ARM: dts: imx53: make pinctrl nodes board specific

Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that
boards that share the same pinctrl setting do not have to define it time
and time again in <board>.dts.  However, along with the devices and use
cases being added continuously, the pinctrl setting nodes under iomuxc
becomes more than expected.  This bloats device tree blob for particular
board unnecessarily since only a small subset of those pinctrl setting
nodes will be used by the board.  It impacts not only the DTB file size
but also the run-time device tree lookup efficiency.

The patch moves all the pinctrl data into individual boards as needed.
With the changes, the pinctrl setting nodes becomes local to particular
board, and it makes no sense to continue numbering the setting for
given peripheral.  Thus, all the pinctrl phandler name gets updated to
have only peripheral name in there.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

1 files changed, 136 insertions, 34 deletions

diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index abd72af545b..718dd158fa7 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -35,8 +35,8 @@
 
 &esdhc2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2_1>,
-		    <&pinctrl_tqma53_esdhc2_2>;
+	pinctrl-0 = <&pinctrl_esdhc2>,
+		    <&pinctrl_esdhc2_cdwp>;
 	vmmc-supply = <&reg_3p3v>;
 	wp-gpios = <&gpio1 2 0>;
 	cd-gpios = <&gpio1 4 0>;
@@ -45,13 +45,13 @@
 
 &uart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3_2>;
+	pinctrl-0 = <&pinctrl_uart3>;
 	status = "disabled";
 };
 
 &ecspi1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1_1>;
+	pinctrl-0 = <&pinctrl_ecspi1>;
 	fsl,spi-num-chipselects = <4>;
 	cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>,
 		   <&gpio3 24 0>, <&gpio3 25 0>;
@@ -60,7 +60,7 @@
 
 &esdhc3 { /* EMMC */
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc3_1>;
+	pinctrl-0 = <&pinctrl_esdhc3>;
 	vmmc-supply = <&reg_3p3v>;
 	non-removable;
 	bus-width = <8>;
@@ -71,27 +71,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
-	esdhc2_2 {
-		pinctrl_tqma53_esdhc2_2: esdhc2-tqma53-grp2 {
-			fsl,pins = <
-				MX53_PAD_GPIO_4__GPIO1_4	0x80000000 /* SD2_CD */
-				MX53_PAD_GPIO_2__GPIO1_2	0x80000000 /* SD2_WP */
-			>;
-		};
-	};
-
-	i2s {
-		pinctrl_i2s_1: i2s-grp1 {
-			fsl,pins = <
-				 MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC  0x80000000 /* I2S_SCLK */
-				 MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD  0x80000000 /* I2S_DOUT */
-				 MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 /* I2S_LRCLK */
-				 MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD  0x80000000 /* I2S_DIN */
-			>;
-		};
-	};
-
-	hog {
+	imx53-tqma53 {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
 				 MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 /* SSI_MCLK */
@@ -107,43 +87,165 @@
 				 MX53_PAD_GPIO_1__PWM2_PWMO	 0x80000000 /* LCD_CONTRAST */
 			>;
 		};
+
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
+				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
+				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
+				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL2__CAN1_TXCAN		0x80000000
+				MX53_PAD_KEY_ROW2__CAN1_RXCAN		0x80000000
+			>;
+		};
+
+		pinctrl_can2: can2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
+				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
+			>;
+		};
+
+		pinctrl_cspi: cspigrp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__CSPI_MISO		0x1d5
+				MX53_PAD_SD1_CMD__CSPI_MOSI		0x1d5
+				MX53_PAD_SD1_CLK__CSPI_SCLK		0x1d5
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
+				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
+				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
+			>;
+		};
+
+		pinctrl_esdhc2: esdhc2grp {
+			fsl,pins = <
+				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+			>;
+		};
+
+		pinctrl_esdhc2_cdwp: esdhc2cdwp {
+			fsl,pins = <
+				MX53_PAD_GPIO_4__GPIO1_4	0x80000000 /* SD2_CD */
+				MX53_PAD_GPIO_2__GPIO1_2	0x80000000 /* SD2_WP */
+			>;
+		};
+
+		pinctrl_esdhc3: esdhc3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
+				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
+				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
+				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
+				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
+				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
+				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
+				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
+				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
+				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
+				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
+				MX53_PAD_GPIO_5__I2C3_SCL		0xc0000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+			>;
+		};
 	};
 };
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_2>;
+	pinctrl-0 = <&pinctrl_uart1>;
 	fsl,uart-has-rtscts;
 	status = "disabled";
 };
 
 &uart2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_1>;
+	pinctrl-0 = <&pinctrl_uart2>;
 	status = "disabled";
 };
 
 &can1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1_2>;
+	pinctrl-0 = <&pinctrl_can1>;
 	status = "disabled";
 };
 
 &can2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2_1>;
+	pinctrl-0 = <&pinctrl_can2>;
 	status = "disabled";
 };
 
 &i2c3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3_1>;
+	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "disabled";
 };
 
 &cspi {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi_1>;
+	pinctrl-0 = <&pinctrl_cspi>;
 	fsl,spi-num-chipselects = <3>;
 	cs-gpios = <&gpio1 18 0>, <&gpio1 19 0>,
 		   <&gpio1 21 0>;
@@ -152,7 +254,7 @@
 
 &i2c2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2_1>;
+	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
 	pmic: mc34708@8 {
@@ -177,7 +279,7 @@
 
 &fec {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec_1>;
+	pinctrl-0 = <&pinctrl_fec>;
 	phy-mode = "rmii";
 	status = "disabled";
 };