Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)
  MAINTAINERS: EB110ATX is not ebsa110
  MAINTAINERS: update Eric Miao's email address and status
  fb: add support of LCD display controller on pxa168/910 (base layer)
  [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN
  [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
  [ARM] 5544/1: Trust PrimeCell resource sizes
  [ARM] pxa/sharpsl_pm: cleanup of gpio-related code.
  [ARM] pxa/sharpsl_pm: drop set_irq_type calls
  [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
  [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
  [ARM] sa1100: remove unused collie_pm.c
  [ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
  [ARM] 5550/1: Add default configure file for w90p910 platform
  [ARM] 5549/1: Add clock api for w90p910 platform.
  [ARM] 5548/1: Add gpio api for w90p910 platform
  [ARM] 5551/1: Add multi-function pin api for w90p910 platform.
  [ARM] Make ARM_VIC_NR depend on ARM_VIC
  [ARM] 5546/1: ARM PL022 SSP/SPI driver v3
  ARM: OMAP4: SMP: Update defconfig for OMAP4430
  ARM: OMAP4: SMP: Enable SMP support for OMAP4430
  ...

32 files changed, 0 insertions, 3504 deletions

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
deleted file mode 100644
index cddd194ac6e..00000000000
--- a/arch/arm/mach-imx/Kconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-menu "IMX Implementations"
-	depends on ARCH_IMX
-
-config ARCH_MX1ADS
-	bool "mx1ads"
-	depends on ARCH_IMX
-	select ISA
-	help
-	  Say Y here if you are using the Motorola MX1ADS board
-
-endmenu
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
deleted file mode 100644
index b047c7e795a..00000000000
--- a/arch/arm/mach-imx/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y			+= irq.o time.o dma.o generic.o clock.o
-
-obj-$(CONFIG_CPU_FREQ_IMX)	+= cpufreq.o
-
-# Specific board support
-obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
-
-# Support for blinky lights
-led-y := leds.o
-
-obj-$(CONFIG_LEDS)	+=  $(led-y)
-led-$(CONFIG_ARCH_MX1ADS) += leds-mx1ads.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
deleted file mode 100644
index fd72ce5b808..00000000000
--- a/arch/arm/mach-imx/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-    zreladdr-$(CONFIG_ARCH_MX1ADS)	:= 0x08008000
-
diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c
deleted file mode 100644
index cf332aeb942..00000000000
--- a/arch/arm/mach-imx/clock.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- *  Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/math64.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-/*
- * Very simple approach: We can't disable clocks, so we do
- * not need refcounting
- */
-
-struct clk {
-	struct list_head node;
-	const char *name;
-	unsigned long (*get_rate)(void);
-};
-
-/*
- *  get the system pll clock in Hz
- *
- *                  mfi + mfn / (mfd +1)
- *  f = 2 * f_ref * --------------------
- *                        pd + 1
- */
-static unsigned long imx_decode_pll(unsigned int pll, u32 f_ref)
-{
-	unsigned long long ll;
-	unsigned long quot;
-
-	u32 mfi = (pll >> 10) & 0xf;
-	u32 mfn = pll & 0x3ff;
-	u32 mfd = (pll >> 16) & 0x3ff;
-	u32 pd =  (pll >> 26) & 0xf;
-
-	mfi = mfi <= 5 ? 5 : mfi;
-
-	ll = 2 * (unsigned long long)f_ref *
-		((mfi << 16) + (mfn << 16) / (mfd + 1));
-	quot = (pd + 1) * (1 << 16);
-	ll += quot / 2;
-	do_div(ll, quot);
-	return (unsigned long)ll;
-}
-
-static unsigned long imx_get_system_clk(void)
-{
-	u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512);
-
-	return imx_decode_pll(SPCTL0, f_ref);
-}
-
-static unsigned long imx_get_mcu_clk(void)
-{
-	return imx_decode_pll(MPCTL0, CLK32 * 512);
-}
-
-/*
- *  get peripheral clock 1 ( UART[12], Timer[12], PWM )
- */
-static unsigned long imx_get_perclk1(void)
-{
-	return imx_get_system_clk() / (((PCDR) & 0xf)+1);
-}
-
-/*
- *  get peripheral clock 2 ( LCD, SD, SPI[12] )
- */
-static unsigned long imx_get_perclk2(void)
-{
-	return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1);
-}
-
-/*
- *  get peripheral clock 3 ( SSI )
- */
-static unsigned long imx_get_perclk3(void)
-{
-	return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1);
-}
-
-/*
- *  get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA )
- */
-static unsigned long imx_get_hclk(void)
-{
-	return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1);
-}
-
-static struct clk clk_system_clk = {
-	.name = "system_clk",
-	.get_rate = imx_get_system_clk,
-};
-
-static struct clk clk_hclk = {
-	.name = "hclk",
-	.get_rate = imx_get_hclk,
-};
-
-static struct clk clk_mcu_clk = {
-	.name = "mcu_clk",
-	.get_rate = imx_get_mcu_clk,
-};
-
-static struct clk clk_perclk1 = {
-	.name = "perclk1",
-	.get_rate = imx_get_perclk1,
-};
-
-static struct clk clk_uart_clk = {
-	.name = "uart_clk",
-	.get_rate = imx_get_perclk1,
-};
-
-static struct clk clk_perclk2 = {
-	.name = "perclk2",
-	.get_rate = imx_get_perclk2,
-};
-
-static struct clk clk_perclk3 = {
-	.name = "perclk3",
-	.get_rate = imx_get_perclk3,
-};
-
-static struct clk *clks[] = {
-	&clk_perclk1,
-	&clk_perclk2,
-	&clk_perclk3,
-	&clk_system_clk,
-	&clk_hclk,
-	&clk_mcu_clk,
-	&clk_uart_clk,
-};
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *p, *clk = ERR_PTR(-ENOENT);
-
-	mutex_lock(&clocks_mutex);
-	list_for_each_entry(p, &clocks, node) {
-		if (!strcmp(p->name, id)) {
-			clk = p;
-			goto found;
-		}
-	}
-
-found:
-	mutex_unlock(&clocks_mutex);
-
-	return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->get_rate();
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int imx_clocks_init(void)
-{
-	int i;
-
-	mutex_lock(&clocks_mutex);
-	for (i = 0; i < ARRAY_SIZE(clks); i++)
-		list_add(&clks[i]->node, &clocks);
-	mutex_unlock(&clocks_mutex);
-
-	return 0;
-}
-
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
deleted file mode 100644
index 434b4ca0af6..00000000000
--- a/arch/arm/mach-imx/cpufreq.c
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- * cpu.c: clock scaling for the iMX
- *
- * Copyright (C) 2000 2001, The Delft University of Technology
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- * Copyright (C) 2006 Inky Lung <ilung@cwlinux.com>
- * Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com>
- *
- * Based on SA1100 version written by:
- * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version
- * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl):
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-/*#define DEBUG*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <asm/system.h>
-
-#include <mach/hardware.h>
-
-#include "generic.h"
-
-#ifndef __val2mfld
-#define __val2mfld(mask,val) (((mask)&~((mask)<<1))*(val)&(mask))
-#endif
-#ifndef __mfld2val
-#define __mfld2val(mask,val) (((val)&(mask))/((mask)&~((mask)<<1)))
-#endif
-
-#define CR_920T_CLOCK_MODE	0xC0000000
-#define CR_920T_FASTBUS_MODE	0x00000000
-#define CR_920T_ASYNC_MODE	0xC0000000
-
-static u32 mpctl0_at_boot;
-static u32 bclk_div_at_boot;
-
-static struct clk *system_clk, *mcu_clk;
-
-static void imx_set_async_mode(void)
-{
-	adjust_cr(CR_920T_CLOCK_MODE, CR_920T_ASYNC_MODE);
-}
-
-static void imx_set_fastbus_mode(void)
-{
-	adjust_cr(CR_920T_CLOCK_MODE, CR_920T_FASTBUS_MODE);
-}
-
-static void imx_set_mpctl0(u32 mpctl0)
-{
-	unsigned long flags;
-
-	if (mpctl0 == 0) {
-		local_irq_save(flags);
-		CSCR &= ~CSCR_MPEN;
-		local_irq_restore(flags);
-		return;
-	}
-
-	local_irq_save(flags);
-	MPCTL0 = mpctl0;
-	CSCR |= CSCR_MPEN;
-	local_irq_restore(flags);
-}
-
-/**
- * imx_compute_mpctl - compute new PLL parameters
- * @new_mpctl:	pointer to location assigned by new PLL control register value
- * @cur_mpctl:	current PLL control register parameters
- * @f_ref:	reference source frequency Hz
- * @freq:	required frequency in Hz
- * @relation:	is one of %CPUFREQ_RELATION_L (supremum)
- *		and %CPUFREQ_RELATION_H (infimum)
- */
-long imx_compute_mpctl(u32 *new_mpctl, u32 cur_mpctl, u32 f_ref, unsigned long freq, int relation)
-{
-        u32 mfi;
-        u32 mfn;
-        u32 mfd;
-        u32 pd;
-	unsigned long long ll;
-	long l;
-	long quot;
-
-	/* Fdppl=2*Fref*(MFI+MFN/(MFD+1))/(PD+1) */
-	/*  PD=<0,15>, MFD=<1,1023>, MFI=<5,15> MFN=<0,1022> */
-
-	if (cur_mpctl) {
-		mfd = ((cur_mpctl >> 16) & 0x3ff) + 1;
-		pd =  ((cur_mpctl >> 26) & 0xf) + 1;
-	} else {
-		pd=2; mfd=313;
-	}
-
-	/* pd=2; mfd=313; mfi=8; mfn=183; */
-	/* (MFI+MFN/(MFD)) = Fdppl / (2*Fref) * (PD); */
-
-	quot = (f_ref + (1 << 9)) >> 10;
-	l = (freq * pd + quot) / (2 * quot);
-	mfi = l >> 10;
-	mfn = ((l & ((1 << 10) - 1)) * mfd + (1 << 9)) >> 10;
-
-	mfd -= 1;
-	pd -= 1;
-
-	*new_mpctl = ((mfi & 0xf) << 10) | (mfn & 0x3ff) | ((mfd & 0x3ff) << 16)
-		| ((pd & 0xf) << 26);
-
-	ll = 2 * (unsigned long long)f_ref * ( (mfi<<16) + (mfn<<16) / (mfd+1) );
-	quot = (pd+1) * (1<<16);
-	ll += quot / 2;
-	do_div(ll, quot);
-	freq = ll;
-
-	pr_debug(KERN_DEBUG "imx: new PLL parameters pd=%d mfd=%d mfi=%d mfn=%d, freq=%ld\n",
-		pd, mfd, mfi, mfn, freq);
-
-	return freq;
-}
-
-
-static int imx_verify_speed(struct cpufreq_policy *policy)
-{
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
-
-	return 0;
-}
-
-static unsigned int imx_get_speed(unsigned int cpu)
-{
-	unsigned int freq;
-	unsigned int cr;
-	unsigned int cscr;
-	unsigned int bclk_div;
-
-	if (cpu)
-		return 0;
-
-	cscr = CSCR;
-	bclk_div = __mfld2val(CSCR_BCLK_DIV, cscr) + 1;
-	cr = get_cr();
-
-	if((cr & CR_920T_CLOCK_MODE) == CR_920T_FASTBUS_MODE) {
-		freq = clk_get_rate(system_clk);
-		freq = (freq + bclk_div/2) / bclk_div;
-	} else {
-		freq = clk_get_rate(mcu_clk);
-		if (cscr & CSCR_MPU_PRESC)
-			freq /= 2;
-	}
-
-	freq = (freq + 500) / 1000;
-
-	return freq;
-}
-
-static int imx_set_target(struct cpufreq_policy *policy,
-			  unsigned int target_freq,
-			  unsigned int relation)
-{
-	struct cpufreq_freqs freqs;
-	u32 mpctl0 = 0;
-	u32 cscr;
-	unsigned long flags;
-	long freq;
-	long sysclk;
-	unsigned int bclk_div = bclk_div_at_boot;
-
-	/*
-	 * Some governors do not respects CPU and policy lower limits
-	 * which leads to bad things (division by zero etc), ensure
-	 * that such things do not happen.
-	 */
-	if(target_freq < policy->cpuinfo.min_freq)
-		target_freq = policy->cpuinfo.min_freq;
-
-	if(target_freq < policy->min)
-		target_freq = policy->min;
-
-	freq = target_freq * 1000;
-
-	pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n",
-			freq, mpctl0_at_boot);
-
-	sysclk = clk_get_rate(system_clk);
-
-	if (freq > sysclk / bclk_div_at_boot + 1000000) {
-		freq = imx_compute_mpctl(&mpctl0, mpctl0_at_boot, CLK32 * 512, freq, relation);
-		if (freq < 0) {
-			printk(KERN_WARNING "imx: target frequency %ld Hz cannot be set\n", freq);
-			return -EINVAL;
-		}
-	} else {
-		if(freq + 1000 < sysclk) {
-			if (relation == CPUFREQ_RELATION_L)
-				bclk_div = (sysclk - 1000) / freq;
-			else
-				bclk_div = (sysclk + freq + 1000) / freq;
-
-			if(bclk_div > 16)
-				bclk_div = 16;
-			if(bclk_div < bclk_div_at_boot)
-				bclk_div = bclk_div_at_boot;
-		}
-		freq = (sysclk + bclk_div / 2) / bclk_div;
-	}
-
-	freqs.old = imx_get_speed(0);
-	freqs.new = (freq + 500) / 1000;
-	freqs.cpu = 0;
-	freqs.flags = 0;
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	local_irq_save(flags);
-
-	imx_set_fastbus_mode();
-
-	imx_set_mpctl0(mpctl0);
-
-	cscr = CSCR;
-	cscr &= ~CSCR_BCLK_DIV;
-	cscr |= __val2mfld(CSCR_BCLK_DIV, bclk_div - 1);
-	CSCR = cscr;
-
-	if(mpctl0) {
-		CSCR |= CSCR_MPLL_RESTART;
-
-		/* Wait until MPLL is stabilized */
-		while( CSCR & CSCR_MPLL_RESTART );
-
-		imx_set_async_mode();
-	}
-
-	local_irq_restore(flags);
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	pr_debug(KERN_INFO "imx: set frequency %ld Hz, running from %s\n",
-			freq, mpctl0? "MPLL": "SPLL");
-
-	return 0;
-}
-
-static int __init imx_cpufreq_driver_init(struct cpufreq_policy *policy)
-{
-	printk(KERN_INFO "i.MX cpu freq change driver v1.0\n");
-
-	if (policy->cpu != 0)
-		return -EINVAL;
-
-	policy->cur = policy->min = policy->max = imx_get_speed(0);
-	policy->cpuinfo.min_freq = 8000;
-	policy->cpuinfo.max_freq = 200000;
-	 /* Manual states, that PLL stabilizes in two CLK32 periods */
-	policy->cpuinfo.transition_latency = 4 * 1000000000LL / CLK32;
-	return 0;
-}
-
-static struct cpufreq_driver imx_driver = {
-	.flags		= CPUFREQ_STICKY,
-	.verify		= imx_verify_speed,
-	.target		= imx_set_target,
-	.get		= imx_get_speed,
-	.init		= imx_cpufreq_driver_init,
-	.name		= "imx",
-};
-
-static int __init imx_cpufreq_init(void)
-{
-	bclk_div_at_boot = __mfld2val(CSCR_BCLK_DIV, CSCR) + 1;
-	mpctl0_at_boot = 0;
-
-	system_clk = clk_get(NULL, "system_clk");
-	if (IS_ERR(system_clk))
-		return PTR_ERR(system_clk);
-
-	mcu_clk = clk_get(NULL, "mcu_clk");
-	if (IS_ERR(mcu_clk)) {
-		clk_put(system_clk);
-		return PTR_ERR(mcu_clk);
-	}
-
-	if((CSCR & CSCR_MPEN) &&
-	   ((get_cr() & CR_920T_CLOCK_MODE) != CR_920T_FASTBUS_MODE))
-		mpctl0_at_boot = MPCTL0;
-
-	return cpufreq_register_driver(&imx_driver);
-}
-
-arch_initcall(imx_cpufreq_init);
-
diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c
deleted file mode 100644
index 1536583eece..00000000000
--- a/arch/arm/mach-imx/dma.c
+++ /dev/null
@@ -1,597 +0,0 @@
-/*
- *  linux/arch/arm/mach-imx/dma.c
- *
- *  imx DMA registration and IRQ dispatching
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- *  2004-03-03 Sascha Hauer <sascha@saschahauer.de>
- *             initial version heavily inspired by
- *             linux/arch/arm/mach-pxa/dma.c
- *
- *  2005-04-17 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- *             Changed to support scatter gather DMA
- *             by taking Russell's code from RiscPC
- *
- *  2006-05-31 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- *             Corrected error handling code.
- *
- */
-
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-
-#include <asm/scatterlist.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <mach/imx-dma.h>
-
-struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
-
-/*
- * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation
- * @dma_ch: i.MX DMA channel number
- * @lastcount: number of bytes transferred during last transfer
- *
- * Functions prepares DMA controller for next sg data chunk transfer.
- * The @lastcount argument informs function about number of bytes transferred
- * during last block. Zero value can be used for @lastcount to setup DMA
- * for the first chunk.
- */
-static inline int imx_dma_sg_next(imx_dmach_t dma_ch, unsigned int lastcount)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-	unsigned int nextcount;
-	unsigned int nextaddr;
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __func__, dma_ch);
-		return 0;
-	}
-
-	imxdma->resbytes -= lastcount;
-
-	if (!imxdma->sg) {
-		pr_debug("imxdma%d: no sg data\n", dma_ch);
-		return 0;
-	}
-
-	imxdma->sgbc += lastcount;
-	if ((imxdma->sgbc >= imxdma->sg->length) || !imxdma->resbytes) {
-		if ((imxdma->sgcount <= 1) || !imxdma->resbytes) {
-			pr_debug("imxdma%d: sg transfer limit reached\n",
-				 dma_ch);
-			imxdma->sgcount=0;
-			imxdma->sg = NULL;
-			return 0;
-		} else {
-			imxdma->sgcount--;
-			imxdma->sg++;
-			imxdma->sgbc = 0;
-		}
-	}
-	nextcount = imxdma->sg->length - imxdma->sgbc;
-	nextaddr = imxdma->sg->dma_address + imxdma->sgbc;
-
-	if(imxdma->resbytes < nextcount)
-		nextcount = imxdma->resbytes;
-
-	if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
-		DAR(dma_ch) = nextaddr;
-	else
-		SAR(dma_ch) = nextaddr;
-
-	CNTR(dma_ch) = nextcount;
-	pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, size 0x%08x\n",
-		 dma_ch, DAR(dma_ch), SAR(dma_ch), CNTR(dma_ch));
-
-	return nextcount;
-}
-
-/*
- * imx_dma_setup_sg_base - scatter-gather DMA emulation
- * @dma_ch: i.MX DMA channel number
- * @sg: pointer to the scatter-gather list/vector
- * @sgcount: scatter-gather list hungs count
- *
- * Functions sets up i.MX DMA state for emulated scatter-gather transfer
- * and sets up channel registers to be ready for the first chunk
- */
-static int
-imx_dma_setup_sg_base(imx_dmach_t dma_ch,
-		      struct scatterlist *sg, unsigned int sgcount)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
-	imxdma->sg = sg;
-	imxdma->sgcount = sgcount;
-	imxdma->sgbc = 0;
-	return imx_dma_sg_next(dma_ch, 0);
-}
-
-/**
- * imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from device transfer
- * @dma_ch: i.MX DMA channel number
- * @dma_address: the DMA/physical memory address of the linear data block
- *		to transfer
- * @dma_length: length of the data block in bytes
- * @dev_addr: physical device port address
- * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
- *           or %DMA_MODE_WRITE from memory to the device
- *
- * The function setups DMA channel source and destination addresses for transfer
- * specified by provided parameters. The scatter-gather emulation is disabled,
- * because linear data block
- * form the physical address range is transferred.
- * Return value: if incorrect parameters are provided -%EINVAL.
- *		Zero indicates success.
- */
-int
-imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
-		     unsigned int dma_length, unsigned int dev_addr,
-		     unsigned int dmamode)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
-	imxdma->sg = NULL;
-	imxdma->sgcount = 0;
-	imxdma->dma_mode = dmamode;
-	imxdma->resbytes = dma_length;
-
-	if (!dma_address) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	if (!dma_length) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
-		pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for read\n",
-			dma_ch, (unsigned int)dma_address, dma_length,
-			dev_addr);
-		SAR(dma_ch) = dev_addr;
-		DAR(dma_ch) = (unsigned int)dma_address;
-	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
-		pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for write\n",
-			dma_ch, (unsigned int)dma_address, dma_length,
-			dev_addr);
-		SAR(dma_ch) = (unsigned int)dma_address;
-		DAR(dma_ch) = dev_addr;
-	} else {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	CNTR(dma_ch) = dma_length;
-
-	return 0;
-}
-
-/**
- * imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer
- * @dma_ch: i.MX DMA channel number
- * @sg: pointer to the scatter-gather list/vector
- * @sgcount: scatter-gather list hungs count
- * @dma_length: total length of the transfer request in bytes
- * @dev_addr: physical device port address
- * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
- *           or %DMA_MODE_WRITE from memory to the device
- *
- * The function sets up DMA channel state and registers to be ready for transfer
- * specified by provided parameters. The scatter-gather emulation is set up
- * according to the parameters.
- *
- * The full preparation of the transfer requires setup of more register
- * by the caller before imx_dma_enable() can be called.
- *
- * %BLR(dma_ch) holds transfer burst length in bytes, 0 means 64 bytes
- *
- * %RSSR(dma_ch) has to be set to the DMA request line source %DMA_REQ_xxx
- *
- * %CCR(dma_ch) has to specify transfer parameters, the next settings is typical
- * for linear or simple scatter-gather transfers if %DMA_MODE_READ is specified
- *
- * %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x
- *
- * The typical setup for %DMA_MODE_WRITE is specified by next options combination
- *
- * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x
- *
- * Be careful here and do not mistakenly mix source and target device
- * port sizes constants, they are really different:
- * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32,
- * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32
- *
- * Return value: if incorrect parameters are provided -%EINVAL.
- * Zero indicates success.
- */
-int
-imx_dma_setup_sg(imx_dmach_t dma_ch,
-		 struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
-		 unsigned int dev_addr, unsigned int dmamode)
-{
-	int res;
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
-	imxdma->sg = NULL;
-	imxdma->sgcount = 0;
-	imxdma->dma_mode = dmamode;
-	imxdma->resbytes = dma_length;
-
-	if (!sg || !sgcount) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	if (!sg->length) {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
-		pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for read\n",
-			dma_ch, sg, sgcount, dma_length, dev_addr);
-		SAR(dma_ch) = dev_addr;
-	} else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
-		pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for write\n",
-			dma_ch, sg, sgcount, dma_length, dev_addr);
-		DAR(dma_ch) = dev_addr;
-	} else {
-		printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n",
-		       dma_ch);
-		return -EINVAL;
-	}
-
-	res = imx_dma_setup_sg_base(dma_ch, sg, sgcount);
-	if (res <= 0) {
-		printk(KERN_ERR "imxdma%d: no sg chunk ready\n", dma_ch);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/**
- * imx_dma_setup_handlers - setup i.MX DMA channel end and error notification handlers
- * @dma_ch: i.MX DMA channel number
- * @irq_handler: the pointer to the function called if the transfer
- *		ends successfully
- * @err_handler: the pointer to the function called if the premature
- *		end caused by error occurs
- * @data: user specified value to be passed to the handlers
- */
-int
-imx_dma_setup_handlers(imx_dmach_t dma_ch,
-		       void (*irq_handler) (int, void *),
-		       void (*err_handler) (int, void *, int),
-		       void *data)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-	unsigned long flags;
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __func__, dma_ch);
-		return -ENODEV;
-	}
-
-	local_irq_save(flags);
-	DISR = (1 << dma_ch);
-	imxdma->irq_handler = irq_handler;
-	imxdma->err_handler = err_handler;
-	imxdma->data = data;
-	local_irq_restore(flags);
-	return 0;
-}
-
-/**
- * imx_dma_enable - function to start i.MX DMA channel operation
- * @dma_ch: i.MX DMA channel number
- *
- * The channel has to be allocated by driver through imx_dma_request()
- * or imx_dma_request_by_prio() function.
- * The transfer parameters has to be set to the channel registers through
- * call of the imx_dma_setup_single() or imx_dma_setup_sg() function
- * and registers %BLR(dma_ch), %RSSR(dma_ch) and %CCR(dma_ch) has to
- * be set prior this function call by the channel user.
- */
-void imx_dma_enable(imx_dmach_t dma_ch)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-	unsigned long flags;
-
-	pr_debug("imxdma%d: imx_dma_enable\n", dma_ch);
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __func__, dma_ch);
-		return;
-	}
-
-	local_irq_save(flags);
-	DISR = (1 << dma_ch);
-	DIMR &= ~(1 << dma_ch);
-	CCR(dma_ch) |= CCR_CEN;
-	local_irq_restore(flags);
-}
-
-/**
- * imx_dma_disable - stop, finish i.MX DMA channel operatin
- * @dma_ch: i.MX DMA channel number
- */
-void imx_dma_disable(imx_dmach_t dma_ch)
-{
-	unsigned long flags;
-
-	pr_debug("imxdma%d: imx_dma_disable\n", dma_ch);
-
-	local_irq_save(flags);
-	DIMR |= (1 << dma_ch);
-	CCR(dma_ch) &= ~CCR_CEN;
-	DISR = (1 << dma_ch);
-	local_irq_restore(flags);
-}
-
-/**
- * imx_dma_request - request/allocate specified channel number
- * @dma_ch: i.MX DMA channel number
- * @name: the driver/caller own non-%NULL identification
- */
-int imx_dma_request(imx_dmach_t dma_ch, const char *name)
-{
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-	unsigned long flags;
-
-	/* basic sanity checks */
-	if (!name)
-		return -EINVAL;
-
-	if (dma_ch >= IMX_DMA_CHANNELS) {
-		printk(KERN_CRIT "%s: called for  non-existed channel %d\n",
-		       __func__, dma_ch);
-		return -EINVAL;
-	}
-
-	local_irq_save(flags);
-	if (imxdma->name) {
-		local_irq_restore(flags);
-		return -ENODEV;
-	}
-
-	imxdma->name = name;
-	imxdma->irq_handler = NULL;
-	imxdma->err_handler = NULL;
-	imxdma->data = NULL;
-	imxdma->sg = NULL;
-	local_irq_restore(flags);
-	return 0;
-}
-
-/**
- * imx_dma_free - release previously acquired channel
- * @dma_ch: i.MX DMA channel number
- */
-void imx_dma_free(imx_dmach_t dma_ch)
-{
-	unsigned long flags;
-	struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
-	if (!imxdma->name) {
-		printk(KERN_CRIT
-		       "%s: trying to free channel %d which is already freed\n",
-		       __func__, dma_ch);
-		return;
-	}
-
-	local_irq_save(flags);
-	/* Disable interrupts */
-	DIMR |= (1 << dma_ch);
-	CCR(dma_ch) &= ~CCR_CEN;
-	imxdma->name = NULL;
-	local_irq_restore(flags);
-}
-
-/**
- * imx_dma_request_by_prio - find and request some of free channels best suiting requested priority
- * @name: the driver/caller own non-%NULL identification
- * @prio: one of the hardware distinguished priority level:
- *        %DMA_PRIO_HIGH, %DMA_PRIO_MEDIUM, %DMA_PRIO_LOW
- *
- * This function tries to find free channel in the specified priority group
- * if the priority cannot be achieved it tries to look for free channel
- * in the higher and then even lower priority groups.
- *
- * Return value: If there is no free channel to allocate, -%ENODEV is returned.
- *               On successful allocation channel is returned.
- */
-imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio)
-{
-	int i;
-	int best;
-
-	switch (prio) {
-	case (DMA_PRIO_HIGH):
-		best = 8;
-		break;
-	case (DMA_PRIO_MEDIUM):
-		best = 4;
-		break;
-	case (DMA_PRIO_LOW):
-	default:
-		best = 0;
-		break;
-	}
-
-	for (i = best; i < IMX_DMA_CHANNELS; i++) {
-		if (!imx_dma_request(i, name)) {
-			return i;
-		}
-	}
-
-	for (i = best - 1; i >= 0; i--) {
-		if (!imx_dma_request(i, name)) {
-			return i;
-		}
-	}
-
-	printk(KERN_ERR "%s: no free DMA channel found\n", __func__);
-
-	return -ENODEV;
-}
-
-static irqreturn_t dma_err_handler(int irq, void *dev_id)
-{
-	int i, disr = DISR;
-	struct imx_dma_channel *channel;
-	unsigned int err_mask = DBTOSR | DRTOSR | DSESR | DBOSR;
-	int errcode;
-
-	DISR = disr & err_mask;
-	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
-		if(!(err_mask & (1 << i)))
-			continue;
-		channel = &imx_dma_channels[i];
-		errcode = 0;
-
-		if (DBTOSR & (1 << i)) {
-			DBTOSR = (1 << i);
-			errcode |= IMX_DMA_ERR_BURST;
-		}
-		if (DRTOSR & (1 << i)) {
-			DRTOSR = (1 << i);
-			errcode |= IMX_DMA_ERR_REQUEST;
-		}
-		if (DSESR & (1 << i)) {
-			DSESR = (1 << i);
-			errcode |= IMX_DMA_ERR_TRANSFER;
-		}
-		if (DBOSR & (1 << i)) {
-			DBOSR = (1 << i);
-			errcode |= IMX_DMA_ERR_BUFFER;
-		}
-
-		/*
-		 * The cleaning of @sg field would be questionable
-		 * there, because its value can help to compute
-		 * remaining/transferred bytes count in the handler
-		 */
-		/*imx_dma_channels[i].sg = NULL;*/
-
-		if (channel->name && channel->err_handler) {
-			channel->err_handler(i, channel->data, errcode);
-			continue;
-		}
-
-		imx_dma_channels[i].sg = NULL;
-
-		printk(KERN_WARNING
-		       "DMA timeout on channel %d (%s) -%s%s%s%s\n",
-		       i, channel->name,
-		       errcode&IMX_DMA_ERR_BURST?    " burst":"",
-		       errcode&IMX_DMA_ERR_REQUEST?  " request":"",
-		       errcode&IMX_DMA_ERR_TRANSFER? " transfer":"",
-		       errcode&IMX_DMA_ERR_BUFFER?   " buffer":"");
-	}
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
-	int i, disr = DISR;
-
-	pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n",
-		     disr);
-
-	DISR = disr;
-	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
-		if (disr & (1 << i)) {
-			struct imx_dma_channel *channel = &imx_dma_channels[i];
-			if (channel->name) {
-				if (imx_dma_sg_next(i, CNTR(i))) {
-					CCR(i) &= ~CCR_CEN;
-					mb();
-					CCR(i) |= CCR_CEN;
-				} else {
-					if (channel->irq_handler)
-						channel->irq_handler(i,
-							channel->data);
-				}
-			} else {
-				/*
-				 * IRQ for an unregistered DMA channel:
-				 * let's clear the interrupts and disable it.
-				 */
-				printk(KERN_WARNING
-				       "spurious IRQ for DMA channel %d\n", i);
-			}
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-static int __init imx_dma_init(void)
-{
-	int ret;
-	int i;
-
-	/* reset DMA module */
-	DCR = DCR_DRST;
-
-	ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
-	if (ret) {
-		printk(KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
-		return ret;
-	}
-
-	ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL);
-	if (ret) {
-		printk(KERN_CRIT "Wow!  Can't register ERRIRQ for DMA\n");
-		free_irq(DMA_INT, NULL);
-	}
-
-	/* enable DMA module */
-	DCR = DCR_DEN;
-
-	/* clear all interrupts */
-	DISR = (1 << IMX_DMA_CHANNELS) - 1;
-
-	/* enable interrupts */
-	DIMR = (1 << IMX_DMA_CHANNELS) - 1;
-
-	for (i = 0; i < IMX_DMA_CHANNELS; i++) {
-		imx_dma_channels[i].sg = NULL;
-		imx_dma_channels[i].dma_num = i;
-	}
-
-	return ret;
-}
-
-arch_initcall(imx_dma_init);
-
-EXPORT_SYMBOL(imx_dma_setup_single);
-EXPORT_SYMBOL(imx_dma_setup_sg);
-EXPORT_SYMBOL(imx_dma_setup_handlers);
-EXPORT_SYMBOL(imx_dma_enable);
-EXPORT_SYMBOL(imx_dma_disable);
-EXPORT_SYMBOL(imx_dma_request);
-EXPORT_SYMBOL(imx_dma_free);
-EXPORT_SYMBOL(imx_dma_request_by_prio);
-EXPORT_SYMBOL(imx_dma_channels);
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
deleted file mode 100644
index 05f1739ee12..00000000000
--- a/arch/arm/mach-imx/generic.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- *  arch/arm/mach-imx/generic.c
- *
- *  author: Sascha Hauer
- *  Created: april 20th, 2004
- *  Copyright: Synertronixx GmbH
- *
- *  Common code for i.MX machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-
-#include <asm/errno.h>
-#include <mach/hardware.h>
-#include <mach/imx-regs.h>
-
-#include <asm/mach/map.h>
-#include <mach/mmc.h>
-#include <mach/gpio.h>
-
-unsigned long imx_gpio_alloc_map[(GPIO_PORT_MAX + 1) * 32 / BITS_PER_LONG];
-
-void imx_gpio_mode(int gpio_mode)
-{
-	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
-	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
-	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
-	unsigned int tmp;
-
-	/* Pullup enable */
-	if(gpio_mode & GPIO_PUEN)
-		PUEN(port) |= (1<<pin);
-	else
-		PUEN(port) &= ~(1<<pin);
-
-	/* Data direction */
-	if(gpio_mode & GPIO_OUT)
-		DDIR(port) |= 1<<pin;
-	else
-		DDIR(port) &= ~(1<<pin);
-
-	/* Primary / alternate function */
-	if(gpio_mode & GPIO_AF)
-		GPR(port) |= (1<<pin);
-	else
-		GPR(port) &= ~(1<<pin);
-
-	/* use as gpio? */
-	if(gpio_mode &  GPIO_GIUS)
-		GIUS(port) |= (1<<pin);
-	else
-		GIUS(port) &= ~(1<<pin);
-
-	/* Output / input configuration */
-	/* FIXME: I'm not very sure about OCR and ICONF, someone
-	 * should have a look over it
-	 */
-	if(pin<16) {
-		tmp = OCR1(port);
-		tmp &= ~( 3<<(pin*2));
-		tmp |= (ocr << (pin*2));
-		OCR1(port) = tmp;
-
-		ICONFA1(port) &= ~( 3<<(pin*2));
-		ICONFA1(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
-		ICONFB1(port) &= ~( 3<<(pin*2));
-		ICONFB1(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
-	} else {
-		tmp = OCR2(port);
-		tmp &= ~( 3<<((pin-16)*2));
-		tmp |= (ocr << ((pin-16)*2));
-		OCR2(port) = tmp;
-
-		ICONFA2(port) &= ~( 3<<((pin-16)*2));
-		ICONFA2(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << ((pin-16) * 2);
-		ICONFB2(port) &= ~( 3<<((pin-16)*2));
-		ICONFB2(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << ((pin-16) * 2);
-	}
-}
-
-EXPORT_SYMBOL(imx_gpio_mode);
-
-int imx_gpio_request(unsigned gpio, const char *label)
-{
-	if(gpio >= (GPIO_PORT_MAX + 1) * 32) {
-		printk(KERN_ERR "imx_gpio: Attempt to request nonexistent GPIO %d for \"%s\"\n",
-			gpio, label ? label : "?");
-		return -EINVAL;
-	}
-
-	if(test_and_set_bit(gpio, imx_gpio_alloc_map)) {
-		printk(KERN_ERR "imx_gpio: GPIO %d already used. Allocation for \"%s\" failed\n",
-			gpio, label ? label : "?");
-		return -EBUSY;
-	}
-
-	return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_request);
-
-void imx_gpio_free(unsigned gpio)
-{
-	if(gpio >= (GPIO_PORT_MAX + 1) * 32)
-		return;
-
-	clear_bit(gpio, imx_gpio_alloc_map);
-}
-
-EXPORT_SYMBOL(imx_gpio_free);
-
-int imx_gpio_direction_input(unsigned gpio)
-{
-	imx_gpio_mode(gpio | GPIO_IN | GPIO_GIUS | GPIO_DR);
-	return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_direction_input);
-
-int imx_gpio_direction_output(unsigned gpio, int value)
-{
-	imx_gpio_set_value(gpio, value);
-	imx_gpio_mode(gpio | GPIO_OUT | GPIO_GIUS | GPIO_DR);
-	return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_direction_output);
-
-int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-				int alloc_mode, const char *label)
-{
-	const int *p = pin_list;
-	int i;
-	unsigned gpio;
-	unsigned mode;
-
-	for (i = 0; i < count; i++) {
-		gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-		mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK);
-
-		if (gpio >= (GPIO_PORT_MAX + 1) * 32)
-			goto setup_error;
-
-		if (alloc_mode & IMX_GPIO_ALLOC_MODE_RELEASE)
-			imx_gpio_free(gpio);
-		else if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_NO_ALLOC))
-			if (imx_gpio_request(gpio, label))
-				if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_TRY_ALLOC))
-					goto setup_error;
-
-		if (!(alloc_mode & (IMX_GPIO_ALLOC_MODE_ALLOC_ONLY |
-				    IMX_GPIO_ALLOC_MODE_RELEASE)))
-			imx_gpio_mode(gpio | mode);
-
-		p++;
-	}
-	return 0;
-
-setup_error:
-	if(alloc_mode & (IMX_GPIO_ALLOC_MODE_NO_ALLOC |
-		         IMX_GPIO_ALLOC_MODE_TRY_ALLOC))
-		return -EINVAL;
-
-	while (p != pin_list) {
-		p--;
-		gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-		imx_gpio_free(gpio);
-	}
-
-	return -EINVAL;
-}
-
-EXPORT_SYMBOL(imx_gpio_setup_multiple_pins);
-
-void __imx_gpio_set_value(unsigned gpio, int value)
-{
-	imx_gpio_set_value_inline(gpio, value);
-}
-
-EXPORT_SYMBOL(__imx_gpio_set_value);
-
-int imx_gpio_to_irq(unsigned gpio)
-{
-	return IRQ_GPIOA(0) + gpio;
-}
-
-EXPORT_SYMBOL(imx_gpio_to_irq);
-
-int imx_irq_to_gpio(unsigned irq)
-{
-	if (irq < IRQ_GPIOA(0))
-		return -EINVAL;
-	return irq - IRQ_GPIOA(0);
-}
-
-EXPORT_SYMBOL(imx_irq_to_gpio);
-
-static struct resource imx_mmc_resources[] = {
-	[0] = {
-		.start	= 0x00214000,
-		.end	= 0x002140FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (SDHC_INT),
-		.end	= (SDHC_INT),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 imxmmmc_dmamask = 0xffffffffUL;
-
-static struct platform_device imx_mmc_device = {
-	.name		= "imx-mmc",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &imxmmmc_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(imx_mmc_resources),
-	.resource	= imx_mmc_resources,
-};
-
-void __init imx_set_mmc_info(struct imxmmc_platform_data *info)
-{
-	imx_mmc_device.dev.platform_data = info;
-}
-
-static struct platform_device *devices[] __initdata = {
-	&imx_mmc_device,
-};
-
-static struct map_desc imx_io_desc[] __initdata = {
-	{
-		.virtual	= IMX_IO_BASE,
-		.pfn		= __phys_to_pfn(IMX_IO_PHYS),
-		.length		= IMX_IO_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-void __init
-imx_map_io(void)
-{
-	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
-}
-
-static int __init imx_init(void)
-{
-	return platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-subsys_initcall(imx_init);
diff --git a/arch/arm/mach-imx/generic.h b/arch/arm/mach-imx/generic.h
deleted file mode 100644
index e91003e4bef..00000000000
--- a/arch/arm/mach-imx/generic.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *  linux/arch/arm/mach-imx/generic.h
- *
- * Author:	Sascha Hauer <sascha@saschahauer.de>
- * Copyright:	Synertronixx GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-extern void __init imx_map_io(void);
-extern void __init imx_init_irq(void);
-
-struct sys_timer;
-extern struct sys_timer imx_timer;
diff --git a/arch/arm/mach-imx/include/mach/debug-macro.S b/arch/arm/mach-imx/include/mach/debug-macro.S
deleted file mode 100644
index 87802bbfe63..00000000000
--- a/arch/arm/mach-imx/include/mach/debug-macro.S
+++ /dev/null
@@ -1,34 +0,0 @@
-/* arch/arm/mach-imx/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- *  Copyright (C) 1994-1999 Russell King
- *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-		.macro	addruart,rx
-		mrc	p15, 0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0x00000000	@ physical
-		movne	\rx, #0xe0000000	@ virtual
-		orreq	\rx, \rx, #0x00200000	@ physical
-		orr	\rx, \rx, #0x00006000	@ UART1 offset
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #0x40]	@ TXDATA
-		.endm
-
-		.macro	waituart,rd,rx
-		.endm
-
-		.macro	busyuart,rd,rx
-1002:		ldr	\rd, [\rx, #0x98]	@ SR2
-		tst	\rd, #1 << 3		@ TXDC
-		beq	1002b			@ wait until transmit done
-		.endm
diff --git a/arch/arm/mach-imx/include/mach/dma.h b/arch/arm/mach-imx/include/mach/dma.h
deleted file mode 100644
index 621ff2c730f..00000000000
--- a/arch/arm/mach-imx/include/mach/dma.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- *  linux/include/asm-arm/imxads/dma.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-typedef enum {
-	DMA_PRIO_HIGH = 0,
-	DMA_PRIO_MEDIUM = 1,
-	DMA_PRIO_LOW = 2
-} imx_dma_prio;
-
-#define DMA_REQ_UART3_T        2
-#define DMA_REQ_UART3_R        3
-#define DMA_REQ_SSI2_T         4
-#define DMA_REQ_SSI2_R         5
-#define DMA_REQ_CSI_STAT       6
-#define DMA_REQ_CSI_R          7
-#define DMA_REQ_MSHC           8
-#define DMA_REQ_DSPA_DCT_DOUT  9
-#define DMA_REQ_DSPA_DCT_DIN  10
-#define DMA_REQ_DSPA_MAC      11
-#define DMA_REQ_EXT           12
-#define DMA_REQ_SDHC          13
-#define DMA_REQ_SPI1_R        14
-#define DMA_REQ_SPI1_T        15
-#define DMA_REQ_SSI_T         16
-#define DMA_REQ_SSI_R         17
-#define DMA_REQ_ASP_DAC       18
-#define DMA_REQ_ASP_ADC       19
-#define DMA_REQ_USP_EP(x)    (20+(x))
-#define DMA_REQ_SPI2_R        26
-#define DMA_REQ_SPI2_T        27
-#define DMA_REQ_UART2_T       28
-#define DMA_REQ_UART2_R       29
-#define DMA_REQ_UART1_T       30
-#define DMA_REQ_UART1_R       31
-
-#endif				/* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-imx/include/mach/entry-macro.S b/arch/arm/mach-imx/include/mach/entry-macro.S
deleted file mode 100644
index e4db679f776..00000000000
--- a/arch/arm/mach-imx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for iMX-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-
-		.macro	disable_fiq
-		.endm
-
-		.macro	get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro	arch_ret_to_user, tmp1, tmp2
-		.endm
-
-#define AITC_NIVECSR   0x40
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =IO_ADDRESS(IMX_AITC_BASE)
-		@ Load offset & priority of the highest priority
-		@ interrupt pending.
-		ldr	\irqstat, [\base, #AITC_NIVECSR]
-		@ Shift off the priority leaving the offset or
-		@ "interrupt number", use arithmetic shift to
-		@ transform illegal source (0xffff) as -1
-		mov	\irqnr, \irqstat, asr #16
-		adds	\tmp, \irqnr, #1
-		.endm
diff --git a/arch/arm/mach-imx/include/mach/gpio.h b/arch/arm/mach-imx/include/mach/gpio.h
deleted file mode 100644
index 6c2942f8292..00000000000
--- a/arch/arm/mach-imx/include/mach/gpio.h
+++ /dev/null
@@ -1,106 +0,0 @@
-#ifndef _IMX_GPIO_H
-
-#include <linux/kernel.h>
-#include <mach/hardware.h>
-#include <mach/imx-regs.h>
-
-#define IMX_GPIO_ALLOC_MODE_NORMAL	0
-#define IMX_GPIO_ALLOC_MODE_NO_ALLOC	1
-#define IMX_GPIO_ALLOC_MODE_TRY_ALLOC	2
-#define IMX_GPIO_ALLOC_MODE_ALLOC_ONLY	4
-#define IMX_GPIO_ALLOC_MODE_RELEASE	8
-
-extern int imx_gpio_request(unsigned gpio, const char *label);
-
-extern void imx_gpio_free(unsigned gpio);
-
-extern int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-					int alloc_mode, const char *label);
-
-extern int imx_gpio_direction_input(unsigned gpio);
-
-extern int imx_gpio_direction_output(unsigned gpio, int value);
-
-extern void __imx_gpio_set_value(unsigned gpio, int value);
-
-static inline int imx_gpio_get_value(unsigned gpio)
-{
-	return SSR(gpio >> GPIO_PORT_SHIFT) & (1 << (gpio & GPIO_PIN_MASK));
-}
-
-static inline void imx_gpio_set_value_inline(unsigned gpio, int value)
-{
-	unsigned long flags;
-
-	raw_local_irq_save(flags);
-	if(value)
-		DR(gpio >> GPIO_PORT_SHIFT) |= (1 << (gpio & GPIO_PIN_MASK));
-	else
-		DR(gpio >> GPIO_PORT_SHIFT) &= ~(1 << (gpio & GPIO_PIN_MASK));
-	raw_local_irq_restore(flags);
-}
-
-static inline void imx_gpio_set_value(unsigned gpio, int value)
-{
-	if(__builtin_constant_p(gpio))
-		imx_gpio_set_value_inline(gpio, value);
-	else
-		__imx_gpio_set_value(gpio, value);
-}
-
-extern int imx_gpio_to_irq(unsigned gpio);
-
-extern int imx_irq_to_gpio(unsigned irq);
-
-/*-------------------------------------------------------------------------*/
-
-/* Wrappers for "new style" GPIO calls. These calls i.MX specific versions
- * to allow future extension of GPIO logic.
- */
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return imx_gpio_request(gpio, label);
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-	might_sleep();
-
-	imx_gpio_free(gpio);
-}
-
-static inline  int gpio_direction_input(unsigned gpio)
-{
-	return imx_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
-	return imx_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return imx_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	imx_gpio_set_value(gpio, value);
-}
-
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return imx_gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return imx_irq_to_gpio(irq);
-}
-
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/hardware.h b/arch/arm/mach-imx/include/mach/hardware.h
deleted file mode 100644
index c73e9e724c7..00000000000
--- a/arch/arm/mach-imx/include/mach/hardware.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *  arch/arm/mach-imx/include/mach/hardware.h
- *
- *  Copyright (C) 1999 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include "imx-regs.h"
-
-#ifndef __ASSEMBLY__
-# define __REG(x)	(*((volatile u32 *)IO_ADDRESS(x)))
-
-# define __REG2(x,y)        (*(volatile u32 *)((u32)&__REG(x) + (y)))
-#endif
-
-/*
- * Memory map
- */
-
-#define IMX_IO_PHYS		0x00200000
-#define IMX_IO_SIZE		0x00100000
-#define IMX_IO_BASE		0xe0000000
-
-#define IMX_CS0_PHYS		0x10000000
-#define IMX_CS0_SIZE		0x02000000
-#define IMX_CS0_VIRT		0xe8000000
-
-#define IMX_CS1_PHYS		0x12000000
-#define IMX_CS1_SIZE		0x01000000
-#define IMX_CS1_VIRT		0xea000000
-
-#define IMX_CS2_PHYS		0x13000000
-#define IMX_CS2_SIZE		0x01000000
-#define IMX_CS2_VIRT		0xeb000000
-
-#define IMX_CS3_PHYS		0x14000000
-#define IMX_CS3_SIZE		0x01000000
-#define IMX_CS3_VIRT		0xec000000
-
-#define IMX_CS4_PHYS		0x15000000
-#define IMX_CS4_SIZE		0x01000000
-#define IMX_CS4_VIRT		0xed000000
-
-#define IMX_CS5_PHYS		0x16000000
-#define IMX_CS5_SIZE		0x01000000
-#define IMX_CS5_VIRT		0xee000000
-
-#define IMX_FB_VIRT		0xF1000000
-#define IMX_FB_SIZE		(256*1024)
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) ((x) | IMX_IO_BASE)
-
-#ifndef __ASSEMBLY__
-/*
- * Handy routine to set GPIO functions
- */
-extern void imx_gpio_mode( int gpio_mode );
-
-#endif
-
-#define MAXIRQNUM                       62
-#define MAXFIQNUM                       62
-#define MAXSWINUM                       62
-
-/*
- * Use SDRAM for memory
- */
-#define MEM_SIZE		0x01000000
-
-#ifdef CONFIG_ARCH_MX1ADS
-#include "mx1ads.h"
-#endif
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/imx-dma.h b/arch/arm/mach-imx/include/mach/imx-dma.h
deleted file mode 100644
index bbe54df7f0d..00000000000
--- a/arch/arm/mach-imx/include/mach/imx-dma.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- *  linux/include/asm-arm/imxads/dma.h
- *
- *  Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <mach/dma.h>
-
-#ifndef __ASM_ARCH_IMX_DMA_H
-#define __ASM_ARCH_IMX_DMA_H
-
-#define IMX_DMA_CHANNELS  11
-
-/*
- * struct imx_dma_channel - i.MX specific DMA extension
- * @name: name specified by DMA client
- * @irq_handler: client callback for end of transfer
- * @err_handler: client callback for error condition
- * @data: clients context data for callbacks
- * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE
- * @sg: pointer to the actual read/written chunk for scatter-gather emulation
- * @sgbc: counter of processed bytes in the actual read/written chunk
- * @resbytes: total residual number of bytes to transfer
- *            (it can be lower or same as sum of SG mapped chunk sizes)
- * @sgcount: number of chunks to be read/written
- *
- * Structure is used for IMX DMA processing. It would be probably good
- * @struct dma_struct in the future for external interfacing and use
- * @struct imx_dma_channel only as extension to it.
- */
-
-struct imx_dma_channel {
-	const char *name;
-	void (*irq_handler) (int, void *);
-	void (*err_handler) (int, void *, int errcode);
-	void *data;
-	unsigned int  dma_mode;
-	struct scatterlist *sg;
-	unsigned int sgbc;
-	unsigned int sgcount;
-	unsigned int resbytes;
-	int dma_num;
-};
-
-extern struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
-
-#define IMX_DMA_ERR_BURST     1
-#define IMX_DMA_ERR_REQUEST   2
-#define IMX_DMA_ERR_TRANSFER  4
-#define IMX_DMA_ERR_BUFFER    8
-
-/* The type to distinguish channel numbers parameter from ordinal int type */
-typedef int imx_dmach_t;
-
-#define DMA_MODE_READ		0
-#define DMA_MODE_WRITE		1
-#define DMA_MODE_MASK		1
-
-int
-imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
-		unsigned int dma_length, unsigned int dev_addr, unsigned int dmamode);
-
-int
-imx_dma_setup_sg(imx_dmach_t dma_ch,
-		 struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
-		 unsigned int dev_addr, unsigned int dmamode);
-
-int
-imx_dma_setup_handlers(imx_dmach_t dma_ch,
-		void (*irq_handler) (int, void *),
-		void (*err_handler) (int, void *, int), void *data);
-
-void imx_dma_enable(imx_dmach_t dma_ch);
-
-void imx_dma_disable(imx_dmach_t dma_ch);
-
-int imx_dma_request(imx_dmach_t dma_ch, const char *name);
-
-void imx_dma_free(imx_dmach_t dma_ch);
-
-imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio);
-
-
-#endif	/* _ASM_ARCH_IMX_DMA_H */
diff --git a/arch/arm/mach-imx/include/mach/imx-regs.h b/arch/arm/mach-imx/include/mach/imx-regs.h
deleted file mode 100644
index 490297fc0e3..00000000000
--- a/arch/arm/mach-imx/include/mach/imx-regs.h
+++ /dev/null
@@ -1,376 +0,0 @@
-#ifndef _IMX_REGS_H
-#define _IMX_REGS_H
-/* ------------------------------------------------------------------------
- *  Motorola IMX system registers
- * ------------------------------------------------------------------------
- *
- */
-
-/*
- *  Register BASEs, based on OFFSETs
- *
- */
-#define IMX_AIPI1_BASE             (0x00000 + IMX_IO_BASE)
-#define IMX_WDT_BASE               (0x01000 + IMX_IO_BASE)
-#define IMX_TIM1_BASE              (0x02000 + IMX_IO_BASE)
-#define IMX_TIM2_BASE              (0x03000 + IMX_IO_BASE)
-#define IMX_RTC_BASE               (0x04000 + IMX_IO_BASE)
-#define IMX_LCDC_BASE              (0x05000 + IMX_IO_BASE)
-#define IMX_UART1_BASE             (0x06000 + IMX_IO_BASE)
-#define IMX_UART2_BASE             (0x07000 + IMX_IO_BASE)
-#define IMX_PWM_BASE               (0x08000 + IMX_IO_BASE)
-#define IMX_DMAC_BASE              (0x09000 + IMX_IO_BASE)
-#define IMX_AIPI2_BASE             (0x10000 + IMX_IO_BASE)
-#define IMX_SIM_BASE               (0x11000 + IMX_IO_BASE)
-#define IMX_USBD_BASE              (0x12000 + IMX_IO_BASE)
-#define IMX_SPI1_BASE              (0x13000 + IMX_IO_BASE)
-#define IMX_MMC_BASE               (0x14000 + IMX_IO_BASE)
-#define IMX_ASP_BASE               (0x15000 + IMX_IO_BASE)
-#define IMX_BTA_BASE               (0x16000 + IMX_IO_BASE)
-#define IMX_I2C_BASE               (0x17000 + IMX_IO_BASE)
-#define IMX_SSI_BASE               (0x18000 + IMX_IO_BASE)
-#define IMX_SPI2_BASE              (0x19000 + IMX_IO_BASE)
-#define IMX_MSHC_BASE              (0x1A000 + IMX_IO_BASE)
-#define IMX_PLL_BASE               (0x1B000 + IMX_IO_BASE)
-#define IMX_GPIO_BASE              (0x1C000 + IMX_IO_BASE)
-#define IMX_EIM_BASE               (0x20000 + IMX_IO_BASE)
-#define IMX_SDRAMC_BASE            (0x21000 + IMX_IO_BASE)
-#define IMX_MMA_BASE               (0x22000 + IMX_IO_BASE)
-#define IMX_AITC_BASE              (0x23000 + IMX_IO_BASE)
-#define IMX_CSI_BASE               (0x24000 + IMX_IO_BASE)
-
-/* PLL registers */
-#define CSCR   __REG(IMX_PLL_BASE)        /* Clock Source Control Register */
-#define CSCR_SPLL_RESTART	(1<<22)
-#define CSCR_MPLL_RESTART	(1<<21)
-#define CSCR_SYSTEM_SEL		(1<<16)
-#define CSCR_BCLK_DIV		(0xf<<10)
-#define CSCR_MPU_PRESC		(1<<15)
-#define CSCR_SPEN		(1<<1)
-#define CSCR_MPEN		(1<<0)
-
-#define MPCTL0 __REG(IMX_PLL_BASE + 0x4)  /* MCU PLL Control Register 0 */
-#define MPCTL1 __REG(IMX_PLL_BASE + 0x8)  /* MCU PLL and System Clock Register 1 */
-#define SPCTL0 __REG(IMX_PLL_BASE + 0xc)  /* System PLL Control Register 0 */
-#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */
-#define PCDR   __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */
-
-/*
- *  GPIO Module and I/O Multiplexer
- *  x = 0..3 for reg_A, reg_B, reg_C, reg_D
- */
-#define DDIR(x)    __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8)
-#define OCR1(x)    __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8)
-#define OCR2(x)    __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8)
-#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8)
-#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8)
-#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8)
-#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8)
-#define DR(x)      __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8)
-#define GIUS(x)    __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8)
-#define SSR(x)     __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8)
-#define ICR1(x)    __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8)
-#define ICR2(x)    __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8)
-#define IMR(x)     __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8)
-#define ISR(x)     __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8)
-#define GPR(x)     __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8)
-#define SWR(x)     __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8)
-#define PUEN(x)    __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8)
-
-#define GPIO_PORT_MAX  3
-
-#define GPIO_PIN_MASK 0x1f
-#define GPIO_PORT_MASK (0x3 << 5)
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORTA (0<<5)
-#define GPIO_PORTB (1<<5)
-#define GPIO_PORTC (2<<5)
-#define GPIO_PORTD (3<<5)
-
-#define GPIO_OUT   (1<<7)
-#define GPIO_IN    (0<<7)
-#define GPIO_PUEN  (1<<8)
-
-#define GPIO_PF    (0<<9)
-#define GPIO_AF    (1<<9)
-
-#define GPIO_OCR_SHIFT 10
-#define GPIO_OCR_MASK (3<<10)
-#define GPIO_AIN   (0<<10)
-#define GPIO_BIN   (1<<10)
-#define GPIO_CIN   (2<<10)
-#define GPIO_DR    (3<<10)
-
-#define GPIO_AOUT_SHIFT 12
-#define GPIO_AOUT_MASK (3<<12)
-#define GPIO_AOUT     (0<<12)
-#define GPIO_AOUT_ISR (1<<12)
-#define GPIO_AOUT_0   (2<<12)
-#define GPIO_AOUT_1   (3<<12)
-
-#define GPIO_BOUT_SHIFT 14
-#define GPIO_BOUT_MASK (3<<14)
-#define GPIO_BOUT      (0<<14)
-#define GPIO_BOUT_ISR  (1<<14)
-#define GPIO_BOUT_0    (2<<14)
-#define GPIO_BOUT_1    (3<<14)
-
-#define GPIO_GIUS      (1<<16)
-
-/* assignements for GPIO alternate/primary functions */
-
-/* FIXME: This list is not completed. The correct directions are
- * missing on some (many) pins
- */
-#define PA0_AIN_SPI2_CLK     ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0 )
-#define PA0_AF_ETMTRACESYNC  ( GPIO_PORTA | GPIO_AF | 0 )
-#define PA1_AOUT_SPI2_RXD    ( GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1 )
-#define PA1_PF_TIN           ( GPIO_PORTA | GPIO_PF | 1 )
-#define PA2_PF_PWM0          ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 )
-#define PA3_PF_CSI_MCLK      ( GPIO_PORTA | GPIO_PF | 3 )
-#define PA4_PF_CSI_D0        ( GPIO_PORTA | GPIO_PF | 4 )
-#define PA5_PF_CSI_D1        ( GPIO_PORTA | GPIO_PF | 5 )
-#define PA6_PF_CSI_D2        ( GPIO_PORTA | GPIO_PF | 6 )
-#define PA7_PF_CSI_D3        ( GPIO_PORTA | GPIO_PF | 7 )
-#define PA8_PF_CSI_D4        ( GPIO_PORTA | GPIO_PF | 8 )
-#define PA9_PF_CSI_D5        ( GPIO_PORTA | GPIO_PF | 9 )
-#define PA10_PF_CSI_D6       ( GPIO_PORTA | GPIO_PF | 10 )
-#define PA11_PF_CSI_D7       ( GPIO_PORTA | GPIO_PF | 11 )
-#define PA12_PF_CSI_VSYNC    ( GPIO_PORTA | GPIO_PF | 12 )
-#define PA13_PF_CSI_HSYNC    ( GPIO_PORTA | GPIO_PF | 13 )
-#define PA14_PF_CSI_PIXCLK   ( GPIO_PORTA | GPIO_PF | 14 )
-#define PA15_PF_I2C_SDA      ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 )
-#define PA16_PF_I2C_SCL      ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 )
-#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 )
-#define PA17_AIN_SPI2_SS     ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17 )
-#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 )
-#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 )
-#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 )
-#define PA21_PF_A0           ( GPIO_PORTA | GPIO_PF | 21 )
-#define PA22_PF_CS4          ( GPIO_PORTA | GPIO_PF | 22 )
-#define PA23_PF_CS5          ( GPIO_PORTA | GPIO_PF | 23 )
-#define PA24_PF_A16          ( GPIO_PORTA | GPIO_PF | 24 )
-#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 )
-#define PA25_PF_A17          ( GPIO_PORTA | GPIO_PF | 25 )
-#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 )
-#define PA26_PF_A18          ( GPIO_PORTA | GPIO_PF | 26 )
-#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 )
-#define PA27_PF_A19          ( GPIO_PORTA | GPIO_PF | 27 )
-#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 )
-#define PA28_PF_A20          ( GPIO_PORTA | GPIO_PF | 28 )
-#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 )
-#define PA29_PF_A21          ( GPIO_PORTA | GPIO_PF | 29 )
-#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 )
-#define PA30_PF_A22          ( GPIO_PORTA | GPIO_PF | 30 )
-#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 )
-#define PA31_PF_A23          ( GPIO_PORTA | GPIO_PF | 31 )
-#define PA31_AF_ETMTRACECLK  ( GPIO_PORTA | GPIO_AF | 31 )
-#define PB8_PF_SD_DAT0       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 )
-#define PB8_AF_MS_PIO        ( GPIO_PORTB | GPIO_AF | 8 )
-#define PB9_PF_SD_DAT1       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 9 )
-#define PB9_AF_MS_PI1        ( GPIO_PORTB | GPIO_AF | 9 )
-#define PB10_PF_SD_DAT2      ( GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 10 )
-#define PB10_AF_MS_SCLKI     ( GPIO_PORTB | GPIO_AF | 10 )
-#define PB11_PF_SD_DAT3      ( GPIO_PORTB | GPIO_PF | 11 )
-#define PB11_AF_MS_SDIO      ( GPIO_PORTB | GPIO_AF | 11 )
-#define PB12_PF_SD_CLK       ( GPIO_PORTB | GPIO_PF | 12 )
-#define PB12_AF_MS_SCLK0     ( GPIO_PORTB | GPIO_AF | 12 )
-#define PB13_PF_SD_CMD       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 )
-#define PB13_AF_MS_BS        ( GPIO_PORTB | GPIO_AF | 13 )
-#define PB14_AF_SSI_RXFS     ( GPIO_PORTB | GPIO_AF | 14 )
-#define PB15_AF_SSI_RXCLK    ( GPIO_PORTB | GPIO_AF | 15 )
-#define PB16_AF_SSI_RXDAT    ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 )
-#define PB17_AF_SSI_TXDAT    ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 )
-#define PB18_AF_SSI_TXFS     ( GPIO_PORTB | GPIO_AF | 18 )
-#define PB19_AF_SSI_TXCLK    ( GPIO_PORTB | GPIO_AF | 19 )
-#define PB20_PF_USBD_AFE     ( GPIO_PORTB | GPIO_PF | 20 )
-#define PB21_PF_USBD_OE      ( GPIO_PORTB | GPIO_PF | 21 )
-#define PB22_PFUSBD_RCV      ( GPIO_PORTB | GPIO_PF | 22 )
-#define PB23_PF_USBD_SUSPND  ( GPIO_PORTB | GPIO_PF | 23 )
-#define PB24_PF_USBD_VP      ( GPIO_PORTB | GPIO_PF | 24 )
-#define PB25_PF_USBD_VM      ( GPIO_PORTB | GPIO_PF | 25 )
-#define PB26_PF_USBD_VPO     ( GPIO_PORTB | GPIO_PF | 26 )
-#define PB27_PF_USBD_VMO     ( GPIO_PORTB | GPIO_PF | 27 )
-#define PB28_PF_UART2_CTS    ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 )
-#define PB29_PF_UART2_RTS    ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 )
-#define PB30_PF_UART2_TXD    ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 )
-#define PB31_PF_UART2_RXD    ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 )
-#define PC3_PF_SSI_RXFS      ( GPIO_PORTC | GPIO_PF | 3 )
-#define PC4_PF_SSI_RXCLK     ( GPIO_PORTC | GPIO_PF | 4 )
-#define PC5_PF_SSI_RXDAT     ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 )
-#define PC6_PF_SSI_TXDAT     ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 )
-#define PC7_PF_SSI_TXFS      ( GPIO_PORTC | GPIO_PF | 7 )
-#define PC8_PF_SSI_TXCLK     ( GPIO_PORTC | GPIO_PF | 8 )
-#define PC9_PF_UART1_CTS     ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 )
-#define PC10_PF_UART1_RTS    ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 )
-#define PC11_PF_UART1_TXD    ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 )
-#define PC12_PF_UART1_RXD    ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 )
-#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 )
-#define PC14_PF_SPI1_SCLK    ( GPIO_PORTC | GPIO_PF | 14 )
-#define PC15_PF_SPI1_SS      ( GPIO_PORTC | GPIO_PF | 15 )
-#define PC16_PF_SPI1_MISO    ( GPIO_PORTC | GPIO_PF | 16 )
-#define PC17_PF_SPI1_MOSI    ( GPIO_PORTC | GPIO_PF | 17 )
-#define PC24_BIN_UART3_RI    ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24 )
-#define PC25_BIN_UART3_DSR   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25 )
-#define PC26_AOUT_UART3_DTR  ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26 )
-#define PC27_BIN_UART3_DCD   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27 )
-#define PC28_BIN_UART3_CTS   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28 )
-#define PC29_AOUT_UART3_RTS  ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29 )
-#define PC30_BIN_UART3_TX    ( GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30 )
-#define PC31_AOUT_UART3_RX   ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31)
-#define PD6_PF_LSCLK         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 )
-#define PD7_PF_REV           ( GPIO_PORTD | GPIO_PF | 7 )
-#define PD7_AF_UART2_DTR     ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
-#define PD7_AIN_SPI2_SCLK    ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 )
-#define PD8_PF_CLS           ( GPIO_PORTD | GPIO_PF | 8 )
-#define PD8_AF_UART2_DCD     ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 )
-#define PD8_AIN_SPI2_SS      ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8 )
-#define PD9_PF_PS            ( GPIO_PORTD | GPIO_PF | 9 )
-#define PD9_AF_UART2_RI      ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 )
-#define PD9_AOUT_SPI2_RXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9 )
-#define PD10_PF_SPL_SPR      ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 )
-#define PD10_AF_UART2_DSR    ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 )
-#define PD10_AIN_SPI2_TXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10 )
-#define PD11_PF_CONTRAST     ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 )
-#define PD12_PF_ACD_OE       ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 )
-#define PD13_PF_LP_HSYNC     ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 )
-#define PD14_PF_FLM_VSYNC    ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 )
-#define PD15_PF_LD0          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 )
-#define PD16_PF_LD1          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 )
-#define PD17_PF_LD2          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 )
-#define PD18_PF_LD3          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 )
-#define PD19_PF_LD4          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 )
-#define PD20_PF_LD5          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 )
-#define PD21_PF_LD6          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 )
-#define PD22_PF_LD7          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 )
-#define PD23_PF_LD8          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 )
-#define PD24_PF_LD9          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 )
-#define PD25_PF_LD10         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 )
-#define PD26_PF_LD11         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 )
-#define PD27_PF_LD12         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 )
-#define PD28_PF_LD13         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 )
-#define PD29_PF_LD14         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 )
-#define PD30_PF_LD15         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 )
-#define PD31_PF_TMR2OUT      ( GPIO_PORTD | GPIO_PF | 31 )
-#define PD31_BIN_SPI2_TXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31 )
-
-/*
- * PWM controller
- */
-#define PWMC	__REG(IMX_PWM_BASE + 0x00)	/* PWM Control Register		*/
-#define PWMS	__REG(IMX_PWM_BASE + 0x04)	/* PWM Sample Register		*/
-#define PWMP	__REG(IMX_PWM_BASE + 0x08)	/* PWM Period Register		*/
-#define PWMCNT	__REG(IMX_PWM_BASE + 0x0C)	/* PWM Counter Register		*/
-
-#define PWMC_HCTR		(0x01<<18)		/* Halfword FIFO Data Swapping	*/
-#define PWMC_BCTR		(0x01<<17)		/* Byte FIFO Data Swapping	*/
-#define PWMC_SWR		(0x01<<16)		/* Software Reset		*/
-#define PWMC_CLKSRC		(0x01<<15)		/* Clock Source			*/
-#define PWMC_PRESCALER(x)	(((x-1) & 0x7F) << 8)	/* PRESCALER			*/
-#define PWMC_IRQ		(0x01<< 7)		/* Interrupt Request		*/
-#define PWMC_IRQEN		(0x01<< 6)		/* Interrupt Request Enable	*/
-#define PWMC_FIFOAV		(0x01<< 5)		/* FIFO Available		*/
-#define PWMC_EN			(0x01<< 4)		/* Enables/Disables the PWM	*/
-#define PWMC_REPEAT(x)		(((x) & 0x03) << 2)	/* Sample Repeats		*/
-#define PWMC_CLKSEL(x)		(((x) & 0x03) << 0)	/* Clock Selection		*/
-
-#define PWMS_SAMPLE(x)		((x) & 0xFFFF)		/* Contains a two-sample word	*/
-#define PWMP_PERIOD(x)		((x) & 0xFFFF)		/* Represents the PWM's period	*/
-#define PWMC_COUNTER(x)		((x) & 0xFFFF)		/* Represents the current count value	*/
-
-/*
- *  DMA Controller
- */
-#define DCR     __REG(IMX_DMAC_BASE +0x00)	/* DMA Control Register */
-#define DISR    __REG(IMX_DMAC_BASE +0x04)	/* DMA Interrupt status Register */
-#define DIMR    __REG(IMX_DMAC_BASE +0x08)	/* DMA Interrupt mask Register */
-#define DBTOSR  __REG(IMX_DMAC_BASE +0x0c)	/* DMA Burst timeout status Register */
-#define DRTOSR  __REG(IMX_DMAC_BASE +0x10)	/* DMA Request timeout Register */
-#define DSESR   __REG(IMX_DMAC_BASE +0x14)	/* DMA Transfer Error Status Register */
-#define DBOSR   __REG(IMX_DMAC_BASE +0x18)	/* DMA Buffer overflow status Register */
-#define DBTOCR  __REG(IMX_DMAC_BASE +0x1c)	/* DMA Burst timeout control Register */
-#define WSRA    __REG(IMX_DMAC_BASE +0x40)	/* W-Size Register A */
-#define XSRA    __REG(IMX_DMAC_BASE +0x44)	/* X-Size Register A */
-#define YSRA    __REG(IMX_DMAC_BASE +0x48)	/* Y-Size Register A */
-#define WSRB    __REG(IMX_DMAC_BASE +0x4c)	/* W-Size Register B */
-#define XSRB    __REG(IMX_DMAC_BASE +0x50)	/* X-Size Register B */
-#define YSRB    __REG(IMX_DMAC_BASE +0x54)	/* Y-Size Register B */
-#define SAR(x)  __REG2( IMX_DMAC_BASE + 0x80, (x) << 6)	/* Source Address Registers */
-#define DAR(x)  __REG2( IMX_DMAC_BASE + 0x84, (x) << 6)	/* Destination Address Registers */
-#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6)	/* Count Registers */
-#define CCR(x)  __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6)	/* Control Registers */
-#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6)	/* Request source select Registers */
-#define BLR(x)  __REG2( IMX_DMAC_BASE + 0x94, (x) << 6)	/* Burst length Registers */
-#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6)	/* Request timeout Registers */
-#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6)	/* Bus Utilization Registers */
-
-#define DCR_DRST           (1<<1)
-#define DCR_DEN            (1<<0)
-#define DBTOCR_EN          (1<<15)
-#define DBTOCR_CNT(x)      ((x) & 0x7fff )
-#define CNTR_CNT(x)        ((x) & 0xffffff )
-#define CCR_DMOD_LINEAR    ( 0x0 << 12 )
-#define CCR_DMOD_2D        ( 0x1 << 12 )
-#define CCR_DMOD_FIFO      ( 0x2 << 12 )
-#define CCR_DMOD_EOBFIFO   ( 0x3 << 12 )
-#define CCR_SMOD_LINEAR    ( 0x0 << 10 )
-#define CCR_SMOD_2D        ( 0x1 << 10 )
-#define CCR_SMOD_FIFO      ( 0x2 << 10 )
-#define CCR_SMOD_EOBFIFO   ( 0x3 << 10 )
-#define CCR_MDIR_DEC       (1<<9)
-#define CCR_MSEL_B         (1<<8)
-#define CCR_DSIZ_32        ( 0x0 << 6 )
-#define CCR_DSIZ_8         ( 0x1 << 6 )
-#define CCR_DSIZ_16        ( 0x2 << 6 )
-#define CCR_SSIZ_32        ( 0x0 << 4 )
-#define CCR_SSIZ_8         ( 0x1 << 4 )
-#define CCR_SSIZ_16        ( 0x2 << 4 )
-#define CCR_REN            (1<<3)
-#define CCR_RPT            (1<<2)
-#define CCR_FRC            (1<<1)
-#define CCR_CEN            (1<<0)
-#define RTOR_EN            (1<<15)
-#define RTOR_CLK           (1<<14)
-#define RTOR_PSC           (1<<13)
-
-/*
- *  Interrupt controller
- */
-
-#define IMX_INTCNTL        __REG(IMX_AITC_BASE+0x00)
-#define INTCNTL_FIAD       (1<<19)
-#define INTCNTL_NIAD       (1<<20)
-
-#define IMX_NIMASK         __REG(IMX_AITC_BASE+0x04)
-#define IMX_INTENNUM       __REG(IMX_AITC_BASE+0x08)
-#define IMX_INTDISNUM      __REG(IMX_AITC_BASE+0x0c)
-#define IMX_INTENABLEH     __REG(IMX_AITC_BASE+0x10)
-#define IMX_INTENABLEL     __REG(IMX_AITC_BASE+0x14)
-
-/*
- *  General purpose timers
- */
-#define IMX_TCTL(x)        __REG( 0x00 + (x))
-#define TCTL_SWR           (1<<15)
-#define TCTL_FRR           (1<<8)
-#define TCTL_CAP_RIS       (1<<6)
-#define TCTL_CAP_FAL       (2<<6)
-#define TCTL_CAP_RIS_FAL   (3<<6)
-#define TCTL_OM            (1<<5)
-#define TCTL_IRQEN         (1<<4)
-#define TCTL_CLK_PCLK1     (1<<1)
-#define TCTL_CLK_PCLK1_16  (2<<1)
-#define TCTL_CLK_TIN       (3<<1)
-#define TCTL_CLK_32        (4<<1)
-#define TCTL_TEN           (1<<0)
-
-#define IMX_TPRER(x)       __REG( 0x04 + (x))
-#define IMX_TCMP(x)        __REG( 0x08 + (x))
-#define IMX_TCR(x)         __REG( 0x0C + (x))
-#define IMX_TCN(x)         __REG( 0x10 + (x))
-#define IMX_TSTAT(x)       __REG( 0x14 + (x))
-#define TSTAT_CAPT         (1<<1)
-#define TSTAT_COMP         (1<<0)
-
-#endif				// _IMX_REGS_H
diff --git a/arch/arm/mach-imx/include/mach/imx-uart.h b/arch/arm/mach-imx/include/mach/imx-uart.h
deleted file mode 100644
index d54eb1d4802..00000000000
--- a/arch/arm/mach-imx/include/mach/imx-uart.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef ASMARM_ARCH_UART_H
-#define ASMARM_ARCH_UART_H
-
-#define IMXUART_HAVE_RTSCTS (1<<0)
-
-struct imxuart_platform_data {
-	int (*init)(struct platform_device *pdev);
-	void (*exit)(struct platform_device *pdev);
-	unsigned int flags;
-};
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/io.h b/arch/arm/mach-imx/include/mach/io.h
deleted file mode 100644
index 9e197ae4590..00000000000
--- a/arch/arm/mach-imx/include/mach/io.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *  arch/arm/mach-imxads/include/mach/io.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#define __io(a)		__typesafe_io(a)
-#define __mem_pci(a)	(a)
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/irqs.h b/arch/arm/mach-imx/include/mach/irqs.h
deleted file mode 100644
index 67812c5ac1f..00000000000
--- a/arch/arm/mach-imx/include/mach/irqs.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  arch/arm/mach-imxads/include/mach/irqs.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ARM_IRQS_H__
-#define __ARM_IRQS_H__
-
-/* Use the imx definitions */
-#include <mach/hardware.h>
-
-/*
- *  IMX Interrupt numbers
- *
- */
-#define INT_SOFTINT                 0
-#define CSI_INT                     6
-#define DSPA_MAC_INT                7
-#define DSPA_INT                    8
-#define COMP_INT                    9
-#define MSHC_XINT                   10
-#define GPIO_INT_PORTA              11
-#define GPIO_INT_PORTB              12
-#define GPIO_INT_PORTC              13
-#define LCDC_INT                    14
-#define SIM_INT                     15
-#define SIM_DATA_INT                16
-#define RTC_INT                     17
-#define RTC_SAMINT                  18
-#define UART2_MINT_PFERR            19
-#define UART2_MINT_RTS              20
-#define UART2_MINT_DTR              21
-#define UART2_MINT_UARTC            22
-#define UART2_MINT_TX               23
-#define UART2_MINT_RX               24
-#define UART1_MINT_PFERR            25
-#define UART1_MINT_RTS              26
-#define UART1_MINT_DTR              27
-#define UART1_MINT_UARTC            28
-#define UART1_MINT_TX               29
-#define UART1_MINT_RX               30
-#define VOICE_DAC_INT               31
-#define VOICE_ADC_INT               32
-#define PEN_DATA_INT                33
-#define PWM_INT                     34
-#define SDHC_INT                    35
-#define I2C_INT                     39
-#define CSPI_INT                    41
-#define SSI_TX_INT                  42
-#define SSI_TX_ERR_INT              43
-#define SSI_RX_INT                  44
-#define SSI_RX_ERR_INT              45
-#define TOUCH_INT                   46
-#define USBD_INT0                   47
-#define USBD_INT1                   48
-#define USBD_INT2                   49
-#define USBD_INT3                   50
-#define USBD_INT4                   51
-#define USBD_INT5                   52
-#define USBD_INT6                   53
-#define BTSYS_INT                   55
-#define BTTIM_INT                   56
-#define BTWUI_INT                   57
-#define TIM2_INT                    58
-#define TIM1_INT                    59
-#define DMA_ERR                     60
-#define DMA_INT                     61
-#define GPIO_INT_PORTD              62
-
-#define IMX_IRQS                         (64)
-
-/* note: the IMX has four gpio ports (A-D), but only
- *       the following pins are connected to the outside
- *       world:
- *
- * PORT A: bits 0-31
- * PORT B: bits 8-31
- * PORT C: bits 3-17
- * PORT D: bits 6-31
- *
- * We map these interrupts straight on. As a result we have
- * several holes in the interrupt mapping. We do this for two
- * reasons:
- *   - mapping the interrupts without holes would get
- *     far more complicated
- *   - Motorola could well decide to bring some processor
- *     with more pins connected
- */
-
-#define IRQ_GPIOA(x)  (IMX_IRQS + x)
-#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
-
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
-
-/* all normal IRQs can be FIQs */
-#define FIQ_START	0
-/* switch betwean IRQ and FIQ */
-extern int imx_set_irq_fiq(unsigned int irq, unsigned int type);
-
-#define NR_IRQS (IRQ_GPIOD(32) + 1)
-#define IRQ_GPIO(x)
-#endif
diff --git a/arch/arm/mach-imx/include/mach/memory.h b/arch/arm/mach-imx/include/mach/memory.h
deleted file mode 100644
index a93df7cba69..00000000000
--- a/arch/arm/mach-imx/include/mach/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *  arch/arm/mach-imx/include/mach/memory.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_MMU_H
-#define __ASM_ARCH_MMU_H
-
-#define PHYS_OFFSET	UL(0x08000000)
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/mmc.h b/arch/arm/mach-imx/include/mach/mmc.h
deleted file mode 100644
index 4712f354dcc..00000000000
--- a/arch/arm/mach-imx/include/mach/mmc.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef ASMARM_ARCH_MMC_H
-#define ASMARM_ARCH_MMC_H
-
-#include <linux/mmc/host.h>
-
-struct device;
-
-struct imxmmc_platform_data {
-	int (*card_present)(struct device *);
-	int (*get_ro)(struct device *);
-};
-
-extern void imx_set_mmc_info(struct imxmmc_platform_data *info);
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/mx1ads.h b/arch/arm/mach-imx/include/mach/mx1ads.h
deleted file mode 100644
index def05d510eb..00000000000
--- a/arch/arm/mach-imx/include/mach/mx1ads.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/mx1ads.h
- *
- * Copyright (C) 2004 Robert Schwebel, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#ifndef __ASM_ARCH_MX1ADS_H
-#define __ASM_ARCH_MX1ADS_H
-
-/* ------------------------------------------------------------------------ */
-/* Memory Map for the M9328MX1ADS (MX1ADS) Board                            */
-/* ------------------------------------------------------------------------ */
-
-#define MX1ADS_FLASH_PHYS		0x10000000
-#define MX1ADS_FLASH_SIZE		(16*1024*1024)
-
-#define IMX_FB_PHYS			(0x0C000000 - 0x40000)
-
-#define CLK32 32000
-
-#endif /* __ASM_ARCH_MX1ADS_H */
diff --git a/arch/arm/mach-imx/include/mach/spi_imx.h b/arch/arm/mach-imx/include/mach/spi_imx.h
deleted file mode 100644
index 4186430feec..00000000000
--- a/arch/arm/mach-imx/include/mach/spi_imx.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * arch/arm/mach-imx/include/mach/spi_imx.h
- *
- * Copyright (C) 2006 SWAPP
- *	Andrea Paterniani <a.paterniani@swapp-eng.it>
- *
- * Initial version inspired by:
- *	linux-2.6.17-rc3-mm1/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef SPI_IMX_H_
-#define SPI_IMX_H_
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_master - device.platform_data for SPI controller devices.
- * @num_chipselect: chipselects are used to distinguish individual
- *	SPI slaves, and are numbered from zero to num_chipselects - 1.
- *	each slave has a chipselect signal, but it's common that not
- *	every chipselect is connected to a slave.
- * @enable_dma: if true enables DMA driven transfers.
-*/
-struct spi_imx_master {
-	u8 num_chipselect;
-	u8 enable_dma:1;
-};
-/*-------------------------------------------------------------------------*/
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_chip - spi_board_info.controller_data for SPI
- * slave devices, copied to spi_device.controller_data.
- * @enable_loopback : used for test purpouse to internally connect RX and TX
- *	sections.
- * @enable_dma : enables dma transfer (provided that controller driver has
- *	dma enabled too).
- * @ins_ss_pulse : enable /SS pulse insertion between SPI burst.
- * @bclk_wait : number of bclk waits between each bits_per_word SPI burst.
- * @cs_control : function pointer to board-specific function to assert/deassert
- *	I/O port to control HW generation of devices chip-select.
-*/
-struct spi_imx_chip {
-	u8	enable_loopback:1;
-	u8	enable_dma:1;
-	u8	ins_ss_pulse:1;
-	u16	bclk_wait:15;
-	void (*cs_control)(u32 control);
-};
-
-/* Chip-select state */
-#define SPI_CS_ASSERT			(1 << 0)
-#define SPI_CS_DEASSERT			(1 << 1)
-/*-------------------------------------------------------------------------*/
-
-
-#endif /* SPI_IMX_H_*/
diff --git a/arch/arm/mach-imx/include/mach/system.h b/arch/arm/mach-imx/include/mach/system.h
deleted file mode 100644
index 46d4ca91af7..00000000000
--- a/arch/arm/mach-imx/include/mach/system.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *  arch/arm/mach-imxads/include/mach/system.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void
-arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-static inline void
-arch_reset(char mode, const char *cmd)
-{
-	cpu_reset(0);
-}
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/timex.h b/arch/arm/mach-imx/include/mach/timex.h
deleted file mode 100644
index e22ba789546..00000000000
--- a/arch/arm/mach-imx/include/mach/timex.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *  linux/include/asm-arm/imx/timex.h
- *
- *  Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#define CLOCK_TICK_RATE		(16000000)
-
-#endif
diff --git a/arch/arm/mach-imx/include/mach/uncompress.h b/arch/arm/mach-imx/include/mach/uncompress.h
deleted file mode 100644
index 70523e67a8f..00000000000
--- a/arch/arm/mach-imx/include/mach/uncompress.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- *  arch/arm/mach-imxads/include/mach/uncompress.h
- *
- *
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
-
-#define UART1_BASE 0x206000
-#define UART2_BASE 0x207000
-#define USR2 0x98
-#define USR2_TXFE (1<<14)
-#define TXR  0x40
-#define UCR1 0x80
-#define UCR1_UARTEN 1
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  We search for the first enabled
- * port in the most probable order.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static void putc(int c)
-{
-	unsigned long serial_port;
-
-	do {
-		serial_port = UART1_BASE;
-		if ( UART(UCR1) & UCR1_UARTEN )
-			break;
-		serial_port = UART2_BASE;
-		if ( UART(UCR1) & UCR1_UARTEN )
-			break;
-		return;
-	} while(0);
-
-	while (!(UART(USR2) & USR2_TXFE))
-		barrier();
-
-	UART(TXR) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-imx/include/mach/vmalloc.h b/arch/arm/mach-imx/include/mach/vmalloc.h
deleted file mode 100644
index 7d7cb0bde3e..00000000000
--- a/arch/arm/mach-imx/include/mach/vmalloc.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  arch/arm/mach-imx/include/mach/vmalloc.h
- *
- *  Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
deleted file mode 100644
index 531b95deadc..00000000000
--- a/arch/arm/mach-imx/irq.c
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
- *  linux/arch/arm/mach-imx/irq.c
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *  03/03/2004   Sascha Hauer <sascha@saschahauer.de>
- *               Copied from the motorola bsp package and added gpio demux
- *               interrupt handler
- */
-
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-/*
- *
- * We simply use the ENABLE DISABLE registers inside of the IMX
- * to turn on/off specific interrupts.
- *
- */
-
-#define INTCNTL_OFF               0x00
-#define NIMASK_OFF                0x04
-#define INTENNUM_OFF              0x08
-#define INTDISNUM_OFF             0x0C
-#define INTENABLEH_OFF            0x10
-#define INTENABLEL_OFF            0x14
-#define INTTYPEH_OFF              0x18
-#define INTTYPEL_OFF              0x1C
-#define NIPRIORITY_OFF(x)         (0x20+4*(7-(x)))
-#define NIVECSR_OFF               0x40
-#define FIVECSR_OFF               0x44
-#define INTSRCH_OFF               0x48
-#define INTSRCL_OFF               0x4C
-#define INTFRCH_OFF               0x50
-#define INTFRCL_OFF               0x54
-#define NIPNDH_OFF                0x58
-#define NIPNDL_OFF                0x5C
-#define FIPNDH_OFF                0x60
-#define FIPNDL_OFF                0x64
-
-#define VA_AITC_BASE              IO_ADDRESS(IMX_AITC_BASE)
-#define IMX_AITC_INTCNTL         (VA_AITC_BASE + INTCNTL_OFF)
-#define IMX_AITC_NIMASK          (VA_AITC_BASE + NIMASK_OFF)
-#define IMX_AITC_INTENNUM        (VA_AITC_BASE + INTENNUM_OFF)
-#define IMX_AITC_INTDISNUM       (VA_AITC_BASE + INTDISNUM_OFF)
-#define IMX_AITC_INTENABLEH      (VA_AITC_BASE + INTENABLEH_OFF)
-#define IMX_AITC_INTENABLEL      (VA_AITC_BASE + INTENABLEL_OFF)
-#define IMX_AITC_INTTYPEH        (VA_AITC_BASE + INTTYPEH_OFF)
-#define IMX_AITC_INTTYPEL        (VA_AITC_BASE + INTTYPEL_OFF)
-#define IMX_AITC_NIPRIORITY(x)   (VA_AITC_BASE + NIPRIORITY_OFF(x))
-#define IMX_AITC_NIVECSR         (VA_AITC_BASE + NIVECSR_OFF)
-#define IMX_AITC_FIVECSR         (VA_AITC_BASE + FIVECSR_OFF)
-#define IMX_AITC_INTSRCH         (VA_AITC_BASE + INTSRCH_OFF)
-#define IMX_AITC_INTSRCL         (VA_AITC_BASE + INTSRCL_OFF)
-#define IMX_AITC_INTFRCH         (VA_AITC_BASE + INTFRCH_OFF)
-#define IMX_AITC_INTFRCL         (VA_AITC_BASE + INTFRCL_OFF)
-#define IMX_AITC_NIPNDH          (VA_AITC_BASE + NIPNDH_OFF)
-#define IMX_AITC_NIPNDL          (VA_AITC_BASE + NIPNDL_OFF)
-#define IMX_AITC_FIPNDH          (VA_AITC_BASE + FIPNDH_OFF)
-#define IMX_AITC_FIPNDL          (VA_AITC_BASE + FIPNDL_OFF)
-
-#if 0
-#define DEBUG_IRQ(fmt...)	printk(fmt)
-#else
-#define DEBUG_IRQ(fmt...)	do { } while (0)
-#endif
-
-static void
-imx_mask_irq(unsigned int irq)
-{
-	__raw_writel(irq, IMX_AITC_INTDISNUM);
-}
-
-static void
-imx_unmask_irq(unsigned int irq)
-{
-	__raw_writel(irq, IMX_AITC_INTENNUM);
-}
-
-#ifdef CONFIG_FIQ
-int imx_set_irq_fiq(unsigned int irq, unsigned int type)
-{
-	unsigned int irqt;
-
-	if (irq >= IMX_IRQS)
-		return -EINVAL;
-
-	if (irq < IMX_IRQS / 2) {
-		irqt = __raw_readl(IMX_AITC_INTTYPEL) & ~(1 << irq);
-		__raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEL);
-	} else {
-		irq -= IMX_IRQS / 2;
-		irqt = __raw_readl(IMX_AITC_INTTYPEH) & ~(1 << irq);
-		__raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEH);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(imx_set_irq_fiq);
-#endif /* CONFIG_FIQ */
-
-static int
-imx_gpio_irq_type(unsigned int _irq, unsigned int type)
-{
-	unsigned int irq_type = 0, irq, reg, bit;
-
-	irq = _irq - IRQ_GPIOA(0);
-	reg = irq >> 5;
-	bit = 1 << (irq % 32);
-
-	if (type == IRQ_TYPE_PROBE) {
-		/* Don't mess with enabled GPIOs using preconfigured edges or
-		   GPIOs set to alternate function during probe */
-		/* TODO: support probe */
-//              if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx]) &
-//                  GPIO_bit(gpio))
-//                      return 0;
-//              if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2)))
-//                      return 0;
-//              type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-	}
-
-	GIUS(reg) |= bit;
-	DDIR(reg) &= ~(bit);
-
-	DEBUG_IRQ("setting type of irq %d to ", _irq);
-
-	if (type & IRQ_TYPE_EDGE_RISING) {
-		DEBUG_IRQ("rising edges\n");
-		irq_type = 0x0;
-	}
-	if (type & IRQ_TYPE_EDGE_FALLING) {
-		DEBUG_IRQ("falling edges\n");
-		irq_type = 0x1;
-	}
-	if (type & IRQ_TYPE_LEVEL_LOW) {
-		DEBUG_IRQ("low level\n");
-		irq_type = 0x3;
-	}
-	if (type & IRQ_TYPE_LEVEL_HIGH) {
-		DEBUG_IRQ("high level\n");
-		irq_type = 0x2;
-	}
-
-	if (irq % 32 < 16) {
-		ICR1(reg) = (ICR1(reg) & ~(0x3 << ((irq % 16) * 2))) |
-		    (irq_type << ((irq % 16) * 2));
-	} else {
-		ICR2(reg) = (ICR2(reg) & ~(0x3 << ((irq % 16) * 2))) |
-		    (irq_type << ((irq % 16) * 2));
-	}
-
-	return 0;
-
-}
-
-static void
-imx_gpio_ack_irq(unsigned int irq)
-{
-	DEBUG_IRQ("%s: irq %d\n", __func__, irq);
-	ISR(IRQ_TO_REG(irq)) = 1 << ((irq - IRQ_GPIOA(0)) % 32);
-}
-
-static void
-imx_gpio_mask_irq(unsigned int irq)
-{
-	DEBUG_IRQ("%s: irq %d\n", __func__, irq);
-	IMR(IRQ_TO_REG(irq)) &= ~( 1 << ((irq - IRQ_GPIOA(0)) % 32));
-}
-
-static void
-imx_gpio_unmask_irq(unsigned int irq)
-{
-	DEBUG_IRQ("%s: irq %d\n", __func__, irq);
-	IMR(IRQ_TO_REG(irq)) |= 1 << ((irq - IRQ_GPIOA(0)) % 32);
-}
-
-static void
-imx_gpio_handler(unsigned int mask, unsigned int irq,
-                 struct irq_desc *desc)
-{
-	while (mask) {
-		if (mask & 1) {
-			DEBUG_IRQ("handling irq %d\n", irq);
-			generic_handle_irq(irq);
-		}
-		irq++;
-		mask >>= 1;
-	}
-}
-
-static void
-imx_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = ISR(0);
-	irq = IRQ_GPIOA(0);
-	imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = ISR(1);
-	irq = IRQ_GPIOB(0);
-	imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = ISR(2);
-	irq = IRQ_GPIOC(0);
-	imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = ISR(3);
-	irq = IRQ_GPIOD(0);
-	imx_gpio_handler(mask, irq, desc);
-}
-
-static struct irq_chip imx_internal_chip = {
-	.name = "MPU",
-	.ack = imx_mask_irq,
-	.mask = imx_mask_irq,
-	.unmask = imx_unmask_irq,
-};
-
-static struct irq_chip imx_gpio_chip = {
-	.name = "GPIO",
-	.ack = imx_gpio_ack_irq,
-	.mask = imx_gpio_mask_irq,
-	.unmask = imx_gpio_unmask_irq,
-	.set_type = imx_gpio_irq_type,
-};
-
-void __init
-imx_init_irq(void)
-{
-	unsigned int irq;
-
-	DEBUG_IRQ("Initializing imx interrupts\n");
-
-	/* Disable all interrupts initially. */
-	/* Do not rely on the bootloader. */
-	__raw_writel(0, IMX_AITC_INTENABLEH);
-	__raw_writel(0, IMX_AITC_INTENABLEL);
-
-	/* Mask all GPIO interrupts as well */
-	IMR(0) = 0;
-	IMR(1) = 0;
-	IMR(2) = 0;
-	IMR(3) = 0;
-
-	for (irq = 0; irq < IMX_IRQS; irq++) {
-		set_irq_chip(irq, &imx_internal_chip);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	for (irq = IRQ_GPIOA(0); irq < IRQ_GPIOD(32); irq++) {
-		set_irq_chip(irq, &imx_gpio_chip);
-		set_irq_handler(irq, handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	set_irq_chained_handler(GPIO_INT_PORTA, imx_gpioa_demux_handler);
-	set_irq_chained_handler(GPIO_INT_PORTB, imx_gpiob_demux_handler);
-	set_irq_chained_handler(GPIO_INT_PORTC, imx_gpioc_demux_handler);
-	set_irq_chained_handler(GPIO_INT_PORTD, imx_gpiod_demux_handler);
-
-	/* Release masking of interrupts according to priority */
-	__raw_writel(-1, IMX_AITC_NIMASK);
-
-#ifdef CONFIG_FIQ
-	/* Initialize FIQ */
-	init_FIQ();
-#endif
-}
diff --git a/arch/arm/mach-imx/leds-mx1ads.c b/arch/arm/mach-imx/leds-mx1ads.c
deleted file mode 100644
index 1d48f2762cb..00000000000
--- a/arch/arm/mach-imx/leds-mx1ads.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/leds-mx1ads.c
- *
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/system.h>
-#include <asm/leds.h>
-#include "leds.h"
-
-/*
- * The MX1ADS Board has only one usable LED,
- * so select only the timer led or the
- * cpu usage led
- */
-void
-mx1ads_leds_event(led_event_t ledevt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (ledevt) {
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		DR(0) &= ~(1<<2);
-		break;
-
-	case led_idle_end:
-		DR(0) |= 1<<2;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		DR(0) ^= 1<<2;
-#endif
-	default:
-		break;
-	}
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-imx/leds.c b/arch/arm/mach-imx/leds.c
deleted file mode 100644
index cf30803e019..00000000000
--- a/arch/arm/mach-imx/leds.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * linux/arch/arm/mach-imx/leds.c
- *
- * Copyright (C) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "leds.h"
-
-static int __init
-leds_init(void)
-{
-	if (machine_is_mx1ads()) {
-		leds_event = mx1ads_leds_event;
-	}
-
-	return 0;
-}
-
-__initcall(leds_init);
diff --git a/arch/arm/mach-imx/leds.h b/arch/arm/mach-imx/leds.h
deleted file mode 100644
index 49dc1c1da33..00000000000
--- a/arch/arm/mach-imx/leds.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-imx/leds.h
- *
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * blinky lights for IMX-based systems
- *
- */
-extern void mx1ads_leds_event(led_event_t evt);
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
deleted file mode 100644
index 87fa1ff43b0..00000000000
--- a/arch/arm/mach-imx/mx1ads.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * arch/arm/mach-imx/mx1ads.c
- *
- * Initially based on:
- *	linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
- *	Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/system.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <mach/mmc.h>
-#include <mach/imx-uart.h>
-#include <linux/interrupt.h>
-#include "generic.h"
-
-static struct resource cs89x0_resources[] = {
-	[0] = {
-		.start	= IMX_CS4_PHYS + 0x300,
-		.end	= IMX_CS4_PHYS + 0x300 + 16,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_GPIOC(17),
-		.end	= IRQ_GPIOC(17),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cs89x0_device = {
-	.name		= "cirrus-cs89x0",
-	.num_resources	= ARRAY_SIZE(cs89x0_resources),
-	.resource	= cs89x0_resources,
-};
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct resource imx_uart1_resources[] = {
-	[0] = {
-		.start	= 0x00206000,
-		.end	= 0x002060FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (UART1_MINT_RX),
-		.end	= (UART1_MINT_RX),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= (UART1_MINT_TX),
-		.end	= (UART1_MINT_TX),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= UART1_MINT_RTS,
-		.end	= UART1_MINT_RTS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device imx_uart1_device = {
-	.name		= "imx-uart",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(imx_uart1_resources),
-	.resource	= imx_uart1_resources,
-	.dev = {
-		.platform_data = &uart_pdata,
-	}
-};
-
-static struct resource imx_uart2_resources[] = {
-	[0] = {
-		.start	= 0x00207000,
-		.end	= 0x002070FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (UART2_MINT_RX),
-		.end	= (UART2_MINT_RX),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= (UART2_MINT_TX),
-		.end	= (UART2_MINT_TX),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= UART2_MINT_RTS,
-		.end	= UART2_MINT_RTS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device imx_uart2_device = {
-	.name		= "imx-uart",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(imx_uart2_resources),
-	.resource	= imx_uart2_resources,
-	.dev = {
-		.platform_data = &uart_pdata,
-	}
-};
-
-static struct platform_device *devices[] __initdata = {
-	&cs89x0_device,
-	&imx_uart1_device,
-	&imx_uart2_device,
-};
-
-#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
-static int mx1ads_mmc_card_present(struct device *dev)
-{
-	/* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */
-	return (SSR(1) & (1 << 20) ? 0 : 1);
-}
-
-static struct imxmmc_platform_data mx1ads_mmc_info = {
-       .card_present = mx1ads_mmc_card_present,
-};
-#endif
-
-static void __init
-mx1ads_init(void)
-{
-#ifdef CONFIG_LEDS
-	imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2);
-#endif
-#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
-	/* SD/MMC card detect */
-	imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20);
-	imx_set_mmc_info(&mx1ads_mmc_info);
-#endif
-
-	imx_gpio_mode(PC9_PF_UART1_CTS);
-	imx_gpio_mode(PC10_PF_UART1_RTS);
-	imx_gpio_mode(PC11_PF_UART1_TXD);
-	imx_gpio_mode(PC12_PF_UART1_RXD);
-
-	imx_gpio_mode(PB28_PF_UART2_CTS);
-	imx_gpio_mode(PB29_PF_UART2_RTS);
-	imx_gpio_mode(PB30_PF_UART2_TXD);
-	imx_gpio_mode(PB31_PF_UART2_RXD);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init
-mx1ads_map_io(void)
-{
-	imx_map_io();
-}
-
-MACHINE_START(MX1ADS, "Motorola MX1ADS")
-	/* Maintainer: Sascha Hauer, Pengutronix */
-	.phys_io	= 0x00200000,
-	.io_pg_offst	= ((0xe0000000) >> 18) & 0xfffc,
-	.boot_params	= 0x08000100,
-	.map_io		= mx1ads_map_io,
-	.init_irq	= imx_init_irq,
-	.timer		= &imx_timer,
-	.init_machine	= mx1ads_init,
-MACHINE_END
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
deleted file mode 100644
index 5aef18b599e..00000000000
--- a/arch/arm/mach-imx/time.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- *  linux/arch/arm/mach-imx/time.c
- *
- *  Copyright (C) 2000-2001 Deep Blue Solutions
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/time.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/irq.h>
-#include <asm/mach/time.h>
-
-/* Use timer 1 as system timer */
-#define TIMER_BASE IMX_TIM1_BASE
-
-static struct clock_event_device clockevent_imx;
-static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-imx_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &clockevent_imx;
-	uint32_t tstat;
-	irqreturn_t ret = IRQ_NONE;
-
-	/* clear the interrupt */
-	tstat = IMX_TSTAT(TIMER_BASE);
-	IMX_TSTAT(TIMER_BASE) = 0;
-
-	if (tstat & TSTAT_COMP) {
-		evt->event_handler(evt);
-		ret = IRQ_HANDLED;
-	}
-
-	return ret;
-}
-
-static struct irqaction imx_timer_irq = {
-	.name		= "i.MX Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= imx_timer_interrupt,
-};
-
-/*
- * Set up timer hardware into expected mode and state.
- */
-static void __init imx_timer_hardware_init(void)
-{
-	/*
-	 * Initialise to a known state (all timers off, and timing reset)
-	 */
-	IMX_TCTL(TIMER_BASE) = 0;
-	IMX_TPRER(TIMER_BASE) = 0;
-
-	IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_TEN;
-}
-
-cycle_t imx_get_cycles(struct clocksource *cs)
-{
-	return IMX_TCN(TIMER_BASE);
-}
-
-static struct clocksource clocksource_imx = {
-	.name 		= "imx_timer1",
-	.rating		= 200,
-	.read		= imx_get_cycles,
-	.mask		= 0xFFFFFFFF,
-	.shift 		= 20,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init imx_clocksource_init(unsigned long rate)
-{
-	clocksource_imx.mult =
-		clocksource_hz2mult(rate, clocksource_imx.shift);
-	clocksource_register(&clocksource_imx);
-
-	return 0;
-}
-
-static int imx_set_next_event(unsigned long evt,
-				  struct clock_event_device *unused)
-{
-	unsigned long tcmp;
-
-	tcmp = IMX_TCN(TIMER_BASE) + evt;
-	IMX_TCMP(TIMER_BASE) = tcmp;
-
-	return (int32_t)(tcmp - IMX_TCN(TIMER_BASE)) < 0 ? -ETIME : 0;
-}
-
-#ifdef DEBUG
-static const char *clock_event_mode_label[]={
-	[CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
-	[CLOCK_EVT_MODE_ONESHOT]  = "CLOCK_EVT_MODE_ONESHOT",
-	[CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
-	[CLOCK_EVT_MODE_UNUSED]   = "CLOCK_EVT_MODE_UNUSED"
-};
-#endif /*DEBUG*/
-
-static void imx_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
-{
-	unsigned long flags;
-
-	/*
-	 * The timer interrupt generation is disabled at least
-	 * for enough time to call imx_set_next_event()
-	 */
-	local_irq_save(flags);
-	/* Disable interrupt in GPT module */
-	IMX_TCTL(TIMER_BASE) &= ~TCTL_IRQEN;
-	if (mode != clockevent_mode) {
-		/* Set event time into far-far future */
-		IMX_TCMP(TIMER_BASE) = IMX_TCN(TIMER_BASE) - 3;
-		/* Clear pending interrupt */
-		IMX_TSTAT(TIMER_BASE) &= ~TSTAT_COMP;
-	}
-
-#ifdef DEBUG
-	printk(KERN_INFO "imx_set_mode: changing mode from %s to %s\n",
-		clock_event_mode_label[clockevent_mode], clock_event_mode_label[mode]);
-#endif /*DEBUG*/
-
-	/* Remember timer mode */
-	clockevent_mode = mode;
-	local_irq_restore(flags);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		printk(KERN_ERR "imx_set_mode: Periodic mode is not supported for i.MX\n");
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/*
-		 * Do not put overhead of interrupt enable/disable into
-		 * imx_set_next_event(), the core has about 4 minutes
-		 * to call imx_set_next_event() or shutdown clock after
-		 * mode switching
-		 */
-		local_irq_save(flags);
-		IMX_TCTL(TIMER_BASE) |= TCTL_IRQEN;
-		local_irq_restore(flags);
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		/* Left event sources disabled, no more interrupts appears */
-		break;
-	}
-}
-
-static struct clock_event_device clockevent_imx = {
-	.name		= "imx_timer1",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
-	.set_mode	= imx_set_mode,
-	.set_next_event	= imx_set_next_event,
-	.rating		= 200,
-};
-
-static int __init imx_clockevent_init(unsigned long rate)
-{
-	clockevent_imx.mult = div_sc(rate, NSEC_PER_SEC,
-					clockevent_imx.shift);
-	clockevent_imx.max_delta_ns =
-		clockevent_delta2ns(0xfffffffe, &clockevent_imx);
-	clockevent_imx.min_delta_ns =
-		clockevent_delta2ns(0xf, &clockevent_imx);
-
-	clockevent_imx.cpumask = cpumask_of(0);
-
-	clockevents_register_device(&clockevent_imx);
-
-	return 0;
-}
-
-extern int imx_clocks_init(void);
-
-static void __init imx_timer_init(void)
-{
-	struct clk *clk;
-	unsigned long rate;
-
-	imx_clocks_init();
-
-	clk = clk_get(NULL, "perclk1");
-	clk_enable(clk);
-	rate = clk_get_rate(clk);
-
-	imx_timer_hardware_init();
-	imx_clocksource_init(rate);
-
-	imx_clockevent_init(rate);
-
-	/*
-	 * Make irqs happen for the system timer
-	 */
-	setup_irq(TIM1_INT, &imx_timer_irq);
-}
-
-struct sys_timer imx_timer = {
-	.init		= imx_timer_init,
-};