ARM: decompressor: avoid speculative prefetch from non-RAM areas

We setup identity MMU mappings across the entire 4GB of space, which
are permissionless because the domain is set to manager.

This unfortunately allows ARMv6 and later CPUs to speculatively
prefetch from the entire address space, which can cause undesirable
side effects if those regions contain devices.

As we setup the mappings with read/write permission, we can switch
the domain to client mode, and then use the XN bit for ARMv6 and
above to control speculative prefetch to non-RAM areas.

Reported-by: R Sricharan <r.sricharan@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 18 insertions, 11 deletions

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index dc7e8ce8e6b..5ad33a4df67 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -567,6 +567,12 @@ __armv3_mpu_cache_on:
 		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
 		mov	pc, lr
 
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+#define CB_BITS 0x08
+#else
+#define CB_BITS 0x0c
+#endif
+
 __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
 		bic	r3, r3, #0xff		@ Align the pointer
 		bic	r3, r3, #0x3f00
@@ -578,17 +584,14 @@ __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
 		mov	r9, r0, lsr #18
 		mov	r9, r9, lsl #18		@ start of RAM
 		add	r10, r9, #0x10000000	@ a reasonable RAM size
-		mov	r1, #0x12
-		orr	r1, r1, #3 << 10
+		mov	r1, #0x12		@ XN|U + section mapping
+		orr	r1, r1, #3 << 10	@ AP=11
 		add	r2, r3, #16384
 1:		cmp	r1, r9			@ if virt > start of RAM
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-		orrhs	r1, r1, #0x08		@ set cacheable
-#else
-		orrhs	r1, r1, #0x0c		@ set cacheable, bufferable
-#endif
-		cmp	r1, r10			@ if virt > end of RAM
-		bichs	r1, r1, #0x0c		@ clear cacheable, bufferable
+		cmphs	r10, r1			@   && end of RAM > virt
+		bic	r1, r1, #0x1c		@ clear XN|U + C + B
+		orrlo	r1, r1, #0x10		@ Set XN|U for non-RAM
+		orrhs	r1, r1, r6		@ set RAM section settings
 		str	r1, [r0], #4		@ 1:1 mapping
 		add	r1, r1, #1048576
 		teq	r0, r2
@@ -599,7 +602,7 @@ __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
  * so there is no map overlap problem for up to 1 MB compressed kernel.
  * If the execution is in RAM then we would only be duplicating the above.
  */
-		mov	r1, #0x1e
+		orr	r1, r6, #0x04		@ ensure B is set for this
 		orr	r1, r1, #3 << 10
 		mov	r2, pc
 		mov	r2, r2, lsr #20
@@ -620,6 +623,7 @@ __arm926ejs_mmu_cache_on:
 __armv4_mmu_cache_on:
 		mov	r12, lr
 #ifdef CONFIG_MMU
+		mov	r6, #CB_BITS | 0x12	@ U
 		bl	__setup_mmu
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
@@ -641,6 +645,7 @@ __armv7_mmu_cache_on:
 #ifdef CONFIG_MMU
 		mrc	p15, 0, r11, c0, c1, 4	@ read ID_MMFR0
 		tst	r11, #0xf		@ VMSA
+		movne	r6, #CB_BITS | 0x02	@ !XN
 		blne	__setup_mmu
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
@@ -655,7 +660,7 @@ __armv7_mmu_cache_on:
 		orr	r0, r0, #1 << 25	@ big-endian page tables
 #endif
 		orrne	r0, r0, #1		@ MMU enabled
-		movne	r1, #-1
+		movne	r1, #0xfffffffd		@ domain 0 = client
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
 #endif
@@ -668,6 +673,7 @@ __armv7_mmu_cache_on:
 
 __fa526_cache_on:
 		mov	r12, lr
+		mov	r6, #CB_BITS | 0x12	@ U
 		bl	__setup_mmu
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c7, 0	@ Invalidate whole cache
@@ -682,6 +688,7 @@ __fa526_cache_on:
 
 __arm6_mmu_cache_on:
 		mov	r12, lr
+		mov	r6, #CB_BITS | 0x12	@ U
 		bl	__setup_mmu
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3