Merge branch 'platforms' of git://git.linaro.org/people/rmk/linux-arm

Pull ARM platform updates from Russell King:
 "This covers platform stuff for platforms I have a direct interest in
  (iow, I have the hardware).  Essentially:
   - as we no longer support any other Acorn platforms other than RiscPC
     anymore, we can collect all that code into mach-rpc.
   - convert Acorn expansion card stuff to use IRQ allocation functions,
     and get rid of NO_IRQ from there.
   - cleanups to the ebsa110 platform to move some private stuff out of
     its header files.
   - large amount of SA11x0 updates:
   - conversion of private DMA implementation to DMA engine support
     (this actually gives us greater flexibility in drivers over the old
     API.)
   - re-worked ucb1x00 updates - convert to genirq, remove sa11x0
     dependencies, fix various minor issues
   - move platform specific sa11x0 framebuffer data into platform files
     in arch/arm instead of keeping this in the driver itself
   - update sa11x0 IrDA driver for DMA engine, and allow it to use DMA
     for SIR transmissions as well as FIR
   - rework sa1111 support for genirq, and irq allocation
   - fix sa1111 IRQ support so it works again
   - use sparse IRQ support

  After this, I have one more pull request remaining from my current
  set, which I think is going to be the most problematical as it
  generates 8 conflicts."

Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per
Russell.

* 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits)
  ARM: 7343/1: sa11x0: convert to sparse IRQ
  ARM: 7342/2: sa1100: prepare for sparse irq conversion
  ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq
  ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h
  ARM: sa11x0: remove unused DMA controller definitions
  ARM: sa11x0: remove old SoC private DMA driver
  USB: sa1111: add hcd .reset method
  USB: sa1111: add OHCI shutdown methods
  USB: sa1111: reorganize ohci-sa1111.c
  USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__)
  USB: sa1111: sparse and checkpatch cleanups
  ARM: sa11x0: don't static map sa1111
  ARM: sa1111: use dev_err() rather than printk()
  ARM: sa1111: cleanup sub-device registration and unregistration
  ARM: sa1111: only setup DMA for DMA capable devices
  ARM: sa1111: register sa1111 devices with dmabounce in bus notifier
  ARM: sa1111: move USB interface register definitions to ohci-sa1111.c
  ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c
  ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c
  ARM: sa1111: delete unused physical GPIO register definitions
  ...

4 files changed, 185 insertions, 195 deletions

diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 81a933eb090..3bb1d7589bd 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -35,9 +35,6 @@ config DMABOUNCE
 	bool
 	select ZONE_DMA
 
-config TIMER_ACORN
-	bool
-
 config SHARP_LOCOMO
 	bool
 
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index 6ea9b6f3607..69feafe7286 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -9,7 +9,6 @@ obj-$(CONFIG_PL330)		+= pl330.o
 obj-$(CONFIG_SA1111)		+= sa1111.o
 obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
 obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o
-obj-$(CONFIG_TIMER_ACORN)	+= time-acorn.o
 obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
 obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o
 obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 61691cdbdcf..9173d112ea0 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -16,6 +16,7 @@
  */
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
@@ -28,9 +29,8 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
 #include <asm/mach/irq.h>
+#include <asm/mach-types.h>
 #include <asm/sizes.h>
 
 #include <asm/hardware/sa1111.h>
@@ -86,8 +86,10 @@
 #define IRQ_S1_CD_VALID		(52)
 #define IRQ_S0_BVD1_STSCHG	(53)
 #define IRQ_S1_BVD1_STSCHG	(54)
+#define SA1111_IRQ_NR		(55)
 
-extern void __init sa1110_mb_enable(void);
+extern void sa1110_mb_enable(void);
+extern void sa1110_mb_disable(void);
 
 /*
  * We keep the following data for the overall SA1111.  Note that the
@@ -104,6 +106,7 @@ struct sa1111 {
 	int		irq_base;	/* base for cascaded on-chip IRQs */
 	spinlock_t	lock;
 	void __iomem	*base;
+	struct sa1111_platform_data *pdata;
 #ifdef CONFIG_PM
 	void		*saved_state;
 #endif
@@ -118,6 +121,7 @@ static struct sa1111 *g_sa1111;
 struct sa1111_dev_info {
 	unsigned long	offset;
 	unsigned long	skpcr_mask;
+	bool		dma;
 	unsigned int	devid;
 	unsigned int	irq[6];
 };
@@ -126,6 +130,7 @@ static struct sa1111_dev_info sa1111_devices[] = {
 	{
 		.offset		= SA1111_USB,
 		.skpcr_mask	= SKPCR_UCLKEN,
+		.dma		= true,
 		.devid		= SA1111_DEVID_USB,
 		.irq = {
 			IRQ_USBPWR,
@@ -139,6 +144,7 @@ static struct sa1111_dev_info sa1111_devices[] = {
 	{
 		.offset		= 0x0600,
 		.skpcr_mask	= SKPCR_I2SCLKEN | SKPCR_L3CLKEN,
+		.dma		= true,
 		.devid		= SA1111_DEVID_SAC,
 		.irq = {
 			AUDXMTDMADONEA,
@@ -155,7 +161,7 @@ static struct sa1111_dev_info sa1111_devices[] = {
 	{
 		.offset		= SA1111_KBD,
 		.skpcr_mask	= SKPCR_PTCLKEN,
-		.devid		= SA1111_DEVID_PS2,
+		.devid		= SA1111_DEVID_PS2_KBD,
 		.irq = {
 			IRQ_TPRXINT,
 			IRQ_TPTXINT
@@ -164,7 +170,7 @@ static struct sa1111_dev_info sa1111_devices[] = {
 	{
 		.offset		= SA1111_MSE,
 		.skpcr_mask	= SKPCR_PMCLKEN,
-		.devid		= SA1111_DEVID_PS2,
+		.devid		= SA1111_DEVID_PS2_MSE,
 		.irq = {
 			IRQ_MSRXINT,
 			IRQ_MSTXINT
@@ -434,16 +440,28 @@ static struct irq_chip sa1111_high_chip = {
 	.irq_set_wake	= sa1111_wake_highirq,
 };
 
-static void sa1111_setup_irq(struct sa1111 *sachip)
+static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
 {
 	void __iomem *irqbase = sachip->base + SA1111_INTC;
-	unsigned int irq;
+	unsigned i, irq;
+	int ret;
 
 	/*
 	 * We're guaranteed that this region hasn't been taken.
 	 */
 	request_mem_region(sachip->phys + SA1111_INTC, 512, "irq");
 
+	ret = irq_alloc_descs(-1, irq_base, SA1111_IRQ_NR, -1);
+	if (ret <= 0) {
+		dev_err(sachip->dev, "unable to allocate %u irqs: %d\n",
+			SA1111_IRQ_NR, ret);
+		if (ret == 0)
+			ret = -EINVAL;
+		return ret;
+	}
+
+	sachip->irq_base = ret;
+
 	/* disable all IRQs */
 	sa1111_writel(0, irqbase + SA1111_INTEN0);
 	sa1111_writel(0, irqbase + SA1111_INTEN1);
@@ -463,14 +481,16 @@ static void sa1111_setup_irq(struct sa1111 *sachip)
 	sa1111_writel(~0, irqbase + SA1111_INTSTATCLR0);
 	sa1111_writel(~0, irqbase + SA1111_INTSTATCLR1);
 
-	for (irq = IRQ_GPAIN0; irq <= SSPROR; irq++) {
+	for (i = IRQ_GPAIN0; i <= SSPROR; i++) {
+		irq = sachip->irq_base + i;
 		irq_set_chip_and_handler(irq, &sa1111_low_chip,
 					 handle_edge_irq);
 		irq_set_chip_data(irq, sachip);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 
-	for (irq = AUDXMTDMADONEA; irq <= IRQ_S1_BVD1_STSCHG; irq++) {
+	for (i = AUDXMTDMADONEA; i <= IRQ_S1_BVD1_STSCHG; i++) {
+		irq = sachip->irq_base + i;
 		irq_set_chip_and_handler(irq, &sa1111_high_chip,
 					 handle_edge_irq);
 		irq_set_chip_data(irq, sachip);
@@ -483,6 +503,11 @@ static void sa1111_setup_irq(struct sa1111 *sachip)
 	irq_set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
 	irq_set_handler_data(sachip->irq, sachip);
 	irq_set_chained_handler(sachip->irq, sa1111_irq_handler);
+
+	dev_info(sachip->dev, "Providing IRQ%u-%u\n",
+		sachip->irq_base, sachip->irq_base + SA1111_IRQ_NR - 1);
+
+	return 0;
 }
 
 /*
@@ -581,41 +606,10 @@ sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac,
 }
 #endif
 
-#ifdef CONFIG_DMABOUNCE
-/*
- * According to the "Intel StrongARM SA-1111 Microprocessor Companion
- * Chip Specification Update" (June 2000), erratum #7, there is a
- * significant bug in the SA1111 SDRAM shared memory controller.  If
- * an access to a region of memory above 1MB relative to the bank base,
- * it is important that address bit 10 _NOT_ be asserted. Depending
- * on the configuration of the RAM, bit 10 may correspond to one
- * of several different (processor-relative) address bits.
- *
- * This routine only identifies whether or not a given DMA address
- * is susceptible to the bug.
- *
- * This should only get called for sa1111_device types due to the
- * way we configure our device dma_masks.
- */
-static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size)
-{
-	/*
-	 * Section 4.6 of the "Intel StrongARM SA-1111 Development Module
-	 * User's Guide" mentions that jumpers R51 and R52 control the
-	 * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or
-	 * SDRAM bank 1 on Neponset). The default configuration selects
-	 * Assabet, so any address in bank 1 is necessarily invalid.
-	 */
-	return (machine_is_assabet() || machine_is_pfs168()) &&
-		(addr >= 0xc8000000 || (addr + size) >= 0xc8000000);
-}
-#endif
-
 static void sa1111_dev_release(struct device *_dev)
 {
 	struct sa1111_dev *dev = SA1111_DEV(_dev);
 
-	release_resource(&dev->res);
 	kfree(dev);
 }
 
@@ -624,67 +618,58 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 		      struct sa1111_dev_info *info)
 {
 	struct sa1111_dev *dev;
+	unsigned i;
 	int ret;
 
 	dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL);
 	if (!dev) {
 		ret = -ENOMEM;
-		goto out;
+		goto err_alloc;
 	}
 
+	device_initialize(&dev->dev);
 	dev_set_name(&dev->dev, "%4.4lx", info->offset);
 	dev->devid	 = info->devid;
 	dev->dev.parent  = sachip->dev;
 	dev->dev.bus     = &sa1111_bus_type;
 	dev->dev.release = sa1111_dev_release;
-	dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
 	dev->res.start   = sachip->phys + info->offset;
 	dev->res.end     = dev->res.start + 511;
 	dev->res.name    = dev_name(&dev->dev);
 	dev->res.flags   = IORESOURCE_MEM;
 	dev->mapbase     = sachip->base + info->offset;
 	dev->skpcr_mask  = info->skpcr_mask;
-	memmove(dev->irq, info->irq, sizeof(dev->irq));
-
-	ret = request_resource(parent, &dev->res);
-	if (ret) {
-		printk("SA1111: failed to allocate resource for %s\n",
-			dev->res.name);
-		dev_set_name(&dev->dev, NULL);
-		kfree(dev);
-		goto out;
-	}
-
 
-	ret = device_register(&dev->dev);
-	if (ret) {
-		release_resource(&dev->res);
-		kfree(dev);
-		goto out;
-	}
+	for (i = 0; i < ARRAY_SIZE(info->irq); i++)
+		dev->irq[i] = sachip->irq_base + info->irq[i];
 
-#ifdef CONFIG_DMABOUNCE
 	/*
-	 * If the parent device has a DMA mask associated with it,
-	 * propagate it down to the children.
+	 * If the parent device has a DMA mask associated with it, and
+	 * this child supports DMA, propagate it down to the children.
 	 */
-	if (sachip->dev->dma_mask) {
+	if (info->dma && sachip->dev->dma_mask) {
 		dev->dma_mask = *sachip->dev->dma_mask;
 		dev->dev.dma_mask = &dev->dma_mask;
+		dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
+	}
 
-		if (dev->dma_mask != 0xffffffffUL) {
-			ret = dmabounce_register_dev(&dev->dev, 1024, 4096,
-					sa1111_needs_bounce);
-			if (ret) {
-				dev_err(&dev->dev, "SA1111: Failed to register"
-					" with dmabounce\n");
-				device_unregister(&dev->dev);
-			}
-		}
+	ret = request_resource(parent, &dev->res);
+	if (ret) {
+		dev_err(sachip->dev, "failed to allocate resource for %s\n",
+			dev->res.name);
+		goto err_resource;
 	}
-#endif
 
-out:
+	ret = device_add(&dev->dev);
+	if (ret)
+		goto err_add;
+	return 0;
+
+ err_add:
+	release_resource(&dev->res);
+ err_resource:
+	put_device(&dev->dev);
+ err_alloc:
 	return ret;
 }
 
@@ -698,16 +683,21 @@ out:
  *	Returns:
  *	%-ENODEV	device not found.
  *	%-EBUSY		physical address already marked in-use.
+ *	%-EINVAL	no platform data passed
  *	%0		successful.
  */
 static int __devinit
 __sa1111_probe(struct device *me, struct resource *mem, int irq)
 {
+	struct sa1111_platform_data *pd = me->platform_data;
 	struct sa1111 *sachip;
 	unsigned long id;
 	unsigned int has_devs;
 	int i, ret = -ENODEV;
 
+	if (!pd)
+		return -EINVAL;
+
 	sachip = kzalloc(sizeof(struct sa1111), GFP_KERNEL);
 	if (!sachip)
 		return -ENOMEM;
@@ -727,6 +717,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
 	sachip->dev = me;
 	dev_set_drvdata(sachip->dev, sachip);
 
+	sachip->pdata = pd;
 	sachip->phys = mem->start;
 	sachip->irq = irq;
 
@@ -759,6 +750,16 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
 	 */
 	sa1111_wake(sachip);
 
+	/*
+	 * The interrupt controller must be initialised before any
+	 * other device to ensure that the interrupts are available.
+	 */
+	if (sachip->irq != NO_IRQ) {
+		ret = sa1111_setup_irq(sachip, pd->irq_base);
+		if (ret)
+			goto err_unmap;
+	}
+
 #ifdef CONFIG_ARCH_SA1100
 	{
 	unsigned int val;
@@ -789,24 +790,14 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
 	}
 #endif
 
-	/*
-	 * The interrupt controller must be initialised before any
-	 * other device to ensure that the interrupts are available.
-	 */
-	if (sachip->irq != NO_IRQ)
-		sa1111_setup_irq(sachip);
-
 	g_sa1111 = sachip;
 
 	has_devs = ~0;
-	if (machine_is_assabet() || machine_is_jornada720() ||
-	    machine_is_badge4())
-		has_devs &= ~(1 << 4);
-	else
-		has_devs &= ~(1 << 1);
+	if (pd)
+		has_devs &= ~pd->disable_devs;
 
 	for (i = 0; i < ARRAY_SIZE(sa1111_devices); i++)
-		if (has_devs & (1 << i))
+		if (sa1111_devices[i].devid & has_devs)
 			sa1111_init_one_child(sachip, mem, &sa1111_devices[i]);
 
 	return 0;
@@ -824,7 +815,10 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
 
 static int sa1111_remove_one(struct device *dev, void *data)
 {
-	device_unregister(dev);
+	struct sa1111_dev *sadev = SA1111_DEV(dev);
+	device_del(&sadev->dev);
+	release_resource(&sadev->res);
+	put_device(&sadev->dev);
 	return 0;
 }
 
@@ -846,6 +840,7 @@ static void __sa1111_remove(struct sa1111 *sachip)
 	if (sachip->irq != NO_IRQ) {
 		irq_set_chained_handler(sachip->irq, NULL);
 		irq_set_handler_data(sachip->irq, NULL);
+		irq_free_descs(sachip->irq_base, SA1111_IRQ_NR);
 
 		release_mem_region(sachip->phys + SA1111_INTC, 512);
 	}
@@ -904,6 +899,9 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
 	save->skpwm0   = sa1111_readl(base + SA1111_SKPWM0);
 	save->skpwm1   = sa1111_readl(base + SA1111_SKPWM1);
 
+	sa1111_writel(0, sachip->base + SA1111_SKPWM0);
+	sa1111_writel(0, sachip->base + SA1111_SKPWM1);
+
 	base = sachip->base + SA1111_INTC;
 	save->intpol0  = sa1111_readl(base + SA1111_INTPOL0);
 	save->intpol1  = sa1111_readl(base + SA1111_INTPOL1);
@@ -919,13 +917,15 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
 	 */
 	val = sa1111_readl(sachip->base + SA1111_SKCR);
 	sa1111_writel(val | SKCR_SLEEP, sachip->base + SA1111_SKCR);
-	sa1111_writel(0, sachip->base + SA1111_SKPWM0);
-	sa1111_writel(0, sachip->base + SA1111_SKPWM1);
 
 	clk_disable(sachip->clk);
 
 	spin_unlock_irqrestore(&sachip->lock, flags);
 
+#ifdef CONFIG_ARCH_SA1100
+	sa1110_mb_disable();
+#endif
+
 	return 0;
 }
 
@@ -966,6 +966,11 @@ static int sa1111_resume(struct platform_device *dev)
 	 */
 	sa1111_wake(sachip);
 
+#ifdef CONFIG_ARCH_SA1100
+	/* Enable the memory bus request/grant signals */
+	sa1110_mb_enable();
+#endif
+
 	/*
 	 * Only lock for write ops. Also, sa1111_wake must be called with
 	 * released spinlock!
@@ -1053,6 +1058,7 @@ static struct platform_driver sa1111_device_driver = {
 	.resume		= sa1111_resume,
 	.driver		= {
 		.name	= "sa1111",
+		.owner	= THIS_MODULE,
 	},
 };
 
@@ -1238,16 +1244,23 @@ EXPORT_SYMBOL(sa1111_set_sleep_io);
  *	sa1111_enable_device - enable an on-chip SA1111 function block
  *	@sadev: SA1111 function block device to enable
  */
-void sa1111_enable_device(struct sa1111_dev *sadev)
+int sa1111_enable_device(struct sa1111_dev *sadev)
 {
 	struct sa1111 *sachip = sa1111_chip_driver(sadev);
 	unsigned long flags;
 	unsigned int val;
+	int ret = 0;
 
-	spin_lock_irqsave(&sachip->lock, flags);
-	val = sa1111_readl(sachip->base + SA1111_SKPCR);
-	sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
-	spin_unlock_irqrestore(&sachip->lock, flags);
+	if (sachip->pdata && sachip->pdata->enable)
+		ret = sachip->pdata->enable(sachip->pdata->data, sadev->devid);
+
+	if (ret == 0) {
+		spin_lock_irqsave(&sachip->lock, flags);
+		val = sa1111_readl(sachip->base + SA1111_SKPCR);
+		sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
+		spin_unlock_irqrestore(&sachip->lock, flags);
+	}
+	return ret;
 }
 EXPORT_SYMBOL(sa1111_enable_device);
 
@@ -1265,6 +1278,9 @@ void sa1111_disable_device(struct sa1111_dev *sadev)
 	val = sa1111_readl(sachip->base + SA1111_SKPCR);
 	sa1111_writel(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
 	spin_unlock_irqrestore(&sachip->lock, flags);
+
+	if (sachip->pdata && sachip->pdata->disable)
+		sachip->pdata->disable(sachip->pdata->data, sadev->devid);
 }
 EXPORT_SYMBOL(sa1111_disable_device);
 
@@ -1279,7 +1295,7 @@ static int sa1111_match(struct device *_dev, struct device_driver *_drv)
 	struct sa1111_dev *dev = SA1111_DEV(_dev);
 	struct sa1111_driver *drv = SA1111_DRV(_drv);
 
-	return dev->devid == drv->devid;
+	return dev->devid & drv->devid;
 }
 
 static int sa1111_bus_suspend(struct device *dev, pm_message_t state)
@@ -1304,6 +1320,14 @@ static int sa1111_bus_resume(struct device *dev)
 	return ret;
 }
 
+static void sa1111_bus_shutdown(struct device *dev)
+{
+	struct sa1111_driver *drv = SA1111_DRV(dev->driver);
+
+	if (drv && drv->shutdown)
+		drv->shutdown(SA1111_DEV(dev));
+}
+
 static int sa1111_bus_probe(struct device *dev)
 {
 	struct sa1111_dev *sadev = SA1111_DEV(dev);
@@ -1333,6 +1357,7 @@ struct bus_type sa1111_bus_type = {
 	.remove		= sa1111_bus_remove,
 	.suspend	= sa1111_bus_suspend,
 	.resume		= sa1111_bus_resume,
+	.shutdown	= sa1111_bus_shutdown,
 };
 EXPORT_SYMBOL(sa1111_bus_type);
 
@@ -1349,9 +1374,70 @@ void sa1111_driver_unregister(struct sa1111_driver *driver)
 }
 EXPORT_SYMBOL(sa1111_driver_unregister);
 
+#ifdef CONFIG_DMABOUNCE
+/*
+ * According to the "Intel StrongARM SA-1111 Microprocessor Companion
+ * Chip Specification Update" (June 2000), erratum #7, there is a
+ * significant bug in the SA1111 SDRAM shared memory controller.  If
+ * an access to a region of memory above 1MB relative to the bank base,
+ * it is important that address bit 10 _NOT_ be asserted. Depending
+ * on the configuration of the RAM, bit 10 may correspond to one
+ * of several different (processor-relative) address bits.
+ *
+ * This routine only identifies whether or not a given DMA address
+ * is susceptible to the bug.
+ *
+ * This should only get called for sa1111_device types due to the
+ * way we configure our device dma_masks.
+ */
+static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size)
+{
+	/*
+	 * Section 4.6 of the "Intel StrongARM SA-1111 Development Module
+	 * User's Guide" mentions that jumpers R51 and R52 control the
+	 * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or
+	 * SDRAM bank 1 on Neponset). The default configuration selects
+	 * Assabet, so any address in bank 1 is necessarily invalid.
+	 */
+	return (machine_is_assabet() || machine_is_pfs168()) &&
+		(addr >= 0xc8000000 || (addr + size) >= 0xc8000000);
+}
+
+static int sa1111_notifier_call(struct notifier_block *n, unsigned long action,
+	void *data)
+{
+	struct sa1111_dev *dev = SA1111_DEV(data);
+
+	switch (action) {
+	case BUS_NOTIFY_ADD_DEVICE:
+		if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL) {
+			int ret = dmabounce_register_dev(&dev->dev, 1024, 4096,
+					sa1111_needs_bounce);
+			if (ret)
+				dev_err(&dev->dev, "failed to register with dmabounce: %d\n", ret);
+		}
+		break;
+
+	case BUS_NOTIFY_DEL_DEVICE:
+		if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL)
+			dmabounce_unregister_dev(&dev->dev);
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block sa1111_bus_notifier = {
+	.notifier_call = sa1111_notifier_call,
+};
+#endif
+
 static int __init sa1111_init(void)
 {
 	int ret = bus_register(&sa1111_bus_type);
+#ifdef CONFIG_DMABOUNCE
+	if (ret == 0)
+		bus_register_notifier(&sa1111_bus_type, &sa1111_bus_notifier);
+#endif
 	if (ret == 0)
 		platform_driver_register(&sa1111_device_driver);
 	return ret;
@@ -1360,6 +1446,9 @@ static int __init sa1111_init(void)
 static void __exit sa1111_exit(void)
 {
 	platform_driver_unregister(&sa1111_device_driver);
+#ifdef CONFIG_DMABOUNCE
+	bus_unregister_notifier(&sa1111_bus_type, &sa1111_bus_notifier);
+#endif
 	bus_unregister(&sa1111_bus_type);
 }
 
diff --git a/arch/arm/common/time-acorn.c b/arch/arm/common/time-acorn.c
deleted file mode 100644
index deeed561b16..00000000000
--- a/arch/arm/common/time-acorn.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- *  linux/arch/arm/common/time-acorn.c
- *
- *  Copyright (c) 1996-2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Changelog:
- *   24-Sep-1996	RMK	Created
- *   10-Oct-1996	RMK	Brought up to date with arch-sa110eval
- *   04-Dec-1997	RMK	Updated for new arch/arm/time.c
- *   13=Jun-2004	DS	Moved to arch/arm/common b/c shared w/CLPS7500
- */
-#include <linux/timex.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/hardware/ioc.h>
-
-#include <asm/mach/time.h>
-
-unsigned long ioc_timer_gettimeoffset(void)
-{
-	unsigned int count1, count2, status;
-	long offset;
-
-	ioc_writeb (0, IOC_T0LATCH);
-	barrier ();
-	count1 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8);
-	barrier ();
-	status = ioc_readb(IOC_IRQREQA);
-	barrier ();
-	ioc_writeb (0, IOC_T0LATCH);
-	barrier ();
-	count2 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8);
-
-	offset = count2;
-	if (count2 < count1) {
-		/*
-		 * We have not had an interrupt between reading count1
-		 * and count2.
-		 */
-		if (status & (1 << 5))
-			offset -= LATCH;
-	} else if (count2 > count1) {
-		/*
-		 * We have just had another interrupt between reading
-		 * count1 and count2.
-		 */
-		offset -= LATCH;
-	}
-
-	offset = (LATCH - offset) * (tick_nsec / 1000);
-	return (offset + LATCH/2) / LATCH;
-}
-
-void __init ioctime_init(void)
-{
-	ioc_writeb(LATCH & 255, IOC_T0LTCHL);
-	ioc_writeb(LATCH >> 8, IOC_T0LTCHH);
-	ioc_writeb(0, IOC_T0GO);
-}
-
-static irqreturn_t
-ioc_timer_interrupt(int irq, void *dev_id)
-{
-	timer_tick();
-	return IRQ_HANDLED;
-}
-
-static struct irqaction ioc_timer_irq = {
-	.name		= "timer",
-	.flags		= IRQF_DISABLED,
-	.handler	= ioc_timer_interrupt
-};
-
-/*
- * Set up timer interrupt.
- */
-static void __init ioc_timer_init(void)
-{
-	ioctime_init();
-	setup_irq(IRQ_TIMER, &ioc_timer_irq);
-}
-
-struct sys_timer ioc_timer = {
-	.init		= ioc_timer_init,
-	.offset		= ioc_timer_gettimeoffset,
-};
-