Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits)
  davinci: DM644x EVM: register MUSB device earlier
  davinci: add spi devices on tnetv107x evm
  davinci: add ssp config for tnetv107x evm board
  davinci: add tnetv107x ssp platform device
  spi: add ti-ssp spi master driver
  mfd: add driver for sequencer serial port
  ARM: EXYNOS4: Implement Clock gating for System MMU
  ARM: EXYNOS4: Enhancement of System MMU driver
  ARM: EXYNOS4: Add support for gpio interrupts
  ARM: S5P: Add function to register gpio interrupt bank data
  ARM: S5P: Cleanup S5P gpio interrupt code
  ARM: EXYNOS4: Add missing GPYx banks
  ARM: S3C64XX: Fix section mismatch from cpufreq init
  ARM: EXYNOS4: Add keypad device to the SMDKV310
  ARM: EXYNOS4: Update clocks for keypad
  ARM: EXYNOS4: Update keypad base address
  ARM: EXYNOS4: Add keypad device helpers
  ARM: EXYNOS4: Add support for SATA on ARMLEX4210
  plat-nomadik: make GPIO interrupts work with cpuidle ApSleep
  mach-u300: define a dummy filter function for coh901318
  ...

Fix up various conflicts in
 - arch/arm/mach-exynos4/cpufreq.c
 - arch/arm/mach-mxs/gpio.c
 - drivers/net/Kconfig
 - drivers/tty/serial/Kconfig
 - drivers/tty/serial/Makefile
 - drivers/usb/gadget/fsl_mxc_udc.c
 - drivers/video/Kconfig

1 files changed, 90 insertions, 6 deletions

diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index b01fb2ab944..a7b41bf505f 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -29,6 +29,8 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/tps6507x.h>
 #include <linux/input/tps6507x-ts.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -38,6 +40,7 @@
 #include <mach/nand.h>
 #include <mach/mux.h>
 #include <mach/aemif.h>
+#include <mach/spi.h>
 
 #define DA850_EVM_PHY_ID		"0:00"
 #define DA850_LCD_PWR_PIN		GPIO_TO_PIN(2, 8)
@@ -48,6 +51,70 @@
 
 #define DA850_MII_MDIO_CLKEN_PIN	GPIO_TO_PIN(2, 6)
 
+static struct mtd_partition da850evm_spiflash_part[] = {
+	[0] = {
+		.name = "UBL",
+		.offset = 0,
+		.size = SZ_64K,
+		.mask_flags = MTD_WRITEABLE,
+	},
+	[1] = {
+		.name = "U-Boot",
+		.offset = MTDPART_OFS_APPEND,
+		.size = SZ_512K,
+		.mask_flags = MTD_WRITEABLE,
+	},
+	[2] = {
+		.name = "U-Boot-Env",
+		.offset = MTDPART_OFS_APPEND,
+		.size = SZ_64K,
+		.mask_flags = MTD_WRITEABLE,
+	},
+	[3] = {
+		.name = "Kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = SZ_2M + SZ_512K,
+		.mask_flags = 0,
+	},
+	[4] = {
+		.name = "Filesystem",
+		.offset = MTDPART_OFS_APPEND,
+		.size = SZ_4M,
+		.mask_flags = 0,
+	},
+	[5] = {
+		.name = "MAC-Address",
+		.offset = SZ_8M - SZ_64K,
+		.size = SZ_64K,
+		.mask_flags = MTD_WRITEABLE,
+	},
+};
+
+static struct flash_platform_data da850evm_spiflash_data = {
+	.name		= "m25p80",
+	.parts		= da850evm_spiflash_part,
+	.nr_parts	= ARRAY_SIZE(da850evm_spiflash_part),
+	.type		= "m25p64",
+};
+
+static struct davinci_spi_config da850evm_spiflash_cfg = {
+	.io_type	= SPI_IO_TYPE_DMA,
+	.c2tdelay	= 8,
+	.t2cdelay	= 8,
+};
+
+static struct spi_board_info da850evm_spi_info[] = {
+	{
+		.modalias		= "m25p80",
+		.platform_data		= &da850evm_spiflash_data,
+		.controller_data	= &da850evm_spiflash_cfg,
+		.mode			= SPI_MODE_0,
+		.max_speed_hz		= 30000000,
+		.bus_num		= 1,
+		.chip_select		= 0,
+	},
+};
+
 static struct mtd_partition da850_evm_norflash_partition[] = {
 	{
 		.name           = "bootloaders + env",
@@ -231,8 +298,6 @@ static const short da850_evm_nor_pins[] = {
 	-1
 };
 
-static u32 ui_card_detected;
-
 #if defined(CONFIG_MMC_DAVINCI) || \
     defined(CONFIG_MMC_DAVINCI_MODULE)
 #define HAS_MMC 1
@@ -244,7 +309,7 @@ static inline void da850_evm_setup_nor_nand(void)
 {
 	int ret = 0;
 
-	if (ui_card_detected & !HAS_MMC) {
+	if (!HAS_MMC) {
 		ret = davinci_cfg_reg_list(da850_evm_nand_pins);
 		if (ret)
 			pr_warning("da850_evm_init: nand mux setup failed: "
@@ -394,7 +459,6 @@ static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
 		goto exp_setup_keys_fail;
 	}
 
-	ui_card_detected = 1;
 	pr_info("DA850/OMAP-L138 EVM UI card detected\n");
 
 	da850_evm_setup_nor_nand();
@@ -664,6 +728,13 @@ static struct snd_platform_data da850_evm_snd_data = {
 	.rxnumevt	= 1,
 };
 
+static const short da850_evm_mcasp_pins[] __initconst = {
+	DA850_AHCLKX, DA850_ACLKX, DA850_AFSX,
+	DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE,
+	DA850_AXR_11, DA850_AXR_12,
+	-1
+};
+
 static int da850_evm_mmc_get_ro(int index)
 {
 	return gpio_get_value(DA850_MMCSD_WP_PIN);
@@ -683,6 +754,13 @@ static struct davinci_mmc_config da850_mmc_config = {
 	.version	= MMC_CTLR_VERSION_2,
 };
 
+static const short da850_evm_mmcsd0_pins[] __initconst = {
+	DA850_MMCSD0_DAT_0, DA850_MMCSD0_DAT_1, DA850_MMCSD0_DAT_2,
+	DA850_MMCSD0_DAT_3, DA850_MMCSD0_CLK, DA850_MMCSD0_CMD,
+	DA850_GPIO4_0, DA850_GPIO4_1,
+	-1
+};
+
 static void da850_panel_power_ctrl(int val)
 {
 	/* lcd backlight */
@@ -1070,7 +1148,7 @@ static __init void da850_evm_init(void)
 				ret);
 
 	if (HAS_MMC) {
-		ret = davinci_cfg_reg_list(da850_mmcsd0_pins);
+		ret = davinci_cfg_reg_list(da850_evm_mmcsd0_pins);
 		if (ret)
 			pr_warning("da850_evm_init: mmcsd0 mux setup failed:"
 					" %d\n", ret);
@@ -1106,7 +1184,7 @@ static __init void da850_evm_init(void)
 	__raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30);
 	__raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30);
 
-	ret = davinci_cfg_reg_list(da850_mcasp_pins);
+	ret = davinci_cfg_reg_list(da850_evm_mcasp_pins);
 	if (ret)
 		pr_warning("da850_evm_init: mcasp mux setup failed: %d\n",
 				ret);
@@ -1153,6 +1231,12 @@ static __init void da850_evm_init(void)
 	if (ret)
 		pr_warning("da850_evm_init: suspend registration failed: %d\n",
 				ret);
+
+	ret = da8xx_register_spi(1, da850evm_spi_info,
+				 ARRAY_SIZE(da850evm_spi_info));
+	if (ret)
+		pr_warning("da850_evm_init: spi 1 registration failed: %d\n",
+				ret);
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE