diff options
| author | Felipe Balbi <balbi@ti.com> | 2014-12-04 09:10:21 -0600 |
|---|---|---|
| committer | Tony Lindgren <tony@atomide.com> | 2014-12-10 08:29:09 -0800 |
| commit | 58230c2c443bc9801293f6535144d04ceaf731e0 (patch) | |
| tree | 679ec595fe4b0098ea722965908cf93dc1977b93 /arch/arm/boot/dts | |
| parent | 01824a57673d2e4bfb27bf5b8f88563717b5edf0 (diff) | |
ARM: dts: am437x-sk: fix lcd enable pin mux data
Caused by a copy & paste error. Note that even with
this bug AM437x SK display still works because GPIO
mux mode is always enabled. It's still wrong to mux
somebody else's pin.
Luckily ball D25 (offset 0x238 - gpio5_8) on AM437x
isn't used for anything.
While at that, also replace a pullup with a pulldown
as that gpio should be normally low, not high.
Cc: <stable@vger.kernel.org> # v3.17+
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/boot/dts')
| -rw-r--r-- | arch/arm/boot/dts/am437x-sk-evm.dts | 3 |
1 files changed, 1 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 87aa4f3b8b3..0efd3ecc59b 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -320,8 +320,7 @@ lcd_pins: lcd_pins { pinctrl-single,pins = < - /* GPIO 5_8 to select LCD / HDMI */ - 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) + 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */ >; }; }; |