Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "A large part of the arm-soc patches are nowadays DT changes, adding
  support for new SoCs, boards and devices without changing kernel
  source.  The plan is still to move the devicetree files out of the
  kernel tree and reduce the amount of churn going on here, but we keep
  finding reasons to delay doing that.

  Changes are really all over the place, with little sticking out
  particularly.  We have contributions from a total of 116 people in
  this branch.

  Unfortunately, the size of this branch also causes a significant
  number of conflicts at the moment, typically when subsystem
  maintainers merge patches that change the driver at the same time as
  the dts files.  In most cases this could be avoided because the dts
  changes are supposed to be compatible in both ways, and we are asking
  everyone to send ARM dts changes through our tree only"

* tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits)
  dts: stmmac: Document the clocks property in the stmmac base document
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  ARM: STi: stih41x: Add support for the FSM Serial Flash Controller
  ARM: STi: stih416: Add support for the FSM Serial Flash Controller
  ARM: tegra: fix Dalmore pinctrl configuration
  ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm
  ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND
  ARM: dts: Build all keystone dt blobs
  ARM: dts: keystone: Fix control register range for clktsip
  ARM: dts: keystone: Fix domain register range for clkfftc1
  ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot
  ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
  ARM: dts: bcm21664: Add device tree files.
  ARM: DT: bcm21664: Device tree bindings
  ARM: efm32: properly namespace i2c location property
  ARM: efm32: fix unit address part in USART2 device nodes' names
  ARM: mvebu: Enable NAND controller in Armada 385-DB
  ARM: mvebu: Add support for NAND controller in Armada 38x SoC
  ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs
  ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs
  ...

1 files changed, 366 insertions, 12 deletions

diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index ff6f1e8f2dd..009abd69385 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -10,17 +10,46 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	memory {
 		reg = <0x10000000 0x80000000>;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		user {
+			label = "debug";
+			gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif",
+			   "fsl,imx-sabreauto-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		status = "okay";
+	};
 };
 
 &ecspi1 {
 	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio3 19 0>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1_1 &pinctrl_ecspi1_sabreauto>;
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
 	status = "disabled"; /* pin conflict with WEIM NOR */
 
 	flash: m25p80@0 {
@@ -34,22 +63,130 @@
 
 &fec {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_2>;
+	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	status = "okay";
 };
 
 &gpmi {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand_1>;
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
-	hog {
+	imx6qdl-sabreauto {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
 				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
@@ -57,28 +194,245 @@
 				MX6QDL_PAD_GPIO_18__SD3_VSELECT 0x17059
 			>;
 		};
-	};
 
-	ecspi1 {
-		pinctrl_ecspi1_sabreauto: ecspi1-sabreauto {
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			>;
+		};
+
+		pinctrl_ecspi1_cs: ecspi1cs {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
 			>;
 		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x80000000
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB2__I2C2_SCL	0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_spdif: spdifgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
+			>;
+		};
+
+		pinctrl_weim_cs0: weimcs0grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
+			>;
+		};
+
+		pinctrl_weim_nor: weimnorgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
+				MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
+				MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B		0xb060
+				MX6QDL_PAD_EIM_D16__EIM_DATA16		0x1b0b0
+				MX6QDL_PAD_EIM_D17__EIM_DATA17		0x1b0b0
+				MX6QDL_PAD_EIM_D18__EIM_DATA18		0x1b0b0
+				MX6QDL_PAD_EIM_D19__EIM_DATA19		0x1b0b0
+				MX6QDL_PAD_EIM_D20__EIM_DATA20		0x1b0b0
+				MX6QDL_PAD_EIM_D21__EIM_DATA21		0x1b0b0
+				MX6QDL_PAD_EIM_D22__EIM_DATA22		0x1b0b0
+				MX6QDL_PAD_EIM_D23__EIM_DATA23		0x1b0b0
+				MX6QDL_PAD_EIM_D24__EIM_DATA24		0x1b0b0
+				MX6QDL_PAD_EIM_D25__EIM_DATA25		0x1b0b0
+				MX6QDL_PAD_EIM_D26__EIM_DATA26		0x1b0b0
+				MX6QDL_PAD_EIM_D27__EIM_DATA27		0x1b0b0
+				MX6QDL_PAD_EIM_D28__EIM_DATA28		0x1b0b0
+				MX6QDL_PAD_EIM_D29__EIM_DATA29		0x1b0b0
+				MX6QDL_PAD_EIM_D30__EIM_DATA30		0x1b0b0
+				MX6QDL_PAD_EIM_D31__EIM_DATA31		0x1b0b0
+				MX6QDL_PAD_EIM_A23__EIM_ADDR23		0xb0b1
+				MX6QDL_PAD_EIM_A22__EIM_ADDR22		0xb0b1
+				MX6QDL_PAD_EIM_A21__EIM_ADDR21		0xb0b1
+				MX6QDL_PAD_EIM_A20__EIM_ADDR20		0xb0b1
+				MX6QDL_PAD_EIM_A19__EIM_ADDR19		0xb0b1
+				MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0b1
+				MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0b1
+				MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0b1
+				MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
+				MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
+				MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
+				MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
+				MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
+				MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
+				MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
+				MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
+				MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
+				MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
+				MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
+				MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
+				MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
+				MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
+				MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
+				MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
 	};
 };
 
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
 &uart4 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4_1>;
+	pinctrl-0 = <&pinctrl_uart4>;
 	status = "okay";
 };
 
 &usdhc3 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3_1>;
-	pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	cd-gpios = <&gpio6 15 0>;
 	wp-gpios = <&gpio1 13 0>;
 	status = "okay";
@@ -86,7 +440,7 @@
 
 &weim {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_weim_nor_1 &pinctrl_weim_cs0_1>;
+	pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
 	#address-cells = <2>;
 	#size-cells = <1>;
 	ranges = <0 0 0x08000000 0x08000000>;