Merge branch 'linus' into x86/urgent

Merge reason: Bring in changes that the next patch will depend on.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 410 insertions, 0 deletions

diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 8657e72debc..24e0e13b149 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -34,6 +34,8 @@
 #include <linux/i2c/pcf857x.h>
 #include <linux/etherdevice.h>
 
+#include <media/tvp514x.h>
+
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -48,13 +50,89 @@
 #include <mach/mmc.h>
 #include <mach/emac.h>
 
+#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+    defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+#define HAS_ATA 1
+#else
+#define HAS_ATA 0
+#endif
+
+/* CPLD Register 0 bits to control ATA */
+#define DM646X_EVM_ATA_RST		BIT(0)
+#define DM646X_EVM_ATA_PWD		BIT(1)
+
 #define DM646X_EVM_PHY_MASK		(0x2)
 #define DM646X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
 
+#define VIDCLKCTL_OFFSET	(DAVINCI_SYSTEM_MODULE_BASE + 0x38)
+#define VSCLKDIS_OFFSET		(DAVINCI_SYSTEM_MODULE_BASE + 0x6c)
+#define VCH2CLK_MASK		(BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8))
+#define VCH2CLK_SYSCLK8		(BIT(9))
+#define VCH2CLK_AUXCLK		(BIT(9) | BIT(8))
+#define VCH3CLK_MASK		(BIT_MASK(14) | BIT_MASK(13) | BIT_MASK(12))
+#define VCH3CLK_SYSCLK8		(BIT(13))
+#define VCH3CLK_AUXCLK		(BIT(14) | BIT(13))
+
+#define VIDCH2CLK		(BIT(10))
+#define VIDCH3CLK		(BIT(11))
+#define VIDCH1CLK		(BIT(4))
+#define TVP7002_INPUT		(BIT(4))
+#define TVP5147_INPUT		(~BIT(4))
+#define VPIF_INPUT_ONE_CHANNEL	(BIT(5))
+#define VPIF_INPUT_TWO_CHANNEL	(~BIT(5))
+#define TVP5147_CH0		"tvp514x-0"
+#define TVP5147_CH1		"tvp514x-1"
+
+static void __iomem *vpif_vidclkctl_reg;
+static void __iomem *vpif_vsclkdis_reg;
+/* spin lock for updating above registers */
+static spinlock_t vpif_reg_lock;
+
 static struct davinci_uart_config uart_config __initdata = {
 	.enabled_uarts = (1 << 0),
 };
 
+/* CPLD Register 0 Client: used for I/O Control */
+static int cpld_reg0_probe(struct i2c_client *client,
+			   const struct i2c_device_id *id)
+{
+	if (HAS_ATA) {
+		u8 data;
+		struct i2c_msg msg[2] = {
+			{
+				.addr = client->addr,
+				.flags = I2C_M_RD,
+				.len = 1,
+				.buf = &data,
+			},
+			{
+				.addr = client->addr,
+				.flags = 0,
+				.len = 1,
+				.buf = &data,
+			},
+		};
+
+		/* Clear ATA_RSTn and ATA_PWD bits to enable ATA operation. */
+		i2c_transfer(client->adapter, msg, 1);
+		data &= ~(DM646X_EVM_ATA_RST | DM646X_EVM_ATA_PWD);
+		i2c_transfer(client->adapter, msg + 1, 1);
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id cpld_reg_ids[] = {
+	{ "cpld_reg0", 0, },
+	{ },
+};
+
+static struct i2c_driver dm6467evm_cpld_driver = {
+	.driver.name	= "cpld_reg0",
+	.id_table	= cpld_reg_ids,
+	.probe		= cpld_reg0_probe,
+};
+
 /* LEDS */
 
 static struct gpio_led evm_leds[] = {
@@ -206,6 +284,69 @@ static struct at24_platform_data eeprom_info = {
 	.context	= (void *)0x7f00,
 };
 
+static u8 dm646x_iis_serializer_direction[] = {
+       TX_MODE, RX_MODE, INACTIVE_MODE, INACTIVE_MODE,
+};
+
+static u8 dm646x_dit_serializer_direction[] = {
+       TX_MODE,
+};
+
+static struct snd_platform_data dm646x_evm_snd_data[] = {
+	{
+		.tx_dma_offset  = 0x400,
+		.rx_dma_offset  = 0x400,
+		.op_mode        = DAVINCI_MCASP_IIS_MODE,
+		.num_serializer = ARRAY_SIZE(dm646x_iis_serializer_direction),
+		.tdm_slots      = 2,
+		.serial_dir     = dm646x_iis_serializer_direction,
+		.eventq_no      = EVENTQ_0,
+	},
+	{
+		.tx_dma_offset  = 0x400,
+		.rx_dma_offset  = 0,
+		.op_mode        = DAVINCI_MCASP_DIT_MODE,
+		.num_serializer = ARRAY_SIZE(dm646x_dit_serializer_direction),
+		.tdm_slots      = 32,
+		.serial_dir     = dm646x_dit_serializer_direction,
+		.eventq_no      = EVENTQ_0,
+	},
+};
+
+static struct i2c_client *cpld_client;
+
+static int cpld_video_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	cpld_client = client;
+	return 0;
+}
+
+static int __devexit cpld_video_remove(struct i2c_client *client)
+{
+	cpld_client = NULL;
+	return 0;
+}
+
+static const struct i2c_device_id cpld_video_id[] = {
+	{ "cpld_video", 0 },
+	{ }
+};
+
+static struct i2c_driver cpld_video_driver = {
+	.driver = {
+		.name	= "cpld_video",
+	},
+	.probe		= cpld_video_probe,
+	.remove		= cpld_video_remove,
+	.id_table	= cpld_video_id,
+};
+
+static void evm_init_cpld(void)
+{
+	i2c_add_driver(&cpld_video_driver);
+}
+
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
@@ -215,6 +356,15 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 		I2C_BOARD_INFO("pcf8574a", 0x38),
 		.platform_data	= &pcf_data,
 	},
+	{
+		I2C_BOARD_INFO("cpld_reg0", 0x3a),
+	},
+	{
+		I2C_BOARD_INFO("tlv320aic33", 0x18),
+	},
+	{
+		I2C_BOARD_INFO("cpld_video", 0x3b),
+	},
 };
 
 static struct davinci_i2c_platform_data i2c_pdata = {
@@ -222,10 +372,265 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay      = 0 /* usec */,
 };
 
+static int set_vpif_clock(int mux_mode, int hd)
+{
+	unsigned long flags;
+	unsigned int value;
+	int val = 0;
+	int err = 0;
+
+	if (!vpif_vidclkctl_reg || !vpif_vsclkdis_reg || !cpld_client)
+		return -ENXIO;
+
+	/* disable the clock */
+	spin_lock_irqsave(&vpif_reg_lock, flags);
+	value = __raw_readl(vpif_vsclkdis_reg);
+	value |= (VIDCH3CLK | VIDCH2CLK);
+	__raw_writel(value, vpif_vsclkdis_reg);
+	spin_unlock_irqrestore(&vpif_reg_lock, flags);
+
+	val = i2c_smbus_read_byte(cpld_client);
+	if (val < 0)
+		return val;
+
+	if (mux_mode == 1)
+		val &= ~0x40;
+	else
+		val |= 0x40;
+
+	err = i2c_smbus_write_byte(cpld_client, val);
+	if (err)
+		return err;
+
+	value = __raw_readl(vpif_vidclkctl_reg);
+	value &= ~(VCH2CLK_MASK);
+	value &= ~(VCH3CLK_MASK);
+
+	if (hd >= 1)
+		value |= (VCH2CLK_SYSCLK8 | VCH3CLK_SYSCLK8);
+	else
+		value |= (VCH2CLK_AUXCLK | VCH3CLK_AUXCLK);
+
+	__raw_writel(value, vpif_vidclkctl_reg);
+
+	spin_lock_irqsave(&vpif_reg_lock, flags);
+	value = __raw_readl(vpif_vsclkdis_reg);
+	/* enable the clock */
+	value &= ~(VIDCH3CLK | VIDCH2CLK);
+	__raw_writel(value, vpif_vsclkdis_reg);
+	spin_unlock_irqrestore(&vpif_reg_lock, flags);
+
+	return 0;
+}
+
+static struct vpif_subdev_info dm646x_vpif_subdev[] = {
+	{
+		.name	= "adv7343",
+		.board_info = {
+			I2C_BOARD_INFO("adv7343", 0x2a),
+		},
+	},
+	{
+		.name	= "ths7303",
+		.board_info = {
+			I2C_BOARD_INFO("ths7303", 0x2c),
+		},
+	},
+};
+
+static const char *output[] = {
+	"Composite",
+	"Component",
+	"S-Video",
+};
+
+static struct vpif_display_config dm646x_vpif_display_config = {
+	.set_clock	= set_vpif_clock,
+	.subdevinfo	= dm646x_vpif_subdev,
+	.subdev_count	= ARRAY_SIZE(dm646x_vpif_subdev),
+	.output		= output,
+	.output_count	= ARRAY_SIZE(output),
+	.card_name	= "DM646x EVM",
+};
+
+/**
+ * setup_vpif_input_path()
+ * @channel: channel id (0 - CH0, 1 - CH1)
+ * @sub_dev_name: ptr sub device name
+ *
+ * This will set vpif input to capture data from tvp514x or
+ * tvp7002.
+ */
+static int setup_vpif_input_path(int channel, const char *sub_dev_name)
+{
+	int err = 0;
+	int val;
+
+	/* for channel 1, we don't do anything */
+	if (channel != 0)
+		return 0;
+
+	if (!cpld_client)
+		return -ENXIO;
+
+	val = i2c_smbus_read_byte(cpld_client);
+	if (val < 0)
+		return val;
+
+	if (!strcmp(sub_dev_name, TVP5147_CH0) ||
+	    !strcmp(sub_dev_name, TVP5147_CH1))
+		val &= TVP5147_INPUT;
+	else
+		val |= TVP7002_INPUT;
+
+	err = i2c_smbus_write_byte(cpld_client, val);
+	if (err)
+		return err;
+	return 0;
+}
+
+/**
+ * setup_vpif_input_channel_mode()
+ * @mux_mode:  mux mode. 0 - 1 channel or (1) - 2 channel
+ *
+ * This will setup input mode to one channel (TVP7002) or 2 channel (TVP5147)
+ */
+static int setup_vpif_input_channel_mode(int mux_mode)
+{
+	unsigned long flags;
+	int err = 0;
+	int val;
+	u32 value;
+
+	if (!vpif_vsclkdis_reg || !cpld_client)
+		return -ENXIO;
+
+	val = i2c_smbus_read_byte(cpld_client);
+	if (val < 0)
+		return val;
+
+	spin_lock_irqsave(&vpif_reg_lock, flags);
+	value = __raw_readl(vpif_vsclkdis_reg);
+	if (mux_mode) {
+		val &= VPIF_INPUT_TWO_CHANNEL;
+		value |= VIDCH1CLK;
+	} else {
+		val |= VPIF_INPUT_ONE_CHANNEL;
+		value &= ~VIDCH1CLK;
+	}
+	__raw_writel(value, vpif_vsclkdis_reg);
+	spin_unlock_irqrestore(&vpif_reg_lock, flags);
+
+	err = i2c_smbus_write_byte(cpld_client, val);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static struct tvp514x_platform_data tvp5146_pdata = {
+	.clk_polarity = 0,
+	.hs_polarity = 1,
+	.vs_polarity = 1
+};
+
+#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
+
+static struct vpif_subdev_info vpif_capture_sdev_info[] = {
+	{
+		.name	= TVP5147_CH0,
+		.board_info = {
+			I2C_BOARD_INFO("tvp5146", 0x5d),
+			.platform_data = &tvp5146_pdata,
+		},
+		.input = INPUT_CVBS_VI2B,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+		.can_route = 1,
+		.vpif_if = {
+			.if_type = VPIF_IF_BT656,
+			.hd_pol = 1,
+			.vd_pol = 1,
+			.fid_pol = 0,
+		},
+	},
+	{
+		.name	= TVP5147_CH1,
+		.board_info = {
+			I2C_BOARD_INFO("tvp5146", 0x5c),
+			.platform_data = &tvp5146_pdata,
+		},
+		.input = INPUT_SVIDEO_VI2C_VI1C,
+		.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+		.can_route = 1,
+		.vpif_if = {
+			.if_type = VPIF_IF_BT656,
+			.hd_pol = 1,
+			.vd_pol = 1,
+			.fid_pol = 0,
+		},
+	},
+};
+
+static const struct vpif_input dm6467_ch0_inputs[] = {
+	{
+		.input = {
+			.index = 0,
+			.name = "Composite",
+			.type = V4L2_INPUT_TYPE_CAMERA,
+			.std = TVP514X_STD_ALL,
+		},
+		.subdev_name = TVP5147_CH0,
+	},
+};
+
+static const struct vpif_input dm6467_ch1_inputs[] = {
+       {
+		.input = {
+			.index = 0,
+			.name = "S-Video",
+			.type = V4L2_INPUT_TYPE_CAMERA,
+			.std = TVP514X_STD_ALL,
+		},
+		.subdev_name = TVP5147_CH1,
+	},
+};
+
+static struct vpif_capture_config dm646x_vpif_capture_cfg = {
+	.setup_input_path = setup_vpif_input_path,
+	.setup_input_channel_mode = setup_vpif_input_channel_mode,
+	.subdev_info = vpif_capture_sdev_info,
+	.subdev_count = ARRAY_SIZE(vpif_capture_sdev_info),
+	.chan_config[0] = {
+		.inputs = dm6467_ch0_inputs,
+		.input_count = ARRAY_SIZE(dm6467_ch0_inputs),
+	},
+	.chan_config[1] = {
+		.inputs = dm6467_ch1_inputs,
+		.input_count = ARRAY_SIZE(dm6467_ch1_inputs),
+	},
+};
+
+static void __init evm_init_video(void)
+{
+	vpif_vidclkctl_reg = ioremap(VIDCLKCTL_OFFSET, 4);
+	vpif_vsclkdis_reg = ioremap(VSCLKDIS_OFFSET, 4);
+	if (!vpif_vidclkctl_reg || !vpif_vsclkdis_reg) {
+		pr_err("Can't map VPIF VIDCLKCTL or VSCLKDIS registers\n");
+		return;
+	}
+	spin_lock_init(&vpif_reg_lock);
+
+	dm646x_setup_vpif(&dm646x_vpif_display_config,
+			  &dm646x_vpif_capture_cfg);
+}
+
 static void __init evm_init_i2c(void)
 {
 	davinci_init_i2c(&i2c_pdata);
+	i2c_add_driver(&dm6467evm_cpld_driver);
 	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+	evm_init_cpld();
+	evm_init_video();
 }
 
 static void __init davinci_map_io(void)
@@ -239,6 +644,11 @@ static __init void evm_init(void)
 
 	evm_init_i2c();
 	davinci_serial_init(&uart_config);
+	dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
+	dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
+
+	if (HAS_ATA)
+		dm646x_init_ide();
 
 	soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK;
 	soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY;