Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits)
  [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices
  [ARM] pxafb: cleanup of the timing checking code
  [ARM] pxafb: cleanup of the color format manipulation code
  [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3
  [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching
  [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset
  [ARM] pxafb: allow video memory size to be configurable
  [ARM] pxa: add document on the MFP design and how to use it
  [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant
  [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad)
  [ARM] pxa: Update eseries defconfig
  [ARM] 5352/1: add w90p910-plat config file
  [ARM] s3c: S3C options should depend on PLAT_S3C
  [ARM] mv78xx0: implement GPIO and GPIO interrupt support
  [ARM] Kirkwood: implement GPIO and GPIO interrupt support
  [ARM] Orion: share GPIO IRQ handling code
  [ARM] Orion: share GPIO handling code
  [ARM] s3c: define __io using the typesafe version
  [ARM] S3C64XX: Ensure CPU_V6 is selected
  ...

1 files changed, 30 insertions, 6 deletions

diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
index 391b566c457..d96405b7d57 100644
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -40,8 +40,10 @@
 #include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 #include <mach/at91_shdwc.h>
 
+#include "sam9_smc.h"
 #include "generic.h"
 
 
@@ -134,13 +136,35 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PA22,
 	.enable_pin	= AT91_PIN_PD15,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
-	.bus_width_16	= 1,
-#else
-	.bus_width_16	= 0,
-#endif
 };
 
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 3,
+	.nrd_pulse		= 3,
+	.ncs_write_pulse	= 3,
+	.nwe_pulse		= 3,
+
+	.read_cycle		= 5,
+	.write_cycle		= 5,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+	.tdf_cycles		= 2,
+};
+
+static void __init ek_add_device_nand(void)
+{
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &ek_nand_smc_config);
+
+	at91_add_device_nand(&ek_nand_data);
+}
+
+
 /*
  * GPIO Buttons
  */
@@ -206,7 +230,7 @@ static void __init ek_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* NAND */
-	at91_add_device_nand(&ek_nand_data);
+	ek_add_device_nand();
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
 	/* Push Buttons */