops *ops,
+ u32 id, s32 max, s32 skip_mask, s32 def);
+
+These functions are typically called right after the v4l2_ctrl_handler_init:
+
+ v4l2_ctrl_handler_init(&foo->ctrl_handler, nr_of_controls);
+ v4l2_ctrl_new_std(&foo->ctrl_handler, &foo_ctrl_ops,
+ V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
+ v4l2_ctrl_new_std(&foo->ctrl_handler, &foo_ctrl_ops,
+ V4L2_CID_CONTRAST, 0, 255, 1, 128);
+ v4l2_ctrl_new_std_menu(&foo->ctrl_handler, &foo_ctrl_ops,
+ V4L2_CID_POWER_LINE_FREQUENCY,
+ V4L2_CID_POWER_LINE_FREQUENCY_60HZ, 0,
+ V4L2_CID_POWER_LINE_FREQUENCY_DISABLED);
+ ...
+ if (foo->ctrl_handler.error) {
+ int err = foo->ctrl_handler.error;
+
+ v4l2_ctrl_handler_free(&foo->ctrl_handler);
+ return err;
+ }
+
+The v4l2_ctrl_new_std function returns the v4l2_ctrl pointer to the new
+control, but if you do not need to access the pointer outside the control ops,
+then there is no need to store it.
+
+The v4l2_ctrl_new_std function will fill in most fields based on the control
+ID except for the min, max, step and default values. These are passed in the
+last four arguments. These values are driver specific while control attributes
+like type, name, flags are all global. The control's current value will be set
+to the default value.
+
+The v4l2_ctrl_new_std_menu function is very similar but it is used for menu
+controls. There is no min argument since that is always 0 for menu controls,
+and instead of a step there is a skip_mask argument: if bit X is 1, then menu
+item X is skipped.
+
+Note that if something fails, the function will return NULL or an error and
+set ctrl_handler->error to the error code. If ctrl_handler->error was already
+set, then it will just return and do nothing. This is also true for
+v4l2_ctrl_handler_init if it cannot allocate the internal data structure.
+
+This makes it easy to init the handler and just add all controls and only check
+the error code at the end. Saves a lot of repetitive error checking.
+
+It is recommended to add controls in ascending control ID order: it will be
+a bit faster that way.
+
+3) Optionally force initial control setup:
+
+ v4l2_ctrl_handler_setup(&foo->ctrl_handler);
+
+This will call s_ctrl for all controls unconditionally. Effectively this
+initializes the hardware to the default control values. It is recommended
+that you do this as this ensures that both the internal data structures and
+the hardware are in sync.
+
+4) Finally: implement the v4l2_ctrl_ops
+
+ static const struct v4l2_ctrl_ops foo_ctrl_ops = {
+ .s_ctrl = foo_s_ctrl,
+ };
+
+Usually all you need is s_ctrl:
+
+ static int foo_s_ctrl(struct v4l2_ctrl *ctrl)
+ {
+ struct foo *state = container_of(ctrl->handler, struct foo, ctrl_handler);
+
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ write_reg(0x123, ctrl->val);
+ break;
+ case V4L2_CID_CONTRAST:
+ write_reg(0x456, ctrl->val);
+ break;
+ }
+ return 0;
+ }
+
+The control ops are called with the v4l2_ctrl pointer as argument.
+The new control value has already been validated, so all you need to do is
+to actually update the hardware registers.
+
+You're done! And this is sufficient for most of the drivers we have. No need
+to do any validation of control values, or implement QUERYCTRL/QUERYMENU. And
+G/S_CTRL as well as G/TRY/S_EXT_CTRLS are automatically supported.
+
+
+==============================================================================
+
+The remainder of this document deals with more advanced topics and scenarios.
+In practice the basic usage as described above is sufficient for most drivers.
+
+===============================================================================
+
+
+Inheriting Controls
+===================
+
+When a sub-device is registered with a V4L2 driver by calling
+v4l2_device_register_subdev() and the ctrl_handler fields of both v4l2_subdev
+and v4l2_device are set, then the controls of the subdev will become
+automatically available in the V4L2 driver as well. If the subdev driver
+contains controls that already exist in the V4L2 driver, then those will be
+skipped (so a V4L2 driver can always override a subdev control).
+
+What happens here is that v4l2_device_register_subdev() calls
+v4l2_ctrl_add_handler() adding the controls of the subdev to the controls
+of v4l2_device.
+
+
+Accessing Control Values
+========================
+
+The v4l2_ctrl struct contains these two unions:
+
+ /* The current control value. */
+ union {
+ s32 val;
+ s64 val64;
+ char *string;
+ } cur;
+
+ /* The new control value. */
+ union {
+ s32 val;
+ s64 val64;
+ char *string;
+ };
+
+Within the control ops you can freely use these. The val and val64 speak for
+themselves. The string pointers point to character buffers of length
+ctrl->maximum + 1, and are always 0-terminated.
+
+In most cases 'cur' contains the current cached control value. When you create
+a new control this value is made identical to the default value. After calling
+v4l2_ctrl_handler_setup() this value is passed to the hardware. It is generally
+a good idea to call this function.
+
+Whenever a new value is set that new value is automatically cached. This means
+that most drivers do not need to implement the g_volatile_ctrl() op. The
+exception is for controls that return a volatile register such as a signal
+strength read-out that changes continuously. In that case you will need to
+implement g_volatile_ctrl like this:
+
+ static int foo_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
+ {
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ ctrl->cur.val = read_reg(0x123);
+ break;
+ }
+ }
+
+The 'new value' union is not used in g_volatile_ctrl. In general controls
+that need to implement g_volatile_ctrl are read-only controls.
+
+To mark a control as volatile you have to set the is_volatile flag:
+
+ ctrl = v4l2_ctrl_new_std(&sd->ctrl_handler, ...);
+ if (ctrl)
+ ctrl->is_volatile = 1;
+
+For try/s_ctrl the new values (i.e. as passed by the user) are filled in and
+you can modify them in try_ctrl or set them in s_ctrl. The 'cur' union
+contains the current value, which you can use (but not change!) as well.
+
+If s_ctrl returns 0 (OK), then the control framework will copy the new final
+values to the 'cur' union.
+
+While in g_volatile/s/try_ctrl you can access the value of all controls owned
+by the same handler since the handler's lock is held. If you need to access
+the value of controls owned by other handlers, then you have to be very careful
+not to introduce deadlocks.
+
+Outside of the control ops you have to go through to helper functions to get
+or set a single control value safely in your driver:
+
+ s32 v4l2_ctrl_g_ctrl(struct v4l2_ctrl *ctrl);
+ int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val);
+
+These functions go through the control framework just as VIDIOC_G/S_CTRL ioctls
+do. Don't use these inside the control ops g_volatile/s/try_ctrl, though, that
+will result in a deadlock since these helpers lock the handler as well.
+
+You can also take the handler lock yourself:
+
+ mutex_lock(&state->ctrl_handler.lock);
+ printk(KERN_INFO "String value is '%s'\n", ctrl1->cur.string);
+ printk(KERN_INFO "Integer value is '%s'\n", ctrl2->cur.val);
+ mutex_unlock(&state->ctrl_handler.lock);
+
+
+Menu Controls
+=============
+
+The v4l2_ctrl struct contains this union:
+
+ union {
+ u32 step;
+ u32 menu_skip_mask;
+ };
+
+For menu controls menu_skip_mask is used. What it does is that it allows you
+to easily exclude certain menu items. This is used in the VIDIOC_QUERYMENU
+implementation where you can return -EINVAL if a certain menu item is not
+present. Note that VIDIOC_QUERYCTRL always returns a step value of 1 for
+menu controls.
+
+A good example is the MPEG Audio Layer II Bitrate menu control where the
+menu is a list of standardized possible bitrates. But in practice hardware
+implementations will only support a subset of those. By setting the skip
+mask you can tell the framework which menu items should be skipped. Setting
+it to 0 means that all menu items are supported.
+
+You set this mask either through the v4l2_ctrl_config struct for a custom
+control, or by calling v4l2_ctrl_new_std_menu().
+
+
+Custom Controls
+===============
+
+Driver specific controls can be created using v4l2_ctrl_new_custom():
+
+ static const struct v4l2_ctrl_config ctrl_filter = {
+ .ops = &ctrl_custom_ops,
+ .id = V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER,
+ .name = "Spatial Filter",
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .flags = V4L2_CTRL_FLAG_SLIDER,
+ .max = 15,
+ .step = 1,
+ };
+
+ ctrl = v4l2_ctrl_new_custom(&foo->ctrl_handler, &ctrl_filter, NULL);
+
+The last argument is the priv pointer which can be set to driver-specific
+private data.
+
+The v4l2_ctrl_config struct also has fields to set the is_private and is_volatile
+flags.
+
+If the name field is not set, then the framework will assume this is a standard
+control and will fill in the name, type and flags fields accordingly.
+
+
+Active and Grabbed Controls
+===========================
+
+If you get more complex relationships between controls, then you may have to
+activate and deactivate controls. For example, if the Chroma AGC control is
+on, then the Chroma Gain control is inactive. That is, you may set it, but
+the value will not be used by the hardware as long as the automatic gain
+control is on. Typically user interfaces can disable such input fields.
+
+You can set the 'active' status using v4l2_ctrl_activate(). By default all
+controls are active. Note that the framework does not check for this flag.
+It is meant purely for GUIs. The function is typically called from within
+s_ctrl.
+
+The other flag is the 'grabbed' flag. A grabbed control means that you cannot
+change it because it is in use by some resource. Typical examples are MPEG
+bitrate controls that cannot be changed while capturing is in progress.
+
+If a control is set to 'grabbed' using v4l2_ctrl_grab(), then the framework
+will return -EBUSY if an attempt is made to set this control. The
+v4l2_ctrl_grab() function is typically called from the driver when it
+starts or stops streaming.
+
+
+Control Clusters
+================
+
+By default all controls are independent from the others. But in more
+complex scenarios you can get dependencies from one control to another.
+In that case you need to 'cluster' them:
+
+ struct foo {
+ struct v4l2_ctrl_handler ctrl_handler;
+#define AUDIO_CL_VOLUME (0)
+#define AUDIO_CL_MUTE (1)
+ struct v4l2_ctrl *audio_cluster[2];
+ ...
+ };
+
+ state->audio_cluster[AUDIO_CL_VOLUME] =
+ v4l2_ctrl_new_std(&state->ctrl_handler, ...);
+ state->audio_cluster[AUDIO_CL_MUTE] =
+ v4l2_ctrl_new_std(&state->ctrl_handler, ...);
+ v4l2_ctrl_cluster(ARRAY_SIZE(state->audio_cluster), state->audio_cluster);
+
+From now on whenever one or more of the controls belonging to the same
+cluster is set (or 'gotten', or 'tried'), only the control ops of the first
+control ('volume' in this example) is called. You effectively create a new
+composite control. Similar to how a 'struct' works in C.
+
+So when s_ctrl is called with V4L2_CID_AUDIO_VOLUME as argument, you should set
+all two controls belonging to the audio_cluster:
+
+ static int foo_s_ctrl(struct v4l2_ctrl *ctrl)
+ {
+ struct foo *state = container_of(ctrl->handler, struct foo, ctrl_handler);
+
+ switch (ctrl->id) {
+ case V4L2_CID_AUDIO_VOLUME: {
+ struct v4l2_ctrl *mute = ctrl->cluster[AUDIO_CL_MUTE];
+
+ write_reg(0x123, mute->val ? 0 : ctrl->val);
+ break;
+ }
+ case V4L2_CID_CONTRAST:
+ write_reg(0x456, ctrl->val);
+ break;
+ }
+ return 0;
+ }
+
+In the example above the following are equivalent for the VOLUME case:
+
+ ctrl == ctrl->cluster[AUDIO_CL_VOLUME] == state->audio_cluster[AUDIO_CL_VOLUME]
+ ctrl->cluster[AUDIO_CL_MUTE] == state->audio_cluster[AUDIO_CL_MUTE]
+
+Note that controls in a cluster may be NULL. For example, if for some
+reason mute was never added (because the hardware doesn't support that
+particular feature), then mute will be NULL. So in that case we have a
+cluster of 2 controls, of which only 1 is actually instantiated. The
+only restriction is that the first control of the cluster must always be
+present, since that is the 'master' control of the cluster. The master
+control is the one that identifies the cluster and that provides the
+pointer to the v4l2_ctrl_ops struct that is used for that cluster.
+
+Obviously, all controls in the cluster array must be initialized to either
+a valid control or to NULL.
+
+
+VIDIOC_LOG_STATUS Support
+=========================
+
+This ioctl allow you to dump the current status of a driver to the kernel log.
+The v4l2_ctrl_handler_log_status(ctrl_handler, prefix) can be used to dump the
+value of the controls owned by the given handler to the log. You can supply a
+prefix as well. If the prefix didn't end with a space, then ': ' will be added
+for you.
+
+
+Different Handlers for Different Video Nodes
+============================================
+
+Usually the V4L2 driver has just one control handler that is global for
+all video nodes. But you can also specify different control handlers for
+different video nodes. You can do that by manually setting the ctrl_handler
+field of struct video_device.
+
+That is no problem if there are no subdevs involved but if there are, then
+you need to block the automatic merging of subdev controls to the global
+control handler. You do that by simply setting the ctrl_handler field in
+struct v4l2_device to NULL. Now v4l2_device_register_subdev() will no longer
+merge subdev controls.
+
+After each subdev was added, you will then have to call v4l2_ctrl_add_handler
+manually to add the subdev's control handler (sd->ctrl_handler) to the desired
+control handler. This control handler may be specific to the video_device or
+for a subset of video_device's. For example: the radio device nodes only have
+audio controls, while the video and vbi device nodes share the same control
+handler for the audio and video controls.
+
+If you want to have one handler (e.g. for a radio device node) have a subset
+of another handler (e.g. for a video device node), then you should first add
+the controls to the first handler, add the other controls to the second
+handler and finally add the first handler to the second. For example:
+
+ v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_VOLUME, ...);
+ v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_MUTE, ...);
+ v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_BRIGHTNESS, ...);
+ v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_CONTRAST, ...);
+ v4l2_ctrl_add_handler(&video_ctrl_handler, &radio_ctrl_handler);
+
+Or you can add specific controls to a handler:
+
+ volume = v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_AUDIO_VOLUME, ...);
+ v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_BRIGHTNESS, ...);
+ v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_CONTRAST, ...);
+ v4l2_ctrl_add_ctrl(&radio_ctrl_handler, volume);
+
+What you should not do is make two identical controls for two handlers.
+For example:
+
+ v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_MUTE, ...);
+ v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_AUDIO_MUTE, ...);
+
+This would be bad since muting the radio would not change the video mute
+control. The rule is to have one control for each hardware 'knob' that you
+can twiddle.
+
+
+Finding Controls
+================
+
+Normally you have created the controls yourself and you can store the struct
+v4l2_ctrl pointer into your own struct.
+
+But sometimes you need to find a control from another handler that you do
+not own. For example, if you have to find a volume control from a subdev.
+
+You can do that by calling v4l2_ctrl_find:
+
+ struct v4l2_ctrl *volume;
+
+ volume = v4l2_ctrl_find(sd->ctrl_handler, V4L2_CID_AUDIO_VOLUME);
+
+Since v4l2_ctrl_find will lock the handler you have to be careful where you
+use it. For example, this is not a good idea:
+
+ struct v4l2_ctrl_handler ctrl_handler;
+
+ v4l2_ctrl_new_std(&ctrl_handler, &video_ops, V4L2_CID_BRIGHTNESS, ...);
+ v4l2_ctrl_new_std(&ctrl_handler, &video_ops, V4L2_CID_CONTRAST, ...);
+
+...and in video_ops.s_ctrl:
+
+ case V4L2_CID_BRIGHTNESS:
+ contrast = v4l2_find_ctrl(&ctrl_handler, V4L2_CID_CONTRAST);
+ ...
+
+When s_ctrl is called by the framework the ctrl_handler.lock is already taken, so
+attempting to find another control from the same handler will deadlock.
+
+It is recommended not to use this function from inside the control ops.
+
+
+Inheriting Controls
+===================
+
+When one control handler is added to another using v4l2_ctrl_add_handler, then
+by default all controls from one are merged to the other. But a subdev might
+have low-level controls that make sense for some advanced embedded system, but
+not when it is used in consumer-level hardware. In that case you want to keep
+those low-level controls local to the subdev. You can do this by simply
+setting the 'is_private' flag of the control to 1:
+
+ static const struct v4l2_ctrl_config ctrl_private = {
+ .ops = &ctrl_custom_ops,
+ .id = V4L2_CID_...,
+ .name = "Some Private Control",
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .max = 15,
+ .step = 1,
+ .is_private = 1,
+ };
+
+ ctrl = v4l2_ctrl_new_custom(&foo->ctrl_handler, &ctrl_private, NULL);
+
+These controls will now be skipped when v4l2_ctrl_add_handler is called.
+
+
+V4L2_CTRL_TYPE_CTRL_CLASS Controls
+==================================
+
+Controls of this type can be used by GUIs to get the name of the control class.
+A fully featured GUI can make a dialog with multiple tabs with each tab
+containing the controls belonging to a particular control class. The name of
+each tab can be found by querying a special control with ID <control class | 1>.
+
+Drivers do not have to care about this. The framework will automatically add
+a control of this type whenever the first control belonging to a new control
+class is added.
+
+
+Differences from the Spec
+=========================
+
+There are a few places where the framework acts slightly differently from the
+V4L2 Specification. Those differences are described in this section. We will
+have to see whether we need to adjust the spec or not.
+
+1) It is no longer required to have all controls contained in a
+v4l2_ext_control array be from the same control class. The framework will be
+able to handle any type of control in the array. You need to set ctrl_class
+to 0 in order to enable this. If ctrl_class is non-zero, then it will still
+check that all controls belong to that control class.
+
+If you set ctrl_class to 0 and count to 0, then it will only return an error
+if there are no controls at all.
+
+2) Clarified the way error_idx works. For get and set it will be equal to
+count if nothing was done yet. If it is less than count then only the controls
+up to error_idx-1 were successfully applied.
+
+3) When attempting to read a button control the framework will return -EACCES
+instead of -EINVAL as stated in the spec. It seems to make more sense since
+button controls are write-only controls.
+
+4) Attempting to write to a read-only control will return -EACCES instead of
+-EINVAL as the spec says.
+
+5) The spec does not mention what should happen when you try to set/get a
+control class controls. ivtv currently returns -EINVAL (indicating that the
+control ID does not exist) while the framework will return -EACCES, which
+makes more sense.
+
+
+Proposals for Extensions
+========================
+
+Some ideas for future extensions to the spec:
+
+1) Add a V4L2_CTRL_FLAG_HEX to have values shown as hexadecimal instead of
+decimal. Useful for e.g. video_mute_yuv.
+
+2) It is possible to mark in the controls array which controls have been
+successfully written and which failed by for example adding a bit to the
+control ID. Not sure if it is worth the effort, though.
+
+3) Trying to set volatile inactive controls should result in -EACCESS.
+
+4) Add a new flag to mark volatile controls. Any application that wants
+to store the state of the controls can then skip volatile inactive controls.
+Currently it is not possible to detect such controls.
diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt
index 74d677c8b03..e831aaca66f 100644
--- a/Documentation/video4linux/v4l2-framework.txt
+++ b/Documentation/video4linux/v4l2-framework.txt
@@ -545,12 +545,11 @@ unregister them:
This will remove the device nodes from sysfs (causing udev to remove them
from /dev).
-After video_unregister_device() returns no new opens can be done.
-
-However, in the case of USB devices some application might still have one
-of these device nodes open. You should block all new accesses to read,
-write, poll, etc. except possibly for certain ioctl operations like
-queueing buffers.
+After video_unregister_device() returns no new opens can be done. However,
+in the case of USB devices some application might still have one of these
+device nodes open. So after the unregister all file operations will return
+an error as well, except for the ioctl and unlocked_ioctl file operations:
+those will still be passed on since some buffer ioctls may still be needed.
When the last user of the video device node exits, then the vdev->release()
callback is called and you can do the final cleanup there.
@@ -599,99 +598,145 @@ video_device::minor fields.
video buffer helper functions
-----------------------------
-The v4l2 core API provides a standard method for dealing with video
-buffers. Those methods allow a driver to implement read(), mmap() and
-overlay() on a consistent way.
-
-There are currently methods for using video buffers on devices that
-supports DMA with scatter/gather method (videobuf-dma-sg), DMA with
-linear access (videobuf-dma-contig), and vmalloced buffers, mostly
-used on USB drivers (videobuf-vmalloc).
-
-Any driver using videobuf should provide operations (callbacks) for
-four handlers:
-
-ops->buf_setup - calculates the size of the video buffers and avoid they
- to waste more than some maximum limit of RAM;
-ops->buf_prepare - fills the video buffer structs and calls
- videobuf_iolock() to alloc and prepare mmaped memory;
-ops->buf_queue - advices the driver that another buffer were
- requested (by read() or by QBUF);
-ops->buf_release - frees any buffer that were allocated.
-
-In order to use it, the driver need to have a code (generally called at
-interrupt context) that will properly handle the buffer request lists,
-announcing that a new buffer were filled.
-
-The irq handling code should handle the videobuf task lists, in order
-to advice videobuf that a new frame were filled, in order to honor to a
-request. The code is generally like this one:
- if (list_empty(&dma_q->active))
- return;
-
- buf = list_entry(dma_q->active.next, struct vbuffer, vb.queue);
-
- if (!waitqueue_active(&buf->vb.done))
- return;
-
- /* Some logic to handle the buf may be needed here */
-
- list_del(&buf->vb.queue);
- do_gettimeofday(&buf->vb.ts);
- wake_up(&buf->vb.done);
-
-Those are the videobuffer functions used on drivers, implemented on
-videobuf-core:
-
-- Videobuf init functions
- videobuf_queue_sg_init()
- Initializes the videobuf infrastructure. This function should be
- called before any other videobuf function on drivers that uses DMA
- Scatter/Gather buffers.
-
- videobuf_queue_dma_contig_init
- Initializes the videobuf infrastructure. This function should be
- called before any other videobuf function on drivers that need DMA
- contiguous buffers.
-
- videobuf_queue_vmalloc_init()
- Initializes the videobuf infrastructure. This function should be
- called before any other videobuf function on USB (and other drivers)
- that need a vmalloced type of videobuf.
-
-- videobuf_iolock()
- Prepares the videobuf memory for the proper method (read, mmap, overlay).
-
-- videobuf_queue_is_busy()
- Checks if a videobuf is streaming.
-
-- videobuf_queue_cancel()
- Stops video handling.
-
-- videobuf_mmap_free()
- frees mmap buffers.
-
-- videobuf_stop()
- Stops video handling, ends mmap and frees mmap and other buffers.
-
-- V4L2 api functions. Those functions correspond to VIDIOC_foo ioctls:
- videobuf_reqbufs(), videobuf_querybuf(), videobuf_qbuf(),
- videobuf_dqbuf(), videobuf_streamon(), videobuf_streamoff().
-
-- V4L1 api function (corresponds to VIDIOCMBUF ioctl):
- videobuf_cgmbuf()
- This function is used to provide backward compatibility with V4L1
- API.
-
-- Some help functions for read()/poll() operations:
- videobuf_read_stream()
- For continuous stream read()
- videobuf_read_one()
- For snapshot read()
- videobuf_poll_stream()
- polling help function
-
-The better way to understand it is to take a look at vivi driver. One
-of the main reasons for vivi is to be a videobuf usage example. the
-vivi_thread_tick() does the task that the IRQ callback would do on PCI
-drivers (or the irq callback on USB).
+The v4l2 core API provides a set of standard methods (called "videobuf")
+for dealing with video buffers. Those methods allow a driver to implement
+read(), mmap() and overlay() in a consistent way. There are currently
+methods for using video buffers on devices that supports DMA with
+scatter/gather method (videobuf-dma-sg), DMA with linear access
+(videobuf-dma-contig), and vmalloced buffers, mostly used on USB drivers
+(videobuf-vmalloc).
+
+Please see Documentation/video4linux/videobuf for more information on how
+to use the videobuf layer.
+
+struct v4l2_fh
+--------------
+
+struct v4l2_fh provides a way to easily keep file handle specific data
+that is used by the V4L2 framework. Using v4l2_fh is optional for
+drivers.
+
+The users of v4l2_fh (in the V4L2 framework, not the driver) know
+whether a driver uses v4l2_fh as its file->private_data pointer by
+testing the V4L2_FL_USES_V4L2_FH bit in video_device->flags.
+
+Useful functions:
+
+- v4l2_fh_init()
+
+ Initialise the file handle. This *MUST* be performed in the driver's
+ v4l2_file_operations->open() handler.
+
+- v4l2_fh_add()
+
+ Add a v4l2_fh to video_device file handle list. May be called after
+ initialising the file handle.
+
+- v4l2_fh_del()
+
+ Unassociate the file handle from video_device(). The file handle
+ exit function may now be called.
+
+- v4l2_fh_exit()
+
+ Uninitialise the file handle. After uninitialisation the v4l2_fh
+ memory can be freed.
+
+struct v4l2_fh is allocated as a part of the driver's own file handle
+structure and is set to file->private_data in the driver's open
+function by the driver. Drivers can extract their own file handle
+structure by using the container_of macro. Example:
+
+struct my_fh {
+ int blah;
+ struct v4l2_fh fh;
+};
+
+...
+
+int my_open(struct file *file)
+{
+ struct my_fh *my_fh;
+ struct video_device *vfd;
+ int ret;
+
+ ...
+
+ ret = v4l2_fh_init(&my_fh->fh, vfd);
+ if (ret)
+ return ret;
+
+ v4l2_fh_add(&my_fh->fh);
+
+ file->private_data = &my_fh->fh;
+
+ ...
+}
+
+int my_release(struct file *file)
+{
+ struct v4l2_fh *fh = file->private_data;
+ struct my_fh *my_fh = container_of(fh, struct my_fh, fh);
+
+ ...
+}
+
+V4L2 events
+-----------
+
+The V4L2 events provide a generic way to pass events to user space.
+The driver must use v4l2_fh to be able to support V4L2 events.
+
+Useful functions:
+
+- v4l2_event_alloc()
+
+ To use events, the driver must allocate events for the file handle. By
+ calling the function more than once, the driver may assure that at least n
+ events in total have been allocated. The function may not be called in
+ atomic context.
+
+- v4l2_event_queue()
+
+ Queue events to video device. The driver's only responsibility is to fill
+ in the type and the data fields. The other fields will be filled in by
+ V4L2.
+
+- v4l2_event_subscribe()
+
+ The video_device->ioctl_ops->vidioc_subscribe_event must check the driver
+ is able to produce events with specified event id. Then it calls
+ v4l2_event_subscribe() to subscribe the event.
+
+- v4l2_event_unsubscribe()
+
+ vidioc_unsubscribe_event in struct v4l2_ioctl_ops. A driver may use
+ v4l2_event_unsubscribe() directly unless it wants to be involved in
+ unsubscription process.
+
+ The special type V4L2_EVENT_ALL may be used to unsubscribe all events. The
+ drivers may want to handle this in a special way.
+
+- v4l2_event_pending()
+
+ Returns the number of pending events. Useful when implementing poll.
+
+Drivers do not initialise events directly. The events are initialised
+through v4l2_fh_init() if video_device->ioctl_ops->vidioc_subscribe_event is
+non-NULL. This *MUST* be performed in the driver's
+v4l2_file_operations->open() handler.
+
+Events are delivered to user space through the poll system call. The driver
+can use v4l2_fh->events->wait wait_queue_head_t as the argument for
+poll_wait().
+
+There are standard and private events. New standard events must use the
+smallest available event type. The drivers must allocate their events from
+their own class starting from class base. Class base is
+V4L2_EVENT_PRIVATE_START + n * 1000 where n is the lowest available number.
+The first event type in the class is reserved for future use, so the first
+available event type is 'class base + 1'.
+
+An example on how the V4L2 events may be used can be found in the OMAP
+3 ISP driver available at <URL:http://gitorious.org/omap3camera> as of
+writing this.
diff --git a/Documentation/video4linux/videobuf b/Documentation/video4linux/videobuf
new file mode 100644
index 00000000000..17a1f9abf26
--- /dev/null
+++ b/Documentation/video4linux/videobuf
@@ -0,0 +1,360 @@
+An introduction to the videobuf layer
+Jonathan Corbet <corbet@lwn.net>
+Current as of 2.6.33
+
+The videobuf layer functions as a sort of glue layer between a V4L2 driver
+and user space. It handles the allocation and management of buffers for
+the storage of video frames. There is a set of functions which can be used
+to implement many of the standard POSIX I/O system calls, including read(),
+poll(), and, happily, mmap(). Another set of functions can be used to
+implement the bulk of the V4L2 ioctl() calls related to streaming I/O,
+including buffer allocation, queueing and dequeueing, and streaming
+control. Using videobuf imposes a few design decisions on the driver
+author, but the payback comes in the form of reduced code in the driver and
+a consistent implementation of the V4L2 user-space API.
+
+Buffer types
+
+Not all video devices use the same kind of buffers. In fact, there are (at
+least) three common variations:
+
+ - Buffers which are scattered in both the physical and (kernel) virtual
+ address spaces. (Almost) all user-space buffers are like this, but it
+ makes great sense to allocate kernel-space buffers this way as well when
+ it is possible. Unfortunately, it is not always possible; working with
+ this kind of buffer normally requires hardware which can do
+ scatter/gather DMA operations.
+
+ - Buffers which are physically scattered, but which are virtually
+ contiguous; buffers allocated with vmalloc(), in other words. These
+ buffers are just as hard to use for DMA operations, but they can be
+ useful in situations where DMA is not available but virtually-contiguous
+ buffers are convenient.
+
+ - Buffers which are physically contiguous. Allocation of this kind of
+ buffer can be unreliable on fragmented systems, but simpler DMA
+ controllers cannot deal with anything else.
+
+Videobuf can work with all three types of buffers, but the driver author
+must pick one at the outset and design the driver around that decision.
+
+[It's worth noting that there's a fourth kind of buffer: "overlay" buffers
+which are located within the system's video memory. The overlay
+functionality is considered to be deprecated for most use, but it still
+shows up occasionally in system-on-chip drivers where the performance
+benefits merit the use of this technique. Overlay buffers can be handled
+as a form of scattered buffer, but there are very few implementations in
+the kernel and a description of this technique is currently beyond the
+scope of this document.]
+
+Data structures, callbacks, and initialization
+
+Depending on which type of buffers are being used, the driver should
+include one of the following files:
+
+ <media/videobuf-dma-sg.h> /* Physically scattered */
+ <media/videobuf-vmalloc.h> /* vmalloc() buffers */
+ <media/videobuf-dma-contig.h> /* Physically contiguous */
+
+The driver's data structure describing a V4L2 device should include a
+struct videobuf_queue instance for the management of the buffer queue,
+along with a list_head for the queue of available buffers. There will also
+need to be an interrupt-safe spinlock which is used to protect (at least)
+the queue.
+
+The next step is to write four simple callbacks to help videobuf deal with
+the management of buffers:
+
+ struct videobuf_queue_ops {
+ int (*buf_setup)(struct videobuf_queue *q,
+ unsigned int *count, unsigned int *size);
+ int (*buf_prepare)(struct videobuf_queue *q,
+ struct videobuf_buffer *vb,
+ enum v4l2_field field);
+ void (*buf_queue)(struct videobuf_queue *q,
+ struct videobuf_buffer *vb);
+ void (*buf_release)(struct videobuf_queue *q,
+ struct videobuf_buffer *vb);
+ };
+
+buf_setup() is called early in the I/O process, when streaming is being
+initiated; its purpose is to tell videobuf about the I/O stream. The count
+parameter will be a suggested number of buffers to use; the driver should
+check it for rationality and adjust it if need be. As a practical rule, a
+minimum of two buffers are needed for proper streaming, and there is
+usually a maximum (which cannot exceed 32) which makes sense for each
+device. The size parameter should be set to the expected (maximum) size
+for each frame of data.
+
+Each buffer (in the form of a struct videobuf_buffer pointer) will be
+passed to buf_prepare(), which should set the buffer's size, width, height,
+and field fields properly. If the buffer's state field is
+VIDEOBUF_NEEDS_INIT, the driver should pass it to:
+
+ int videobuf_iolock(struct videobuf_queue* q, struct videobuf_buffer *vb,
+ struct v4l2_framebuffer *fbuf);
+
+Among other things, this call will usually allocate memory for the buffer.
+Finally, the buf_prepare() function should set the buffer's state to
+VIDEOBUF_PREPARED.
+
+When a buffer is queued for I/O, it is passed to buf_queue(), which should
+put it onto the driver's list of available buffers and set its state to
+VIDEOBUF_QUEUED. Note that this function is called with the queue spinlock
+held; if it tries to acquire it as well things will come to a screeching
+halt. Yes, this is the voice of experience. Note also that videobuf may
+wait on the first buffer in the queue; placing other buffers in front of it
+could again gum up the works. So use list_add_tail() to enqueue buffers.
+
+Finally, buf_release() is called when a buffer is no longer intended to be
+used. The driver should ensure that there is no I/O active on the buffer,
+then pass it to the appropriate free routine(s):
+
+ /* Scatter/gather drivers */
+ int videobuf_dma_unmap(struct videobuf_queue *q,
+ struct videobuf_dmabuf *dma);
+ int videobuf_dma_free(struct videobuf_dmabuf *dma);
+
+ /* vmalloc drivers */
+ void videobuf_vmalloc_free (struct videobuf_buffer *buf);
+
+ /* Contiguous drivers */
+ void videobuf_dma_contig_free(struct videobuf_queue *q,
+ struct videobuf_buffer *buf);
+
+One way to ensure that a buffer is no longer under I/O is to pass it to:
+
+ int videobuf_waiton(struct videobuf_buffer *vb, int non_blocking, int intr);
+
+Here, vb is the buffer, non_blocking indicates whether non-blocking I/O
+should be used (it should be zero in the buf_release() case), and intr
+controls whether an interruptible wait is used.
+
+File operations
+
+At this point, much of the work is done; much of the rest is slipping
+videobuf calls into the implementation of the other driver callbacks. The
+first step is in the open() function, which must initialize the
+videobuf queue. The function to use depends on the type of buffer used:
+
+ void videobuf_queue_sg_init(struct videobuf_queue *q,
+ struct videobuf_queue_ops *ops,
+ struct device *dev,
+ spinlock_t *irqlock,
+ enum v4l2_buf_type type,
+ enum v4l2_field field,
+ unsigned int msize,
+ void *priv);
+
+ void videobuf_queue_vmalloc_init(struct videobuf_queue *q,
+ struct videobuf_queue_ops *ops,
+ struct device *dev,
+ spinlock_t *irqlock,
+ enum v4l2_buf_type type,
+ enum v4l2_field field,
+ unsigned int msize,
+ void *priv);
+
+ void videobuf_queue_dma_contig_init(struct videobuf_queue *q,
+ struct videobuf_queue_ops *ops,
+ struct device *dev,
+ spinlock_t *irqlock,
+ enum v4l2_buf_type type,
+ enum v4l2_field field,
+ unsigned int msize,
+ void *priv);
+
+In each case, the parameters are the same: q is the queue structure for the
+device, ops is the set of callbacks as described above, dev is the device
+structure for this video device, irqlock is an interrupt-safe spinlock to
+protect access to the data structures, type is the buffer type used by the
+device (cameras will use V4L2_BUF_TYPE_VIDEO_CAPTURE, for example), field
+describes which field is being captured (often V4L2_FIELD_NONE for
+progressive devices), msize is the size of any containing structure used
+around struct videobuf_buffer, and priv is a private data pointer which
+shows up in the priv_data field of struct videobuf_queue. Note that these
+are void functions which, evidently, are immune to failure.
+
+V4L2 capture drivers can be written to support either of two APIs: the
+read() system call and the rather more complicated streaming mechanism. As
+a general rule, it is necessary to support both to ensure that all
+applications have a chance of working with the device. Videobuf makes it
+easy to do that with the same code. To implement read(), the driver need
+only make a call to one of:
+
+ ssize_t videobuf_read_one(struct videobuf_queue *q,
+ char __user *data, size_t count,
+ loff_t *ppos, int nonblocking);
+
+ ssize_t videobuf_read_stream(struct videobuf_queue *q,
+ char __user *data, size_t count,
+ loff_t *ppos, int vbihack, int nonblocking);
+
+Either one of these functions will read frame data into data, returning the
+amount actually read; the difference is that videobuf_read_one() will only
+read a single frame, while videobuf_read_stream() will read multiple frames
+if they are needed to satisfy the count requested by the application. A
+typical driver read() implementation will start the capture engine, call
+one of the above functions, then stop the engine before returning (though a
+smarter implementation might leave the engine running for a little while in
+anticipation of another read() call happening in the near future).
+
+The poll() function can usually be implemented with a direct call to:
+
+ unsigned int videobuf_poll_stream(struct file *file,
+ struct videobuf_queue *q,
+ poll_table *wait);
+
+Note that the actual wait queue eventually used will be the one associated
+with the first available buffer.
+
+When streaming I/O is done to kernel-space buffers, the driver must support
+the mmap() system call to enable user space to access the data. In many
+V4L2 drivers, the often-complex mmap() implementation simplifies to a
+single call to:
+
+ int videobuf_mmap_mapper(struct videobuf_queue *q,
+ struct vm_area_struct *vma);
+
+Everything else is handled by the videobuf code.
+
+The release() function requires two separate videobuf calls:
+
+ void videobuf_stop(struct videobuf_queue *q);
+ int videobuf_mmap_free(struct videobuf_queue *q);
+
+The call to videobuf_stop() terminates any I/O in progress - though it is
+still up to the driver to stop the capture engine. The call to
+videobuf_mmap_free() will ensure that all buffers have been unmapped; if
+so, they will all be passed to the buf_release() callback. If buffers
+remain mapped, videobuf_mmap_free() returns an error code instead. The
+purpose is clearly to cause the closing of the file descriptor to fail if
+buffers are still mapped, but every driver in the 2.6.32 kernel cheerfully
+ignores its return value.
+
+ioctl() operations
+
+The V4L2 API includes a very long list of driver callbacks to respond to
+the many ioctl() commands made available to user space. A number of these
+- those associated with streaming I/O - turn almost directly into videobuf
+calls. The relevant helper functions are:
+
+ int videobuf_reqbufs(struct videobuf_queue *q,
+ struct v4l2_requestbuffers *req);
+ int videobuf_querybuf(struct videobuf_queue *q, struct v4l2_buffer *b);
+ int videobuf_qbuf(struct videobuf_queue *q, struct v4l2_buffer *b);
+ int videobuf_dqbuf(struct videobuf_queue *q, struct v4l2_buffer *b,
+ int nonblocking);
+ int videobuf_streamon(struct videobuf_queue *q);
+ int videobuf_streamoff(struct videobuf_queue *q);
+ int videobuf_cgmbuf(struct videobuf_queue *q, struct video_mbuf *mbuf,
+ int count);
+
+So, for example, a VIDIOC_REQBUFS call turns into a call to the driver's
+vidioc_reqbufs() callback which, in turn, usually only needs to locate the
+proper struct videobuf_queue pointer and pass it to videobuf_reqbufs().
+These support functions can replace a great deal of buffer management
+boilerplate in a lot of V4L2 drivers.
+
+The vidioc_streamon() and vidioc_streamoff() functions will be a bit more
+complex, of course, since they will also need to deal with starting and
+stopping the capture engine. videobuf_cgmbuf(), called from the driver's
+vidiocgmbuf() function, only exists if the V4L1 compatibility module has
+been selected with CONFIG_VIDEO_V4L1_COMPAT, so its use must be surrounded
+with #ifdef directives.
+
+Buffer allocation
+
+Thus far, we have talked about buffers, but have not looked at how they are
+allocated. The scatter/gather case is the most complex on this front. For
+allocation, the driver can leave buffer allocation entirely up to the
+videobuf layer; in this case, buffers will be allocated as anonymous
+user-space pages and will be very scattered indeed. If the application is
+using user-space buffers, no allocation is needed; the videobuf layer will
+take care of calling get_user_pages() and filling in the scatterlist array.
+
+If the driver needs to do its own memory allocation, it should be done in
+the vidioc_reqbufs() function, *after* calling videobuf_reqbufs(). The
+first step is a call to:
+
+ struct videobuf_dmabuf *videobuf_to_dma(struct videobuf_buffer *buf);
+
+The returned videobuf_dmabuf structure (defined in
+<media/videobuf-dma-sg.h>) includes a couple of relevant fields:
+
+ struct scatterlist *sglist;
+ int sglen;
+
+The driver must allocate an appropriately-sized scatterlist array and
+populate it with pointers to the pieces of the allocated buffer; sglen
+should be set to the length of the array.
+
+Drivers using the vmalloc() method need not (and cannot) concern themselves
+with buffer allocation at all; videobuf will handle those details. The
+same is normally true of contiguous-DMA drivers as well; videobuf will
+allocate the buffers (with dma_alloc_coherent()) when it sees fit. That
+means that these drivers may be trying to do high-order allocations at any
+time, an operation which is not always guaranteed to work. Some drivers
+play tricks by allocating DMA space at system boot time; videobuf does not
+currently play well with those drivers.
+
+As of 2.6.31, contiguous-DMA drivers can work with a user-supplied buffer,
+as long as that buffer is physically contiguous. Normal user-space
+allocations will not meet that criterion, but buffers obtained from other
+kernel drivers, or those contained within huge pages, will work with these
+drivers.
+
+Filling the buffers
+
+The final part of a videobuf implementation has no direct callback - it's
+the portion of the code which actually puts frame data into the buffers,
+usually in response to interrupts from the device. For all types of
+drivers, this process works approximately as follows:
+
+ - Obtain the next available buffer and make sure that somebody is actually
+ waiting for it.
+
+ - Get a pointer to the memory and put video data there.
+
+ - Mark the buffer as done and wake up the process waiting for it.
+
+Step (1) above is done by looking at the driver-managed list_head structure
+- the one which is filled in the buf_queue() callback. Because starting
+the engine and enqueueing buffers are done in separate steps, it's possible
+for the engine to be running without any buffers available - in the
+vmalloc() case especially. So the driver should be prepared for the list
+to be empty. It is equally possible that nobody is yet interested in the
+buffer; the driver should not remove it from the list or fill it until a
+process is waiting on it. That test can be done by examining the buffer's
+done field (a wait_queue_head_t structure) with waitqueue_active().
+
+A buffer's state should be set to VIDEOBUF_ACTIVE before being mapped for
+DMA; that ensures that the videobuf layer will not try to do anything with
+it while the device is transferring data.
+
+For scatter/gather drivers, the needed memory pointers will be found in the
+scatterlist structure described above. Drivers using the vmalloc() method
+can get a memory pointer with:
+
+ void *videobuf_to_vmalloc(struct videobuf_buffer *buf);
+
+For contiguous DMA drivers, the function to use is:
+
+ dma_addr_t videobuf_to_dma_contig(struct videobuf_buffer *buf);
+
+The contiguous DMA API goes out of its way to hide the kernel-space address
+of the DMA buffer from drivers.
+
+The final step is to set the size field of the relevant videobuf_buffer
+structure to the actual size of the captured image, set state to
+VIDEOBUF_DONE, then call wake_up() on the done queue. At this point, the
+buffer is owned by the videobuf layer and the driver should not touch it
+again.
+
+Developers who are interested in more information can go into the relevant
+header files; there are a few low-level functions declared there which have
+not been talked about here. Also worthwhile is the vivi driver
+(drivers/media/video/vivi.c), which is maintained as an example of how V4L2
+drivers should be written. Vivi only uses the vmalloc() API, but it's good
+enough to get started with. Note also that all of these calls are exported
+GPL-only, so they will not be available to non-GPL kernel modules.
diff --git a/Documentation/video4linux/w9966.txt b/Documentation/video4linux/w9966.txt
index 78a651254b8..855024525fd 100644
--- a/Documentation/video4linux/w9966.txt
+++ b/Documentation/video4linux/w9966.txt
@@ -24,7 +24,7 @@ where every two pixels take 4 bytes. In SDL (www.libsdl.org) this format
is called VIDEO_PALETTE_YUV422 (16 bpp).
A minimal test application (with source) is available from:
- http://hem.fyristorg.com/mogul/w9966.html
+ http://www.slackwaresupport.com/howtos/Webcam-HOWTO
The slow framerate is due to missing DMA ECP read support in the
parport drivers. I might add working EPP support later.
diff --git a/Documentation/vm/00-INDEX b/Documentation/vm/00-INDEX
index e57d6a9dd32..dca82d7c83d 100644
--- a/Documentation/vm/00-INDEX
+++ b/Documentation/vm/00-INDEX
@@ -4,23 +4,35 @@ active_mm.txt
- An explanation from Linus about tsk->active_mm vs tsk->mm.
balance
- various information on memory balancing.
+hugepage-mmap.c
+ - Example app using huge page memory with the mmap system call.
+hugepage-shm.c
+ - Example app using huge page memory with Sys V shared memory system calls.
hugetlbpage.txt
- a brief summary of hugetlbpage support in the Linux kernel.
+hwpoison.txt
+ - explains what hwpoison is
ksm.txt
- how to use the Kernel Samepage Merging feature.
locking
- info on how locking and synchronization is done in the Linux vm code.
+map_hugetlb.c
+ - an example program that uses the MAP_HUGETLB mmap flag.
numa
- information about NUMA specific code in the Linux vm.
numa_memory_policy.txt
- documentation of concepts and APIs of the 2.6 memory policy support.
overcommit-accounting
- description of the Linux kernels overcommit handling modes.
+page-types.c
+ - Tool for querying page flags
page_migration
- description of page migration in NUMA systems.
+pagemap.txt
+ - pagemap, from the userspace perspective
slabinfo.c
- source code for a tool to get reports about slabs.
slub.txt
- a short users guide for SLUB.
-map_hugetlb.c
- - an example program that uses the MAP_HUGETLB mmap flag.
+unevictable-lru.txt
+ - Unevictable LRU infrastructure
diff --git a/Documentation/vm/Makefile b/Documentation/vm/Makefile
index 5bd269b3731..9dcff328b96 100644
--- a/Documentation/vm/Makefile
+++ b/Documentation/vm/Makefile
@@ -2,7 +2,7 @@
obj- := dummy.o
# List of programs to build
-hostprogs-y := slabinfo page-types
+hostprogs-y := slabinfo page-types hugepage-mmap hugepage-shm map_hugetlb
# Tell kbuild to always build the programs
always := $(hostprogs-y)
diff --git a/Documentation/vm/hugepage-mmap.c b/Documentation/vm/hugepage-mmap.c
new file mode 100644
index 00000000000..db0dd9a33d5
--- /dev/null
+++ b/Documentation/vm/hugepage-mmap.c
@@ -0,0 +1,91 @@
+/*
+ * hugepage-mmap:
+ *
+ * Example of using huge page memory in a user application using the mmap
+ * system call. Before running this application, make sure that the
+ * administrator has mounted the hugetlbfs filesystem (on some directory
+ * like /mnt) using the command mount -t hugetlbfs nodev /mnt. In this
+ * example, the app is requesting memory of size 256MB that is backed by
+ * huge pages.
+ *
+ * For the ia64 architecture, the Linux kernel reserves Region number 4 for
+ * huge pages. That means that if one requires a fixed address, a huge page
+ * aligned address starting with 0x800000... will be required. If a fixed
+ * address is not required, the kernel will select an address in the proper
+ * range.
+ * Other architectures, such as ppc64, i386 or x86_64 are not so constrained.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <sys/mman.h>
+#include <fcntl.h>
+
+#define FILE_NAME "/mnt/hugepagefile"
+#define LENGTH (256UL*1024*1024)
+#define PROTECTION (PROT_READ | PROT_WRITE)
+
+/* Only ia64 requires this */
+#ifdef __ia64__
+#define ADDR (void *)(0x8000000000000000UL)
+#define FLAGS (MAP_SHARED | MAP_FIXED)
+#else
+#define ADDR (void *)(0x0UL)
+#define FLAGS (MAP_SHARED)
+#endif
+
+static void check_bytes(char *addr)
+{
+ printf("First hex is %x\n", *((unsigned int *)addr));
+}
+
+static void write_bytes(char *addr)
+{
+ unsigned long i;
+
+ for (i = 0; i < LENGTH; i++)
+ *(addr + i) = (char)i;
+}
+
+static void read_bytes(char *addr)
+{
+ unsigned long i;
+
+ check_bytes(addr);
+ for (i = 0; i < LENGTH; i++)
+ if (*(addr + i) != (char)i) {
+ printf("Mismatch at %lu\n", i);
+ break;
+ }
+}
+
+int main(void)
+{
+ void *addr;
+ int fd;
+
+ fd = open(FILE_NAME, O_CREAT | O_RDWR, 0755);
+ if (fd < 0) {
+ perror("Open failed");
+ exit(1);
+ }
+
+ addr = mmap(ADDR, LENGTH, PROTECTION, FLAGS, fd, 0);
+ if (addr == MAP_FAILED) {
+ perror("mmap");
+ unlink(FILE_NAME);
+ exit(1);
+ }
+
+ printf("Returned address is %p\n", addr);
+ check_bytes(addr);
+ write_bytes(addr);
+ read_bytes(addr);
+
+ munmap(addr, LENGTH);
+ close(fd);
+ unlink(FILE_NAME);
+
+ return 0;
+}
diff --git a/Documentation/vm/hugepage-shm.c b/Documentation/vm/hugepage-shm.c
new file mode 100644
index 00000000000..07956d8592c
--- /dev/null
+++ b/Documentation/vm/hugepage-shm.c
@@ -0,0 +1,98 @@
+/*
+ * hugepage-shm:
+ *
+ * Example of using huge page memory in a user application using Sys V shared
+ * memory system calls. In this example the app is requesting 256MB of
+ * memory that is backed by huge pages. The application uses the flag
+ * SHM_HUGETLB in the shmget system call to inform the kernel that it is
+ * requesting huge pages.
+ *
+ * For the ia64 architecture, the Linux kernel reserves Region number 4 for
+ * huge pages. That means that if one requires a fixed address, a huge page
+ * aligned address starting with 0x800000... will be required. If a fixed
+ * address is not required, the kernel will select an address in the proper
+ * range.
+ * Other architectures, such as ppc64, i386 or x86_64 are not so constrained.
+ *
+ * Note: The default shared memory limit is quite low on many kernels,
+ * you may need to increase it via:
+ *
+ * echo 268435456 > /proc/sys/kernel/shmmax
+ *
+ * This will increase the maximum size per shared memory segment to 256MB.
+ * The other limit that you will hit eventually is shmall which is the
+ * total amount of shared memory in pages. To set it to 16GB on a system
+ * with a 4kB pagesize do:
+ *
+ * echo 4194304 > /proc/sys/kernel/shmall
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/ipc.h>
+#include <sys/shm.h>
+#include <sys/mman.h>
+
+#ifndef SHM_HUGETLB
+#define SHM_HUGETLB 04000
+#endif
+
+#define LENGTH (256UL*1024*1024)
+
+#define dprintf(x) printf(x)
+
+/* Only ia64 requires this */
+#ifdef __ia64__
+#define ADDR (void *)(0x8000000000000000UL)
+#define SHMAT_FLAGS (SHM_RND)
+#else
+#define ADDR (void *)(0x0UL)
+#define SHMAT_FLAGS (0)
+#endif
+
+int main(void)
+{
+ int shmid;
+ unsigned long i;
+ char *shmaddr;
+
+ if ((shmid = shmget(2, LENGTH,
+ SHM_HUGETLB | IPC_CREAT | SHM_R | SHM_W)) < 0) {
+ perror("shmget");
+ exit(1);
+ }
+ printf("shmid: 0x%x\n", shmid);
+
+ shmaddr = shmat(shmid, ADDR, SHMAT_FLAGS);
+ if (shmaddr == (char *)-1) {
+ perror("Shared memory attach failure");
+ shmctl(shmid, IPC_RMID, NULL);
+ exit(2);
+ }
+ printf("shmaddr: %p\n", shmaddr);
+
+ dprintf("Starting the writes:\n");
+ for (i = 0; i < LENGTH; i++) {
+ shmaddr[i] = (char)(i);
+ if (!(i % (1024 * 1024)))
+ dprintf(".");
+ }
+ dprintf("\n");
+
+ dprintf("Starting the Check...");
+ for (i = 0; i < LENGTH; i++)
+ if (shmaddr[i] != (char)i)
+ printf("\nIndex %lu mismatched\n", i);
+ dprintf("Done.\n");
+
+ if (shmdt((const void *)shmaddr) != 0) {
+ perror("Detach failure");
+ shmctl(shmid, IPC_RMID, NULL);
+ exit(3);
+ }
+
+ shmctl(shmid, IPC_RMID, NULL);
+
+ return 0;
+}
diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt
index bc31636973e..457634c1e03 100644
--- a/Documentation/vm/hugetlbpage.txt
+++ b/Documentation/vm/hugetlbpage.txt
@@ -299,176 +299,11 @@ map_hugetlb.c.
*******************************************************************
/*
- * Example of using huge page memory in a user application using Sys V shared
- * memory system calls. In this example the app is requesting 256MB of
- * memory that is backed by huge pages. The application uses the flag
- * SHM_HUGETLB in the shmget system call to inform the kernel that it is
- * requesting huge pages.
- *
- * For the ia64 architecture, the Linux kernel reserves Region number 4 for
- * huge pages. That means that if one requires a fixed address, a huge page
- * aligned address starting with 0x800000... will be required. If a fixed
- * address is not required, the kernel will select an address in the proper
- * range.
- * Other architectures, such as ppc64, i386 or x86_64 are not so constrained.
- *
- * Note: The default shared memory limit is quite low on many kernels,
- * you may need to increase it via:
- *
- * echo 268435456 > /proc/sys/kernel/shmmax
- *
- * This will increase the maximum size per shared memory segment to 256MB.
- * The other limit that you will hit eventually is shmall which is the
- * total amount of shared memory in pages. To set it to 16GB on a system
- * with a 4kB pagesize do:
- *
- * echo 4194304 > /proc/sys/kernel/shmall
+ * hugepage-shm: see Documentation/vm/hugepage-shm.c
*/
-#include <stdlib.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/ipc.h>
-#include <sys/shm.h>
-#include <sys/mman.h>
-
-#ifndef SHM_HUGETLB
-#define SHM_HUGETLB 04000
-#endif
-
-#define LENGTH (256UL*1024*1024)
-
-#define dprintf(x) printf(x)
-
-#define ADDR (void *)(0x0UL) /* let kernel choose address */
-#define SHMAT_FLAGS (0)
-
-int main(void)
-{
- int shmid;
- unsigned long i;
- char *shmaddr;
-
- if ((shmid = shmget(2, LENGTH,
- SHM_HUGETLB | IPC_CREAT | SHM_R | SHM_W)) < 0) {
- perror("shmget");
- exit(1);
- }
- printf("shmid: 0x%x\n", shmid);
-
- shmaddr = shmat(shmid, ADDR, SHMAT_FLAGS);
- if (shmaddr == (char *)-1) {
- perror("Shared memory attach failure");
- shmctl(shmid, IPC_RMID, NULL);
- exit(2);
- }
- printf("shmaddr: %p\n", shmaddr);
-
- dprintf("Starting the writes:\n");
- for (i = 0; i < LENGTH; i++) {
- shmaddr[i] = (char)(i);
- if (!(i % (1024 * 1024)))
- dprintf(".");
- }
- dprintf("\n");
-
- dprintf("Starting the Check...");
- for (i = 0; i < LENGTH; i++)
- if (shmaddr[i] != (char)i)
- printf("\nIndex %lu mismatched\n", i);
- dprintf("Done.\n");
-
- if (shmdt((const void *)shmaddr) != 0) {
- perror("Detach failure");
- shmctl(shmid, IPC_RMID, NULL);
- exit(3);
- }
-
- shmctl(shmid, IPC_RMID, NULL);
-
- return 0;
-}
*******************************************************************
/*
- * Example of using huge page memory in a user application using the mmap
- * system call. Before running this application, make sure that the
- * administrator has mounted the hugetlbfs filesystem (on some directory
- * like /mnt) using the command mount -t hugetlbfs nodev /mnt. In this
- * example, the app is requesting memory of size 256MB that is backed by
- * huge pages.
- *
- * For the ia64 architecture, the Linux kernel reserves Region number 4 for
- * huge pages. That means that if one requires a fixed address, a huge page
- * aligned address starting with 0x800000... will be required. If a fixed
- * address is not required, the kernel will select an address in the proper
- * range.
- * Other architectures, such as ppc64, i386 or x86_64 are not so constrained.
+ * hugepage-mmap: see Documentation/vm/hugepage-mmap.c
*/
-#include <stdlib.h>
-#include <stdio.h>
-#include <unistd.h>
-#include <sys/mman.h>
-#include <fcntl.h>
-
-#define FILE_NAME "/mnt/hugepagefile"
-#define LENGTH (256UL*1024*1024)
-#define PROTECTION (PROT_READ | PROT_WRITE)
-
-#define ADDR (void *)(0x0UL) /* let kernel choose address */
-#define FLAGS (MAP_SHARED)
-
-void check_bytes(char *addr)
-{
- printf("First hex is %x\n", *((unsigned int *)addr));
-}
-
-void write_bytes(char *addr)
-{
- unsigned long i;
-
- for (i = 0; i < LENGTH; i++)
- *(addr + i) = (char)i;
-}
-
-void read_bytes(char *addr)
-{
- unsigned long i;
-
- check_bytes(addr);
- for (i = 0; i < LENGTH; i++)
- if (*(addr + i) != (char)i) {
- printf("Mismatch at %lu\n", i);
- break;
- }
-}
-
-int main(void)
-{
- void *addr;
- int fd;
-
- fd = open(FILE_NAME, O_CREAT | O_RDWR, 0755);
- if (fd < 0) {
- perror("Open failed");
- exit(1);
- }
-
- addr = mmap(ADDR, LENGTH, PROTECTION, FLAGS, fd, 0);
- if (addr == MAP_FAILED) {
- perror("mmap");
- unlink(FILE_NAME);
- exit(1);
- }
-
- printf("Returned address is %p\n", addr);
- check_bytes(addr);
- write_bytes(addr);
- read_bytes(addr);
-
- munmap(addr, LENGTH);
- close(fd);
- unlink(FILE_NAME);
-
- return 0;
-}
diff --git a/Documentation/vm/map_hugetlb.c b/Documentation/vm/map_hugetlb.c
index e2bdae37f49..eda1a6d3578 100644
--- a/Documentation/vm/map_hugetlb.c
+++ b/Documentation/vm/map_hugetlb.c
@@ -19,7 +19,7 @@
#define PROTECTION (PROT_READ | PROT_WRITE)
#ifndef MAP_HUGETLB
-#define MAP_HUGETLB 0x40
+#define MAP_HUGETLB 0x40000 /* arch specific */
#endif
/* Only ia64 requires this */
@@ -31,12 +31,12 @@
#define FLAGS (MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB)
#endif
-void check_bytes(char *addr)
+static void check_bytes(char *addr)
{
printf("First hex is %x\n", *((unsigned int *)addr));
}
-void write_bytes(char *addr)
+static void write_bytes(char *addr)
{
unsigned long i;
@@ -44,7 +44,7 @@ void write_bytes(char *addr)
*(addr + i) = (char)i;
}
-void read_bytes(char *addr)
+static void read_bytes(char *addr)
{
unsigned long i;
diff --git a/Documentation/vm/numa b/Documentation/vm/numa
index e93ad9425e2..a200a386429 100644
--- a/Documentation/vm/numa
+++ b/Documentation/vm/numa
@@ -1,41 +1,149 @@
Started Nov 1999 by Kanoj Sarcar <kanoj@sgi.com>
-The intent of this file is to have an uptodate, running commentary
-from different people about NUMA specific code in the Linux vm.
-
-What is NUMA? It is an architecture where the memory access times
-for different regions of memory from a given processor varies
-according to the "distance" of the memory region from the processor.
-Each region of memory to which access times are the same from any
-cpu, is called a node. On such architectures, it is beneficial if
-the kernel tries to minimize inter node communications. Schemes
-for this range from kernel text and read-only data replication
-across nodes, and trying to house all the data structures that
-key components of the kernel need on memory on that node.
-
-Currently, all the numa support is to provide efficient handling
-of widely discontiguous physical memory, so architectures which
-are not NUMA but can have huge holes in the physical address space
-can use the same code. All this code is bracketed by CONFIG_DISCONTIGMEM.
-
-The initial port includes NUMAizing the bootmem allocator code by
-encapsulating all the pieces of information into a bootmem_data_t
-structure. Node specific calls have been added to the allocator.
-In theory, any platform which uses the bootmem allocator should
-be able to put the bootmem and mem_map data structures anywhere
-it deems best.
-
-Each node's page allocation data structures have also been encapsulated
-into a pg_data_t. The bootmem_data_t is just one part of this. To
-make the code look uniform between NUMA and regular UMA platforms,
-UMA platforms have a statically allocated pg_data_t too (contig_page_data).
-For the sake of uniformity, the function num_online_nodes() is also defined
-for all platforms. As we run benchmarks, we might decide to NUMAize
-more variables like low_on_memory, nr_free_pages etc into the pg_data_t.
-
-The NUMA aware page allocation code currently tries to allocate pages
-from different nodes in a round robin manner. This will be changed to
-do concentratic circle search, starting from current node, once the
-NUMA port achieves more maturity. The call alloc_pages_node has been
-added, so that drivers can make the call and not worry about whether
-it is running on a NUMA or UMA platform.
+What is NUMA?
+
+This question can be answered from a couple of perspectives: the
+hardware view and the Linux software view.
+
+From the hardware perspective, a NUMA system is a computer platform that
+comprises multiple components or assemblies each of which may contain 0
+or more CPUs, local memory, and/or IO buses. For brevity and to
+disambiguate the hardware view of these physical components/assemblies
+from the software abstraction thereof, we'll call the components/assemblies
+'cells' in this document.
+
+Each of the 'cells' may be viewed as an SMP [symmetric multi-processor] subset
+of the system--although some components necessary for a stand-alone SMP system
+may not be populated on any given cell. The cells of the NUMA system are
+connected together with some sort of system interconnect--e.g., a crossbar or
+point-to-point link are common types of NUMA system interconnects. Both of
+these types of interconnects can be aggregated to create NUMA platforms with
+cells at multiple distances from other cells.
+
+For Linux, the NUMA platforms of interest are primarily what is known as Cache
+Coherent NUMA or ccNUMA systems. With ccNUMA systems, all memory is visible
+to and accessible from any CPU attached to any cell and cache coherency
+is handled in hardware by the processor caches and/or the system interconnect.
+
+Memory access time and effective memory bandwidth varies depending on how far
+away the cell containing the CPU or IO bus making the memory access is from the
+cell containing the target memory. For example, access to memory by CPUs
+attached to the same cell will experience faster access times and higher
+bandwidths than accesses to memory on other, remote cells. NUMA platforms
+can have cells at multiple remote distances from any given cell.
+
+Platform vendors don't build NUMA systems just to make software developers'
+lives interesting. Rather, this architecture is a means to provide scalable
+memory bandwidth. However, to achieve scalable memory bandwidth, system and
+application software must arrange for a large majority of the memory references
+[cache misses] to be to "local" memory--memory on the same cell, if any--or
+to the closest cell with memory.
+
+This leads to the Linux software view of a NUMA system:
+
+Linux divides the system's hardware resources into multiple software
+abstractions called "nodes". Linux maps the nodes onto the physical cells
+of the hardware platform, abstracting away some of the details for some
+architectures. As with physical cells, software nodes may contain 0 or more
+CPUs, memory and/or IO buses. And, again, memory accesses to memory on
+"closer" nodes--nodes that map to closer cells--will generally experience
+faster access times and higher effective bandwidth than accesses to more
+remote cells.
+
+For some architectures, such as x86, Linux will "hide" any node representing a
+physical cell that has no memory attached, and reassign any CPUs attached to
+that cell to a node representing a cell that does have memory. Thus, on
+these architectures, one cannot assume that all CPUs that Linux associates with
+a given node will see the same local memory access times and bandwidth.
+
+In addition, for some architectures, again x86 is an example, Linux supports
+the emulation of additional nodes. For NUMA emulation, linux will carve up
+the existing nodes--or the system memory for non-NUMA platforms--into multiple
+nodes. Each emulated node will manage a fraction of the underlying cells'
+physical memory. NUMA emluation is useful for testing NUMA kernel and
+application features on non-NUMA platforms, and as a sort of memory resource
+management mechanism when used together with cpusets.
+[see Documentation/cgroups/cpusets.txt]
+
+For each node with memory, Linux constructs an independent memory management
+subsystem, complete with its own free page lists, in-use page lists, usage
+statistics and locks to mediate access. In addition, Linux constructs for
+each memory zone [one or more of DMA, DMA32, NORMAL, HIGH_MEMORY, MOVABLE],
+an ordered "zonelist". A zonelist specifies the zones/nodes to visit when a
+selected zone/node cannot satisfy the allocation request. This situation,
+when a zone has no available memory to satisfy a request, is called
+"overflow" or "fallback".
+
+Because some nodes contain multiple zones containing different types of
+memory, Linux must decide whether to order the zonelists such that allocations
+fall back to the same zone type on a different node, or to a different zone
+type on the same node. This is an important consideration because some zones,
+such as DMA or DMA32, represent relatively scarce resources. Linux chooses
+a default zonelist order based on the sizes of the various zone types relative
+to the total memory of the node and the total memory of the system. The
+default zonelist order may be overridden using the numa_zonelist_order kernel
+boot parameter or sysctl. [see Documentation/kernel-parameters.txt and
+Documentation/sysctl/vm.txt]
+
+By default, Linux will attempt to satisfy memory allocation requests from the
+node to which the CPU that executes the request is assigned. Specifically,
+Linux will attempt to allocate from the first node in the appropriate zonelist
+for the node where the request originates. This is called "local allocation."
+If the "local" node cannot satisfy the request, the kernel will examine other
+nodes' zones in the selected zonelist looking for the first zone in the list
+that can satisfy the request.
+
+Local allocation will tend to keep subsequent access to the allocated memory
+"local" to the underlying physical resources and off the system interconnect--
+as long as the task on whose behalf the kernel allocated some memory does not
+later migrate away from that memory. The Linux scheduler is aware of the
+NUMA topology of the platform--embodied in the "scheduling domains" data
+structures [see Documentation/scheduler/sched-domains.txt]--and the scheduler
+attempts to minimize task migration to distant scheduling domains. However,
+the scheduler does not take a task's NUMA footprint into account directly.
+Thus, under sufficient imbalance, tasks can migrate between nodes, remote
+from their initial node and kernel data structures.
+
+System administrators and application designers can restrict a task's migration
+to improve NUMA locality using various CPU affinity command line interfaces,
+such as taskset(1) and numactl(1), and program interfaces such as
+sched_setaffinity(2). Further, one can modify the kernel's default local
+allocation behavior using Linux NUMA memory policy.
+[see Documentation/vm/numa_memory_policy.]
+
+System administrators can restrict the CPUs and nodes' memories that a non-
+privileged user can specify in the scheduling or NUMA commands and functions
+using control groups and CPUsets. [see Documentation/cgroups/CPUsets.txt]
+
+On architectures that do not hide memoryless nodes, Linux will include only
+zones [nodes] with memory in the zonelists. This means that for a memoryless
+node the "local memory node"--the node of the first zone in CPU's node's
+zonelist--will not be the node itself. Rather, it will be the node that the
+kernel selected as the nearest node with memory when it built the zonelists.
+So, default, local allocations will succeed with the kernel supplying the
+closest available memory. This is a consequence of the same mechanism that
+allows such allocations to fallback to other nearby nodes when a node that
+does contain memory overflows.
+
+Some kernel allocations do not want or cannot tolerate this allocation fallback
+behavior. Rather they want to be sure they get memory from the specified node
+or get notified that the node has no free memory. This is usually the case when
+a subsystem allocates per CPU memory resources, for example.
+
+A typical model for making such an allocation is to obtain the node id of the
+node to which the "current CPU" is attached using one of the kernel's
+numa_node_id() or CPU_to_node() functions and then request memory from only
+the node id returned. When such an allocation fails, the requesting subsystem
+may revert to its own fallback path. The slab kernel memory allocator is an
+example of this. Or, the subsystem may choose to disable or not to enable
+itself on allocation failure. The kernel profiling subsystem is an example of
+this.
+
+If the architecture supports--does not hide--memoryless nodes, then CPUs
+attached to memoryless nodes would always incur the fallback path overhead
+or some subsystems would fail to initialize if they attempted to allocated
+memory exclusively from a node without memory. To support such
+architectures transparently, kernel subsystems can use the numa_mem_id()
+or cpu_to_mem() function to locate the "local memory node" for the calling or
+specified CPU. Again, this is the same node from which default, local page
+allocations will be attempted.
diff --git a/Documentation/vm/numa_memory_policy.txt b/Documentation/vm/numa_memory_policy.txt
index be45dbb9d7f..6690fc34ef6 100644
--- a/Documentation/vm/numa_memory_policy.txt
+++ b/Documentation/vm/numa_memory_policy.txt
@@ -45,7 +45,7 @@ most general to most specific:
to establish the task policy for a child task exec()'d from an
executable image that has no awareness of memory policy. See the
MEMORY POLICY APIS section, below, for an overview of the system call
- that a task may use to set/change it's task/process policy.
+ that a task may use to set/change its task/process policy.
In a multi-threaded task, task policies apply only to the thread
[Linux kernel task] that installs the policy and any threads
@@ -301,7 +301,7 @@ decrement this reference count, respectively. mpol_put() will only free
the structure back to the mempolicy kmem cache when the reference count
goes to zero.
-When a new memory policy is allocated, it's reference count is initialized
+When a new memory policy is allocated, its reference count is initialized
to '1', representing the reference held by the task that is installing the
new policy. When a pointer to a memory policy structure is stored in another
structure, another reference is added, as the task's reference will be dropped
diff --git a/Documentation/vm/page-types.c b/Documentation/vm/page-types.c
index 66e9358e214..cc96ee2666f 100644
--- a/Documentation/vm/page-types.c
+++ b/Documentation/vm/page-types.c
@@ -478,7 +478,7 @@ static void prepare_hwpoison_fd(void)
}
if (opt_unpoison && !hwpoison_forget_fd) {
- sprintf(buf, "%s/renew-pfn", hwpoison_debug_fs);
+ sprintf(buf, "%s/unpoison-pfn", hwpoison_debug_fs);
hwpoison_forget_fd = checked_open(buf, O_WRONLY);
}
}
@@ -694,7 +694,7 @@ static void usage(void)
#endif
" -l|--list Show page details in ranges\n"
" -L|--list-each Show page details one by one\n"
-" -N|--no-summary Don't show summay info\n"
+" -N|--no-summary Don't show summary info\n"
" -X|--hwpoison hwpoison pages\n"
" -x|--unpoison unpoison pages\n"
" -h|--help Show this usage message\n"
diff --git a/Documentation/vm/slub.txt b/Documentation/vm/slub.txt
index b37300edf27..07375e73981 100644
--- a/Documentation/vm/slub.txt
+++ b/Documentation/vm/slub.txt
@@ -41,6 +41,7 @@ Possible debug options are
P Poisoning (object and padding)
U User tracking (free and alloc)
T Trace (please only use on single slabs)
+ A Toggle failslab filter mark for the cache
O Switch debugging off for caches that would have
caused higher minimum slab orders
- Switch all debugging off (useful if the kernel is
diff --git a/Documentation/volatile-considered-harmful.txt b/Documentation/volatile-considered-harmful.txt
index 991c26a6ef6..db0cb228d64 100644
--- a/Documentation/volatile-considered-harmful.txt
+++ b/Documentation/volatile-considered-harmful.txt
@@ -63,9 +63,9 @@ way to perform a busy wait is:
cpu_relax();
The cpu_relax() call can lower CPU power consumption or yield to a
-hyperthreaded twin processor; it also happens to serve as a memory barrier,
-so, once again, volatile is unnecessary. Of course, busy-waiting is
-generally an anti-social act to begin with.
+hyperthreaded twin processor; it also happens to serve as a compiler
+barrier, so, once again, volatile is unnecessary. Of course, busy-
+waiting is generally an anti-social act to begin with.
There are still a few rare situations where volatile makes sense in the
kernel:
diff --git a/Documentation/voyager.txt b/Documentation/voyager.txt
deleted file mode 100644
index 2749af552cd..00000000000
--- a/Documentation/voyager.txt
+++ /dev/null
@@ -1,95 +0,0 @@
-Running Linux on the Voyager Architecture
-=========================================
-
-For full details and current project status, see
-
-http://www.hansenpartnership.com/voyager
-
-The voyager architecture was designed by NCR in the mid 80s to be a
-fully SMP capable RAS computing architecture built around intel's 486
-chip set. The voyager came in three levels of architectural
-sophistication: 3,4 and 5 --- 1 and 2 never made it out of prototype.
-The linux patches support only the Level 5 voyager architecture (any
-machine class 3435 and above).
-
-The Voyager Architecture
-------------------------
-
-Voyager machines consist of a Baseboard with a 386 diagnostic
-processor, a Power Supply Interface (PSI) a Primary and possibly
-Secondary Microchannel bus and between 2 and 20 voyager slots. The
-voyager slots can be populated with memory and cpu cards (up to 4GB
-memory and from 1 486 to 32 Pentium Pro processors). Internally, the
-voyager has a dual arbitrated system bus and a configuration and test
-bus (CAT). The voyager bus speed is 40MHz. Therefore (since all
-voyager cards are dual ported for each system bus) the maximum
-transfer rate is 320Mb/s but only if you have your slot configuration
-tuned (only memory cards can communicate with both busses at once, CPU
-cards utilise them one at a time).
-
-Voyager SMP
------------
-
-Since voyager was the first intel based SMP system, it is slightly
-more primitive than the Intel IO-APIC approach to SMP. Voyager allows
-arbitrary interrupt routing (including processor affinity routing) of
-all 16 PC type interrupts. However it does this by using a modified
-5259 master/slave chip set instead of an APIC bus. Additionally,
-voyager supports Cross Processor Interrupts (CPI) equivalent to the
-APIC IPIs. There are two routed voyager interrupt lines provided to
-each slot.
-
-Processor Cards
----------------
-
-These come in single, dyadic and quad configurations (the quads are
-problematic--see later). The maximum configuration is 8 quad cards
-for 32 way SMP.
-
-Quad Processors
----------------
-
-Because voyager only supplies two interrupt lines to each Processor
-card, the Quad processors have to be configured (and Bootstrapped) in
-as a pair of Master/Slave processors.
-
-In fact, most Quad cards only accept one VIC interrupt line, so they
-have one interrupt handling processor (called the VIC extended
-processor) and three non-interrupt handling processors.
-
-Current Status
---------------
-
-The System will boot on Mono, Dyad and Quad cards. There was
-originally a Quad boot problem which has been fixed by proper gdt
-alignment in the initial boot loader. If you still cannot get your
-voyager system to boot, email me at:
-
-<J.E.J.Bottomley@HansenPartnership.com>
-
-
-The Quad cards now support using the separate Quad CPI vectors instead
-of going through the VIC mailbox system.
-
-The Level 4 architecture (3430 and 3360 Machines) should also work
-fine.
-
-Dump Switch
------------
-
-The voyager dump switch sends out a broadcast NMI which the voyager
-code intercepts and does a task dump.
-
-Power Switch
-------------
-
-The front panel power switch is intercepted by the kernel and should
-cause a system shutdown and power off.
-
-A Note About Mixed CPU Systems
-------------------------------
-
-Linux isn't designed to handle mixed CPU systems very well. In order
-to get everything going you *must* make sure that your lowest
-capability CPU is used for booting. Also, mixing CPU classes
-(e.g. 486 and 586) is really not going to work very well at all.
diff --git a/Documentation/w1/masters/ds2482 b/Documentation/w1/masters/ds2482
index 299b91c7609..56f8edace6a 100644
--- a/Documentation/w1/masters/ds2482
+++ b/Documentation/w1/masters/ds2482
@@ -6,8 +6,8 @@ Supported chips:
Prefix: 'ds2482'
Addresses scanned: None
Datasheets:
- http://pdfserv.maxim-ic.com/en/ds/DS2482-100-DS2482S-100.pdf
- http://pdfserv.maxim-ic.com/en/ds/DS2482-800-DS2482S-800.pdf
+ http://datasheets.maxim-ic.com/en/ds/DS2482-100.pdf
+ http://datasheets.maxim-ic.com/en/ds/DS2482-800.pdf
Author: Ben Gardner <bgardner@wabtec.com>
diff --git a/Documentation/w1/masters/mxc-w1 b/Documentation/w1/masters/mxc-w1
index 97f6199a7f3..38be1ad6553 100644
--- a/Documentation/w1/masters/mxc-w1
+++ b/Documentation/w1/masters/mxc-w1
@@ -5,7 +5,8 @@ Supported chips:
* Freescale MX27, MX31 and probably other i.MX SoCs
Datasheets:
http://www.freescale.com/files/32bit/doc/data_sheet/MCIMX31.pdf?fpsp=1
- http://www.freescale.com/files/dsp/MCIMX27.pdf?fpsp=1
+ http://cache.freescale.com/files/dsp/doc/archive/MCIMX27.pdf?fsrch=1&WT_TYPE=
+ Data%20Sheets&WT_VENDOR=FREESCALE&WT_FILE_FORMAT=pdf&WT_ASSET=Documentation
Author: Originally based on Freescale code, prepared for mainline by
Sascha Hauer <s.hauer@pengutronix.de>
diff --git a/Documentation/w1/masters/omap-hdq b/Documentation/w1/masters/omap-hdq
index ca722e09b6a..884dc284b21 100644
--- a/Documentation/w1/masters/omap-hdq
+++ b/Documentation/w1/masters/omap-hdq
@@ -7,7 +7,7 @@ Supported chips:
A useful link about HDQ basics:
===============================
-http://focus.ti.com/lit/an/slua408/slua408.pdf
+http://focus.ti.com/lit/an/slua408a/slua408a.pdf
Description:
============
diff --git a/Documentation/w1/w1.generic b/Documentation/w1/w1.generic
index e3333eec432..212f4ac31c0 100644
--- a/Documentation/w1/w1.generic
+++ b/Documentation/w1/w1.generic
@@ -25,7 +25,7 @@ When a w1 master driver registers with the w1 subsystem, the following occurs:
- sysfs entries for that w1 master are created
- the w1 bus is periodically searched for new slave devices
-When a device is found on the bus, w1 core checks if driver for it's family is
+When a device is found on the bus, w1 core checks if driver for its family is
loaded. If so, the family driver is attached to the slave.
If there is no driver for the family, default one is assigned, which allows to perform
almost any kind of operations. Each logical operation is a transaction
diff --git a/Documentation/watchdog/00-INDEX b/Documentation/watchdog/00-INDEX
index c3ea47e507f..ee994513a9b 100644
--- a/Documentation/watchdog/00-INDEX
+++ b/Documentation/watchdog/00-INDEX
@@ -1,10 +1,15 @@
00-INDEX
- this file.
+hpwdt.txt
+ - information on the HP iLO2 NMI watchdog
pcwd-watchdog.txt
- documentation for Berkshire Products PC Watchdog ISA cards.
src/
- directory holding watchdog related example programs.
watchdog-api.txt
- description of the Linux Watchdog driver API.
+watchdog-parameters.txt
+ - information on driver parameters (for drivers other than
+ the ones that have driver-specific files here)
wdt.txt
- description of the Watchdog Timer Interfaces for Linux.
diff --git a/Documentation/watchdog/src/watchdog-simple.c b/Documentation/watchdog/src/watchdog-simple.c
index 4cf72f3fa8e..ba45803a221 100644
--- a/Documentation/watchdog/src/watchdog-simple.c
+++ b/Documentation/watchdog/src/watchdog-simple.c
@@ -17,9 +17,6 @@ int main(void)
ret = -1;
break;
}
- ret = fsync(fd);
- if (ret)
- break;
sleep(10);
}
close(fd);
diff --git a/Documentation/watchdog/src/watchdog-test.c b/Documentation/watchdog/src/watchdog-test.c
index a750532ffcf..63fdc34ceb9 100644
--- a/Documentation/watchdog/src/watchdog-test.c
+++ b/Documentation/watchdog/src/watchdog-test.c
@@ -31,6 +31,8 @@ static void keep_alive(void)
*/
int main(int argc, char *argv[])
{
+ int flags;
+
fd = open("/dev/watchdog", O_WRONLY);
if (fd == -1) {
@@ -41,12 +43,14 @@ int main(int argc, char *argv[])
if (argc > 1) {
if (!strncasecmp(argv[1], "-d", 2)) {
- ioctl(fd, WDIOC_SETOPTIONS, WDIOS_DISABLECARD);
+ flags = WDIOS_DISABLECARD;
+ ioctl(fd, WDIOC_SETOPTIONS, &flags);
fprintf(stderr, "Watchdog card disabled.\n");
fflush(stderr);
exit(0);
} else if (!strncasecmp(argv[1], "-e", 2)) {
- ioctl(fd, WDIOC_SETOPTIONS, WDIOS_ENABLECARD);
+ flags = WDIOS_ENABLECARD;
+ ioctl(fd, WDIOC_SETOPTIONS, &flags);
fprintf(stderr, "Watchdog card enabled.\n");
fflush(stderr);
exit(0);
diff --git a/Documentation/watchdog/watchdog-api.txt b/Documentation/watchdog/watchdog-api.txt
index 4cc4ba9d715..eb7132ed8bb 100644
--- a/Documentation/watchdog/watchdog-api.txt
+++ b/Documentation/watchdog/watchdog-api.txt
@@ -222,11 +222,10 @@ returned value is the temperature in degrees fahrenheit.
ioctl(fd, WDIOC_GETTEMP, &temperature);
Finally the SETOPTIONS ioctl can be used to control some aspects of
-the cards operation; right now the pcwd driver is the only one
-supporting this ioctl.
+the cards operation.
int options = 0;
- ioctl(fd, WDIOC_SETOPTIONS, options);
+ ioctl(fd, WDIOC_SETOPTIONS, &options);
The following options are available:
diff --git a/Documentation/watchdog/watchdog-parameters.txt b/Documentation/watchdog/watchdog-parameters.txt
new file mode 100644
index 00000000000..17ddd822b45
--- /dev/null
+++ b/Documentation/watchdog/watchdog-parameters.txt
@@ -0,0 +1,395 @@
+This file provides information on the module parameters of many of
+the Linux watchdog drivers. Watchdog driver parameter specs should
+be listed here unless the driver has its own driver-specific information
+file.
+
+
+See Documentation/kernel-parameters.txt for information on
+providing kernel parameters for builtin drivers versus loadable
+modules.
+
+
+-------------------------------------------------
+acquirewdt:
+wdt_stop: Acquire WDT 'stop' io port (default 0x43)
+wdt_start: Acquire WDT 'start' io port (default 0x443)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+advantechwdt:
+wdt_stop: Advantech WDT 'stop' io port (default 0x443)
+wdt_start: Advantech WDT 'start' io port (default 0x443)
+timeout: Watchdog timeout in seconds. 1<= timeout <=63, default=60.
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+alim1535_wdt:
+timeout: Watchdog timeout in seconds. (0 < timeout < 18000, default=60
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+alim7101_wdt:
+timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=30
+use_gpio: Use the gpio watchdog (required by old cobalt boards).
+ default=0/off/no
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+ar7_wdt:
+margin: Watchdog margin in seconds (default=60)
+nowayout: Disable watchdog shutdown on close
+ (default=kernel config parameter)
+-------------------------------------------------
+at32ap700x_wdt:
+timeout: Timeout value. Limited to be 1 or 2 seconds. (default=2)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+at91rm9200_wdt:
+wdt_time: Watchdog time in seconds. (default=5)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+at91sam9_wdt:
+heartbeat: Watchdog heartbeats in seconds. (default = 15)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+bcm47xx_wdt:
+wdt_time: Watchdog time in seconds. (default=30)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+bfin_wdt:
+timeout: Watchdog timeout in seconds. (1<=timeout<=((2^32)/SCLK), default=20)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+coh901327_wdt:
+margin: Watchdog margin in seconds (default 60s)
+-------------------------------------------------
+cpu5wdt:
+port: base address of watchdog card, default is 0x91
+verbose: be verbose, default is 0 (no)
+ticks: count down ticks, default is 10000
+-------------------------------------------------
+cpwd:
+wd0_timeout: Default watchdog0 timeout in 1/10secs
+wd1_timeout: Default watchdog1 timeout in 1/10secs
+wd2_timeout: Default watchdog2 timeout in 1/10secs
+-------------------------------------------------
+davinci_wdt:
+heartbeat: Watchdog heartbeat period in seconds from 1 to 600, default 60
+-------------------------------------------------
+ep93xx_wdt:
+nowayout: Watchdog cannot be stopped once started
+timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=TBD)
+-------------------------------------------------
+eurotechwdt:
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+io: Eurotech WDT io port (default=0x3f0)
+irq: Eurotech WDT irq (default=10)
+ev: Eurotech WDT event type (default is `int')
+-------------------------------------------------
+gef_wdt:
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+geodewdt:
+timeout: Watchdog timeout in seconds. 1<= timeout <=131, default=60.
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+i6300esb:
+heartbeat: Watchdog heartbeat in seconds. (1<heartbeat<2046, default=30)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+iTCO_wdt:
+heartbeat: Watchdog heartbeat in seconds.
+ (2<heartbeat<39 (TCO v1) or 613 (TCO v2), default=30)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+iTCO_vendor_support:
+vendorsupport: iTCO vendor specific support mode, default=0 (none),
+ 1=SuperMicro Pent3, 2=SuperMicro Pent4+, 911=Broken SMI BIOS
+-------------------------------------------------
+ib700wdt:
+timeout: Watchdog timeout in seconds. 0<= timeout <=30, default=30.
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+ibmasr:
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+imx2_wdt:
+timeout: Watchdog timeout in seconds (default 60 s)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+indydog:
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+iop_wdt:
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+it8712f_wdt:
+margin: Watchdog margin in seconds (default 60)
+nowayout: Disable watchdog shutdown on close
+ (default=kernel config parameter)
+-------------------------------------------------
+it87_wdt:
+nogameport: Forbid the activation of game port, default=0
+exclusive: Watchdog exclusive device open, default=1
+timeout: Watchdog timeout in seconds, default=60
+testmode: Watchdog test mode (1 = no reboot), default=0
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+ixp2000_wdt:
+heartbeat: Watchdog heartbeat in seconds (default 60s)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+ixp4xx_wdt:
+heartbeat: Watchdog heartbeat in seconds (default 60s)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+ks8695_wdt:
+wdt_time: Watchdog time in seconds. (default=5)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+machzwd:
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+action: after watchdog resets, generate:
+ 0 = RESET(*) 1 = SMI 2 = NMI 3 = SCI
+-------------------------------------------------
+max63xx_wdt:
+heartbeat: Watchdog heartbeat period in seconds from 1 to 60, default 60
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+nodelay: Force selection of a timeout setting without initial delay
+ (max6373/74 only, default=0)
+-------------------------------------------------
+mixcomwd:
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+mpc8xxx_wdt:
+timeout: Watchdog timeout in ticks. (0<timeout<65536, default=65535)
+reset: Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+mpcore_wdt:
+mpcore_margin: MPcore timer margin in seconds.
+ (0 < mpcore_margin < 65536, default=60)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+mpcore_noboot: MPcore watchdog action, set to 1 to ignore reboots,
+ 0 to reboot (default=0
+-------------------------------------------------
+mv64x60_wdt:
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+nuc900_wdt:
+heartbeat: Watchdog heartbeats in seconds.
+ (default = 15)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+omap_wdt:
+timer_margin: initial watchdog timeout (in seconds)
+-------------------------------------------------
+orion_wdt:
+heartbeat: Initial watchdog heartbeat in seconds
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+pc87413_wdt:
+io: pc87413 WDT I/O port (default: io).
+timeout: Watchdog timeout in minutes (default=timeout).
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+pika_wdt:
+heartbeat: Watchdog heartbeats in seconds. (default = 15)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+pnx4008_wdt:
+heartbeat: Watchdog heartbeat period in seconds from 1 to 60, default 19
+nowayout: Set to 1 to keep watchdog running after device release
+-------------------------------------------------
+pnx833x_wdt:
+timeout: Watchdog timeout in Mhz. (68Mhz clock), default=2040000000 (30 seconds)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+start_enabled: Watchdog is started on module insertion (default=1)
+-------------------------------------------------
+rc32434_wdt:
+timeout: Watchdog timeout value, in seconds (default=20)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+riowd:
+riowd_timeout: Watchdog timeout in minutes (default=1)
+-------------------------------------------------
+s3c2410_wdt:
+tmr_margin: Watchdog tmr_margin in seconds. (default=15)
+tmr_atboot: Watchdog is started at boot time if set to 1, default=0
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+soft_noboot: Watchdog action, set to 1 to ignore reboots, 0 to reboot
+debug: Watchdog debug, set to >1 for debug, (default 0)
+-------------------------------------------------
+sa1100_wdt:
+margin: Watchdog margin in seconds (default 60s)
+-------------------------------------------------
+sb_wdog:
+timeout: Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs)
+-------------------------------------------------
+sbc60xxwdt:
+wdt_stop: SBC60xx WDT 'stop' io port (default 0x45)
+wdt_start: SBC60xx WDT 'start' io port (default 0x443)
+timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=30)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+sbc7240_wdt:
+timeout: Watchdog timeout in seconds. (1<=timeout<=255, default=30)
+nowayout: Disable watchdog when closing device file
+-------------------------------------------------
+sbc8360:
+timeout: Index into timeout table (0-63) (default=27 (60s))
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+sbc_epx_c3:
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+sbc_fitpc2_wdt:
+margin: Watchdog margin in seconds (default 60s)
+nowayout: Watchdog cannot be stopped once started
+-------------------------------------------------
+sc1200wdt:
+isapnp: When set to 0 driver ISA PnP support will be disabled (default=1)
+io: io port
+timeout: range is 0-255 minutes, default is 1
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+sc520_wdt:
+timeout: Watchdog timeout in seconds. (1 <= timeout <= 3600, default=30)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+sch311x_wdt:
+force_id: Override the detected device ID
+therm_trip: Should a ThermTrip trigger the reset generator
+timeout: Watchdog timeout in seconds. 1<= timeout <=15300, default=60
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+scx200_wdt:
+margin: Watchdog margin in seconds
+nowayout: Disable watchdog shutdown on close
+-------------------------------------------------
+shwdt:
+clock_division_ratio: Clock division ratio. Valid ranges are from 0x5 (1.31ms)
+ to 0x7 (5.25ms). (default=7)
+heartbeat: Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=30
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+smsc37b787_wdt:
+timeout: range is 1-255 units, default is 60
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+softdog:
+soft_margin: Watchdog soft_margin in seconds.
+ (0 < soft_margin < 65536, default=60)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+soft_noboot: Softdog action, set to 1 to ignore reboots, 0 to reboot
+ (default=0)
+-------------------------------------------------
+stmp3xxx_wdt:
+heartbeat: Watchdog heartbeat period in seconds from 1 to 4194304, default 19
+-------------------------------------------------
+ts72xx_wdt:
+timeout: Watchdog timeout in seconds. (1 <= timeout <= 8, default=8)
+nowayout: Disable watchdog shutdown on close
+-------------------------------------------------
+twl4030_wdt:
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+txx9wdt:
+timeout: Watchdog timeout in seconds. (0<timeout<N, default=60)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+w83627hf_wdt:
+wdt_io: w83627hf/thf WDT io port (default 0x2E)
+timeout: Watchdog timeout in seconds. 1 <= timeout <= 255, default=60.
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+w83697hf_wdt:
+wdt_io: w83697hf/hg WDT io port (default 0x2e, 0 = autodetect)
+timeout: Watchdog timeout in seconds. 1<= timeout <=255 (default=60)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+early_disable: Watchdog gets disabled at boot time (default=1)
+-------------------------------------------------
+w83697ug_wdt:
+wdt_io: w83697ug/uf WDT io port (default 0x2e)
+timeout: Watchdog timeout in seconds. 1<= timeout <=255 (default=60)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+w83877f_wdt:
+timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=30)
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+w83977f_wdt:
+timeout: Watchdog timeout in seconds (15..7635), default=45)
+testmode: Watchdog testmode (1 = no reboot), default=0
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+wafer5823wdt:
+timeout: Watchdog timeout in seconds. 1 <= timeout <= 255, default=60.
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+wdt285:
+soft_margin: Watchdog timeout in seconds (default=60)
+-------------------------------------------------
+wdt977:
+timeout: Watchdog timeout in seconds (60..15300, default=60)
+testmode: Watchdog testmode (1 = no reboot), default=0
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+wm831x_wdt:
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
+wm8350_wdt:
+nowayout: Watchdog cannot be stopped once started
+ (default=kernel config parameter)
+-------------------------------------------------
diff --git a/Documentation/watchdog/wdt.txt b/Documentation/watchdog/wdt.txt
index 03fd756d976..061c2e35384 100644
--- a/Documentation/watchdog/wdt.txt
+++ b/Documentation/watchdog/wdt.txt
@@ -14,14 +14,22 @@ reboot will depend on the state of the machines and interrupts. The hardware
boards physically pull the machine down off their own onboard timers and
will reboot from almost anything.
-A second temperature monitoring interface is available on the WDT501P cards
+A second temperature monitoring interface is available on the WDT501P cards.
This provides /dev/temperature. This is the machine internal temperature in
degrees Fahrenheit. Each read returns a single byte giving the temperature.
The third interface logs kernel messages on additional alert events.
-The wdt card cannot be safely probed for. Instead you need to pass
-wdt=ioaddr,irq as a boot parameter - eg "wdt=0x240,11".
+The ICS ISA-bus wdt card cannot be safely probed for. Instead you need to
+pass IO address and IRQ boot parameters. E.g.:
+ wdt.io=0x240 wdt.irq=11
+
+Other "wdt" driver parameters are:
+ heartbeat Watchdog heartbeat in seconds (default 60)
+ nowayout Watchdog cannot be stopped once started (kernel
+ build parameter)
+ tachometer WDT501-P Fan Tachometer support (0=disable, default=0)
+ type WDT501-P Card type (500 or 501, default=500)
Features
--------
@@ -40,4 +48,3 @@ Minor numbers are however allocated for it.
Example Watchdog Driver: see Documentation/watchdog/src/watchdog-simple.c
-
diff --git a/Documentation/workqueue.txt b/Documentation/workqueue.txt
new file mode 100644
index 00000000000..e4498a2872c
--- /dev/null
+++ b/Documentation/workqueue.txt
@@ -0,0 +1,380 @@
+
+Concurrency Managed Workqueue (cmwq)
+
+September, 2010 Tejun Heo <tj@kernel.org>
+ Florian Mickler <florian@mickler.org>
+
+CONTENTS
+
+1. Introduction
+2. Why cmwq?
+3. The Design
+4. Application Programming Interface (API)
+5. Example Execution Scenarios
+6. Guidelines
+
+
+1. Introduction
+
+There are many cases where an asynchronous process execution context
+is needed and the workqueue (wq) API is the most commonly used
+mechanism for such cases.
+
+When such an asynchronous execution context is needed, a work item
+describing which function to execute is put on a queue. An
+independent thread serves as the asynchronous execution context. The
+queue is called workqueue and the thread is called worker.
+
+While there are work items on the workqueue the worker executes the
+functions associated with the work items one after the other. When
+there is no work item left on the workqueue the worker becomes idle.
+When a new work item gets queued, the worker begins executing again.
+
+
+2. Why cmwq?
+
+In the original wq implementation, a multi threaded (MT) wq had one
+worker thread per CPU and a single threaded (ST) wq had one worker
+thread system-wide. A single MT wq needed to keep around the same
+number of workers as the number of CPUs. The kernel grew a lot of MT
+wq users over the years and with the number of CPU cores continuously
+rising, some systems saturated the default 32k PID space just booting
+up.
+
+Although MT wq wasted a lot of resource, the level of concurrency
+provided was unsatisfactory. The limitation was common to both ST and
+MT wq albeit less severe on MT. Each wq maintained its own separate
+worker pool. A MT wq could provide only one execution context per CPU
+while a ST wq one for the whole system. Work items had to compete for
+those very limited execution contexts leading to various problems
+including proneness to deadlocks around the single execution context.
+
+The tension between the provided level of concurrency and resource
+usage also forced its users to make unnecessary tradeoffs like libata
+choosing to use ST wq for polling PIOs and accepting an unnecessary
+limitation that no two polling PIOs can progress at the same time. As
+MT wq don't provide much better concurrency, users which require
+higher level of concurrency, like async or fscache, had to implement
+their own thread pool.
+
+Concurrency Managed Workqueue (cmwq) is a reimplementation of wq with
+focus on the following goals.
+
+* Maintain compatibility with the original workqueue API.
+
+* Use per-CPU unified worker pools shared by all wq to provide
+ flexible level of concurrency on demand without wasting a lot of
+ resource.
+
+* Automatically regulate worker pool and level of concurrency so that
+ the API users don't need to worry about such details.
+
+
+3. The Design
+
+In order to ease the asynchronous execution of functions a new
+abstraction, the work item, is introduced.
+
+A work item is a simple struct that holds a pointer to the function
+that is to be executed asynchronously. Whenever a driver or subsystem
+wants a function to be executed asynchronously it has to set up a work
+item pointing to that function and queue that work item on a
+workqueue.
+
+Special purpose threads, called worker threads, execute the functions
+off of the queue, one after the other. If no work is queued, the
+worker threads become idle. These worker threads are managed in so
+called thread-pools.
+
+The cmwq design differentiates between the user-facing workqueues that
+subsystems and drivers queue work items on and the backend mechanism
+which manages thread-pool and processes the queued work items.
+
+The backend is called gcwq. There is one gcwq for each possible CPU
+and one gcwq to serve work items queued on unbound workqueues.
+
+Subsystems and drivers can create and queue work items through special
+workqueue API functions as they see fit. They can influence some
+aspects of the way the work items are executed by setting flags on the
+workqueue they are putting the work item on. These flags include
+things like CPU locality, reentrancy, concurrency limits and more. To
+get a detailed overview refer to the API description of
+alloc_workqueue() below.
+
+When a work item is queued to a workqueue, the target gcwq is
+determined according to the queue parameters and workqueue attributes
+and appended on the shared worklist of the gcwq. For example, unless
+specifically overridden, a work item of a bound workqueue will be
+queued on the worklist of exactly that gcwq that is associated to the
+CPU the issuer is running on.
+
+For any worker pool implementation, managing the concurrency level
+(how many execution contexts are active) is an important issue. cmwq
+tries to keep the concurrency at a minimal but sufficient level.
+Minimal to save resources and sufficient in that the system is used at
+its full capacity.
+
+Each gcwq bound to an actual CPU implements concurrency management by
+hooking into the scheduler. The gcwq is notified whenever an active
+worker wakes up or sleeps and keeps track of the number of the
+currently runnable workers. Generally, work items are not expected to
+hog a CPU and consume many cycles. That means maintaining just enough
+concurrency to prevent work processing from stalling should be
+optimal. As long as there are one or more runnable workers on the
+CPU, the gcwq doesn't start execution of a new work, but, when the
+last running worker goes to sleep, it immediately schedules a new
+worker so that the CPU doesn't sit idle while there are pending work
+items. This allows using a minimal number of workers without losing
+execution bandwidth.
+
+Keeping idle workers around doesn't cost other than the memory space
+for kthreads, so cmwq holds onto idle ones for a while before killing
+them.
+
+For an unbound wq, the above concurrency management doesn't apply and
+the gcwq for the pseudo unbound CPU tries to start executing all work
+items as soon as possible. The responsibility of regulating
+concurrency level is on the users. There is also a flag to mark a
+bound wq to ignore the concurrency management. Please refer to the
+API section for details.
+
+Forward progress guarantee relies on that workers can be created when
+more execution contexts are necessary, which in turn is guaranteed
+through the use of rescue workers. All work items which might be used
+on code paths that handle memory reclaim are required to be queued on
+wq's that have a rescue-worker reserved for execution under memory
+pressure. Else it is possible that the thread-pool deadlocks waiting
+for execution contexts to free up.
+
+
+4. Application Programming Interface (API)
+
+alloc_workqueue() allocates a wq. The original create_*workqueue()
+functions are deprecated and scheduled for removal. alloc_workqueue()
+takes three arguments - @name, @flags and @max_active. @name is the
+name of the wq and also used as the name of the rescuer thread if
+there is one.
+
+A wq no longer manages execution resources but serves as a domain for
+forward progress guarantee, flush and work item attributes. @flags
+and @max_active control how work items are assigned execution
+resources, scheduled and executed.
+
+@flags:
+
+ WQ_NON_REENTRANT
+
+ By default, a wq guarantees non-reentrance only on the same
+ CPU. A work item may not be executed concurrently on the same
+ CPU by multiple workers but is allowed to be executed
+ concurrently on multiple CPUs. This flag makes sure
+ non-reentrance is enforced across all CPUs. Work items queued
+ to a non-reentrant wq are guaranteed to be executed by at most
+ one worker system-wide at any given time.
+
+ WQ_UNBOUND
+
+ Work items queued to an unbound wq are served by a special
+ gcwq which hosts workers which are not bound to any specific
+ CPU. This makes the wq behave as a simple execution context
+ provider without concurrency management. The unbound gcwq
+ tries to start execution of work items as soon as possible.
+ Unbound wq sacrifices locality but is useful for the following
+ cases.
+
+ * Wide fluctuation in the concurrency level requirement is
+ expected and using bound wq may end up creating large number
+ of mostly unused workers across different CPUs as the issuer
+ hops through different CPUs.
+
+ * Long running CPU intensive workloads which can be better
+ managed by the system scheduler.
+
+ WQ_FREEZEABLE
+
+ A freezeable wq participates in the freeze phase of the system
+ suspend operations. Work items on the wq are drained and no
+ new work item starts execution until thawed.
+
+ WQ_RESCUER
+
+ All wq which might be used in the memory reclaim paths _MUST_
+ have this flag set. This reserves one worker exclusively for
+ the execution of this wq under memory pressure.
+
+ WQ_HIGHPRI
+
+ Work items of a highpri wq are queued at the head of the
+ worklist of the target gcwq and start execution regardless of
+ the current concurrency level. In other words, highpri work
+ items will always start execution as soon as execution
+ resource is available.
+
+ Ordering among highpri work items is preserved - a highpri
+ work item queued after another highpri work item will start
+ execution after the earlier highpri work item starts.
+
+ Although highpri work items are not held back by other
+ runnable work items, they still contribute to the concurrency
+ level. Highpri work items in runnable state will prevent
+ non-highpri work items from starting execution.
+
+ This flag is meaningless for unbound wq.
+
+ WQ_CPU_INTENSIVE
+
+ Work items of a CPU intensive wq do not contribute to the
+ concurrency level. In other words, runnable CPU intensive
+ work items will not prevent other work items from starting
+ execution. This is useful for bound work items which are
+ expected to hog CPU cycles so that their execution is
+ regulated by the system scheduler.
+
+ Although CPU intensive work items don't contribute to the
+ concurrency level, start of their executions is still
+ regulated by the concurrency management and runnable
+ non-CPU-intensive work items can delay execution of CPU
+ intensive work items.
+
+ This flag is meaningless for unbound wq.
+
+ WQ_HIGHPRI | WQ_CPU_INTENSIVE
+
+ This combination makes the wq avoid interaction with
+ concurrency management completely and behave as a simple
+ per-CPU execution context provider. Work items queued on a
+ highpri CPU-intensive wq start execution as soon as resources
+ are available and don't affect execution of other work items.
+
+@max_active:
+
+@max_active determines the maximum number of execution contexts per
+CPU which can be assigned to the work items of a wq. For example,
+with @max_active of 16, at most 16 work items of the wq can be
+executing at the same time per CPU.
+
+Currently, for a bound wq, the maximum limit for @max_active is 512
+and the default value used when 0 is specified is 256. For an unbound
+wq, the limit is higher of 512 and 4 * num_possible_cpus(). These
+values are chosen sufficiently high such that they are not the
+limiting factor while providing protection in runaway cases.
+
+The number of active work items of a wq is usually regulated by the
+users of the wq, more specifically, by how many work items the users
+may queue at the same time. Unless there is a specific need for
+throttling the number of active work items, specifying '0' is
+recommended.
+
+Some users depend on the strict execution ordering of ST wq. The
+combination of @max_active of 1 and WQ_UNBOUND is used to achieve this
+behavior. Work items on such wq are always queued to the unbound gcwq
+and only one work item can be active at any given time thus achieving
+the same ordering property as ST wq.
+
+
+5. Example Execution Scenarios
+
+The following example execution scenarios try to illustrate how cmwq
+behave under different configurations.
+
+ Work items w0, w1, w2 are queued to a bound wq q0 on the same CPU.
+ w0 burns CPU for 5ms then sleeps for 10ms then burns CPU for 5ms
+ again before finishing. w1 and w2 burn CPU for 5ms then sleep for
+ 10ms.
+
+Ignoring all other tasks, works and processing overhead, and assuming
+simple FIFO scheduling, the following is one highly simplified version
+of possible sequences of events with the original wq.
+
+ TIME IN MSECS EVENT
+ 0 w0 starts and burns CPU
+ 5 w0 sleeps
+ 15 w0 wakes up and burns CPU
+ 20 w0 finishes
+ 20 w1 starts and burns CPU
+ 25 w1 sleeps
+ 35 w1 wakes up and finishes
+ 35 w2 starts and burns CPU
+ 40 w2 sleeps
+ 50 w2 wakes up and finishes
+
+And with cmwq with @max_active >= 3,
+
+ TIME IN MSECS EVENT
+ 0 w0 starts and burns CPU
+ 5 w0 sleeps
+ 5 w1 starts and burns CPU
+ 10 w1 sleeps
+ 10 w2 starts and burns CPU
+ 15 w2 sleeps
+ 15 w0 wakes up and burns CPU
+ 20 w0 finishes
+ 20 w1 wakes up and finishes
+ 25 w2 wakes up and finishes
+
+If @max_active == 2,
+
+ TIME IN MSECS EVENT
+ 0 w0 starts and burns CPU
+ 5 w0 sleeps
+ 5 w1 starts and burns CPU
+ 10 w1 sleeps
+ 15 w0 wakes up and burns CPU
+ 20 w0 finishes
+ 20 w1 wakes up and finishes
+ 20 w2 starts and burns CPU
+ 25 w2 sleeps
+ 35 w2 wakes up and finishes
+
+Now, let's assume w1 and w2 are queued to a different wq q1 which has
+WQ_HIGHPRI set,
+
+ TIME IN MSECS EVENT
+ 0 w1 and w2 start and burn CPU
+ 5 w1 sleeps
+ 10 w2 sleeps
+ 10 w0 starts and burns CPU
+ 15 w0 sleeps
+ 15 w1 wakes up and finishes
+ 20 w2 wakes up and finishes
+ 25 w0 wakes up and burns CPU
+ 30 w0 finishes
+
+If q1 has WQ_CPU_INTENSIVE set,
+
+ TIME IN MSECS EVENT
+ 0 w0 starts and burns CPU
+ 5 w0 sleeps
+ 5 w1 and w2 start and burn CPU
+ 10 w1 sleeps
+ 15 w2 sleeps
+ 15 w0 wakes up and burns CPU
+ 20 w0 finishes
+ 20 w1 wakes up and finishes
+ 25 w2 wakes up and finishes
+
+
+6. Guidelines
+
+* Do not forget to use WQ_RESCUER if a wq may process work items which
+ are used during memory reclaim. Each wq with WQ_RESCUER set has one
+ rescuer thread reserved for it. If there is dependency among
+ multiple work items used during memory reclaim, they should be
+ queued to separate wq each with WQ_RESCUER.
+
+* Unless strict ordering is required, there is no need to use ST wq.
+
+* Unless there is a specific need, using 0 for @max_active is
+ recommended. In most use cases, concurrency level usually stays
+ well under the default limit.
+
+* A wq serves as a domain for forward progress guarantee (WQ_RESCUER),
+ flush and work item attributes. Work items which are not involved
+ in memory reclaim and don't need to be flushed as a part of a group
+ of work items, and don't require any special attribute, can use one
+ of the system wq. There is no difference in execution
+ characteristics between using a dedicated wq and a system wq.
+
+* Unless work items are expected to consume a huge amount of CPU
+ cycles, using a bound wq is usually beneficial due to the increased
+ level of locality in wq operations and work item execution.
diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt
index 29a6ff8bc7d..7fbbaf85f5b 100644
--- a/Documentation/x86/x86_64/boot-options.txt
+++ b/Documentation/x86/x86_64/boot-options.txt
@@ -166,19 +166,13 @@ NUMA
numa=noacpi Don't parse the SRAT table for NUMA setup
- numa=fake=CMDLINE
- If a number, fakes CMDLINE nodes and ignores NUMA setup of the
- actual machine. Otherwise, system memory is configured
- depending on the sizes and coefficients listed. For example:
- numa=fake=2*512,1024,4*256,*128
- gives two 512M nodes, a 1024M node, four 256M nodes, and the
- rest split into 128M chunks. If the last character of CMDLINE
- is a *, the remaining memory is divided up equally among its
- coefficient:
- numa=fake=2*512,2*
- gives two 512M nodes and the rest split into two nodes.
- Otherwise, the remaining system RAM is allocated to an
- additional node.
+ numa=fake=<size>[MG]
+ If given as a memory unit, fills all system RAM with nodes of
+ size interleaved over physical nodes.
+
+ numa=fake=<N>
+ If given as an integer, fills all system RAM with N fake nodes
+ interleaved over physical nodes.
ACPI
diff --git a/Documentation/x86/zero-page.txt b/Documentation/x86/zero-page.txt
index feb37e17701..cf5437deda8 100644
--- a/Documentation/x86/zero-page.txt
+++ b/Documentation/x86/zero-page.txt
@@ -18,6 +18,7 @@ Offset Proto Name Meaning
080/010 ALL hd0_info hd0 disk parameter, OBSOLETE!!
090/010 ALL hd1_info hd1 disk parameter, OBSOLETE!!
0A0/010 ALL sys_desc_table System description table (struct sys_desc_table)
+0B0/010 ALL olpc_ofw_header OLPC's OpenFirmware CIF and friends
140/080 ALL edid_info Video mode setup (struct edid_info)
1C0/020 ALL efi_info EFI 32 information (struct efi_info)
1E0/004 ALL alk_mem_k Alternative mem check, in KB
diff --git a/Documentation/zh_CN/HOWTO b/Documentation/zh_CN/HOWTO
index 3d80e8af36e..69160779e43 100644
--- a/Documentation/zh_CN/HOWTO
+++ b/Documentation/zh_CN/HOWTO
@@ -112,7 +112,7 @@ Linux内核代码中包含有大量的文档。这些文档对于学习如何与
其他关于如何正确地生成补丁的优秀文档包括:
"The Perfect Patch"
- http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+ http://userweb.kernel.org/~akpm/stuff/tpp.txt
"Linux kernel patch submission format"
http://linux.yyz.us/patch-format.html
@@ -168,7 +168,7 @@ Linux内核代码中包含有大量的文档。这些文档对于学习如何与
如果你想加入内核开发社区并协助完成一些任务,却找不到从哪里开始,可以访问
“Linux内核房管员”计划:
- http://janitor.kernelnewbies.org/
+ http://kernelnewbies.org/KernelJanitors
这是极佳的起点。它提供一个相对简单的任务列表,列出内核代码中需要被重新
整理或者改正的地方。通过和负责这个计划的开发者们一同工作,你会学到将补丁
集成进内核的基本原理。如果还没有决定下一步要做什么的话,你还可能会得到方
@@ -515,7 +515,7 @@ Linux内核社区并不喜欢一下接收大段的代码。修改需要被恰当
想了解它具体应该看起来像什么,请查阅以下文档中的“ChangeLog”章节:
“The Perfect Patch”
- http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+ http://userweb.kernel.org/~akpm/stuff/tpp.txt
这些事情有时候做起来很难。要在任何方面都做到完美可能需要好几年时间。这是
@@ -525,7 +525,7 @@ Linux内核社区并不喜欢一下接收大段的代码。修改需要被恰当
---------------
感谢Paolo Ciarrocchi允许“开发流程”部分基于他所写的文章
-(http://linux.tar.bz/articles/2.6-development_process),感谢Randy
+(http://www.kerneltravel.net/newbie/2.6-development_process),感谢Randy
Dunlap和Gerrit Huizenga完善了应该说和不该说的列表。感谢Pat Mochel, Hanna
Linder, Randy Dunlap, Kay Sievers, Vojtech Pavlik, Jan Kara, Josh Boyer,
Kees Cook, Andrew Morton, Andi Kleen, Vadim Lobanov, Jesper Juhl, Adrian
diff --git a/Documentation/zh_CN/SubmittingDrivers b/Documentation/zh_CN/SubmittingDrivers
index 5f4815c63ec..c27b0f6cdd3 100644
--- a/Documentation/zh_CN/SubmittingDrivers
+++ b/Documentation/zh_CN/SubmittingDrivers
@@ -165,4 +165,4 @@ Linux USB项目:
http://www.fenrus.org/how-to-not-write-a-device-driver-paper.pdf
内核清洁工 (Kernel Janitor):
- http://janitor.kernelnewbies.org/
+ http://kernelnewbies.org/KernelJanitors
diff --git a/Documentation/zh_CN/SubmittingPatches b/Documentation/zh_CN/SubmittingPatches
index 985c92e20b7..9a1a6e1ed09 100644
--- a/Documentation/zh_CN/SubmittingPatches
+++ b/Documentation/zh_CN/SubmittingPatches
@@ -83,7 +83,7 @@ Quilt:
http://savannah.nongnu.org/projects/quilt
Andrew Morton 的补丁脚本:
-http://www.zip.com.au/~akpm/linux/patches/
+http://userweb.kernel.org/~akpm/stuff/patch-scripts.tar.gz
作为这些脚本的替代,quilt 是值得推荐的补丁管理工具(看上面的链接)。
2)描述你的改动。
@@ -166,7 +166,7 @@ MAITAINERS 文件里的)发送一个手册页(man-pages)补丁,或者至
人拷贝,只要它是琐碎的)
任何文件的作者/维护者对该文件的改动(例如 patch monkey 在重传模式下)
-URL: <http://www.kernel.org/pub/linux/kernel/people/bunk/trivial/>
+EMAIL: trivial@kernel.org
(译注,关于“琐碎补丁”的一些说明:因为原文的这一部分写得比较简单,所以不得不
违例写一下译注。"trivial"这个英文单词的本意是“琐碎的,不重要的。”但是在这里
@@ -394,7 +394,7 @@ Static inline 函数相比宏来说,是好得多的选择。Static inline 函
----------------
Andrew Morton, "The perfect patch" (tpp).
- <http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt>
+ <http://userweb.kernel.org/~akpm/stuff/tpp.txt>
Jeff Garzik, "Linux kernel patch submission format".
<http://linux.yyz.us/patch-format.html>
diff --git a/Documentation/zh_CN/sparse.txt b/Documentation/zh_CN/sparse.txt
index 75992a603ae..cc144e58151 100644
--- a/Documentation/zh_CN/sparse.txt
+++ b/Documentation/zh_CN/sparse.txt
@@ -22,7 +22,7 @@ Documentation/sparse.txt 的中文翻译
---------------------------------------------------------------------
Copyright 2004 Linus Torvalds
-Copyright 2004 Pavel Machek <pavel@suse.cz>
+Copyright 2004 Pavel Machek <pavel@ucw.cz>
Copyright 2006 Bob Copeland <me@bobcopeland.com>
使用 sparse 工具做类型检查