Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 189 insertions, 0 deletions

diff --git a/arch/alpha/oprofile/common.c b/arch/alpha/oprofile/common.c
new file mode 100644
index 00000000000..908eb4af8de
--- /dev/null
+++ b/arch/alpha/oprofile/common.c
@@ -0,0 +1,189 @@
+/**
+ * @file arch/alpha/oprofile/common.c
+ *
+ * @remark Copyright 2002 OProfile authors
+ * @remark Read the file COPYING
+ *
+ * @author Richard Henderson <rth@twiddle.net>
+ */
+
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+
+#include "op_impl.h"
+
+extern struct op_axp_model op_model_ev4 __attribute__((weak));
+extern struct op_axp_model op_model_ev5 __attribute__((weak));
+extern struct op_axp_model op_model_pca56 __attribute__((weak));
+extern struct op_axp_model op_model_ev6 __attribute__((weak));
+extern struct op_axp_model op_model_ev67 __attribute__((weak));
+
+static struct op_axp_model *model;
+
+extern void (*perf_irq)(unsigned long, struct pt_regs *);
+static void (*save_perf_irq)(unsigned long, struct pt_regs *);
+
+static struct op_counter_config ctr[20];
+static struct op_system_config sys;
+static struct op_register_config reg;
+
+/* Called from do_entInt to handle the performance monitor interrupt.  */
+
+static void
+op_handle_interrupt(unsigned long which, struct pt_regs *regs)
+{
+	model->handle_interrupt(which, regs, ctr);
+
+	/* If the user has selected an interrupt frequency that is
+	   not exactly the width of the counter, write a new value
+	   into the counter such that it'll overflow after N more
+	   events.  */
+	if ((reg.need_reset >> which) & 1)
+		model->reset_ctr(&reg, which);
+}
+ 
+static int
+op_axp_setup(void)
+{
+	unsigned long i, e;
+
+	/* Install our interrupt handler into the existing hook.  */
+	save_perf_irq = perf_irq;
+	perf_irq = op_handle_interrupt;
+
+	/* Compute the mask of enabled counters.  */
+	for (i = e = 0; i < model->num_counters; ++i)
+		if (ctr[i].enabled)
+			e |= 1 << i;
+	reg.enable = e;
+
+	/* Pre-compute the values to stuff in the hardware registers.  */
+	model->reg_setup(&reg, ctr, &sys);
+
+	/* Configure the registers on all cpus.  */
+	smp_call_function(model->cpu_setup, &reg, 0, 1);
+	model->cpu_setup(&reg);
+	return 0;
+}
+
+static void
+op_axp_shutdown(void)
+{
+	/* Remove our interrupt handler.  We may be removing this module.  */
+	perf_irq = save_perf_irq;
+}
+
+static void
+op_axp_cpu_start(void *dummy)
+{
+	wrperfmon(1, reg.enable);
+}
+
+static int
+op_axp_start(void)
+{
+	smp_call_function(op_axp_cpu_start, NULL, 0, 1);
+	op_axp_cpu_start(NULL);
+	return 0;
+}
+
+static inline void
+op_axp_cpu_stop(void *dummy)
+{
+	/* Disable performance monitoring for all counters.  */
+	wrperfmon(0, -1);
+}
+
+static void
+op_axp_stop(void)
+{
+	smp_call_function(op_axp_cpu_stop, NULL, 0, 1);
+	op_axp_cpu_stop(NULL);
+}
+
+static int
+op_axp_create_files(struct super_block * sb, struct dentry * root)
+{
+	int i;
+
+	for (i = 0; i < model->num_counters; ++i) {
+		struct dentry *dir;
+		char buf[3];
+
+		snprintf(buf, sizeof buf, "%d", i);
+		dir = oprofilefs_mkdir(sb, root, buf);
+
+		oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
+                oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
+		oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
+		/* Dummies.  */
+		oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
+		oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
+		oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
+	}
+
+	if (model->can_set_proc_mode) {
+		oprofilefs_create_ulong(sb, root, "enable_pal",
+					&sys.enable_pal);
+		oprofilefs_create_ulong(sb, root, "enable_kernel",
+					&sys.enable_kernel);
+		oprofilefs_create_ulong(sb, root, "enable_user",
+					&sys.enable_user);
+	}
+
+	return 0;
+}
+
+int __init
+oprofile_arch_init(struct oprofile_operations *ops)
+{
+	struct op_axp_model *lmodel = NULL;
+
+	switch (implver()) {
+	case IMPLVER_EV4:
+		lmodel = &op_model_ev4;
+		break;
+	case IMPLVER_EV5:
+		/* 21164PC has a slightly different set of events.
+		   Recognize the chip by the presence of the MAX insns.  */
+		if (!amask(AMASK_MAX))
+			lmodel = &op_model_pca56;
+		else
+			lmodel = &op_model_ev5;
+		break;
+	case IMPLVER_EV6:
+		/* 21264A supports ProfileMe.
+		   Recognize the chip by the presence of the CIX insns.  */
+		if (!amask(AMASK_CIX))
+			lmodel = &op_model_ev67;
+		else
+			lmodel = &op_model_ev6;
+		break;
+	}
+
+	if (!lmodel)
+		return -ENODEV;
+	model = lmodel;
+
+	ops->create_files = op_axp_create_files;
+	ops->setup = op_axp_setup;
+	ops->shutdown = op_axp_shutdown;
+	ops->start = op_axp_start;
+	ops->stop = op_axp_stop;
+	ops->cpu_type = lmodel->cpu_type;
+
+	printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
+	       lmodel->cpu_type);
+
+	return 0;
+}
+
+
+void
+oprofile_arch_exit(void)
+{
+}