ARM: dts: mvebu: introduce internal-regs node

Introduce a 'internal-regs' subnode, under which all devices are
moved. This is not really needed for now, but will be for the
mvebu-mbus driver. This generates a lot of code movement since it's
indenting by one more tab all the devices.  So it was a good
opportunity to fix all the bad indentation.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

1 files changed, 49 insertions, 47 deletions

diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index 83d5c041975..130f8390a7e 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -28,60 +28,62 @@
 	};
 
 	soc {
-		serial@12000 {
-			clock-frequency = <200000000>;
-			status = "okay";
-		};
-		sata@a0000 {
-			nr-ports = <2>;
-			status = "okay";
-		};
-
-		mdio {
-			phy0: ethernet-phy@0 {
-				reg = <0>;
+		internal-regs {
+			serial@12000 {
+				clock-frequency = <200000000>;
+				status = "okay";
 			};
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
 
-			phy1: ethernet-phy@1 {
-				reg = <1>;
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
 			};
-		};
 
-		ethernet@70000 {
-			status = "okay";
-			phy = <&phy0>;
-			phy-mode = "sgmii";
-		};
-		ethernet@74000 {
-			status = "okay";
-			phy = <&phy1>;
-			phy-mode = "rgmii-id";
-		};
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "sgmii";
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
 
-		mvsdio@d4000 {
-			pinctrl-0 = <&sdio_pins1>;
-			pinctrl-names = "default";
-			status = "okay";
-			/* No CD or WP GPIOs */
-		};
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins1>;
+				pinctrl-names = "default";
+				status = "okay";
+				/* No CD or WP GPIOs */
+			};
 
-		usb@50000 {
-			status = "okay";
-		};
+			usb@50000 {
+				status = "okay";
+			};
 
-		usb@51000 {
-			status = "okay";
-		};
-	};
+			usb@51000 {
+				status = "okay";
+			};
 
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		button@1 {
-			label = "Software Button";
-			linux,code = <116>;
-			gpios = <&gpio0 6 1>;
+			gpio-keys {
+				compatible = "gpio-keys";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				button@1 {
+					label = "Software Button";
+					linux,code = <116>;
+					gpios = <&gpio0 6 1>;
+				};
+			};
 		};
 	};
-};
+ };