summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx28-cfa10036.dts
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2013-06-20 02:06:36 +0200
committerArnd Bergmann <arnd@arndb.de>2013-06-20 02:06:36 +0200
commitd5a51af940efec07c969bdb5fe478bb518116404 (patch)
tree26291e51122081d929e3cac3d441ee5efbfa75d6 /arch/arm/boot/dts/imx28-cfa10036.dts
parenta44bde66bec168889c95bd1d0d15834b02387901 (diff)
parentd75f3d92e86e65b3cb9725e65f7278cc303511db (diff)
Merge tag 'mxs-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt
From Shawn Guo: mxs device tree changes for 3.11: * A couple of new board support, cfa10055 and cfa10057 * A few updates on cfa10036 device tree source * Some auart pinctrl data addition * Adopt soc bus infrastructure for mach-mxs * tag 'mxs-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: dt: Add Crystalfontz CFA-10057 device tree ARM: mxs: dt: Add the Crystalfontz CFA-10055 device tree ARM: cfa10049: Switch the chip select pin of the LCD controller ARM: cfa10036: Add USB0 OTG port ARM: dts: apf28dev: Add touchscreen support for APF28dev ARM: mxs: Fix UARTs on M28EVK ARM: cfa10036: dt: Change i2c0 clock frequency ARM: dts: cfa10036: Change the OLED display to SSD1306 ARM: mx28: add auart4 2 pins pinmux to imx28.dtsi ARM: mx28: add auart3 2 pins pinmux to imx28.dtsi ARM: mx28: add auart2 2 pins pinmux to imx28.dtsi ARM: mxs: Use soc bus infrastructure ARM: dts: mx28: Adjust the digctl compatible string ARM: mxs: Remove init_irq declaration in machine description Includes an update to 3.10-rc6 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch/arm/boot/dts/imx28-cfa10036.dts')
-rw-r--r--arch/arm/boot/dts/imx28-cfa10036.dts38
1 files changed, 29 insertions, 9 deletions
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index 1594694532b..94c4476972c 100644
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -45,6 +45,17 @@
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
+
+ usb0_otg_cfa10036: otg-10036@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0142 /* MX28_PAD_GPMI_READY0__USB0_ID */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
};
ssp0: ssp@80010000 {
@@ -58,12 +69,6 @@
};
apbx@80040000 {
- pwm: pwm@80064000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm4_pins_a>;
- status = "okay";
- };
-
duart: serial@80074000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_b>;
@@ -73,15 +78,30 @@
i2c0: i2c@80058000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_b>;
+ clock-frequency = <400000>;
status = "okay";
- ssd1307: oled@3c {
- compatible = "solomon,ssd1307fb-i2c";
+ ssd1306: oled@3c {
+ compatible = "solomon,ssd1306fb-i2c";
reg = <0x3c>;
- pwms = <&pwm 4 3000>;
reset-gpios = <&gpio2 7 0>;
+ solomon,height = <32>;
+ solomon,width = <128>;
+ solomon,page-offset = <0>;
};
};
+
+ usbphy0: usbphy@8007c000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ usb0: usb@80080000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_otg_cfa10036>;
+ status = "okay";
};
};