davinci: MMC platform support

Add SoC and platform-specific data and init for MMC driver.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

1 files changed, 28 insertions, 0 deletions

diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index 22f16f38a0b..d4562f5ff93 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -35,6 +35,7 @@
 #include <mach/i2c.h>
 #include <mach/serial.h>
 #include <mach/nand.h>
+#include <mach/mmc.h>
 
 #define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
@@ -190,6 +191,30 @@ static void __init dm355_leopard_map_io(void)
 	dm355_init();
 }
 
+static int dm355leopard_mmc_get_cd(int module)
+{
+	if (!gpio_is_valid(leopard_mmc_gpio))
+		return -ENXIO;
+	/* low == card present */
+	return !gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 1);
+}
+
+static int dm355leopard_mmc_get_ro(int module)
+{
+	if (!gpio_is_valid(leopard_mmc_gpio))
+		return -ENXIO;
+	/* high == card's write protect switch active */
+	return gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 0);
+}
+
+static struct davinci_mmc_config dm355leopard_mmc_config = {
+	.get_cd		= dm355leopard_mmc_get_cd,
+	.get_ro		= dm355leopard_mmc_get_ro,
+	.wires		= 4,
+	.max_freq       = 50000000,
+	.caps           = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+};
+
 /* Don't connect anything to J10 unless you're only using USB host
  * mode *and* have to do so with some kind of gender-bender.  If
  * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
@@ -248,6 +273,9 @@ static __init void dm355_leopard_init(void)
 	/* irlml6401 switches over 1A in under 8 msec */
 	setup_usb(500, 8);
 
+	davinci_setup_mmc(0, &dm355leopard_mmc_config);
+	davinci_setup_mmc(1, &dm355leopard_mmc_config);
+
 	dm355_init_spi0(BIT(0), dm355_leopard_spi_info,
 			ARRAY_SIZE(dm355_leopard_spi_info));
 }