drm: merge Linux master into HEAD

Conflicts:
	drivers/gpu/drm/drm_info.c
	drivers/gpu/drm/drm_proc.c
	drivers/gpu/drm/i915/i915_gem_debugfs.c

6 files changed, 244 insertions, 36 deletions

diff --git a/arch/arm/mach-mx1/Kconfig b/arch/arm/mach-mx1/Kconfig
index 2b59fc74784..eb7660f5d4b 100644
--- a/arch/arm/mach-mx1/Kconfig
+++ b/arch/arm/mach-mx1/Kconfig
@@ -1,6 +1,6 @@
 if ARCH_MX1
 
-comment "MX1 Platforms"
+comment "MX1 platforms:"
 
 config MACH_MXLADS
 	bool
@@ -11,4 +11,9 @@ config ARCH_MX1ADS
 	help
 	  Say Y here if you are using Motorola MX1ADS/MXLADS boards
 
+config MACH_SCB9328
+	bool "Synertronixx scb9328"
+	help
+	  Say Y here if you are using a Synertronixx scb9328 board
+
 endif
diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile
index b969719011f..82f1309568e 100644
--- a/arch/arm/mach-mx1/Makefile
+++ b/arch/arm/mach-mx1/Makefile
@@ -8,3 +8,4 @@ obj-y			+= generic.o clock.o devices.o
 
 # Specific board support
 obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
+obj-$(CONFIG_MACH_SCB9328) += scb9328.o
\ No newline at end of file
diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c
index 4bcd1ece55f..0d0f306851d 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-mx1/clock.c
@@ -25,6 +25,7 @@
 
 #include <mach/clock.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
 #include "crm_regs.h"
 
 static int _clk_enable(struct clk *clk)
@@ -87,33 +88,6 @@ static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
 	return clk->parent->set_rate(clk->parent, rate);
 }
 
-/*
- *  get the system pll clock in Hz
- *
- *                  mfi + mfn / (mfd +1)
- *  f = 2 * f_ref * --------------------
- *                        pd + 1
- */
-static unsigned long mx1_decode_pll(unsigned int pll, u32 f_ref)
-{
-	unsigned long long ll;
-	unsigned long quot;
-
-	u32 mfi = (pll >> 10) & 0xf;
-	u32 mfn = pll & 0x3ff;
-	u32 mfd = (pll >> 16) & 0x3ff;
-	u32 pd =  (pll >> 26) & 0xf;
-
-	mfi = mfi <= 5 ? 5 : mfi;
-
-	ll = 2 * (unsigned long long)f_ref *
-		((mfi << 16) + (mfn << 16) / (mfd + 1));
-	quot = (pd + 1) * (1 << 16);
-	ll += quot / 2;
-	do_div(ll, quot);
-	return (unsigned long)ll;
-}
-
 static unsigned long clk16m_get_rate(struct clk *clk)
 {
 	return 16000000;
@@ -188,7 +162,7 @@ static struct clk prem_clk = {
 
 static unsigned long system_clk_get_rate(struct clk *clk)
 {
-	return mx1_decode_pll(__raw_readl(CCM_SPCTL0),
+	return mxc_decode_pll(__raw_readl(CCM_SPCTL0),
 			      clk_get_rate(clk->parent));
 }
 
@@ -200,7 +174,7 @@ static struct clk system_clk = {
 
 static unsigned long mcu_clk_get_rate(struct clk *clk)
 {
-	return mx1_decode_pll(__raw_readl(CCM_MPCTL0),
+	return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
 			      clk_get_rate(clk->parent));
 }
 
@@ -488,7 +462,7 @@ static struct clk clko_clk = {
 };
 
 static struct clk dma_clk = {
-	.name = "dma_clk",
+	.name = "dma",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
@@ -539,7 +513,7 @@ static struct clk gpt_clk = {
 };
 
 static struct clk uart_clk = {
-	.name = "uart_clk",
+	.name = "uart",
 	.parent = &perclk[0],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
@@ -621,7 +595,7 @@ static struct clk *mxc_clks[] = {
 	&rtc_clk,
 };
 
-int __init mxc_clocks_init(unsigned long fref)
+int __init mx1_clocks_init(unsigned long fref)
 {
 	struct clk **clkp;
 	unsigned int reg;
@@ -652,5 +626,7 @@ int __init mxc_clocks_init(unsigned long fref)
 	clk_enable(&hclk);
 	clk_enable(&fclk);
 
+	mxc_timer_init(&gpt_clk);
+
 	return 0;
 }
diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c
index 686d8d2dbb2..97f42d96d7a 100644
--- a/arch/arm/mach-mx1/devices.c
+++ b/arch/arm/mach-mx1/devices.c
@@ -23,8 +23,11 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <mach/irqs.h>
 #include <mach/hardware.h>
 
+#include "devices.h"
+
 static struct resource imx_csi_resources[] = {
 	[0] = {
 		.start  = 0x00224000,
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index 2e4b185fe4a..7ae229bc1b7 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -16,15 +16,22 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
+#include <mach/irqs.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux-mx1-mx2.h>
+#include <mach/irqs.h>
+#ifdef CONFIG_I2C_IMX
+#include <mach/i2c.h>
+#endif
+#include <mach/iomux.h>
 #include "devices.h"
 
 /*
@@ -104,6 +111,55 @@ static struct platform_device flash_device = {
 };
 
 /*
+ * I2C
+ */
+
+#ifdef CONFIG_I2C_IMX
+static int i2c_pins[] = {
+	PA15_PF_I2C_SDA,
+	PA16_PF_I2C_SCL,
+};
+
+static int i2c_init(struct device *dev)
+{
+	return mxc_gpio_setup_multiple_pins(i2c_pins,
+			ARRAY_SIZE(i2c_pins), "I2C");
+}
+
+static void i2c_exit(struct device *dev)
+{
+	mxc_gpio_release_multiple_pins(i2c_pins,
+			ARRAY_SIZE(i2c_pins));
+}
+
+static struct pcf857x_platform_data pcf857x_data[] = {
+	{
+		.gpio_base = 4 * 32,
+	}, {
+		.gpio_base = 4 * 32 + 16,
+	}
+};
+
+static struct imxi2c_platform_data mx1ads_i2c_data = {
+	.bitrate = 100000,
+	.init = i2c_init,
+	.exit = i2c_exit,
+};
+
+static struct i2c_board_info mx1ads_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf857x", 0x22),
+		.type = "pcf8575",
+		.platform_data = &pcf857x_data[0],
+	}, {
+		I2C_BOARD_INFO("pcf857x", 0x24),
+		.type = "pcf8575",
+		.platform_data = &pcf857x_data[1],
+	},
+};
+#endif
+
+/*
  * Board init
  */
 static void __init mx1ads_init(void)
@@ -114,12 +170,19 @@ static void __init mx1ads_init(void)
 
 	/* Physmap flash */
 	mxc_register_device(&flash_device, &mx1ads_flash_data);
+
+	/* I2C */
+#ifdef CONFIG_I2C_IMX
+	i2c_register_board_info(0, mx1ads_i2c_devices,
+				ARRAY_SIZE(mx1ads_i2c_devices));
+
+	mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data);
+#endif
 }
 
 static void __init mx1ads_timer_init(void)
 {
-	mxc_clocks_init(32000);
-	mxc_timer_init("gpt_clk");
+	mx1_clocks_init(32000);
 }
 
 struct sys_timer mx1ads_timer = {
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c
new file mode 100644
index 00000000000..0e71f3fa28b
--- /dev/null
+++ b/arch/arm/mach-mx1/scb9328.c
@@ -0,0 +1,160 @@
+/*
+ * linux/arch/arm/mach-mx1/scb9328.c
+ *
+ * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
+ * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/interrupt.h>
+#include <linux/dm9000.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+
+#include "devices.h"
+
+/*
+ * This scb9328 has a 32MiB flash
+ */
+static struct resource flash_resource = {
+	.start	= IMX_CS0_PHYS,
+	.end	= IMX_CS0_PHYS + (32 * 1024 * 1024) - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data scb_flash_data = {
+	.width  = 2,
+};
+
+static struct platform_device scb_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev = {
+		.platform_data = &scb_flash_data,
+	},
+	.resource = &flash_resource,
+	.num_resources = 1,
+};
+
+/*
+ * scb9328 has a DM9000 network controller
+ * connected to CS5, with 16 bit data path
+ * and interrupt connected to GPIO 3
+ */
+
+/*
+ * internal datapath is fixed 16 bit
+ */
+static struct dm9000_plat_data dm9000_platdata = {
+	.flags	= DM9000_PLATF_16BITONLY,
+};
+
+/*
+ * the DM9000 drivers wants two defined address spaces
+ * to gain access to address latch registers and the data path.
+ */
+static struct resource dm9000x_resources[] = {
+	[0] = {
+		.name	= "address area",
+		.start	= IMX_CS5_PHYS,
+		.end	= IMX_CS5_PHYS + 1,
+		.flags	= IORESOURCE_MEM	/* address access */
+	},
+	[1] = {
+		.name	= "data area",
+		.start	= IMX_CS5_PHYS + 4,
+		.end	= IMX_CS5_PHYS + 5,
+		.flags	= IORESOURCE_MEM	/* data access */
+	},
+	[2] = {
+		.start	= IRQ_GPIOC(3),
+		.end	= IRQ_GPIOC(3),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL
+	},
+};
+
+static struct platform_device dm9000x_device = {
+	.name		= "dm9000",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dm9000x_resources),
+	.resource	= dm9000x_resources,
+	.dev		= {
+		.platform_data = &dm9000_platdata,
+	}
+};
+
+static int mxc_uart1_pins[] = {
+	PC9_PF_UART1_CTS,
+	PC10_PF_UART1_RTS,
+	PC11_PF_UART1_TXD,
+	PC12_PF_UART1_RXD,
+};
+
+static int uart1_mxc_init(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+			ARRAY_SIZE(mxc_uart1_pins), "UART1");
+}
+
+static int uart1_mxc_exit(struct platform_device *pdev)
+{
+	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
+			ARRAY_SIZE(mxc_uart1_pins));
+	return 0;
+}
+
+static struct imxuart_platform_data uart_pdata = {
+	.init = uart1_mxc_init,
+	.exit = uart1_mxc_exit,
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&scb_flash_device,
+	&dm9000x_device,
+};
+
+/*
+ * scb9328_init - Init the CPU card itself
+ */
+static void __init scb9328_init(void)
+{
+	mxc_register_device(&imx_uart1_device, &uart_pdata);
+
+	printk(KERN_INFO"Scb9328: Adding devices\n");
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init scb9328_timer_init(void)
+{
+	mx1_clocks_init(32000);
+}
+
+static struct sys_timer scb9328_timer = {
+	.init	= scb9328_timer_init,
+};
+
+MACHINE_START(SCB9328, "Synertronixx scb9328")
+    /* Sascha Hauer */
+	.phys_io	= 0x00200000,
+	.io_pg_offst	= ((0xe0200000) >> 18) & 0xfffc,
+	.boot_params	= 0x08000100,
+	.map_io		= mxc_map_io,
+	.init_irq	= mxc_init_irq,
+	.timer		= &scb9328_timer,
+	.init_machine	= scb9328_init,
+MACHINE_END