diff options
author | H. Peter Anvin <hpa@linux.intel.com> | 2012-10-19 07:54:24 -0700 |
---|---|---|
committer | H. Peter Anvin <hpa@linux.intel.com> | 2012-10-19 07:55:09 -0700 |
commit | 4533d86270d7986e00594495dde9a109d6be27ae (patch) | |
tree | c2473cac653f7b98e5bd5e6475e63734be4b7644 /arch/arm/mach-msm | |
parent | 21c5e50e15b1abd797e62f18fd7f90b9cc004cbd (diff) | |
parent | 5bc66170dc486556a1e36fd384463536573f4b82 (diff) |
Merge commit '5bc66170dc486556a1e36fd384463536573f4b82' into x86/urgent
From Borislav Petkov <bp@amd64.org>:
Below is a RAS fix which reverts the addition of a sysfs attribute
which we agreed is not needed, post-factum. And this should go in now
because that sysfs attribute is going to end up in 3.7 otherwise and
thus exposed to userspace; removing it then would be a lot harder.
This is done as a merge rather than a simple patch/cherry-pick since
the baseline for this patch was not in the previous x86/urgent.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Diffstat (limited to 'arch/arm/mach-msm')
43 files changed, 399 insertions, 1598 deletions
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 1cd40ad301d..b61908594b4 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -1,64 +1,67 @@ if ARCH_MSM +comment "Qualcomm MSM SoC Type" + depends on (ARCH_MSM8X60 || ARCH_MSM8960) + choice prompt "Qualcomm MSM SoC Type" default ARCH_MSM7X00A + depends on !(ARCH_MSM8X60 || ARCH_MSM8960) config ARCH_MSM7X00A bool "MSM7x00A / MSM7x01A" - select MACH_TROUT if !MACH_HALIBUT select ARCH_MSM_ARM11 - select MSM_SMD - select MSM_SMD_PKG3 select CPU_V6 select GPIO_MSM_V1 + select MACH_TROUT if !MACH_HALIBUT select MSM_PROC_COMM + select MSM_SMD + select MSM_SMD_PKG3 config ARCH_MSM7X30 bool "MSM7x30" - select MACH_MSM7X30_SURF # if ! select ARCH_MSM_SCORPION - select MSM_SMD - select MSM_VIC select CPU_V7 - select MSM_GPIOMUX select GPIO_MSM_V1 + select MACH_MSM7X30_SURF # if ! + select MSM_GPIOMUX select MSM_PROC_COMM + select MSM_SMD + select MSM_VIC config ARCH_QSD8X50 bool "QSD8X50" - select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5 select ARCH_MSM_SCORPION - select MSM_SMD - select MSM_VIC select CPU_V7 - select MSM_GPIOMUX select GPIO_MSM_V1 + select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5 + select MSM_GPIOMUX select MSM_PROC_COMM + select MSM_SMD + select MSM_VIC + +endchoice config ARCH_MSM8X60 bool "MSM8X60" - select MACH_MSM8X60_SURF if (!MACH_MSM8X60_RUMI3 && !MACH_MSM8X60_SIM \ - && !MACH_MSM8X60_FFA) select ARCH_MSM_SCORPIONMP select ARM_GIC select CPU_V7 - select MSM_V2_TLMM select GPIO_MSM_V2 select MSM_GPIOMUX select MSM_SCM if SMP + select MSM_V2_TLMM + select USE_OF config ARCH_MSM8960 bool "MSM8960" select ARCH_MSM_SCORPIONMP - select MACH_MSM8960_SIM if (!MACH_MSM8960_RUMI3) select ARM_GIC select CPU_V7 - select MSM_V2_TLMM select MSM_GPIOMUX select MSM_SCM if SMP - -endchoice + select MSM_V2_TLMM + select USE_OF config MSM_HAS_DEBUG_UART_HS bool @@ -107,47 +110,11 @@ config MACH_QSD8X50_SURF config MACH_QSD8X50A_ST1_5 depends on ARCH_QSD8X50 - select MSM_SOC_REV_A bool "QSD8x50A ST1.5" + select MSM_SOC_REV_A help Support for the Qualcomm ST1.5. -config MACH_MSM8X60_RUMI3 - depends on ARCH_MSM8X60 - bool "MSM8x60 RUMI3" - help - Support for the Qualcomm MSM8x60 RUMI3 emulator. - -config MACH_MSM8X60_SURF - depends on ARCH_MSM8X60 - bool "MSM8x60 SURF" - help - Support for the Qualcomm MSM8x60 SURF eval board. - -config MACH_MSM8X60_SIM - depends on ARCH_MSM8X60 - bool "MSM8x60 Simulator" - help - Support for the Qualcomm MSM8x60 simulator. - -config MACH_MSM8X60_FFA - depends on ARCH_MSM8X60 - bool "MSM8x60 FFA" - help - Support for the Qualcomm MSM8x60 FFA eval board. - -config MACH_MSM8960_SIM - depends on ARCH_MSM8960 - bool "MSM8960 Simulator" - help - Support for the Qualcomm MSM8960 simulator. - -config MACH_MSM8960_RUMI3 - depends on ARCH_MSM8960 - bool "MSM8960 RUMI3" - help - Support for the Qualcomm MSM8960 RUMI3 emulator. - endmenu config MSM_SMD_PKG3 diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 4ad3969b988..17519faf082 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -1,11 +1,11 @@ -obj-y += io.o idle.o timer.o +obj-y += io.o timer.o obj-y += clock.o obj-$(CONFIG_DEBUG_FS) += clock-debug.o obj-$(CONFIG_MSM_VIC) += irq-vic.o obj-$(CONFIG_MSM_IOMMU) += devices-iommu.o -obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o acpuclock-arm11.o +obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o obj-$(CONFIG_ARCH_MSM7X30) += dma.o obj-$(CONFIG_ARCH_QSD8X50) += dma.o sirc.o @@ -25,8 +25,8 @@ obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o b obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o -obj-$(CONFIG_ARCH_MSM8X60) += board-msm8x60.o -obj-$(CONFIG_ARCH_MSM8960) += board-msm8960.o devices-msm8960.o +obj-$(CONFIG_ARCH_MSM8X60) += board-dt-8660.o +obj-$(CONFIG_ARCH_MSM8960) += board-dt-8960.o obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-v1.o gpiomux.o obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o diff --git a/arch/arm/mach-msm/acpuclock-arm11.c b/arch/arm/mach-msm/acpuclock-arm11.c deleted file mode 100644 index 805d4ee53f7..00000000000 --- a/arch/arm/mach-msm/acpuclock-arm11.c +++ /dev/null @@ -1,525 +0,0 @@ -/* arch/arm/mach-msm/acpuclock.c - * - * MSM architecture clock driver - * - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2007 QUALCOMM Incorporated - * Author: San Mehat <san@android.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/cpufreq.h> -#include <linux/mutex.h> -#include <linux/io.h> -#include <mach/board.h> -#include <mach/msm_iomap.h> - -#include "proc_comm.h" -#include "acpuclock.h" - - -#define A11S_CLK_CNTL_ADDR (MSM_CSR_BASE + 0x100) -#define A11S_CLK_SEL_ADDR (MSM_CSR_BASE + 0x104) -#define A11S_VDD_SVS_PLEVEL_ADDR (MSM_CSR_BASE + 0x124) - -/* - * ARM11 clock configuration for specific ACPU speeds - */ - -#define ACPU_PLL_TCXO -1 -#define ACPU_PLL_0 0 -#define ACPU_PLL_1 1 -#define ACPU_PLL_2 2 -#define ACPU_PLL_3 3 - -#define PERF_SWITCH_DEBUG 0 -#define PERF_SWITCH_STEP_DEBUG 0 - -struct clock_state -{ - struct clkctl_acpu_speed *current_speed; - struct mutex lock; - uint32_t acpu_switch_time_us; - uint32_t max_speed_delta_khz; - uint32_t vdd_switch_time_us; - unsigned long power_collapse_khz; - unsigned long wait_for_irq_khz; -}; - -static struct clk *ebi1_clk; -static struct clock_state drv_state = { 0 }; - -static void __init acpuclk_init(void); - -/* MSM7201A Levels 3-6 all correspond to 1.2V, level 7 corresponds to 1.325V. */ -enum { - VDD_0 = 0, - VDD_1 = 1, - VDD_2 = 2, - VDD_3 = 3, - VDD_4 = 3, - VDD_5 = 3, - VDD_6 = 3, - VDD_7 = 7, - VDD_END -}; - -struct clkctl_acpu_speed { - unsigned int a11clk_khz; - int pll; - unsigned int a11clk_src_sel; - unsigned int a11clk_src_div; - unsigned int ahbclk_khz; - unsigned int ahbclk_div; - int vdd; - unsigned int axiclk_khz; - unsigned long lpj; /* loops_per_jiffy */ -/* Index in acpu_freq_tbl[] for steppings. */ - short down; - short up; -}; - -/* - * ACPU speed table. Complete table is shown but certain speeds are commented - * out to optimized speed switching. Initialize loops_per_jiffy to 0. - * - * Table stepping up/down is optimized for 256mhz jumps while staying on the - * same PLL. - */ -#if (0) -static struct clkctl_acpu_speed acpu_freq_tbl[] = { - { 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 8 }, - { 61440, ACPU_PLL_0, 4, 3, 61440, 0, VDD_0, 30720, 0, 0, 8 }, - { 81920, ACPU_PLL_0, 4, 2, 40960, 1, VDD_0, 61440, 0, 0, 8 }, - { 96000, ACPU_PLL_1, 1, 7, 48000, 1, VDD_0, 61440, 0, 0, 9 }, - { 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_3, 61440, 0, 0, 8 }, - { 128000, ACPU_PLL_1, 1, 5, 64000, 1, VDD_3, 61440, 0, 0, 12 }, - { 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_3, 61440, 0, 0, 11 }, - { 192000, ACPU_PLL_1, 1, 3, 64000, 2, VDD_3, 61440, 0, 0, 12 }, - { 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_4, 61440, 0, 0, 12 }, - { 256000, ACPU_PLL_1, 1, 2, 128000, 2, VDD_5, 128000, 0, 0, 12 }, - { 264000, ACPU_PLL_2, 2, 3, 88000, 2, VDD_5, 128000, 0, 6, 13 }, - { 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_5, 128000, 0, 6, 13 }, - { 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 5, -1 }, - { 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 11, -1 }, - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, -}; -#else /* Table of freq we currently use. */ -static struct clkctl_acpu_speed acpu_freq_tbl[] = { - { 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 4 }, - { 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_3, 61440, 0, 0, 4 }, - { 128000, ACPU_PLL_1, 1, 5, 64000, 1, VDD_3, 61440, 0, 0, 6 }, - { 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_3, 61440, 0, 0, 5 }, - { 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_4, 61440, 0, 0, 5 }, - { 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_5, 128000, 0, 3, 7 }, - { 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 2, -1 }, - { 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 5, -1 }, - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, -}; -#endif - - -#ifdef CONFIG_CPU_FREQ_TABLE -static struct cpufreq_frequency_table freq_table[] = { - { 0, 122880 }, - { 1, 128000 }, - { 2, 245760 }, - { 3, 384000 }, - { 4, 528000 }, - { 5, CPUFREQ_TABLE_END }, -}; -#endif - -static int pc_pll_request(unsigned id, unsigned on) -{ - int res; - on = !!on; - -#if PERF_SWITCH_DEBUG - if (on) - printk(KERN_DEBUG "Enabling PLL %d\n", id); - else - printk(KERN_DEBUG "Disabling PLL %d\n", id); -#endif - - res = msm_proc_comm(PCOM_CLKCTL_RPC_PLL_REQUEST, &id, &on); - if (res < 0) - return res; - -#if PERF_SWITCH_DEBUG - if (on) - printk(KERN_DEBUG "PLL %d enabled\n", id); - else - printk(KERN_DEBUG "PLL %d disabled\n", id); -#endif - return res; -} - - -/*---------------------------------------------------------------------------- - * ARM11 'owned' clock control - *---------------------------------------------------------------------------*/ - -unsigned long acpuclk_power_collapse(void) { - int ret = acpuclk_get_rate(); - ret *= 1000; - if (ret > drv_state.power_collapse_khz) - acpuclk_set_rate(drv_state.power_collapse_khz, 1); - return ret; -} - -unsigned long acpuclk_get_wfi_rate(void) -{ - return drv_state.wait_for_irq_khz; -} - -unsigned long acpuclk_wait_for_irq(void) { - int ret = acpuclk_get_rate(); - ret *= 1000; - if (ret > drv_state.wait_for_irq_khz) - acpuclk_set_rate(drv_state.wait_for_irq_khz, 1); - return ret; -} - -static int acpuclk_set_vdd_level(int vdd) -{ - uint32_t current_vdd; - - current_vdd = readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x07; - -#if PERF_SWITCH_DEBUG - printk(KERN_DEBUG "acpuclock: Switching VDD from %u -> %d\n", - current_vdd, vdd); -#endif - writel((1 << 7) | (vdd << 3), A11S_VDD_SVS_PLEVEL_ADDR); - udelay(drv_state.vdd_switch_time_us); - if ((readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x7) != vdd) { -#if PERF_SWITCH_DEBUG - printk(KERN_ERR "acpuclock: VDD set failed\n"); -#endif - return -EIO; - } - -#if PERF_SWITCH_DEBUG - printk(KERN_DEBUG "acpuclock: VDD switched\n"); -#endif - return 0; -} - -/* Set proper dividers for the given clock speed. */ -static void acpuclk_set_div(const struct clkctl_acpu_speed *hunt_s) { - uint32_t reg_clkctl, reg_clksel, clk_div; - - /* AHB_CLK_DIV */ - clk_div = (readl(A11S_CLK_SEL_ADDR) >> 1) & 0x03; - /* - * If the new clock divider is higher than the previous, then - * program the divider before switching the clock - */ - if (hunt_s->ahbclk_div > clk_div) { - reg_clksel = readl(A11S_CLK_SEL_ADDR); - reg_clksel &= ~(0x3 << 1); - reg_clksel |= (hunt_s->ahbclk_div << 1); - writel(reg_clksel, A11S_CLK_SEL_ADDR); - } - if ((readl(A11S_CLK_SEL_ADDR) & 0x01) == 0) { - /* SRC0 */ - - /* Program clock source */ - reg_clkctl = readl(A11S_CLK_CNTL_ADDR); - reg_clkctl &= ~(0x07 << 4); - reg_clkctl |= (hunt_s->a11clk_src_sel << 4); - writel(reg_clkctl, A11S_CLK_CNTL_ADDR); - - /* Program clock divider */ - reg_clkctl = readl(A11S_CLK_CNTL_ADDR); - reg_clkctl &= ~0xf; - reg_clkctl |= hunt_s->a11clk_src_div; - writel(reg_clkctl, A11S_CLK_CNTL_ADDR); - - /* Program clock source selection */ - reg_clksel = readl(A11S_CLK_SEL_ADDR); - reg_clksel |= 1; /* CLK_SEL_SRC1NO == SRC1 */ - writel(reg_clksel, A11S_CLK_SEL_ADDR); - } else { - /* SRC1 */ - - /* Program clock source */ - reg_clkctl = readl(A11S_CLK_CNTL_ADDR); - reg_clkctl &= ~(0x07 << 12); - reg_clkctl |= (hunt_s->a11clk_src_sel << 12); - writel(reg_clkctl, A11S_CLK_CNTL_ADDR); - - /* Program clock divider */ - reg_clkctl = readl(A11S_CLK_CNTL_ADDR); - reg_clkctl &= ~(0xf << 8); - reg_clkctl |= (hunt_s->a11clk_src_div << 8); - writel(reg_clkctl, A11S_CLK_CNTL_ADDR); - - /* Program clock source selection */ - reg_clksel = readl(A11S_CLK_SEL_ADDR); - reg_clksel &= ~1; /* CLK_SEL_SRC1NO == SRC0 */ - writel(reg_clksel, A11S_CLK_SEL_ADDR); - } - - /* - * If the new clock divider is lower than the previous, then - * program the divider after switching the clock - */ - if (hunt_s->ahbclk_div < clk_div) { - reg_clksel = readl(A11S_CLK_SEL_ADDR); - reg_clksel &= ~(0x3 << 1); - reg_clksel |= (hunt_s->ahbclk_div << 1); - writel(reg_clksel, A11S_CLK_SEL_ADDR); - } -} - -int acpuclk_set_rate(unsigned long rate, int for_power_collapse) -{ - uint32_t reg_clkctl; - struct clkctl_acpu_speed *cur_s, *tgt_s, *strt_s; - int rc = 0; - unsigned int plls_enabled = 0, pll; - - strt_s = cur_s = drv_state.current_speed; - - WARN_ONCE(cur_s == NULL, "acpuclk_set_rate: not initialized\n"); - if (cur_s == NULL) - return -ENOENT; - - if (rate == (cur_s->a11clk_khz * 1000)) - return 0; - - for (tgt_s = acpu_freq_tbl; tgt_s->a11clk_khz != 0; tgt_s++) { - if (tgt_s->a11clk_khz == (rate / 1000)) - break; - } - - if (tgt_s->a11clk_khz == 0) - return -EINVAL; - - /* Choose the highest speed speed at or below 'rate' with same PLL. */ - if (for_power_collapse && tgt_s->a11clk_khz < cur_s->a11clk_khz) { - while (tgt_s->pll != ACPU_PLL_TCXO && tgt_s->pll != cur_s->pll) - tgt_s--; - } - - if (strt_s->pll != ACPU_PLL_TCXO) - plls_enabled |= 1 << strt_s->pll; - - if (!for_power_collapse) { - mutex_lock(&drv_state.lock); - if (strt_s->pll != tgt_s->pll && tgt_s->pll != ACPU_PLL_TCXO) { - rc = pc_pll_request(tgt_s->pll, 1); - if (rc < 0) { - pr_err("PLL%d enable failed (%d)\n", - tgt_s->pll, rc); - goto out; - } - plls_enabled |= 1 << tgt_s->pll; - } - /* Increase VDD if needed. */ - if (tgt_s->vdd > cur_s->vdd) { - if ((rc = acpuclk_set_vdd_level(tgt_s->vdd)) < 0) { - printk(KERN_ERR "Unable to switch ACPU vdd\n"); - goto out; - } - } - } - - /* Set wait states for CPU between frequency changes */ - reg_clkctl = readl(A11S_CLK_CNTL_ADDR); - reg_clkctl |= (100 << 16); /* set WT_ST_CNT */ - writel(reg_clkctl, A11S_CLK_CNTL_ADDR); - -#if PERF_SWITCH_DEBUG - printk(KERN_INFO "acpuclock: Switching from ACPU rate %u -> %u\n", - strt_s->a11clk_khz * 1000, tgt_s->a11clk_khz * 1000); -#endif - - while (cur_s != tgt_s) { - /* - * Always jump to target freq if within 256mhz, regulardless of - * PLL. If differnece is greater, use the predefinied - * steppings in the table. - */ - int d = abs((int)(cur_s->a11clk_khz - tgt_s->a11clk_khz)); - if (d > drv_state.max_speed_delta_khz) { - /* Step up or down depending on target vs current. */ - int clk_index = tgt_s->a11clk_khz > cur_s->a11clk_khz ? - cur_s->up : cur_s->down; - if (clk_index < 0) { /* This should not happen. */ - printk(KERN_ERR "cur:%u target: %u\n", - cur_s->a11clk_khz, tgt_s->a11clk_khz); - rc = -EINVAL; - goto out; - } - cur_s = &acpu_freq_tbl[clk_index]; - } else { - cur_s = tgt_s; - } -#if PERF_SWITCH_STEP_DEBUG - printk(KERN_DEBUG "%s: STEP khz = %u, pll = %d\n", - __FUNCTION__, cur_s->a11clk_khz, cur_s->pll); -#endif - if (!for_power_collapse&& cur_s->pll != ACPU_PLL_TCXO - && !(plls_enabled & (1 << cur_s->pll))) { - rc = pc_pll_request(cur_s->pll, 1); - if (rc < 0) { - pr_err("PLL%d enable failed (%d)\n", - cur_s->pll, rc); - goto out; - } - plls_enabled |= 1 << cur_s->pll; - } - - acpuclk_set_div(cur_s); - drv_state.current_speed = cur_s; - /* Re-adjust lpj for the new clock speed. */ - loops_per_jiffy = cur_s->lpj; - udelay(drv_state.acpu_switch_time_us); - } - - /* Nothing else to do for power collapse. */ - if (for_power_collapse) - return 0; - - /* Disable PLLs we are not using anymore. */ - plls_enabled &= ~(1 << tgt_s->pll); - for (pll = ACPU_PLL_0; pll <= ACPU_PLL_2; pll++) - if (plls_enabled & (1 << pll)) { - rc = pc_pll_request(pll, 0); - if (rc < 0) { - pr_err("PLL%d disable failed (%d)\n", pll, rc); - goto out; - } - } - - /* Change the AXI bus frequency if we can. */ - if (strt_s->axiclk_khz != tgt_s->axiclk_khz) { - rc = clk_set_rate(ebi1_clk, tgt_s->axiclk_khz * 1000); - if (rc < 0) - pr_err("Setting AXI min rate failed!\n"); - } - - /* Drop VDD level if we can. */ - if (tgt_s->vdd < strt_s->vdd) { - if (acpuclk_set_vdd_level(tgt_s->vdd) < 0) - printk(KERN_ERR "acpuclock: Unable to drop ACPU vdd\n"); - } - -#if PERF_SWITCH_DEBUG - printk(KERN_DEBUG "%s: ACPU speed change complete\n", __FUNCTION__); -#endif -out: - if (!for_power_collapse) - mutex_unlock(&drv_state.lock); - return rc; -} - -static void __init acpuclk_init(void) -{ - struct clkctl_acpu_speed *speed; - uint32_t div, sel; - int rc; - - /* - * Determine the rate of ACPU clock - */ - - if (!(readl(A11S_CLK_SEL_ADDR) & 0x01)) { /* CLK_SEL_SRC1N0 */ - /* CLK_SRC0_SEL */ - sel = (readl(A11S_CLK_CNTL_ADDR) >> 12) & 0x7; - /* CLK_SRC0_DIV */ - div = (readl(A11S_CLK_CNTL_ADDR) >> 8) & 0x0f; - } else { - /* CLK_SRC1_SEL */ - sel = (readl(A11S_CLK_CNTL_ADDR) >> 4) & 0x07; - /* CLK_SRC1_DIV */ - div = readl(A11S_CLK_CNTL_ADDR) & 0x0f; - } - - for (speed = acpu_freq_tbl; speed->a11clk_khz != 0; speed++) { - if (speed->a11clk_src_sel == sel - && (speed->a11clk_src_div == div)) - break; - } - if (speed->a11clk_khz == 0) { - printk(KERN_WARNING "Warning - ACPU clock reports invalid speed\n"); - return; - } - - drv_state.current_speed = speed; - - rc = clk_set_rate(ebi1_clk, speed->axiclk_khz * 1000); - if (rc < 0) - pr_err("Setting AXI min rate failed!\n"); - - printk(KERN_INFO "ACPU running at %d KHz\n", speed->a11clk_khz); -} - -unsigned long acpuclk_get_rate(void) -{ - WARN_ONCE(drv_state.current_speed == NULL, - "acpuclk_get_rate: not initialized\n"); - if (drv_state.current_speed) - return drv_state.current_speed->a11clk_khz; - else - return 0; -} - -uint32_t acpuclk_get_switch_time(void) -{ - return drv_state.acpu_switch_time_us; -} - -/*---------------------------------------------------------------------------- - * Clock driver initialization - *---------------------------------------------------------------------------*/ - -/* Initialize the lpj field in the acpu_freq_tbl. */ -static void __init lpj_init(void) -{ - int i; - const struct clkctl_acpu_speed *base_clk = drv_state.current_speed; - for (i = 0; acpu_freq_tbl[i].a11clk_khz; i++) { - acpu_freq_tbl[i].lpj = cpufreq_scale(loops_per_jiffy, - base_clk->a11clk_khz, - acpu_freq_tbl[i].a11clk_khz); - } -} - -void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *clkdata) -{ - pr_info("acpu_clock_init()\n"); - - ebi1_clk = clk_get(NULL, "ebi1_clk"); - - mutex_init(&drv_state.lock); - drv_state.acpu_switch_time_us = clkdata->acpu_switch_time_us; - drv_state.max_speed_delta_khz = clkdata->max_speed_delta_khz; - drv_state.vdd_switch_time_us = clkdata->vdd_switch_time_us; - drv_state.power_collapse_khz = clkdata->power_collapse_khz; - drv_state.wait_for_irq_khz = clkdata->wait_for_irq_khz; - acpuclk_init(); - lpj_init(); -#ifdef CONFIG_CPU_FREQ_TABLE - cpufreq_frequency_table_get_attr(freq_table, smp_processor_id()); -#endif -} diff --git a/arch/arm/mach-msm/acpuclock.h b/arch/arm/mach-msm/acpuclock.h deleted file mode 100644 index 415de2eb9a5..00000000000 --- a/arch/arm/mach-msm/acpuclock.h +++ /dev/null @@ -1,32 +0,0 @@ -/* arch/arm/mach-msm/acpuclock.h - * - * MSM architecture clock driver header - * - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2007 QUALCOMM Incorporated - * Author: San Mehat <san@android.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ARCH_ARM_MACH_MSM_ACPUCLOCK_H -#define __ARCH_ARM_MACH_MSM_ACPUCLOCK_H - -int acpuclk_set_rate(unsigned long rate, int for_power_collapse); -unsigned long acpuclk_get_rate(void); -uint32_t acpuclk_get_switch_time(void); -unsigned long acpuclk_wait_for_irq(void); -unsigned long acpuclk_power_collapse(void); -unsigned long acpuclk_get_wfi_rate(void); - - -#endif - diff --git a/arch/arm/mach-msm/board-dt-8660.c b/arch/arm/mach-msm/board-dt-8660.c new file mode 100644 index 00000000000..b5b4de2cdf9 --- /dev/null +++ b/arch/arm/mach-msm/board-dt-8660.c @@ -0,0 +1,64 @@ +/* Copyright (c) 2010-2012, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/init.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> + +#include <asm/mach/arch.h> +#include <asm/hardware/gic.h> + +#include <mach/board.h> +#include "common.h" + +static const struct of_device_id msm_dt_gic_match[] __initconst = { + { .compatible = "qcom,msm-8660-qgic", .data = gic_of_init }, + {} +}; + +static void __init msm8x60_init_irq(void) +{ + of_irq_init(msm_dt_gic_match); +} + +static void __init msm8x60_init_late(void) +{ + smd_debugfs_init(); +} + +static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = { + {} +}; + +static void __init msm8x60_dt_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + msm_auxdata_lookup, NULL); +} + +static const char *msm8x60_fluid_match[] __initdata = { + "qcom,msm8660-fluid", + "qcom,msm8660-surf", + NULL +}; + +DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)") + .smp = smp_ops(msm_smp_ops), + .map_io = msm_map_msm8x60_io, + .init_irq = msm8x60_init_irq, + .handle_irq = gic_handle_irq, + .init_machine = msm8x60_dt_init, + .init_late = msm8x60_init_late, + .timer = &msm_dt_timer, + .dt_compat = msm8x60_fluid_match, +MACHINE_END diff --git a/arch/arm/mach-msm/board-dt-8960.c b/arch/arm/mach-msm/board-dt-8960.c new file mode 100644 index 00000000000..4490edb71c1 --- /dev/null +++ b/arch/arm/mach-msm/board-dt-8960.c @@ -0,0 +1,50 @@ +/* Copyright (c) 2012, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/init.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> + +#include <asm/hardware/gic.h> +#include <asm/mach/arch.h> + +#include "common.h" + +static const struct of_device_id msm_dt_gic_match[] __initconst = { + { .compatible = "qcom,msm-qgic2", .data = gic_of_init }, + { } +}; + +static void __init msm_dt_init_irq(void) +{ + of_irq_init(msm_dt_gic_match); +} + +static void __init msm_dt_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char * const msm8960_dt_match[] __initconst = { + "qcom,msm8960-cdp", + NULL +}; + +DT_MACHINE_START(MSM8960_DT, "Qualcomm MSM (Flattened Device Tree)") + .smp = smp_ops(msm_smp_ops), + .map_io = msm_map_msm8960_io, + .init_irq = msm_dt_init_irq, + .timer = &msm_dt_timer, + .init_machine = msm_dt_init, + .dt_compat = msm8960_dt_match, + .handle_irq = gic_handle_irq, +MACHINE_END diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index 4fa3e99d9a6..6ce542e2e21 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -36,6 +36,7 @@ #include <linux/mtd/partitions.h> #include "devices.h" +#include "common.h" static struct resource smc91x_resources[] = { [0] = { @@ -66,8 +67,6 @@ static struct platform_device *devices[] __initdata = { &smc91x_device, }; -extern struct sys_timer msm_timer; - static void __init halibut_init_early(void) { arch_ioremap_caller = __msm_ioremap_caller; @@ -107,5 +106,5 @@ MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)") .init_irq = halibut_init_irq, .init_machine = halibut_init, .init_late = halibut_init_late, - .timer = &msm_timer, + .timer = &msm7x01_timer, MACHINE_END diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c index cf1f89a5dc6..df00bc03ce7 100644 --- a/arch/arm/mach-msm/board-mahimahi.c +++ b/arch/arm/mach-msm/board-mahimahi.c @@ -30,7 +30,6 @@ #include <mach/board.h> #include <mach/hardware.h> -#include <mach/system.h> #include "board-mahimahi.h" #include "devices.h" diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c deleted file mode 100644 index 451ab1d43c9..00000000000 --- a/arch/arm/mach-msm/board-msm7x27.c +++ /dev/null @@ -1,170 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/io.h> -#include <linux/delay.h> -#include <linux/power_supply.h> - -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> -#include <asm/setup.h> -#ifdef CONFIG_CACHE_L2X0 -#include <asm/hardware/cache-l2x0.h> -#endif - -#include <mach/vreg.h> -#include <mach/mpp.h> -#include <mach/board.h> -#include <mach/msm_iomap.h> - -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> - -#include "devices.h" -#include "socinfo.h" -#include "clock.h" - -static struct resource smc91x_resources[] = { - [0] = { - .start = 0x9C004300, - .end = 0x9C0043ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = MSM_GPIO_TO_INT(132), - .end = MSM_GPIO_TO_INT(132), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static struct platform_device *devices[] __initdata = { - &msm_device_uart3, - &msm_device_smd, - &msm_device_dmov, - &msm_device_nand, - &smc91x_device, -}; - -extern struct sys_timer msm_timer; - -static void __init msm7x2x_init_irq(void) -{ - msm_init_irq(); -} - -static void __init msm7x2x_init(void) -{ - if (socinfo_init() < 0) - BUG(); - - if (machine_is_msm7x25_ffa() || machine_is_msm7x27_ffa()) { - smc91x_resources[0].start = 0x98000300; - smc91x_resources[0].end = 0x980003ff; - smc91x_resources[1].start = MSM_GPIO_TO_INT(85); - smc91x_resources[1].end = MSM_GPIO_TO_INT(85); - if (gpio_tlmm_config(GPIO_CFG(85, 0, - GPIO_INPUT, - GPIO_PULL_DOWN, - GPIO_2MA), - GPIO_ENABLE)) { - printk(KERN_ERR - "%s: Err: Config GPIO-85 INT\n", - __func__); - } - } - - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -static void __init msm7x2x_map_io(void) -{ - msm_map_common_io(); - /* Technically dependent on the SoC but using machine_is - * macros since socinfo is not available this early and there - * are plans to restructure the code which will eliminate the - * need for socinfo. - */ - if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa()) - msm_clock_init(msm_clocks_7x27, msm_num_clocks_7x27); - - if (machine_is_msm7x25_surf() || machine_is_msm7x25_ffa()) - msm_clock_init(msm_clocks_7x25, msm_num_clocks_7x25); - -#ifdef CONFIG_CACHE_L2X0 - if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa()) { - /* 7x27 has 256KB L2 cache: - 64Kb/Way and 4-Way Associativity; - R/W latency: 3 cycles; - evmon/parity/share disabled. */ - l2x0_init(MSM_L2CC_BASE, 0x00068012, 0xfe000000); - } -#endif -} - -static void __init msm7x2x_init_late(void) -{ - smd_debugfs_init(); -} - -MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF") - .atag_offset = 0x100, - .map_io = msm7x2x_map_io, - .init_irq = msm7x2x_init_irq, - .init_machine = msm7x2x_init, - .init_late = msm7x2x_init_late, - .timer = &msm_timer, -MACHINE_END - -MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA") - .atag_offset = 0x100, - .map_io = msm7x2x_map_io, - .init_irq = msm7x2x_init_irq, - .init_machine = msm7x2x_init, - .init_late = msm7x2x_init_late, - .timer = &msm_timer, -MACHINE_END - -MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF") - .atag_offset = 0x100, - .map_io = msm7x2x_map_io, - .init_irq = msm7x2x_init_irq, - .init_machine = msm7x2x_init, - .init_late = msm7x2x_init_late, - .timer = &msm_timer, -MACHINE_END - -MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA") - .atag_offset = 0x100, - .map_io = msm7x2x_map_io, - .init_irq = msm7x2x_init_irq, - .init_machine = msm7x2x_init, - .init_late = msm7x2x_init_late, - .timer = &msm_timer, -MACHINE_END diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index a5001378135..effa6f4336c 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -38,8 +38,7 @@ #include "devices.h" #include "gpiomux.h" #include "proc_comm.h" - -extern struct sys_timer msm_timer; +#include "common.h" static void __init msm7x30_fixup(struct tag *tag, char **cmdline, struct meminfo *mi) @@ -132,7 +131,7 @@ MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF") .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, .init_late = msm7x30_init_late, - .timer = &msm_timer, + .timer = &msm7x30_timer, MACHINE_END MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") @@ -143,7 +142,7 @@ MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, .init_late = msm7x30_init_late, - .timer = &msm_timer, + .timer = &msm7x30_timer, MACHINE_END MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID") @@ -154,5 +153,5 @@ MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID") .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, .init_late = msm7x30_init_late, - .timer = &msm_timer, + .timer = &msm7x30_timer, MACHINE_END diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c deleted file mode 100644 index 65f4a1daa2e..00000000000 --- a/arch/arm/mach-msm/board-msm8960.c +++ /dev/null @@ -1,122 +0,0 @@ -/* Copyright (c) 2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - */ -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/clkdev.h> -#include <linux/memblock.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/hardware/gic.h> -#include <asm/setup.h> - -#include <mach/board.h> -#include <mach/msm_iomap.h> - -#include "devices.h" - -static void __init msm8960_fixup(struct tag *tag, char **cmdline, - struct meminfo *mi) -{ - for (; tag->hdr.size; tag = tag_next(tag)) - if (tag->hdr.tag == ATAG_MEM && - tag->u.mem.start == 0x40200000) { - tag->u.mem.start = 0x40000000; - tag->u.mem.size += SZ_2M; - } -} - -static void __init msm8960_reserve(void) -{ - memblock_remove(0x40000000, SZ_2M); -} - -static void __init msm8960_map_io(void) -{ - msm_map_msm8960_io(); -} - -static void __init msm8960_init_irq(void) -{ - unsigned int i; - gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE, - (void *)MSM_QGIC_CPU_BASE); - - /* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */ - writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4); - - if (machine_is_msm8960_rumi3()) - writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET); - - /* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet - * as they are configured as level, which does not play nice with - * handle_percpu_irq. - */ - for (i = GIC_PPI_START; i < GIC_SPI_START; i++) { - if (i != AVS_SVICINT && i != AVS_SVICINTSWDONE) - irq_set_handler(i, handle_percpu_irq); - } -} - -static struct platform_device *sim_devices[] __initdata = { - &msm8960_device_uart_gsbi2, -}; - -static struct platform_device *rumi3_devices[] __initdata = { - &msm8960_device_uart_gsbi5, -}; - -static void __init msm8960_sim_init(void) -{ - platform_add_devices(sim_devices, ARRAY_SIZE(sim_devices)); -} - -static void __init msm8960_rumi3_init(void) -{ - platform_add_devices(rumi3_devices, ARRAY_SIZE(rumi3_devices)); -} - -static void __init msm8960_init_late(void) -{ - smd_debugfs_init(); -} - -MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR") - .fixup = msm8960_fixup, - .reserve = msm8960_reserve, - .map_io = msm8960_map_io, - .init_irq = msm8960_init_irq, - .timer = &msm_timer, - .handle_irq = gic_handle_irq, - .init_machine = msm8960_sim_init, - .init_late = msm8960_init_late, -MACHINE_END - -MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3") - .fixup = msm8960_fixup, - .reserve = msm8960_reserve, - .map_io = msm8960_map_io, - .init_irq = msm8960_init_irq, - .timer = &msm_timer, - .handle_irq = gic_handle_irq, - .init_machine = msm8960_rumi3_init, - .init_late = msm8960_init_late, -MACHINE_END - diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c deleted file mode 100644 index e37a724cd1e..00000000000 --- a/arch/arm/mach-msm/board-msm8x60.c +++ /dev/null @@ -1,166 +0,0 @@ -/* Copyright (c) 2010, 2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/irqdomain.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> -#include <linux/memblock.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/hardware/gic.h> -#include <asm/setup.h> - -#include <mach/board.h> -#include <mach/msm_iomap.h> - -static void __init msm8x60_fixup(struct tag *tag, char **cmdline, - struct meminfo *mi) -{ - for (; tag->hdr.size; tag = tag_next(tag)) - if (tag->hdr.tag == ATAG_MEM && - tag->u.mem.start == 0x40200000) { - tag->u.mem.start = 0x40000000; - tag->u.mem.size += SZ_2M; - } -} - -static void __init msm8x60_reserve(void) -{ - memblock_remove(0x40000000, SZ_2M); -} - -static void __init msm8x60_map_io(void) -{ - msm_map_msm8x60_io(); -} - -#ifdef CONFIG_OF -static struct of_device_id msm_dt_gic_match[] __initdata = { - { .compatible = "qcom,msm-8660-qgic", .data = gic_of_init }, - {} -}; -#endif - -static void __init msm8x60_init_irq(void) -{ - if (!of_have_populated_dt()) - gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE, - (void *)MSM_QGIC_CPU_BASE); -#ifdef CONFIG_OF - else - of_irq_init(msm_dt_gic_match); -#endif - - /* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */ - writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4); - - /* RUMI does not adhere to GIC spec by enabling STIs by default. - * Enable/clear is supposed to be RO for STIs, but is RW on RUMI. - */ - if (!machine_is_msm8x60_sim()) - writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET); -} - -static void __init msm8x60_init(void) -{ -} - -static void __init msm8x60_init_late(void) -{ - smd_debugfs_init(); -} - -#ifdef CONFIG_OF -static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = { - {} -}; - -static void __init msm8x60_dt_init(void) -{ - if (of_machine_is_compatible("qcom,msm8660-surf")) { - printk(KERN_INFO "Init surf UART registers\n"); - msm8x60_init_uart12dm(); - } - - of_platform_populate(NULL, of_default_bus_match_table, - msm_auxdata_lookup, NULL); -} - -static const char *msm8x60_fluid_match[] __initdata = { - "qcom,msm8660-fluid", - "qcom,msm8660-surf", - NULL -}; -#endif /* CONFIG_OF */ - -MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3") - .fixup = msm8x60_fixup, - .reserve = msm8x60_reserve, - .map_io = msm8x60_map_io, - .init_irq = msm8x60_init_irq, - .handle_irq = gic_handle_irq, - .init_machine = msm8x60_init, - .init_late = msm8x60_init_late, - .timer = &msm_timer, -MACHINE_END - -MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF") - .fixup = msm8x60_fixup, - .reserve = msm8x60_reserve, - .map_io = msm8x60_map_io, - .init_irq = msm8x60_init_irq, - .handle_irq = gic_handle_irq, - .init_machine = msm8x60_init, - .init_late = msm8x60_init_late, - .timer = &msm_timer, -MACHINE_END - -MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR") - .fixup = msm8x60_fixup, - .reserve = msm8x60_reserve, - .map_io = msm8x60_map_io, - .init_irq = msm8x60_init_irq, - .handle_irq = gic_handle_irq, - .init_machine = msm8x60_init, - .init_late = msm8x60_init_late, - .timer = &msm_timer, -MACHINE_END - -MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA") - .fixup = msm8x60_fixup, - .reserve = msm8x60_reserve, - .map_io = msm8x60_map_io, - .init_irq = msm8x60_init_irq, - .handle_irq = gic_handle_irq, - .init_machine = msm8x60_init, - .init_late = msm8x60_init_late, - .timer = &msm_timer, -MACHINE_END - -#ifdef CONFIG_OF -/* TODO: General device tree support for all MSM. */ -DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)") - .map_io = msm8x60_map_io, - .init_irq = msm8x60_init_irq, - .init_machine = msm8x60_dt_init, - .init_late = msm8x60_init_late, - .timer = &msm_timer, - .dt_compat = msm8x60_fluid_match, -MACHINE_END -#endif /* CONFIG_OF */ diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index c8fe0edb976..2448fcf09eb 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -32,14 +32,13 @@ #include <mach/irqs.h> #include <mach/sirc.h> #include <mach/vreg.h> -#include <mach/mmc.h> +#include <linux/platform_data/mmc-msm_sdcc.h> #include "devices.h" +#include "common.h" -extern struct sys_timer msm_timer; - -static const resource_size_t qsd8x50_surf_smc91x_base __initdata = 0x70000300; -static const unsigned qsd8x50_surf_smc91x_gpio __initdata = 156; +static const resource_size_t qsd8x50_surf_smc91x_base __initconst = 0x70000300; +static const unsigned qsd8x50_surf_smc91x_gpio __initconst = 156; /* Leave smc91x resources empty here, as we'll fill them in * at run-time: they vary from board to board, and the true @@ -201,7 +200,7 @@ MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF") .init_irq = qsd8x50_init_irq, .init_machine = qsd8x50_init, .init_late = qsd8x50_init_late, - .timer = &msm_timer, + .timer = &qsd8x50_timer, MACHINE_END MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5") @@ -210,5 +209,5 @@ MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5") .init_irq = qsd8x50_init_irq, .init_machine = qsd8x50_init, .init_late = qsd8x50_init_late, - .timer = &msm_timer, + .timer = &qsd8x50_timer, MACHINE_END diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c index 2e569ab10ee..b7b0fc7e327 100644 --- a/arch/arm/mach-msm/board-sapphire.c +++ b/arch/arm/mach-msm/board-sapphire.c @@ -27,7 +27,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <mach/system.h> #include <mach/vreg.h> #include <mach/board.h> diff --git a/arch/arm/mach-msm/board-trout-mmc.c b/arch/arm/mach-msm/board-trout-mmc.c index 8650342b749..3723e55819d 100644 --- a/arch/arm/mach-msm/board-trout-mmc.c +++ b/arch/arm/mach-msm/board-trout-mmc.c @@ -15,7 +15,7 @@ #include <mach/vreg.h> -#include <mach/mmc.h> +#include <linux/platform_data/mmc-msm_sdcc.h> #include "devices.h" diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c index 89bf6b42669..f9a5db6d2ce 100644 --- a/arch/arm/mach-msm/board-trout-panel.c +++ b/arch/arm/mach-msm/board-trout-panel.c @@ -14,7 +14,7 @@ #include <asm/mach-types.h> #include <asm/system_info.h> -#include <mach/msm_fb.h> +#include <linux/platform_data/video-msm_fb.h> #include <mach/vreg.h> #include "board-trout.h" diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index bbe13f12fa0..4ba0800e243 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -31,6 +31,7 @@ #include "devices.h" #include "board-trout.h" +#include "common.h" extern int trout_init_mmc(unsigned int); @@ -42,8 +43,6 @@ static struct platform_device *devices[] __initdata = { &msm_device_i2c, }; -extern struct sys_timer msm_timer; - static void __init trout_init_early(void) { arch_ioremap_caller = __msm_ioremap_caller; @@ -111,5 +110,5 @@ MACHINE_START(TROUT, "HTC Dream") .init_irq = trout_init_irq, .init_machine = trout_init, .init_late = trout_init_late, - .timer = &msm_timer, + .timer = &msm7x01_timer, MACHINE_END diff --git a/arch/arm/mach-msm/clock-pcom.c b/arch/arm/mach-msm/clock-pcom.c index 63b71131108..a52c970df15 100644 --- a/arch/arm/mach-msm/clock-pcom.c +++ b/arch/arm/mach-msm/clock-pcom.c @@ -25,7 +25,7 @@ /* * glue for the proc_comm interface */ -int pc_clk_enable(unsigned id) +static int pc_clk_enable(unsigned id) { int rc = msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, NULL); if (rc < 0) @@ -34,7 +34,7 @@ int pc_clk_enable(unsigned id) return (int)id < 0 ? -EINVAL : 0; } -void pc_clk_disable(unsigned id) +static void pc_clk_disable(unsigned id) { msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, NULL); } @@ -54,7 +54,7 @@ int pc_clk_reset(unsigned id, enum clk_reset_action action) return (int)id < 0 ? -EINVAL : 0; } -int pc_clk_set_rate(unsigned id, unsigned rate) +static int pc_clk_set_rate(unsigned id, unsigned rate) { /* The rate _might_ be rounded off to the nearest KHz value by the * remote function. So a return value of 0 doesn't necessarily mean @@ -67,7 +67,7 @@ int pc_clk_set_rate(unsigned id, unsigned rate) return (int)id < 0 ? -EINVAL : 0; } -int pc_clk_set_min_rate(unsigned id, unsigned rate) +static int pc_clk_set_min_rate(unsigned id, unsigned rate) { int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate); if (rc < 0) @@ -76,7 +76,7 @@ int pc_clk_set_min_rate(unsigned id, unsigned rate) return (int)id < 0 ? -EINVAL : 0; } -int pc_clk_set_max_rate(unsigned id, unsigned rate) +static int pc_clk_set_max_rate(unsigned id, unsigned rate) { int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MAX_RATE, &id, &rate); if (rc < 0) @@ -85,7 +85,7 @@ int pc_clk_set_max_rate(unsigned id, unsigned rate) return (int)id < 0 ? -EINVAL : 0; } -int pc_clk_set_flags(unsigned id, unsigned flags) +static int pc_clk_set_flags(unsigned id, unsigned flags) { int rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_FLAGS, &id, &flags); if (rc < 0) @@ -94,7 +94,7 @@ int pc_clk_set_flags(unsigned id, unsigned flags) return (int)id < 0 ? -EINVAL : 0; } -unsigned pc_clk_get_rate(unsigned id) +static unsigned pc_clk_get_rate(unsigned id) { if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, NULL)) return 0; @@ -102,7 +102,7 @@ unsigned pc_clk_get_rate(unsigned id) return id; } -unsigned pc_clk_is_enabled(unsigned id) +static unsigned pc_clk_is_enabled(unsigned id) { if (msm_proc_comm(PCOM_CLKCTL_RPC_ENABLED, &id, NULL)) return 0; @@ -110,7 +110,7 @@ unsigned pc_clk_is_enabled(unsigned id) return id; } -long pc_clk_round_rate(unsigned id, unsigned rate) +static long pc_clk_round_rate(unsigned id, unsigned rate) { /* Not really supported; pc_clk_set_rate() does rounding on it's own. */ diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h new file mode 100644 index 00000000000..633a7159d5f --- /dev/null +++ b/arch/arm/mach-msm/common.h @@ -0,0 +1,32 @@ +/* Copyright (c) 2012, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __MACH_COMMON_H +#define __MACH_COMMON_H + +extern struct sys_timer msm7x01_timer; +extern struct sys_timer msm7x30_timer; +extern struct sys_timer msm_dt_timer; +extern struct sys_timer qsd8x50_timer; + +extern void msm_map_common_io(void); +extern void msm_map_msm7x30_io(void); +extern void msm_map_msm8x60_io(void); +extern void msm_map_msm8960_io(void); +extern void msm_map_qsd8x50_io(void); + +extern void __iomem *__msm_ioremap_caller(unsigned long phys_addr, size_t size, + unsigned int mtype, void *caller); + +extern struct smp_operations msm_smp_ops; +extern void msm_cpu_die(unsigned int cpu); + +#endif diff --git a/arch/arm/mach-msm/core.h b/arch/arm/mach-msm/core.h new file mode 100644 index 00000000000..a9bab53dddf --- /dev/null +++ b/arch/arm/mach-msm/core.h @@ -0,0 +1,2 @@ +extern struct smp_operations msm_smp_ops; +extern void msm_cpu_die(unsigned int cpu); diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c index 993780f490a..f66ee6ea872 100644 --- a/arch/arm/mach-msm/devices-msm7x00.c +++ b/arch/arm/mach-msm/devices-msm7x00.c @@ -27,7 +27,7 @@ #include "clock.h" #include "clock-pcom.h" -#include <mach/mmc.h> +#include <linux/platform_data/mmc-msm_sdcc.h> static struct resource resources_uart1[] = { { diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c index 09b4f140382..e90ab5938c5 100644 --- a/arch/arm/mach-msm/devices-msm7x30.c +++ b/arch/arm/mach-msm/devices-msm7x30.c @@ -31,7 +31,7 @@ #include "clock-pcom.h" #include "clock-7x30.h" -#include <mach/mmc.h> +#include <linux/platform_data/mmc-msm_sdcc.h> static struct resource resources_uart2[] = { { diff --git a/arch/arm/mach-msm/devices-msm8960.c b/arch/arm/mach-msm/devices-msm8960.c deleted file mode 100644 index d9e1f26475d..00000000000 --- a/arch/arm/mach-msm/devices-msm8960.c +++ /dev/null @@ -1,85 +0,0 @@ -/* Copyright (c) 2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> - -#include <linux/dma-mapping.h> -#include <mach/irqs-8960.h> -#include <mach/board.h> - -#include "devices.h" - -#define MSM_GSBI2_PHYS 0x16100000 -#define MSM_UART2DM_PHYS (MSM_GSBI2_PHYS + 0x40000) - -#define MSM_GSBI5_PHYS 0x16400000 -#define MSM_UART5DM_PHYS (MSM_GSBI5_PHYS + 0x40000) - -static struct resource resources_uart_gsbi2[] = { - { - .start = GSBI2_UARTDM_IRQ, - .end = GSBI2_UARTDM_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .start = MSM_UART2DM_PHYS, - .end = MSM_UART2DM_PHYS + PAGE_SIZE - 1, - .name = "uart_resource", - .flags = IORESOURCE_MEM, - }, - { - .start = MSM_GSBI2_PHYS, - .end = MSM_GSBI2_PHYS + PAGE_SIZE - 1, - .name = "gsbi_resource", - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device msm8960_device_uart_gsbi2 = { - .name = "msm_serial", - .id = 0, - .num_resources = ARRAY_SIZE(resources_uart_gsbi2), - .resource = resources_uart_gsbi2, -}; - -static struct resource resources_uart_gsbi5[] = { - { - .start = GSBI5_UARTDM_IRQ, - .end = GSBI5_UARTDM_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .start = MSM_UART5DM_PHYS, - .end = MSM_UART5DM_PHYS + PAGE_SIZE - 1, - .name = "uart_resource", - .flags = IORESOURCE_MEM, - }, - { - .start = MSM_GSBI5_PHYS, - .end = MSM_GSBI5_PHYS + PAGE_SIZE - 1, - .name = "gsbi_resource", - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device msm8960_device_uart_gsbi5 = { - .name = "msm_serial", - .id = 0, - .num_resources = ARRAY_SIZE(resources_uart_gsbi5), - .resource = resources_uart_gsbi5, -}; diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c index 131633b12a3..4db61d5fe31 100644 --- a/arch/arm/mach-msm/devices-qsd8x50.c +++ b/arch/arm/mach-msm/devices-qsd8x50.c @@ -27,7 +27,7 @@ #include <asm/mach/flash.h> -#include <mach/mmc.h> +#include <linux/platform_data/mmc-msm_sdcc.h> #include "clock-pcom.h" static struct resource resources_uart3[] = { diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c index 02cae5e2951..354b91d4c3a 100644 --- a/arch/arm/mach-msm/dma.c +++ b/arch/arm/mach-msm/dma.c @@ -223,8 +223,7 @@ static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id) PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); if ((ch_status & DMOV_STATUS_CMD_PTR_RDY) && !list_empty(&ready_commands[id])) { cmd = list_entry(ready_commands[id].next, typeof(*cmd), list); - list_del(&cmd->list); - list_add_tail(&cmd->list, &active_commands[id]); + list_move_tail(&cmd->list, &active_commands[id]); if (cmd->execute_func) cmd->execute_func(cmd); PRINT_FLOW("msm_datamover_irq_handler id %d, start command\n", id); diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c index a446fc14221..750446feb44 100644 --- a/arch/arm/mach-msm/hotplug.c +++ b/arch/arm/mach-msm/hotplug.c @@ -13,7 +13,7 @@ #include <asm/cacheflush.h> #include <asm/smp_plat.h> -extern volatile int pen_release; +#include "common.h" static inline void cpu_enter_lowpower(void) { @@ -57,17 +57,12 @@ static inline void platform_do_lowpower(unsigned int cpu) } } -int platform_cpu_kill(unsigned int cpu) -{ - return 1; -} - /* * platform-specific code to shutdown a CPU * * Called with IRQs disabled */ -void platform_cpu_die(unsigned int cpu) +void __ref msm_cpu_die(unsigned int cpu) { /* * we're ready for shutdown now, so do it @@ -81,12 +76,3 @@ void platform_cpu_die(unsigned int cpu) */ cpu_leave_lowpower(); } - -int platform_cpu_disable(unsigned int cpu) -{ - /* - * we don't allow CPU 0 to be shutdown (it is still too special - * e.g. clock tick interrupts) - */ - return cpu == 0 ? -EPERM : 0; -} diff --git a/arch/arm/mach-msm/idle.c b/arch/arm/mach-msm/idle.c deleted file mode 100644 index 0c9e13c6574..00000000000 --- a/arch/arm/mach-msm/idle.c +++ /dev/null @@ -1,49 +0,0 @@ -/* arch/arm/mach-msm/idle.c - * - * Idle processing for MSM7K - work around bugs with SWFI. - * - * Copyright (c) 2007 QUALCOMM Incorporated. - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/init.h> -#include <asm/system.h> - -static void msm_idle(void) -{ -#ifdef CONFIG_MSM7X00A_IDLE - asm volatile ( - - "mrc p15, 0, r1, c1, c0, 0 /* read current CR */ \n\t" - "bic r0, r1, #(1 << 2) /* clear dcache bit */ \n\t" - "bic r0, r0, #(1 << 12) /* clear icache bit */ \n\t" - "mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */ \n\t" - - "mov r0, #0 /* prepare wfi value */ \n\t" - "mcr p15, 0, r0, c7, c10, 0 /* flush the cache */ \n\t" - "mcr p15, 0, r0, c7, c10, 4 /* memory barrier */ \n\t" - "mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */ \n\t" - - "mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */ \n\t" - - : : : "r0","r1" ); -#endif -} - -static int __init msm_idle_init(void) -{ - arm_pm_idle = msm_idle; - return 0; -} - -arch_initcall(msm_idle_init); diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h index 435f8edfafd..8cebedb1123 100644 --- a/arch/arm/mach-msm/include/mach/board.h +++ b/arch/arm/mach-msm/include/mach/board.h @@ -18,31 +18,18 @@ #define __ASM_ARCH_MSM_BOARD_H #include <linux/types.h> -#include <mach/mmc.h> +#include <linux/platform_data/mmc-msm_sdcc.h> /* platform device data structures */ -struct msm_acpu_clock_platform_data -{ - uint32_t acpu_switch_time_us; - uint32_t max_speed_delta_khz; - uint32_t vdd_switch_time_us; - unsigned long power_collapse_khz; - unsigned long wait_for_irq_khz; -}; - struct clk_lookup; -extern struct sys_timer msm_timer; - /* common init routines for use by arch/arm/mach-msm/board-*.c */ void __init msm_add_devices(void); -void __init msm_map_common_io(void); void __init msm_init_irq(void); void __init msm_init_gpio(void); void __init msm_clock_init(struct clk_lookup *clock_tbl, unsigned num_clocks); -void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *); int __init msm_add_sdcc(unsigned int controller, struct msm_mmc_platform_data *plat, unsigned int stat_irq, unsigned long stat_irq_flags); diff --git a/arch/arm/mach-msm/include/mach/gpio.h b/arch/arm/mach-msm/include/mach/gpio.h deleted file mode 100644 index 40a8c178f10..00000000000 --- a/arch/arm/mach-msm/include/mach/gpio.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/arch/arm/mach-msm/include/mach/mmc.h b/arch/arm/mach-msm/include/mach/mmc.h deleted file mode 100644 index ffcd9e3a6a7..00000000000 --- a/arch/arm/mach-msm/include/mach/mmc.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * arch/arm/include/asm/mach/mmc.h - */ -#ifndef ASMARM_MACH_MMC_H -#define ASMARM_MACH_MMC_H - -#include <linux/mmc/host.h> -#include <linux/mmc/card.h> -#include <linux/mmc/sdio_func.h> - -struct msm_mmc_gpio { - unsigned no; - const char *name; -}; - -struct msm_mmc_gpio_data { - struct msm_mmc_gpio *gpio; - u8 size; -}; - -struct msm_mmc_platform_data { - unsigned int ocr_mask; /* available voltages */ - u32 (*translate_vdd)(struct device *, unsigned int); - unsigned int (*status)(struct device *); - int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id); - struct msm_mmc_gpio_data *gpio_data; - void (*init_card)(struct mmc_card *card); -}; - -#endif diff --git a/arch/arm/mach-msm/include/mach/msm_fb.h b/arch/arm/mach-msm/include/mach/msm_fb.h deleted file mode 100644 index 1f4fc81b3d8..00000000000 --- a/arch/arm/mach-msm/include/mach/msm_fb.h +++ /dev/null @@ -1,147 +0,0 @@ -/* arch/arm/mach-msm/include/mach/msm_fb.h - * - * Internal shared definitions for various MSM framebuffer parts. - * - * Copyright (C) 2007 Google Incorporated - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _MSM_FB_H_ -#define _MSM_FB_H_ - -#include <linux/device.h> - -struct mddi_info; - -struct msm_fb_data { - int xres; /* x resolution in pixels */ - int yres; /* y resolution in pixels */ - int width; /* disply width in mm */ - int height; /* display height in mm */ - unsigned output_format; -}; - -struct msmfb_callback { - void (*func)(struct msmfb_callback *); -}; - -enum { - MSM_MDDI_PMDH_INTERFACE, - MSM_MDDI_EMDH_INTERFACE, - MSM_EBI2_INTERFACE, -}; - -#define MSMFB_CAP_PARTIAL_UPDATES (1 << 0) - -struct msm_panel_data { - /* turns off the fb memory */ - int (*suspend)(struct msm_panel_data *); - /* turns on the fb memory */ - int (*resume)(struct msm_panel_data *); - /* turns off the panel */ - int (*blank)(struct msm_panel_data *); - /* turns on the panel */ - int (*unblank)(struct msm_panel_data *); - void (*wait_vsync)(struct msm_panel_data *); - void (*request_vsync)(struct msm_panel_data *, struct msmfb_callback *); - void (*clear_vsync)(struct msm_panel_data *); - /* from the enum above */ - unsigned interface_type; - /* data to be passed to the fb driver */ - struct msm_fb_data *fb_data; - - /* capabilities supported by the panel */ - uint32_t caps; -}; - -struct msm_mddi_client_data { - void (*suspend)(struct msm_mddi_client_data *); - void (*resume)(struct msm_mddi_client_data *); - void (*activate_link)(struct msm_mddi_client_data *); - void (*remote_write)(struct msm_mddi_client_data *, uint32_t val, - uint32_t reg); - uint32_t (*remote_read)(struct msm_mddi_client_data *, uint32_t reg); - void (*auto_hibernate)(struct msm_mddi_client_data *, int); - /* custom data that needs to be passed from the board file to a - * particular client */ - void *private_client_data; - struct resource *fb_resource; - /* from the list above */ - unsigned interface_type; -}; - -struct msm_mddi_platform_data { - unsigned int clk_rate; - void (*power_client)(struct msm_mddi_client_data *, int on); - - /* fixup the mfr name, product id */ - void (*fixup)(uint16_t *mfr_name, uint16_t *product_id); - - struct resource *fb_resource; /*optional*/ - /* number of clients in the list that follows */ - int num_clients; - /* array of client information of clients */ - struct { - unsigned product_id; /* mfr id in top 16 bits, product id - * in lower 16 bits - */ - char *name; /* the device name will be the platform - * device name registered for the client, - * it should match the name of the associated - * driver - */ - unsigned id; /* id for mddi client device node, will also - * be used as device id of panel devices, if - * the client device will have multiple panels - * space must be left here for them - */ - void *client_data; /* required private client data */ - unsigned int clk_rate; /* optional: if the client requires a - * different mddi clk rate - */ - } client_platform_data[]; -}; - -struct mdp_blit_req; -struct fb_info; -struct mdp_device { - struct device dev; - void (*dma)(struct mdp_device *mpd, uint32_t addr, - uint32_t stride, uint32_t w, uint32_t h, uint32_t x, - uint32_t y, struct msmfb_callback *callback, int interface); - void (*dma_wait)(struct mdp_device *mdp); - int (*blit)(struct mdp_device *mdp, struct fb_info *fb, - struct mdp_blit_req *req); - void (*set_grp_disp)(struct mdp_device *mdp, uint32_t disp_id); -}; - -struct class_interface; -int register_mdp_client(struct class_interface *class_intf); - -/**** private client data structs go below this line ***/ - -struct msm_mddi_bridge_platform_data { - /* from board file */ - int (*init)(struct msm_mddi_bridge_platform_data *, - struct msm_mddi_client_data *); - int (*uninit)(struct msm_mddi_bridge_platform_data *, - struct msm_mddi_client_data *); - /* passed to panel for use by the fb driver */ - int (*blank)(struct msm_mddi_bridge_platform_data *, - struct msm_mddi_client_data *); - int (*unblank)(struct msm_mddi_bridge_platform_data *, - struct msm_mddi_client_data *); - struct msm_fb_data fb_data; -}; - - - -#endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h index 6c4046c2129..67dc0e98b95 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h @@ -105,11 +105,4 @@ #define MSM_AD5_PHYS 0xAC000000 #define MSM_AD5_SIZE (SZ_1M*13) -#ifndef __ASSEMBLY__ - -extern void __iomem *__msm_ioremap_caller(unsigned long phys_addr, size_t size, - unsigned int mtype, void *caller); - -#endif - #endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h index f944fe65a65..198202c267c 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h @@ -100,8 +100,4 @@ #define MSM_HSUSB_PHYS 0xA3600000 #define MSM_HSUSB_SIZE SZ_1K -#ifndef __ASSEMBLY__ -extern void msm_map_msm7x30_io(void); -#endif - #endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h index a1752c0284f..9819a556aca 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h @@ -46,12 +46,8 @@ #define MSM8960_TMR0_SIZE SZ_4K #ifdef CONFIG_DEBUG_MSM8960_UART -#define MSM_DEBUG_UART_BASE 0xE1040000 +#define MSM_DEBUG_UART_BASE 0xF0040000 #define MSM_DEBUG_UART_PHYS 0x16440000 #endif -#ifndef __ASSEMBLY__ -extern void msm_map_msm8960_io(void); -#endif - #endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h index da77cc1d545..0faa894729b 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h @@ -122,8 +122,4 @@ #define MSM_SDC4_PHYS 0xA0600000 #define MSM_SDC4_SIZE SZ_4K -#ifndef __ASSEMBLY__ -extern void msm_map_qsd8x50_io(void); -#endif - #endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h index 5aed57dc808..199372e62de 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h @@ -41,21 +41,10 @@ #define MSM8X60_QGIC_CPU_PHYS 0x02081000 #define MSM8X60_QGIC_CPU_SIZE SZ_4K -#define MSM_ACC_BASE IOMEM(0xF0002000) -#define MSM_ACC_PHYS 0x02001000 -#define MSM_ACC_SIZE SZ_4K - -#define MSM_GCC_BASE IOMEM(0xF0003000) -#define MSM_GCC_PHYS 0x02082000 -#define MSM_GCC_SIZE SZ_4K - #define MSM_TLMM_BASE IOMEM(0xF0004000) #define MSM_TLMM_PHYS 0x00800000 #define MSM_TLMM_SIZE SZ_16K -#define MSM_SHARED_RAM_BASE IOMEM(0xF0100000) -#define MSM_SHARED_RAM_SIZE SZ_1M - #define MSM8X60_TMR_PHYS 0x02000000 #define MSM8X60_TMR_SIZE SZ_4K @@ -63,12 +52,8 @@ #define MSM8X60_TMR0_SIZE SZ_4K #ifdef CONFIG_DEBUG_MSM8660_UART -#define MSM_DEBUG_UART_BASE 0xE1040000 +#define MSM_DEBUG_UART_BASE 0xF0040000 #define MSM_DEBUG_UART_PHYS 0x19C40000 #endif -#ifndef __ASSEMBLY__ -extern void msm_map_msm8x60_io(void); -#endif - #endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h index 00afdfb8c38..2ab7cf0919b 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap.h @@ -41,12 +41,11 @@ #include "msm_iomap-7x30.h" #elif defined(CONFIG_ARCH_QSD8X50) #include "msm_iomap-8x50.h" -#elif defined(CONFIG_ARCH_MSM8X60) -#include "msm_iomap-8x60.h" #else #include "msm_iomap-7x00.h" #endif +#include "msm_iomap-8x60.h" #include "msm_iomap-8960.h" #define MSM_DEBUG_UART_SIZE SZ_4K diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h deleted file mode 100644 index f5fb2ec87ff..00000000000 --- a/arch/arm/mach-msm/include/mach/system.h +++ /dev/null @@ -1,19 +0,0 @@ -/* arch/arm/mach-msm/include/mach/system.h - * - * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -/* low level hardware reset hook -- for example, hitting the - * PSHOLD line on the PMIC to hard reset the system - */ -extern void (*msm_hw_reset_hook)(void); diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index a1e7b116885..123ef9cbce1 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -29,30 +29,32 @@ #include <mach/board.h> -#define MSM_CHIP_DEVICE(name, chip) { \ +#include "common.h" + +#define MSM_CHIP_DEVICE_TYPE(name, chip, mem_type) { \ .virtual = (unsigned long) MSM_##name##_BASE, \ .pfn = __phys_to_pfn(chip##_##name##_PHYS), \ .length = chip##_##name##_SIZE, \ - .type = MT_DEVICE_NONSHARED, \ + .type = mem_type, \ } +#define MSM_DEVICE_TYPE(name, mem_type) \ + MSM_CHIP_DEVICE_TYPE(name, MSM, mem_type) +#define MSM_CHIP_DEVICE(name, chip) \ + MSM_CHIP_DEVICE_TYPE(name, chip, MT_DEVICE) #define MSM_DEVICE(name) MSM_CHIP_DEVICE(name, MSM) -#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_MSM7X27) \ - || defined(CONFIG_ARCH_MSM7X25) +#if defined(CONFIG_ARCH_MSM7X00A) static struct map_desc msm_io_desc[] __initdata = { - MSM_DEVICE(VIC), - MSM_CHIP_DEVICE(CSR, MSM7X00), - MSM_DEVICE(DMOV), - MSM_CHIP_DEVICE(GPIO1, MSM7X00), - MSM_CHIP_DEVICE(GPIO2, MSM7X00), - MSM_DEVICE(CLK_CTL), + MSM_DEVICE_TYPE(VIC, MT_DEVICE_NONSHARED), + MSM_CHIP_DEVICE_TYPE(CSR, MSM7X00, MT_DEVICE_NONSHARED), + MSM_DEVICE_TYPE(DMOV, MT_DEVICE_NONSHARED), + MSM_CHIP_DEVICE_TYPE(GPIO1, MSM7X00, MT_DEVICE_NONSHARED), + MSM_CHIP_DEVICE_TYPE(GPIO2, MSM7X00, MT_DEVICE_NONSHARED), + MSM_DEVICE_TYPE(CLK_CTL, MT_DEVICE_NONSHARED), #if defined(CONFIG_DEBUG_MSM_UART1) || defined(CONFIG_DEBUG_MSM_UART2) || \ defined(CONFIG_DEBUG_MSM_UART3) - MSM_DEVICE(DEBUG_UART), -#endif -#ifdef CONFIG_ARCH_MSM7X30 - MSM_DEVICE(GCC), + MSM_DEVICE_TYPE(DEBUG_UART, MT_DEVICE_NONSHARED), #endif { .virtual = (unsigned long) MSM_SHARED_RAM_BASE, @@ -109,8 +111,6 @@ static struct map_desc msm8x60_io_desc[] __initdata = { MSM_CHIP_DEVICE(QGIC_CPU, MSM8X60), MSM_CHIP_DEVICE(TMR, MSM8X60), MSM_CHIP_DEVICE(TMR0, MSM8X60), - MSM_DEVICE(ACC), - MSM_DEVICE(GCC), #ifdef CONFIG_DEBUG_MSM8660_UART MSM_DEVICE(DEBUG_UART), #endif diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index e012dc8391c..7ed69b69c87 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -22,23 +22,14 @@ #include <asm/mach-types.h> #include <asm/smp_plat.h> -#include <mach/msm_iomap.h> - #include "scm-boot.h" +#include "common.h" #define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0 #define SCSS_CPU1CORE_RESET 0xD80 #define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64 -/* Mask for edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */ -#define GIC_PPI_EDGE_MASK 0xFFFFD7FF - extern void msm_secondary_startup(void); -/* - * control for which core is the next to come out of the secondary - * boot "holding pen". - */ -volatile int pen_release = -1; static DEFINE_SPINLOCK(boot_lock); @@ -48,11 +39,8 @@ static inline int get_core_count(void) return ((read_cpuid_id() >> 4) & 3) + 1; } -void __cpuinit platform_secondary_init(unsigned int cpu) +static void __cpuinit msm_secondary_init(unsigned int cpu) { - /* Configure edge-triggered PPIs */ - writel(GIC_PPI_EDGE_MASK, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4); - /* * if any interrupts are already enabled for the primary * core (e.g. timer irq), then they will not have been enabled @@ -93,7 +81,7 @@ static __cpuinit void prepare_cold_cpu(unsigned int cpu) "address\n"); } -int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +static int __cpuinit msm_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; static int cold_boot_done; @@ -153,7 +141,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * does not support the ARM SCU, so just set the possible cpu mask to * NR_CPUS. */ -void __init smp_init_cpus(void) +static void __init msm_smp_init_cpus(void) { unsigned int i, ncores = get_core_count(); @@ -169,6 +157,16 @@ void __init smp_init_cpus(void) set_smp_cross_call(gic_raise_softirq); } -void __init platform_smp_prepare_cpus(unsigned int max_cpus) +static void __init msm_smp_prepare_cpus(unsigned int max_cpus) { } + +struct smp_operations msm_smp_ops __initdata = { + .smp_init_cpus = msm_smp_init_cpus, + .smp_prepare_cpus = msm_smp_prepare_cpus, + .smp_secondary_init = msm_secondary_init, + .smp_boot_secondary = msm_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = msm_cpu_die, +#endif +}; diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c index 9980dc736e7..8f1eecd8818 100644 --- a/arch/arm/mach-msm/proc_comm.c +++ b/arch/arm/mach-msm/proc_comm.c @@ -19,7 +19,6 @@ #include <linux/io.h> #include <linux/spinlock.h> #include <mach/msm_iomap.h> -#include <mach/system.h> #include "proc_comm.h" diff --git a/arch/arm/mach-msm/smd.c b/arch/arm/mach-msm/smd.c index 657be73297d..c5a2eddc6cd 100644 --- a/arch/arm/mach-msm/smd.c +++ b/arch/arm/mach-msm/smd.c @@ -30,7 +30,6 @@ #include <linux/delay.h> #include <mach/msm_smd.h> -#include <mach/system.h> #include "smd_private.h" #include "proc_comm.h" @@ -39,8 +38,6 @@ #define CONFIG_QDSP6 1 #endif -void (*msm_hw_reset_hook)(void); - #define MODULE_NAME "msm_smd" enum { @@ -52,13 +49,14 @@ static int msm_smd_debug_mask; struct shared_info { int ready; - unsigned state; + void __iomem *state; }; static unsigned dummy_state[SMSM_STATE_COUNT]; static struct shared_info smd_info = { - .state = (unsigned) &dummy_state, + /* FIXME: not a real __iomem pointer */ + .state = &dummy_state, }; module_param_named(debug_mask, msm_smd_debug_mask, @@ -101,10 +99,6 @@ static void handle_modem_crash(void) pr_err("ARM9 has CRASHED\n"); smd_diag(); - /* hard reboot if possible */ - if (msm_hw_reset_hook) - msm_hw_reset_hook(); - /* in this case the modem or watchdog should reboot us */ for (;;) ; @@ -796,22 +790,22 @@ void *smem_alloc(unsigned id, unsigned size) return smem_find(id, size); } -void *smem_item(unsigned id, unsigned *size) +void __iomem *smem_item(unsigned id, unsigned *size) { struct smem_shared *shared = (void *) MSM_SHARED_RAM_BASE; struct smem_heap_entry *toc = shared->heap_toc; if (id >= SMEM_NUM_ITEMS) - return 0; + return NULL; if (toc[id].allocated) { *size = toc[id].size; - return (void *) (MSM_SHARED_RAM_BASE + toc[id].offset); + return (MSM_SHARED_RAM_BASE + toc[id].offset); } else { *size = 0; } - return 0; + return NULL; } void *smem_find(unsigned id, unsigned size_in) @@ -857,7 +851,7 @@ static irqreturn_t smsm_irq_handler(int irq, void *data) int smsm_change_state(enum smsm_state_item item, uint32_t clear_mask, uint32_t set_mask) { - unsigned long addr = smd_info.state + item * 4; + void __iomem *addr = smd_info.state + item * 4; unsigned long flags; unsigned state; @@ -943,10 +937,10 @@ int smd_core_init(void) /* wait for essential items to be initialized */ for (;;) { unsigned size; - void *state; + void __iomem *state; state = smem_item(SMEM_SMSM_SHARED_STATE, &size); if (size == SMSM_V1_SIZE || size == SMSM_V2_SIZE) { - smd_info.state = (unsigned)state; + smd_info.state = state; break; } } diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 81280825493..476549a8a70 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -1,7 +1,7 @@ /* * * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved. * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -20,15 +20,16 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <asm/mach/time.h> #include <asm/hardware/gic.h> #include <asm/localtimer.h> #include <asm/sched_clock.h> -#include <mach/msm_iomap.h> -#include <mach/cpu.h> -#include <mach/board.h> +#include "common.h" #define TIMER_MATCH_VAL 0x0000 #define TIMER_COUNT_VAL 0x0004 @@ -36,7 +37,6 @@ #define TIMER_ENABLE_CLR_ON_MATCH_EN BIT(1) #define TIMER_ENABLE_EN BIT(0) #define TIMER_CLEAR 0x000C -#define DGT_CLK_CTL 0x0034 #define DGT_CLK_CTL_DIV_4 0x3 #define GPT_HZ 32768 @@ -101,7 +101,7 @@ static struct clock_event_device msm_clockevent = { static union { struct clock_event_device *evt; - struct clock_event_device __percpu **percpu_evt; + struct clock_event_device * __percpu *percpu_evt; } msm_evt; static void __iomem *source_base; @@ -151,7 +151,7 @@ static int __cpuinit msm_local_timer_setup(struct clock_event_device *evt) *__this_cpu_ptr(msm_evt.percpu_evt) = evt; clockevents_register_device(evt); - enable_percpu_irq(evt->irq, 0); + enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING); return 0; } @@ -172,44 +172,21 @@ static notrace u32 msm_sched_clock_read(void) return msm_clocksource.read(&msm_clocksource); } -static void __init msm_timer_init(void) +static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq, + bool percpu) { struct clock_event_device *ce = &msm_clockevent; struct clocksource *cs = &msm_clocksource; int res; - u32 dgt_hz; - - if (cpu_is_msm7x01()) { - event_base = MSM_CSR_BASE; - source_base = MSM_CSR_BASE + 0x10; - dgt_hz = 19200000 >> MSM_DGT_SHIFT; /* 600 KHz */ - cs->read = msm_read_timer_count_shift; - cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)); - } else if (cpu_is_msm7x30()) { - event_base = MSM_CSR_BASE + 0x04; - source_base = MSM_CSR_BASE + 0x24; - dgt_hz = 24576000 / 4; - } else if (cpu_is_qsd8x50()) { - event_base = MSM_CSR_BASE; - source_base = MSM_CSR_BASE + 0x10; - dgt_hz = 19200000 / 4; - } else if (cpu_is_msm8x60() || cpu_is_msm8960()) { - event_base = MSM_TMR_BASE + 0x04; - /* Use CPU0's timer as the global clock source. */ - source_base = MSM_TMR0_BASE + 0x24; - dgt_hz = 27000000 / 4; - writel_relaxed(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL); - } else - BUG(); writel_relaxed(0, event_base + TIMER_ENABLE); writel_relaxed(0, event_base + TIMER_CLEAR); writel_relaxed(~0, event_base + TIMER_MATCH_VAL); ce->cpumask = cpumask_of(0); + ce->irq = irq; - ce->irq = INT_GP_TIMER_EXP; clockevents_config_and_register(ce, GPT_HZ, 4, 0xffffffff); - if (cpu_is_msm8x60() || cpu_is_msm8960()) { + if (percpu) { msm_evt.percpu_evt = alloc_percpu(struct clock_event_device *); if (!msm_evt.percpu_evt) { pr_err("memory allocation failed for %s\n", ce->name); @@ -219,7 +196,7 @@ static void __init msm_timer_init(void) res = request_percpu_irq(ce->irq, msm_timer_interrupt, ce->name, msm_evt.percpu_evt); if (!res) { - enable_percpu_irq(ce->irq, 0); + enable_percpu_irq(ce->irq, IRQ_TYPE_EDGE_RISING); #ifdef CONFIG_LOCAL_TIMERS local_timer_register(&msm_local_timer_ops); #endif @@ -238,10 +215,143 @@ err: res = clocksource_register_hz(cs, dgt_hz); if (res) pr_err("clocksource_register failed\n"); - setup_sched_clock(msm_sched_clock_read, - cpu_is_msm7x01() ? 32 - MSM_DGT_SHIFT : 32, dgt_hz); + setup_sched_clock(msm_sched_clock_read, sched_bits, dgt_hz); } -struct sys_timer msm_timer = { - .init = msm_timer_init +#ifdef CONFIG_OF +static const struct of_device_id msm_dgt_match[] __initconst = { + { .compatible = "qcom,msm-dgt" }, + { }, +}; + +static const struct of_device_id msm_gpt_match[] __initconst = { + { .compatible = "qcom,msm-gpt" }, + { }, +}; + +static void __init msm_dt_timer_init(void) +{ + struct device_node *np; + u32 freq; + int irq; + struct resource res; + u32 percpu_offset; + void __iomem *dgt_clk_ctl; + + np = of_find_matching_node(NULL, msm_gpt_match); + if (!np) { + pr_err("Can't find GPT DT node\n"); + return; + } + + event_base = of_iomap(np, 0); + if (!event_base) { + pr_err("Failed to map event base\n"); + return; + } + + irq = irq_of_parse_and_map(np, 0); + if (irq <= 0) { + pr_err("Can't get irq\n"); + return; + } + of_node_put(np); + + np = of_find_matching_node(NULL, msm_dgt_match); + if (!np) { + pr_err("Can't find DGT DT node\n"); + return; + } + + if (of_property_read_u32(np, "cpu-offset", &percpu_offset)) + percpu_offset = 0; + + if (of_address_to_resource(np, 0, &res)) { + pr_err("Failed to parse DGT resource\n"); + return; + } + + source_base = ioremap(res.start + percpu_offset, resource_size(&res)); + if (!source_base) { + pr_err("Failed to map source base\n"); + return; + } + + if (!of_address_to_resource(np, 1, &res)) { + dgt_clk_ctl = ioremap(res.start + percpu_offset, + resource_size(&res)); + if (!dgt_clk_ctl) { + pr_err("Failed to map DGT control base\n"); + return; + } + writel_relaxed(DGT_CLK_CTL_DIV_4, dgt_clk_ctl); + iounmap(dgt_clk_ctl); + } + + if (of_property_read_u32(np, "clock-frequency", &freq)) { + pr_err("Unknown frequency\n"); + return; + } + of_node_put(np); + + msm_timer_init(freq, 32, irq, !!percpu_offset); +} + +struct sys_timer msm_dt_timer = { + .init = msm_dt_timer_init +}; +#endif + +static int __init msm_timer_map(phys_addr_t event, phys_addr_t source) +{ + event_base = ioremap(event, SZ_64); + if (!event_base) { + pr_err("Failed to map event base\n"); + return 1; + } + source_base = ioremap(source, SZ_64); + if (!source_base) { + pr_err("Failed to map source base\n"); + return 1; + } + return 0; +} + +static void __init msm7x01_timer_init(void) +{ + struct clocksource *cs = &msm_clocksource; + + if (msm_timer_map(0xc0100000, 0xc0100010)) + return; + cs->read = msm_read_timer_count_shift; + cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)); + /* 600 KHz */ + msm_timer_init(19200000 >> MSM_DGT_SHIFT, 32 - MSM_DGT_SHIFT, 7, + false); +} + +struct sys_timer msm7x01_timer = { + .init = msm7x01_timer_init +}; + +static void __init msm7x30_timer_init(void) +{ + if (msm_timer_map(0xc0100004, 0xc0100024)) + return; + msm_timer_init(24576000 / 4, 32, 1, false); +} + +struct sys_timer msm7x30_timer = { + .init = msm7x30_timer_init +}; + +static void __init qsd8x50_timer_init(void) +{ + if (msm_timer_map(0xAC100000, 0xAC100010)) + return; + msm_timer_init(19200000 / 4, 32, 7, false); +} + +struct sys_timer qsd8x50_timer = { + .init = qsd8x50_timer_init }; |