[ARM] 3830/1: iop3xx: board support file cleanup

Revamp the iop3xx board support: move the support code for each iop
board type into its own file, start using platform serial and platform
physmap flash devices, switch to a per-board time tick rate, and get
rid of the ARCH_EP80219 and STEPD config options by doing the relevant
checks at run time.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 files changed, 489 insertions, 454 deletions

diff --git a/arch/arm/mach-iop32x/Kconfig b/arch/arm/mach-iop32x/Kconfig
index 21e3e8c8c2a..ff8a77a8866 100644
--- a/arch/arm/mach-iop32x/Kconfig
+++ b/arch/arm/mach-iop32x/Kconfig
@@ -16,13 +16,6 @@ config ARCH_IQ31244
 	  Say Y here if you want to run your kernel on the Intel IQ31244
 	  evaluation kit for the IOP321 chipset.
 
-config ARCH_EP80219
-	bool "Enable support for EP80219"
-	select ARCH_IQ31244
-	help
-	  Say Y here if you want to run your kernel on the Intel EP80219
-	  evaluation kit for the Intel 80219 chipset (a IOP321 variant).
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-iop32x/Makefile b/arch/arm/mach-iop32x/Makefile
index ef561db20c9..af1747ae392 100644
--- a/arch/arm/mach-iop32x/Makefile
+++ b/arch/arm/mach-iop32x/Makefile
@@ -2,10 +2,10 @@
 # Makefile for the linux kernel.
 #
 
-obj-y			:= common.o setup.o irq.o
+obj-y			:= irq.o
 obj-m			:=
 obj-n			:=
 obj-			:=
 
-obj-$(CONFIG_ARCH_IQ80321) += iq80321-mm.o iq80321-pci.o
-obj-$(CONFIG_ARCH_IQ31244) += iq31244-mm.o iq31244-pci.o
+obj-$(CONFIG_ARCH_IQ80321) += iq80321.o
+obj-$(CONFIG_ARCH_IQ31244) += iq31244.o
diff --git a/arch/arm/mach-iop32x/common.c b/arch/arm/mach-iop32x/common.c
deleted file mode 100644
index 9a17a081327..00000000000
--- a/arch/arm/mach-iop32x/common.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * arch/arm/mach-iop32x/common.c
- *
- * Common routines shared across all IOP3xx implementations
- *
- * Author: Deepak Saxena <dsaxena@mvista.com>
- *
- * Copyright 2003 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/delay.h>
-#include <asm/hardware.h>
-#include <asm/hardware/iop3xx.h>
-
-#ifdef CONFIG_ARCH_EP80219
-#include <linux/kernel.h>
-/*
- * Default power-off for EP80219
- */
-
-static inline void ep80219_send_to_pic(__u8 c) {
-}
-
-void ep80219_power_off(void)
-{
-	/*
-     * This function will send a SHUTDOWN_COMPLETE message to the PIC controller
-     * over I2C.  We are not using the i2c subsystem since we are going to power
-     * off and it may be removed
-     */
-
-	/* Send the Address byte w/ the start condition */
-	*IOP3XX_IDBR1 = 0x60;
-	*IOP3XX_ICR1 = 0xE9;
-    mdelay(1);
-
-	/* Send the START_MSG byte w/ no start or stop condition */
-	*IOP3XX_IDBR1 = 0x0F;
-	*IOP3XX_ICR1 = 0xE8;
-    mdelay(1);
-
-	/* Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or stop condition */
-	*IOP3XX_IDBR1 = 0x03;
-	*IOP3XX_ICR1 = 0xE8;
-    mdelay(1);
-
-	/* Send an ignored byte w/ stop condition */
-	*IOP3XX_IDBR1 = 0x00;
-	*IOP3XX_ICR1 = 0xEA;
-
-	while (1) ;
-}
-
-#include <linux/init.h>
-#include <linux/pm.h>
-
-static int __init ep80219_init(void)
-{
-	pm_power_off = ep80219_power_off;
-	return 0;
-}
-arch_initcall(ep80219_init);
-#endif
diff --git a/arch/arm/mach-iop32x/iq31244-mm.c b/arch/arm/mach-iop32x/iq31244-mm.c
deleted file mode 100644
index fba22d5d908..00000000000
--- a/arch/arm/mach-iop32x/iq31244-mm.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * linux/arch/arm/mach-iop32x/iq31244-mm.c
- *
- * Low level memory initialization for iq80321 platform
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-#include <asm/hardware/iop3xx.h>
-
-
-/*
- * IQ80321 specific IO mappings
- *
- * We use RedBoot's setup for the onboard devices.
- */
-static struct map_desc iq31244_io_desc[] __initdata = {
-	{	/* on-board devices */
-		.virtual	= IQ31244_UART,
-		.pfn		= __phys_to_pfn(IQ31244_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}
-};
-
-void __init iq31244_map_io(void)
-{
-	iop3xx_map_io();
-
-	iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc));
-}
diff --git a/arch/arm/mach-iop32x/iq31244-pci.c b/arch/arm/mach-iop32x/iq31244-pci.c
deleted file mode 100644
index 605b7955374..00000000000
--- a/arch/arm/mach-iop32x/iq31244-pci.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * arch/arm/mach-iop32x/iq31244-pci.c
- *
- * PCI support for the Intel IQ31244 reference board
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-/*
- * The following macro is used to lookup irqs in a standard table
- * format for those systems that do not already have PCI
- * interrupts properly routed.  We assume 1 <= pin <= 4
- */
-#define PCI_IRQ_TABLE_LOOKUP(minid,maxid)	\
-({ int _ctl_ = -1;				\
-   unsigned int _idsel = idsel - minid;		\
-   if (_idsel <= maxid)				\
-      _ctl_ = pci_irq_table[_idsel][pin-1];	\
-   _ctl_; })
-
-#define INTA	IRQ_IQ31244_INTA
-#define INTB	IRQ_IQ31244_INTB
-#define INTC	IRQ_IQ31244_INTC
-#define INTD	IRQ_IQ31244_INTD
-
-#define INTE	IRQ_IQ31244_I82546
-
-static inline int __init
-iq31244_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
-{
-	static int pci_irq_table[][4] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 * A       B       C       D
-		 */
-#ifdef CONFIG_ARCH_EP80219
-		{INTB, INTB, INTB, INTB}, /* CFlash */
-		{INTE, INTE, INTE, INTE}, /* 82551 Pro 100 */
-		{INTD, INTD, INTD, INTD}, /* PCI-X Slot */
-		{INTC, INTC, INTC, INTC}, /* SATA   */
-#else
-		{INTB, INTB, INTB, INTB}, /* CFlash */
-		{INTC, INTC, INTC, INTC}, /* SATA   */
-		{INTD, INTD, INTD, INTD}, /* PCI-X Slot */
-		{INTE, INTE, INTE, INTE}, /* 82546 GigE */
-#endif // CONFIG_ARCH_EP80219
-	};
-
-	BUG_ON(pin < 1 || pin > 4);
-
-	return PCI_IRQ_TABLE_LOOKUP(0, 7);
-}
-
-static struct hw_pci iq31244_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
-	.nr_controllers = 1,
-	.setup		= iop3xx_pci_setup,
-	.scan		= iop3xx_pci_scan_bus,
-	.preinit	= iop3xx_pci_preinit,
-	.map_irq	= iq31244_map_irq
-};
-
-static int __init iq31244_pci_init(void)
-{
-	if (machine_is_iq31244())
-		pci_common_init(&iq31244_pci);
-	return 0;
-}
-
-subsys_initcall(iq31244_pci_init);
-
-
-
-
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
new file mode 100644
index 00000000000..88b77d32b0a
--- /dev/null
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -0,0 +1,293 @@
+/*
+ * arch/arm/mach-iop32x/iq31244.c
+ *
+ * Board support code for the Intel EP80219 and IQ31244 platforms.
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ * Copyright 2003 (c) MontaVista, Software, Inc.
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+
+/*
+ * The EP80219 and IQ31244 use the same machine ID.  To find out
+ * which of the two we're running on, we look at the processor ID.
+ */
+static int is_80219(void)
+{
+	extern int processor_id;
+	return !!((processor_id & 0xffffffe0) == 0x69052e20);
+}
+
+
+/*
+ * EP80219/IQ31244 timer tick configuration.
+ */
+static void __init iq31244_timer_init(void)
+{
+	if (is_80219()) {
+		/* 33.333 MHz crystal.  */
+		iop3xx_init_time(200000000);
+	} else {
+		/* 33.000 MHz crystal.  */
+		iop3xx_init_time(198000000);
+	}
+}
+
+static struct sys_timer iq31244_timer = {
+	.init		= iq31244_timer_init,
+	.offset		= iop3xx_gettimeoffset,
+};
+
+
+/*
+ * IQ31244 I/O.
+ */
+static struct map_desc iq31244_io_desc[] __initdata = {
+	{	/* on-board devices */
+		.virtual	= IQ31244_UART,
+		.pfn		= __phys_to_pfn(IQ31244_UART),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init iq31244_map_io(void)
+{
+	iop3xx_map_io();
+	iotable_init(iq31244_io_desc, ARRAY_SIZE(iq31244_io_desc));
+}
+
+
+/*
+ * EP80219/IQ31244 PCI.
+ */
+static inline int __init
+ep80219_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	if (slot == 0) {
+		/* CFlash */
+		irq = IRQ_IOP321_XINT1;
+	} else if (slot == 1) {
+		/* 82551 Pro 100 */
+		irq = IRQ_IOP321_XINT0;
+	} else if (slot == 2) {
+		/* PCI-X Slot */
+		irq = IRQ_IOP321_XINT3;
+	} else if (slot == 3) {
+		/* SATA */
+		irq = IRQ_IOP321_XINT2;
+	} else {
+		printk(KERN_ERR "ep80219_pci_map_irq() called for unknown "
+			"device PCI:%d:%d:%d\n", dev->bus->number,
+			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+		irq = -1;
+	}
+
+	return irq;
+}
+
+static struct hw_pci ep80219_pci __initdata = {
+	.swizzle	= pci_std_swizzle,
+	.nr_controllers = 1,
+	.setup		= iop3xx_pci_setup,
+	.preinit	= iop3xx_pci_preinit,
+	.scan		= iop3xx_pci_scan_bus,
+	.map_irq	= ep80219_pci_map_irq,
+};
+
+static inline int __init
+iq31244_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	if (slot == 0) {
+		/* CFlash */
+		irq = IRQ_IOP321_XINT1;
+	} else if (slot == 1) {
+		/* SATA */
+		irq = IRQ_IOP321_XINT2;
+	} else if (slot == 2) {
+		/* PCI-X Slot */
+		irq = IRQ_IOP321_XINT3;
+	} else if (slot == 3) {
+		/* 82546 GigE */
+		irq = IRQ_IOP321_XINT0;
+	} else {
+		printk(KERN_ERR "iq31244_pci_map_irq() called for unknown "
+			"device PCI:%d:%d:%d\n", dev->bus->number,
+			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+		irq = -1;
+	}
+
+	return irq;
+}
+
+static struct hw_pci iq31244_pci __initdata = {
+	.swizzle	= pci_std_swizzle,
+	.nr_controllers = 1,
+	.setup		= iop3xx_pci_setup,
+	.preinit	= iop3xx_pci_preinit,
+	.scan		= iop3xx_pci_scan_bus,
+	.map_irq	= iq31244_pci_map_irq,
+};
+
+static int __init iq31244_pci_init(void)
+{
+	if (machine_is_iq31244()) {
+		if (is_80219()) {
+			pci_common_init(&ep80219_pci);
+		} else {
+			pci_common_init(&iq31244_pci);
+		}
+	}
+
+	return 0;
+}
+
+subsys_initcall(iq31244_pci_init);
+
+
+/*
+ * IQ31244 machine initialisation.
+ */
+static struct physmap_flash_data iq31244_flash_data = {
+	.width		= 2,
+};
+
+static struct resource iq31244_flash_resource = {
+	.start		= 0xf0000000,
+	.end		= 0xf07fffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device iq31244_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &iq31244_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &iq31244_flash_resource,
+};
+
+static struct plat_serial8250_port iq31244_serial_port[] = {
+	{
+		.mapbase	= IQ31244_UART,
+		.membase	= (char *)IQ31244_UART,
+		.irq		= IRQ_IOP321_XINT1,
+		.flags		= UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= 1843200,
+	},
+	{ },
+};
+
+static struct resource iq31244_uart_resource = {
+	.start		= IQ31244_UART,
+	.end		= IQ31244_UART + 7,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device iq31244_serial_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+		.platform_data		= iq31244_serial_port,
+	},
+	.num_resources	= 1,
+	.resource	= &iq31244_uart_resource,
+};
+
+/*
+ * This function will send a SHUTDOWN_COMPLETE message to the PIC
+ * controller over I2C.  We are not using the i2c subsystem since
+ * we are going to power off and it may be removed
+ */
+void ep80219_power_off(void)
+{
+	/*
+	 * Send the Address byte w/ the start condition
+	 */
+	*IOP3XX_IDBR1 = 0x60;
+	*IOP3XX_ICR1 = 0xE9;
+	mdelay(1);
+
+	/*
+	 * Send the START_MSG byte w/ no start or stop condition
+	 */
+	*IOP3XX_IDBR1 = 0x0F;
+	*IOP3XX_ICR1 = 0xE8;
+	mdelay(1);
+
+	/*
+	 * Send the SHUTDOWN_COMPLETE Message ID byte w/ no start or
+	 * stop condition
+	 */
+	*IOP3XX_IDBR1 = 0x03;
+	*IOP3XX_ICR1 = 0xE8;
+	mdelay(1);
+
+	/*
+	 * Send an ignored byte w/ stop condition
+	 */
+	*IOP3XX_IDBR1 = 0x00;
+	*IOP3XX_ICR1 = 0xEA;
+
+	while (1)
+		;
+}
+
+static void __init iq31244_init_machine(void)
+{
+	platform_device_register(&iop3xx_i2c0_device);
+	platform_device_register(&iop3xx_i2c1_device);
+	platform_device_register(&iq31244_flash_device);
+	platform_device_register(&iq31244_serial_device);
+
+	if (is_80219())
+		pm_power_off = ep80219_power_off;
+}
+
+MACHINE_START(IQ31244, "Intel IQ31244")
+	/* Maintainer: Intel Corp. */
+	.phys_io	= IQ31244_UART,
+	.io_pg_offst	= ((IQ31244_UART) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= iq31244_map_io,
+	.init_irq	= iop321_init_irq,
+	.timer		= &iq31244_timer,
+	.init_machine	= iq31244_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-iop32x/iq80321-mm.c b/arch/arm/mach-iop32x/iq80321-mm.c
deleted file mode 100644
index b6a3079ad29..00000000000
--- a/arch/arm/mach-iop32x/iq80321-mm.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * linux/arch/arm/mach-iop32x/iq80321-mm.c
- *
- * Low level memory initialization for iq80321 platform
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-#include <asm/hardware/iop3xx.h>
-
-
-/*
- * IQ80321 specific IO mappings
- *
- * We use RedBoot's setup for the onboard devices.
- */
-static struct map_desc iq80321_io_desc[] __initdata = {
- 	{	/* on-board devices */
-		.virtual	= IQ80321_UART,
-		.pfn		= __phys_to_pfn(IQ80321_UART),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}
-};
-
-void __init iq80321_map_io(void)
-{
-	iop3xx_map_io();
-
-	iotable_init(iq80321_io_desc, ARRAY_SIZE(iq80321_io_desc));
-}
diff --git a/arch/arm/mach-iop32x/iq80321-pci.c b/arch/arm/mach-iop32x/iq80321-pci.c
deleted file mode 100644
index cedc37b968b..00000000000
--- a/arch/arm/mach-iop32x/iq80321-pci.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * arch/arm/mach-iop32x/iq80321-pci.c
- *
- * PCI support for the Intel IQ80321 reference board
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-
-/*
- * The following macro is used to lookup irqs in a standard table
- * format for those systems that do not already have PCI
- * interrupts properly routed.  We assume 1 <= pin <= 4
- */
-#define PCI_IRQ_TABLE_LOOKUP(minid,maxid)	\
-({ int _ctl_ = -1;				\
-   unsigned int _idsel = idsel - minid;		\
-   if (_idsel <= maxid)				\
-      _ctl_ = pci_irq_table[_idsel][pin-1];	\
-   _ctl_; })
-
-#define INTA	IRQ_IQ80321_INTA
-#define INTB	IRQ_IQ80321_INTB
-#define INTC	IRQ_IQ80321_INTC
-#define INTD	IRQ_IQ80321_INTD
-
-#define INTE	IRQ_IQ80321_I82544
-
-static inline int __init
-iq80321_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
-{
-	static int pci_irq_table[][4] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 * A       B       C       D
-		 */
-		{INTE, INTE, INTE, INTE}, /* Gig-E */
-		{-1, -1, -1, -1}, 	  /* Unused */
-		{INTC, INTD, INTA, INTB}, /* PCI-X Slot */
-		{-1, -1, -1, -1},
-	};
-
-	BUG_ON(pin < 1 || pin > 4);
-
-//	return PCI_IRQ_TABLE_LOOKUP(4, 7);
-	return pci_irq_table[idsel%4][pin-1];
-}
-
-static struct hw_pci iq80321_pci __initdata = {
-	.swizzle	= pci_std_swizzle,
-	.nr_controllers = 1,
-	.setup		= iop3xx_pci_setup,
-	.scan		= iop3xx_pci_scan_bus,
-	.preinit	= iop3xx_pci_preinit,
-	.map_irq	= iq80321_map_irq
-};
-
-static int __init iq80321_pci_init(void)
-{
-	if (machine_is_iq80321())
-		pci_common_init(&iq80321_pci);
-	return 0;
-}
-
-subsys_initcall(iq80321_pci_init);
-
-
-
-
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
new file mode 100644
index 00000000000..3c9b8627175
--- /dev/null
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -0,0 +1,193 @@
+/*
+ * arch/arm/mach-iop32x/iq80321.c
+ *
+ * Board support code for the Intel IQ80321 platform.
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+/*
+ * IQ80321 timer tick configuration.
+ */
+static void __init iq80321_timer_init(void)
+{
+	/* 33.333 MHz crystal.  */
+	iop3xx_init_time(200000000);
+}
+
+static struct sys_timer iq80321_timer = {
+	.init		= iq80321_timer_init,
+	.offset		= iop3xx_gettimeoffset,
+};
+
+
+/*
+ * IQ80321 I/O.
+ */
+static struct map_desc iq80321_io_desc[] __initdata = {
+ 	{	/* on-board devices */
+		.virtual	= IQ80321_UART,
+		.pfn		= __phys_to_pfn(IQ80321_UART),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init iq80321_map_io(void)
+{
+	iop3xx_map_io();
+	iotable_init(iq80321_io_desc, ARRAY_SIZE(iq80321_io_desc));
+}
+
+
+/*
+ * IQ80321 PCI.
+ */
+static inline int __init
+iq80321_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	if ((slot == 2 || slot == 6) && pin == 1) {
+		/* PCI-X Slot INTA */
+		irq = IRQ_IOP321_XINT2;
+	} else if ((slot == 2 || slot == 6) && pin == 2) {
+		/* PCI-X Slot INTA */
+		irq = IRQ_IOP321_XINT3;
+	} else if ((slot == 2 || slot == 6) && pin == 3) {
+		/* PCI-X Slot INTA */
+		irq = IRQ_IOP321_XINT0;
+	} else if ((slot == 2 || slot == 6) && pin == 4) {
+		/* PCI-X Slot INTA */
+		irq = IRQ_IOP321_XINT1;
+	} else if (slot == 4 || slot == 8) {
+		/* Gig-E */
+		irq = IRQ_IOP321_XINT0;
+	} else {
+		printk(KERN_ERR "iq80321_pci_map_irq() called for unknown "
+			"device PCI:%d:%d:%d\n", dev->bus->number,
+			PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
+		irq = -1;
+	}
+
+	return irq;
+}
+
+static struct hw_pci iq80321_pci __initdata = {
+	.swizzle	= pci_std_swizzle,
+	.nr_controllers = 1,
+	.setup		= iop3xx_pci_setup,
+	.preinit	= iop3xx_pci_preinit,
+	.scan		= iop3xx_pci_scan_bus,
+	.map_irq	= iq80321_pci_map_irq,
+};
+
+static int __init iq80321_pci_init(void)
+{
+	if (machine_is_iq80321())
+		pci_common_init(&iq80321_pci);
+
+	return 0;
+}
+
+subsys_initcall(iq80321_pci_init);
+
+
+/*
+ * IQ80321 machine initialisation.
+ */
+static struct physmap_flash_data iq80321_flash_data = {
+	.width		= 1,
+};
+
+static struct resource iq80321_flash_resource = {
+	.start		= 0xf0000000,
+	.end		= 0xf07fffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device iq80321_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &iq80321_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &iq80321_flash_resource,
+};
+
+static struct plat_serial8250_port iq80321_serial_port[] = {
+	{
+		.mapbase	= IQ80321_UART,
+		.membase	= (char *)IQ80321_UART,
+		.irq		= IRQ_IOP321_XINT1,
+		.flags		= UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= 1843200,
+	},
+	{ },
+};
+
+static struct resource iq80321_uart_resource = {
+	.start		= IQ80321_UART,
+	.end		= IQ80321_UART + 7,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device iq80321_serial_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+		.platform_data		= iq80321_serial_port,
+	},
+	.num_resources	= 1,
+	.resource	= &iq80321_uart_resource,
+};
+
+static void __init iq80321_init_machine(void)
+{
+	platform_device_register(&iop3xx_i2c0_device);
+	platform_device_register(&iop3xx_i2c1_device);
+	platform_device_register(&iq80321_flash_device);
+	platform_device_register(&iq80321_serial_device);
+}
+
+MACHINE_START(IQ80321, "Intel IQ80321")
+	/* Maintainer: Intel Corp. */
+	.phys_io	= IQ80321_UART,
+	.io_pg_offst	= ((IQ80321_UART) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= iq80321_map_io,
+	.init_irq	= iop321_init_irq,
+	.timer		= &iq80321_timer,
+	.init_machine	= iq80321_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-iop32x/setup.c b/arch/arm/mach-iop32x/setup.c
deleted file mode 100644
index 68de247a4cc..00000000000
--- a/arch/arm/mach-iop32x/setup.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * linux/arch/arm/mach-iop32x/setup.c
- *
- * Author: Nicolas Pitre <nico@cam.org>
- * Copyright (C) 2001 MontaVista Software, Inc.
- * Copyright (C) 2004 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-#include <asm/system.h>
-#include <asm/memory.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/hardware/iop3xx.h>
-
-#define IOP321_UART_XTAL 1843200
-
-#ifdef CONFIG_ARCH_IQ80321
-#define UARTBASE IQ80321_UART
-#define IRQ_UART IRQ_IQ80321_UART
-#endif
-
-#ifdef CONFIG_ARCH_IQ31244
-#define UARTBASE IQ31244_UART
-#define IRQ_UART IRQ_IQ31244_UART
-#endif
-
-static struct uart_port iop321_serial_ports[] = {
-	{
-		.membase	= (char*)(UARTBASE),
-		.mapbase	= (UARTBASE),
-		.irq		= IRQ_UART,
-		.flags		= UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 0,
-		.uartclk	= IOP321_UART_XTAL,
-		.line		= 0,
-		.type		= PORT_16550A,
-		.fifosize	= 16
-	}
-};
-
-void __init iop32x_init(void)
-{
-	platform_device_register(&iop3xx_i2c0_device);
-	platform_device_register(&iop3xx_i2c1_device);
-	early_serial_setup(&iop321_serial_ports[0]);
-}
-
-#ifdef CONFIG_ARCH_IQ80321
-extern void iq80321_map_io(void);
-#endif
-
-#ifdef CONFIG_ARCH_IQ31244
-extern void iq31244_map_io(void);
-#endif
-
-static void __init iop3xx_timer_init(void)
-{
-	iop3xx_init_time(IOP321_TICK_RATE);
-}
-
-struct sys_timer iop321_timer = {
-	.init		= iop3xx_timer_init,
-	.offset		= iop3xx_gettimeoffset,
-};
-
-#if defined(CONFIG_ARCH_IQ80321)
-MACHINE_START(IQ80321, "Intel IQ80321")
-	/* Maintainer: Intel Corporation */
-	.phys_io	= IQ80321_UART,
-	.io_pg_offst	= ((IQ80321_UART) >> 18) & 0xfffc,
-	.map_io		= iq80321_map_io,
-	.init_irq	= iop321_init_irq,
-	.timer		= &iop321_timer,
-	.boot_params	= 0xa0000100,
-	.init_machine	= iop32x_init,
-MACHINE_END
-#elif defined(CONFIG_ARCH_IQ31244)
-MACHINE_START(IQ31244, "Intel IQ31244")
-	/* Maintainer: Intel Corp. */
-	.phys_io	= IQ31244_UART,
-	.io_pg_offst	= ((IQ31244_UART) >> 18) & 0xfffc,
-	.map_io		= iq31244_map_io,
-	.init_irq	= iop321_init_irq,
-	.timer		= &iop321_timer,
-	.boot_params	= 0xa0000100,
-	.init_machine	= iop32x_init,
-MACHINE_END
-#else
-#error No machine descriptor defined for this IOP3XX implementation
-#endif