Merge tag 'integrator-pci-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/soc

From Linus Walleij:

This is a patch series that:
- Pulls the Integrator/AP PCI bridge driver into one file
- Adds full device tree support for it
- Keeps ATAG support around for the time being

* tag 'integrator-pci-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: integrator: basic PCIv3 device tree support
  ARM: integrator: move static ioremapping into PCIv3 driver
  ARM: integrator: move VGA base assignment
  ARM: integrator: remap PCIv3 base dynamically
  ARM: integrator: move V3 register definitions into driver
  ARM: integrator: move PCI base address grab to probe
  ARM: integrator: grab PCI error IRQ in probe()
  ARM: integrator: convert PCIv3 bridge to platform device
  ARM: integrator: merge PCIv3 driver into one file
  ARM: pci: create pci_common_init_dev()
  Documentation/devicetree: add a small note on PCI

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

2 files changed, 11 insertions, 192 deletions

diff --git a/arch/arm/include/asm/hardware/pci_v3.h b/arch/arm/include/asm/hardware/pci_v3.h
deleted file mode 100644
index 2811c7e2cfd..00000000000
--- a/arch/arm/include/asm/hardware/pci_v3.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- *  arch/arm/include/asm/hardware/pci_v3.h
- *
- *  Internal header file PCI V3 chip
- *
- *  Copyright (C) ARM Limited
- *  Copyright (C) 2000-2001 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef ASM_ARM_HARDWARE_PCI_V3_H
-#define ASM_ARM_HARDWARE_PCI_V3_H
-
-/* -------------------------------------------------------------------------------
- *  V3 Local Bus to PCI Bridge definitions
- * -------------------------------------------------------------------------------
- *  Registers (these are taken from page 129 of the EPC User's Manual Rev 1.04
- *  All V3 register names are prefaced by V3_ to avoid clashing with any other
- *  PCI definitions.  Their names match the user's manual.
- * 
- *  I'm assuming that I20 is disabled.
- * 
- */
-#define V3_PCI_VENDOR                   0x00000000
-#define V3_PCI_DEVICE                   0x00000002
-#define V3_PCI_CMD                      0x00000004
-#define V3_PCI_STAT                     0x00000006
-#define V3_PCI_CC_REV                   0x00000008
-#define V3_PCI_HDR_CFG                  0x0000000C
-#define V3_PCI_IO_BASE                  0x00000010
-#define V3_PCI_BASE0                    0x00000014
-#define V3_PCI_BASE1                    0x00000018
-#define V3_PCI_SUB_VENDOR               0x0000002C
-#define V3_PCI_SUB_ID                   0x0000002E
-#define V3_PCI_ROM                      0x00000030
-#define V3_PCI_BPARAM                   0x0000003C
-#define V3_PCI_MAP0                     0x00000040
-#define V3_PCI_MAP1                     0x00000044
-#define V3_PCI_INT_STAT                 0x00000048
-#define V3_PCI_INT_CFG                  0x0000004C 
-#define V3_LB_BASE0                     0x00000054
-#define V3_LB_BASE1                     0x00000058
-#define V3_LB_MAP0                      0x0000005E
-#define V3_LB_MAP1                      0x00000062
-#define V3_LB_BASE2                     0x00000064
-#define V3_LB_MAP2                      0x00000066
-#define V3_LB_SIZE                      0x00000068
-#define V3_LB_IO_BASE                   0x0000006E
-#define V3_FIFO_CFG                     0x00000070
-#define V3_FIFO_PRIORITY                0x00000072
-#define V3_FIFO_STAT                    0x00000074
-#define V3_LB_ISTAT                     0x00000076
-#define V3_LB_IMASK                     0x00000077
-#define V3_SYSTEM                       0x00000078
-#define V3_LB_CFG                       0x0000007A
-#define V3_PCI_CFG                      0x0000007C
-#define V3_DMA_PCI_ADR0                 0x00000080
-#define V3_DMA_PCI_ADR1                 0x00000090
-#define V3_DMA_LOCAL_ADR0               0x00000084
-#define V3_DMA_LOCAL_ADR1               0x00000094
-#define V3_DMA_LENGTH0                  0x00000088
-#define V3_DMA_LENGTH1                  0x00000098
-#define V3_DMA_CSR0                     0x0000008B
-#define V3_DMA_CSR1                     0x0000009B
-#define V3_DMA_CTLB_ADR0                0x0000008C
-#define V3_DMA_CTLB_ADR1                0x0000009C
-#define V3_DMA_DELAY                    0x000000E0
-#define V3_MAIL_DATA                    0x000000C0
-#define V3_PCI_MAIL_IEWR                0x000000D0
-#define V3_PCI_MAIL_IERD                0x000000D2
-#define V3_LB_MAIL_IEWR                 0x000000D4
-#define V3_LB_MAIL_IERD                 0x000000D6
-#define V3_MAIL_WR_STAT                 0x000000D8
-#define V3_MAIL_RD_STAT                 0x000000DA
-#define V3_QBA_MAP                      0x000000DC
-
-/*  PCI COMMAND REGISTER bits
- */
-#define V3_COMMAND_M_FBB_EN             (1 << 9)
-#define V3_COMMAND_M_SERR_EN            (1 << 8)
-#define V3_COMMAND_M_PAR_EN             (1 << 6)
-#define V3_COMMAND_M_MASTER_EN          (1 << 2)
-#define V3_COMMAND_M_MEM_EN             (1 << 1)
-#define V3_COMMAND_M_IO_EN              (1 << 0)
-
-/*  SYSTEM REGISTER bits
- */
-#define V3_SYSTEM_M_RST_OUT             (1 << 15)
-#define V3_SYSTEM_M_LOCK                (1 << 14)
-
-/*  PCI_CFG bits
- */
-#define V3_PCI_CFG_M_I2O_EN		(1 << 15)
-#define V3_PCI_CFG_M_IO_REG_DIS		(1 << 14)
-#define V3_PCI_CFG_M_IO_DIS		(1 << 13)
-#define V3_PCI_CFG_M_EN3V		(1 << 12)
-#define V3_PCI_CFG_M_RETRY_EN           (1 << 10)
-#define V3_PCI_CFG_M_AD_LOW1            (1 << 9)
-#define V3_PCI_CFG_M_AD_LOW0            (1 << 8)
-
-/*  PCI_BASE register bits (PCI -> Local Bus)
- */
-#define V3_PCI_BASE_M_ADR_BASE          0xFFF00000
-#define V3_PCI_BASE_M_ADR_BASEL         0x000FFF00
-#define V3_PCI_BASE_M_PREFETCH          (1 << 3)
-#define V3_PCI_BASE_M_TYPE              (3 << 1)
-#define V3_PCI_BASE_M_IO                (1 << 0)
-
-/*  PCI MAP register bits (PCI -> Local bus)
- */
-#define V3_PCI_MAP_M_MAP_ADR            0xFFF00000
-#define V3_PCI_MAP_M_RD_POST_INH        (1 << 15)
-#define V3_PCI_MAP_M_ROM_SIZE           (3 << 10)
-#define V3_PCI_MAP_M_SWAP               (3 << 8)
-#define V3_PCI_MAP_M_ADR_SIZE           0x000000F0
-#define V3_PCI_MAP_M_REG_EN             (1 << 1)
-#define V3_PCI_MAP_M_ENABLE             (1 << 0)
-
-/*
- *  LB_BASE0,1 register bits (Local bus -> PCI)
- */
-#define V3_LB_BASE_ADR_BASE		0xfff00000
-#define V3_LB_BASE_SWAP			(3 << 8)
-#define V3_LB_BASE_ADR_SIZE		(15 << 4)
-#define V3_LB_BASE_PREFETCH		(1 << 3)
-#define V3_LB_BASE_ENABLE		(1 << 0)
-
-#define V3_LB_BASE_ADR_SIZE_1MB		(0 << 4)
-#define V3_LB_BASE_ADR_SIZE_2MB		(1 << 4)
-#define V3_LB_BASE_ADR_SIZE_4MB		(2 << 4)
-#define V3_LB_BASE_ADR_SIZE_8MB		(3 << 4)
-#define V3_LB_BASE_ADR_SIZE_16MB	(4 << 4)
-#define V3_LB_BASE_ADR_SIZE_32MB	(5 << 4)
-#define V3_LB_BASE_ADR_SIZE_64MB	(6 << 4)
-#define V3_LB_BASE_ADR_SIZE_128MB	(7 << 4)
-#define V3_LB_BASE_ADR_SIZE_256MB	(8 << 4)
-#define V3_LB_BASE_ADR_SIZE_512MB	(9 << 4)
-#define V3_LB_BASE_ADR_SIZE_1GB		(10 << 4)
-#define V3_LB_BASE_ADR_SIZE_2GB		(11 << 4)
-
-#define v3_addr_to_lb_base(a)	((a) & V3_LB_BASE_ADR_BASE)
-
-/*
- *  LB_MAP0,1 register bits (Local bus -> PCI)
- */
-#define V3_LB_MAP_MAP_ADR		0xfff0
-#define V3_LB_MAP_TYPE			(7 << 1)
-#define V3_LB_MAP_AD_LOW_EN		(1 << 0)
-
-#define V3_LB_MAP_TYPE_IACK		(0 << 1)
-#define V3_LB_MAP_TYPE_IO		(1 << 1)
-#define V3_LB_MAP_TYPE_MEM		(3 << 1)
-#define V3_LB_MAP_TYPE_CONFIG		(5 << 1)
-#define V3_LB_MAP_TYPE_MEM_MULTIPLE	(6 << 1)
-
-#define v3_addr_to_lb_map(a)	(((a) >> 16) & V3_LB_MAP_MAP_ADR)
-
-/*
- *  LB_BASE2 register bits (Local bus -> PCI IO)
- */
-#define V3_LB_BASE2_ADR_BASE		0xff00
-#define V3_LB_BASE2_SWAP		(3 << 6)
-#define V3_LB_BASE2_ENABLE		(1 << 0)
-
-#define v3_addr_to_lb_base2(a)	(((a) >> 16) & V3_LB_BASE2_ADR_BASE)
-
-/*
- *  LB_MAP2 register bits (Local bus -> PCI IO)
- */
-#define V3_LB_MAP2_MAP_ADR		0xff00
-
-#define v3_addr_to_lb_map2(a)	(((a) >> 16) & V3_LB_MAP2_MAP_ADR)
-
-#endif
diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h
index 7d2c3c84380..a1c90d7feb0 100644
--- a/arch/arm/include/asm/mach/pci.h
+++ b/arch/arm/include/asm/mach/pci.h
@@ -16,6 +16,7 @@
 struct pci_sys_data;
 struct pci_ops;
 struct pci_bus;
+struct device;
 
 struct hw_pci {
 #ifdef CONFIG_PCI_DOMAINS
@@ -68,7 +69,16 @@ struct pci_sys_data {
 /*
  * Call this with your hw_pci struct to initialise the PCI system.
  */
-void pci_common_init(struct hw_pci *);
+void pci_common_init_dev(struct device *, struct hw_pci *);
+
+/*
+ * Compatibility wrapper for older platforms that do not care about
+ * passing the parent device.
+ */
+static inline void pci_common_init(struct hw_pci *hw)
+{
+	pci_common_init_dev(NULL, hw);
+}
 
 /*
  * Setup early fixed I/O mapping.
@@ -96,9 +106,4 @@ extern struct pci_ops via82c505_ops;
 extern int via82c505_setup(int nr, struct pci_sys_data *);
 extern void via82c505_init(void *sysdata);
 
-extern struct pci_ops pci_v3_ops;
-extern int pci_v3_setup(int nr, struct pci_sys_data *);
-extern void pci_v3_preinit(void);
-extern void pci_v3_postinit(void);
-
 #endif /* __ASM_MACH_PCI_H */