Merge commit 'v3.3-rc1' into stable/for-linus-fixes-3.3

* commit 'v3.3-rc1': (9775 commits)
  Linux 3.3-rc1
  x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits
  qnx4: don't leak ->BitMap on late failure exits
  qnx4: reduce the insane nesting in qnx4_checkroot()
  qnx4: di_fname is an array, for crying out loud...
  KEYS: Permit key_serial() to be called with a const key pointer
  keys: fix user_defined key sparse messages
  ima: fix cred sparse warning
  uml: fix compile for x86-64
  MPILIB: Add a missing ENOMEM check
  tpm: fix (ACPI S3) suspend regression
  nvme: fix merge error due to change of 'make_request_fn' fn type
  xen: using EXPORT_SYMBOL requires including export.h
  gpio: tps65910: Use correct offset for gpio initialization
  acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec
  intel_idle: Split up and provide per CPU initialization func
  ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2
  tg3: Fix single-vector MSI-X code
  openvswitch: Fix multipart datapath dumps.
  ipv6: fix per device IP snmp counters
  ...

36 files changed, 1460 insertions, 1209 deletions

diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 724ec0f3560..5d602f68a0e 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -17,6 +17,8 @@ choice
 
 config ARCH_EXYNOS4
 	bool "SAMSUNG EXYNOS4"
+	select HAVE_SMP
+	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Samsung EXYNOS4 SoCs based systems
 
@@ -57,6 +59,11 @@ config EXYNOS4_MCT
 	help
 	  Use MCT (Multi Core Timer) as kernel timers
 
+config EXYNOS4_DEV_DMA
+	bool
+	help
+	  Compile in amba device definitions for DMA controller
+
 config EXYNOS4_DEV_AHCI
 	bool
 	help
@@ -82,6 +89,11 @@ config EXYNOS4_DEV_DWMCI
 	help
 	  Compile in platform device definitions for DWMCI
 
+config EXYNOS4_DEV_USB_OHCI
+	bool
+	help
+	  Compile in platform device definition for USB OHCI
+
 config EXYNOS4_SETUP_I2C1
 	bool
 	help
@@ -143,6 +155,11 @@ config EXYNOS4_SETUP_USB_PHY
 	help
 	  Common setup code for USB PHY controller
 
+config EXYNOS4_SETUP_SPI
+	bool
+	help
+	  Common setup code for SPI GPIO configurations.
+
 # machine support
 
 if ARCH_EXYNOS4
@@ -177,8 +194,10 @@ config MACH_SMDKV310
 	select SAMSUNG_DEV_BACKLIGHT
 	select EXYNOS4_DEV_AHCI
 	select SAMSUNG_DEV_KEYPAD
+	select EXYNOS4_DEV_DMA
 	select EXYNOS4_DEV_PD
 	select SAMSUNG_DEV_PWM
+	select EXYNOS4_DEV_USB_OHCI
 	select EXYNOS4_DEV_SYSMMU
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
@@ -197,6 +216,7 @@ config MACH_ARMLEX4210
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
 	select EXYNOS4_DEV_AHCI
+	select EXYNOS4_DEV_DMA
 	select EXYNOS4_DEV_SYSMMU
 	select EXYNOS4_SETUP_SDHCI
 	help
@@ -222,6 +242,7 @@ config MACH_UNIVERSAL_C210
 	select S5P_DEV_MFC
 	select S5P_DEV_ONENAND
 	select S5P_DEV_TV
+	select EXYNOS4_DEV_DMA
 	select EXYNOS4_DEV_PD
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
@@ -255,6 +276,7 @@ config MACH_NURI
 	select S5P_DEV_MFC
 	select S5P_DEV_USB_EHCI
 	select S5P_SETUP_MIPIPHY
+	select EXYNOS4_DEV_DMA
 	select EXYNOS4_DEV_PD
 	select EXYNOS4_SETUP_FIMC
 	select EXYNOS4_SETUP_FIMD0
@@ -287,7 +309,9 @@ config MACH_ORIGEN
 	select S5P_DEV_USB_EHCI
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_PWM
+	select EXYNOS4_DEV_DMA
 	select EXYNOS4_DEV_PD
+	select EXYNOS4_DEV_USB_OHCI
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_USB_PHY
@@ -327,6 +351,20 @@ config MACH_SMDK4412
 	  Machine support for Samsung SMDK4412
 endif
 
+comment "Flattened Device Tree based board for Exynos4 based SoC"
+
+config MACH_EXYNOS4_DT
+	bool "Samsung Exynos4 Machine using device tree"
+	select CPU_EXYNOS4210
+	select USE_OF
+	select ARM_AMBA
+	select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
+	help
+	  Machine support for Samsung Exynos4 machine with device tree enabled.
+	  Select this if a fdt blob is available for the Exynos4 SoC based board.
+	  Note: This is under development and not all peripherals can be supported
+	  with this machine file.
+
 if ARCH_EXYNOS4
 
 comment "Configuration for HSMMC 8-bit bus width"
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 59069a35e40..5fc202cdfdb 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -10,15 +10,17 @@ obj-m				:=
 obj-n				:=
 obj-				:=
 
-# Core support for EXYNOS4 system
+# Core
 
-obj-$(CONFIG_ARCH_EXYNOS4)	+= cpu.o init.o clock.o irq-combiner.o setup-i2c0.o
-obj-$(CONFIG_ARCH_EXYNOS4)	+= irq-eint.o dma.o pmu.o
+obj-$(CONFIG_ARCH_EXYNOS4)	+= common.o clock.o
 obj-$(CONFIG_CPU_EXYNOS4210)	+= clock-exynos4210.o
 obj-$(CONFIG_SOC_EXYNOS4212)	+= clock-exynos4212.o
+
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
+obj-$(CONFIG_ARCH_EXYNOS4)	+= pmu.o
+
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 
 obj-$(CONFIG_EXYNOS4_MCT)	+= mct.o
@@ -37,6 +39,8 @@ obj-$(CONFIG_MACH_ORIGEN)		+= mach-origen.o
 obj-$(CONFIG_MACH_SMDK4212)		+= mach-smdk4x12.o
 obj-$(CONFIG_MACH_SMDK4412)		+= mach-smdk4x12.o
 
+obj-$(CONFIG_MACH_EXYNOS4_DT)		+= mach-exynos4-dt.o
+
 # device support
 
 obj-$(CONFIG_ARCH_EXYNOS4)		+= dev-audio.o
@@ -44,7 +48,10 @@ obj-$(CONFIG_EXYNOS4_DEV_AHCI)		+= dev-ahci.o
 obj-$(CONFIG_EXYNOS4_DEV_PD)		+= dev-pd.o
 obj-$(CONFIG_EXYNOS4_DEV_SYSMMU)	+= dev-sysmmu.o
 obj-$(CONFIG_EXYNOS4_DEV_DWMCI)		+= dev-dwmci.o
+obj-$(CONFIG_EXYNOS4_DEV_DMA)		+= dma.o
+obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI)	+= dev-ohci.o
 
+obj-$(CONFIG_ARCH_EXYNOS4)		+= setup-i2c0.o
 obj-$(CONFIG_EXYNOS4_SETUP_FIMC)	+= setup-fimc.o
 obj-$(CONFIG_EXYNOS4_SETUP_FIMD0)	+= setup-fimd0.o
 obj-$(CONFIG_EXYNOS4_SETUP_I2C1)	+= setup-i2c1.o
@@ -55,6 +62,6 @@ obj-$(CONFIG_EXYNOS4_SETUP_I2C5)	+= setup-i2c5.o
 obj-$(CONFIG_EXYNOS4_SETUP_I2C6)	+= setup-i2c6.o
 obj-$(CONFIG_EXYNOS4_SETUP_I2C7)	+= setup-i2c7.o
 obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD)	+= setup-keypad.o
-obj-$(CONFIG_EXYNOS4_SETUP_SDHCI)	+= setup-sdhci.o
 obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
 obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY)	+= setup-usb-phy.o
+obj-$(CONFIG_EXYNOS4_SETUP_SPI)		+= setup-spi.o
diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c
index b9d5ef670eb..a5823a7f249 100644
--- a/arch/arm/mach-exynos/clock-exynos4210.c
+++ b/arch/arm/mach-exynos/clock-exynos4210.c
@@ -23,7 +23,6 @@
 #include <plat/pll.h>
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
-#include <plat/exynos4.h>
 #include <plat/pm.h>
 
 #include <mach/hardware.h>
@@ -31,6 +30,8 @@
 #include <mach/regs-clock.h>
 #include <mach/exynos4-clock.h>
 
+#include "common.h"
+
 static struct sleep_save exynos4210_clock_save[] = {
 	SAVE_ITEM(S5P_CLKSRC_IMAGE),
 	SAVE_ITEM(S5P_CLKSRC_LCD1),
diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c
index 77d5decb34f..26a668b0d10 100644
--- a/arch/arm/mach-exynos/clock-exynos4212.c
+++ b/arch/arm/mach-exynos/clock-exynos4212.c
@@ -23,7 +23,6 @@
 #include <plat/pll.h>
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
-#include <plat/exynos4.h>
 #include <plat/pm.h>
 
 #include <mach/hardware.h>
@@ -31,6 +30,8 @@
 #include <mach/regs-clock.h>
 #include <mach/exynos4-clock.h>
 
+#include "common.h"
+
 static struct sleep_save exynos4212_clock_save[] = {
 	SAVE_ITEM(S5P_CLKSRC_IMAGE),
 	SAVE_ITEM(S5P_CLKDIV_IMAGE),
diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c
index 2894f0adef5..5a8c42e9000 100644
--- a/arch/arm/mach-exynos/clock.c
+++ b/arch/arm/mach-exynos/clock.c
@@ -21,7 +21,6 @@
 #include <plat/pll.h>
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
-#include <plat/exynos4.h>
 #include <plat/pm.h>
 
 #include <mach/map.h>
@@ -29,6 +28,8 @@
 #include <mach/sysmmu.h>
 #include <mach/exynos4-clock.h>
 
+#include "common.h"
+
 static struct sleep_save exynos4_clock_save[] = {
 	SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
 	SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
@@ -553,16 +554,6 @@ static struct clk init_clocks_off[] = {
 		.enable		= exynos4_clk_dac_ctrl,
 		.ctrlbit	= (1 << 0),
 	}, {
-		.name		= "dma",
-		.devname	= "dma-pl330.0",
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "dma",
-		.devname	= "dma-pl330.1",
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 1),
-	}, {
 		.name		= "adc",
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 15),
@@ -778,6 +769,20 @@ static struct clk init_clocks[] = {
 	}
 };
 
+static struct clk clk_pdma0 = {
+	.name		= "dma",
+	.devname	= "dma-pl330.0",
+	.enable		= exynos4_clk_ip_fsys_ctrl,
+	.ctrlbit	= (1 << 0),
+};
+
+static struct clk clk_pdma1 = {
+	.name		= "dma",
+	.devname	= "dma-pl330.1",
+	.enable		= exynos4_clk_ip_fsys_ctrl,
+	.ctrlbit	= (1 << 1),
+};
+
 struct clk *clkset_group_list[] = {
 	[0] = &clk_ext_xtal_mux,
 	[1] = &clk_xusbxti,
@@ -1009,46 +1014,6 @@ static struct clksrc_clk clk_dout_mmc4 = {
 
 static struct clksrc_clk clksrcs[] = {
 	{
-		.clk	= {
-			.name		= "uclk1",
-			.devname	= "s5pv210-uart.0",
-			.enable		= exynos4_clksrc_mask_peril0_ctrl,
-			.ctrlbit	= (1 << 0),
-		},
-		.sources = &clkset_group,
-		.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 },
-		.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "uclk1",
-			.devname	= "s5pv210-uart.1",
-			.enable		= exynos4_clksrc_mask_peril0_ctrl,
-			.ctrlbit	= (1 << 4),
-		},
-		.sources = &clkset_group,
-		.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 },
-		.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "uclk1",
-			.devname	= "s5pv210-uart.2",
-			.enable		= exynos4_clksrc_mask_peril0_ctrl,
-			.ctrlbit	= (1 << 8),
-		},
-		.sources = &clkset_group,
-		.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 },
-		.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "uclk1",
-			.devname	= "s5pv210-uart.3",
-			.enable		= exynos4_clksrc_mask_peril0_ctrl,
-			.ctrlbit	= (1 << 12),
-		},
-		.sources = &clkset_group,
-		.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 },
-		.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 },
-	}, {
 		.clk		= {
 			.name		= "sclk_pwm",
 			.enable		= exynos4_clksrc_mask_peril0_ctrl,
@@ -1147,36 +1112,6 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_spi",
-			.devname	= "s3c64xx-spi.0",
-			.enable		= exynos4_clksrc_mask_peril1_ctrl,
-			.ctrlbit	= (1 << 16),
-		},
-		.sources = &clkset_group,
-		.reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 16, .size = 4 },
-		.reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 0, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "sclk_spi",
-			.devname	= "s3c64xx-spi.1",
-			.enable		= exynos4_clksrc_mask_peril1_ctrl,
-			.ctrlbit	= (1 << 20),
-		},
-		.sources = &clkset_group,
-		.reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 20, .size = 4 },
-		.reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 16, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "sclk_spi",
-			.devname	= "s3c64xx-spi.2",
-			.enable		= exynos4_clksrc_mask_peril1_ctrl,
-			.ctrlbit	= (1 << 24),
-		},
-		.sources = &clkset_group,
-		.reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 24, .size = 4 },
-		.reg_div = { .reg = S5P_CLKDIV_PERIL2, .shift = 0, .size = 4 },
-	}, {
-		.clk		= {
 			.name		= "sclk_fimg2d",
 		},
 		.sources = &clkset_mout_g2d,
@@ -1192,42 +1127,6 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLKDIV_MFC, .shift = 0, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_mmc",
-			.devname	= "s3c-sdhci.0",
-			.parent		= &clk_dout_mmc0.clk,
-			.enable		= exynos4_clksrc_mask_fsys_ctrl,
-			.ctrlbit	= (1 << 0),
-		},
-		.reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 8, .size = 8 },
-	}, {
-		.clk		= {
-			.name		= "sclk_mmc",
-			.devname	= "s3c-sdhci.1",
-			.parent         = &clk_dout_mmc1.clk,
-			.enable		= exynos4_clksrc_mask_fsys_ctrl,
-			.ctrlbit	= (1 << 4),
-		},
-		.reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 24, .size = 8 },
-	}, {
-		.clk		= {
-			.name		= "sclk_mmc",
-			.devname	= "s3c-sdhci.2",
-			.parent         = &clk_dout_mmc2.clk,
-			.enable		= exynos4_clksrc_mask_fsys_ctrl,
-			.ctrlbit	= (1 << 8),
-		},
-		.reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 8, .size = 8 },
-	}, {
-		.clk		= {
-			.name		= "sclk_mmc",
-			.devname	= "s3c-sdhci.3",
-			.parent         = &clk_dout_mmc3.clk,
-			.enable		= exynos4_clksrc_mask_fsys_ctrl,
-			.ctrlbit	= (1 << 12),
-		},
-		.reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 },
-	}, {
-		.clk		= {
 			.name		= "sclk_dwmmc",
 			.parent         = &clk_dout_mmc4.clk,
 			.enable		= exynos4_clksrc_mask_fsys_ctrl,
@@ -1237,6 +1136,134 @@ static struct clksrc_clk clksrcs[] = {
 	}
 };
 
+static struct clksrc_clk clk_sclk_uart0 = {
+	.clk	= {
+		.name		= "uclk1",
+		.devname	= "exynos4210-uart.0",
+		.enable		= exynos4_clksrc_mask_peril0_ctrl,
+		.ctrlbit	= (1 << 0),
+	},
+	.sources = &clkset_group,
+	.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 },
+	.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uart1 = {
+	.clk		= {
+		.name		= "uclk1",
+		.devname	= "exynos4210-uart.1",
+		.enable		= exynos4_clksrc_mask_peril0_ctrl,
+		.ctrlbit	= (1 << 4),
+	},
+	.sources = &clkset_group,
+	.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 },
+	.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uart2 = {
+	.clk		= {
+		.name		= "uclk1",
+		.devname	= "exynos4210-uart.2",
+		.enable		= exynos4_clksrc_mask_peril0_ctrl,
+		.ctrlbit	= (1 << 8),
+	},
+	.sources = &clkset_group,
+	.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 },
+	.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uart3 = {
+	.clk		= {
+		.name		= "uclk1",
+		.devname	= "exynos4210-uart.3",
+		.enable		= exynos4_clksrc_mask_peril0_ctrl,
+		.ctrlbit	= (1 << 12),
+	},
+	.sources = &clkset_group,
+	.reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 },
+	.reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc0 = {
+	.clk		= {
+		.name		= "sclk_mmc",
+		.devname	= "s3c-sdhci.0",
+		.parent		= &clk_dout_mmc0.clk,
+		.enable		= exynos4_clksrc_mask_fsys_ctrl,
+		.ctrlbit	= (1 << 0),
+	},
+	.reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 8, .size = 8 },
+};
+
+static struct clksrc_clk clk_sclk_mmc1 = {
+	.clk		= {
+		.name		= "sclk_mmc",
+		.devname	= "s3c-sdhci.1",
+		.parent         = &clk_dout_mmc1.clk,
+		.enable		= exynos4_clksrc_mask_fsys_ctrl,
+		.ctrlbit	= (1 << 4),
+	},
+	.reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 24, .size = 8 },
+};
+
+static struct clksrc_clk clk_sclk_mmc2 = {
+	.clk		= {
+		.name		= "sclk_mmc",
+		.devname	= "s3c-sdhci.2",
+		.parent         = &clk_dout_mmc2.clk,
+		.enable		= exynos4_clksrc_mask_fsys_ctrl,
+		.ctrlbit	= (1 << 8),
+	},
+	.reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 8, .size = 8 },
+};
+
+static struct clksrc_clk clk_sclk_mmc3 = {
+	.clk		= {
+		.name		= "sclk_mmc",
+		.devname	= "s3c-sdhci.3",
+		.parent         = &clk_dout_mmc3.clk,
+		.enable		= exynos4_clksrc_mask_fsys_ctrl,
+		.ctrlbit	= (1 << 12),
+	},
+	.reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 },
+};
+
+static struct clksrc_clk clk_sclk_spi0 = {
+	.clk		= {
+		.name		= "sclk_spi",
+		.devname		= "s3c64xx-spi.0",
+		.enable		= exynos4_clksrc_mask_peril1_ctrl,
+		.ctrlbit		= (1 << 16),
+	},
+	.sources = &clkset_group,
+	.reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 16, .size = 4 },
+	.reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi1 = {
+	.clk		= {
+		.name		= "sclk_spi",
+		.devname		= "s3c64xx-spi.1",
+		.enable		= exynos4_clksrc_mask_peril1_ctrl,
+		.ctrlbit		= (1 << 20),
+	},
+	.sources = &clkset_group,
+	.reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 20, .size = 4 },
+	.reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi2 = {
+	.clk		= {
+		.name		= "sclk_spi",
+		.devname		= "s3c64xx-spi.2",
+		.enable		= exynos4_clksrc_mask_peril1_ctrl,
+		.ctrlbit		= (1 << 24),
+	},
+	.sources = &clkset_group,
+	.reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 24, .size = 4 },
+	.reg_div = { .reg = S5P_CLKDIV_PERIL2, .shift = 0, .size = 4 },
+};
+
 /* Clock initialization code */
 static struct clksrc_clk *sysclks[] = {
 	&clk_mout_apll,
@@ -1271,6 +1298,42 @@ static struct clksrc_clk *sysclks[] = {
 	&clk_mout_mfc1,
 };
 
+static struct clk *clk_cdev[] = {
+	&clk_pdma0,
+	&clk_pdma1,
+};
+
+static struct clksrc_clk *clksrc_cdev[] = {
+	&clk_sclk_uart0,
+	&clk_sclk_uart1,
+	&clk_sclk_uart2,
+	&clk_sclk_uart3,
+	&clk_sclk_mmc0,
+	&clk_sclk_mmc1,
+	&clk_sclk_mmc2,
+	&clk_sclk_mmc3,
+	&clk_sclk_spi0,
+	&clk_sclk_spi1,
+	&clk_sclk_spi2,
+
+};
+
+static struct clk_lookup exynos4_clk_lookup[] = {
+	CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &clk_sclk_uart0.clk),
+	CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &clk_sclk_uart1.clk),
+	CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &clk_sclk_uart2.clk),
+	CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &clk_sclk_uart3.clk),
+	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
+	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
+	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
+	CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &clk_sclk_mmc3.clk),
+	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0),
+	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1),
+	CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &clk_sclk_spi0.clk),
+	CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk0", &clk_sclk_spi1.clk),
+	CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk0", &clk_sclk_spi2.clk),
+};
+
 static int xtal_rate;
 
 static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
@@ -1478,11 +1541,19 @@ void __init exynos4_register_clocks(void)
 	for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++)
 		s3c_register_clksrc(sclk_tv[ptr], 1);
 
+	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
+		s3c_register_clksrc(clksrc_cdev[ptr], 1);
+
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
+	s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
+	for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
+		s3c_disable_clocks(clk_cdev[ptr], 1);
+
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	clkdev_add_table(exynos4_clk_lookup, ARRAY_SIZE(exynos4_clk_lookup));
 
 	register_syscore_ops(&exynos4_clock_syscore_ops);
 	s3c24xx_register_clock(&dummy_apb_pclk);
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
new file mode 100644
index 00000000000..c59e1887100
--- /dev/null
+++ b/arch/arm/mach-exynos/common.c
@@ -0,0 +1,699 @@
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Common Codes for EXYNOS
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/sched.h>
+#include <linux/serial_core.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+
+#include <asm/proc-fns.h>
+#include <asm/exception.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-pmu.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
+#include <plat/sdhci.h>
+#include <plat/gpio-cfg.h>
+#include <plat/adc-core.h>
+#include <plat/fb-core.h>
+#include <plat/fimc-core.h>
+#include <plat/iic-core.h>
+#include <plat/tv-core.h>
+#include <plat/regs-serial.h>
+
+#include "common.h"
+
+static const char name_exynos4210[] = "EXYNOS4210";
+static const char name_exynos4212[] = "EXYNOS4212";
+static const char name_exynos4412[] = "EXYNOS4412";
+
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= EXYNOS4210_CPU_ID,
+		.idmask		= EXYNOS4_CPU_MASK,
+		.map_io		= exynos4_map_io,
+		.init_clocks	= exynos4_init_clocks,
+		.init_uarts	= exynos4_init_uarts,
+		.init		= exynos_init,
+		.name		= name_exynos4210,
+	}, {
+		.idcode		= EXYNOS4212_CPU_ID,
+		.idmask		= EXYNOS4_CPU_MASK,
+		.map_io		= exynos4_map_io,
+		.init_clocks	= exynos4_init_clocks,
+		.init_uarts	= exynos4_init_uarts,
+		.init		= exynos_init,
+		.name		= name_exynos4212,
+	}, {
+		.idcode		= EXYNOS4412_CPU_ID,
+		.idmask		= EXYNOS4_CPU_MASK,
+		.map_io		= exynos4_map_io,
+		.init_clocks	= exynos4_init_clocks,
+		.init_uarts	= exynos4_init_uarts,
+		.init		= exynos_init,
+		.name		= name_exynos4412,
+	},
+};
+
+/* Initial IO mappings */
+
+static struct map_desc exynos_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_CHIPID,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_CHIPID),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_SYS,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSCON),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_TIMER,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_TIMER),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_WATCHDOG),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_SROMC,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SROMC),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSTIMER),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_PMU,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_PMU),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_COMBINER_BASE,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_COMBINER),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GIC_CPU,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_GIC_CPU),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GIC_DIST,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_GIC_DIST),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_UART,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_UART),
+		.length		= SZ_512K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc exynos4_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_CMU,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_CMU),
+		.length		= SZ_128K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_COREPERI_BASE,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_COREPERI),
+		.length		= SZ_8K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_L2CC,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_L2CC),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO1,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_GPIO1),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO2,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_GPIO2),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_GPIO3,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_GPIO3),
+		.length		= SZ_256,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_DMC0,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_DMC0),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_HSPHY),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc exynos4_iodesc0[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSRAM,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc exynos4_iodesc1[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSRAM,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void exynos_idle(void)
+{
+	if (!need_resched())
+		cpu_do_idle();
+
+	local_irq_enable();
+}
+
+void exynos4_restart(char mode, const char *cmd)
+{
+	__raw_writel(0x1, S5P_SWRESET);
+}
+
+/*
+ * exynos_map_io
+ *
+ * register the standard cpu IO areas
+ */
+
+void __init exynos_init_io(struct map_desc *mach_desc, int size)
+{
+	/* initialize the io descriptors we need for initialization */
+	iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc));
+	if (mach_desc)
+		iotable_init(mach_desc, size);
+
+	/* detect cpu id and rev. */
+	s5p_init_cpu(S5P_VA_CHIPID);
+
+	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+void __init exynos4_map_io(void)
+{
+	iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
+
+	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
+		iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
+	else
+		iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
+
+	/* initialize device information early */
+	exynos4_default_sdhci0();
+	exynos4_default_sdhci1();
+	exynos4_default_sdhci2();
+	exynos4_default_sdhci3();
+
+	s3c_adc_setname("samsung-adc-v3");
+
+	s3c_fimc_setname(0, "exynos4-fimc");
+	s3c_fimc_setname(1, "exynos4-fimc");
+	s3c_fimc_setname(2, "exynos4-fimc");
+	s3c_fimc_setname(3, "exynos4-fimc");
+
+	/* The I2C bus controllers are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
+	s3c_i2c2_setname("s3c2440-i2c");
+
+	s5p_fb_setname(0, "exynos4-fb");
+	s5p_hdmi_setname("exynos4-hdmi");
+}
+
+void __init exynos4_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+	s3c24xx_register_baseclocks(xtal);
+	s5p_register_clocks(xtal);
+
+	if (soc_is_exynos4210())
+		exynos4210_register_clocks();
+	else if (soc_is_exynos4212() || soc_is_exynos4412())
+		exynos4212_register_clocks();
+
+	exynos4_register_clocks();
+	exynos4_setup_clocks();
+}
+
+#define COMBINER_ENABLE_SET	0x0
+#define COMBINER_ENABLE_CLEAR	0x4
+#define COMBINER_INT_STATUS	0xC
+
+static DEFINE_SPINLOCK(irq_controller_lock);
+
+struct combiner_chip_data {
+	unsigned int irq_offset;
+	unsigned int irq_mask;
+	void __iomem *base;
+};
+
+static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
+
+static inline void __iomem *combiner_base(struct irq_data *data)
+{
+	struct combiner_chip_data *combiner_data =
+		irq_data_get_irq_chip_data(data);
+
+	return combiner_data->base;
+}
+
+static void combiner_mask_irq(struct irq_data *data)
+{
+	u32 mask = 1 << (data->irq % 32);
+
+	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
+}
+
+static void combiner_unmask_irq(struct irq_data *data)
+{
+	u32 mask = 1 << (data->irq % 32);
+
+	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
+}
+
+static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
+{
+	struct combiner_chip_data *chip_data = irq_get_handler_data(irq);
+	struct irq_chip *chip = irq_get_chip(irq);
+	unsigned int cascade_irq, combiner_irq;
+	unsigned long status;
+
+	chained_irq_enter(chip, desc);
+
+	spin_lock(&irq_controller_lock);
+	status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
+	spin_unlock(&irq_controller_lock);
+	status &= chip_data->irq_mask;
+
+	if (status == 0)
+		goto out;
+
+	combiner_irq = __ffs(status);
+
+	cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
+	if (unlikely(cascade_irq >= NR_IRQS))
+		do_bad_IRQ(cascade_irq, desc);
+	else
+		generic_handle_irq(cascade_irq);
+
+ out:
+	chained_irq_exit(chip, desc);
+}
+
+static struct irq_chip combiner_chip = {
+	.name		= "COMBINER",
+	.irq_mask	= combiner_mask_irq,
+	.irq_unmask	= combiner_unmask_irq,
+};
+
+static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
+{
+	if (combiner_nr >= MAX_COMBINER_NR)
+		BUG();
+	if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
+		BUG();
+	irq_set_chained_handler(irq, combiner_handle_cascade_irq);
+}
+
+static void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
+			  unsigned int irq_start)
+{
+	unsigned int i;
+
+	if (combiner_nr >= MAX_COMBINER_NR)
+		BUG();
+
+	combiner_data[combiner_nr].base = base;
+	combiner_data[combiner_nr].irq_offset = irq_start;
+	combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
+
+	/* Disable all interrupts */
+
+	__raw_writel(combiner_data[combiner_nr].irq_mask,
+		     base + COMBINER_ENABLE_CLEAR);
+
+	/* Setup the Linux IRQ subsystem */
+
+	for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
+				+ MAX_IRQ_IN_COMBINER; i++) {
+		irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq);
+		irq_set_chip_data(i, &combiner_data[combiner_nr]);
+		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+	}
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id exynos4_dt_irq_match[] = {
+	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+	{},
+};
+#endif
+
+void __init exynos4_init_irq(void)
+{
+	int irq;
+	unsigned int gic_bank_offset;
+
+	gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
+
+	if (!of_have_populated_dt())
+		gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset);
+#ifdef CONFIG_OF
+	else
+		of_irq_init(exynos4_dt_irq_match);
+#endif
+
+	for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
+
+		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
+				COMBINER_IRQ(irq, 0));
+		combiner_cascade_irq(irq, IRQ_SPI(irq));
+	}
+
+	/*
+	 * The parameters of s5p_init_irq() are for VIC init.
+	 * Theses parameters should be NULL and 0 because EXYNOS4
+	 * uses GIC instead of VIC.
+	 */
+	s5p_init_irq(NULL, 0);
+}
+
+struct bus_type exynos4_subsys = {
+	.name		= "exynos4-core",
+	.dev_name	= "exynos4-core",
+};
+
+static struct device exynos4_dev = {
+	.bus	= &exynos4_subsys,
+};
+
+static int __init exynos4_core_init(void)
+{
+	return subsys_system_register(&exynos4_subsys, NULL);
+}
+core_initcall(exynos4_core_init);
+
+#ifdef CONFIG_CACHE_L2X0
+static int __init exynos4_l2x0_cache_init(void)
+{
+	/* TAG, Data Latency Control: 2cycle */
+	__raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
+
+	if (soc_is_exynos4210())
+		__raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+	else if (soc_is_exynos4212() || soc_is_exynos4412())
+		__raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+
+	/* L2X0 Prefetch Control */
+	__raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
+
+	/* L2X0 Power Control */
+	__raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN,
+		     S5P_VA_L2CC + L2X0_POWER_CTRL);
+
+	l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff);
+
+	return 0;
+}
+
+early_initcall(exynos4_l2x0_cache_init);
+#endif
+
+int __init exynos_init(void)
+{
+	printk(KERN_INFO "EXYNOS: Initializing architecture\n");
+
+	/* set idle function */
+	pm_idle = exynos_idle;
+
+	return device_register(&exynos4_dev);
+}
+
+/* uart registration process */
+
+void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	struct s3c2410_uartcfg *tcfg = cfg;
+	u32 ucnt;
+
+	for (ucnt = 0; ucnt < no; ucnt++, tcfg++)
+		tcfg->has_fracval = 1;
+
+	s3c24xx_init_uartdevs("exynos4210-uart", s5p_uart_resources, cfg, no);
+}
+
+static DEFINE_SPINLOCK(eint_lock);
+
+static unsigned int eint0_15_data[16];
+
+static unsigned int exynos4_get_irq_nr(unsigned int number)
+{
+	u32 ret = 0;
+
+	switch (number) {
+	case 0 ... 3:
+		ret = (number + IRQ_EINT0);
+		break;
+	case 4 ... 7:
+		ret = (number + (IRQ_EINT4 - 4));
+		break;
+	case 8 ... 15:
+		ret = (number + (IRQ_EINT8 - 8));
+		break;
+	default:
+		printk(KERN_ERR "number available : %d\n", number);
+	}
+
+	return ret;
+}
+
+static inline void exynos4_irq_eint_mask(struct irq_data *data)
+{
+	u32 mask;
+
+	spin_lock(&eint_lock);
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	mask |= eint_irq_to_bit(data->irq);
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	spin_unlock(&eint_lock);
+}
+
+static void exynos4_irq_eint_unmask(struct irq_data *data)
+{
+	u32 mask;
+
+	spin_lock(&eint_lock);
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	mask &= ~(eint_irq_to_bit(data->irq));
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	spin_unlock(&eint_lock);
+}
+
+static inline void exynos4_irq_eint_ack(struct irq_data *data)
+{
+	__raw_writel(eint_irq_to_bit(data->irq),
+		     S5P_EINT_PEND(EINT_REG_NR(data->irq)));
+}
+
+static void exynos4_irq_eint_maskack(struct irq_data *data)
+{
+	exynos4_irq_eint_mask(data);
+	exynos4_irq_eint_ack(data);
+}
+
+static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type)
+{
+	int offs = EINT_OFFSET(data->irq);
+	int shift;
+	u32 ctrl, mask;
+	u32 newvalue = 0;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		newvalue = S5P_IRQ_TYPE_EDGE_RISING;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
+		break;
+
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -EINVAL;
+	}
+
+	shift = (offs & 0x7) * 4;
+	mask = 0x7 << shift;
+
+	spin_lock(&eint_lock);
+	ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
+	ctrl &= ~mask;
+	ctrl |= newvalue << shift;
+	__raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
+	spin_unlock(&eint_lock);
+
+	switch (offs) {
+	case 0 ... 7:
+		s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
+		break;
+	case 8 ... 15:
+		s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
+		break;
+	case 16 ... 23:
+		s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
+		break;
+	case 24 ... 31:
+		s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
+		break;
+	default:
+		printk(KERN_ERR "No such irq number %d", offs);
+	}
+
+	return 0;
+}
+
+static struct irq_chip exynos4_irq_eint = {
+	.name		= "exynos4-eint",
+	.irq_mask	= exynos4_irq_eint_mask,
+	.irq_unmask	= exynos4_irq_eint_unmask,
+	.irq_mask_ack	= exynos4_irq_eint_maskack,
+	.irq_ack	= exynos4_irq_eint_ack,
+	.irq_set_type	= exynos4_irq_eint_set_type,
+#ifdef CONFIG_PM
+	.irq_set_wake	= s3c_irqext_wake,
+#endif
+};
+
+/*
+ * exynos4_irq_demux_eint
+ *
+ * This function demuxes the IRQ from from EINTs 16 to 31.
+ * It is designed to be inlined into the specific handler
+ * s5p_irq_demux_eintX_Y.
+ *
+ * Each EINT pend/mask registers handle eight of them.
+ */
+static inline void exynos4_irq_demux_eint(unsigned int start)
+{
+	unsigned int irq;
+
+	u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
+	u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
+
+	status &= ~mask;
+	status &= 0xff;
+
+	while (status) {
+		irq = fls(status) - 1;
+		generic_handle_irq(irq + start);
+		status &= ~(1 << irq);
+	}
+}
+
+static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_get_chip(irq);
+	chained_irq_enter(chip, desc);
+	exynos4_irq_demux_eint(IRQ_EINT(16));
+	exynos4_irq_demux_eint(IRQ_EINT(24));
+	chained_irq_exit(chip, desc);
+}
+
+static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
+{
+	u32 *irq_data = irq_get_handler_data(irq);
+	struct irq_chip *chip = irq_get_chip(irq);
+
+	chained_irq_enter(chip, desc);
+	chip->irq_mask(&desc->irq_data);
+
+	if (chip->irq_ack)
+		chip->irq_ack(&desc->irq_data);
+
+	generic_handle_irq(*irq_data);
+
+	chip->irq_unmask(&desc->irq_data);
+	chained_irq_exit(chip, desc);
+}
+
+int __init exynos4_init_irq_eint(void)
+{
+	int irq;
+
+	for (irq = 0 ; irq <= 31 ; irq++) {
+		irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint,
+					 handle_level_irq);
+		set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
+	}
+
+	irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
+
+	for (irq = 0 ; irq <= 15 ; irq++) {
+		eint0_15_data[irq] = IRQ_EINT(irq);
+
+		irq_set_handler_data(exynos4_get_irq_nr(irq),
+				     &eint0_15_data[irq]);
+		irq_set_chained_handler(exynos4_get_irq_nr(irq),
+					exynos4_irq_eint0_15);
+	}
+
+	return 0;
+}
+arch_initcall(exynos4_init_irq_eint);
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
new file mode 100644
index 00000000000..1ac49de0f39
--- /dev/null
+++ b/arch/arm/mach-exynos/common.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Common Header for EXYNOS machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
+#define __ARCH_ARM_MACH_EXYNOS_COMMON_H
+
+void exynos_init_io(struct map_desc *mach_desc, int size);
+void exynos4_init_irq(void);
+
+void exynos4_register_clocks(void);
+void exynos4_setup_clocks(void);
+
+void exynos4210_register_clocks(void);
+void exynos4212_register_clocks(void);
+
+void exynos4_restart(char mode, const char *cmd);
+
+extern struct sys_timer exynos4_timer;
+
+#ifdef CONFIG_ARCH_EXYNOS
+extern  int exynos_init(void);
+extern void exynos4_map_io(void);
+extern void exynos4_init_clocks(int xtal);
+extern void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define exynos4_init_clocks NULL
+#define exynos4_init_uarts NULL
+#define exynos4_map_io NULL
+#define exynos_init NULL
+#endif
+
+#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
diff --git a/arch/arm/mach-exynos/cpu.c b/arch/arm/mach-exynos/cpu.c
deleted file mode 100644
index 90ec247f3b3..00000000000
--- a/arch/arm/mach-exynos/cpu.c
+++ /dev/null
@@ -1,298 +0,0 @@
-/* linux/arch/arm/mach-exynos/cpu.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/sched.h>
-#include <linux/sysdev.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/proc-fns.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
-
-#include <plat/cpu.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/exynos4.h>
-#include <plat/adc-core.h>
-#include <plat/sdhci.h>
-#include <plat/fb-core.h>
-#include <plat/fimc-core.h>
-#include <plat/iic-core.h>
-#include <plat/reset.h>
-#include <plat/tv-core.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-pmu.h>
-
-unsigned int gic_bank_offset __read_mostly;
-
-extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
-			 unsigned int irq_start);
-extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
-
-/* Initial IO mappings */
-static struct map_desc exynos_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
-		.pfn		= __phys_to_pfn(EXYNOS_PA_SYSTIMER),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_PMU,
-		.pfn		= __phys_to_pfn(EXYNOS_PA_PMU),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_COMBINER_BASE,
-		.pfn		= __phys_to_pfn(EXYNOS_PA_COMBINER),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GIC_CPU,
-		.pfn		= __phys_to_pfn(EXYNOS_PA_GIC_CPU),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GIC_DIST,
-		.pfn		= __phys_to_pfn(EXYNOS_PA_GIC_DIST),
-		.length		= SZ_64K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(S3C_PA_UART),
-		.length		= SZ_512K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc exynos4_iodesc[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_CMU,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_CMU),
-		.length		= SZ_128K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_COREPERI_BASE,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_COREPERI),
-		.length		= SZ_8K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_L2CC,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_L2CC),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GPIO1,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_GPIO1),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GPIO2,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_GPIO2),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_GPIO3,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_GPIO3),
-		.length		= SZ_256,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_DMC0,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_DMC0),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SROMC,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SROMC),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_HSPHY),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc exynos4_iodesc0[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_SYSRAM,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc exynos4_iodesc1[] __initdata = {
-	{
-		.virtual	= (unsigned long)S5P_VA_SYSRAM,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static void exynos_idle(void)
-{
-	if (!need_resched())
-		cpu_do_idle();
-
-	local_irq_enable();
-}
-
-static void exynos4_sw_reset(void)
-{
-	__raw_writel(0x1, S5P_SWRESET);
-}
-
-/*
- * exynos_map_io
- *
- * register the standard cpu IO areas
- */
-void __init exynos4_map_io(void)
-{
-	iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc));
-	iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
-
-	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
-		iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
-	else
-		iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
-
-	/* initialize device information early */
-	exynos4_default_sdhci0();
-	exynos4_default_sdhci1();
-	exynos4_default_sdhci2();
-	exynos4_default_sdhci3();
-
-	s3c_adc_setname("samsung-adc-v3");
-
-	s3c_fimc_setname(0, "exynos4-fimc");
-	s3c_fimc_setname(1, "exynos4-fimc");
-	s3c_fimc_setname(2, "exynos4-fimc");
-	s3c_fimc_setname(3, "exynos4-fimc");
-
-	/* The I2C bus controllers are directly compatible with s3c2440 */
-	s3c_i2c0_setname("s3c2440-i2c");
-	s3c_i2c1_setname("s3c2440-i2c");
-	s3c_i2c2_setname("s3c2440-i2c");
-
-	s5p_fb_setname(0, "exynos4-fb");
-	s5p_hdmi_setname("exynos4-hdmi");
-}
-
-void __init exynos4_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
-	s3c24xx_register_baseclocks(xtal);
-	s5p_register_clocks(xtal);
-
-	if (soc_is_exynos4210())
-		exynos4210_register_clocks();
-	else if (soc_is_exynos4212() || soc_is_exynos4412())
-		exynos4212_register_clocks();
-
-	exynos4_register_clocks();
-	exynos4_setup_clocks();
-}
-
-static void exynos4_gic_irq_fix_base(struct irq_data *d)
-{
-	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
-
-	gic_data->cpu_base = S5P_VA_GIC_CPU +
-			    (gic_bank_offset * smp_processor_id());
-
-	gic_data->dist_base = S5P_VA_GIC_DIST +
-			    (gic_bank_offset * smp_processor_id());
-}
-
-void __init exynos4_init_irq(void)
-{
-	int irq;
-
-	gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
-
-	gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
-	gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
-	gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
-	gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
-
-	for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
-
-		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
-				COMBINER_IRQ(irq, 0));
-		combiner_cascade_irq(irq, IRQ_SPI(irq));
-	}
-
-	/* The parameters of s5p_init_irq() are for VIC init.
-	 * Theses parameters should be NULL and 0 because EXYNOS4
-	 * uses GIC instead of VIC.
-	 */
-	s5p_init_irq(NULL, 0);
-}
-
-struct sysdev_class exynos4_sysclass = {
-	.name	= "exynos4-core",
-};
-
-static struct sys_device exynos4_sysdev = {
-	.cls	= &exynos4_sysclass,
-};
-
-static int __init exynos4_core_init(void)
-{
-	return sysdev_class_register(&exynos4_sysclass);
-}
-core_initcall(exynos4_core_init);
-
-#ifdef CONFIG_CACHE_L2X0
-static int __init exynos4_l2x0_cache_init(void)
-{
-	/* TAG, Data Latency Control: 2cycle */
-	__raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
-
-	if (soc_is_exynos4210())
-		__raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
-	else if (soc_is_exynos4212() || soc_is_exynos4412())
-		__raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
-
-	/* L2X0 Prefetch Control */
-	__raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
-
-	/* L2X0 Power Control */
-	__raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN,
-		     S5P_VA_L2CC + L2X0_POWER_CTRL);
-
-	l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff);
-
-	return 0;
-}
-
-early_initcall(exynos4_l2x0_cache_init);
-#endif
-
-int __init exynos_init(void)
-{
-	printk(KERN_INFO "EXYNOS: Initializing architecture\n");
-
-	/* set idle function */
-	pm_idle = exynos_idle;
-
-	/* set sw_reset function */
-	if (soc_is_exynos4210() || soc_is_exynos4212() || soc_is_exynos4412())
-		s5p_reset_hook = exynos4_sw_reset;
-
-	return sysdev_register(&exynos4_sysdev);
-}
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index 35f6502144a..4ebb382c597 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -12,6 +12,8 @@
 #include <linux/init.h>
 #include <linux/cpuidle.h>
 #include <linux/io.h>
+#include <linux/export.h>
+#include <linux/time.h>
 
 #include <asm/proc-fns.h>
 
diff --git a/arch/arm/mach-exynos/dev-ohci.c b/arch/arm/mach-exynos/dev-ohci.c
new file mode 100644
index 00000000000..b8e75300c77
--- /dev/null
+++ b/arch/arm/mach-exynos/dev-ohci.c
@@ -0,0 +1,52 @@
+/* linux/arch/arm/mach-exynos/dev-ohci.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * EXYNOS - OHCI support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <mach/ohci.h>
+
+#include <plat/devs.h>
+#include <plat/usb-phy.h>
+
+static struct resource exynos4_ohci_resource[] = {
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_OHCI, SZ_256),
+	[1] = DEFINE_RES_IRQ(IRQ_USB_HOST),
+};
+
+static u64 exynos4_ohci_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device exynos4_device_ohci = {
+	.name		= "exynos-ohci",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(exynos4_ohci_resource),
+	.resource	= exynos4_ohci_resource,
+	.dev		= {
+		.dma_mask		= &exynos4_ohci_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
+};
+
+void __init exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd)
+{
+	struct exynos4_ohci_platdata *npd;
+
+	npd = s3c_set_platdata(pd, sizeof(struct exynos4_ohci_platdata),
+			&exynos4_device_ohci);
+
+	if (!npd->phy_init)
+		npd->phy_init = s5p_usb_phy_init;
+	if (!npd->phy_exit)
+		npd->phy_exit = s5p_usb_phy_exit;
+}
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
index 9667c61e64f..b10fcd270f0 100644
--- a/arch/arm/mach-exynos/dma.c
+++ b/arch/arm/mach-exynos/dma.c
@@ -24,6 +24,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl330.h>
+#include <linux/of.h>
 
 #include <asm/irq.h>
 #include <plat/devs.h>
@@ -35,95 +36,42 @@
 
 static u64 dma_dmamask = DMA_BIT_MASK(32);
 
-struct dma_pl330_peri pdma0_peri[28] = {
-	{
-		.peri_id = (u8)DMACH_PCM0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_PCM0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_PCM2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_PCM2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_MSM_REQ0,
-	}, {
-		.peri_id = (u8)DMACH_MSM_REQ2,
-	}, {
-		.peri_id = (u8)DMACH_SPI0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SPI0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SPI2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SPI2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S0S_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART4_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART4_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SLIMBUS0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SLIMBUS0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SLIMBUS2_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SLIMBUS2_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SLIMBUS4_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SLIMBUS4_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_AC97_MICIN,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_AC97_PCMIN,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_AC97_PCMOUT,
-		.rqtype = MEMTODEV,
-	},
+u8 pdma0_peri[] = {
+	DMACH_PCM0_RX,
+	DMACH_PCM0_TX,
+	DMACH_PCM2_RX,
+	DMACH_PCM2_TX,
+	DMACH_MSM_REQ0,
+	DMACH_MSM_REQ2,
+	DMACH_SPI0_RX,
+	DMACH_SPI0_TX,
+	DMACH_SPI2_RX,
+	DMACH_SPI2_TX,
+	DMACH_I2S0S_TX,
+	DMACH_I2S0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S2_RX,
+	DMACH_I2S2_TX,
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART2_RX,
+	DMACH_UART2_TX,
+	DMACH_UART4_RX,
+	DMACH_UART4_TX,
+	DMACH_SLIMBUS0_RX,
+	DMACH_SLIMBUS0_TX,
+	DMACH_SLIMBUS2_RX,
+	DMACH_SLIMBUS2_TX,
+	DMACH_SLIMBUS4_RX,
+	DMACH_SLIMBUS4_TX,
+	DMACH_AC97_MICIN,
+	DMACH_AC97_PCMIN,
+	DMACH_AC97_PCMOUT,
 };
 
 struct dma_pl330_platdata exynos4_pdma0_pdata = {
 	.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
-	.peri = pdma0_peri,
+	.peri_id = pdma0_peri,
 };
 
 struct amba_device exynos4_device_pdma0 = {
@@ -142,86 +90,37 @@ struct amba_device exynos4_device_pdma0 = {
 	.periphid = 0x00041330,
 };
 
-struct dma_pl330_peri pdma1_peri[25] = {
-	{
-		.peri_id = (u8)DMACH_PCM0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_PCM0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_PCM1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_PCM1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_MSM_REQ1,
-	}, {
-		.peri_id = (u8)DMACH_MSM_REQ3,
-	}, {
-		.peri_id = (u8)DMACH_SPI1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SPI1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S0S_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_I2S1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_I2S1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART0_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART0_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_UART3_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_UART3_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SLIMBUS1_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SLIMBUS1_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SLIMBUS3_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SLIMBUS3_TX,
-		.rqtype = MEMTODEV,
-	}, {
-		.peri_id = (u8)DMACH_SLIMBUS5_RX,
-		.rqtype = DEVTOMEM,
-	}, {
-		.peri_id = (u8)DMACH_SLIMBUS5_TX,
-		.rqtype = MEMTODEV,
-	},
+u8 pdma1_peri[] = {
+	DMACH_PCM0_RX,
+	DMACH_PCM0_TX,
+	DMACH_PCM1_RX,
+	DMACH_PCM1_TX,
+	DMACH_MSM_REQ1,
+	DMACH_MSM_REQ3,
+	DMACH_SPI1_RX,
+	DMACH_SPI1_TX,
+	DMACH_I2S0S_TX,
+	DMACH_I2S0_RX,
+	DMACH_I2S0_TX,
+	DMACH_I2S1_RX,
+	DMACH_I2S1_TX,
+	DMACH_UART0_RX,
+	DMACH_UART0_TX,
+	DMACH_UART1_RX,
+	DMACH_UART1_TX,
+	DMACH_UART3_RX,
+	DMACH_UART3_TX,
+	DMACH_SLIMBUS1_RX,
+	DMACH_SLIMBUS1_TX,
+	DMACH_SLIMBUS3_RX,
+	DMACH_SLIMBUS3_TX,
+	DMACH_SLIMBUS5_RX,
+	DMACH_SLIMBUS5_TX,
 };
 
 struct dma_pl330_platdata exynos4_pdma1_pdata = {
 	.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
-	.peri = pdma1_peri,
+	.peri_id = pdma1_peri,
 };
 
 struct amba_device exynos4_device_pdma1 = {
@@ -242,7 +141,15 @@ struct amba_device exynos4_device_pdma1 = {
 
 static int __init exynos4_dma_init(void)
 {
+	if (of_have_populated_dt())
+		return 0;
+
+	dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask);
+	dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask);
 	amba_device_register(&exynos4_device_pdma0, &iomem_resource);
+
+	dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask);
+	dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask);
 	amba_device_register(&exynos4_device_pdma1, &iomem_resource);
 
 	return 0;
diff --git a/arch/arm/mach-exynos/headsmp.S b/arch/arm/mach-exynos/headsmp.S
index 3cdeb364754..5364d4bfa8b 100644
--- a/arch/arm/mach-exynos/headsmp.S
+++ b/arch/arm/mach-exynos/headsmp.S
@@ -36,6 +36,8 @@ pen:	ldr	r7, [r6]
 	 * should now contain the SVC stack for this core
 	 */
 	b	secondary_startup
+ENDPROC(exynos4_secondary_startup)
 
+	.align 2
 1:	.long	.
 	.long	pen_release
diff --git a/arch/arm/mach-exynos/include/mach/cpufreq.h b/arch/arm/mach-exynos/include/mach/cpufreq.h
new file mode 100644
index 00000000000..3df27f2d503
--- /dev/null
+++ b/arch/arm/mach-exynos/include/mach/cpufreq.h
@@ -0,0 +1,34 @@
+/* linux/arch/arm/mach-exynos/include/mach/cpufreq.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * EXYNOS - CPUFreq support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+enum cpufreq_level_index {
+	L0, L1, L2, L3, L4,
+	L5, L6, L7, L8, L9,
+	L10, L11, L12, L13, L14,
+	L15, L16, L17, L18, L19,
+	L20,
+};
+
+struct exynos_dvfs_info {
+	unsigned long	mpll_freq_khz;
+	unsigned int	pll_safe_idx;
+	unsigned int	pm_lock_idx;
+	unsigned int	max_support_idx;
+	unsigned int	min_support_idx;
+	struct clk	*cpu_clk;
+	unsigned int	*volt_table;
+	struct cpufreq_frequency_table	*freq_table;
+	void (*set_freq)(unsigned int, unsigned int);
+	bool (*need_apll_change)(unsigned int, unsigned int);
+};
+
+extern int exynos4210_cpufreq_init(struct exynos_dvfs_info *);
diff --git a/arch/arm/mach-exynos/include/mach/entry-macro.S b/arch/arm/mach-exynos/include/mach/entry-macro.S
index f5e9fd8e37b..3ba4f547534 100644
--- a/arch/arm/mach-exynos/include/mach/entry-macro.S
+++ b/arch/arm/mach-exynos/include/mach/entry-macro.S
@@ -9,83 +9,8 @@
  * warranty of any kind, whether express or implied.
 */
 
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <asm/hardware/gic.h>
-
 		.macro	disable_fiq
 		.endm
 
-		.macro  get_irqnr_preamble, base, tmp
-		mov	\tmp, #0
-
-		mrc	p15, 0, \base, c0, c0, 5
-		and	\base, \base, #3
-		cmp	\base, #0
-		beq	1f
-
-		ldr	\tmp, =gic_bank_offset
-		ldr	\tmp, [\tmp]
-		cmp	\base, #1
-		beq	1f
-
-		cmp	\base, #2
-		addeq	\tmp, \tmp, \tmp
-		addne	\tmp, \tmp, \tmp, LSL #1
-
-1:		ldr	\base, =gic_cpu_base_addr
-		ldr	\base, [\base]
-		add	\base, \base, \tmp
-		.endm
-
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
-
-		/*
-		 * The interrupt numbering scheme is defined in the
-		 * interrupt controller spec.  To wit:
-		 *
-		 * Interrupts 0-15 are IPI
-		 * 16-28 are reserved
-		 * 29-31 are local.  We allow 30 to be used for the watchdog.
-		 * 32-1020 are global
-		 * 1021-1022 are reserved
-		 * 1023 is "spurious" (no interrupt)
-		 *
-		 * For now, we ignore all local interrupts so only return an interrupt if it's
-		 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
-		 *
-		 * A simple read from the controller will tell us the number of the highest
-                 * priority enabled interrupt.  We then just need to check whether it is in the
-		 * valid range for an IRQ (30-1020 inclusive).
-		 */
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
-
-		ldr	\tmp, =1021
-
-		bic     \irqnr, \irqstat, #0x1c00
-
-		cmp     \irqnr, #15
-		cmpcc	\irqnr, \irqnr
-		cmpne	\irqnr, \tmp
-		cmpcs	\irqnr, \irqnr
-		addne	\irqnr, \irqnr, #32
-
-		.endm
-
-		/* We assume that irqstat (the raw value of the IRQ acknowledge
-		 * register) is preserved from the macro above.
-		 * If there is an IPI, we immediately signal end of interrupt on the
-		 * controller, since this requires the original irqstat value which
-		 * we won't easily be able to recreate later.
-		 */
-
-		.macro test_for_ipi, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		cmp	\irqnr, #16
-		strcc	\irqstat, [\base, #GIC_CPU_EOI]
-		cmpcs	\irqnr, \irqnr
-		.endm
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index dfd4b7eecb9..f77bce04789 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -17,13 +17,13 @@
 
 /* PPI: Private Peripheral Interrupt */
 
-#define IRQ_PPI(x)		S5P_IRQ(x+16)
+#define IRQ_PPI(x)		(x+16)
 
 #define IRQ_MCT_LOCALTIMER	IRQ_PPI(12)
 
 /* SPI: Shared Peripheral Interrupt */
 
-#define IRQ_SPI(x)		S5P_IRQ(x+32)
+#define IRQ_SPI(x)		(x+32)
 
 #define IRQ_EINT0		IRQ_SPI(16)
 #define IRQ_EINT1		IRQ_SPI(17)
@@ -72,6 +72,9 @@
 #define IRQ_IIC5		IRQ_SPI(63)
 #define IRQ_IIC6		IRQ_SPI(64)
 #define IRQ_IIC7		IRQ_SPI(65)
+#define IRQ_SPI0		IRQ_SPI(66)
+#define IRQ_SPI1		IRQ_SPI(67)
+#define IRQ_SPI2		IRQ_SPI(68)
 
 #define IRQ_USB_HOST		IRQ_SPI(70)
 #define IRQ_USB_HSOTG		IRQ_SPI(71)
@@ -163,7 +166,9 @@
 #define IRQ_GPIO2_NR_GROUPS	9
 #define IRQ_GPIO_END		(S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT)
 
+#define IRQ_TIMER_BASE		(IRQ_GPIO_END + 64)
+
 /* Set the default NR_IRQS */
-#define NR_IRQS			(IRQ_GPIO_END + 64)
+#define NR_IRQS			(IRQ_TIMER_BASE + IRQ_TIMER_COUNT)
 
 #endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 058541d45af..c754a22a2bb 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -87,6 +87,10 @@
 #define EXYNOS4_PA_SYSMMU_TV		0x12E20000
 #define EXYNOS4_PA_SYSMMU_MFC_L		0x13620000
 #define EXYNOS4_PA_SYSMMU_MFC_R		0x13630000
+#define EXYNOS4_PA_SPI0			0x13920000
+#define EXYNOS4_PA_SPI1			0x13930000
+#define EXYNOS4_PA_SPI2			0x13940000
+
 
 #define EXYNOS4_PA_GPIO1		0x11400000
 #define EXYNOS4_PA_GPIO2		0x11000000
@@ -107,6 +111,7 @@
 #define EXYNOS4_PA_SROMC		0x12570000
 
 #define EXYNOS4_PA_EHCI			0x12580000
+#define EXYNOS4_PA_OHCI			0x12590000
 #define EXYNOS4_PA_HSPHY		0x125B0000
 #define EXYNOS4_PA_MFC			0x13400000
 
@@ -148,8 +153,10 @@
 #define S3C_PA_RTC			EXYNOS4_PA_RTC
 #define S3C_PA_WDT			EXYNOS4_PA_WATCHDOG
 #define S3C_PA_UART			EXYNOS4_PA_UART
+#define S3C_PA_SPI0			EXYNOS4_PA_SPI0
+#define S3C_PA_SPI1			EXYNOS4_PA_SPI1
+#define S3C_PA_SPI2			EXYNOS4_PA_SPI2
 
-#define S5P_PA_CHIPID			EXYNOS4_PA_CHIPID
 #define S5P_PA_EHCI			EXYNOS4_PA_EHCI
 #define S5P_PA_FIMC0			EXYNOS4_PA_FIMC0
 #define S5P_PA_FIMC1			EXYNOS4_PA_FIMC1
@@ -166,26 +173,17 @@
 #define S5P_PA_ONENAND_DMA		EXYNOS4_PA_ONENAND_DMA
 #define S5P_PA_SDO			EXYNOS4_PA_SDO
 #define S5P_PA_SDRAM			EXYNOS4_PA_SDRAM
-#define S5P_PA_SROMC			EXYNOS4_PA_SROMC
-#define S5P_PA_SYSCON			EXYNOS4_PA_SYSCON
-#define S5P_PA_TIMER			EXYNOS4_PA_TIMER
 #define S5P_PA_VP			EXYNOS4_PA_VP
 
 #define SAMSUNG_PA_ADC			EXYNOS4_PA_ADC
 #define SAMSUNG_PA_ADC1			EXYNOS4_PA_ADC1
 #define SAMSUNG_PA_KEYPAD		EXYNOS4_PA_KEYPAD
 
-#define EXYNOS_PA_COMBINER		EXYNOS4_PA_COMBINER
-#define EXYNOS_PA_GIC_CPU		EXYNOS4_PA_GIC_CPU
-#define EXYNOS_PA_GIC_DIST		EXYNOS4_PA_GIC_DIST
-#define EXYNOS_PA_PMU			EXYNOS4_PA_PMU
-#define EXYNOS_PA_SYSTIMER		EXYNOS4_PA_SYSTIMER
-
 /* Compatibility UART */
 
 #define S3C_VA_UARTx(x)			(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
 
-#define S5P_PA_UART(x)			(S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART(x)			(EXYNOS4_PA_UART + ((x) * S3C_UART_OFFSET))
 #define S5P_PA_UART0			S5P_PA_UART(0)
 #define S5P_PA_UART1			S5P_PA_UART(1)
 #define S5P_PA_UART2			S5P_PA_UART(2)
diff --git a/arch/arm/mach-exynos/include/mach/ohci.h b/arch/arm/mach-exynos/include/mach/ohci.h
new file mode 100644
index 00000000000..c256c595be5
--- /dev/null
+++ b/arch/arm/mach-exynos/include/mach/ohci.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MACH_EXYNOS_OHCI_H
+#define __MACH_EXYNOS_OHCI_H
+
+struct exynos4_ohci_platdata {
+	int (*phy_init)(struct platform_device *pdev, int type);
+	int (*phy_exit)(struct platform_device *pdev, int type);
+};
+
+extern void exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd);
+
+#endif /* __MACH_EXYNOS_OHCI_H */
diff --git a/arch/arm/mach-exynos/include/mach/spi-clocks.h b/arch/arm/mach-exynos/include/mach/spi-clocks.h
new file mode 100644
index 00000000000..576efdf6d09
--- /dev/null
+++ b/arch/arm/mach-exynos/include/mach/spi-clocks.h
@@ -0,0 +1,16 @@
+/* linux/arch/arm/mach-exynos4/include/mach/spi-clocks.h
+ *
+ * Copyright (C) 2011 Samsung Electronics Co. Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_SPI_CLKS_H
+#define __ASM_ARCH_SPI_CLKS_H __FILE__
+
+/* Must source from SCLK_SPI */
+#define EXYNOS4_SPI_SRCCLK_SCLK		0
+
+#endif /* __ASM_ARCH_SPI_CLKS_H */
diff --git a/arch/arm/mach-exynos/include/mach/system.h b/arch/arm/mach-exynos/include/mach/system.h
index 5e3220c18fc..0063a6de3dc 100644
--- a/arch/arm/mach-exynos/include/mach/system.h
+++ b/arch/arm/mach-exynos/include/mach/system.h
@@ -13,8 +13,6 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
-#include <plat/system-reset.h>
-
 static void arch_idle(void)
 {
 	/* nothing here yet */
diff --git a/arch/arm/mach-exynos/include/mach/vmalloc.h b/arch/arm/mach-exynos/include/mach/vmalloc.h
deleted file mode 100644
index 284330e571d..00000000000
--- a/arch/arm/mach-exynos/include/mach/vmalloc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/vmalloc.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * Based on arch/arm/mach-s5p6440/include/mach/vmalloc.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * EXYNOS4 vmalloc definition
-*/
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H __FILE__
-
-#define VMALLOC_END	0xF6000000UL
-
-#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-exynos/init.c b/arch/arm/mach-exynos/init.c
deleted file mode 100644
index a8a83e3881a..00000000000
--- a/arch/arm/mach-exynos/init.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/* linux/arch/arm/mach-exynos4/init.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/regs-serial.h>
-
-static struct s3c24xx_uart_clksrc exynos4_serial_clocks[] = {
-	[0] = {
-		.name		= "uclk1",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-};
-
-/* uart registration process */
-void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	struct s3c2410_uartcfg *tcfg = cfg;
-	u32 ucnt;
-
-	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
-		if (!tcfg->clocks) {
-			tcfg->has_fracval = 1;
-			tcfg->clocks = exynos4_serial_clocks;
-			tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks);
-		}
-		tcfg->flags |= NO_NEED_CHECK_CLKSRC;
-	}
-
-	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
-}
diff --git a/arch/arm/mach-exynos/irq-combiner.c b/arch/arm/mach-exynos/irq-combiner.c
deleted file mode 100644
index 5a2758ab055..00000000000
--- a/arch/arm/mach-exynos/irq-combiner.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/* linux/arch/arm/mach-exynos4/irq-combiner.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Based on arch/arm/common/gic.c
- *
- * IRQ COMBINER support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-
-#include <asm/mach/irq.h>
-
-#define COMBINER_ENABLE_SET	0x0
-#define COMBINER_ENABLE_CLEAR	0x4
-#define COMBINER_INT_STATUS	0xC
-
-static DEFINE_SPINLOCK(irq_controller_lock);
-
-struct combiner_chip_data {
-	unsigned int irq_offset;
-	unsigned int irq_mask;
-	void __iomem *base;
-};
-
-static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
-
-static inline void __iomem *combiner_base(struct irq_data *data)
-{
-	struct combiner_chip_data *combiner_data =
-		irq_data_get_irq_chip_data(data);
-
-	return combiner_data->base;
-}
-
-static void combiner_mask_irq(struct irq_data *data)
-{
-	u32 mask = 1 << (data->irq % 32);
-
-	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
-}
-
-static void combiner_unmask_irq(struct irq_data *data)
-{
-	u32 mask = 1 << (data->irq % 32);
-
-	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
-}
-
-static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
-{
-	struct combiner_chip_data *chip_data = irq_get_handler_data(irq);
-	struct irq_chip *chip = irq_get_chip(irq);
-	unsigned int cascade_irq, combiner_irq;
-	unsigned long status;
-
-	chained_irq_enter(chip, desc);
-
-	spin_lock(&irq_controller_lock);
-	status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
-	spin_unlock(&irq_controller_lock);
-	status &= chip_data->irq_mask;
-
-	if (status == 0)
-		goto out;
-
-	combiner_irq = __ffs(status);
-
-	cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
-	if (unlikely(cascade_irq >= NR_IRQS))
-		do_bad_IRQ(cascade_irq, desc);
-	else
-		generic_handle_irq(cascade_irq);
-
- out:
-	chained_irq_exit(chip, desc);
-}
-
-static struct irq_chip combiner_chip = {
-	.name		= "COMBINER",
-	.irq_mask	= combiner_mask_irq,
-	.irq_unmask	= combiner_unmask_irq,
-};
-
-void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
-{
-	if (combiner_nr >= MAX_COMBINER_NR)
-		BUG();
-	if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
-		BUG();
-	irq_set_chained_handler(irq, combiner_handle_cascade_irq);
-}
-
-void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
-			  unsigned int irq_start)
-{
-	unsigned int i;
-
-	if (combiner_nr >= MAX_COMBINER_NR)
-		BUG();
-
-	combiner_data[combiner_nr].base = base;
-	combiner_data[combiner_nr].irq_offset = irq_start;
-	combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
-
-	/* Disable all interrupts */
-
-	__raw_writel(combiner_data[combiner_nr].irq_mask,
-		     base + COMBINER_ENABLE_CLEAR);
-
-	/* Setup the Linux IRQ subsystem */
-
-	for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
-				+ MAX_IRQ_IN_COMBINER; i++) {
-		irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq);
-		irq_set_chip_data(i, &combiner_data[combiner_nr]);
-		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-	}
-}
diff --git a/arch/arm/mach-exynos/irq-eint.c b/arch/arm/mach-exynos/irq-eint.c
deleted file mode 100644
index badb8c66fc9..00000000000
--- a/arch/arm/mach-exynos/irq-eint.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/* linux/arch/arm/mach-exynos4/irq-eint.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - IRQ EINT support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/gpio.h>
-
-#include <plat/pm.h>
-#include <plat/cpu.h>
-#include <plat/gpio-cfg.h>
-
-#include <mach/regs-gpio.h>
-
-#include <asm/mach/irq.h>
-
-static DEFINE_SPINLOCK(eint_lock);
-
-static unsigned int eint0_15_data[16];
-
-static unsigned int exynos4_get_irq_nr(unsigned int number)
-{
-	u32 ret = 0;
-
-	switch (number) {
-	case 0 ... 3:
-		ret = (number + IRQ_EINT0);
-		break;
-	case 4 ... 7:
-		ret = (number + (IRQ_EINT4 - 4));
-		break;
-	case 8 ... 15:
-		ret = (number + (IRQ_EINT8 - 8));
-		break;
-	default:
-		printk(KERN_ERR "number available : %d\n", number);
-	}
-
-	return ret;
-}
-
-static inline void exynos4_irq_eint_mask(struct irq_data *data)
-{
-	u32 mask;
-
-	spin_lock(&eint_lock);
-	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-	mask |= eint_irq_to_bit(data->irq);
-	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-	spin_unlock(&eint_lock);
-}
-
-static void exynos4_irq_eint_unmask(struct irq_data *data)
-{
-	u32 mask;
-
-	spin_lock(&eint_lock);
-	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-	mask &= ~(eint_irq_to_bit(data->irq));
-	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-	spin_unlock(&eint_lock);
-}
-
-static inline void exynos4_irq_eint_ack(struct irq_data *data)
-{
-	__raw_writel(eint_irq_to_bit(data->irq),
-		     S5P_EINT_PEND(EINT_REG_NR(data->irq)));
-}
-
-static void exynos4_irq_eint_maskack(struct irq_data *data)
-{
-	exynos4_irq_eint_mask(data);
-	exynos4_irq_eint_ack(data);
-}
-
-static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
-	int offs = EINT_OFFSET(data->irq);
-	int shift;
-	u32 ctrl, mask;
-	u32 newvalue = 0;
-
-	switch (type) {
-	case IRQ_TYPE_EDGE_RISING:
-		newvalue = S5P_IRQ_TYPE_EDGE_RISING;
-		break;
-
-	case IRQ_TYPE_EDGE_FALLING:
-		newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
-		break;
-
-	case IRQ_TYPE_EDGE_BOTH:
-		newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
-		break;
-
-	case IRQ_TYPE_LEVEL_LOW:
-		newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
-		break;
-
-	case IRQ_TYPE_LEVEL_HIGH:
-		newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
-		break;
-
-	default:
-		printk(KERN_ERR "No such irq type %d", type);
-		return -EINVAL;
-	}
-
-	shift = (offs & 0x7) * 4;
-	mask = 0x7 << shift;
-
-	spin_lock(&eint_lock);
-	ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
-	ctrl &= ~mask;
-	ctrl |= newvalue << shift;
-	__raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
-	spin_unlock(&eint_lock);
-
-	switch (offs) {
-	case 0 ... 7:
-		s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
-		break;
-	case 8 ... 15:
-		s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
-		break;
-	case 16 ... 23:
-		s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
-		break;
-	case 24 ... 31:
-		s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
-		break;
-	default:
-		printk(KERN_ERR "No such irq number %d", offs);
-	}
-
-	return 0;
-}
-
-static struct irq_chip exynos4_irq_eint = {
-	.name		= "exynos4-eint",
-	.irq_mask	= exynos4_irq_eint_mask,
-	.irq_unmask	= exynos4_irq_eint_unmask,
-	.irq_mask_ack	= exynos4_irq_eint_maskack,
-	.irq_ack	= exynos4_irq_eint_ack,
-	.irq_set_type	= exynos4_irq_eint_set_type,
-#ifdef CONFIG_PM
-	.irq_set_wake	= s3c_irqext_wake,
-#endif
-};
-
-/* exynos4_irq_demux_eint
- *
- * This function demuxes the IRQ from from EINTs 16 to 31.
- * It is designed to be inlined into the specific handler
- * s5p_irq_demux_eintX_Y.
- *
- * Each EINT pend/mask registers handle eight of them.
- */
-static inline void exynos4_irq_demux_eint(unsigned int start)
-{
-	unsigned int irq;
-
-	u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
-	u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
-
-	status &= ~mask;
-	status &= 0xff;
-
-	while (status) {
-		irq = fls(status) - 1;
-		generic_handle_irq(irq + start);
-		status &= ~(1 << irq);
-	}
-}
-
-static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_get_chip(irq);
-	chained_irq_enter(chip, desc);
-	exynos4_irq_demux_eint(IRQ_EINT(16));
-	exynos4_irq_demux_eint(IRQ_EINT(24));
-	chained_irq_exit(chip, desc);
-}
-
-static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
-{
-	u32 *irq_data = irq_get_handler_data(irq);
-	struct irq_chip *chip = irq_get_chip(irq);
-
-	chained_irq_enter(chip, desc);
-	chip->irq_mask(&desc->irq_data);
-
-	if (chip->irq_ack)
-		chip->irq_ack(&desc->irq_data);
-
-	generic_handle_irq(*irq_data);
-
-	chip->irq_unmask(&desc->irq_data);
-	chained_irq_exit(chip, desc);
-}
-
-int __init exynos4_init_irq_eint(void)
-{
-	int irq;
-
-	for (irq = 0 ; irq <= 31 ; irq++) {
-		irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint,
-					 handle_level_irq);
-		set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
-	}
-
-	irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
-
-	for (irq = 0 ; irq <= 15 ; irq++) {
-		eint0_15_data[irq] = IRQ_EINT(irq);
-
-		irq_set_handler_data(exynos4_get_irq_nr(irq),
-				     &eint0_15_data[irq]);
-		irq_set_chained_handler(exynos4_get_irq_nr(irq),
-					exynos4_irq_eint0_15);
-	}
-
-	return 0;
-}
-
-arch_initcall(exynos4_init_irq_eint);
diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c
index f0ca6c157d2..d726fcd3acf 100644
--- a/arch/arm/mach-exynos/mach-armlex4210.c
+++ b/arch/arm/mach-exynos/mach-armlex4210.c
@@ -16,11 +16,11 @@
 #include <linux/smsc911x.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/exynos4.h>
 #include <plat/gpio-cfg.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-srom.h>
@@ -28,6 +28,8 @@
 
 #include <mach/map.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define ARMLEX4210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -187,7 +189,7 @@ static void __init armlex4210_smsc911x_init(void)
 
 static void __init armlex4210_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(armlex4210_uartcfgs,
 			   ARRAY_SIZE(armlex4210_uartcfgs));
@@ -210,6 +212,8 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= armlex4210_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= armlex4210_machine_init,
 	.timer		= &exynos4_timer,
+	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
new file mode 100644
index 00000000000..85fa02767d6
--- /dev/null
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -0,0 +1,85 @@
+/*
+ * Samsung's Exynos4210 flattened device tree enabled machine
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ *		www.linaro.org
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/of_platform.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/regs-serial.h>
+#include <plat/exynos4.h>
+
+/*
+ * The following lookup table is used to override device names when devices
+ * are registered from device tree. This is temporarily added to enable
+ * device tree support addition for the Exynos4 architecture.
+ *
+ * For drivers that require platform data to be provided from the machine
+ * file, a platform data pointer can also be supplied along with the
+ * devices names. Usually, the platform data elements that cannot be parsed
+ * from the device tree by the drivers (example: function pointers) are
+ * supplied. But it should be noted that this is a temporary mechanism and
+ * at some point, the drivers should be capable of parsing all the platform
+ * data from the device tree.
+ */
+static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {
+	OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART0,
+				"exynos4210-uart.0", NULL),
+	OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART1,
+				"exynos4210-uart.1", NULL),
+	OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART2,
+				"exynos4210-uart.2", NULL),
+	OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART3,
+				"exynos4210-uart.3", NULL),
+	OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(0),
+				"exynos4-sdhci.0", NULL),
+	OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(1),
+				"exynos4-sdhci.1", NULL),
+	OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(2),
+				"exynos4-sdhci.2", NULL),
+	OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(3),
+				"exynos4-sdhci.3", NULL),
+	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0),
+				"s3c2440-i2c.0", NULL),
+	OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL),
+	OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL),
+	{},
+};
+
+static void __init exynos4210_dt_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+}
+
+static void __init exynos4210_dt_machine_init(void)
+{
+	of_platform_populate(NULL, of_default_bus_match_table,
+				exynos4210_auxdata_lookup, NULL);
+}
+
+static char const *exynos4210_dt_compat[] __initdata = {
+	"samsung,exynos4210",
+	NULL
+};
+
+DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
+	/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
+	.init_irq	= exynos4_init_irq,
+	.map_io		= exynos4210_dt_map_io,
+	.init_machine	= exynos4210_dt_machine_init,
+	.timer		= &exynos4_timer,
+	.dt_compat	= exynos4210_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 236bbe18716..b895ec03110 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -32,12 +32,12 @@
 #include <media/v4l2-mediabus.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/adc.h>
 #include <plat/regs-fb-v4.h>
 #include <plat/regs-serial.h>
-#include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>
@@ -54,6 +54,8 @@
 
 #include <mach/map.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define NURI_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -247,13 +249,8 @@ static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power)
 
 static int nuri_bl_init(struct device *dev)
 {
-	int ret, gpio = EXYNOS4_GPE2(3);
-
-	ret = gpio_request(gpio, "LCD_LDO_EN");
-	if (!ret)
-		gpio_direction_output(gpio, 0);
-
-	return ret;
+	return gpio_request_one(EXYNOS4_GPE2(3), GPIOF_OUT_INIT_LOW,
+				"LCD_LD0_EN");
 }
 
 static int nuri_bl_notify(struct device *dev, int brightness)
@@ -1283,7 +1280,7 @@ static struct platform_device *nuri_devices[] __initdata = {
 
 static void __init nuri_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
 }
@@ -1333,7 +1330,9 @@ MACHINE_START(NURI, "NURI")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= nuri_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= nuri_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve        = &nuri_reserve,
+	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index f80b563f2be..0679b8ad2d1 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -22,13 +22,13 @@
 #include <linux/lcd.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <video/platform_lcd.h>
 
 #include <plat/regs-serial.h>
 #include <plat/regs-fb-v4.h>
-#include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/sdhci.h>
@@ -41,8 +41,11 @@
 #include <plat/fb.h>
 #include <plat/mfc.h>
 
+#include <mach/ohci.h>
 #include <mach/map.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define ORIGEN_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -483,6 +486,16 @@ static void __init origen_ehci_init(void)
 	s5p_ehci_set_platdata(pdata);
 }
 
+/* USB OHCI */
+static struct exynos4_ohci_platdata origen_ohci_pdata;
+
+static void __init origen_ohci_init(void)
+{
+	struct exynos4_ohci_platdata *pdata = &origen_ohci_pdata;
+
+	exynos4_ohci_set_platdata(pdata);
+}
+
 static struct gpio_keys_button origen_gpio_keys_table[] = {
 	{
 		.code			= KEY_MENU,
@@ -584,7 +597,8 @@ static struct s3c_fb_pd_win origen_fb_win0 = {
 static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
 	.win[0]		= &origen_fb_win0,
 	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
+				VIDCON1_INV_VCLK,
 	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
 };
 
@@ -606,6 +620,7 @@ static struct platform_device *origen_devices[] __initdata = {
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
 	&s5p_device_mixer,
+	&exynos4_device_ohci,
 	&exynos4_device_pd[PD_LCD0],
 	&exynos4_device_pd[PD_TV],
 	&exynos4_device_pd[PD_G3D],
@@ -638,7 +653,7 @@ static void s5p_tv_setup(void)
 
 static void __init origen_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
 }
@@ -670,6 +685,7 @@ static void __init origen_machine_init(void)
 	s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);
 
 	origen_ehci_init();
+	origen_ohci_init();
 	clk_xusbxti.rate = 24000000;
 
 	s5p_tv_setup();
@@ -694,7 +710,9 @@ MACHINE_START(ORIGEN, "ORIGEN")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= origen_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= origen_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve	= &origen_reserve,
+	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index fcf2e0e23d5..d00e4f016a6 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -21,13 +21,13 @@
 #include <linux/serial_core.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/backlight.h>
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/exynos4.h>
 #include <plat/gpio-cfg.h>
 #include <plat/iic.h>
 #include <plat/keypad.h>
@@ -36,6 +36,8 @@
 
 #include <mach/map.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define SMDK4X12_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -249,7 +251,7 @@ static void __init smdk4x12_map_io(void)
 {
 	clk_xusbxti.rate = 24000000;
 
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
 }
@@ -287,8 +289,10 @@ MACHINE_START(SMDK4212, "SMDK4212")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdk4x12_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdk4x12_machine_init,
 	.timer		= &exynos4_timer,
+	.restart	= exynos4_restart,
 MACHINE_END
 
 MACHINE_START(SMDK4412, "SMDK4412")
@@ -297,6 +301,8 @@ MACHINE_START(SMDK4412, "SMDK4412")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdk4x12_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdk4x12_machine_init,
 	.timer		= &exynos4_timer,
+	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index cec2afabe7b..b2c5557f50e 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -21,13 +21,13 @@
 #include <linux/pwm_backlight.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <video/platform_lcd.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-srom.h>
 #include <plat/regs-fb-v4.h>
-#include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>
@@ -42,6 +42,9 @@
 #include <plat/clock.h>
 
 #include <mach/map.h>
+#include <mach/ohci.h>
+
+#include "common.h"
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define SMDKV310_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -129,9 +132,7 @@ static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
 		gpio_free(EXYNOS4_GPD0(1));
 #endif
 		/* fire nRESET on power up */
-		gpio_request(EXYNOS4_GPX0(6), "GPX0");
-
-		gpio_direction_output(EXYNOS4_GPX0(6), 1);
+		gpio_request_one(EXYNOS4_GPX0(6), GPIOF_OUT_INIT_HIGH, "GPX0");
 		mdelay(100);
 
 		gpio_set_value(EXYNOS4_GPX0(6), 0);
@@ -245,6 +246,16 @@ static void __init smdkv310_ehci_init(void)
 	s5p_ehci_set_platdata(pdata);
 }
 
+/* USB OHCI */
+static struct exynos4_ohci_platdata smdkv310_ohci_pdata;
+
+static void __init smdkv310_ohci_init(void)
+{
+	struct exynos4_ohci_platdata *pdata = &smdkv310_ohci_pdata;
+
+	exynos4_ohci_set_platdata(pdata);
+}
+
 static struct platform_device *smdkv310_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
@@ -261,6 +272,7 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&s5p_device_fimc3,
 	&exynos4_device_ac97,
 	&exynos4_device_i2s0,
+	&exynos4_device_ohci,
 	&samsung_device_keypad,
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
@@ -332,7 +344,7 @@ static void s5p_tv_setup(void)
 
 static void __init smdkv310_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
 }
@@ -363,6 +375,7 @@ static void __init smdkv310_machine_init(void)
 	s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
 
 	smdkv310_ehci_init();
+	smdkv310_ohci_init();
 	clk_xusbxti.rate = 24000000;
 
 	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
@@ -375,9 +388,11 @@ MACHINE_START(SMDKV310, "SMDKV310")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkv310_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdkv310_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve	= &smdkv310_reserve,
+	.restart	= exynos4_restart,
 MACHINE_END
 
 MACHINE_START(SMDKC210, "SMDKC210")
@@ -385,6 +400,8 @@ MACHINE_START(SMDKC210, "SMDKC210")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkv310_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdkv310_machine_init,
 	.timer		= &exynos4_timer,
+	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index a2a177ff4b4..37ac93e8d6d 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -24,10 +24,10 @@
 #include <linux/i2c/atmel_mxt_ts.h>
 
 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
-#include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/iic.h>
@@ -47,6 +47,8 @@
 #include <media/s5p_fimc.h>
 #include <media/m5mols.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define UNIVERSAL_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -608,8 +610,7 @@ static void __init universal_tsp_init(void)
 
 	/* TSP_LDO_ON: XMDMADDR_11 */
 	gpio = EXYNOS4_GPE2(3);
-	gpio_request(gpio, "TSP_LDO_ON");
-	gpio_direction_output(gpio, 1);
+	gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON");
 	gpio_export(gpio, 0);
 
 	/* TSP_INT: XMDMADDR_7 */
@@ -669,8 +670,7 @@ static void __init universal_touchkey_init(void)
 	i2c_gpio12_devs[0].irq = gpio_to_irq(gpio);
 
 	gpio = EXYNOS4_GPE3(3);			/* XMDMDATA_3 */
-	gpio_request(gpio, "3_TOUCH_EN");
-	gpio_direction_output(gpio, 1);
+	gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "3_TOUCH_EN");
 }
 
 static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = {
@@ -992,7 +992,7 @@ static struct platform_device *universal_devices[] __initdata = {
 
 static void __init universal_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
 }
@@ -1000,9 +1000,7 @@ static void __init universal_map_io(void)
 void s5p_tv_setup(void)
 {
 	/* direct HPD to HDMI chip */
-	gpio_request(EXYNOS4_GPX3(7), "hpd-plug");
-
-	gpio_direction_input(EXYNOS4_GPX3(7));
+	gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
 	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
 	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
 
@@ -1058,7 +1056,9 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
 	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= universal_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= universal_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve        = &universal_reserve,
+	.restart	= exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c
index 97343df8f13..85b5527d091 100644
--- a/arch/arm/mach-exynos/mct.c
+++ b/arch/arm/mach-exynos/mct.c
@@ -44,8 +44,6 @@ struct mct_clock_event_device {
 	char name[10];
 };
 
-static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
-
 static void exynos4_mct_write(unsigned int value, void *addr)
 {
 	void __iomem *stat_addr;
@@ -264,6 +262,9 @@ static void exynos4_clockevent_init(void)
 }
 
 #ifdef CONFIG_LOCAL_TIMERS
+
+static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
+
 /* Clock event handling */
 static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt)
 {
@@ -428,9 +429,13 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt)
 
 void local_timer_stop(struct clock_event_device *evt)
 {
+	unsigned int cpu = smp_processor_id();
 	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
 	if (mct_int_type == MCT_INT_SPI)
-		disable_irq(evt->irq);
+		if (cpu == 0)
+			remove_irq(evt->irq, &mct_tick0_event_irq);
+		else
+			remove_irq(evt->irq, &mct_tick1_event_irq);
 	else
 		disable_percpu_irq(IRQ_MCT_LOCALTIMER);
 }
@@ -443,6 +448,7 @@ static void __init exynos4_timer_resources(void)
 
 	clk_rate = clk_get_rate(mct_clk);
 
+#ifdef CONFIG_LOCAL_TIMERS
 	if (mct_int_type == MCT_INT_PPI) {
 		int err;
 
@@ -452,6 +458,7 @@ static void __init exynos4_timer_resources(void)
 		WARN(err, "MCT: can't request IRQ %d (%d)\n",
 		     IRQ_MCT_LOCALTIMER, err);
 	}
+#endif /* CONFIG_LOCAL_TIMERS */
 }
 
 static void __init exynos4_timer_init(void)
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 69ffb2fb387..683aec786b7 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -24,7 +24,6 @@
 #include <asm/cacheflush.h>
 #include <asm/hardware/gic.h>
 #include <asm/smp_scu.h>
-#include <asm/unified.h>
 
 #include <mach/hardware.h>
 #include <mach/regs-clock.h>
@@ -32,7 +31,6 @@
 
 #include <plat/cpu.h>
 
-extern unsigned int gic_bank_offset;
 extern void exynos4_secondary_startup(void);
 
 #define CPU1_BOOT_REG		(samsung_rev() == EXYNOS4210_REV_1_1 ? \
@@ -65,31 +63,6 @@ static void __iomem *scu_base_addr(void)
 
 static DEFINE_SPINLOCK(boot_lock);
 
-static void __cpuinit exynos4_gic_secondary_init(void)
-{
-	void __iomem *dist_base = S5P_VA_GIC_DIST +
-				(gic_bank_offset * smp_processor_id());
-	void __iomem *cpu_base = S5P_VA_GIC_CPU +
-				(gic_bank_offset * smp_processor_id());
-	int i;
-
-	/*
-	 * Deal with the banked PPI and SGI interrupts - disable all
-	 * PPI interrupts, ensure all SGI interrupts are enabled.
-	 */
-	__raw_writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
-	__raw_writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
-
-	/*
-	 * Set priority on PPI and SGI interrupts
-	 */
-	for (i = 0; i < 32; i += 4)
-		__raw_writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
-
-	__raw_writel(0xf0, cpu_base + GIC_CPU_PRIMASK);
-	__raw_writel(1, cpu_base + GIC_CPU_CTRL);
-}
-
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
 	/*
@@ -97,7 +70,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
 	 */
-	exynos4_gic_secondary_init();
+	gic_secondary_init(0);
 
 	/*
 	 * let the primary processor know we're out of the
@@ -163,7 +136,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	while (time_before(jiffies, timeout)) {
 		smp_rmb();
 
-		__raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)),
+		__raw_writel(virt_to_phys(exynos4_secondary_startup),
 			CPU1_BOOT_REG);
 		gic_raise_softirq(cpumask_of(cpu), 1);
 
@@ -218,6 +191,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 	 * until it receives a soft interrupt, and then the
 	 * secondary CPU branches to this address.
 	 */
-	__raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)),
+	__raw_writel(virt_to_phys(exynos4_secondary_startup),
 			CPU1_BOOT_REG);
 }
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 509a435afd4..a4f61a43c7b 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -23,6 +23,7 @@
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
+#include <asm/smp_scu.h>
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
@@ -205,7 +206,7 @@ static void exynos4_pm_prepare(void)
 
 }
 
-static int exynos4_pm_add(struct sys_device *sysdev)
+static int exynos4_pm_add(struct device *dev)
 {
 	pm_cpu_prep = exynos4_pm_prepare;
 	pm_cpu_sleep = exynos4_cpu_suspend;
@@ -213,27 +214,6 @@ static int exynos4_pm_add(struct sys_device *sysdev)
 	return 0;
 }
 
-/* This function copy from linux/arch/arm/kernel/smp_scu.c */
-
-void exynos4_scu_enable(void __iomem *scu_base)
-{
-	u32 scu_ctrl;
-
-	scu_ctrl = __raw_readl(scu_base);
-	/* already enabled? */
-	if (scu_ctrl & 1)
-		return;
-
-	scu_ctrl |= 1;
-	__raw_writel(scu_ctrl, scu_base);
-
-	/*
-	 * Ensure that the data accessed by CPU0 before the SCU was
-	 * initialised is visible to the other CPUs.
-	 */
-	flush_cache_all();
-}
-
 static unsigned long pll_base_rate;
 
 static void exynos4_restore_pll(void)
@@ -301,8 +281,10 @@ static void exynos4_restore_pll(void)
 	} while (epll_wait || vpll_wait);
 }
 
-static struct sysdev_driver exynos4_pm_driver = {
-	.add		= exynos4_pm_add,
+static struct subsys_interface exynos4_pm_interface = {
+	.name		= "exynos4_pm",
+	.subsys		= &exynos4_subsys,
+	.add_dev	= exynos4_pm_add,
 };
 
 static __init int exynos4_pm_drvinit(void)
@@ -325,7 +307,7 @@ static __init int exynos4_pm_drvinit(void)
 		clk_put(pll_base);
 	}
 
-	return sysdev_driver_register(&exynos4_sysclass, &exynos4_pm_driver);
+	return subsys_interface_register(&exynos4_pm_interface);
 }
 arch_initcall(exynos4_pm_drvinit);
 
@@ -402,7 +384,7 @@ static void exynos4_pm_resume(void)
 
 	exynos4_restore_pll();
 
-	exynos4_scu_enable(S5P_VA_SCU);
+	scu_enable(S5P_VA_SCU);
 
 #ifdef CONFIG_CACHE_L2X0
 	s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save));
diff --git a/arch/arm/mach-exynos/setup-sdhci.c b/arch/arm/mach-exynos/setup-sdhci.c
deleted file mode 100644
index 92937b41090..00000000000
--- a/arch/arm/mach-exynos/setup-sdhci.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/arch/arm/mach-exynos4/setup-sdhci.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/types.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *exynos4_hsmmc_clksrcs[4] = {
-	[0] = NULL,
-	[1] = NULL,
-	[2] = "sclk_mmc",	/* mmc_bus */
-	[3] = NULL,
-};
diff --git a/arch/arm/mach-exynos/setup-spi.c b/arch/arm/mach-exynos/setup-spi.c
new file mode 100644
index 00000000000..833ff40ee0e
--- /dev/null
+++ b/arch/arm/mach-exynos/setup-spi.c
@@ -0,0 +1,72 @@
+/* linux/arch/arm/mach-exynos4/setup-spi.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ *             http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+	.fifo_lvl_mask	= 0x1ff,
+	.rx_lvl_offset	= 15,
+	.high_speed	= 1,
+	.clk_from_cmu	= true,
+	.tx_st_done	= 25,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(EXYNOS4_GPB(0), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(EXYNOS4_GPB(0), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgall_range(EXYNOS4_GPB(2), 2,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 15,
+	.high_speed	= 1,
+	.clk_from_cmu	= true,
+	.tx_st_done	= 25,
+};
+
+int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(EXYNOS4_GPB(4), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(EXYNOS4_GPB(4), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgall_range(EXYNOS4_GPB(6), 2,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C64XX_DEV_SPI2
+struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = {
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 15,
+	.high_speed	= 1,
+	.clk_from_cmu	= true,
+	.tx_st_done	= 25,
+};
+
+int s3c64xx_spi2_cfg_gpio(struct platform_device *dev)
+{
+	s3c_gpio_cfgpin(EXYNOS4_GPC1(1), S3C_GPIO_SFN(5));
+	s3c_gpio_setpull(EXYNOS4_GPC1(1), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgall_range(EXYNOS4_GPC1(3), 2,
+			      S3C_GPIO_SFN(5), S3C_GPIO_PULL_UP);
+	return 0;
+}
+#endif
diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c
index 39aca045f66..41743d21e8c 100644
--- a/arch/arm/mach-exynos/setup-usb-phy.c
+++ b/arch/arm/mach-exynos/setup-usb-phy.c
@@ -19,6 +19,13 @@
 #include <plat/cpu.h>
 #include <plat/usb-phy.h>
 
+static atomic_t host_usage;
+
+static int exynos4_usb_host_phy_is_on(void)
+{
+	return (readl(EXYNOS4_PHYPWR) & PHY1_STD_ANALOG_POWERDOWN) ? 0 : 1;
+}
+
 static int exynos4_usb_phy1_init(struct platform_device *pdev)
 {
 	struct clk *otg_clk;
@@ -27,6 +34,8 @@ static int exynos4_usb_phy1_init(struct platform_device *pdev)
 	u32 rstcon;
 	int err;
 
+	atomic_inc(&host_usage);
+
 	otg_clk = clk_get(&pdev->dev, "otg");
 	if (IS_ERR(otg_clk)) {
 		dev_err(&pdev->dev, "Failed to get otg clock\n");
@@ -39,6 +48,9 @@ static int exynos4_usb_phy1_init(struct platform_device *pdev)
 		return err;
 	}
 
+	if (exynos4_usb_host_phy_is_on())
+		return 0;
+
 	writel(readl(S5P_USBHOST_PHY_CONTROL) | S5P_USBHOST_PHY_ENABLE,
 			S5P_USBHOST_PHY_CONTROL);
 
@@ -95,6 +107,9 @@ static int exynos4_usb_phy1_exit(struct platform_device *pdev)
 	struct clk *otg_clk;
 	int err;
 
+	if (atomic_dec_return(&host_usage) > 0)
+		return 0;
+
 	otg_clk = clk_get(&pdev->dev, "otg");
 	if (IS_ERR(otg_clk)) {
 		dev_err(&pdev->dev, "Failed to get otg clock\n");