Merge tag 's5pv210-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc

Merge "Samsung S5PV210 DT support for v3.17" from Kukjin Kim:

- support common clock framework for s5pv210 clock
- add generic PHY driver on s5pv210 to support it via DT
- add dt support for s5pv210-goni, smdkc110, smdkv210 and torbreck boards
- remove board files from mach-s5pv210 and unused codes
- enable multiplatform for s5pv210

* tag 's5pv210-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  clk: samsung: s5pv210: Remove legacy board support
  ARM: SAMSUNG: Remove remaining legacy code
  gpio: samsung: Remove legacy support of S5PV210
  ARM: S5PV210: Enable multi-platform build support
  cpufreq: s5pv210: Make the driver multiplatform aware
  ARM: S5PV210: Register cpufreq platform device
  ARM: S5PV210: move debug-macro.S into the common space
  ARM: S5PV210: Untie PM support from legacy code
  ARM: S5PV210: Remove support for board files
  ARM: dts: Add Device tree for s5pc110/s5pv210 boards
  ARM: dts: Add Device tree for s5pv210 SoC
  ARM: S5PV210: Add board file for boot using Device Tree
  phy: Add support for S5PV210 to the Exynos USB 2.0 PHY driver
  clk: samsung: Add S5PV210 Audio Subsystem clock driver
  ARM: SAMSUNG: Remove legacy clock code
  serial: samsung: Remove support for legacy clock code
  cpufreq: s3c24xx: Remove some dead code
  ARM: S5PV210: Migrate clock handling to Common Clock Framework
  clk: samsung: Add clock driver for S5PV210 and compatible SoCs

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

8 files changed, 2726 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 67c59dc2d23..3c08b79e825 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -318,6 +318,11 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
 dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
 	s3c6410-smdk6410.dtb
+dtb-$(CONFIG_ARCH_S5PV210) += s5pv210-aquila.dtb \
+	s5pv210-goni.dtb \
+	s5pv210-smdkc110.dtb \
+	s5pv210-smdkv210.dtb \
+	s5pv210-torbreck.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \
 	r8a7740-armadillo800eva.dtb \
 	r8a7778-bockw.dtb \
diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts
new file mode 100644
index 00000000000..aa31b84a707
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-aquila.dts
@@ -0,0 +1,392 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Board device tree source for Samsung Aquila board.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+	model = "Samsung Aquila based on S5PC110";
+	compatible = "samsung,aquila", "samsung,s5pv210";
+
+	aliases {
+		i2c3 = &i2c_pmic;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200n8 root=/dev/mmcblk1p5 rw rootwait ignore_loglevel earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x30000000 0x05000000
+			0x40000000 0x18000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vtf_reg: fixed-regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "V_TF_2.8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpios = <&mp05 4 0>;
+			enable-active-high;
+		};
+
+		pda_reg: fixed-regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "VCC_1.8V_PDA";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			reg = <1>;
+		};
+
+		bat_reg: fixed-regulator@2 {
+			compatible = "regulator-fixed";
+			regulator-name = "V_BAT";
+			regulator-min-microvolt = <3700000>;
+			regulator-max-microvolt = <3700000>;
+			reg = <2>;
+		};
+	};
+
+	i2c_pmic: i2c-pmic {
+		compatible = "i2c-gpio";
+		gpios = <&gpj4 0 0>, /* sda */
+			<&gpj4 3 0>; /* scl */
+		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmic@66 {
+			compatible = "national,lp3974";
+			reg = <0x66>;
+
+			max8998,pmic-buck1-default-dvs-idx = <0>;
+			max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>,
+							<&gph0 4 0>;
+			max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
+							<1200000>, <1200000>;
+
+			max8998,pmic-buck2-default-dvs-idx = <0>;
+			max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>;
+			max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;
+
+			regulators {
+				ldo2_reg: LDO2 {
+					regulator-name = "VALIVE_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "VUSB+MIPI_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "VADC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "VTF_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "VCC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "VCC_3.0V";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "VUSB+VDAC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "VCC+VCAM_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "VPLL_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "CAM_IO_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "CAM_ISP_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "CAM_A_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "CAM_CIF_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "CAM_AF_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "VMIPI_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "CAM_8M_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "VARM_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "VINT_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "VCC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "CAM_CORE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				vichg_reg: ENVICHG {
+					regulator-name = "VICHG";
+				};
+
+				safeout1_reg: ESAFEOUT1 {
+					regulator-name = "SAFEOUT1";
+					regulator-always-on;
+				};
+
+				safeout2_reg: ESAFEOUT2 {
+					regulator-name = "SAFEOUT2";
+					regulator-boot-on;
+				};
+			};
+		};
+
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power-key {
+			gpios = <&gph2 6 1>;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+	};
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
+
+&keypad {
+	linux,input-no-autorepeat;
+	linux,input-wakeup;
+	samsung,keypad-num-rows = <3>;
+	samsung,keypad-num-columns = <3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
+			<&keypad_col0>, <&keypad_col1>, <&keypad_col2>;
+	status = "okay";
+
+	key_1 {
+		keypad,row = <0>;
+		keypad,column = <1>;
+		linux,code = <KEY_CONNECT>;
+	};
+
+	key_2 {
+		keypad,row = <0>;
+		keypad,column = <2>;
+		linux,code = <KEY_BACK>;
+	};
+
+	key_3 {
+		keypad,row = <1>;
+		keypad,column = <1>;
+		linux,code = <KEY_CAMERA_FOCUS>;
+	};
+
+	key_4 {
+		keypad,row = <1>;
+		keypad,column = <2>;
+		linux,code = <KEY_VOLUMEUP>;
+	};
+
+	key_5 {
+		keypad,row = <2>;
+		keypad,column = <1>;
+		linux,code = <KEY_CAMERA>;
+	};
+
+	key_6 {
+		keypad,row = <2>;
+		keypad,column = <2>;
+		linux,code = <KEY_VOLUMEDOWN>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&sdhci0 {
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+	vmmc-supply = <&ldo5_reg>;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>;
+	pinctrl-names = "default";
+};
+
+&sdhci2 {
+	bus-width = <4>;
+	cd-gpios = <&gph3 4 1>;
+	vmmc-supply = <&vtf_reg>;
+	cd-inverted;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &t_flash_detect>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&onenand {
+	status = "okay";
+};
+
+&hsotg {
+	vusb_a-supply = <&ldo3_reg>;
+	vusb_d-supply = <&ldo8_reg>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: timing {
+			clock-frequency = <0>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <16>;
+			hback-porch = <16>;
+			hsync-len = <2>;
+			vback-porch = <3>;
+			vfront-porch = <28>;
+			vsync-len = <1>;
+		};
+	};
+};
+
+&pinctrl0 {
+	t_flash_detect: t-flash-detect {
+		samsung,pins = "gph3-4";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts
new file mode 100644
index 00000000000..6387c77a6f7
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-goni.dts
@@ -0,0 +1,449 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Board device tree source for Samsung Goni board.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+	model = "Samsung Goni based on S5PC110";
+	compatible = "samsung,goni", "samsung,s5pv210";
+
+	aliases {
+		i2c3 = &i2c_pmic;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p5 rw rootwait ignore_loglevel earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x30000000 0x05000000
+			0x40000000 0x10000000
+			0x50000000 0x08000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vtf_reg: fixed-regulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "V_TF_2.8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			reg = <0>;
+			gpios = <&mp05 4 0>;
+			enable-active-high;
+		};
+
+		pda_reg: fixed-regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "VCC_1.8V_PDA";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			reg = <1>;
+		};
+
+		bat_reg: fixed-regulator@2 {
+			compatible = "regulator-fixed";
+			regulator-name = "V_BAT";
+			regulator-min-microvolt = <3700000>;
+			regulator-max-microvolt = <3700000>;
+			reg = <2>;
+		};
+
+		tsp_reg: fixed-regulator@3 {
+			compatible = "regulator-fixed";
+			regulator-name = "TSP_VDD";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			reg = <3>;
+			gpios = <&gpj1 3 0>;
+			enable-active-high;
+		};
+	};
+
+	i2c_pmic: i2c-pmic {
+		compatible = "i2c-gpio";
+		gpios = <&gpj4 0 0>, /* sda */
+			<&gpj4 3 0>; /* scl */
+		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmic@66 {
+			compatible = "national,lp3974";
+			reg = <0x66>;
+
+			max8998,pmic-buck1-default-dvs-idx = <0>;
+			max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>,
+							<&gph0 4 0>;
+			max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
+							<1200000>, <1200000>;
+
+			max8998,pmic-buck2-default-dvs-idx = <0>;
+			max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>;
+			max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;
+
+			regulators {
+				ldo2_reg: LDO2 {
+					regulator-name = "VALIVE_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "VUSB+MIPI_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "VADC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "VTF_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "VCC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "VLCD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "VUSB+VDAC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "VCC+VCAM_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "VPLL_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-boot-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "CAM_IO_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "CAM_ISP_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "CAM_A_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "CAM_CIF_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "CAM_AF_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "VMIPI_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "CAM_8M_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "VARM_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "VINT_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "VCC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "CAM_CORE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power-key {
+			gpios = <&gph2 6 1>;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+	};
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
+
+&keypad {
+	linux,input-no-autorepeat;
+	linux,input-wakeup;
+	samsung,keypad-num-rows = <3>;
+	samsung,keypad-num-columns = <3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
+			<&keypad_col0>, <&keypad_col1>, <&keypad_col2>;
+	status = "okay";
+
+	key_1 {
+		keypad,row = <0>;
+		keypad,column = <1>;
+		linux,code = <KEY_CONNECT>;
+	};
+
+	key_2 {
+		keypad,row = <0>;
+		keypad,column = <2>;
+		linux,code = <KEY_BACK>;
+	};
+
+	key_3 {
+		keypad,row = <1>;
+		keypad,column = <1>;
+		linux,code = <KEY_CAMERA_FOCUS>;
+	};
+
+	key_4 {
+		keypad,row = <1>;
+		keypad,column = <2>;
+		linux,code = <KEY_VOLUMEUP>;
+	};
+
+	key_5 {
+		keypad,row = <2>;
+		keypad,column = <1>;
+		linux,code = <KEY_CAMERA>;
+	};
+
+	key_6 {
+		keypad,row = <2>;
+		keypad,column = <2>;
+		linux,code = <KEY_VOLUMEDOWN>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&sdhci0 {
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&ldo5_reg>;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci2 {
+	bus-width = <4>;
+	cd-gpios = <&gph3 4 1>;
+	vmmc-supply = <&vtf_reg>;
+	cd-inverted;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hsotg {
+	vusb_a-supply = <&ldo3_reg>;
+	vusb_d-supply = <&ldo8_reg>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&i2c2 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+	samsung,i2c-slave-addr = <0x10>;
+	status = "okay";
+
+	tsp@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		interrupt-parent = <&gpj0>;
+		interrupts = <5 2>;
+
+		atmel,x-line = <17>;
+		atmel,y-line = <11>;
+		atmel,x-size = <800>;
+		atmel,y-size = <480>;
+		atmel,burst-length = <0x21>;
+		atmel,threshold = <0x28>;
+		atmel,orientation = <1>;
+
+		vdd-supply = <&tsp_reg>;
+	};
+};
+
+&i2c0 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <100000>;
+	samsung,i2c-slave-addr = <0x10>;
+	status = "okay";
+
+	noon010pc30: sensor@30 {
+		compatible = "siliconfile,noon010pc30";
+		reg = <0x30>;
+		vddio-supply = <&ldo11_reg>;
+		vdda-supply = <&ldo13_reg>;
+		vdd_core-supply = <&ldo14_reg>;
+
+		clock-frequency = <16000000>;
+		clocks = <&clock_cam 0>;
+		clock-names = "mclk";
+		nreset-gpios = <&gpb 2 0>;
+		nstby-gpios = <&gpb 0 0>;
+
+		port {
+			noon010pc30_ep: endpoint {
+				remote-endpoint = <&fimc0_ep>;
+				bus-width = <8>;
+				hsync-active = <0>;
+				vsync-active = <1>;
+				pclk-sample = <1>;
+			};
+		};
+	};
+};
+
+&camera {
+	pinctrl-0 = <&cam_port_a_io &cam_port_a_clk_active>;
+	pinctrl-1 = <&cam_port_a_io &cam_port_a_clk_idle>;
+	pinctrl-names = "default", "idle";
+
+	parallel-ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* camera A input */
+		port@1 {
+			reg = <1>;
+			fimc0_ep: endpoint {
+				remote-endpoint = <&noon010pc30_ep>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				pclk-sample = <0>;
+			};
+		};
+	};
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk &lcd_data24>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: timing {
+			/* 480x800@55Hz */
+			clock-frequency = <23439570>;
+			hactive = <480>;
+			hfront-porch = <16>;
+			hback-porch = <16>;
+			hsync-len = <2>;
+			vactive = <800>;
+			vback-porch = <2>;
+			vfront-porch = <28>;
+			vsync-len = <1>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <0>;
+			pixelclk-active = <0>;
+		};
+	};
+};
+
+&onenand {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
new file mode 100644
index 00000000000..8c714088e3c
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
@@ -0,0 +1,839 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&pinctrl0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb: gpb {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj0: gpj0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj1: gpj1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj2: gpj2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj3: gpj3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj4: gpj4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpgi: gpgi {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp01: mp01 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp02: mp02 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp03: mp03 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp04: mp04 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp05: mp05 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp06: mp06 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp07: mp07 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gph0: gph0 {
+		gpio-controller;
+		interrupt-controller;
+		interrupt-parent = <&vic0>;
+		interrupts = <0>, <1>, <2>, <3>,
+				<4>, <5>, <6>, <7>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1 {
+		gpio-controller;
+		interrupt-controller;
+		interrupt-parent = <&vic0>;
+		interrupts = <8>, <9>, <10>, <11>,
+				<12>, <13>, <14>, <15>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+	};
+
+	gph2: gph2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+	};
+
+	gph3: gph3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_fctl: uart2-fctl {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart_audio: uart-audio {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s0_bus: i2s0-bus {
+		samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
+				"gpi-4", "gpi-5", "gpi-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s1_bus: i2s1-bus {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm1_bus: pcm1-bus {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	ac97_bus: ac97-bus {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm2_bus: pcm2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spdif_bus: spdif-bus {
+		samsung,pins = "gpc1-0", "gpc1-1";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
+		samsung,pin-function = <5>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c2_bus: i2c2-bus {
+		samsung,pins = "gpd1-4", "gpd1-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpd0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpd0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpd0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpd0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_row0: keypad-row-0 {
+		samsung,pins = "gph3-0";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_row1: keypad-row-1 {
+		samsung,pins = "gph3-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_row2: keypad-row-2 {
+		samsung,pins = "gph3-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_row3: keypad-row-3 {
+		samsung,pins = "gph3-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_row4: keypad-row-4 {
+		samsung,pins = "gph3-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_row5: keypad-row-5 {
+		samsung,pins = "gph3-5";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_row6: keypad-row-6 {
+		samsung,pins = "gph3-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_row7: keypad-row-7 {
+		samsung,pins = "gph3-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_col0: keypad-col-0 {
+		samsung,pins = "gph2-0";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_col1: keypad-col-1 {
+		samsung,pins = "gph2-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_col2: keypad-col-2 {
+		samsung,pins = "gph2-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_col3: keypad-col-3 {
+		samsung,pins = "gph2-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_col4: keypad-col-4 {
+		samsung,pins = "gph2-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_col5: keypad-col-5 {
+		samsung,pins = "gph2-5";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_col6: keypad-col-6 {
+		samsung,pins = "gph2-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_col7: keypad-col-7 {
+		samsung,pins = "gph2-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpg0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpg0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpg0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpg0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpg0-3", "gpg0-4", "gpg0-5", "gpg0-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpg1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpg1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cd: sd1-cd {
+		samsung,pins = "gpg1-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpg1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpg2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpg2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpg2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpg2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpg2-3", "gpg2-4", "gpg2-5", "gpg2-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus8: sd2-bus-width8 {
+		samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd3_clk: sd3-clk {
+		samsung,pins = "gpg3-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd3_cmd: sd3-cmd {
+		samsung,pins = "gpg3-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd3_cd: sd3-cd {
+		samsung,pins = "gpg3-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd3_bus1: sd3-bus-width1 {
+		samsung,pins = "gpg3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd3_bus4: sd3-bus-width4 {
+		samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	eint0: ext-int0 {
+		samsung,pins = "gph0-0";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	eint8: ext-int8 {
+		samsung,pins = "gph1-0";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	eint15: ext-int15 {
+		samsung,pins = "gph1-7";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	eint16: ext-int16 {
+		samsung,pins = "gph2-0";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	eint31: ext-int31 {
+		samsung,pins = "gph3-7";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_port_a_io: cam-port-a-io {
+		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+				"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+				"gpe1-0", "gpe1-1", "gpe1-2", "gpe1-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_port_a_clk_active: cam-port-a-clk-active {
+		samsung,pins = "gpe1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	cam_port_a_clk_idle: cam-port-a-clk-idle {
+		samsung,pins = "gpe1-3";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_port_b_io: cam-port-b-io {
+		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
+				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
+				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_port_b_clk_active: cam-port-b-clk-active {
+		samsung,pins = "gpj1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	cam_port_b_clk_idle: cam-port-b-clk-idle {
+		samsung,pins = "gpj1-3";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+
+		lcd_ctrl: lcd-ctrl {
+		samsung,pins = "gpd0-0", "gpd0-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	lcd_sync: lcd-sync {
+		samsung,pins = "gpf0-0", "gpf0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	lcd_clk: lcd-clk {
+		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	lcd_data24: lcd-data-width24 {
+		samsung,pins =  "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
+				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
+				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
+				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+				"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
+				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/s5pv210-smdkc110.dts b/arch/arm/boot/dts/s5pv210-smdkc110.dts
new file mode 100644
index 00000000000..1eedab7ffe9
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-smdkc110.dts
@@ -0,0 +1,78 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Board device tree source for YIC System SMDC110 board.
+ *
+ * NOTE: This file is completely based on original board file for mach-smdkc110
+ * available in Linux 3.15 and intends to provide equivalent level of hardware
+ * support. Due to lack of hardware, _no_ testing has been performed.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+	model = "YIC System SMDKC110 based on S5PC110";
+	compatible = "yic,smdkc110", "samsung,s5pv210";
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x20000000 0x20000000>;
+	};
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	audio-codec@1b {
+		compatible = "wlf,wm8580";
+		reg = <0x1b>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts
new file mode 100644
index 00000000000..cb8521899ec
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts
@@ -0,0 +1,238 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Board device tree source for YIC System SMDV210 board.
+ *
+ * NOTE: This file is completely based on original board file for mach-smdkv210
+ * available in Linux 3.15 and intends to provide equivalent level of hardware
+ * support. Due to lack of hardware, _no_ testing has been performed.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+	model = "YIC System SMDKV210 based on S5PV210";
+	compatible = "yic,smdkv210", "samsung,s5pv210";
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x20000000 0x40000000>;
+	};
+
+	ethernet@18000000 {
+		compatible = "davicom,dm9000";
+		reg = <0xA8000000 0x2 0xA8000002 0x2>;
+		interrupt-parent = <&gph1>;
+		interrupts = <1 4>;
+		local-mac-address = [00 00 de ad be ef];
+		davicom,no-eeprom;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_out>;
+	};
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
+
+&keypad {
+	linux,input-no-autorepeat;
+	linux,input-wakeup;
+	samsung,keypad-num-rows = <8>;
+	samsung,keypad-num-columns = <8>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
+			<&keypad_row3>, <&keypad_row4>, <&keypad_row5>,
+			<&keypad_row6>, <&keypad_row7>,
+			<&keypad_col0>, <&keypad_col1>, <&keypad_col2>,
+			<&keypad_col3>, <&keypad_col4>, <&keypad_col5>,
+			<&keypad_col6>, <&keypad_col7>;
+	status = "okay";
+
+	key_1 {
+		keypad,row = <0>;
+		keypad,column = <3>;
+		linux,code = <KEY_1>;
+	};
+
+	key_2 {
+		keypad,row = <0>;
+		keypad,column = <4>;
+		linux,code = <KEY_2>;
+	};
+
+	key_3 {
+		keypad,row = <0>;
+		keypad,column = <5>;
+		linux,code = <KEY_3>;
+	};
+
+	key_4 {
+		keypad,row = <0>;
+		keypad,column = <6>;
+		linux,code = <KEY_4>;
+	};
+
+	key_5 {
+		keypad,row = <0
+		>;
+		keypad,column = <7>;
+		linux,code = <KEY_5>;
+	};
+
+	key_6 {
+		keypad,row = <1>;
+		keypad,column = <3>;
+		linux,code = <KEY_A>;
+	};
+	key_7 {
+		keypad,row = <1>;
+		keypad,column = <4>;
+		linux,code = <KEY_B>;
+	};
+
+	key_8 {
+		keypad,row = <1>;
+		keypad,column = <5>;
+		linux,code = <KEY_C>;
+	};
+
+	key_9 {
+		keypad,row = <1>;
+		keypad,column = <6>;
+		linux,code = <KEY_D>;
+	};
+
+	key_10 {
+		keypad,row = <1>;
+		keypad,column = <7>;
+		linux,code = <KEY_E>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdhci0 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci1 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci3 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hsotg {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk &lcd_data24>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	display-timings {
+		native-mode = <&timing0>;
+
+		timing0: timing@0 {
+			/* 800x480@60Hz */
+			clock-frequency = <24373920>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <8>;
+			hback-porch = <13>;
+			hsync-len = <3>;
+			vback-porch = <7>;
+			vfront-porch = <5>;
+			vsync-len = <1>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+};
+
+&pwm {
+	samsung,pwm-outputs = <3>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	audio-codec@1b {
+		compatible = "wlf,wm8580";
+		reg = <0x1b>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/s5pv210-torbreck.dts b/arch/arm/boot/dts/s5pv210-torbreck.dts
new file mode 100644
index 00000000000..622599fd2cf
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-torbreck.dts
@@ -0,0 +1,92 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Board device tree source for Torbreck board.
+ *
+ * NOTE: This file is completely based on original board file for mach-torbreck
+ * available in Linux 3.15 and intends to provide equivalent level of hardware
+ * support. Due to lack of hardware, _no_ testing has been performed.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+	model = "aESOP Torbreck based on S5PV210";
+	compatible = "aesop,torbreck", "samsung,s5pv210";
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x20000000 0x20000000>;
+	};
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdhci0 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci1 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci3 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
new file mode 100644
index 00000000000..8344a0ee2b8
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -0,0 +1,633 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/s5pv210.h>
+#include <dt-bindings/clock/s5pv210-audss.h>
+
+/ {
+	aliases {
+		csis0 = &csis0;
+		fimc0 = &fimc0;
+		fimc1 = &fimc1;
+		fimc2 = &fimc2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2s0 = &i2s0;
+		i2s1 = &i2s1;
+		i2s2 = &i2s2;
+		pinctrl0 = &pinctrl0;
+		spi0 = &spi0;
+		spi1 = &spi1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		external-clocks {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			xxti: oscillator@0 {
+				compatible = "fixed-clock";
+				reg = <0>;
+				clock-frequency = <0>;
+				clock-output-names = "xxti";
+				#clock-cells = <0>;
+			};
+
+			xusbxti: oscillator@1 {
+				compatible = "fixed-clock";
+				reg = <1>;
+				clock-frequency = <0>;
+				clock-output-names = "xusbxti";
+				#clock-cells = <0>;
+			};
+		};
+
+		onenand: onenand@b0000000 {
+			compatible = "samsung,s5pv210-onenand";
+			reg = <0xb0600000 0x2000>,
+				<0xb0000000 0x20000>,
+				<0xb0040000 0x20000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <31>;
+			clocks = <&clocks CLK_NANDXL>, <&clocks DOUT_FLASH>;
+			clock-names = "bus", "onenand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
+		chipid@e0000000 {
+			compatible = "samsung,s5pv210-chipid";
+			reg = <0xe0000000 0x1000>;
+		};
+
+		clocks: clock-controller@e0100000 {
+			compatible = "samsung,s5pv210-clock", "simple-bus";
+			reg = <0xe0100000 0x10000>;
+			clock-names = "xxti", "xusbxti";
+			clocks = <&xxti>, <&xusbxti>;
+			#clock-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pmu_syscon: syscon@e0108000 {
+				compatible = "samsung-s5pv210-pmu", "syscon";
+				reg = <0xe0108000 0x8000>;
+			};
+		};
+
+		pinctrl0: pinctrl@e0200000 {
+			compatible = "samsung,s5pv210-pinctrl";
+			reg = <0xe0200000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <30>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupts = <16>;
+				interrupt-parent = <&vic0>;
+			};
+		};
+
+		amba {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "arm,amba-bus";
+			ranges;
+
+			pdma0: dma@e0900000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0xe0900000 0x1000>;
+				interrupt-parent = <&vic0>;
+				interrupts = <19>;
+				clocks = <&clocks CLK_PDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			pdma1: dma@e0a00000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0xe0a00000 0x1000>;
+				interrupt-parent = <&vic0>;
+				interrupts = <20>;
+				clocks = <&clocks CLK_PDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+		};
+
+		spi0: spi@e1300000 {
+			compatible = "samsung,s5pv210-spi";
+			reg = <0xe1300000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <15>;
+			dmas = <&pdma0 7>, <&pdma0 6>;
+			dma-names = "tx", "rx";
+			clocks = <&clocks SCLK_SPI0>, <&clocks CLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@e1400000 {
+			compatible = "samsung,s5pv210-spi";
+			reg = <0xe1400000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <16>;
+			dmas = <&pdma1 7>, <&pdma1 6>;
+			dma-names = "tx", "rx";
+			clocks = <&clocks SCLK_SPI1>, <&clocks CLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		keypad: keypad@e1600000 {
+			compatible = "samsung,s5pv210-keypad";
+			reg = <0xe1600000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <25>;
+			clocks = <&clocks CLK_KEYIF>;
+			clock-names = "keypad";
+			status = "disabled";
+		};
+
+		i2c0: i2c@e1800000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0xe1800000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <14>;
+			clocks = <&clocks CLK_I2C0>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_bus>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e1a00000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0xe1a00000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <19>;
+			clocks = <&clocks CLK_I2C2>;
+			clock-names = "i2c";
+			pinctrl-0 = <&i2c2_bus>;
+			pinctrl-names = "default";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		audio-subsystem {
+			compatible = "samsung,s5pv210-audss", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clk_audss: clock-controller@eee10000 {
+				compatible = "samsung,s5pv210-audss-clock";
+				reg = <0xeee10000 0x1000>;
+				clock-names = "hclk", "xxti",
+						"fout_epll",
+						"sclk_audio0";
+				clocks = <&clocks DOUT_HCLKP>, <&xxti>,
+						<&clocks FOUT_EPLL>,
+						<&clocks SCLK_AUDIO0>;
+				#clock-cells = <1>;
+			};
+
+			i2s0: i2s@eee30000 {
+				compatible = "samsung,s5pv210-i2s";
+				reg = <0xeee30000 0x1000>;
+				interrupt-parent = <&vic2>;
+				interrupts = <16>;
+				dma-names = "rx", "tx", "tx-sec";
+				dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
+				clock-names = "iis",
+						"i2s_opclk0",
+						"i2s_opclk1";
+				clocks = <&clk_audss CLK_I2S>,
+						<&clk_audss CLK_I2S>,
+						<&clk_audss CLK_DOUT_AUD_BUS>;
+				samsung,idma-addr = <0xc0010000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2s0_bus>;
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		i2s1: i2s@e2100000 {
+			compatible = "samsung,s3c6410-i2s";
+			reg = <0xe2100000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <17>;
+			dma-names = "rx", "tx";
+			dmas = <&pdma1 12>, <&pdma1 13>;
+			clock-names = "iis", "i2s_opclk0";
+			clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s1_bus>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		i2s2: i2s@e2a00000 {
+			compatible = "samsung,s3c6410-i2s";
+			reg = <0xe2a00000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <18>;
+			dma-names = "rx", "tx";
+			dmas = <&pdma1 14>, <&pdma1 15>;
+			clock-names = "iis", "i2s_opclk0";
+			clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s2_bus>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm: pwm@e2500000 {
+			compatible = "samsung,s5pc100-pwm";
+			reg = <0xe2500000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <21>, <22>, <23>, <24>, <25>;
+			clock-names = "timers";
+			clocks = <&clocks CLK_PWM>;
+			#pwm-cells = <3>;
+		};
+
+		watchdog: watchdog@e2700000 {
+			compatible = "samsung,s3c2410-wdt";
+			reg = <0xe2700000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <26>;
+			clock-names = "watchdog";
+			clocks = <&clocks CLK_WDT>;
+		};
+
+		rtc: rtc@e2800000 {
+			compatible = "samsung,s3c6410-rtc";
+			reg = <0xe2800000 0x100>;
+			interrupt-parent = <&vic0>;
+			interrupts = <28>, <29>;
+			clocks = <&clocks CLK_RTC>;
+			clock-names = "rtc";
+			status = "disabled";
+		};
+
+		uart0: serial@e2900000 {
+			compatible = "samsung,s5pv210-uart";
+			reg = <0xe2900000 0x400>;
+			interrupt-parent = <&vic1>;
+			interrupts = <10>;
+			clock-names = "uart", "clk_uart_baud0",
+					"clk_uart_baud1";
+			clocks = <&clocks CLK_UART0>, <&clocks CLK_UART0>,
+					<&clocks SCLK_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@e2900400 {
+			compatible = "samsung,s5pv210-uart";
+			reg = <0xe2900400 0x400>;
+			interrupt-parent = <&vic1>;
+			interrupts = <11>;
+			clock-names = "uart", "clk_uart_baud0",
+					"clk_uart_baud1";
+			clocks = <&clocks CLK_UART1>, <&clocks CLK_UART1>,
+					<&clocks SCLK_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@e2900800 {
+			compatible = "samsung,s5pv210-uart";
+			reg = <0xe2900800 0x400>;
+			interrupt-parent = <&vic1>;
+			interrupts = <12>;
+			clock-names = "uart", "clk_uart_baud0",
+					"clk_uart_baud1";
+			clocks = <&clocks CLK_UART2>, <&clocks CLK_UART2>,
+					<&clocks SCLK_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@e2900c00 {
+			compatible = "samsung,s5pv210-uart";
+			reg = <0xe2900c00 0x400>;
+			interrupt-parent = <&vic1>;
+			interrupts = <13>;
+			clock-names = "uart", "clk_uart_baud0",
+					"clk_uart_baud1";
+			clocks = <&clocks CLK_UART3>, <&clocks CLK_UART3>,
+					<&clocks SCLK_UART3>;
+			status = "disabled";
+		};
+
+		sdhci0: sdhci@eb000000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0xeb000000 0x100000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <26>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks CLK_HSMMC0>, <&clocks CLK_HSMMC0>,
+					<&clocks SCLK_MMC0>;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@eb100000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0xeb100000 0x100000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <27>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks CLK_HSMMC1>, <&clocks CLK_HSMMC1>,
+					<&clocks SCLK_MMC1>;
+			status = "disabled";
+		};
+
+		sdhci2: sdhci@eb200000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0xeb200000 0x100000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <28>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks CLK_HSMMC2>, <&clocks CLK_HSMMC2>,
+					<&clocks SCLK_MMC2>;
+			status = "disabled";
+		};
+
+		sdhci3: sdhci@eb300000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0xeb300000 0x100000>;
+			interrupt-parent = <&vic3>;
+			interrupts = <2>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.3";
+			clocks = <&clocks CLK_HSMMC3>, <&clocks CLK_HSMMC3>,
+					<&clocks SCLK_MMC3>;
+			status = "disabled";
+		};
+
+		hsotg: hsotg@ec000000 {
+			compatible = "samsung,s3c6400-hsotg";
+			reg = <0xec000000 0x20000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <24>;
+			clocks = <&clocks CLK_USB_OTG>;
+			clock-names = "otg";
+			phy-names = "usb2-phy";
+			phys = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: usbphy@ec100000 {
+			compatible = "samsung,s5pv210-usb2-phy";
+			reg = <0xec100000 0x100>;
+			samsung,pmureg-phandle = <&pmu_syscon>;
+			clocks = <&clocks CLK_USB_OTG>, <&xusbxti>;
+			clock-names = "phy", "ref";
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		ehci: ehci@ec200000 {
+			compatible = "samsung,exynos4210-ehci";
+			reg = <0xec200000 0x100>;
+			interrupts = <23>;
+			interrupt-parent = <&vic1>;
+			clocks = <&clocks CLK_USB_HOST>;
+			clock-names = "usbhost";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			port@0 {
+				reg = <0>;
+				phys = <&usbphy 1>;
+			};
+		};
+
+		ohci: ohci@ec300000 {
+			compatible = "samsung,exynos4210-ohci";
+			reg = <0xec300000 0x100>;
+			interrupts = <23>;
+			clocks = <&clocks CLK_USB_HOST>;
+			clock-names = "usbhost";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			port@0 {
+				reg = <0>;
+				phys = <&usbphy 1>;
+			};
+		};
+
+		mfc: codec@f1700000 {
+			compatible = "samsung,mfc-v5";
+			reg = <0xf1700000 0x10000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <14>;
+			clocks = <&clocks DOUT_MFC>, <&clocks CLK_MFC>;
+			clock-names = "sclk_mfc", "mfc";
+		};
+
+		vic0: interrupt-controller@f2000000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0xf2000000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic1: interrupt-controller@f2100000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0xf2100000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic2: interrupt-controller@f2200000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0xf2200000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic3: interrupt-controller@f2300000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0xf2300000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		fimd: fimd@f8000000 {
+			compatible = "samsung,exynos4210-fimd";
+			interrupt-parent = <&vic2>;
+			reg = <0xf8000000 0x20000>;
+			interrupt-names = "fifo", "vsync", "lcd_sys";
+			interrupts = <0>, <1>, <2>;
+			clocks = <&clocks SCLK_FIMD>, <&clocks CLK_FIMD>;
+			clock-names = "sclk_fimd", "fimd";
+			status = "disabled";
+		};
+
+		g2d: g2d@fa000000 {
+			compatible = "samsung,s5pv210-g2d";
+			reg = <0xfa000000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <9>;
+			clocks = <&clocks DOUT_G2D>, <&clocks CLK_G2D>;
+			clock-names = "sclk_fimg2d", "fimg2d";
+		};
+
+		mdma1: mdma@fa200000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xfa200000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <18>;
+			clocks = <&clocks CLK_MDMA>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
+		};
+
+		i2c1: i2c@fab00000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0xfab00000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <13>;
+			clocks = <&clocks CLK_I2C1>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_bus>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		camera: camera {
+			compatible = "samsung,fimc", "simple-bus";
+			pinctrl-names = "default";
+			pinctrl-0 = <>;
+			clocks = <&clocks SCLK_CAM0>, <&clocks SCLK_CAM1>;
+			clock-names = "sclk_cam0", "sclk_cam1";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clock_cam: clock-controller {
+				#clock-cells = <1>;
+			};
+
+			csis0: csis@fa600000 {
+				compatible = "samsung,s5pv210-csis";
+				reg = <0xfa600000 0x4000>;
+				interrupt-parent = <&vic2>;
+				interrupts = <29>;
+				clocks = <&clocks CLK_CSIS>,
+						<&clocks SCLK_CSIS>;
+				clock-names = "clk_csis",
+						"sclk_csis";
+				bus-width = <4>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			fimc0: fimc@fb200000 {
+				compatible = "samsung,s5pv210-fimc";
+				reg = <0xfb200000 0x1000>;
+				interrupts = <5>;
+				interrupt-parent = <&vic2>;
+				clocks = <&clocks CLK_FIMC0>,
+						<&clocks SCLK_FIMC0>;
+				clock-names = "fimc",
+						"sclk_fimc";
+				samsung,pix-limits = <4224 8192 1920 4224>;
+				samsung,mainscaler-ext;
+				samsung,cam-if;
+			};
+
+			fimc1: fimc@fb300000 {
+				compatible = "samsung,s5pv210-fimc";
+				reg = <0xfb300000 0x1000>;
+				interrupt-parent = <&vic2>;
+				interrupts = <6>;
+				clocks = <&clocks CLK_FIMC1>,
+						<&clocks SCLK_FIMC1>;
+				clock-names = "fimc",
+						"sclk_fimc";
+				samsung,pix-limits = <4224 8192 1920 4224>;
+				samsung,mainscaler-ext;
+				samsung,cam-if;
+			};
+
+			fimc2: fimc@fb400000 {
+				compatible = "samsung,s5pv210-fimc";
+				reg = <0xfb400000 0x1000>;
+				interrupt-parent = <&vic2>;
+				interrupts = <7>;
+				clocks = <&clocks CLK_FIMC2>,
+						<&clocks SCLK_FIMC2>;
+				clock-names = "fimc",
+						"sclk_fimc";
+				samsung,pix-limits = <4224 8192 1920 4224>;
+				samsung,mainscaler-ext;
+				samsung,lcd-wb;
+			};
+		};
+	};
+};
+
+#include "s5pv210-pinctrl.dtsi"