Merge branch 'imx/for-2.6.36' of git://git.pengutronix.de/git/ukl/linux-2.6 into HEAD

There are some more conflicts than detected by git, namely support for
the newly added cpuimx machines needed to be converted to dynamic device
registration.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

Conflicts:
	arch/arm/mach-imx/Makefile
	arch/arm/mach-imx/devices.c
	arch/arm/mach-imx/devices.h
	arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
	arch/arm/mach-mx2/Kconfig
	arch/arm/mach-mx25/Makefile
	arch/arm/mach-mx25/devices.c
	arch/arm/plat-mxc/include/mach/mx25.h
	arch/arm/plat-mxc/include/mach/mxc_nand.h

1 files changed, 317 insertions, 0 deletions

diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
new file mode 100644
index 00000000000..2a135449e52
--- /dev/null
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -0,0 +1,317 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm038.c which is :
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/board-eukrea_cpuimx27.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx27.h>
+#include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
+#include "devices-imx27.h"
+#include "devices.h"
+
+static int eukrea_cpuimx27_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART4 */
+#if defined(MACH_EUKREA_CPUIMX27_USEUART4)
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+#endif
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C1 */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	/* SDHC2 */
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+#endif
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	/* Quad UART's IRQ */
+	GPIO_PORTB | 22 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTB | 27 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTB | 30 | GPIO_GPIO | GPIO_IN,
+#endif
+	/* OTG */
+	PC7_PF_USBOTG_DATA5,
+	PC8_PF_USBOTG_DATA6,
+	PC9_PF_USBOTG_DATA0,
+	PC10_PF_USBOTG_DATA2,
+	PC11_PF_USBOTG_DATA1,
+	PC12_PF_USBOTG_DATA4,
+	PC13_PF_USBOTG_DATA3,
+	PE0_PF_USBOTG_NXT,
+	PE1_PF_USBOTG_STP,
+	PE2_PF_USBOTG_DIR,
+	PE24_PF_USBOTG_CLK,
+	PE25_PF_USBOTG_DATA7,
+	/* USBH2 */
+	PA0_PF_USBH2_CLK,
+	PA1_PF_USBH2_DIR,
+	PA2_PF_USBH2_DATA7,
+	PA3_PF_USBH2_NXT,
+	PA4_PF_USBH2_STP,
+	PD19_AF_USBH2_DATA4,
+	PD20_AF_USBH2_DATA3,
+	PD21_AF_USBH2_DATA6,
+	PD22_AF_USBH2_DATA0,
+	PD23_AF_USBH2_DATA2,
+	PD24_AF_USBH2_DATA1,
+	PD26_AF_USBH2_DATA5,
+};
+
+static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
+	.width = 2,
+};
+
+static struct resource eukrea_cpuimx27_flash_resource = {
+	.start = 0xc0000000,
+	.end   = 0xc3ffffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &eukrea_cpuimx27_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &eukrea_cpuimx27_flash_resource,
+};
+
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static const struct mxc_nand_platform_data
+cpuimx27_nand_board_info __initconst = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&eukrea_cpuimx27_nor_mtd_device,
+	&mxc_fec_device,
+	&mxc_wdt,
+	&mxc_w1_master_device,
+};
+
+static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
+};
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
+		.irq = IRQ_GPIOB(23),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
+		.irq = IRQ_GPIOB(22),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
+		.irq = IRQ_GPIOB(27),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
+		.irq = IRQ_GPIOB(30),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+	}
+};
+
+static struct platform_device serial_device = {
+	.name = "serial8250",
+	.id = 0,
+	.dev = {
+		.platform_data = serial_platform_data,
+	},
+};
+#endif
+
+#if defined(CONFIG_USB_ULPI)
+static struct mxc_usbh_platform_data otg_pdata = {
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+#endif
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode       = FSL_USB2_PHY_ULPI,
+};
+
+static int otg_mode_host;
+
+static int __init eukrea_cpuimx27_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", eukrea_cpuimx27_otg_mode);
+
+static void __init eukrea_cpuimx27_init(void)
+{
+	mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
+		ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
+
+	imx27_add_imx_uart0(&uart_pdata);
+
+	imx27_add_mxc_nand(&cpuimx27_nand_board_info);
+
+	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
+				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
+
+	imx27_add_i2c_imx1(&cpuimx27_i2c1_data);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
+	/* SDHC2 can be used for Wifi */
+	mxc_register_device(&mxc_sdhc_device1, NULL);
+#endif
+#if defined(MACH_EUKREA_CPUIMX27_USEUART4)
+	/* in which case UART4 is also used for Bluetooth */
+	imx27_add_imx_uart3(&uart_pdata);
+#endif
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	platform_device_register(&serial_device);
+#endif
+
+#if defined(CONFIG_USB_ULPI)
+	if (otg_mode_host) {
+		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+		mxc_register_device(&mxc_otg_host, &otg_pdata);
+	}
+
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+	if (!otg_mode_host)
+		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+
+#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
+	eukrea_mbimx27_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx27_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer eukrea_cpuimx27_timer = {
+	.init = eukrea_cpuimx27_timer_init,
+};
+
+MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = MX27_PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = eukrea_cpuimx27_init,
+	.timer          = &eukrea_cpuimx27_timer,
+MACHINE_END