diff options
author | Linus Walleij <linus.walleij@linaro.org> | 2013-11-14 10:27:40 +0100 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2013-11-26 21:01:55 +0100 |
commit | 38656820aa31e853c7bfbe2658cc8a78e303583b (patch) | |
tree | 6950287124439587b5305e7d78ebecf27b8fb3e2 /arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi | |
parent | a12f703c5a27e2061fd0ea77200e5e2f8cfee54b (diff) |
ARM: ux500: move SPI pin config to device tree
This moves the SPI pin control table out of the board file
and into the device tree. Move the specific setting for
SSP0 on the HREFprev60 into the prev60-specific DTS file.
The SPI2 configuration is not really connected to any device,
as it will conflict with GPIO218 which is used on all HREFs.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi')
-rw-r--r-- | arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi | 31 |
1 files changed, 31 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi index 9f3e87573f8..456a25fbfae 100644 --- a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi @@ -41,6 +41,23 @@ ste,output = <OUTPUT_LOW>; }; + gpio_out_hi: gpio_output_high { + ste,gpio = <GPIOMODE_ENABLED>; + ste,output = <OUTPUT_HIGH>; + }; + + slpm_pdis: slpm_pdis { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; + }; + + slpm_wkup_pdis: slpm_wkup_pdis { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; + }; + slpm_wkup_pdis_en: slpm_wkup_pdis_en { ste,sleep = <SLPM_ENABLED>; ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; @@ -53,6 +70,13 @@ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; }; + slpm_in_pdis: slpm_in_pdis { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-input = <SLPM_DIR_INPUT>; + ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; + }; + slpm_in_wkup_pdis: slpm_in_wkup_pdis { ste,sleep = <SLPM_ENABLED>; ste,sleep-input = <SLPM_DIR_INPUT>; @@ -86,6 +110,13 @@ ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; }; + slpm_out_lo_pdis: slpm_out_lo_pdis { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-output = <SLPM_OUTPUT_LOW>; + ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; + }; + slpm_out_lo_wkup_pdis: slpm_out_lo_wkup_pdis { ste,sleep = <SLPM_ENABLED>; ste,sleep-output = <SLPM_OUTPUT_LOW>; |