diff options
| author | Andrew Victor <andrew@sanpeople.com> | 2006-09-27 13:23:00 +0100 |
|---|---|---|
| committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2006-09-28 11:53:47 +0100 |
| commit | f21738341ca330ec83ef978ee63ffa5ecf13f082 (patch) | |
| tree | be42abeb9ef2509a5a0c4187f4aa076d8f3c2dee /arch/arm/mach-at91rm9200/board-1arm.c | |
| parent | 2eeaaa21de68cb8869d3a54438a9224321d3dd03 (diff) | |
[ARM] 3867/1: AT91 GPIO update
This patch makes the AT91 gpio.c support processor-generic (AT91RM9200
and AT91SAM9xxx). The GPIO controllers supported by a particular AT91
processor are defined in the processor-specific file and are registered
with gpio.c at startup.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/mach-at91rm9200/board-1arm.c')
| -rw-r--r-- | arch/arm/mach-at91rm9200/board-1arm.c | 15 |
1 files changed, 6 insertions, 9 deletions
diff --git a/arch/arm/mach-at91rm9200/board-1arm.c b/arch/arm/mach-at91rm9200/board-1arm.c index d2aa9c4a8b2..36eecd7161f 100644 --- a/arch/arm/mach-at91rm9200/board-1arm.c +++ b/arch/arm/mach-at91rm9200/board-1arm.c @@ -39,14 +39,6 @@ #include "generic.h" -static void __init onearm_init_irq(void) -{ - /* Initialize AIC controller */ - at91rm9200_init_irq(NULL); - - /* Set up the GPIO interrupts */ - at91_gpio_irq_setup(PQFP_GPIO_BANKS); -} /* * Serial port configuration. @@ -62,12 +54,17 @@ static struct at91_uart_config __initdata onearm_uart_config = { static void __init onearm_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91rm9200_initialize(18432000, AT91RM9200_PQFP); /* Setup the serial ports and console */ at91_init_serial(&onearm_uart_config); } +static void __init onearm_init_irq(void) +{ + at91rm9200_init_interrupts(NULL); +} + static struct at91_eth_data __initdata onearm_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, |