Merge branch 'master' into for-next

Sync with Linus' tree to be able to apply fixes on top of newer things
in tree (efi-stub).

Signed-off-by: Jiri Kosina <jkosina@suse.cz>

41 files changed, 304 insertions, 179 deletions

diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 3b0a9538093..90aab2d5a07 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-obj-y		:= irq.o gpio.o setup.o
+obj-y		:= irq.o gpio.o setup.o sysirq_mask.o
 obj-m		:=
 obj-n		:=
 obj-		:=
@@ -98,7 +98,6 @@ obj-y				+= leds.o
 # Power Management
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_AT91_SLOW_CLOCK)	+= pm_slowclock.o
-obj-$(CONFIG_CPU_IDLE)	+= cpuidle.o
 
 ifeq ($(CONFIG_PM_DEBUG),y)
 CFLAGS_pm.o += -DDEBUG
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 4aad93d54d6..25805f2f601 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -27,6 +27,7 @@
 #include "generic.h"
 #include "clock.h"
 #include "sam9_smc.h"
+#include "pm.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -327,6 +328,7 @@ static void __init at91rm9200_ioremap_registers(void)
 {
 	at91rm9200_ioremap_st(AT91RM9200_BASE_ST);
 	at91_ioremap_ramc(0, AT91RM9200_BASE_MC, 256);
+	at91_pm_set_standby(at91rm9200_standby);
 }
 
 static void __init at91rm9200_initialize(void)
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 180b3024bec..bc7b363a308 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -93,7 +93,7 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction at91rm9200_timer_irq = {
 	.name		= "at91_tick",
-	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= at91rm9200_timer_interrupt,
 	.irq		= NR_IRQS_LEGACY + AT91_ID_SYS,
 };
@@ -174,7 +174,6 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
 static struct clock_event_device clkevt = {
 	.name		= "at91_tick",
 	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
 	.rating		= 150,
 	.set_next_event	= clkevt32k_next_event,
 	.set_mode	= clkevt32k_mode,
@@ -265,11 +264,9 @@ void __init at91rm9200_timer_init(void)
 	at91_st_write(AT91_ST_RTMR, 1);
 
 	/* Setup timer clockevent, with minimum of two ticks (important!!) */
-	clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift);
-	clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt);
-	clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1;
 	clkevt.cpumask = cpumask_of(0);
-	clockevents_register_device(&clkevt);
+	clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK,
+					2, AT91_ST_ALMV);
 
 	/* register clocksource */
 	clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 5de6074b4f4..d6a1fa85371 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -28,6 +28,7 @@
 #include "generic.h"
 #include "clock.h"
 #include "sam9_smc.h"
+#include "pm.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -342,6 +343,7 @@ static void __init at91sam9260_ioremap_registers(void)
 	at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC);
 	at91_ioremap_matrix(AT91SAM9260_BASE_MATRIX);
+	at91_pm_set_standby(at91sam9_sdram_standby);
 }
 
 static void __init at91sam9260_initialize(void)
@@ -349,6 +351,8 @@ static void __init at91sam9260_initialize(void)
 	arm_pm_idle = at91sam9_idle;
 	arm_pm_restart = at91sam9_alt_restart;
 
+	at91_sysirq_mask_rtt(AT91SAM9260_BASE_RTT);
+
 	/* Register GPIO subsystem */
 	at91_gpio_init(at91sam9260_gpio, 3);
 }
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 0e0793241ab..23ba1d8a153 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -27,6 +27,7 @@
 #include "generic.h"
 #include "clock.h"
 #include "sam9_smc.h"
+#include "pm.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -284,6 +285,7 @@ static void __init at91sam9261_ioremap_registers(void)
 	at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC);
 	at91_ioremap_matrix(AT91SAM9261_BASE_MATRIX);
+	at91_pm_set_standby(at91sam9_sdram_standby);
 }
 
 static void __init at91sam9261_initialize(void)
@@ -291,6 +293,8 @@ static void __init at91sam9261_initialize(void)
 	arm_pm_idle = at91sam9_idle;
 	arm_pm_restart = at91sam9_alt_restart;
 
+	at91_sysirq_mask_rtt(AT91SAM9261_BASE_RTT);
+
 	/* Register GPIO subsystem */
 	at91_gpio_init(at91sam9261_gpio, 3);
 }
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 629ea5fc95c..b2a34740146 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -465,7 +465,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 
 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
 static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_info lcdc_data;
+static struct atmel_lcdfb_pdata lcdc_data;
 
 static struct resource lcdc_resources[] = {
 	[0] = {
@@ -498,7 +498,7 @@ static struct platform_device at91_lcdc_device = {
 	.num_resources	= ARRAY_SIZE(lcdc_resources),
 };
 
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
 {
 	if (!data) {
 		return;
@@ -559,7 +559,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
 	platform_device_register(&at91_lcdc_device);
 }
 #else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 6ce7d185089..7eccb0fc57b 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -26,6 +26,7 @@
 #include "generic.h"
 #include "clock.h"
 #include "sam9_smc.h"
+#include "pm.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -321,6 +322,7 @@ static void __init at91sam9263_ioremap_registers(void)
 	at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0);
 	at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1);
 	at91_ioremap_matrix(AT91SAM9263_BASE_MATRIX);
+	at91_pm_set_standby(at91sam9_sdram_standby);
 }
 
 static void __init at91sam9263_initialize(void)
@@ -328,6 +330,9 @@ static void __init at91sam9263_initialize(void)
 	arm_pm_idle = at91sam9_idle;
 	arm_pm_restart = at91sam9_alt_restart;
 
+	at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT0);
+	at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT1);
+
 	/* Register GPIO subsystem */
 	at91_gpio_init(at91sam9263_gpio, 5);
 }
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 858c8aac2da..4aeadddbc18 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -832,7 +832,7 @@ void __init at91_add_device_can(struct at91_can_data *data) {}
 
 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
 static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_info lcdc_data;
+static struct atmel_lcdfb_pdata lcdc_data;
 
 static struct resource lcdc_resources[] = {
 	[0] = {
@@ -859,7 +859,7 @@ static struct platform_device at91_lcdc_device = {
 	.num_resources	= ARRAY_SIZE(lcdc_resources),
 };
 
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
 {
 	if (!data)
 		return;
@@ -891,7 +891,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
 	platform_device_register(&at91_lcdc_device);
 }
 #else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 3a4bc2e1a65..bb392320a0d 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -171,7 +171,7 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
 
 static struct irqaction at91sam926x_pit_irq = {
 	.name		= "at91_tick",
-	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.flags		= IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
 	.handler	= at91sam926x_pit_interrupt,
 	.irq		= NR_IRQS_LEGACY + AT91_ID_SYS,
 };
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 474ee04d24b..9405aa08b10 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -26,6 +26,7 @@
 #include "generic.h"
 #include "clock.h"
 #include "sam9_smc.h"
+#include "pm.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -370,6 +371,7 @@ static void __init at91sam9g45_ioremap_registers(void)
 	at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC);
 	at91_ioremap_matrix(AT91SAM9G45_BASE_MATRIX);
+	at91_pm_set_standby(at91_ddr_standby);
 }
 
 static void __init at91sam9g45_initialize(void)
@@ -377,6 +379,9 @@ static void __init at91sam9g45_initialize(void)
 	arm_pm_idle = at91sam9_idle;
 	arm_pm_restart = at91sam9g45_restart;
 
+	at91_sysirq_mask_rtc(AT91SAM9G45_BASE_RTC);
+	at91_sysirq_mask_rtt(AT91SAM9G45_BASE_RTT);
+
 	/* Register GPIO subsystem */
 	at91_gpio_init(at91sam9g45_gpio, 5);
 }
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index acb703e1333..cb36fa872d3 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -965,7 +965,7 @@ void __init at91_add_device_isi(struct isi_platform_data *data,
 
 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
 static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_info lcdc_data;
+static struct atmel_lcdfb_pdata lcdc_data;
 
 static struct resource lcdc_resources[] = {
 	[0] = {
@@ -991,7 +991,7 @@ static struct platform_device at91_lcdc_device = {
 	.num_resources	= ARRAY_SIZE(lcdc_resources),
 };
 
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
 {
 	if (!data)
 		return;
@@ -1037,7 +1037,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
 	platform_device_register(&at91_lcdc_device);
 }
 #else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9g45_reset.S b/arch/arm/mach-at91/at91sam9g45_reset.S
index 721a1a34dd1..c40c1e2ef80 100644
--- a/arch/arm/mach-at91/at91sam9g45_reset.S
+++ b/arch/arm/mach-at91/at91sam9g45_reset.S
@@ -16,11 +16,17 @@
 #include "at91_rstc.h"
 			.arm
 
+/*
+ * at91_ramc_base is an array void*
+ * init at NULL if only one DDR controler is present in or DT
+ */
 			.globl	at91sam9g45_restart
 
 at91sam9g45_restart:
 			ldr	r5, =at91_ramc_base		@ preload constants
 			ldr	r0, [r5]
+			ldr	r5, [r5, #4]			@ ddr1
+			cmp	r5, #0
 			ldr	r4, =at91_rstc_base
 			ldr	r1, [r4]
 
@@ -30,6 +36,8 @@ at91sam9g45_restart:
 
 			.balign	32				@ align to cache line
 
+			strne	r2, [r5, #AT91_DDRSDRC_RTR]	@ disable DDR1 access
+			strne	r3, [r5, #AT91_DDRSDRC_LPR]	@ power down DDR1
 			str	r2, [r0, #AT91_DDRSDRC_RTR]	@ disable DDR0 access
 			str	r3, [r0, #AT91_DDRSDRC_LPR]	@ power down DDR0
 			str	r4, [r1, #AT91_RSTC_CR]		@ reset processor
diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c
index c7d670d1180..388ec3aec4b 100644
--- a/arch/arm/mach-at91/at91sam9n12.c
+++ b/arch/arm/mach-at91/at91sam9n12.c
@@ -169,6 +169,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb_clk),
 	CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc_clk),
+	CLKDEV_CON_DEV_ID(NULL, "f0010000.ssc", &ssc_clk),
 	CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk),
 	CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk),
 	CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk),
@@ -223,7 +224,13 @@ static void __init at91sam9n12_map_io(void)
 	at91_init_sram(0, AT91SAM9N12_SRAM_BASE, AT91SAM9N12_SRAM_SIZE);
 }
 
+static void __init at91sam9n12_initialize(void)
+{
+	at91_sysirq_mask_rtc(AT91SAM9N12_BASE_RTC);
+}
+
 AT91_SOC_START(at91sam9n12)
 	.map_io = at91sam9n12_map_io,
 	.register_clocks = at91sam9n12_register_clocks,
+	.init = at91sam9n12_initialize,
 AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index d4ec0d9a987..0750ffb7e6b 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -27,6 +27,7 @@
 #include "generic.h"
 #include "clock.h"
 #include "sam9_smc.h"
+#include "pm.h"
 
 /* --------------------------------------------------------------------
  *  Clocks
@@ -287,6 +288,7 @@ static void __init at91sam9rl_ioremap_registers(void)
 	at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
 	at91_ioremap_matrix(AT91SAM9RL_BASE_MATRIX);
+	at91_pm_set_standby(at91sam9_sdram_standby);
 }
 
 static void __init at91sam9rl_initialize(void)
@@ -294,6 +296,9 @@ static void __init at91sam9rl_initialize(void)
 	arm_pm_idle = at91sam9_idle;
 	arm_pm_restart = at91sam9_alt_restart;
 
+	at91_sysirq_mask_rtc(AT91SAM9RL_BASE_RTC);
+	at91_sysirq_mask_rtt(AT91SAM9RL_BASE_RTT);
+
 	/* Register GPIO subsystem */
 	at91_gpio_init(at91sam9rl_gpio, 4);
 }
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 352468f265a..a698bdab2cc 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -498,7 +498,7 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
 
 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
 static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_info lcdc_data;
+static struct atmel_lcdfb_pdata lcdc_data;
 
 static struct resource lcdc_resources[] = {
 	[0] = {
@@ -525,7 +525,7 @@ static struct platform_device at91_lcdc_device = {
 	.num_resources	= ARRAY_SIZE(lcdc_resources),
 };
 
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
 {
 	if (!data) {
 		return;
@@ -557,7 +557,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
 	platform_device_register(&at91_lcdc_device);
 }
 #else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
index 916e5a14291..e8a2e075a1b 100644
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -322,6 +322,11 @@ static void __init at91sam9x5_map_io(void)
 	at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE);
 }
 
+static void __init at91sam9x5_initialize(void)
+{
+	at91_sysirq_mask_rtc(AT91SAM9X5_BASE_RTC);
+}
+
 /* --------------------------------------------------------------------
  *  Interrupt initialization
  * -------------------------------------------------------------------- */
@@ -329,4 +334,5 @@ static void __init at91sam9x5_map_io(void)
 AT91_SOC_START(at91sam9x5)
 	.map_io = at91sam9x5_map_io,
 	.register_clocks = at91sam9x5_register_clocks,
+	.init = at91sam9x5_initialize,
 AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c
index 2919eba41ff..c0e637adf65 100644
--- a/arch/arm/mach-at91/at91x40_time.c
+++ b/arch/arm/mach-at91/at91x40_time.c
@@ -57,7 +57,7 @@ static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction at91x40_timer_irq = {
 	.name		= "at91_tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.flags		= IRQF_TIMER,
 	.handler	= at91x40_timer_interrupt
 };
 
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index ade948b8266..112e867c4ab 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -112,7 +112,7 @@ static struct spi_board_info cam60_spi_devices[] __initdata = {
 /*
  * MACB Ethernet device
  */
-static struct __initdata macb_platform_data cam60_macb_data = {
+static struct macb_platform_data cam60_macb_data __initdata = {
 	.phy_irq_pin	= AT91_PIN_PB5,
 	.is_rmii	= 0,
 };
diff --git a/arch/arm/mach-at91/board-dt-rm9200.c b/arch/arm/mach-at91/board-dt-rm9200.c
index 3fcb6623a33..3a185faee79 100644
--- a/arch/arm/mach-at91/board-dt-rm9200.c
+++ b/arch/arm/mach-at91/board-dt-rm9200.c
@@ -14,7 +14,6 @@
 #include <linux/gpio.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
-#include <linux/of_platform.h>
 
 #include <asm/setup.h>
 #include <asm/irq.h>
@@ -36,11 +35,6 @@ static void __init at91rm9200_dt_init_irq(void)
 	of_irq_init(irq_of_match);
 }
 
-static void __init at91rm9200_dt_device_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
 static const char *at91rm9200_dt_board_compat[] __initdata = {
 	"atmel,at91rm9200",
 	NULL
@@ -52,6 +46,5 @@ DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)")
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= at91rm9200_dt_initialize,
 	.init_irq	= at91rm9200_dt_init_irq,
-	.init_machine	= at91rm9200_dt_device_init,
 	.dt_compat	= at91rm9200_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-dt-sam9.c b/arch/arm/mach-at91/board-dt-sam9.c
index 8db30132abe..3dab868b02f 100644
--- a/arch/arm/mach-at91/board-dt-sam9.c
+++ b/arch/arm/mach-at91/board-dt-sam9.c
@@ -13,7 +13,6 @@
 #include <linux/gpio.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
-#include <linux/of_platform.h>
 
 #include <asm/setup.h>
 #include <asm/irq.h>
@@ -37,11 +36,6 @@ static void __init at91_dt_init_irq(void)
 	of_irq_init(irq_of_match);
 }
 
-static void __init at91_dt_device_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
 static const char *at91_dt_board_compat[] __initdata = {
 	"atmel,at91sam9",
 	NULL
@@ -54,6 +48,5 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= at91_dt_initialize,
 	.init_irq	= at91_dt_init_irq,
-	.init_machine	= at91_dt_device_init,
 	.dt_compat	= at91_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c
index ad95f6a23a2..bf00d15d954 100644
--- a/arch/arm/mach-at91/board-dt-sama5.c
+++ b/arch/arm/mach-at91/board-dt-sama5.c
@@ -42,20 +42,15 @@ static int ksz9021rn_phy_fixup(struct phy_device *phy)
 {
 	int value;
 
-#define GMII_RCCPSR	260
-#define GMII_RRDPSR	261
-#define GMII_ERCR	11
-#define GMII_ERDWR	12
-
 	/* Set delay values */
-	value = GMII_RCCPSR | 0x8000;
-	phy_write(phy, GMII_ERCR, value);
+	value = MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW | 0x8000;
+	phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value);
 	value = 0xF2F4;
-	phy_write(phy, GMII_ERDWR, value);
-	value = GMII_RRDPSR | 0x8000;
-	phy_write(phy, GMII_ERCR, value);
+	phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value);
+	value = MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW | 0x8000;
+	phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value);
 	value = 0x2222;
-	phy_write(phy, GMII_ERDWR, value);
+	phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value);
 
 	return 0;
 }
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 0b153c87521..f4f8735315d 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -28,7 +28,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/at73c213.h>
 #include <linux/clk.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index d3437624ca4..473546b9408 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -389,7 +389,7 @@ static struct fb_monspecs at91fb_default_stn_monspecs = {
 					| ATMEL_LCDC_IFWIDTH_4 \
 					| ATMEL_LCDC_SCANMOD_SINGLE)
 
-static void at91_lcdc_stn_power_control(int on)
+static void at91_lcdc_stn_power_control(struct atmel_lcdfb_pdata *pdata, int on)
 {
 	/* backlight */
 	if (on) {	/* power up */
@@ -401,7 +401,7 @@ static void at91_lcdc_stn_power_control(int on)
 	}
 }
 
-static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
 	.default_bpp			= 1,
 	.default_dmacon			= ATMEL_LCDC_DMAEN,
 	.default_lcdcon2		= AT91SAM9261_DEFAULT_STN_LCDCON2,
@@ -445,7 +445,7 @@ static struct fb_monspecs at91fb_default_tft_monspecs = {
 					| ATMEL_LCDC_DISTYPE_TFT    \
 					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
 
-static void at91_lcdc_tft_power_control(int on)
+static void at91_lcdc_tft_power_control(struct atmel_lcdfb_pdata *pdata, int on)
 {
 	if (on)
 		at91_set_gpio_value(AT91_PIN_PA12, 0);	/* power up */
@@ -453,7 +453,7 @@ static void at91_lcdc_tft_power_control(int on)
 		at91_set_gpio_value(AT91_PIN_PA12, 1);	/* power down */
 }
 
-static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
 	.lcdcon_is_backlight		= true,
 	.default_bpp			= 16,
 	.default_dmacon			= ATMEL_LCDC_DMAEN,
@@ -465,7 +465,7 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 #endif
 
 #else
-static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 3284df05df1..2f931915c80 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -27,7 +27,7 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
-#include <linux/i2c/at24.h>
+#include <linux/platform_data/at24.h>
 #include <linux/fb.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
@@ -275,13 +275,13 @@ static struct fb_monspecs at91fb_default_monspecs = {
 					| ATMEL_LCDC_DISTYPE_TFT \
 					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
 
-static void at91_lcdc_power_control(int on)
+static void at91_lcdc_power_control(struct atmel_lcdfb_pdata *pdata, int on)
 {
 	at91_set_gpio_value(AT91_PIN_PA30, on);
 }
 
 /* Driver datas */
-static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
 	.lcdcon_is_backlight		= true,
 	.default_bpp			= 16,
 	.default_dmacon			= ATMEL_LCDC_DMAEN,
@@ -292,7 +292,7 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 };
 
 #else
-static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 2a94896a137..ef39078c8ce 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -284,7 +284,7 @@ static struct fb_monspecs at91fb_default_monspecs = {
 					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
 
 /* Driver datas */
-static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
 	.lcdcon_is_backlight		= true,
 	.default_bpp			= 32,
 	.default_dmacon			= ATMEL_LCDC_DMAEN,
@@ -295,7 +295,7 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 };
 
 #else
-static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index aa265dcf212..604eecf6cd7 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -170,7 +170,7 @@ static struct fb_monspecs at91fb_default_monspecs = {
 					| ATMEL_LCDC_DISTYPE_TFT \
 					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
 
-static void at91_lcdc_power_control(int on)
+static void at91_lcdc_power_control(struct atmel_lcdfb_pdata *pdata, int on)
 {
 	if (on)
 		at91_set_gpio_value(AT91_PIN_PC1, 0);	/* power up */
@@ -179,7 +179,7 @@ static void at91_lcdc_power_control(int on)
 }
 
 /* Driver datas */
-static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
 	.lcdcon_is_backlight            = true,
 	.default_bpp			= 16,
 	.default_dmacon			= ATMEL_LCDC_DMAEN,
@@ -191,7 +191,7 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 };
 
 #else
-static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index 3aaa9784cf0..f1d49e929cc 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -26,7 +26,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
-#include <linux/i2c/pca953x.h>
+#include <linux/platform_data/pca953x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-at91/board.h b/arch/arm/mach-at91/board.h
index 4a234fb2ab3..6c08b341167 100644
--- a/arch/arm/mach-at91/board.h
+++ b/arch/arm/mach-at91/board.h
@@ -107,8 +107,8 @@ extern void __init at91_add_device_pwm(u32 mask);
 extern void __init at91_add_device_ssc(unsigned id, unsigned pins);
 
  /* LCD Controller */
-struct atmel_lcdfb_info;
-extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
+struct atmel_lcdfb_pdata;
+extern void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data);
 
  /* AC97 */
 extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);
diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
deleted file mode 100644
index 4ec6a6d9b9b..00000000000
--- a/arch/arm/mach-at91/cpuidle.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * based on arch/arm/mach-kirkwood/cpuidle.c
- *
- * CPU idle support for AT91 SoC
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * The cpu idle uses wait-for-interrupt and RAM self refresh in order
- * to implement two idle states -
- * #1 wait-for-interrupt
- * #2 wait-for-interrupt and RAM self refresh
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/cpuidle.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <asm/proc-fns.h>
-#include <asm/cpuidle.h>
-#include <mach/cpu.h>
-
-#include "pm.h"
-
-#define AT91_MAX_STATES	2
-
-/* Actual code that puts the SoC in different idle states */
-static int at91_enter_idle(struct cpuidle_device *dev,
-			struct cpuidle_driver *drv,
-			       int index)
-{
-	if (cpu_is_at91rm9200())
-		at91rm9200_standby();
-	else if (cpu_is_at91sam9g45())
-		at91sam9g45_standby();
-	else if (cpu_is_at91sam9263())
-		at91sam9263_standby();
-	else
-		at91sam9_standby();
-
-	return index;
-}
-
-static struct cpuidle_driver at91_idle_driver = {
-	.name			= "at91_idle",
-	.owner			= THIS_MODULE,
-	.states[0]		= ARM_CPUIDLE_WFI_STATE,
-	.states[1]		= {
-		.enter			= at91_enter_idle,
-		.exit_latency		= 10,
-		.target_residency	= 10000,
-		.flags			= CPUIDLE_FLAG_TIME_VALID,
-		.name			= "RAM_SR",
-		.desc			= "WFI and DDR Self Refresh",
-	},
-	.state_count = AT91_MAX_STATES,
-};
-
-/* Initialize CPU idle by registering the idle states */
-static int __init at91_init_cpuidle(void)
-{
-	return cpuidle_register(&at91_idle_driver, NULL);
-}
-
-device_initcall(at91_init_cpuidle);
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index dc6e2f5f804..26dee3ce939 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -34,6 +34,8 @@ extern int  __init at91_aic_of_init(struct device_node *node,
 				    struct device_node *parent);
 extern int  __init at91_aic5_of_init(struct device_node *node,
 				    struct device_node *parent);
+extern void __init at91_sysirq_mask_rtc(u32 rtc_base);
+extern void __init at91_sysirq_mask_rtt(u32 rtt_base);
 
 
  /* Timer */
diff --git a/arch/arm/mach-at91/include/mach/at91_adc.h b/arch/arm/mach-at91/include/mach/at91_adc.h
index 048a57f76bd..c287307b9a3 100644
--- a/arch/arm/mach-at91/include/mach/at91_adc.h
+++ b/arch/arm/mach-at91/include/mach/at91_adc.h
@@ -60,14 +60,48 @@
 #define AT91_ADC_IER		0x24		/* Interrupt Enable Register */
 #define AT91_ADC_IDR		0x28		/* Interrupt Disable Register */
 #define AT91_ADC_IMR		0x2C		/* Interrupt Mask Register */
+#define		AT91_ADC_IER_PEN	(1 << 29)
+#define		AT91_ADC_IER_NOPEN	(1 << 30)
+#define		AT91_ADC_IER_XRDY	(1 << 20)
+#define		AT91_ADC_IER_YRDY	(1 << 21)
+#define		AT91_ADC_IER_PRDY	(1 << 22)
+#define		AT91_ADC_ISR_PENS	(1 << 31)
 
 #define AT91_ADC_CHR(n)		(0x30 + ((n) * 4))	/* Channel Data Register N */
 #define		AT91_ADC_DATA		(0x3ff)
 
 #define AT91_ADC_CDR0_9X5	(0x50)			/* Channel Data Register 0 for 9X5 */
 
+#define AT91_ADC_ACR		0x94	/* Analog Control Register */
+#define		AT91_ADC_ACR_PENDETSENS	(0x3 << 0)	/* pull-up resistor */
+
+#define AT91_ADC_TSMR		0xB0
+#define		AT91_ADC_TSMR_TSMODE	(3 << 0)	/* Touch Screen Mode */
+#define			AT91_ADC_TSMR_TSMODE_NONE		(0 << 0)
+#define			AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS	(1 << 0)
+#define			AT91_ADC_TSMR_TSMODE_4WIRE_PRESS	(2 << 0)
+#define			AT91_ADC_TSMR_TSMODE_5WIRE		(3 << 0)
+#define		AT91_ADC_TSMR_TSAV	(3 << 4)	/* Averages samples */
+#define			AT91_ADC_TSMR_TSAV_(x)		((x) << 4)
+#define		AT91_ADC_TSMR_SCTIM	(0x0f << 16)	/* Switch closure time */
+#define		AT91_ADC_TSMR_PENDBC	(0x0f << 28)	/* Pen Debounce time */
+#define			AT91_ADC_TSMR_PENDBC_(x)	((x) << 28)
+#define		AT91_ADC_TSMR_NOTSDMA	(1 << 22)	/* No Touchscreen DMA */
+#define		AT91_ADC_TSMR_PENDET_DIS	(0 << 24)	/* Pen contact detection disable */
+#define		AT91_ADC_TSMR_PENDET_ENA	(1 << 24)	/* Pen contact detection enable */
+
+#define AT91_ADC_TSXPOSR	0xB4
+#define AT91_ADC_TSYPOSR	0xB8
+#define AT91_ADC_TSPRESSR	0xBC
+
 #define AT91_ADC_TRGR_9260	AT91_ADC_MR
 #define AT91_ADC_TRGR_9G45	0x08
 #define AT91_ADC_TRGR_9X5	0xC0
 
+/* Trigger Register bit field */
+#define		AT91_ADC_TRGR_TRGPER	(0xffff << 16)
+#define			AT91_ADC_TRGR_TRGPER_(x)	((x) << 16)
+#define		AT91_ADC_TRGR_TRGMOD	(0x7 << 0)
+#define			AT91_ADC_TRGR_MOD_PERIOD_TRIG	(5 << 0)
+
 #endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9n12.h b/arch/arm/mach-at91/include/mach/at91sam9n12.h
index d374b87c045..0151bcf6163 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9n12.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9n12.h
@@ -49,6 +49,11 @@
 #define AT91SAM9N12_BASE_USART3	0xf8028000
 
 /*
+ * System Peripherals
+ */
+#define AT91SAM9N12_BASE_RTC	0xfffffeb0
+
+/*
  * Internal Memory.
  */
 #define AT91SAM9N12_SRAM_BASE	0x00300000	/* Internal SRAM base address */
diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h
index c75ee19b58d..2fc76c49e97 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9x5.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h
@@ -55,6 +55,11 @@
 #define AT91SAM9X5_BASE_USART2	0xf8024000
 
 /*
+ * System Peripherals
+ */
+#define AT91SAM9X5_BASE_RTC	0xfffffeb0
+
+/*
  * Internal Memory.
  */
 #define AT91SAM9X5_SRAM_BASE	0x00300000	/* Internal SRAM base address */
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index a832e070761..f17aa315001 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -33,6 +33,7 @@
 #include <mach/at91sam9g45.h>
 #include <mach/at91sam9x5.h>
 #include <mach/at91sam9n12.h>
+#include <mach/sama5d3.h>
 
 /*
  * On all at91 except rm9200 and x40 have the System Controller starts
diff --git a/arch/arm/mach-at91/include/mach/sama5d3.h b/arch/arm/mach-at91/include/mach/sama5d3.h
index 6dc81ee3804..25613d8c6dc 100644
--- a/arch/arm/mach-at91/include/mach/sama5d3.h
+++ b/arch/arm/mach-at91/include/mach/sama5d3.h
@@ -65,6 +65,19 @@
 #define SAMA5D3_ID_IRQ0		47	/* Advanced Interrupt Controller (IRQ0) */
 
 /*
+ * User Peripheral physical base addresses.
+ */
+#define SAMA5D3_BASE_USART0	0xf001c000
+#define SAMA5D3_BASE_USART1	0xf0020000
+#define SAMA5D3_BASE_USART2	0xf8020000
+#define SAMA5D3_BASE_USART3	0xf8024000
+
+/*
+ * System Peripherals
+ */
+#define SAMA5D3_BASE_RTC	0xfffffeb0
+
+/*
  * Internal Memory
  */
 #define SAMA5D3_SRAM_BASE	0x00300000	/* Internal SRAM base address */
diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h
index 5659f7c7212..4bb644f8e87 100644
--- a/arch/arm/mach-at91/include/mach/uncompress.h
+++ b/arch/arm/mach-at91/include/mach/uncompress.h
@@ -94,6 +94,15 @@ static const u32 uarts_sam9x5[] = {
 	0,
 };
 
+static const u32 uarts_sama5[] = {
+	AT91_BASE_DBGU1,
+	SAMA5D3_BASE_USART0,
+	SAMA5D3_BASE_USART1,
+	SAMA5D3_BASE_USART2,
+	SAMA5D3_BASE_USART3,
+	0,
+};
+
 static inline const u32* decomp_soc_detect(void __iomem *dbgu_base)
 {
 	u32 cidr, socid;
@@ -121,8 +130,12 @@ static inline const u32* decomp_soc_detect(void __iomem *dbgu_base)
 	case ARCH_ID_AT91SAM9RL64:
 		return uarts_sam9rl;
 
+	case ARCH_ID_AT91SAM9N12:
 	case ARCH_ID_AT91SAM9X5:
 		return uarts_sam9x5;
+
+	case ARCH_ID_SAMA5D3:
+		return uarts_sama5;
 	}
 
 	/* at91sam9g10 */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 15afb5d9271..9986542e806 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -39,6 +39,8 @@
 #include "at91_rstc.h"
 #include "at91_shdwc.h"
 
+static void (*at91_pm_standby)(void);
+
 static void __init show_reset_status(void)
 {
 	static char reset[] __initdata = "reset";
@@ -266,14 +268,8 @@ static int at91_pm_enter(suspend_state_t state)
 			 * For ARM 926 based chips, this requirement is weaker
 			 * as at91sam9 can access a RAM in self-refresh mode.
 			 */
-			if (cpu_is_at91rm9200())
-				at91rm9200_standby();
-			else if (cpu_is_at91sam9g45())
-				at91sam9g45_standby();
-			else if (cpu_is_at91sam9263())
-				at91sam9263_standby();
-			else
-				at91sam9_standby();
+			if (at91_pm_standby)
+				at91_pm_standby();
 			break;
 
 		case PM_SUSPEND_ON:
@@ -314,6 +310,18 @@ static const struct platform_suspend_ops at91_pm_ops = {
 	.end	= at91_pm_end,
 };
 
+static struct platform_device at91_cpuidle_device = {
+	.name = "cpuidle-at91",
+};
+
+void at91_pm_set_standby(void (*at91_standby)(void))
+{
+	if (at91_standby) {
+		at91_cpuidle_device.dev.platform_data = at91_standby;
+		at91_pm_standby = at91_standby;
+	}
+}
+
 static int __init at91_pm_init(void)
 {
 #ifdef CONFIG_AT91_SLOW_CLOCK
@@ -325,6 +333,9 @@ static int __init at91_pm_init(void)
 	/* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
 	if (cpu_is_at91rm9200())
 		at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
+	
+	if (at91_cpuidle_device.dev.platform_data)
+		platform_device_register(&at91_cpuidle_device);
 
 	suspend_set_ops(&at91_pm_ops);
 
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 2f5908f0b8c..c5101dcb4fb 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -11,9 +11,17 @@
 #ifndef __ARCH_ARM_MACH_AT91_PM
 #define __ARCH_ARM_MACH_AT91_PM
 
+#include <asm/proc-fns.h>
+
 #include <mach/at91_ramc.h>
 #include <mach/at91rm9200_sdramc.h>
 
+#ifdef CONFIG_PM
+extern void at91_pm_set_standby(void (*at91_standby)(void));
+#else
+static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
+#endif
+
 /*
  * The AT91RM9200 goes into self-refresh mode with this command, and will
  * terminate self-refresh automatically on the next SDRAM access.
@@ -45,16 +53,18 @@ static inline void at91rm9200_standby(void)
 /* We manage both DDRAM/SDRAM controllers, we need more than one value to
  * remember.
  */
-static inline void at91sam9g45_standby(void)
+static inline void at91_ddr_standby(void)
 {
 	/* Those two values allow us to delay self-refresh activation
 	 * to the maximum. */
-	u32 lpr0, lpr1;
-	u32 saved_lpr0, saved_lpr1;
+	u32 lpr0, lpr1 = 0;
+	u32 saved_lpr0, saved_lpr1 = 0;
 
-	saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
-	lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
-	lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+	if (at91_ramc_base[1]) {
+		saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
+		lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
+		lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+	}
 
 	saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
 	lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
@@ -62,25 +72,29 @@ static inline void at91sam9g45_standby(void)
 
 	/* self-refresh mode now */
 	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
-	at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
+	if (at91_ramc_base[1])
+		at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
 
 	cpu_do_idle();
 
 	at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
-	at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
+	if (at91_ramc_base[1])
+		at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
 }
 
 /* We manage both DDRAM/SDRAM controllers, we need more than one value to
  * remember.
  */
-static inline void at91sam9263_standby(void)
+static inline void at91sam9_sdram_standby(void)
 {
-	u32 lpr0, lpr1;
-	u32 saved_lpr0, saved_lpr1;
+	u32 lpr0, lpr1 = 0;
+	u32 saved_lpr0, saved_lpr1 = 0;
 
-	saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
-	lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
-	lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
+	if (at91_ramc_base[1]) {
+		saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
+		lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
+		lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
+	}
 
 	saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR);
 	lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB;
@@ -88,27 +102,14 @@ static inline void at91sam9263_standby(void)
 
 	/* self-refresh mode now */
 	at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
-	at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
+	if (at91_ramc_base[1])
+		at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
 
 	cpu_do_idle();
 
 	at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
-	at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
-}
-
-static inline void at91sam9_standby(void)
-{
-	u32 saved_lpr, lpr;
-
-	saved_lpr = at91_ramc_read(0, AT91_SDRAMC_LPR);
-
-	lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
-	at91_ramc_write(0, AT91_SDRAMC_LPR, lpr |
-			AT91_SDRAMC_LPCB_SELF_REFRESH);
-
-	cpu_do_idle();
-
-	at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr);
+	if (at91_ramc_base[1])
+		at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
 }
 
 #endif
diff --git a/arch/arm/mach-at91/sama5d3.c b/arch/arm/mach-at91/sama5d3.c
index 401279715ab..a28873fe304 100644
--- a/arch/arm/mach-at91/sama5d3.c
+++ b/arch/arm/mach-at91/sama5d3.c
@@ -95,19 +95,19 @@ static struct clk twi0_clk = {
 	.name		= "twi0_clk",
 	.pid		= SAMA5D3_ID_TWI0,
 	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV2,
+	.div		= AT91_PMC_PCR_DIV8,
 };
 static struct clk twi1_clk = {
 	.name		= "twi1_clk",
 	.pid		= SAMA5D3_ID_TWI1,
 	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV2,
+	.div		= AT91_PMC_PCR_DIV8,
 };
 static struct clk twi2_clk = {
 	.name		= "twi2_clk",
 	.pid		= SAMA5D3_ID_TWI2,
 	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV2,
+	.div		= AT91_PMC_PCR_DIV8,
 };
 static struct clk mmc0_clk = {
 	.name		= "mci0_clk",
@@ -371,7 +371,13 @@ static void __init sama5d3_map_io(void)
 	at91_init_sram(0, SAMA5D3_SRAM_BASE, SAMA5D3_SRAM_SIZE);
 }
 
+static void __init sama5d3_initialize(void)
+{
+	at91_sysirq_mask_rtc(SAMA5D3_BASE_RTC);
+}
+
 AT91_SOC_START(sama5d3)
 	.map_io = sama5d3_map_io,
 	.register_clocks = sama5d3_register_clocks,
+	.init = sama5d3_initialize,
 AT91_SOC_END
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index b17fbcf4d9e..094b3459c28 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -23,6 +23,7 @@
 #include "at91_shdwc.h"
 #include "soc.h"
 #include "generic.h"
+#include "pm.h"
 
 struct at91_init_soc __initdata at91_boot_soc;
 
@@ -376,15 +377,16 @@ static void at91_dt_rstc(void)
 }
 
 static struct of_device_id ramc_ids[] = {
-	{ .compatible = "atmel,at91rm9200-sdramc" },
-	{ .compatible = "atmel,at91sam9260-sdramc" },
-	{ .compatible = "atmel,at91sam9g45-ddramc" },
+	{ .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
+	{ .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
+	{ .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby },
 	{ /*sentinel*/ }
 };
 
 static void at91_dt_ramc(void)
 {
 	struct device_node *np;
+	const struct of_device_id *of_id;
 
 	np = of_find_matching_node(NULL, ramc_ids);
 	if (!np)
@@ -396,6 +398,12 @@ static void at91_dt_ramc(void)
 	/* the controller may have 2 banks */
 	at91_ramc_base[1] = of_iomap(np, 1);
 
+	of_id = of_match_node(ramc_ids, np);
+	if (!of_id)
+		pr_warn("AT91: ramc no standby function available\n");
+	else
+		at91_pm_set_standby(of_id->data);
+
 	of_node_put(np);
 }
 
diff --git a/arch/arm/mach-at91/sysirq_mask.c b/arch/arm/mach-at91/sysirq_mask.c
new file mode 100644
index 00000000000..2ba694f9626
--- /dev/null
+++ b/arch/arm/mach-at91/sysirq_mask.c
@@ -0,0 +1,71 @@
+/*
+ * sysirq_mask.c - System-interrupt masking
+ *
+ * Copyright (C) 2013 Johan Hovold <jhovold@gmail.com>
+ *
+ * Functions to disable system interrupts from backup-powered peripherals.
+ *
+ * The RTC and RTT-peripherals are generally powered by backup power (VDDBU)
+ * and are not reset on wake-up, user, watchdog or software reset. This means
+ * that their interrupts may be enabled during early boot (e.g. after a user
+ * reset).
+ *
+ * As the RTC and RTT share the system-interrupt line with the PIT, an
+ * interrupt occurring before a handler has been installed would lead to the
+ * system interrupt being disabled and prevent the system from booting.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/io.h>
+#include <mach/at91_rtt.h>
+
+#include "generic.h"
+
+#define AT91_RTC_IDR	0x24	/* Interrupt Disable Register */
+#define AT91_RTC_IMR	0x28	/* Interrupt Mask Register */
+
+void __init at91_sysirq_mask_rtc(u32 rtc_base)
+{
+	void __iomem *base;
+	u32 mask;
+
+	base = ioremap(rtc_base, 64);
+	if (!base)
+		return;
+
+	mask = readl_relaxed(base + AT91_RTC_IMR);
+	if (mask) {
+		pr_info("AT91: Disabling rtc irq\n");
+		writel_relaxed(mask, base + AT91_RTC_IDR);
+		(void)readl_relaxed(base + AT91_RTC_IMR);	/* flush */
+	}
+
+	iounmap(base);
+}
+
+void __init at91_sysirq_mask_rtt(u32 rtt_base)
+{
+	void __iomem *base;
+	void __iomem *reg;
+	u32 mode;
+
+	base = ioremap(rtt_base, 16);
+	if (!base)
+		return;
+
+	reg = base + AT91_RTT_MR;
+
+	mode = readl_relaxed(reg);
+	if (mode & (AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN)) {
+		pr_info("AT91: Disabling rtt irq\n");
+		mode &= ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN);
+		writel_relaxed(mode, reg);
+		(void)readl_relaxed(reg);			/* flush */
+	}
+
+	iounmap(base);
+}