Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (257 commits)
  [ARM] Update mach-types
  ARM: 5636/1: Move vendor enum to AMBA include
  ARM: Fix pfn_valid() for sparse memory
  [ARM] orion5x: Add LaCie NAS 2Big Network support
  [ARM] pxa/sharpsl_pm: zaurus c3000 aka spitz: fix resume
  ARM: 5686/1: at91: Correct AC97 reset line in at91sam9263ek board
  ARM: 5640/1: This patch modifies the support of AC97 on the at91sam9263 ek board
  ARM: 5689/1: Update default config of HP Jornada 700-series machines
  ARM: 5691/1: fix cache aliasing issues between kmap() and kmap_atomic() with highmem
  ARM: 5688/1: ks8695_serial: disable_irq() lockup
  ARM: 5687/1: fix an oops with highmem
  ARM: 5684/1: Add nuc960 platform to w90x900
  ARM: 5683/1: Add nuc950 platform to w90x900
  ARM: 5682/1: Add cpu.c and dev.c and modify some files of w90p910 platform
  ARM: 5626/1: add suspend/resume functions to amba-pl011 serial driver
  ARM: 5625/1: fix hard coded 4K resource size in amba bus detection
  MMC: MMCI: convert realview MMC to use gpiolib
  ARM: 5685/1: Make MMCI driver compile without gpiolib
  ARM: implement highpte
  ARM: Show FIQ in /proc/interrupts on CONFIG_FIQ
  ...

Fix up trivial conflict in arch/arm/kernel/signal.c.

It was due to the TIF_NOTIFY_RESUME addition in commit d0420c83f ("KEYS:
Extend TIF_NOTIFY_RESUME to (almost) all architectures") and follow-ups.

1 files changed, 0 insertions, 43 deletions

diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index b48581e7ded..5592cdb8d0a 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -16,7 +16,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/fsl_devices.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -40,18 +39,6 @@ static unsigned int devboard_pins[] = {
 	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
 	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
 	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
-	/* USB OTG */
-	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
-	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
-	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
-	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
-	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
-	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
-	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
-	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
-	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
-	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
-	MX31_PIN_USB_OC__GPIO1_30,
 };
 
 static struct imxuart_platform_data uart_pdata = {
@@ -111,33 +98,6 @@ static struct imxmmc_platform_data sdhc2_pdata = {
 	.exit	= devboard_sdhc2_exit,
 };
 
-static struct fsl_usb2_platform_data usb_pdata = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_ULPI,
-};
-
-#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
-#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
-
-static void devboard_usbotg_init(void)
-{
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
-
-	gpio_request(OTG_EN_B, "usb-udc-en");
-	gpio_direction_output(OTG_EN_B, 0);
-}
-
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -151,7 +111,4 @@ void __init mx31moboard_devboard_init(void)
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
-
-	devboard_usbotg_init();
-	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }