ARM: kill Hynix h720x platform

The platform was merged about 10 years ago, and has seen few updates
for most of the time since. The people that merged the code seem
no longer interested in it either, so let's remove it now.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Robert Schwebel <r.schwebel@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 0 insertions, 81 deletions

diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
deleted file mode 100644
index f68e967a206..00000000000
--- a/arch/arm/mach-h720x/h7202-eval.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * linux/arch/arm/mach-h720x/h7202-eval.c
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *               2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *		 2004 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * Architecture specific stuff for Hynix HMS30C7202 development board
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <asm/setup.h>
-#include <asm/types.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <asm/mach/arch.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include "common.h"
-
-static struct resource cirrus_resources[] = {
-	[0] = {
-		.start	= ETH0_PHYS + 0x300,
-		.end	= ETH0_PHYS + 0x300 + 0x10,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_CHAINED_GPIOB(8),
-		.end	= IRQ_CHAINED_GPIOB(8),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cirrus_device = {
-	.name		= "cirrus-cs89x0",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(cirrus_resources),
-	.resource	= cirrus_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
-	&cirrus_device,
-};
-
-/*
- * Hardware init. This is called early in initcalls
- * Place pin inits here. So you avoid adding ugly
- * #ifdef stuff to common drivers.
- * Use this only, if your bootloader is not able
- * to initialize the pins proper.
- */
-static void __init init_eval_h7202(void)
-{
-	init_hw_h7202();
-	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	/* Enable interrupt on portb bit 8 (ethernet) */
-	CPU_REG (GPIO_B_VIRT, GPIO_POL) &= ~(1 << 8);
-	CPU_REG (GPIO_B_VIRT, GPIO_EN) |= (1 << 8);
-}
-
-MACHINE_START(H7202, "Hynix HMS30C7202")
-	/* Maintainer: Robert Schwebel, Pengutronix */
-	.atag_offset	= 0x100,
-	.map_io		= h720x_map_io,
-	.init_irq	= h7202_init_irq,
-	.init_time	= h7202_timer_init,
-	.init_machine	= init_eval_h7202,
-	.dma_zone_size	= SZ_256M,
-	.restart	= h720x_restart,
-MACHINE_END