ARM: EXYNOS: no more support non-DT for EXYNOS SoCs

As we discussed in mailing list, non-DT for EXYNOS SoCs will not be
supported from v3.11. This patch removes regarding files for non-DT
including board files and defconfig.

Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Thomas Abraham <thomas.ab@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

1 files changed, 1 insertions, 319 deletions

diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index ff18fc2ea46..41fd73f4c29 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -84,329 +84,11 @@ config SOC_EXYNOS5440
 	help
 	  Enable EXYNOS5440 SoC support
 
-config EXYNOS_ATAGS
-	bool "ATAGS based boot for EXYNOS (deprecated)"
-	depends on !ARCH_MULTIPLATFORM
-	depends on ATAGS
-	default y
-	help
-	  The EXYNOS platform is moving towards being completely probed
-	  through device tree. This enables support for board files using
-	  the traditional ATAGS boot format.
-	  Note that this option is not available for multiplatform builds.
-
-if EXYNOS_ATAGS
-
-config EXYNOS_DEV_DMA
-	bool
-	help
-	  Compile in amba device definitions for DMA controller
-
-config EXYNOS4_DEV_AHCI
-	bool
-	help
-	  Compile in platform device definitions for AHCI
-
-config EXYNOS4_SETUP_FIMD0
-	bool
-	help
-	  Common setup code for FIMD0.
-
-config EXYNOS4_DEV_USB_OHCI
-	bool
-	help
-	  Compile in platform device definition for USB OHCI
-
-config EXYNOS4_SETUP_I2C1
-	bool
-	help
-	  Common setup code for i2c bus 1.
-
-config EXYNOS4_SETUP_I2C2
-	bool
-	help
-	  Common setup code for i2c bus 2.
-
-config EXYNOS4_SETUP_I2C3
-	bool
-	help
-	  Common setup code for i2c bus 3.
-
-config EXYNOS4_SETUP_I2C4
-	bool
-	help
-	  Common setup code for i2c bus 4.
-
-config EXYNOS4_SETUP_I2C5
-	bool
-	help
-	  Common setup code for i2c bus 5.
-
-config EXYNOS4_SETUP_I2C6
-	bool
-	help
-	  Common setup code for i2c bus 6.
-
-config EXYNOS4_SETUP_I2C7
-	bool
-	help
-	  Common setup code for i2c bus 7.
-
-config EXYNOS4_SETUP_KEYPAD
-	bool
-	help
-	  Common setup code for keypad.
-
-config EXYNOS4_SETUP_SDHCI
-	bool
-	select EXYNOS4_SETUP_SDHCI_GPIO
-	help
-	  Internal helper functions for EXYNOS4 based SDHCI systems.
-
-config EXYNOS4_SETUP_SDHCI_GPIO
-	bool
-	help
-	  Common setup code for SDHCI gpio.
-
-config EXYNOS4_SETUP_FIMC
-	bool
-	help
-	  Common setup code for the camera interfaces.
-
-config EXYNOS4_SETUP_USB_PHY
-	bool
-	help
-	  Common setup code for USB PHY controller
-
-config EXYNOS_SETUP_SPI
-	bool
-	help
-	  Common setup code for SPI GPIO configurations.
-
-# machine support
-
-if ARCH_EXYNOS4
-
-comment "EXYNOS4210 Boards"
-
-config MACH_SMDKC210
-	bool "SMDKC210"
-	select MACH_SMDKV310
-	help
-	  Machine support for Samsung SMDKC210
-
-config MACH_SMDKV310
-	bool "SMDKV310"
-	select CPU_EXYNOS4210
-	select EXYNOS4_DEV_AHCI
-	select EXYNOS4_DEV_USB_OHCI
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_I2C1
-	select EXYNOS4_SETUP_KEYPAD
-	select EXYNOS4_SETUP_SDHCI
-	select EXYNOS4_SETUP_USB_PHY
-	select EXYNOS_DEV_DMA
-	select EXYNOS_DEV_SYSMMU
-	select S3C24XX_PWM
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_HSMMC3
-	select S3C_DEV_I2C1
-	select S3C_DEV_RTC
-	select S3C_DEV_USB_HSOTG
-	select S3C_DEV_WDT
-	select S5P_DEV_FIMC0
-	select S5P_DEV_FIMC1
-	select S5P_DEV_FIMC2
-	select S5P_DEV_FIMC3
-	select S5P_DEV_FIMD0
-	select S5P_DEV_G2D
-	select S5P_DEV_I2C_HDMIPHY
-	select S5P_DEV_JPEG
-	select S5P_DEV_MFC
-	select S5P_DEV_TV
-	select S5P_DEV_USB_EHCI
-	select SAMSUNG_DEV_BACKLIGHT
-	select SAMSUNG_DEV_KEYPAD
-	select SAMSUNG_DEV_PWM
-	help
-	  Machine support for Samsung SMDKV310
-
-config MACH_ARMLEX4210
-	bool "ARMLEX4210"
-	select CPU_EXYNOS4210
-	select EXYNOS4_DEV_AHCI
-	select EXYNOS4_SETUP_SDHCI
-	select EXYNOS_DEV_DMA
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_HSMMC3
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
-	help
-	  Machine support for Samsung ARMLEX4210 based on EXYNOS4210
-
-config MACH_UNIVERSAL_C210
-	bool "Mobile UNIVERSAL_C210 Board"
-	select CLKSRC_MMIO
-	select CLKSRC_SAMSUNG_PWM
-	select CPU_EXYNOS4210
-	select EXYNOS4_SETUP_FIMC
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_I2C1
-	select EXYNOS4_SETUP_I2C3
-	select EXYNOS4_SETUP_I2C5
-	select EXYNOS4_SETUP_SDHCI
-	select EXYNOS4_SETUP_USB_PHY
-	select EXYNOS_DEV_DMA
-	select EXYNOS_DEV_SYSMMU
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_HSMMC3
-	select S3C_DEV_I2C1
-	select S3C_DEV_I2C3
-	select S3C_DEV_I2C5
-	select S3C_DEV_USB_HSOTG
-	select S5P_DEV_CSIS0
-	select S5P_DEV_FIMC0
-	select S5P_DEV_FIMC1
-	select S5P_DEV_FIMC2
-	select S5P_DEV_FIMC3
-	select S5P_DEV_FIMD0
-	select S5P_DEV_G2D
-	select S5P_DEV_I2C_HDMIPHY
-	select S5P_DEV_JPEG
-	select S5P_DEV_MFC
-	select S5P_DEV_ONENAND
-	select S5P_DEV_TV
-	select S5P_GPIO_INT
-	select S5P_SETUP_MIPIPHY
-	help
-	  Machine support for Samsung Mobile Universal S5PC210 Reference
-	  Board.
-
-config MACH_NURI
-	bool "Mobile NURI Board"
-	select CPU_EXYNOS4210
-	select EXYNOS4_SETUP_FIMC
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_I2C1
-	select EXYNOS4_SETUP_I2C3
-	select EXYNOS4_SETUP_I2C5
-	select EXYNOS4_SETUP_I2C6
-	select EXYNOS4_SETUP_SDHCI
-	select EXYNOS4_SETUP_USB_PHY
-	select EXYNOS_DEV_DMA
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_HSMMC3
-	select S3C_DEV_I2C1
-	select S3C_DEV_I2C3
-	select S3C_DEV_I2C5
-	select S3C_DEV_I2C6
-	select S3C_DEV_RTC
-	select S3C_DEV_USB_HSOTG
-	select S3C_DEV_WDT
-	select S5P_DEV_CSIS0
-	select S5P_DEV_FIMC0
-	select S5P_DEV_FIMC1
-	select S5P_DEV_FIMC2
-	select S5P_DEV_FIMC3
-	select S5P_DEV_FIMD0
-	select S5P_DEV_G2D
-	select S5P_DEV_JPEG
-	select S5P_DEV_MFC
-	select S5P_DEV_USB_EHCI
-	select S5P_GPIO_INT
-	select S5P_SETUP_MIPIPHY
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_PWM
-	help
-	  Machine support for Samsung Mobile NURI Board.
-
-config MACH_ORIGEN
-	bool "ORIGEN"
-	select CPU_EXYNOS4210
-	select EXYNOS4_DEV_USB_OHCI
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_SDHCI
-	select EXYNOS4_SETUP_USB_PHY
-	select EXYNOS_DEV_DMA
-	select EXYNOS_DEV_SYSMMU
-	select S3C24XX_PWM
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_RTC
-	select S3C_DEV_USB_HSOTG
-	select S3C_DEV_WDT
-	select S5P_DEV_FIMC0
-	select S5P_DEV_FIMC1
-	select S5P_DEV_FIMC2
-	select S5P_DEV_FIMC3
-	select S5P_DEV_FIMD0
-	select S5P_DEV_G2D
-	select S5P_DEV_I2C_HDMIPHY
-	select S5P_DEV_JPEG
-	select S5P_DEV_MFC
-	select S5P_DEV_TV
-	select S5P_DEV_USB_EHCI
-	select SAMSUNG_DEV_BACKLIGHT
-	select SAMSUNG_DEV_PWM
-	help
-	  Machine support for ORIGEN based on Samsung EXYNOS4210
-
-comment "EXYNOS4212 Boards"
-
-config MACH_SMDK4212
-	bool "SMDK4212"
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_I2C1
-	select EXYNOS4_SETUP_I2C3
-	select EXYNOS4_SETUP_I2C7
-	select EXYNOS4_SETUP_KEYPAD
-	select EXYNOS4_SETUP_SDHCI
-	select EXYNOS4_SETUP_USB_PHY
-	select EXYNOS_DEV_DMA
-	select EXYNOS_DEV_SYSMMU
-	select S3C24XX_PWM
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_HSMMC3
-	select S3C_DEV_I2C1
-	select S3C_DEV_I2C3
-	select S3C_DEV_I2C7
-	select S3C_DEV_RTC
-	select S3C_DEV_USB_HSOTG
-	select S3C_DEV_WDT
-	select S5P_DEV_FIMC0
-	select S5P_DEV_FIMC1
-	select S5P_DEV_FIMC2
-	select S5P_DEV_FIMC3
-	select S5P_DEV_FIMD0
-	select S5P_DEV_MFC
-	select SAMSUNG_DEV_BACKLIGHT
-	select SAMSUNG_DEV_KEYPAD
-	select SAMSUNG_DEV_PWM
-	select SOC_EXYNOS4212
-	help
-	  Machine support for Samsung SMDK4212
-
-comment "EXYNOS4412 Boards"
-
-config MACH_SMDK4412
-	bool "SMDK4412"
-	select MACH_SMDK4212
-	select SOC_EXYNOS4412
-	help
-	  Machine support for Samsung SMDK4412
-endif
-
-endif
-
 comment "Flattened Device Tree based board for EXYNOS SoCs"
 
 config MACH_EXYNOS4_DT
 	bool "Samsung Exynos4 Machine using device tree"
+	default y
 	depends on ARCH_EXYNOS4
 	select ARM_AMBA
 	select CLKSRC_OF