Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc board specific updates from Arnd Bergmann:
 "These changes are all for individual board files.  In the long run,
  those files will largely go away, and the amount of changes appears to
  be continuously decreasing, which is a good sign.  This time around,
  changes are focused on tegra, omap and samsung."

Fix conflicts in arch/arm/mach-{omap2/common-board-devices.c,tegra/Makefile.boot}
as per the 'for-linus' branch.

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
  ARM: EXYNOS: Add leds status1 and status2 on Origen board
  ARM: S3C64XX: Mark most Cragganmore initdata devinitdata
  ARM: EXYNOS: Add missing .reserve field to SMDKC210
  ARM: EXYNOS: Add DRM device to SMDK4X12 board
  ARM: S3C64XX: Clean up after SPI driver platform data updates
  ARM: SAMSUNG: no need to set the value for clk_xusbxti when it is 24Mhz
  ARM: EXYNOS: Add framebuffer support for SMDK4X12
  ARM: EXYNOS: Add HSOTG support to SMDK4X12
  ARM: S5PV210: Add audio platform device in Goni board
  ARM: S5PV210: Add audio platform device in Aquila board
  ARM: EXYNOS: Add audio platform device in SMDKV310 board
  ARM: S3C64XX: Don't specify an irq_base for WM1192-EV1 board
  ARM: OMAP3: Fix omap3evm randconfig error introduced by VBUS support
  ARM: OMAP: board-omap4panda: MUX configuration for sys_nirq2
  ARM: OMAP: board-4430sdp: MUX configuration for sys_nirq2
  ARM: OMAP3530evm: set pendown_state and debounce time for ads7846
  ARM: omap3evm: enable VBUS switch for EHCI tranceiver
  ARM: OMAP3EVM: Adding USB internal LDOs board file
  ARM: OMAP3EVM: Add NAND flash definition
  ARM: OMAP3: cm-t35: add tvp5150 decoder support
  ...

1 files changed, 77 insertions, 6 deletions

diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index fb09c70e195..b26beb13ebe 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -13,12 +13,14 @@
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/io.h>
+#include <linux/lcd.h>
 #include <linux/mfd/max8997.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
 #include <linux/pwm_backlight.h>
 #include <linux/regulator/machine.h>
 #include <linux/serial_core.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -28,15 +30,18 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/fb.h>
 #include <plat/gpio-cfg.h>
 #include <plat/iic.h>
 #include <plat/keypad.h>
 #include <plat/mfc.h>
+#include <plat/regs-fb.h>
 #include <plat/regs-serial.h>
 #include <plat/sdhci.h>
 
 #include <mach/map.h>
 
+#include <drm/exynos_drm.h>
 #include "common.h"
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
@@ -219,8 +224,10 @@ static struct platform_pwm_backlight_data smdk4x12_bl_data = {
 
 static uint32_t smdk4x12_keymap[] __initdata = {
 	/* KEY(row, col, keycode) */
-	KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B),
-	KEY(1, 3, KEY_E), KEY(1, 4, KEY_C)
+	KEY(1, 3, KEY_1), KEY(1, 4, KEY_2), KEY(1, 5, KEY_3),
+	KEY(1, 6, KEY_4), KEY(1, 7, KEY_5),
+	KEY(2, 5, KEY_D), KEY(2, 6, KEY_A), KEY(2, 7, KEY_B),
+	KEY(0, 7, KEY_E), KEY(0, 5, KEY_C)
 };
 
 static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
@@ -230,10 +237,62 @@ static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
 
 static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
 	.keymap_data	= &smdk4x12_keymap_data,
-	.rows		= 2,
-	.cols		= 5,
+	.rows		= 3,
+	.cols		= 8,
 };
 
+#ifdef CONFIG_DRM_EXYNOS
+static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
+	.panel	= {
+		.timing	= {
+			.left_margin	= 8,
+			.right_margin	= 8,
+			.upper_margin	= 6,
+			.lower_margin	= 6,
+			.hsync_len	= 6,
+			.vsync_len	= 4,
+			.xres		= 480,
+			.yres		= 800,
+		},
+	},
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.default_win	= 0,
+	.bpp		= 32,
+};
+#else
+static struct s3c_fb_pd_win smdk4x12_fb_win0 = {
+	.xres		= 480,
+	.yres		= 800,
+	.virtual_x	= 480,
+	.virtual_y	= 800 * 2,
+	.max_bpp	= 32,
+	.default_bpp	= 24,
+};
+
+static struct fb_videomode smdk4x12_lcd_timing = {
+	.left_margin	= 8,
+	.right_margin	= 8,
+	.upper_margin	= 6,
+	.lower_margin	= 6,
+	.hsync_len	= 6,
+	.vsync_len	= 4,
+	.xres		= 480,
+	.yres		= 800,
+};
+
+static struct s3c_fb_platdata smdk4x12_lcd_pdata __initdata = {
+	.win[0]		= &smdk4x12_fb_win0,
+	.vtiming	= &smdk4x12_lcd_timing,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
+};
+#endif
+
+/* USB OTG */
+static struct s3c_hsotg_plat smdk4x12_hsotg_pdata;
+
 static struct platform_device *smdk4x12_devices[] __initdata = {
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
@@ -242,22 +301,25 @@ static struct platform_device *smdk4x12_devices[] __initdata = {
 	&s3c_device_i2c3,
 	&s3c_device_i2c7,
 	&s3c_device_rtc,
+	&s3c_device_usb_hsotg,
 	&s3c_device_wdt,
 	&s5p_device_fimc0,
 	&s5p_device_fimc1,
 	&s5p_device_fimc2,
 	&s5p_device_fimc3,
 	&s5p_device_fimc_md,
+	&s5p_device_fimd0,
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
+#ifdef CONFIG_DRM_EXYNOS
+	&exynos_device_drm,
+#endif
 	&samsung_device_keypad,
 };
 
 static void __init smdk4x12_map_io(void)
 {
-	clk_xusbxti.rate = 24000000;
-
 	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
@@ -293,6 +355,15 @@ static void __init smdk4x12_machine_init(void)
 	s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
 	s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);
 
+	s3c_hsotg_set_platdata(&smdk4x12_hsotg_pdata);
+
+#ifdef CONFIG_DRM_EXYNOS
+	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
+	exynos4_fimd0_gpio_setup_24bpp();
+#else
+	s5p_fimd0_set_platdata(&smdk4x12_lcd_pdata);
+#endif
+
 	platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
 }