ARM: davinci: remove tnetv107x support

The tnetv107x support does not compile, and seems to have been broken
for a while with nobody caring to fix it. So far everyone I asked
said it's probably dead and completely unused and will never again
be needed in a future kernel release, so let's delete it.

If someone finds a use for this code later and is able to get it
to work again, we can always revert the removal.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Kevin Hilman <khilman@linaro.org>

1 files changed, 0 insertions, 287 deletions

diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
deleted file mode 100644
index 78ea395d2ac..00000000000
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- * Texas Instruments TNETV107X EVM Board Support
- *
- * Copyright (C) 2010 Texas Instruments
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/ratelimit.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/spi/spi.h>
-#include <linux/platform_data/edma.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/irqs.h>
-#include <mach/mux.h>
-#include <mach/cp_intc.h>
-#include <mach/tnetv107x.h>
-
-#define EVM_MMC_WP_GPIO		21
-#define EVM_MMC_CD_GPIO		24
-#define EVM_SPI_CS_GPIO		54
-
-static int initialize_gpio(int gpio, char *desc)
-{
-	int ret;
-
-	ret = gpio_request(gpio, desc);
-	if (ret < 0) {
-		pr_err_ratelimited("cannot open %s gpio\n", desc);
-		return -ENOSYS;
-	}
-	gpio_direction_input(gpio);
-	return gpio;
-}
-
-static int mmc_get_cd(int index)
-{
-	static int gpio;
-
-	if (!gpio)
-		gpio = initialize_gpio(EVM_MMC_CD_GPIO, "mmc card detect");
-
-	if (gpio < 0)
-		return gpio;
-
-	return gpio_get_value(gpio) ? 0 : 1;
-}
-
-static int mmc_get_ro(int index)
-{
-	static int gpio;
-
-	if (!gpio)
-		gpio = initialize_gpio(EVM_MMC_WP_GPIO, "mmc write protect");
-
-	if (gpio < 0)
-		return gpio;
-
-	return gpio_get_value(gpio) ? 1 : 0;
-}
-
-static struct davinci_mmc_config mmc_config = {
-	.get_cd		= mmc_get_cd,
-	.get_ro		= mmc_get_ro,
-	.wires		= 4,
-	.max_freq	= 50000000,
-	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-};
-
-static const short sdio1_pins[] __initconst = {
-	TNETV107X_SDIO1_CLK_1,		TNETV107X_SDIO1_CMD_1,
-	TNETV107X_SDIO1_DATA0_1,	TNETV107X_SDIO1_DATA1_1,
-	TNETV107X_SDIO1_DATA2_1,	TNETV107X_SDIO1_DATA3_1,
-	TNETV107X_GPIO21,		TNETV107X_GPIO24,
-	-1
-};
-
-static const short uart1_pins[] __initconst = {
-	TNETV107X_UART1_RD,		TNETV107X_UART1_TD,
-	-1
-};
-
-static const short ssp_pins[] __initconst = {
-	TNETV107X_SSP0_0, TNETV107X_SSP0_1, TNETV107X_SSP0_2,
-	TNETV107X_SSP1_0, TNETV107X_SSP1_1, TNETV107X_SSP1_2,
-	TNETV107X_SSP1_3, -1
-};
-
-static struct mtd_partition nand_partitions[] = {
-	/* bootloader (U-Boot, etc) in first 12 sectors */
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= (12*SZ_128K),
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	/* bootloader params in the next sector */
-	{
-		.name		= "params",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= SZ_128K,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	/* kernel */
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	},
-	/* file system */
-	{
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_NXTBLK,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	}
-};
-
-static struct davinci_nand_pdata nand_config = {
-	.mask_cle	= 0x4000,
-	.mask_ale	= 0x2000,
-	.parts		= nand_partitions,
-	.nr_parts	= ARRAY_SIZE(nand_partitions),
-	.ecc_mode	= NAND_ECC_HW,
-	.bbt_options	= NAND_BBT_USE_FLASH,
-	.ecc_bits	= 1,
-};
-
-static struct davinci_uart_config serial_config __initconst = {
-	.enabled_uarts	= BIT(1),
-};
-
-static const uint32_t keymap[] = {
-	KEY(0, 0, KEY_NUMERIC_1),
-	KEY(0, 1, KEY_NUMERIC_2),
-	KEY(0, 2, KEY_NUMERIC_3),
-	KEY(0, 3, KEY_FN_F1),
-	KEY(0, 4, KEY_MENU),
-
-	KEY(1, 0, KEY_NUMERIC_4),
-	KEY(1, 1, KEY_NUMERIC_5),
-	KEY(1, 2, KEY_NUMERIC_6),
-	KEY(1, 3, KEY_UP),
-	KEY(1, 4, KEY_FN_F2),
-
-	KEY(2, 0, KEY_NUMERIC_7),
-	KEY(2, 1, KEY_NUMERIC_8),
-	KEY(2, 2, KEY_NUMERIC_9),
-	KEY(2, 3, KEY_LEFT),
-	KEY(2, 4, KEY_ENTER),
-
-	KEY(3, 0, KEY_NUMERIC_STAR),
-	KEY(3, 1, KEY_NUMERIC_0),
-	KEY(3, 2, KEY_NUMERIC_POUND),
-	KEY(3, 3, KEY_DOWN),
-	KEY(3, 4, KEY_RIGHT),
-
-	KEY(4, 0, KEY_FN_F3),
-	KEY(4, 1, KEY_FN_F4),
-	KEY(4, 2, KEY_MUTE),
-	KEY(4, 3, KEY_HOME),
-	KEY(4, 4, KEY_BACK),
-
-	KEY(5, 0, KEY_VOLUMEDOWN),
-	KEY(5, 1, KEY_VOLUMEUP),
-	KEY(5, 2, KEY_F1),
-	KEY(5, 3, KEY_F2),
-	KEY(5, 4, KEY_F3),
-};
-
-static const struct matrix_keymap_data keymap_data = {
-	.keymap		= keymap,
-	.keymap_size	= ARRAY_SIZE(keymap),
-};
-
-static struct matrix_keypad_platform_data keypad_config = {
-	.keymap_data	= &keymap_data,
-	.num_row_gpios	= 6,
-	.num_col_gpios	= 5,
-	.debounce_ms	= 0, /* minimum */
-	.active_low	= 0, /* pull up realization */
-	.no_autorepeat	= 0,
-};
-
-static void spi_select_device(int cs)
-{
-	static int gpio;
-
-	if (!gpio) {
-		int ret;
-		ret = gpio_request(EVM_SPI_CS_GPIO, "spi chipsel");
-		if (ret < 0) {
-			pr_err("cannot open spi chipsel gpio\n");
-			gpio = -ENOSYS;
-			return;
-		} else {
-			gpio = EVM_SPI_CS_GPIO;
-			gpio_direction_output(gpio, 0);
-		}
-	}
-
-	if (gpio < 0)
-		return;
-
-	return gpio_set_value(gpio, cs ? 1 : 0);
-}
-
-static struct ti_ssp_spi_data spi_master_data = {
-	.num_cs	= 2,
-	.select	= spi_select_device,
-	.iosel	= SSP_PIN_SEL(0, SSP_CLOCK)	| SSP_PIN_SEL(1, SSP_DATA) |
-		  SSP_PIN_SEL(2, SSP_CHIPSEL)	| SSP_PIN_SEL(3, SSP_IN)   |
-		  SSP_INPUT_SEL(3),
-};
-
-static struct ti_ssp_data ssp_config = {
-	.out_clock	= 250 * 1000,
-	.dev_data	= {
-		[1] = {
-			.dev_name = "ti-ssp-spi",
-			.pdata = &spi_master_data,
-			.pdata_size = sizeof(spi_master_data),
-		},
-	},
-};
-
-static struct tnetv107x_device_info evm_device_info __initconst = {
-	.serial_config		= &serial_config,
-	.mmc_config[1]		= &mmc_config,	/* controller 1 */
-	.nand_config[0]		= &nand_config,	/* chip select 0 */
-	.keypad_config		= &keypad_config,
-	.ssp_config		= &ssp_config,
-};
-
-static struct spi_board_info spi_info[] __initconst = {
-};
-
-static __init void tnetv107x_evm_board_init(void)
-{
-	davinci_cfg_reg_list(sdio1_pins);
-	davinci_cfg_reg_list(uart1_pins);
-	davinci_cfg_reg_list(ssp_pins);
-
-	tnetv107x_devices_init(&evm_device_info);
-
-	spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static int __init tnetv107x_evm_console_init(void)
-{
-	return add_preferred_console("ttyS", 0, "115200");
-}
-console_initcall(tnetv107x_evm_console_init);
-#endif
-
-MACHINE_START(TNETV107X, "TNETV107X EVM")
-	.atag_offset	= 0x100,
-	.map_io		= tnetv107x_init,
-	.init_irq	= cp_intc_init,
-	.init_time	= davinci_timer_init,
-	.init_machine	= tnetv107x_evm_board_init,
-	.init_late	= davinci_init_late,
-	.dma_zone_size	= SZ_128M,
-	.restart	= tnetv107x_restart,
-MACHINE_END