summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2013-06-20 02:06:36 +0200
committerArnd Bergmann <arnd@arndb.de>2013-06-20 02:06:36 +0200
commitd5a51af940efec07c969bdb5fe478bb518116404 (patch)
tree26291e51122081d929e3cac3d441ee5efbfa75d6 /arch/arm/boot
parenta44bde66bec168889c95bd1d0d15834b02387901 (diff)
parentd75f3d92e86e65b3cb9725e65f7278cc303511db (diff)
Merge tag 'mxs-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt
From Shawn Guo: mxs device tree changes for 3.11: * A couple of new board support, cfa10055 and cfa10057 * A few updates on cfa10036 device tree source * Some auart pinctrl data addition * Adopt soc bus infrastructure for mach-mxs * tag 'mxs-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: dt: Add Crystalfontz CFA-10057 device tree ARM: mxs: dt: Add the Crystalfontz CFA-10055 device tree ARM: cfa10049: Switch the chip select pin of the LCD controller ARM: cfa10036: Add USB0 OTG port ARM: dts: apf28dev: Add touchscreen support for APF28dev ARM: mxs: Fix UARTs on M28EVK ARM: cfa10036: dt: Change i2c0 clock frequency ARM: dts: cfa10036: Change the OLED display to SSD1306 ARM: mx28: add auart4 2 pins pinmux to imx28.dtsi ARM: mx28: add auart3 2 pins pinmux to imx28.dtsi ARM: mx28: add auart2 2 pins pinmux to imx28.dtsi ARM: mxs: Use soc bus infrastructure ARM: dts: mx28: Adjust the digctl compatible string ARM: mxs: Remove init_irq declaration in machine description Includes an update to 3.10-rc6 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch/arm/boot')
-rw-r--r--arch/arm/boot/compressed/Makefile2
-rw-r--r--arch/arm/boot/compressed/debug.S28
-rw-r--r--arch/arm/boot/compressed/head-sa1100.S1
-rw-r--r--arch/arm/boot/compressed/head-shark.S1
-rw-r--r--arch/arm/boot/compressed/head.S5
-rw-r--r--arch/arm/boot/dts/Makefile2
-rw-r--r--arch/arm/boot/dts/am33xx.dtsi4
-rw-r--r--arch/arm/boot/dts/armada-xp-gp.dts5
-rw-r--r--arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts5
-rw-r--r--arch/arm/boot/dts/imx28-apf28dev.dts1
-rw-r--r--arch/arm/boot/dts/imx28-cfa10036.dts38
-rw-r--r--arch/arm/boot/dts/imx28-cfa10049.dts8
-rw-r--r--arch/arm/boot/dts/imx28-cfa10055.dts179
-rw-r--r--arch/arm/boot/dts/imx28-cfa10057.dts191
-rw-r--r--arch/arm/boot/dts/imx28-m28evk.dts14
-rw-r--r--arch/arm/boot/dts/imx28.dtsi35
-rw-r--r--arch/arm/boot/dts/omap4-panda-common.dtsi20
-rw-r--r--arch/arm/boot/dts/omap4-sdp.dts20
-rw-r--r--arch/arm/boot/dts/omap5.dtsi3
19 files changed, 538 insertions, 24 deletions
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 3580d57ea21..79e9bdbfc49 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -124,7 +124,7 @@ KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
endif
ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj)
-asflags-y := -Wa,-march=all -DZIMAGE
+asflags-y := -DZIMAGE
# Supply kernel BSS size to the decompressor via a linker symbol.
KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \
diff --git a/arch/arm/boot/compressed/debug.S b/arch/arm/boot/compressed/debug.S
index 6e8382d5b7a..5392ee63338 100644
--- a/arch/arm/boot/compressed/debug.S
+++ b/arch/arm/boot/compressed/debug.S
@@ -1,6 +1,8 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
+#ifndef CONFIG_DEBUG_SEMIHOSTING
+
#include CONFIG_DEBUG_LL_INCLUDE
ENTRY(putc)
@@ -10,3 +12,29 @@ ENTRY(putc)
busyuart r3, r1
mov pc, lr
ENDPROC(putc)
+
+#else
+
+ENTRY(putc)
+ adr r1, 1f
+ ldmia r1, {r2, r3}
+ add r2, r2, r1
+ ldr r1, [r2, r3]
+ strb r0, [r1]
+ mov r0, #0x03 @ SYS_WRITEC
+ ARM( svc #0x123456 )
+ THUMB( svc #0xab )
+ mov pc, lr
+ .align 2
+1: .word _GLOBAL_OFFSET_TABLE_ - .
+ .word semi_writec_buf(GOT)
+ENDPROC(putc)
+
+ .bss
+ .global semi_writec_buf
+ .type semi_writec_buf, %object
+semi_writec_buf:
+ .space 4
+ .size semi_writec_buf, 4
+
+#endif
diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S
index 6179d94dd5c..3115e313d9f 100644
--- a/arch/arm/boot/compressed/head-sa1100.S
+++ b/arch/arm/boot/compressed/head-sa1100.S
@@ -11,6 +11,7 @@
#include <asm/mach-types.h>
.section ".start", "ax"
+ .arch armv4
__SA1100_start:
diff --git a/arch/arm/boot/compressed/head-shark.S b/arch/arm/boot/compressed/head-shark.S
index 089c560e07f..92b56897ed6 100644
--- a/arch/arm/boot/compressed/head-shark.S
+++ b/arch/arm/boot/compressed/head-shark.S
@@ -18,6 +18,7 @@
.section ".start", "ax"
+ .arch armv4
b __beginning
__ofw_data: .long 0 @ the number of memory blocks
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index fe4d9c3ad76..032a8d98714 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -11,6 +11,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
+ .arch armv7-a
/*
* Debugging stuff
*
@@ -805,8 +806,8 @@ call_cache_fn: adr r12, proc_types
.align 2
.type proc_types,#object
proc_types:
- .word 0x00000000 @ old ARM ID
- .word 0x0000f000
+ .word 0x41000000 @ old ARM ID
+ .word 0xff00f000
mov pc, lr
THUMB( nop )
mov pc, lr
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4c904a8e458..6ef71f4d573 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -134,6 +134,8 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
imx28-cfa10036.dtb \
imx28-cfa10037.dtb \
imx28-cfa10049.dtb \
+ imx28-cfa10055.dtb \
+ imx28-cfa10057.dtb \
imx28-evk.dtb \
imx28-m28evk.dtb \
imx28-sps1.dtb \
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 6827853a0a8..27c99c10662 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -413,8 +413,8 @@
ti,hwmods = "gpmc";
reg = <0x50000000 0x2000>;
interrupts = <100>;
- num-cs = <7>;
- num-waitpins = <2>;
+ gpmc,num-cs = <7>;
+ gpmc,num-waitpins = <2>;
#address-cells = <2>;
#size-cells = <1>;
status = "disabled";
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 0a040705a72..c87b2de29c3 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -39,8 +39,9 @@
};
soc {
- ranges = <0 0 0xd0000000 0x100000
- 0xf0000000 0 0xf0000000 0x1000000>;
+ ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */
+ 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */
+ 0xf0000000 0 0xf0000000 0x1000000 /* Device Bus, NOR 16MiB */>;
internal-regs {
serial@12000 {
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 685ee7a282e..8f510458ea8 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -27,8 +27,9 @@
};
soc {
- ranges = <0 0 0xd0000000 0x100000
- 0xf0000000 0 0xf0000000 0x8000000>;
+ ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */
+ 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */
+ 0xf0000000 0 0xf0000000 0x8000000 /* Device Bus, NOR 128MiB */>;
internal-regs {
serial@12000 {
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
index 3d905d16cbe..b602494c152 100644
--- a/arch/arm/boot/dts/imx28-apf28dev.dts
+++ b/arch/arm/boot/dts/imx28-apf28dev.dts
@@ -103,6 +103,7 @@
apbx@80040000 {
lradc@80050000 {
+ fsl,lradc-touchscreen-wires = <4>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index 1594694532b..94c4476972c 100644
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -45,6 +45,17 @@
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
+
+ usb0_otg_cfa10036: otg-10036@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0142 /* MX28_PAD_GPMI_READY0__USB0_ID */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
};
ssp0: ssp@80010000 {
@@ -58,12 +69,6 @@
};
apbx@80040000 {
- pwm: pwm@80064000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm4_pins_a>;
- status = "okay";
- };
-
duart: serial@80074000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_b>;
@@ -73,15 +78,30 @@
i2c0: i2c@80058000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_b>;
+ clock-frequency = <400000>;
status = "okay";
- ssd1307: oled@3c {
- compatible = "solomon,ssd1307fb-i2c";
+ ssd1306: oled@3c {
+ compatible = "solomon,ssd1306fb-i2c";
reg = <0x3c>;
- pwms = <&pwm 4 3000>;
reset-gpios = <&gpio2 7 0>;
+ solomon,height = <32>;
+ solomon,width = <128>;
+ solomon,page-offset = <0>;
};
};
+
+ usbphy0: usbphy@8007c000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ usb0: usb@80080000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_otg_cfa10036>;
+ status = "okay";
};
};
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index 063e6205989..04b2f769ffb 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -33,7 +33,7 @@
0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
- 0x3173 /* MX28_PAD_LCD_RESET__GPIO_3_23 */
+ 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
@@ -166,8 +166,8 @@
apbx@80040000 {
pwm: pwm@80064000 {
- pinctrl-names = "default", "default";
- pinctrl-1 = <&pwm3_pins_b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_pins_b>;
status = "okay";
};
@@ -265,7 +265,7 @@
gpio-sck = <&gpio2 16 0>;
gpio-mosi = <&gpio2 17 0>;
gpio-miso = <&gpio2 18 0>;
- cs-gpios = <&gpio3 23 0>;
+ cs-gpios = <&gpio3 5 0>;
num-chipselects = <1>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts
new file mode 100644
index 00000000000..15811124412
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10055.dts
@@ -0,0 +1,179 @@
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10055 is an expansion board for the CFA-10036 module and
+ * CFA-10037, thus we need to include the CFA-10037 DTS.
+ */
+/include/ "imx28-cfa10037.dts"
+
+/ {
+ model = "Crystalfontz CFA-10055 Board";
+ compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
+
+ apb@80000000 {
+ apbh@80000000 {
+ pinctrl@80018000 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&hog_pins_cfa10055
+ &hog_pins_cfa10055_pullup>;
+
+ hog_pins_cfa10055: hog-10055@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ hog_pins_cfa10055_pullup: hog-10055-pullup@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ spi2_pins_cfa10055: spi2-cfa10055@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
+ 0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
+ 0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
+ 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
+ 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
+ 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
+ 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
+ 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
+ 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
+ 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
+ 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
+ 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
+ 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
+ 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
+ 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
+ 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
+ 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
+ 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
+ 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
+ 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ lcdif_pins_cfa10055: lcdif-evk@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+ 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+ 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+ 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+ };
+
+ lcdif@80030000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdif_18bit_pins_cfa10055
+ &lcdif_pins_cfa10055>;
+ display = <&display>;
+ status = "okay";
+
+ display: display {
+ bits-per-pixel = <32>;
+ bus-width = <18>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <9216000>;
+ hactive = <320>;
+ vactive = <480>;
+ hback-porch = <2>;
+ hfront-porch = <2>;
+ vback-porch = <2>;
+ vfront-porch = <2>;
+ hsync-len = <15>;
+ vsync-len = <15>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
+ };
+ };
+
+ apbx@80040000 {
+ lradc@80050000 {
+ fsl,lradc-touchscreen-wires = <4>;
+ status = "okay";
+ };
+
+ pwm: pwm@80064000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_pins_b>;
+ status = "okay";
+ };
+ };
+ };
+
+ spi2 {
+ compatible = "spi-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins_cfa10055>;
+ status = "okay";
+ gpio-sck = <&gpio2 16 0>;
+ gpio-mosi = <&gpio2 17 0>;
+ gpio-miso = <&gpio2 18 0>;
+ cs-gpios = <&gpio3 5 0>;
+ num-chipselects = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hx8357: hx8357@0 {
+ compatible = "himax,hx8357b", "himax,hx8357";
+ reg = <0>;
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+ gpios-reset = <&gpio3 30 0>;
+ };
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 3 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
new file mode 100644
index 00000000000..2da713cdb42
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -0,0 +1,191 @@
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10057 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+/include/ "imx28-cfa10036.dts"
+
+/ {
+ model = "Crystalfontz CFA-10057 Board";
+ compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28";
+
+ apb@80000000 {
+ apbh@80000000 {
+ pinctrl@80018000 {
+ pinctrl-names = "default", "default";
+ pinctrl-1 = <&hog_pins_cfa10057
+ &hog_pins_cfa10057_pullup>;
+
+ hog_pins_cfa10057: hog-10057@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+ 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ hog_pins_cfa10057_pullup: hog-10057-pullup@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
+ 0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
+ 0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
+ 0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
+ 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
+ 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
+ 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
+ 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
+ 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
+ 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
+ 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
+ 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
+ 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
+ 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
+ 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
+ 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
+ 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
+ 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
+ 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
+ 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
+ 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
+ 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ lcdif_pins_cfa10057: lcdif-evk@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+ 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+ 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+ 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+ };
+
+ lcdif@80030000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdif_18bit_pins_cfa10057
+ &lcdif_pins_cfa10057>;
+ display = <&display>;
+ status = "okay";
+
+ display: display {
+ bits-per-pixel = <32>;
+ bus-width = <18>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <30000000>;
+ hactive = <480>;
+ vactive = <800>;
+ hfront-porch = <12>;
+ hback-porch = <2>;
+ vfront-porch = <5>;
+ vback-porch = <3>;
+ hsync-len = <2>;
+ vsync-len = <2>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
+ };
+ };
+
+ apbx@80040000 {
+ lradc@80050000 {
+ fsl,lradc-touchscreen-wires = <4>;
+ status = "okay";
+ };
+
+ pwm: pwm@80064000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_pins_b>;
+ status = "okay";
+ };
+
+ i2c1: i2c@8005a000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+ };
+
+ usbphy1: usbphy@8007e000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ usb1: usb@80090000 {
+ vbus-supply = <&reg_usb1_vbus>;
+ pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_usb1_vbus: usb1_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio0 7 1>;
+ };
+ };
+
+ ahb@80080000 {
+ mac0: ethernet@800f0000 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_pins_a>;
+ phy-reset-gpios = <&gpio2 21 0>;
+ phy-reset-duration = <100>;
+ status = "okay";
+ };
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 3 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 5aa44e05c9f..880df2f13be 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -220,7 +220,19 @@
auart0: serial@8006a000 {
pinctrl-names = "default";
- pinctrl-0 = <&auart0_2pins_a>;
+ pinctrl-0 = <&auart0_pins_a>;
+ status = "okay";
+ };
+
+ auart1: serial@8006c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart1_pins_a>;
+ status = "okay";
+ };
+
+ auart2: serial@8006e000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart2_2pins_b>;
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 4c10a1968c0..195451bf770 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -334,6 +334,17 @@
fsl,pull-up = <0>;
};
+ auart2_2pins_b: auart2-2pins@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ 0x3080 /* MX28_PAD_AUART2_RX__AUART2_RX */
+ 0x3090 /* MX28_PAD_AUART2_TX__AUART2_TX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
auart3_pins_a: auart3@0 {
reg = <0>;
fsl,pinmux-ids = <
@@ -358,6 +369,28 @@
fsl,pull-up = <0>;
};
+ auart3_2pins_b: auart3-2pins@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
+ 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ auart4_2pins_a: auart4@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2181 /* MX28_PAD_SSP3_SCK__AUART4_TX */
+ 0x2191 /* MX28_PAD_SSP3_MOSI__AUART4_RX */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
mac0_pins_a: mac0@0 {
reg = <0>;
fsl,pinmux-ids = <
@@ -673,7 +706,7 @@
};
digctl@8001c000 {
- compatible = "fsl,imx28-digctl";
+ compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
reg = <0x8001c000 0x2000>;
interrupts = <89>;
status = "disabled";
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 03bd60deb52..eeb734e2570 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -56,9 +56,23 @@
};
};
+&omap4_pmx_wkup {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &twl6030_wkup_pins
+ >;
+
+ twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
+ pinctrl-single,pins = <
+ 0x14 0x2 /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */
+ >;
+ };
+};
+
&omap4_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
+ &twl6030_pins
&twl6040_pins
&mcpdm_pins
&mcbsp1_pins
@@ -66,6 +80,12 @@
&tpd12s015_pins
>;
+ twl6030_pins: pinmux_twl6030_pins {
+ pinctrl-single,pins = <
+ 0x15e 0x4118 /* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */
+ >;
+ };
+
twl6040_pins: pinmux_twl6040_pins {
pinctrl-single,pins = <
0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index a35d9cd5806..98505a2ef16 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -142,9 +142,23 @@
};
};
+&omap4_pmx_wkup {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &twl6030_wkup_pins
+ >;
+
+ twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
+ pinctrl-single,pins = <
+ 0x14 0x2 /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */
+ >;
+ };
+};
+
&omap4_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
+ &twl6030_pins
&twl6040_pins
&mcpdm_pins
&dmic_pins
@@ -179,6 +193,12 @@
>;
};
+ twl6030_pins: pinmux_twl6030_pins {
+ pinctrl-single,pins = <
+ 0x15e 0x4118 /* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */
+ >;
+ };
+
twl6040_pins: pinmux_twl6040_pins {
pinctrl-single,pins = <
0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 35a6536a10b..9e8083ff6cd 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -545,6 +545,7 @@
interrupts = <0 41 0x4>;
ti,hwmods = "timer5";
ti,timer-dsp;
+ ti,timer-pwm;
};
timer6: timer@4013a000 {
@@ -581,6 +582,7 @@
reg = <0x4803e000 0x80>;
interrupts = <0 45 0x4>;
ti,hwmods = "timer9";
+ ti,timer-pwm;
};
timer10: timer@48086000 {
@@ -588,6 +590,7 @@
reg = <0x48086000 0x80>;
interrupts = <0 46 0x4>;
ti,hwmods = "timer10";
+ ti,timer-pwm;
};
timer11: timer@48088000 {