Merge commit 'v2.6.37-rc2' into upstream/xenfs

* commit 'v2.6.37-rc2': (10093 commits)
  Linux 2.6.37-rc2
  capabilities/syslog: open code cap_syslog logic to fix build failure
  i2c: Sanity checks on adapter registration
  i2c: Mark i2c_adapter.id as deprecated
  i2c: Drivers shouldn't include <linux/i2c-id.h>
  i2c: Delete unused adapter IDs
  i2c: Remove obsolete cleanup for clientdata
  include/linux/kernel.h: Move logging bits to include/linux/printk.h
  Fix gcc 4.5.1 miscompiling drivers/char/i8k.c (again)
  hwmon: (w83795) Check for BEEP pin availability
  hwmon: (w83795) Clear intrusion alarm immediately
  hwmon: (w83795) Read the intrusion state properly
  hwmon: (w83795) Print the actual temperature channels as sources
  hwmon: (w83795) List all usable temperature sources
  hwmon: (w83795) Expose fan control method
  hwmon: (w83795) Fix fan control mode attributes
  hwmon: (lm95241) Check validity of input values
  hwmon: Change mail address of Hans J. Koch
  PCI: sysfs: fix printk warnings
  GFS2: Fix inode deallocation race
  ...

1 files changed, 88 insertions, 0 deletions

diff --git a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
new file mode 100644
index 00000000000..4dc99aa65d0
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
@@ -0,0 +1,88 @@
+/*
+ * Low-level IRQ helper macros
+ *
+ * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =gic_cpu_base_addr
+	ldr	\base, [\base]
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	/*
+	 * The interrupt numbering scheme is defined in the
+	 * interrupt controller spec.  To wit:
+	 *
+	 * Migrated the code from ARM MP port to be more consistant
+	 * with interrupt processing , the following still holds true
+	 * however, all interrupts are treated the same regardless of
+	 * if they are local IPI or PPI
+	 *
+	 * Interrupts 0-15 are IPI
+	 * 16-31 are PPI
+	 *   (16-18 are the timers)
+	 * 32-1020 are global
+	 * 1021-1022 are reserved
+	 * 1023 is "spurious" (no interrupt)
+	 *
+	 * A simple read from the controller will tell us the number of the
+	 * highest priority enabled interrupt.  We then just need to check
+	 * whether it is in the valid range for an IRQ (0-1020 inclusive).
+	 *
+	 * Base ARM code assumes that the local (private) peripheral interrupts
+	 * are not valid, we treat them differently, in that the privates are
+	 * handled like normal shared interrupts with the exception that only
+	 * one processor can register the interrupt and the handler must be
+	 * the same for all processors.
+	 */
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	ldr  \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 =srcCPU,
+						   9-0 =int # */
+
+	bic     \irqnr, \irqstat, #0x1c00	@mask src
+	cmp     \irqnr, #15
+	ldr		\tmp, =1021
+	cmpcc	\irqnr, \irqnr
+	cmpne	\irqnr, \tmp
+	cmpcs	\irqnr, \irqnr
+
+	.endm
+
+	/* We assume that irqstat (the raw value of the IRQ acknowledge
+	 * register) is preserved from the macro above.
+	 * If there is an IPI, we immediately signal end of interrupt on the
+	 * controller, since this requires the original irqstat value which
+	 * we won't easily be able to recreate later.
+	 */
+	.macro test_for_ipi, irqnr, irqstat, base, tmp
+    bic \irqnr, \irqstat, #0x1c00
+    cmp \irqnr, #16
+    strcc   \irqstat, [\base, #GIC_CPU_EOI]
+    cmpcs   \irqnr, \irqnr
+	.endm
+
+	/* As above, this assumes that irqstat and base are preserved.. */
+
+	.macro test_for_ltirq, irqnr, irqstat, base, tmp
+    bic \irqnr, \irqstat, #0x1c00
+    mov     \tmp, #0
+    cmp \irqnr, #16
+    moveq   \tmp, #1
+    streq   \irqstat, [\base, #GIC_CPU_EOI]
+    cmp \tmp, #0
+	.endm