Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "This branch contains mostly additions and changes to platform
  enablement and SoC-level drivers.  Since there's sometimes a
  dependency on device-tree changes, there's also a fair amount of
  those in this branch.

  Pieces worth mentioning are:

   - Mbus driver for Marvell platforms, allowing kernel configuration
     and resource allocation of on-chip peripherals.
   - Enablement of the mbus infrastructure from Marvell PCI-e drivers.
   - Preparation of MSI support for Marvell platforms.
   - Addition of new PCI-e host controller driver for Tegra platforms
   - Some churn caused by sharing of macro names between i.MX 6Q and 6DL
     platforms in the device tree sources and header files.
   - Various suspend/PM updates for Tegra, including LP1 support.
   - Versatile Express support for MCPM, part of big little support.
   - Allwinner platform support for A20 and A31 SoCs (dual and quad
     Cortex-A7)
   - OMAP2+ support for DRA7, a new Cortex-A15-based SoC.

  The code that touches other architectures are patches moving MSI
  arch-specific functions over to weak symbols and removal of
  ARCH_SUPPORTS_MSI, acked by PCI maintainers"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits)
  tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE
  PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource
  ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list
  ARM: dts: vf610-twr: enable i2c0 device
  ARM: dts: i.MX51: Add one more I2C2 pinmux entry
  ARM: dts: i.MX51: Move pins configuration under "iomuxc" label
  ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog
  ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator
  ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX
  ARM: dts: i.MX27: Disable AUDMUX in the template
  ARM: dts: wandboard: Add support for SDIO bcm4329
  ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template
  ARM: dts: imx53-qsb: Make USBH1 functional
  ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module
  ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module
  ARM: dts: imx6qdl-sabresd: Add touchscreen support
  ARM: imx: add ocram clock for imx53
  ARM: dts: imx: ocram size is different between imx6q and imx6dl
  ARM: dts: imx27-phytec-phycore-som: Fix regulator settings
  ARM: dts: i.MX27: Remove clock name from CPU node
  ...

17 files changed, 450 insertions, 158 deletions

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 1303e334c34..29a8af6922a 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,6 +1,7 @@
 config ARCH_MXC
 	bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
 	select ARCH_REQUIRE_GPIOLIB
+	select ARM_CPU_SUSPEND if PM
 	select ARM_PATCH_PHYS_VIRT
 	select AUTO_ZRELADDR if !ZBOOT_ROM
 	select CLKDEV_LOOKUP
@@ -8,6 +9,7 @@ config ARCH_MXC
 	select GENERIC_ALLOCATOR
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
+	select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
 	select USE_OF
@@ -785,7 +787,6 @@ config SOC_IMX6Q
 	bool "i.MX6 Quad/DualLite support"
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
-	select ARM_CPU_SUSPEND if PM
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
 	select ARM_ERRATA_775420
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index e20f22d58fd..5383c589ad7 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -15,7 +15,8 @@ imx5-pm-$(CONFIG_PM) += pm-imx5.o
 obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y)
 
 obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
-			    clk-pfd.o clk-busy.o clk.o
+			    clk-pfd.o clk-busy.o clk.o \
+			    clk-fixup-div.o clk-fixup-mux.o
 
 obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
index 0cfa07dd9aa..ad3b755abb7 100644
--- a/arch/arm/mach-imx/anatop.c
+++ b/arch/arm/mach-imx/anatop.c
@@ -66,7 +66,7 @@ void imx_anatop_post_resume(void)
 	imx_anatop_enable_weak2p5(false);
 }
 
-void imx_anatop_usb_chrg_detect_disable(void)
+static void imx_anatop_usb_chrg_detect_disable(void)
 {
 	regmap_write(anatop, ANADIG_USB1_CHRG_DETECT,
 		BM_ANADIG_USB_CHRG_DETECT_EN_B
@@ -100,4 +100,6 @@ void __init imx_anatop_init(void)
 		pr_err("%s: failed to find imx6q-anatop regmap!\n", __func__);
 		return;
 	}
+
+	imx_anatop_usb_chrg_detect_disable();
 }
diff --git a/arch/arm/mach-imx/clk-fixup-div.c b/arch/arm/mach-imx/clk-fixup-div.c
new file mode 100644
index 00000000000..21db020b1f2
--- /dev/null
+++ b/arch/arm/mach-imx/clk-fixup-div.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+#define to_clk_div(_hw) container_of(_hw, struct clk_divider, hw)
+#define div_mask(d)	((1 << (d->width)) - 1)
+
+/**
+ * struct clk_fixup_div - imx integer fixup divider clock
+ * @divider: the parent class
+ * @ops: pointer to clk_ops of parent class
+ * @fixup: a hook to fixup the write value
+ *
+ * The imx fixup divider clock is a subclass of basic clk_divider
+ * with an addtional fixup hook.
+ */
+struct clk_fixup_div {
+	struct clk_divider divider;
+	const struct clk_ops *ops;
+	void (*fixup)(u32 *val);
+};
+
+static inline struct clk_fixup_div *to_clk_fixup_div(struct clk_hw *hw)
+{
+	struct clk_divider *divider = to_clk_div(hw);
+
+	return container_of(divider, struct clk_fixup_div, divider);
+}
+
+static unsigned long clk_fixup_div_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw);
+
+	return fixup_div->ops->recalc_rate(&fixup_div->divider.hw, parent_rate);
+}
+
+static long clk_fixup_div_round_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long *prate)
+{
+	struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw);
+
+	return fixup_div->ops->round_rate(&fixup_div->divider.hw, rate, prate);
+}
+
+static int clk_fixup_div_set_rate(struct clk_hw *hw, unsigned long rate,
+			    unsigned long parent_rate)
+{
+	struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw);
+	struct clk_divider *div = to_clk_div(hw);
+	unsigned int divider, value;
+	unsigned long flags = 0;
+	u32 val;
+
+	divider = parent_rate / rate;
+
+	/* Zero based divider */
+	value = divider - 1;
+
+	if (value > div_mask(div))
+		value = div_mask(div);
+
+	spin_lock_irqsave(div->lock, flags);
+
+	val = readl(div->reg);
+	val &= ~(div_mask(div) << div->shift);
+	val |= value << div->shift;
+	fixup_div->fixup(&val);
+	writel(val, div->reg);
+
+	spin_unlock_irqrestore(div->lock, flags);
+
+	return 0;
+}
+
+static const struct clk_ops clk_fixup_div_ops = {
+	.recalc_rate = clk_fixup_div_recalc_rate,
+	.round_rate = clk_fixup_div_round_rate,
+	.set_rate = clk_fixup_div_set_rate,
+};
+
+struct clk *imx_clk_fixup_divider(const char *name, const char *parent,
+				  void __iomem *reg, u8 shift, u8 width,
+				  void (*fixup)(u32 *val))
+{
+	struct clk_fixup_div *fixup_div;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	if (!fixup)
+		return ERR_PTR(-EINVAL);
+
+	fixup_div = kzalloc(sizeof(*fixup_div), GFP_KERNEL);
+	if (!fixup_div)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_fixup_div_ops;
+	init.flags = CLK_SET_RATE_PARENT;
+	init.parent_names = parent ? &parent : NULL;
+	init.num_parents = parent ? 1 : 0;
+
+	fixup_div->divider.reg = reg;
+	fixup_div->divider.shift = shift;
+	fixup_div->divider.width = width;
+	fixup_div->divider.lock = &imx_ccm_lock;
+	fixup_div->divider.hw.init = &init;
+	fixup_div->ops = &clk_divider_ops;
+	fixup_div->fixup = fixup;
+
+	clk = clk_register(NULL, &fixup_div->divider.hw);
+	if (IS_ERR(clk))
+		kfree(fixup_div);
+
+	return clk;
+}
diff --git a/arch/arm/mach-imx/clk-fixup-mux.c b/arch/arm/mach-imx/clk-fixup-mux.c
new file mode 100644
index 00000000000..deb4b8093b3
--- /dev/null
+++ b/arch/arm/mach-imx/clk-fixup-mux.c
@@ -0,0 +1,107 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "clk.h"
+
+#define to_clk_mux(_hw) container_of(_hw, struct clk_mux, hw)
+
+/**
+ * struct clk_fixup_mux - imx integer fixup multiplexer clock
+ * @mux: the parent class
+ * @ops: pointer to clk_ops of parent class
+ * @fixup: a hook to fixup the write value
+ *
+ * The imx fixup multiplexer clock is a subclass of basic clk_mux
+ * with an addtional fixup hook.
+ */
+struct clk_fixup_mux {
+	struct clk_mux mux;
+	const struct clk_ops *ops;
+	void (*fixup)(u32 *val);
+};
+
+static inline struct clk_fixup_mux *to_clk_fixup_mux(struct clk_hw *hw)
+{
+	struct clk_mux *mux = to_clk_mux(hw);
+
+	return container_of(mux, struct clk_fixup_mux, mux);
+}
+
+static u8 clk_fixup_mux_get_parent(struct clk_hw *hw)
+{
+	struct clk_fixup_mux *fixup_mux = to_clk_fixup_mux(hw);
+
+	return fixup_mux->ops->get_parent(&fixup_mux->mux.hw);
+}
+
+static int clk_fixup_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_fixup_mux *fixup_mux = to_clk_fixup_mux(hw);
+	struct clk_mux *mux = to_clk_mux(hw);
+	unsigned long flags = 0;
+	u32 val;
+
+	spin_lock_irqsave(mux->lock, flags);
+
+	val = readl(mux->reg);
+	val &= ~(mux->mask << mux->shift);
+	val |= index << mux->shift;
+	fixup_mux->fixup(&val);
+	writel(val, mux->reg);
+
+	spin_unlock_irqrestore(mux->lock, flags);
+
+	return 0;
+}
+
+static const struct clk_ops clk_fixup_mux_ops = {
+	.get_parent = clk_fixup_mux_get_parent,
+	.set_parent = clk_fixup_mux_set_parent,
+};
+
+struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg,
+			      u8 shift, u8 width, const char **parents,
+			      int num_parents, void (*fixup)(u32 *val))
+{
+	struct clk_fixup_mux *fixup_mux;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	if (!fixup)
+		return ERR_PTR(-EINVAL);
+
+	fixup_mux = kzalloc(sizeof(*fixup_mux), GFP_KERNEL);
+	if (!fixup_mux)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_fixup_mux_ops;
+	init.parent_names = parents;
+	init.num_parents = num_parents;
+
+	fixup_mux->mux.reg = reg;
+	fixup_mux->mux.shift = shift;
+	fixup_mux->mux.mask = BIT(width) - 1;
+	fixup_mux->mux.lock = &imx_ccm_lock;
+	fixup_mux->mux.hw.init = &init;
+	fixup_mux->ops = &clk_mux_ops;
+	fixup_mux->fixup = fixup;
+
+	clk = clk_register(NULL, &fixup_mux->mux.hw);
+	if (IS_ERR(clk))
+		kfree(fixup_mux);
+
+	return clk;
+}
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 9afac26fa1c..1a56a331999 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -119,7 +119,7 @@ enum imx5_clks {
 	srtc_gate, pata_gate, sata_gate, spdif_xtal_sel, spdif0_sel,
 	spdif1_sel, spdif0_pred, spdif0_podf, spdif1_pred, spdif1_podf,
 	spdif0_com_s, spdif1_com_sel, spdif0_gate, spdif1_gate, spdif_ipg_gate,
-	clk_max
+	ocram, clk_max
 };
 
 static struct clk *clk[clk_max];
@@ -506,6 +506,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 				mx53_can_sel, ARRAY_SIZE(mx53_can_sel));
 	clk[can1_serial_gate] = imx_clk_gate2("can1_serial_gate", "can_sel", MXC_CCM_CCGR6, 22);
 	clk[can1_ipg_gate] = imx_clk_gate2("can1_ipg_gate", "ipg", MXC_CCM_CCGR6, 20);
+	clk[ocram] = imx_clk_gate2("ocram", "ahb", MXC_CCM_CCGR6, 2);
 	clk[can2_serial_gate] = imx_clk_gate2("can2_serial_gate", "can_sel", MXC_CCM_CCGR4, 8);
 	clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 6);
 	clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22);
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 86567d980b0..9181a241d3a 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -206,6 +206,17 @@ static const char *vpu_axi_sels[]	= { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m",
 static const char *cko1_sels[]	= { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
 				    "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
 				    "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_post_div", };
+static const char *cko2_sels[] = {
+	"mmdc_ch0_axi", "mmdc_ch1_axi", "usdhc4", "usdhc1",
+	"gpu2d_axi", "dummy", "ecspi_root", "gpu3d_axi",
+	"usdhc3", "dummy", "arm", "ipu1",
+	"ipu2", "vdo_axi", "osc", "gpu2d_core",
+	"gpu3d_core", "usdhc2", "ssi1", "ssi2",
+	"ssi3", "gpu3d_shader", "vpu_axi", "can_root",
+	"ldb_di0", "ldb_di1", "esai", "eim_slow",
+	"uart_serial", "spdif", "asrc", "hsi_tx",
+};
+static const char *cko_sels[] = { "cko1", "cko2", };
 
 enum mx6q_clks {
 	dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
@@ -239,7 +250,8 @@ enum mx6q_clks {
 	pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg,
 	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
 	sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
-	usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow, clk_max
+	usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow,
+	spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, clk_max
 };
 
 static struct clk *clk[clk_max];
@@ -276,6 +288,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	struct device_node *np;
 	void __iomem *base;
 	int i, irq;
+	int ret;
 
 	clk[dummy] = imx_clk_fixed("dummy", 0);
 	clk[ckil] = imx_obtain_fixed_clock("ckil", 0);
@@ -384,19 +397,21 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[ipu2_di1_sel]     = imx_clk_mux("ipu2_di1_sel",     base + 0x38, 9,  3, ipu2_di1_sels,     ARRAY_SIZE(ipu2_di1_sels));
 	clk[hsi_tx_sel]       = imx_clk_mux("hsi_tx_sel",       base + 0x30, 28, 1, hsi_tx_sels,       ARRAY_SIZE(hsi_tx_sels));
 	clk[pcie_axi_sel]     = imx_clk_mux("pcie_axi_sel",     base + 0x18, 10, 1, pcie_axi_sels,     ARRAY_SIZE(pcie_axi_sels));
-	clk[ssi1_sel]         = imx_clk_mux("ssi1_sel",         base + 0x1c, 10, 2, ssi_sels,          ARRAY_SIZE(ssi_sels));
-	clk[ssi2_sel]         = imx_clk_mux("ssi2_sel",         base + 0x1c, 12, 2, ssi_sels,          ARRAY_SIZE(ssi_sels));
-	clk[ssi3_sel]         = imx_clk_mux("ssi3_sel",         base + 0x1c, 14, 2, ssi_sels,          ARRAY_SIZE(ssi_sels));
-	clk[usdhc1_sel]       = imx_clk_mux("usdhc1_sel",       base + 0x1c, 16, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
-	clk[usdhc2_sel]       = imx_clk_mux("usdhc2_sel",       base + 0x1c, 17, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
-	clk[usdhc3_sel]       = imx_clk_mux("usdhc3_sel",       base + 0x1c, 18, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
-	clk[usdhc4_sel]       = imx_clk_mux("usdhc4_sel",       base + 0x1c, 19, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
+	clk[ssi1_sel]         = imx_clk_fixup_mux("ssi1_sel",   base + 0x1c, 10, 2, ssi_sels,          ARRAY_SIZE(ssi_sels),          imx_cscmr1_fixup);
+	clk[ssi2_sel]         = imx_clk_fixup_mux("ssi2_sel",   base + 0x1c, 12, 2, ssi_sels,          ARRAY_SIZE(ssi_sels),          imx_cscmr1_fixup);
+	clk[ssi3_sel]         = imx_clk_fixup_mux("ssi3_sel",   base + 0x1c, 14, 2, ssi_sels,          ARRAY_SIZE(ssi_sels),          imx_cscmr1_fixup);
+	clk[usdhc1_sel]       = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),        imx_cscmr1_fixup);
+	clk[usdhc2_sel]       = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),        imx_cscmr1_fixup);
+	clk[usdhc3_sel]       = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),        imx_cscmr1_fixup);
+	clk[usdhc4_sel]       = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),        imx_cscmr1_fixup);
 	clk[enfc_sel]         = imx_clk_mux("enfc_sel",         base + 0x2c, 16, 2, enfc_sels,         ARRAY_SIZE(enfc_sels));
-	clk[emi_sel]          = imx_clk_mux("emi_sel",          base + 0x1c, 27, 2, emi_sels,          ARRAY_SIZE(emi_sels));
-	clk[emi_slow_sel]     = imx_clk_mux("emi_slow_sel",     base + 0x1c, 29, 2, emi_slow_sels,     ARRAY_SIZE(emi_slow_sels));
+	clk[emi_sel]          = imx_clk_fixup_mux("emi_sel",      base + 0x1c, 27, 2, emi_sels,        ARRAY_SIZE(emi_sels),          imx_cscmr1_fixup);
+	clk[emi_slow_sel]     = imx_clk_fixup_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_slow_sels,   ARRAY_SIZE(emi_slow_sels),     imx_cscmr1_fixup);
 	clk[vdo_axi_sel]      = imx_clk_mux("vdo_axi_sel",      base + 0x18, 11, 1, vdo_axi_sels,      ARRAY_SIZE(vdo_axi_sels));
 	clk[vpu_axi_sel]      = imx_clk_mux("vpu_axi_sel",      base + 0x18, 14, 2, vpu_axi_sels,      ARRAY_SIZE(vpu_axi_sels));
 	clk[cko1_sel]         = imx_clk_mux("cko1_sel",         base + 0x60, 0,  4, cko1_sels,         ARRAY_SIZE(cko1_sels));
+	clk[cko2_sel]         = imx_clk_mux("cko2_sel",         base + 0x60, 16, 5, cko2_sels,         ARRAY_SIZE(cko2_sels));
+	clk[cko]              = imx_clk_mux("cko",              base + 0x60, 8, 1,  cko_sels,          ARRAY_SIZE(cko_sels));
 
 	/*                              name         reg      shift width busy: reg, shift parent_names  num_parents */
 	clk[periph]  = imx_clk_busy_mux("periph",  base + 0x14, 25,  1,   base + 0x48, 5,  periph_sels,  ARRAY_SIZE(periph_sels));
@@ -406,7 +421,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[periph_clk2]      = imx_clk_divider("periph_clk2",      "periph_clk2_sel",   base + 0x14, 27, 3);
 	clk[periph2_clk2]     = imx_clk_divider("periph2_clk2",     "periph2_clk2_sel",  base + 0x14, 0,  3);
 	clk[ipg]              = imx_clk_divider("ipg",              "ahb",               base + 0x14, 8,  2);
-	clk[ipg_per]          = imx_clk_divider("ipg_per",          "ipg",               base + 0x1c, 0,  6);
+	clk[ipg_per]          = imx_clk_fixup_divider("ipg_per",    "ipg",               base + 0x1c, 0,  6, imx_cscmr1_fixup);
 	clk[esai_pred]        = imx_clk_divider("esai_pred",        "esai_sel",          base + 0x28, 9,  3);
 	clk[esai_podf]        = imx_clk_divider("esai_podf",        "esai_pred",         base + 0x28, 25, 3);
 	clk[asrc_pred]        = imx_clk_divider("asrc_pred",        "asrc_sel",          base + 0x30, 12, 3);
@@ -442,10 +457,11 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[usdhc4_podf]      = imx_clk_divider("usdhc4_podf",      "usdhc4_sel",        base + 0x24, 22, 3);
 	clk[enfc_pred]        = imx_clk_divider("enfc_pred",        "enfc_sel",          base + 0x2c, 18, 3);
 	clk[enfc_podf]        = imx_clk_divider("enfc_podf",        "enfc_pred",         base + 0x2c, 21, 6);
-	clk[emi_podf]         = imx_clk_divider("emi_podf",         "emi_sel",           base + 0x1c, 20, 3);
-	clk[emi_slow_podf]    = imx_clk_divider("emi_slow_podf",    "emi_slow_sel",      base + 0x1c, 23, 3);
+	clk[emi_podf]         = imx_clk_fixup_divider("emi_podf",   "emi_sel",           base + 0x1c, 20, 3, imx_cscmr1_fixup);
+	clk[emi_slow_podf]    = imx_clk_fixup_divider("emi_slow_podf", "emi_slow_sel",   base + 0x1c, 23, 3, imx_cscmr1_fixup);
 	clk[vpu_axi_podf]     = imx_clk_divider("vpu_axi_podf",     "vpu_axi_sel",       base + 0x24, 25, 3);
 	clk[cko1_podf]        = imx_clk_divider("cko1_podf",        "cko1_sel",          base + 0x60, 4,  3);
+	clk[cko2_podf]        = imx_clk_divider("cko2_podf",        "cko2_sel",          base + 0x60, 21, 3);
 
 	/*                                            name                 parent_name    reg        shift width busy: reg, shift */
 	clk[axi]               = imx_clk_busy_divider("axi",               "axi_sel",     base + 0x14, 16,  3,   base + 0x48, 0);
@@ -486,6 +502,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[i2c3]         = imx_clk_gate2("i2c3",          "ipg_per",           base + 0x70, 10);
 	clk[iim]          = imx_clk_gate2("iim",           "ipg",               base + 0x70, 12);
 	clk[enfc]         = imx_clk_gate2("enfc",          "enfc_podf",         base + 0x70, 14);
+	clk[vdoa]         = imx_clk_gate2("vdoa",          "vdo_axi",           base + 0x70, 26);
 	clk[ipu1]         = imx_clk_gate2("ipu1",          "ipu1_podf",         base + 0x74, 0);
 	clk[ipu1_di0]     = imx_clk_gate2("ipu1_di0",      "ipu1_di0_sel",      base + 0x74, 2);
 	clk[ipu1_di1]     = imx_clk_gate2("ipu1_di1",      "ipu1_di1_sel",      base + 0x74, 4);
@@ -521,6 +538,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[sata]         = imx_clk_gate2("sata",          "ipg",               base + 0x7c, 4);
 	clk[sdma]         = imx_clk_gate2("sdma",          "ahb",               base + 0x7c, 6);
 	clk[spba]         = imx_clk_gate2("spba",          "ipg",               base + 0x7c, 12);
+	clk[spdif]        = imx_clk_gate2("spdif",         "spdif_podf",    	base + 0x7c, 14);
 	clk[ssi1_ipg]     = imx_clk_gate2("ssi1_ipg",      "ipg",               base + 0x7c, 18);
 	clk[ssi2_ipg]     = imx_clk_gate2("ssi2_ipg",      "ipg",               base + 0x7c, 20);
 	clk[ssi3_ipg]     = imx_clk_gate2("ssi3_ipg",      "ipg",               base + 0x7c, 22);
@@ -535,6 +553,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[vdo_axi]      = imx_clk_gate2("vdo_axi",       "vdo_axi_sel",       base + 0x80, 12);
 	clk[vpu_axi]      = imx_clk_gate2("vpu_axi",       "vpu_axi_podf",      base + 0x80, 14);
 	clk[cko1]         = imx_clk_gate("cko1",           "cko1_podf",         base + 0x60, 7);
+	clk[cko2]         = imx_clk_gate("cko2",           "cko2_podf",         base + 0x60, 24);
 
 	for (i = 0; i < ARRAY_SIZE(clk); i++)
 		if (IS_ERR(clk[i]))
@@ -554,7 +573,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk_register_clkdev(clk[pll4_post_div], "pll4_post_div", NULL);
 	clk_register_clkdev(clk[pll4_audio], "pll4_audio", NULL);
 
-	if (imx6q_revision() != IMX_CHIP_REVISION_1_0) {
+	if ((imx6q_revision() != IMX_CHIP_REVISION_1_0) || cpu_is_imx6dl()) {
 		clk_set_parent(clk[ldb_di0_sel], clk[pll5_video_div]);
 		clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]);
 	}
@@ -574,6 +593,16 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 		clk_prepare_enable(clk[usbphy2_gate]);
 	}
 
+	/*
+	 * Let's initially set up CLKO with OSC24M, since this configuration
+	 * is widely used by imx6q board designs to clock audio codec.
+	 */
+	ret = clk_set_parent(clk[cko2_sel], clk[osc]);
+	if (!ret)
+		ret = clk_set_parent(clk[cko], clk[cko2]);
+	if (ret)
+		pr_warn("failed to set up CLKO: %d\n", ret);
+
 	/* Set initial power mode */
 	imx6q_set_lpm(WAIT_CLOCKED);
 
diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c
index a307ac22dff..a5c3c5d21ae 100644
--- a/arch/arm/mach-imx/clk-imx6sl.c
+++ b/arch/arm/mach-imx/clk-imx6sl.c
@@ -138,14 +138,14 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	clks[IMX6SL_CLK_PERIPH_CLK2_SEL]  = imx_clk_mux("periph_clk2_sel",  base + 0x18, 12, 2, periph_clk2_sels,  ARRAY_SIZE(periph_clk2_sels));
 	clks[IMX6SL_CLK_CSI_SEL]          = imx_clk_mux("csi_sel",          base + 0x3c, 9,  2, csi_lcdif_sels,    ARRAY_SIZE(csi_lcdif_sels));
 	clks[IMX6SL_CLK_LCDIF_AXI_SEL]    = imx_clk_mux("lcdif_axi_sel",    base + 0x3c, 14, 2, csi_lcdif_sels,    ARRAY_SIZE(csi_lcdif_sels));
-	clks[IMX6SL_CLK_USDHC1_SEL]       = imx_clk_mux("usdhc1_sel",       base + 0x1c, 16, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
-	clks[IMX6SL_CLK_USDHC2_SEL]       = imx_clk_mux("usdhc2_sel",       base + 0x1c, 17, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
-	clks[IMX6SL_CLK_USDHC3_SEL]       = imx_clk_mux("usdhc3_sel",       base + 0x1c, 18, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
-	clks[IMX6SL_CLK_USDHC4_SEL]       = imx_clk_mux("usdhc4_sel",       base + 0x1c, 19, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels));
-	clks[IMX6SL_CLK_SSI1_SEL]         = imx_clk_mux("ssi1_sel",         base + 0x1c, 10, 2, ssi_sels,          ARRAY_SIZE(ssi_sels));
-	clks[IMX6SL_CLK_SSI2_SEL]         = imx_clk_mux("ssi2_sel",         base + 0x1c, 12, 2, ssi_sels,          ARRAY_SIZE(ssi_sels));
-	clks[IMX6SL_CLK_SSI3_SEL]         = imx_clk_mux("ssi3_sel",         base + 0x1c, 14, 2, ssi_sels,          ARRAY_SIZE(ssi_sels));
-	clks[IMX6SL_CLK_PERCLK_SEL]       = imx_clk_mux("perclk_sel",       base + 0x1c, 6,  1, perclk_sels,       ARRAY_SIZE(perclk_sels));
+	clks[IMX6SL_CLK_USDHC1_SEL]       = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),  imx_cscmr1_fixup);
+	clks[IMX6SL_CLK_USDHC2_SEL]       = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),  imx_cscmr1_fixup);
+	clks[IMX6SL_CLK_USDHC3_SEL]       = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),  imx_cscmr1_fixup);
+	clks[IMX6SL_CLK_USDHC4_SEL]       = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels,        ARRAY_SIZE(usdhc_sels),  imx_cscmr1_fixup);
+	clks[IMX6SL_CLK_SSI1_SEL]         = imx_clk_fixup_mux("ssi1_sel",   base + 0x1c, 10, 2, ssi_sels,          ARRAY_SIZE(ssi_sels),    imx_cscmr1_fixup);
+	clks[IMX6SL_CLK_SSI2_SEL]         = imx_clk_fixup_mux("ssi2_sel",   base + 0x1c, 12, 2, ssi_sels,          ARRAY_SIZE(ssi_sels),    imx_cscmr1_fixup);
+	clks[IMX6SL_CLK_SSI3_SEL]         = imx_clk_fixup_mux("ssi3_sel",   base + 0x1c, 14, 2, ssi_sels,          ARRAY_SIZE(ssi_sels),    imx_cscmr1_fixup);
+	clks[IMX6SL_CLK_PERCLK_SEL]       = imx_clk_fixup_mux("perclk_sel", base + 0x1c, 6,  1, perclk_sels,       ARRAY_SIZE(perclk_sels), imx_cscmr1_fixup);
 	clks[IMX6SL_CLK_PXP_AXI_SEL]      = imx_clk_mux("pxp_axi_sel",      base + 0x34, 6,  3, epdc_pxp_sels,     ARRAY_SIZE(epdc_pxp_sels));
 	clks[IMX6SL_CLK_EPDC_AXI_SEL]     = imx_clk_mux("epdc_axi_sel",     base + 0x34, 15, 3, epdc_pxp_sels,     ARRAY_SIZE(epdc_pxp_sels));
 	clks[IMX6SL_CLK_GPU2D_OVG_SEL]    = imx_clk_mux("gpu2d_ovg_sel",    base + 0x18, 4,  2, gpu2d_ovg_sels,    ARRAY_SIZE(gpu2d_ovg_sels));
@@ -179,14 +179,14 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	clks[IMX6SL_CLK_SSI2_PODF]         = imx_clk_divider("ssi2_podf",         "ssi2_pred",         base + 0x2c, 0,  6);
 	clks[IMX6SL_CLK_SSI3_PRED]         = imx_clk_divider("ssi3_pred",         "ssi3_sel",          base + 0x28, 22, 3);
 	clks[IMX6SL_CLK_SSI3_PODF]         = imx_clk_divider("ssi3_podf",         "ssi3_pred",         base + 0x28, 16, 6);
-	clks[IMX6SL_CLK_PERCLK]            = imx_clk_divider("perclk",            "perclk_sel",        base + 0x1c, 0,  6);
+	clks[IMX6SL_CLK_PERCLK]            = imx_clk_fixup_divider("perclk",      "perclk_sel",        base + 0x1c, 0,  6, imx_cscmr1_fixup);
 	clks[IMX6SL_CLK_PXP_AXI_PODF]      = imx_clk_divider("pxp_axi_podf",      "pxp_axi_sel",       base + 0x34, 3,  3);
 	clks[IMX6SL_CLK_EPDC_AXI_PODF]     = imx_clk_divider("epdc_axi_podf",     "epdc_axi_sel",      base + 0x34, 12, 3);
 	clks[IMX6SL_CLK_GPU2D_OVG_PODF]    = imx_clk_divider("gpu2d_ovg_podf",    "gpu2d_ovg_sel",     base + 0x18, 26, 3);
 	clks[IMX6SL_CLK_GPU2D_PODF]        = imx_clk_divider("gpu2d_podf",        "gpu2d_sel",         base + 0x18, 29, 3);
 	clks[IMX6SL_CLK_LCDIF_PIX_PRED]    = imx_clk_divider("lcdif_pix_pred",    "lcdif_pix_sel",     base + 0x38, 3,  3);
 	clks[IMX6SL_CLK_EPDC_PIX_PRED]     = imx_clk_divider("epdc_pix_pred",     "epdc_pix_sel",      base + 0x38, 12, 3);
-	clks[IMX6SL_CLK_LCDIF_PIX_PODF]    = imx_clk_divider("lcdif_pix_podf",    "lcdif_pix_pred",    base + 0x1c, 20, 3);
+	clks[IMX6SL_CLK_LCDIF_PIX_PODF]    = imx_clk_fixup_divider("lcdif_pix_podf", "lcdif_pix_pred", base + 0x1c, 20, 3, imx_cscmr1_fixup);
 	clks[IMX6SL_CLK_EPDC_PIX_PODF]     = imx_clk_divider("epdc_pix_podf",     "epdc_pix_pred",     base + 0x18, 23, 3);
 	clks[IMX6SL_CLK_SPDIF0_PRED]       = imx_clk_divider("spdif0_pred",       "spdif0_sel",        base + 0x30, 25, 3);
 	clks[IMX6SL_CLK_SPDIF0_PODF]       = imx_clk_divider("spdif0_podf",       "spdif0_pred",       base + 0x30, 22, 3);
diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c
index a9fad5f8d34..f6640b6a7b3 100644
--- a/arch/arm/mach-imx/clk-pllv3.c
+++ b/arch/arm/mach-imx/clk-pllv3.c
@@ -48,7 +48,7 @@ struct clk_pllv3 {
 static int clk_pllv3_prepare(struct clk_hw *hw)
 {
 	struct clk_pllv3 *pll = to_clk_pllv3(hw);
-	unsigned long timeout = jiffies + msecs_to_jiffies(10);
+	unsigned long timeout;
 	u32 val;
 
 	val = readl_relaxed(pll->base);
@@ -59,12 +59,19 @@ static int clk_pllv3_prepare(struct clk_hw *hw)
 		val &= ~BM_PLL_POWER;
 	writel_relaxed(val, pll->base);
 
+	timeout = jiffies + msecs_to_jiffies(10);
 	/* Wait for PLL to lock */
-	while (!(readl_relaxed(pll->base) & BM_PLL_LOCK))
+	do {
+		if (readl_relaxed(pll->base) & BM_PLL_LOCK)
+			break;
 		if (time_after(jiffies, timeout))
-			return -ETIMEDOUT;
+			break;
+	} while (1);
 
-	return 0;
+	if (readl_relaxed(pll->base) & BM_PLL_LOCK)
+		return 0;
+	else
+		return -ETIMEDOUT;
 }
 
 static void clk_pllv3_unprepare(struct clk_hw *hw)
diff --git a/arch/arm/mach-imx/clk.c b/arch/arm/mach-imx/clk.c
index 55bc80a0066..edc35df7bed 100644
--- a/arch/arm/mach-imx/clk.c
+++ b/arch/arm/mach-imx/clk.c
@@ -37,3 +37,29 @@ struct clk * __init imx_obtain_fixed_clock(
 		clk = imx_clk_fixed(name, rate);
 	return clk;
 }
+
+/*
+ * This fixups the register CCM_CSCMR1 write value.
+ * The write/read/divider values of the aclk_podf field
+ * of that register have the relationship described by
+ * the following table:
+ *
+ * write value       read value        divider
+ * 3b'000            3b'110            7
+ * 3b'001            3b'111            8
+ * 3b'010            3b'100            5
+ * 3b'011            3b'101            6
+ * 3b'100            3b'010            3
+ * 3b'101            3b'011            4
+ * 3b'110            3b'000            1
+ * 3b'111            3b'001            2(default)
+ *
+ * That's why we do the xor operation below.
+ */
+#define CSCMR1_FIXUP	0x00600000
+
+void imx_cscmr1_fixup(u32 *val)
+{
+	*val ^= CSCMR1_FIXUP;
+	return;
+}
diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h
index 0e4e8bb261b..3451f1f8ba1 100644
--- a/arch/arm/mach-imx/clk.h
+++ b/arch/arm/mach-imx/clk.h
@@ -6,6 +6,8 @@
 
 extern spinlock_t imx_ccm_lock;
 
+extern void imx_cscmr1_fixup(u32 *val);
+
 struct clk *imx_clk_pllv1(const char *name, const char *parent,
 		void __iomem *base);
 
@@ -49,6 +51,14 @@ struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
 			     u8 width, void __iomem *busy_reg, u8 busy_shift,
 			     const char **parent_names, int num_parents);
 
+struct clk *imx_clk_fixup_divider(const char *name, const char *parent,
+				  void __iomem *reg, u8 shift, u8 width,
+				  void (*fixup)(u32 *val));
+
+struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg,
+			      u8 shift, u8 width, const char **parents,
+			      int num_parents, void (*fixup)(u32 *val));
+
 static inline struct clk *imx_clk_fixed(const char *name, int rate)
 {
 	return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index cb6c838b63e..4517fd760bf 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -137,7 +137,6 @@ extern void imx_gpc_restore_all(void);
 extern void imx_anatop_init(void);
 extern void imx_anatop_pre_suspend(void);
 extern void imx_anatop_post_resume(void);
-extern void imx_anatop_usb_chrg_detect_disable(void);
 extern u32 imx_anatop_get_digprog(void);
 extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
 extern void imx6q_set_chicken_bit(void);
@@ -147,12 +146,10 @@ extern int imx_cpu_kill(unsigned int cpu);
 
 #ifdef CONFIG_PM
 extern void imx6q_pm_init(void);
-extern void imx51_pm_init(void);
-extern void imx53_pm_init(void);
+extern void imx5_pm_init(void);
 #else
 static inline void imx6q_pm_init(void) {}
-static inline void imx51_pm_init(void) {}
-static inline void imx53_pm_init(void) {}
+static inline void imx5_pm_init(void) {}
 #endif
 
 #ifdef CONFIG_NEON
@@ -161,6 +158,12 @@ extern int mx51_neon_fixup(void);
 static inline int mx51_neon_fixup(void) { return 0; }
 #endif
 
+#ifdef CONFIG_CACHE_L2X0
+extern void imx_init_l2cache(void);
+#else
+static inline void imx_init_l2cache(void) {}
+#endif
+
 extern struct smp_operations imx_smp_ops;
 
 #endif
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index a02f275a198..85a1b51346c 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -31,7 +31,7 @@
 #include <linux/regmap.h>
 #include <linux/micrel_phy.h>
 #include <linux/mfd/syscon.h>
-#include <asm/hardware/cache-l2x0.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/system_misc.h>
@@ -103,87 +103,77 @@ static int ksz9021rn_phy_fixup(struct phy_device *phydev)
 {
 	if (IS_BUILTIN(CONFIG_PHYLIB)) {
 		/* min rx data delay */
-		phy_write(phydev, 0x0b, 0x8105);
-		phy_write(phydev, 0x0c, 0x0000);
+		phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
+			0x8000 | MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW);
+		phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0x0000);
 
 		/* max rx/tx clock delay, min rx/tx control delay */
-		phy_write(phydev, 0x0b, 0x8104);
-		phy_write(phydev, 0x0c, 0xf0f0);
-		phy_write(phydev, 0x0b, 0x104);
+		phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
+			0x8000 | MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW);
+		phy_write(phydev, MICREL_KSZ9021_EXTREG_DATA_WRITE, 0xf0f0);
+		phy_write(phydev, MICREL_KSZ9021_EXTREG_CTRL,
+			MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW);
 	}
 
 	return 0;
 }
 
-static void __init imx6q_sabrelite_cko1_setup(void)
+static void mmd_write_reg(struct phy_device *dev, int device, int reg, int val)
 {
-	struct clk *cko1_sel, *ahb, *cko1;
-	unsigned long rate;
-
-	cko1_sel = clk_get_sys(NULL, "cko1_sel");
-	ahb = clk_get_sys(NULL, "ahb");
-	cko1 = clk_get_sys(NULL, "cko1");
-	if (IS_ERR(cko1_sel) || IS_ERR(ahb) || IS_ERR(cko1)) {
-		pr_err("cko1 setup failed!\n");
-		goto put_clk;
-	}
-	clk_set_parent(cko1_sel, ahb);
-	rate = clk_round_rate(cko1, 16000000);
-	clk_set_rate(cko1, rate);
-put_clk:
-	if (!IS_ERR(cko1_sel))
-		clk_put(cko1_sel);
-	if (!IS_ERR(ahb))
-		clk_put(ahb);
-	if (!IS_ERR(cko1))
-		clk_put(cko1);
+	phy_write(dev, 0x0d, device);
+	phy_write(dev, 0x0e, reg);
+	phy_write(dev, 0x0d, (1 << 14) | device);
+	phy_write(dev, 0x0e, val);
 }
 
-static void __init imx6q_sabrelite_init(void)
+static int ksz9031rn_phy_fixup(struct phy_device *dev)
 {
-	if (IS_BUILTIN(CONFIG_PHYLIB))
-		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
-				ksz9021rn_phy_fixup);
-	imx6q_sabrelite_cko1_setup();
+	/*
+	 * min rx data delay, max rx/tx clock delay,
+	 * min rx/tx control delay
+	 */
+	mmd_write_reg(dev, 2, 4, 0);
+	mmd_write_reg(dev, 2, 5, 0);
+	mmd_write_reg(dev, 2, 8, 0x003ff);
+
+	return 0;
 }
 
-static void __init imx6q_sabresd_cko1_setup(void)
+static int ar8031_phy_fixup(struct phy_device *dev)
 {
-	struct clk *cko1_sel, *pll4, *pll4_post, *cko1;
-	unsigned long rate;
-
-	cko1_sel = clk_get_sys(NULL, "cko1_sel");
-	pll4 = clk_get_sys(NULL, "pll4_audio");
-	pll4_post = clk_get_sys(NULL, "pll4_post_div");
-	cko1 = clk_get_sys(NULL, "cko1");
-	if (IS_ERR(cko1_sel) || IS_ERR(pll4)
-			|| IS_ERR(pll4_post) || IS_ERR(cko1)) {
-		pr_err("cko1 setup failed!\n");
-		goto put_clk;
-	}
-	/*
-	 * Setting pll4 at 768MHz (24MHz * 32)
-	 * So its child clock can get 24MHz easily
-	 */
-	clk_set_rate(pll4, 768000000);
-
-	clk_set_parent(cko1_sel, pll4_post);
-	rate = clk_round_rate(cko1, 24000000);
-	clk_set_rate(cko1, rate);
-put_clk:
-	if (!IS_ERR(cko1_sel))
-		clk_put(cko1_sel);
-	if (!IS_ERR(pll4_post))
-		clk_put(pll4_post);
-	if (!IS_ERR(pll4))
-		clk_put(pll4);
-	if (!IS_ERR(cko1))
-		clk_put(cko1);
+	u16 val;
+
+	/* To enable AR8031 output a 125MHz clk from CLK_25M */
+	phy_write(dev, 0xd, 0x7);
+	phy_write(dev, 0xe, 0x8016);
+	phy_write(dev, 0xd, 0x4007);
+
+	val = phy_read(dev, 0xe);
+	val &= 0xffe3;
+	val |= 0x18;
+	phy_write(dev, 0xe, val);
+
+	/* introduce tx clock delay */
+	phy_write(dev, 0x1d, 0x5);
+	val = phy_read(dev, 0x1e);
+	val |= 0x0100;
+	phy_write(dev, 0x1e, val);
+
+	return 0;
 }
 
-static void __init imx6q_sabresd_init(void)
+#define PHY_ID_AR8031	0x004dd074
+
+static void __init imx6q_enet_phy_init(void)
 {
-	imx6q_sabresd_cko1_setup();
+	if (IS_BUILTIN(CONFIG_PHYLIB)) {
+		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
+				ksz9021rn_phy_fixup);
+		phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK,
+				ksz9031rn_phy_fixup);
+		phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
+				ar8031_phy_fixup);
+	}
 }
 
 static void __init imx6q_1588_init(void)
@@ -192,29 +182,22 @@ static void __init imx6q_1588_init(void)
 
 	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
 	if (!IS_ERR(gpr))
-		regmap_update_bits(gpr, 0x4, 1 << 21, 1 << 21);
+		regmap_update_bits(gpr, IOMUXC_GPR1,
+				IMX6Q_GPR1_ENET_CLK_SEL_MASK,
+				IMX6Q_GPR1_ENET_CLK_SEL_ANATOP);
 	else
 		pr_err("failed to find fsl,imx6q-iomux-gpr regmap\n");
 
 }
-static void __init imx6q_usb_init(void)
-{
-	imx_anatop_usb_chrg_detect_disable();
-}
 
 static void __init imx6q_init_machine(void)
 {
-	if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
-		imx6q_sabrelite_init();
-	else if (of_machine_is_compatible("fsl,imx6q-sabresd") ||
-			of_machine_is_compatible("fsl,imx6dl-sabresd"))
-		imx6q_sabresd_init();
+	imx6q_enet_phy_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 
 	imx_anatop_init();
 	imx6q_pm_init();
-	imx6q_usb_init();
 	imx6q_1588_init();
 }
 
@@ -296,44 +279,10 @@ static void __init imx6q_map_io(void)
 	imx_scu_map_io();
 }
 
-#ifdef CONFIG_CACHE_L2X0
-static void __init imx6q_init_l2cache(void)
-{
-	void __iomem *l2x0_base;
-	struct device_node *np;
-	unsigned int val;
-
-	np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
-	if (!np)
-		goto out;
-
-	l2x0_base = of_iomap(np, 0);
-	if (!l2x0_base) {
-		of_node_put(np);
-		goto out;
-	}
-
-	/* Configure the L2 PREFETCH and POWER registers */
-	val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL);
-	val |= 0x70800000;
-	writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL);
-	val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN;
-	writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL);
-
-	iounmap(l2x0_base);
-	of_node_put(np);
-
-out:
-	l2x0_of_init(0, ~0UL);
-}
-#else
-static inline void imx6q_init_l2cache(void) {}
-#endif
-
 static void __init imx6q_init_irq(void)
 {
 	imx6q_init_revision();
-	imx6q_init_l2cache();
+	imx_init_l2cache();
 	imx_src_init();
 	imx_gpc_init();
 	irqchip_init();
diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c
index 132db260950..0d75dc54f71 100644
--- a/arch/arm/mach-imx/mach-imx6sl.c
+++ b/arch/arm/mach-imx/mach-imx6sl.c
@@ -11,7 +11,6 @@
 #include <linux/irqchip.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
@@ -26,7 +25,7 @@ static void __init imx6sl_init_machine(void)
 
 static void __init imx6sl_init_irq(void)
 {
-	l2x0_of_init(0, ~0UL);
+	imx_init_l2cache();
 	imx_src_init();
 	imx_gpc_init();
 	irqchip_init();
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index cf193d87274..a8229b7f10b 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -153,10 +153,10 @@ void __init imx51_soc_init(void)
 void __init imx51_init_late(void)
 {
 	mx51_neon_fixup();
-	imx51_pm_init();
+	imx5_pm_init();
 }
 
 void __init imx53_init_late(void)
 {
-	imx53_pm_init();
+	imx5_pm_init();
 }
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index 82e79c658eb..58aeaf5baaf 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -169,14 +169,9 @@ static int __init imx5_pm_common_init(void)
 	return imx5_cpuidle_init();
 }
 
-void __init imx51_pm_init(void)
+void __init imx5_pm_init(void)
 {
 	int ret = imx5_pm_common_init();
 	if (!ret)
 		suspend_set_ops(&mx5_suspend_ops);
 }
-
-void __init imx53_pm_init(void)
-{
-	imx5_pm_common_init();
-}
diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c
index 6fe81bb4d3c..64ff37ea72b 100644
--- a/arch/arm/mach-imx/system.c
+++ b/arch/arm/mach-imx/system.c
@@ -27,6 +27,7 @@
 #include <asm/system_misc.h>
 #include <asm/proc-fns.h>
 #include <asm/mach-types.h>
+#include <asm/hardware/cache-l2x0.h>
 
 #include "common.h"
 #include "hardware.h"
@@ -95,3 +96,35 @@ void __init mxc_arch_reset_init_dt(void)
 
 	clk_prepare(wdog_clk);
 }
+
+#ifdef CONFIG_CACHE_L2X0
+void __init imx_init_l2cache(void)
+{
+	void __iomem *l2x0_base;
+	struct device_node *np;
+	unsigned int val;
+
+	np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
+	if (!np)
+		goto out;
+
+	l2x0_base = of_iomap(np, 0);
+	if (!l2x0_base) {
+		of_node_put(np);
+		goto out;
+	}
+
+	/* Configure the L2 PREFETCH and POWER registers */
+	val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL);
+	val |= 0x70800000;
+	writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL);
+	val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN;
+	writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL);
+
+	iounmap(l2x0_base);
+	of_node_put(np);
+
+out:
+	l2x0_of_init(0, ~0UL);
+}
+#endif