Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "A large number of cleanups, all over the platforms.  This is dominated
  largely by the Samsung platforms (s3c, s5p, exynos) and a few of the
  others moving code out of arch/arm into more appropriate subsystems.

  The clocksource and irqchip drivers are now abstracted to the point
  where platforms that are already cleaned up do not need to even
  specify the driver they use, it can all get configured from the device
  tree as we do for normal device drivers.  The clocksource changes
  basically touch every single platform in the process.

  We further clean up the use of platform specific header files here,
  with the goal of turning more of the platforms over to being
  "multiplatform" enabled, which implies that they cannot expose their
  headers to architecture independent code any more.

  It is expected that no functional changes are part of the cleanup.
  The overall reduction in total code lines is mostly the result of
  removing broken and obsolete code."

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
  ARM: mvebu: correct gated clock documentation
  ARM: kirkwood: add missing include for nsa310
  ARM: exynos: move exynos4210-combiner to drivers/irqchip
  mfd: db8500-prcmu: update resource passing
  drivers/db8500-cpufreq: delete dangling include
  ARM: at91: remove NEOCORE 926 board
  sunxi: Cleanup the reset code and add meaningful registers defines
  ARM: S3C24XX: header mach/regs-mem.h local
  ARM: S3C24XX: header mach/regs-power.h local
  ARM: S3C24XX: header mach/regs-s3c2412-mem.h local
  ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/
  ARM: S3C24XX: transform s3c2443 subirqs into new structure
  ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2443 irq code to irq.c
  ARM: S3C24XX: transform s3c2416 irqs into new structure
  ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2416 irq init to common irq code
  ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property
  ARM: S3C24XX: Move irq syscore-ops to irq-pm
  clocksource: always define CLOCKSOURCE_OF_DECLARE
  ...

44 files changed, 77 insertions, 484 deletions

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 958358c91af..6071f4c3d65 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -352,12 +352,6 @@ config MACH_USB_A9263
 	  Select this if you are using a Calao Systems USB-A9263.
 	  <http://www.calao-systems.com>
 
-config MACH_NEOCORE926
-	bool "Adeneo NEOCORE926"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using the Adeneo Neocore 926 board.
-
 endif
 
 # ----------------------------------------------------------
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index b38a1dcb79b..39218ca6d8e 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -66,7 +66,6 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o
 # AT91SAM9263 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
 obj-$(CONFIG_MACH_USB_A9263)	+= board-usb-a926x.o
-obj-$(CONFIG_MACH_NEOCORE926)	+= board-neocore926.o
 
 # AT91SAM9RL board-specific support
 obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index cafe98836c8..2acdff4c1df 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -174,7 +174,6 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
 static struct clock_event_device clkevt = {
 	.name		= "at91_tick",
 	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
 	.rating		= 150,
 	.set_next_event	= clkevt32k_next_event,
 	.set_mode	= clkevt32k_mode,
@@ -265,17 +264,10 @@ void __init at91rm9200_timer_init(void)
 	at91_st_write(AT91_ST_RTMR, 1);
 
 	/* Setup timer clockevent, with minimum of two ticks (important!!) */
-	clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift);
-	clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt);
-	clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1;
 	clkevt.cpumask = cpumask_of(0);
-	clockevents_register_device(&clkevt);
+	clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK,
+					2, AT91_ST_ALMV);
 
 	/* register clocksource */
 	clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
 }
-
-struct sys_timer at91rm9200_timer = {
-	.init		= at91rm9200_timer_init,
-};
-
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 358412f1f5f..3a4bc2e1a65 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -104,12 +104,38 @@ pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 	}
 }
 
+static void at91sam926x_pit_suspend(struct clock_event_device *cedev)
+{
+	/* Disable timer */
+	pit_write(AT91_PIT_MR, 0);
+}
+
+static void at91sam926x_pit_reset(void)
+{
+	/* Disable timer and irqs */
+	pit_write(AT91_PIT_MR, 0);
+
+	/* Clear any pending interrupts, wait for PIT to stop counting */
+	while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0)
+		cpu_relax();
+
+	/* Start PIT but don't enable IRQ */
+	pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
+}
+
+static void at91sam926x_pit_resume(struct clock_event_device *cedev)
+{
+	at91sam926x_pit_reset();
+}
+
 static struct clock_event_device pit_clkevt = {
 	.name		= "pit",
 	.features	= CLOCK_EVT_FEAT_PERIODIC,
 	.shift		= 32,
 	.rating		= 100,
 	.set_mode	= pit_clkevt_mode,
+	.suspend	= at91sam926x_pit_suspend,
+	.resume		= at91sam926x_pit_resume,
 };
 
 
@@ -150,19 +176,6 @@ static struct irqaction at91sam926x_pit_irq = {
 	.irq		= NR_IRQS_LEGACY + AT91_ID_SYS,
 };
 
-static void at91sam926x_pit_reset(void)
-{
-	/* Disable timer and irqs */
-	pit_write(AT91_PIT_MR, 0);
-
-	/* Clear any pending interrupts, wait for PIT to stop counting */
-	while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0)
-		cpu_relax();
-
-	/* Start PIT but don't enable IRQ */
-	pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
-}
-
 #ifdef CONFIG_OF
 static struct of_device_id pit_timer_ids[] = {
 	{ .compatible = "atmel,at91sam9260-pit" },
@@ -211,7 +224,7 @@ static int __init of_at91sam926x_pit_init(void)
 /*
  * Set up both clocksource and clockevent support.
  */
-static void __init at91sam926x_pit_init(void)
+void __init at91sam926x_pit_init(void)
 {
 	unsigned long	pit_rate;
 	unsigned	bits;
@@ -250,12 +263,6 @@ static void __init at91sam926x_pit_init(void)
 	clockevents_register_device(&pit_clkevt);
 }
 
-static void at91sam926x_pit_suspend(void)
-{
-	/* Disable timer */
-	pit_write(AT91_PIT_MR, 0);
-}
-
 void __init at91sam926x_ioremap_pit(u32 addr)
 {
 #if defined(CONFIG_OF)
@@ -272,9 +279,3 @@ void __init at91sam926x_ioremap_pit(u32 addr)
 	if (!pit_base_addr)
 		panic("Impossible to ioremap PIT\n");
 }
-
-struct sys_timer at91sam926x_timer = {
-	.init		= at91sam926x_pit_init,
-	.suspend	= at91sam926x_pit_suspend,
-	.resume		= at91sam926x_pit_reset,
-};
diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c
index 0e57e440c06..0c07a4459cb 100644
--- a/arch/arm/mach-at91/at91x40_time.c
+++ b/arch/arm/mach-at91/at91x40_time.c
@@ -42,9 +42,10 @@
 #define	AT91_TC_CLK1BASE	0x40
 #define	AT91_TC_CLK2BASE	0x80
 
-static unsigned long at91x40_gettimeoffset(void)
+static u32 at91x40_gettimeoffset(void)
 {
-	return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 / (AT91X40_MASTER_CLOCK / 128));
+	return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 /
+		(AT91X40_MASTER_CLOCK / 128)) * 1000;
 }
 
 static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id)
@@ -64,6 +65,8 @@ void __init at91x40_timer_init(void)
 {
 	unsigned int v;
 
+	arch_gettimeoffset = at91x40_gettimeoffset;
+
 	at91_tc_write(AT91_TC_BCR, 0);
 	v = at91_tc_read(AT91_TC_BMR);
 	v = (v & ~AT91_TC_TC1XC1S) | AT91_TC_TC1XC1S_NONE;
@@ -79,9 +82,3 @@ void __init at91x40_timer_init(void)
 
 	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN));
 }
-
-struct sys_timer at91x40_timer = {
-	.init	= at91x40_timer_init,
-	.offset	= at91x40_gettimeoffset,
-};
-
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index b99b5752cc1..35ab632bbf6 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -90,7 +90,7 @@ static void __init onearm_board_init(void)
 
 MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= onearm_init_early,
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 854b9797428..f95e31cda4b 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -210,7 +210,7 @@ static void __init afeb9260_board_init(void)
 
 MACHINE_START(AFEB9260, "Custom afeb9260 board")
 	/* Maintainer: Sergey Lapin <slapin@ossfans.org> */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= afeb9260_init_early,
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index 28a18ce6d91..ade948b8266 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -187,7 +187,7 @@ static void __init cam60_board_init(void)
 
 MACHINE_START(CAM60, "KwikByte CAM60")
 	/* Maintainer: KwikByte */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= cam60_init_early,
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index c17bb533a94..92983050a9b 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -157,7 +157,7 @@ static void __init carmeva_board_init(void)
 
 MACHINE_START(CARMEVA, "Carmeva")
 	/* Maintainer: Conitec Datasystems */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= carmeva_init_early,
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 847432441ec..008527efdbc 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -374,7 +374,7 @@ MACHINE_START(CPUAT9260, "Eukrea CPU9260")
 MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
 #endif
 	/* Maintainer: Eric Benard - EUKREA Electromatique */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= cpu9krea_init_early,
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index 2a7af786874..42f1353a4ba 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -178,7 +178,7 @@ static void __init cpuat91_board_init(void)
 
 MACHINE_START(CPUAT91, "Eukrea")
 	/* Maintainer: Eric Benard - EUKREA Electromatique */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= cpuat91_init_early,
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 48a531e05be..e5fde215225 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -251,7 +251,7 @@ static void __init csb337_board_init(void)
 
 MACHINE_START(CSB337, "Cogent CSB337")
 	/* Maintainer: Bill Gatliff */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= csb337_init_early,
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index ec0f3abd504..fdf11061c57 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -132,7 +132,7 @@ static void __init csb637_board_init(void)
 
 MACHINE_START(CSB637, "Cogent CSB637")
 	/* Maintainer: Bill Gatliff */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= csb637_init_early,
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index 881170ce61d..8db30132abe 100644
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -49,7 +49,7 @@ static const char *at91_dt_board_compat[] __initdata = {
 
 DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= at91_dt_initialize,
diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c
index b489388a6f8..becf0a6a289 100644
--- a/arch/arm/mach-at91/board-eb01.c
+++ b/arch/arm/mach-at91/board-eb01.c
@@ -44,7 +44,7 @@ static void __init at91eb01_init_early(void)
 
 MACHINE_START(AT91EB01, "Atmel AT91 EB01")
 	/* Maintainer: Greg Ungerer <gerg@snapgear.com> */
-	.timer		= &at91x40_timer,
+	.init_time	= at91x40_timer_init,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= at91eb01_init_early,
 	.init_irq	= at91eb01_init_irq,
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 9f5e71c95f0..f9be8161bbf 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -116,7 +116,7 @@ static void __init eb9200_board_init(void)
 }
 
 MACHINE_START(ATEB9200, "Embest ATEB9200")
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= eb9200_init_early,
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index ef69e0ebe94..b2fcd71262b 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -181,7 +181,7 @@ static void __init ecb_at91board_init(void)
 
 MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
 	/* Maintainer: emQbit.com */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ecb_at91init_early,
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index 50f3d3795c0..77de410efc9 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -149,7 +149,7 @@ static void __init eco920_board_init(void)
 
 MACHINE_START(ECO920, "eco920")
 	/* Maintainer: Sascha Hauer */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= eco920_init_early,
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 5d44eba0f20..737c0856362 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -159,7 +159,7 @@ static void __init flexibity_board_init(void)
 
 MACHINE_START(FLEXIBITY, "Flexibity Connect")
 	/* Maintainer: Maxim Osipov */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= flexibity_init_early,
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index 191d37c16ba..2ea7059b840 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -261,7 +261,7 @@ static void __init foxg20_board_init(void)
 
 MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20")
 	/* Maintainer: Sergio Tanzilli */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= foxg20_init_early,
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index 23a2fa17ab2..c1d61d24779 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -574,7 +574,7 @@ static void __init gsia18s_board_init(void)
 }
 
 MACHINE_START(GSIA18S, "GS_IA18_S")
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= gsia18s_init_early,
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 9a43d1e1a03..88e2f5d2d16 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -103,7 +103,7 @@ static void __init kafa_board_init(void)
 
 MACHINE_START(KAFA, "Sperry-Sun KAFA")
 	/* Maintainer: Sergei Sharonov */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= kafa_init_early,
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index f168bec2369..0c519d9ebff 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -149,7 +149,7 @@ static void __init kb9202_board_init(void)
 
 MACHINE_START(KB9200, "KB920x")
 	/* Maintainer: KwikByte, Inc. */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= kb9202_init_early,
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
deleted file mode 100644
index bc7a1c4a1f6..00000000000
--- a/arch/arm/mach-at91/board-neocore926.c
+++ /dev/null
@@ -1,387 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-neocore926.c
- *
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2007 Atmel Corporation
- *  Copyright (C) 2008 ADENEO.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/fb.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/at91sam9_smc.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init neocore926_init_early(void)
-{
-	/* Initialize processor: 20 MHz crystal */
-	at91_initialize(20000000);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata neocore926_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= { AT91_PIN_PA24, AT91_PIN_PA21 },
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata neocore926_udc_data = {
-	.vbus_pin	= AT91_PIN_PA25,
-	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */
-};
-
-
-/*
- * ADS7846 Touchscreen
- */
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-static int ads7843_pendown_state(void)
-{
-	return !at91_get_gpio_value(AT91_PIN_PA15);	/* Touchscreen PENIRQ */
-}
-
-static struct ads7846_platform_data ads_info = {
-	.model			= 7843,
-	.x_min			= 150,
-	.x_max			= 3830,
-	.y_min			= 190,
-	.y_max			= 3830,
-	.vref_delay_usecs	= 100,
-	.x_plate_ohms		= 450,
-	.y_plate_ohms		= 250,
-	.pressure_max		= 15000,
-	.debounce_max		= 1,
-	.debounce_rep		= 0,
-	.debounce_tol		= (~0),
-	.get_pendown_state	= ads7843_pendown_state,
-};
-
-static void __init neocore926_add_device_ts(void)
-{
-	at91_set_B_periph(AT91_PIN_PA15, 1);	/* External IRQ1, with pullup */
-	at91_set_gpio_input(AT91_PIN_PC13, 1);	/* Touchscreen BUSY signal */
-}
-#else
-static void __init neocore926_add_device_ts(void) {}
-#endif
-
-/*
- * SPI devices.
- */
-static struct spi_board_info neocore926_spi_devices[] = {
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-	{	/* DataFlash card */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#endif
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-	{
-		.modalias	= "ads7846",
-		.chip_select	= 1,
-		.max_speed_hz	= 125000 * 16,
-		.bus_num	= 0,
-		.platform_data	= &ads_info,
-		.irq		= NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1,
-	},
-#endif
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct mci_platform_data __initdata neocore926_mci0_data = {
-	.slot[0] = {
-		.bus_width	= 4,
-		.detect_pin	= AT91_PIN_PE18,
-		.wp_pin		= AT91_PIN_PE19,
-	},
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata neocore926_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PE31,
-	.is_rmii	= 1,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata neocore926_nand_partition[] = {
-	{
-		.name	= "Linux Kernel",	/* "Partition 1", */
-		.offset	= 0,
-		.size	= SZ_8M,
-	},
-	{
-		.name	= "Filesystem",		/* "Partition 2", */
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= SZ_32M,
-	},
-	{
-		.name	= "Free",		/* "Partition 3", */
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct atmel_nand_data __initdata neocore926_nand_data = {
-	.ale			= 21,
-	.cle			= 22,
-	.rdy_pin		= AT91_PIN_PB19,
-	.rdy_pin_active_low	= 1,
-	.enable_pin		= AT91_PIN_PD15,
-	.ecc_mode		= NAND_ECC_SOFT,
-	.parts			= neocore926_nand_partition,
-	.num_parts		= ARRAY_SIZE(neocore926_nand_partition),
-	.det_pin		= -EINVAL,
-};
-
-static struct sam9_smc_config __initdata neocore926_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 1,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 4,
-	.nrd_pulse		= 4,
-	.ncs_write_pulse	= 4,
-	.nwe_pulse		= 4,
-
-	.read_cycle		= 6,
-	.write_cycle		= 6,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
-	.tdf_cycles		= 2,
-};
-
-static void __init neocore926_add_device_nand(void)
-{
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(0, 3, &neocore926_nand_smc_config);
-
-	at91_add_device_nand(&neocore926_nand_data);
-}
-
-
-/*
- * LCD Controller
- */
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static struct fb_videomode at91_tft_vga_modes[] = {
-	{
-		.name		= "TX09D50VM1CCA @ 60",
-		.refresh	= 60,
-		.xres		= 240,		.yres		= 320,
-		.pixclock	= KHZ2PICOS(5000),
-
-		.left_margin	= 1,		.right_margin	= 33,
-		.upper_margin	= 1,		.lower_margin	= 0,
-		.hsync_len	= 5,		.vsync_len	= 1,
-
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct fb_monspecs at91fb_default_monspecs = {
-	.manufacturer	= "HIT",
-	.monitor	= "TX09D70VM1CCA",
-
-	.modedb		= at91_tft_vga_modes,
-	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
-	.hfmin		= 15000,
-	.hfmax		= 64000,
-	.vfmin		= 50,
-	.vfmax		= 150,
-};
-
-#define AT91SAM9263_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
-					| ATMEL_LCDC_DISTYPE_TFT \
-					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-
-static void at91_lcdc_power_control(int on)
-{
-	at91_set_gpio_value(AT91_PIN_PA30, on);
-}
-
-/* Driver datas */
-static struct atmel_lcdfb_info __initdata neocore926_lcdc_data = {
-	.lcdcon_is_backlight		= true,
-	.default_bpp			= 16,
-	.default_dmacon			= ATMEL_LCDC_DMAEN,
-	.default_lcdcon2		= AT91SAM9263_DEFAULT_LCDCON2,
-	.default_monspecs		= &at91fb_default_monspecs,
-	.atmel_lcdfb_power_control	= at91_lcdc_power_control,
-	.guard_time			= 1,
-	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB555,
-};
-
-#else
-static struct atmel_lcdfb_info __initdata neocore926_lcdc_data;
-#endif
-
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button neocore926_buttons[] = {
-	{	/* BP1, "leftclic" */
-		.code		= BTN_LEFT,
-		.gpio		= AT91_PIN_PC5,
-		.active_low	= 1,
-		.desc		= "left_click",
-		.wakeup		= 1,
-	},
-	{	/* BP2, "rightclic" */
-		.code		= BTN_RIGHT,
-		.gpio		= AT91_PIN_PC4,
-		.active_low	= 1,
-		.desc		= "right_click",
-		.wakeup		= 1,
-	},
-};
-
-static struct gpio_keys_platform_data neocore926_button_data = {
-	.buttons	= neocore926_buttons,
-	.nbuttons	= ARRAY_SIZE(neocore926_buttons),
-};
-
-static struct platform_device neocore926_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &neocore926_button_data,
-	}
-};
-
-static void __init neocore926_add_device_buttons(void)
-{
-	at91_set_GPIO_periph(AT91_PIN_PC5, 0);	/* left button */
-	at91_set_deglitch(AT91_PIN_PC5, 1);
-	at91_set_GPIO_periph(AT91_PIN_PC4, 0);	/* right button */
-	at91_set_deglitch(AT91_PIN_PC4, 1);
-
-	platform_device_register(&neocore926_button_device);
-}
-#else
-static void __init neocore926_add_device_buttons(void) {}
-#endif
-
-
-/*
- * AC97
- */
-static struct ac97c_platform_data neocore926_ac97_data = {
-	.reset_pin	= AT91_PIN_PA13,
-};
-
-
-static void __init neocore926_board_init(void)
-{
-	/* Serial */
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
-	at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-	at91_add_device_serial();
-
-	/* USB Host */
-	at91_add_device_usbh(&neocore926_usbh_data);
-
-	/* USB Device */
-	at91_add_device_udc(&neocore926_udc_data);
-
-	/* SPI */
-	at91_set_gpio_output(AT91_PIN_PE20, 1);		/* select spi0 clock */
-	at91_add_device_spi(neocore926_spi_devices, ARRAY_SIZE(neocore926_spi_devices));
-
-	/* Touchscreen */
-	neocore926_add_device_ts();
-
-	/* MMC */
-	at91_add_device_mci(0, &neocore926_mci0_data);
-
-	/* Ethernet */
-	at91_add_device_eth(&neocore926_macb_data);
-
-	/* NAND */
-	neocore926_add_device_nand();
-
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-
-	/* LCD Controller */
-	at91_add_device_lcdc(&neocore926_lcdc_data);
-
-	/* Push Buttons */
-	neocore926_add_device_buttons();
-
-	/* AC97 */
-	at91_add_device_ac97(&neocore926_ac97_data);
-}
-
-MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926")
-	/* Maintainer: ADENEO */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.handle_irq	= at91_aic_handle_irq,
-	.init_early	= neocore926_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= neocore926_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index 0299554495d..65c0d6b5ecb 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -217,7 +217,7 @@ static void __init pcontrol_g20_board_init(void)
 
 MACHINE_START(PCONTROL_G20, "PControl G20")
 	/* Maintainer: pgsellmann@portner-elektronik.at */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= pcontrol_g20_init_early,
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 4938f1cd5e1..ab2b2ec36c1 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -119,7 +119,7 @@ static void __init picotux200_board_init(void)
 
 MACHINE_START(PICOTUX2XX, "picotux 200")
 	/* Maintainer: Kleinhenz Elektronik GmbH */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= picotux200_init_early,
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 33b1628467e..aa3bc9b0f15 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -257,7 +257,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(QIL_A9260, "CALAO QIL_A9260")
 	/* Maintainer: calao-systems */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-rm9200-dt.c b/arch/arm/mach-at91/board-rm9200-dt.c
index 5f9ce3da3fd..3fcb6623a33 100644
--- a/arch/arm/mach-at91/board-rm9200-dt.c
+++ b/arch/arm/mach-at91/board-rm9200-dt.c
@@ -47,7 +47,7 @@ static const char *at91rm9200_dt_board_compat[] __initdata = {
 };
 
 DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)")
-	.timer		= &at91rm9200_timer,
+	.init_time      = at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= at91rm9200_dt_initialize,
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 9e5061bef0d..690541b18cb 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -219,7 +219,7 @@ static void __init dk_board_init(void)
 
 MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
 	/* Maintainer: SAN People/Atmel */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= dk_init_early,
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 58277dbc718..8b17dadc1ab 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -186,7 +186,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
 	/* Maintainer: SAN People/Atmel */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
index 2e8b8339a20..f6d7f1958c7 100644
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -222,7 +222,7 @@ static void __init rsi_ews_board_init(void)
 
 MACHINE_START(RSI_EWS, "RSI EWS")
 	/* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= rsi_ews_init_early,
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index b75fbf6003a..43ee4dc43b5 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -218,7 +218,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
 	/* Maintainer: Olimex */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index f0135cd1d85..0b153c87521 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -343,7 +343,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 13ebaa8e410..b446645c772 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -612,7 +612,7 @@ MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
 MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
 #endif
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 89b9608742a..3284df05df1 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -443,7 +443,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 1b7dd9f688d..f9cd1f2c714 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -409,7 +409,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
@@ -419,7 +419,7 @@ MACHINE_END
 
 MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index e4cc375e3a3..2a94896a137 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -502,7 +502,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 377a1097afa..aa265dcf212 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -320,7 +320,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
 	/* Maintainer: Atmel */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index 98771500ddb..3aaa9784cf0 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -177,7 +177,7 @@ static void __init snapper9260_board_init(void)
 }
 
 MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= snapper9260_init_early,
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 48a962b61fa..a033b8df9fb 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -272,7 +272,7 @@ static void __init stamp9g20evb_board_init(void)
 
 MACHINE_START(PORTUXG20, "taskit PortuxG20")
 	/* Maintainer: taskit GmbH */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= stamp9g20_init_early,
@@ -282,7 +282,7 @@ MACHINE_END
 
 MACHINE_START(STAMP9G20, "taskit Stamp9G20")
 	/* Maintainer: taskit GmbH */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= stamp9g20_init_early,
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index c1060f96e58..2487d944a1b 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -355,7 +355,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(USB_A9263, "CALAO USB_A9263")
 	/* Maintainer: calao-systems */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
@@ -365,7 +365,7 @@ MACHINE_END
 
 MACHINE_START(USB_A9260, "CALAO USB_A9260")
 	/* Maintainer: calao-systems */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
@@ -375,7 +375,7 @@ MACHINE_END
 
 MACHINE_START(USB_A9G20, "CALAO USB_A92G0")
 	/* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */
-	.timer		= &at91sam926x_timer,
+	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 8673aebcb85..be083771df2 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -587,7 +587,7 @@ static void __init yl9200_board_init(void)
 
 MACHINE_START(YL9200, "uCdragon YL-9200")
 	/* Maintainer: S.Birtles */
-	.timer		= &at91rm9200_timer,
+	.init_time	= at91rm9200_timer_init,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= yl9200_init_early,
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index fc593d615e7..78ab0654865 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -36,12 +36,11 @@ extern int  __init at91_aic5_of_init(struct device_node *node,
 
 
  /* Timer */
-struct sys_timer;
 extern void at91rm9200_ioremap_st(u32 addr);
-extern struct sys_timer at91rm9200_timer;
+extern void at91rm9200_timer_init(void);
 extern void at91sam926x_ioremap_pit(u32 addr);
-extern struct sys_timer at91sam926x_timer;
-extern struct sys_timer at91x40_timer;
+extern void at91sam926x_pit_init(void);
+extern void at91x40_timer_init(void);
 
  /* Clocks */
 #ifdef CONFIG_AT91_PMC_UNIT
diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h
index 97ad68a826f..5659f7c7212 100644
--- a/arch/arm/mach-at91/include/mach/uncompress.h
+++ b/arch/arm/mach-at91/include/mach/uncompress.h
@@ -196,6 +196,4 @@ static inline void flush(void)
 		barrier();
 }
 
-#define arch_decomp_wdog()
-
 #endif