Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dt

From Nicolas Ferre:

Big DT-centric update for AT91:
- Calao boards update, removal of one board C file and
  associated defconfig, Kconfig Makefile lines
- several Acme boards updates
- addition of watchdog, uart and pinctrl descriptions for
  several products
- modification of RTC compatible string for 9x5 family

* tag 'at91-dt' of git://github.com/at91linux/linux-at91: (21 commits)
  ARM: at91/dt: add pinctrl definition for at91 tc blocks
  ARM: at91/dts: add the watchdog nodes for at91 boards
  ARM: at91/dtsi: add the watchdog nodes for at91 SoC
  ARM: at91: drop non DT: Calao USB-A96x
  ARM: at91: dt: add Calao USB-A9G20 low power version
  ARM: at91: dt: usb-a9263: add dataflash support
  ARM: at91: dt: usb-a9263: update shutdown controller
  ARM: at91: dt: usb-a9260: update shutdown controller
  ARM: at91: dt: sam9260: add i2c gpio pinctrl
  ARM: at91: switch Fox G20 board .dts to pre-processor defines
  ARM: at91: add Acme Systems Fox G20 board
  ARM: at91/at91-ariag25.dts: UART0/1 nodes are disabled
  ARM: at91/at91sam9x5.dtsi: add UART0/1 nodes
  ARM: at91/at91-ariag25.dts: add RTC node
  ARM: at91: at91sam9x5 RTC is not compatible with at91rm9200 one
  ARM: at91: udpate defconfigs
  ARM: at91: dt: switch to standard IRQ flag defines
  ARM: at91: dt: switch to pinctrl to pre-processor
  ARM: at91: dt: add pinctrl pre-processor define
  ARM: at91: dt: switch to standard GPIO flag defines.
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 16 insertions, 12 deletions

diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index 3b82d91e7fc..70f835b55c0 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -6,7 +6,7 @@
  * Licensed under GPLv2 only
  */
 /dts-v1/;
-/include/ "at91sam9263.dtsi"
+#include "at91sam9263.dtsi"
 
 / {
 	model = "Atmel at91sam9263ek";
@@ -51,7 +51,7 @@
 			};
 
 			usb1: gadget@fff78000 {
-				atmel,vbus-gpio = <&pioA 25 0>;
+				atmel,vbus-gpio = <&pioA 25 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
 
@@ -65,8 +65,8 @@
 				slot@0 {
 					reg = <0>;
 					bus-width = <4>;
-					cd-gpios = <&pioE 18 0>;
-					wp-gpios = <&pioE 19 0>;
+					cd-gpios = <&pioE 18 GPIO_ACTIVE_HIGH>;
+					wp-gpios = <&pioE 19 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -74,8 +74,8 @@
 				mmc0 {
 					pinctrl_board_mmc0: mmc0-board {
 						atmel,pins =
-							<5 18 0x0 0x5	/* PE18 gpio CD pin pull up and deglitch */
-							 5 19 0x0 0x1>;	/* PE19 gpio WP pin pull up */
+							<AT91_PIOE 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH 	/* PE18 gpio CD pin pull up and deglitch */
+							 AT91_PIOE 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PE19 gpio WP pin pull up */
 					};
 				};
 			};
@@ -89,6 +89,10 @@
 					reg = <0>;
 				};
 			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
 		};
 
 		nand0: nand@40000000 {
@@ -141,8 +145,8 @@
 		usb0: ohci@00a00000 {
 			num-ports = <2>;
 			status = "okay";
-			atmel,vbus-gpio = <&pioA 24 0
-					   &pioA 21 0
+			atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH
+					   &pioA 21 GPIO_ACTIVE_HIGH
 					  >;
 		};
 	};
@@ -152,13 +156,13 @@
 
 		d3 {
 			label = "d3";
-			gpios = <&pioB 7 0>;
+			gpios = <&pioB 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		d2 {
 			label = "d2";
-			gpios = <&pioC 29 1>;
+			gpios = <&pioC 29 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "nand-disk";
 		};
 	};
@@ -168,14 +172,14 @@
 
 		left_click {
 			label = "left_click";
-			gpios = <&pioC 5 1>;
+			gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
 			gpio-key,wakeup;
 		};
 
 		right_click {
 			label = "right_click";
-			gpios = <&pioC 4 1>;
+			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
 			gpio-key,wakeup;
 		};