Merge tag 'soc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC specific changes from Arnd Bergmann:
 "Lots of changes specific to one of the SoC families.  Some that stick
  out are:

   - mach-qcom gains new features, most importantly SMP support for the
     newer chips (Stephen Boyd, Rohit Vaswani)
   - mvebu gains support for three new SoCs: Armada 375, 380 and 385
     (Thomas Petazzoni and Free-electrons team)
   - SMP support for Rockchips (Heiko Stübner)
   - Lots of i.MX changes (Shawn Guo)
   - Added support for BCM5301x SoC (Hauke Mehrtens)
   - Multiplatform support for Marvell Kirkwood and Dove (Andrew Lunn
     and Sebastian Hesselbarth doing the final part of a long journey)
   - Unify davinci platforms and remove obsolete ones (Sekhar Nori, Arnd
     Bergmann)"

* tag 'soc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (126 commits)
  ARM: sunxi: Select HAVE_ARM_ARCH_TIMER
  ARM: cache-tauros2: remove ARMv6 code
  ARM: mvebu: don't select CONFIG_NEON
  ARM: davinci: fix DT booting with default defconfig
  ARM: configs: bcm_defconfig: enable bcm590xx regulator support
  ARM: davinci: remove tnetv107x support
  MAINTAINERS: Update ARM STi maintainers
  ARM: restrict BCM_KONA_UART to ARCH_BCM_MOBILE
  ARM: bcm21664: Add board support.
  ARM: sunxi: Add the new watchog compatibles to the reboot code
  ARM: enable ARM_HAS_SG_CHAIN for multiplatform
  ARM: davinci: remove da8xx_omapl_defconfig
  ARM: davinci: da8xx: fix multiple watchdog device registration
  ARM: davinci: add da8xx specific configs to davinci_all_defconfig
  ARM: davinci: enable da8xx build concurrently with older devices
  ARM: BCM5301X: workaround suppress fault
  ARM: BCM5301X: add early debugging support
  ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU
  ARM: mach-bcm: Remove GENERIC_TIME
  ARM: shmobile: APMU: Fix warnings due to improper printk formats
  ...

27 files changed, 1282 insertions, 469 deletions

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 41ffd433f70..5740296dc42 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,12 +1,15 @@
 config ARCH_MXC
 	bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_OPP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_CPU_SUSPEND if PM
 	select CLKSRC_MMIO
-	select GENERIC_ALLOCATOR
 	select GENERIC_IRQ_CHIP
 	select PINCTRL
+	select PM_OPP if PM
 	select SOC_BUS
+	select SRAM
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
@@ -116,8 +119,8 @@ config SOC_IMX35
 	select ARCH_MXC_IOMUX_V3
 	select HAVE_EPIT
 	select MXC_AVIC
+	select PINCTRL_IMX35
 	select SMP_ON_UP if SMP
-	select PINCTRL
 
 config SOC_IMX5
 	bool
@@ -768,53 +771,43 @@ config	SOC_IMX50
 config	SOC_IMX53
 	bool "i.MX53 support"
 	select HAVE_IMX_SRC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select PINCTRL_IMX53
 	select SOC_IMX5
 
 	help
 	  This enables support for Freescale i.MX53 processor.
 
-config SOC_IMX6Q
-	bool "i.MX6 Quad/DualLite support"
-	select ARCH_HAS_CPUFREQ
-	select ARCH_HAS_OPP
+config SOC_IMX6
+	bool
 	select ARM_ERRATA_754322
-	select ARM_ERRATA_764369 if SMP
 	select ARM_ERRATA_775420
 	select ARM_GIC
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
 	select HAVE_IMX_ANATOP
 	select HAVE_IMX_GPC
 	select HAVE_IMX_MMDC
 	select HAVE_IMX_SRC
 	select MFD_SYSCON
-	select MIGHT_HAVE_PCI
-	select PCI_DOMAINS if PCI
-	select PINCTRL_IMX6Q
 	select PL310_ERRATA_588369 if CACHE_PL310
 	select PL310_ERRATA_727915 if CACHE_PL310
 	select PL310_ERRATA_769419 if CACHE_PL310
-	select PM_OPP if PM
+
+config SOC_IMX6Q
+	bool "i.MX6 Quad/DualLite support"
+	select ARM_ERRATA_764369 if SMP
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select MIGHT_HAVE_PCI
+	select PCI_DOMAINS if PCI
+	select PINCTRL_IMX6Q
+	select SOC_IMX6
 
 	help
 	  This enables support for Freescale i.MX6 Quad processor.
 
 config SOC_IMX6SL
 	bool "i.MX6 SoloLite support"
-	select ARM_ERRATA_754322
-	select ARM_ERRATA_775420
-	select ARM_GIC
-	select HAVE_IMX_ANATOP
-	select HAVE_IMX_GPC
-	select HAVE_IMX_MMDC
-	select HAVE_IMX_SRC
-	select MFD_SYSCON
 	select PINCTRL_IMX6SL
-	select PL310_ERRATA_588369 if CACHE_PL310
-	select PL310_ERRATA_727915 if CACHE_PL310
-	select PL310_ERRATA_769419 if CACHE_PL310
+	select SOC_IMX6
 
 	help
 	  This enables support for Freescale i.MX6 SoloLite processor.
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index ec419649320..f4ed83032dd 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
 ifeq ($(CONFIG_CPU_IDLE),y)
 obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o
 obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o
+obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o
 endif
 
 ifdef CONFIG_SND_IMX_SOC
@@ -101,9 +102,11 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
 obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
 
-obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
-# i.MX6SL reuses i.MX6Q code
-obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o headsmp.o
+ifeq ($(CONFIG_SUSPEND),y)
+AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
+obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
+endif
+obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
 
 # i.MX5 based machines
 obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c
index d7ed66091a2..bdc2e4630a0 100644
--- a/arch/arm/mach-imx/clk-imx21.c
+++ b/arch/arm/mach-imx/clk-imx21.c
@@ -149,7 +149,6 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
 	clk_register_clkdev(clk[per1], "per", "imx-gpt.1");
 	clk_register_clkdev(clk[gpt3_ipg_gate], "ipg", "imx-gpt.2");
 	clk_register_clkdev(clk[per1], "per", "imx-gpt.2");
-	clk_register_clkdev(clk[pwm_ipg_gate], "pwm", "mxc_pwm.0");
 	clk_register_clkdev(clk[per2], "per", "imx21-cspi.0");
 	clk_register_clkdev(clk[cspi1_ipg_gate], "ipg", "imx21-cspi.0");
 	clk_register_clkdev(clk[per2], "per", "imx21-cspi.1");
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index 69858c78f40..dc36e6c2f1d 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -265,14 +265,6 @@ int __init mx25_clocks_init(void)
 	clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");
 	clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1");
 	clk_register_clkdev(clk[cspi3_ipg], NULL, "imx35-cspi.2");
-	clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.0");
-	clk_register_clkdev(clk[per10], "per", "mxc_pwm.0");
-	clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.1");
-	clk_register_clkdev(clk[per10], "per", "mxc_pwm.1");
-	clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.2");
-	clk_register_clkdev(clk[per10], "per", "mxc_pwm.2");
-	clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.3");
-	clk_register_clkdev(clk[per10], "per", "mxc_pwm.3");
 	clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad");
 	clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc");
 	clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.0");
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index c6b40f38678..d2da8908b26 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -231,7 +231,6 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.4");
 	clk_register_clkdev(clk[gpt6_ipg_gate], "ipg", "imx-gpt.5");
 	clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.5");
-	clk_register_clkdev(clk[pwm_ipg_gate], NULL, "mxc_pwm.0");
 	clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.0");
 	clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "imx21-mmc.0");
 	clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.1");
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 19fca1fdc6f..568ef0a4de8 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -266,8 +266,6 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk_register_clkdev(clk[IMX5_CLK_ECSPI2_PER_GATE], "per", "imx51-ecspi.1");
 	clk_register_clkdev(clk[IMX5_CLK_ECSPI2_IPG_GATE], "ipg", "imx51-ecspi.1");
 	clk_register_clkdev(clk[IMX5_CLK_CSPI_IPG_GATE], NULL, "imx35-cspi.2");
-	clk_register_clkdev(clk[IMX5_CLK_PWM1_IPG_GATE], "pwm", "mxc_pwm.0");
-	clk_register_clkdev(clk[IMX5_CLK_PWM2_IPG_GATE], "pwm", "mxc_pwm.1");
 	clk_register_clkdev(clk[IMX5_CLK_I2C1_GATE], NULL, "imx21-i2c.0");
 	clk_register_clkdev(clk[IMX5_CLK_I2C2_GATE], NULL, "imx21-i2c.1");
 	clk_register_clkdev(clk[IMX5_CLK_USBOH3_PER_GATE], "per", "mxc-ehci.0");
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 4d677f44253..b0e7f9d2c24 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -437,12 +437,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 
 	clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0");
 	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
-	clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
-	clk_register_clkdev(clk[ahb], "ahb", NULL);
-	clk_register_clkdev(clk[cko1], "cko1", NULL);
-	clk_register_clkdev(clk[arm], NULL, "cpu0");
-	clk_register_clkdev(clk[pll4_post_div], "pll4_post_div", NULL);
-	clk_register_clkdev(clk[pll4_audio], "pll4_audio", NULL);
+	clk_register_clkdev(clk[enet_ref], "enet_ref", NULL);
 
 	if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) ||
 	    cpu_is_imx6dl()) {
diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c
index 4c86f303520..f7073c0782f 100644
--- a/arch/arm/mach-imx/clk-imx6sl.c
+++ b/arch/arm/mach-imx/clk-imx6sl.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -18,27 +18,43 @@
 #include "clk.h"
 #include "common.h"
 
-static const char const *step_sels[]		= { "osc", "pll2_pfd2", };
-static const char const *pll1_sw_sels[]		= { "pll1_sys", "step", };
-static const char const *ocram_alt_sels[]	= { "pll2_pfd2", "pll3_pfd1", };
-static const char const *ocram_sels[]		= { "periph", "ocram_alt_sels", };
-static const char const *pre_periph_sels[]	= { "pll2_bus", "pll2_pfd2", "pll2_pfd0", "pll2_198m", };
-static const char const *periph_clk2_sels[]	= { "pll3_usb_otg", "osc", "osc", "dummy", };
-static const char const *periph2_clk2_sels[]	= { "pll3_usb_otg", "pll2_bus", };
-static const char const *periph_sels[]		= { "pre_periph_sel", "periph_clk2_podf", };
-static const char const *periph2_sels[]		= { "pre_periph2_sel", "periph2_clk2_podf", };
-static const char const *csi_lcdif_sels[]	= { "mmdc", "pll2_pfd2", "pll3_120m", "pll3_pfd1", };
-static const char const *usdhc_sels[]		= { "pll2_pfd2", "pll2_pfd0", };
-static const char const *ssi_sels[]		= { "pll3_pfd2", "pll3_pfd3", "pll4_audio_div", "dummy", };
-static const char const *perclk_sels[]		= { "ipg", "osc", };
-static const char const *epdc_pxp_sels[]	= { "mmdc", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd1", };
-static const char const *gpu2d_ovg_sels[]	= { "pll3_pfd1", "pll3_usb_otg", "pll2_bus", "pll2_pfd2", };
-static const char const *gpu2d_sels[]		= { "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", "pll2_bus", };
-static const char const *lcdif_pix_sels[]	= { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll3_pfd0", "pll3_pfd1", };
-static const char const *epdc_pix_sels[]	= { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd1", "pll3_pfd1", };
-static const char const *audio_sels[]		= { "pll4_audio_div", "pll3_pfd2", "pll3_pfd3", "pll3_usb_otg", };
-static const char const *ecspi_sels[]		= { "pll3_60m", "osc", };
-static const char const *uart_sels[]		= { "pll3_80m", "osc", };
+#define CCSR			0xc
+#define BM_CCSR_PLL1_SW_CLK_SEL	(1 << 2)
+#define CACRR			0x10
+#define CDHIPR			0x48
+#define BM_CDHIPR_ARM_PODF_BUSY	(1 << 16)
+#define ARM_WAIT_DIV_396M	2
+#define ARM_WAIT_DIV_792M	4
+#define ARM_WAIT_DIV_996M	6
+
+#define PLL_ARM			0x0
+#define BM_PLL_ARM_DIV_SELECT	(0x7f << 0)
+#define BM_PLL_ARM_POWERDOWN	(1 << 12)
+#define BM_PLL_ARM_ENABLE	(1 << 13)
+#define BM_PLL_ARM_LOCK		(1 << 31)
+#define PLL_ARM_DIV_792M	66
+
+static const char *step_sels[]		= { "osc", "pll2_pfd2", };
+static const char *pll1_sw_sels[]	= { "pll1_sys", "step", };
+static const char *ocram_alt_sels[]	= { "pll2_pfd2", "pll3_pfd1", };
+static const char *ocram_sels[]		= { "periph", "ocram_alt_sels", };
+static const char *pre_periph_sels[]	= { "pll2_bus", "pll2_pfd2", "pll2_pfd0", "pll2_198m", };
+static const char *periph_clk2_sels[]	= { "pll3_usb_otg", "osc", "osc", "dummy", };
+static const char *periph2_clk2_sels[]	= { "pll3_usb_otg", "pll2_bus", };
+static const char *periph_sels[]	= { "pre_periph_sel", "periph_clk2_podf", };
+static const char *periph2_sels[]	= { "pre_periph2_sel", "periph2_clk2_podf", };
+static const char *csi_lcdif_sels[]	= { "mmdc", "pll2_pfd2", "pll3_120m", "pll3_pfd1", };
+static const char *usdhc_sels[]		= { "pll2_pfd2", "pll2_pfd0", };
+static const char *ssi_sels[]		= { "pll3_pfd2", "pll3_pfd3", "pll4_audio_div", "dummy", };
+static const char *perclk_sels[]	= { "ipg", "osc", };
+static const char *epdc_pxp_sels[]	= { "mmdc", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd1", };
+static const char *gpu2d_ovg_sels[]	= { "pll3_pfd1", "pll3_usb_otg", "pll2_bus", "pll2_pfd2", };
+static const char *gpu2d_sels[]		= { "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", "pll2_bus", };
+static const char *lcdif_pix_sels[]	= { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll3_pfd0", "pll3_pfd1", };
+static const char *epdc_pix_sels[]	= { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd1", "pll3_pfd1", };
+static const char *audio_sels[]		= { "pll4_audio_div", "pll3_pfd2", "pll3_pfd3", "pll3_usb_otg", };
+static const char *ecspi_sels[]		= { "pll3_60m", "osc", };
+static const char *uart_sels[]		= { "pll3_80m", "osc", };
 
 static struct clk_div_table clk_enet_ref_table[] = {
 	{ .val = 0, .div = 20, },
@@ -65,6 +81,89 @@ static struct clk_div_table video_div_table[] = {
 
 static struct clk *clks[IMX6SL_CLK_END];
 static struct clk_onecell_data clk_data;
+static void __iomem *ccm_base;
+static void __iomem *anatop_base;
+
+static const u32 clks_init_on[] __initconst = {
+	IMX6SL_CLK_IPG, IMX6SL_CLK_ARM, IMX6SL_CLK_MMDC_ROOT,
+};
+
+/*
+ * ERR005311 CCM: After exit from WAIT mode, unwanted interrupt(s) taken
+ *           during WAIT mode entry process could cause cache memory
+ *           corruption.
+ *
+ * Software workaround:
+ *     To prevent this issue from occurring, software should ensure that the
+ * ARM to IPG clock ratio is less than 12:5 (that is < 2.4x), before
+ * entering WAIT mode.
+ *
+ * This function will set the ARM clk to max value within the 12:5 limit.
+ * As IPG clock is fixed at 66MHz(so ARM freq must not exceed 158.4MHz),
+ * ARM freq are one of below setpoints: 396MHz, 792MHz and 996MHz, since
+ * the clk APIs can NOT be called in idle thread(may cause kernel schedule
+ * as there is sleep function in PLL wait function), so here we just slow
+ * down ARM to below freq according to previous freq:
+ *
+ * run mode      wait mode
+ * 396MHz   ->   132MHz;
+ * 792MHz   ->   158.4MHz;
+ * 996MHz   ->   142.3MHz;
+ */
+static int imx6sl_get_arm_divider_for_wait(void)
+{
+	if (readl_relaxed(ccm_base + CCSR) & BM_CCSR_PLL1_SW_CLK_SEL) {
+		return ARM_WAIT_DIV_396M;
+	} else {
+		if ((readl_relaxed(anatop_base + PLL_ARM) &
+			BM_PLL_ARM_DIV_SELECT) == PLL_ARM_DIV_792M)
+			return ARM_WAIT_DIV_792M;
+		else
+			return ARM_WAIT_DIV_996M;
+	}
+}
+
+static void imx6sl_enable_pll_arm(bool enable)
+{
+	static u32 saved_pll_arm;
+	u32 val;
+
+	if (enable) {
+		saved_pll_arm = val = readl_relaxed(anatop_base + PLL_ARM);
+		val |= BM_PLL_ARM_ENABLE;
+		val &= ~BM_PLL_ARM_POWERDOWN;
+		writel_relaxed(val, anatop_base + PLL_ARM);
+		while (!(__raw_readl(anatop_base + PLL_ARM) & BM_PLL_ARM_LOCK))
+			;
+	} else {
+		 writel_relaxed(saved_pll_arm, anatop_base + PLL_ARM);
+	}
+}
+
+void imx6sl_set_wait_clk(bool enter)
+{
+	static unsigned long saved_arm_div;
+	int arm_div_for_wait = imx6sl_get_arm_divider_for_wait();
+
+	/*
+	 * According to hardware design, arm podf change need
+	 * PLL1 clock enabled.
+	 */
+	if (arm_div_for_wait == ARM_WAIT_DIV_396M)
+		imx6sl_enable_pll_arm(true);
+
+	if (enter) {
+		saved_arm_div = readl_relaxed(ccm_base + CACRR);
+		writel_relaxed(arm_div_for_wait, ccm_base + CACRR);
+	} else {
+		writel_relaxed(saved_arm_div, ccm_base + CACRR);
+	}
+	while (__raw_readl(ccm_base + CDHIPR) & BM_CDHIPR_ARM_PODF_BUSY)
+		;
+
+	if (arm_div_for_wait == ARM_WAIT_DIV_396M)
+		imx6sl_enable_pll_arm(false);
+}
 
 static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 {
@@ -72,6 +171,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	void __iomem *base;
 	int irq;
 	int i;
+	int ret;
 
 	clks[IMX6SL_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
 	clks[IMX6SL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
@@ -80,6 +180,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-anatop");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
+	anatop_base = base;
 
 	/*                                             type               name            parent  base         div_mask */
 	clks[IMX6SL_CLK_PLL1_SYS]      = imx_clk_pllv3(IMX_PLLV3_SYS,	  "pll1_sys",	   "osc", base,        0x7f);
@@ -127,6 +228,7 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	np = ccm_node;
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
+	ccm_base = base;
 
 	/* Reuse imx6q pm code */
 	imx6q_pm_set_ccm_base(base);
@@ -258,6 +360,19 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	clk_register_clkdev(clks[IMX6SL_CLK_GPT], "ipg", "imx-gpt.0");
 	clk_register_clkdev(clks[IMX6SL_CLK_GPT_SERIAL], "per", "imx-gpt.0");
 
+	/* Ensure the AHB clk is at 132MHz. */
+	ret = clk_set_rate(clks[IMX6SL_CLK_AHB], 132000000);
+	if (ret)
+		pr_warn("%s: failed to set AHB clock rate %d!\n",
+			__func__, ret);
+
+	/*
+	 * Make sure those always on clocks are enabled to maintain the correct
+	 * usecount and enabling/disabling of parent PLLs.
+	 */
+	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+		clk_prepare_enable(clks[clks_init_on[i]]);
+
 	if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
 		clk_prepare_enable(clks[IMX6SL_CLK_USBPHY1_GATE]);
 		clk_prepare_enable(clks[IMX6SL_CLK_USBPHY2_GATE]);
diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c
index ecd66d8e20b..22dc3ee21fd 100644
--- a/arch/arm/mach-imx/clk-vf610.c
+++ b/arch/arm/mach-imx/clk-vf610.c
@@ -63,25 +63,25 @@ static void __iomem *anatop_base;
 static void __iomem *ccm_base;
 
 /* sources for multiplexer clocks, this is used multiple times */
-static const char const *fast_sels[]	= { "firc", "fxosc", };
-static const char const *slow_sels[]	= { "sirc_32k", "sxosc", };
-static const char const *pll1_sels[]	= { "pll1_main", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", };
-static const char const *pll2_sels[]	= { "pll2_main", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", };
-static const char const *sys_sels[]	= { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_main", "pll1_pfd_sel", "pll3_main", };
-static const char const *ddr_sels[]	= { "pll2_pfd2", "sys_sel", };
-static const char const *rmii_sels[]	= { "enet_ext", "audio_ext", "enet_50m", "enet_25m", };
-static const char const *enet_ts_sels[]	= { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", };
-static const char const *esai_sels[]	= { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
-static const char const *sai_sels[]	= { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
-static const char const *nfc_sels[]	= { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", };
-static const char const *qspi_sels[]	= { "pll3_main", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", };
-static const char const *esdhc_sels[]	= { "pll3_main", "pll3_pfd3", "pll1_pfd3", "platform_bus", };
-static const char const *dcu_sels[]	= { "pll1_pfd2", "pll3_main", };
-static const char const *gpu_sels[]	= { "pll2_pfd2", "pll3_pfd2", };
-static const char const *vadc_sels[]	= { "pll6_main_div", "pll3_main_div", "pll3_main", };
+static const char *fast_sels[]	= { "firc", "fxosc", };
+static const char *slow_sels[]	= { "sirc_32k", "sxosc", };
+static const char *pll1_sels[]	= { "pll1_main", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", };
+static const char *pll2_sels[]	= { "pll2_main", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", };
+static const char *sys_sels[]	= { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_main", "pll1_pfd_sel", "pll3_main", };
+static const char *ddr_sels[]	= { "pll2_pfd2", "sys_sel", };
+static const char *rmii_sels[]	= { "enet_ext", "audio_ext", "enet_50m", "enet_25m", };
+static const char *enet_ts_sels[]	= { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", };
+static const char *esai_sels[]	= { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
+static const char *sai_sels[]	= { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
+static const char *nfc_sels[]	= { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", };
+static const char *qspi_sels[]	= { "pll3_main", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", };
+static const char *esdhc_sels[]	= { "pll3_main", "pll3_pfd3", "pll1_pfd3", "platform_bus", };
+static const char *dcu_sels[]	= { "pll1_pfd2", "pll3_main", };
+static const char *gpu_sels[]	= { "pll2_pfd2", "pll3_pfd2", };
+static const char *vadc_sels[]	= { "pll6_main_div", "pll3_main_div", "pll3_main", };
 /* FTM counter clock source, not module clock */
-static const char const *ftm_ext_sels[]	= {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", };
-static const char const *ftm_fix_sels[]	= { "sxosc", "ipg_bus", };
+static const char *ftm_ext_sels[]	= {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", };
+static const char *ftm_fix_sels[]	= { "sxosc", "ipg_bus", };
 
 static struct clk_div_table pll4_main_div_table[] = {
 	{ .val = 0, .div = 1 },
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index baf439dc22d..b5241ea7670 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004-2013 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2004-2014 Freescale Semiconductor, Inc. All Rights Reserved.
  */
 
 /*
@@ -116,7 +116,6 @@ void imx_enable_cpu(int cpu, bool enable);
 void imx_set_cpu_jump(int cpu, void *jump_addr);
 u32 imx_get_cpu_arg(int cpu);
 void imx_set_cpu_arg(int cpu, u32 arg);
-void v7_cpu_resume(void);
 #ifdef CONFIG_SMP
 void v7_secondary_startup(void);
 void imx_scu_map_io(void);
@@ -139,13 +138,25 @@ void imx_anatop_init(void);
 void imx_anatop_pre_suspend(void);
 void imx_anatop_post_resume(void);
 int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
-void imx6q_set_chicken_bit(void);
+void imx6q_set_int_mem_clk_lpm(void);
+void imx6sl_set_wait_clk(bool enter);
 
 void imx_cpu_die(unsigned int cpu);
 int imx_cpu_kill(unsigned int cpu);
 
+#ifdef CONFIG_SUSPEND
+void v7_cpu_resume(void);
+void imx6_suspend(void __iomem *ocram_vbase);
+#else
+static inline void v7_cpu_resume(void) {}
+static inline void imx6_suspend(void __iomem *ocram_vbase) {}
+#endif
+
 void imx6q_pm_init(void);
+void imx6dl_pm_init(void);
+void imx6sl_pm_init(void);
 void imx6q_pm_set_ccm_base(void __iomem *base);
+
 #ifdef CONFIG_PM
 void imx5_pm_init(void);
 #else
diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c
index 23ddfb693b2..6bcae047904 100644
--- a/arch/arm/mach-imx/cpuidle-imx6q.c
+++ b/arch/arm/mach-imx/cpuidle-imx6q.c
@@ -68,8 +68,8 @@ int __init imx6q_cpuidle_init(void)
 	/* Need to enable SCU standby for entering WAIT modes */
 	imx_scu_standby_enable();
 
-	/* Set chicken bit to get a reliable WAIT mode support */
-	imx6q_set_chicken_bit();
+	/* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */
+	imx6q_set_int_mem_clk_lpm();
 
 	return cpuidle_register(&imx6q_cpuidle_driver, NULL);
 }
diff --git a/arch/arm/mach-imx/cpuidle-imx6sl.c b/arch/arm/mach-imx/cpuidle-imx6sl.c
new file mode 100644
index 00000000000..d4b6b8171fa
--- /dev/null
+++ b/arch/arm/mach-imx/cpuidle-imx6sl.c
@@ -0,0 +1,57 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/cpuidle.h>
+#include <linux/module.h>
+#include <asm/cpuidle.h>
+#include <asm/proc-fns.h>
+
+#include "common.h"
+#include "cpuidle.h"
+
+static int imx6sl_enter_wait(struct cpuidle_device *dev,
+			    struct cpuidle_driver *drv, int index)
+{
+	imx6q_set_lpm(WAIT_UNCLOCKED);
+	/*
+	 * Software workaround for ERR005311, see function
+	 * description for details.
+	 */
+	imx6sl_set_wait_clk(true);
+	cpu_do_idle();
+	imx6sl_set_wait_clk(false);
+	imx6q_set_lpm(WAIT_CLOCKED);
+
+	return index;
+}
+
+static struct cpuidle_driver imx6sl_cpuidle_driver = {
+	.name = "imx6sl_cpuidle",
+	.owner = THIS_MODULE,
+	.states = {
+		/* WFI */
+		ARM_CPUIDLE_WFI_STATE,
+		/* WAIT */
+		{
+			.exit_latency = 50,
+			.target_residency = 75,
+			.flags = CPUIDLE_FLAG_TIME_VALID |
+				CPUIDLE_FLAG_TIMER_STOP,
+			.enter = imx6sl_enter_wait,
+			.name = "WAIT",
+			.desc = "Clock off",
+		},
+	},
+	.state_count = 2,
+	.safe_state_index = 0,
+};
+
+int __init imx6sl_cpuidle_init(void)
+{
+	return cpuidle_register(&imx6sl_cpuidle_driver, NULL);
+}
diff --git a/arch/arm/mach-imx/cpuidle.h b/arch/arm/mach-imx/cpuidle.h
index 786f98ecc14..24e33670417 100644
--- a/arch/arm/mach-imx/cpuidle.h
+++ b/arch/arm/mach-imx/cpuidle.h
@@ -13,6 +13,7 @@
 #ifdef CONFIG_CPU_IDLE
 extern int imx5_cpuidle_init(void);
 extern int imx6q_cpuidle_init(void);
+extern int imx6sl_cpuidle_init(void);
 #else
 static inline int imx5_cpuidle_init(void)
 {
@@ -22,4 +23,8 @@ static inline int imx6q_cpuidle_init(void)
 {
 	return 0;
 }
+static inline int imx6sl_cpuidle_init(void)
+{
+	return 0;
+}
 #endif
diff --git a/arch/arm/mach-imx/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h
index 769563fdeaa..61a114cddc3 100644
--- a/arch/arm/mach-imx/devices-imx25.h
+++ b/arch/arm/mach-imx/devices-imx25.h
@@ -83,7 +83,3 @@ extern const struct imx_spi_imx_data imx25_cspi_data[];
 #define imx25_add_spi_imx0(pdata)	imx25_add_spi_imx(0, pdata)
 #define imx25_add_spi_imx1(pdata)	imx25_add_spi_imx(1, pdata)
 #define imx25_add_spi_imx2(pdata)	imx25_add_spi_imx(2, pdata)
-
-extern struct imx_mxc_pwm_data imx25_mxc_pwm_data[];
-#define imx25_add_mxc_pwm(id)	\
-	imx_add_mxc_pwm(&imx25_mxc_pwm_data[id])
diff --git a/arch/arm/mach-imx/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h
index deee5baee88..26389f35a2b 100644
--- a/arch/arm/mach-imx/devices-imx51.h
+++ b/arch/arm/mach-imx/devices-imx51.h
@@ -57,10 +57,6 @@ extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[];
 #define imx51_add_imx2_wdt(id)	\
 	imx_add_imx2_wdt(&imx51_imx2_wdt_data[id])
 
-extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[];
-#define imx51_add_mxc_pwm(id)	\
-	imx_add_mxc_pwm(&imx51_mxc_pwm_data[id])
-
 extern const struct imx_imx_keypad_data imx51_imx_keypad_data;
 #define imx51_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx51_imx_keypad_data, pdata)
diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig
index 68c74fb0373..2d260a5a307 100644
--- a/arch/arm/mach-imx/devices/Kconfig
+++ b/arch/arm/mach-imx/devices/Kconfig
@@ -67,9 +67,6 @@ config IMX_HAVE_PLATFORM_MXC_MMC
 config IMX_HAVE_PLATFORM_MXC_NAND
 	bool
 
-config IMX_HAVE_PLATFORM_MXC_PWM
-	bool
-
 config IMX_HAVE_PLATFORM_MXC_RNGA
 	bool
 	select ARCH_HAS_RNGA
diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile
index 67416fb1dc6..1cbc14cd80d 100644
--- a/arch/arm/mach-imx/devices/Makefile
+++ b/arch/arm/mach-imx/devices/Makefile
@@ -23,7 +23,6 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
-obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_PWM) += platform-mxc_pwm.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA) += platform-mxc_rnga.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
index c13b76b9f6b..61352a80bb5 100644
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h
@@ -290,15 +290,6 @@ struct imx_pata_imx_data {
 struct platform_device *__init imx_add_pata_imx(
 		const struct imx_pata_imx_data *data);
 
-struct imx_mxc_pwm_data {
-	int id;
-	resource_size_t iobase;
-	resource_size_t iosize;
-	resource_size_t irq;
-};
-struct platform_device *__init imx_add_mxc_pwm(
-		const struct imx_mxc_pwm_data *data);
-
 /* mxc_rtc */
 struct imx_mxc_rtc_data {
 	const char *devid;
diff --git a/arch/arm/mach-imx/devices/platform-mxc_pwm.c b/arch/arm/mach-imx/devices/platform-mxc_pwm.c
deleted file mode 100644
index dcd28977768..00000000000
--- a/arch/arm/mach-imx/devices/platform-mxc_pwm.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "../hardware.h"
-#include "devices-common.h"
-
-#define imx_mxc_pwm_data_entry_single(soc, _id, _hwid, _size)		\
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _PWM ## _hwid ## _BASE_ADDR,		\
-		.iosize = _size,					\
-		.irq = soc ## _INT_PWM ## _hwid,			\
-	}
-#define imx_mxc_pwm_data_entry(soc, _id, _hwid, _size)			\
-	[_id] = imx_mxc_pwm_data_entry_single(soc, _id, _hwid, _size)
-
-#ifdef CONFIG_SOC_IMX21
-const struct imx_mxc_pwm_data imx21_mxc_pwm_data __initconst =
-	imx_mxc_pwm_data_entry_single(MX21, 0, , SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX21 */
-
-#ifdef CONFIG_SOC_IMX25
-const struct imx_mxc_pwm_data imx25_mxc_pwm_data[] __initconst = {
-#define imx25_mxc_pwm_data_entry(_id, _hwid)				\
-	imx_mxc_pwm_data_entry(MX25, _id, _hwid, SZ_16K)
-	imx25_mxc_pwm_data_entry(0, 1),
-	imx25_mxc_pwm_data_entry(1, 2),
-	imx25_mxc_pwm_data_entry(2, 3),
-	imx25_mxc_pwm_data_entry(3, 4),
-};
-#endif /* ifdef CONFIG_SOC_IMX25 */
-
-#ifdef CONFIG_SOC_IMX27
-const struct imx_mxc_pwm_data imx27_mxc_pwm_data __initconst =
-	imx_mxc_pwm_data_entry_single(MX27, 0, , SZ_4K);
-#endif /* ifdef CONFIG_SOC_IMX27 */
-
-#ifdef CONFIG_SOC_IMX51
-const struct imx_mxc_pwm_data imx51_mxc_pwm_data[] __initconst = {
-#define imx51_mxc_pwm_data_entry(_id, _hwid)				\
-	imx_mxc_pwm_data_entry(MX51, _id, _hwid, SZ_16K)
-	imx51_mxc_pwm_data_entry(0, 1),
-	imx51_mxc_pwm_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
-struct platform_device *__init imx_add_mxc_pwm(
-		const struct imx_mxc_pwm_data *data)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + data->iosize - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return imx_add_platform_device("mxc_pwm", data->id,
-			res, ARRAY_SIZE(res), NULL, 0);
-}
diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h
index a3b0b04b45c..abf43bb47ec 100644
--- a/arch/arm/mach-imx/hardware.h
+++ b/arch/arm/mach-imx/hardware.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2004-2007, 2014 Freescale Semiconductor, Inc. All Rights Reserved.
  * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
  *
  * This program is free software; you can redistribute it and/or
@@ -20,7 +20,9 @@
 #ifndef __ASM_ARCH_MXC_HARDWARE_H__
 #define __ASM_ARCH_MXC_HARDWARE_H__
 
+#ifndef __ASSEMBLY__
 #include <asm/io.h>
+#endif
 #include <asm/sizes.h>
 
 #define addr_in_module(addr, mod) \
diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S
index 627f16f0e9d..de5047c8a6c 100644
--- a/arch/arm/mach-imx/headsmp.S
+++ b/arch/arm/mach-imx/headsmp.S
@@ -12,12 +12,7 @@
 
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/asm-offsets.h>
-#include <asm/hardware/cache-l2x0.h>
 
-	.section ".text.head", "ax"
-
-#ifdef CONFIG_SMP
 diag_reg_offset:
 	.word	g_diag_reg - .
 
@@ -34,38 +29,3 @@ ENTRY(v7_secondary_startup)
 	set_diag_reg
 	b	secondary_startup
 ENDPROC(v7_secondary_startup)
-#endif
-
-#ifdef CONFIG_ARM_CPU_SUSPEND
-/*
- * The following code must assume it is running from physical address
- * where absolute virtual addresses to the data section have to be
- * turned into relative ones.
- */
-
-#ifdef CONFIG_CACHE_L2X0
-	.macro	pl310_resume
-	adr	r0, l2x0_saved_regs_offset
-	ldr	r2, [r0]
-	add	r2, r2, r0
-	ldr	r0, [r2, #L2X0_R_PHY_BASE]	@ get physical base of l2x0
-	ldr	r1, [r2, #L2X0_R_AUX_CTRL]	@ get aux_ctrl value
-	str	r1, [r0, #L2X0_AUX_CTRL]	@ restore aux_ctrl
-	mov	r1, #0x1
-	str	r1, [r0, #L2X0_CTRL]		@ re-enable L2
-	.endm
-
-l2x0_saved_regs_offset:
-	.word	l2x0_saved_regs - .
-
-#else
-	.macro	pl310_resume
-	.endm
-#endif
-
-ENTRY(v7_cpu_resume)
-	bl	v7_invalidate_l1
-	pl310_resume
-	b	cpu_resume
-ENDPROC(v7_cpu_resume)
-#endif
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 76e5db4fce3..e60456d85c9 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -182,16 +182,83 @@ static void __init imx6q_enet_phy_init(void)
 
 static void __init imx6q_1588_init(void)
 {
+	struct device_node *np;
+	struct clk *ptp_clk;
+	struct clk *enet_ref;
 	struct regmap *gpr;
+	u32 clksel;
 
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-fec");
+	if (!np) {
+		pr_warn("%s: failed to find fec node\n", __func__);
+		return;
+	}
+
+	ptp_clk = of_clk_get(np, 2);
+	if (IS_ERR(ptp_clk)) {
+		pr_warn("%s: failed to get ptp clock\n", __func__);
+		goto put_node;
+	}
+
+	enet_ref = clk_get_sys(NULL, "enet_ref");
+	if (IS_ERR(enet_ref)) {
+		pr_warn("%s: failed to get enet clock\n", __func__);
+		goto put_ptp_clk;
+	}
+
+	/*
+	 * If enet_ref from ANATOP/CCM is the PTP clock source, we need to
+	 * set bit IOMUXC_GPR1[21].  Or the PTP clock must be from pad
+	 * (external OSC), and we need to clear the bit.
+	 */
+	clksel = ptp_clk == enet_ref ? IMX6Q_GPR1_ENET_CLK_SEL_ANATOP :
+				       IMX6Q_GPR1_ENET_CLK_SEL_PAD;
 	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
 	if (!IS_ERR(gpr))
 		regmap_update_bits(gpr, IOMUXC_GPR1,
 				IMX6Q_GPR1_ENET_CLK_SEL_MASK,
-				IMX6Q_GPR1_ENET_CLK_SEL_ANATOP);
+				clksel);
 	else
 		pr_err("failed to find fsl,imx6q-iomux-gpr regmap\n");
 
+	clk_put(enet_ref);
+put_ptp_clk:
+	clk_put(ptp_clk);
+put_node:
+	of_node_put(np);
+}
+
+static void __init imx6q_axi_init(void)
+{
+	struct regmap *gpr;
+	unsigned int mask;
+
+	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+	if (!IS_ERR(gpr)) {
+		/*
+		 * Enable the cacheable attribute of VPU and IPU
+		 * AXI transactions.
+		 */
+		mask = IMX6Q_GPR4_VPU_WR_CACHE_SEL |
+			IMX6Q_GPR4_VPU_RD_CACHE_SEL |
+			IMX6Q_GPR4_VPU_P_WR_CACHE_VAL |
+			IMX6Q_GPR4_VPU_P_RD_CACHE_VAL_MASK |
+			IMX6Q_GPR4_IPU_WR_CACHE_CTL |
+			IMX6Q_GPR4_IPU_RD_CACHE_CTL;
+		regmap_update_bits(gpr, IOMUXC_GPR4, mask, mask);
+
+		/* Increase IPU read QoS priority */
+		regmap_update_bits(gpr, IOMUXC_GPR6,
+				IMX6Q_GPR6_IPU1_ID00_RD_QOS_MASK |
+				IMX6Q_GPR6_IPU1_ID01_RD_QOS_MASK,
+				(0xf << 16) | (0x7 << 20));
+		regmap_update_bits(gpr, IOMUXC_GPR7,
+				IMX6Q_GPR7_IPU2_ID00_RD_QOS_MASK |
+				IMX6Q_GPR7_IPU2_ID01_RD_QOS_MASK,
+				(0xf << 16) | (0x7 << 20));
+	} else {
+		pr_warn("failed to find fsl,imx6q-iomuxc-gpr regmap\n");
+	}
 }
 
 static void __init imx6q_init_machine(void)
@@ -212,15 +279,18 @@ static void __init imx6q_init_machine(void)
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
 
 	imx_anatop_init();
-	imx6q_pm_init();
+	cpu_is_imx6q() ?  imx6q_pm_init() : imx6dl_pm_init();
 	imx6q_1588_init();
+	imx6q_axi_init();
 }
 
 #define OCOTP_CFG3			0x440
 #define OCOTP_CFG3_SPEED_SHIFT		16
 #define OCOTP_CFG3_SPEED_1P2GHZ		0x3
+#define OCOTP_CFG3_SPEED_996MHZ		0x2
+#define OCOTP_CFG3_SPEED_852MHZ		0x1
 
-static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev)
+static void __init imx6q_opp_check_speed_grading(struct device *cpu_dev)
 {
 	struct device_node *np;
 	void __iomem *base;
@@ -238,11 +308,29 @@ static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev)
 		goto put_node;
 	}
 
+	/*
+	 * SPEED_GRADING[1:0] defines the max speed of ARM:
+	 * 2b'11: 1200000000Hz;
+	 * 2b'10: 996000000Hz;
+	 * 2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz.
+	 * 2b'00: 792000000Hz;
+	 * We need to set the max speed of ARM according to fuse map.
+	 */
 	val = readl_relaxed(base + OCOTP_CFG3);
 	val >>= OCOTP_CFG3_SPEED_SHIFT;
-	if ((val & 0x3) != OCOTP_CFG3_SPEED_1P2GHZ)
+	val &= 0x3;
+
+	if (val != OCOTP_CFG3_SPEED_1P2GHZ)
 		if (dev_pm_opp_disable(cpu_dev, 1200000000))
 			pr_warn("failed to disable 1.2 GHz OPP\n");
+	if (val < OCOTP_CFG3_SPEED_996MHZ)
+		if (dev_pm_opp_disable(cpu_dev, 996000000))
+			pr_warn("failed to disable 996 MHz OPP\n");
+	if (cpu_is_imx6q()) {
+		if (val != OCOTP_CFG3_SPEED_852MHZ)
+			if (dev_pm_opp_disable(cpu_dev, 852000000))
+				pr_warn("failed to disable 852 MHz OPP\n");
+	}
 
 put_node:
 	of_node_put(np);
@@ -268,7 +356,7 @@ static void __init imx6q_opp_init(void)
 		goto put_node;
 	}
 
-	imx6q_opp_check_1p2ghz(cpu_dev);
+	imx6q_opp_check_speed_grading(cpu_dev);
 
 put_node:
 	of_node_put(np);
diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c
index 0f4fd4c0ab8..ad323385115 100644
--- a/arch/arm/mach-imx/mach-imx6sl.c
+++ b/arch/arm/mach-imx/mach-imx6sl.c
@@ -17,6 +17,7 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
+#include "cpuidle.h"
 
 static void __init imx6sl_fec_init(void)
 {
@@ -39,6 +40,8 @@ static void __init imx6sl_init_late(void)
 	/* imx6sl reuses imx6q cpufreq driver */
 	if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ))
 		platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0);
+
+	imx6sl_cpuidle_init();
 }
 
 static void __init imx6sl_init_machine(void)
@@ -55,8 +58,7 @@ static void __init imx6sl_init_machine(void)
 
 	imx6sl_fec_init();
 	imx_anatop_init();
-	/* Reuse imx6q pm code */
-	imx6q_pm_init();
+	imx6sl_pm_init();
 }
 
 static void __init imx6sl_init_irq(void)
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
new file mode 100644
index 00000000000..9392a8f4ef2
--- /dev/null
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -0,0 +1,551 @@
+/*
+ * Copyright 2011-2014 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/genalloc.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/suspend.h>
+#include <asm/cacheflush.h>
+#include <asm/fncpy.h>
+#include <asm/proc-fns.h>
+#include <asm/suspend.h>
+#include <asm/tlb.h>
+
+#include "common.h"
+#include "hardware.h"
+
+#define CCR				0x0
+#define BM_CCR_WB_COUNT			(0x7 << 16)
+#define BM_CCR_RBC_BYPASS_COUNT		(0x3f << 21)
+#define BM_CCR_RBC_EN			(0x1 << 27)
+
+#define CLPCR				0x54
+#define BP_CLPCR_LPM			0
+#define BM_CLPCR_LPM			(0x3 << 0)
+#define BM_CLPCR_BYPASS_PMIC_READY	(0x1 << 2)
+#define BM_CLPCR_ARM_CLK_DIS_ON_LPM	(0x1 << 5)
+#define BM_CLPCR_SBYOS			(0x1 << 6)
+#define BM_CLPCR_DIS_REF_OSC		(0x1 << 7)
+#define BM_CLPCR_VSTBY			(0x1 << 8)
+#define BP_CLPCR_STBY_COUNT		9
+#define BM_CLPCR_STBY_COUNT		(0x3 << 9)
+#define BM_CLPCR_COSC_PWRDOWN		(0x1 << 11)
+#define BM_CLPCR_WB_PER_AT_LPM		(0x1 << 16)
+#define BM_CLPCR_WB_CORE_AT_LPM		(0x1 << 17)
+#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS	(0x1 << 19)
+#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS	(0x1 << 21)
+#define BM_CLPCR_MASK_CORE0_WFI		(0x1 << 22)
+#define BM_CLPCR_MASK_CORE1_WFI		(0x1 << 23)
+#define BM_CLPCR_MASK_CORE2_WFI		(0x1 << 24)
+#define BM_CLPCR_MASK_CORE3_WFI		(0x1 << 25)
+#define BM_CLPCR_MASK_SCU_IDLE		(0x1 << 26)
+#define BM_CLPCR_MASK_L2CC_IDLE		(0x1 << 27)
+
+#define CGPR				0x64
+#define BM_CGPR_INT_MEM_CLK_LPM		(0x1 << 17)
+
+#define MX6Q_SUSPEND_OCRAM_SIZE		0x1000
+#define MX6_MAX_MMDC_IO_NUM		33
+
+static void __iomem *ccm_base;
+static void __iomem *suspend_ocram_base;
+static void (*imx6_suspend_in_ocram_fn)(void __iomem *ocram_vbase);
+
+/*
+ * suspend ocram space layout:
+ * ======================== high address ======================
+ *                              .
+ *                              .
+ *                              .
+ *                              ^
+ *                              ^
+ *                              ^
+ *                      imx6_suspend code
+ *              PM_INFO structure(imx6_cpu_pm_info)
+ * ======================== low address =======================
+ */
+
+struct imx6_pm_base {
+	phys_addr_t pbase;
+	void __iomem *vbase;
+};
+
+struct imx6_pm_socdata {
+	u32 cpu_type;
+	const char *mmdc_compat;
+	const char *src_compat;
+	const char *iomuxc_compat;
+	const char *gpc_compat;
+	const u32 mmdc_io_num;
+	const u32 *mmdc_io_offset;
+};
+
+static const u32 imx6q_mmdc_io_offset[] __initconst = {
+	0x5ac, 0x5b4, 0x528, 0x520, /* DQM0 ~ DQM3 */
+	0x514, 0x510, 0x5bc, 0x5c4, /* DQM4 ~ DQM7 */
+	0x56c, 0x578, 0x588, 0x594, /* CAS, RAS, SDCLK_0, SDCLK_1 */
+	0x5a8, 0x5b0, 0x524, 0x51c, /* SDQS0 ~ SDQS3 */
+	0x518, 0x50c, 0x5b8, 0x5c0, /* SDQS4 ~ SDQS7 */
+	0x784, 0x788, 0x794, 0x79c, /* GPR_B0DS ~ GPR_B3DS */
+	0x7a0, 0x7a4, 0x7a8, 0x748, /* GPR_B4DS ~ GPR_B7DS */
+	0x59c, 0x5a0, 0x750, 0x774, /* SODT0, SODT1, MODE_CTL, MODE */
+	0x74c,			    /* GPR_ADDS */
+};
+
+static const u32 imx6dl_mmdc_io_offset[] __initconst = {
+	0x470, 0x474, 0x478, 0x47c, /* DQM0 ~ DQM3 */
+	0x480, 0x484, 0x488, 0x48c, /* DQM4 ~ DQM7 */
+	0x464, 0x490, 0x4ac, 0x4b0, /* CAS, RAS, SDCLK_0, SDCLK_1 */
+	0x4bc, 0x4c0, 0x4c4, 0x4c8, /* DRAM_SDQS0 ~ DRAM_SDQS3 */
+	0x4cc, 0x4d0, 0x4d4, 0x4d8, /* DRAM_SDQS4 ~ DRAM_SDQS7 */
+	0x764, 0x770, 0x778, 0x77c, /* GPR_B0DS ~ GPR_B3DS */
+	0x780, 0x784, 0x78c, 0x748, /* GPR_B4DS ~ GPR_B7DS */
+	0x4b4, 0x4b8, 0x750, 0x760, /* SODT0, SODT1, MODE_CTL, MODE */
+	0x74c,			    /* GPR_ADDS */
+};
+
+static const u32 imx6sl_mmdc_io_offset[] __initconst = {
+	0x30c, 0x310, 0x314, 0x318, /* DQM0 ~ DQM3 */
+	0x5c4, 0x5cc, 0x5d4, 0x5d8, /* GPR_B0DS ~ GPR_B3DS */
+	0x300, 0x31c, 0x338, 0x5ac, /* CAS, RAS, SDCLK_0, GPR_ADDS */
+	0x33c, 0x340, 0x5b0, 0x5c0, /* SODT0, SODT1, MODE_CTL, MODE */
+	0x330, 0x334, 0x320,        /* SDCKE0, SDCKE1, RESET */
+};
+
+static const struct imx6_pm_socdata imx6q_pm_data __initconst = {
+	.cpu_type = MXC_CPU_IMX6Q,
+	.mmdc_compat = "fsl,imx6q-mmdc",
+	.src_compat = "fsl,imx6q-src",
+	.iomuxc_compat = "fsl,imx6q-iomuxc",
+	.gpc_compat = "fsl,imx6q-gpc",
+	.mmdc_io_num = ARRAY_SIZE(imx6q_mmdc_io_offset),
+	.mmdc_io_offset = imx6q_mmdc_io_offset,
+};
+
+static const struct imx6_pm_socdata imx6dl_pm_data __initconst = {
+	.cpu_type = MXC_CPU_IMX6DL,
+	.mmdc_compat = "fsl,imx6q-mmdc",
+	.src_compat = "fsl,imx6q-src",
+	.iomuxc_compat = "fsl,imx6dl-iomuxc",
+	.gpc_compat = "fsl,imx6q-gpc",
+	.mmdc_io_num = ARRAY_SIZE(imx6dl_mmdc_io_offset),
+	.mmdc_io_offset = imx6dl_mmdc_io_offset,
+};
+
+static const struct imx6_pm_socdata imx6sl_pm_data __initconst = {
+	.cpu_type = MXC_CPU_IMX6SL,
+	.mmdc_compat = "fsl,imx6sl-mmdc",
+	.src_compat = "fsl,imx6sl-src",
+	.iomuxc_compat = "fsl,imx6sl-iomuxc",
+	.gpc_compat = "fsl,imx6sl-gpc",
+	.mmdc_io_num = ARRAY_SIZE(imx6sl_mmdc_io_offset),
+	.mmdc_io_offset = imx6sl_mmdc_io_offset,
+};
+
+/*
+ * This structure is for passing necessary data for low level ocram
+ * suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct
+ * definition is changed, the offset definition in
+ * arch/arm/mach-imx/suspend-imx6.S must be also changed accordingly,
+ * otherwise, the suspend to ocram function will be broken!
+ */
+struct imx6_cpu_pm_info {
+	phys_addr_t pbase; /* The physical address of pm_info. */
+	phys_addr_t resume_addr; /* The physical resume address for asm code */
+	u32 cpu_type;
+	u32 pm_info_size; /* Size of pm_info. */
+	struct imx6_pm_base mmdc_base;
+	struct imx6_pm_base src_base;
+	struct imx6_pm_base iomuxc_base;
+	struct imx6_pm_base ccm_base;
+	struct imx6_pm_base gpc_base;
+	struct imx6_pm_base l2_base;
+	u32 mmdc_io_num; /* Number of MMDC IOs which need saved/restored. */
+	u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */
+} __aligned(8);
+
+void imx6q_set_int_mem_clk_lpm(void)
+{
+	u32 val = readl_relaxed(ccm_base + CGPR);
+
+	val |= BM_CGPR_INT_MEM_CLK_LPM;
+	writel_relaxed(val, ccm_base + CGPR);
+}
+
+static void imx6q_enable_rbc(bool enable)
+{
+	u32 val;
+
+	/*
+	 * need to mask all interrupts in GPC before
+	 * operating RBC configurations
+	 */
+	imx_gpc_mask_all();
+
+	/* configure RBC enable bit */
+	val = readl_relaxed(ccm_base + CCR);
+	val &= ~BM_CCR_RBC_EN;
+	val |= enable ? BM_CCR_RBC_EN : 0;
+	writel_relaxed(val, ccm_base + CCR);
+
+	/* configure RBC count */
+	val = readl_relaxed(ccm_base + CCR);
+	val &= ~BM_CCR_RBC_BYPASS_COUNT;
+	val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0;
+	writel(val, ccm_base + CCR);
+
+	/*
+	 * need to delay at least 2 cycles of CKIL(32K)
+	 * due to hardware design requirement, which is
+	 * ~61us, here we use 65us for safe
+	 */
+	udelay(65);
+
+	/* restore GPC interrupt mask settings */
+	imx_gpc_restore_all();
+}
+
+static void imx6q_enable_wb(bool enable)
+{
+	u32 val;
+
+	/* configure well bias enable bit */
+	val = readl_relaxed(ccm_base + CLPCR);
+	val &= ~BM_CLPCR_WB_PER_AT_LPM;
+	val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0;
+	writel_relaxed(val, ccm_base + CLPCR);
+
+	/* configure well bias count */
+	val = readl_relaxed(ccm_base + CCR);
+	val &= ~BM_CCR_WB_COUNT;
+	val |= enable ? BM_CCR_WB_COUNT : 0;
+	writel_relaxed(val, ccm_base + CCR);
+}
+
+int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
+{
+	struct irq_data *iomuxc_irq_data = irq_get_irq_data(32);
+	u32 val = readl_relaxed(ccm_base + CLPCR);
+
+	val &= ~BM_CLPCR_LPM;
+	switch (mode) {
+	case WAIT_CLOCKED:
+		break;
+	case WAIT_UNCLOCKED:
+		val |= 0x1 << BP_CLPCR_LPM;
+		val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM;
+		break;
+	case STOP_POWER_ON:
+		val |= 0x2 << BP_CLPCR_LPM;
+		break;
+	case WAIT_UNCLOCKED_POWER_OFF:
+		val |= 0x1 << BP_CLPCR_LPM;
+		val &= ~BM_CLPCR_VSTBY;
+		val &= ~BM_CLPCR_SBYOS;
+		break;
+	case STOP_POWER_OFF:
+		val |= 0x2 << BP_CLPCR_LPM;
+		val |= 0x3 << BP_CLPCR_STBY_COUNT;
+		val |= BM_CLPCR_VSTBY;
+		val |= BM_CLPCR_SBYOS;
+		if (cpu_is_imx6sl()) {
+			val |= BM_CLPCR_BYPASS_PMIC_READY;
+			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
+		} else {
+			val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * ERR007265: CCM: When improper low-power sequence is used,
+	 * the SoC enters low power mode before the ARM core executes WFI.
+	 *
+	 * Software workaround:
+	 * 1) Software should trigger IRQ #32 (IOMUX) to be always pending
+	 *    by setting IOMUX_GPR1_GINT.
+	 * 2) Software should then unmask IRQ #32 in GPC before setting CCM
+	 *    Low-Power mode.
+	 * 3) Software should mask IRQ #32 right after CCM Low-Power mode
+	 *    is set (set bits 0-1 of CCM_CLPCR).
+	 */
+	imx_gpc_irq_unmask(iomuxc_irq_data);
+	writel_relaxed(val, ccm_base + CLPCR);
+	imx_gpc_irq_mask(iomuxc_irq_data);
+
+	return 0;
+}
+
+static int imx6q_suspend_finish(unsigned long val)
+{
+	if (!imx6_suspend_in_ocram_fn) {
+		cpu_do_idle();
+	} else {
+		/*
+		 * call low level suspend function in ocram,
+		 * as we need to float DDR IO.
+		 */
+		local_flush_tlb_all();
+		imx6_suspend_in_ocram_fn(suspend_ocram_base);
+	}
+
+	return 0;
+}
+
+static int imx6q_pm_enter(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_MEM:
+		imx6q_set_lpm(STOP_POWER_OFF);
+		imx6q_enable_wb(true);
+		/*
+		 * For suspend into ocram, asm code already take care of
+		 * RBC setting, so we do NOT need to do that here.
+		 */
+		if (!imx6_suspend_in_ocram_fn)
+			imx6q_enable_rbc(true);
+		imx_gpc_pre_suspend();
+		imx_anatop_pre_suspend();
+		imx_set_cpu_jump(0, v7_cpu_resume);
+		/* Zzz ... */
+		cpu_suspend(0, imx6q_suspend_finish);
+		if (cpu_is_imx6q() || cpu_is_imx6dl())
+			imx_smp_prepare();
+		imx_anatop_post_resume();
+		imx_gpc_post_resume();
+		imx6q_enable_rbc(false);
+		imx6q_enable_wb(false);
+		imx6q_set_lpm(WAIT_CLOCKED);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct platform_suspend_ops imx6q_pm_ops = {
+	.enter = imx6q_pm_enter,
+	.valid = suspend_valid_only_mem,
+};
+
+void __init imx6q_pm_set_ccm_base(void __iomem *base)
+{
+	ccm_base = base;
+}
+
+static int __init imx6_pm_get_base(struct imx6_pm_base *base,
+				const char *compat)
+{
+	struct device_node *node;
+	struct resource res;
+	int ret = 0;
+
+	node = of_find_compatible_node(NULL, NULL, compat);
+	if (!node) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	ret = of_address_to_resource(node, 0, &res);
+	if (ret)
+		goto put_node;
+
+	base->pbase = res.start;
+	base->vbase = ioremap(res.start, resource_size(&res));
+	if (!base->vbase)
+		ret = -ENOMEM;
+
+put_node:
+	of_node_put(node);
+out:
+	return ret;
+}
+
+static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
+{
+	phys_addr_t ocram_pbase;
+	struct device_node *node;
+	struct platform_device *pdev;
+	struct imx6_cpu_pm_info *pm_info;
+	struct gen_pool *ocram_pool;
+	unsigned long ocram_base;
+	int i, ret = 0;
+	const u32 *mmdc_offset_array;
+
+	suspend_set_ops(&imx6q_pm_ops);
+
+	if (!socdata) {
+		pr_warn("%s: invalid argument!\n", __func__);
+		return -EINVAL;
+	}
+
+	node = of_find_compatible_node(NULL, NULL, "mmio-sram");
+	if (!node) {
+		pr_warn("%s: failed to find ocram node!\n", __func__);
+		return -ENODEV;
+	}
+
+	pdev = of_find_device_by_node(node);
+	if (!pdev) {
+		pr_warn("%s: failed to find ocram device!\n", __func__);
+		ret = -ENODEV;
+		goto put_node;
+	}
+
+	ocram_pool = dev_get_gen_pool(&pdev->dev);
+	if (!ocram_pool) {
+		pr_warn("%s: ocram pool unavailable!\n", __func__);
+		ret = -ENODEV;
+		goto put_node;
+	}
+
+	ocram_base = gen_pool_alloc(ocram_pool, MX6Q_SUSPEND_OCRAM_SIZE);
+	if (!ocram_base) {
+		pr_warn("%s: unable to alloc ocram!\n", __func__);
+		ret = -ENOMEM;
+		goto put_node;
+	}
+
+	ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base);
+
+	suspend_ocram_base = __arm_ioremap_exec(ocram_pbase,
+		MX6Q_SUSPEND_OCRAM_SIZE, false);
+
+	pm_info = suspend_ocram_base;
+	pm_info->pbase = ocram_pbase;
+	pm_info->resume_addr = virt_to_phys(v7_cpu_resume);
+	pm_info->pm_info_size = sizeof(*pm_info);
+
+	/*
+	 * ccm physical address is not used by asm code currently,
+	 * so get ccm virtual address directly, as we already have
+	 * it from ccm driver.
+	 */
+	pm_info->ccm_base.vbase = ccm_base;
+
+	ret = imx6_pm_get_base(&pm_info->mmdc_base, socdata->mmdc_compat);
+	if (ret) {
+		pr_warn("%s: failed to get mmdc base %d!\n", __func__, ret);
+		goto put_node;
+	}
+
+	ret = imx6_pm_get_base(&pm_info->src_base, socdata->src_compat);
+	if (ret) {
+		pr_warn("%s: failed to get src base %d!\n", __func__, ret);
+		goto src_map_failed;
+	}
+
+	ret = imx6_pm_get_base(&pm_info->iomuxc_base, socdata->iomuxc_compat);
+	if (ret) {
+		pr_warn("%s: failed to get iomuxc base %d!\n", __func__, ret);
+		goto iomuxc_map_failed;
+	}
+
+	ret = imx6_pm_get_base(&pm_info->gpc_base, socdata->gpc_compat);
+	if (ret) {
+		pr_warn("%s: failed to get gpc base %d!\n", __func__, ret);
+		goto gpc_map_failed;
+	}
+
+	ret = imx6_pm_get_base(&pm_info->l2_base, "arm,pl310-cache");
+	if (ret) {
+		pr_warn("%s: failed to get pl310-cache base %d!\n",
+			__func__, ret);
+		goto pl310_cache_map_failed;
+	}
+
+	pm_info->cpu_type = socdata->cpu_type;
+	pm_info->mmdc_io_num = socdata->mmdc_io_num;
+	mmdc_offset_array = socdata->mmdc_io_offset;
+
+	for (i = 0; i < pm_info->mmdc_io_num; i++) {
+		pm_info->mmdc_io_val[i][0] =
+			mmdc_offset_array[i];
+		pm_info->mmdc_io_val[i][1] =
+			readl_relaxed(pm_info->iomuxc_base.vbase +
+			mmdc_offset_array[i]);
+	}
+
+	imx6_suspend_in_ocram_fn = fncpy(
+		suspend_ocram_base + sizeof(*pm_info),
+		&imx6_suspend,
+		MX6Q_SUSPEND_OCRAM_SIZE - sizeof(*pm_info));
+
+	goto put_node;
+
+pl310_cache_map_failed:
+	iounmap(&pm_info->gpc_base.vbase);
+gpc_map_failed:
+	iounmap(&pm_info->iomuxc_base.vbase);
+iomuxc_map_failed:
+	iounmap(&pm_info->src_base.vbase);
+src_map_failed:
+	iounmap(&pm_info->mmdc_base.vbase);
+put_node:
+	of_node_put(node);
+
+	return ret;
+}
+
+static void __init imx6_pm_common_init(const struct imx6_pm_socdata
+					*socdata)
+{
+	struct regmap *gpr;
+	int ret;
+
+	WARN_ON(!ccm_base);
+
+	if (IS_ENABLED(CONFIG_SUSPEND)) {
+		ret = imx6q_suspend_init(socdata);
+		if (ret)
+			pr_warn("%s: No DDR LPM support with suspend %d!\n",
+				__func__, ret);
+	}
+
+	/*
+	 * This is for SW workaround step #1 of ERR007265, see comments
+	 * in imx6q_set_lpm for details of this errata.
+	 * Force IOMUXC irq pending, so that the interrupt to GPC can be
+	 * used to deassert dsm_request signal when the signal gets
+	 * asserted unexpectedly.
+	 */
+	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+	if (!IS_ERR(gpr))
+		regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT,
+				   IMX6Q_GPR1_GINT);
+}
+
+void __init imx6q_pm_init(void)
+{
+	imx6_pm_common_init(&imx6q_pm_data);
+}
+
+void __init imx6dl_pm_init(void)
+{
+	imx6_pm_common_init(&imx6dl_pm_data);
+}
+
+void __init imx6sl_pm_init(void)
+{
+	imx6_pm_common_init(&imx6sl_pm_data);
+}
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
deleted file mode 100644
index 29e3fe6a666..00000000000
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * Copyright 2011-2013 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/mfd/syscon.h>
-#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/regmap.h>
-#include <linux/suspend.h>
-#include <asm/cacheflush.h>
-#include <asm/proc-fns.h>
-#include <asm/suspend.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include "common.h"
-#include "hardware.h"
-
-#define CCR				0x0
-#define BM_CCR_WB_COUNT			(0x7 << 16)
-#define BM_CCR_RBC_BYPASS_COUNT		(0x3f << 21)
-#define BM_CCR_RBC_EN			(0x1 << 27)
-
-#define CLPCR				0x54
-#define BP_CLPCR_LPM			0
-#define BM_CLPCR_LPM			(0x3 << 0)
-#define BM_CLPCR_BYPASS_PMIC_READY	(0x1 << 2)
-#define BM_CLPCR_ARM_CLK_DIS_ON_LPM	(0x1 << 5)
-#define BM_CLPCR_SBYOS			(0x1 << 6)
-#define BM_CLPCR_DIS_REF_OSC		(0x1 << 7)
-#define BM_CLPCR_VSTBY			(0x1 << 8)
-#define BP_CLPCR_STBY_COUNT		9
-#define BM_CLPCR_STBY_COUNT		(0x3 << 9)
-#define BM_CLPCR_COSC_PWRDOWN		(0x1 << 11)
-#define BM_CLPCR_WB_PER_AT_LPM		(0x1 << 16)
-#define BM_CLPCR_WB_CORE_AT_LPM		(0x1 << 17)
-#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS	(0x1 << 19)
-#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS	(0x1 << 21)
-#define BM_CLPCR_MASK_CORE0_WFI		(0x1 << 22)
-#define BM_CLPCR_MASK_CORE1_WFI		(0x1 << 23)
-#define BM_CLPCR_MASK_CORE2_WFI		(0x1 << 24)
-#define BM_CLPCR_MASK_CORE3_WFI		(0x1 << 25)
-#define BM_CLPCR_MASK_SCU_IDLE		(0x1 << 26)
-#define BM_CLPCR_MASK_L2CC_IDLE		(0x1 << 27)
-
-#define CGPR				0x64
-#define BM_CGPR_CHICKEN_BIT		(0x1 << 17)
-
-static void __iomem *ccm_base;
-
-void imx6q_set_chicken_bit(void)
-{
-	u32 val = readl_relaxed(ccm_base + CGPR);
-
-	val |= BM_CGPR_CHICKEN_BIT;
-	writel_relaxed(val, ccm_base + CGPR);
-}
-
-static void imx6q_enable_rbc(bool enable)
-{
-	u32 val;
-
-	/*
-	 * need to mask all interrupts in GPC before
-	 * operating RBC configurations
-	 */
-	imx_gpc_mask_all();
-
-	/* configure RBC enable bit */
-	val = readl_relaxed(ccm_base + CCR);
-	val &= ~BM_CCR_RBC_EN;
-	val |= enable ? BM_CCR_RBC_EN : 0;
-	writel_relaxed(val, ccm_base + CCR);
-
-	/* configure RBC count */
-	val = readl_relaxed(ccm_base + CCR);
-	val &= ~BM_CCR_RBC_BYPASS_COUNT;
-	val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0;
-	writel(val, ccm_base + CCR);
-
-	/*
-	 * need to delay at least 2 cycles of CKIL(32K)
-	 * due to hardware design requirement, which is
-	 * ~61us, here we use 65us for safe
-	 */
-	udelay(65);
-
-	/* restore GPC interrupt mask settings */
-	imx_gpc_restore_all();
-}
-
-static void imx6q_enable_wb(bool enable)
-{
-	u32 val;
-
-	/* configure well bias enable bit */
-	val = readl_relaxed(ccm_base + CLPCR);
-	val &= ~BM_CLPCR_WB_PER_AT_LPM;
-	val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0;
-	writel_relaxed(val, ccm_base + CLPCR);
-
-	/* configure well bias count */
-	val = readl_relaxed(ccm_base + CCR);
-	val &= ~BM_CCR_WB_COUNT;
-	val |= enable ? BM_CCR_WB_COUNT : 0;
-	writel_relaxed(val, ccm_base + CCR);
-}
-
-int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
-{
-	struct irq_data *iomuxc_irq_data = irq_get_irq_data(32);
-	u32 val = readl_relaxed(ccm_base + CLPCR);
-
-	val &= ~BM_CLPCR_LPM;
-	switch (mode) {
-	case WAIT_CLOCKED:
-		break;
-	case WAIT_UNCLOCKED:
-		val |= 0x1 << BP_CLPCR_LPM;
-		val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM;
-		break;
-	case STOP_POWER_ON:
-		val |= 0x2 << BP_CLPCR_LPM;
-		break;
-	case WAIT_UNCLOCKED_POWER_OFF:
-		val |= 0x1 << BP_CLPCR_LPM;
-		val &= ~BM_CLPCR_VSTBY;
-		val &= ~BM_CLPCR_SBYOS;
-		break;
-	case STOP_POWER_OFF:
-		val |= 0x2 << BP_CLPCR_LPM;
-		val |= 0x3 << BP_CLPCR_STBY_COUNT;
-		val |= BM_CLPCR_VSTBY;
-		val |= BM_CLPCR_SBYOS;
-		if (cpu_is_imx6sl()) {
-			val |= BM_CLPCR_BYPASS_PMIC_READY;
-			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
-		} else {
-			val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
-		}
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	/*
-	 * ERR007265: CCM: When improper low-power sequence is used,
-	 * the SoC enters low power mode before the ARM core executes WFI.
-	 *
-	 * Software workaround:
-	 * 1) Software should trigger IRQ #32 (IOMUX) to be always pending
-	 *    by setting IOMUX_GPR1_GINT.
-	 * 2) Software should then unmask IRQ #32 in GPC before setting CCM
-	 *    Low-Power mode.
-	 * 3) Software should mask IRQ #32 right after CCM Low-Power mode
-	 *    is set (set bits 0-1 of CCM_CLPCR).
-	 */
-	imx_gpc_irq_unmask(iomuxc_irq_data);
-	writel_relaxed(val, ccm_base + CLPCR);
-	imx_gpc_irq_mask(iomuxc_irq_data);
-
-	return 0;
-}
-
-static int imx6q_suspend_finish(unsigned long val)
-{
-	cpu_do_idle();
-	return 0;
-}
-
-static int imx6q_pm_enter(suspend_state_t state)
-{
-	switch (state) {
-	case PM_SUSPEND_MEM:
-		imx6q_set_lpm(STOP_POWER_OFF);
-		imx6q_enable_wb(true);
-		imx6q_enable_rbc(true);
-		imx_gpc_pre_suspend();
-		imx_anatop_pre_suspend();
-		imx_set_cpu_jump(0, v7_cpu_resume);
-		/* Zzz ... */
-		cpu_suspend(0, imx6q_suspend_finish);
-		if (cpu_is_imx6q() || cpu_is_imx6dl())
-			imx_smp_prepare();
-		imx_anatop_post_resume();
-		imx_gpc_post_resume();
-		imx6q_enable_rbc(false);
-		imx6q_enable_wb(false);
-		imx6q_set_lpm(WAIT_CLOCKED);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static const struct platform_suspend_ops imx6q_pm_ops = {
-	.enter = imx6q_pm_enter,
-	.valid = suspend_valid_only_mem,
-};
-
-void __init imx6q_pm_set_ccm_base(void __iomem *base)
-{
-	ccm_base = base;
-}
-
-void __init imx6q_pm_init(void)
-{
-	struct regmap *gpr;
-
-	WARN_ON(!ccm_base);
-
-	/*
-	 * This is for SW workaround step #1 of ERR007265, see comments
-	 * in imx6q_set_lpm for details of this errata.
-	 * Force IOMUXC irq pending, so that the interrupt to GPC can be
-	 * used to deassert dsm_request signal when the signal gets
-	 * asserted unexpectedly.
-	 */
-	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
-	if (!IS_ERR(gpr))
-		regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT,
-				   IMX6Q_GPR1_GINT);
-
-
-	suspend_set_ops(&imx6q_pm_ops);
-}
diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S
new file mode 100644
index 00000000000..20048ff0573
--- /dev/null
+++ b/arch/arm/mach-imx/suspend-imx6.S
@@ -0,0 +1,361 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
+#include "hardware.h"
+
+/*
+ * ==================== low level suspend ====================
+ *
+ * Better to follow below rules to use ARM registers:
+ * r0: pm_info structure address;
+ * r1 ~ r4: for saving pm_info members;
+ * r5 ~ r10: free registers;
+ * r11: io base address.
+ *
+ * suspend ocram space layout:
+ * ======================== high address ======================
+ *                              .
+ *                              .
+ *                              .
+ *                              ^
+ *                              ^
+ *                              ^
+ *                      imx6_suspend code
+ *              PM_INFO structure(imx6_cpu_pm_info)
+ * ======================== low address =======================
+ */
+
+/*
+ * Below offsets are based on struct imx6_cpu_pm_info
+ * which defined in arch/arm/mach-imx/pm-imx6q.c, this
+ * structure contains necessary pm info for low level
+ * suspend related code.
+ */
+#define PM_INFO_PBASE_OFFSET			0x0
+#define PM_INFO_RESUME_ADDR_OFFSET		0x4
+#define PM_INFO_CPU_TYPE_OFFSET			0x8
+#define PM_INFO_PM_INFO_SIZE_OFFSET		0xC
+#define PM_INFO_MX6Q_MMDC_P_OFFSET		0x10
+#define PM_INFO_MX6Q_MMDC_V_OFFSET		0x14
+#define PM_INFO_MX6Q_SRC_P_OFFSET		0x18
+#define PM_INFO_MX6Q_SRC_V_OFFSET		0x1C
+#define PM_INFO_MX6Q_IOMUXC_P_OFFSET		0x20
+#define PM_INFO_MX6Q_IOMUXC_V_OFFSET		0x24
+#define PM_INFO_MX6Q_CCM_P_OFFSET		0x28
+#define PM_INFO_MX6Q_CCM_V_OFFSET		0x2C
+#define PM_INFO_MX6Q_GPC_P_OFFSET		0x30
+#define PM_INFO_MX6Q_GPC_V_OFFSET		0x34
+#define PM_INFO_MX6Q_L2_P_OFFSET		0x38
+#define PM_INFO_MX6Q_L2_V_OFFSET		0x3C
+#define PM_INFO_MMDC_IO_NUM_OFFSET		0x40
+#define PM_INFO_MMDC_IO_VAL_OFFSET		0x44
+
+#define MX6Q_SRC_GPR1	0x20
+#define MX6Q_SRC_GPR2	0x24
+#define MX6Q_MMDC_MAPSR	0x404
+#define MX6Q_MMDC_MPDGCTRL0	0x83c
+#define MX6Q_GPC_IMR1	0x08
+#define MX6Q_GPC_IMR2	0x0c
+#define MX6Q_GPC_IMR3	0x10
+#define MX6Q_GPC_IMR4	0x14
+#define MX6Q_CCM_CCR	0x0
+
+	.align 3
+
+	.macro  sync_l2_cache
+
+	/* sync L2 cache to drain L2's buffers to DRAM. */
+#ifdef CONFIG_CACHE_L2X0
+	ldr	r11, [r0, #PM_INFO_MX6Q_L2_V_OFFSET]
+	mov	r6, #0x0
+	str	r6, [r11, #L2X0_CACHE_SYNC]
+1:
+	ldr	r6, [r11, #L2X0_CACHE_SYNC]
+	ands	r6, r6, #0x1
+	bne	1b
+#endif
+
+	.endm
+
+	.macro	resume_mmdc
+
+	/* restore MMDC IO */
+	cmp	r5, #0x0
+	ldreq	r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET]
+	ldrne	r11, [r0, #PM_INFO_MX6Q_IOMUXC_P_OFFSET]
+
+	ldr	r6, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET]
+	ldr	r7, =PM_INFO_MMDC_IO_VAL_OFFSET
+	add	r7, r7, r0
+1:
+	ldr	r8, [r7], #0x4
+	ldr	r9, [r7], #0x4
+	str	r9, [r11, r8]
+	subs	r6, r6, #0x1
+	bne	1b
+
+	cmp	r5, #0x0
+	ldreq	r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET]
+	ldrne	r11, [r0, #PM_INFO_MX6Q_MMDC_P_OFFSET]
+
+	cmp 	r3, #MXC_CPU_IMX6SL
+	bne	4f
+
+	/* reset read FIFO, RST_RD_FIFO */
+	ldr	r7, =MX6Q_MMDC_MPDGCTRL0
+	ldr	r6, [r11, r7]
+	orr     r6, r6, #(1 << 31)
+	str	r6, [r11, r7]
+2:
+	ldr	r6, [r11, r7]
+	ands	r6, r6, #(1 << 31)
+	bne	2b
+
+	/* reset FIFO a second time */
+	ldr	r6, [r11, r7]
+	orr     r6, r6, #(1 << 31)
+	str	r6, [r11, r7]
+3:
+	ldr	r6, [r11, r7]
+	ands	r6, r6, #(1 << 31)
+	bne	3b
+4:
+	/* let DDR out of self-refresh */
+	ldr	r7, [r11, #MX6Q_MMDC_MAPSR]
+	bic	r7, r7, #(1 << 21)
+	str	r7, [r11, #MX6Q_MMDC_MAPSR]
+5:
+	ldr	r7, [r11, #MX6Q_MMDC_MAPSR]
+	ands	r7, r7, #(1 << 25)
+	bne	5b
+
+	/* enable DDR auto power saving */
+	ldr	r7, [r11, #MX6Q_MMDC_MAPSR]
+	bic	r7, r7, #0x1
+	str	r7, [r11, #MX6Q_MMDC_MAPSR]
+
+	.endm
+
+ENTRY(imx6_suspend)
+	ldr	r1, [r0, #PM_INFO_PBASE_OFFSET]
+	ldr	r2, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
+	ldr	r3, [r0, #PM_INFO_CPU_TYPE_OFFSET]
+	ldr	r4, [r0, #PM_INFO_PM_INFO_SIZE_OFFSET]
+
+	/*
+	 * counting the resume address in iram
+	 * to set it in SRC register.
+	 */
+	ldr	r6, =imx6_suspend
+	ldr	r7, =resume
+	sub	r7, r7, r6
+	add	r8, r1, r4
+	add	r9, r8, r7
+
+	/*
+	 * make sure TLB contain the addr we want,
+	 * as we will access them after MMDC IO floated.
+	 */
+
+	ldr	r11, [r0, #PM_INFO_MX6Q_CCM_V_OFFSET]
+	ldr	r6, [r11, #0x0]
+	ldr	r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET]
+	ldr	r6, [r11, #0x0]
+
+	/* use r11 to store the IO address */
+	ldr	r11, [r0, #PM_INFO_MX6Q_SRC_V_OFFSET]
+	/* store physical resume addr and pm_info address. */
+	str	r9, [r11, #MX6Q_SRC_GPR1]
+	str	r1, [r11, #MX6Q_SRC_GPR2]
+
+	/* need to sync L2 cache before DSM. */
+	sync_l2_cache
+
+	ldr	r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET]
+	/*
+	 * put DDR explicitly into self-refresh and
+	 * disable automatic power savings.
+	 */
+	ldr	r7, [r11, #MX6Q_MMDC_MAPSR]
+	orr	r7, r7, #0x1
+	str	r7, [r11, #MX6Q_MMDC_MAPSR]
+
+	/* make the DDR explicitly enter self-refresh. */
+	ldr	r7, [r11, #MX6Q_MMDC_MAPSR]
+	orr	r7, r7, #(1 << 21)
+	str	r7, [r11, #MX6Q_MMDC_MAPSR]
+
+poll_dvfs_set:
+	ldr	r7, [r11, #MX6Q_MMDC_MAPSR]
+	ands	r7, r7, #(1 << 25)
+	beq	poll_dvfs_set
+
+	ldr	r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET]
+	ldr	r6, =0x0
+	ldr	r7, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET]
+	ldr	r8, =PM_INFO_MMDC_IO_VAL_OFFSET
+	add	r8, r8, r0
+	/* i.MX6SL's last 3 IOs need special setting */
+	cmp	r3, #MXC_CPU_IMX6SL
+	subeq	r7, r7, #0x3
+set_mmdc_io_lpm:
+	ldr	r9, [r8], #0x8
+	str	r6, [r11, r9]
+	subs	r7, r7, #0x1
+	bne	set_mmdc_io_lpm
+
+	cmp 	r3, #MXC_CPU_IMX6SL
+	bne	set_mmdc_io_lpm_done
+	ldr	r6, =0x1000
+	ldr	r9, [r8], #0x8
+	str	r6, [r11, r9]
+	ldr	r9, [r8], #0x8
+	str	r6, [r11, r9]
+	ldr	r6, =0x80000
+	ldr	r9, [r8]
+	str	r6, [r11, r9]
+set_mmdc_io_lpm_done:
+
+	/*
+	 * mask all GPC interrupts before
+	 * enabling the RBC counters to
+	 * avoid the counter starting too
+	 * early if an interupt is already
+	 * pending.
+	 */
+	ldr	r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET]
+	ldr	r6, [r11, #MX6Q_GPC_IMR1]
+	ldr	r7, [r11, #MX6Q_GPC_IMR2]
+	ldr	r8, [r11, #MX6Q_GPC_IMR3]
+	ldr	r9, [r11, #MX6Q_GPC_IMR4]
+
+	ldr	r10, =0xffffffff
+	str	r10, [r11, #MX6Q_GPC_IMR1]
+	str	r10, [r11, #MX6Q_GPC_IMR2]
+	str	r10, [r11, #MX6Q_GPC_IMR3]
+	str	r10, [r11, #MX6Q_GPC_IMR4]
+
+	/*
+	 * enable the RBC bypass counter here
+	 * to hold off the interrupts. RBC counter
+	 * = 32 (1ms), Minimum RBC delay should be
+	 * 400us for the analog LDOs to power down.
+	 */
+	ldr	r11, [r0, #PM_INFO_MX6Q_CCM_V_OFFSET]
+	ldr	r10, [r11, #MX6Q_CCM_CCR]
+	bic	r10, r10, #(0x3f << 21)
+	orr	r10, r10, #(0x20 << 21)
+	str	r10, [r11, #MX6Q_CCM_CCR]
+
+	/* enable the counter. */
+	ldr	r10, [r11, #MX6Q_CCM_CCR]
+	orr	r10, r10, #(0x1 << 27)
+	str	r10, [r11, #MX6Q_CCM_CCR]
+
+	/* unmask all the GPC interrupts. */
+	ldr	r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET]
+	str	r6, [r11, #MX6Q_GPC_IMR1]
+	str	r7, [r11, #MX6Q_GPC_IMR2]
+	str	r8, [r11, #MX6Q_GPC_IMR3]
+	str	r9, [r11, #MX6Q_GPC_IMR4]
+
+	/*
+	 * now delay for a short while (3usec)
+	 * ARM is at 1GHz at this point
+	 * so a short loop should be enough.
+	 * this delay is required to ensure that
+	 * the RBC counter can start counting in
+	 * case an interrupt is already pending
+	 * or in case an interrupt arrives just
+	 * as ARM is about to assert DSM_request.
+	 */
+	ldr	r6, =2000
+rbc_loop:
+	subs	r6, r6, #0x1
+	bne	rbc_loop
+
+	/* Zzz, enter stop mode */
+	wfi
+	nop
+	nop
+	nop
+	nop
+
+	/*
+	 * run to here means there is pending
+	 * wakeup source, system should auto
+	 * resume, we need to restore MMDC IO first
+	 */
+	mov	r5, #0x0
+	resume_mmdc
+
+	/* return to suspend finish */
+	mov	pc, lr
+
+resume:
+	/* invalidate L1 I-cache first */
+	mov     r6, #0x0
+	mcr     p15, 0, r6, c7, c5, 0
+	mcr     p15, 0, r6, c7, c5, 6
+	/* enable the Icache and branch prediction */
+	mov     r6, #0x1800
+	mcr     p15, 0, r6, c1, c0, 0
+	isb
+
+	/* get physical resume address from pm_info. */
+	ldr	lr, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
+	/* clear core0's entry and parameter */
+	ldr	r11, [r0, #PM_INFO_MX6Q_SRC_P_OFFSET]
+	mov	r7, #0x0
+	str	r7, [r11, #MX6Q_SRC_GPR1]
+	str	r7, [r11, #MX6Q_SRC_GPR2]
+
+	ldr	r3, [r0, #PM_INFO_CPU_TYPE_OFFSET]
+	mov	r5, #0x1
+	resume_mmdc
+
+	mov	pc, lr
+ENDPROC(imx6_suspend)
+
+/*
+ * The following code must assume it is running from physical address
+ * where absolute virtual addresses to the data section have to be
+ * turned into relative ones.
+ */
+
+#ifdef CONFIG_CACHE_L2X0
+	.macro	pl310_resume
+	adr	r0, l2x0_saved_regs_offset
+	ldr	r2, [r0]
+	add	r2, r2, r0
+	ldr	r0, [r2, #L2X0_R_PHY_BASE]	@ get physical base of l2x0
+	ldr	r1, [r2, #L2X0_R_AUX_CTRL]	@ get aux_ctrl value
+	str	r1, [r0, #L2X0_AUX_CTRL]	@ restore aux_ctrl
+	mov	r1, #0x1
+	str	r1, [r0, #L2X0_CTRL]		@ re-enable L2
+	.endm
+
+l2x0_saved_regs_offset:
+	.word	l2x0_saved_regs - .
+
+#else
+	.macro	pl310_resume
+	.endm
+#endif
+
+ENTRY(v7_cpu_resume)
+	bl	v7_invalidate_l1
+	pl310_resume
+	b	cpu_resume
+ENDPROC(v7_cpu_resume)
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index 1a3a5f61577..65222ea0df6 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -25,6 +25,7 @@
 #include <linux/irq.h>
 #include <linux/clockchips.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/sched_clock.h>
 
@@ -116,11 +117,22 @@ static u64 notrace mxc_read_sched_clock(void)
 	return sched_clock_reg ? __raw_readl(sched_clock_reg) : 0;
 }
 
+static struct delay_timer imx_delay_timer;
+
+static unsigned long imx_read_current_timer(void)
+{
+	return __raw_readl(sched_clock_reg);
+}
+
 static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 	void __iomem *reg = timer_base + (timer_is_v2() ? V2_TCN : MX1_2_TCN);
 
+	imx_delay_timer.read_current_timer = &imx_read_current_timer;
+	imx_delay_timer.freq = c;
+	register_current_timer_delay(&imx_delay_timer);
+
 	sched_clock_reg = reg;
 
 	sched_clock_register(mxc_read_sched_clock, 32, c);