Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (422 commits)
  [ARM] 5435/1: fix compile warning in sanity_check_meminfo()
  [ARM] 5434/1: ARM: OMAP: Fix mailbox compile for 24xx
  [ARM] pxa: fix the bad assumption that PCMCIA sockets always start with 0
  [ARM] pxa: fix Colibri PXA300 and PXA320 LCD backlight pins
  imxfb: Fix TFT mode
  i.MX21/27: remove ifdef CONFIG_FB_IMX
  imxfb: add clock support
  mxc: add arch_reset() function
  clkdev: add possibility to get a clock based on the device name
  i.MX1: remove fb support from mach-imx
  [ARM] pxa: build arch/arm/plat-pxa/mfp.c only when PXA3xx or ARCH_MMP defined
  Gemini: Add support for Teltonika RUT100
  Gemini: gpiolib based GPIO support v2
  MAINTAINERS: add myself as Gemini architecture maintainer
  ARM: Add Gemini architecture v3
  [ARM] OMAP: Fix compile for omap2_init_common_hw()
  MAINTAINERS: Add myself as Faraday ARM core variant maintainer
  ARM: Add support for FA526 v2
  [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h
  [ARM] collie: fix two minor formatting nits
  ...

1 files changed, 117 insertions, 0 deletions

diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
new file mode 100644
index 00000000000..4562452d407
--- /dev/null
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -0,0 +1,117 @@
+/*
+ *  linux/arch/arm/mach-mmp/aspenite.c
+ *
+ *  Support for the Marvell PXA168-based Aspenite and Zylonite2
+ *  Development Platform.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-pxa168.h>
+#include <mach/pxa168.h>
+#include <mach/gpio.h>
+
+#include "common.h"
+
+static unsigned long common_pin_config[] __initdata = {
+	/* Data Flash Interface */
+	GPIO0_DFI_D15,
+	GPIO1_DFI_D14,
+	GPIO2_DFI_D13,
+	GPIO3_DFI_D12,
+	GPIO4_DFI_D11,
+	GPIO5_DFI_D10,
+	GPIO6_DFI_D9,
+	GPIO7_DFI_D8,
+	GPIO8_DFI_D7,
+	GPIO9_DFI_D6,
+	GPIO10_DFI_D5,
+	GPIO11_DFI_D4,
+	GPIO12_DFI_D3,
+	GPIO13_DFI_D2,
+	GPIO14_DFI_D1,
+	GPIO15_DFI_D0,
+
+	/* Static Memory Controller */
+	GPIO18_SMC_nCS0,
+	GPIO34_SMC_nCS1,
+	GPIO23_SMC_nLUA,
+	GPIO25_SMC_nLLA,
+	GPIO28_SMC_RDY,
+	GPIO29_SMC_SCLK,
+	GPIO35_SMC_BE1,
+	GPIO36_SMC_BE2,
+	GPIO27_GPIO,	/* Ethernet IRQ */
+
+	/* UART1 */
+	GPIO107_UART1_RXD,
+	GPIO108_UART1_TXD,
+};
+
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= SMC_CS1_PHYS_BASE + 0x300,
+		.end	= SMC_CS1_PHYS_BASE + 0xfffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gpio_to_irq(27),
+		.end	= gpio_to_irq(27),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &smc91x_info,
+	},
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static void __init common_init(void)
+{
+	mfp_config(ARRAY_AND_SIZE(common_pin_config));
+
+	/* on-chip devices */
+	pxa168_add_uart(1);
+
+	/* off-chip devices */
+	platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
+	.phys_io        = APB_PHYS_BASE,
+	.boot_params    = 0x00000100,
+	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq       = pxa168_init_irq,
+	.timer          = &pxa168_timer,
+	.init_machine   = common_init,
+MACHINE_END
+
+MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
+	.phys_io        = APB_PHYS_BASE,
+	.boot_params    = 0x00000100,
+	.io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq       = pxa168_init_irq,
+	.timer          = &pxa168_timer,
+	.init_machine   = common_init,
+MACHINE_END