arm: msm: smd: use either package v3 or v4 not both

This modifies SMD to use either the package v3 or package v4,
but not both. The current code tries to allocate as v4 on all
system which can produce a scary looking error message on boot up,

smem_find(16, 40): wrong size 16424
smd_alloc_channel() cid=02 size=08192 'SMD_RPCCALL'

With this error the code then falls back on the package v3 allocation
method. This method is inefficient because it causes a slow down
on some systems even when the allocation method can be determined
at compile time. It also causes a kernel size increase that effects
all system and is not needed.

This change corrects the allocation to use one method or the other
and not both.

Signed-off-by: Daniel Walker <c_dwalke@quicinc.com>

1 files changed, 56 insertions, 2 deletions

diff --git a/arch/arm/mach-msm/smd_private.h b/arch/arm/mach-msm/smd_private.h
index 33a33f1b01f..3d337ce35a6 100644
--- a/arch/arm/mach-msm/smd_private.h
+++ b/arch/arm/mach-msm/smd_private.h
@@ -61,7 +61,7 @@ struct smem_shared {
 #define SMSM_V1_SIZE		(sizeof(unsigned) * 8)
 #define SMSM_V2_SIZE		(sizeof(unsigned) * 4)
 
-#ifndef CONFIG_ARCH_MSM_SCORPION
+#ifdef CONFIG_MSM_SMD_PKG3
 struct smsm_interrupt_info {
 	uint32_t interrupt_mask;
 	uint32_t pending_interrupts;
@@ -123,7 +123,7 @@ struct msm_dem_slave_data {
 #define SMSM_WKUP_REASON_ALARM	0x00000010
 #define SMSM_WKUP_REASON_RESET	0x00000020
 
-#ifndef CONFIG_ARCH_MSM_SCORPION
+#ifdef CONFIG_ARCH_MSM7X00A
 enum smsm_state_item {
 	SMSM_STATE_APPS = 1,
 	SMSM_STATE_MODEM = 3,
@@ -265,6 +265,7 @@ struct smd_half_channel {
 	unsigned head;
 } __attribute__(( aligned(4), packed ));
 
+/* Only used on SMD package v3 on msm7201a */
 struct smd_shared_v1 {
 	struct smd_half_channel ch0;
 	unsigned char data0[SMD_BUF_SIZE];
@@ -272,6 +273,7 @@ struct smd_shared_v1 {
 	unsigned char data1[SMD_BUF_SIZE];
 };
 
+/* Used on SMD package v4 */
 struct smd_shared_v2 {
 	struct smd_half_channel ch0;
 	struct smd_half_channel ch1;
@@ -330,4 +332,56 @@ uint32_t raw_smsm_get_state(enum smsm_state_item item);
 
 extern void msm_init_last_radio_log(struct module *);
 
+#ifdef CONFIG_MSM_SMD_PKG3
+/*
+ * This allocator assumes an SMD Package v3 which only exists on
+ * MSM7x00 SoC's.
+ */
+static inline int _smd_alloc_channel(struct smd_channel *ch)
+{
+	struct smd_shared_v1 *shared1;
+
+	shared1 = smem_alloc(ID_SMD_CHANNELS + ch->n, sizeof(*shared1));
+	if (!shared1) {
+		pr_err("smd_alloc_channel() cid %d does not exist\n", ch->n);
+		return -1;
+	}
+	ch->send = &shared1->ch0;
+	ch->recv = &shared1->ch1;
+	ch->send_data = shared1->data0;
+	ch->recv_data = shared1->data1;
+	ch->fifo_size = SMD_BUF_SIZE;
+	return 0;
+}
+#else
+/*
+ * This allocator assumes an SMD Package v4, the most common
+ * and the default.
+ */
+static inline int _smd_alloc_channel(struct smd_channel *ch)
+{
+	struct smd_shared_v2 *shared2;
+	void *buffer;
+	unsigned buffer_sz;
+
+	shared2 = smem_alloc(SMEM_SMD_BASE_ID + ch->n, sizeof(*shared2));
+	buffer = smem_item(SMEM_SMD_FIFO_BASE_ID + ch->n, &buffer_sz);
+
+	if (!buffer)
+		return -1;
+
+	/* buffer must be a power-of-two size */
+	if (buffer_sz & (buffer_sz - 1))
+		return -1;
+
+	buffer_sz /= 2;
+	ch->send = &shared2->ch0;
+	ch->recv = &shared2->ch1;
+	ch->send_data = buffer;
+	ch->recv_data = buffer + buffer_sz;
+	ch->fifo_size = buffer_sz;
+	return 0;
+}
+#endif /* CONFIG_MSM_SMD_PKG3 */
+
 #endif