Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Driver specific changes

Again, a lot of platforms have changes in here: pxa, samsung, omap,
at91, imx, ...

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  ARM: sa1100: clean up of the clock support
  ARM: pxa: add dummy clock for sa1100-rtc
  RTC: sa1100: support sa1100, pxa and mmp soc families
  RTC: sa1100: remove redundant code of setting alarm
  RTC: sa1100: Clean out ost register
  Input: zylonite-wm97xx - replace IRQ_GPIO() with gpio_to_irq()
  pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq()
  ARM: EXYNOS: Modified files for SPI consolidation work
  ARM: S5P64X0: Enable SDHCI support
  ARM: S5P64X0: Add lookup of sdhci-s3c clocks using generic names
  ARM: S5P64X0: Add HSMMC setup for host Controller
  ARM: EXYNOS: Add USB OHCI support to ORIGEN board
  USB: Add Samsung Exynos OHCI diver
  ARM: EXYNOS: Add USB OHCI support to SMDKV310 board
  ARM: EXYNOS: Add USB OHCI device
  net: macb: fix build break with !CONFIG_OF
  i2c: tegra: Support DVC controller in device tree
  i2c: tegra: Add __devinit/exit to probe/remove
  net/at91_ether: use gpio_is_valid for phy IRQ line
  ARM: at91/net: add macb ethernet controller in 9g45/9g20 DT
  ...

12 files changed, 270 insertions, 30 deletions

diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index b4bdf297e9f..5d602f68a0e 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -89,6 +89,11 @@ config EXYNOS4_DEV_DWMCI
 	help
 	  Compile in platform device definitions for DWMCI
 
+config EXYNOS4_DEV_USB_OHCI
+	bool
+	help
+	  Compile in platform device definition for USB OHCI
+
 config EXYNOS4_SETUP_I2C1
 	bool
 	help
@@ -150,6 +155,11 @@ config EXYNOS4_SETUP_USB_PHY
 	help
 	  Common setup code for USB PHY controller
 
+config EXYNOS4_SETUP_SPI
+	bool
+	help
+	  Common setup code for SPI GPIO configurations.
+
 # machine support
 
 if ARCH_EXYNOS4
@@ -187,6 +197,7 @@ config MACH_SMDKV310
 	select EXYNOS4_DEV_DMA
 	select EXYNOS4_DEV_PD
 	select SAMSUNG_DEV_PWM
+	select EXYNOS4_DEV_USB_OHCI
 	select EXYNOS4_DEV_SYSMMU
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
@@ -300,6 +311,7 @@ config MACH_ORIGEN
 	select SAMSUNG_DEV_PWM
 	select EXYNOS4_DEV_DMA
 	select EXYNOS4_DEV_PD
+	select EXYNOS4_DEV_USB_OHCI
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_USB_PHY
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index ca85a99c159..5fc202cdfdb 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_EXYNOS4_DEV_PD)		+= dev-pd.o
 obj-$(CONFIG_EXYNOS4_DEV_SYSMMU)	+= dev-sysmmu.o
 obj-$(CONFIG_EXYNOS4_DEV_DWMCI)		+= dev-dwmci.o
 obj-$(CONFIG_EXYNOS4_DEV_DMA)		+= dma.o
+obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI)	+= dev-ohci.o
 
 obj-$(CONFIG_ARCH_EXYNOS4)		+= setup-i2c0.o
 obj-$(CONFIG_EXYNOS4_SETUP_FIMC)	+= setup-fimc.o
@@ -63,3 +64,4 @@ obj-$(CONFIG_EXYNOS4_SETUP_I2C7)	+= setup-i2c7.o
 obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD)	+= setup-keypad.o
 obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
 obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY)	+= setup-usb-phy.o
+obj-$(CONFIG_EXYNOS4_SETUP_SPI)		+= setup-spi.o
diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c
index 5d5250df33f..5a8c42e9000 100644
--- a/arch/arm/mach-exynos/clock.c
+++ b/arch/arm/mach-exynos/clock.c
@@ -1112,36 +1112,6 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_spi",
-			.devname	= "s3c64xx-spi.0",
-			.enable		= exynos4_clksrc_mask_peril1_ctrl,
-			.ctrlbit	= (1 << 16),
-		},
-		.sources = &clkset_group,
-		.reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 16, .size = 4 },
-		.reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 0, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "sclk_spi",
-			.devname	= "s3c64xx-spi.1",
-			.enable		= exynos4_clksrc_mask_peril1_ctrl,
-			.ctrlbit	= (1 << 20),
-		},
-		.sources = &clkset_group,
-		.reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 20, .size = 4 },
-		.reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 16, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "sclk_spi",
-			.devname	= "s3c64xx-spi.2",
-			.enable		= exynos4_clksrc_mask_peril1_ctrl,
-			.ctrlbit	= (1 << 24),
-		},
-		.sources = &clkset_group,
-		.reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 24, .size = 4 },
-		.reg_div = { .reg = S5P_CLKDIV_PERIL2, .shift = 0, .size = 4 },
-	}, {
-		.clk		= {
 			.name		= "sclk_fimg2d",
 		},
 		.sources = &clkset_mout_g2d,
@@ -1258,6 +1228,42 @@ static struct clksrc_clk clk_sclk_mmc3 = {
 	.reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 },
 };
 
+static struct clksrc_clk clk_sclk_spi0 = {
+	.clk		= {
+		.name		= "sclk_spi",
+		.devname		= "s3c64xx-spi.0",
+		.enable		= exynos4_clksrc_mask_peril1_ctrl,
+		.ctrlbit		= (1 << 16),
+	},
+	.sources = &clkset_group,
+	.reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 16, .size = 4 },
+	.reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi1 = {
+	.clk		= {
+		.name		= "sclk_spi",
+		.devname		= "s3c64xx-spi.1",
+		.enable		= exynos4_clksrc_mask_peril1_ctrl,
+		.ctrlbit		= (1 << 20),
+	},
+	.sources = &clkset_group,
+	.reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 20, .size = 4 },
+	.reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi2 = {
+	.clk		= {
+		.name		= "sclk_spi",
+		.devname		= "s3c64xx-spi.2",
+		.enable		= exynos4_clksrc_mask_peril1_ctrl,
+		.ctrlbit		= (1 << 24),
+	},
+	.sources = &clkset_group,
+	.reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 24, .size = 4 },
+	.reg_div = { .reg = S5P_CLKDIV_PERIL2, .shift = 0, .size = 4 },
+};
+
 /* Clock initialization code */
 static struct clksrc_clk *sysclks[] = {
 	&clk_mout_apll,
@@ -1306,6 +1312,10 @@ static struct clksrc_clk *clksrc_cdev[] = {
 	&clk_sclk_mmc1,
 	&clk_sclk_mmc2,
 	&clk_sclk_mmc3,
+	&clk_sclk_spi0,
+	&clk_sclk_spi1,
+	&clk_sclk_spi2,
+
 };
 
 static struct clk_lookup exynos4_clk_lookup[] = {
@@ -1319,6 +1329,9 @@ static struct clk_lookup exynos4_clk_lookup[] = {
 	CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &clk_sclk_mmc3.clk),
 	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0),
 	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &clk_sclk_spi0.clk),
+	CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk0", &clk_sclk_spi1.clk),
+	CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk0", &clk_sclk_spi2.clk),
 };
 
 static int xtal_rate;
diff --git a/arch/arm/mach-exynos/dev-ohci.c b/arch/arm/mach-exynos/dev-ohci.c
new file mode 100644
index 00000000000..b8e75300c77
--- /dev/null
+++ b/arch/arm/mach-exynos/dev-ohci.c
@@ -0,0 +1,52 @@
+/* linux/arch/arm/mach-exynos/dev-ohci.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * EXYNOS - OHCI support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <mach/ohci.h>
+
+#include <plat/devs.h>
+#include <plat/usb-phy.h>
+
+static struct resource exynos4_ohci_resource[] = {
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_OHCI, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_USB_HOST),
+};
+
+static u64 exynos4_ohci_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device exynos4_device_ohci = {
+	.name		= "exynos-ohci",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(exynos4_ohci_resource),
+	.resource	= exynos4_ohci_resource,
+	.dev		= {
+		.dma_mask		= &exynos4_ohci_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
+
+void __init exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd)
+{
+	struct exynos4_ohci_platdata *npd;
+
+	npd = s3c_set_platdata(pd, sizeof(struct exynos4_ohci_platdata),
+			&exynos4_device_ohci);
+
+	if (!npd->phy_init)
+		npd->phy_init = s5p_usb_phy_init;
+	if (!npd->phy_exit)
+		npd->phy_exit = s5p_usb_phy_exit;
+}
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index 713dd5251c6..f77bce04789 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -72,6 +72,9 @@
 #define IRQ_IIC5		IRQ_SPI(63)
 #define IRQ_IIC6		IRQ_SPI(64)
 #define IRQ_IIC7		IRQ_SPI(65)
+#define IRQ_SPI0		IRQ_SPI(66)
+#define IRQ_SPI1		IRQ_SPI(67)
+#define IRQ_SPI2		IRQ_SPI(68)
 
 #define IRQ_USB_HOST		IRQ_SPI(70)
 #define IRQ_USB_HSOTG		IRQ_SPI(71)
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index d1829860a0e..c754a22a2bb 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -87,6 +87,10 @@
 #define EXYNOS4_PA_SYSMMU_TV		0x12E20000
 #define EXYNOS4_PA_SYSMMU_MFC_L		0x13620000
 #define EXYNOS4_PA_SYSMMU_MFC_R		0x13630000
+#define EXYNOS4_PA_SPI0			0x13920000
+#define EXYNOS4_PA_SPI1			0x13930000
+#define EXYNOS4_PA_SPI2			0x13940000
+
 
 #define EXYNOS4_PA_GPIO1		0x11400000
 #define EXYNOS4_PA_GPIO2		0x11000000
@@ -107,6 +111,7 @@
 #define EXYNOS4_PA_SROMC		0x12570000
 
 #define EXYNOS4_PA_EHCI			0x12580000
+#define EXYNOS4_PA_OHCI			0x12590000
 #define EXYNOS4_PA_HSPHY		0x125B0000
 #define EXYNOS4_PA_MFC			0x13400000
 
@@ -148,6 +153,9 @@
 #define S3C_PA_RTC			EXYNOS4_PA_RTC
 #define S3C_PA_WDT			EXYNOS4_PA_WATCHDOG
 #define S3C_PA_UART			EXYNOS4_PA_UART
+#define S3C_PA_SPI0			EXYNOS4_PA_SPI0
+#define S3C_PA_SPI1			EXYNOS4_PA_SPI1
+#define S3C_PA_SPI2			EXYNOS4_PA_SPI2
 
 #define S5P_PA_EHCI			EXYNOS4_PA_EHCI
 #define S5P_PA_FIMC0			EXYNOS4_PA_FIMC0
diff --git a/arch/arm/mach-exynos/include/mach/ohci.h b/arch/arm/mach-exynos/include/mach/ohci.h
new file mode 100644
index 00000000000..c256c595be5
--- /dev/null
+++ b/arch/arm/mach-exynos/include/mach/ohci.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MACH_EXYNOS_OHCI_H
+#define __MACH_EXYNOS_OHCI_H
+
+struct exynos4_ohci_platdata {
+	int (*phy_init)(struct platform_device *pdev, int type);
+	int (*phy_exit)(struct platform_device *pdev, int type);
+};
+
+extern void exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd);
+
+#endif /* __MACH_EXYNOS_OHCI_H */
diff --git a/arch/arm/mach-exynos/include/mach/spi-clocks.h b/arch/arm/mach-exynos/include/mach/spi-clocks.h
new file mode 100644
index 00000000000..576efdf6d09
--- /dev/null
+++ b/arch/arm/mach-exynos/include/mach/spi-clocks.h
@@ -0,0 +1,16 @@
+/* linux/arch/arm/mach-exynos4/include/mach/spi-clocks.h
+ *
+ * Copyright (C) 2011 Samsung Electronics Co. Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_SPI_CLKS_H
+#define __ASM_ARCH_SPI_CLKS_H __FILE__
+
+/* Must source from SCLK_SPI */
+#define EXYNOS4_SPI_SRCCLK_SCLK		0
+
+#endif /* __ASM_ARCH_SPI_CLKS_H */
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 586eb995aa9..2b11e046d39 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -41,6 +41,7 @@
 #include <plat/fb.h>
 #include <plat/mfc.h>
 
+#include <mach/ohci.h>
 #include <mach/map.h>
 
 #include "common.h"
@@ -485,6 +486,16 @@ static void __init origen_ehci_init(void)
 	s5p_ehci_set_platdata(pdata);
 }
 
+/* USB OHCI */
+static struct exynos4_ohci_platdata origen_ohci_pdata;
+
+static void __init origen_ohci_init(void)
+{
+	struct exynos4_ohci_platdata *pdata = &origen_ohci_pdata;
+
+	exynos4_ohci_set_platdata(pdata);
+}
+
 static struct gpio_keys_button origen_gpio_keys_table[] = {
 	{
 		.code			= KEY_MENU,
@@ -608,6 +619,7 @@ static struct platform_device *origen_devices[] __initdata = {
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
 	&s5p_device_mixer,
+	&exynos4_device_ohci,
 	&exynos4_device_pd[PD_LCD0],
 	&exynos4_device_pd[PD_TV],
 	&exynos4_device_pd[PD_G3D],
@@ -672,6 +684,7 @@ static void __init origen_machine_init(void)
 	s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);
 
 	origen_ehci_init();
+	origen_ohci_init();
 	clk_xusbxti.rate = 24000000;
 
 	s5p_tv_setup();
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index a27b23eee9f..b2c5557f50e 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -42,6 +42,7 @@
 #include <plat/clock.h>
 
 #include <mach/map.h>
+#include <mach/ohci.h>
 
 #include "common.h"
 
@@ -245,6 +246,16 @@ static void __init smdkv310_ehci_init(void)
 	s5p_ehci_set_platdata(pdata);
 }
 
+/* USB OHCI */
+static struct exynos4_ohci_platdata smdkv310_ohci_pdata;
+
+static void __init smdkv310_ohci_init(void)
+{
+	struct exynos4_ohci_platdata *pdata = &smdkv310_ohci_pdata;
+
+	exynos4_ohci_set_platdata(pdata);
+}
+
 static struct platform_device *smdkv310_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
@@ -261,6 +272,7 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&s5p_device_fimc3,
 	&exynos4_device_ac97,
 	&exynos4_device_i2s0,
+	&exynos4_device_ohci,
 	&samsung_device_keypad,
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
@@ -363,6 +375,7 @@ static void __init smdkv310_machine_init(void)
 	s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
 
 	smdkv310_ehci_init();
+	smdkv310_ohci_init();
 	clk_xusbxti.rate = 24000000;
 
 	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
diff --git a/arch/arm/mach-exynos/setup-spi.c b/arch/arm/mach-exynos/setup-spi.c
new file mode 100644
index 00000000000..833ff40ee0e
--- /dev/null
+++ b/arch/arm/mach-exynos/setup-spi.c
@@ -0,0 +1,72 @@
+/* linux/arch/arm/mach-exynos4/setup-spi.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ *             http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+	.fifo_lvl_mask	= 0x1ff,
+	.rx_lvl_offset	= 15,
+	.high_speed	= 1,
+	.clk_from_cmu	= true,
+	.tx_st_done	= 25,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(EXYNOS4_GPB(0), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(EXYNOS4_GPB(0), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgall_range(EXYNOS4_GPB(2), 2,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 15,
+	.high_speed	= 1,
+	.clk_from_cmu	= true,
+	.tx_st_done	= 25,
+};
+
+int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(EXYNOS4_GPB(4), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(EXYNOS4_GPB(4), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgall_range(EXYNOS4_GPB(6), 2,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C64XX_DEV_SPI2
+struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = {
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 15,
+	.high_speed	= 1,
+	.clk_from_cmu	= true,
+	.tx_st_done	= 25,
+};
+
+int s3c64xx_spi2_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(EXYNOS4_GPC1(1), S3C_GPIO_SFN(5));
+	s3c_gpio_setpull(EXYNOS4_GPC1(1), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgall_range(EXYNOS4_GPC1(3), 2,
+			      S3C_GPIO_SFN(5), S3C_GPIO_PULL_UP);
+	return 0;
+}
+#endif
diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c
index 39aca045f66..41743d21e8c 100644
--- a/arch/arm/mach-exynos/setup-usb-phy.c
+++ b/arch/arm/mach-exynos/setup-usb-phy.c
@@ -19,6 +19,13 @@
 #include <plat/cpu.h>
 #include <plat/usb-phy.h>
 
+static atomic_t host_usage;
+
+static int exynos4_usb_host_phy_is_on(void)
+{
+	return (readl(EXYNOS4_PHYPWR) & PHY1_STD_ANALOG_POWERDOWN) ? 0 : 1;
+}
+
 static int exynos4_usb_phy1_init(struct platform_device *pdev)
 {
 	struct clk *otg_clk;
@@ -27,6 +34,8 @@ static int exynos4_usb_phy1_init(struct platform_device *pdev)
 	u32 rstcon;
 	int err;
 
+	atomic_inc(&host_usage);
+
 	otg_clk = clk_get(&pdev->dev, "otg");
 	if (IS_ERR(otg_clk)) {
 		dev_err(&pdev->dev, "Failed to get otg clock\n");
@@ -39,6 +48,9 @@ static int exynos4_usb_phy1_init(struct platform_device *pdev)
 		return err;
 	}
 
+	if (exynos4_usb_host_phy_is_on())
+		return 0;
+
 	writel(readl(S5P_USBHOST_PHY_CONTROL) | S5P_USBHOST_PHY_ENABLE,
 			S5P_USBHOST_PHY_CONTROL);
 
@@ -95,6 +107,9 @@ static int exynos4_usb_phy1_exit(struct platform_device *pdev)
 	struct clk *otg_clk;
 	int err;
 
+	if (atomic_dec_return(&host_usage) > 0)
+		return 0;
+
 	otg_clk = clk_get(&pdev->dev, "otg");
 	if (IS_ERR(otg_clk)) {
 		dev_err(&pdev->dev, "Failed to get otg clock\n");