ARM: kirkwood: convert the mv88f6281gtw_ge board to DT

This commit converts the mv88f6281gtw_ge Kirkwood board to use a
Device Tree representation, except for the Ethernet devices and the
DSA switch. Even though the mv643xx_eth driver has a DT binding,
converting this board to use it is for now left on the side because it
doesn't use a simple PHY, but a DSA switch instead.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

1 files changed, 0 insertions, 172 deletions

diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
deleted file mode 100644
index ba384b992be..00000000000
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
- *
- * Marvell 88F6281 GTW GE Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/timer.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <net/dsa.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/pci.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_NONE,
-	.speed		= SPEED_1000,
-	.duplex		= DUPLEX_FULL,
-};
-
-static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = {
-	.port_names[0]	= "lan1",
-	.port_names[1]	= "lan2",
-	.port_names[2]	= "lan3",
-	.port_names[3]	= "lan4",
-	.port_names[4]	= "wan",
-	.port_names[5]	= "cpu",
-};
-
-static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = {
-	.nr_chips	= 1,
-	.chip		= &mv88f6281gtw_ge_switch_chip_data,
-};
-
-static const struct flash_platform_data mv88f6281gtw_ge_spi_slave_data = {
-	.type		= "mx25l12805d",
-};
-
-static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &mv88f6281gtw_ge_spi_slave_data,
-		.irq		= -1,
-		.max_speed_hz	= 50000000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-	},
-};
-
-static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = {
-	{
-		.code		= KEY_RESTART,
-		.gpio		= 47,
-		.desc		= "SWR Button",
-		.active_low	= 1,
-	}, {
-		.code		= KEY_WPS_BUTTON,
-		.gpio		= 46,
-		.desc		= "WPS Button",
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data mv88f6281gtw_ge_button_data = {
-	.buttons	= mv88f6281gtw_ge_button_pins,
-	.nbuttons	= ARRAY_SIZE(mv88f6281gtw_ge_button_pins),
-};
-
-static struct platform_device mv88f6281gtw_ge_buttons = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &mv88f6281gtw_ge_button_data,
-	},
-};
-
-static struct gpio_led mv88f6281gtw_ge_led_pins[] = {
-	{
-		.name		= "gtw:green:Status",
-		.gpio		= 20,
-		.active_low	= 0,
-	}, {
-		.name		= "gtw:red:Status",
-		.gpio		= 21,
-		.active_low	= 0,
-	}, {
-		.name		= "gtw:green:USB",
-		.gpio		= 12,
-		.active_low	= 0,
-	},
-};
-
-static struct gpio_led_platform_data mv88f6281gtw_ge_led_data = {
-	.leds		= mv88f6281gtw_ge_led_pins,
-	.num_leds	= ARRAY_SIZE(mv88f6281gtw_ge_led_pins),
-};
-
-static struct platform_device mv88f6281gtw_ge_leds = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &mv88f6281gtw_ge_led_data,
-	},
-};
-
-static unsigned int mv88f6281gtw_ge_mpp_config[] __initdata = {
-	MPP12_GPO,	/* Status#_USB pin  */
-	MPP20_GPIO,	/* Status#_GLED pin */
-	MPP21_GPIO,	/* Status#_RLED pin */
-	MPP46_GPIO,	/* WPS_Switch pin   */
-	MPP47_GPIO,	/* SW_Init pin      */
-	0
-};
-
-static void __init mv88f6281gtw_ge_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_init();
-	kirkwood_mpp_conf(mv88f6281gtw_ge_mpp_config);
-
-	kirkwood_ehci_init();
-	kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
-	kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ);
-	spi_register_board_info(mv88f6281gtw_ge_spi_slave_info,
-				ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info));
-	kirkwood_spi_init();
-	kirkwood_uart0_init();
-	platform_device_register(&mv88f6281gtw_ge_leds);
-	platform_device_register(&mv88f6281gtw_ge_buttons);
-}
-
-static int __init mv88f6281gtw_ge_pci_init(void)
-{
-	if (machine_is_mv88f6281gtw_ge())
-		kirkwood_pcie_init(KW_PCIE0);
-
-	return 0;
-}
-subsys_initcall(mv88f6281gtw_ge_pci_init);
-
-MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
-	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.atag_offset	= 0x100,
-	.init_machine	= mv88f6281gtw_ge_init,
-	.map_io		= kirkwood_map_io,
-	.init_early	= kirkwood_init_early,
-	.init_irq	= kirkwood_init_irq,
-	.init_time	= kirkwood_timer_init,
-	.restart	= kirkwood_restart,
-MACHINE_END