Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull first batch of arm-soc cleanups from Olof Johansson:
 "These cleanups are basically all over the place.  The idea is to
  collect changes with minimal impact but large number of changes so we
  can avoid them from distracting in the diffstat in the other series.

  A significant number of lines get removed here, in particular because
  the ixp2000 and ixp23xx platforms get removed.  These have never been
  extremely popular and have fallen into disuse over time with no active
  maintainer taking care of them.  The u5500 soc never made it into a
  product, so we are removing it from the ux500 platform.

  Many good cleanups also went into the at91 and omap platforms, as has
  been the case for a number of releases."

Trivial modify-delete conflicts in arch/arm/mach-{ixp2000,ixp23xx}

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (152 commits)
  ARM: clps711x: Cleanup IRQ handling
  ARM clps711x: Removed unused header mach/time.h
  ARM: clps711x: Added note about support EP731x CPU to Kconfig
  ARM: clps711x: Added missing register definitions
  ARM: clps711x: Used own subarch directory for store header file
  Dove: Fix Section mismatch warnings
  ARM: orion5x: ts78xx debugging changes
  ARM: orion5x: remove PM dependency from ts78xx
  ARM: orion5x: ts78xx fix NAND resource off by one
  ARM: orion5x: ts78xx whitespace cleanups
  Orion5x: Fix Section mismatch warnings
  Orion5x: Fix warning: struct pci_dev declared inside paramter list
  ARM: clps711x: Combine header files into one for clps711x-targets
  ARM: S3C24XX: Use common macro to define resources on mach-qt2410.c
  ARM: S3C24XX: Use common macro to define resources on mach-osiris.c
  ARM: EXYNOS: Adapt to cpuidle core time keeping and irq enable
  ARM: S5PV210: Use common macro to define resources on mach-smdkv210.c
  ARM: S5PV210: Use common macro to define resources on dev-audio.c
  ARM: S5PC100: Use common macro to define resources on dev-audio.c
  ARM: S5P64X0: Use common macro to define resources on dev-audio.c
  ...

1 files changed, 0 insertions, 295 deletions

diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
deleted file mode 100644
index 44378c31d17..00000000000
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/ixdp2800.c
- *
- * IXDP2800 platform support
- *
- * Original Author: Jeffrey Daly <jeffrey.daly@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/bitops.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/pci.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/arch.h>
-
-/*************************************************************************
- * IXDP2800 timer tick
- *************************************************************************/
-
-static void __init ixdp2800_timer_init(void)
-{
-	ixp2000_init_time(50000000);
-}
-
-static struct sys_timer ixdp2800_timer = {
-	.init		= ixdp2800_timer_init,
-	.offset		= ixp2000_gettimeoffset,
-};
-
-/*************************************************************************
- * IXDP2800 PCI
- *************************************************************************/
-static void __init ixdp2800_slave_disable_pci_master(void)
-{
-	*IXP2000_PCI_CMDSTAT &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-}
-
-static void __init ixdp2800_master_wait_for_slave(void)
-{
-	volatile u32 *addr;
-
-	printk(KERN_INFO "IXDP2800: waiting for slave NPU to configure "
-			 "its BAR sizes\n");
-
-	addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN,
-					PCI_BASE_ADDRESS_1);
-	do {
-		*addr = 0xffffffff;
-		cpu_relax();
-	} while (*addr != 0xfe000008);
-
-	addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN,
-					PCI_BASE_ADDRESS_2);
-	do {
-		*addr = 0xffffffff;
-		cpu_relax();
-	} while (*addr != 0xc0000008);
-
-	/*
-	 * Configure the slave's SDRAM BAR by hand.
-	 */
-	*addr = 0x40000008;
-}
-
-static void __init ixdp2800_slave_wait_for_master_enable(void)
-{
-	printk(KERN_INFO "IXDP2800: waiting for master NPU to enable us\n");
-
-	while ((*IXP2000_PCI_CMDSTAT & PCI_COMMAND_MASTER) == 0)
-		cpu_relax();
-}
-
-void __init ixdp2800_pci_preinit(void)
-{
-	printk("ixdp2x00_pci_preinit called\n");
-
-	*IXP2000_PCI_ADDR_EXT = 0x0001e000;
-
-	if (!ixdp2x00_master_npu())
-		ixdp2800_slave_disable_pci_master();
-
-	*IXP2000_PCI_SRAM_BASE_ADDR_MASK = (0x2000000 - 1) & ~0x3ffff;
-	*IXP2000_PCI_DRAM_BASE_ADDR_MASK = (0x40000000 - 1) & ~0xfffff;
-
-	ixp2000_pci_preinit();
-
-	if (ixdp2x00_master_npu()) {
-		/*
-		 * Wait until the slave set its SRAM/SDRAM BAR sizes
-		 * correctly before we proceed to scan and enumerate
-		 * the bus.
-		 */
-		ixdp2800_master_wait_for_slave();
-
-		/*
-		 * We configure the SDRAM BARs by hand because they
-		 * are 1G and fall outside of the regular allocated
-		 * PCI address space.
-		 */
-		*IXP2000_PCI_SDRAM_BAR = 0x00000008;
-	} else {
-		/*
-		 * Wait for the master to complete scanning the bus
-		 * and assigning resources before we proceed to scan
-		 * the bus ourselves.  Set pci=firmware to honor the
-		 * master's resource assignment.
-		 */
-		ixdp2800_slave_wait_for_master_enable();
-		pcibios_setup("firmware");
-	}
-}
-
-/*
- * We assign the SDRAM BARs for the two IXP2800 CPUs by hand, outside
- * of the regular PCI window, because there's only 512M of outbound PCI
- * memory window on each IXP, while we need 1G for each of the BARs.
- */
-static void __devinit ixp2800_pci_fixup(struct pci_dev *dev)
-{
-	if (machine_is_ixdp2800()) {
-		dev->resource[2].start = 0;
-		dev->resource[2].end   = 0;
-		dev->resource[2].flags = 0;
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IXP2800, ixp2800_pci_fixup);
-
-static int __init ixdp2800_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	sys->mem_offset = 0x00000000;
-
-	ixp2000_pci_setup(nr, sys);
-
-	return 1;
-}
-
-static int __init ixdp2800_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	if (ixdp2x00_master_npu()) {
-
-		/*
-		 * Root bus devices.  Slave NPU is only one with interrupt.
-		 * Everything else, we just return -1 which is invalid.
-		 */
-		if(!dev->bus->self) {
-			if(dev->devfn == IXDP2X00_SLAVE_NPU_DEVFN )
-				return IRQ_IXDP2800_INGRESS_NPU;
-
-			return -1;
-		}
-
-		/*
-		 * Bridge behind the PMC slot.
-		 */
-		if(dev->bus->self->devfn == IXDP2X00_PMC_DEVFN &&
-			dev->bus->parent->self->devfn == IXDP2X00_P2P_DEVFN &&
-			!dev->bus->parent->self->bus->parent)
-				  return IRQ_IXDP2800_PMC;
-
-		/*
-		 * Device behind the first bridge
-		 */
-		if(dev->bus->self->devfn == IXDP2X00_P2P_DEVFN) {
-			switch(dev->devfn) {
-				case IXDP2X00_PMC_DEVFN:
-					return IRQ_IXDP2800_PMC;	
-			
-				case IXDP2800_MASTER_ENET_DEVFN:
-					return IRQ_IXDP2800_EGRESS_ENET;
-
-				case IXDP2800_SWITCH_FABRIC_DEVFN:
-					return IRQ_IXDP2800_FABRIC;
-			}
-		}
-
-		return -1;
-	} else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */
-}
-
-static void __init ixdp2800_master_enable_slave(void)
-{
-	volatile u32 *addr;
-
-	printk(KERN_INFO "IXDP2800: enabling slave NPU\n");
-
-	addr = (volatile u32 *)ixp2000_pci_config_addr(0,
-					IXDP2X00_SLAVE_NPU_DEVFN,
-					PCI_COMMAND);
-
-	*addr |= PCI_COMMAND_MASTER;
-}
-
-static void __init ixdp2800_master_wait_for_slave_bus_scan(void)
-{
-	volatile u32 *addr;
-
-	printk(KERN_INFO "IXDP2800: waiting for slave to finish bus scan\n");
-
-	addr = (volatile u32 *)ixp2000_pci_config_addr(0,
-					IXDP2X00_SLAVE_NPU_DEVFN,
-					PCI_COMMAND);
-	while ((*addr & PCI_COMMAND_MEMORY) == 0)
-		cpu_relax();
-}
-
-static void __init ixdp2800_slave_signal_bus_scan_completion(void)
-{
-	printk(KERN_INFO "IXDP2800: bus scan done, signaling master\n");
-	*IXP2000_PCI_CMDSTAT |= PCI_COMMAND_MEMORY;
-}
-
-static void __init ixdp2800_pci_postinit(void)
-{
-	if (!ixdp2x00_master_npu()) {
-		ixdp2x00_slave_pci_postinit();
-		ixdp2800_slave_signal_bus_scan_completion();
-	}
-}
-
-struct __initdata hw_pci ixdp2800_pci __initdata = {
-	.nr_controllers	= 1,
-	.ops		= &ixp2000_pci_ops,
-	.setup		= ixdp2800_pci_setup,
-	.preinit	= ixdp2800_pci_preinit,
-	.postinit	= ixdp2800_pci_postinit,
-	.map_irq	= ixdp2800_pci_map_irq,
-};
-
-int __init ixdp2800_pci_init(void)
-{
-	if (machine_is_ixdp2800()) {
-		struct pci_dev *dev;
-
-		pci_common_init(&ixdp2800_pci);
-		if (ixdp2x00_master_npu()) {
-			dev = pci_get_bus_and_slot(1, IXDP2800_SLAVE_ENET_DEVFN);
-			pci_stop_and_remove_bus_device(dev);
-			pci_dev_put(dev);
-
-			ixdp2800_master_enable_slave();
-			ixdp2800_master_wait_for_slave_bus_scan();
-		} else {
-			dev = pci_get_bus_and_slot(1, IXDP2800_MASTER_ENET_DEVFN);
-			pci_stop_and_remove_bus_device(dev);
-			pci_dev_put(dev);
-		}
-	}
-
-	return 0;
-}
-
-subsys_initcall(ixdp2800_pci_init);
-
-void __init ixdp2800_init_irq(void)
-{
-	ixdp2x00_init_irq(IXDP2800_CPLD_INT_STAT, IXDP2800_CPLD_INT_MASK, IXDP2800_NR_IRQS);
-}
-
-MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform")
-	/* Maintainer: MontaVista Software, Inc. */
-	.atag_offset	= 0x100,
-	.map_io		= ixdp2x00_map_io,
-	.init_irq	= ixdp2800_init_irq,
-	.timer		= &ixdp2800_timer,
-	.init_machine	= ixdp2x00_init_machine,
-	.restart	= ixp2000_restart,
-MACHINE_END
-