Merge tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late changes from Arnd Bergmann:
 "These are changes that arrived a little late before the merge window
  or that have multiple dependencies on previous branches so they did
  not fit into one of the earlier ones.  There are 10 branches merged
  here, a total of 39 non-merge commits.  Contents are a mixed bag for
  the above reasons:

   * Two new SoC platforms: ST microelectronics stixxxx and the TI
     'Nspire' graphing calculator.  These should have been in the 'soc'
     branch but were a little late
   * Support for the Exynos 5420 variant in mach-exynos, which is based
     on the other exynos branches to avoid conflicts.
   * Various small changes for sh-mobile, ux500 and davinci
   * Common clk support for MSM"

* tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
  ARM: ux500: bail out on alien cpus
  ARM: davinci: da850: adopt to pinctrl-single change for configuring multiple pins
  serial: sh-sci: Initialise variables before access in sci_set_termios()
  ARM: stih41x: Add B2020 board support
  ARM: stih41x: Add B2000 board support
  ARM: sti: Add DEBUG_LL console support
  ARM: sti: Add STiH416 SOC support
  ARM: sti: Add STiH415 SOC support
  ARM: msm: Migrate to common clock framework
  ARM: msm: Make proc_comm clock control into a platform driver
  ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver
  ARM: msm: Remove clock-7x30.h include file
  ARM: msm: Remove custom clk_set_{max,min}_rate() API
  ARM: msm: Remove custom clk_set_flags() API
  msm: iommu: Use clk_set_rate() instead of clk_set_min_rate()
  msm: iommu: Convert to clk_prepare/unprepare
  msm_sdcc: Convert to clk_prepare/unprepare
  usb: otg: msm: Convert to clk_prepare/unprepare
  msm_serial: Use devm_clk_get() and properly return errors
  msm_serial: Convert to clk_prepare/unprepare
  ...

1 files changed, 0 insertions, 155 deletions

diff --git a/arch/arm/mach-msm/clock-7x30.h b/arch/arm/mach-msm/clock-7x30.h
deleted file mode 100644
index 14104453688..00000000000
--- a/arch/arm/mach-msm/clock-7x30.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/* Copyright (c) 2009, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_CLOCK_7X30_H
-#define __ARCH_ARM_MACH_MSM_CLOCK_7X30_H
-
-enum {
-	L_7X30_NONE_CLK = -1,
-	L_7X30_ADM_CLK,
-	L_7X30_I2C_CLK,
-	L_7X30_I2C_2_CLK,
-	L_7X30_QUP_I2C_CLK,
-	L_7X30_UART1DM_CLK,
-	L_7X30_UART1DM_P_CLK,
-	L_7X30_UART2DM_CLK,
-	L_7X30_UART2DM_P_CLK,
-	L_7X30_EMDH_CLK,
-	L_7X30_EMDH_P_CLK,
-	L_7X30_PMDH_CLK,
-	L_7X30_PMDH_P_CLK,
-	L_7X30_GRP_2D_CLK,
-	L_7X30_GRP_2D_P_CLK,
-	L_7X30_GRP_3D_SRC_CLK,
-	L_7X30_GRP_3D_CLK,
-	L_7X30_GRP_3D_P_CLK,
-	L_7X30_IMEM_CLK,
-	L_7X30_SDC1_CLK,
-	L_7X30_SDC1_P_CLK,
-	L_7X30_SDC2_CLK,
-	L_7X30_SDC2_P_CLK,
-	L_7X30_SDC3_CLK,
-	L_7X30_SDC3_P_CLK,
-	L_7X30_SDC4_CLK,
-	L_7X30_SDC4_P_CLK,
-	L_7X30_MDP_CLK,
-	L_7X30_MDP_P_CLK,
-	L_7X30_MDP_LCDC_PCLK_CLK,
-	L_7X30_MDP_LCDC_PAD_PCLK_CLK,
-	L_7X30_MDP_VSYNC_CLK,
-	L_7X30_MI2S_CODEC_RX_M_CLK,
-	L_7X30_MI2S_CODEC_RX_S_CLK,
-	L_7X30_MI2S_CODEC_TX_M_CLK,
-	L_7X30_MI2S_CODEC_TX_S_CLK,
-	L_7X30_MI2S_M_CLK,
-	L_7X30_MI2S_S_CLK,
-	L_7X30_LPA_CODEC_CLK,
-	L_7X30_LPA_CORE_CLK,
-	L_7X30_LPA_P_CLK,
-	L_7X30_MIDI_CLK,
-	L_7X30_MDC_CLK,
-	L_7X30_ROTATOR_IMEM_CLK,
-	L_7X30_ROTATOR_P_CLK,
-	L_7X30_SDAC_M_CLK,
-	L_7X30_SDAC_CLK,
-	L_7X30_UART1_CLK,
-	L_7X30_UART2_CLK,
-	L_7X30_UART3_CLK,
-	L_7X30_TV_CLK,
-	L_7X30_TV_DAC_CLK,
-	L_7X30_TV_ENC_CLK,
-	L_7X30_HDMI_CLK,
-	L_7X30_TSIF_REF_CLK,
-	L_7X30_TSIF_P_CLK,
-	L_7X30_USB_HS_SRC_CLK,
-	L_7X30_USB_HS_CLK,
-	L_7X30_USB_HS_CORE_CLK,
-	L_7X30_USB_HS_P_CLK,
-	L_7X30_USB_HS2_CLK,
-	L_7X30_USB_HS2_CORE_CLK,
-	L_7X30_USB_HS2_P_CLK,
-	L_7X30_USB_HS3_CLK,
-	L_7X30_USB_HS3_CORE_CLK,
-	L_7X30_USB_HS3_P_CLK,
-	L_7X30_VFE_CLK,
-	L_7X30_VFE_P_CLK,
-	L_7X30_VFE_MDC_CLK,
-	L_7X30_VFE_CAMIF_CLK,
-	L_7X30_CAMIF_PAD_P_CLK,
-	L_7X30_CAM_M_CLK,
-	L_7X30_JPEG_CLK,
-	L_7X30_JPEG_P_CLK,
-	L_7X30_VPE_CLK,
-	L_7X30_MFC_CLK,
-	L_7X30_MFC_DIV2_CLK,
-	L_7X30_MFC_P_CLK,
-	L_7X30_SPI_CLK,
-	L_7X30_SPI_P_CLK,
-	L_7X30_CSI0_CLK,
-	L_7X30_CSI0_VFE_CLK,
-	L_7X30_CSI0_P_CLK,
-	L_7X30_CSI1_CLK,
-	L_7X30_CSI1_VFE_CLK,
-	L_7X30_CSI1_P_CLK,
-	L_7X30_GLBL_ROOT_CLK,
-
-	L_7X30_AXI_LI_VG_CLK,
-	L_7X30_AXI_LI_GRP_CLK,
-	L_7X30_AXI_LI_JPEG_CLK,
-	L_7X30_AXI_GRP_2D_CLK,
-	L_7X30_AXI_MFC_CLK,
-	L_7X30_AXI_VPE_CLK,
-	L_7X30_AXI_LI_VFE_CLK,
-	L_7X30_AXI_LI_APPS_CLK,
-	L_7X30_AXI_MDP_CLK,
-	L_7X30_AXI_IMEM_CLK,
-	L_7X30_AXI_LI_ADSP_A_CLK,
-	L_7X30_AXI_ROTATOR_CLK,
-
-	L_7X30_NR_CLKS
-};
-
-struct clk_ops;
-extern struct clk_ops clk_ops_7x30;
-
-struct clk_ops *clk_7x30_is_local(uint32_t id);
-int clk_7x30_init(void);
-
-void pll_enable(uint32_t pll);
-void pll_disable(uint32_t pll);
-
-extern int internal_pwr_rail_ctl_auto(unsigned rail_id, bool enable);
-
-#define CLK_7X30(clk_name, clk_id, clk_dev, clk_flags) {	\
-	.con_id = clk_name, \
-	.dev_id = clk_dev, \
-	.clk = &(struct clk){ \
-		.id = L_7X30_##clk_id, \
-		.remote_id = P_##clk_id, \
-		.flags = clk_flags, \
-		.dbg_name = #clk_id, \
-	}, \
-	}
-
-#define CLK_7X30S(clk_name, l_id, r_id, clk_dev, clk_flags) {	\
-	.con_id = clk_name, \
-	.dev_id = clk_dev, \
-	.clk = &(struct clk){ \
-		.id = L_7X30_##l_id, \
-		.remote_id = P_##r_id, \
-		.flags = clk_flags, \
-		.dbg_name = #l_id, \
-		.ops = &clk_ops_pcom, \
-	}, \
-	}
-
-#endif