ARM: at91: add pinctrl support

This is also include the gpio controller as the IP share both.
Each soc will have to describe the SoC limitation and pin configuration via
DT.

This will allow to do not need to touch the C code when adding new SoC if the
IP version is supported.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 5 insertions, 160 deletions

diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index a34f0ed291c..c5d7e1e9d75 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -23,8 +23,6 @@
 #include <linux/io.h>
 #include <linux/irqdomain.h>
 #include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_gpio.h>
 
 #include <asm/mach/irq.h>
 
@@ -717,80 +715,6 @@ postcore_initcall(at91_gpio_debugfs_init);
  */
 static struct lock_class_key gpio_lock_class;
 
-#if defined(CONFIG_OF)
-static int at91_gpio_irq_map(struct irq_domain *h, unsigned int virq,
-							irq_hw_number_t hw)
-{
-	struct at91_gpio_chip	*at91_gpio = h->host_data;
-
-	irq_set_lockdep_class(virq, &gpio_lock_class);
-
-	/*
-	 * Can use the "simple" and not "edge" handler since it's
-	 * shorter, and the AIC handles interrupts sanely.
-	 */
-	irq_set_chip_and_handler(virq, &gpio_irqchip,
-				 handle_simple_irq);
-	set_irq_flags(virq, IRQF_VALID);
-	irq_set_chip_data(virq, at91_gpio);
-
-	return 0;
-}
-
-static struct irq_domain_ops at91_gpio_ops = {
-	.map	= at91_gpio_irq_map,
-	.xlate	= irq_domain_xlate_twocell,
-};
-
-int __init at91_gpio_of_irq_setup(struct device_node *node,
-				     struct device_node *parent)
-{
-	struct at91_gpio_chip	*prev = NULL;
-	int			alias_idx = of_alias_get_id(node, "gpio");
-	struct at91_gpio_chip	*at91_gpio = &gpio_chip[alias_idx];
-
-	/* Setup proper .irq_set_type function */
-	if (has_pio3())
-		gpio_irqchip.irq_set_type = alt_gpio_irq_type;
-	else
-		gpio_irqchip.irq_set_type = gpio_irq_type;
-
-	/* Disable irqs of this PIO controller */
-	__raw_writel(~0, at91_gpio->regbase + PIO_IDR);
-
-	/* Setup irq domain */
-	at91_gpio->domain = irq_domain_add_linear(node, at91_gpio->chip.ngpio,
-						&at91_gpio_ops, at91_gpio);
-	if (!at91_gpio->domain)
-		panic("at91_gpio.%d: couldn't allocate irq domain (DT).\n",
-			at91_gpio->pioc_idx);
-
-	/* Setup chained handler */
-	if (at91_gpio->pioc_idx)
-		prev = &gpio_chip[at91_gpio->pioc_idx - 1];
-
-	/* The toplevel handler handles one bank of GPIOs, except
-	 * on some SoC it can handles up to three...
-	 * We only set up the handler for the first of the list.
-	 */
-	if (prev && prev->next == at91_gpio)
-		return 0;
-
-	at91_gpio->pioc_virq = irq_create_mapping(irq_find_host(parent),
-							at91_gpio->pioc_hwirq);
-	irq_set_chip_data(at91_gpio->pioc_virq, at91_gpio);
-	irq_set_chained_handler(at91_gpio->pioc_virq, gpio_irq_handler);
-
-	return 0;
-}
-#else
-int __init at91_gpio_of_irq_setup(struct device_node *node,
-				     struct device_node *parent)
-{
-	return -EINVAL;
-}
-#endif
-
 /*
  * irqdomain initialization: pile up irqdomains on top of AIC range
  */
@@ -989,85 +913,6 @@ err:
 	return -EINVAL;
 }
 
-#ifdef CONFIG_OF_GPIO
-static void __init of_at91_gpio_init_one(struct device_node *np)
-{
-	int alias_idx;
-	struct at91_gpio_chip *at91_gpio;
-	uint32_t ngpio;
-
-	if (!np)
-		return;
-
-	alias_idx = of_alias_get_id(np, "gpio");
-	if (alias_idx >= MAX_GPIO_BANKS) {
-		pr_err("at91_gpio, failed alias idx(%d) > MAX_GPIO_BANKS(%d), ignoring.\n",
-						alias_idx, MAX_GPIO_BANKS);
-		return;
-	}
-
-	at91_gpio = &gpio_chip[alias_idx];
-	at91_gpio->chip.base = alias_idx * MAX_NB_GPIO_PER_BANK;
-
-	at91_gpio->regbase = of_iomap(np, 0);
-	if (!at91_gpio->regbase) {
-		pr_err("at91_gpio.%d, failed to map registers, ignoring.\n",
-								alias_idx);
-		return;
-	}
-
-	/* Get the interrupts property */
-	if (of_property_read_u32(np, "interrupts", &at91_gpio->pioc_hwirq)) {
-		pr_err("at91_gpio.%d, failed to get interrupts property, ignoring.\n",
-								alias_idx);
-		goto ioremap_err;
-	}
-
-	/* Get capabilities from compatibility property */
-	if (of_device_is_compatible(np, "atmel,at91sam9x5-gpio"))
-		at91_gpio_caps |= AT91_GPIO_CAP_PIO3;
-
-	if (!of_property_read_u32(np, "#gpio-lines", &ngpio)) {
-		if (ngpio >= MAX_NB_GPIO_PER_BANK)
-			pr_err("at91_gpio.%d, gpio-nb >= %d failback to %d\n",
-			       alias_idx, MAX_NB_GPIO_PER_BANK, MAX_NB_GPIO_PER_BANK);
-		else
-			at91_gpio->chip.ngpio = ngpio;
-	}
-
-	/* Setup clock */
-	if (at91_gpio_setup_clk(alias_idx))
-		goto ioremap_err;
-
-	at91_gpio->chip.of_node = np;
-	gpio_banks = max(gpio_banks, alias_idx + 1);
-	at91_gpio->pioc_idx = alias_idx;
-	return;
-
-ioremap_err:
-	iounmap(at91_gpio->regbase);
-}
-
-static int __init of_at91_gpio_init(void)
-{
-	struct device_node *np = NULL;
-
-	/*
-	 * This isn't ideal, but it gets things hooked up until this
-	 * driver is converted into a platform_device
-	 */
-	for_each_compatible_node(np, NULL, "atmel,at91rm9200-gpio")
-		of_at91_gpio_init_one(np);
-
-	return gpio_banks > 0 ? 0 : -EINVAL;
-}
-#else
-static int __init of_at91_gpio_init(void)
-{
-	return -EINVAL;
-}
-#endif
-
 static void __init at91_gpio_init_one(int idx, u32 regbase, int pioc_hwirq)
 {
 	struct at91_gpio_chip *at91_gpio = &gpio_chip[idx];
@@ -1102,11 +947,11 @@ void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
 
 	BUG_ON(nr_banks > MAX_GPIO_BANKS);
 
-	if (of_at91_gpio_init() < 0) {
-		/* No GPIO controller found in device tree */
-		for (i = 0; i < nr_banks; i++)
-			at91_gpio_init_one(i, data[i].regbase, data[i].id);
-	}
+	if (of_have_populated_dt())
+		return;
+
+	for (i = 0; i < nr_banks; i++)
+		at91_gpio_init_one(i, data[i].regbase, data[i].id);
 
 	for (i = 0; i < gpio_banks; i++) {
 		at91_gpio = &gpio_chip[i];