Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "A large part of the arm-soc patches are nowadays DT changes, adding
  support for new SoCs, boards and devices without changing kernel
  source.  The plan is still to move the devicetree files out of the
  kernel tree and reduce the amount of churn going on here, but we keep
  finding reasons to delay doing that.

  Changes are really all over the place, with little sticking out
  particularly.  We have contributions from a total of 116 people in
  this branch.

  Unfortunately, the size of this branch also causes a significant
  number of conflicts at the moment, typically when subsystem
  maintainers merge patches that change the driver at the same time as
  the dts files.  In most cases this could be avoided because the dts
  changes are supposed to be compatible in both ways, and we are asking
  everyone to send ARM dts changes through our tree only"

* tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits)
  dts: stmmac: Document the clocks property in the stmmac base document
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  ARM: STi: stih41x: Add support for the FSM Serial Flash Controller
  ARM: STi: stih416: Add support for the FSM Serial Flash Controller
  ARM: tegra: fix Dalmore pinctrl configuration
  ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm
  ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND
  ARM: dts: Build all keystone dt blobs
  ARM: dts: keystone: Fix control register range for clktsip
  ARM: dts: keystone: Fix domain register range for clkfftc1
  ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot
  ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
  ARM: dts: bcm21664: Add device tree files.
  ARM: DT: bcm21664: Device tree bindings
  ARM: efm32: properly namespace i2c location property
  ARM: efm32: fix unit address part in USART2 device nodes' names
  ARM: mvebu: Enable NAND controller in Armada 385-DB
  ARM: mvebu: Add support for NAND controller in Armada 38x SoC
  ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs
  ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs
  ...

1 files changed, 411 insertions, 16 deletions

diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index cc68e19c516..864d8dfb51c 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -8,6 +8,8 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include "imx6sl.dtsi"
 
 / {
@@ -18,11 +20,26 @@
 		reg = <0x80000000 0x40000000>;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		user {
+			label = "debug";
+			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_usb_otg1_vbus: usb_otg1_vbus {
+		reg_usb_otg1_vbus: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "usb_otg1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -30,22 +47,63 @@
 			enable-active-high;
 		};
 
-		reg_usb_otg2_vbus: usb_otg2_vbus {
+		reg_usb_otg2_vbus: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			regulator-name = "usb_otg2_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio4 2 0>;
 			enable-active-high;
 		};
+
+		reg_aud3v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "wm8962-supply-3v15";
+			regulator-min-microvolt = <3150000>;
+			regulator-max-microvolt = <3150000>;
+			regulator-boot-on;
+		};
+
+		reg_aud4v: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "wm8962-supply-4v2";
+			regulator-min-microvolt = <4325000>;
+			regulator-max-microvolt = <4325000>;
+			regulator-boot-on;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6sl-evk-wm8962", "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
 	};
 };
 
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux3>;
+	status = "okay";
+};
+
 &ecspi1 {
 	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 11 0>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1_1>;
+	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
 	flash: m25p80@0 {
@@ -59,16 +117,144 @@
 
 &fec {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec_1>;
+	pinctrl-0 = <&pinctrl_fec>;
 	phy-mode = "rmii";
 	status = "okay";
 };
 
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze100@08 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6SL_CLK_EXTERN_AUDIO>;
+		DCVDD-supply = <&vgen3_reg>;
+		DBVDD-supply = <&reg_aud3v>;
+		AVDD-supply = <&vgen3_reg>;
+		CPVDD-supply = <&vgen3_reg>;
+		MICVDD-supply = <&reg_aud3v>;
+		PLLVDD-supply = <&vgen3_reg>;
+		SPKVDD1-supply = <&reg_aud4v>;
+		SPKVDD2-supply = <&reg_aud4v>;
+	};
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
 
-	hog {
+	imx6sl-evk {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
 				MX6SL_PAD_KEY_ROW7__GPIO4_IO07    0x17059
@@ -78,21 +264,230 @@
 				MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
 				MX6SL_PAD_KEY_COL4__GPIO4_IO00	0x80000000
 				MX6SL_PAD_KEY_COL5__GPIO4_IO02	0x80000000
+				MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x4130b0
+			>;
+		};
+
+		pinctrl_audmux3: audmux3grp {
+			fsl,pins = <
+				MX6SL_PAD_AUD_RXD__AUD3_RXD	  0x4130b0
+				MX6SL_PAD_AUD_TXC__AUD3_TXC	  0x4130b0
+				MX6SL_PAD_AUD_TXD__AUD3_TXD	  0x4110b0
+				MX6SL_PAD_AUD_TXFS__AUD3_TXFS	  0x4130b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO	0x100b1
+				MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x100b1
+				MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x100b1
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX6SL_PAD_FEC_MDC__FEC_MDC		0x1b0b0
+				MX6SL_PAD_FEC_MDIO__FEC_MDIO		0x1b0b0
+				MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV		0x1b0b0
+				MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0	0x1b0b0
+				MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1	0x1b0b0
+				MX6SL_PAD_FEC_TX_EN__FEC_TX_EN		0x1b0b0
+				MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0	0x1b0b0
+				MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1	0x1b0b0
+				MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT	0x4001b0a8
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6SL_PAD_I2C1_SCL__I2C1_SCL	0x4001b8b1
+				MX6SL_PAD_I2C1_SDA__I2C1_SDA	0x4001b8b1
+			>;
+		};
+
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6SL_PAD_I2C2_SCL__I2C2_SCL	0x4001b8b1
+				MX6SL_PAD_I2C2_SDA__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_led: ledgrp {
+			fsl,pins = <
+				MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059
+			>;
+		};
+
+		pinctrl_kpp: kppgrp {
+			fsl,pins = <
+				MX6SL_PAD_KEY_ROW0__KEY_ROW0    0x1b010
+				MX6SL_PAD_KEY_ROW1__KEY_ROW1    0x1b010
+				MX6SL_PAD_KEY_ROW2__KEY_ROW2    0x1b0b0
+				MX6SL_PAD_KEY_COL0__KEY_COL0    0x110b0
+				MX6SL_PAD_KEY_COL1__KEY_COL1    0x110b0
+				MX6SL_PAD_KEY_COL2__KEY_COL2    0x110b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6SL_PAD_UART1_RXD__UART1_RX_DATA	0x1b0b1
+				MX6SL_PAD_UART1_TXD__UART1_TX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg1: usbotg1grp {
+			fsl,pins = <
+				MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID	0x17059
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6SL_PAD_SD1_CMD__SD1_CMD		0x17059
+				MX6SL_PAD_SD1_CLK__SD1_CLK		0x10059
+				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x17059
+				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x17059
+				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x17059
+				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD1_CMD__SD1_CMD		0x170b9
+				MX6SL_PAD_SD1_CLK__SD1_CLK		0x100b9
+				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170b9
+				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170b9
+				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170b9
+				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170b9
+				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170b9
+				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170b9
+				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170b9
+				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD1_CMD__SD1_CMD		0x170f9
+				MX6SL_PAD_SD1_CLK__SD1_CLK		0x100f9
+				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
+				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
+				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
+				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
+				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170f9
+				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170f9
+				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170f9
+				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170f9
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x100b9
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
+				MX6SL_PAD_SD2_CLK__SD2_CLK		0x100f9
+				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x170b9
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x100b9
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6SL_PAD_SD3_CMD__SD3_CMD		0x170f9
+				MX6SL_PAD_SD3_CLK__SD3_CLK		0x100f9
+				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
 			>;
 		};
 	};
 };
 
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	linux,keymap = <
+			MATRIX_KEY(0x0, 0x0, KEY_UP)         /* ROW0, COL0 */
+			MATRIX_KEY(0x0, 0x1, KEY_DOWN)       /* ROW0, COL1 */
+			MATRIX_KEY(0x0, 0x2, KEY_ENTER)      /* ROW0, COL2 */
+			MATRIX_KEY(0x1, 0x0, KEY_HOME)       /* ROW1, COL0 */
+			MATRIX_KEY(0x1, 0x1, KEY_RIGHT)      /* ROW1, COL1 */
+			MATRIX_KEY(0x1, 0x2, KEY_LEFT)       /* ROW1, COL2 */
+			MATRIX_KEY(0x2, 0x0, KEY_VOLUMEDOWN) /* ROW2, COL0 */
+			MATRIX_KEY(0x2, 0x1, KEY_VOLUMEUP)   /* ROW2, COL1 */
+	>;
+	status = "okay";
+};
+
+&ssi2 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_1>;
+	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
 &usbotg1 {
 	vbus-supply = <&reg_usb_otg1_vbus>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg1_1>;
+	pinctrl-0 = <&pinctrl_usbotg1>;
 	disable-over-current;
 	status = "okay";
 };
@@ -106,9 +501,9 @@
 
 &usdhc1 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1_1>;
-	pinctrl-1 = <&pinctrl_usdhc1_1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_1_200mhz>;
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 	bus-width = <8>;
 	cd-gpios = <&gpio4 7 0>;
 	wp-gpios = <&gpio4 6 0>;
@@ -117,9 +512,9 @@
 
 &usdhc2 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2_1>;
-	pinctrl-1 = <&pinctrl_usdhc2_1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc2_1_200mhz>;
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
 	cd-gpios = <&gpio5 0 0>;
 	wp-gpios = <&gpio4 29 0>;
 	status = "okay";
@@ -127,9 +522,9 @@
 
 &usdhc3 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3_1>;
-	pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	cd-gpios = <&gpio3 22 0>;
 	status = "okay";
 };