Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 128 insertions, 0 deletions

diff --git a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
new file mode 100644
index 00000000000..6262d449120
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
@@ -0,0 +1,128 @@
+/* arch/arm/mach-lh7a40x/irq-lpd7a40x.c
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *  Copyright (C) 2004 Logic Product Development
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+#include <asm/arch/irqs.h>
+
+
+static void lh7a40x_ack_cpld_irq (u32 irq)
+{
+	/* CPLD doesn't have ack capability */
+}
+
+static void lh7a40x_mask_cpld_irq (u32 irq)
+{
+	switch (irq) {
+	case IRQ_LPD7A40X_ETH_INT:
+		CPLD_INTERRUPTS = CPLD_INTERRUPTS | 0x4;
+		break;
+	case IRQ_LPD7A400_TS:
+		CPLD_INTERRUPTS = CPLD_INTERRUPTS | 0x8;
+		break;
+	}
+}
+
+static void lh7a40x_unmask_cpld_irq (u32 irq)
+{
+	switch (irq) {
+	case IRQ_LPD7A40X_ETH_INT:
+		CPLD_INTERRUPTS = CPLD_INTERRUPTS & ~ 0x4;
+		break;
+	case IRQ_LPD7A400_TS:
+		CPLD_INTERRUPTS = CPLD_INTERRUPTS & ~ 0x8;
+		break;
+	}
+}
+
+static struct irqchip lh7a40x_cpld_chip = {
+	.ack	= lh7a40x_ack_cpld_irq,
+	.mask	= lh7a40x_mask_cpld_irq,
+	.unmask	= lh7a40x_unmask_cpld_irq,
+};
+
+static void lh7a40x_cpld_handler (unsigned int irq, struct irqdesc *desc,
+				  struct pt_regs *regs)
+{
+	unsigned int mask = CPLD_INTERRUPTS;
+
+	desc->chip->ack (irq);
+
+	if ((mask & 0x1) == 0)	/* WLAN */
+		IRQ_DISPATCH (IRQ_LPD7A40X_ETH_INT);
+
+	if ((mask & 0x2) == 0)	/* Touch */
+		IRQ_DISPATCH (IRQ_LPD7A400_TS);
+
+	desc->chip->unmask (irq); /* Level-triggered need this */
+}
+
+
+  /* IRQ initialization */
+
+void __init lh7a40x_init_board_irq (void)
+{
+	int irq;
+
+		/* Rev A (v2.8): PF0, PF1, PF2, and PF3 are available IRQs.
+		                 PF7 supports the CPLD.
+		   Rev B (v3.4): PF0, PF1, and PF2 are available IRQs.
+		                 PF3 supports the CPLD.
+		   (Some) LPD7A404 prerelease boards report a version
+		   number of 0x16, but we force an override since the
+		   hardware is of the newer variety.
+		*/
+
+	unsigned char cpld_version = CPLD_REVISION;
+	int pinCPLD;
+
+#if defined CONFIG_MACH_LPD7A404
+	cpld_version = 0x34;	/* Override, for now */
+#endif
+	pinCPLD = (cpld_version == 0x28) ? 7 : 3;
+
+		/* First, configure user controlled GPIOF interrupts  */
+
+	GPIO_PFDD	&= ~0x0f; /* PF0-3 are inputs */
+	GPIO_INTTYPE1	&= ~0x0f; /* PF0-3 are level triggered */
+	GPIO_INTTYPE2	&= ~0x0f; /* PF0-3 are active low */
+	barrier ();
+	GPIO_GPIOFINTEN |=  0x0f; /* Enable PF0, PF1, PF2, and PF3 IRQs */
+
+		/* Then, configure CPLD interrupt */
+
+	CPLD_INTERRUPTS	=   0x0c; /* Disable all CPLD interrupts */
+	GPIO_PFDD	&= ~(1 << pinCPLD); /* Make input */
+	GPIO_INTTYPE1	|=  (1 << pinCPLD); /* Edge triggered */
+	GPIO_INTTYPE2	&= ~(1 << pinCPLD); /* Active low */
+	barrier ();
+	GPIO_GPIOFINTEN |=  (1 << pinCPLD); /* Enable */
+
+		/* Cascade CPLD interrupts */
+
+	for (irq = IRQ_BOARD_START;
+	     irq < IRQ_BOARD_START + NR_IRQ_BOARD; ++irq) {
+		set_irq_chip (irq, &lh7a40x_cpld_chip);
+		set_irq_handler (irq, do_edge_IRQ);
+		set_irq_flags (irq, IRQF_VALID);
+	}
+
+	set_irq_chained_handler ((cpld_version == 0x28)
+				 ? IRQ_CPLD_V28
+				 : IRQ_CPLD_V34,
+				 lh7a40x_cpld_handler);
+}