Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (237 commits)
  ARM: 7004/1: fix traps.h compile warnings
  ARM: 6998/2: kernel: use proper memory barriers for bitops
  ARM: 6997/1: ep93xx: increase NR_BANKS to 16 for support of 128MB RAM
  ARM: Fix build errors caused by adding generic macros
  ARM: CPU hotplug: ensure we migrate all IRQs off a downed CPU
  ARM: CPU hotplug: pass in proper affinity mask on IRQ migration
  ARM: GIC: avoid routing interrupts to offline CPUs
  ARM: CPU hotplug: fix abuse of irqdesc->node
  ARM: 6981/2: mmci: adjust calculation of f_min
  ARM: 7000/1: LPAE: Use long long printk format for displaying the pud
  ARM: 6999/1: head, zImage: Always Enter the kernel in ARM state
  ARM: btc: avoid invalidating the branch target cache on kernel TLB maintanence
  ARM: ARM_DMA_ZONE_SIZE is no more
  ARM: mach-shark: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-sa1100: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-realview: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-pxa: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-ixp4xx: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-h720x: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-davinci: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ...

14 files changed, 54 insertions, 10 deletions

diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index 73745ff102d..ee19c1d383a 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -169,6 +169,9 @@ MACHINE_START(AVILA, "Gateworks Avila Network Platform")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= avila_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
 
  /*
@@ -184,6 +187,9 @@ MACHINE_START(LOFT, "Giant Shoulder Inc Loft board")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= avila_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
 #endif
 
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index e9a58939572..e2e98bbb641 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -316,6 +316,11 @@ static int abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *r
 }
 
 
+static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
+{
+	return (dma_addr + size) >= SZ_64M;
+}
+
 /*
  * Setup DMA mask to 64MB on PCI devices. Ignore all other devices.
  */
@@ -324,7 +329,7 @@ static int ixp4xx_pci_platform_notify(struct device *dev)
 	if(dev->bus == &pci_bus_type) {
 		*dev->dma_mask =  SZ_64M - 1;
 		dev->coherent_dma_mask = SZ_64M - 1;
-		dmabounce_register_dev(dev, 2048, 4096);
+		dmabounce_register_dev(dev, 2048, 4096, ixp4xx_needs_bounce);
 	}
 	return 0;
 }
@@ -337,11 +342,6 @@ static int ixp4xx_pci_platform_notify_remove(struct device *dev)
 	return 0;
 }
 
-int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
-{
-	return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M);
-}
-
 void __init ixp4xx_pci_preinit(void)
 {
 	unsigned long cpuid = read_cpuid_id();
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 355e3de3873..e24564b5d93 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -114,6 +114,9 @@ MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= coyote_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
 #endif
 
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index d398229cfaa..03e54515e8b 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -284,4 +284,7 @@ MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
 	.init_irq	= ixp4xx_init_irq,
 	.timer          = &dsmg600_timer,
 	.init_machine	= dsmg600_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 727ee39ce11..23a8b361456 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -275,5 +275,8 @@ MACHINE_START(FSG, "Freecom FSG-3")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= fsg_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
 
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index 9dc0b4eaa65..d4f851bdd9a 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -101,5 +101,8 @@ MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= gateway7001_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index 3e8c0e33b59..5f00ad224fe 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -501,4 +501,7 @@ MACHINE_START(GORAMO_MLR, "MultiLink")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= gmlr_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 77abead3622..3790dffd3c3 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -169,6 +169,9 @@ MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= gtwx5715_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
 
 
diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h
index 34e79404671..4caf1761f1e 100644
--- a/arch/arm/mach-ixp4xx/include/mach/memory.h
+++ b/arch/arm/mach-ixp4xx/include/mach/memory.h
@@ -14,8 +14,4 @@
  */
 #define PLAT_PHYS_OFFSET	UL(0x00000000)
 
-#ifdef CONFIG_PCI
-#define ARM_DMA_ZONE_SIZE	SZ_64M
-#endif
-
 #endif
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index dca4f7f9f4f..6a2927956bf 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -258,6 +258,9 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= ixdp425_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
 #endif
 
@@ -269,6 +272,9 @@ MACHINE_START(IXDP465, "Intel IXDP465 Development Platform")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= ixdp425_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
 #endif
 
@@ -280,6 +286,9 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= ixdp425_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
 #endif
 
@@ -291,5 +300,8 @@ MACHINE_START(KIXRP435, "Intel KIXRP435 Reference Platform")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= ixdp425_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index f18fee74887..afb51879d9a 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -319,4 +319,7 @@ MACHINE_START(NAS100D, "Iomega NAS 100d")
 	.init_irq	= ixp4xx_init_irq,
 	.timer          = &ixp4xx_timer,
 	.init_machine	= nas100d_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index f79b62eb761..69e40f2cf09 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -305,4 +305,7 @@ MACHINE_START(NSLU2, "Linksys NSLU2")
 	.init_irq	= ixp4xx_init_irq,
 	.timer          = &nslu2_timer,
 	.init_machine	= nslu2_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index 4e72cfdd3c4..045336c833a 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -241,4 +241,7 @@ MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= vulcan_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index 5d148c7bc4f..40b9fad800b 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -102,5 +102,8 @@ MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
 	.init_machine	= wg302v2_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
 MACHINE_END
 #endif